Fix tst_qquicktext::hover()

Task-number: QTBUG-36938
Change-Id: I28da25235ae7b8805ebc474777a5edd43ceef941
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>

Canvas: do not emit paint signal when invisible

Task-number: QTBUG-31830
Change-Id: I23c6fc822547120f14c2d9a09f01a8f985745e2a
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>

Revert "Fix item polishing"

This caused items like positioners and itemviews to not
relayout or update as appropriate when items were hidden,
and therefore caused problems all over in eg. controls.

This reverts commits
- 43f983350a548b1b663ea07a0e87e4cc58834214
- 01e609e9fa0ca1317e0f4eff4802a79584450357
- 439f31f128e70ecae16544ee7041695c60e0b2d6

Task-number: QTBUG-36954
Task-number: QTBUG-36934
Task-number: QTBUG-31830
Change-Id: If04cdce51206568c360a45e24efc0bd04764750b
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>

Fix behavior when starting/stopping multiple QML profilers at once

Make sure they're all inserted into the m_startTimes map before any of
them is actually stopped. Otherwise multiple "Complete" messages can be
generated for only one profiling session.

For consistency, also allow all profilers to be started at the same
time with only one call to startProfiling().

Task-number: QTCREATORBUG-11532
Change-Id: I8f80e2f7432c31d5911e139f9632c36f2494cb96
Reviewed-by: Kai Koehne <kai.koehne@digia.com>

Mark tst_qquickpathview insignificant on OS X

Task-number: QTBUG-27740
Change-Id: I0dbf74b9fb8a4e7542d9d5b3c4f1d0516b04cd36
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>

qmlplugindump: adding isComposite

Change-Id: Ia742c26402156b09bc91590cef6a10755a8df754
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Reviewed-by: Alan Alpert <aalpert@blackberry.com>

Make GridView/ListView attached "view" property available to all delegate types

This is useful for accessing the view (e.g. "width", "cellWidth", ... properties)
from within section (ListView only), header, footer and highlight delegate components.

A typical usecase are components that are used in multiple views and therefore
cannot use the views's id for access.

The only attached property valid for those non-item delegates is "view". This
has been added to the documentation.

Change-Id: I33d976da778be23ed531a3b193ceee95ed9800d2
Task-number: QTBUG-32836
Reviewed-by: Alan Alpert <aalpert@blackberry.com>

Fix global object handling in worker script JS files.

Task-number: QTBUG-36874
Task-number: QTBUG-36881
Change-Id: Iacf4807dd37862e792ad1ba4ce540a6d48f1e495
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>

Add double-click to QQuickWidget

Task-number: QTBUG-36935
Change-Id: I498561f6bbd5a9b279034d16ef5ae4fb36607ed3
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>

tst_qquickpathview: show window before flicking

It's uncertain whether this caused any actual CI failures, but other
tests show the window first, and this one tests interactive
functionality so it makes sense that it should be visible.

Change-Id: I92c26ce596f556765917409ca4e9037bdaccfa23
Reviewed-by: Jani Heikkinen <jani.heikkinen@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>

Add support for scanning javascript files.

Javascript may contain ".import" pragmas/statements,
which should be treated in a similar way as qml file
imports.

Add findQmlImportsInJavascriptFile() which extracts and
parses the .import lines. Refactor findQmlImportsInFile()
to handle both .qml and .js and call out to the correct
parsing function.

Add "-jsFiles" for specifying javascript
files on the command line similar to "-qmlFiles".

Task-number: QTBUG-35349

Change-Id: I6b8e0cc254c1edcf16940bec5cfda7c2637f115e
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>

Fix crashes and incorrect extension queries on GL3+

glGetString(GL_EXTENSIONS) is deprecated in OpenGL 3.0+.
This means that in core profiles on 3.2+ (or without the fwd
compatibility bit on 3.0/3.1), the call is not supported and may
return NULL. This causes a crash in at least one place where we
try to blindly strstr the result. The correct solution is to use
QOpenGLContext::extensions() and hasExtension() which is prepared
to handle GL3+.

