Anup Patel [Sat, 30 Mar 2019 13:13:49 +0000 (18:43 +0530)]
include: Make mstatus parameter optional for get_insn()
The mstatus parameter of get_insn() is used to return MSTATUS CSR
value which get_insn() saw. Most of the get_insn() callers don't
use the value returned in mstatus so this patch makes mstatus
parameter optional for get_insn().
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Anup Patel [Sat, 30 Mar 2019 12:13:23 +0000 (17:43 +0530)]
include: Rename sbi_unpriv.h to riscv_unpriv.h
The sbi_unpriv.h has quite a few load_xyz() and store_xyz() helper
routines based on RISC-V inline assembly for unpriviledged accesses
from M-mode. These helper routines are similar to helper routines
present in riscv_locks.h, riscv_io.h, and riscv_atomic.h so let's
rename sbi_unpriv.h to riscv_unpriv.h.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Anup Patel [Sat, 30 Mar 2019 12:05:48 +0000 (17:35 +0530)]
lib: Remove unused mepc arg from load_xyz() and store_xyz() functions
This patch removes unused mepc arg from load_xyz() and store_xyz()
unpriviledge access functions.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Bin Meng [Wed, 27 Mar 2019 14:58:49 +0000 (22:58 +0800)]
lib: Disable the boot prints if SBI_SCRATCH_NO_BOOT_PRINTS is set
Use the newly introduced "options" in "struct sbi_scratch" to
conditionally disable the boot prints.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Bin Meng [Wed, 27 Mar 2019 14:39:08 +0000 (22:39 +0800)]
lib: Group all prints during boot into sbi_boot_prints()
Refactor the codes a little bit to put all prints during boot into
sbi_boot_prints().
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Bin Meng [Wed, 27 Mar 2019 14:57:20 +0000 (22:57 +0800)]
firmware: Introduce "options" in "struct sbi_scratch"
Introduce "options" in "struct sbi_scratch" and firmware can update
it based on optional compile time flags before calling sbi_init().
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Bin Meng [Thu, 14 Mar 2019 08:12:44 +0000 (16:12 +0800)]
platform: plic: Fix comments of programming the interrupt enable register
The codes that currently program the interrupt enable register for
S-mode disagrees with what the comments say. Fix the comments.
While we are here, add one line comment to describe what is done
for M-mode too.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Atish Patra [Wed, 13 Mar 2019 18:08:31 +0000 (11:08 -0700)]
lib: Return ENOTSUPP incase of invalid SBI function ID
OpenSBI should show error trace only if any valid SBI function
does not perform as expected.
However, OpenSBI should show notify the caller with a negative
error if given SBI function ID is not valid.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Bin Meng [Wed, 13 Mar 2019 16:13:32 +0000 (00:13 +0800)]
platform: plic: Bypass interrupt ID 0's priority programming
Per PLIC spec, interrupt ID 0 is defined to mean "no interrupt".
We should bypass it.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Bin Meng [Wed, 13 Mar 2019 16:00:35 +0000 (00:00 +0800)]
platform: plic: Fix plic_set_priority()
At present plic_set_priority() ignores the 'source' and the priority
register to be programmed is constant. Fix it.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Atish Patra [Mon, 4 Mar 2019 21:58:37 +0000 (13:58 -0800)]
firmware: Move scratch setup to _start instead of _start_warm
Scratch space setup needs to be done once for reboot for each
hart. _start_warm may be called several times if hart hotplug
is implemented.
Move scratch space setup to the beginning so that it is done
only once.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Atish Patra [Tue, 12 Mar 2019 20:50:37 +0000 (13:50 -0700)]
lib: Fix full tlb flush behavior
Currently, global page mappings are not flushed if start and size
arguments are zero.
Flush entire TLB if both size and start argument is passed as zero.
Fixes : 90cb491 (lib: Implement sfence.vma correctly)
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Bin Meng [Tue, 12 Mar 2019 13:40:28 +0000 (21:40 +0800)]
platform: fu540: Fix cosmetic styling issues
There are some spaces or mixed usage of spaces and tabs in the macro
definition. Change to use tab consistently.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Bin Meng [Tue, 12 Mar 2019 13:32:35 +0000 (21:32 +0800)]
docs: firmware: Fix spelling of U-Boot
It's U-Boot, not U-boot.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Atish Patra [Sat, 9 Mar 2019 20:57:20 +0000 (12:57 -0800)]
lib: Implement sfence.vma correctly.
