felix [Mon, 23 Oct 2023 01:40:19 +0000 (09:40 +0800)]
SUNRPC: Fix RPC client cleaned up the freed pipefs dentries
[ Upstream commit
bfca5fb4e97c46503ddfc582335917b0cc228264 ]
RPC client pipefs dentries cleanup is in separated rpc_remove_pipedir()
workqueue,which takes care about pipefs superblock locking.
In some special scenarios, when kernel frees the pipefs sb of the
current client and immediately alloctes a new pipefs sb,
rpc_remove_pipedir function would misjudge the existence of pipefs
sb which is not the one it used to hold. As a result,
the rpc_remove_pipedir would clean the released freed pipefs dentries.
To fix this issue, rpc_remove_pipedir should check whether the
current pipefs sb is consistent with the original pipefs sb.
This error can be catched by KASAN:
=========================================================
[ 250.497700] BUG: KASAN: slab-use-after-free in dget_parent+0x195/0x200
[ 250.498315] Read of size 4 at addr
ffff88800a2ab804 by task kworker/0:18/106503
[ 250.500549] Workqueue: events rpc_free_client_work
[ 250.501001] Call Trace:
[ 250.502880] kasan_report+0xb6/0xf0
[ 250.503209] ? dget_parent+0x195/0x200
[ 250.503561] dget_parent+0x195/0x200
[ 250.503897] ? __pfx_rpc_clntdir_depopulate+0x10/0x10
[ 250.504384] rpc_rmdir_depopulate+0x1b/0x90
[ 250.504781] rpc_remove_client_dir+0xf5/0x150
[ 250.505195] rpc_free_client_work+0xe4/0x230
[ 250.505598] process_one_work+0x8ee/0x13b0
...
[ 22.039056] Allocated by task 244:
[ 22.039390] kasan_save_stack+0x22/0x50
[ 22.039758] kasan_set_track+0x25/0x30
[ 22.040109] __kasan_slab_alloc+0x59/0x70
[ 22.040487] kmem_cache_alloc_lru+0xf0/0x240
[ 22.040889] __d_alloc+0x31/0x8e0
[ 22.041207] d_alloc+0x44/0x1f0
[ 22.041514] __rpc_lookup_create_exclusive+0x11c/0x140
[ 22.041987] rpc_mkdir_populate.constprop.0+0x5f/0x110
[ 22.042459] rpc_create_client_dir+0x34/0x150
[ 22.042874] rpc_setup_pipedir_sb+0x102/0x1c0
[ 22.043284] rpc_client_register+0x136/0x4e0
[ 22.043689] rpc_new_client+0x911/0x1020
[ 22.044057] rpc_create_xprt+0xcb/0x370
[ 22.044417] rpc_create+0x36b/0x6c0
...
[ 22.049524] Freed by task 0:
[ 22.049803] kasan_save_stack+0x22/0x50
[ 22.050165] kasan_set_track+0x25/0x30
[ 22.050520] kasan_save_free_info+0x2b/0x50
[ 22.050921] __kasan_slab_free+0x10e/0x1a0
[ 22.051306] kmem_cache_free+0xa5/0x390
[ 22.051667] rcu_core+0x62c/0x1930
[ 22.051995] __do_softirq+0x165/0x52a
[ 22.052347]
[ 22.052503] Last potentially related work creation:
[ 22.052952] kasan_save_stack+0x22/0x50
[ 22.053313] __kasan_record_aux_stack+0x8e/0xa0
[ 22.053739] __call_rcu_common.constprop.0+0x6b/0x8b0
[ 22.054209] dentry_free+0xb2/0x140
[ 22.054540] __dentry_kill+0x3be/0x540
[ 22.054900] shrink_dentry_list+0x199/0x510
[ 22.055293] shrink_dcache_parent+0x190/0x240
[ 22.055703] do_one_tree+0x11/0x40
[ 22.056028] shrink_dcache_for_umount+0x61/0x140
[ 22.056461] generic_shutdown_super+0x70/0x590
[ 22.056879] kill_anon_super+0x3a/0x60
[ 22.057234] rpc_kill_sb+0x121/0x200
Fixes:
0157d021d23a ("SUNRPC: handle RPC client pipefs dentries by network namespace aware routines")
Signed-off-by: felix <fuzhen5@huawei.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Olga Kornievskaia [Fri, 13 Oct 2023 15:04:10 +0000 (11:04 -0400)]
NFSv4.1: fix SP4_MACH_CRED protection for pnfs IO
[ Upstream commit
5cc7688bae7f0757c39c1d3dfdd827b724061067 ]
If the client is doing pnfs IO and Kerberos is configured and EXCHANGEID
successfully negotiated SP4_MACH_CRED and WRITE/COMMIT are on the
list of state protected operations, then we need to make sure to
choose the DS's rpc_client structure instead of the MDS's one.
