Vladimir Oltean [Wed, 12 Jan 2022 20:21:27 +0000 (22:21 +0200)]
net: mscc: ocelot: don't let phylink re-enable TX PAUSE on the NPI port
commit
33cb0ff30cff104e753f7882c99e54cf67ea7903 upstream.
Since commit
b39648079db4 ("net: mscc: ocelot: disable flow control on
NPI interface"), flow control should be disabled on the DSA CPU port
when used in NPI mode.
However, the commit blamed in the Fixes: tag below broke this, because
it allowed felix_phylink_mac_link_up() to overwrite SYS_PAUSE_CFG_PAUSE_ENA
for the DSA CPU port.
This issue became noticeable since the device tree update from commit
8fcea7be5736 ("arm64: dts: ls1028a: mark internal links between Felix
and ENETC as capable of flow control").
The solution is to check whether this is the currently configured NPI
port from ocelot_phylink_mac_link_up(), and to not modify the statically
disabled PAUSE frame transmission if it is.
When the port is configured for lossless mode as opposed to tail drop
mode, but the link partner (DSA master) doesn't observe the transmitted
PAUSE frames, the switch termination throughput is much worse, as can be
seen below.
Before:
root@debian:~# iperf3 -c 192.168.100.2
Connecting to host 192.168.100.2, port 5201
[ 5] local 192.168.100.1 port 37504 connected to 192.168.100.2 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 28.4 MBytes 238 Mbits/sec 357 22.6 KBytes
[ 5] 1.00-2.00 sec 33.6 MBytes 282 Mbits/sec 426 19.8 KBytes
[ 5] 2.00-3.00 sec 34.0 MBytes 285 Mbits/sec 343 21.2 KBytes
[ 5] 3.00-4.00 sec 32.9 MBytes 276 Mbits/sec 354 22.6 KBytes
[ 5] 4.00-5.00 sec 32.3 MBytes 271 Mbits/sec 297 18.4 KBytes
^C[ 5] 5.00-5.06 sec 2.05 MBytes 270 Mbits/sec 45 19.8 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-5.06 sec 163 MBytes 271 Mbits/sec 1822 sender
[ 5] 0.00-5.06 sec 0.00 Bytes 0.00 bits/sec receiver
After:
root@debian:~# iperf3 -c 192.168.100.2
Connecting to host 192.168.100.2, port 5201
[ 5] local 192.168.100.1 port 49470 connected to 192.168.100.2 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 112 MBytes 941 Mbits/sec 259 143 KBytes
[ 5] 1.00-2.00 sec 110 MBytes 920 Mbits/sec 329 144 KBytes
[ 5] 2.00-3.00 sec 112 MBytes 936 Mbits/sec 255 144 KBytes
[ 5] 3.00-4.00 sec 110 MBytes 927 Mbits/sec 355 105 KBytes
[ 5] 4.00-5.00 sec 110 MBytes 926 Mbits/sec 350 156 KBytes
[ 5] 5.00-6.00 sec 110 MBytes 925 Mbits/sec 305 148 KBytes
[ 5] 6.00-7.00 sec 110 MBytes 924 Mbits/sec 320 143 KBytes
[ 5] 7.00-8.00 sec 110 MBytes 925 Mbits/sec 273 97.6 KBytes
[ 5] 8.00-9.00 sec 109 MBytes 913 Mbits/sec 299 141 KBytes
[ 5] 9.00-10.00 sec 110 MBytes 922 Mbits/sec 287 146 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 1.08 GBytes 926 Mbits/sec 3032 sender
[ 5] 0.00-10.00 sec 1.08 GBytes 925 Mbits/sec receiver
Fixes:
de274be32cb2 ("net: dsa: felix: set TX flow control according to the phylink_mac_link_up resolution")
Reported-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kevin Bracey [Wed, 12 Jan 2022 17:02:10 +0000 (19:02 +0200)]
net_sched: restore "mpu xxx" handling
commit
fb80445c438c78b40b547d12b8d56596ce4ccfeb upstream.
commit
56b765b79e9a ("htb: improved accuracy at high rates") broke
"overhead X", "linklayer atm" and "mpu X" attributes.
"overhead X" and "linklayer atm" have already been fixed. This restores
the "mpu X" handling, as might be used by DOCSIS or Ethernet shaping:
tc class add ... htb rate X overhead 4 mpu 64
The code being fixed is used by htb, tbf and act_police. Cake has its
own mpu handling. qdisc_calculate_pkt_len still uses the size table
containing values adjusted for mpu by user space.
iproute2 tc has always passed mpu into the kernel via a tc_ratespec
structure, but the kernel never directly acted on it, merely stored it
so that it could be read back by `tc class show`.
Rather, tc would generate length-to-time tables that included the mpu
(and linklayer) in their construction, and the kernel used those tables.
Since v3.7, the tables were no longer used. Along with "mpu", this also
broke "overhead" and "linklayer" which were fixed in
01cb71d2d47b
("net_sched: restore "overhead xxx" handling", v3.10) and
8a8e3d84b171
("net_sched: restore "linklayer atm" handling", v3.11).
"overhead" was fixed by simply restoring use of tc_ratespec::overhead -
this had originally been used by the kernel but was initially omitted
from the new non-table-based calculations.
"linklayer" had been handled in the table like "mpu", but the mode was
not originally passed in tc_ratespec. The new implementation was made to
handle it by getting new versions of tc to pass the mode in an extended
tc_ratespec, and for older versions of tc the table contents were analysed
at load time to deduce linklayer.
As "mpu" has always been given to the kernel in tc_ratespec,
accompanying the mpu-based table, we can restore system functionality
with no userspace change by making the kernel act on the tc_ratespec
value.
Fixes:
56b765b79e9a ("htb: improved accuracy at high rates")
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Vimalkumar <j.vimal@gmail.com>
Link: https://lore.kernel.org/r/20220112170210.1014351-1-kevin@bracey.fi
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Elder [Wed, 12 Jan 2022 13:30:10 +0000 (07:30 -0600)]
net: ipa: fix atomic update in ipa_endpoint_replenish()
commit
6c0e3b5ce94947b311348c367db9e11dcb2ccc93 upstream.
In ipa_endpoint_replenish(), if an error occurs when attempting to
replenish a receive buffer, we just quit and try again later. In
that case we increment the backlog count to reflect that the attempt
was unsuccessful. Then, if the add_one flag was true we increment
the backlog again.
This second increment is not included in the backlog local variable
though, and its value determines whether delayed work should be
scheduled. This is a bug.
Fix this by determining whether 1 or 2 should be added to the
backlog before adding it in a atomic_add_return() call.
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Fixes:
84f9bd12d46db ("soc: qcom: ipa: IPA endpoints")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jie Wang [Wed, 12 Jan 2022 12:54:18 +0000 (20:54 +0800)]
net: bonding: fix bond_xmit_broadcast return value error bug
commit
4e5bd03ae34652cd932ab4c91c71c511793df75c upstream.
In Linux bonding scenario, one packet is copied to several copies and sent
by all slave device of bond0 in mode 3(broadcast mode). The mode 3 xmit
function bond_xmit_broadcast() only ueses the last slave device's tx result
as the final result. In this case, if the last slave device is down, then
it always return NET_XMIT_DROP, even though the other slave devices xmit
success. It may cause the tx statistics error, and cause the application
(e.g. scp) consider the network is unreachable.
For example, use the following command to configure server A.
echo 3 > /sys/class/net/bond0/bonding/mode
ifconfig bond0 up
ifenslave bond0 eth0 eth1
ifconfig bond0 192.168.1.125
ifconfig eth0 up
ifconfig eth1 down
The slave device eth0 and eth1 are connected to server B(192.168.1.107).
Run the ping 192.168.1.107 -c 3 -i 0.2 command, the following information
is displayed.
PING 192.168.1.107 (192.168.1.107) 56(84) bytes of data.
64 bytes from 192.168.1.107: icmp_seq=1 ttl=64 time=0.077 ms
64 bytes from 192.168.1.107: icmp_seq=2 ttl=64 time=0.056 ms
64 bytes from 192.168.1.107: icmp_seq=3 ttl=64 time=0.051 ms
192.168.1.107 ping statistics
0 packets transmitted, 3 received
Actually, the slave device eth0 of the bond successfully sends three
ICMP packets, but the result shows that 0 packets are transmitted.
Also if we use scp command to get remote files, the command end with the
following printings.
ssh_exchange_identification: read: Connection timed out
So this patch modifies the bond_xmit_broadcast to return NET_XMIT_SUCCESS
if one slave device in the bond sends packets successfully. If all slave
devices send packets fail, the discarded packets stats is increased. The
skb is released when there is no slave device in the bond or the last slave
device is down.
Fixes:
ae46f184bc1f ("bonding: propagate transmit status")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miroslav Lichvar [Tue, 11 Jan 2022 15:10:53 +0000 (16:10 +0100)]
net: fix sock_timestamping_bind_phc() to release device
commit
2a4d75bfe41232608f5596a6d1369f92ccb20817 upstream.
Don't forget to release the device in sock_timestamping_bind_phc() after
it was used to get the vclock indices.
Fixes:
d463126e23f1 ("net: sock: extend SO_TIMESTAMPING for PHC binding")
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Heidelberg [Sat, 30 Oct 2021 10:04:12 +0000 (12:04 +0200)]
arm64: dts: qcom: msm8996: drop not documented adreno properties
commit
c41910f257a22dc406c60d8826b4a3b5398003a3 upstream.
These properties aren't documented nor implemented in the driver.
Drop them.
Fixes warnings as:
$ make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/msm/gpu.yaml
...
arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml: gpu@b00000: 'qcom,gpu-quirk-fault-detect-mask', 'qcom,gpu-quirk-two-pass-use-wfi' do not match any of the regexes: 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/display/msm/gpu.yaml
...
Fixes:
69cc3114ab0f ("arm64: dts: Add Adreno GPU definitions")
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211030100413.28370-1-david@ixit.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leon Romanovsky [Sun, 28 Nov 2021 12:14:46 +0000 (14:14 +0200)]
devlink: Remove misleading internal_flags from health reporter dump
commit
e9538f8270db24d272659e15841854c7ea11119e upstream.
DEVLINK_CMD_HEALTH_REPORTER_DUMP_GET command doesn't have .doit callback
and has no use in internal_flags at all. Remove this misleading assignment.
Fixes:
e44ef4e4516c ("devlink: Hang reporter's dump method on a dumpit cb")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zechuan Chen [Tue, 28 Dec 2021 11:13:38 +0000 (19:13 +0800)]
perf probe: Fix ppc64 'perf probe add events failed' case
commit
4624f199327a704dd1069aca1c3cadb8f2a28c6f upstream.
Because of commit
bf794bf52a80c627 ("powerpc/kprobes: Fix kallsyms
lookup across powerpc ABIv1 and ABIv2"), in ppc64 ABIv1, our perf
command eliminates the need to use the prefix "." at the symbol name.