Currently, OpenSBI doesn't distinguish between sfence.vma
and sfence.vm asid calls. Moreover, it ignores the page
ranges and just flush entire TLB everytime.
Fix the sfence implementation by keeping all the tlb flush
info in scratch area.
The relevant Linux kernel code was added by
https://patchwork.kernel.org/project/linux-riscv/list/?series=89695
However, this patch is backward compatible with older version kernel
that doesn't have the above patches as well.
Fixes #87
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Alistair Francis [Fri, 8 Mar 2019 19:22:22 +0000 (11:22 -0800)]
lib: Create a sbi_ipi_data structure
Create a sbi_ipi_data structure that holds unpacked IPI information. At
the same time remove ipi_type from the sbi_scratch struct and use a
fixed offset to access it.
This structure fits in behind the sbi_scratch structure.
This fixes https://github.com/riscv/opensbi/issues/81
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Atish Patra [Wed, 6 Mar 2019 23:18:29 +0000 (15:18 -0800)]
firmware: Reset all registers and flush icache
A warm reset using reset button may put icache and registers
in non-coherent state.
Flush the icache and reset all registers for every hart.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Atish Patra [Wed, 6 Mar 2019 02:03:27 +0000 (18:03 -0800)]
firmware: Add nop to reduce bus traffic.
All the non-boot harts run in a tight loop which may cause a heavy load
on the memory bus. This may delay the boot hart to complete the cold boot
process.
Introduce few nop that will ease up the traffic.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Atish Patra [Wed, 6 Mar 2019 02:01:00 +0000 (18:01 -0800)]
Revert "firmware: Add a barrier instruction for wait for boot hart"
This reverts commit
05602e2bf4812533adcb7acb1a67e43726c0e7bb.
Introducing a fence causes warm reset issue to reappear. Revert it
for the time being.
Xiang Wang [Wed, 6 Mar 2019 07:29:34 +0000 (15:29 +0800)]
platform: Make the `platform` read-only
platform should be a read-only variable, if it is placed in the data
segment, it may be exploited.
Signed-off-by: Xiang Wang <wxjstz@126.com>
Atish Patra [Mon, 4 Mar 2019 22:08:17 +0000 (14:08 -0800)]
firmware: Reset all the general purpose registers to zero.
A warm reset by pressing the reset button may not initialize all the
registers to zero. Do it for every hart during warm boot.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Atish Patra [Wed, 27 Feb 2019 19:08:26 +0000 (11:08 -0800)]
firmware: Ensure the mtvec is updated.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Atish Patra [Thu, 28 Feb 2019 00:07:56 +0000 (16:07 -0800)]
firmware: Fix a typo
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Atish Patra [Thu, 28 Feb 2019 01:42:17 +0000 (17:42 -0800)]
lib:platform: Fix sbi_getc return type.
As per the current SBI specification, sbi_getc should return
an int instead of char.
In case of FIFO is empty, return -1 as per the specification.
Reported-by: Sergi Granell <xerpi.g.12@gmail.com>
Suggested-by:Thadeu Lima de Souza Cascardo <cascardo@cascardo.eti.br>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Xiang Wang [Mon, 4 Mar 2019 09:22:37 +0000 (17:22 +0800)]
firmware: Add a barrier instruction for wait for boot hart
Multi-core communication via memory requires the addition of a barrier
instructions to ensure cache coherency.
Signed-off-by: Xiang Wang <wxjstz@126.com>
Xiang Wang [Mon, 4 Mar 2019 09:17:08 +0000 (17:17 +0800)]
firmware: Move _boot_hart_done to the data section
Writable code section can cause some security problems, so move _boot_hart_done
to the data section
Signed-off-by: Xiang Wang <wxjstz@126.com>
Xiang Wang [Mon, 4 Mar 2019 03:20:58 +0000 (11:20 +0800)]
Add tags to .gitignore for being development friendly
Signed-off-by: Xiang Wang <wxjstz@126.com>
Andreas Schwab [Wed, 27 Feb 2019 11:57:56 +0000 (12:57 +0100)]
Fix missing quotes in Makefile
Andreas Schwab [Wed, 27 Feb 2019 11:53:07 +0000 (12:53 +0100)]
Fix makefile dependency generation
Anup Patel [Tue, 26 Feb 2019 16:54:59 +0000 (22:24 +0530)]
include: Bump-up version to 0.3
This patch updates OpenSBI version to 0.3 as part of
release preparation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Alistair Francis [Fri, 22 Feb 2019 23:02:55 +0000 (15:02 -0800)]
Makefile: Set the platform variables before parsing the platforms
Ensure the platform variable PLATFORM_RISCV_XLEN is set before we parse
the platform files.
