review.tizen.org Git - platform/kernel/linux-rpi.git/log

xfrm: Don't accidentally set RTO_ONLINK in decode_session4()

commit 23e7b1bfed61e301853b5e35472820d919498278 upstream.

Similar to commit 94e2238969e8 ("xfrm4: strip ECN bits from tos field"),
clear the ECN bits from iph->tos when setting ->flowi4_tos.
This ensures that the last bit of ->flowi4_tos is cleared, so
ip_route_output_key_hash() isn't going to restrict the scope of the
route lookup.

Use ~INET_ECN_MASK instead of IPTOS_RT_MASK, because we have no reason
to clear the high order bits.

Found by code inspection, compile tested only.

Fixes: 4da3089f2b58 ("[IPSEC]: Use TOS when doing tunnel lookups")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: fix Bz NMI behaviour

commit fdfde0cb79264f88992e72b5a056a3a3284fcaad upstream.

Contrary to what was stated before, the hardware hasn't changed
the bits here yet. In any case, the new CSR is also directly
(lower 16 bits) connected to UREG_DOORBELL_TO_ISR6, so if it
still changes the changes would be there. Adjust the code and
comments accordingly.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: 6c0795f1a524 ("iwlwifi: implement Bz NMI behaviour")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211210090244.75b6207536e3.I7d170a48a9096e6b7269c3a9f447c326f929b171@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netns: add schedule point in ops_exit_list()

commit 2836615aa22de55b8fca5e32fe1b27a67cda625e upstream.

When under stress, cleanup_net() can have to dismantle
netns in big numbers. ops_exit_list() currently calls
many helpers [1] that have no schedule point, and we can
end up with soft lockups, particularly on hosts
with many cpus.

Even for moderate amount of netns processed by cleanup_net()
this patch avoids latency spikes.

[1] Some of these helpers like fib_sync_up() and fib_sync_down_dev()
are very slow because net/ipv4/fib_semantics.c uses host-wide hash tables,
and ifindex is used as the only input of two hash functions.
ifindexes tend to be the same for all netns (lo.ifindex==1 per instance)
This will be fixed in a separate patch.

Fixes: 72ad937abd0a ("net: Add support for batching network namespace cleanups")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

inet: frags: annotate races around fqdir->dead and fqdir->high_thresh

commit 91341fa0003befd097e190ec2a4bf63ad957c49a upstream.

Both fields can be read/written without synchronization,
add proper accessors and documentation.

Fixes: d5dd88794a13 ("inet: fix various use-after-free in defrags units")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

taskstats: Cleanup the use of task->exit_code

commit 1b5a42d9c85f0e731f01c8d1129001fd8531a8a0 upstream.

In the function bacct_add_task the code reading task->exit_code was
introduced in commit f3cef7a99469 ("[PATCH] csa: basic accounting over
taskstats"), and it is not entirely clear what the taskstats interface
is trying to return as only returning the exit_code of the first task
in a process doesn't make a lot of sense.

As best as I can figure the intent is to return task->exit_code after
a task exits.  The field is returned with per task fields, so the
exit_code of the entire process is not wanted.  Only the value of the
first task is returned so this is not a useful way to get the per task
ptrace stop code.  The ordinary case of returning this value is
returning after a task exits, which also precludes use for getting
a ptrace value.

It is common to for the first task of a process to also be the last
task of a process so this field may have done something reasonable by
accident in testing.

Make ac_exitcode a reliable per task value by always returning it for
every exited task.

Setting ac_exitcode in a sensible mannter makes it possible to continue
to provide this value going forward.

Cc: Balbir Singh <bsingharora@gmail.com>
Fixes: f3cef7a99469 ("[PATCH] csa: basic accounting over taskstats")
Link: https://lkml.kernel.org/r/20220103213312.9144-5-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virtio_ring: mark ring unused on error

commit 1861ba626ae9b98136f3e504208cdef6b29cd3ec upstream.

A recently added error path does not mark ring unused when exiting on
OOM, which will lead to BUG on the next entry in debug builds.

TODO: refactor code so we have START_USE and END_USE in the same function.

Fixes: fc6d70f40b3d ("virtio_ring: check desc == NULL when using indirect with packed")
Cc: "Xuan Zhuo" <xuanzhuo@linux.alibaba.com>
Cc: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vdpa/mlx5: Fix wrong configuration of virtio_version_1_0

commit 97143b70aa847f2b0a1f959dde126b76ff7b5376 upstream.

Remove overriding of virtio_version_1_0 which forced the virtqueue
object to version 1.

Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20211230142024.142979-1-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: pxa: fix null pointer dereference

commit 34127b3632b21e5c391756e724b1198eb9917981 upstream.

With the latest stable kernel versions the rtc on the PXA based
Zaurus does not work, when booting I see the following kernel messages:

pxa-rtc pxa-rtc: failed to find rtc clock source
pxa-rtc pxa-rtc: Unable to init SA1100 RTC sub-device
pxa-rtc: probe of pxa-rtc failed with error -2
hctosys: unable to open rtc device (rtc0)

I think this is because commit f2997775b111 ("rtc: sa1100: fix possible
race condition") moved the allocation of the rtc_device struct out of
sa1100_rtc_init and into sa1100_rtc_probe. This means that pxa_rtc_probe
also needs to do allocation for the rtc_device struct, otherwise
sa1100_rtc_init will try to dereference a null pointer. This patch adds
that allocation by copying how sa1100_rtc_probe in
drivers/rtc/rtc-sa1100.c does it; after the IRQs are set up a managed
rtc_device is allocated.

I've tested this patch with `qemu-system-arm -machine akita` and with a
real Zaurus SL-C1000 applied to 4.19, 5.4, and 5.10.

Signed-off-by: Laurence de Bruxelles <lfdebrux@gmail.com>
Fixes: f2997775b111 ("rtc: sa1100: fix possible race condition")
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220101154149.12026-1-lfdebrux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: vivaldi: fix handling devices not using numbered reports

commit 3fe6acd4dc922237b30e55473c9349c6ce0690f3 upstream.

Unfortunately details of USB HID transport bled into HID core and
handling of numbered/unnumbered reports is quite a mess, with
hid_report_len() calculating the length according to USB rules,
and hid_hw_raw_request() adding report ID to the buffer for both
numbered and unnumbered reports.

Untangling it all requres a lot of changes in HID, so for now let's
handle this in the driver.

[jkosina@suse.cz: microoptimize field->report->id to report->id]
Fixes: 14c9c014babe ("HID: add vivaldi HID driver")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Stephen Boyd <swboyd@chromium.org> # CoachZ
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

um: gitignore: Add kernel/capflags.c

commit 4b86366fdfbedec42f8f7ee037775f2839921d34 upstream.

This file is generated, we should ignore it.

Fixes: d8fb32f4790f ("um: Add support for host CPU flags and alignment")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: anton.ivanov@cambridgegreys.com
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bitops: protect find_first_{,zero}_bit properly

commit b7ec62d7ee0f0b8af6ba190501dff7f9ee6545ca upstream.

find_first_bit() and find_first_zero_bit() are not protected with
ifdefs as other functions in find.h. It causes build errors on some
platforms if CONFIG_GENERIC_FIND_FIRST_BIT is enabled.

Signed-off-by: Yury Norov <yury.norov@gmail.com>
Fixes: 2cc7b6a44ac2 ("lib: add fast path for find_first_*_bit() and find_last_bit()")
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: axienet: increase default TX ring size to 128

commit 2d19c3fd80178160dd505ccd7fed1643831227a5 upstream.

With previous changes to make the driver handle the TX ring size more
correctly, the default TX ring size of 64 appears to significantly
bottleneck TX performance to around 600 Mbps on a 1 Gbps link on ZynqMP.
Increasing this to 128 seems to bring performance up to near line rate and
shouldn't cause excess bufferbloat (this driver doesn't yet support modern
byte-based queue management).

Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: axienet: fix for TX busy handling

commit bb193e3db8b86a63f26889c99e14fd30c9ebd72a upstream.

Network driver documentation indicates we should be avoiding returning
NETDEV_TX_BUSY from ndo_start_xmit in normal cases, since it requires
the packets to be requeued. Instead the queue should be stopped after
a packet is added to the TX ring when there may not be enough room for an
additional one. Also, when TX ring entries are completed, we should only
wake the queue if we know there is room for another full maximally
fragmented packet.

Print a warning if there is insufficient space at the start of start_xmit,
since this should no longer happen.

Combined with increasing the default TX ring size (in a subsequent
patch), this appears to recover the TX performance lost by previous changes
to actually manage the TX ring state properly.

Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: axienet: fix number of TX ring slots for available check

commit aba57a823d2985a2cc8c74a2535f3a88e68d9424 upstream.

The check for the number of available TX ring slots was off by 1 since a
slot is required for the skb header as well as each fragment. This could
result in overwriting a TX ring slot that was still in use.

Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: axienet: Fix TX ring slot available check

commit 996defd7f8b5dafc1d480b7585c7c62437f80c3c upstream.

The check for whether a TX ring slot was available was incorrect,
since a slot which had been loaded with transmit data but the device had
not started transmitting would be treated as available, potentially
causing non-transmitted slots to be overwritten. The control field in
the descriptor should be checked, rather than the status field (which may
only be updated when the device completes the entry).

Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: axienet: limit minimum TX ring size

commit 70f5817deddbc6ef3faa35841cab83c280cc653a upstream.

The driver will not work properly if the TX ring size is set to below
MAX_SKB_FRAGS + 1 since it needs to hold at least one full maximally
fragmented packet in the TX ring. Limit setting the ring size to below
this value.

Fixes: 8b09ca823ffb4 ("net: axienet: Make RX/TX ring sizes configurable")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: axienet: add missing memory barriers

commit 95978df6fa328df619c15312e65ece469c2be2d2 upstream.

This driver was missing some required memory barriers:

Use dma_rmb to ensure we see all updates to the descriptor after we see
that an entry has been completed.

Use wmb and rmb to avoid stale descriptor status between the TX path and
TX complete IRQ path.

Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: axienet: reset core on initialization prior to MDIO access

commit 04cc2da39698efd7eb2e30c112538922d26f848e upstream.