Change-Id: I52fec7dcee001cdc0933af03f5eed4b7c822b2bb
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>

Introduced a few more signals to QQuickWindow.

Also marked the new afterAnimation() signal as \since 5.3 and
introduced proper revisioning on the new signals.

[Changelog][QtQuick] Added QQuickWindow::afterSynchronizing(),
openglContextCreated(), sceneGraphAboutToStop(). Useful for
deeper integration with the rendering.

Change-Id: I5532b310506c2432325595e55ef9307b8934abee
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>

Fix wrong assert in QSGRenderLoop::setInstance

The assert before test not if the scoped pointer is null but the pointer
which was holding the scoping pointer.

Task-number: QTBUG-36932
Change-Id: I7a5e51752446556c1796bb677fe69cbceffdd3e0
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>

qmlplugindump: adding writeBooleanBinding to write booleans

Change-Id: I13077ad0d6522d91af0dab7d7bc30346b188ee4b
Reviewed-by: Alan Alpert <aalpert@blackberry.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>

Register the QML profiler's animation callback from the GUI thread

QUnifiedTimer is thread-local, so that a different object is returned
from instance() for each thread. This patch makes sure we register to
the one that performs the animations.

Task-number: QTCREATORBUG-11536
Change-Id: I23c3ff49f94668517b9894298a4d770a8c30e705
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>

Don't needlessly flush start times when stopping profiling

QQmlProfilerService::messageReceived() can call stopProfiling() multiple
times in a row. If we flush the start times every time we get
inconsistent data in the client. Profiler adapters should be removed
from the start times when they're deleted, though.

Task-number: QTCREATORBUG-11532
Change-Id: I6820971b7a93a7337cd8ad1b7b8b5aafdd654ab5
Reviewed-by: Kai Koehne <kai.koehne@digia.com>

Determine whether or not an object literal requires a sparse array at compile time

Change-Id: Ieb7f6ee97a4f251f1e2369850ebb9e2931f84ac1
Reviewed-by: Lars Knoll <lars.knoll@digia.com>

Clean up object literal handling with integral indices

* Object literals with array indices are now created with one
  run-time call, instead of an initial one for non-integral keys
  followed by sub-sequent define_builtin_property calls.

* Cleaned up propert name retrieval. Instead of using a visitor,
  it's easier to define a virtual method on the PropertyName type.  The visitor
  doesn't buy us much as it's not possible to recurse within property names, and
  this way we can use it also from the function scanner to correctly determine
  the number of arguments needed for object literal initalizations.

* Similarly the duplicated/common name member for all property assignments
  has been moved into PropertyName, for convenient access without AST casts.

* Removed now unused builtin_define_property/settergetter functions from IR,
  run-time and moth.

Change-Id: I90d54c81ea5f3f500f4f4a9c14f7caf5135e7f9f
Reviewed-by: Lars Knoll <lars.knoll@digia.com>

Merge remote-tracking branch 'origin/release' into stable

Change-Id: I68fd0e1d837bcd918c8efaf67fa88dee4a90b3be

Smaller cleanup

Cleanup the code to generate a swapValues instruction
to only require one code path for 32/64 bit. In
addition, this seems to be slightly faster even on
x86-64.

Change-Id: I0584c3eb5249606ca7541abfbce227e5cb44711f
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>

Clean up our internal namespaces

QQmlJS::MASM -> QV4::JIT
QQmlJS::V4IR -> QV4::IR

Change-Id: I707e8990459114a699c200fe3c22cec3c8df1afc
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>

Move binops out of the isel

Move the binop handling into qv4binop* to clean up the
code and ease maintenance.

Change-Id: I0053380be7f326a2100302a63e921698a5b28c2a
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>

Move unops into it's own file

Change-Id: I17aaff4d044608462e1edabc5612685591b3a433
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>

Move the Assembler class into it's own file

Change-Id: I9968b3ae5ad5fbad3490e08e173c22e4a643c91f
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>

Move JIT infrastructure into it's own directory

This is a starting point to clean up some of the
code base for the JIT.

