review.tizen.org Git - platform/kernel/linux-rpi.git/log

usb: gadget: composite: Inform controller driver of self-powered

commit 5e5caf4fa8d3039140b4548b6ab23dd17fce9b2c upstream.

Different configuration/condition may draw different power. Inform the
controller driver of the change so it can respond properly (e.g.
GET_STATUS request). This fixes an issue with setting MaxPower from
configfs. The composite driver doesn't check this value when setting
self-powered.

Cc: stable@vger.kernel.org
Fixes: 88af8bbe4ef7 ("usb: gadget: the start of the configfs interface")
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: f_fs: Fix use after free issue as part of queue failure

commit f63ec55ff904b2f2e126884fcad93175f16ab4bb upstream.

In AIO case, the request is freed up if ep_queue fails.
However, io_data->req still has the reference to this freed
request. In the case of this failure if there is aio_cancel
call on this io_data it will lead to an invalid dequeue
operation and a potential use after free issue.
Fix this by setting the io_data->req to NULL when the request
is freed as part of queue failure.

Fixes: 2e4c7553cd6f ("usb: gadget: f_fs: add aio support")
Signed-off-by: Sriharsha Allenki <sallenki@codeaurora.org>
CC: stable <stable@vger.kernel.org>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/20200326115620.12571-1-sallenki@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: topology: use name_prefix for new kcontrol

commit abca9e4a04fbe9c6df4d48ca7517e1611812af25 upstream.

Current topology doesn't add prefix of component to new kcontrol.

Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Link: https://lore.kernel.org/r/009b01d60804$ae25c2d0$0a714870$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: dpcm: allow start or stop during pause for backend

commit 21fca8bdbb64df1297e8c65a746c4c9f4a689751 upstream.

soc_compr_trigger_fe() allows start or stop after pause_push.
In dpcm_be_dai_trigger(), however, only pause_release is allowed
command after pause_push.
So, start or stop after pause in compress offload is always
returned as error if the compress offload is used with dpcm.
To fix the problem, SND_SOC_DPCM_STATE_PAUSED should be allowed
for start or stop command.

Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/004d01d607c1$7a3d5250$6eb7f6f0$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: dapm: connect virtual mux with default value

commit 3bbbb7728fc853d71dbce4073fef9f281fbfb4dd upstream.

Since a virtual mixer has no backing registers
to decide which path to connect,
it will try to match with initial state.
This is to ensure that the default mixer choice will be
correctly powered up during initialization.
Invert flag is used to select initial state of the virtual switch.
Since actual hardware can't be disconnected by virtual switch,
connected is better choice as initial state in many cases.

Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Link: https://lore.kernel.org/r/01a301d60731$b724ea10$256ebe30$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: fix regwmask

commit 0ab070917afdc93670c2d0ea02ab6defb6246a7c upstream.

If regwshift is 32 and the selected architecture compiles '<<' operator
for signed int literal into rotating shift, '1<<regwshift' became 1 and
it makes regwmask to 0x0.
The literal is set to unsigned long to get intended regwmask.

Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Link: https://lore.kernel.org/r/001001d60665$db7af3e0$9270dba0$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: track reloc roots based on their commit root bytenr

[ Upstream commit ea287ab157c2816bf12aad4cece41372f9d146b4 ]

We always search the commit root of the extent tree for looking up back
references, however we track the reloc roots based on their current
bytenr.

This is wrong, if we commit the transaction between relocating tree
blocks we could end up in this code in build_backref_tree

  if (key.objectid == key.offset) {
  /*
   * Only root blocks of reloc trees use backref
   * pointing to itself.
   */
  root = find_reloc_root(rc, cur->bytenr);
  ASSERT(root);
  cur->root = root;
  break;
  }

find_reloc_root() is looking based on the bytenr we had in the commit
root, but if we've COWed this reloc root we will not find that bytenr,
and we will trip over the ASSERT(root).

Fix this by using the commit_root->start bytenr for indexing the commit
root.  Then we change the __update_reloc_root() caller to be used when
we switch the commit root for the reloc root during commit.

This fixes the panic I was seeing when we started throttling relocation
for delayed refs.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: restart relocate_tree_blocks properly

[ Upstream commit 50dbbb71c79df89532ec41d118d59386e5a877e3 ]

There are two bugs here, but fixing them independently would just result
in pain if you happened to bisect between the two patches.

First is how we handle the -EAGAIN from relocate_tree_block().  We don't
set error, unless we happen to be the first node, which makes no sense,
I have no idea what the code was trying to accomplish here.

We in fact _do_ want err set here so that we know we need to restart in
relocate_block_group().  Also we need finish_pending_nodes() to not
actually call link_to_upper(), because we didn't actually relocate the
block.

And then if we do get -EAGAIN we do not want to set our backref cache
last_trans to the one before ours.  This would force us to update our
backref cache if we didn't cross transaction ids, which would mean we'd
have some nodes updated to their new_bytenr, but still able to find
their old bytenr because we're searching the same commit root as the
last time we went through relocate_tree_blocks.

Fixing these two things keeps us from panicing when we start breaking
out of relocate_tree_blocks() either for delayed ref flushing or enospc.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: remove a BUG_ON() from merge_reloc_roots()

[ Upstream commit 7b7b74315b24dc064bc1c683659061c3d48f8668 ]

This was pretty subtle, we default to reloc roots having 0 root refs, so
if we crash in the middle of the relocation they can just be deleted.
If we successfully complete the relocation operations we'll set our root
refs to 1 in prepare_to_merge() and then go on to merge_reloc_roots().

At prepare_to_merge() time if any of the reloc roots have a 0 reference
still, we will remove that reloc root from our reloc root rb tree, and
then clean it up later.

However this only happens if we successfully start a transaction.  If
we've aborted previously we will skip this step completely, and only
have reloc roots with a reference count of 0, but were never properly
removed from the reloc control's rb tree.

This isn't a problem per-se, our references are held by the list the
reloc roots are on, and by the original root the reloc root belongs to.
If we end up in this situation all the reloc roots will be added to the
dirty_reloc_list, and then properly dropped at that point.  The reloc
control will be free'd and the rb tree is no longer used.

There were two options when fixing this, one was to remove the BUG_ON(),
the other was to make prepare_to_merge() handle the case where we
couldn't start a trans handle.

IMO this is the cleaner solution.  I started with handling the error in
prepare_to_merge(), but it turned out super ugly.  And in the end this
BUG_ON() simply doesn't matter, the cleanup was happening properly, we
were just panicing because this BUG_ON() only matters in the success
case.  So I've opted to just remove it and add a comment where it was.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: qgroup: ensure qgroup_rescan_running is only set when the worker is at least queued

[ Upstream commit d61acbbf54c612ea9bf67eed609494cda0857b3a ]

[BUG]
There are some reports about btrfs wait forever to unmount itself, with
the following call trace:

  INFO: task umount:4631 blocked for more than 491 seconds.
        Tainted: G               X  5.3.8-2-default #1
  "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  umount          D    0  4631   3337 0x00000000
  Call Trace:
  ([<00000000174adf7a>] __schedule+0x342/0x748)
   [<00000000174ae3ca>] schedule+0x4a/0xd8
   [<00000000174b1f08>] schedule_timeout+0x218/0x420
   [<00000000174af10c>] wait_for_common+0x104/0x1d8
   [<000003ff804d6994>] btrfs_qgroup_wait_for_completion+0x84/0xb0 [btrfs]
   [<000003ff8044a616>] close_ctree+0x4e/0x380 [btrfs]
   [<0000000016fa3136>] generic_shutdown_super+0x8e/0x158
   [<0000000016fa34d6>] kill_anon_super+0x26/0x40
   [<000003ff8041ba88>] btrfs_kill_super+0x28/0xc8 [btrfs]
   [<0000000016fa39f8>] deactivate_locked_super+0x68/0x98
   [<0000000016fcb198>] cleanup_mnt+0xc0/0x140
   [<0000000016d6a846>] task_work_run+0xc6/0x110
   [<0000000016d04f76>] do_notify_resume+0xae/0xb8
   [<00000000174b30ae>] system_call+0xe2/0x2c8

[CAUSE]
The problem happens when we have called qgroup_rescan_init(), but
not queued the worker. It can be caused mostly by error handling.

Qgroup ioctl thread | Unmount thread
----------------------------------------+-----------------------------------
|
btrfs_qgroup_rescan() |
|- qgroup_rescan_init() |
|  |- qgroup_rescan_running = true; |
| |
|- trans = btrfs_join_transaction() |
|  Some error happened |
| |
|- btrfs_qgroup_rescan() returns error |
   But qgroup_rescan_running == true; |
| close_ctree()
| |- btrfs_qgroup_wait_for_completion()
|    |- running == true;
|    |- wait_for_completion();

btrfs_qgroup_rescan_worker is never queued, thus no one is going to wake
up close_ctree() and we get a deadlock.

All involved qgroup_rescan_init() callers are:

- btrfs_qgroup_rescan()
  The example above. It's possible to trigger the deadlock when error
  happened.

- btrfs_quota_enable()
  Not possible. Just after qgroup_rescan_init() we queue the work.

- btrfs_read_qgroup_config()
  It's possible to trigger the deadlock. It only init the work, the
  work queueing happens in btrfs_qgroup_rescan_resume().
  Thus if error happened in between, deadlock is possible.

We shouldn't set fs_info->qgroup_rescan_running just in
qgroup_rescan_init(), as at that stage we haven't yet queued qgroup
rescan worker to run.

[FIX]
Set qgroup_rescan_running before queueing the work, so that we ensure
the rescan work is queued when we wait for it.

Fixes: 8d9eddad1946 ("Btrfs: fix qgroup rescan worker initialization")
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
[ Change subject and cause analyse, use a smaller fix ]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block, bfq: fix use-after-free in bfq_idle_slice_timer_body

[ Upstream commit 2f95fa5c955d0a9987ffdc3a095e2f4e62c5f2a9 ]

In bfq_idle_slice_timer func, bfqq = bfqd->in_service_queue is
not in bfqd-lock critical section. The bfqq, which is not
equal to NULL in bfq_idle_slice_timer, may be freed after passing
to bfq_idle_slice_timer_body. So we will access the freed memory.

In addition, considering the bfqq may be in race, we should
firstly check whether bfqq is in service before doing something
on it in bfq_idle_slice_timer_body func. If the bfqq in race is
not in service, it means the bfqq has been expired through
__bfq_bfqq_expire func, and wait_request flags has been cleared in
__bfq_bfqd_reset_in_service func. So we do not need to re-clear the
wait_request of bfqq which is not in service.

KASAN log is given as follows:
[13058.354613] ==================================================================
[13058.354640] BUG: KASAN: use-after-free in bfq_idle_slice_timer+0xac/0x290
[13058.354644] Read of size 8 at addr ffffa02cf3e63f78 by task fork13/19767
[13058.354646]
[13058.354655] CPU: 96 PID: 19767 Comm: fork13
[13058.354661] Call trace:
[13058.354667]  dump_backtrace+0x0/0x310
[13058.354672]  show_stack+0x28/0x38
[13058.354681]  dump_stack+0xd8/0x108
[13058.354687]  print_address_description+0x68/0x2d0
[13058.354690]  kasan_report+0x124/0x2e0
[13058.354697]  __asan_load8+0x88/0xb0
[13058.354702]  bfq_idle_slice_timer+0xac/0x290
[13058.354707]  __hrtimer_run_queues+0x298/0x8b8
[13058.354710]  hrtimer_interrupt+0x1b8/0x678
[13058.354716]  arch_timer_handler_phys+0x4c/0x78
[13058.354722]  handle_percpu_devid_irq+0xf0/0x558
[13058.354731]  generic_handle_irq+0x50/0x70
[13058.354735]  __handle_domain_irq+0x94/0x110
[13058.354739]  gic_handle_irq+0x8c/0x1b0
[13058.354742]  el1_irq+0xb8/0x140
[13058.354748]  do_wp_page+0x260/0xe28
[13058.354752]  __handle_mm_fault+0x8ec/0x9b0
[13058.354756]  handle_mm_fault+0x280/0x460
[13058.354762]  do_page_fault+0x3ec/0x890
[13058.354765]  do_mem_abort+0xc0/0x1b0
[13058.354768]  el0_da+0x24/0x28
[13058.354770]
[13058.354773] Allocated by task 19731:
[13058.354780]  kasan_kmalloc+0xe0/0x190
[13058.354784]  kasan_slab_alloc+0x14/0x20
[13058.354788]  kmem_cache_alloc_node+0x130/0x440
[13058.354793]  bfq_get_queue+0x138/0x858
[13058.354797]  bfq_get_bfqq_handle_split+0xd4/0x328
[13058.354801]  bfq_init_rq+0x1f4/0x1180
[13058.354806]  bfq_insert_requests+0x264/0x1c98
[13058.354811]  blk_mq_sched_insert_requests+0x1c4/0x488
[13058.354818]  blk_mq_flush_plug_list+0x2d4/0x6e0
[13058.354826]  blk_flush_plug_list+0x230/0x548
[13058.354830]  blk_finish_plug+0x60/0x80
[13058.354838]  read_pages+0xec/0x2c0
[13058.354842]  __do_page_cache_readahead+0x374/0x438
[13058.354846]  ondemand_readahead+0x24c/0x6b0
[13058.354851]  page_cache_sync_readahead+0x17c/0x2f8
[13058.354858]  generic_file_buffered_read+0x588/0xc58
[13058.354862]  generic_file_read_iter+0x1b4/0x278
[13058.354965]  ext4_file_read_iter+0xa8/0x1d8 [ext4]
[13058.354972]  __vfs_read+0x238/0x320
[13058.354976]  vfs_read+0xbc/0x1c0
[13058.354980]  ksys_read+0xdc/0x1b8
[13058.354984]  __arm64_sys_read+0x50/0x60
[13058.354990]  el0_svc_common+0xb4/0x1d8
[13058.354994]  el0_svc_handler+0x50/0xa8
[13058.354998]  el0_svc+0x8/0xc
[13058.354999]
[13058.355001] Freed by task 19731:
[13058.355007]  __kasan_slab_free+0x120/0x228
[13058.355010]  kasan_slab_free+0x10/0x18
[13058.355014]  kmem_cache_free+0x288/0x3f0
[13058.355018]  bfq_put_queue+0x134/0x208
[13058.355022]  bfq_exit_icq_bfqq+0x164/0x348
[13058.355026]  bfq_exit_icq+0x28/0x40
[13058.355030]  ioc_exit_icq+0xa0/0x150
[13058.355035]  put_io_context_active+0x250/0x438
[13058.355038]  exit_io_context+0xd0/0x138
[13058.355045]  do_exit+0x734/0xc58
[13058.355050]  do_group_exit+0x78/0x220
[13058.355054]  __wake_up_parent+0x0/0x50
[13058.355058]  el0_svc_common+0xb4/0x1d8
[13058.355062]  el0_svc_handler+0x50/0xa8
[13058.355066]  el0_svc+0x8/0xc
[13058.355067]
[13058.355071] The buggy address belongs to the object at ffffa02cf3e63e70#012 which belongs to the cache bfq_queue of size 464
[13058.355075] The buggy address is located 264 bytes inside of#012 464-byte region [ffffa02cf3e63e70, ffffa02cf3e64040)
[13058.355077] The buggy address belongs to the page:
[13058.355083] page:ffff7e80b3cf9800 count:1 mapcount:0 mapping:ffff802db5c90780 index:0xffffa02cf3e606f0 compound_mapcount: 0
[13058.366175] flags: 0x2ffffe0000008100(slab|head)
[13058.370781] raw: 2ffffe0000008100 ffff7e80b53b1408 ffffa02d730c1c90 ffff802db5c90780
[13058.370787] raw: ffffa02cf3e606f0 0000000000370023 00000001ffffffff 0000000000000000
[13058.370789] page dumped because: kasan: bad access detected
[13058.370791]
[13058.370792] Memory state around the buggy address:
[13058.370797]  ffffa02cf3e63e00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fb fb
[13058.370801]  ffffa02cf3e63e80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[13058.370805] >ffffa02cf3e63f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[13058.370808]                                                                 ^
[13058.370811]  ffffa02cf3e63f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[13058.370815]  ffffa02cf3e64000: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[13058.370817] ==================================================================
[13058.370820] Disabling lock debugging due to kernel taint

Here, we directly pass the bfqd to bfq_idle_slice_timer_body func.
--
V2->V3: rewrite the comment as suggested by Paolo Valente
V1->V2: add one comment, and add Fixes and Reported-by tag.