Fixes:
fb91fb0ee7b2 ("NFS: Move call to nfs4_state_protect_write() to nfs4_write_setup()")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Wed, 11 Oct 2023 08:00:22 +0000 (11:00 +0300)]
SUNRPC: Add an IS_ERR() check back to where it was
[ Upstream commit
4f3ed837186fc0d2722ba8d2457a594322e9c2ef ]
This IS_ERR() check was deleted during in a cleanup because, at the time,
the rpcb_call_async() function could not return an error pointer. That
changed in commit
25cf32ad5dba ("SUNRPC: Handle allocation failure in
rpc_new_task()") and now it can return an error pointer. Put the check
back.
A related revert was done in commit
13bd90141804 ("Revert "SUNRPC:
Remove unreachable error condition"").
Fixes:
037e910b52b0 ("SUNRPC: Remove unreachable error condition in rpcb_getport_async()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Olga Kornievskaia [Fri, 15 Sep 2023 19:21:16 +0000 (15:21 -0400)]
NFSv4.1: fix handling NFS4ERR_DELAY when testing for session trunking
[ Upstream commit
6bd1a77dc72dea0b0d8b6014f231143984d18f6d ]
Currently when client sends an EXCHANGE_ID for a possible trunked
connection, for any error that happened, the trunk will be thrown
out. However, an NFS4ERR_DELAY is a transient error that should be
retried instead.
Fixes:
e818bd085baf ("NFSv4.1 remove xprt from xprt_switch if session trunking test fails")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yi Yang [Thu, 19 Oct 2023 06:55:48 +0000 (06:55 +0000)]
mtd: rawnand: meson: check return value of devm_kasprintf()
[ Upstream commit
5a985960a4dd041c21dbe9956958c1633d2da706 ]
devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful by
checking the pointer validity.
Fixes:
1e4d3ba66888 ("mtd: rawnand: meson: fix the clock")
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20231019065548.318443-1-yiyang13@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yi Yang [Thu, 19 Oct 2023 06:55:37 +0000 (06:55 +0000)]
mtd: rawnand: intel: check return value of devm_kasprintf()
[ Upstream commit
74ac5b5e2375f1e8ef797ac7770887e9969f2516 ]
devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful by
checking the pointer validity.
Fixes:
0b1039f016e8 ("mtd: rawnand: Add NAND controller support on Intel LGM SoC")
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20231019065537.318391-1-yiyang13@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Trond Myklebust [Sun, 17 Sep 2023 13:06:05 +0000 (09:06 -0400)]
SUNRPC: ECONNRESET might require a rebind
[ Upstream commit
4b09ca1508a60be30b2e3940264e93d7aeb5c97e ]
If connect() is returning ECONNRESET, it usually means that nothing is
listening on that port. If so, a rebind might be required in order to
obtain the new port on which the RPC service is listening.
Fixes:
fd01b2597941 ("SUNRPC: ECONNREFUSED should cause a rebind.")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Finn Thain [Fri, 15 Sep 2023 05:47:11 +0000 (15:47 +1000)]
sched/core: Optimize in_task() and in_interrupt() a bit
[ Upstream commit
87c3a5893e865739ce78aa7192d36011022e0af7 ]
Except on x86, preempt_count is always accessed with READ_ONCE().
Repeated invocations in macros like irq_count() produce repeated loads.
These redundant instructions appear in various fast paths. In the one
shown below, for example, irq_count() is evaluated during kernel entry
if !tick_nohz_full_cpu(smp_processor_id()).
