NFSv4.2: Fix a potential double free with READ_PLUS

commit 43439d858bbae244a510de47f9a55f667ca4ed52 upstream.

kfree()-ing the scratch page isn't enough, we also need to set the pointer
back to NULL to avoid a double-free in the case of a resend.

Fixes: fbd2a05f29a9 (NFSv4.2: Rework scratch handling for READ_PLUS)
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md: Free resources in __md_stop

commit 3e453522593d74a87cf68a38e14aa36ebca1dbcd upstream.

If md_run() fails after ->active_io is initialized, then percpu_ref_exit
is called in error path. However, later md_free_disk will call
percpu_ref_exit again which leads to a panic because of null pointer
dereference. It can also trigger this bug when resources are initialized
but are freed in error path, then will be freed again in md_free_disk.

BUG: kernel NULL pointer dereference, address: 0000000000000038
Oops: 0000 [#1] PREEMPT SMP
Workqueue: md_misc mddev_delayed_delete
RIP: 0010:free_percpu+0x110/0x630
Call Trace:
 <TASK>
 __percpu_ref_exit+0x44/0x70
 percpu_ref_exit+0x16/0x90
 md_free_disk+0x2f/0x80
 disk_release+0x101/0x180
 device_release+0x84/0x110
 kobject_put+0x12a/0x380
 kobject_put+0x160/0x380
 mddev_delayed_delete+0x19/0x30
 process_one_work+0x269/0x680
 worker_thread+0x266/0x640
 kthread+0x151/0x1b0
 ret_from_fork+0x1f/0x30

For creating raid device, md raid calls do_md_run->md_run, dm raid calls
md_run. We alloc those memory in md_run. For stopping raid device, md raid
calls do_md_stop->__md_stop, dm raid calls md_stop->__md_stop. So we can
free those memory resources in __md_stop.

Fixes: 72adae23a72c ("md: Change active_io to percpu")
Reported-and-tested-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "drm/amd/display: Do not set drr on pipe commit"

commit 360930985ec9f394c82ba0b235403b4a366d1560 upstream.

This reverts commit e101bf95ea87ccc03ac2f48dfc0757c6364ff3c7.

Caused a regression:

Samsung Odyssey Neo G9, running at 5120x1440@240/VRR, connected to Navi
21 via DisplayPort, blanks and the GPU hangs while starting the Steam
game Assetto Corsa Competizione (via Proton 7.0).

Example dmesg excerpt:

 amdgpu 0000:0c:00.0: [drm] ERROR [CRTC:82:crtc-0] flip_done timed out
 NMI watchdog: Watchdog detected hard LOCKUP on cpu 6
 [...]
 RIP: 0010:amdgpu_device_rreg.part.0+0x2f/0xf0 [amdgpu]
 Code: 41 54 44 8d 24 b5 00 00 00 00 55 89 f5 53 48 89 fb 4c 3b a7 60 0b 00 00 73 6a 83 e2 02 74 29 4c 03 a3 68 0b 00 00 45 8b 24 24 <48> 8b 43 08 0f b7 70 3e 66 90 44 89 e0 5b 5d 41 5c 31 d2 31 c9 31
 RSP: 0000:ffffb39a119dfb88 EFLAGS: 00000086
 RAX: ffffffffc0eb96a0 RBX: ffff9e7963dc0000 RCX: 0000000000007fff
 RDX: 0000000000000000 RSI: 0000000000004ff6 RDI: ffff9e7963dc0000
 RBP: 0000000000004ff6 R08: ffffb39a119dfc40 R09: 0000000000000010
 R10: ffffb39a119dfc40 R11: ffffb39a119dfc44 R12: 00000000000e05ae
 R13: 0000000000000000 R14: ffff9e7963dc0010 R15: 0000000000000000
 FS:  000000001012f6c0(0000) GS:ffff9e805eb80000(0000) knlGS:000000007fd40000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00000000461ca000 CR3: 00000002a8a20000 CR4: 0000000000350ee0
 Call Trace:
  <TASK>
  dm_read_reg_func+0x37/0xc0 [amdgpu]
  generic_reg_get2+0x22/0x60 [amdgpu]
  optc1_get_crtc_scanoutpos+0x6a/0xc0 [amdgpu]
  dc_stream_get_scanoutpos+0x74/0x90 [amdgpu]
  dm_crtc_get_scanoutpos+0x82/0xf0 [amdgpu]
  amdgpu_display_get_crtc_scanoutpos+0x91/0x190 [amdgpu]
  ? dm_read_reg_func+0x37/0xc0 [amdgpu]
  amdgpu_get_vblank_counter_kms+0xb4/0x1a0 [amdgpu]
  dm_pflip_high_irq+0x213/0x2f0 [amdgpu]
  amdgpu_dm_irq_handler+0x8a/0x200 [amdgpu]
  amdgpu_irq_dispatch+0xd4/0x220 [amdgpu]
  amdgpu_ih_process+0x7f/0x110 [amdgpu]
  amdgpu_irq_handler+0x1f/0x70 [amdgpu]
  __handle_irq_event_percpu+0x46/0x1b0
  handle_irq_event+0x34/0x80
  handle_edge_irq+0x9f/0x240
  __common_interrupt+0x66/0x110
  common_interrupt+0x5c/0xd0
  asm_common_interrupt+0x22/0x40

Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Zero the pipe cpumask on alloc to avoid spurious -EBUSY

commit 3d07fa1dd19035eb0b13ae6697efd5caa9033e74 upstream.

The pipe cpumask used to serialize opens between the main and percpu
trace pipes is not zeroed or initialized. This can result in
spurious -EBUSY returns if underlying memory is not fully zeroed.
This has been observed by immediate failure to read the main
trace_pipe file on an otherwise newly booted and idle system:

 # cat /sys/kernel/debug/tracing/trace_pipe
 cat: /sys/kernel/debug/tracing/trace_pipe: Device or resource busy

Zero the allocation of pipe_cpumask to avoid the problem.

Link: https://lore.kernel.org/linux-trace-kernel/20230831125500.986862-1-bfoster@redhat.com
Cc: stable@vger.kernel.org
Fixes: c2489bb7e6be ("tracing: Introduce pipe_cpumask to avoid race on trace_pipes")
Reviewed-by: Zheng Yejian <zhengyejian1@huawei.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: sc16is7xx: fix regression with GPIO configuration

[ Upstream commit 0499942928341d572a42199580433c2b0725211e ]

Commit 679875d1d880 ("sc16is7xx: Separate GPIOs from modem control lines")
and commit 21144bab4f11 ("sc16is7xx: Handle modem status lines")
changed the function of the GPIOs pins to act as modem control
lines without any possibility of selecting GPIO function.

As a consequence, applications that depends on GPIO lines configured
by default as GPIO pins no longer work as expected.

Also, the change to select modem control lines function was done only
for channel A of dual UART variants (752/762). This was not documented
in the log message.

Allow to specify GPIO or modem control line function in the device
tree, and for each of the ports (A or B).

Do so by using the new device-tree property named
"nxp,modem-control-line-ports" (property added in separate patch).

When registering GPIO chip controller, mask-out GPIO pins declared as
modem control lines according to this new DT property.

Fixes: 679875d1d880 ("sc16is7xx: Separate GPIOs from modem control lines")
Fixes: 21144bab4f11 ("sc16is7xx: Handle modem status lines")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Lech Perczak <lech.perczak@camlingroup.com>
Tested-by: Lech Perczak <lech.perczak@camlingroup.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230807214556.540627-5-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: sc16is7xx: remove obsolete out_thread label

[ Upstream commit dabc54a45711fe77674a6c0348231e00e66bd567 ]

Commit c8f71b49ee4d ("serial: sc16is7xx: setup GPIO controller later
in probe") moved GPIO setup code later in probe function. Doing so
also required to move ports cleanup code (out_ports label) after the
GPIO cleanup code.

After these moves, the out_thread label becomes misplaced and makes
part of the cleanup code illogical.

This patch remove the now obsolete out_thread label and make GPIO
setup code jump to out_ports label if it fails.

Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Lech Perczak <lech.perczak@camlingroup.com>
Tested-by: Lech Perczak <lech.perczak@camlingroup.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230807214556.540627-3-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 049994292834 ("serial: sc16is7xx: fix regression with GPIO configuration")
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/x86/uncore: Correct the number of CHAs on EMR

commit 6f7f984fa85b305799076a1bcec941b9377587de upstream.

Starting from SPR, the basic uncore PMON information is retrieved from
the discovery table (resides in an MMIO space populated by BIOS). It is
called the discovery method. The existing value of the type->num_boxes
is from the discovery table.

On some SPR variants, there is a firmware bug that makes the value from the
discovery table incorrect. We use the value from the
SPR_MSR_UNC_CBO_CONFIG MSR to replace the one from the discovery table:

   38776cc45eb7 ("perf/x86/uncore: Correct the number of CHAs on SPR")

Unfortunately, the SPR_MSR_UNC_CBO_CONFIG isn't available for the EMR
XCC (Always returns 0), but the above firmware bug doesn't impact the
EMR XCC.

Don't let the value from the MSR replace the existing value from the
discovery table.

Fixes: 38776cc45eb7 ("perf/x86/uncore: Correct the number of CHAs on SPR")
Reported-by: Stephane Eranian <eranian@google.com>
Reported-by: Yunying Sun <yunying.sun@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Yunying Sun <yunying.sun@intel.com>
Link: https://lore.kernel.org/r/20230905134248.496114-1-kan.liang@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/sgx: Break up long non-preemptible delays in sgx_vepc_release()

commit 3d7d72a34e05b23e21bafc8bfb861e73c86b31f3 upstream.

On large enclaves we hit the softlockup warning with following call trace:

xa_erase()
sgx_vepc_release()
__fput()
task_work_run()
do_exit()

The latency issue is similar to the one fixed in:

  8795359e35bc ("x86/sgx: Silence softlockup detection when releasing large enclaves")

The test system has 64GB of enclave memory, and all is assigned to a single VM.
Release of 'vepc' takes a longer time and causes long latencies, which triggers
the softlockup warning.

Add cond_resched() to give other tasks a chance to run and reduce
latencies, which also avoids the softlockup detector.

[ mingo: Rewrote the changelog. ]

Fixes: 540745ddbc70 ("x86/sgx: Introduce virtual EPC for use by KVM guests")
Reported-by: Yu Zhang <yu.zhang@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Yu Zhang <yu.zhang@ionos.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Acked-by: Haitao Huang <haitao.huang@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: core: Fix oversight in SuperSpeed initialization

commit 59cf445754566984fd55af19ba7146c76e6627bc upstream.

Commit 85d07c556216 ("USB: core: Unite old scheme and new scheme
descriptor reads") altered the way USB devices are enumerated
following detection, and in the process it messed up the
initialization of SuperSpeed (or faster) devices:

[   31.650759] usb 2-1: new SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd
[   31.663107] usb 2-1: device descriptor read/8, error -71
[   31.952697] usb 2-1: new SuperSpeed Plus Gen 2x1 USB device number 3 using xhci_hcd
[   31.965122] usb 2-1: device descriptor read/8, error -71
[   32.080991] usb usb2-port1: attempt power cycle
...

The problem was caused by the commit forgetting that in SuperSpeed or
faster devices, the device descriptor uses a logarithmic encoding of
the bMaxPacketSize0 value.  (For some reason I thought the 255 case in
the switch statement was meant for these devices, but it isn't -- it
was meant for Wireless USB and is no longer needed.)

We can fix the oversight by testing for buf->bMaxPacketSize0 = 9
(meaning 512, the actual maxpacket size for ep0 on all SuperSpeed
devices) and straightening out the logic that checks and adjusts our
initial guesses of the maxpacket value.

Reported-and-tested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Closes: https://lore.kernel.org/linux-usb/20230810002257.nadxmfmrobkaxgnz@synopsys.com/
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: 85d07c556216 ("USB: core: Unite old scheme and new scheme descriptor reads")
Link: https://lore.kernel.org/r/8809e6c5-59d5-4d2d-ac8f-6d106658ad73@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: core: Fix race by not overwriting udev->descriptor in hub_port_init()

commit ff33299ec8bb80cdcc073ad9c506bd79bb2ed20b upstream.