Fixes: aee69d78d ("block, bfq: introduce the BFQ-v0 I/O scheduler as an extra scheduler")
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Reported-by: Wang Wang <wangwang2@huawei.com>
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Signed-off-by: Feilong Lin <linfeilong@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

locking/lockdep: Avoid recursion in lockdep_count_{for,back}ward_deps()

[ Upstream commit 25016bd7f4caf5fc983bbab7403d08e64cba3004 ]

Qian Cai reported a bug when PROVE_RCU_LIST=y, and read on /proc/lockdep
triggered a warning:

  [ ] DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled)
  ...
  [ ] Call Trace:
  [ ]  lock_is_held_type+0x5d/0x150
  [ ]  ? rcu_lockdep_current_cpu_online+0x64/0x80
  [ ]  rcu_read_lock_any_held+0xac/0x100
  [ ]  ? rcu_read_lock_held+0xc0/0xc0
  [ ]  ? __slab_free+0x421/0x540
  [ ]  ? kasan_kmalloc+0x9/0x10
  [ ]  ? __kmalloc_node+0x1d7/0x320
  [ ]  ? kvmalloc_node+0x6f/0x80
  [ ]  __bfs+0x28a/0x3c0
  [ ]  ? class_equal+0x30/0x30
  [ ]  lockdep_count_forward_deps+0x11a/0x1a0

The warning got triggered because lockdep_count_forward_deps() call
__bfs() without current->lockdep_recursion being set, as a result
a lockdep internal function (__bfs()) is checked by lockdep, which is
unexpected, and the inconsistency between the irq-off state and the
state traced by lockdep caused the warning.

Apart from this warning, lockdep internal functions like __bfs() should
always be protected by current->lockdep_recursion to avoid potential
deadlocks and data inconsistency, therefore add the
current->lockdep_recursion on-and-off section to protect __bfs() in both
lockdep_count_forward_deps() and lockdep_count_backward_deps()

Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200312151258.128036-1-boqun.feng@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: spi-fsl-dspi: Replace interruptible wait queue with a simple completion

[ Upstream commit 4f5ee75ea1718a09149460b3df993f389a67b56a ]

Currently the driver puts the process in interruptible sleep waiting for
the interrupt train to finish transfer to/from the tx_buf and rx_buf.

But exiting the process with ctrl-c may make the kernel panic: the
wait_event_interruptible call will return -ERESTARTSYS, which a proper
driver implementation is perhaps supposed to handle, but nonetheless
this one doesn't, and aborts the transfer altogether.

Actually when the task is interrupted, there is still a high chance that
the dspi_interrupt is still triggering. And if dspi_transfer_one_message
returns execution all the way to the spi_device driver, that can free
the spi_message and spi_transfer structures, leaving the interrupts to
access a freed tx_buf and rx_buf.

hexdump -C /dev/mtd0
00000000  00 75 68 75 0a ff ff ff  ff ff ff ff ff ff ff ff
|.uhu............|
00000010  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff
|................|
*
^C[   38.495955] fsl-dspi 2120000.spi: Waiting for transfer to complete failed!
[   38.503097] spi_master spi2: failed to transfer one message from queue
[   38.509729] Unable to handle kernel paging request at virtual address ffff800095ab3377
[   38.517676] Mem abort info:
[   38.520474]   ESR = 0x96000045
[   38.523533]   EC = 0x25: DABT (current EL), IL = 32 bits
[   38.528861]   SET = 0, FnV = 0
[   38.531921]   EA = 0, S1PTW = 0
[   38.535067] Data abort info:
[   38.537952]   ISV = 0, ISS = 0x00000045
[   38.541797]   CM = 0, WnR = 1
[   38.544771] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000082621000
[   38.551494] [ffff800095ab3377] pgd=00000020fffff003, p4d=00000020fffff003, pud=0000000000000000
[   38.560229] Internal error: Oops: 96000045 [#1] PREEMPT SMP
[   38.565819] Modules linked in:
[   38.568882] CPU: 0 PID: 2729 Comm: hexdump Not tainted 5.6.0-rc4-next-20200306-00052-gd8730cdc8a0b-dirty #193
[   38.578834] Hardware name: Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier (DT)
[   38.587129] pstate: 20000085 (nzCv daIf -PAN -UAO)
[   38.591941] pc : ktime_get_real_ts64+0x3c/0x110
[   38.596487] lr : spi_take_timestamp_pre+0x40/0x90
[   38.601203] sp : ffff800010003d90
[   38.604525] x29: ffff800010003d90 x28: ffff80001200e000
[   38.609854] x27: ffff800011da9000 x26: ffff002079c40400
[   38.615184] x25: ffff8000117fe018 x24: ffff800011daa1a0
[   38.620513] x23: ffff800015ab3860 x22: ffff800095ab3377
[   38.625841] x21: 000000000000146e x20: ffff8000120c3000
[   38.631170] x19: ffff0020795f6e80 x18: ffff800011da9948
[   38.636498] x17: 0000000000000000 x16: 0000000000000000
[   38.641826] x15: ffff800095ab3377 x14: 0720072007200720
[   38.647155] x13: 0720072007200765 x12: 0775076507750771
[   38.652483] x11: 0720076d076f0772 x10: 0000000000000040
[   38.657812] x9 : ffff8000108e2100 x8 : ffff800011dcabe8
[   38.663139] x7 : 0000000000000000 x6 : ffff800015ab3a60
[   38.668468] x5 : 0000000007200720 x4 : ffff800095ab3377
[   38.673796] x3 : 0000000000000000 x2 : 0000000000000ab0
[   38.679125] x1 : ffff800011daa000 x0 : 0000000000000026
[   38.684454] Call trace:
[   38.686905]  ktime_get_real_ts64+0x3c/0x110
[   38.691100]  spi_take_timestamp_pre+0x40/0x90
[   38.695470]  dspi_fifo_write+0x58/0x2c0
[   38.699315]  dspi_interrupt+0xbc/0xd0
[   38.702987]  __handle_irq_event_percpu+0x78/0x2c0
[   38.707706]  handle_irq_event_percpu+0x3c/0x90
[   38.712161]  handle_irq_event+0x4c/0xd0
[   38.716008]  handle_fasteoi_irq+0xbc/0x170
[   38.720115]  generic_handle_irq+0x2c/0x40
[   38.724135]  __handle_domain_irq+0x68/0xc0
[   38.728243]  gic_handle_irq+0xc8/0x160
[   38.732000]  el1_irq+0xb8/0x180
[   38.735149]  spi_nor_spimem_read_data+0xe0/0x140
[   38.739779]  spi_nor_read+0xc4/0x120
[   38.743364]  mtd_read_oob+0xa8/0xc0
[   38.746860]  mtd_read+0x4c/0x80
[   38.750007]  mtdchar_read+0x108/0x2a0
[   38.753679]  __vfs_read+0x20/0x50
[   38.757002]  vfs_read+0xa4/0x190
[   38.760237]  ksys_read+0x6c/0xf0
[   38.763471]  __arm64_sys_read+0x20/0x30
[   38.767319]  el0_svc_common.constprop.3+0x90/0x160
[   38.772125]  do_el0_svc+0x28/0x90
[   38.775449]  el0_sync_handler+0x118/0x190
[   38.779468]  el0_sync+0x140/0x180
[   38.782793] Code: 91000294 1400000f d50339bf f9405e80 (f90002c0)
[   38.788910] ---[ end trace 55da560db4d6bef7 ]---
[   38.793540] Kernel panic - not syncing: Fatal exception in interrupt
[   38.799914] SMP: stopping secondary CPUs
[   38.803849] Kernel Offset: disabled
[   38.807344] CPU features: 0x10002,20006008
[   38.811451] Memory Limit: none
[   38.814513] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

So it is clear that the "interruptible" part isn't handled correctly.
When the process receives a signal, one could either attempt a clean
abort (which appears to be difficult with this hardware) or just keep
restarting the sleep until the wait queue really completes. But checking
in a loop for -ERESTARTSYS is a bit too complicated for this driver, so
just make the sleep uninterruptible, to avoid all that nonsense.

The wait queue was actually restructured as a completion, after polling
other drivers for the most "popular" approach.

Fixes: 349ad66c0ab0 ("spi:Add Freescale DSPI driver for Vybrid VF610 platform")
Reported-by: Michael Walle <michael@walle.cc>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20200318001603.9650-7-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: fix a double abort case with fw_load_sysfs_fallback

[ Upstream commit bcfbd3523f3c6eea51a74d217a8ebc5463bcb7f4 ]

fw_sysfs_wait_timeout may return err with -ENOENT
at fw_load_sysfs_fallback and firmware is already
in abort status, no need to abort again, so skip it.

This issue is caused by concurrent situation like below:
when thread 1# wait firmware loading, thread 2# may write
-1 to abort loading and wakeup thread 1# before it timeout.
so wait_for_completion_killable_timeout of thread 1# would
return remaining time which is != 0 with fw_st->status
FW_STATUS_ABORTED.And the results would be converted into
err -ENOENT in __fw_state_wait_common and transfered to
fw_load_sysfs_fallback in thread 1#.
The -ENOENT means firmware status is already at ABORTED,
so fw_load_sysfs_fallback no need to get mutex to abort again.
-----------------------------
thread 1#,wait for loading
fw_load_sysfs_fallback
->fw_sysfs_wait_timeout
    ->__fw_state_wait_common
       ->wait_for_completion_killable_timeout

in __fw_state_wait_common,
...
93    ret = wait_for_completion_killable_timeout(&fw_st->completion, timeout);
94    if (ret != 0 && fw_st->status == FW_STATUS_ABORTED)
95       return -ENOENT;
96    if (!ret)
97 return -ETIMEDOUT;
98
99    return ret < 0 ? ret : 0;
-----------------------------
thread 2#, write -1 to abort loading
firmware_loading_store
->fw_load_abort
   ->__fw_load_abort
     ->fw_state_aborted
       ->__fw_state_set
         ->complete_all

in __fw_state_set,
...
111    if (status == FW_STATUS_DONE || status == FW_STATUS_ABORTED)
112       complete_all(&fw_st->completion);
-------------------------------------------
BTW,the double abort issue would not cause kernel panic or create an issue,
but slow down it sometimes.The change is just a minor optimization.

Signed-off-by: Junyong Sun <sunjunyong@xiaomi.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/1583202968-28792-1-git-send-email-sunjunyong@xiaomi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md: check arrays is suspended in mddev_detach before call quiesce operations

[ Upstream commit 6b40bec3b13278d21fa6c1ae7a0bdf2e550eed5f ]

Don't call quiesce(1) and quiesce(0) if array is already suspended,
otherwise in level_store, the array is writable after mddev_detach
in below part though the intention is to make array writable after
resume.

mddev_suspend(mddev);
mddev_detach(mddev);
...
mddev_resume(mddev);

And it also causes calltrace as follows in [1].

[48005.653834] WARNING: CPU: 1 PID: 45380 at kernel/kthread.c:510 kthread_park+0x77/0x90
[...]
[48005.653976] CPU: 1 PID: 45380 Comm: mdadm Tainted: G           OE     5.4.10-arch1-1 #1
[48005.653979] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./J4105-ITX, BIOS P1.40 08/06/2018
[48005.653984] RIP: 0010:kthread_park+0x77/0x90
[48005.654015] Call Trace:
[48005.654039]  r5l_quiesce+0x3c/0x70 [raid456]
[48005.654052]  raid5_quiesce+0x228/0x2e0 [raid456]
[48005.654073]  mddev_detach+0x30/0x70 [md_mod]
[48005.654090]  level_store+0x202/0x670 [md_mod]
[48005.654099]  ? security_capable+0x40/0x60
[48005.654114]  md_attr_store+0x7b/0xc0 [md_mod]
[48005.654123]  kernfs_fop_write+0xce/0x1b0
[48005.654132]  vfs_write+0xb6/0x1a0
[48005.654138]  ksys_write+0x67/0xe0
[48005.654146]  do_syscall_64+0x4e/0x140
[48005.654155]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[48005.654161] RIP: 0033:0x7fa0c8737497

[1]: https://bugzilla.kernel.org/show_bug.cgi?id=206161

Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/gic-v4: Provide irq_retrigger to avoid circular locking dependency

[ Upstream commit 7809f7011c3bce650e502a98afeb05961470d865 ]

On a very heavily loaded D05 with GICv4, I managed to trigger the
following lockdep splat:

[ 6022.598864] ======================================================
[ 6022.605031] WARNING: possible circular locking dependency detected
[ 6022.611200] 5.6.0-rc4-00026-geee7c7b0f498 #680 Tainted: G            E
[ 6022.618061] ------------------------------------------------------
[ 6022.624227] qemu-system-aar/7569 is trying to acquire lock:
[ 6022.629789] ffff042f97606808 (&p->pi_lock){-.-.}, at: try_to_wake_up+0x54/0x7a0
[ 6022.637102]
[ 6022.637102] but task is already holding lock:
[ 6022.642921] ffff002fae424cf0 (&irq_desc_lock_class){-.-.}, at: __irq_get_desc_lock+0x5c/0x98
[ 6022.651350]
[ 6022.651350] which lock already depends on the new lock.
[ 6022.651350]
[ 6022.659512]
[ 6022.659512] the existing dependency chain (in reverse order) is:
[ 6022.666980]
[ 6022.666980] -> #2 (&irq_desc_lock_class){-.-.}:
[ 6022.672983]        _raw_spin_lock_irqsave+0x50/0x78
[ 6022.677848]        __irq_get_desc_lock+0x5c/0x98
[ 6022.682453]        irq_set_vcpu_affinity+0x40/0xc0
[ 6022.687236]        its_make_vpe_non_resident+0x6c/0xb8
[ 6022.692364]        vgic_v4_put+0x54/0x70
[ 6022.696273]        vgic_v3_put+0x20/0xd8
[ 6022.700183]        kvm_vgic_put+0x30/0x48
[ 6022.704182]        kvm_arch_vcpu_put+0x34/0x50
[ 6022.708614]        kvm_sched_out+0x34/0x50
[ 6022.712700]        __schedule+0x4bc/0x7f8
[ 6022.716697]        schedule+0x50/0xd8
[ 6022.720347]        kvm_arch_vcpu_ioctl_run+0x5f0/0x978
[ 6022.725473]        kvm_vcpu_ioctl+0x3d4/0x8f8
[ 6022.729820]        ksys_ioctl+0x90/0xd0
[ 6022.733642]        __arm64_sys_ioctl+0x24/0x30
[ 6022.738074]        el0_svc_common.constprop.3+0xa8/0x1e8
[ 6022.743373]        do_el0_svc+0x28/0x88
[ 6022.747198]        el0_svc+0x14/0x40
[ 6022.750761]        el0_sync_handler+0x124/0x2b8
[ 6022.755278]        el0_sync+0x140/0x180
[ 6022.759100]
[ 6022.759100] -> #1 (&rq->lock){-.-.}:
[ 6022.764143]        _raw_spin_lock+0x38/0x50
[ 6022.768314]        task_fork_fair+0x40/0x128
[ 6022.772572]        sched_fork+0xe0/0x210
[ 6022.776484]        copy_process+0x8c4/0x18d8
[ 6022.780742]        _do_fork+0x88/0x6d8
[ 6022.784478]        kernel_thread+0x64/0x88
[ 6022.788563]        rest_init+0x30/0x270
[ 6022.792390]        arch_call_rest_init+0x14/0x1c
[ 6022.796995]        start_kernel+0x498/0x4c4
[ 6022.801164]
[ 6022.801164] -> #0 (&p->pi_lock){-.-.}:
[ 6022.806382]        __lock_acquire+0xdd8/0x15c8
[ 6022.810813]        lock_acquire+0xd0/0x218
[ 6022.814896]        _raw_spin_lock_irqsave+0x50/0x78
[ 6022.819761]        try_to_wake_up+0x54/0x7a0
[ 6022.824018]        wake_up_process+0x1c/0x28
[ 6022.828276]        wakeup_softirqd+0x38/0x40
[ 6022.832533]        __tasklet_schedule_common+0xc4/0xf0
[ 6022.837658]        __tasklet_schedule+0x24/0x30
[ 6022.842176]        check_irq_resend+0xc8/0x158
[ 6022.846609]        irq_startup+0x74/0x128
[ 6022.850606]        __enable_irq+0x6c/0x78
[ 6022.854602]        enable_irq+0x54/0xa0
[ 6022.858431]        its_make_vpe_non_resident+0xa4/0xb8
[ 6022.863557]        vgic_v4_put+0x54/0x70
[ 6022.867469]        kvm_arch_vcpu_blocking+0x28/0x38
[ 6022.872336]        kvm_vcpu_block+0x48/0x490
[ 6022.876594]        kvm_handle_wfx+0x18c/0x310
[ 6022.880938]        handle_exit+0x138/0x198
[ 6022.885022]        kvm_arch_vcpu_ioctl_run+0x4d4/0x978
[ 6022.890148]        kvm_vcpu_ioctl+0x3d4/0x8f8
[ 6022.894494]        ksys_ioctl+0x90/0xd0
[ 6022.898317]        __arm64_sys_ioctl+0x24/0x30
[ 6022.902748]        el0_svc_common.constprop.3+0xa8/0x1e8
[ 6022.908046]        do_el0_svc+0x28/0x88
[ 6022.911871]        el0_svc+0x14/0x40
[ 6022.915434]        el0_sync_handler+0x124/0x2b8
[ 6022.919951]        el0_sync+0x140/0x180
[ 6022.923773]
[ 6022.923773] other info that might help us debug this:
[ 6022.923773]
[ 6022.931762] Chain exists of:
[ 6022.931762]   &p->pi_lock --> &rq->lock --> &irq_desc_lock_class
[ 6022.931762]
[ 6022.942101]  Possible unsafe locking scenario:
[ 6022.942101]
[ 6022.948007]        CPU0                    CPU1
[ 6022.952523]        ----                    ----
[ 6022.957039]   lock(&irq_desc_lock_class);
[ 6022.961036]                                lock(&rq->lock);
[ 6022.966595]                                lock(&irq_desc_lock_class);
[ 6022.973109]   lock(&p->pi_lock);
[ 6022.976324]
[ 6022.976324]  *** DEADLOCK ***

This is happening because we have a pending doorbell that requires
retrigger. As SW retriggering is done in a tasklet, we trigger the
circular dependency above.

The easy cop-out is to provide a retrigger callback that doesn't
require acquiring any extra lock.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200310184921.23552-5-maz@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc3: core: add support for disabling SS instances in park mode

[ Upstream commit 7ba6b09fda5e0cb741ee56f3264665e0edc64822 ]

In certain circumstances, the XHCI SuperSpeed instance in park mode
can fail to recover, thus on Amlogic G12A/G12B/SM1 SoCs when there is high
load on the single XHCI SuperSpeed instance, the controller can crash like:
xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
xhci-hcd xhci-hcd.0.auto: Host halt failed, -110
xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead
xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
hub 2-1.1:1.0: hub_ext_port_status failed (err = -22)
xhci-hcd xhci-hcd.0.auto: HC died; cleaning up
usb 2-1.1-port1: cannot reset (err = -22)

Setting the PARKMODE_DISABLE_SS bit in the DWC3_USB3_GUCTL1 mitigates
the issue. The bit is described as :
"When this bit is set to '1' all SS bus instances in park mode are disabled"

Synopsys explains:
The GUCTL1.PARKMODE_DISABLE_SS is only available in
dwc_usb3 controller running in host mode.
This should not be set for other IPs.
This can be disabled by default based on IP, but I recommend to have a
property to enable this feature for devices that need this.

CC: Dongjin Kim <tobetter@gmail.com>
Cc: Jianxin Pan <jianxin.pan@amlogic.com>
Cc: Thinh Nguyen <thinhn@synopsys.com>
Cc: Jun Li <lijun.kernel@gmail.com>
Reported-by: Tim <elatllat@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: i2c: ov5695: Fix power on and off sequences

[ Upstream commit f1a64f56663e9d03e509439016dcbddd0166b2da ]

From the measured hardware signal, OV5695 reset pin goes high for a
short period of time during boot-up. From the sensor specification, the
reset pin is active low and the DT binding defines the pin as active
low, which means that the values set by the driver are inverted and thus
the value requested in probe ends up high.

Fix it by changing probe to request the reset GPIO initialized to high,
which makes the initial state of the physical signal low.

In addition, DOVDD rising must occur before DVDD rising from spec., but
regulator_bulk_enable() API enables all the regulators asynchronously.
Use an explicit loops of regulator_enable() instead.

For power off sequence, it is required that DVDD falls first. Given the
bulk API does not give any guarantee about the order of regulators,
change the driver to use regulator_disable() instead.

The sensor also requires a delay between reset high and first I2C
transaction, which was assumed to be 8192 XVCLK cycles, but 1ms is
recommended by the vendor. Fix this as well.

Signed-off-by: Dongchun Zhu <dongchun.zhu@mediatek.com>
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: Fix use-after-free issue accessing struct io_cq

[ Upstream commit 30a2da7b7e225ef6c87a660419ea04d3cef3f6a7 ]

There is a potential race between ioc_release_fn() and
ioc_clear_queue() as shown below, due to which below kernel
crash is observed. It also can result into use-after-free
issue.

context#1: context#2:
ioc_release_fn() __ioc_clear_queue() gets the same icq
->spin_lock(&ioc->lock); ->spin_lock(&ioc->lock);
->ioc_destroy_icq(icq);
  ->list_del_init(&icq->q_node);
  ->call_rcu(&icq->__rcu_head,
   icq_free_icq_rcu);
->spin_unlock(&ioc->lock);
->ioc_destroy_icq(icq);
  ->hlist_del_init(&icq->ioc_node);
  This results into below crash as this memory
  is now used by icq->__rcu_head in context#1.
  There is a chance that icq could be free'd
  as well.

22150.386550:   <6> Unable to handle kernel write to read-only memory
at virtual address ffffffaa8d31ca50
...
Call trace:
22150.607350:   <2>  ioc_destroy_icq+0x44/0x110
22150.611202:   <2>  ioc_clear_queue+0xac/0x148
22150.615056:   <2>  blk_cleanup_queue+0x11c/0x1a0
22150.619174:   <2>  __scsi_remove_device+0xdc/0x128
22150.623465:   <2>  scsi_forget_host+0x2c/0x78
22150.627315:   <2>  scsi_remove_host+0x7c/0x2a0
22150.631257:   <2>  usb_stor_disconnect+0x74/0xc8
22150.635371:   <2>  usb_unbind_interface+0xc8/0x278
22150.639665:   <2>  device_release_driver_internal+0x198/0x250
22150.644897:   <2>  device_release_driver+0x24/0x30
22150.649176:   <2>  bus_remove_device+0xec/0x140
22150.653204:   <2>  device_del+0x270/0x460
22150.656712:   <2>  usb_disable_device+0x120/0x390
22150.660918:   <2>  usb_disconnect+0xf4/0x2e0
22150.664684:   <2>  hub_event+0xd70/0x17e8
22150.668197:   <2>  process_one_work+0x210/0x480
22150.672222:   <2>  worker_thread+0x32c/0x4c8

Fix this by adding a new ICQ_DESTROYED flag in ioc_destroy_icq() to
indicate this icq is once marked as destroyed. Also, ensure
__ioc_clear_queue() is accessing icq within rcu_read_lock/unlock so
that icq doesn't get free'd up while it is still using it.

Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Co-developed-by: Pradeep P V K <ppvk@codeaurora.org>
Signed-off-by: Pradeep P V K <ppvk@codeaurora.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

genirq/irqdomain: Check pointer in irq_domain_alloc_irqs_hierarchy()

[ Upstream commit 87f2d1c662fa1761359fdf558246f97e484d177a ]

irq_domain_alloc_irqs_hierarchy() has 3 call sites in the compilation unit
but only one of them checks for the pointer which is being dereferenced
inside the called function. Move the check into the function. This allows
for catching the error instead of the following crash:

Unable to handle kernel NULL pointer dereference at virtual address 00000000
PC is at 0x0
LR is at gpiochip_hierarchy_irq_domain_alloc+0x11f/0x140
...
[<c06c23ff>] (gpiochip_hierarchy_irq_domain_alloc)
[<c0462a89>] (__irq_domain_alloc_irqs)
[<c0462dad>] (irq_create_fwspec_mapping)
[<c06c2251>] (gpiochip_to_irq)
[<c06c1c9b>] (gpiod_to_irq)
[<bf973073>] (gpio_irqs_init [gpio_irqs])
[<bf974048>] (gpio_irqs_exit+0xecc/0xe84 [gpio_irqs])
Code: bad PC value

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200306174720.82604-1-alexander.sverdlin@nokia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

efi/x86: Ignore the memory attributes table on i386

[ Upstream commit dd09fad9d2caad2325a39b766ce9e79cfc690184 ]

Commit:

  3a6b6c6fb23667fa ("efi: Make EFI_MEMORY_ATTRIBUTES_TABLE initialization common across all architectures")

moved the call to efi_memattr_init() from ARM specific to the generic
EFI init code, in order to be able to apply the restricted permissions
described in that table on x86 as well.

We never enabled this feature fully on i386, and so mapping and
reserving this table is pointless. However, due to the early call to
memblock_reserve(), the memory bookkeeping gets confused to the point
where it produces the splat below when we try to map the memory later
on:

  ------------[ cut here ]------------
  ioremap on RAM at 0x3f251000 - 0x3fa1afff
  WARNING: CPU: 0 PID: 0 at arch/x86/mm/ioremap.c:166 __ioremap_caller ...
  Modules linked in:
  CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.20.0 #48
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
  EIP: __ioremap_caller.constprop.0+0x249/0x260
  Code: 90 0f b7 05 4e 38 40 de 09 45 e0 e9 09 ff ff ff 90 8d 45 ec c6 05 ...
  EAX: 00000029 EBX: 00000000 ECX: de59c228 EDX: 00000001
  ESI: 3f250fff EDI: 00000000 EBP: de3edf20 ESP: de3edee0
  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00200296
  CR0: 80050033 CR2: ffd17000 CR3: 1e58c000 CR4: 00040690
  Call Trace:
   ioremap_cache+0xd/0x10
   ? old_map_region+0x72/0x9d
   old_map_region+0x72/0x9d
   efi_map_region+0x8/0xa
   efi_enter_virtual_mode+0x260/0x43b
   start_kernel+0x329/0x3aa
   i386_start_kernel+0xa7/0xab
   startup_32_smp+0x164/0x168
  ---[ end trace e15ccf6b9f356833 ]---

Let's work around this by disregarding the memory attributes table
altogether on i386, which does not result in a loss of functionality
or protection, given that we never consumed the contents.

Fixes: 3a6b6c6fb23667fa ("efi: Make EFI_MEMORY_ATTRIBUTES_TABLE ... ")
Tested-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200304165917.5893-1-ardb@kernel.org
Link: https://lore.kernel.org/r/20200308080859.21568-21-ardb@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/boot: Use unsigned comparison for addresses

[ Upstream commit 81a34892c2c7c809f9c4e22c5ac936ae673fb9a2 ]

The load address is compared with LOAD_PHYSICAL_ADDR using a signed
comparison currently (using jge instruction).

When loading a 64-bit kernel using the new efi32_pe_entry() point added by:

97aa276579b2 ("efi/x86: Add true mixed mode entry point into .compat section")

using Qemu with -m 3072, the firmware actually loads us above 2Gb,
resulting in a very early crash.

Use the JAE instruction to perform a unsigned comparison instead, as physical
addresses should be considered unsigned.

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200301230436.2246909-6-nivedita@alum.mit.edu
Link: https://lore.kernel.org/r/20200308080859.21568-14-ardb@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: imx6q: fix error handling

[ Upstream commit 3646f50a3838c5949a89ecbdb868497cdc05b8fd ]

When speed checking failed, direclty jumping to put_node label
is not correct. Need jump to out_free_opp to avoid resources leak.

Fixes: 2733fb0d0699 ("cpufreq: imx6q: read OCOTP through nvmem for imx6ul/imx6ull")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gfs2: Don't demote a glock until its revokes are written

[ Upstream commit df5db5f9ee112e76b5202fbc331f990a0fc316d6 ]

Before this patch, run_queue would demote glocks based on whether
there are any more holders. But if the glock has pending revokes that
haven't been written to the media, giving up the glock might end in
file system corruption if the revokes never get written due to
io errors, node crashes and fences, etc. In that case, another node
will replay the metadata blocks associated with the glock, but
because the revoke was never written, it could replay that block
even though the glock had since been granted to another node who
might have made changes.

This patch changes the logic in run_queue so that it never demotes
a glock until its count of pending revokes reaches zero.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gfs2: Do log_flush in gfs2_ail_empty_gl even if ail list is empty

[ Upstream commit 9ff78289356af640941bbb0dd3f46af2063f0046 ]

Before this patch, if gfs2_ail_empty_gl saw there was nothing on
the ail list, it would return and not flush the log. The problem
is that there could still be a revoke for the rgrp sitting on the
sd_log_le_revoke list that's been recently taken off the ail list.
But that revoke still needs to be written, and the rgrp_go_inval
still needs to call log_flush_wait to ensure the revokes are all
properly written to the journal before we relinquish control of
the glock to another node. If we give the glock to another node
before we have this knowledge, the node might crash and its journal
replayed, in which case the missing revoke would allow the journal
replay to replay the rgrp over top of the rgrp we already gave to
another node, thus overwriting its changes and corrupting the
file system.

This patch makes gfs2_ail_empty_gl still call gfs2_log_flush rather
than returning.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pstore/platform: fix potential mem leak if pstore_init_fs failed

[ Upstream commit 8a57d6d4ddfa41c49014e20493152c41a38fcbf8 ]

There is a potential mem leak when pstore_init_fs failed,
since the pstore compression maybe unlikey to initialized
successfully. We must clean up the allocation once this
unlikey issue happens.