But when the command "perf probe -a schedule" is executed on ppc64
ABIv1, it obtains two symbol address information through /proc/kallsyms,
for example:
cat /proc/kallsyms | grep -w schedule
c000000000657020 T .schedule
c000000000d4fdb8 D schedule
The symbol "D schedule" is not a function symbol, and perf will print:
"p:probe/schedule _text+
13958584"Failed to write event: Invalid argument
Therefore, when searching symbols from map and adding probe point for
them, a symbol type check is added. If the type of symbol is not a
function, skip it.
Fixes:
bf794bf52a80c627 ("powerpc/kprobes: Fix kallsyms lookup across powerpc ABIv1 and ABIv2")
Signed-off-by: Zechuan Chen <chenzechuan1@huawei.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jianlin Lv <Jianlin.Lv@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20211228111338.218602-1-chenzechuan1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Uwe Kleine-König [Fri, 3 Dec 2021 21:05:44 +0000 (22:05 +0100)]
perf tools: Drop requirement for libstdc++.so for libopencsd check
commit
ed17b1914978eddb2b01f2d34577f1c82518c650 upstream.
It's possible to link against libopencsd_c_api without having
libstdc++.so available, only libstdc++.so.6.0.28 (or whatever version is
in use) needs to be available. The same holds true for libopencsd.so.
When -lstdc++ (or -lopencsd) is explicitly passed to the linker however
the .so file must be available.
So wrap adding the dependencies into a check for static linking that
actually requires adding them all. The same construct is already used
for some other tests in the same file to reduce dependencies in the
dynamic linking case.
Fixes:
573cf5c9a152 ("perf build: Add missing -lstdc++ when linking with libopencsd")
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Cc: Adrian Bunk <bunk@debian.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Branislav Rankov <branislav.rankov@arm.com>
Cc: Diederik de Haas <didi.debian@cknow.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/all/20211203210544.1137935-1-uwe@kleine-koenig.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tudor Ambarus [Wed, 15 Dec 2021 11:01:13 +0000 (13:01 +0200)]
dmaengine: at_xdmac: Fix at_xdmac_lld struct definition
commit
912f7c6f7fac273f40e621447cf17d14b50d6e5b upstream.
The hardware channel next descriptor view structure contains just
fields of 32 bits, while dma_addr_t can be of type u64 or u32
depending on CONFIG_ARCH_DMA_ADDR_T_64BIT. Force u32 to comply with
what the hardware expects.
Fixes:
e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211215110115.191749-11-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tudor Ambarus [Wed, 15 Dec 2021 11:01:12 +0000 (13:01 +0200)]
dmaengine: at_xdmac: Fix lld view setting
commit
1385eb4d14d447cc5d744bc2ac34f43be66c9963 upstream.
AT_XDMAC_CNDC_NDVIEW_NDV3 was set even for AT_XDMAC_MBR_UBC_NDV2,
because of the wrong bit handling. Fix it.
Fixes:
ee0fe35c8dcd ("dmaengine: xdmac: Handle descriptor's view 3 registers")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211215110115.191749-10-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tudor Ambarus [Wed, 15 Dec 2021 11:01:10 +0000 (13:01 +0200)]
dmaengine: at_xdmac: Fix concurrency over xfers_list
commit
18deddea9184b62941395889ff7659529c877326 upstream.
Since tx_submit can be called from a hard IRQ, xfers_list must be
protected with a lock to avoid concurency on the list's elements.
Since at_xdmac_handle_cyclic() is called from a tasklet, spin_lock_irq
is enough to protect from a hard IRQ.
Fixes:
e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211215110115.191749-8-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tudor Ambarus [Wed, 15 Dec 2021 11:01:06 +0000 (13:01 +0200)]
dmaengine: at_xdmac: Print debug message after realeasing the lock
commit
5edc24ac876a928f36f407a0fcdb33b94a3a210f upstream.
It is desirable to do the prints without the lock held if possible, so
move the print after the lock is released.
Fixes:
e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211215110115.191749-4-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tudor Ambarus [Wed, 15 Dec 2021 11:01:05 +0000 (13:01 +0200)]
dmaengine: at_xdmac: Start transfer for cyclic channels in issue_pending
commit
e6af9b05bec63cd4d1de2a33968cd0be2a91282a upstream.
Cyclic channels must too call issue_pending in order to start a transfer.
Start the transfer in issue_pending regardless of the type of channel.
This wrongly worked before, because in the past the transfer was started
at tx_submit level when only a desc in the transfer list.
Fixes:
e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211215110115.191749-3-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tudor Ambarus [Wed, 15 Dec 2021 11:01:04 +0000 (13:01 +0200)]
dmaengine: at_xdmac: Don't start transactions at tx_submit level
commit
bccfb96b59179d4f96cbbd1ddff8fac6d335eae4 upstream.
tx_submit is supposed to push the current transaction descriptor to a
pending queue, waiting for issue_pending() to be called. issue_pending()
must start the transfer, not tx_submit(), thus remove
at_xdmac_start_xfer() from at_xdmac_tx_submit(). Clients of at_xdmac that
assume that tx_submit() starts the transfer must be updated and call
dma_async_issue_pending() if they miss to call it (one example is
atmel_serial).
As the at_xdmac_start_xfer() is now called only from
at_xdmac_advance_work() when !at_xdmac_chan_is_enabled(), the
at_xdmac_chan_is_enabled() check is no longer needed in
at_xdmac_start_xfer(), thus remove it.
Fixes:
e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211215110115.191749-2-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adrian Hunter [Wed, 12 Jan 2022 08:50:57 +0000 (10:50 +0200)]
perf script: Fix hex dump character output
commit
62942e9fda9fd1def10ffcbd5e1c025b3c9eec17 upstream.
Using grep -C with perf script -D can give erroneous results as grep loses
lines due to non-printable characters, for example, below the 0020, 0060
and 0070 lines are missing:
$ perf script -D | grep -C10 AUX | head
. 0010: 08 00 00 00 00 00 00 00 1f 00 00 00 00 00 00 00 ................
. 0030: 01 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 ................
. 0040: 00 08 00 00 00 00 00 00 02 00 00 00 00 00 00 00 ................
. 0050: 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................
. 0080: 02 00 00 00 00 00 00 00 1b 00 00 00 00 00 00 00 ................
. 0090: 00 00 00 00 00 00 00 00 ........
0 0 0x450 [0x98]: PERF_RECORD_AUXTRACE_INFO type: 1
PMU Type 8
Time Shift 31
perf's isprint() is a custom implementation from the kernel, but the
kernel's _ctype appears to include characters from Latin-1 Supplement which
is not compatible with, for example, UTF-8. Fix by checking also isascii().
After:
$ tools/perf/perf script -D | grep -C10 AUX | head
. 0010: 08 00 00 00 00 00 00 00 1f 00 00 00 00 00 00 00 ................
. 0020: 03 84 32 2f 00 00 00 00 63 7c 4f d2 fa ff ff ff ..2/....c|O.....
. 0030: 01 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 ................
. 0040: 00 08 00 00 00 00 00 00 02 00 00 00 00 00 00 00 ................
. 0050: 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................
. 0060: 00 02 00 00 00 00 00 00 00 c0 03 00 00 00 00 00 ................
. 0070: e2 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00 ................
. 0080: 02 00 00 00 00 00 00 00 1b 00 00 00 00 00 00 00 ................
. 0090: 00 00 00 00 00 00 00 00 ........
Fixes:
3052ba56bcb58904 ("tools perf: Move from sane_ctype.h obtained from git to the Linux's original")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20220112085057.277205-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guillaume Nault [Mon, 10 Jan 2022 13:43:11 +0000 (14:43 +0100)]
libcxgb: Don't accidentally set RTO_ONLINK in cxgb_find_route()
commit
a915deaa9abe4fb3a440312c954253a6a733608e upstream.
Mask the ECN bits before calling ip_route_output_ports(). The tos
variable might be passed directly from an IPv4 header, so it may have
the last ECN bit set. This interferes with the route lookup process as
ip_route_output_key_hash() interpretes this bit specially (to restrict
the route scope).
Found by code inspection, compile tested only.
Fixes:
804c2f3e36ef ("libcxgb,iw_cxgb4,cxgbit: add cxgb_find_route()")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guillaume Nault [Mon, 10 Jan 2022 13:43:09 +0000 (14:43 +0100)]
gre: Don't accidentally set RTO_ONLINK in gre_fill_metadata_dst()
commit
f7716b318568b22fbf0e3be99279a979e217cf71 upstream.
Mask the ECN bits before initialising ->flowi4_tos. The tunnel key may
have the last ECN bit set, which will interfere with the route lookup
process as ip_route_output_key_hash() interpretes this bit specially
(to restrict the route scope).
Found by code inspection, compile tested only.
Fixes:
962924fa2b7a ("ip_gre: Refactor collect metatdata mode tunnel xmit to ip_md_tunnel_xmit")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eli Cohen [Wed, 5 Jan 2022 11:46:41 +0000 (13:46 +0200)]
vdpa/mlx5: Restore cur_num_vqs in case of failure in change_num_qps()
commit
37e07e705888e4c3502f204e9c6785c9c2d6d86a upstream.
Restore ndev->cur_num_vqs to the original value in case change_num_qps()
fails.
Fixes:
52893733f2c5 ("vdpa/mlx5: Add multiqueue support")
Reviewed-by: Si-Wei Liu<si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20220105114646.577224-10-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guillaume Nault [Mon, 10 Jan 2022 13:43:06 +0000 (14:43 +0100)]
xfrm: Don't accidentally set RTO_ONLINK in decode_session4()
commit
23e7b1bfed61e301853b5e35472820d919498278 upstream.
Similar to commit
94e2238969e8 ("xfrm4: strip ECN bits from tos field"),
clear the ECN bits from iph->tos when setting ->flowi4_tos.
This ensures that the last bit of ->flowi4_tos is cleared, so
ip_route_output_key_hash() isn't going to restrict the scope of the
route lookup.
Use ~INET_ECN_MASK instead of IPTOS_RT_MASK, because we have no reason
to clear the high order bits.
Found by code inspection, compile tested only.
Fixes:
4da3089f2b58 ("[IPSEC]: Use TOS when doing tunnel lookups")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johannes Berg [Fri, 10 Dec 2021 07:06:11 +0000 (09:06 +0200)]
iwlwifi: fix Bz NMI behaviour
commit
fdfde0cb79264f88992e72b5a056a3a3284fcaad upstream.
