Peter Hutterer [Mon, 6 Aug 2018 05:24:04 +0000 (15:24 +1000)]
filter: always init a delta smoothener for 10/10ms on trackpoints
If the trackpoint gives us deltas with less than 10ms intervals, something is
wrong. Could be bad hardware, a glitch in the matrix or a discontinuity in
the otherwise appropriately named time-space continuum. Usually it's the
first.
Let's always set up trackpoint delta smoothening for 10ms to improve the
pointer speed calculation and avoid jerky behaviors. i.e. if a trackpoint
delta comes in below 10ms, pretend it came in with a 10ms interval for
calculating the speed.
Fixes https://gitlab.freedesktop.org/libinput/libinput/issues/104
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 6 Aug 2018 05:19:57 +0000 (15:19 +1000)]
doc/user: drop the sphinx -a flag
Let's trust sphinx to know what to rebuild
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 6 Aug 2018 04:06:48 +0000 (14:06 +1000)]
tools: record: don't bother setting last_ms to 0 on the first event
The first event we receive is set to a 0ms offset anyway. Setting last_ms to 0
on the first event means the first two events have +0ms offset printed to the
log. Skip it, so the second event has the right offset.
This is human-readable data only, no effect on the recording file itself.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 6 Aug 2018 03:37:30 +0000 (13:37 +1000)]
doc/user: add touchpad pressure debugging as separate page
This way we can put it under Troubleshooting
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 6 Aug 2018 03:37:00 +0000 (13:37 +1000)]
doc/user: add the quirks tool to the tool list
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 6 Aug 2018 03:31:34 +0000 (13:31 +1000)]
doc/user: match the quirks list output with the code
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Matt Mayfield [Sun, 5 Aug 2018 17:55:02 +0000 (12:55 -0500)]
Remove seemingly extra pasted line from license
Peter Hutterer [Thu, 2 Aug 2018 06:58:58 +0000 (16:58 +1000)]
touchpad: improve finger counting for synaptics serial touchpads
A three-finger touch may cause slot N to end, in a frame after the
BTN_TOOL_TRIPLETAP. This causes tp->nfinger_down to be decremented to 2 as the
touch switches to MAYBE_END - which happens to be our num_slots. We exit early
and never restore the touch correctly.
Fix this by checking that the number of fake touches is equal to the slots, if
it is higher then we need to check for recovery.
Fixes https://gitlab.freedesktop.org/libinput/libinput/issues/99
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 13 Jul 2018 06:08:54 +0000 (16:08 +1000)]
fallback: add support for ABS_MT_TOOL_TYPE for touch screens
Cancel any touches that trigger MT_TOOL_PALM.
Fixes https://gitlab.freedesktop.org/libinput/libinput/issues/25
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 13 Jul 2018 06:24:04 +0000 (16:24 +1000)]
test: handle ABS_MT_TOOL_TYPE from the litest devices
We want to autoreplace this value where possible but not scale it to min/max,
this is effectively an enum. The same is true for slot/tracking id, so let's
add it here too.
Because it's an enum and 99% of the cases require MT_TOOL_FINGER, we always
fall back to that instead of using the axis_defaults that we use for other
axes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 13 Jul 2018 06:04:35 +0000 (16:04 +1000)]
test: add test helpers for touch sequence parts
The necessary helpers to test for a touch event + one touch frame and the
extra case for the TOUCH_CANCEL in is_touch_event
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 13 Jul 2018 05:45:22 +0000 (15:45 +1000)]
fallback: move flushing MT events to a helper function
No functional changes
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 13 Jul 2018 05:41:59 +0000 (15:41 +1000)]
fallback: change a list of if conditions to a switch statement
This used to do a lot more but now it can be handled as simple switch
statement. Bonus: we get to log a bug if we ever get here in NONE state.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 13 Jul 2018 05:22:23 +0000 (15:22 +1000)]
fallback: move the mt slot state struct/enum here
Not needed by the more generic evdev header
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 3 Aug 2018 01:15:31 +0000 (11:15 +1000)]
doc/user: mark the touchpads page as orphan
Only one link leads to it and it doesnt (right now) fit into the hierarchy.