Signed-off-by: chenqiwu <chenqiwu@xiaomi.com>
Link: https://lore.kernel.org/r/1581068800-13817-1-git-send-email-qiwuchen55@gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libata: Remove extra scsi_host_put() in ata_scsi_add_hosts()

[ Upstream commit 1d72f7aec3595249dbb83291ccac041a2d676c57 ]

If the call to scsi_add_host_with_dma() in ata_scsi_add_hosts() fails,
then we may get use-after-free KASAN warns:

==================================================================
BUG: KASAN: use-after-free in kobject_put+0x24/0x180
Read of size 1 at addr ffff0026b8c80364 by task swapper/0/1
CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 5.6.0-rc3-00004-g5a71b206ea82-dirty #1765
Hardware name: Huawei TaiShan 200 (Model 2280)/BC82AMDD, BIOS 2280-V2 CS V3.B160.01 02/24/2020
Call trace:
dump_backtrace+0x0/0x298
show_stack+0x14/0x20
dump_stack+0x118/0x190
print_address_description.isra.9+0x6c/0x3b8
__kasan_report+0x134/0x23c
kasan_report+0xc/0x18
__asan_load1+0x5c/0x68
kobject_put+0x24/0x180
put_device+0x10/0x20
scsi_host_put+0x10/0x18
ata_devres_release+0x74/0xb0
release_nodes+0x2d0/0x470
devres_release_all+0x50/0x78
really_probe+0x2d4/0x560
driver_probe_device+0x7c/0x148
device_driver_attach+0x94/0xa0
__driver_attach+0xa8/0x110
bus_for_each_dev+0xe8/0x158
driver_attach+0x30/0x40
bus_add_driver+0x220/0x2e0
driver_register+0xbc/0x1d0
__pci_register_driver+0xbc/0xd0
ahci_pci_driver_init+0x20/0x28
do_one_initcall+0xf0/0x608
kernel_init_freeable+0x31c/0x384
kernel_init+0x10/0x118
ret_from_fork+0x10/0x18

Allocated by task 5:
save_stack+0x28/0xc8
__kasan_kmalloc.isra.8+0xbc/0xd8
kasan_kmalloc+0xc/0x18
__kmalloc+0x1a8/0x280
scsi_host_alloc+0x44/0x678
ata_scsi_add_hosts+0x74/0x268
ata_host_register+0x228/0x488
ahci_host_activate+0x1c4/0x2a8
ahci_init_one+0xd18/0x1298
local_pci_probe+0x74/0xf0
work_for_cpu_fn+0x2c/0x48
process_one_work+0x488/0xc08
worker_thread+0x330/0x5d0
kthread+0x1c8/0x1d0
ret_from_fork+0x10/0x18

Freed by task 5:
save_stack+0x28/0xc8
__kasan_slab_free+0x118/0x180
kasan_slab_free+0x10/0x18
slab_free_freelist_hook+0xa4/0x1a0
kfree+0xd4/0x3a0
scsi_host_dev_release+0x100/0x148
device_release+0x7c/0xe0
kobject_put+0xb0/0x180
put_device+0x10/0x20
scsi_host_put+0x10/0x18
ata_scsi_add_hosts+0x210/0x268
ata_host_register+0x228/0x488
ahci_host_activate+0x1c4/0x2a8
ahci_init_one+0xd18/0x1298
local_pci_probe+0x74/0xf0
work_for_cpu_fn+0x2c/0x48
process_one_work+0x488/0xc08
worker_thread+0x330/0x5d0
kthread+0x1c8/0x1d0
ret_from_fork+0x10/0x18

There is also refcount issue, as well:
WARNING: CPU: 1 PID: 1 at lib/refcount.c:28 refcount_warn_saturate+0xf8/0x170

The issue is that we make an erroneous extra call to scsi_host_put()
for that host:

So in ahci_init_one()->ata_host_alloc_pinfo()->ata_host_alloc(), we setup
a device release method - ata_devres_release() - which intends to release
the SCSI hosts:

static void ata_devres_release(struct device *gendev, void *res)
{
...
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];

if (!ap)
continue;

if (ap->scsi_host)
scsi_host_put(ap->scsi_host);

}
...
}

However in the ata_scsi_add_hosts() error path, we also call
scsi_host_put() for the SCSI hosts.

Fix by removing the the scsi_host_put() calls in ata_scsi_add_hosts() and
leave this to ata_devres_release().

Fixes: f31871951b38 ("libata: separate out ata_host_alloc() and ata_host_register()")
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: i2c: video-i2c: fix build errors due to 'imply hwmon'

[ Upstream commit 64d4fc9926f09861a35d8f0f7d81f056e6d5af7b ]

Fix build fault when CONFIG_HWMON is a module, and CONFIG_VIDEO_I2C
as builtin. This is due to 'imply hwmon' in the respective Kconfig.

Issue build log:

ld: drivers/media/i2c/video-i2c.o: in function `amg88xx_hwmon_init':
video-i2c.c:(.text+0x2e1): undefined reference to `devm_hwmon_device_register_with_info

Cc: rdunlap@infradead.org
Fixes: acbea6798955 (media: video-i2c: add hwmon support for amg88xx)
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block, bfq: move forward the getting of an extra ref in bfq_bfqq_move

[ Upstream commit fd1bb3ae54a9a2e0c42709de861c69aa146b8955 ]

Commit ecedd3d7e199 ("block, bfq: get extra ref to prevent a queue
from being freed during a group move") gets an extra reference to a
bfq_queue before possibly deactivating it (temporarily), in
bfq_bfqq_move(). This prevents the bfq_queue from disappearing before
being reactivated in its new group.

Yet, the bfq_queue may also be expired (i.e., its service may be
stopped) before the bfq_queue is deactivated. And also an expiration
may lead to a premature freeing. This commit fixes this issue by
simply moving forward the getting of the extra reference already
introduced by commit ecedd3d7e199 ("block, bfq: get extra ref to
prevent a queue from being freed during a group move").

Reported-by: cki-project@redhat.com
Tested-by: cki-project@redhat.com
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI/switchtec: Fix init_completion race condition with poll_wait()

[ Upstream commit efbdc769601f4d50018bf7ca50fc9f7c67392ece ]

The call to init_completion() in mrpc_queue_cmd() can theoretically
race with the call to poll_wait() in switchtec_dev_poll().

  poll() write()
    switchtec_dev_poll()      switchtec_dev_write()
      poll_wait(&s->comp.wait);      mrpc_queue_cmd()
               init_completion(&s->comp)
         init_waitqueue_head(&s->comp.wait)

To my knowledge, no one has hit this bug.

Fix this by using reinit_completion() instead of init_completion() in
mrpc_queue_cmd().

Fixes: 080b47def5e5 ("MicroSemi Switchtec management interface driver")

Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lkml.kernel.org/r/20200313183608.2646-1-logang@deltatee.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/x86/ptrace_syscall_32: Fix no-vDSO segfault

[ Upstream commit 630b99ab60aa972052a4202a1ff96c7e45eb0054 ]

If AT_SYSINFO is not present, don't try to call a NULL pointer.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/faaf688265a7e1a5b944d6f8bc0f6368158306d3.1584052409.git.luto@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched: Avoid scale real weight down to zero

[ Upstream commit 26cf52229efc87e2effa9d788f9b33c40fb3358a ]

During our testing, we found a case that shares no longer
working correctly, the cgroup topology is like:

  /sys/fs/cgroup/cpu/A (shares=102400)
  /sys/fs/cgroup/cpu/A/B (shares=2)
  /sys/fs/cgroup/cpu/A/B/C (shares=1024)

  /sys/fs/cgroup/cpu/D (shares=1024)
  /sys/fs/cgroup/cpu/D/E (shares=1024)
  /sys/fs/cgroup/cpu/D/E/F (shares=1024)

The same benchmark is running in group C & F, no other tasks are
running, the benchmark is capable to consumed all the CPUs.

We suppose the group C will win more CPU resources since it could
enjoy all the shares of group A, but it's F who wins much more.

The reason is because we have group B with shares as 2, since
A->cfs_rq.load.weight == B->se.load.weight == B->shares/nr_cpus,
so A->cfs_rq.load.weight become very small.

And in calc_group_shares() we calculate shares as:

  load = max(scale_load_down(cfs_rq->load.weight), cfs_rq->avg.load_avg);
  shares = (tg_shares * load) / tg_weight;

Since the 'cfs_rq->load.weight' is too small, the load become 0
after scale down, although 'tg_shares' is 102400, shares of the se
which stand for group A on root cfs_rq become 2.

While the se of D on root cfs_rq is far more bigger than 2, so it
wins the battle.

Thus when scale_load_down() scale real weight down to 0, it's no
longer telling the real story, the caller will have the wrong
information and the calculation will be buggy.

This patch add check in scale_load_down(), so the real weight will
be >= MIN_SHARES after scale, after applied the group C wins as
expected.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/38e8e212-59a1-64b2-b247-b6d0b52d8dc1@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: allegro: fix type of gop_length in channel_create message

[ Upstream commit 8277815349327b8e65226eb58ddb680f90c2c0c0 ]

The gop_length field is actually only u16 and there are two more u8
fields in the message:

- the number of consecutive b-frames
- frequency of golden frames

Fix the message and thus fix the configuration of the GOP length.

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

time/sched_clock: Expire timer in hardirq context

[ Upstream commit 2c8bd58812ee3dbf0d78b566822f7eacd34bdd7b ]

To minimize latency, PREEMPT_RT kernels expires hrtimers in preemptible
softirq context by default. This can be overriden by marking the timer's
expiry with HRTIMER_MODE_HARD.

sched_clock_timer is missing this annotation: if its callback is preempted
and the duration of the preemption exceeds the wrap around time of the
underlying clocksource, sched clock will get out of sync.

Mark the sched_clock_timer for expiry in hard interrupt context.

Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200309181529.26558-1-a.darwish@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/versatile-fpga: Handle chained IRQs properly

[ Upstream commit 486562da598c59e9f835b551d7cf19507de2d681 ]

Enclose the chained handler with chained_irq_{enter,exit}(), so that the
muxed interrupts get properly acked.

This patch also fixes a reboot bug on OX820 SoC, where the jiffies timer
interrupt is never acked. The kernel waits a clock tick forever in
calibrate_delay_converge(), which leads to a boot hang.

Fixes: c41b16f8c9d9 ("ARM: integrator/versatile: consolidate FPGA IRQ handling code")
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200319023448.1479701-1-mans0n@gorani.run
Signed-off-by: Sasha Levin <sashal@kernel.org>

debugfs: Check module state before warning in {full/open}_proxy_open()

[ Upstream commit 275678e7a9be6a0ea9c1bb493e48abf2f4a01be5 ]

When the module is being removed, the module state is set to
MODULE_STATE_GOING. At this point, try_module_get() fails.
And when {full/open}_proxy_open() is being called,
it calls try_module_get() to try to hold module reference count.
If it fails, it warns about the possibility of debugfs file leak.

If {full/open}_proxy_open() is called while the module is being removed,
it fails to hold the module.
So, It warns about debugfs file leak. But it is not the debugfs file
leak case. So, this patch just adds module state checking routine
in the {full/open}_proxy_open().

Test commands:
    #SHELL1
    while :
    do
        modprobe netdevsim
        echo 1 > /sys/bus/netdevsim/new_device
        modprobe -rv netdevsim
    done

    #SHELL2
    while :
    do
        cat /sys/kernel/debug/netdevsim/netdevsim1/ports/0/ipsec
    done

Splat looks like:
[  298.766738][T14664] debugfs file owner did not clean up at exit: ipsec
[  298.766766][T14664] WARNING: CPU: 2 PID: 14664 at fs/debugfs/file.c:312 full_proxy_open+0x10f/0x650
[  298.768595][T14664] Modules linked in: netdevsim(-) openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 n][  298.771343][T14664] CPU: 2 PID: 14664 Comm: cat Tainted: G        W         5.5.0+ #1
[  298.772373][T14664] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[  298.773545][T14664] RIP: 0010:full_proxy_open+0x10f/0x650
[  298.774247][T14664] Code: 48 c1 ea 03 80 3c 02 00 0f 85 c1 04 00 00 49 8b 3c 24 e8 e4 b5 78 ff 84 c0 75 2d 4c 89 ee 48
[  298.776782][T14664] RSP: 0018:ffff88805b7df9b8 EFLAGS: 00010282[  298.777583][T14664] RAX: dffffc0000000008 RBX: ffff8880511725c0 RCX: 0000000000000000
[  298.778610][T14664] RDX: 0000000000000000 RSI: 0000000000000006 RDI: ffff8880540c5c14
[  298.779637][T14664] RBP: 0000000000000000 R08: fffffbfff15235ad R09: 0000000000000000
[  298.780664][T14664] R10: 0000000000000001 R11: 0000000000000000 R12: ffffffffc06b5000
[  298.781702][T14664] R13: ffff88804c234a88 R14: ffff88804c22dd00 R15: ffffffff8a1b5660
[  298.782722][T14664] FS:  00007fafa13a8540(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000
[  298.783845][T14664] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  298.784672][T14664] CR2: 00007fafa0e9cd10 CR3: 000000004b286005 CR4: 00000000000606e0
[  298.785739][T14664] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  298.786769][T14664] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  298.787785][T14664] Call Trace:
[  298.788237][T14664]  do_dentry_open+0x63c/0xf50
[  298.788872][T14664]  ? open_proxy_open+0x270/0x270
[  298.789524][T14664]  ? __x64_sys_fchdir+0x180/0x180
[  298.790169][T14664]  ? inode_permission+0x65/0x390
[  298.790832][T14664]  path_openat+0xc45/0x2680
[  298.791425][T14664]  ? save_stack+0x69/0x80
[  298.791988][T14664]  ? save_stack+0x19/0x80
[  298.792544][T14664]  ? path_mountpoint+0x2e0/0x2e0
[  298.793233][T14664]  ? check_chain_key+0x236/0x5d0
[  298.793910][T14664]  ? sched_clock_cpu+0x18/0x170
[  298.794527][T14664]  ? find_held_lock+0x39/0x1d0
[  298.795153][T14664]  do_filp_open+0x16a/0x260
[ ... ]

Fixes: 9fd4dcece43a ("debugfs: prevent access to possibly dead file_operations at file open")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://lore.kernel.org/r/20200218043150.29447-1-ap420073@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: keep bdi->io_pages in sync with max_sectors_kb for stacked devices

[ Upstream commit e74d93e96d721c4297f2a900ad0191890d2fc2b0 ]

Field bdi->io_pages added in commit 9491ae4aade6 ("mm: don't cap request
size based on read-ahead setting") removes unneeded split of read requests.

Stacked drivers do not call blk_queue_max_hw_sectors(). Instead they set
limits of their devices by blk_set_stacking_limits() + disk_stack_limits().
Field bio->io_pages stays zero until user set max_sectors_kb via sysfs.

This patch updates io_pages after merging limits in disk_stack_limits().

Commit c6d6e9b0f6b4 ("dm: do not allow readahead to limit IO size") fixed
the same problem for device-mapper devices, this one fixes MD RAIDs.

Fixes: 9491ae4aade6 ("mm: don't cap request size based on read-ahead setting")
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dma-mapping: Fix dma_pgprot() for unencrypted coherent pages

[ Upstream commit 17c4a2ae15a7aaefe84bdb271952678c5c9cd8e1 ]

When dma_mmap_coherent() sets up a mapping to unencrypted coherent memory
under SEV encryption and sometimes under SME encryption, it will actually
set up an encrypted mapping rather than an unencrypted, causing devices
that DMAs from that memory to read encrypted contents. Fix this.