0001ed0a <irq_enter_rcu>:
1ed0a: 4e56 0000 linkw %fp,#0
1ed0e: 200f movel %sp,%d0
1ed10: 0280 ffff e000 andil #-8192,%d0
1ed16: 2040 moveal %d0,%a0
1ed18: 2028 0008 movel %a0@(8),%d0
1ed1c: 0680 0001 0000 addil #65536,%d0
1ed22: 2140 0008 movel %d0,%a0@(8)
1ed26: 082a 0001 000f btst #1,%a2@(15)
1ed2c: 670c beqs 1ed3a <irq_enter_rcu+0x30>
1ed2e: 2028 0008 movel %a0@(8),%d0
1ed32: 2028 0008 movel %a0@(8),%d0
1ed36: 2028 0008 movel %a0@(8),%d0
1ed3a: 4e5e unlk %fp
1ed3c: 4e75 rts
This patch doesn't prevent the pointless btst and beqs instructions
above, but it does eliminate 2 of the 3 pointless move instructions
here and elsewhere.
On x86, preempt_count is per-cpu data and the problem does not arise
presumably because the compiler is free to optimize more effectively.
This patch was tested on m68k and x86. I was expecting no changes
to object code for x86 and mostly that's what I saw. However, there
were a few places where code generation was perturbed for some reason.
The performance issue addressed here is minor on uniprocessor m68k. I
got a 0.01% improvement from this patch for a simple "find /sys -false"
benchmark. For architectures and workloads susceptible to cache line bounce
the improvement is expected to be larger. The only SMP architecture I have
is x86, and as x86 unaffected I have not done any further measurements.
Fixes:
15115830c887 ("preempt: Cleanup the macro maze a bit")
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/0a403120a682a525e6db2d81d1a3ffcc137c3742.1694756831.git.fthain@linux-m68k.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miri Korenblit [Wed, 13 Sep 2023 11:56:45 +0000 (14:56 +0300)]
wifi: iwlwifi: Use FW rate for non-data frames
[ Upstream commit
499d02790495958506a64f37ceda7e97345a50a8 ]
Currently we are setting the rate in the tx cmd for
mgmt frames (e.g. during connection establishment).
This was problematic when sending mgmt frames in eSR mode,
as we don't know what link this frame will be sent on
(This is decided by the FW), so we don't know what is the
lowest rate.
Fix this by not setting the rate in tx cmd and rely
on FW to choose the right one.
Set rate only for injected frames with fixed rate,
or when no sta is given.
Also set for important frames (EAPOL etc.) the High Priority flag.
Fixes:
055b22e770dd ("iwlwifi: mvm: Set Tx rate and flags when there is not station")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230913145231.6c7e59620ee0.I6eaed3ccdd6dd62b9e664facc484081fc5275843@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yi Yang [Mon, 21 Aug 2023 08:40:46 +0000 (16:40 +0800)]
mtd: rawnand: tegra: add missing check for platform_get_irq()
[ Upstream commit
0a1166c27d4e53186e6bf9147ea6db9cd1d65847 ]
Add the missing check for platform_get_irq() and return error code
if it fails.
Fixes:
d7d9f8ec77fe ("mtd: rawnand: add NVIDIA Tegra NAND Flash controller driver")
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230821084046.217025-1-yiyang13@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Wed, 25 Oct 2023 11:58:18 +0000 (14:58 +0300)]
pwm: Fix double shift bug
[ Upstream commit
d27abbfd4888d79dd24baf50e774631046ac4732 ]
These enums are passed to set/test_bit(). The set/test_bit() functions
take a bit number instead of a shifted value. Passing a shifted value
is a double shift bug like doing BIT(BIT(1)). The double shift bug
doesn't cause a problem here because we are only checking 0 and 1 but
if the value was 5 or above then it can lead to a buffer overflow.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vitaly Prosyak [Wed, 11 Oct 2023 23:31:48 +0000 (19:31 -0400)]
drm/amdgpu: fix software pci_unplug on some chips
[ Upstream commit
4638e0c29a3f2294d5de0d052a4b8c9f33ccb957 ]
When software 'pci unplug' using IGT is executed we got a sysfs directory
entry is NULL for differant ras blocks like hdp, umc, etc.