Let's get rid of the sphinx warning.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 3 Aug 2018 01:04:18 +0000 (11:04 +1000)]
doc/user: add custom 404 pages for the old links
Switching from doxygen to sphinx broke a bunch of links because doxygen used
whatever the argument to @page was - and that usually had underscores. Sphinx
uses filenames (which use dashes) so now we have a bunch of old links going to
a 404. For the transition period at least, insert a custom 404 page for each
of those to tell users this doesn't exist anymore.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 3 Aug 2018 00:13:09 +0000 (10:13 +1000)]
Revert "doc/user: add a custom 404 page"
Nope, doesn't work, our server doesn't support htaccess.
This reverts commit
548e0eb98b46e328a64215323962c11df17b49ce.
Peter Hutterer [Thu, 2 Aug 2018 05:02:18 +0000 (15:02 +1000)]
util: remove now-unused helper functions
Obsolete with the switch to the device quirks
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 2 Aug 2018 01:01:50 +0000 (11:01 +1000)]
doc/user: add a custom 404 page
Things moved around, so let's have a custom 404 page where we can put
information in. This ist the barebones version, not sure if .htaccess is
supported.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 1 Aug 2018 23:52:59 +0000 (09:52 +1000)]
doc: drop the doxygen conversion script
It's really not that good, so no point to keep it around
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 1 Aug 2018 23:44:01 +0000 (09:44 +1000)]
doc/user: rename filenames with underscores to dashes
Everything else is, let's be consistent here.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 1 Aug 2018 23:37:54 +0000 (09:37 +1000)]
doc/user: swap some note out with hint
Because why not...
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 1 Aug 2018 23:30:57 +0000 (09:30 +1000)]
doc/user: add a hack to get to the git version
meson doesn't have configuration_data() in vcs_tag so we can only replace one
string. sphinx cannot include things in-line.
Since we want the git version to be replaced in random places, we need to put
it into rst_prolog in conf.py - but that's where we neet to replace other
things too. Work around this by generating a mini python module that returns
the git version, then call that in conf.py.
Side-bonus: we now have access to the full commit and the abbreviated commit.
Not that anything actually uses this...
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 1 Aug 2018 22:47:06 +0000 (08:47 +1000)]
doc/user: drop the old page-hierarchy page
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 1 Aug 2018 07:12:38 +0000 (17:12 +1000)]
doc/user: use extlink for a common commit links
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 1 Aug 2018 00:34:22 +0000 (10:34 +1000)]
doc/user: more fixes including adding a device-types section
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 1 Aug 2018 00:16:17 +0000 (10:16 +1000)]
doc/user: tidy up the development page
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 1 Aug 2018 23:42:57 +0000 (09:42 +1000)]
README: drop a @ref in favor of the full link
No doxygen leftovers in README anymore, exspecially now that we don't use it
for doxygen anymore.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 1 Aug 2018 05:47:03 +0000 (15:47 +1000)]
fallback: add another debug message for tablet-mode keyboard suspend
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 1 Aug 2018 05:28:58 +0000 (15:28 +1000)]
fallback: change a debug message to be less ambiguous
"activated" sounds like we're disabling things here, but we're just pairing
the two devices
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 31 Jul 2018 08:17:48 +0000 (18:17 +1000)]
doc/user: more documentation cleanups and fixes
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 31 Jul 2018 06:03:49 +0000 (16:03 +1000)]
doc/user: some rewording and improvements
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 31 Jul 2018 03:00:38 +0000 (13:00 +1000)]
meson.build: fix name of the measure touchpad-tap script
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 31 Jul 2018 00:50:57 +0000 (10:50 +1000)]
doc/user: update the 'no package found' link to the meson version post
Now that we dropped autotools anyway, it's better to link to the meson version
of that blog post.
Related #96
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 31 Jul 2018 00:49:47 +0000 (10:49 +1000)]
doc/user: building - promote dependencies to a higher-level section
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 31 Jul 2018 00:48:34 +0000 (10:48 +1000)]
doc/user: the SELinux section doesn't apply to modern meson
Related #96
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 31 Jul 2018 00:42:06 +0000 (10:42 +1000)]
doc/user: re-do the conditional build section
Related #96
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 31 Jul 2018 00:25:01 +0000 (10:25 +1000)]
doc/user: drop the autotools builds
Anyone who's still on <= 1.8 either knows how to build it already or relies on
a distribution to do that for them. Drop the section.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 31 Jul 2018 00:22:31 +0000 (10:22 +1000)]
doc/user: add a note on meson's dependency() in the building docs
See #96
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 31 Jul 2018 00:17:59 +0000 (10:17 +1000)]
doc/user: mesonconf is meson configure
Listed in #96
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
jeff [Mon, 30 Jul 2018 17:03:03 +0000 (13:03 -0400)]
tablet: clear tablet history on tool contact change
On some ELAN tablets we get a coordinate jump in the same frame that we put
the tip down. The existing axis smoothing causes that jump to be somewhere in
the middle between the previous and the next coordinates, causing a small
stroke from the smoothed position to the next. Prevent this by resetting the
history on tip down/up so we always take that coordinate.