When force_dma_unencrypted() returns true, the linear kernel map of the
coherent pages have had the encryption bit explicitly cleared and the
page content is unencrypted. Make sure that any additional PTEs we set
up to these pages also have the encryption bit cleared by having
dma_pgprot() return a protection with the encryption bit cleared in this
case.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lkml.kernel.org/r/20200304114527.3636-3-thomas_os@shipmail.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86: Don't let pgprot_modify() change the page encryption bit

[ Upstream commit 6db73f17c5f155dbcfd5e48e621c706270b84df0 ]

When SEV or SME is enabled and active, vm_get_page_prot() typically
returns with the encryption bit set. This means that users of
pgprot_modify(, vm_get_page_prot()) (mprotect_fixup(), do_mmap()) end up
with a value of vma->vm_pg_prot that is not consistent with the intended
protection of the PTEs.

This is also important for fault handlers that rely on the VMA
vm_page_prot to set the page protection. Fix this by not allowing
pgprot_modify() to change the encryption bit, similar to how it's done
for PAT bits.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lkml.kernel.org/r/20200304114527.3636-2-thomas_os@shipmail.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: EC: Do not clear boot_ec_is_ecdt in acpi_ec_add()

[ Upstream commit 65a691f5f8f0bb63d6a82eec7b0ffd193d8d8a5f ]

The reason for clearing boot_ec_is_ecdt in acpi_ec_add() (if a
PNP0C09 device object matching the ECDT boot EC had been found in
the namespace) was to cause acpi_ec_ecdt_start() to return early,
but since the latter does not look at boot_ec_is_ecdt any more,
acpi_ec_add() need not clear it.

Moreover, doing that may be confusing as it may cause "DSDT" to be
printed instead of "ECDT" in the EC initialization completion
message, so stop doing it.

While at it, split the EC initialization completion message into
two messages, one regarding the boot EC and another one printed
regardless of whether or not the EC at hand is the boot one.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xhci: bail out early if driver can't accress host in resume

[ Upstream commit 72ae194704da212e2ec312ab182a96799d070755 ]

Bail out early if the xHC host needs to be reset at resume
but driver can't access xHC PCI registers.

If xhci driver already fails to reset the controller then there
is no point in attempting to free, re-initialize, re-allocate and
re-start the host. If failure to access the host is detected later,
failing the resume, xhci interrupts will be double freed
when remove is called.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200312144517.1593-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: imx: imx7-media-csi: Fix video field handling

[ Upstream commit f7b8488bd39ae8feced4dfbb41cf1431277b893f ]

Commit 4791bd7d6adc ("media: imx: Try colorimetry at both sink and
source pads") reworked the way that formats are set on the sink pad of
the CSI subdevice, and accidentally removed video field handling.
Restore it by defaulting to V4L2_FIELD_NONE if the field value isn't
supported, with the only two supported value being V4L2_FIELD_NONE and
V4L2_FIELD_INTERLACED.

Fixes: 4791bd7d6adc ("media: imx: Try colorimetry at both sink and source pads")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: imx: imx7_mipi_csis: Power off the source when stopping streaming

[ Upstream commit 770cbf89f90b0663499dbb3f03aa81b3322757ec ]

The .s_stream() implementation incorrectly powers on the source when
stopping the stream. Power it off instead.

Fixes: 7807063b862b ("media: staging/imx7: add MIPI CSI-2 receiver subdev for i.MX7")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

null_blk: fix spurious IO errors after failed past-wp access

[ Upstream commit ff77042296d0a54535ddf74412c5ae92cb4ec76a ]

Steps to reproduce:

BLKRESETZONE zone 0

// force EIO
pwrite(fd, buf, 4096, 4096);

[issue more IO including zone ioctls]

It will start failing randomly including IO to unrelated zones because of
->error "reuse". Trigger can be partition detection as well if test is not
run immediately which is even more entertaining.

The fix is of course to clear ->error where necessary.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alexey Dobriyan (SK hynix) <adobriyan@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

null_blk: Handle null_add_dev() failures properly

[ Upstream commit 9b03b713082a31a5b90e0a893c72aa620e255c26 ]

If null_add_dev() fails then null_del_dev() is called with a NULL argument.
Make null_del_dev() handle this scenario correctly. This patch fixes the
following KASAN complaint:

null-ptr-deref in null_del_dev+0x28/0x280 [null_blk]
Read of size 8 at addr 0000000000000000 by task find/1062

Call Trace:
dump_stack+0xa5/0xe6
__kasan_report.cold+0x65/0x99
kasan_report+0x16/0x20
__asan_load8+0x58/0x90
null_del_dev+0x28/0x280 [null_blk]
nullb_group_drop_item+0x7e/0xa0 [null_blk]
client_drop_item+0x53/0x80 [configfs]
configfs_rmdir+0x395/0x4e0 [configfs]
vfs_rmdir+0xb6/0x220
do_rmdir+0x238/0x2c0
__x64_sys_unlinkat+0x75/0x90
do_syscall_64+0x6f/0x2f0
entry_SYSCALL_64_after_hwframe+0x49/0xbe

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

null_blk: Fix the null_add_dev() error path

[ Upstream commit 2004bfdef945fe55196db6b9cdf321fbc75bb0de ]

If null_add_dev() fails, clear dev->nullb.

This patch fixes the following KASAN complaint:

BUG: KASAN: use-after-free in nullb_device_submit_queues_store+0xcf/0x160 [null_blk]
Read of size 8 at addr ffff88803280fc30 by task check/8409

Call Trace:
dump_stack+0xa5/0xe6
print_address_description.constprop.0+0x26/0x260
__kasan_report.cold+0x7b/0x99
kasan_report+0x16/0x20
__asan_load8+0x58/0x90
nullb_device_submit_queues_store+0xcf/0x160 [null_blk]
configfs_write_file+0x1c4/0x250 [configfs]
__vfs_write+0x4c/0x90
vfs_write+0x145/0x2c0
ksys_write+0xd7/0x180
__x64_sys_write+0x47/0x50
do_syscall_64+0x6f/0x2f0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7ff370926317
Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
RSP: 002b:00007fff2dd2da48 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007ff370926317
RDX: 0000000000000002 RSI: 0000559437ef23f0 RDI: 0000000000000001
RBP: 0000559437ef23f0 R08: 000000000000000a R09: 0000000000000001
R10: 0000559436703471 R11: 0000000000000246 R12: 0000000000000002
R13: 00007ff370a006a0 R14: 00007ff370a014a0 R15: 00007ff370a008a0

Allocated by task 8409:
save_stack+0x23/0x90
__kasan_kmalloc.constprop.0+0xcf/0xe0
kasan_kmalloc+0xd/0x10
kmem_cache_alloc_node_trace+0x129/0x4c0
null_add_dev+0x24a/0xe90 [null_blk]
nullb_device_power_store+0x1b6/0x270 [null_blk]
configfs_write_file+0x1c4/0x250 [configfs]
__vfs_write+0x4c/0x90
vfs_write+0x145/0x2c0
ksys_write+0xd7/0x180
__x64_sys_write+0x47/0x50
do_syscall_64+0x6f/0x2f0
entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 8409:
save_stack+0x23/0x90
__kasan_slab_free+0x112/0x160
kasan_slab_free+0x12/0x20
kfree+0xdf/0x250
null_add_dev+0xaf3/0xe90 [null_blk]
nullb_device_power_store+0x1b6/0x270 [null_blk]
configfs_write_file+0x1c4/0x250 [configfs]
__vfs_write+0x4c/0x90
vfs_write+0x145/0x2c0
ksys_write+0xd7/0x180
__x64_sys_write+0x47/0x50
do_syscall_64+0x6f/0x2f0
entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 2984c8684f96 ("nullb: factor disk parameters")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: arm_sdei: fix double-lock on hibernate with shared events

[ Upstream commit 6ded0b61cf638bf9f8efe60ab8ba23db60ea9763 ]

SDEI has private events that must be registered on each CPU. When
CPUs come and go they must re-register and re-enable their private
events. Each event has flags to indicate whether this should happen
to protect against an event being registered on a CPU coming online,
while all the others are unregistering the event.

These flags are protected by the sdei_list_lock spinlock, because
the cpuhp callbacks can't take the mutex.

Hibernate needs to unregister all events, but keep the in-memory
re-register and re-enable as they are. sdei_unregister_shared()
takes the spinlock to walk the list, then calls _sdei_event_unregister()
on each shared event. _sdei_event_unregister() tries to take the
same spinlock to update re-register and re-enable. This doesn't go
so well.

Push the re-register and re-enable updates out to their callers.
sdei_unregister_shared() doesn't want these values updated, so
doesn't need to do anything.

This also fixes shared events getting lost over hibernate as this
path made them look unregistered.

Fixes: da351827240e ("firmware: arm_sdei: Add support for CPU and system power states")
Reported-by: Liguang Zhang <zhangliguang@linux.alibaba.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: venus: hfi_parser: Ignore HEVC encoding for V1

[ Upstream commit c50cc6dc6c48300af63a6fbc71b647053c15fc80 ]

Some older MSM8916 Venus firmware versions also seem to indicate
support for encoding HEVC, even though they really can't.
This will lead to errors later because hfi_session_init() fails
in this case.

HEVC is already ignored for "dec_codecs", so add the same for
"enc_codecs" to make these old firmware versions work correctly.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: wilc1000: avoid double unlocking of 'wilc->hif_cs' mutex

[ Upstream commit 6c411581caef6e3b2c286871641018364c6db50a ]

Possible double unlocking of 'wilc->hif_cs' mutex was identified by
smatch [1]. Removed the extra call to release_bus() in
wilc_wlan_handle_txq() which was missed in earlier commit fdc2ac1aafc6
("staging: wilc1000: support suspend/resume functionality").

[1]. https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org/thread/NOEVW7C3GV74EWXJO3XX6VT2NKVB2HMT/

Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Link: https://lore.kernel.org/r/20200221170120.15739-1-ajay.kathat@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: imx6q: Fixes unwanted cpu overclocking on i.MX6ULL

[ Upstream commit 36eb7dc1bd42fe5f850329c893768ff89b696fba ]

imx6ul_opp_check_speed_grading is called for both i.MX6UL and i.MX6ULL.
Since the i.MX6ULL was introduced to a separate ocotp compatible node
later, it is possible that the i.MX6ULL has also dtbs with
"fsl,imx6ull-ocotp". On a system without nvmem-cell speed grade a
missing check on this node causes a driver fail without considering
the cpu speed grade.

This patch prevents unwanted cpu overclocking on i.MX6ULL with compatible
node "fsl,imx6ull-ocotp" in old dtbs without nvmem-cell speed grade.

Fixes: 2733fb0d0699 ("cpufreq: imx6q: read OCOTP through nvmem for imx6ul/imx6ull")
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: rc: add keymap for Videostrong KII Pro

[ Upstream commit 30defecb98400575349a7d32f0526e1dc42ea83e ]

This is an NEC remote control device shipped with the Videostrong KII Pro
tv box as well as other devices from videostrong.

Signed-off-by: Mohammad Rasim <mohammad.rasim96@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: pca-platform: Use platform_irq_get_optional

[ Upstream commit 14c1fe699cad9cb0acda4559c584f136d18fea50 ]

The interrupt is not required so use platform_irq_get_optional() to
avoid error messages like

i2c-pca-platform 22080000.i2c: IRQ index 0 not found

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: st: fix missing struct parameter description

[ Upstream commit f491c6687332920e296d0209e366fe2ca7eab1c6 ]

Fix a missing struct parameter description to allow
warning free W=1 compilation.

Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qlcnic: Fix bad kzalloc null test

[ Upstream commit bcaeb886ade124331a6f3a5cef34a3f1484c0a03 ]

In qlcnic_83xx_get_reset_instruction_template, the variable
of null test is bad, so correct it.

Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cfg80211: Do not warn on same channel at the end of CSA

[ Upstream commit 05dcb8bb258575a8dd3499d0d78bd2db633c2b23 ]

When cfg80211_update_assoc_bss_entry() is called, there is a
verification that the BSS channel actually changed. As some APs use
CSA also for bandwidth changes, this would result with a kernel
warning.

Fix this by removing the WARN_ON().

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200326150855.96316ada0e8d.I6710376b1b4257e5f4712fc7ab16e2b638d512aa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/scheduler: fix rare NULL ptr race

[ Upstream commit 77bb2f204f1f0a53a602a8fd15816d6826212077 ]

There is one one corner case at dma_fence_signal_locked
which will raise the NULL pointer problem just like below.
->dma_fence_signal
    ->dma_fence_signal_locked
->test_and_set_bit
here trigger dma_fence_release happen due to the zero of fence refcount.

->dma_fence_put
    ->dma_fence_release
->drm_sched_fence_release_scheduled
    ->call_rcu
here make the union fled “cb_list” at finished fence
to NULL because struct rcu_head contains two pointer
which is same as struct list_head cb_list

Therefore, to hold the reference of finished fence at drm_sched_process_job
to prevent the null pointer during finished fence dma_fence_signal

[  732.912867] BUG: kernel NULL pointer dereference, address: 0000000000000008
[  732.914815] #PF: supervisor write access in kernel mode
[  732.915731] #PF: error_code(0x0002) - not-present page
[  732.916621] PGD 0 P4D 0
[  732.917072] Oops: 0002 [#1] SMP PTI
[  732.917682] CPU: 7 PID: 0 Comm: swapper/7 Tainted: G           OE     5.4.0-rc7 #1
[  732.918980] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014
[  732.920906] RIP: 0010:dma_fence_signal_locked+0x3e/0x100
[  732.938569] Call Trace:
[  732.939003]  <IRQ>
[  732.939364]  dma_fence_signal+0x29/0x50
[  732.940036]  drm_sched_fence_finished+0x12/0x20 [gpu_sched]
[  732.940996]  drm_sched_process_job+0x34/0xa0 [gpu_sched]
[  732.941910]  dma_fence_signal_locked+0x85/0x100
[  732.942692]  dma_fence_signal+0x29/0x50
[  732.943457]  amdgpu_fence_process+0x99/0x120 [amdgpu]
[  732.944393]  sdma_v4_0_process_trap_irq+0x81/0xa0 [amdgpu]

v2: hold the finished fence at drm_sched_process_job instead of
    amdgpu_fence_process
v3: resume the blank line

Signed-off-by: Yintian Tao <yttao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxgb4/ptp: pass the sign of offset delta in FW CMD

[ Upstream commit 50e0d28d3808146cc19b0d5564ef4ba9e5bf3846 ]

cxgb4_ptp_fineadjtime() doesn't pass the signedness of offset delta
in FW_PTP_CMD. Fix it by passing correct sign.

Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/net: add definition for SOL_DCCP to fix compilation errors for old libc

[ Upstream commit 83a9b6f639e9f6b632337f9776de17d51d969c77 ]

Many systems build/test up-to-date kernels with older libcs, and
an older glibc (2.17) lacks the definition of SOL_DCCP in
/usr/include/bits/socket.h (it was added in the 4.6 timeframe).

Adding the definition to the test program avoids a compilation
failure that gets in the way of building tools/testing/selftests/net.
The test itself will work once the definition is added; either
skipping due to DCCP not being configured in the kernel under test
or passing, so there are no other more up-to-date glibc dependencies
here it seems beyond that missing definition.