Change-Id: I388ce8df7d4ab87095e227cf36643f4be2594b7d
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>

Remove unused method

Change-Id: I03d30ef5b06408d4d482e81f86bdc27c71a5d7e8
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>

Really eliminate a|0 and b&(-1)

The old code wasn't doing what it promised to do
and failed to remove these expressions.

Change-Id: I6718539fd528f293db537e47ff1c9ac4b27ada55
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>

Avoid some unneccesary instructions in swapValues

If source and target values are of the same type, there's no need
to write the type to the stack once again.

Change-Id: I3e1600407012f7bd7f2e5ba91b279b0421be9e68
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>

Mask rhs of shift operations in the IR for constants

Saves an instruction for shifts with contants

Change-Id: Ia12355d2fe2b9f80631056cda5edd79b45189e99
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>

Slightly simplify generated code for conversion to int

Take only one branch for integers, and save one instruction in
total.

Change-Id: I496f11fb3f080f71e9f415ebb4201228c63471b8
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>

Remove unused text stream

Change-Id: I23a1f5f2c6f782fab315db4725412a9473178b70
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>

Remove some code duplication

Change-Id: If336731a49bcb5e1812d50a39cb97e263f23b183
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>

Cleanup: Pass the function into the various SSA stages

Pass in the function object instead of the variablesCanEscape
flag. Cleans up the code a bit.

Change-Id: If2d24b30fb223fa03e27f75f40ad42b881b2b3a0
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>

Simplify some runtime code

Simpler code and delivers the same performance.

Change-Id: Ifd0398f0c123f4c21998f518574cf74cd7cf7e09
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>

Update QQuickTextInput's baselineOffset when only height changes

Task-number: QTBUG-36529

Change-Id: I2cd577013c4965e76c9350abaebb9b7a6e4e0270
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>

QQuickTimeLine: add missing time checks

The same check is done in QQuickTimeLine::pause(), move() and moveBy(),
where the time is passed as an argument. QQuickTimeLine::accel() and
accelDistance() calculate the time based on velocity and acceleration
or distance. With tiny values this calculation can result to a negative
time due to integer overflow.

Task-number: QTBUG-35046
Change-Id: I000e73d3f787375946e8f87a5d24153ae919bc8d
Reviewed-by: Michael Brasser <michael.brasser@live.com>

the qmlextensionplugins example and a bunch of reference examples need QtQuick

Task-number: QTBUG-36893
Change-Id: If1f937113b651fd2255f8004739f2c601e3826bf
Reviewed-by: Alan Alpert <aalpert@blackberry.com>

the shell example and a bunch of reference examples need no QtGui

Task-number: QTBUG-36893
Change-Id: I51e402c90bd727cd3066788e0864e887ab8cb9e4
Reviewed-by: Alan Alpert <aalpert@blackberry.com>

Add touch and wheel events to QQuickWidget

Change-Id: Idb444cbc62491469230c5a1f624d71cf20bce492
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>

Add an error signal to QQuickWindow

When nothing is connected to this signal, an error will be printed or,
in case of Windows, a message box will be shown. If there is something
connected, it is up to the application to handle the error.

[ChangeLog] Added a new sceneGraphError() signal to QQuickWindow
which applications can use to detect errors like OpenGL context creation
failures and react in their own custom ways.

Task-number: QTBUG-36138
Change-Id: I33b1e5e0e3f25872af67c5bb5ae937e3470b25f3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>

Fix missing depth and stencil buffer in QQuickWidget

Change-Id: I34f2015d63d3052b401a82bb4ac7340af94dca8c
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>

Avoid extra platformwindows with QQuickWidget

QQuickWidget is nice but does not work on platforms like eglfs
because it always creates a (hidden) platform window for the
QQuickWindow.

This is now fixed by avoiding calling create() on the window and
using the toplevel window of the QQuickWidget instead.

Change-Id: Ia552f7a16d8b913fb798fde04b9304c6d037a46c
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>

Don't use Vertexarrays

If custom Glcode is used and a buffer is not unbound
the drawcall will take the bound buffer over the
vertex array, so its a bad idea to use them, besides
the fact that in core profile buffers should be used.