Syzbot reported an out-of-bounds read in sysfs.c:read_descriptors():

BUG: KASAN: slab-out-of-bounds in read_descriptors+0x263/0x280 drivers/usb/core/sysfs.c:883
Read of size 8 at addr ffff88801e78b8c8 by task udevd/5011

CPU: 0 PID: 5011 Comm: udevd Not tainted 6.4.0-rc6-syzkaller-00195-g40f71e7cd3c6 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106
 print_address_description.constprop.0+0x2c/0x3c0 mm/kasan/report.c:351
 print_report mm/kasan/report.c:462 [inline]
 kasan_report+0x11c/0x130 mm/kasan/report.c:572
 read_descriptors+0x263/0x280 drivers/usb/core/sysfs.c:883
...
Allocated by task 758:
...
 __do_kmalloc_node mm/slab_common.c:966 [inline]
 __kmalloc+0x5e/0x190 mm/slab_common.c:979
 kmalloc include/linux/slab.h:563 [inline]
 kzalloc include/linux/slab.h:680 [inline]
 usb_get_configuration+0x1f7/0x5170 drivers/usb/core/config.c:887
 usb_enumerate_device drivers/usb/core/hub.c:2407 [inline]
 usb_new_device+0x12b0/0x19d0 drivers/usb/core/hub.c:2545

As analyzed by Khazhy Kumykov, the cause of this bug is a race between
read_descriptors() and hub_port_init(): The first routine uses a field
in udev->descriptor, not expecting it to change, while the second
overwrites it.

Prior to commit 45bf39f8df7f ("USB: core: Don't hold device lock while
reading the "descriptors" sysfs file") this race couldn't occur,
because the routines were mutually exclusive thanks to the device
locking.  Removing that locking from read_descriptors() exposed it to
the race.

The best way to fix the bug is to keep hub_port_init() from changing
udev->descriptor once udev has been initialized and registered.
Drivers expect the descriptors stored in the kernel to be immutable;
we should not undermine this expectation.  In fact, this change should
have been made long ago.

So now hub_port_init() will take an additional argument, specifying a
buffer in which to store the device descriptor it reads.  (If udev has
not yet been initialized, the buffer pointer will be NULL and then
hub_port_init() will store the device descriptor in udev as before.)
This eliminates the data race responsible for the out-of-bounds read.

The changes to hub_port_init() appear more extensive than they really
are, because of indentation changes resulting from an attempt to avoid
writing to other parts of the usb_device structure after it has been
initialized.  Similar changes should be made to the code that reads
the BOS descriptor, but that can be handled in a separate patch later
on.  This patch is sufficient to fix the bug found by syzbot.

Reported-and-tested-by: syzbot+18996170f8096c6174d0@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-usb/000000000000c0ffe505fe86c9ca@google.com/#r
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Khazhy Kumykov <khazhy@google.com>
Fixes: 45bf39f8df7f ("USB: core: Don't hold device lock while reading the "descriptors" sysfs file")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/b958b47a-9a46-4c22-a9f9-e42e42c31251@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: core: Change usb_get_device_descriptor() API

commit de28e469da75359a2bb8cd8778b78aa64b1be1f4 upstream.

The usb_get_device_descriptor() routine reads the device descriptor
from the udev device and stores it directly in udev->descriptor.  This
interface is error prone, because the USB subsystem expects in-memory
copies of a device's descriptors to be immutable once the device has
been initialized.

The interface is changed so that the device descriptor is left in a
kmalloc-ed buffer, not copied into the usb_device structure.  A
pointer to the buffer is returned to the caller, who is then
responsible for kfree-ing it.  The corresponding changes needed in the
various callers are fairly small.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/d0111bb6-56c1-4f90-adf2-6cfe152f6561@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: core: Unite old scheme and new scheme descriptor reads

commit 85d07c55621676d47d873d2749b88f783cd4d5a1 upstream.

In preparation for reworking the usb_get_device_descriptor() routine,
it is desirable to unite the two different code paths responsible for
initially determining endpoint 0's maximum packet size in a newly
discovered USB device.  Making this determination presents a
chicken-and-egg sort of problem, in that the only way to learn the
maxpacket value is to get it from the device descriptor retrieved from
the device, but communicating with the device to retrieve a descriptor
requires us to know beforehand the ep0 maxpacket size.

In practice this problem is solved in two different ways, referred to
in hub.c as the "old scheme" and the "new scheme".  The old scheme
(which is the approach recommended by the USB-2 spec) involves asking
the device to send just the first eight bytes of its device
descriptor.  Such a transfer uses packets containing no more than
eight bytes each, and every USB device must have an ep0 maxpacket size
>= 8, so this should succeed.  Since the bMaxPacketSize0 field of the
device descriptor lies within the first eight bytes, this is all we
need.

The new scheme is an imitation of the technique used in an early
Windows USB implementation, giving it the happy advantage of working
with a wide variety of devices (some of them at the time would not
work with the old scheme, although that's probably less true now).  It
involves making an initial guess of the ep0 maxpacket size, asking the
device to send up to 64 bytes worth of its device descriptor (which is
only 18 bytes long), and then resetting the device to clear any error
condition that might have resulted from the guess being wrong.  The
initial guess is determined by the connection speed; it should be
correct in all cases other than full speed, for which the allowed
values are 8, 16, 32, and 64 (in this case the initial guess is 64).

The reason for this patch is that the old- and new-scheme parts of
hub_port_init() use different code paths, one involving
usb_get_device_descriptor() and one not, for their initial reads of
the device descriptor.  Since these reads have essentially the same
purpose and are made under essentially the same circumstances, this is
illogical.  It makes more sense to have both of them use a common
subroutine.

This subroutine does basically what the new scheme's code did, because
that approach is more general than the one used by the old scheme.  It
only needs to know how many bytes to transfer and whether or not it is
being called for the first iteration of a retry loop (in case of
certain time-out errors).  There are two main differences from the
former code:

We initialize the bDescriptorType field of the transfer buffer
to 0 before performing the transfer, to avoid possibly
accessing an uninitialized value afterward.

We read the device descriptor into a temporary buffer rather
than storing it directly into udev->descriptor, which the old
scheme implementation used to do.

Since the whole point of this first read of the device descriptor is
to determine the bMaxPacketSize0 value, that is what the new routine
returns (or an error code).  The value is stored in a local variable
rather than in udev->descriptor.  As a side effect, this necessitates
moving a section of code that checks the bcdUSB field for SuperSpeed
devices until after the full device descriptor has been retrieved.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/495cb5d4-f956-4f4a-a875-1e67e9489510@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: bus: verify partner exists in typec_altmode_attention

commit f23643306430f86e2f413ee2b986e0773e79da31 upstream.

Some usb hubs will negotiate DisplayPort Alt mode with the device
but will then negotiate a data role swap after entering the alt
mode. The data role swap causes the device to unregister all alt
modes, however the usb hub will still send Attention messages
even after failing to reregister the Alt Mode. type_altmode_attention
currently does not verify whether or not a device's altmode partner
exists, which results in a NULL pointer error when dereferencing
the typec_altmode and typec_altmode_ops belonging to the altmode
partner.

Verify the presence of a device's altmode partner before sending
the Attention message to the Alt Mode driver.

Fixes: 8a37d87d72f0 ("usb: typec: Bus type for alternate modes")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230814180559.923475-1-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: tcpm: set initial svdm version based on pd revision

commit c97cd0b4b54eb42aed7f6c3c295a2d137f6d2416 upstream.

When sending Discover Identity messages to a Port Partner that uses Power
Delivery v2 and SVDM v1, we currently send PD v2 messages with SVDM v2.0,
expecting the port partner to respond with its highest supported SVDM
version as stated in Section 6.4.4.2.3 in the Power Delivery v3
specification. However, sending SVDM v2 to some Power Delivery v2 port
partners results in a NAK whereas sending SVDM v1 does not.

NAK messages can be handled by the initiator (PD v3 section 6.4.4.2.5.1),
and one solution could be to resend Discover Identity on a lower SVDM
version if possible. But, Section 6.4.4.3 of PD v2 states that "A NAK
response Should be taken as an indication not to retry that particular
Command."

Instead, we can set the SVDM version to the maximum one supported by the
negotiated PD revision. When operating in PD v2, this obeys Section
6.4.4.2.3, which states the SVDM field "Shall be set to zero to indicate
Version 1.0." In PD v3, the SVDM field "Shall be set to 01b to indicate
Version 2.0."

Fixes: c34e85fa69b9 ("usb: typec: tcpm: Send DISCOVER_IDENTITY from dedicated work")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230731165926.1815338-1-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

of: property: fw_devlink: Add a devlink for panel followers

commit fbf0ea2da3c7cd0b33ed7ae53a67ab1c24838cba upstream.

Inform fw_devlink of the fact that a panel follower (like a
touchscreen) is effectively a consumer of the panel from the purposes
of fw_devlink.

NOTE: this patch isn't required for correctness but instead optimizes
probe order / helps avoid deferrals.

Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727101636.v4.4.Ibf8e1342b5b7906279db2365aca45e6253857bb3@changeid
Cc: Adam Ford <aford173@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: brcmstb-avs-cpufreq: Fix -Warray-bounds bug

commit e520d0b6be950ce3738cf4b9bd3b392be818f1dc upstream.

Allocate extra space for terminating element at:

drivers/cpufreq/brcmstb-avs-cpufreq.c:
449         table[i].frequency = CPUFREQ_TABLE_END;

and add code comment to make this clear.

This fixes the following -Warray-bounds warning seen after building
ARM with multi_v7_defconfig (GCC 13):
In function 'brcm_avs_get_freq_table',
    inlined from 'brcm_avs_cpufreq_init' at drivers/cpufreq/brcmstb-avs-cpufreq.c:623:15:
drivers/cpufreq/brcmstb-avs-cpufreq.c:449:28: warning: array subscript 5 is outside array bounds of 'void[60]' [-Warray-bounds=]
  449 |         table[i].frequency = CPUFREQ_TABLE_END;
In file included from include/linux/node.h:18,
                 from include/linux/cpu.h:17,
                 from include/linux/cpufreq.h:12,
                 from drivers/cpufreq/brcmstb-avs-cpufreq.c:44:
In function 'devm_kmalloc_array',
    inlined from 'devm_kcalloc' at include/linux/device.h:328:9,
    inlined from 'brcm_avs_get_freq_table' at drivers/cpufreq/brcmstb-avs-cpufreq.c:437:10,
    inlined from 'brcm_avs_cpufreq_init' at drivers/cpufreq/brcmstb-avs-cpufreq.c:623:15:
include/linux/device.h:323:16: note: at offset 60 into object of size 60 allocated by 'devm_kmalloc'
  323 |         return devm_kmalloc(dev, bytes, flags);
      |                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -Warray-bounds.

Link: https://github.com/KSPP/linux/issues/324
Fixes: de322e085995 ("cpufreq: brcmstb-avs-cpufreq: AVS CPUfreq driver for Broadcom STB SoCs")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: stm32 - fix loop iterating through scatterlist for DMA

commit d9c83f71eeceed2cb54bb78be84f2d4055fd9a1f upstream.

We were reading the length of the scatterlist sg after copying value of
tsg inside.
So we are using the size of the previous scatterlist and for the first
one we are using an unitialised value.
Fix this by copying tsg in sg[0] before reading the size.

Fixes : 8a1012d3f2ab ("crypto: stm32 - Support for STM32 HASH module")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/dasd: fix string length handling

commit f7cf22424665043787a96a66a048ff6b2cfd473c upstream.

Building dasd_eckd.o with latest clang reveals this bug:

    CC      drivers/s390/block/dasd_eckd.o
      drivers/s390/block/dasd_eckd.c:1082:3: warning: 'snprintf' will always be truncated;
      specified size is 1, but format string expands to at least 11 [-Wfortify-source]
       1082 |                 snprintf(print_uid, sizeof(*print_uid),
            |                 ^
      drivers/s390/block/dasd_eckd.c:1087:3: warning: 'snprintf' will always be truncated;
      specified size is 1, but format string expands to at least 10 [-Wfortify-source]
       1087 |                 snprintf(print_uid, sizeof(*print_uid),
            |                 ^

Fix this by moving and using the existing UID_STRLEN for the arrays
that are being written to. Also rename UID_STRLEN to DASD_UID_STRLEN
to clarify its scope.

Fixes: 23596961b437 ("s390/dasd: split up dasd_eckd_read_conf")
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com> # build
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://github.com/ClangBuiltLinux/linux/issues/1923
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20230828153142.2843753-2-hca@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/ipl: add missing secure/has_secure file to ipl type 'unknown'

commit ea5717cb13468323a7c3dd394748301802991f39 upstream.

OS installers are relying on /sys/firmware/ipl/has_secure to be
present on machines supporting secure boot. This file is present
for all IPL types, but not the unknown type, which prevents a secure
installation when an LPAR is booted in HMC via FTP(s), because
this is an unknown IPL type in linux. While at it, also add the secure
file.

Fixes: c9896acc7851 ("s390/ipl: Provide has_secure sysfs attribute")
Cc: stable@vger.kernel.org
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/dcssblk: fix kernel crash with list_add corruption

commit c8f40a0bccefd613748d080147469a4652d6e74c upstream.

Commit fb08a1908cb1 ("dax: simplify the dax_device <-> gendisk
association") introduced new logic for gendisk association, requiring
drivers to explicitly call dax_add_host() and dax_remove_host().