Fixes #94
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 30 Jul 2018 05:57:08 +0000 (15:57 +1000)]
libinput 1.11.901
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Sat, 28 Jul 2018 09:35:36 +0000 (19:35 +1000)]
doc/user: add a page detailing what configuration toggles are available
High level view only but at least it's a link we can point people to.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 10 Jul 2018 07:32:35 +0000 (17:32 +1000)]
dox: switch to sphinx for the user-visible documentation
This is a large commit because it's difficult to split this up and we don't
care about bisecting here anyway.
doxygen is going to produce the API documentation only
sphinx is going to produce the prose user (and a bit of developer) documentation.
The source split is doc/api and doc/user.
Steps performed:
- run the doxygen-to-sphinx.sh script to convert all .dox sources to .rst
- manually fixed the .rst to render correctly
- add a few extra .rst documents to generate the right hierarchy
- hook up sphinx-build in meson
- add a new @mainpage for doxygen more aimed at developers
For the build directory:
- sphinx produces /Documentation
- doxygen now produces /api/
These need to be manually combined in the wayland-web repo, meson doesn't
support subdirectories as output paths within the build dir and the
documentation doesn't need to be installed anywhere.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 30 Jul 2018 02:04:05 +0000 (12:04 +1000)]
GitLab CI: print out the image age in seconds
Helps with debugging purposes
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 30 Jul 2018 00:51:36 +0000 (10:51 +1000)]
Gitlab CI: set DEBIAN_FRONTEND noninteractive for the Ubuntu images
Because Godot doesn't care about tzdata, so waiting for him is pointless.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 27 Jul 2018 07:31:14 +0000 (17:31 +1000)]
Add the buildreqs for sphinx-build
Separate commit so we can prep the containers for the real PR and thus test if
something break.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 25 Jul 2018 22:32:31 +0000 (08:32 +1000)]
doc: split the graphs into a separate array for re-use
We need this in the sphinx documentation.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 24 Jul 2018 05:01:39 +0000 (15:01 +1000)]
doc: move the @verbatim start to the list item
This is mostly for sphinx' parsing benefit, doxygen doesn't need it and
renders the same either way.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 26 Jul 2018 01:22:17 +0000 (11:22 +1000)]
doc: device-quirks: redo the model quirks <dl> for sphinx' benefit
sphinx only supports one line of <dt> content, so we have to compress these.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 24 Jul 2018 01:25:16 +0000 (11:25 +1000)]
doc: a few replacements to make sphinx happy/prettier
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 27 Jul 2018 04:01:35 +0000 (14:01 +1000)]
doc: refer to "the libinput documentation" in a few @see cases
This is in preparation for a change to sphinx as the user-visible
documentation. Ideally we could cross-link between the two but that's tricky
to do automatically. Linking to the html pages/anchors directly works fine but
risks the links going stale, especially while the documentation is still in
flux.
Having a generic "refer to the libinput documentation" is a bit of a cop-out
least this way the links cannot go stale.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 27 Jul 2018 05:51:31 +0000 (15:51 +1000)]
doc: drop a few unnecessary @ref
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 25 Jul 2018 22:50:13 +0000 (08:50 +1000)]
doc: enable warnings in doxygen
We want to see missed links
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 27 Jul 2018 03:58:40 +0000 (13:58 +1000)]
doc: copy some bits of the tablet docs to doxygen
So it shows up in the doxygen contents. These are the bits that are mostly of
interest to developers, we might remove the user documentation entry later,
but let's leave it there for now.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Benjamin Tissoires [Mon, 23 Jul 2018 11:01:17 +0000 (13:01 +0200)]
gitlab-ci: use skopeo to check on container images
this allows to replace complex curl queries with simpler commands.
We need a newer minimalist image with skopeo in addition to jq and
curl.