In some cases where the Xilinx Ethernet core was used in 1000Base-X or
SGMII modes, which use the internal PCS/PMA PHY, and the MGT
transceiver clock source for the PCS was not running at the time the
FPGA logic was loaded, the core would come up in a state where the
PCS could not be found on the MDIO bus. To fix this, the Ethernet core
(including the PCS) should be reset after enabling the clocks, prior to
attempting to access the PCS using of_mdio_find_device.

Fixes: 1a02556086fc (net: axienet: Properly handle PCS/PMA PHY for 1000BaseX mode)
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: axienet: Wait for PhyRstCmplt after core reset

commit b400c2f4f4c53c86594dd57098970d97d488bfde upstream.

When resetting the device, wait for the PhyRstCmplt bit to be set
in the interrupt status register before continuing initialization, to
ensure that the core is actually ready. When using an external PHY, this
also ensures we do not start trying to access the PHY while it is still
in reset. The PHY reset is initiated by the core reset which is
triggered just above, but remains asserted for 5ms after the core is
reset according to the documentation.

The MgtRdy bit could also be waited for, but unfortunately when using
7-series devices, the bit does not appear to work as documented (it
seems to behave as some sort of link state indication and not just an
indication the transceiver is ready) so it can't really be relied on for
this purpose.

Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: axienet: increase reset timeout

commit 2e5644b1bab2ccea9cfc7a9520af95b94eb0dbf1 upstream.

The previous timeout of 1ms was too short to handle some cases where the
core is reset just after the input clocks were started, which will
be introduced in an upcoming patch. Increase the timeout to 50ms. Also
simplify the reset timeout checking to use read_poll_timeout.

Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/smc: Fix hung_task when removing SMC-R devices

commit 56d99e81ecbc997a5f984684d0eeb583992b2072 upstream.

A hung_task is observed when removing SMC-R devices. Suppose that
a link group has two active links(lnk_A, lnk_B) associated with two
different SMC-R devices(dev_A, dev_B). When dev_A is removed, the
link group will be removed from smc_lgr_list and added into
lgr_linkdown_list. lnk_A will be cleared and smcibdev(A)->lnk_cnt
will reach to zero. However, when dev_B is removed then, the link
group can't be found in smc_lgr_list and lnk_B won't be cleared,
making smcibdev->lnk_cnt never reaches zero, which causes a hung_task.

This patch fixes this issue by restoring the implementation of
smc_smcr_terminate_all() to what it was before commit 349d43127dac
("net/smc: fix kernel panic caused by race of smc_sock"). The original
implementation also satisfies the intention that make sure QP destroy
earlier than CQ destroy because we will always wait for smcibdev->lnk_cnt
reaches zero, which guarantees QP has been destroyed.

Fixes: 349d43127dac ("net/smc: fix kernel panic caused by race of smc_sock")
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: idt3243x: Fix IRQ check in idt_gpio_probe

commit 30fee1d7462a446ade399c0819717a830cbdca69 upstream.

platform_get_irq() returns negative error number instead 0 on failure.
And the doc of platform_get_irq() provides a usage example:

    int irq = platform_get_irq(pdev, 0);
    if (irq < 0)
        return irq;

Fix the check of return value to catch errors correctly.

Fixes: 4195926aedca ("gpio: Add support for IDT 79RC3243x GPIO controller")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: mpc8xxx: Fix IRQ check in mpc8xxx_probe

commit 0b39536cc699db6850c426db7f9cb45923de40c5 upstream.

platform_get_irq() returns negative error number instead 0 on failure.
And the doc of platform_get_irq() provides a usage example:

    int irq = platform_get_irq(pdev, 0);
    if (irq < 0)
        return irq;

Fix the check of return value to catch errors correctly.

Fixes: 76c47d1449fc ("gpio: mpc8xxx: Add ACPI support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl/rockchip: fix gpio device creation

commit bceb6732f3fd2a55d8f2e518cced1c7555e216b6 upstream.

GPIO nodes are not themselves busses, so passing rockchip_bank_match
here is wrong. Passing NULL instead uses the standard bus match table
which is more appropriate.

devm_of_platform_populate() shows that this is the normal way to call
of_platform_populate() from a device driver, so in order to match that
more closely also add the pinctrl device as the parent for the newly
created GPIO controllers.

Specifically, using the wrong match here can break dynamic GPIO hogs as
marking the GPIO bank as a bus means that of_platform_notify() will set
OF_POPULATED on new child nodes and if this happens before
of_gpio_notify() is called then the new hog will be skipped as
OF_POPULATED is already set.

Fixes: 9ce9a02039de ("pinctrl/rockchip: drop the gpio related codes")
Signed-off-by: John Keeping <john@metanate.com>
Link: https://lore.kernel.org/r/20211126151352.1509583-1-john@metanate.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: si5341: Fix clock HW provider cleanup

commit 49a8f2bc8d88702783c7e163ec84374e9a022f71 upstream.

The call to of_clk_add_hw_provider was not undone on remove or on probe
failure, which could cause an oops on a subsequent attempt to retrieve
clocks for the removed device. Switch to the devm version of the
function to avoid this issue.

Fixes: 3044a860fd09 ("clk: Add Si5341/Si5340 driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20220112203816.1784610-1-robert.hancock@calian.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: Emit a stern warning with writable debugfs enabled

commit 489a71964f9d74e697a12cd0ace20ed829eb1f93 upstream.

We don't want vendors to be enabling this part of the clk code and
shipping it to customers. Exposing the ability to change clk frequencies
and parents via debugfs is potentially damaging to the system if folks
don't know what they're doing. Emit a strong warning so that the message
is clear: don't enable this outside of development systems.

Fixes: 37215da5553e ("clk: Add support for setting clk_rate via debugfs")
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20211210014237.2130300-1-sboyd@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

af_unix: annote lockless accesses to unix_tot_inflight & gc_in_progress

commit 9d6d7f1cb67cdee15f1a0e85aacfb924e0e02435 upstream.

wait_for_unix_gc() reads unix_tot_inflight & gc_in_progress
without synchronization.

Adds READ_ONCE()/WRITE_ONCE() and their associated comments
to better document the intent.

BUG: KCSAN: data-race in unix_inflight / wait_for_unix_gc

write to 0xffffffff86e2b7c0 of 4 bytes by task 9380 on cpu 0:
unix_inflight+0x1e8/0x260 net/unix/scm.c:63
unix_attach_fds+0x10c/0x1e0 net/unix/scm.c:121
unix_scm_to_skb net/unix/af_unix.c:1674 [inline]
unix_dgram_sendmsg+0x679/0x16b0 net/unix/af_unix.c:1817
unix_seqpacket_sendmsg+0xcc/0x110 net/unix/af_unix.c:2258
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg net/socket.c:724 [inline]
____sys_sendmsg+0x39a/0x510 net/socket.c:2409
___sys_sendmsg net/socket.c:2463 [inline]
__sys_sendmmsg+0x267/0x4c0 net/socket.c:2549
__do_sys_sendmmsg net/socket.c:2578 [inline]
__se_sys_sendmmsg net/socket.c:2575 [inline]
__x64_sys_sendmmsg+0x53/0x60 net/socket.c:2575
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffffffff86e2b7c0 of 4 bytes by task 9375 on cpu 1:
wait_for_unix_gc+0x24/0x160 net/unix/garbage.c:196
unix_dgram_sendmsg+0x8e/0x16b0 net/unix/af_unix.c:1772
unix_seqpacket_sendmsg+0xcc/0x110 net/unix/af_unix.c:2258
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg net/socket.c:724 [inline]
____sys_sendmsg+0x39a/0x510 net/socket.c:2409
___sys_sendmsg net/socket.c:2463 [inline]
__sys_sendmmsg+0x267/0x4c0 net/socket.c:2549
__do_sys_sendmmsg net/socket.c:2578 [inline]
__se_sys_sendmmsg net/socket.c:2575 [inline]
__x64_sys_sendmmsg+0x53/0x60 net/socket.c:2575
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0x00000002 -> 0x00000004

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 9375 Comm: syz-executor.1 Not tainted 5.16.0-rc7-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 9915672d4127 ("af_unix: limit unix_tot_inflight")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20220114164328.2038499-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: octeontx2 - uninitialized variable in kvf_limits_store()

commit 0ea275df84c389e910a3575a9233075118c173ee upstream.

If kstrtoint() fails then "lfs_num" is uninitialized and the warning
doesn't make any sense. Just delete it.

Fixes: 8ec8015a3168 ("crypto: octeontx2 - add support to process the crypto request")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: fix to check available space of CP area correctly in update_ckpt_flags()

commit b702c83e2eaa2fa2d72e957c55c0321535cc8b9f upstream.

Otherwise, nat_bit area may be persisted across boundary of CP area during
nat_bit rebuilding.

Fixes: 94c821fb286b ("f2fs: rebuild nat_bits during umount")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: fix to reserve space for IO align feature

commit 300a842937fbcfb5a189cea9ba15374fdb0b5c6b upstream.

https://bugzilla.kernel.org/show_bug.cgi?id=204137

With below script, we will hit panic during new segment allocation:

DISK=bingo.img
MOUNT_DIR=/mnt/f2fs

dd if=/dev/zero of=$DISK bs=1M count=105
mkfs.f2fe -a 1 -o 19 -t 1 -z 1 -f -q $DISK

mount -t f2fs $DISK $MOUNT_DIR -o "noinline_dentry,flush_merge,noextent_cache,mode=lfs,io_bits=7,fsync_mode=strict"

for (( i = 0; i < 4096; i++ )); do
name=`head /dev/urandom | tr -dc A-Za-z0-9 | head -c 10`
mkdir $MOUNT_DIR/$name
done

umount $MOUNT_DIR
rm $DISK

f2fs: compress: fix potential deadlock of compress file

commit 7377e853967ba45bf409e3b5536624d2cbc99f21 upstream.

There is a potential deadlock between writeback process and a process
performing write_begin() or write_cache_pages() while trying to write
same compress file, but not compressable, as below:

[Process A] - doing checkpoint
[Process B]                     [Process C]
f2fs_write_cache_pages()
- lock_page() [all pages in cluster, 0-31]
- f2fs_write_multi_pages()
- f2fs_write_raw_pages()
  - f2fs_write_single_data_page()
   - f2fs_do_write_data_page()
     - return -EAGAIN [f2fs_trylock_op() failed]
   - unlock_page(page) [e.g., page 0]
                                - generic_perform_write()
                                 - f2fs_write_begin()
                                  - f2fs_prepare_compress_overwrite()
                                   - prepare_compress_overwrite()
                                    - lock_page() [e.g., page 0]
                                    - lock_page() [e.g., page 1]
   - lock_page(page) [e.g., page 0]

Since there is no compress process, it is no longer necessary to hold
locks on every pages in cluster within f2fs_write_raw_pages().