For dcssblk driver, some dax_remove_host() calls were missing, e.g. in
device remove path. The commit also broke error handling for out_dax case
in device add path, resulting in an extra put_device() w/o the previous
get_device() in that case.

This lead to stale xarray entries after device add / remove cycles. In the
case when a previously used struct gendisk pointer (xarray index) would be
used again, because blk_alloc_disk() happened to return such a pointer, the
xa_insert() in dax_add_host() would fail and go to out_dax, doing the extra
put_device() in the error path. In combination with an already flawed error
handling in dcssblk (device_register() cleanup), which needs to be
addressed in a separate patch, this resulted in a missing device_del() /
klist_del(), and eventually in the kernel crash with list_add corruption on
a subsequent device_add() / klist_add().

Fix this by adding the missing dax_remove_host() calls, and also move the
put_device() in the error path to restore the previous logic.

Fixes: fb08a1908cb1 ("dax: simplify the dax_device <-> gendisk association")
Cc: <stable@vger.kernel.org> # 5.17+
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: sdei: abort running SDEI handlers during crash

commit 5cd474e57368f0957c343bb21e309cf82826b1ef upstream.

Interrupts are blocked in SDEI context, per the SDEI spec: "The client
interrupts cannot preempt the event handler." If we crashed in the SDEI
handler-running context (as with ACPI's AGDI) then we need to clean up the
SDEI state before proceeding to the crash kernel so that the crash kernel
can have working interrupts.

Track the active SDEI handler per-cpu so that we can COMPLETE_AND_RESUME
the handler, discarding the interrupted context.

Fixes: f5df26961853 ("arm64: kernel: Add arch-specific SDEI entry code and CPU masking")
Signed-off-by: D Scott Phillips <scott@os.amperecomputing.com>
Cc: stable@vger.kernel.org
Reviewed-by: James Morse <james.morse@arm.com>
Tested-by: Mihai Carabas <mihai.carabas@oracle.com>
Link: https://lore.kernel.org/r/20230627002939.2758-1-scott@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pstore/ram: Check start of empty przs during init

commit fe8c3623ab06603eb760444a032d426542212021 upstream.

After commit 30696378f68a ("pstore/ram: Do not treat empty buffers as
valid"), initialization would assume a prz was valid after seeing that
the buffer_size is zero (regardless of the buffer start position). This
unchecked start value means it could be outside the bounds of the buffer,
leading to future access panics when written to:

 sysdump_panic_event+0x3b4/0x5b8
 atomic_notifier_call_chain+0x54/0x90
 panic+0x1c8/0x42c
 die+0x29c/0x2a8
 die_kernel_fault+0x68/0x78
 __do_kernel_fault+0x1c4/0x1e0
 do_bad_area+0x40/0x100
 do_translation_fault+0x68/0x80
 do_mem_abort+0x68/0xf8
 el1_da+0x1c/0xc0
 __raw_writeb+0x38/0x174
 __memcpy_toio+0x40/0xac
 persistent_ram_update+0x44/0x12c
 persistent_ram_write+0x1a8/0x1b8
 ramoops_pstore_write+0x198/0x1e8
 pstore_console_write+0x94/0xe0
 ...

To avoid this, also check if the prz start is 0 during the initialization
phase. If not, the next prz sanity check case will discover it (start >
size) and zap the buffer back to a sane state.

Fixes: 30696378f68a ("pstore/ram: Do not treat empty buffers as valid")
Cc: Yunlong Xing <yunlong.xing@unisoc.com>
Cc: stable@vger.kernel.org
Signed-off-by: Enlin Mu <enlin.mu@unisoc.com>
Link: https://lore.kernel.org/r/20230801060432.1307717-1-yunlong.xing@unisoc.com
[kees: update commit log with backtrace and clarifications]
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: renesas_sdhi: register irqs before registering controller

commit 74f45de394d979cc7770271f92fafa53e1ed3119 upstream.

IRQs should be ready to serve when we call mmc_add_host() via
tmio_mmc_host_probe(). To achieve that, ensure that all irqs are masked
before registering the handlers.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230712140011.18602-1-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/chrome: chromeos_acpi: print hex string for ACPI_TYPE_BUFFER

commit 0820debb7d489e9eb1f68b7bb69e6ae210699b3f upstream.

`element->buffer.pointer` should be binary blob.  `%s` doesn't work
perfect for them.

Print hex string for ACPI_TYPE_BUFFER.  Also update the documentation
to reflect this.

Fixes: 0a4cad9c11ad ("platform/chrome: Add ChromeOS ACPI device driver")
Cc: stable@vger.kernel.org
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230803011245.3773756-1-tzungbi@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/MCE: Always save CS register on AMD Zen IF Poison errors

commit 4240e2ebe67941ce2c4f5c866c3af4b5ac7a0c67 upstream.

The Instruction Fetch (IF) units on current AMD Zen-based systems do not
guarantee a synchronous #MC is delivered for poison consumption errors.
Therefore, MCG_STATUS[EIPV|RIPV] will not be set. However, the
microarchitecture does guarantee that the exception is delivered within
the same context. In other words, the exact rIP is not known, but the
context is known to not have changed.

There is no architecturally-defined method to determine this behavior.

The Code Segment (CS) register is always valid on such IF unit poison
errors regardless of the value of MCG_STATUS[EIPV|RIPV].

Add a quirk to save the CS register for poison consumption from the IF
unit banks.

This is needed to properly determine the context of the error.
Otherwise, the severity grading function will assume the context is
IN_KERNEL due to the m->cs value being 0 (the initialized value). This
leads to unnecessary kernel panics on data poison errors due to the
kernel believing the poison consumption occurred in kernel context.

Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230814200853.29258-1-yazen.ghannam@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fsverity: skip PKCS#7 parser when keyring is empty

commit 919dc320956ea353a7fb2d84265195ad5ef525ac upstream.

If an fsverity builtin signature is given for a file but the
".fs-verity" keyring is empty, there's no real reason to run the PKCS#7
parser.  Skip this to avoid the PKCS#7 attack surface when builtin
signature support is configured into the kernel but is not being used.

This is a hardening improvement, not a fix per se, but I've added
Fixes and Cc stable to get it out to more users.

Fixes: 432434c9f8e1 ("fs-verity: support builtin file signatures")
Cc: stable@vger.kernel.org
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20230820173237.2579-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: handle ARPHRD_PPP in dev_is_mac_header_xmit()

commit a4f39c9f14a634e4cd35fcd338c239d11fcc73fc upstream.

The goal is to support a bpf_redirect() from an ethernet device (ingress)
to a ppp device (egress).
The l2 header is added automatically by the ppp driver, thus the ethernet
header should be removed.

CC: stable@vger.kernel.org
Fixes: 27b29f63058d ("bpf: add bpf_redirect() helper")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Tested-by: Siwar Zitouni <siwar.zitouni@6wind.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

X.509: if signature is unsupported skip validation

commit ef5b52a631f8c18353e80ccab8408b963305510c upstream.

When the hash algorithm for the signature is not available the digest size
is 0 and the signature in the certificate is marked as unsupported.

When validating a self-signed certificate, this needs to be checked,
because otherwise trying to validate the signature will fail with an
warning:

Loading compiled-in X.509 certificates
WARNING: CPU: 0 PID: 1 at crypto/rsa-pkcs1pad.c:537 \
pkcs1pad_verify+0x46/0x12c
...
Problem loading in-kernel X.509 certificate (-22)

Signed-off-by: Thore Sommer <public@thson.de>
Cc: stable@vger.kernel.org # v4.7+
Fixes: 6c2dc5ae4ab7 ("X.509: Extract signature digest and make self-signed cert checks earlier")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

r8169: fix ASPM-related issues on a number of systems with NIC version from RTL8168h

commit 90ca51e8c654699b672ba61aeaa418dfb3252e5e upstream.

This effectively reverts 4b5f82f6aaef. On a number of systems ASPM L1
causes tx timeouts with RTL8168h, see referenced bug report.

Fixes: 4b5f82f6aaef ("r8169: enable ASPM L1/L1.1 from RTL8168h")
Cc: stable@vger.kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217814
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/sev: Make enc_dec_hypercall() accept a size instead of npages

commit ac3f9c9f1b37edaa7d1a9b908bc79d843955a1a2 upstream.

enc_dec_hypercall() accepted a page count instead of a size, which
forced its callers to round up. As a result, non-page aligned
vaddrs caused pages to be spuriously marked as decrypted via the
encryption status hypercall, which in turn caused consistent
corruption of pages during live migration. Live migration requires
accurate encryption status information to avoid migrating pages
from the wrong perspective.

Fixes: 064ce6c550a0 ("mm: x86: Invoke hypercall when page encryption status is changed")
Signed-off-by: Steve Rutherford <srutherford@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Tested-by: Ben Hillier <bhillier@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230824223731.2055016-1-srutherford@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dccp: Fix out of bounds access in DCCP error handler

commit 977ad86c2a1bcaf58f01ab98df5cc145083c489c upstream.

There was a previous attempt to fix an out-of-bounds access in the DCCP
error handlers, but that fix assumed that the error handlers only want
to access the first 8 bytes of the DCCP header. Actually, they also look
at the DCCP sequence number, which is stored beyond 8 bytes, so an
explicit pskb_may_pull() is required.

Fixes: 6706a97fec96 ("dccp: fix out of bound access in dccp_v4_err()")
Fixes: 1aa9d1a0e7ee ("ipv6: dccp: fix out of bound access in dccp_v6_err()")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dlm: fix plock lookup when using multiple lockspaces

commit 7c53e847ff5e97f033fdd31f71949807633d506b upstream.

All posix lock ops, for all lockspaces (gfs2 file systems) are
sent to userspace (dlm_controld) through a single misc device.
The dlm_controld daemon reads the ops from the misc device
and sends them to other cluster nodes using separate, per-lockspace
cluster api communication channels.  The ops for a single lockspace
are ordered at this level, so that the results are received in
the same sequence that the requests were sent.  When the results
are sent back to the kernel via the misc device, they are again
funneled through the single misc device for all lockspaces.  When
the dlm code in the kernel processes the results from the misc
device, these results will be returned in the same sequence that
the requests were sent, on a per-lockspace basis.  A recent change
in this request/reply matching code missed the "per-lockspace"
check (fsid comparison) when matching request and reply, so replies
could be incorrectly matched to requests from other lockspaces.

Cc: stable@vger.kernel.org
Reported-by: Barry Marson <bmarson@redhat.com>
Fixes: 57e2c2f2d94c ("fs: dlm: fix mismatch of plock results from userspace")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Fix issue in verifying allow_ptr_leaks

commit d75e30dddf73449bc2d10bb8e2f1a2c446bc67a2 upstream.

After we converted the capabilities of our networking-bpf program from
cap_sys_admin to cap_net_admin+cap_bpf, our networking-bpf program
failed to start. Because it failed the bpf verifier, and the error log
is "R3 pointer comparison prohibited".

A simple reproducer as follows,

SEC("cls-ingress")
int ingress(struct __sk_buff *skb)
{
struct iphdr *iph = (void *)(long)skb->data + sizeof(struct ethhdr);

if ((long)(iph + 1) > (long)skb->data_end)
return TC_ACT_STOLEN;
return TC_ACT_OK;
}

Per discussion with Yonghong and Alexei [1], comparison of two packet
pointers is not a pointer leak. This patch fixes it.

Our local kernel is 6.1.y and we expect this fix to be backported to
6.1.y, so stable is CCed.

[1]. https://lore.kernel.org/bpf/CAADnVQ+Nmspr7Si+pxWn8zkE7hX-7s93ugwC+94aXSy4uQ9vBg@mail.gmail.com/

Suggested-by: Yonghong Song <yonghong.song@linux.dev>
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230823020703.3790-2-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Add smu write msg id fail retry process

commit 72105dcfa3d12b5af49311f857e3490baa225135 upstream.

A benchmark stress test (12-40 machines x 48hours) found that DCN315 has
cases where DC writes to an indirect register to set the smu clock msg
id, but when we go to read the same indirect register the returned msg
id doesn't match with what we just set it to. So, to fix this retry the
write until the register's value matches with the requested value.

Cc: stable@vger.kernel.org # 6.1+
Fixes: f94903996140 ("drm/amd/display: Add DCN315 CLK_MGR")
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Fudong Wang <fudong.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Fix /proc/cpuinfo output for lscpu

commit 9f5ba4b3e1b3c123eeca5d2d09161e8720048b5c upstream.

The lscpu command is broken since commit cab56b51ec0e ("parisc: Fix
device names in /proc/iomem") added the PA pathname to all PA
devices, includig the CPUs.

lscpu parses /proc/cpuinfo and now believes it found different CPU
types since every CPU is listed with an unique identifier (PA
pathname).