Fixes: 11fb60d1089f ("selftests: net: reuseport_addr_any: add DCCP")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hinic: fix wrong value of MIN_SKB_LEN

[ Upstream commit 7296695fc16dd1761dbba8b68a9181c71cef0633 ]

the minimum value of skb len that hw supports is 32 rather than 17

Signed-off-by: Luo bin <luobin9@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hinic: fix wrong para of wait_for_completion_timeout

[ Upstream commit 0da7c322f116210ebfdda59c7da663a6fc5e9cc8 ]

the second input parameter of wait_for_completion_timeout should
be jiffies instead of millisecond

Signed-off-by: Luo bin <luobin9@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hinic: fix out-of-order excution in arm cpu

[ Upstream commit 33f15da216a1f4566b4ec880942556ace30615df ]

add read barrier in driver code to keep from reading other fileds
in dma memory which is writable for hw until we have verified the
memory is valid for driver

Signed-off-by: Luo bin <luobin9@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hinic: fix the bug of clearing event queue

[ Upstream commit 614eaa943e9fc3fcdbd4aa0692ae84973d363333 ]

should disable eq irq before freeing it, must clear event queue
depth in hw before freeing relevant memory to avoid illegal
memory access and update consumer idx to avoid invalid interrupt

Signed-off-by: Luo bin <luobin9@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hinic: fix a bug of waitting for IO stopped

[ Upstream commit 96758117dc528e6d84bd23d205e8cf7f31eda029 ]

it's unreliable for fw to check whether IO is stopped, so driver
wait for enough time to ensure IO process is done in hw before
freeing resources

Signed-off-by: Luo bin <luobin9@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: vxge: fix wrong __VA_ARGS__ usage

[ Upstream commit b317538c47943f9903860d83cc0060409e12d2ff ]

printk in macro vxge_debug_ll uses __VA_ARGS__ without "##" prefix,
it causes a build error when there is no variable
arguments(e.g. only fmt is specified.).

Signed-off-by: Zheng Wei <wei.zheng@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: platform: Fix misleading interrupt error msg

[ Upstream commit fc191af1bb0d069dc7e981076e8b80af21f1e61d ]

Not every stmmac based platform makes use of the eth_wake_irq or eth_lpi
interrupts. Use the platform_get_irq_byname_optional variant for these
interrupts, so no error message is displayed, if they can't be found.
Rather print an information to hint something might be wrong to assist
debugging on platforms which use these interrupts.

Signed-off-by: Markus Fuchs <mklntf@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rxrpc: Fix call interruptibility handling

[ Upstream commit e138aa7d3271ac1b0690ae2c9b04d51468dce1d6 ]

Fix the interruptibility of kernel-initiated client calls so that they're
either only interruptible when they're waiting for a call slot to come
available or they're not interruptible at all.  Either way, they're not
interruptible during transmission.

This should help prevent StoreData calls from being interrupted when
writeback is in progress.  It doesn't, however, handle interruption during
the receive phase.

Userspace-initiated calls are still interruptable.  After the signal has
been handled, sendmsg() will return the amount of data copied out of the
buffer and userspace can perform another sendmsg() call to continue
transmission.

Fixes: bc5e3a546d55 ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rxrpc: Abstract out the calculation of whether there's Tx space

[ Upstream commit 158fe6665389964a1de212818b4a5c52b7f7aff4 ]

Abstract out the calculation of there being sufficient Tx buffer space.
This is reproduced several times in the rxrpc sendmsg code.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: fsl: dpio: register dpio irq handlers after dpio create

[ Upstream commit fe8fe7723a3a824790bda681b40efd767e2251a7 ]

The dpio irqs must be registered when you can actually
receive interrupts, ie when the dpios are created.
Kernel goes through NULL pointer dereference errors
followed by kernel panic [1] because the dpio irqs are
enabled before the dpio is created.

[1]
Unable to handle kernel NULL pointer dereference at virtual address 0040
fsl_mc_dpio dpio.14: probed
fsl_mc_dpio dpio.13: Adding to iommu group 11
  ISV = 0, ISS = 0x00000004
Unable to handle kernel NULL pointer dereference at virtual address 0040
Mem abort info:
  ESR = 0x96000004
  EC = 0x25: DABT (current EL), IL = 32 bits
  SET = 0, FnV = 0
  EA = 0, S1PTW = 0
Data abort info:
  ISV = 0, ISS = 0x00000004
  CM = 0, WnR = 0
[0000000000000040] user address but active_mm is swapper
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 2 PID: 151 Comm: kworker/2:1 Not tainted 5.6.0-rc4-next-20200304 #1
Hardware name: NXP Layerscape LX2160ARDB (DT)
Workqueue: events deferred_probe_work_func
pstate: 00000085 (nzcv daIf -PAN -UAO)
pc : dpaa2_io_irq+0x18/0xe0
lr : dpio_irq_handler+0x1c/0x28
sp : ffff800010013e20
x29: ffff800010013e20 x28: ffff0026d9b4c140
x27: ffffa1d38a142018 x26: ffff0026d2953400
x25: ffffa1d38a142018 x24: ffffa1d38a7ba1d8
x23: ffff800010013f24 x22: 0000000000000000
x21: 0000000000000072 x20: ffff0026d2953400
x19: ffff0026d2a68b80 x18: 0000000000000001
x17: 000000002fb37f3d x16: 0000000035eafadd
x15: ffff0026d9b4c5b8 x14: ffffffffffffffff
x13: ff00000000000000 x12: 0000000000000038
x11: 0101010101010101 x10: 0000000000000040
x9 : ffffa1d388db11e4 x8 : ffffa1d38a7e40f0
x7 : ffff0026da414f38 x6 : 0000000000000000
x5 : ffff0026da414d80 x4 : ffff5e5353d0c000
x3 : ffff800010013f60 x2 : ffffa1d388db11c8
x1 : ffff0026d2a67c00 x0 : 0000000000000000
Call trace:
dpaa2_io_irq+0x18/0xe0
dpio_irq_handler+0x1c/0x28
__handle_irq_event_percpu+0x78/0x2c0
handle_irq_event_percpu+0x38/0x90
handle_irq_event+0x4c/0xd0
handle_fasteoi_irq+0xbc/0x168
generic_handle_irq+0x2c/0x40
__handle_domain_irq+0x68/0xc0
gic_handle_irq+0x64/0x150
el1_irq+0xb8/0x180
_raw_spin_unlock_irqrestore+0x14/0x48
irq_set_affinity_hint+0x6c/0xa0
dpaa2_dpio_probe+0x2a4/0x518
fsl_mc_driver_probe+0x28/0x70
really_probe+0xdc/0x320
driver_probe_device+0x5c/0xf0
__device_attach_driver+0x88/0xc0
bus_for_each_drv+0x7c/0xc8
__device_attach+0xe4/0x140
device_initial_probe+0x18/0x20
bus_probe_device+0x98/0xa0
device_add+0x41c/0x758
fsl_mc_device_add+0x184/0x530
dprc_scan_objects+0x280/0x370
dprc_probe+0x124/0x3b0
fsl_mc_driver_probe+0x28/0x70
really_probe+0xdc/0x320
driver_probe_device+0x5c/0xf0
__device_attach_driver+0x88/0xc0
bus_for_each_drv+0x7c/0xc8
__device_attach+0xe4/0x140
device_initial_probe+0x18/0x20
bus_probe_device+0x98/0xa0
deferred_probe_work_func+0x74/0xa8
process_one_work+0x1c8/0x470
worker_thread+0x1f8/0x428
kthread+0x124/0x128
ret_from_fork+0x10/0x18
Code: a9bc7bfd 910003fd a9025bf5 a90363f7 (f9402015)
---[ end trace 38298e1a29e7a570 ]---
Kernel panic - not syncing: Fatal exception in interrupt
SMP: stopping secondary CPUs
Mem abort info:
  ESR = 0x96000004
  CM = 0, WnR = 0
  EC = 0x25: DABT (current EL), IL = 32 bits
[0000000000000040] user address but active_mm is swapper
  SET = 0, FnV = 0
  EA = 0, S1PTW = 0
Data abort info:
  ISV = 0, ISS = 0x00000004
  CM = 0, WnR = 0
[0000000000000040] user address but active_mm is swapper
SMP: failed to stop secondary CPUs 0-2
Kernel Offset: 0x21d378600000 from 0xffff800010000000
PHYS_OFFSET: 0xffffe92180000000
CPU features: 0x10002,21806008
Memory Limit: none
---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Grigore Popescu <grigore.popescu@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: tm2-touchkey - add support for Coreriver TC360 variant

[ Upstream commit da3289044833769188c0da945d2cec90af35e87e ]

The Coreriver TouchCore 360 is like the midas board touchkey, but it is
using a fixed regulator.

Signed-off-by: Nick Reitemeyer <nick.reitemeyer@web.de>
Link: https://lore.kernel.org/r/20200121141525.3404-3-nick.reitemeyer@web.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: mvm: Fix rate scale NSS configuration

[ Upstream commit ce19801ba75a902ab515dda03b57738c708d0781 ]

The TLC configuration did not take into consideration the station's
SMPS configuration, and thus configured rates for 2 NSS even if
static SMPS was reported by the station. Fix this.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200306151129.b4f940d13eca.Ieebfa889d08205a3a961ae0138fb5832e8a0f9c1@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Fix deadlock with rq_lock in bpf_send_signal()

[ Upstream commit 1bc7896e9ef44fd77858b3ef0b8a6840be3a4494 ]

When experimenting with bpf_send_signal() helper in our production
environment (5.2 based), we experienced a deadlock in NMI mode:
   #5 [ffffc9002219f770] queued_spin_lock_slowpath at ffffffff8110be24
   #6 [ffffc9002219f770] _raw_spin_lock_irqsave at ffffffff81a43012
   #7 [ffffc9002219f780] try_to_wake_up at ffffffff810e7ecd
   #8 [ffffc9002219f7e0] signal_wake_up_state at ffffffff810c7b55
   #9 [ffffc9002219f7f0] __send_signal at ffffffff810c8602
  #10 [ffffc9002219f830] do_send_sig_info at ffffffff810ca31a
  #11 [ffffc9002219f868] bpf_send_signal at ffffffff8119d227
  #12 [ffffc9002219f988] bpf_overflow_handler at ffffffff811d4140
  #13 [ffffc9002219f9e0] __perf_event_overflow at ffffffff811d68cf
  #14 [ffffc9002219fa10] perf_swevent_overflow at ffffffff811d6a09
  #15 [ffffc9002219fa38] ___perf_sw_event at ffffffff811e0f47
  #16 [ffffc9002219fc30] __schedule at ffffffff81a3e04d
  #17 [ffffc9002219fc90] schedule at ffffffff81a3e219
  #18 [ffffc9002219fca0] futex_wait_queue_me at ffffffff8113d1b9
  #19 [ffffc9002219fcd8] futex_wait at ffffffff8113e529
  #20 [ffffc9002219fdf0] do_futex at ffffffff8113ffbc
  #21 [ffffc9002219fec0] __x64_sys_futex at ffffffff81140d1c
  #22 [ffffc9002219ff38] do_syscall_64 at ffffffff81002602
  #23 [ffffc9002219ff50] entry_SYSCALL_64_after_hwframe at ffffffff81c00068

The above call stack is actually very similar to an issue
reported by Commit eac9153f2b58 ("bpf/stackmap: Fix deadlock with
rq_lock in bpf_get_stack()") by Song Liu. The only difference is
bpf_send_signal() helper instead of bpf_get_stack() helper.

The above deadlock is triggered with a perf_sw_event.
Similar to Commit eac9153f2b58, the below almost identical reproducer
used tracepoint point sched/sched_switch so the issue can be easily caught.
  /* stress_test.c */
  #include <stdio.h>
  #include <stdlib.h>
  #include <sys/mman.h>
  #include <pthread.h>
  #include <sys/types.h>
  #include <sys/stat.h>
  #include <fcntl.h>

  #define THREAD_COUNT 1000
  char *filename;
  void *worker(void *p)
  {
        void *ptr;
        int fd;
        char *pptr;

        fd = open(filename, O_RDONLY);
        if (fd < 0)
                return NULL;
        while (1) {
                struct timespec ts = {0, 1000 + rand() % 2000};

                ptr = mmap(NULL, 4096 * 64, PROT_READ, MAP_PRIVATE, fd, 0);
                usleep(1);
                if (ptr == MAP_FAILED) {
                        printf("failed to mmap\n");
                        break;
                }
                munmap(ptr, 4096 * 64);
                usleep(1);
                pptr = malloc(1);
                usleep(1);
                pptr[0] = 1;
                usleep(1);
                free(pptr);
                usleep(1);
                nanosleep(&ts, NULL);
        }
        close(fd);
        return NULL;
  }

  int main(int argc, char *argv[])
  {
        void *ptr;
        int i;
        pthread_t threads[THREAD_COUNT];

        if (argc < 2)
                return 0;

        filename = argv[1];

        for (i = 0; i < THREAD_COUNT; i++) {
                if (pthread_create(threads + i, NULL, worker, NULL)) {
                        fprintf(stderr, "Error creating thread\n");
                        return 0;
                }
        }

        for (i = 0; i < THREAD_COUNT; i++)
                pthread_join(threads[i], NULL);
        return 0;
  }
and the following command:
  1. run `stress_test /bin/ls` in one windown
  2. hack bcc trace.py with the following change:
#     --- a/tools/trace.py
#     +++ b/tools/trace.py
     @@ -513,6 +513,7 @@ BPF_PERF_OUTPUT(%s);
              __data.tgid = __tgid;
              __data.pid = __pid;
              bpf_get_current_comm(&__data.comm, sizeof(__data.comm));
     +        bpf_send_signal(10);
      %s
      %s
              %s.perf_submit(%s, &__data, sizeof(__data));
  3. in a different window run
     ./trace.py -p $(pidof stress_test) t:sched:sched_switch

The deadlock can be reproduced in our production system.

Similar to Song's fix, the fix is to delay sending signal if
irqs is disabled to avoid deadlocks involving with rq_lock.
With this change, my above stress-test in our production system
won't cause deadlock any more.

I also implemented a scale-down version of reproducer in the
selftest (a subsequent commit). With latest bpf-next,
it complains for the following potential deadlock.
  [   32.832450] -> #1 (&p->pi_lock){-.-.}:
  [   32.833100]        _raw_spin_lock_irqsave+0x44/0x80
  [   32.833696]        task_rq_lock+0x2c/0xa0
  [   32.834182]        task_sched_runtime+0x59/0xd0
  [   32.834721]        thread_group_cputime+0x250/0x270
  [   32.835304]        thread_group_cputime_adjusted+0x2e/0x70
  [   32.835959]        do_task_stat+0x8a7/0xb80
  [   32.836461]        proc_single_show+0x51/0xb0
  ...
  [   32.839512] -> #0 (&(&sighand->siglock)->rlock){....}:
  [   32.840275]        __lock_acquire+0x1358/0x1a20
  [   32.840826]        lock_acquire+0xc7/0x1d0
  [   32.841309]        _raw_spin_lock_irqsave+0x44/0x80
  [   32.841916]        __lock_task_sighand+0x79/0x160
  [   32.842465]        do_send_sig_info+0x35/0x90
  [   32.842977]        bpf_send_signal+0xa/0x10
  [   32.843464]        bpf_prog_bc13ed9e4d3163e3_send_signal_tp_sched+0x465/0x1000
  [   32.844301]        trace_call_bpf+0x115/0x270
  [   32.844809]        perf_trace_run_bpf_submit+0x4a/0xc0
  [   32.845411]        perf_trace_sched_switch+0x10f/0x180
  [   32.846014]        __schedule+0x45d/0x880
  [   32.846483]        schedule+0x5f/0xd0
  ...