This patch changes f2fs_write_raw_pages() to release all locks first
and then perform write same as the non-compress file in
f2fs_write_cache_pages().

Fixes: 4c8ff7095bef ("f2fs: support data compression")
Signed-off-by: Hyeong-Jun Kim <hj514.kim@samsung.com>
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Youngjin Gil <youngjin.gil@samsung.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: fix to avoid panic in is_alive() if metadata is inconsistent

commit f6db43076d190d9bf75559dec28e18b9d12e4ce5 upstream.

As report by Wenqing Liu in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=215231

If we enable CONFIG_F2FS_CHECK_FS config, and with fuzzed image attached
in above link, we will encounter panic when executing below script:

1. mkdir mnt
2. mount -t f2fs tmp1.img mnt
3. touch tmp

F2FS-fs (loop11): mismatched blkaddr 5765 (source_blkaddr 1) in seg 3
kernel BUG at fs/f2fs/gc.c:1042!
do_garbage_collect+0x90f/0xa80 [f2fs]
f2fs_gc+0x294/0x12a0 [f2fs]
f2fs_balance_fs+0x2c5/0x7d0 [f2fs]
f2fs_create+0x239/0xd90 [f2fs]
lookup_open+0x45e/0xa90
open_last_lookups+0x203/0x670
path_openat+0xae/0x490
do_filp_open+0xbc/0x160
do_sys_openat2+0x2f1/0x500
do_sys_open+0x5e/0xa0
__x64_sys_openat+0x28/0x40

Previously, f2fs tries to catch data inconcistency exception in between
SSA and SIT table during GC, however once the exception is caught, it will
call f2fs_bug_on to hang kernel, it's not needed, instead, let's set
SBI_NEED_FSCK flag and skip migrating current block.

Fixes: bbf9f7d90f21 ("f2fs: Fix indefinite loop in f2fs_gc()")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: fix remove page failed in invalidate compress pages

commit d1917865a7906baf6b687e15e8e6195a295a3992 upstream.

Since compress inode not a regular file, generic_error_remove_page in
f2fs_invalidate_compress_pages will always be failed, set compress
inode as a regular file to fix it.

Fixes: 6ce19aff0b8c ("f2fs: compress: add compress_inode to cache compressed blocks")
Signed-off-by: Fengnan Chang <changfengnan@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vmwgfx: Remove unused compile options

commit 50ca8cc7c0fdd9ab16b8b66ffb301fface101fac upstream.

Before the driver had screen targets support we had to disable explicit
bringup of its infrastructure because it was breaking screen objects
support.
Since the implementation of screen targets landed there hasn't been a
reason to explicitly disable it and the options were never used.
Remove of all that unused code.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: d80efd5cb3de ("drm/vmwgfx: Initial DX support")
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211215184147.3688785-3-zack@kde.org
(cherry picked from commit 11343099d5ae6c7411da1425b6b162c89fb5bf10)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vmwgfx: Remove explicit transparent hugepages support

commit bc701a28c74e78d7b5aa2b8628cb3608d4785d14 upstream.

Old versions of the svga device used to export virtual vram, handling of
which was optimized on top of transparent hugepages support. Only very
old devices (OpenGL 2.1 support and earlier) used this code and at this
point performance differences are negligible.

Because the code requires very old hardware versions to run it has
been largely untested and unused for a long time.

Furthermore removal of the ttm hugepages support in:
commit 0d979509539e ("drm/ttm: remove ttm_bo_vm_insert_huge()")
broke the coherency mode in vmwgfx when running with hugepages.

Fixes: 0d979509539e ("drm/ttm: remove ttm_bo_vm_insert_huge()")
Signed-off-by: Zack Rusin <zackr@vmware.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211215184147.3688785-2-zack@kde.org
(cherry picked from commit 49d535d64d52945e2c874f380705675e20a02b6a)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: dts: microchip: mpfs: Drop empty chosen node

commit 53ef07326ad0d6ae7fefded22bc53b427d542761 upstream.

It does not make sense to have an (empty) chosen node in an SoC-specific
.dtsi, as chosen is meant for system-specific configuration.
It is already provided in microchip-mpfs-icicle-kit.dts anyway.

Fixes: 0fa6107eca4186ad ("RISC-V: Initial DTS for Microchip ICICLE board")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: pdc_stable: Fix memory leak in pdcs_register_pathentries

commit d24846a4246b6e61ecbd036880a4adf61681d241 upstream.

kobject_init_and_add() takes reference even when it fails.
According to the doc of kobject_init_and_add()：

If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object.

Fix memory leak by calling kobject_put().

Fixes: 73f368cf679b ("Kobject: change drivers/parisc/pdc_stable.c to use kobject_init_and_add")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/fsl: xgmac_mdio: Fix incorrect iounmap when removing module

commit 3f7c239c7844d2044ed399399d97a5f1c6008e1b upstream.

As reported by sparse: In the remove path, the driver would attempt to
unmap its own priv pointer - instead of the io memory that it mapped
in probe.

Fixes: 9f35a7342cff ("net/fsl: introduce Freescale 10G MDIO driver")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/fsl: xgmac_mdio: Add workaround for erratum A-009885

commit 6198c722019774d38018457a8bfb9ba3ed8c931e upstream.

Once an MDIO read transaction is initiated, we must read back the data
register within 16 MDC cycles after the transaction completes. Outside
of this window, reads may return corrupt data.

Therefore, disable local interrupts in the critical section, to
maximize the probability that we can satisfy this requirement.

Fixes: d55ad2967d89 ("powerpc/mpc85xx: Create dts components for the FSL QorIQ DPAA FMan")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mlx5: Don't accidentally set RTO_ONLINK before mlx5e_route_lookup_ipv4_get()

commit 48d67543e01d73292e0bb66d3f10fc422e79e031 upstream.

Mask the ECN bits before calling mlx5e_route_lookup_ipv4_get(). The
tunnel key might have the last ECN bit set. This interferes with the
route lookup process as ip_route_output_key_hash() interpretes this bit
specially (to restrict the route scope).

Found by code inspection, compile tested only.

Fixes: c7b9038d8af6 ("net/mlx5e: TC preparation refactoring for routing update event")
Fixes: 9a941117fb76 ("net/mlx5e: Maximize ip tunnel key usage on the TC offloading path")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: avoid quadratic behavior in netns dismantle

commit d07418afea8f1d9896aaf9dc5ae47ac4f45b220c upstream.

net/ipv4/fib_semantics.c uses an hash table of 256 slots,
keyed by device ifindexes: fib_info_devhash[DEVINDEX_HASHSIZE]

Problem is that with network namespaces, devices tend
to use the same ifindex.

lo device for instance has a fixed ifindex of one,
for all network namespaces.

This means that hosts with thousands of netns spend
a lot of time looking at some hash buckets with thousands
of elements, notably at netns dismantle.

Simply add a per netns perturbation (net_hash_mix())
to spread elements more uniformely.

Also change fib_devindex_hashfn() to use more entropy.

Fixes: aa79e66eee5d ("net: Make ifindex generation per-net namespace")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: update fib_info_cnt under spinlock protection

commit 0a6e6b3c7db6c34e3d149f09cd714972f8753e3f upstream.

In the past, free_fib_info() was supposed to be called
under RTNL protection.

This eventually was no longer the case.

Instead of enforcing RTNL it seems we simply can
move fib_info_cnt changes to occur when fib_info_lock
is held.

v2: David Laight suggested to update fib_info_cnt
only when an entry is added/deleted to/from the hash table,
as fib_info_cnt is used to make sure hash table size
is optimal.

BUG: KCSAN: data-race in fib_create_info / free_fib_info

write to 0xffffffff86e243a0 of 4 bytes by task 26429 on cpu 0:
fib_create_info+0xe78/0x3440 net/ipv4/fib_semantics.c:1428
fib_table_insert+0x148/0x10c0 net/ipv4/fib_trie.c:1224
fib_magic+0x195/0x1e0 net/ipv4/fib_frontend.c:1087
fib_add_ifaddr+0xd0/0x2e0 net/ipv4/fib_frontend.c:1109
fib_netdev_event+0x178/0x510 net/ipv4/fib_frontend.c:1466
notifier_call_chain kernel/notifier.c:83 [inline]
raw_notifier_call_chain+0x53/0xb0 kernel/notifier.c:391
__dev_notify_flags+0x1d3/0x3b0
dev_change_flags+0xa2/0xc0 net/core/dev.c:8872
do_setlink+0x810/0x2410 net/core/rtnetlink.c:2719
rtnl_group_changelink net/core/rtnetlink.c:3242 [inline]
__rtnl_newlink net/core/rtnetlink.c:3396 [inline]
rtnl_newlink+0xb10/0x13b0 net/core/rtnetlink.c:3506
rtnetlink_rcv_msg+0x745/0x7e0 net/core/rtnetlink.c:5571
netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2496
rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5589
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x5fc/0x6c0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x726/0x840 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg net/socket.c:724 [inline]
____sys_sendmsg+0x39a/0x510 net/socket.c:2409
___sys_sendmsg net/socket.c:2463 [inline]
__sys_sendmsg+0x195/0x230 net/socket.c:2492
__do_sys_sendmsg net/socket.c:2501 [inline]
__se_sys_sendmsg net/socket.c:2499 [inline]
__x64_sys_sendmsg+0x42/0x50 net/socket.c:2499
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffffffff86e243a0 of 4 bytes by task 31505 on cpu 1:
free_fib_info+0x35/0x80 net/ipv4/fib_semantics.c:252
fib_info_put include/net/ip_fib.h:575 [inline]
nsim_fib4_rt_destroy drivers/net/netdevsim/fib.c:294 [inline]
nsim_fib4_rt_replace drivers/net/netdevsim/fib.c:403 [inline]
nsim_fib4_rt_insert drivers/net/netdevsim/fib.c:431 [inline]
nsim_fib4_event drivers/net/netdevsim/fib.c:461 [inline]
nsim_fib_event drivers/net/netdevsim/fib.c:881 [inline]
nsim_fib_event_work+0x15ca/0x2cf0 drivers/net/netdevsim/fib.c:1477
process_one_work+0x3fc/0x980 kernel/workqueue.c:2298
process_scheduled_works kernel/workqueue.c:2361 [inline]
worker_thread+0x7df/0xa70 kernel/workqueue.c:2447
kthread+0x2c7/0x2e0 kernel/kthread.c:327
ret_from_fork+0x1f/0x30

value changed: 0x00000d2d -> 0x00000d2e

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 31505 Comm: kworker/1:21 Not tainted 5.16.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events nsim_fib_event_work

Fixes: 48bb9eb47b27 ("netdevsim: fib: Add dummy implementation for FIB offload")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Ido Schimmel <idosch@mellanox.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf evsel: Override attr->sample_period for non-libpfm4 events

commit 3606c0e1a1050d397ad759a62607e419fd8b0ccb upstream.