This fixes the 32-bit openSBI FW_JUMP_ADDR.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Anup Patel [Fri, 22 Feb 2019 06:03:22 +0000 (11:33 +0530)]
include: Bump-up version to 0.2
This patch increases OpenSBI version to 0.2.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Anup Patel [Wed, 20 Feb 2019 08:48:12 +0000 (14:18 +0530)]
scripts: Add script for creating binary archive
This patch adds scripts/create-binary-archive.sh which helps
us create a common tarball containing headers, static library
and firmware ELFs for all platforms.
This script can be used for release purpose OR for compile
testing all platforms.
Example usage commands are as follows:
1) Binary release archive for 32bit systems
./scripts/create-binary-archive.sh -s "bin" -x 32 -d
2) Binary release archive for 64bit systems
./scripts/create-binary-archive.sh -s "bin" -d
3) Compile test for 32bit systems
./scripts/create-binary-archive.sh -x 32 -t
4) Compile test for 64bit systems
./scripts/create-binary-archive.sh -t
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Anup Patel [Wed, 20 Feb 2019 08:46:48 +0000 (14:16 +0530)]
Makefile: Rename compile_ld() to compile_elf()
The compile_ld() is actually used to create ELF files so
the name is misleading hence this patch renames it to
compile_elf(). We also rename LDFLAGS to ELFFLAGS because
these will be used for ELF creation only.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Atish Patra [Fri, 22 Feb 2019 02:04:07 +0000 (18:04 -0800)]
doc: Fix root partition details for fu540.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Anup Patel [Tue, 19 Feb 2019 12:41:22 +0000 (18:11 +0530)]
firmware: Improve low-level trap handler for M-mode to M-mode traps
This patch extends our low-level trap handler in fw_base.S for
handling M-mode to M-mode traps without overwritting stack.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Anup Patel [Tue, 19 Feb 2019 12:36:46 +0000 (18:06 +0530)]
include: Add PRILX define to help print unsigned long
The unsigned long is always machine word size. This means it is
4 bytes on 32bit system and 8 bytes on 64bit system.
This patch adds PRILX define for sbi_printf() which will help us
print unsigned long without worrying whether it is 32bit or 64bit
system.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Sergi Granell [Tue, 19 Feb 2019 06:35:06 +0000 (07:35 +0100)]
template: Fix some callback names
Sergi Granell [Mon, 18 Feb 2019 14:46:29 +0000 (15:46 +0100)]
template: Remove trailing ';'
Sergi Granell [Mon, 18 Feb 2019 14:40:25 +0000 (15:40 +0100)]
template: Fix typo in platform_final_init
There was a space instead of '_' in the function `platform_final_init`.
Atish Patra [Tue, 19 Feb 2019 07:18:04 +0000 (23:18 -0800)]
docs: Update unleashed platform guide.
Following updates to fu540 platform guide.
1. Update a section about flashing the firmware binary
to sdcard with correct partition identifier.