Before call 'sysfs_remove_file_from_group' and 'sysfs_remove_group'
check that 'sd' is not NULL.
[ +0.000001] RIP: 0010:sysfs_remove_group+0x83/0x90
[ +0.000002] Code: 31 c0 31 d2 31 f6 31 ff e9 9a a8 b4 00 4c 89 e7 e8 f2 a2 ff ff eb c2 49 8b 55 00 48 8b 33 48 c7 c7 80 65 94 82 e8 cd 82 bb ff <0f> 0b eb cc 66 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90
[ +0.000001] RSP: 0018:
ffffc90002067c90 EFLAGS:
00010246
[ +0.000002] RAX:
0000000000000000 RBX:
ffffffff824ea180 RCX:
0000000000000000
[ +0.000001] RDX:
0000000000000000 RSI:
0000000000000000 RDI:
0000000000000000
[ +0.000001] RBP:
ffffc90002067ca8 R08:
0000000000000000 R09:
0000000000000000
[ +0.000001] R10:
0000000000000000 R11:
0000000000000000 R12:
0000000000000000
[ +0.000001] R13:
ffff88810a395f48 R14:
ffff888101aab0d0 R15:
0000000000000000
[ +0.000001] FS:
00007f5ddaa43a00(0000) GS:
ffff88841e800000(0000) knlGS:
0000000000000000
[ +0.000002] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ +0.000001] CR2:
00007f8ffa61ba50 CR3:
0000000106432000 CR4:
0000000000350ef0
[ +0.000001] Call Trace:
[ +0.000001] <TASK>
[ +0.000001] ? show_regs+0x72/0x90
[ +0.000002] ? sysfs_remove_group+0x83/0x90
[ +0.000002] ? __warn+0x8d/0x160
[ +0.000001] ? sysfs_remove_group+0x83/0x90
[ +0.000001] ? report_bug+0x1bb/0x1d0
[ +0.000003] ? handle_bug+0x46/0x90
[ +0.000001] ? exc_invalid_op+0x19/0x80
[ +0.000002] ? asm_exc_invalid_op+0x1b/0x20
[ +0.000003] ? sysfs_remove_group+0x83/0x90
[ +0.000001] dpm_sysfs_remove+0x61/0x70
[ +0.000002] device_del+0xa3/0x3d0
[ +0.000002] ? ktime_get_mono_fast_ns+0x46/0xb0
[ +0.000002] device_unregister+0x18/0x70
[ +0.000001] i2c_del_adapter+0x26d/0x330
[ +0.000002] arcturus_i2c_control_fini+0x25/0x50 [amdgpu]
[ +0.000236] smu_sw_fini+0x38/0x260 [amdgpu]
[ +0.000241] amdgpu_device_fini_sw+0x116/0x670 [amdgpu]
[ +0.000186] ? mutex_lock+0x13/0x50
[ +0.000003] amdgpu_driver_release_kms+0x16/0x40 [amdgpu]
[ +0.000192] drm_minor_release+0x4f/0x80 [drm]
[ +0.000025] drm_release+0xfe/0x150 [drm]
[ +0.000027] __fput+0x9f/0x290
[ +0.000002] ____fput+0xe/0x20
[ +0.000002] task_work_run+0x61/0xa0
[ +0.000002] exit_to_user_mode_prepare+0x150/0x170
[ +0.000002] syscall_exit_to_user_mode+0x2a/0x50
Cc: Hawking Zhang <hawking.zhang@amd.com>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alex Spataru [Sat, 4 Nov 2023 21:01:52 +0000 (16:01 -0500)]
ALSA: hda/realtek: Add quirk for ASUS UX7602ZM
[ Upstream commit
26fd31ef9c02a5e91cdb8eea127b056bd7cf0b3b ]
Enables the SPI-connected CSC35L41 audio amplifier for this
laptop model.