A previous patch preventing "attr->sample_period" values from being
overridden in pfm events changed a related behaviour in arm-spe.

Before said patch:

perf record -c 10000 -e arm_spe_0// -- sleep 1

Would yield an SPE event with period=10000. After the patch, the period
in "-c 10000" was being ignored because the arm-spe code initializes
sample_period to a non-zero value.

This patch restores the previous behaviour for non-libpfm4 events.

Fixes: ae5dcc8abe31 (“perf record: Prevent override of attr->sample_period for libpfm4 events”)
Reported-by: Chase Conklin <chase.conklin@arm.com>
Signed-off-by: German Gomez <german.gomez@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20220118144054.2541-1-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Mark PTR_TO_FUNC register initially with zero offset

commit d400a6cf1c8a57cdf10f35220ead3284320d85ff upstream.

Similar as with other pointer types where we use ldimm64, clear the register
content to zero first, and then populate the PTR_TO_FUNC type and subprogno
number. Currently this is not done, and leads to reuse of stale register
tracking data.

Given for special ldimm64 cases we always clear the register offset, make it
common for all cases, so it won't be forgotten in future.

Fixes: 69c087ba6225 ("bpf: Add bpf_for_each_map_elem() helper")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Fix mount source show for bpffs

commit 1e9d74660d4df625b0889e77018f9e94727ceacd upstream.

We noticed our tc ebpf tools can't start after we upgrade our in-house kernel
version from 4.19 to 5.10. That is because of the behaviour change in bpffs
caused by commit d2935de7e4fd ("vfs: Convert bpf to use the new mount API").

In our tc ebpf tools, we do strict environment check. If the environment is
not matched, we won't allow to start the ebpf progs. One of the check is whether
bpffs is properly mounted. The mount information of bpffs in kernel-4.19 and
kernel-5.10 are as follows:

- kernel 4.19
$ mount -t bpf bpffs /sys/fs/bpf
$ mount -t bpf
bpffs on /sys/fs/bpf type bpf (rw,relatime)

- kernel 5.10
$ mount -t bpf bpffs /sys/fs/bpf
$ mount -t bpf
none on /sys/fs/bpf type bpf (rw,relatime)

The device name in kernel-5.10 is displayed as none instead of bpffs, then our
environment check fails. Currently we modify the tools to adopt to the kernel
behaviour change, but I think we'd better change the kernel code to keep the
behavior consistent.

After this change, the mount information will be displayed the same with the
behavior in kernel-4.19, for example:

$ mount -t bpf bpffs /sys/fs/bpf
$ mount -t bpf
bpffs on /sys/fs/bpf type bpf (rw,relatime)

Fixes: d2935de7e4fd ("vfs: Convert bpf to use the new mount API")
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/bpf/20220108134623.32467-1-laoar.shao@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xdp: check prog type before updating BPF link

commit 382778edc8262b7535f00523e9eb22edba1b9816 upstream.

The bpf_xdp_link_update() function didn't check the program type before
updating the program, which made it possible to install any program type as
an XDP program, which is obviously not good. Syzbot managed to trigger this
by swapping in an LWT program on the XDP hook which would crash in a helper
call.

Fix this by adding a check and bailing out if the types don't match.

Fixes: 026a4c28e1db ("bpf, xdp: Implement LINK_UPDATE for BPF XDP link")
Reported-by: syzbot+983941aa85af6ded1fd9@syzkaller.appspotmail.com
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20220107221115.326171-1-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpftool: Fix indent in option lists in the documentation

commit 986dec18bbf41f50edc2e0aa4ac5ef8e0f64f328 upstream.

Mixed indentation levels in the lists of options in bpftool's
documentation produces some unexpected results. For the "bpftool" man
page, it prints a warning:

    $ make -C bpftool.8
      GEN     bpftool.8
    <stdin>:26: (ERROR/3) Unexpected indentation.

For other pages, there is no warning, but it results in a line break
appearing in the option lists in the generated man pages.

RST paragraphs should have a uniform indentation level. Let's fix it.

Fixes: c07ba629df97 ("tools: bpftool: Update and synchronise option list in doc and help msg")
Fixes: 8cc8c6357c8f ("tools: bpftool: Document and add bash completion for -L, -B options")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211110114632.24537-5-quentin@isovalent.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpftool: Remove inclusion of utilities.mak from Makefiles

commit 48f5aef4c458c19ab337eed8c95a6486cc014aa3 upstream.

Bpftool's Makefile, and the Makefile for its documentation, both include
scripts/utilities.mak, but they use none of the items defined in this
file. Remove the includes.

Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211110114632.24537-3-quentin@isovalent.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vc4: crtc: Copy assigned channel to the CRTC

commit eeb6ab4639590130d25670204ab7b6011333d685 upstream.

Accessing the crtc->state pointer from outside the modesetting context
is not allowed. We thus need to copy whatever we need from the KMS state
to our structure in order to access it.

In VC4, a number of users of that pointers have crept in over the years,
and the previous commits removed them all but the HVS channel a CRTC has
been assigned.

Let's move this channel in struct vc4_crtc at atomic_begin() time, drop
it from our private state structure, and remove our use of crtc->state
from our vblank handler entirely.

Link: https://lore.kernel.org/all/YWgteNaNeaS9uWDe@phenom.ffwll.local/
Link: https://lore.kernel.org/r/20211025141113.702757-4-maxime@cerno.tech
Fixes: 87ebcd42fb7b ("drm/vc4: crtc: Assign output to channel automatically")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vc4: Fix non-blocking commit getting stuck forever

commit 0c250c150c74a90db298bf2a8bcd0a1dabed2e2f upstream.

In some situation, we can end up being stuck on a non-blocking that went
through properly.

The situation that seems to trigger it reliably is to first start a
non-blocking commit, and then right after, and before we had any vblank
interrupt), start a blocking commit.

This will lead to the first commit workqueue to be scheduled, setup the
display, while the second commit is waiting for the first one to be
completed.

The vblank interrupt will then be raised, vc4_crtc_handle_vblank() will
run and will compare the active dlist in the HVS channel to the one
associated with the crtc->state.

However, at that point, the second commit is waiting using
drm_atomic_helper_wait_for_dependencies that occurs after
drm_atomic_helper_swap_state has been called, so crtc->state points to
the second commit state. vc4_crtc_handle_vblank() will compare the two
dlist addresses and since they don't match will ignore the interrupt.

The vblank event will never be reported, and the first and second commit
will wait for the first commit completion until they timeout.

The underlying reason is that it was never safe to do so. Indeed,
accessing the ->state pointer access synchronization is based on
ownership guarantees that can only occur within the functions and hooks
defined as part of the KMS framework, and obviously the irq handler
isn't one of them. The rework to move to generic helpers only uncovered
the underlying issue.

However, since the code path between
drm_atomic_helper_wait_for_dependencies() and
drm_atomic_helper_wait_for_vblanks() is serialised and we can't get two
commits in that path at the same time, we can work around this issue by
setting a variable associated to struct drm_crtc to the dlist we expect,
and then using it from the vc4_crtc_handle_vblank() function.

Since that state is shared with the modesetting path, we also need to
introduce a spinlock to protect the code shared between the interrupt
handler and the modesetting path, protecting only our new variable for
now.

Link: https://lore.kernel.org/all/YWgteNaNeaS9uWDe@phenom.ffwll.local/
Link: https://lore.kernel.org/r/20211025141113.702757-3-maxime@cerno.tech
Fixes: 56d1fe0979dc ("drm/vc4: Make pageflip completion handling more robust.")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vc4: crtc: Drop feed_txp from state

commit a16c66401fd831f70a02d33e9bcaac585637c29f upstream.

Accessing the crtc->state pointer from outside the modesetting context
is not allowed. We thus need to copy whatever we need from the KMS state
to our structure in order to access it.

In VC4, a number of users of that pointers have crept in over the years,
the first one being whether or not the downstream controller of the
pixelvalve is our writeback controller.

Fortunately for us, Since commit 39fcb2808376 ("drm/vc4: txp: Turn the
TXP into a CRTC of its own") this is no longer something that can change
from one commit to the other and is hardcoded.

Let's set this flag in struct vc4_crtc if we happen to be the TXP, and
drop the flag from our private state structure.

Link: https://lore.kernel.org/all/YWgteNaNeaS9uWDe@phenom.ffwll.local/
Link: https://lore.kernel.org/r/20211025141113.702757-2-maxime@cerno.tech
Fixes: 008095e065a8 ("drm/vc4: Add support for the transposer block")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: Fix fsync always failed if once failed

commit 8a7518931baa8ea023700987f3db31cb0a80610b upstream.