2. Refer the individual payload section.
3. Update uboot booting section.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Atish Patra [Tue, 19 Feb 2019 07:17:16 +0000 (23:17 -0800)]
docs: Add a payload section describing different payloads.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Atish Patra [Sat, 16 Feb 2019 05:47:37 +0000 (21:47 -0800)]
docs: Wrap text to 80 columns.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Atish Patra [Sat, 16 Feb 2019 04:57:12 +0000 (20:57 -0800)]
docs: Update about toolchain section.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Anup Patel [Tue, 19 Feb 2019 07:45:35 +0000 (13:15 +0530)]
Makefile: Use sed instead of awk to parse OpenSBI version
This patch replaces use of awk with sed in top-level makefile
to parse OpenSBI version from include/sbi/sbi_version.h.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Anup Patel [Mon, 18 Feb 2019 04:10:51 +0000 (09:40 +0530)]
Makefile: Fix error evaluating OPENSBI_CC_XLEN
We get following error evaluating OPENSBI_CC_XLEN on
Ubuntu-18.04:
/bin/sh: 1: Bad substitution
This patch fixes above error by using "awk" in string
assigned to OPENSBI_CC_XLEN and it also moves "Setup
compilation commands" before OPENSBI_CC_XLEN.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Anup Patel [Mon, 18 Feb 2019 13:09:02 +0000 (18:39 +0530)]
lib: Fix mask shift in sbi_ipi_send_many()
The mask shift in for-loop of sbi_ipi_send_many() is
broken with commit
918c1354b75c74b62f67c4e929551d643f035443
("lib: Improve delivery of SBI_IPI_EVENT_HALT")
This patch fix it.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Nick Kossifidis [Sun, 17 Feb 2019 21:43:41 +0000 (23:43 +0200)]
lib: Fix small typo on sbi_ipi.c
Nick Kossifidis [Sun, 17 Feb 2019 07:00:20 +0000 (09:00 +0200)]
lib: Improve delivery of SBI_IPI_EVENT_HALT
When sbi_ipi_send_many gets called with the current hartid
included on pmask (or when pmask is NULL), and we send
a HALT event, since the for loop works sequentially over
all hartids on the mask, we may send a HALT event to the
current hart before the loop finishes. So we will halt
the current hart before it can deliver a HALT IPI to the
rest and some harts will remain active.
Make sure we send an IPI to the current hart after we've
finished with everybody else.
Signed-off-by: Nick Kossifidis <mick@ics.forth.gr>
Nick Kossifidis [Sun, 17 Feb 2019 02:02:15 +0000 (04:02 +0200)]
platform: qemu-virt: Implement system shutdown
In order for QEMU to be compatible with Spike, it implements
a simple protocol used for reporting back the simulation's
status, through the memory-mapped "test finisher" device. We
use that protocol to make QEMU exit on system shutdown.
Signed-off-by: Nick Kossifidis <mick@ics.forth.gr>
Nick Kossifidis [Sun, 17 Feb 2019 01:52:44 +0000 (03:52 +0200)]
lib: Send IPI for all harts to hang on system shutdown
In case the platform specific method for shutting down
the system fails (or is not implemented), at least make
sure that all harts hang instead of just the current hart.
Signed-off-by: Nick Kossifidis <mick@ics.forth.gr>
Alistair Francis [Fri, 15 Feb 2019 22:56:53 +0000 (14:56 -0800)]
Makefile: Fix the assignment of OPENSBI_CC_XLEN
Previously OPENSBI_CC_XLEN was not being correctly assigned either 32 or
64. It also was not assigned before config.mk was parsed. Ensure that it
will always be assigned.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Alistair Francis [Fri, 15 Feb 2019 23:02:19 +0000 (15:02 -0800)]
Merge pull request #59 from avpatel/make-run
Add 'make run' command for platform specific run
Olof Johansson [Fri, 15 Feb 2019 03:46:47 +0000 (09:16 +0530)]
Makefile: Add 'make run' command for platform specific run
Makes for easy and quick build-run one-stop command.
For now only added for qemu targets. It can be added for
any platform having simulator/emulator (such as QEMU).
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Alistair Francis [Tue, 12 Feb 2019 23:39:38 +0000 (15:39 -0800)]
docs: fu540: Add steps for the Microsemi Expansion board
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Alistair Francis [Mon, 11 Feb 2019 22:12:57 +0000 (14:12 -0800)]
platform: fu540: Initial commit of Microsemi device tree
Add a device tree for th HiFive Unleashed that includes the Microsemi
PCIe root complex.