Contrary to what was stated before, the hardware hasn't changed
the bits here yet. In any case, the new CSR is also directly
(lower 16 bits) connected to UREG_DOORBELL_TO_ISR6, so if it
still changes the changes would be there. Adjust the code and
comments accordingly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes:
6c0795f1a524 ("iwlwifi: implement Bz NMI behaviour")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211210090244.75b6207536e3.I7d170a48a9096e6b7269c3a9f447c326f929b171@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Tue, 18 Jan 2022 11:43:40 +0000 (03:43 -0800)]
netns: add schedule point in ops_exit_list()
commit
2836615aa22de55b8fca5e32fe1b27a67cda625e upstream.
When under stress, cleanup_net() can have to dismantle
netns in big numbers. ops_exit_list() currently calls
many helpers [1] that have no schedule point, and we can
end up with soft lockups, particularly on hosts
with many cpus.
Even for moderate amount of netns processed by cleanup_net()
this patch avoids latency spikes.
[1] Some of these helpers like fib_sync_up() and fib_sync_down_dev()
are very slow because net/ipv4/fib_semantics.c uses host-wide hash tables,
and ifindex is used as the only input of two hash functions.
ifindexes tend to be the same for all netns (lo.ifindex==1 per instance)
This will be fixed in a separate patch.
Fixes:
72ad937abd0a ("net: Add support for batching network namespace cleanups")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Thu, 13 Jan 2022 09:22:29 +0000 (01:22 -0800)]
inet: frags: annotate races around fqdir->dead and fqdir->high_thresh
commit
91341fa0003befd097e190ec2a4bf63ad957c49a upstream.
Both fields can be read/written without synchronization,
add proper accessors and documentation.
Fixes:
d5dd88794a13 ("inet: fix various use-after-free in defrags units")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric W. Biederman [Mon, 3 Jan 2022 17:32:36 +0000 (11:32 -0600)]
taskstats: Cleanup the use of task->exit_code
commit
1b5a42d9c85f0e731f01c8d1129001fd8531a8a0 upstream.
In the function bacct_add_task the code reading task->exit_code was
introduced in commit
f3cef7a99469 ("[PATCH] csa: basic accounting over
taskstats"), and it is not entirely clear what the taskstats interface
is trying to return as only returning the exit_code of the first task
in a process doesn't make a lot of sense.
As best as I can figure the intent is to return task->exit_code after
a task exits. The field is returned with per task fields, so the
exit_code of the entire process is not wanted. Only the value of the
first task is returned so this is not a useful way to get the per task
ptrace stop code. The ordinary case of returning this value is
returning after a task exits, which also precludes use for getting
a ptrace value.
It is common to for the first task of a process to also be the last
task of a process so this field may have done something reasonable by
accident in testing.
Make ac_exitcode a reliable per task value by always returning it for
every exited task.
Setting ac_exitcode in a sensible mannter makes it possible to continue
to provide this value going forward.
Cc: Balbir Singh <bsingharora@gmail.com>
Fixes:
f3cef7a99469 ("[PATCH] csa: basic accounting over taskstats")
Link: https://lkml.kernel.org/r/20220103213312.9144-5-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael S. Tsirkin [Thu, 6 Jan 2022 12:57:46 +0000 (07:57 -0500)]
virtio_ring: mark ring unused on error
commit
1861ba626ae9b98136f3e504208cdef6b29cd3ec upstream.
A recently added error path does not mark ring unused when exiting on
OOM, which will lead to BUG on the next entry in debug builds.
TODO: refactor code so we have START_USE and END_USE in the same function.
Fixes:
fc6d70f40b3d ("virtio_ring: check desc == NULL when using indirect with packed")
Cc: "Xuan Zhuo" <xuanzhuo@linux.alibaba.com>
Cc: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eli Cohen [Thu, 30 Dec 2021 14:20:24 +0000 (16:20 +0200)]
vdpa/mlx5: Fix wrong configuration of virtio_version_1_0
commit
97143b70aa847f2b0a1f959dde126b76ff7b5376 upstream.
Remove overriding of virtio_version_1_0 which forced the virtqueue
object to version 1.
Fixes:
1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20211230142024.142979-1-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Laurence de Bruxelles [Sat, 1 Jan 2022 15:41:49 +0000 (15:41 +0000)]
rtc: pxa: fix null pointer dereference
commit
34127b3632b21e5c391756e724b1198eb9917981 upstream.
With the latest stable kernel versions the rtc on the PXA based
Zaurus does not work, when booting I see the following kernel messages:
pxa-rtc pxa-rtc: failed to find rtc clock source
pxa-rtc pxa-rtc: Unable to init SA1100 RTC sub-device
pxa-rtc: probe of pxa-rtc failed with error -2
hctosys: unable to open rtc device (rtc0)
I think this is because commit
f2997775b111 ("rtc: sa1100: fix possible
race condition") moved the allocation of the rtc_device struct out of
sa1100_rtc_init and into sa1100_rtc_probe. This means that pxa_rtc_probe
also needs to do allocation for the rtc_device struct, otherwise
sa1100_rtc_init will try to dereference a null pointer. This patch adds
that allocation by copying how sa1100_rtc_probe in
drivers/rtc/rtc-sa1100.c does it; after the IRQs are set up a managed
rtc_device is allocated.
I've tested this patch with `qemu-system-arm -machine akita` and with a
real Zaurus SL-C1000 applied to 4.19, 5.4, and 5.10.
Signed-off-by: Laurence de Bruxelles <lfdebrux@gmail.com>
Fixes:
f2997775b111 ("rtc: sa1100: fix possible race condition")
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220101154149.12026-1-lfdebrux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Torokhov [Fri, 7 Jan 2022 20:09:36 +0000 (12:09 -0800)]
HID: vivaldi: fix handling devices not using numbered reports
commit
3fe6acd4dc922237b30e55473c9349c6ce0690f3 upstream.
Unfortunately details of USB HID transport bled into HID core and
handling of numbered/unnumbered reports is quite a mess, with
hid_report_len() calculating the length according to USB rules,
and hid_hw_raw_request() adding report ID to the buffer for both
numbered and unnumbered reports.
Untangling it all requres a lot of changes in HID, so for now let's
handle this in the driver.
[jkosina@suse.cz: microoptimize field->report->id to report->id]
Fixes:
14c9c014babe ("HID: add vivaldi HID driver")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Stephen Boyd <swboyd@chromium.org> # CoachZ
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johannes Berg [Mon, 13 Sep 2021 08:17:29 +0000 (10:17 +0200)]
um: gitignore: Add kernel/capflags.c
commit
4b86366fdfbedec42f8f7ee037775f2839921d34 upstream.
This file is generated, we should ignore it.
Fixes:
d8fb32f4790f ("um: Add support for host CPU flags and alignment")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: anton.ivanov@cambridgegreys.com
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yury Norov [Sat, 14 Aug 2021 21:16:57 +0000 (14:16 -0700)]
bitops: protect find_first_{,zero}_bit properly
commit
b7ec62d7ee0f0b8af6ba190501dff7f9ee6545ca upstream.
find_first_bit() and find_first_zero_bit() are not protected with
ifdefs as other functions in find.h. It causes build errors on some
platforms if CONFIG_GENERIC_FIND_FIRST_BIT is enabled.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Fixes:
2cc7b6a44ac2 ("lib: add fast path for find_first_*_bit() and find_last_bit()")
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robert Hancock [Tue, 18 Jan 2022 21:41:32 +0000 (15:41 -0600)]
net: axienet: increase default TX ring size to 128
commit
2d19c3fd80178160dd505ccd7fed1643831227a5 upstream.
With previous changes to make the driver handle the TX ring size more
correctly, the default TX ring size of 64 appears to significantly
bottleneck TX performance to around 600 Mbps on a 1 Gbps link on ZynqMP.
Increasing this to 128 seems to bring performance up to near line rate and
shouldn't cause excess bufferbloat (this driver doesn't yet support modern
byte-based queue management).
Fixes:
8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robert Hancock [Tue, 18 Jan 2022 21:41:31 +0000 (15:41 -0600)]
net: axienet: fix for TX busy handling
commit
bb193e3db8b86a63f26889c99e14fd30c9ebd72a upstream.
Network driver documentation indicates we should be avoiding returning
NETDEV_TX_BUSY from ndo_start_xmit in normal cases, since it requires
the packets to be requeued. Instead the queue should be stopped after
a packet is added to the TX ring when there may not be enough room for an
additional one. Also, when TX ring entries are completed, we should only
wake the queue if we know there is room for another full maximally
fragmented packet.
Print a warning if there is insufficient space at the start of start_xmit,
since this should no longer happen.
Combined with increasing the default TX ring size (in a subsequent
patch), this appears to recover the TX performance lost by previous changes
to actually manage the TX ring state properly.
Fixes:
8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robert Hancock [Tue, 18 Jan 2022 21:41:30 +0000 (15:41 -0600)]
net: axienet: fix number of TX ring slots for available check
commit
aba57a823d2985a2cc8c74a2535f3a88e68d9424 upstream.
The check for the number of available TX ring slots was off by 1 since a
slot is required for the skb header as well as each fragment. This could
result in overwriting a TX ring slot that was still in use.
Fixes:
8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robert Hancock [Tue, 18 Jan 2022 21:41:29 +0000 (15:41 -0600)]
net: axienet: Fix TX ring slot available check
commit
996defd7f8b5dafc1d480b7585c7c62437f80c3c upstream.
The check for whether a TX ring slot was available was incorrect,
since a slot which had been loaded with transmit data but the device had
not started transmitting would be treated as available, potentially
causing non-transmitted slots to be overwritten. The control field in
the descriptor should be checked, rather than the status field (which may
only be updated when the device completes the entry).
Fixes:
8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robert Hancock [Tue, 18 Jan 2022 21:41:28 +0000 (15:41 -0600)]
net: axienet: limit minimum TX ring size
commit
70f5817deddbc6ef3faa35841cab83c280cc653a upstream.
The driver will not work properly if the TX ring size is set to below
MAX_SKB_FRAGS + 1 since it needs to hold at least one full maximally
fragmented packet in the TX ring. Limit setting the ring size to below
this value.
Fixes:
8b09ca823ffb4 ("net: axienet: Make RX/TX ring sizes configurable")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robert Hancock [Tue, 18 Jan 2022 21:41:27 +0000 (15:41 -0600)]
net: axienet: add missing memory barriers
commit
95978df6fa328df619c15312e65ece469c2be2d2 upstream.
This driver was missing some required memory barriers:
Use dma_rmb to ensure we see all updates to the descriptor after we see
that an entry has been completed.
Use wmb and rmb to avoid stale descriptor status between the TX path and
TX complete IRQ path.
Fixes:
8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robert Hancock [Tue, 18 Jan 2022 21:41:26 +0000 (15:41 -0600)]
net: axienet: reset core on initialization prior to MDIO access
commit
04cc2da39698efd7eb2e30c112538922d26f848e upstream.