As of BIOS version 303 it's still necessary to
modify the ACPI table to add the related _DSD properties:
https://github.com/alex-spataru/asus_zenbook_ux7602zm_sound/
Signed-off-by: Alex Spataru <alex_spataru@outlook.com>
Link: https://lore.kernel.org/r/DS7PR07MB7621BB5BB14F5473D181624CE3A4A@DS7PR07MB7621.namprd07.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zongmin Zhou [Tue, 1 Aug 2023 02:53:09 +0000 (10:53 +0800)]
drm/qxl: prevent memory leak
[ Upstream commit
0e8b9f258baed25f1c5672613699247c76b007b5 ]
The allocated memory for qdev->dumb_heads should be released
in qxl_destroy_monitors_object before qxl suspend.
otherwise,qxl_create_monitors_object will be called to
reallocate memory for qdev->dumb_heads after qxl resume,
it will cause memory leak.
Signed-off-by: Zongmin Zhou <zhouzongmin@kylinos.cn>
Link: https://lore.kernel.org/r/20230801025309.4049813-1-zhouzongmin@kylinos.cn
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tony Lindgren [Mon, 30 Oct 2023 05:23:38 +0000 (07:23 +0200)]
ASoC: ti: omap-mcbsp: Fix runtime PM underflow warnings
[ Upstream commit
fbb74e56378d8306f214658e3d525a8b3f000c5a ]
We need to check for an active device as otherwise we get warnings
for some mcbsp instances for "Runtime PM usage count underflow!".
Reported-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20231030052340.13415-1-tony@atomide.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Philipp Stanner [Thu, 2 Nov 2023 19:26:13 +0000 (20:26 +0100)]
i2c: dev: copy userspace array safely
[ Upstream commit
cc9c54232f04aef3a5d7f64a0ece7df00f1aaa3d ]
i2c-dev.c utilizes memdup_user() to copy a userspace array. This is done
without an overflow check.
Use the new wrapper memdup_array_user() to copy the array more safely.
Suggested-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Douglas Anderson [Tue, 22 Aug 2023 20:19:46 +0000 (13:19 -0700)]
kgdb: Flush console before entering kgdb on panic
[ Upstream commit
dd712d3d45807db9fcae28a522deee85c1f2fde6 ]
When entering kdb/kgdb on a kernel panic, it was be observed that the
console isn't flushed before the `kdb` prompt came up. Specifically,
when using the buddy lockup detector on arm64 and running:
echo HARDLOCKUP > /sys/kernel/debug/provoke-crash/DIRECT
I could see:
[ 26.161099] lkdtm: Performing direct entry HARDLOCKUP
[ 32.499881] watchdog: Watchdog detected hard LOCKUP on cpu 6
[ 32.552865] Sending NMI from CPU 5 to CPUs 6:
[ 32.557359] NMI backtrace for cpu 6
... [backtrace for cpu 6] ...
[ 32.558353] NMI backtrace for cpu 5
... [backtrace for cpu 5] ...
[ 32.867471] Sending NMI from CPU 5 to CPUs 0-4,7:
[ 32.872321] NMI backtrace forP cpuANC: Hard LOCKUP
Entering kdb (current=..., pid 0) on processor 5 due to Keyboard Entry
[5]kdb>
As you can see, backtraces for the other CPUs start printing and get
interleaved with the kdb PANIC print.
Let's replicate the commands to flush the console in the kdb panic
entry point to avoid this.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230822131945.1.I5b460ae8f954e4c4f628a373d6e74713c06dd26f@changeid
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wayne Lin [Fri, 8 Sep 2023 02:14:49 +0000 (10:14 +0800)]
drm/amd/display: Avoid NULL dereference of timing generator
[ Upstream commit
b1904ed480cee3f9f4036ea0e36d139cb5fee2d6 ]
[Why & How]
Check whether assigned timing generator is NULL or not before
accessing its funcs to prevent NULL dereference.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Takashi Iwai [Fri, 22 Sep 2023 12:38:07 +0000 (14:38 +0200)]
media: imon: fix access to invalid resource for the second interface
[ Upstream commit
a1766a4fd83befa0b34d932d532e7ebb7fab1fa7 ]
imon driver probes two USB interfaces, and at the probe of the second
interface, the driver assumes blindly that the first interface got
bound with the same imon driver. It's usually true, but it's still
possible that the first interface is bound with another driver via a
malformed descriptor. Then it may lead to a memory corruption, as
spotted by syzkaller; imon driver accesses the data from drvdata as
struct imon_context object although it's a completely different one
that was assigned by another driver.