Once we have support for u-boot and in tree Linux kernel device trees
this device tree should be removed.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Alistair Francis [Tue, 12 Feb 2019 23:31:14 +0000 (15:31 -0800)]
platform: fu540: Fix missing newline
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Alistair Francis [Thu, 14 Feb 2019 22:47:41 +0000 (14:47 -0800)]
firmware: Ensure the payloads are 4 bit alligned
We expect the payloads to be 4 bit alligned as we later AND them
with ~0xf. As most of the addresses are manually specified we don't
really need this, but better to be over cautious.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Nick Kossifidis [Thu, 14 Feb 2019 03:37:13 +0000 (05:37 +0200)]
Makefile: Make sure ld is always aware of the target abi/emulation
On Makefile merge_objs calls ld without providing any hints
on the target so on a multilib toolchain for example it will
always pick the default one (elf64-littleriscv) which will
then result a failure when compiling on RV32 since the objects
will be 32bits and the target will be 64bits. The same happens
on compile_ld that calls gcc without CFLAGS so it doesn't
get mabi/march.
With this patch OpenSBI compiles on RV32 (PLATFORM_RISCV_XLEN=32),
I tested fw_jump.elf on qemu (but it doesn't boot the kernel yet
-bbl also doesn't boot the kernel so it may be something else).
Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Atish Patra [Wed, 13 Feb 2019 19:03:53 +0000 (11:03 -0800)]
firmware: Use CSR_<FOO> instead of <foo> for csr*
Some older toolchains may not have all the csr's defined. Update all
the csr functions to use the CSR_ #define values instead of the
toolchain defined values.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Atish Patra [Wed, 13 Feb 2019 02:32:58 +0000 (18:32 -0800)]
platform: Use CSR_<FOO> instead of <foo> for csr_*()
Some older toolchains may not have all the csr's defined. Update all
the csr functions to use the CSR_ #define values instead of the
toolchain defined values.
Suggested-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Atish Patra [Wed, 13 Feb 2019 02:32:06 +0000 (18:32 -0800)]
lib: Use CSR_<FOO> instead of <foo> for csr_*()
Some older toolchains may not have all the csr's defined. Update all
the csr functions to use the CSR_ #define values instead of the
toolchain defined values.
Suggested-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Atish Patra [Tue, 12 Feb 2019 21:02:58 +0000 (13:02 -0800)]
docs: Use normal hyphen instead of non-breaking hyphen
Usage non-breaking hyphen breaks make docs as doxygen doesn't know
how to handle this.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Anup Patel [Fri, 8 Feb 2019 07:17:01 +0000 (12:47 +0530)]
Makefile: Set ABI, ISA and Code Model in top-level make
This patch introduces following optional PLATFORM options:
PLATFORM_RISCV_XLEN -> RISC-V register width
PLATFORM_RISCV_ABI -> RISC-V GCC ABI
PLATFORM_RISCV_ISA -> RISC-V GCC ISA string
PLATFORM_RISCV_CODE_MODEL -> RISC-V GCC Code Model
If the above options are not provided by platform config.mk
or by command-line parameters then:
1. PLATFORM_RISCV_XLEN will be determined using toolchain
capability
2. PLATFORM_RISCV_ABI, PLATFORM_RISCV_ISA, and
PLATFORM_RISCV_CODE_MODEL is set to value best suited for
generic libsbi.a
As a result of these optional PLATFORM options, the
platform-cflags-y and platform-asflags-y is further
simplified for platform config.mk.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Anup Patel [Fri, 8 Feb 2019 04:43:07 +0000 (10:13 +0530)]
platform: qemu: Set FW_JUMP_ADDR and FW_PAYLOAD_OFFSET as-per XLEN
The current 4MB aligned FW_JUMP_ADDR and FW_PAYLOAD_OFFSET breaks
U-Boot on QEMU virt and sifive_u machines.
Instead of using 4MB aligned for both 32bit and 64bit systems, we
use different values based compiler XLEN. Another advantage of this
approach will be that our fw_payload.bin will smaller for 64bit
systems.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Anup Patel [Fri, 8 Feb 2019 04:16:12 +0000 (09:46 +0530)]
platform: template: Improve comments for FW_JUMP_ADDR and FW_PAYLOAD_OFFSET
Both FW_JUMP_ADDR and FW_PAYLOAD_OFFSET, should be:
1. 4MB aligned for 32bit system
2. 2MB aligned for 64bit system
Explicitly specify the above details in config.mk comments
for template platform.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Damien Le Moal [Thu, 7 Feb 2019 09:41:50 +0000 (18:41 +0900)]
docs: improve library usage document
Clarify the libraries descriptions.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Damien Le Moal [Thu, 7 Feb 2019 09:18:49 +0000 (18:18 +0900)]
docs: platform guide updates
Clarify platform support description.