In some cases where the Xilinx Ethernet core was used in 1000Base-X or
SGMII modes, which use the internal PCS/PMA PHY, and the MGT
transceiver clock source for the PCS was not running at the time the
FPGA logic was loaded, the core would come up in a state where the
PCS could not be found on the MDIO bus. To fix this, the Ethernet core
(including the PCS) should be reset after enabling the clocks, prior to
attempting to access the PCS using of_mdio_find_device.
Fixes:
1a02556086fc (net: axienet: Properly handle PCS/PMA PHY for 1000BaseX mode)
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robert Hancock [Tue, 18 Jan 2022 21:41:25 +0000 (15:41 -0600)]
net: axienet: Wait for PhyRstCmplt after core reset
commit
b400c2f4f4c53c86594dd57098970d97d488bfde upstream.
When resetting the device, wait for the PhyRstCmplt bit to be set
in the interrupt status register before continuing initialization, to
ensure that the core is actually ready. When using an external PHY, this
also ensures we do not start trying to access the PHY while it is still
in reset. The PHY reset is initiated by the core reset which is
triggered just above, but remains asserted for 5ms after the core is
reset according to the documentation.
The MgtRdy bit could also be waited for, but unfortunately when using
7-series devices, the bit does not appear to work as documented (it
seems to behave as some sort of link state indication and not just an
indication the transceiver is ready) so it can't really be relied on for
this purpose.
Fixes:
8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robert Hancock [Tue, 18 Jan 2022 21:41:24 +0000 (15:41 -0600)]
net: axienet: increase reset timeout
commit
2e5644b1bab2ccea9cfc7a9520af95b94eb0dbf1 upstream.
The previous timeout of 1ms was too short to handle some cases where the
core is reset just after the input clocks were started, which will
be introduced in an upcoming patch. Increase the timeout to 50ms. Also
simplify the reset timeout checking to use read_poll_timeout.
Fixes:
8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wen Gu [Sun, 16 Jan 2022 07:43:42 +0000 (15:43 +0800)]
net/smc: Fix hung_task when removing SMC-R devices
commit
56d99e81ecbc997a5f984684d0eeb583992b2072 upstream.
A hung_task is observed when removing SMC-R devices. Suppose that
a link group has two active links(lnk_A, lnk_B) associated with two
different SMC-R devices(dev_A, dev_B). When dev_A is removed, the
link group will be removed from smc_lgr_list and added into
lgr_linkdown_list. lnk_A will be cleared and smcibdev(A)->lnk_cnt
will reach to zero. However, when dev_B is removed then, the link
group can't be found in smc_lgr_list and lnk_B won't be cleared,
making smcibdev->lnk_cnt never reaches zero, which causes a hung_task.
This patch fixes this issue by restoring the implementation of
smc_smcr_terminate_all() to what it was before commit
349d43127dac
("net/smc: fix kernel panic caused by race of smc_sock"). The original
implementation also satisfies the intention that make sure QP destroy
earlier than CQ destroy because we will always wait for smcibdev->lnk_cnt
reaches zero, which guarantees QP has been destroyed.
Fixes:
349d43127dac ("net/smc: fix kernel panic caused by race of smc_sock")
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miaoqian Lin [Fri, 14 Jan 2022 06:51:24 +0000 (06:51 +0000)]
gpio: idt3243x: Fix IRQ check in idt_gpio_probe
commit
30fee1d7462a446ade399c0819717a830cbdca69 upstream.
platform_get_irq() returns negative error number instead 0 on failure.
And the doc of platform_get_irq() provides a usage example:
int irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
Fix the check of return value to catch errors correctly.
Fixes:
4195926aedca ("gpio: Add support for IDT 79RC3243x GPIO controller")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miaoqian Lin [Fri, 14 Jan 2022 06:48:20 +0000 (06:48 +0000)]
gpio: mpc8xxx: Fix IRQ check in mpc8xxx_probe
commit
0b39536cc699db6850c426db7f9cb45923de40c5 upstream.
platform_get_irq() returns negative error number instead 0 on failure.
And the doc of platform_get_irq() provides a usage example:
int irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
Fix the check of return value to catch errors correctly.
Fixes:
76c47d1449fc ("gpio: mpc8xxx: Add ACPI support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Keeping [Fri, 26 Nov 2021 15:13:52 +0000 (15:13 +0000)]
pinctrl/rockchip: fix gpio device creation
commit
bceb6732f3fd2a55d8f2e518cced1c7555e216b6 upstream.
GPIO nodes are not themselves busses, so passing rockchip_bank_match
here is wrong. Passing NULL instead uses the standard bus match table
which is more appropriate.
devm_of_platform_populate() shows that this is the normal way to call
of_platform_populate() from a device driver, so in order to match that
more closely also add the pinctrl device as the parent for the newly
created GPIO controllers.
Specifically, using the wrong match here can break dynamic GPIO hogs as
marking the GPIO bank as a bus means that of_platform_notify() will set
OF_POPULATED on new child nodes and if this happens before
of_gpio_notify() is called then the new hog will be skipped as
OF_POPULATED is already set.
Fixes:
9ce9a02039de ("pinctrl/rockchip: drop the gpio related codes")
Signed-off-by: John Keeping <john@metanate.com>
Link: https://lore.kernel.org/r/20211126151352.1509583-1-john@metanate.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robert Hancock [Wed, 12 Jan 2022 20:38:16 +0000 (14:38 -0600)]
clk: si5341: Fix clock HW provider cleanup
commit
49a8f2bc8d88702783c7e163ec84374e9a022f71 upstream.
The call to of_clk_add_hw_provider was not undone on remove or on probe
failure, which could cause an oops on a subsequent attempt to retrieve
clocks for the removed device. Switch to the devm version of the
function to avoid this issue.
Fixes:
3044a860fd09 ("clk: Add Si5341/Si5340 driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20220112203816.1784610-1-robert.hancock@calian.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephen Boyd [Fri, 10 Dec 2021 01:34:05 +0000 (17:34 -0800)]
clk: Emit a stern warning with writable debugfs enabled
commit
489a71964f9d74e697a12cd0ace20ed829eb1f93 upstream.
We don't want vendors to be enabling this part of the clk code and
shipping it to customers. Exposing the ability to change clk frequencies
and parents via debugfs is potentially damaging to the system if folks
don't know what they're doing. Emit a strong warning so that the message
is clear: don't enable this outside of development systems.
Fixes:
37215da5553e ("clk: Add support for setting clk_rate via debugfs")
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20211210014237.2130300-1-sboyd@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Fri, 14 Jan 2022 16:43:28 +0000 (08:43 -0800)]
af_unix: annote lockless accesses to unix_tot_inflight & gc_in_progress
commit
9d6d7f1cb67cdee15f1a0e85aacfb924e0e02435 upstream.
wait_for_unix_gc() reads unix_tot_inflight & gc_in_progress
without synchronization.
Adds READ_ONCE()/WRITE_ONCE() and their associated comments
to better document the intent.
BUG: KCSAN: data-race in unix_inflight / wait_for_unix_gc
write to 0xffffffff86e2b7c0 of 4 bytes by task 9380 on cpu 0:
unix_inflight+0x1e8/0x260 net/unix/scm.c:63
unix_attach_fds+0x10c/0x1e0 net/unix/scm.c:121
unix_scm_to_skb net/unix/af_unix.c:1674 [inline]
unix_dgram_sendmsg+0x679/0x16b0 net/unix/af_unix.c:1817
unix_seqpacket_sendmsg+0xcc/0x110 net/unix/af_unix.c:2258
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg net/socket.c:724 [inline]
____sys_sendmsg+0x39a/0x510 net/socket.c:2409
___sys_sendmsg net/socket.c:2463 [inline]
__sys_sendmmsg+0x267/0x4c0 net/socket.c:2549
__do_sys_sendmmsg net/socket.c:2578 [inline]
__se_sys_sendmmsg net/socket.c:2575 [inline]
__x64_sys_sendmmsg+0x53/0x60 net/socket.c:2575
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
read to 0xffffffff86e2b7c0 of 4 bytes by task 9375 on cpu 1:
wait_for_unix_gc+0x24/0x160 net/unix/garbage.c:196
unix_dgram_sendmsg+0x8e/0x16b0 net/unix/af_unix.c:1772
unix_seqpacket_sendmsg+0xcc/0x110 net/unix/af_unix.c:2258
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg net/socket.c:724 [inline]
____sys_sendmsg+0x39a/0x510 net/socket.c:2409
___sys_sendmsg net/socket.c:2463 [inline]
__sys_sendmmsg+0x267/0x4c0 net/socket.c:2549
__do_sys_sendmmsg net/socket.c:2578 [inline]
__se_sys_sendmmsg net/socket.c:2575 [inline]
__x64_sys_sendmmsg+0x53/0x60 net/socket.c:2575
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0x00000002 -> 0x00000004
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 9375 Comm: syz-executor.1 Not tainted 5.16.0-rc7-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes:
9915672d4127 ("af_unix: limit unix_tot_inflight")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20220114164328.2038499-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Sat, 27 Nov 2021 14:10:27 +0000 (17:10 +0300)]
crypto: octeontx2 - uninitialized variable in kvf_limits_store()
commit
0ea275df84c389e910a3575a9233075118c173ee upstream.
If kstrtoint() fails then "lfs_num" is uninitialized and the warning
doesn't make any sense. Just delete it.
Fixes:
8ec8015a3168 ("crypto: octeontx2 - add support to process the crypto request")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chao Yu [Sun, 12 Dec 2021 12:28:12 +0000 (20:28 +0800)]
f2fs: fix to check available space of CP area correctly in update_ckpt_flags()
commit
b702c83e2eaa2fa2d72e957c55c0321535cc8b9f upstream.
Otherwise, nat_bit area may be persisted across boundary of CP area during
nat_bit rebuilding.
Fixes:
94c821fb286b ("f2fs: rebuild nat_bits during umount")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chao Yu [Sat, 11 Dec 2021 13:27:36 +0000 (21:27 +0800)]
f2fs: fix to reserve space for IO align feature
commit
300a842937fbcfb5a189cea9ba15374fdb0b5c6b upstream.
https://bugzilla.kernel.org/show_bug.cgi?id=204137
With below script, we will hit panic during new segment allocation:
DISK=bingo.img
MOUNT_DIR=/mnt/f2fs
dd if=/dev/zero of=$DISK bs=1M count=105
mkfs.f2fe -a 1 -o 19 -t 1 -z 1 -f -q $DISK
mount -t f2fs $DISK $MOUNT_DIR -o "noinline_dentry,flush_merge,noextent_cache,mode=lfs,io_bits=7,fsync_mode=strict"
for (( i = 0; i < 4096; i++ )); do
name=`head /dev/urandom | tr -dc A-Za-z0-9 | head -c 10`
mkdir $MOUNT_DIR/$name
done
umount $MOUNT_DIR
rm $DISK
Hyeong-Jun Kim [Fri, 10 Dec 2021 04:30:12 +0000 (13:30 +0900)]
f2fs: compress: fix potential deadlock of compress file
commit
7377e853967ba45bf409e3b5536624d2cbc99f21 upstream.