Change-Id: I4107d85b664a0c67207652ae34c2569572fa6a8b
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>

Make sure we update filtering options on atlas textures.

We had had an optimization which tried to reduce state changes,
but filtering is also changed in QSGTexture::updateBindOptions
which Atlas::bind() didn't know anything about. Solution: don't
try to be so clever.

Task-number: QTBUG-35457
Change-Id: I39ac0106396921e1b652db2b2aa5a9923b35e825
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>

Prevent dangling pointer in QQuickShaderEffectSource.

Task-number: QTBUG-36931
Change-Id: Idb584a8703a8d93d2cbcd3feb7942476dc165a59
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>

Fix item polishing

After "Dont call updatePolish if an item is not visible" (439f31f) and
"Fix polishItems bug" (01e609e), desktop style animations for QtQuick
Controls were no longer running. This was because QQuickItem::polish()
no longer polished a _visible_ item when there were other _hidden_
items in the queue to be polished.

This change restores the old logic that QQuickWindow only keeps track
of visible items to be polished, whilst the idea of hidden items not
being polished still remains valid. QQuickItem is made responsible
for polishing itself if necessary when it becomes visible.

Task-number: QTBUG-36934
Change-Id: I4d48d3a3e2c841d337cd52ec4fd27092f84a8626
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>

Update QQmlAbstractProfilerAdapter documentation.

Change-Id: I11cce4e3494eb2eb06fa781a676cccf5eb2127a8
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>

Update QQuickWidget docs and changelog

Change-Id: I853295f31cf9367a8e11157c9ef0764174c614cf
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>

Add a signal for syncing external animation systems

[ChangeLog] QQuickWindow will now emit the afterAnimating() signal
from the gui thread before each scenegraph sync request.

Change-Id: I4897c82f75066238e781455d4fce4fb6bbe2558e
Reviewed-by: Pasi Keränen <pasi.keranen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>

Fix ListModel::setProperty() to accept date roles

Task-number: QTBUG-33564
Change-Id: Ifbc1c5014d41b26223c57fafdc616e9b4ddee5b8
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>

QQuickWidget example

Change-Id: I4211900ef6a04443bde0c95d074a4a29951b43b0
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>

Optimize QQuickItemParticle::prepareNextFrame().

This moves one hash lookup out of the inner loop, and most importantly
avoids detaching both the particle group hash and the particle data vector
on every iteration of the inner loop.

Change-Id: If9a127b347367ac9dc1e8ee738ff914784adb896
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Alan Alpert <aalpert@blackberry.com>

Ensure Behavior stops animating when a new value is set while disabled.

Otherwise the Behavior could cause the property value to end up in an
unwanted and inconsistent state. For example, in the following case:

x: myXValue
Behavior on x { NumberAnimation {} }

x could end up *not equal* to myXValue if myXValue was changed while
the Behavior was still animating but currently disabled.

Change-Id: I3826fdc3f48b2722e778638b116546db7e831e87
Reviewed-by: Martin Jones <martin.jones@jollamobile.com>

Make SmoothedAnimation and SpringAnimation smoothly transition again.

Fix regression introduced in Qt 5.0 when animation backend was
rewritten.

Task-number: QTBUG-36709
Change-Id: Ib8caa4bc6a38e3bb4c1d1d3961f775fdd2b342c7
Reviewed-by: Martin Jones <martin.jones@jollamobile.com>

Update glyph cache type/format logic to match qtbase changes

https://codereview.qt-project.org/#change,77791 unified the glyph format
between QFontEngine and QFontEngineGlyphCache.

Now that we're up to date with qtbase, we can unpin the dependency.

Change-Id: Ibcafccb741ce94b454ff7c469804f44fef7fe06f
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>

Do not add Images with invalid geometry to the scene graph.

Task-number: QTBUG-35656
Task-number: QTBUG-36050

Change-Id: Iea2d5303bdeb9c523e59ebcdc9f97288060be022
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>

Guarantee event's default state as not accepted

Before starting the evaluation of the event to check if it should be
accepted or not, set the state of the wheelEvent to not accepted. That
way, if the event is not accepted it will be propagated to others
elements.