Also fix some Typos, grammar and document style.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Damien Le Moal [Thu, 7 Feb 2019 09:11:41 +0000 (18:11 +0900)]
top: README.md updates
Clarify OpenSBI components explanation.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Alistair Francis [Wed, 23 Jan 2019 22:38:21 +0000 (14:38 -0800)]
Makefile: Ensure lgcc is included
This fixes errors like this:
undefined reference to `__umoddi3'
when buildilng for 32-bit systems
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Alistair Francis [Wed, 23 Jan 2019 17:29:55 +0000 (09:29 -0800)]
firmware: Use lw instead of lwu for 32-bit architectures
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Alistair Francis [Wed, 23 Jan 2019 00:50:50 +0000 (16:50 -0800)]
platform: clint: Allow running on 32-bit systems
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Alistair Francis [Fri, 18 Jan 2019 19:36:32 +0000 (11:36 -0800)]
sbi_emulate_csr: Shift sbi_timer_value directly
csr_val is a tartget length based variable, so on 32-bit devices it's
only 32-bits. To avoid clearing the entire register perform both steps
in a single line.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Alistair Francis [Tue, 29 Jan 2019 17:59:31 +0000 (09:59 -0800)]
platform: qemu/virt: Move kernel start address to 4MB alligned
In order to support 32-bit guests move the start address to a 4MB
allignment. As 64-bit kernels have a requirement on being 2MB alligned
let's just make this the default for both 32 and 64 bit kernels.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Alistair Francis [Tue, 5 Feb 2019 21:51:32 +0000 (13:51 -0800)]
platform: template: Move kernel start address to 4MB alligned
In order to support 32-bit guests move the start address to a 4MB
allignment. As 64-bit kernels have a requirement on being 2MB alligned
let's just make this the default for both 32 and 64 bit kernels.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Alistair Francis [Fri, 18 Jan 2019 01:33:47 +0000 (17:33 -0800)]
platform/qemu/virt: Dynamically calculate xlen
The QEMU virt machine can be either 32 or 66 bit. Don't hard code the
CPU bit length and instead let the compiler determine it.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Alistair Francis [Wed, 6 Feb 2019 22:02:22 +0000 (14:02 -0800)]
sbi_ecall: Fix logical OR to be bitwise OR
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Andreas Schwab [Mon, 4 Feb 2019 14:05:36 +0000 (15:05 +0100)]
firwmare: don't expand macros in FW_PAYLOAD_PATH
Signed-off-by: Andreas Schwab <schwab@suse.de>
Andreas Schwab [Mon, 4 Feb 2019 11:48:26 +0000 (12:48 +0100)]
Makefile: don't disable built-in variables
Signed-off-by: Andreas Schwab <schwab@suse.de>
Olof Johansson [Mon, 4 Feb 2019 02:48:43 +0000 (18:48 -0800)]
Makefile: Don't rely on "echo -n"
Turns out it doesn't behave as expected on MacOS, it doesn't honor
-n and echoes that to the file instead. Add a slash and just let
the newline be there instead.
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Mon, 4 Feb 2019 02:49:20 +0000 (18:49 -0800)]
riscv_asm.h: Use CSR_<FOO> instead of <foo> for csr_read()
Some toolchains might not have all the CSRs available (as seen with
GCC 7.2). So, instead use the defined CSR_ values.
Signed-off-by: Olof Johansson <olof@lixom.net>
Anup Patel [Tue, 29 Jan 2019 12:30:36 +0000 (18:00 +0530)]
docs: Update doxygen config file
This patch updates doxygen config file to include
docs/platform_guide.md and docs/library_usage.md in
generated PDF document.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Anup Patel [Tue, 29 Jan 2019 12:29:02 +0000 (17:59 +0530)]
docs: Add library usage guide
This patch adds static library usage guide (i.e.
docs/library_usage.md).
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Anup Patel [Tue, 29 Jan 2019 12:26:14 +0000 (17:56 +0530)]
docs: Add platform support guide
This patch adds initial platform support guide (i.e.
docs/platform_guide.md).