There is a potential deadlock between writeback process and a process
performing write_begin() or write_cache_pages() while trying to write
same compress file, but not compressable, as below:
[Process A] - doing checkpoint
[Process B] [Process C]
f2fs_write_cache_pages()
- lock_page() [all pages in cluster, 0-31]
- f2fs_write_multi_pages()
- f2fs_write_raw_pages()
- f2fs_write_single_data_page()
- f2fs_do_write_data_page()
- return -EAGAIN [f2fs_trylock_op() failed]
- unlock_page(page) [e.g., page 0]
- generic_perform_write()
- f2fs_write_begin()
- f2fs_prepare_compress_overwrite()
- prepare_compress_overwrite()
- lock_page() [e.g., page 0]
- lock_page() [e.g., page 1]
- lock_page(page) [e.g., page 0]
Since there is no compress process, it is no longer necessary to hold
locks on every pages in cluster within f2fs_write_raw_pages().
This patch changes f2fs_write_raw_pages() to release all locks first
and then perform write same as the non-compress file in
f2fs_write_cache_pages().
Fixes:
4c8ff7095bef ("f2fs: support data compression")
Signed-off-by: Hyeong-Jun Kim <hj514.kim@samsung.com>
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Youngjin Gil <youngjin.gil@samsung.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chao Yu [Mon, 6 Dec 2021 14:44:20 +0000 (22:44 +0800)]
f2fs: fix to avoid panic in is_alive() if metadata is inconsistent
commit
f6db43076d190d9bf75559dec28e18b9d12e4ce5 upstream.
As report by Wenqing Liu in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=215231
If we enable CONFIG_F2FS_CHECK_FS config, and with fuzzed image attached
in above link, we will encounter panic when executing below script:
1. mkdir mnt
2. mount -t f2fs tmp1.img mnt
3. touch tmp
F2FS-fs (loop11): mismatched blkaddr 5765 (source_blkaddr 1) in seg 3
kernel BUG at fs/f2fs/gc.c:1042!
do_garbage_collect+0x90f/0xa80 [f2fs]
f2fs_gc+0x294/0x12a0 [f2fs]
f2fs_balance_fs+0x2c5/0x7d0 [f2fs]
f2fs_create+0x239/0xd90 [f2fs]
lookup_open+0x45e/0xa90
open_last_lookups+0x203/0x670
path_openat+0xae/0x490
do_filp_open+0xbc/0x160
do_sys_openat2+0x2f1/0x500
do_sys_open+0x5e/0xa0
__x64_sys_openat+0x28/0x40
Previously, f2fs tries to catch data inconcistency exception in between
SSA and SIT table during GC, however once the exception is caught, it will
call f2fs_bug_on to hang kernel, it's not needed, instead, let's set
SBI_NEED_FSCK flag and skip migrating current block.
Fixes:
bbf9f7d90f21 ("f2fs: Fix indefinite loop in f2fs_gc()")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fengnan Chang [Fri, 26 Nov 2021 10:19:19 +0000 (18:19 +0800)]
f2fs: fix remove page failed in invalidate compress pages
commit
d1917865a7906baf6b687e15e8e6195a295a3992 upstream.
Since compress inode not a regular file, generic_error_remove_page in
f2fs_invalidate_compress_pages will always be failed, set compress
inode as a regular file to fix it.
Fixes:
6ce19aff0b8c ("f2fs: compress: add compress_inode to cache compressed blocks")
Signed-off-by: Fengnan Chang <changfengnan@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zack Rusin [Wed, 15 Dec 2021 18:41:47 +0000 (13:41 -0500)]
drm/vmwgfx: Remove unused compile options
commit
50ca8cc7c0fdd9ab16b8b66ffb301fface101fac upstream.
Before the driver had screen targets support we had to disable explicit
bringup of its infrastructure because it was breaking screen objects
support.
Since the implementation of screen targets landed there hasn't been a
reason to explicitly disable it and the options were never used.
Remove of all that unused code.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes:
d80efd5cb3de ("drm/vmwgfx: Initial DX support")
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211215184147.3688785-3-zack@kde.org
(cherry picked from commit
11343099d5ae6c7411da1425b6b162c89fb5bf10)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zack Rusin [Wed, 15 Dec 2021 18:41:46 +0000 (13:41 -0500)]
drm/vmwgfx: Remove explicit transparent hugepages support
commit
bc701a28c74e78d7b5aa2b8628cb3608d4785d14 upstream.
Old versions of the svga device used to export virtual vram, handling of
which was optimized on top of transparent hugepages support. Only very
old devices (OpenGL 2.1 support and earlier) used this code and at this
point performance differences are negligible.
Because the code requires very old hardware versions to run it has
been largely untested and unused for a long time.
Furthermore removal of the ttm hugepages support in:
commit
0d979509539e ("drm/ttm: remove ttm_bo_vm_insert_huge()")
broke the coherency mode in vmwgfx when running with hugepages.
Fixes:
0d979509539e ("drm/ttm: remove ttm_bo_vm_insert_huge()")
Signed-off-by: Zack Rusin <zackr@vmware.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211215184147.3688785-2-zack@kde.org
(cherry picked from commit
49d535d64d52945e2c874f380705675e20a02b6a)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geert Uytterhoeven [Fri, 17 Dec 2021 12:49:24 +0000 (13:49 +0100)]
riscv: dts: microchip: mpfs: Drop empty chosen node
commit
53ef07326ad0d6ae7fefded22bc53b427d542761 upstream.
It does not make sense to have an (empty) chosen node in an SoC-specific
.dtsi, as chosen is meant for system-specific configuration.
It is already provided in microchip-mpfs-icicle-kit.dts anyway.
Fixes:
0fa6107eca4186ad ("RISC-V: Initial DTS for Microchip ICICLE board")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miaoqian Lin [Thu, 20 Jan 2022 12:18:12 +0000 (12:18 +0000)]
parisc: pdc_stable: Fix memory leak in pdcs_register_pathentries
commit
d24846a4246b6e61ecbd036880a4adf61681d241 upstream.
kobject_init_and_add() takes reference even when it fails.
According to the doc of kobject_init_and_add():
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object.
Fix memory leak by calling kobject_put().
Fixes:
73f368cf679b ("Kobject: change drivers/parisc/pdc_stable.c to use kobject_init_and_add")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobias Waldekranz [Tue, 18 Jan 2022 21:50:53 +0000 (22:50 +0100)]
net/fsl: xgmac_mdio: Fix incorrect iounmap when removing module
commit
3f7c239c7844d2044ed399399d97a5f1c6008e1b upstream.
As reported by sparse: In the remove path, the driver would attempt to
unmap its own priv pointer - instead of the io memory that it mapped
in probe.
Fixes:
9f35a7342cff ("net/fsl: introduce Freescale 10G MDIO driver")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobias Waldekranz [Tue, 18 Jan 2022 21:50:50 +0000 (22:50 +0100)]
net/fsl: xgmac_mdio: Add workaround for erratum A-009885
commit
6198c722019774d38018457a8bfb9ba3ed8c931e upstream.
Once an MDIO read transaction is initiated, we must read back the data
register within 16 MDC cycles after the transaction completes. Outside
of this window, reads may return corrupt data.
Therefore, disable local interrupts in the critical section, to
maximize the probability that we can satisfy this requirement.
Fixes:
d55ad2967d89 ("powerpc/mpc85xx: Create dts components for the FSL QorIQ DPAA FMan")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guillaume Nault [Mon, 10 Jan 2022 13:43:14 +0000 (14:43 +0100)]
mlx5: Don't accidentally set RTO_ONLINK before mlx5e_route_lookup_ipv4_get()
commit
48d67543e01d73292e0bb66d3f10fc422e79e031 upstream.
Mask the ECN bits before calling mlx5e_route_lookup_ipv4_get(). The
tunnel key might have the last ECN bit set. This interferes with the
route lookup process as ip_route_output_key_hash() interpretes this bit
specially (to restrict the route scope).
Found by code inspection, compile tested only.
Fixes:
c7b9038d8af6 ("net/mlx5e: TC preparation refactoring for routing update event")
Fixes:
9a941117fb76 ("net/mlx5e: Maximize ip tunnel key usage on the TC offloading path")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Wed, 19 Jan 2022 10:04:12 +0000 (02:04 -0800)]
ipv4: avoid quadratic behavior in netns dismantle
commit
d07418afea8f1d9896aaf9dc5ae47ac4f45b220c upstream.
net/ipv4/fib_semantics.c uses an hash table of 256 slots,
keyed by device ifindexes: fib_info_devhash[DEVINDEX_HASHSIZE]
Problem is that with network namespaces, devices tend
to use the same ifindex.
lo device for instance has a fixed ifindex of one,
for all network namespaces.
This means that hosts with thousands of netns spend
a lot of time looking at some hash buckets with thousands
of elements, notably at netns dismantle.
Simply add a per netns perturbation (net_hash_mix())
to spread elements more uniformely.
Also change fib_devindex_hashfn() to use more entropy.
Fixes:
aa79e66eee5d ("net: Make ifindex generation per-net namespace")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Sun, 16 Jan 2022 09:02:20 +0000 (01:02 -0800)]
ipv4: update fib_info_cnt under spinlock protection
commit
0a6e6b3c7db6c34e3d149f09cd714972f8753e3f upstream.
In the past, free_fib_info() was supposed to be called
under RTNL protection.
This eventually was no longer the case.
Instead of enforcing RTNL it seems we simply can
move fib_info_cnt changes to occur when fib_info_lock
is held.
v2: David Laight suggested to update fib_info_cnt
only when an entry is added/deleted to/from the hash table,
as fib_info_cnt is used to make sure hash table size
is optimal.