Also, I am currently not relying on skopeo to delete the image as I am
not so sure we will get the same cleanup than with the current sha method
and also:
https://bugzilla.redhat.com/show_bug.cgi?id=1481196
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Peter Hutterer [Wed, 25 Jul 2018 23:18:29 +0000 (09:18 +1000)]
doc: move the Architecture blurb to the 'what is libinput' page
The vast majority of ppl reading the README is unlikely to care about this,
but they do care about the Wayland vs X.Org situation so let's split this up.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 26 Jul 2018 05:05:40 +0000 (15:05 +1000)]
tools: drop two unused imports
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 26 Jul 2018 03:56:15 +0000 (13:56 +1000)]
doc: we don't need the Namespaces doxygen page
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 26 Jul 2018 02:06:10 +0000 (12:06 +1000)]
util: fix a ubsan complaint about undefined left-shift
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 26 Jul 2018 00:38:16 +0000 (10:38 +1000)]
test: properly release a few leaking litest device
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 26 Jul 2018 00:25:52 +0000 (10:25 +1000)]
test: release a few leaking udev devices
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 26 Jul 2018 01:39:47 +0000 (11:39 +1000)]
doc: fix erroneous </dt>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 25 Jul 2018 23:51:54 +0000 (09:51 +1000)]
test: supress another bash warning
Failing the leftover-rules check in the valgrind stage because
==1491== Invalid read of size 16
==1491== at 0x5320AE8: __wcsnlen_sse4_1 (in /usr/lib64/libc-2.27.so)
==1491== by 0x5310AD1: wcsrtombs (in /usr/lib64/libc-2.27.so)
==1491== by 0x1AA403: ??? (in /usr/bin/bash)
==1491== by 0x1AB3E3: glob_filename (in /usr/bin/bash)
==1491== by 0x179FF1: shell_glob_filename (in /usr/bin/bash)
==1491== by 0x1752CD: ??? (in /usr/bin/bash)
==1491== by 0x14C05F: ??? (in /usr/bin/bash)
==1491== by 0x14E2E3: execute_command_internal (in /usr/bin/bash)
==1491== by 0x14FBC5: execute_command (in /usr/bin/bash)
==1491== by 0x137598: reader_loop (in /usr/bin/bash)
==1491== by 0x135D38: main (in /usr/bin/bash)
==1491== Address 0x5651fd0 is 32 bytes before a block of size 128 in arena "client"
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 25 Jul 2018 11:09:12 +0000 (21:09 +1000)]
doc: fix the url where to file a new bug
Peter Hutterer [Wed, 25 Jul 2018 11:14:02 +0000 (21:14 +1000)]
doc: add a warning note that the reporting-bugs instructions do matter
And remove the paragraph below that states the same thing.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 25 Jul 2018 11:12:37 +0000 (21:12 +1000)]
doc: point to libinput --version
This will fail pre 1.8 but oh well.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 24 Jul 2018 04:45:00 +0000 (14:45 +1000)]
doc: replace a few <b> with markdown's **
At least where possible, doxygen doesn't parse lists starting with ** as
emphasized.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 24 Jul 2018 04:43:20 +0000 (14:43 +1000)]
doc: replace html lists with markdown ones
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 24 Jul 2018 03:09:48 +0000 (13:09 +1000)]
doc: reporting-bugs: use evemu-record as link text, not evemu
Because that's the tool we're using
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 24 Jul 2018 03:01:23 +0000 (13:01 +1000)]
doc: single ` is enough for code highlighting
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 24 Jul 2018 02:30:07 +0000 (12:30 +1000)]
doc: indent all @note continuation lines
This isn't required by doxygen but for a potential switch to RTD/sphinx
(see #95) it helps having this set up correctly.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 24 Jul 2018 05:03:09 +0000 (15:03 +1000)]
README: indent the links that belong to list items
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 20 Jul 2018 05:30:00 +0000 (15:30 +1000)]
doc: document the device quirks
Add some documentation for the most common quirks or at least the ones that
the user may eventually see or have to set. Drop the git commit hash into the
docs to make sure it's spelled out that the quirks are only valid for that
commit. Adding something with @include* requires the EXAMPLE_PATH to be set.
Doxygen doesn't parse markdown in @includedoc so we have to insert the commit
as normal HTML tag.