  [   32.853148] Chain exists of:
  [   32.853148]   &(&sighand->siglock)->rlock --> &p->pi_lock --> &rq->lock
  [   32.853148]
  [   32.854451]  Possible unsafe locking scenario:
  [   32.854451]
  [   32.855173]        CPU0                    CPU1
  [   32.855745]        ----                    ----
  [   32.856278]   lock(&rq->lock);
  [   32.856671]                                lock(&p->pi_lock);
  [   32.857332]                                lock(&rq->lock);
  [   32.857999]   lock(&(&sighand->siglock)->rlock);

  Deadlock happens on CPU0 when it tries to acquire &sighand->siglock
  but it has been held by CPU1 and CPU1 tries to grab &rq->lock
  and cannot get it.

  This is not exactly the callstack in our production environment,
  but sympotom is similar and both locks are using spin_lock_irqsave()
  to acquire the lock, and both involves rq_lock. The fix to delay
  sending signal when irq is disabled also fixed this issue.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200304191104.2796501-1-yhs@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: Fix dm814x Ethernet by changing to use rgmii-id mode

[ Upstream commit b46b2b7ba6e104d265ab705914859ec0db7a98c5 ]

Commit cd28d1d6e52e ("net: phy: at803x: Disable phy delay for RGMII mode")
caused a regression for dm814x boards where NFSroot would no longer work.

Let's fix the issue by configuring "rgmii-id" mode as internal delays are
needed that is no longer the case with "rgmii" mode.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: sunxi-rsb: Return correct data when mixing 16-bit and 8-bit reads

[ Upstream commit a43ab30dcd4a1abcdd0d2461bf1cf7c0817f6cd3 ]

When doing a 16-bit read that returns data in the MSB byte, the
RSB_DATA register will keep the MSB byte unchanged when doing
the following 8-bit read. sunxi_rsb_read() will then return
a result that contains high byte from 16-bit read mixed with
the 8-bit result.

The consequence is that after this happens the PMIC's regmap will
look like this: (0x33 is the high byte from the 16-bit read)

% cat /sys/kernel/debug/regmap/sunxi-rsb-3a3/registers
00: 33
01: 33
02: 33
03: 33
04: 33
05: 33
06: 33
07: 33
08: 33
09: 33
0a: 33
0b: 33
0c: 33
0d: 33
0e: 33
[snip]

Fix this by masking the result of the read with the correct mask
based on the size of the read. There are no 16-bit users in the
mainline kernel, so this doesn't need to get into the stable tree.

Signed-off-by: Ondrej Jirman <megous@megous.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: sun8i-a83t-tbs-a711: HM5065 doesn't like such a high voltage

[ Upstream commit a40550952c000667b20082d58077bc647da6c890 ]

Lowering the voltage solves the quick image degradation over time
(minutes), that was probably caused by overheating.

Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 5.4.32

iommu/vt-d: Allow devices with RMRRs to use identity domain

commit 9235cb13d7d17baba0b3a9277381258361e95c16 upstream.

Since commit ea2447f700cab ("intel-iommu: Prevent devices with
RMRRs from being placed into SI Domain"), the Intel IOMMU driver
doesn't allow any devices with RMRR locked to use the identity
domain. This was added to to fix the issue where the RMRR info
for devices being placed in and out of the identity domain gets
lost. This identity maps all RMRRs when setting up the identity
domain, so that devices with RMRRs could also use it.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: John Donnelly <john.p.donnelly@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Fix ref->mutex deadlock in i915_active_wait()

The following deadlock exists in i915_active_wait() due to a double lock
on ref->mutex (call chain listed in order from top to bottom):
i915_active_wait();
mutex_lock_interruptible(&ref->mutex); <-- ref->mutex first acquired
i915_active_request_retire();
node_retire();
active_retire();
mutex_lock_nested(&ref->mutex, SINGLE_DEPTH_NESTING); <-- DEADLOCK

Fix the deadlock by skipping the second ref->mutex lock when
active_retire() is called through i915_active_request_retire().

Note that this bug only affects 5.4 and has since been fixed in 5.5.
Normally, a backport of the fix from 5.5 would be in order, but the
patch set that fixes this deadlock involves massive changes that are
neither feasible nor desirable for backporting [1][2][3]. Therefore,
this small patch was made to address the deadlock specifically for 5.4.

[1] 274cbf20fd10 ("drm/i915: Push the i915_active.retire into a worker")
[2] 093b92287363 ("drm/i915: Split i915_active.mutex into an irq-safe spinlock for the rbtree")
[3] 750bde2fd4ff ("drm/i915: Serialise with remote retirement")

Fixes: 12c255b5dad1 ("drm/i915: Provide an i915_active.acquire callback")
Cc: <stable@vger.kernel.org> # 5.4.x
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbcon: fix null-ptr-deref in fbcon_switch

commit b139f8b00db4a8ea75a4174346eafa48041aa489 upstream.

Set logo_shown to FBCON_LOGO_CANSHOW when the vc was deallocated.

syzkaller report: https://lkml.org/lkml/2020/3/27/403
general protection fault, probably for non-canonical address
0xdffffc000000006c: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000360-0x0000000000000367]
RIP: 0010:fbcon_switch+0x28f/0x1740
drivers/video/fbdev/core/fbcon.c:2260

Call Trace:
redraw_screen+0x2a8/0x770 drivers/tty/vt/vt.c:1008
vc_do_resize+0xfe7/0x1360 drivers/tty/vt/vt.c:1295
fbcon_init+0x1221/0x1ab0 drivers/video/fbdev/core/fbcon.c:1219
visual_init+0x305/0x5c0 drivers/tty/vt/vt.c:1062
do_bind_con_driver+0x536/0x890 drivers/tty/vt/vt.c:3542
do_take_over_console+0x453/0x5b0 drivers/tty/vt/vt.c:4122
do_fbcon_takeover+0x10b/0x210 drivers/video/fbdev/core/fbcon.c:588
fbcon_fb_registered+0x26b/0x340 drivers/video/fbdev/core/fbcon.c:3259
do_register_framebuffer drivers/video/fbdev/core/fbmem.c:1664 [inline]
register_framebuffer+0x56e/0x980 drivers/video/fbdev/core/fbmem.c:1832
dlfb_usb_probe.cold+0x1743/0x1ba3 drivers/video/fbdev/udlfb.c:1735
usb_probe_interface+0x310/0x800 drivers/usb/core/driver.c:374

accessing vc_cons[logo_shown].d->vc_top causes the bug.

Reported-by: syzbot+732528bae351682f1f27@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200329085647.25133-1-hqjagain@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-mq: Keep set->nr_hw_queues and set->map[].nr_queues in sync

commit 6e66b49392419f3fe134e1be583323ef75da1e4b upstream.

blk_mq_map_queues() and multiple .map_queues() implementations expect that
set->map[HCTX_TYPE_DEFAULT].nr_queues is set to the number of hardware
queues. Hence set .nr_queues before calling these functions. This patch
fixes the following kernel warning:

WARNING: CPU: 0 PID: 2501 at include/linux/cpumask.h:137
Call Trace:
blk_mq_run_hw_queue+0x19d/0x350 block/blk-mq.c:1508
blk_mq_run_hw_queues+0x112/0x1a0 block/blk-mq.c:1525
blk_mq_requeue_work+0x502/0x780 block/blk-mq.c:775
process_one_work+0x9af/0x1740 kernel/workqueue.c:2269
worker_thread+0x98/0xe40 kernel/workqueue.c:2415
kthread+0x361/0x430 kernel/kthread.c:255

Fixes: ed76e329d74a ("blk-mq: abstract out queue map") # v5.0
Reported-by: syzbot+d44e1b26ce5c3e77458d@syzkaller.appspotmail.com
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/cm: Update num_paths in cma_resolve_iboe_route error flow

commit 987914ab841e2ec281a35b54348ab109b4c0bb4e upstream.

After a successful allocation of path_rec, num_paths is set to 1, but any
error after such allocation will leave num_paths uncleared.

This causes to de-referencing a NULL pointer later on. Hence, num_paths
needs to be set back to 0 if such an error occurs.

The following crash from syzkaller revealed it.

  kasan: CONFIG_KASAN_INLINE enabled
  kasan: GPF could be caused by NULL-ptr deref or user memory access
  general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
  CPU: 0 PID: 357 Comm: syz-executor060 Not tainted 4.18.0+ #311
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
  rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
  RIP: 0010:ib_copy_path_rec_to_user+0x94/0x3e0
  Code: f1 f1 f1 f1 c7 40 0c 00 00 f4 f4 65 48 8b 04 25 28 00 00 00 48 89
  45 c8 31 c0 e8 d7 60 24 ff 48 8d 7b 4c 48 89 f8 48 c1 e8 03 <42> 0f b6
  14 30 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85
  RSP: 0018:ffff88006586f980 EFLAGS: 00010207
  RAX: 0000000000000009 RBX: 0000000000000000 RCX: 1ffff1000d5fe475
  RDX: ffff8800621e17c0 RSI: ffffffff820d45f9 RDI: 000000000000004c
  RBP: ffff88006586fa50 R08: ffffed000cb0df73 R09: ffffed000cb0df72
  R10: ffff88006586fa70 R11: ffffed000cb0df73 R12: 1ffff1000cb0df30
  R13: ffff88006586fae8 R14: dffffc0000000000 R15: ffff88006aff2200
  FS: 00000000016fc880(0000) GS:ffff88006d000000(0000)
  knlGS:0000000000000000
  CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000020000040 CR3: 0000000063fec000 CR4: 00000000000006b0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
  ? ib_copy_path_rec_from_user+0xcc0/0xcc0
  ? __mutex_unlock_slowpath+0xfc/0x670
  ? wait_for_completion+0x3b0/0x3b0
  ? ucma_query_route+0x818/0xc60
  ucma_query_route+0x818/0xc60
  ? ucma_listen+0x1b0/0x1b0
  ? sched_clock_cpu+0x18/0x1d0
  ? sched_clock_cpu+0x18/0x1d0
  ? ucma_listen+0x1b0/0x1b0
  ? ucma_write+0x292/0x460
  ucma_write+0x292/0x460
  ? ucma_close_id+0x60/0x60
  ? sched_clock_cpu+0x18/0x1d0
  ? sched_clock_cpu+0x18/0x1d0
  __vfs_write+0xf7/0x620
  ? ucma_close_id+0x60/0x60
  ? kernel_read+0x110/0x110
  ? time_hardirqs_on+0x19/0x580
  ? lock_acquire+0x18b/0x3a0
  ? finish_task_switch+0xf3/0x5d0
  ? _raw_spin_unlock_irq+0x29/0x40
  ? _raw_spin_unlock_irq+0x29/0x40
  ? finish_task_switch+0x1be/0x5d0
  ? __switch_to_asm+0x34/0x70
  ? __switch_to_asm+0x40/0x70
  ? security_file_permission+0x172/0x1e0
  vfs_write+0x192/0x460
  ksys_write+0xc6/0x1a0
  ? __ia32_sys_read+0xb0/0xb0
  ? entry_SYSCALL_64_after_hwframe+0x3e/0xbe
  ? do_syscall_64+0x1d/0x470
  do_syscall_64+0x9e/0x470
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 3c86aa70bf67 ("RDMA/cm: Add RDMA CM support for IBoE devices")
Link: https://lore.kernel.org/r/20200318101741.47211-1-leon@kernel.org
Signed-off-by: Avihai Horon <avihaih@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: RFCOMM: fix ODEBUG bug in rfcomm_dev_ioctl

commit 71811cac8532b2387b3414f7cd8fe9e497482864 upstream.

Needn't call 'rfcomm_dlc_put' here, because 'rfcomm_dlc_exists' didn't
increase dlc->refcnt.

Reported-by: syzbot+4496e82090657320efc6@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Suggested-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/siw: Fix passive connection establishment

commit 33fb27fd54465c74cbffba6315b2f043e90cec4c upstream.

Holding the rtnl_lock while iterating a devices interface address list
potentially causes deadlocks with the cma_netdev_callback. While this was
implemented to limit the scope of a wildcard listen to addresses of the
current device only, a better solution limits the scope of the socket to
the device. This completely avoiding locking, and also results in
significant code simplification.

Fixes: c421651fa229 ("RDMA/siw: Add missing rtnl_lock around access to ifa")
Link: https://lore.kernel.org/r/20200228173534.26815-1-bmt@zurich.ibm.com
Reported-by: syzbot+55de90ab5f44172b0c90@syzkaller.appspotmail.com
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/cma: Teach lockdep about the order of rtnl and lock

commit 32ac9e4399b12d3e54d312a0e0e30ed5cd19bd4e upstream.

This lock ordering only happens when bonding is enabled and a certain
bonding related event fires. However, since it can happen this is a global
restriction on lock ordering.

Teach lockdep about the order directly and unconditionally so bugs here
are found quickly.

See https://syzkaller.appspot.com/bug?extid=55de90ab5f44172b0c90

Link: https://lore.kernel.org/r/20200227203651.GA27185@ziepe.ca
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/ucma: Put a lock around every call to the rdma_cm layer

commit 7c11910783a1ea17e88777552ef146cace607b3c upstream.

The rdma_cm must be used single threaded.

This appears to be a bug in the design, as it does have lots of locking
that seems like it should allow concurrency. However, when it is all said
and done every single place that uses the cma_exch() scheme is broken, and
all the unlocked reads from the ucma of the cm_id data are wrong too.

syzkaller has been finding endless bugs related to this.

Fixing this in any elegant way is some enormous amount of work. Take a
very big hammer and put a mutex around everything to do with the
ucma_context at the top of every syscall.

Fixes: 75216638572f ("RDMA/cma: Export rdma cm interface to userspace")
Link: https://lore.kernel.org/r/20200218210432.GA31966@ziepe.ca
Reported-by: syzbot+adb15cf8c2798e4e0db4@syzkaller.appspotmail.com
Reported-by: syzbot+e5579222b6a3edd96522@syzkaller.appspotmail.com
Reported-by: syzbot+4b628fcc748474003457@syzkaller.appspotmail.com
Reported-by: syzbot+29ee8f76017ce6cf03da@syzkaller.appspotmail.com
Reported-by: syzbot+6956235342b7317ec564@syzkaller.appspotmail.com
Reported-by: syzbot+b358909d8d01556b790b@syzkaller.appspotmail.com
Reported-by: syzbot+6b46b135602a3f3ac99e@syzkaller.appspotmail.com
Reported-by: syzbot+8458d13b13562abf6b77@syzkaller.appspotmail.com
Reported-by: syzbot+bd034f3fdc0402e942ed@syzkaller.appspotmail.com
Reported-by: syzbot+c92378b32760a4eef756@syzkaller.appspotmail.com
Reported-by: syzbot+68b44a1597636e0b342c@syzkaller.appspotmail.com
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

include/uapi/linux/swab.h: fix userspace breakage, use __BITS_PER_LONG for swap

commit 467d12f5c7842896d2de3ced74e4147ee29e97c8 upstream.