This patch adds a sanity check -- whether the first interface is
really bound with the imon driver or not -- for avoiding the problem
above at the probe time.
Reported-by: syzbot+59875ffef5cb9c9b29e9@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/
000000000000a838aa0603cc74d6@google.com/
Tested-by: Ricardo B. Marliere <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20230922005152.163640-1-ricardo@marliere.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sakari Ailus [Thu, 24 Aug 2023 12:18:18 +0000 (15:18 +0300)]
media: ccs: Fix driver quirk struct documentation
[ Upstream commit
441b5c63d71ec9ec5453328f7e83384ecc1dddd9 ]
Fix documentation for struct ccs_quirk, a device specific struct for
managing deviations from the standard. The flags field was drifted away
from where it should have been.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ilpo Järvinen [Wed, 13 Sep 2023 12:27:40 +0000 (15:27 +0300)]
media: cobalt: Use FIELD_GET() to extract Link Width
[ Upstream commit
f301fedbeecfdce91cb898d6fa5e62f269801fee ]
Use FIELD_GET() to extract PCIe Negotiated and Maximum Link Width fields
instead of custom masking and shifting.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Al Viro [Mon, 2 Oct 2023 02:33:44 +0000 (03:33 +0100)]
gfs2: fix an oops in gfs2_permission
[ Upstream commit
0abd1557e21c617bd13fc18f7725fc6363c05913 ]
In RCU mode, we might race with gfs2_evict_inode(), which zeroes
->i_gl. Freeing of the object it points to is RCU-delayed, so
if we manage to fetch the pointer before it's been replaced with
NULL, we are fine. Check if we'd fetched NULL and treat that
as "bail out and tell the caller to get out of RCU mode".
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bob Peterson [Thu, 21 Sep 2023 13:46:43 +0000 (08:46 -0500)]
gfs2: ignore negated quota changes
[ Upstream commit
4c6a08125f2249531ec01783a5f4317d7342add5 ]
When lots of quota changes are made, there may be cases in which an
inode's quota information is increased and then decreased, such as when
blocks are added to a file, then deleted from it. If the timing is
right, function do_qc can add pending quota changes to a transaction,
then later, another call to do_qc can negate those changes, resulting
in a net gain of 0. The quota_change information is recorded in the qc
buffer (and qd element of the inode as well). The buffer is added to the
transaction by the first call to do_qc, but a subsequent call changes
the value from non-zero back to zero. At that point it's too late to
remove the buffer_head from the transaction. Later, when the quota sync
code is called, the zero-change qd element is discovered and flagged as
an assert warning. If the fs is mounted with errors=panic, the kernel
will panic.
This is usually seen when files are truncated and the quota changes are
negated by punch_hole/truncate which uses gfs2_quota_hold and
gfs2_quota_unhold rather than block allocations that use gfs2_quota_lock
and gfs2_quota_unlock which automatically do quota sync.
This patch solves the problem by adding a check to qd_check_sync such
that net-zero quota changes already added to the transaction are no
longer deemed necessary to be synced, and skipped.