Related to https://gitlab.freedesktop.org/libinput/libinput/issues/87
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 24 Jul 2018 03:15:42 +0000 (13:15 +1000)]
doc: fix ref to device-quirks
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 24 Jul 2018 01:56:13 +0000 (11:56 +1000)]
doc: replace <a href> links with the doxygen markdown equivalent
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 24 Jul 2018 01:55:00 +0000 (11:55 +1000)]
doc: replace <pre> with @verbatim
Be more consistent here
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 24 Jul 2018 01:44:19 +0000 (11:44 +1000)]
doc: add a section name to seats-overview
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 23 Jul 2018 11:21:31 +0000 (21:21 +1000)]
Gitlab CI: properly define empty dependencies for the wayland-web hook
This needs to be an empty array, see the "artifacts:paths" documentation for
an example
https://docs.gitlab.com/ee/ci/yaml/#when-a-dependent-job-will-fail
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Greg V [Mon, 23 Jul 2018 10:44:41 +0000 (13:44 +0300)]
Update FreeBSD package cache in CI
Should fix #93
Peter Hutterer [Mon, 23 Jul 2018 03:59:39 +0000 (13:59 +1000)]
test: add --gen-suppressions=all to the valgrind run
Because if we have a heisenbug that can't be reproduced on other machines,
having the suppression output in the log can save a lot of time.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Jeremy [Sun, 22 Jul 2018 21:16:36 +0000 (23:16 +0200)]
Improve HP Chromebook 14 pressure ranges
Peter Hutterer [Thu, 19 Jul 2018 22:37:47 +0000 (08:37 +1000)]
Merge branch 'master' of gitlab.freedesktop.org:libinput/libinput
Greg V [Wed, 18 Jul 2018 18:37:25 +0000 (21:37 +0300)]
Add versionsort test
And make local versionsort testable even when the native one is present.
Peter Hutterer [Thu, 19 Jul 2018 05:34:25 +0000 (15:34 +1000)]
tools: fix touch frame checks in the YAML verifier script
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 19 Jul 2018 04:52:44 +0000 (14:52 +1000)]
touchpad: don't NONE or HOVERING touches towards the touch
To trigger this, we'd need 1, 2, 3 fingers down, release fingers 1 and 2 but
keep 3 down. Then put finger 1 down again. Touches 1 and 3 are alive now,
touch 2 is in state NONE.
During the thumb detection we took the first touch not in BEGIN and assigned
it to "first" - this would now be the second touch in state NONE.
Real effect is relatively minimal since we only use the coordinates here.
Fixes https://gitlab.freedesktop.org/libinput/libinput/issues/89
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 19 Jul 2018 04:10:32 +0000 (14:10 +1000)]
tools: always set the log handler for debug-events and debug-gui
This way errors are highlighted in red even without --verbose
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 19 Jul 2018 01:39:35 +0000 (11:39 +1000)]
doc: add a section to the FAQs "is libinput required for Wayland"
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 19 Jul 2018 01:20:54 +0000 (11:20 +1000)]
doc: move the "General" section to the "Developer" section
The info here is mostly developer-oriented, let's group this together.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 19 Jul 2018 01:12:27 +0000 (11:12 +1000)]
doc: fix references to a trackpoint range in the FAQs
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 19 Jul 2018 01:11:58 +0000 (11:11 +1000)]
README: add a user documentation section fairly high up
For those with a tldr attention span
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 19 Jul 2018 01:06:50 +0000 (11:06 +1000)]
doc: break up the "what is libinput" page with two sections
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Greg V [Mon, 16 Jul 2018 15:33:39 +0000 (18:33 +0300)]
Add FreeBSD (cross-compliation based) CI
Fixes #82
Greg V [Sun, 15 Jul 2018 21:41:05 +0000 (00:41 +0300)]
Autodetect and use libepoll-shim on FreeBSD
Peter Hutterer [Tue, 17 Jul 2018 00:51:35 +0000 (10:51 +1000)]
evdev: fix the trackpoint multiplier info message
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 17 Jul 2018 00:02:49 +0000 (10:02 +1000)]
tools: setenv the quirks dir when running from the build directory
Fixes #84
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 17 Jul 2018 00:12:16 +0000 (10:12 +1000)]
tools: change prototype of the builddir lookup function
Only one place really needs the return argument, so we might as well just pass
the memory to be returned in.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Greg V [Sun, 15 Jul 2018 21:05:33 +0000 (00:05 +0300)]
Add input.h for FreeBSD
Greg V [Tue, 10 Jul 2018 11:01:54 +0000 (14:01 +0300)]
test: ptrace compatibility with *BSD
Greg V [Tue, 10 Jul 2018 10:57:12 +0000 (13:57 +0300)]
test: use simple portable sendfile
There's no need for high performance in these little tests, so instead of
supporting various platform-specific sendfile() implementations, just use a local read-write function.