We do test with inject error fault base on v4.19, after test some time we found
sync /dev/sda always failed.
[root@localhost] sync /dev/sda
sync: error syncing '/dev/sda': Input/output error

scsi log as follows:
[19069.812296] sd 0:0:0:0: [sda] tag#64 Send: scmd 0x00000000d03a0b6b
[19069.812302] sd 0:0:0:0: [sda] tag#64 CDB: Synchronize Cache(10) 35 00 00 00 00 00 00 00 00 00
[19069.812533] sd 0:0:0:0: [sda] tag#64 Done: SUCCESS Result: hostbyte=DID_OK driverbyte=DRIVER_OK
[19069.812536] sd 0:0:0:0: [sda] tag#64 CDB: Synchronize Cache(10) 35 00 00 00 00 00 00 00 00 00
[19069.812539] sd 0:0:0:0: [sda] tag#64 scsi host busy 1 failed 0
[19069.812542] sd 0:0:0:0: Notifying upper driver of completion (result 0)
[19069.812546] sd 0:0:0:0: [sda] tag#64 sd_done: completed 0 of 0 bytes
[19069.812549] sd 0:0:0:0: [sda] tag#64 0 sectors total, 0 bytes done.
[19069.812564] print_req_error: I/O error, dev sda, sector 0

ftrace log as follows:
rep-306069 [007] .... 19654.923315: block_bio_queue: 8,0 FWS 0 + 0 [rep]
rep-306069 [007] .... 19654.923333: block_getrq: 8,0 FWS 0 + 0 [rep]
kworker/7:1H-250   [007] .... 19654.923352: block_rq_issue: 8,0 FF 0 () 0 + 0 [kworker/7:1H]
<idle>-0     [007] ..s. 19654.923562: block_rq_complete: 8,0 FF () 18446744073709551615 + 0 [0]
<idle>-0     [007] d.s. 19654.923576: block_rq_complete: 8,0 WS () 0 + 0 [-5]

As 8d6996630c03 introduce 'fq->rq_status', this data only update when 'flush_rq'
reference count isn't zero. If flush request once failed and record error code
in 'fq->rq_status'. If there is no chance to update 'fq->rq_status',then do fsync
will always failed.
To address this issue reset 'fq->rq_status' after return error code to upper layer.

Fixes: 8d6996630c03("block: fix null pointer dereference in blk_mq_rq_timed_out()")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20211129012659.1553733-1-yebin10@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: fix async_depth sysfs interface for mq-deadline

commit 46cdc45acb089c811d9a54fd50af33b96e5fae9d upstream.

A previous commit added this feature, but it inadvertently used the wrong
variable to show/store the setting from/to, victimized by copy/paste. Fix
it up so that the async_depth sysfs interface reads and writes from the
right setting.

Fixes: 07757588e507 ("block/mq-deadline: Reserve 25% of scheduler tags for synchronous requests")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215485
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/fsl/dts: Enable WA for erratum A-009885 on fman3l MDIO buses

commit 0d375d610fa96524e2ee2b46830a46a7bfa92a9f upstream.

This block is used in (at least) T1024 and T1040, including their
variants like T1023 etc.

Fixes: d55ad2967d89 ("powerpc/mpc85xx: Create dts components for the FSL QorIQ DPAA FMan")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/cell: Fix clang -Wimplicit-fallthrough warning

commit e89257e28e844f5d1d39081bb901d9f1183a7705 upstream.

Clang warns:

arch/powerpc/platforms/cell/pervasive.c:81:2: error: unannotated fall-through between switch labels
        case SRR1_WAKEEE:
        ^
arch/powerpc/platforms/cell/pervasive.c:81:2: note: insert 'break;' to avoid fall-through
        case SRR1_WAKEEE:
        ^
        break;
1 error generated.

Clang is more pedantic than GCC, which does not warn when failing
through to a case that is just break or return. Clang's version is more
in line with the kernel's own stance in deprecated.rst. Add athe missing
break to silence the warning.

Fixes: 6e83985b0f6e ("powerpc/cbe: Do not process external or decremeter interrupts from sreset")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211207110228.698956-1-anders.roxell@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "net/mlx5: Add retry mechanism to the command entry index allocation"

commit 4f6626b0e140867fd6d5a2e9d4ceaef97f10f46a upstream.

This reverts commit 410bd754cd73c4a2ac3856d9a03d7b08f9c906bf.

The reverted commit had added a retry mechanism to the command entry
index allocation. The previous patch ensures that there is a free
command entry index once the command work handler holds the command
semaphore. Thus the retry mechanism is not needed.

Fixes: 410bd754cd73 ("net/mlx5: Add retry mechanism to the command entry index allocation")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: stm32-mdma: fix STM32_MDMA_CTBR_TSEL_MASK

commit e7f110889a87307fb0fed408a5dee1707796ca04 upstream.

This patch fixes STM32_MDMA_CTBR_TSEL_MASK, which is [5:0], not [7:0].

Fixes: a4ffb13c8946 ("dmaengine: Add STM32 MDMA driver")
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20211220165827.1238097-1-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/rxe: Fix a typo in opcode name

commit 8d1cfb884e881efd69a3be4ef10772c71cb22216 upstream.

There is a redundant ']' in the name of opcode IB_OPCODE_RC_SEND_MIDDLE,
so just fix it.

Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20211218112320.3558770-1-cgxu519@mykernel.net
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/hns: Modify the mapping attribute of doorbell to device

commit 39d5534b1302189c809e90641ffae8cbdc42a8fc upstream.

It is more general for ARM device drivers to use the device attribute to
map PCI BAR spaces.

Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver")
Link: https://lore.kernel.org/r/20211206133652.27476-1-liangwenpeng@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: idxd: fix wq settings post wq disable

commit 0f225705cf6536826318180831e18a74595efc8d upstream.

By the spec, wq size and group association is not changeable unless device
is disabled. Exclude clearing the shadow copy on wq disable/reset. This
allows wq type to be changed after disable to be re-enabled.

Move the size and group association to its own cleanup and only call it
during device disable.

Fixes: 0dcfe41e9a4c ("dmanegine: idxd: cleanup all device related bits after disabling device")
Reported-by: Lucas Van <lucas.van@intel.com>
Tested-by: Lucas Van <lucas.van@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163951291732.2987775.13576571320501115257.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: uniphier-xdmac: Fix type of address variables

commit 105a8c525675bb7d4d64871f9b2edf39460de881 upstream.

The variables src_addr and dst_addr handle DMA addresses, so these should
be declared as dma_addr_t.

Fixes: 667b9251440b ("dmaengine: uniphier-xdmac: Add UniPhier external DMA controller driver")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/1639456963-10232-1-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/cma: Remove open coding of overflow checking for private_data_len

commit 8d0d2b0f41b1b2add8a30dbd816051a964efa497 upstream.

The existing tests are a little hard to comprehend. Use
check_add_overflow() instead.

Fixes: 04ded1672402 ("RDMA/cma: Verify private data length")
Link: https://lore.kernel.org/r/1637661978-18770-1-git-send-email-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: ufs: ufs-mediatek: Fix error checking in ufs_mtk_init_va09_pwr_ctrl()

commit 3ba880a12df5aa4488c18281701b5b1bc3d4531a upstream.

The function regulator_get() returns an error pointer. Use IS_ERR() to
validate the return value.

Link: https://lore.kernel.org/r/20211222070930.9449-1-linmq006@gmail.com
Fixes: cf137b3ea49a ("scsi: ufs-mediatek: Support VA09 regulator operations")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: core: Show SCMD_LAST in text form

commit 3369046e54ca8f82e0cb17740643da2d80d3cfa8 upstream.

The SCSI debugfs code supports showing information about pending commands,
including translating SCSI command flags from numeric into text format.
Also convert the SCMD_LAST flag from numeric into text form.

Link: https://lore.kernel.org/r/20211129194609.3466071-4-bvanassche@acm.org
Fixes: 8930a6c20791 ("scsi: core: add support for request batching")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: hci_sync: Fix not setting adv set duration

commit f16a491c65d9eb19398b25aefc10c2d3313d17b3 upstream.

10bbffa3e88e attempted to fix the use of rotation duration as
advertising duration but it didn't change the if condition which still
uses the duration instead of the timeout.

Fixes: 10bbffa3e88e ("Bluetooth: Fix using advertising instance duration as timeout")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: usb: Correct reset handling of smsc95xx

commit 0bf3885324a8599e3af4c7379b8d4f621c9bbffa upstream.

On boards with LAN9514 and no preconfigured MAC address we don't get an
ip address from DHCP after commit a049a30fc27c ("net: usb: Correct PHY handling
of smsc95xx") anymore. Adding an explicit reset before starting the phy
fixes the issue.

[1]
https://lore.kernel.org/netdev/199eebbd6b97f52b9119c9fa4fd8504f8a34de18.camel@collabora.com/

From: Gabriel Hojda <ghojda@yo2urs.ro>
Fixes: a049a30fc27c ("net: usb: Correct PHY handling of smsc95xx")
Signed-off-by: Gabriel Hojda <ghojda@yo2urs.ro>
Signed-off-by: Markus Reichl <m.reichl@fivetechno.de>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: btusb: Return error code when getting patch status failed

commit 995d948cf2e45834275f07afc1c9881a9902e73c upstream.

If there are failure cases in getting patch status, it should return the
error code (-EIO).

Fixes: fc342c4dc4087 ("Bluetooth: btusb: Add protocol support for MediaTek MT7921U USB devices")
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Mark Chen <mark-yw.chen@mediatek.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation: fix firewire.rst ABI file path error

commit b0ac702f3329cdc8a06dcaac73183d4b5a2b942d upstream.

Adjust the path of the ABI files for firewire.rst to prevent a
documentation build error. Prevents this problem:

Sphinx parallel build error:
docutils.utils.SystemMessage: Documentation/driver-api/firewire.rst:22: (SEVERE/4) Problems with "include" directive path:
InputError: [Errno 2] No such file or directory: '../Documentation/driver-api/ABI/stable/firewire-cdev'.

Fixes: 2f4830ef96d2 ("FireWire: add driver-api Introduction section")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/20220119033905.4779-1-rdunlap@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation: refer to config RANDOMIZE_BASE for kernel address-space randomization

commit 82ca67321f55a8d1da6ac3ed611da3c32818bb37 upstream.

The config RANDOMIZE_SLAB does not exist, the authors probably intended to
refer to the config RANDOMIZE_BASE, which provides kernel address-space
randomization. They probably just confused SLAB with BASE (these two
four-letter words coincidentally share three common letters), as they also
point out the config SLAB_FREELIST_RANDOM as further randomization within
the same sentence.

Fix the reference of the config for kernel address-space randomization to
the config that provides that.