In this case references are taken for the qd and the slot from do_qc
so those need to be put. The normal sequence of events for a normal
non-zero quota change is as follows:
gfs2_quota_change
do_qc
qd_hold
slot_hold
Later, when the changes are to be synced:
gfs2_quota_sync
qd_fish
qd_check_sync
gets qd ref via lockref_get_not_dead
do_sync
do_qc(QC_SYNC)
qd_put
lockref_put_or_lock
qd_unlock
qd_put
lockref_put_or_lock
In the net-zero change case, we add a check to qd_check_sync so it puts
the qd and slot references acquired in gfs2_quota_change and skip the
unneeded sync.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans Verkuil [Sat, 23 Sep 2023 15:20:48 +0000 (17:20 +0200)]
media: vivid: avoid integer overflow
[ Upstream commit
4567ebf8e8f9546b373e78e3b7d584cc30b62028 ]
Fixes these compiler warnings:
drivers/media/test-drivers/vivid/vivid-rds-gen.c: In function 'vivid_rds_gen_fill':
drivers/media/test-drivers/vivid/vivid-rds-gen.c:147:56: warning: '.' directive output may be truncated writing 1 byte into a region of size between 0 and 3 [-Wformat-truncation=]
147 | snprintf(rds->psname, sizeof(rds->psname), "%6d.%1d",
| ^
drivers/media/test-drivers/vivid/vivid-rds-gen.c:147:52: note: directive argument in the range [0, 9]
147 | snprintf(rds->psname, sizeof(rds->psname), "%6d.%1d",
| ^~~~~~~~~
drivers/media/test-drivers/vivid/vivid-rds-gen.c:147:9: note: 'snprintf' output between 9 and 12 bytes into a destination of size 9
147 | snprintf(rds->psname, sizeof(rds->psname), "%6d.%1d",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
148 | freq / 16, ((freq & 0xf) * 10) / 16);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rajeshwar R Shinde [Wed, 30 Aug 2023 07:44:01 +0000 (13:14 +0530)]
media: gspca: cpia1: shift-out-of-bounds in set_flicker
[ Upstream commit
099be1822d1f095433f4b08af9cc9d6308ec1953 ]
Syzkaller reported the following issue:
UBSAN: shift-out-of-bounds in drivers/media/usb/gspca/cpia1.c:1031:27
shift exponent 245 is too large for 32-bit type 'int'
When the value of the variable "sd->params.exposure.gain" exceeds the
number of bits in an integer, a shift-out-of-bounds error is reported. It
is triggered because the variable "currentexp" cannot be left-shifted by
more than the number of bits in an integer. In order to avoid invalid
range during left-shift, the conditional expression is added.
Reported-by: syzbot+e27f3dbdab04e43b9f73@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/
20230818164522.12806-1-coolrrsh@gmail.com
Link: https://syzkaller.appspot.com/bug?extid=e27f3dbdab04e43b9f73
Signed-off-by: Rajeshwar R Shinde <coolrrsh@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Billy Tsai [Mon, 23 Oct 2023 08:02:37 +0000 (16:02 +0800)]
i3c: master: mipi-i3c-hci: Fix a kernel panic for accessing DAT_data.
[ Upstream commit
b53e9758a31c683fc8615df930262192ed5f034b ]
The `i3c_master_bus_init` function may attach the I2C devices before the
I3C bus initialization. In this flow, the DAT `alloc_entry`` will be used
before the DAT `init`. Additionally, if the `i3c_master_bus_init` fails,
the DAT `cleanup` will execute before the device is detached, which will
execue DAT `free_entry` function. The above scenario can cause the driver
to use DAT_data when it is NULL.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Link: https://lore.kernel.org/r/20231023080237.560936-1-billy_tsai@aspeedtech.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
zhenwei pi [Mon, 4 Sep 2023 06:10:45 +0000 (14:10 +0800)]
virtio-blk: fix implicit overflow on virtio_max_dma_size
[ Upstream commit
fafb51a67fb883eb2dde352539df939a251851be ]
The following codes have an implicit conversion from size_t to u32:
(u32)max_size = (size_t)virtio_max_dma_size(vdev);
This may lead overflow, Ex (size_t)4G -> (u32)0. Once
virtio_max_dma_size() has a larger size than U32_MAX, use U32_MAX
instead.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <
20230904061045.510460-1-pizhenwei@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Axel Lin [Wed, 13 Apr 2016 00:54:30 +0000 (08:54 +0800)]
i2c: sun6i-p2wi: Prevent potential division by zero
[ Upstream commit
5ac61d26b8baff5b2e5a9f3dc1ef63297e4b53e7 ]
Make sure we don't OOPS in case clock-frequency is set to 0 in a DT. The
variable set here is later used as a divisor.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wolfram Sang [Fri, 29 Sep 2023 09:19:52 +0000 (11:19 +0200)]
i2c: fix memleak in i2c_new_client_device()
[ Upstream commit
6af79f7fe748fe6a3c5c3a63d7f35981a82c2769 ]
Yang Yingliang reported a memleak:
===
I got memory leak as follows when doing fault injection test:
unreferenced object 0xffff888014aec078 (size 8):
comm "xrun", pid 356, jiffies
4294910619 (age 16.332s)
hex dump (first 8 bytes):
31 2d 30 30 31 63 00 00 1-001c..