Fix this problem by simply dropping the PA pathname when listing the
CPUs in /proc/cpuinfo. There is no need to show the pathname in this
procfs file.

Fixes: cab56b51ec0e ("parisc: Fix device names in /proc/iomem")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

procfs: block chmod on /proc/thread-self/comm

commit ccf61486fe1e1a48e18c638d1813cda77b3c0737 upstream.

Due to an oversight in commit 1b3044e39a89 ("procfs: fix pthread
cross-thread naming if !PR_DUMPABLE") in switching from REG to NOD,
chmod operations on /proc/thread-self/comm were no longer blocked as
they are on almost all other procfs files.

A very similar situation with /proc/self/environ was used to as a root
exploit a long time ago, but procfs has SB_I_NOEXEC so this is simply a
correctness issue.

Ref: https://lwn.net/Articles/191954/
Ref: 6d76fa58b050 ("Don't allow chmod() on the /proc/<pid>/ files")
Fixes: 1b3044e39a89 ("procfs: fix pthread cross-thread naming if !PR_DUMPABLE")
Cc: stable@vger.kernel.org # v4.7+
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Message-Id: <20230713141001.27046-1-cyphar@cyphar.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: don't add or resize partition on the disk with GENHD_FL_NO_PART

commit 1a721de8489fa559ff4471f73c58bb74ac5580d3 upstream.

Commit a33df75c6328 ("block: use an xarray for disk->part_tbl") remove
disk_expand_part_tbl() in add_partition(), which means all kinds of
devices will support extended dynamic `dev_t`.
However, some devices with GENHD_FL_NO_PART are not expected to add or
resize partition.
Fix this by adding check of GENHD_FL_NO_PART before add or resize
partition.

Fixes: a33df75c6328 ("block: use an xarray for disk->part_tbl")
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230831075900.1725842-1-lilingfeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "PCI: Mark NVIDIA T4 GPUs to avoid bus reset"

commit 5260bd6d36c83c5b269c33baaaf8c78e520908b0 upstream.

This reverts commit d5af729dc2071273f14cbb94abbc60608142fd83.

d5af729dc207 ("PCI: Mark NVIDIA T4 GPUs to avoid bus reset") avoided
Secondary Bus Reset on the T4 because the reset seemed to not work when the
T4 was directly attached to a Root Port.

But NVIDIA thinks the issue is probably related to some issue with the Root
Port, not with the T4.  The T4 provides neither PM nor FLR reset, so
masking bus reset compromises this device for assignment scenarios.

Revert d5af729dc207 as requested by Wu Zongyong.  This will leave SBR
broken in the specific configuration Wu tested, as it was in v6.5, so Wu
will debug that further.

Link: https://lore.kernel.org/r/ZPqMCDWvITlOLHgJ@wuzongyong-alibaba
Link: https://lore.kernel.org/r/20230908201104.GA305023@bhelgaas
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ntb: Fix calculation ntb_transport_tx_free_entry()

commit 5a7693e6bbf19b22fd6c1d2c4b7beb0a03969e2c upstream.

ntb_transport_tx_free_entry() never returns 0 with the current
calculation. If head == tail, then it would return qp->tx_max_entry.
Change compare to tail >= head and when they are equal, a 0 would be
returned.

Fixes: e74bfeedad08 ("NTB: Add flow control to the ntb_netdev")
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: renlonglong <ren.longlong@h3c.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ntb: Clean up tx tail index on link down

commit cc79bd2738c2d40aba58b2be6ce47dc0e471df0e upstream.

The tx tail index is not reset when the link goes down. This causes the
tail index to go out of sync when the link goes down and comes back up.
Refactor the ntb_qp_link_down_reset() and reset the tail index as well.

Fixes: 2849b5d70641 ("NTB: Reset transport QP link stats on down")
Reported-by: Yuan Y Lu <yuan.y.lu@intel.com>
Tested-by: Yuan Y Lu <yuan.y.lu@intel.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ntb: Drop packets when qp link is down

commit f195a1a6fe416882984f8bd6c61afc1383171860 upstream.

Currently when the transport receive packets after netdev has closed the
transport returns error and triggers tx errors to be incremented and
carrier to be stopped. There is no reason to return error if the device is
already closed. Drop the packet and return 0.

Fixes: e26a5843f7f5 ("NTB: Split ntb_hw_intel and ntb_transport drivers")
Reported-by: Yuan Y Lu <yuan.y.lu@intel.com>
Tested-by: Yuan Y Lu <yuan.y.lu@intel.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI/PM: Only read PCI_PM_CTRL register when available

commit 5694ba13b004eea683c6d4faeb6d6e7a9636bda0 upstream.

For a device with no Power Management Capability, pci_power_up() previously
returned 0 (success) if the platform was able to put the device in D0,
which led to pci_set_full_power_state() trying to read PCI_PM_CTRL, even
though it doesn't exist.

Since dev->pm_cap == 0 in this case, pci_set_full_power_state() actually
read the wrong register, interpreted it as PCI_PM_CTRL, and corrupted
dev->current_state.  This led to messages like this in some cases:

  pci 0000:01:00.0: Refused to change power state from D3hot to D0

To prevent this, make pci_power_up() always return a negative failure code
if the device lacks a Power Management Capability, even if non-PCI platform
power management has been able to put the device in D0.  The failure will
prevent pci_set_full_power_state() from trying to access PCI_PM_CTRL.

Fixes: e200904b275c ("PCI/PM: Split pci_power_up()")
Link: https://lore.kernel.org/r/20230824013738.1894965-1-chenfeiyang@loongson.cn
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: stable@vger.kernel.org # v5.19+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: hv: Fix a crash in hv_pci_restore_msi_msg() during hibernation

commit 04bbe863241a9be7d57fb4cf217ee4a72f480e70 upstream.

When a Linux VM with an assigned PCI device runs on Hyper-V, if the PCI
device driver is not loaded yet (i.e. MSI-X/MSI is not enabled on the
device yet), doing a VM hibernation triggers a panic in
hv_pci_restore_msi_msg() -> msi_lock_descs(&pdev->dev), because
pdev->dev.msi.data is still NULL.

Avoid the panic by checking if MSI-X/MSI is enabled.

Link: https://lore.kernel.org/r/20230816175939.21566-1-decui@microsoft.com
Fixes: dc2b453290c4 ("PCI: hv: Rework MSI handling")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: sathyanarayanan.kuppuswamy@linux.intel.com
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Free released resource after coalescing

commit 8ec9c1d5d0a5a4744516adb483b97a238892f9d5 upstream.

release_resource() doesn't actually free the resource or resource list
entry so free the resource list entry to avoid a leak.

Closes: https://lore.kernel.org/r/878r9sga1t.fsf@kernel.org/
Fixes: e54223275ba1 ("PCI: Release resource invalidated by coalescing")
Link: https://lore.kernel.org/r/20230906110846.225369-1-ross.lagerwall@citrix.com
Reported-by: Kalle Valo <kvalo@kernel.org>
Tested-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v5.16+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: mpt3sas: Perform additional retries if doorbell read returns 0

commit 4ca10f3e31745d35249a727ecd108eb58f0a8c5e upstream.

The driver retries certain register reads 3 times if the returned value is
0. This was done because the controller could return 0 for certain
registers if other registers were being accessed concurrently by the BMC.

In certain systems with increased BMC interactions, the register values
returned can be 0 for longer than 3 retries. Change the retry count from 3
to 30 for the affected registers to prevent problems with out-of-band
management.

Fixes: b899202901a8 ("scsi: mpt3sas: Add separate function for aero doorbell reads")
Cc: stable@vger.kernel.org
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20230829090020.5417-2-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "scsi: qla2xxx: Fix buffer overrun"

commit 641671d97b9199f1ba35ccc2222d4b189a6a5de5 upstream.

Revert due to Get PLOGI Template failed.
This reverts commit b68710a8094fdffe8dd4f7a82c82649f479bb453.

Cc: stable@vger.kernel.org
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230821130045.34850-9-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: venus: hfi_venus: Write to VIDC_CTRL_INIT after unmasking interrupts

commit d74e481609808330b4625b3691cf01e1f56e255e upstream.

The startup procedure shouldn't be started with interrupts masked, as that
may entail silent failures.

Kick off initialization only after the interrupts are unmasked.

Cc: stable@vger.kernel.org # v4.12+
Fixes: d96d3f30c0f2 ("[media] media: venus: hfi: add Venus HFI files")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: dvb: symbol fixup for dvb_attach()

commit 86495af1171e1feec79faa9b64c05c89f46e41d1 upstream.

In commit 9011e49d54dc ("modules: only allow symbol_get of
EXPORT_SYMBOL_GPL modules") the use of symbol_get is properly restricted
to GPL-only marked symbols.  This interacts oddly with the DVB logic
which only uses dvb_attach() to load the dvb driver which then uses
symbol_get().

Fix this up by properly marking all of the dvb_attach attach symbols as
EXPORT_SYMBOL_GPL().

Fixes: 9011e49d54dc ("modules: only allow symbol_get of EXPORT_SYMBOL_GPL modules")
Cc: stable <stable@kernel.org>
Reported-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: linux-media@vger.kernel.org
Cc: linux-modules@vger.kernel.org
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://lore.kernel.org/r/20230908092035.3815268-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/cirrus: Fix broken audio on hardware with two CS42L42 codecs.

commit 99bf5b0baac941176a6a3d5cef7705b29808de34 upstream.

Recently in v6.3-rc1 there was a change affecting behaviour of hrtimers
(commit 0c52310f260014d95c1310364379772cb74cf82d) and causing
few issues on platforms with two CS42L42 codecs. Canonical/Dell
has reported an issue with Vostro-3910.
We need to increase this value by 15ms.

Link: https://bugs.launchpad.net/somerville/+bug/2031060
Fixes: 9fb9fa18fb50 ("ALSA: hda/cirrus: Add extra 10 ms delay to allow PLL settle and lock.")
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230904160033.908135-1-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: csum: Fix OoB access in IP checksum code for negative lengths

commit 8bd795fedb8450ecbef18eeadbd23ed8fc7630f5 upstream.

Although commit c2c24edb1d9c ("arm64: csum: Fix pathological zero-length
calls") added an early return for zero-length input, syzkaller has
popped up with an example of a _negative_ length which causes an
undefined shift and an out-of-bounds read:

 | BUG: KASAN: slab-out-of-bounds in do_csum+0x44/0x254 arch/arm64/lib/csum.c:39
 | Read of size 4294966928 at addr ffff0000d7ac0170 by task syz-executor412/5975
 |
 | CPU: 0 PID: 5975 Comm: syz-executor412 Not tainted 6.4.0-rc4-syzkaller-g908f31f2a05b #0
 | Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023
 | Call trace:
 |  dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:233
 |  show_stack+0x2c/0x44 arch/arm64/kernel/stacktrace.c:240
 |  __dump_stack lib/dump_stack.c:88 [inline]
 |  dump_stack_lvl+0xd0/0x124 lib/dump_stack.c:106
 |  print_address_description mm/kasan/report.c:351 [inline]
 |  print_report+0x174/0x514 mm/kasan/report.c:462
 |  kasan_report+0xd4/0x130 mm/kasan/report.c:572
 |  kasan_check_range+0x264/0x2a4 mm/kasan/generic.c:187
 |  __kasan_check_read+0x20/0x30 mm/kasan/shadow.c:31
 |  do_csum+0x44/0x254 arch/arm64/lib/csum.c:39
 |  csum_partial+0x30/0x58 lib/checksum.c:128
 |  gso_make_checksum include/linux/skbuff.h:4928 [inline]
 |  __udp_gso_segment+0xaf4/0x1bc4 net/ipv4/udp_offload.c:332
 |  udp6_ufo_fragment+0x540/0xca0 net/ipv6/udp_offload.c:47
 |  ipv6_gso_segment+0x5cc/0x1760 net/ipv6/ip6_offload.c:119
 |  skb_mac_gso_segment+0x2b4/0x5b0 net/core/gro.c:141
 |  __skb_gso_segment+0x250/0x3d0 net/core/dev.c:3401
 |  skb_gso_segment include/linux/netdevice.h:4859 [inline]
 |  validate_xmit_skb+0x364/0xdbc net/core/dev.c:3659
 |  validate_xmit_skb_list+0x94/0x130 net/core/dev.c:3709
 |  sch_direct_xmit+0xe8/0x548 net/sched/sch_generic.c:327
 |  __dev_xmit_skb net/core/dev.c:3805 [inline]
 |  __dev_queue_xmit+0x147c/0x3318 net/core/dev.c:4210
 |  dev_queue_xmit include/linux/netdevice.h:3085 [inline]
 |  packet_xmit+0x6c/0x318 net/packet/af_packet.c:276
 |  packet_snd net/packet/af_packet.c:3081 [inline]
 |  packet_sendmsg+0x376c/0x4c98 net/packet/af_packet.c:3113
 |  sock_sendmsg_nosec net/socket.c:724 [inline]
 |  sock_sendmsg net/socket.c:747 [inline]
 |  __sys_sendto+0x3b4/0x538 net/socket.c:2144

Extend the early return to reject negative lengths as well, aligning our
implementation with the generic code in lib/checksum.c

Cc: Robin Murphy <robin.murphy@arm.com>
Fixes: 5777eaed566a ("arm64: Implement optimised checksum routine")
Reported-by: syzbot+4a9f9820bd8d302e22f7@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/000000000000e0e94c0603f8d213@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i3c: master: svc: fix probe failure when no i3c device exist

commit 6e13d6528be2f7e801af63c8153b87293f25d736 upstream.