BUG: KCSAN: data-race in fib_create_info / free_fib_info
write to 0xffffffff86e243a0 of 4 bytes by task 26429 on cpu 0:
fib_create_info+0xe78/0x3440 net/ipv4/fib_semantics.c:1428
fib_table_insert+0x148/0x10c0 net/ipv4/fib_trie.c:1224
fib_magic+0x195/0x1e0 net/ipv4/fib_frontend.c:1087
fib_add_ifaddr+0xd0/0x2e0 net/ipv4/fib_frontend.c:1109
fib_netdev_event+0x178/0x510 net/ipv4/fib_frontend.c:1466
notifier_call_chain kernel/notifier.c:83 [inline]
raw_notifier_call_chain+0x53/0xb0 kernel/notifier.c:391
__dev_notify_flags+0x1d3/0x3b0
dev_change_flags+0xa2/0xc0 net/core/dev.c:8872
do_setlink+0x810/0x2410 net/core/rtnetlink.c:2719
rtnl_group_changelink net/core/rtnetlink.c:3242 [inline]
__rtnl_newlink net/core/rtnetlink.c:3396 [inline]
rtnl_newlink+0xb10/0x13b0 net/core/rtnetlink.c:3506
rtnetlink_rcv_msg+0x745/0x7e0 net/core/rtnetlink.c:5571
netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2496
rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5589
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x5fc/0x6c0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x726/0x840 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg net/socket.c:724 [inline]
____sys_sendmsg+0x39a/0x510 net/socket.c:2409
___sys_sendmsg net/socket.c:2463 [inline]
__sys_sendmsg+0x195/0x230 net/socket.c:2492
__do_sys_sendmsg net/socket.c:2501 [inline]
__se_sys_sendmsg net/socket.c:2499 [inline]
__x64_sys_sendmsg+0x42/0x50 net/socket.c:2499
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
read to 0xffffffff86e243a0 of 4 bytes by task 31505 on cpu 1:
free_fib_info+0x35/0x80 net/ipv4/fib_semantics.c:252
fib_info_put include/net/ip_fib.h:575 [inline]
nsim_fib4_rt_destroy drivers/net/netdevsim/fib.c:294 [inline]
nsim_fib4_rt_replace drivers/net/netdevsim/fib.c:403 [inline]
nsim_fib4_rt_insert drivers/net/netdevsim/fib.c:431 [inline]
nsim_fib4_event drivers/net/netdevsim/fib.c:461 [inline]
nsim_fib_event drivers/net/netdevsim/fib.c:881 [inline]
nsim_fib_event_work+0x15ca/0x2cf0 drivers/net/netdevsim/fib.c:1477
process_one_work+0x3fc/0x980 kernel/workqueue.c:2298
process_scheduled_works kernel/workqueue.c:2361 [inline]
worker_thread+0x7df/0xa70 kernel/workqueue.c:2447
kthread+0x2c7/0x2e0 kernel/kthread.c:327
ret_from_fork+0x1f/0x30
value changed: 0x00000d2d -> 0x00000d2e
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 31505 Comm: kworker/1:21 Not tainted 5.16.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events nsim_fib_event_work
Fixes:
48bb9eb47b27 ("netdevsim: fib: Add dummy implementation for FIB offload")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Ido Schimmel <idosch@mellanox.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
German Gomez [Tue, 18 Jan 2022 14:40:54 +0000 (14:40 +0000)]
perf evsel: Override attr->sample_period for non-libpfm4 events
commit
3606c0e1a1050d397ad759a62607e419fd8b0ccb upstream.
A previous patch preventing "attr->sample_period" values from being
overridden in pfm events changed a related behaviour in arm-spe.
Before said patch:
perf record -c 10000 -e arm_spe_0// -- sleep 1
Would yield an SPE event with period=10000. After the patch, the period
in "-c 10000" was being ignored because the arm-spe code initializes
sample_period to a non-zero value.
This patch restores the previous behaviour for non-libpfm4 events.
Fixes:
ae5dcc8abe31 (“perf record: Prevent override of attr->sample_period for libpfm4 events”)
Reported-by: Chase Conklin <chase.conklin@arm.com>
Signed-off-by: German Gomez <german.gomez@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20220118144054.2541-1-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Borkmann [Fri, 14 Jan 2022 13:58:36 +0000 (13:58 +0000)]
bpf: Mark PTR_TO_FUNC register initially with zero offset
commit
d400a6cf1c8a57cdf10f35220ead3284320d85ff upstream.
Similar as with other pointer types where we use ldimm64, clear the register
content to zero first, and then populate the PTR_TO_FUNC type and subprogno
number. Currently this is not done, and leads to reuse of stale register
tracking data.
Given for special ldimm64 cases we always clear the register offset, make it
common for all cases, so it won't be forgotten in future.
Fixes:
69c087ba6225 ("bpf: Add bpf_for_each_map_elem() helper")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yafang Shao [Sat, 8 Jan 2022 13:46:23 +0000 (13:46 +0000)]
bpf: Fix mount source show for bpffs
commit
1e9d74660d4df625b0889e77018f9e94727ceacd upstream.
We noticed our tc ebpf tools can't start after we upgrade our in-house kernel
version from 4.19 to 5.10. That is because of the behaviour change in bpffs
caused by commit
d2935de7e4fd ("vfs: Convert bpf to use the new mount API").
In our tc ebpf tools, we do strict environment check. If the environment is
not matched, we won't allow to start the ebpf progs. One of the check is whether
bpffs is properly mounted. The mount information of bpffs in kernel-4.19 and
kernel-5.10 are as follows:
- kernel 4.19
$ mount -t bpf bpffs /sys/fs/bpf
$ mount -t bpf
bpffs on /sys/fs/bpf type bpf (rw,relatime)
- kernel 5.10
$ mount -t bpf bpffs /sys/fs/bpf
$ mount -t bpf
none on /sys/fs/bpf type bpf (rw,relatime)
The device name in kernel-5.10 is displayed as none instead of bpffs, then our
environment check fails. Currently we modify the tools to adopt to the kernel
behaviour change, but I think we'd better change the kernel code to keep the
behavior consistent.
After this change, the mount information will be displayed the same with the
behavior in kernel-4.19, for example:
$ mount -t bpf bpffs /sys/fs/bpf
$ mount -t bpf
bpffs on /sys/fs/bpf type bpf (rw,relatime)
Fixes:
d2935de7e4fd ("vfs: Convert bpf to use the new mount API")
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/bpf/20220108134623.32467-1-laoar.shao@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Toke Høiland-Jørgensen [Fri, 7 Jan 2022 22:11:13 +0000 (23:11 +0100)]
xdp: check prog type before updating BPF link
commit
382778edc8262b7535f00523e9eb22edba1b9816 upstream.
The bpf_xdp_link_update() function didn't check the program type before
updating the program, which made it possible to install any program type as
an XDP program, which is obviously not good. Syzbot managed to trigger this
by swapping in an LWT program on the XDP hook which would crash in a helper
call.
Fix this by adding a check and bailing out if the types don't match.
Fixes:
026a4c28e1db ("bpf, xdp: Implement LINK_UPDATE for BPF XDP link")
Reported-by: syzbot+983941aa85af6ded1fd9@syzkaller.appspotmail.com
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20220107221115.326171-1-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quentin Monnet [Wed, 10 Nov 2021 11:46:30 +0000 (11:46 +0000)]
bpftool: Fix indent in option lists in the documentation
commit
986dec18bbf41f50edc2e0aa4ac5ef8e0f64f328 upstream.
Mixed indentation levels in the lists of options in bpftool's
documentation produces some unexpected results. For the "bpftool" man
page, it prints a warning:
$ make -C bpftool.8
GEN bpftool.8
<stdin>:26: (ERROR/3) Unexpected indentation.
For other pages, there is no warning, but it results in a line break
appearing in the option lists in the generated man pages.
RST paragraphs should have a uniform indentation level. Let's fix it.
Fixes:
c07ba629df97 ("tools: bpftool: Update and synchronise option list in doc and help msg")
Fixes:
8cc8c6357c8f ("tools: bpftool: Document and add bash completion for -L, -B options")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211110114632.24537-5-quentin@isovalent.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quentin Monnet [Wed, 10 Nov 2021 11:46:28 +0000 (11:46 +0000)]
bpftool: Remove inclusion of utilities.mak from Makefiles
commit
48f5aef4c458c19ab337eed8c95a6486cc014aa3 upstream.
Bpftool's Makefile, and the Makefile for its documentation, both include
scripts/utilities.mak, but they use none of the items defined in this
file. Remove the includes.
Fixes:
71bb428fe2c1 ("tools: bpf: add bpftool")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211110114632.24537-3-quentin@isovalent.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maxime Ripard [Mon, 25 Oct 2021 14:11:07 +0000 (16:11 +0200)]
drm/vc4: crtc: Copy assigned channel to the CRTC
commit
eeb6ab4639590130d25670204ab7b6011333d685 upstream.
Accessing the crtc->state pointer from outside the modesetting context
is not allowed. We thus need to copy whatever we need from the KMS state
to our structure in order to access it.
In VC4, a number of users of that pointers have crept in over the years,
and the previous commits removed them all but the HVS channel a CRTC has
been assigned.
Let's move this channel in struct vc4_crtc at atomic_begin() time, drop
it from our private state structure, and remove our use of crtc->state
from our vblank handler entirely.
Link: https://lore.kernel.org/all/YWgteNaNeaS9uWDe@phenom.ffwll.local/
Link: https://lore.kernel.org/r/20211025141113.702757-4-maxime@cerno.tech
Fixes:
87ebcd42fb7b ("drm/vc4: crtc: Assign output to channel automatically")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maxime Ripard [Mon, 25 Oct 2021 14:11:06 +0000 (16:11 +0200)]
drm/vc4: Fix non-blocking commit getting stuck forever
commit
0c250c150c74a90db298bf2a8bcd0a1dabed2e2f upstream.
In some situation, we can end up being stuck on a non-blocking that went
through properly.
The situation that seems to trigger it reliably is to first start a
non-blocking commit, and then right after, and before we had any vblank
interrupt), start a blocking commit.
This will lead to the first commit workqueue to be scheduled, setup the
display, while the second commit is waiting for the first one to be
completed.
The vblank interrupt will then be raised, vc4_crtc_handle_vblank() will
run and will compare the active dlist in the HVS channel to the one
associated with the crtc->state.
However, at that point, the second commit is waiting using
drm_atomic_helper_wait_for_dependencies that occurs after
drm_atomic_helper_swap_state has been called, so crtc->state points to
the second commit state. vc4_crtc_handle_vblank() will compare the two
dlist addresses and since they don't match will ignore the interrupt.
The vblank event will never be reported, and the first and second commit
will wait for the first commit completion until they timeout.
The underlying reason is that it was never safe to do so. Indeed,
accessing the ->state pointer access synchronization is based on
ownership guarantees that can only occur within the functions and hooks
defined as part of the KMS framework, and obviously the irq handler
isn't one of them. The rework to move to generic helpers only uncovered
the underlying issue.
However, since the code path between
drm_atomic_helper_wait_for_dependencies() and
drm_atomic_helper_wait_for_vblanks() is serialised and we can't get two
commits in that path at the same time, we can work around this issue by
setting a variable associated to struct drm_crtc to the dlist we expect,
and then using it from the vc4_crtc_handle_vblank() function.
Since that state is shared with the modesetting path, we also need to
introduce a spinlock to protect the code shared between the interrupt
handler and the modesetting path, protecting only our new variable for
now.