Change-Id: I13a71db8e26c888adc03f1bfd3e46480d3b22b6f
Task-number: QTBUG-36774
Reviewed-by: Gustavo Pichorim Boiko <gustavo.boiko@canonical.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>

Pin qtbase to merge from dev while we integrate glyph cache changes

Change-Id: I4ab46977ec0f137e2bb5a41c67dc09ee962a8b82
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>

Revert "Fix scenegraph backend API for material shaders."

This reverts commit a8a90519cb35481e96fe8889846bfaa424e13e8a. The
same functionality is now available in a more extensible way via
the program binary support recently added.

Change-Id: I07b1939611a76858e65605ce625da6c4cbca2114
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>

Merge "Merge remote-tracking branch 'origin/stable' into dev" into refs/staging/dev

[new compiler] Report errors at type compile time for invalid group property access

Change-Id: I36a945dd4e4c0e699a2b34af066eae4d4c73a588
Reviewed-by: Lars Knoll <lars.knoll@digia.com>

[new compiler] Fix error reporting null object group property access

The new code path reported line and column, the latter was missing from the old
code path and is easily added.

Change-Id: I730e56f0fe4e99091dfb10e5f601faf1d3b8949c
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>

Merge remote-tracking branch 'origin/stable' into dev

Conflicts:
src/qml/jsruntime/qv4functionobject.cpp
src/quick/scenegraph/coreapi/qsgbatchrenderer_p.h

Change-Id: Id164f6c3b45501aa466908659ec4e3b957323753

Unpin qtbase in preperation for merge to stable

Change-Id: I833937c85269dfaca7f28fd06c3f55729037b800
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>

Properly export QQuickProfiler

We want to access the profiler from quickwidgets as well as from quick
itself. Also, use better syntax for includes in qquickprofiler_p.h

Change-Id: Ifee04bae84521e8f028e7e2d272824449338b88a
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>

Introducing QQuickWidget

Renders into an FBO, and provides a texture that is
composed by the QPA/widget kernel compositor.

Also introducing QQuickRenderControl, which is private
API for now.

Change-Id: I710c16e1506124a17f91e87344496471803a448b
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>

Update pin of qtbase so that the qtquickcontrols revdep builds

Change-Id: I3dbbad674be889ec6ca0c2ec66e2c995c5b0839b
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>

V4 JIT: enable register allocator on Linux/ARM.

Change-Id: Ieab86edebcc265063904e78c8c8d0014ace64199
Reviewed-by: Lars Knoll <lars.knoll@digia.com>

V4 JIT: move registers for regalloc out of method.

This is a clean-up: by moving the description of the registers available
for allocation out of the run method, the method gets easier to read,
and the lists are easier to extend when adding more platforms.

Change-Id: I840a15cda0e02488b7e038aa23cedd23508ed736
Reviewed-by: Lars Knoll <lars.knoll@digia.com>

V4 ARM JIT: make CONFIG+=disassembler work on ARM.

Change-Id: I164813c8939849e63103c447a7f64699003d00da
Reviewed-by: Lars Knoll <lars.knoll@digia.com>

[new compiler] Fix reported error location for unknown type assignments

Change-Id: Ib564002f790921d4e233bb56d1a6ff6ef6aa6c2b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>

[new compiler] Compile time check for objects assigned to script strings

Change-Id: I873bded73a0d2210910c496312fb3b7b04e4a65f
Reviewed-by: Lars Knoll <lars.knoll@digia.com>

[new compiler] Fix location of id property in error messages

Change-Id: If7cde17acb1dd63a51e2e31415533a21302d8b41
Reviewed-by: Lars Knoll <lars.knoll@digia.com>

[new compiler] Implement compile time error handling for lists

Change-Id: Ic26e8a01995c296ab9cd4deb8714a5cf17cfdf2b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>

[new compiler] Match class and file name

QmlObjectCreator -> QQmlObjectCreator

Change-Id: I23da2d9c7fa0dcd760f5cc695c1759b44d1e72f0
Reviewed-by: Lars Knoll <lars.knoll@digia.com>

[new compiler] Cleanup object creator members

Collect variables shared across recursive instances in a SharedData
structure, get rid of some other members.