I3C masters are expected to support hot-join. This means at initialization
time we might not yet discover any device and this should not be treated
as a fatal error.

During the DAA procedure which happens at probe time, if no device has
joined, all CCC will be NACKed (from a bus perspective). This leads to an
early return with an error code which fails the probe of the master.

Let's avoid this by just telling the core through an I3C_ERROR_M2
return command code that no device was discovered, which is a valid
situation. This way the master will no longer bail out and fail to probe
for a wrong reason.

Cc: stable@vger.kernel.org
Fixes: dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230831141324.2841525-1-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

LoongArch: mm: Add p?d_leaf() definitions

commit 303be4b33562a5b689261ced1616bf16ad49efa7 upstream.

When I do LTP test, LTP test case ksm06 caused panic at
break_ksm_pmd_entry
  -> pmd_leaf (Huge page table but False)
  -> pte_present (panic)

The reason is pmd_leaf() is not defined, So like commit 501b81046701
("mips: mm: add p?d_leaf() definitions") add p?d_leaf() definition for
LoongArch.

Fixes: 09cfefb7fa70 ("LoongArch: Add memory management")
Cc: stable@vger.kernel.org
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xtensa: PMU: fix base address for the newer hardware

commit 687eb3c42f4ad81e7c947c50e2d865f692064291 upstream.

With introduction of ERI access control in RG.0 base address of the PMU
unit registers has changed. Add support for the new PMU configuration.

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: register edp_backlight_control() for DCN301

commit 1611917f39bee1abfc01501238db8ac19649042d upstream.

As made mention of in commit 099303e9a9bd ("drm/amd/display: eDP
intermittent black screen during PnP"), we need to turn off the
display's backlight before powering off an eDP display. Not doing so
will result in undefined behaviour according to the eDP spec. So, set
DCN301's edp_backlight_control() function pointer to
dce110_edp_backlight_control().

Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2765
Fixes: 9c75891feef0 ("drm/amd/display: rework recent update PHY state commit")
Suggested-by: Swapnil Patel <swapnil.patel@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

backlight/lv5207lp: Compare against struct fb_info.device

commit 1ca8819320fd84e7d95b04e7668efc5f9fe9fa5c upstream.

Struct lv5207lp_platform_data refers to a platform device within
the Linux device hierarchy. The test in lv5207lp_backlight_check_fb()
compares it against the fbdev device in struct fb_info.dev, which
is different. Fix the test by comparing to struct fb_info.device.

Fixes a bug in the backlight driver and prepares fbdev for making
struct fb_info.dev optional.

v2:
* move renames into separate patch (Javier, Sam, Michael)

Fixes: 82e5c40d88f9 ("backlight: Add Sanyo LV5207LP backlight driver")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Lee Jones <lee@kernel.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: linux-sh@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.12+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-6-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

backlight/bd6107: Compare against struct fb_info.device

commit 992bdddaabfba19bdc77c1c7a4977b2aa41ec891 upstream.

Struct bd6107_platform_data refers to a platform device within
the Linux device hierarchy. The test in bd6107_backlight_check_fb()
compares it against the fbdev device in struct fb_info.dev, which
is different. Fix the test by comparing to struct fb_info.device.

Fixes a bug in the backlight driver and prepares fbdev for making
struct fb_info.dev optional.

v2:
* move renames into separate patch (Javier, Sam, Michael)

Fixes: 67b43e590415 ("backlight: Add ROHM BD6107 backlight driver")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Lee Jones <lee@kernel.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.12+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-2-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

backlight/gpio_backlight: Compare against struct fb_info.device

commit 7b91d017f77c1bda56f27c2f4bbb70de7c6eca08 upstream.

Struct gpio_backlight_platform_data refers to a platform device within
the Linux device hierarchy. The test in gpio_backlight_check_fb()
compares it against the fbdev device in struct fb_info.dev, which
is different. Fix the test by comparing to struct fb_info.device.

Fixes a bug in the backlight driver and prepares fbdev for making
struct fb_info.dev optional.

v2:
* move renames into separate patch (Javier, Sam, Michael)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 8b770e3c9824 ("backlight: Add GPIO-based backlight driver")
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Lee Jones <lee@kernel.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: linux-sh@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.12+
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-4-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: break iopolling on signal

commit dc314886cb3d0e4ab2858003e8de2917f8a3ccbd upstream.

Don't keep spinning iopoll with a signal set. It'll eventually return
back, e.g. by virtue of need_resched(), but it's not a nice user
experience.

Cc: stable@vger.kernel.org
Fixes: def596e9557c9 ("io_uring: support for IO polling")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/eeba551e82cad12af30c3220125eb6cb244cc94c.1691594339.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

XArray: Do not return sibling entries from xa_load()

commit cbc02854331edc6dc22d8b77b6e22e38ebc7dd51 upstream.

It is possible for xa_load() to observe a sibling entry pointing to
another sibling entry.  An example:

Thread A: Thread B:
xa_store_range(xa, entry, 188, 191, gfp);
xa_load(xa, 191);
entry = xa_entry(xa, node, 63);
[entry is a sibling of 188]
xa_store_range(xa, entry, 184, 191, gfp);
if (xa_is_sibling(entry))
offset = xa_to_sibling(entry);
entry = xa_entry(xas->xa, node, offset);
[entry is now a sibling of 184]

It is sufficient to go around this loop until we hit a non-sibling entry.
Sibling entries always point earlier in the node, so we are guaranteed
to terminate this search.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Fixes: 6b24ca4a1a8d ("mm: Use multi-index entries in the page cache")
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: OMAP2+: Fix -Warray-bounds warning in _pwrdm_state_switch()

commit 847fb80cc01a54bc827b02547bb8743bdb59ddab upstream.

If function pwrdm_read_prev_pwrst() returns -EINVAL, we will end
up accessing array pwrdm->state_counter through negative index
-22. This is wrong and the compiler is legitimately warning us
about this potential problem.

Fix this by sanity checking the value stored in variable _prev_
before accessing array pwrdm->state_counter.

Address the following -Warray-bounds warning:
arch/arm/mach-omap2/powerdomain.c:178:45: warning: array subscript -22 is below array bounds of 'unsigned int[4]' [-Warray-bounds]

Link: https://github.com/KSPP/linux/issues/307
Fixes: ba20bb126940 ("OMAP: PM counter infrastructure.")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/20230607050639.LzbPn%25lkp@intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Message-ID: <ZIFVGwImU3kpaGeH@work>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipmi_si: fix a memleak in try_smi_init()

commit 6cf1a126de2992b4efe1c3c4d398f8de4aed6e3f upstream.

Kmemleak reported the following leak info in try_smi_init():

unreferenced object 0xffff00018ecf9400 (size 1024):
  comm "modprobe", pid 2707763, jiffies 4300851415 (age 773.308s)
  backtrace:
    [<000000004ca5b312>] __kmalloc+0x4b8/0x7b0
    [<00000000953b1072>] try_smi_init+0x148/0x5dc [ipmi_si]
    [<000000006460d325>] 0xffff800081b10148
    [<0000000039206ea5>] do_one_initcall+0x64/0x2a4
    [<00000000601399ce>] do_init_module+0x50/0x300
    [<000000003c12ba3c>] load_module+0x7a8/0x9e0
    [<00000000c246fffe>] __se_sys_init_module+0x104/0x180
    [<00000000eea99093>] __arm64_sys_init_module+0x24/0x30
    [<0000000021b1ef87>] el0_svc_common.constprop.0+0x94/0x250
    [<0000000070f4f8b7>] do_el0_svc+0x48/0xe0
    [<000000005a05337f>] el0_svc+0x24/0x3c
    [<000000005eb248d6>] el0_sync_handler+0x160/0x164
    [<0000000030a59039>] el0_sync+0x160/0x180

The problem was that when an error occurred before handlers registration
and after allocating `new_smi->si_sm`, the variable wouldn't be freed in
the error handling afterwards since `shutdown_smi()` hadn't been
registered yet. Fix it by adding a `kfree()` in the error handling path
in `try_smi_init()`.

Cc: stable@vger.kernel.org # 4.19+
Fixes: 7960f18a5647 ("ipmi_si: Convert over to a shutdown handler")
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Co-developed-by: GONG, Ruiqi <gongruiqi@huaweicloud.com>
Signed-off-by: GONG, Ruiqi <gongruiqi@huaweicloud.com>
Message-Id: <20230629123328.2402075-1-gongruiqi@huaweicloud.com>
Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: rockchip: Use 64-bit mask on MSI 64-bit PCI address

commit cdb50033dd6dfcf02ae3d4ee56bc1a9555be6d36 upstream.

A 32-bit mask was used on the 64-bit PCI address used for mapping MSIs.
This would result in the upper 32 bits being unintentionally zeroed and
MSIs getting mapped to incorrect PCI addresses if the address had any
of the upper bits set.

Replace 32-bit mask by appropriate 64-bit mask.

[kwilczynski: use GENMASK_ULL() over GENMASK() for 32-bit compatibility]
Fixes: dc73ed0f1b8b ("PCI: rockchip: Fix window mapping and address translation for endpoint")
Closes: https://lore.kernel.org/linux-pci/8d19e5b7-8fa0-44a4-90e2-9bb06f5eb694@moroto.mountain
Link: https://lore.kernel.org/linux-pci/20230703085845.2052008-1-rick.wertenbroek@gmail.com
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: i2c: Add a camera sensor top level menu

commit 7d3c7d2a2914e10bec3b9cdacdadb8e1f65f715a upstream.

Select V4L2_FWNODE and VIDEO_V4L2_SUBDEV_API for all sensor drivers. This
also adds the options to drivers that don't specifically need them, these
are still seldom used drivers using old APIs. The upside is that these
should now all compile --- many drivers have had missing dependencies.

The "menu" is replaced by selectable "menuconfig" to select the needed
V4L2_FWNODE and VIDEO_V4L2_SUBDEV_API options.

Also select MEDIA_CONTROLLER which VIDEO_V4L2_SUBDEV_API effectively
depends on, and add the I2C dependency to the menu.

Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: stable@vger.kernel.org # for >= 6.1
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: i2c: ccs: Check rules is non-NULL

commit 607bcc4213d998d051541d8f10b5bbb7d546c0be upstream.

Fix the following smatch warning:

drivers/media/i2c/ccs/ccs-data.c:524 ccs_data_parse_rules() warn: address
of NULL pointer 'rules'

The CCS static data rule parser does not check an if rule has been
obtained before checking for other rule types (which depend on the if
rule). In practice this means parsing invalid CCS static data could lead
to dereferencing a NULL pointer.

Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Fixes: a6b396f410b1 ("media: ccs: Add CCS static data parser library")
Cc: stable@vger.kernel.org # for 5.11 and up
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpu/hotplug: Prevent self deadlock on CPU hot-unplug

commit 2b8272ff4a70b866106ae13c36be7ecbef5d5da2 upstream.

Xiongfeng reported and debugged a self deadlock of the task which initiates
and controls a CPU hot-unplug operation vs. the CFS bandwidth timer.

    CPU1                          CPU2

T1 sets cfs_quota
   starts hrtimer cfs_bandwidth 'period_timer'
T1 is migrated to CPU2
T1 initiates offlining of CPU1
Hotplug operation starts
  ...
'period_timer' expires and is re-enqueued on CPU1
  ...
take_cpu_down()
  CPU1 shuts down and does not handle timers
  anymore. They have to be migrated in the
  post dead hotplug steps by the control task.

T1 runs the post dead offline operation
       T1 is scheduled out
T1 waits for 'period_timer' to expire

T1 waits there forever if it is scheduled out before it can execute the hrtimer
offline callback hrtimers_dead_cpu().

Cure this by delegating the hotplug control operation to a worker thread on
an online CPU. This takes the initiating user space task, which might be
affected by the bandwidth timer, completely out of the picture.