Link: https://lore.kernel.org/all/YWgteNaNeaS9uWDe@phenom.ffwll.local/
Link: https://lore.kernel.org/r/20211025141113.702757-3-maxime@cerno.tech
Fixes:
56d1fe0979dc ("drm/vc4: Make pageflip completion handling more robust.")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maxime Ripard [Mon, 25 Oct 2021 14:11:05 +0000 (16:11 +0200)]
drm/vc4: crtc: Drop feed_txp from state
commit
a16c66401fd831f70a02d33e9bcaac585637c29f upstream.
Accessing the crtc->state pointer from outside the modesetting context
is not allowed. We thus need to copy whatever we need from the KMS state
to our structure in order to access it.
In VC4, a number of users of that pointers have crept in over the years,
the first one being whether or not the downstream controller of the
pixelvalve is our writeback controller.
Fortunately for us, Since commit
39fcb2808376 ("drm/vc4: txp: Turn the
TXP into a CRTC of its own") this is no longer something that can change
from one commit to the other and is hardcoded.
Let's set this flag in struct vc4_crtc if we happen to be the TXP, and
drop the flag from our private state structure.
Link: https://lore.kernel.org/all/YWgteNaNeaS9uWDe@phenom.ffwll.local/
Link: https://lore.kernel.org/r/20211025141113.702757-2-maxime@cerno.tech
Fixes:
008095e065a8 ("drm/vc4: Add support for the transposer block")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ye Bin [Mon, 29 Nov 2021 01:26:59 +0000 (09:26 +0800)]
block: Fix fsync always failed if once failed
commit
8a7518931baa8ea023700987f3db31cb0a80610b upstream.
We do test with inject error fault base on v4.19, after test some time we found
sync /dev/sda always failed.
[root@localhost] sync /dev/sda
sync: error syncing '/dev/sda': Input/output error
scsi log as follows:
[19069.812296] sd 0:0:0:0: [sda] tag#64 Send: scmd 0x00000000d03a0b6b
[19069.812302] sd 0:0:0:0: [sda] tag#64 CDB: Synchronize Cache(10) 35 00 00 00 00 00 00 00 00 00
[19069.812533] sd 0:0:0:0: [sda] tag#64 Done: SUCCESS Result: hostbyte=DID_OK driverbyte=DRIVER_OK
[19069.812536] sd 0:0:0:0: [sda] tag#64 CDB: Synchronize Cache(10) 35 00 00 00 00 00 00 00 00 00
[19069.812539] sd 0:0:0:0: [sda] tag#64 scsi host busy 1 failed 0
[19069.812542] sd 0:0:0:0: Notifying upper driver of completion (result 0)
[19069.812546] sd 0:0:0:0: [sda] tag#64 sd_done: completed 0 of 0 bytes
[19069.812549] sd 0:0:0:0: [sda] tag#64 0 sectors total, 0 bytes done.
[19069.812564] print_req_error: I/O error, dev sda, sector 0
ftrace log as follows:
rep-306069 [007] .... 19654.923315: block_bio_queue: 8,0 FWS 0 + 0 [rep]
rep-306069 [007] .... 19654.923333: block_getrq: 8,0 FWS 0 + 0 [rep]
kworker/7:1H-250 [007] .... 19654.923352: block_rq_issue: 8,0 FF 0 () 0 + 0 [kworker/7:1H]
<idle>-0 [007] ..s. 19654.923562: block_rq_complete: 8,0 FF ()
18446744073709551615 + 0 [0]
<idle>-0 [007] d.s. 19654.923576: block_rq_complete: 8,0 WS () 0 + 0 [-5]
As
8d6996630c03 introduce 'fq->rq_status', this data only update when 'flush_rq'
reference count isn't zero. If flush request once failed and record error code
in 'fq->rq_status'. If there is no chance to update 'fq->rq_status',then do fsync
will always failed.
To address this issue reset 'fq->rq_status' after return error code to upper layer.
Fixes:
8d6996630c03("block: fix null pointer dereference in blk_mq_rq_timed_out()")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20211129012659.1553733-1-yebin10@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jens Axboe [Thu, 20 Jan 2022 17:28:13 +0000 (10:28 -0700)]
block: fix async_depth sysfs interface for mq-deadline
commit
46cdc45acb089c811d9a54fd50af33b96e5fae9d upstream.
A previous commit added this feature, but it inadvertently used the wrong
variable to show/store the setting from/to, victimized by copy/paste. Fix
it up so that the async_depth sysfs interface reads and writes from the
right setting.
Fixes:
07757588e507 ("block/mq-deadline: Reserve 25% of scheduler tags for synchronous requests")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215485
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobias Waldekranz [Tue, 18 Jan 2022 21:50:52 +0000 (22:50 +0100)]
powerpc/fsl/dts: Enable WA for erratum A-009885 on fman3l MDIO buses
commit
0d375d610fa96524e2ee2b46830a46a7bfa92a9f upstream.
This block is used in (at least) T1024 and T1040, including their
variants like T1023 etc.
Fixes:
d55ad2967d89 ("powerpc/mpc85xx: Create dts components for the FSL QorIQ DPAA FMan")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anders Roxell [Tue, 7 Dec 2021 11:02:28 +0000 (12:02 +0100)]
powerpc/cell: Fix clang -Wimplicit-fallthrough warning
commit
e89257e28e844f5d1d39081bb901d9f1183a7705 upstream.
Clang warns:
arch/powerpc/platforms/cell/pervasive.c:81:2: error: unannotated fall-through between switch labels
case SRR1_WAKEEE:
^
arch/powerpc/platforms/cell/pervasive.c:81:2: note: insert 'break;' to avoid fall-through
case SRR1_WAKEEE:
^
break;
1 error generated.
Clang is more pedantic than GCC, which does not warn when failing
through to a case that is just break or return. Clang's version is more
in line with the kernel's own stance in deprecated.rst. Add athe missing
break to silence the warning.
Fixes:
6e83985b0f6e ("powerpc/cbe: Do not process external or decremeter interrupts from sreset")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211207110228.698956-1-anders.roxell@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Moshe Shemesh [Sun, 5 Dec 2021 09:20:59 +0000 (11:20 +0200)]
Revert "net/mlx5: Add retry mechanism to the command entry index allocation"
commit
4f6626b0e140867fd6d5a2e9d4ceaef97f10f46a upstream.
This reverts commit
410bd754cd73c4a2ac3856d9a03d7b08f9c906bf.
The reverted commit had added a retry mechanism to the command entry
index allocation. The previous patch ensures that there is a free
command entry index once the command work handler holds the command
semaphore. Thus the retry mechanism is not needed.
Fixes:
410bd754cd73 ("net/mlx5: Add retry mechanism to the command entry index allocation")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amelie Delaunay [Mon, 20 Dec 2021 16:58:27 +0000 (17:58 +0100)]
dmaengine: stm32-mdma: fix STM32_MDMA_CTBR_TSEL_MASK
commit
e7f110889a87307fb0fed408a5dee1707796ca04 upstream.
This patch fixes STM32_MDMA_CTBR_TSEL_MASK, which is [5:0], not [7:0].
Fixes:
a4ffb13c8946 ("dmaengine: Add STM32 MDMA driver")
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20211220165827.1238097-1-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chengguang Xu [Sat, 18 Dec 2021 11:23:20 +0000 (19:23 +0800)]
RDMA/rxe: Fix a typo in opcode name
commit
8d1cfb884e881efd69a3be4ef10772c71cb22216 upstream.
There is a redundant ']' in the name of opcode IB_OPCODE_RC_SEND_MIDDLE,
so just fix it.
Fixes:
8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20211218112320.3558770-1-cgxu519@mykernel.net
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yixing Liu [Mon, 6 Dec 2021 13:36:52 +0000 (21:36 +0800)]
RDMA/hns: Modify the mapping attribute of doorbell to device
commit
39d5534b1302189c809e90641ffae8cbdc42a8fc upstream.
It is more general for ARM device drivers to use the device attribute to
map PCI BAR spaces.
Fixes:
9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver")
Link: https://lore.kernel.org/r/20211206133652.27476-1-liangwenpeng@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Jiang [Tue, 14 Dec 2021 20:15:17 +0000 (13:15 -0700)]
dmaengine: idxd: fix wq settings post wq disable
commit
0f225705cf6536826318180831e18a74595efc8d upstream.
By the spec, wq size and group association is not changeable unless device
is disabled. Exclude clearing the shadow copy on wq disable/reset. This
allows wq type to be changed after disable to be re-enabled.
Move the size and group association to its own cleanup and only call it
during device disable.
Fixes:
0dcfe41e9a4c ("dmanegine: idxd: cleanup all device related bits after disabling device")
Reported-by: Lucas Van <lucas.van@intel.com>
Tested-by: Lucas Van <lucas.van@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163951291732.2987775.13576571320501115257.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kunihiko Hayashi [Tue, 14 Dec 2021 04:42:43 +0000 (13:42 +0900)]
dmaengine: uniphier-xdmac: Fix type of address variables
commit
105a8c525675bb7d4d64871f9b2edf39460de881 upstream.
The variables src_addr and dst_addr handle DMA addresses, so these should
be declared as dma_addr_t.
Fixes:
667b9251440b ("dmaengine: uniphier-xdmac: Add UniPhier external DMA controller driver")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/1639456963-10232-1-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Håkon Bugge [Tue, 23 Nov 2021 10:06:18 +0000 (11:06 +0100)]
RDMA/cma: Remove open coding of overflow checking for private_data_len
commit
8d0d2b0f41b1b2add8a30dbd816051a964efa497 upstream.
The existing tests are a little hard to comprehend. Use
check_add_overflow() instead.
Fixes:
04ded1672402 ("RDMA/cma: Verify private data length")
Link: https://lore.kernel.org/r/1637661978-18770-1-git-send-email-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miaoqian Lin [Wed, 22 Dec 2021 07:09:30 +0000 (07:09 +0000)]
scsi: ufs: ufs-mediatek: Fix error checking in ufs_mtk_init_va09_pwr_ctrl()
commit
3ba880a12df5aa4488c18281701b5b1bc3d4531a upstream.
The function regulator_get() returns an error pointer. Use IS_ERR() to
validate the return value.
Link: https://lore.kernel.org/r/20211222070930.9449-1-linmq006@gmail.com
Fixes:
cf137b3ea49a ("scsi: ufs-mediatek: Support VA09 regulator operations")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bart Van Assche [Mon, 29 Nov 2021 19:46:00 +0000 (11:46 -0800)]
scsi: core: Show SCMD_LAST in text form
commit
3369046e54ca8f82e0cb17740643da2d80d3cfa8 upstream.
The SCSI debugfs code supports showing information about pending commands,
including translating SCSI command flags from numeric into text format.
Also convert the SCMD_LAST flag from numeric into text form.
Link: https://lore.kernel.org/r/20211129194609.3466071-4-bvanassche@acm.org
Fixes:
8930a6c20791 ("scsi: core: add support for request batching")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Luiz Augusto von Dentz [Mon, 1 Nov 2021 22:14:41 +0000 (15:14 -0700)]
Bluetooth: hci_sync: Fix not setting adv set duration
commit
f16a491c65d9eb19398b25aefc10c2d3313d17b3 upstream.