Fixes: 6e88559470f5 ("Documentation: Add section about CPU vulnerabilities for Spectre")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20211230171940.27558-1-lukas.bulwahn@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation, arch: Remove leftovers from CIFS_WEAK_PW_HASH

commit 2ac7069ad7647cd1d9ca5b08765a1e116e13cdc4 upstream.

This config was removed so remove all references to it.

Fixes: 76a3c92ec9e0 ("cifs: remove support for NTLM and weaker authentication algorithms")
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Reviewed-by: Steve French <smfrench@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de> [arch/arm/configs]
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation, arch: Remove leftovers from raw device

commit 473dcf0ffc31ce1135cd10578e7e06698cf51f4a upstream.

Raw device interface was removed so remove all references to configs
related to it.

Fixes: 603e4922f1c8 ("remove the raw driver")
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Acked-by: Arnd Bergmann <arnd@arndb.de> [arch/arm/configs]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation: ACPI: Fix data node reference documentation

commit a11174952205d082f1658fab4314f0caf706e0a8 upstream.

The data node reference documentation was missing a package that must
contain the property values, instead property name and multiple values
being present in a single package. This is not aligned with the _DSD
spec.

Fix it by adding the package for the values.

Also add the missing "reg" properties to two numbered nodes.

Fixes: b10134a3643d ("ACPI: property: Document hierarchical data extension references")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation: dmaengine: Correctly describe dmatest with channel unset

commit c61d7b2ef141abf81140756b45860a2306f395a2 upstream.

Currently the documentation states that channels must be configured before
running the dmatest. This has not been true since commit 6b41030fdc79
("dmaengine: dmatest: Restore default for channel"). Fix accordingly.

Fixes: 6b41030fdc79 ("dmaengine: dmatest: Restore default for channel")
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20211118100952.27268-3-daniel.thompson@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation: coresight: Fix documentation issue

commit 66bd1333abd7fa191f13b929c9119d6cd3df27b0 upstream.

Fix the description of the directories and attributes used
in cs_etm as used by perf.

Drop the references to the 'configurations' sub-directory which
had been removed in an earlier version of the patchset.

Fixes: f71cd93d5ea4 ("Documentation: coresight: Add documentation for CoreSight config")
Reported-by: German Gomex <german.gomez@arm.com>
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20211117164220.14883-1-mike.leach@linaro.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: correct MEDIA_TEST_SUPPORT help text

commit 09f4d1513267d0ab712f5d29e7bd136535748709 upstream.

Fix grammar/wording in the help text for MEDIA_TEST_SUPPORT.

Fixes: 4b32216adb01 ("media: split test drivers from platform directory")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vc4: hdmi: Make sure the device is powered with CEC

commit 20b0dfa86bef0e80b41b0e5ac38b92f23b6f27f9 upstream.

Similarly to what we encountered with the detect hook with DRM, nothing
actually prevents any of the CEC callback from being run while the HDMI
output is disabled.

However, this is an issue since any register access to the controller
when it's powered down will result in a silent hang.

Let's make sure we run the runtime_pm hooks when the CEC adapter is
opened and closed by the userspace to avoid that issue.

Fixes: 15b4511a4af6 ("drm/vc4: add HDMI CEC support")
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210819135931.895976-6-maxime@cerno.tech
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: rcar-csi2: Optimize the selection PHTW register

commit 549cc89cd09a85aaa16dc07ef3db811d5cf9bcb1 upstream.

PHTW register is selected based on default bit rate from Table[1].
for the bit rates less than or equal to 250. Currently first
value of default bit rate which is greater than or equal to
the caculated mbps is selected. This selection can be further
improved by selecting the default bit rate which is nearest to
the calculated value.

[1] specs r19uh0105ej0200-r-car-3rd-generation.pdf [Table 25.12]

Fixes: 769afd212b16 ("media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver")
Signed-off-by: Suresh Udipi <sudipi@jp.adit-jv.com>
Signed-off-by: Michael Rodin <mrodin@de.adit-jv.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: mcp251xfd: mcp251xfd_tef_obj_read(): fix typo in error message

commit 99e7cc3b3f85d9a583ab83f386315c59443509ae upstream.

This patch fixes a typo in the error message in
mcp251xfd_tef_obj_read(), if trying to read too many objects.

Link: https://lore.kernel.org/all/20220105154300.1258636-3-mkl@pengutronix.de
Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firmware: Update Kconfig help text for Google firmware

commit d185a3466f0cd5af8f1c5c782c53bc0e6f2e7136 upstream.

The help text for GOOGLE_FIRMWARE states that it should only be
enabled when building a kernel for Google's own servers. However,
many of the drivers dependent on it are also useful on Chromebooks or
on any platform using coreboot.

Update the help text to reflect this double duty.

Fixes: d384d6f43d1e ("firmware: google memconsole: Add coreboot support")
Reviewed-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Link: https://lore.kernel.org/r/20180618225540.GD14131@decadent.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

of: base: Improve argument length mismatch error

commit 5d05b811b5acb92fc581a7b328b36646c86f5ab9 upstream.

The cells_name field of of_phandle_iterator might be NULL. Use the
phandle name instead. With this change instead of:

OF: /soc/pinctrl@1000000: (null) = 3 found 2

We get:

OF: /soc/pinctrl@1000000: phandle pinctrl@1000000 needs 3, found 2

Which is a more helpful messages making DT debugging easier.

In this particular example the phandle name looks like duplicate of the
same node name. But note that the first node is the parent node
(it->parent), while the second is the phandle target (it->node). They
happen to be the same in the case that triggered this improvement. See
commit 72cb4c48a46a ("arm64: dts: qcom: ipq6018: Fix gpio-ranges
property").

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/f6a68e0088a552ea9dfd4d8e3b5b586d92594738.1640881913.git.baruch@tkos.co.il
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: fix error handling in radeon_driver_open_kms

commit 4722f463896cc0ef1a6f1c3cb2e171e949831249 upstream.

The return value was never initialized so the cleanup code executed when
it isn't even necessary.

Just add proper error handling.

Fixes: ab50cb9df889 ("drm/radeon/radeon_kms: Fix a NULL pointer dereference in radeon_driver_open_kms()")
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Jan Stancek <jstancek@redhat.com>
Tested-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath11k: qmi: avoid error messages when dma allocation fails

commit b9b5948cdd7bc8d9fa31c78cbbb04382c815587f upstream.

qmi tries to allocate a large contiguous dma memory at first,
on the AMD Ryzen platform it fails, then retries with small slices.
So set flag GFP_NOWARN to avoid flooding dmesg.

Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210823063258.37747-1-aaron.ma@canonical.com
Cc: "Limonciello, Mario" <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing/osnoise: Properly unhook events if start_per_cpu_kthreads() fails

commit 0878355b51f5f26632e652c848a8e174bb02d22d upstream.

If start_per_cpu_kthreads() called from osnoise_workload_start() returns
error, event hooks are left in broken state: unhook_irq_events() called
but unhook_thread_events() and unhook_softirq_events() not called, and
trace_osnoise_callback_enabled flag not cleared.

On the next tracer enable, hooks get not installed due to
trace_osnoise_callback_enabled flag.

And on the further tracer disable an attempt to remove non-installed
hooks happened, hitting a WARN_ON_ONCE() in tracepoint_remove_func().

Fix the error path by adding the missing part of cleanup.
While at this, introduce osnoise_unhook_events() to avoid code
duplication between this error path and normal tracer disable.

Link: https://lkml.kernel.org/r/20220109153459.3701773-1-nikita.yushchenko@virtuozzo.com
Cc: stable@vger.kernel.org
Fixes: bce29ac9ce0b ("trace: Add osnoise tracer")
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Nikita Yushchenko <nikita.yushchenko@virtuozzo.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: don't use the orphan list when migrating an inode

commit 6eeaf88fd586f05aaf1d48cb3a139d2a5c6eb055 upstream.

We probably want to remove the indirect block to extents migration
feature after a deprecation window, but until then, let's fix a
potential data loss problem caused by the fact that we put the
tmp_inode on the orphan list.  In the unlikely case where we crash and
do a journal recovery, the data blocks belonging to the inode being
migrated are also represented in the tmp_inode on the orphan list ---
and so its data blocks will get marked unallocated, and available for
reuse.

Instead, stop putting the tmp_inode on the oprhan list.  So in the
case where we crash while migrating the inode, we'll leak an inode,
which is not a disaster.  It will be easily fixed the next time we run
fsck, and it's better than potentially having blocks getting claimed
by two different files, and losing data as a result.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix an use-after-free issue about data=journal writeback mode

commit 5c48a7df91499e371ef725895b2e2d21a126e227 upstream.

Our syzkaller report an use-after-free issue that accessing the freed
buffer_head on the writeback page in __ext4_journalled_writepage(). The
problem is that if there was a truncate racing with the data=journalled
writeback procedure, the writeback length could become zero and
bget_one() refuse to get buffer_head's refcount, then the truncate
procedure release buffer once we drop page lock, finally, the last
ext4_walk_page_buffers() trigger the use-after-free problem.

sync                               truncate
ext4_sync_file()
file_write_and_wait_range()
                                   ext4_setattr(0)
                                    inode->i_size = 0
  ext4_writepage()
   len = 0
   __ext4_journalled_writepage()
    page_bufs = page_buffers(page)
    ext4_walk_page_buffers(bget_one) <- does not get refcount
                                    do_invalidatepage()
                                      free_buffer_head()
    ext4_walk_page_buffers(page_bufs) <- trigger use-after-free

After commit bdf96838aea6 ("ext4: fix race between truncate and
__ext4_journalled_writepage()"), we have already handled the racing
case, so the bget_one() and bput_one() are not needed. So this patch
simply remove these hunk, and recheck the i_size to make it safe.

Fixes: bdf96838aea6 ("ext4: fix race between truncate and __ext4_journalled_writepage()")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211225090937.712867-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix null-ptr-deref in '__ext4_journal_ensure_credits'

commit 298b5c521746d69c07beb2757292fb5ccc1b0f85 upstream.