Change-Id: I8d52fbb34820ce17d754b91c3fdee9e534a95753
Reviewed-by: Lars Knoll <lars.knoll@digia.com>

[new compiler] Fix test with aggressive gc

We need a scope object protector right after creating the JS wrapper,
which is right after creating the VME meta object.

Change-Id: I76668027486a44bab35a3193b4c1c6fbab5c3e0e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>

Reduce memory usage for object literals with integral keys

Be more aggressive about using sparse arrays for object literals than for
regular array handling, to reduce the memory usage in this use case. The
current heuristic is that indices over 0x1000 switch to sparse, which means a
simple { "3000" : "test" } creates a long vector instead of a sparse array.

Task-number: QTBUG-36803
Change-Id: Id05c76f0f597cd016114cd27ec54effbebe26e48
Reviewed-by: Michael Brasser <michael.brasser@live.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>

Fix spurious binding loop errors in QtQuick Controls and other places

Commit 5dc7649f5ad7dca6e13707e827d001c3f118a6ef caused this regression,
as a result of lazy binding evaluation and self-referencing objects:

    import QtQml 2.0
    QtObject {
        property QtObject objectRef : subObject
        property QtObject blah: QtObject {
            id: subObject
            property int value: 42
            property int blah: objectRef.value
        }
    }

When blah is evaluated, we now lazily initialize objectRef - as opposed to
previously throwing an exception and then when objectRef gets initialized we
re-evaluate blah due to its dependency. So while evaluating "objectRef.value"
for blah, we initialize objectRef by evaluating "subObject", and after doing
that we write the "objectRef" property. That triggers a change notification,
and since the objectRef reference for blah is a compile-time known dependency,
the change notification triggers a re-evaluation of "blah", which is the
binding loop.

What's wrong here is that we register the pre-defined captures before the
code execution, when we should register them after the evaluation, or strictly
speaking after flushing pending bindings, like it is the case for individual
properties in bindings where we could not pre-determine the depenencies.

Change-Id: I9fb0c7583cba9d9b71c9ada2791fe87574f6ef44
Reviewed-by: Lars Knoll <lars.knoll@digia.com>

Prospective iOS build fix for tst_qqmlmoduleplugin

Include unistd.h for _PC_CASE_SENSITIVE

Change-Id: I0c57d7d84fa4c7379502dbf95fd22476724d5fa3
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>

iOS build fix for qmlplugindump

Do the docker startup thing only for Mac OS X, i.e. using the macx
scope in the .pro file, not mac.

Change-Id: I06266ace2ae0f8a3685b26983a7b2cd5815e3e99
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>

Prospective build fix in the CI system for iOS

Tools contains the import scanner, which is needed by examples.

Change-Id: Ib32338b4b32bf6dd7f1f4a7a2cd5af14ef7eec7a
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>

Avoid Nearest mipmap filtering for BorderImage.

QSGOpaqueTextureMaterial has Nearest as the default mipmap
filtering, which BorderImage inherited. That default value is
not ideal, but I would prefer to not change behavior, so
request None from borderimage instead.

Change-Id: I9857f1434ae9f067c3b0e460ea552d3e854b9d64
Reviewed-by: aavit <eirik.aavitsland@digia.com>

Reapply 612785f39e325b0578be89e09b0e32d7d08d471e fixing GCC warnings

See 612785f39e325b0578be89e09b0e32d7d08d471e for details. The warning is
exactly the same as before, with the exact same solution as before.

Change-Id: I2f6cbc64234696f1d240611f376ab5daf8d0f89c
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>

Add dedicated QML profiler and adapter

The remaining "profiling" parts of the QML profiler service are
engine specific and are best accessed through their own adapter.