Reported-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Yu Liao <liaoyu15@huawei.com>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/8e785777-03aa-99e1-d20e-e956f5685be6@huawei.com
Link: https://lore.kernel.org/r/87h6oqdq0i.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/vmalloc: add a safer version of find_vm_area() for debug

commit 0818e739b5c061b0251c30152380600fb9b84c0c upstream.

It is unsafe to dump vmalloc area information when trying to do so from
some contexts.  Add a safer trylock version of the same function to do a
best-effort VMA finding and use it from vmalloc_dump_obj().

[applied test robot feedback on unused function fix.]
[applied Uladzislau feedback on locking.]
Link: https://lkml.kernel.org/r/20230904180806.1002832-1-joel@joelfernandes.org
Fixes: 98f180837a89 ("mm: Make mem_dump_obj() handle vmalloc() memory")
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reported-by: Zhen Lei <thunder.leizhen@huaweicloud.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Zqiang <qiang.zhang1211@gmail.com>
Cc: <stable@vger.kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: core: Fix the scsi_set_resid() documentation

commit f669b8a683e4ee26fa5cafe19d71cec1786b556a upstream.

Because scsi_finish_command() subtracts the residual from the buffer
length, residual overflows must not be reported. Reflect this in the SCSI
documentation. See also commit 9237f04e12cc ("scsi: core: Fix
scsi_get/set_resid() interface")

Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230721160154.874010-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

printk: ringbuffer: Fix truncating buffer size min_t cast

commit 53e9e33ede37a247d926db5e4a9e56b55204e66c upstream.

If an output buffer size exceeded U16_MAX, the min_t(u16, ...) cast in
copy_data() was causing writes to truncate. This manifested as output
bytes being skipped, seen as %NUL bytes in pstore dumps when the available
record size was larger than 65536. Fix the cast to no longer truncate
the calculation.

Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: John Ogness <john.ogness@linutronix.de>
Reported-by: Vijay Balakrishna <vijayb@linux.microsoft.com>
Link: https://lore.kernel.org/lkml/d8bb1ec7-a4c5-43a2-9de0-9643a70b899f@linux.microsoft.com/
Fixes: b6cf8b3f3312 ("printk: add lockless ringbuffer")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Vijay Balakrishna <vijayb@linux.microsoft.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck
Reviewed-by: Tyler Hicks (Microsoft) <code@tyhicks.com>
Tested-by: Tyler Hicks (Microsoft) <code@tyhicks.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230811054528.never.165-kees@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rcu: dump vmalloc memory info safely

commit c83ad36a18c02c0f51280b50272327807916987f upstream.

Currently, for double invoke call_rcu(), will dump rcu_head objects memory
info, if the objects is not allocated from the slab allocator, the
vmalloc_dump_obj() will be invoke and the vmap_area_lock spinlock need to
be held, since the call_rcu() can be invoked in interrupt context,
therefore, there is a possibility of spinlock deadlock scenarios.

And in Preempt-RT kernel, the rcutorture test also trigger the following
lockdep warning:

BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 1, name: swapper/0
preempt_count: 1, expected: 0
RCU nest depth: 1, expected: 1
3 locks held by swapper/0/1:
 #0: ffffffffb534ee80 (fullstop_mutex){+.+.}-{4:4}, at: torture_init_begin+0x24/0xa0
 #1: ffffffffb5307940 (rcu_read_lock){....}-{1:3}, at: rcu_torture_init+0x1ec7/0x2370
 #2: ffffffffb536af40 (vmap_area_lock){+.+.}-{3:3}, at: find_vmap_area+0x1f/0x70
irq event stamp: 565512
hardirqs last  enabled at (565511): [<ffffffffb379b138>] __call_rcu_common+0x218/0x940
hardirqs last disabled at (565512): [<ffffffffb5804262>] rcu_torture_init+0x20b2/0x2370
softirqs last  enabled at (399112): [<ffffffffb36b2586>] __local_bh_enable_ip+0x126/0x170
softirqs last disabled at (399106): [<ffffffffb43fef59>] inet_register_protosw+0x9/0x1d0
Preemption disabled at:
[<ffffffffb58040c3>] rcu_torture_init+0x1f13/0x2370
CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W          6.5.0-rc4-rt2-yocto-preempt-rt+ #15
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
Call Trace:
 <TASK>
 dump_stack_lvl+0x68/0xb0
 dump_stack+0x14/0x20
 __might_resched+0x1aa/0x280
 ? __pfx_rcu_torture_err_cb+0x10/0x10
 rt_spin_lock+0x53/0x130
 ? find_vmap_area+0x1f/0x70
 find_vmap_area+0x1f/0x70
 vmalloc_dump_obj+0x20/0x60
 mem_dump_obj+0x22/0x90
 __call_rcu_common+0x5bf/0x940
 ? debug_smp_processor_id+0x1b/0x30
 call_rcu_hurry+0x14/0x20
 rcu_torture_init+0x1f82/0x2370
 ? __pfx_rcu_torture_leak_cb+0x10/0x10
 ? __pfx_rcu_torture_leak_cb+0x10/0x10
 ? __pfx_rcu_torture_init+0x10/0x10
 do_one_initcall+0x6c/0x300
 ? debug_smp_processor_id+0x1b/0x30
 kernel_init_freeable+0x2b9/0x540
 ? __pfx_kernel_init+0x10/0x10
 kernel_init+0x1f/0x150
 ret_from_fork+0x40/0x50
 ? __pfx_kernel_init+0x10/0x10
 ret_from_fork_asm+0x1b/0x30
 </TASK>

The previous patch fixes this by using the deadlock-safe best-effort
version of find_vm_area.  However, in case of failure print the fact that
the pointer was a vmalloc pointer so that we print at least something.

Link: https://lkml.kernel.org/r/20230904180806.1002832-2-joel@joelfernandes.org
Fixes: 98f180837a89 ("mm: Make mem_dump_obj() handle vmalloc() memory")
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reported-by: Zhen Lei <thunder.leizhen@huaweicloud.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pcm: Fix missing fixup call in compat hw_refine ioctl

commit 358040e3807754944dbddf948a23c6d914297ed7 upstream.

The update of rate_num/den and msbits were factored out to
fixup_unreferenced_params() function to be called explicitly after the
hw_refine or hw_params procedure.  It's called from
snd_pcm_hw_refine_user(), but it's forgotten in the PCM compat ioctl.
This ended up with the incomplete rate_num/den and msbits parameters
when 32bit compat ioctl is used.

This patch adds the missing call in snd_pcm_ioctl_hw_params_compat().

Reported-by: Meng_Cai@novatek.com.cn
Fixes: f9a076bff053 ("ALSA: pcm: calculate non-mask/non-interval parameters always when possible")
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230829134344.31588-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM / devfreq: Fix leak in devfreq_dev_release()

commit 5693d077595de721f9ddbf9d37f40e5409707dfe upstream.

srcu_init_notifier_head() allocates resources that need to be released
with a srcu_cleanup_notifier_head() call.

Reported by kmemleak.

Fixes: 0fe3a66410a3 ("PM / devfreq: Add new DEVFREQ_TRANSITION_NOTIFIER notifier")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

igb: set max size RX buffer when store bad packet is enabled

commit bb5ed01cd2428cd25b1c88a3a9cba87055eb289f upstream.

Increase the RX buffer size to 3K when the SBP bit is on. The size of
the RX buffer determines the number of pages allocated which may not
be sufficient for receive frames larger than the set MTU size.

Cc: stable@vger.kernel.org
Fixes: 89eaefb61dc9 ("igb: Support RX-ALL feature flag.")
Reported-by: Manfred Rudigier <manfred.rudigier@omicronenergy.com>
Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

skbuff: skb_segment, Call zero copy functions before using skbuff frags

commit 2ea35288c83b3d501a88bc17f2df8f176b5cc96f upstream.

Commit bf5c25d60861 ("skbuff: in skb_segment, call zerocopy functions
once per nskb") added the call to zero copy functions in skb_segment().
The change introduced a bug in skb_segment() because skb_orphan_frags()
may possibly change the number of fragments or allocate new fragments
altogether leaving nrfrags and frag to point to the old values. This can
cause a panic with stacktrace like the one below.

[  193.894380] BUG: kernel NULL pointer dereference, address: 00000000000000bc
[  193.895273] CPU: 13 PID: 18164 Comm: vh-net-17428 Kdump: loaded Tainted: G           O      5.15.123+ #26
[  193.903919] RIP: 0010:skb_segment+0xb0e/0x12f0
[  194.021892] Call Trace:
[  194.027422]  <TASK>
[  194.072861]  tcp_gso_segment+0x107/0x540
[  194.082031]  inet_gso_segment+0x15c/0x3d0
[  194.090783]  skb_mac_gso_segment+0x9f/0x110
[  194.095016]  __skb_gso_segment+0xc1/0x190
[  194.103131]  netem_enqueue+0x290/0xb10 [sch_netem]
[  194.107071]  dev_qdisc_enqueue+0x16/0x70
[  194.110884]  __dev_queue_xmit+0x63b/0xb30
[  194.121670]  bond_start_xmit+0x159/0x380 [bonding]
[  194.128506]  dev_hard_start_xmit+0xc3/0x1e0
[  194.131787]  __dev_queue_xmit+0x8a0/0xb30
[  194.138225]  macvlan_start_xmit+0x4f/0x100 [macvlan]
[  194.141477]  dev_hard_start_xmit+0xc3/0x1e0
[  194.144622]  sch_direct_xmit+0xe3/0x280
[  194.147748]  __dev_queue_xmit+0x54a/0xb30
[  194.154131]  tap_get_user+0x2a8/0x9c0 [tap]
[  194.157358]  tap_sendmsg+0x52/0x8e0 [tap]
[  194.167049]  handle_tx_zerocopy+0x14e/0x4c0 [vhost_net]
[  194.173631]  handle_tx+0xcd/0xe0 [vhost_net]
[  194.176959]  vhost_worker+0x76/0xb0 [vhost]
[  194.183667]  kthread+0x118/0x140
[  194.190358]  ret_from_fork+0x1f/0x30
[  194.193670]  </TASK>

In this case calling skb_orphan_frags() updated nr_frags leaving nrfrags
local variable in skb_segment() stale. This resulted in the code hitting
i >= nrfrags prematurely and trying to move to next frag_skb using
list_skb pointer, which was NULL, and caused kernel panic. Move the call
to zero copy functions before using frags and nr_frags.

Fixes: bf5c25d60861 ("skbuff: in skb_segment, call zerocopy functions once per nskb")
Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Reported-by: Amit Goyal <agoyal@purestorage.com>
Cc: stable@vger.kernel.org
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: xt_sctp: validate the flag_info count

commit e99476497687ef9e850748fe6d232264f30bc8f9 upstream.

sctp_mt_check doesn't validate the flag_count field. An attacker can
take advantage of that to trigger a OOB read and leak memory
information.

Add the field validation in the checkentry function.

Fixes: 2e4e6a17af35 ("[NETFILTER] x_tables: Abstraction layer for {ip,ip6,arp}_tables")
Cc: stable@vger.kernel.org
Reported-by: Lucas Leong <wmliang@infosec.exchange>
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: xt_u32: validate user space input

commit 69c5d284f67089b4750d28ff6ac6f52ec224b330 upstream.

The xt_u32 module doesn't validate the fields in the xt_u32 structure.
An attacker may take advantage of this to trigger an OOB read by setting
the size fields with a value beyond the arrays boundaries.

Add a checkentry function to validate the structure.

This was originally reported by the ZDI project (ZDI-CAN-18408).

Fixes: 1b50b8a371e9 ("[NETFILTER]: Add u32 match")
Cc: stable@vger.kernel.org
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nft_exthdr: Fix non-linear header modification

commit 28427f368f0e08d504ed06e74bc7cc79d6d06511 upstream.

Fix skb_ensure_writable() size. Don't use nft_tcp_header_pointer() to
make it explicit that pointers point to the packet (not local buffer).

Fixes: 99d1712bc41c ("netfilter: exthdr: tcp option set support")
Fixes: 7890cbea66e7 ("netfilter: exthdr: add support for tcp option removal")
Cc: stable@vger.kernel.org
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c

commit 050d91c03b28ca479df13dfb02bcd2c60dd6a878 upstream.

The missing IP_SET_HASH_WITH_NET0 macro in ip_set_hash_netportnet can
lead to the use of wrong `CIDR_POS(c)` for calculating array offsets,
which can lead to integer underflow. As a result, it leads to slab
out-of-bound access.
This patch adds back the IP_SET_HASH_WITH_NET0 macro to
ip_set_hash_netportnet to address the issue.

Fixes: 886503f34d63 ("netfilter: ipset: actually allow allowable CIDR 0 in hash:net,port,net")
Suggested-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Kyle Zeng <zengyhkyle@gmail.com>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU

commit c3b704d4a4a265660e665df51b129e8425216ed1 upstream.