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Anup Patel [Tue, 29 Jan 2019 12:24:17 +0000 (17:54 +0530)]
top: Fix typo in README.md
This patch renames <platform_sub_dir> to <platform_subdir> to be
consistent everywhere.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Atish Patra [Sun, 27 Jan 2019 07:47:17 +0000 (23:47 -0800)]
docs: Add a fu540 document.
Add a readme guide for fu540 with different types of build & booting steps.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Atish Patra [Sun, 27 Jan 2019 07:41:54 +0000 (23:41 -0800)]
docs: Typo fixes
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Atish Patra [Thu, 24 Jan 2019 22:48:45 +0000 (14:48 -0800)]
platform: fu540: Provide a compile time option selective hart booting.
Currently, only hart 1 is enabled for fu540 platform to support U-boot.
Introduce a compile time FU540_ENABLED_HART_MASK option so that specific
harts can be selected for booting. As fu540 is a multicore, we should
boot all cores by default except hart 0.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Anup Patel [Fri, 25 Jan 2019 05:49:22 +0000 (11:19 +0530)]
include: Add separate header for OpenSBI version
Currently, the OpenSBI version is in top-level Makefile so
firmware linking to OpenSBI static library have no-way to
know OpenSBI version.
This patch moves OpenSBI version from top-level Makefile to
sbi/sbi_version.h header which provides OPENSBI_VERSION_MAJOR
and OPENSBI_VERSION_MINOR defines.
NOTE: the SBI spec (or SBI ecall interface) version is
different. The SBI spec version is provided by functions
sbi_ecall_version_major() and sbi_ecall_version_minor().
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Damien Le Moal [Wed, 23 Jan 2019 06:14:13 +0000 (15:14 +0900)]
docs: README.md update
Reformat to fit lines within 80 chars, fix hyperlinks, etc.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Damien Le Moal [Wed, 23 Jan 2019 15:56:44 +0000 (00:56 +0900)]
docs/platform: Update QEMU platforms documentation
Mostly reformating. Some minor edits.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Damien Le Moal [Thu, 24 Jan 2019 03:51:22 +0000 (12:51 +0900)]
docs/platform: Add top level document file
List supported platforms and point to the platform specific document.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Damien Le Moal [Wed, 23 Jan 2019 07:21:59 +0000 (16:21 +0900)]
docs/firmware: Update FW_PAYLOAD documentation
Reformatting, typos, and various corrections.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Damien Le Moal [Wed, 23 Jan 2019 07:00:35 +0000 (16:00 +0900)]
docs/firmware: Update FW_JUMP documentation
Reformatting, typos, and various corrections.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Damien Le Moal [Wed, 23 Jan 2019 14:48:42 +0000 (23:48 +0900)]
docs/firmware: Add top level document file
Provide an overview of all supported firmware files and point to each
firmware type documentation file.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Damien Le Moal [Tue, 22 Jan 2019 07:42:54 +0000 (16:42 +0900)]
docs: Contribution guideline update
Explicitely mention that this project adheres to the Developer
Certificate of Origin (DCO) and include this short text.
Also reformat the file to have lines bounded at 80 chars and add some
more details regarding the expected commit message format.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Damien Le Moal [Wed, 23 Jan 2019 05:48:05 +0000 (14:48 +0900)]
top: Rename LICENSE file to COPYING.BSD
Also make sure that this file contains only the official BSD 2-clause
license text, nothing else.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Damien Le Moal [Thu, 24 Jan 2019 07:56:47 +0000 (16:56 +0900)]
platform: add template platform files
Create commented template files to use as a base for new platforms
support implementation.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Anup patel [Thu, 24 Jan 2019 06:11:10 +0000 (11:41 +0530)]
all: Update copyright header in all files
This patch updates copyright header in all files as follows:
1. Makes "SPDX-License-Identifier: BSD-2-Clause" as first line
2. Change copyright year to 2019 for Western Digital
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Anup Patel [Wed, 23 Jan 2019 03:30:35 +0000 (09:00 +0530)]
include: Use TRUE/FALSE as return values in sbi_platform_hart_disabled()
The sbi_platform_hart_disabled() returns bool hence explicitly return
TRUE or FALSE instead of 1 or 0.
Signed-off-by: Anup Patel <anup.patel@wdc.com>