Change-Id: Idb763104bdd80e4dabdf132ec1a496b9bc9f6f46
Reviewed-by: Kai Koehne <kai.koehne@digia.com>

Move QtQuick profiling to own profiler adapter

The QtQuick parts of the QML profiler service thus become a proper
global profiler which can be independently enabled and disabled.

Change-Id: Ifad03801cab2be66a264fc46fdebdae582fcc99b
Reviewed-by: Kai Koehne <kai.koehne@digia.com>

Pin qtbase version so we can integrate glyph format changes

Will be unpined along with an update that matches the changes in
https://codereview.qt-project.org/#change,77791

Change-Id: I5b9572d21e2cca8dc0078eb0079f6d42af6dd6d4
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>

Fix crash when the currently running binding is deleted.

Stop capturing properties once the expression is deleted. The
following example triggers invalid read/write memcheck errors
when trying to capture propFromParentScope:

Item {
    property real testProp: {
        if (x == 0) testProp = 7
        return propFromParentScope
    }
}

Which can eventually lead to a crash.

Task-number: QTBUG-36798
Change-Id: I233de2c81498884df0563e8ce155752845aafcfb
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>

Ensure m_opacityChange is cleared at the beginning of each frame.

Change-Id: Ic5eb5e1955e09884f98975a8ac74b42f00e233d7
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>

Update scenegraph docs to be in line with Qt 5.2 behavior changes.

Change-Id: Id21386e6dc85bb7e109d9bd03e80f306c0a99733
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>

Provide scenegraph backend API for marking scenegraph nodes dirty.

Prior to Qt 5.2 tracking of dirty state was automatically handled by
QSGNode. With Qt 5.2 this approach has changed. Moving forward render
state is ideally tracked outside of QSGNode; however, we continue to
provide a way to track it in the node itself, to support custom renderers
and the default node updater.

Change-Id: I78907caee1b64b94a2bae2d8b577210f1955a431
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>

Fix polishItems bug

updatePolish is not called for items which are not visible.
However if a polish is scheduled, updatePolish has to be called when the item
becomes eventually visible.

This patch makes sure, that invisible items are not removed from the itemsToPolish list.

Change-Id: I1ad929dc6de8e61edbd1c4df88ae5bc951979ff1
Reviewed-by: Ulf Hermann <ulf.hermann@digia.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>

V4: Do not reverse-propagate int32 conversion through unary minus.

Conversion to int32 might truncate, and because int32 is two's
complement, INT_MIN might get converted incorrectly.

Change-Id: Iaf893d3bd619f4c5791654e609f96cffca5c6917
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>

V4 IR: remove unused phi targets.

Remove all phi nodes whose target temps have no uses. This obvious
optimization was missing.

Change-Id: I24354e225ba7b01a3c2a6f4b2e40dd78d6ee3d7d
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>

V4 IR: changed worklist used while doing optimizations.

Change the worklist in the optimizeSSA function to allow only one entry
for a statement. This prevents re-processing a statement multiple times,
and could lead to crashes when the statement was removed in an earlier
pass.

Change-Id: I2f09cf74525cfe19708ec7a8bc6d555218625e87
Reviewed-by: Lars Knoll <lars.knoll@digia.com>

Compile fix for MSVC2013

This fixes an inclusion error caused by eb8a091 under WinRT x64 MSVC2013.

Change-Id: I3ebae0788264f4e3ccc0ae9f2bb4dbc4cceaa155
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Reviewed-by: Ulf Hermann <ulf.hermann@digia.com>

Test case for V4 profiler and its adapter

Change-Id: I64af195a16189cd1306ca80d13c0ef002fa31f59
Reviewed-by: Kai Koehne <kai.koehne@digia.com>

Enable program binary support through QSGRenderContext API.

Change-Id: I4eecff3c8a2c727d38d394305d248eddeef87e8e
Reviewed-by: Michael Brasser <michael.brasser@live.com>

V4 profiler adapter

This adapter attaches the V4 profiler to the QML profiling
infrastructure.

Change-Id: Ifaf77a3ba0790bc56d4b155260b0e05593ac799e
Reviewed-by: Kai Koehne <kai.koehne@digia.com>