We got issue as follows when run syzkaller test:
[ 1901.130043] EXT4-fs error (device vda): ext4_remount:5624: comm syz-executor.5: Abort forced by user
[ 1901.130901] Aborting journal on device vda-8.
[ 1901.131437] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.16: Detected aborted journal
[ 1901.131566] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.11: Detected aborted journal
[ 1901.132586] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.18: Detected aborted journal
[ 1901.132751] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.9: Detected aborted journal
[ 1901.136149] EXT4-fs error (device vda) in ext4_reserve_inode_write:6035: Journal has aborted
[ 1901.136837] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-fuzzer: Detected aborted journal
[ 1901.136915] ==================================================================
[ 1901.138175] BUG: KASAN: null-ptr-deref in __ext4_journal_ensure_credits+0x74/0x140 [ext4]
[ 1901.138343] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.13: Detected aborted journal
[ 1901.138398] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.1: Detected aborted journal
[ 1901.138808] Read of size 8 at addr 0000000000000000 by task syz-executor.17/968
[ 1901.138817]
[ 1901.138852] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.30: Detected aborted journal
[ 1901.144779] CPU: 1 PID: 968 Comm: syz-executor.17 Not tainted 4.19.90-vhulk2111.1.0.h893.eulerosv2r10.aarch64+ #1
[ 1901.146479] Hardware name: linux,dummy-virt (DT)
[ 1901.147317] Call trace:
[ 1901.147552]  dump_backtrace+0x0/0x2d8
[ 1901.147898]  show_stack+0x28/0x38
[ 1901.148215]  dump_stack+0xec/0x15c
[ 1901.148746]  kasan_report+0x108/0x338
[ 1901.149207]  __asan_load8+0x58/0xb0
[ 1901.149753]  __ext4_journal_ensure_credits+0x74/0x140 [ext4]
[ 1901.150579]  ext4_xattr_delete_inode+0xe4/0x700 [ext4]
[ 1901.151316]  ext4_evict_inode+0x524/0xba8 [ext4]
[ 1901.151985]  evict+0x1a4/0x378
[ 1901.152353]  iput+0x310/0x428
[ 1901.152733]  do_unlinkat+0x260/0x428
[ 1901.153056]  __arm64_sys_unlinkat+0x6c/0xc0
[ 1901.153455]  el0_svc_common+0xc8/0x320
[ 1901.153799]  el0_svc_handler+0xf8/0x160
[ 1901.154265]  el0_svc+0x10/0x218
[ 1901.154682] ==================================================================

This issue may happens like this:
Process1                               Process2
ext4_evict_inode
  ext4_journal_start
   ext4_truncate
     ext4_ind_truncate
       ext4_free_branches
         ext4_ind_truncate_ensure_credits
   ext4_journal_ensure_credits_fn
     ext4_journal_restart
       handle->h_transaction = NULL;
                                           mount -o remount,abort  /mnt
   -> trigger JBD abort
               start_this_handle -> will return failed
  ext4_xattr_delete_inode
    ext4_journal_ensure_credits
      ext4_journal_ensure_credits_fn
        __ext4_journal_ensure_credits
  jbd2_handle_buffer_credits
    journal = handle->h_transaction->t_journal; ->null-ptr-deref

Now, indirect truncate process didn't handle error. To solve this issue
maybe simply add check handle is abort in '__ext4_journal_ensure_credits'
is enough, and i also think this is necessary.

Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20211224100341.3299128-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: destroy ext4_fc_dentry_cachep kmemcache on module removal

commit ab047d516dea72f011c15c04a929851e4d053109 upstream.

The kmemcache for ext4_fc_dentry_cachep remains registered after module
removal.

Destroy ext4_fc_dentry_cachep kmemcache on module removal.

Fixes: aa75f4d3daaeb ("ext4: main fast-commit commit path")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211110134640.lyku5vklvdndw6uk@linutronix.de
Link: https://lore.kernel.org/r/YbiK3JetFFl08bd7@linutronix.de
Link: https://lore.kernel.org/r/20211223164436.2628390-1-bigeasy@linutronix.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fast commit may miss tracking unwritten range during ftruncate

commit 9725958bb75cdfa10f2ec11526fdb23e7485e8e4 upstream.

If use FALLOC_FL_KEEP_SIZE to alloc unwritten range at bottom, the
inode->i_size will not include the unwritten range. When call
ftruncate with fast commit enabled, it will miss to track the
unwritten range.

Change to trace the full range during ftruncate.

Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211223032337.5198-3-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: use ext4_ext_remove_space() for fast commit replay delete range

commit 0b5b5a62b945a141e64011b2f90ee7e46f14be98 upstream.

For now ,we use ext4_punch_hole() during fast commit replay delete range
procedure. But it will be affected by inode->i_size, which may not
correct during fast commit replay procedure. The following test will
failed.

-create & write foo (len 1000K)
-falloc FALLOC_FL_ZERO_RANGE foo (range 400K - 600K)
-create & fsync bar
-falloc FALLOC_FL_PUNCH_HOLE foo (range 300K-500K)
-fsync foo
-crash before a full commit

After the fast_commit reply procedure, the range 400K-500K will not be
removed. Because in this case, when calling ext4_punch_hole() the
inode->i_size is 0, and it just retruns with doing nothing.

Change to use ext4_ext_remove_space() instead of ext4_punch_hole()
to remove blocks of inode directly.

Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211223032337.5198-2-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: Fix BUG_ON in ext4_bread when write quota data

commit 380a0091cab482489e9b19e07f2a166ad2b76d5c upstream.

We got issue as follows when run syzkaller:
[  167.936972] EXT4-fs error (device loop0): __ext4_remount:6314: comm rep: Abort forced by user
[  167.938306] EXT4-fs (loop0): Remounting filesystem read-only
[  167.981637] Assertion failure in ext4_getblk() at fs/ext4/inode.c:847: '(EXT4_SB(inode->i_sb)->s_mount_state & EXT4_FC_REPLAY) || handle != NULL || create == 0'
[  167.983601] ------------[ cut here ]------------
[  167.984245] kernel BUG at fs/ext4/inode.c:847!
[  167.984882] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
[  167.985624] CPU: 7 PID: 2290 Comm: rep Tainted: G    B             5.16.0-rc5-next-20211217+ #123
[  167.986823] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014
[  167.988590] RIP: 0010:ext4_getblk+0x17e/0x504
[  167.989189] Code: c6 01 74 28 49 c7 c0 a0 a3 5c 9b b9 4f 03 00 00 48 c7 c2 80 9c 5c 9b 48 c7 c6 40 b6 5c 9b 48 c7 c7 20 a4 5c 9b e8 77 e3 fd ff <0f> 0b 8b 04 244
[  167.991679] RSP: 0018:ffff8881736f7398 EFLAGS: 00010282
[  167.992385] RAX: 0000000000000094 RBX: 1ffff1102e6dee75 RCX: 0000000000000000
[  167.993337] RDX: 0000000000000001 RSI: ffffffff9b6e29e0 RDI: ffffed102e6dee66
[  167.994292] RBP: ffff88816a076210 R08: 0000000000000094 R09: ffffed107363fa09
[  167.995252] R10: ffff88839b1fd047 R11: ffffed107363fa08 R12: ffff88816a0761e8
[  167.996205] R13: 0000000000000000 R14: 0000000000000021 R15: 0000000000000001
[  167.997158] FS:  00007f6a1428c740(0000) GS:ffff88839b000000(0000) knlGS:0000000000000000
[  167.998238] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  167.999025] CR2: 00007f6a140716c8 CR3: 0000000133216000 CR4: 00000000000006e0
[  167.999987] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  168.000944] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  168.001899] Call Trace:
[  168.002235]  <TASK>
[  168.007167]  ext4_bread+0xd/0x53
[  168.007612]  ext4_quota_write+0x20c/0x5c0
[  168.010457]  write_blk+0x100/0x220
[  168.010944]  remove_free_dqentry+0x1c6/0x440
[  168.011525]  free_dqentry.isra.0+0x565/0x830
[  168.012133]  remove_tree+0x318/0x6d0
[  168.014744]  remove_tree+0x1eb/0x6d0
[  168.017346]  remove_tree+0x1eb/0x6d0
[  168.019969]  remove_tree+0x1eb/0x6d0
[  168.022128]  qtree_release_dquot+0x291/0x340
[  168.023297]  v2_release_dquot+0xce/0x120
[  168.023847]  dquot_release+0x197/0x3e0
[  168.024358]  ext4_release_dquot+0x22a/0x2d0
[  168.024932]  dqput.part.0+0x1c9/0x900
[  168.025430]  __dquot_drop+0x120/0x190
[  168.025942]  ext4_clear_inode+0x86/0x220
[  168.026472]  ext4_evict_inode+0x9e8/0xa22
[  168.028200]  evict+0x29e/0x4f0
[  168.028625]  dispose_list+0x102/0x1f0
[  168.029148]  evict_inodes+0x2c1/0x3e0
[  168.030188]  generic_shutdown_super+0xa4/0x3b0
[  168.030817]  kill_block_super+0x95/0xd0
[  168.031360]  deactivate_locked_super+0x85/0xd0
[  168.031977]  cleanup_mnt+0x2bc/0x480
[  168.033062]  task_work_run+0xd1/0x170
[  168.033565]  do_exit+0xa4f/0x2b50
[  168.037155]  do_group_exit+0xef/0x2d0
[  168.037666]  __x64_sys_exit_group+0x3a/0x50
[  168.038237]  do_syscall_64+0x3b/0x90
[  168.038751]  entry_SYSCALL_64_after_hwframe+0x44/0xae

In order to reproduce this problem, the following conditions need to be met:
1. Ext4 filesystem with no journal;
2. Filesystem image with incorrect quota data;
3. Abort filesystem forced by user;
4. umount filesystem;

As in ext4_quota_write:
...
         if (EXT4_SB(sb)->s_journal && !handle) {
                 ext4_msg(sb, KERN_WARNING, "Quota write (off=%llu, len=%llu)"
                         " cancelled because transaction is not started",
                         (unsigned long long)off, (unsigned long long)len);
                 return -EIO;
         }
...
We only check handle if NULL when filesystem has journal. There is need
check handle if NULL even when filesystem has no journal.

Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20211223015506.297766-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: set csum seed in tmp inode while migrating to extents

commit e81c9302a6c3c008f5c30beb73b38adb0170ff2d upstream.

When migrating to extents, the temporary inode will have it's own checksum
seed. This means that, when swapping the inodes data, the inode checksums
will be incorrect.