This is a follow up of commit 915d975b2ffa ("net: deal with integer
overflows in kmalloc_reserve()") based on David Laight feedback.

Back in 2010, I failed to realize malicious users could set dev->mtu
to arbitrary values. This mtu has been since limited to 0x7fffffff but
regardless of how big dev->mtu is, it makes no sense for igmpv3_newpack()
to allocate more than IP_MAX_MTU and risk various skb fields overflows.

Fixes: 57e1ab6eaddc ("igmp: refine skb allocations")
Link: https://lore.kernel.org/netdev/d273628df80f45428e739274ab9ecb72@AcuMS.aculab.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: David Laight <David.Laight@ACULAB.COM>
Cc: Kyle Zeng <zengyhkyle@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virtio_ring: fix avail_wrap_counter in virtqueue_add_packed

[ Upstream commit 1acfe2c1225899eab5ab724c91b7e1eb2881b9ab ]

In current packed virtqueue implementation, the avail_wrap_counter won't
flip, in the case when the driver supplies a descriptor chain with a
length equals to the queue size; total_sg == vq->packed.vring.num.

Let’s assume the following situation:
vq->packed.vring.num=4
vq->packed.next_avail_idx: 1
vq->packed.avail_wrap_counter: 0

Then the driver adds a descriptor chain containing 4 descriptors.

We expect the following result with avail_wrap_counter flipped:
vq->packed.next_avail_idx: 1
vq->packed.avail_wrap_counter: 1

But, the current implementation gives the following result:
vq->packed.next_avail_idx: 1
vq->packed.avail_wrap_counter: 0

To reproduce the bug, you can set a packed queue size as small as
possible, so that the driver is more likely to provide a descriptor
chain with a length equal to the packed queue size. For example, in
qemu run following commands:
sudo qemu-system-x86_64 \
-enable-kvm \
-nographic \
-kernel "path/to/kernel_image" \
-m 1G \
-drive file="path/to/rootfs",if=none,id=disk \
-device virtio-blk,drive=disk \
-drive file="path/to/disk_image",if=none,id=rwdisk \
-device virtio-blk,drive=rwdisk,packed=on,queue-size=4,\
indirect_desc=off \
-append "console=ttyS0 root=/dev/vda rw init=/bin/bash"

Inside the VM, create a directory and mount the rwdisk device on it. The
rwdisk will hang and mount operation will not complete.

This commit fixes the wrap counter error by flipping the
packed.avail_wrap_counter, when start of descriptor chain equals to the
end of descriptor chain (head == i).

Fixes: 1ce9e6055fa0 ("virtio_ring: introduce packed ring support")
Signed-off-by: Yuan Yao <yuanyaogoog@chromium.org>
Message-Id: <20230808051110.3492693-1-yuanyaogoog@chromium.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: Fix the race condition while updating the transition_task of policy

[ Upstream commit 61bfbf7951ba561dcbdd5357702d3cbc2d447812 ]

The field 'transition_task' of policy structure is used to track the
task which is performing the frequency transition. Using this field to
print a warning once detect a case where the same task is calling
_begin() again before completing the preivous frequency transition via
the _end().

However, there is a potential race condition in _end() and _begin() APIs
while updating the field 'transition_task' of policy, the scenario is
depicted below:

             Task A                            Task B

        /* 1st freq transition */
        Invoke _begin() {
                ...
                ...
        }
                                        /* 2nd freq transition */
                                        Invoke _begin() {
                                                ... //waiting for A to
                                                ... //clear
                                                ... //transition_ongoing
                                                ... //in _end() for
                                                ... //the 1st transition
                                                        |
        Change the frequency                            |
                                                        |
        Invoke _end() {                                 |
                ...                                     |
                ...                                     |
                transition_ongoing = false;             V
                                                transition_ongoing = true;
                                                transition_task = current;
                transition_task = NULL;
                ... //A overwrites the task
                ... //performing the transition
                ... //result in error warning.
        }

To fix this race condition, the transition_lock of policy structure is
now acquired before updating policy structure in _end() API. Which ensure
that only one task can update the 'transition_task' field at a time.

Link: https://lore.kernel.org/all/b3c61d8a-d52d-3136-fbf0-d1de9f1ba411@huawei.com/
Fixes: ca654dc3a93d ("cpufreq: Catch double invocations of cpufreq_freq_transition_begin/end")
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Drivers: hv: vmbus: Don't dereference ACPI root object handle

[ Upstream commit 78e04bbff849b51b56f5925b1945db2c6e128b61 ]

Since the commit referenced in the Fixes: tag below the VMBus client driver
is walking the ACPI namespace up from the VMBus ACPI device to the ACPI
namespace root object trying to find Hyper-V MMIO ranges.

However, if it is not able to find them it ends trying to walk resources of
the ACPI namespace root object itself.
This object has all-ones handle, which causes a NULL pointer dereference
in the ACPI code (from dereferencing this pointer with an offset).

This in turn causes an oops on boot with VMBus host implementations that do
not provide Hyper-V MMIO ranges in their VMBus ACPI device or its
ancestors.
The QEMU VMBus implementation is an example of such implementation.

I guess providing these ranges is optional, since all tested Windows
versions seem to be able to use VMBus devices without them.

Fix this by explicitly terminating the lookup at the ACPI namespace root
object.

Note that Linux guests under KVM/QEMU do not use the Hyper-V PV interface
by default - they only do so if the KVM PV interface is missing or
disabled.

Example stack trace of such oops:
[ 3.710827] ? __die+0x1f/0x60
[ 3.715030] ? page_fault_oops+0x159/0x460
[ 3.716008] ? exc_page_fault+0x73/0x170
[ 3.716959] ? asm_exc_page_fault+0x22/0x30
[ 3.717957] ? acpi_ns_lookup+0x7a/0x4b0
[ 3.718898] ? acpi_ns_internalize_name+0x79/0xc0
[ 3.720018] acpi_ns_get_node_unlocked+0xb5/0xe0
[ 3.721120] ? acpi_ns_check_object_type+0xfe/0x200
[ 3.722285] ? acpi_rs_convert_aml_to_resource+0x37/0x6e0
[ 3.723559] ? down_timeout+0x3a/0x60
[ 3.724455] ? acpi_ns_get_node+0x3a/0x60
[ 3.725412] acpi_ns_get_node+0x3a/0x60
[ 3.726335] acpi_ns_evaluate+0x1c3/0x2c0
[ 3.727295] acpi_ut_evaluate_object+0x64/0x1b0
[ 3.728400] acpi_rs_get_method_data+0x2b/0x70
[ 3.729476] ? vmbus_platform_driver_probe+0x1d0/0x1d0 [hv_vmbus]
[ 3.730940] ? vmbus_platform_driver_probe+0x1d0/0x1d0 [hv_vmbus]
[ 3.732411] acpi_walk_resources+0x78/0xd0
[ 3.733398] vmbus_platform_driver_probe+0x9f/0x1d0 [hv_vmbus]
[ 3.734802] platform_probe+0x3d/0x90
[ 3.735684] really_probe+0x19b/0x400
[ 3.736570] ? __device_attach_driver+0x100/0x100
[ 3.737697] __driver_probe_device+0x78/0x160
[ 3.738746] driver_probe_device+0x1f/0x90
[ 3.739743] __driver_attach+0xc2/0x1b0
[ 3.740671] bus_for_each_dev+0x70/0xc0
[ 3.741601] bus_add_driver+0x10e/0x210
[ 3.742527] driver_register+0x55/0xf0
[ 3.744412] ? 0xffffffffc039a000
[ 3.745207] hv_acpi_init+0x3c/0x1000 [hv_vmbus]

Fixes: 7f163a6fd957 ("drivers:hv: Modify hv_vmbus to search for all MMIO ranges available.")
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/fd8e64ceeecfd1d95ff49021080cf699e88dbbde.1691606267.git.maciej.szmigiero@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: ste_dma40: Add missing IRQ check in d40_probe

[ Upstream commit c05ce6907b3d6e148b70f0bb5eafd61dcef1ddc1 ]

Check for the return value of platform_get_irq(): if no interrupt
is specified, it wouldn't make sense to call request_irq().

Fixes: 8d318a50b3d7 ("DMAENGINE: Support for ST-Ericssons DMA40 block v3")
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230724144108.2582917-1-ruanjinjie@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

um: Fix hostaudio build errors

[ Upstream commit db4bfcba7bb8d10f00bba2a3da6b9a9c2a1d7b71 ]

Use "select" to ensure that the required kconfig symbols are set
as expected.
Drop HOSTAUDIO since it is now equivalent to UML_SOUND.

Set CONFIG_SOUND=m in ARCH=um defconfig files to maintain the
status quo of the default configs.

Allow SOUND with UML regardless of HAS_IOMEM. Otherwise there is a
kconfig warning for unmet dependencies. (This was not an issue when
SOUND was defined in arch/um/drivers/Kconfig. I have done 50 randconfig
builds and didn't find any issues.)

This fixes build errors when CONFIG_SOUND is not set:

ld: arch/um/drivers/hostaudio_kern.o: in function `hostaudio_cleanup_module':
hostaudio_kern.c:(.exit.text+0xa): undefined reference to `unregister_sound_mixer'
ld: hostaudio_kern.c:(.exit.text+0x15): undefined reference to `unregister_sound_dsp'
ld: arch/um/drivers/hostaudio_kern.o: in function `hostaudio_init_module':
hostaudio_kern.c:(.init.text+0x19): undefined reference to `register_sound_dsp'
ld: hostaudio_kern.c:(.init.text+0x31): undefined reference to `register_sound_mixer'
ld: hostaudio_kern.c:(.init.text+0x49): undefined reference to `unregister_sound_dsp'

and this kconfig warning:
WARNING: unmet direct dependencies detected for SOUND

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Fixes: d886e87cb82b ("sound: make OSS sound core optional")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: lore.kernel.org/r/202307141416.vxuRVpFv-lkp@intel.com
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-um@lists.infradead.org
Cc: Tejun Heo <tj@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: linux-kbuild@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: fsmc: handle clk prepare error in fsmc_nand_resume()

[ Upstream commit a5a88125d00612586e941ae13e7fcf36ba8f18a7 ]

In fsmc_nand_resume(), the return value of clk_prepare_enable() should be
checked since it might fail.

Fixes: e25da1c07dfb ("mtd: fsmc_nand: Add clk_{un}prepare() support")
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230817115839.10192-1-yiyang13@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: spi-nor: Check bus width while setting QE bit

[ Upstream commit f01d8155a92e33cdaa85d20bfbe6c441907b3c1f ]

spi_nor_write_16bit_sr_and_check() should also check if bus width is
4 before setting QE bit.

Fixes: 39d1e3340c73 ("mtd: spi-nor: Fix clearing of QE bit on lock()/unlock()")
Suggested-by: Michael Walle <michael@walle.cc>
Suggested-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20230818064524.1229100-2-hsinyi@chromium.org
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

leds: trigger: tty: Do not use LED_ON/OFF constants, use led_blink_set_oneshot instead

[ Upstream commit 730094577e0c37e1bc40be37cbd41f71b0a8a2a4 ]

The tty LED trigger uses the obsolete LED_ON & LED_OFF constants when
setting LED brightness. This is bad because the LED_ON constant is equal
to 1, and so when activating the tty LED trigger on a LED class device
with max_brightness greater than 1, the LED is dimmer than it can be
(when max_brightness is 255, the LED is very dimm indeed; some devices
translate 1/255 to 0, so the LED is OFF all the time).

Instead of directly setting brightness to a specific value, use the
led_blink_set_oneshot() function from LED core to configure the blink.
This function takes the current configured brightness as blink
brightness if not zero, and max brightness otherwise.

This also changes the behavior of the TTY LED trigger. Previously if
rx/tx stats kept changing, the LED was ON all the time they kept
changing. With this patch the LED will blink on TTY activity.

Fixes: fd4a641ac88f ("leds: trigger: implement a tty trigger")
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20230802090753.13611-1-kabel@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

leds: Fix BUG_ON check for LED_COLOR_ID_MULTI that is always false

[ Upstream commit c3f853184bed04105682383c2971798c572226b5 ]

At the time we call
    BUG_ON(props.color == LED_COLOR_ID_MULTI);
the props variable is still initialized to zero.

Call the BUG_ON only after we parse fwnode into props.

Fixes: 77dce3a22e89 ("leds: disallow /sys/class/leds/*:multi:* for now")
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20230801151623.30387-1-kabel@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

leds: multicolor: Use rounded division when calculating color components

[ Upstream commit 065d099f1be58187e6629273c50b948a02b7e1bf ]

Given channel intensity, LED brightness and max LED brightness, the
multicolor LED framework helper led_mc_calc_color_components() computes
the color channel brightness as

    chan_brightness = brightness * chan_intensity / max_brightness

Consider the situation when (brightness, intensity, max_brightness) is
for example (16, 15, 255), then chan_brightness is computed to 0
although the fractional divison would give 0.94, which should be rounded
to 1.