QEMU has a funny new build error message when I use the upstream kernel
headers:

      CC      block/file-posix.o
    In file included from /home/cborntra/REPOS/qemu/include/qemu/timer.h:4,
                     from /home/cborntra/REPOS/qemu/include/qemu/timed-average.h:29,
                     from /home/cborntra/REPOS/qemu/include/block/accounting.h:28,
                     from /home/cborntra/REPOS/qemu/include/block/block_int.h:27,
                     from /home/cborntra/REPOS/qemu/block/file-posix.c:30:
    /usr/include/linux/swab.h: In function `__swab':
    /home/cborntra/REPOS/qemu/include/qemu/bitops.h:20:34: error: "sizeof" is not defined, evaluates to 0 [-Werror=undef]
       20 | #define BITS_PER_LONG           (sizeof (unsigned long) * BITS_PER_BYTE)
          |                                  ^~~~~~
    /home/cborntra/REPOS/qemu/include/qemu/bitops.h:20:41: error: missing binary operator before token "("
       20 | #define BITS_PER_LONG           (sizeof (unsigned long) * BITS_PER_BYTE)
          |                                         ^
    cc1: all warnings being treated as errors
    make: *** [/home/cborntra/REPOS/qemu/rules.mak:69: block/file-posix.o] Error 1
    rm tests/qemu-iotests/socket_scm_helper.o

This was triggered by commit d5767057c9a ("uapi: rename ext2_swab() to
swab() and share globally in swab.h").  That patch is doing

  #include <asm/bitsperlong.h>

but it uses BITS_PER_LONG.

The kernel file asm/bitsperlong.h provide only __BITS_PER_LONG.

Let us use the __ variant in swap.h

Link: http://lkml.kernel.org/r/20200213142147.17604-1-borntraeger@de.ibm.com
Fixes: d5767057c9a ("uapi: rename ext2_swab() to swab() and share globally in swab.h")
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Joe Perches <joe@perches.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ceph: canonicalize server path in place

commit b27a939e8376a3f1ed09b9c33ef44d20f18ec3d0 upstream.

syzbot reported that 4fbc0c711b24 ("ceph: remove the extra slashes in
the server path") had caused a regression where an allocation could be
done under a spinlock -- compare_mount_options() is called by sget_fc()
with sb_lock held.

We don't really need the supplied server path, so canonicalize it
in place and compare it directly. To make this work, the leading
slash is kept around and the logic in ceph_real_mount() to skip it
is restored. CEPH_MSG_CLIENT_SESSION now reports the same (i.e.
canonicalized) path, with the leading slash of course.

Fixes: 4fbc0c711b24 ("ceph: remove the extra slashes in the server path")
Reported-by: syzbot+98704a51af8e3d9425a9@syzkaller.appspotmail.com
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ceph: remove the extra slashes in the server path

commit 4fbc0c711b2464ee1551850b85002faae0b775d5 upstream.

It's possible to pass the mount helper a server path that has more
than one contiguous slash character. For example:

  $ mount -t ceph 192.168.195.165:40176:/// /mnt/cephfs/

In the MDS server side the extra slashes of the server path will be
treated as snap dir, and then we can get the following debug logs:

  ceph:  mount opening path //
  ceph:  open_root_inode opening '//'
  ceph:  fill_trace 0000000059b8a3bc is_dentry 0 is_target 1
  ceph:  alloc_inode 00000000dc4ca00b
  ceph:  get_inode created new inode 00000000dc4ca00b 1.ffffffffffffffff ino 1
  ceph:  get_inode on 1=1.ffffffffffffffff got 00000000dc4ca00b

And then when creating any new file or directory under the mount
point, we can hit the following BUG_ON in ceph_fill_trace():

  BUG_ON(ceph_snap(dir) != dvino.snap);

Have the client ignore the extra slashes in the server path when
mounting. This will also canonicalize the path, so that identical mounts
can be consilidated.

1) "//mydir1///mydir//"
2) "/mydir1/mydir"
3) "/mydir1/mydir/"

Regardless of the internal treatment of these paths, the kernel still
stores the original string including the leading '/' for presentation
to userland.

URL: https://tracker.ceph.com/issues/42771
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: imx: only select ARM_ERRATA_814220 for ARMv7-A

commit c74067a0f776c1d695a713a4388c3b6a094ee40a upstream.

i.MX7D is supported for either the v7-A or the v7-M cores,
but the latter causes a warning:

WARNING: unmet direct dependencies detected for ARM_ERRATA_814220
  Depends on [n]: CPU_V7 [=n]
  Selected by [y]:
  - SOC_IMX7D [=y] && ARCH_MXC [=y] && (ARCH_MULTI_V7 [=n] || ARM_SINGLE_ARMV7M [=y])

Make the select statement conditional.

Fixes: 4562fa4c86c9 ("ARM: imx: Enable ARM_ERRATA_814220 for i.MX6UL and i.MX7D")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Cc: Christian Eggers <ceggers@arri.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: imx: Enable ARM_ERRATA_814220 for i.MX6UL and i.MX7D

commit 4562fa4c86c92a2df635fe0697c9e06379738741 upstream.

ARM_ERRATA_814220 has below description:

The v7 ARM states that all cache and branch predictor maintenance
operations that do not specify an address execute, relative to
each other, in program order.
However, because of this erratum, an L2 set/way cache maintenance
operation can overtake an L1 set/way cache maintenance operation.
This ERRATA only affected the Cortex-A7 and present in r0p2, r0p3,
r0p4, r0p5.

i.MX6UL and i.MX7D have Cortex-A7 r0p5 inside, need to enable
ARM_ERRATA_814220 for proper workaround.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Cc: Christian Eggers <ceggers@arri.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/mlx5: Replace tunnel mpls capability bits for tunnel_offloads

commit 41e684ef3f37ce6e5eac3fb5b9c7c1853f4b0447 upstream.

Until now the flex parser capability was used in ib_query_device() to
indicate tunnel_offloads_caps support for mpls_over_gre/mpls_over_udp.

Newer devices and firmware will have configurations with the flexparser
but without mpls support.

Testing for the flex parser capability was a mistake, the tunnel_stateless
capability was intended for detecting mpls and was introduced at the same
time as the flex parser capability.

Otherwise userspace will be incorrectly informed that a future device
supports MPLS when it does not.

Link: https://lore.kernel.org/r/20200305123841.196086-1-leon@kernel.org
Cc: <stable@vger.kernel.org> # 4.17
Fixes: e818e255a58d ("IB/mlx5: Expose MPLS related tunneling offloads")
Signed-off-by: Alex Vesker <valex@mellanox.com>
Reviewed-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/hfi1: Fix memory leaks in sysfs registration and unregistration

commit 5c15abc4328ad696fa61e2f3604918ed0c207755 upstream.

When the hfi1 driver is unloaded, kmemleak will report the following
issue:

unreferenced object 0xffff8888461a4c08 (size 8):
comm "kworker/0:0", pid 5, jiffies 4298601264 (age 2047.134s)
hex dump (first 8 bytes):
73 64 6d 61 30 00 ff ff sdma0...
backtrace:
[<00000000311a6ef5>] kvasprintf+0x62/0xd0
[<00000000ade94d9f>] kobject_set_name_vargs+0x1c/0x90
[<0000000060657dbb>] kobject_init_and_add+0x5d/0xb0
[<00000000346fe72b>] 0xffffffffa0c5ecba
[<000000006cfc5819>] 0xffffffffa0c866b9
[<0000000031c65580>] 0xffffffffa0c38e87
[<00000000e9739b3f>] local_pci_probe+0x41/0x80
[<000000006c69911d>] work_for_cpu_fn+0x16/0x20
[<00000000601267b5>] process_one_work+0x171/0x380
[<0000000049a0eefa>] worker_thread+0x1d1/0x3f0
[<00000000909cf2b9>] kthread+0xf8/0x130
[<0000000058f5f874>] ret_from_fork+0x35/0x40

This patch fixes the issue by:

- Releasing dd->per_sdma[i].kobject in hfi1_unregister_sysfs().
  - This will fix the memory leak.

- Calling kobject_put() to unwind operations only for those entries in
   dd->per_sdma[] whose operations have succeeded (including the current
   one that has just failed) in hfi1_verbs_register_sysfs().

Cc: <stable@vger.kernel.org>
Fixes: 0cb2aa690c7e ("IB/hfi1: Add sysfs interface for affinity setup")
Link: https://lore.kernel.org/r/20200326163807.21129.27371.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/hfi1: Call kobject_put() when kobject_init_and_add() fails

commit dfb5394f804ed4fcea1fc925be275a38d66712ab upstream.

When kobject_init_and_add() returns an error in the function
hfi1_create_port_files(), the function kobject_put() is not called for the
corresponding kobject, which potentially leads to memory leak.

This patch fixes the issue by calling kobject_put() even if
kobject_init_and_add() fails.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200326163813.21129.44280.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: jz4740-i2s: Fix divider written at incorrect offset in register

commit 9401d5aa328e64617d87abd59af1c91cace4c3e4 upstream.

The 4-bit divider value was written at offset 8, while the jz4740
programming manual locates it at offset 0.

Fixes: 26b0aad80a86 ("ASoC: jz4740: Add dynamic sampling rate support to jz4740-i2s")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200306222931.39664-2-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: intel_int0002_vgpio: Use acpi_register_wakeup_handler()

commit 767191db8220db29f78c031f4d27375173c336d5 upstream.

The Power Management Events (PMEs) the INT0002 driver listens for get
signalled by the Power Management Controller (PMC) using the same IRQ
as used for the ACPI SCI.

Since commit fdde0ff8590b ("ACPI: PM: s2idle: Prevent spurious SCIs from
waking up the system") the SCI triggering, without there being a wakeup
cause recognized by the ACPI sleep code, will no longer wakeup the system.

This breaks PMEs / wakeups signalled to the INT0002 driver, the system
never leaves the s2idle_loop() now.

Use acpi_register_wakeup_handler() to register a function which checks
the GPE0a_STS register for a PME and trigger a wakeup when a PME has
been signalled.

Fixes: fdde0ff8590b ("ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system")
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: PM: Add acpi_[un]register_wakeup_handler()

commit ddfd9dcf270ce23ed1985b66fcfa163920e2e1b8 upstream.

Since commit fdde0ff8590b ("ACPI: PM: s2idle: Prevent spurious SCIs from
waking up the system") the SCI triggering without there being a wakeup
cause recognized by the ACPI sleep code will no longer wakeup the system.

This works as intended, but this is a problem for devices where the SCI
is shared with another device which is also a wakeup source.

In the past these, from the pov of the ACPI sleep code, spurious SCIs
would still cause a wakeup so the wakeup from the device sharing the
interrupt would actually wakeup the system. This now no longer works.

This is a problem on e.g. Bay Trail-T and Cherry Trail devices where
some peripherals (typically the XHCI controller) can signal a
Power Management Event (PME) to the Power Management Controller (PMC)
to wakeup the system, this uses the same interrupt as the SCI.
These wakeups are handled through a special INT0002 ACPI device which
checks for events in the GPE0a_STS for this and takes care of acking
the PME so that the shared interrupt stops triggering.

The change to the ACPI sleep code to ignore the spurious SCI, causes
the system to no longer wakeup on these PME events. To make things
worse this means that the INT0002 device driver interrupt handler will
no longer run, causing the PME to not get cleared and resulting in the
system hanging. Trying to wakeup the system after such a PME through e.g.
the power button no longer works.

Add an acpi_register_wakeup_handler() function which registers
a handler to be called from acpi_s2idle_wake() and when the handler
returns true, return true from acpi_s2idle_wake().

The INT0002 driver will use this mechanism to check the GPE0a_STS
register from acpi_s2idle_wake() and to tell the system to wakeup
if a PME is signaled in the register.

Fixes: fdde0ff8590b ("ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system")
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwrng: imx-rngc - fix an error path

commit 47a1f8e8b3637ff5f7806587883d7d94068d9ee8 upstream.

Make sure that the rngc interrupt is masked if the rngc self test fails.
Self test failure means that probe fails as well. Interrupts should be
masked in this case, regardless of the error.

Cc: stable@vger.kernel.org
Fixes: 1d5449445bd0 ("hwrng: mx-rngc - add a driver for Freescale RNGC")
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools/accounting/getdelays.c: fix netlink attribute length

commit 4054ab64e29bb05b3dfe758fff3c38a74ba753bb upstream.

A recent change to the netlink code: 6e237d099fac ("netlink: Relax attr
validation for fixed length types") logs a warning when programs send
messages with invalid attributes (e.g., wrong length for a u32). Yafang
reported this error message for tools/accounting/getdelays.c.

send_cmd() is wrongly adding 1 to the attribute length. As noted in
include/uapi/linux/netlink.h nla_len should be NLA_HDRLEN + payload
length, so drop the +1.

Fixes: 9e06d3f9f6b1 ("per task delay accounting taskstats interface: documentation fix")
Reported-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Yafang Shao <laoar.shao@gmail.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200327173111.63922-1-dsahern@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

slub: improve bit diffusion for freelist ptr obfuscation

commit 1ad53d9fa3f6168ebcf48a50e08b170432da2257 upstream.

Under CONFIG_SLAB_FREELIST_HARDENED=y, the obfuscation was relatively weak
in that the ptr and ptr address were usually so close that the first XOR
would result in an almost entirely 0-byte value[1], leaving most of the
"secret" number ultimately being stored after the third XOR.  A single
blind memory content exposure of the freelist was generally sufficient to
learn the secret.

Add a swab() call to mix bits a little more.  This is a cheap way (1
cycle) to make attacks need more than a single exposure to learn the
secret (or to know _where_ the exposure is in memory).

kmalloc-32 freelist walk, before:

ptr              ptr_addr            stored value      secret
ffff90c22e019020@ffff90c22e019000 is 86528eb656b3b5bd (86528eb656b3b59d)
ffff90c22e019040@ffff90c22e019020 is 86528eb656b3b5fd (86528eb656b3b59d)
ffff90c22e019060@ffff90c22e019040 is 86528eb656b3b5bd (86528eb656b3b59d)
ffff90c22e019080@ffff90c22e019060 is 86528eb656b3b57d (86528eb656b3b59d)
ffff90c22e0190a0@ffff90c22e019080 is 86528eb656b3b5bd (86528eb656b3b59d)
...

after:

ptr              ptr_addr            stored value      secret
ffff9eed6e019020@ffff9eed6e019000 is 793d1135d52cda42 (86528eb656b3b59d)
ffff9eed6e019040@ffff9eed6e019020 is 593d1135d52cda22 (86528eb656b3b59d)
ffff9eed6e019060@ffff9eed6e019040 is 393d1135d52cda02 (86528eb656b3b59d)
ffff9eed6e019080@ffff9eed6e019060 is 193d1135d52cdae2 (86528eb656b3b59d)
ffff9eed6e0190a0@ffff9eed6e019080 is f93d1135d52cdac2 (86528eb656b3b59d)

[1] https://blog.infosectcbr.com.au/2020/03/weaknesses-in-linux-kernel-heap.html

Fixes: 2482ddec670f ("mm: add SLUB free list pointer obfuscation")
Reported-by: Silvio Cesare <silvio.cesare@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/202003051623.AF4F8CB@keescook
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

uapi: rename ext2_swab() to swab() and share globally in swab.h

commit d5767057c9a76a29f073dad66b7fa12a90e8c748 upstream.

ext2_swab() is defined locally in lib/find_bit.c However it is not
specific to ext2, neither to bitmaps.

There are many potential users of it, so rename it to just swab() and
move to include/uapi/linux/swab.h

ABI guarantees that size of unsigned long corresponds to BITS_PER_LONG,
therefore drop unneeded cast.

Link: http://lkml.kernel.org/r/20200103202846.21616-1-yury.norov@gmail.com
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Joe Perches <joe@perches.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: gadget: Wrap around when skip TRBs

commit 2dedea035ae82c5af0595637a6eda4655532b21e upstream.

When skipping TRBs, we need to account for wrapping around the ring
buffer and not modifying some invalid TRBs. Without this fix, dwc3 won't
be able to check for available TRBs.

Cc: stable <stable@vger.kernel.org>
Fixes: 7746a8dfb3f9 ("usb: dwc3: gadget: extract dwc3_gadget_ep_skip_trbs()")
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>