This can be fixed by recalculating the extents checksums again. Or simply
by copying the seed into the temporary inode.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=213357
Reported-by: Jeroen van Wolffelaar <jeroen@wolffelaar.nl>
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Link: https://lore.kernel.org/r/20211214175058.19511-1-lhenriques@suse.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix fast commit may miss tracking range for FALLOC_FL_ZERO_RANGE

commit 5e4d0eba1ccaf19f93222abdeda5a368be141785 upstream.

when call falloc with FALLOC_FL_ZERO_RANGE, to set an range to unwritten,
which has been already initialized. If the range is align to blocksize,
fast commit will not track range for this change.

Also track range for unwritten range in ext4_map_blocks().

Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211221022839.374606-1-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: initialize err_blk before calling __ext4_get_inode_loc

commit c27c29c6af4f3f4ce925a2111c256733c5a5b430 upstream.

It is not guaranteed that __ext4_get_inode_loc will definitely set
err_blk pointer when it returns EIO. To avoid using uninitialized
variables, let's first set err_blk to 0.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211201163421.2631661-1-harshads@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix a possible ABBA deadlock due to busy PA

commit 8c80fb312d7abf8bcd66cca1d843a80318a2c522 upstream.

We found on older kernel (3.10) that in the scenario of insufficient
disk space, system may trigger an ABBA deadlock problem, it seems that
this problem still exists in latest kernel, try to fix it here. The
main process triggered by this problem is that task A occupies the PA
and waits for the jbd2 transaction finish, the jbd2 transaction waits
for the completion of task B's IO (plug_list), but task B waits for
the release of PA by task A to finish discard, which indirectly forms
an ABBA deadlock. The related calltrace is as follows:

    Task A
    vfs_write
    ext4_mb_new_blocks()
    ext4_mb_mark_diskspace_used()       JBD2
    jbd2_journal_get_write_access()  -> jbd2_journal_commit_transaction()
  ->schedule()                          filemap_fdatawait()
|                                              |
| Task B                                       |
| do_unlinkat()                                |
| ext4_evict_inode()                           |
| jbd2_journal_begin_ordered_truncate()        |
| filemap_fdatawrite_range()                   |
| ext4_mb_new_blocks()                         |
  -ext4_mb_discard_group_preallocations() <-----

Here, try to cancel ext4_mb_discard_group_preallocations() internal
retry due to PA busy, and do a limited number of retries inside
ext4_mb_discard_preallocations(), which can circumvent the above
problems, but also has some advantages:

1. Since the PA is in a busy state, if other groups have free PAs,
   keeping the current PA may help to reduce fragmentation.
2. Continue to traverse forward instead of waiting for the current
   group PA to be released. In most scenarios, the PA discard time
   can be reduced.

However, in the case of smaller free space, if only a few groups have
space, then due to multiple traversals of the group, it may increase
CPU overhead. But in contrast, I feel that the overall benefit is
better than the cost.

Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/1637630277-23496-1-git-send-email-brookxu.cn@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: make sure quota gets properly shutdown on error

commit 15fc69bbbbbc8c72e5f6cc4e1be0f51283c5448e upstream.

When we hit an error when enabling quotas and setting inode flags, we do
not properly shutdown quota subsystem despite returning error from
Q_QUOTAON quotactl. This can lead to some odd situations like kernel
using quota file while it is still writeable for userspace. Make sure we
properly cleanup the quota subsystem in case of error.

Signed-off-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20211007155336.12493-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: make sure to reset inode lockdep class when quota enabling fails

commit 4013d47a5307fdb5c13370b5392498b00fedd274 upstream.

When we succeed in enabling some quota type but fail to enable another
one with quota feature, we correctly disable all enabled quota types.
However we forget to reset i_data_sem lockdep class. When the inode gets
freed and reused, it will inherit this lockdep class (i_data_sem is
initialized only when a slab is created) and thus eventually lockdep
barfs about possible deadlocks.

Reported-and-tested-by: syzbot+3b6f9218b1301ddda3e2@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20211007155336.12493-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: respect the max size in the header when activating swap file

commit c2f822635df873c510bda6fb7fd1b10b7c31be2d upstream.

If we extended the size of a swapfile after its header was created (by the
mkswap utility) and then try to activate it, we will map the entire file
when activating the swap file, instead of limiting to the max size defined
in the swap file's header.

Currently test case generic/643 from fstests fails because we do not
respect that size limit defined in the swap file's header.

So fix this by not mapping file ranges beyond the max size defined in the
swap header.

This is the same type of bug that iomap used to have, and was fixed in
commit 36ca7943ac18ae ("mm/swap: consider max pages in
iomap_swapfile_add_extent").

Fixes: ed46ff3d423780 ("Btrfs: support swap files")
CC: stable@vger.kernel.org # 5.4+
Reviewed-and-tested-by: Josef Bacik <josef@toxicpanda.com
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: check the root node for uptodate before returning it

commit 120de408e4b97504a2d9b5ca534b383de2c73d49 upstream.

Now that we clear the extent buffer uptodate if we fail to write it out
we need to check to see if our root node is uptodate before we search
down it. Otherwise we could return stale data (or potentially corrupt
data that was caught by the write verification step) and think that the
path is OK to search down.

CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix deadlock between quota enable and other quota operations

commit 232796df8c1437c41d308d161007f0715bac0a54 upstream.

When enabling quotas, we attempt to commit a transaction while holding the
mutex fs_info->qgroup_ioctl_lock. This can result on a deadlock with other
quota operations such as:

- qgroup creation and deletion, ioctl BTRFS_IOC_QGROUP_CREATE;

- adding and removing qgroup relations, ioctl BTRFS_IOC_QGROUP_ASSIGN.

This is because these operations join a transaction and after that they
attempt to lock the mutex fs_info->qgroup_ioctl_lock. Acquiring that mutex
after joining or starting a transaction is a pattern followed everywhere
in qgroups, so the quota enablement operation is the one at fault here,
and should not commit a transaction while holding that mutex.

Fix this by making the transaction commit while not holding the mutex.
We are safe from two concurrent tasks trying to enable quotas because
we are serialized by the rw semaphore fs_info->subvol_sem at
btrfs_ioctl_quota_ctl(), which is the only call site for enabling
quotas.

When this deadlock happens, it produces a trace like the following:

  INFO: task syz-executor:25604 blocked for more than 143 seconds.
  Not tainted 5.15.0-rc6 #4
  "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  task:syz-executor state:D stack:24800 pid:25604 ppid: 24873 flags:0x00004004
  Call Trace:
  context_switch kernel/sched/core.c:4940 [inline]
  __schedule+0xcd9/0x2530 kernel/sched/core.c:6287
  schedule+0xd3/0x270 kernel/sched/core.c:6366
  btrfs_commit_transaction+0x994/0x2e90 fs/btrfs/transaction.c:2201
  btrfs_quota_enable+0x95c/0x1790 fs/btrfs/qgroup.c:1120
  btrfs_ioctl_quota_ctl fs/btrfs/ioctl.c:4229 [inline]
  btrfs_ioctl+0x637e/0x7b70 fs/btrfs/ioctl.c:5010
  vfs_ioctl fs/ioctl.c:51 [inline]
  __do_sys_ioctl fs/ioctl.c:874 [inline]
  __se_sys_ioctl fs/ioctl.c:860 [inline]
  __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860
  do_syscall_x64 arch/x86/entry/common.c:50 [inline]
  do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
  entry_SYSCALL_64_after_hwframe+0x44/0xae
  RIP: 0033:0x7f86920b2c4d
  RSP: 002b:00007f868f61ac58 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
  RAX: ffffffffffffffda RBX: 00007f86921d90a0 RCX: 00007f86920b2c4d
  RDX: 0000000020005e40 RSI: 00000000c0109428 RDI: 0000000000000008
  RBP: 00007f869212bd80 R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000246 R12: 00007f86921d90a0
  R13: 00007fff6d233e4f R14: 00007fff6d233ff0 R15: 00007f868f61adc0
  INFO: task syz-executor:25628 blocked for more than 143 seconds.
  Not tainted 5.15.0-rc6 #4
  "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  task:syz-executor state:D stack:29080 pid:25628 ppid: 24873 flags:0x00004004
  Call Trace:
  context_switch kernel/sched/core.c:4940 [inline]
  __schedule+0xcd9/0x2530 kernel/sched/core.c:6287
  schedule+0xd3/0x270 kernel/sched/core.c:6366
  schedule_preempt_disabled+0xf/0x20 kernel/sched/core.c:6425
  __mutex_lock_common kernel/locking/mutex.c:669 [inline]
  __mutex_lock+0xc96/0x1680 kernel/locking/mutex.c:729
  btrfs_remove_qgroup+0xb7/0x7d0 fs/btrfs/qgroup.c:1548
  btrfs_ioctl_qgroup_create fs/btrfs/ioctl.c:4333 [inline]
  btrfs_ioctl+0x683c/0x7b70 fs/btrfs/ioctl.c:5014
  vfs_ioctl fs/ioctl.c:51 [inline]
  __do_sys_ioctl fs/ioctl.c:874 [inline]
  __se_sys_ioctl fs/ioctl.c:860 [inline]
  __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860
  do_syscall_x64 arch/x86/entry/common.c:50 [inline]
  do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
  entry_SYSCALL_64_after_hwframe+0x44/0xae

Reported-by: Hao Sun <sunhao.th@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CACkBjsZQF19bQ1C6=yetF3BvL10OSORpFUcWXTP6HErshDB4dQ@mail.gmail.com/
Fixes: 340f1aa27f36 ("btrfs: qgroups: Move transaction management inside btrfs_quota_enable/disable")
CC: stable@vger.kernel.org # 4.19
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfrm: fix dflt policy check when there is no policy configured

commit ec3bb890817e4398f2d46e12e2e205495b116be9 upstream.

When there is no policy configured on the system, the default policy is
checked in xfrm_route_forward. However, it was done with the wrong
direction (XFRM_POLICY_FWD instead of XFRM_POLICY_OUT).
The default policy for XFRM_POLICY_FWD was checked just before, with a call
to xfrm[46]_policy_check().

CC: stable@vger.kernel.org
Fixes: 2d151d39073a ("xfrm: Add possibility to set the default to block if we have no policy")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>