10bbffa3e88e attempted to fix the use of rotation duration as
advertising duration but it didn't change the if condition which still
uses the duration instead of the timeout.
Fixes:
10bbffa3e88e ("Bluetooth: Fix using advertising instance duration as timeout")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Markus Reichl [Thu, 13 Jan 2022 20:01:11 +0000 (21:01 +0100)]
net: usb: Correct reset handling of smsc95xx
commit
0bf3885324a8599e3af4c7379b8d4f621c9bbffa upstream.
On boards with LAN9514 and no preconfigured MAC address we don't get an
ip address from DHCP after commit
a049a30fc27c ("net: usb: Correct PHY handling
of smsc95xx") anymore. Adding an explicit reset before starting the phy
fixes the issue.
[1]
https://lore.kernel.org/netdev/
199eebbd6b97f52b9119c9fa4fd8504f8a34de18.camel@collabora.com/
From: Gabriel Hojda <ghojda@yo2urs.ro>
Fixes:
a049a30fc27c ("net: usb: Correct PHY handling of smsc95xx")
Signed-off-by: Gabriel Hojda <ghojda@yo2urs.ro>
Signed-off-by: Markus Reichl <m.reichl@fivetechno.de>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Chen [Mon, 6 Dec 2021 17:33:43 +0000 (01:33 +0800)]
Bluetooth: btusb: Return error code when getting patch status failed
commit
995d948cf2e45834275f07afc1c9881a9902e73c upstream.
If there are failure cases in getting patch status, it should return the
error code (-EIO).
Fixes:
fc342c4dc4087 ("Bluetooth: btusb: Add protocol support for MediaTek MT7921U USB devices")
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Mark Chen <mark-yw.chen@mediatek.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Randy Dunlap [Wed, 19 Jan 2022 03:39:05 +0000 (19:39 -0800)]
Documentation: fix firewire.rst ABI file path error
commit
b0ac702f3329cdc8a06dcaac73183d4b5a2b942d upstream.
Adjust the path of the ABI files for firewire.rst to prevent a
documentation build error. Prevents this problem:
Sphinx parallel build error:
docutils.utils.SystemMessage: Documentation/driver-api/firewire.rst:22: (SEVERE/4) Problems with "include" directive path:
InputError: [Errno 2] No such file or directory: '../Documentation/driver-api/ABI/stable/firewire-cdev'.
Fixes:
2f4830ef96d2 ("FireWire: add driver-api Introduction section")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/20220119033905.4779-1-rdunlap@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lukas Bulwahn [Thu, 30 Dec 2021 17:19:40 +0000 (18:19 +0100)]
Documentation: refer to config RANDOMIZE_BASE for kernel address-space randomization
commit
82ca67321f55a8d1da6ac3ed611da3c32818bb37 upstream.
The config RANDOMIZE_SLAB does not exist, the authors probably intended to
refer to the config RANDOMIZE_BASE, which provides kernel address-space
randomization. They probably just confused SLAB with BASE (these two
four-letter words coincidentally share three common letters), as they also
point out the config SLAB_FREELIST_RANDOM as further randomization within
the same sentence.
Fix the reference of the config for kernel address-space randomization to
the config that provides that.
Fixes:
6e88559470f5 ("Documentation: Add section about CPU vulnerabilities for Spectre")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20211230171940.27558-1-lukas.bulwahn@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexandre Ghiti [Thu, 16 Dec 2021 09:44:23 +0000 (10:44 +0100)]
Documentation, arch: Remove leftovers from CIFS_WEAK_PW_HASH
commit
2ac7069ad7647cd1d9ca5b08765a1e116e13cdc4 upstream.
This config was removed so remove all references to it.
Fixes:
76a3c92ec9e0 ("cifs: remove support for NTLM and weaker authentication algorithms")
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Reviewed-by: Steve French <smfrench@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de> [arch/arm/configs]
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexandre Ghiti [Thu, 16 Dec 2021 09:44:22 +0000 (10:44 +0100)]
Documentation, arch: Remove leftovers from raw device
commit
473dcf0ffc31ce1135cd10578e7e06698cf51f4a upstream.
Raw device interface was removed so remove all references to configs
related to it.
Fixes:
603e4922f1c8 ("remove the raw driver")
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Acked-by: Arnd Bergmann <arnd@arndb.de> [arch/arm/configs]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sakari Ailus [Wed, 1 Dec 2021 12:59:31 +0000 (14:59 +0200)]
Documentation: ACPI: Fix data node reference documentation
commit
a11174952205d082f1658fab4314f0caf706e0a8 upstream.
The data node reference documentation was missing a package that must
contain the property values, instead property name and multiple values
being present in a single package. This is not aligned with the _DSD
spec.
Fix it by adding the package for the values.
Also add the missing "reg" properties to two numbered nodes.
Fixes:
b10134a3643d ("ACPI: property: Document hierarchical data extension references")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Thompson [Thu, 18 Nov 2021 10:09:52 +0000 (10:09 +0000)]
Documentation: dmaengine: Correctly describe dmatest with channel unset
commit
c61d7b2ef141abf81140756b45860a2306f395a2 upstream.
Currently the documentation states that channels must be configured before
running the dmatest. This has not been true since commit
6b41030fdc79
("dmaengine: dmatest: Restore default for channel"). Fix accordingly.
Fixes:
6b41030fdc79 ("dmaengine: dmatest: Restore default for channel")
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20211118100952.27268-3-daniel.thompson@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Leach [Wed, 17 Nov 2021 16:42:20 +0000 (16:42 +0000)]
Documentation: coresight: Fix documentation issue
commit
66bd1333abd7fa191f13b929c9119d6cd3df27b0 upstream.
Fix the description of the directories and attributes used
in cs_etm as used by perf.
Drop the references to the 'configurations' sub-directory which
had been removed in an earlier version of the patchset.
Fixes:
f71cd93d5ea4 ("Documentation: coresight: Add documentation for CoreSight config")
Reported-by: German Gomex <german.gomez@arm.com>
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20211117164220.14883-1-mike.leach@linaro.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Randy Dunlap [Sun, 7 Nov 2021 18:19:23 +0000 (18:19 +0000)]
media: correct MEDIA_TEST_SUPPORT help text
commit
09f4d1513267d0ab712f5d29e7bd136535748709 upstream.
Fix grammar/wording in the help text for MEDIA_TEST_SUPPORT.
Fixes:
4b32216adb01 ("media: split test drivers from platform directory")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maxime Ripard [Thu, 19 Aug 2021 13:59:30 +0000 (15:59 +0200)]
drm/vc4: hdmi: Make sure the device is powered with CEC
commit
20b0dfa86bef0e80b41b0e5ac38b92f23b6f27f9 upstream.
Similarly to what we encountered with the detect hook with DRM, nothing
actually prevents any of the CEC callback from being run while the HDMI
output is disabled.
However, this is an issue since any register access to the controller
when it's powered down will result in a silent hang.
Let's make sure we run the runtime_pm hooks when the CEC adapter is
opened and closed by the userspace to avoid that issue.
Fixes:
15b4511a4af6 ("drm/vc4: add HDMI CEC support")
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210819135931.895976-6-maxime@cerno.tech
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suresh Udipi [Fri, 13 Aug 2021 15:07:56 +0000 (17:07 +0200)]
media: rcar-csi2: Optimize the selection PHTW register
commit
549cc89cd09a85aaa16dc07ef3db811d5cf9bcb1 upstream.
PHTW register is selected based on default bit rate from Table[1].
for the bit rates less than or equal to 250. Currently first
value of default bit rate which is greater than or equal to
the caculated mbps is selected. This selection can be further
improved by selecting the default bit rate which is nearest to
the calculated value.
[1] specs r19uh0105ej0200-r-car-3rd-generation.pdf [Table 25.12]
Fixes:
769afd212b16 ("media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver")
Signed-off-by: Suresh Udipi <sudipi@jp.adit-jv.com>
Signed-off-by: Michael Rodin <mrodin@de.adit-jv.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Kleine-Budde [Fri, 23 Apr 2021 09:26:56 +0000 (11:26 +0200)]
can: mcp251xfd: mcp251xfd_tef_obj_read(): fix typo in error message
commit
99e7cc3b3f85d9a583ab83f386315c59443509ae upstream.
This patch fixes a typo in the error message in
mcp251xfd_tef_obj_read(), if trying to read too many objects.
Link: https://lore.kernel.org/all/20220105154300.1258636-3-mkl@pengutronix.de
Fixes:
55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Hutchings [Mon, 18 Jun 2018 22:55:40 +0000 (23:55 +0100)]
firmware: Update Kconfig help text for Google firmware
commit
d185a3466f0cd5af8f1c5c782c53bc0e6f2e7136 upstream.
The help text for GOOGLE_FIRMWARE states that it should only be
enabled when building a kernel for Google's own servers. However,
many of the drivers dependent on it are also useful on Chromebooks or
on any platform using coreboot.
Update the help text to reflect this double duty.
Fixes:
d384d6f43d1e ("firmware: google memconsole: Add coreboot support")
Reviewed-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Link: https://lore.kernel.org/r/20180618225540.GD14131@decadent.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Baruch Siach [Thu, 30 Dec 2021 16:31:53 +0000 (18:31 +0200)]
of: base: Improve argument length mismatch error
commit
5d05b811b5acb92fc581a7b328b36646c86f5ab9 upstream.
The cells_name field of of_phandle_iterator might be NULL. Use the
phandle name instead. With this change instead of:
OF: /soc/pinctrl@1000000: (null) = 3 found 2
We get:
OF: /soc/pinctrl@1000000: phandle pinctrl@1000000 needs 3, found 2
Which is a more helpful messages making DT debugging easier.
In this particular example the phandle name looks like duplicate of the
same node name. But note that the first node is the parent node
(it->parent), while the second is the phandle target (it->node). They
happen to be the same in the case that triggered this improvement. See
commit
72cb4c48a46a ("arm64: dts: qcom: ipq6018: Fix gpio-ranges
property").
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/f6a68e0088a552ea9dfd4d8e3b5b586d92594738.1640881913.git.baruch@tkos.co.il
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christian König [Mon, 17 Jan 2022 09:31:26 +0000 (10:31 +0100)]
drm/radeon: fix error handling in radeon_driver_open_kms
commit
4722f463896cc0ef1a6f1c3cb2e171e949831249 upstream.
The return value was never initialized so the cleanup code executed when
it isn't even necessary.
Just add proper error handling.
Fixes:
ab50cb9df889 ("drm/radeon/radeon_kms: Fix a NULL pointer dereference in radeon_driver_open_kms()")
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Jan Stancek <jstancek@redhat.com>
Tested-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>