Use DIV_ROUND_CLOSEST here for the division to give more realistic
component computation:

    chan_brightness = DIV_ROUND_CLOSEST(brightness * chan_intensity,
                                        max_brightness)

Fixes: 55d5d3b46b08 ("leds: multicolor: Introduce a multicolor class definition")
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20230801124931.8661-1-kabel@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

leds: pwm: Fix error code in led_pwm_create_fwnode()

[ Upstream commit cadb2de2a7fd9e955381307de3eddfcc386c208e ]

Negative -EINVAL was intended, not positive EINVAL.  Fix it.

Fixes: 95138e01275e ("leds: pwm: Make error handling more robust")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/a33b981a-b2c4-4dc2-b00a-626a090d2f11@moroto.mountain
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rpmsg: glink: Add check for kstrdup

[ Upstream commit b5c9ee8296a3760760c7b5d2e305f91412adc795 ]

Add check for the return value of kstrdup() and return the error
if it fails in order to avoid NULL pointer dereference.

Fixes: b4f8e52b89f6 ("rpmsg: Introduce Qualcomm RPM glink driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20230619030631.12361-1-jiasheng@iscas.ac.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy/rockchip: inno-hdmi: do not power on rk3328 post pll on reg write

[ Upstream commit 19a1d46bd699940a496d3b0d4e142ef99834988c ]

inno_write is used to configure 0xaa reg, that also hold the
POST_PLL_POWER_DOWN bit.
When POST_PLL_REFCLK_SEL_TMDS is configured the power down bit is not
taken into consideration.

Fix this by keeping the power down bit until configuration is complete.
Also reorder the reg write order for consistency.

Fixes: 53706a116863 ("phy: add Rockchip Innosilicon hdmi phy")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20230615171005.2251032-5-jonas@kwiboo.se
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy/rockchip: inno-hdmi: round fractal pixclock in rk3328 recalc_rate

[ Upstream commit d5ef343c1d62bc4c4c2c393af654a41cb34b449f ]

inno_hdmi_phy_rk3328_clk_recalc_rate() is returning a rate not found
in the pre pll config table when the fractal divider is used.
This can prevent proper power_on because a tmdsclock for the new rate
is not found in the pre pll config table.

Fix this by saving and returning a rounded pixel rate that exist
in the pre pll config table.

Fixes: 53706a116863 ("phy: add Rockchip Innosilicon hdmi phy")
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20230615171005.2251032-3-jonas@kwiboo.se
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy/rockchip: inno-hdmi: use correct vco_div_5 macro on rk3328

[ Upstream commit 644c06dfbd0da713f772abf0a8f8581ac78e6264 ]

inno_hdmi_phy_rk3328_clk_set_rate() is using the RK3228 macro
when configuring vco_div_5 on RK3328.

Fix this by using correct vco_div_5 macro for RK3328.

Fixes: 53706a116863 ("phy: add Rockchip Innosilicon hdmi phy")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20230615171005.2251032-2-jonas@kwiboo.se
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: idxd: Modify the dependence of attribute pasid_enabled

[ Upstream commit 50c5e6f41d5ad7c731c31135a30d0e4f0e4fea26 ]

Kernel PASID and user PASID are separately enabled. User needs to know the
user PASID enabling status to decide how to use IDXD device in user space.
This is done via the attribute /sys/bus/dsa/devices/dsa0/pasid_enabled.
It's unnecessary for user to know the kernel PASID enabling status because
user won't use the kernel PASID. But instead of showing the user PASID
enabling status, the attribute shows the kernel PASID enabling status. Fix
the issue by showing the user PASID enabling status in the attribute.

Fixes: 42a1b73852c4 ("dmaengine: idxd: Separate user and kernel pasid enabling")
Signed-off-by: Rex Zhang <rex.zhang@intel.com>
Acked-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230614062706.1743078-1-rex.zhang@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: brcmnand: Fix mtd oobsize

[ Upstream commit 60177390fa061c62d156f4a546e3efd90df3c183 ]

brcmnand controller can only access the flash spare area up to certain
bytes based on the ECC level. It can be less than the actual flash spare
area size. For example, for many NAND chip supporting ECC BCH-8, it has
226 bytes spare area. But controller can only uses 218 bytes. So brcmand
driver overrides the mtd oobsize with the controller's accessible spare
area size. When the nand base driver utilizes the nand_device object, it
resets the oobsize back to the actual flash spare aprea size from
nand_memory_organization structure and controller may not able to access
all the oob area as mtd advises.

This change fixes the issue by overriding the oobsize in the
nand_memory_organization structure to the controller's accessible spare
area size.

Fixes: a7ab085d7c16 ("mtd: rawnand: Initialize the nand_device object")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230706182909.79151-6-william.zhang@broadcom.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing: Fix race issue between cpu buffer write and swap

[ Upstream commit 3163f635b20e9e1fb4659e74f47918c9dddfe64e ]

Warning happened in rb_end_commit() at code:
if (RB_WARN_ON(cpu_buffer, !local_read(&cpu_buffer->committing)))

  WARNING: CPU: 0 PID: 139 at kernel/trace/ring_buffer.c:3142
rb_commit+0x402/0x4a0
  Call Trace:
   ring_buffer_unlock_commit+0x42/0x250
   trace_buffer_unlock_commit_regs+0x3b/0x250
   trace_event_buffer_commit+0xe5/0x440
   trace_event_buffer_reserve+0x11c/0x150
   trace_event_raw_event_sched_switch+0x23c/0x2c0
   __traceiter_sched_switch+0x59/0x80
   __schedule+0x72b/0x1580
   schedule+0x92/0x120
   worker_thread+0xa0/0x6f0

It is because the race between writing event into cpu buffer and swapping
cpu buffer through file per_cpu/cpu0/snapshot:

  Write on CPU 0             Swap buffer by per_cpu/cpu0/snapshot on CPU 1
  --------                   --------
                             tracing_snapshot_write()
                               [...]

  ring_buffer_lock_reserve()
    cpu_buffer = buffer->buffers[cpu]; // 1. Suppose find 'cpu_buffer_a';
    [...]
    rb_reserve_next_event()
      [...]

                               ring_buffer_swap_cpu()
                                 if (local_read(&cpu_buffer_a->committing))
                                     goto out_dec;
                                 if (local_read(&cpu_buffer_b->committing))
                                     goto out_dec;
                                 buffer_a->buffers[cpu] = cpu_buffer_b;
                                 buffer_b->buffers[cpu] = cpu_buffer_a;
                                 // 2. cpu_buffer has swapped here.

      rb_start_commit(cpu_buffer);
      if (unlikely(READ_ONCE(cpu_buffer->buffer)
          != buffer)) { // 3. This check passed due to 'cpu_buffer->buffer'
        [...]           //    has not changed here.
        return NULL;
      }
                                 cpu_buffer_b->buffer = buffer_a;
                                 cpu_buffer_a->buffer = buffer_b;
                                 [...]

      // 4. Reserve event from 'cpu_buffer_a'.

  ring_buffer_unlock_commit()
    [...]
    cpu_buffer = buffer->buffers[cpu]; // 5. Now find 'cpu_buffer_b' !!!
    rb_commit(cpu_buffer)
      rb_end_commit()  // 6. WARN for the wrong 'committing' state !!!

Based on above analysis, we can easily reproduce by following testcase:
  ``` bash
  #!/bin/bash

  dmesg -n 7
  sysctl -w kernel.panic_on_warn=1
  TR=/sys/kernel/tracing
  echo 7 > ${TR}/buffer_size_kb
  echo "sched:sched_switch" > ${TR}/set_event
  while [ true ]; do
          echo 1 > ${TR}/per_cpu/cpu0/snapshot
  done &
  while [ true ]; do
          echo 1 > ${TR}/per_cpu/cpu0/snapshot
  done &
  while [ true ]; do
          echo 1 > ${TR}/per_cpu/cpu0/snapshot
  done &
  ```

To fix it, IIUC, we can use smp_call_function_single() to do the swap on
the target cpu where the buffer is located, so that above race would be
avoided.

Link: https://lore.kernel.org/linux-trace-kernel/20230831132739.4070878-1-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Fixes: f1affcaaa861 ("tracing: Add snapshot in the per_cpu trace directories")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing: Remove extra space at the end of hwlat_detector/mode

[ Upstream commit 2cf0dee989a8b2501929eaab29473b6b1fa11057 ]

Space is printed after each mode value including the last one:
$ echo \"$(sudo cat /sys/kernel/tracing/hwlat_detector/mode)\"
"none [round-robin] per-cpu "

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Link: https://lore.kernel.org/linux-trace-kernel/20230825103432.7750-1-m.kobuk@ispras.ru
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 8fa826b7344d ("trace/hwlat: Implement the mode config option")
Signed-off-by: Mikhail Kobuk <m.kobuk@ispras.ru>
Reviewed-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/speculation: Mark all Skylake CPUs as vulnerable to GDS

[ Upstream commit c9f4c45c8ec3f07f4f083f9750032a1ec3eab6b2 ]

The Gather Data Sampling (GDS) vulnerability is common to all Skylake
processors.  However, the "client" Skylakes* are now in this list:

https://www.intel.com/content/www/us/en/support/articles/000022396/processors.html

which means they are no longer included for new vulnerabilities here:

https://www.intel.com/content/www/us/en/developer/topic-technology/software-security-guidance/processors-affected-consolidated-product-cpu-model.html

or in other GDS documentation.  Thus, they were not included in the
original GDS mitigation patches.

Mark SKYLAKE and SKYLAKE_L as vulnerable to GDS to match all the
other Skylake CPUs (which include Kaby Lake).  Also group the CPUs
so that the ones that share the exact same vulnerabilities are next
to each other.

Last, move SRBDS to the end of each line.  This makes it clear at a
glance that SKYLAKE_X is unique.  Of the five Skylakes, it is the
only "server" CPU and has a different implementation from the
clients of the "special register" hardware, making it immune to SRBDS.

This makes the diff much harder to read, but the resulting table is
worth it.

I very much appreciate the report from Michael Zhivich about this
issue.  Despite what level of support a hardware vendor is providing,
the kernel very much needs an accurate and up-to-date list of
vulnerable CPUs.  More reports like this are very welcome.

* Client Skylakes are CPUID 406E3/506E3 which is family 6, models
  0x4E and 0x5E, aka INTEL_FAM6_SKYLAKE and INTEL_FAM6_SKYLAKE_L.

Reported-by: Michael Zhivich <mzhivich@akamai.com>
Fixes: 8974eb588283 ("x86/speculation: Add Gather Data Sampling mitigation")
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tick/rcu: Fix false positive "softirq work is pending" messages

[ Upstream commit 96c1fa04f089a7e977a44e4e8fdc92e81be20bef ]

In commit 0345691b24c0 ("tick/rcu: Stop allowing RCU_SOFTIRQ in idle") the
new function report_idle_softirq() was created by breaking code out of the
existing can_stop_idle_tick() for kernels v5.18 and newer.

In doing so, the code essentially went from a one conditional:

if (a && b && c)
warn();

to a three conditional:

if (!a)
return;
if (!b)
return;
if (!c)
return;
warn();

But that conversion got the condition for the RT specific
local_bh_blocked() wrong. The original condition was:

    !local_bh_blocked()

but the conversion failed to negate it so it ended up as:

        if (!local_bh_blocked())
return false;

This issue lay dormant until another fixup for the same commit was added
in commit a7e282c77785 ("tick/rcu: Fix bogus ratelimit condition").
This commit realized the ratelimit was essentially set to zero instead
of ten, and hence *no* softirq pending messages would ever be issued.

Once this commit was backported via linux-stable, both the v6.1 and v6.4
preempt-rt kernels started printing out 10 instances of this at boot:

  NOHZ tick-stop error: local softirq work is pending, handler #80!!!

Remove the negation and return when local_bh_blocked() evaluates to true to
bring the correct behaviour back.

Fixes: 0345691b24c0 ("tick/rcu: Stop allowing RCU_SOFTIRQ in idle")
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Wen Yang <wenyang.linux@foxmail.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230818200757.1808398-1-paul.gortmaker@windriver.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86/amd/pmf: Fix a missing cleanup path

[ Upstream commit 4dbd6e61adc7e52dd1c9165f0ccaa90806611e40 ]

On systems that support slider notifications but don't otherwise support
granular slider the SPS cleanup path doesn't run.

This means that loading/unloading/loading leads to failures because
the sysfs files don't get setup properly when reloaded.

Add the missing cleanup path.

Fixes: 33c9ab5b493a ("platform/x86/amd/pmf: Notify OS power slider update")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230823185421.23959-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>