backtrace:
[<
00000000eb56c0a9>] __kmalloc_track_caller+0x1a6/0x300
[<
000000000b220ea3>] kvasprintf+0xad/0x140
[<
00000000b83203e5>] kvasprintf_const+0x62/0x190
[<
000000002a5eab37>] kobject_set_name_vargs+0x56/0x140
[<
00000000300ac279>] dev_set_name+0xb0/0xe0
[<
00000000b66ebd6f>] i2c_new_client_device+0x7e4/0x9a0
If device_register() returns error in i2c_new_client_device(),
the name allocated by i2c_dev_set_name() need be freed. As
comment of device_register() says, it should use put_device()
to give up the reference in the error path.
===
I think this solution is less intrusive and more robust than he
originally proposed solutions, though.
Reported-by: Yang Yingliang <yangyingliang@huawei.com>
Closes: http://patchwork.ozlabs.org/project/linux-i2c/patch/
20221124085448.3620240-1-yangyingliang@huawei.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jarkko Nikula [Thu, 21 Sep 2023 05:56:56 +0000 (08:56 +0300)]
i3c: mipi-i3c-hci: Fix out of bounds access in hci_dma_irq_handler
[ Upstream commit
45a832f989e520095429589d5b01b0c65da9b574 ]
Do not loop over ring headers in hci_dma_irq_handler() that are not
allocated and enabled in hci_dma_init(). Otherwise out of bounds access
will occur from rings->headers[i] access when i >= number of allocated
ring headers.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20230921055704.1087277-5-jarkko.nikula@linux.intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dominique Martinet [Wed, 25 Oct 2023 10:34:44 +0000 (19:34 +0900)]
9p: v9fs_listxattr: fix %s null argument warning
[ Upstream commit
9b5c6281838fc84683dd99b47302d81fce399918 ]
W=1 warns about null argument to kprintf:
In file included from fs/9p/xattr.c:12:
In function ‘v9fs_xattr_get’,
inlined from ‘v9fs_listxattr’ at fs/9p/xattr.c:142:9:
include/net/9p/9p.h:55:2: error: ‘%s’ directive argument is null
[-Werror=format-overflow=]
55 | _p9_debug(level, __func__, fmt, ##__VA_ARGS__)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Use an empty string instead of :
- this is ok 9p-wise because p9pdu_vwritef serializes a null string
and an empty string the same way (one '0' word for length)
- since this degrades the print statements, add new single quotes for
xattr's name delimter (Old: "file = (null)", new: "file = ''")
Link: https://lore.kernel.org/r/20231008060138.517057-1-suhui@nfschina.com
Suggested-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Acked-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Message-ID: <
20231025103445.1248103-2-asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marco Elver [Wed, 25 Oct 2023 10:34:43 +0000 (19:34 +0900)]
9p/trans_fd: Annotate data-racy writes to file::f_flags
[ Upstream commit
355f074609dbf3042900ea9d30fcd2b0c323a365 ]
syzbot reported:
| BUG: KCSAN: data-race in p9_fd_create / p9_fd_create
|
| read-write to 0xffff888130fb3d48 of 4 bytes by task 15599 on cpu 0:
| p9_fd_open net/9p/trans_fd.c:842 [inline]
| p9_fd_create+0x210/0x250 net/9p/trans_fd.c:1092
| p9_client_create+0x595/0xa70 net/9p/client.c:1010
| v9fs_session_init+0xf9/0xd90 fs/9p/v9fs.c:410
| v9fs_mount+0x69/0x630 fs/9p/vfs_super.c:123
| legacy_get_tree+0x74/0xd0 fs/fs_context.c:611
| vfs_get_tree+0x51/0x190 fs/super.c:1519
| do_new_mount+0x203/0x660 fs/namespace.c:3335
| path_mount+0x496/0xb30 fs/namespace.c:3662
| do_mount fs/namespace.c:3675 [inline]
| __do_sys_mount fs/namespace.c:3884 [inline]
| [...]
|
| read-write to 0xffff888130fb3d48 of 4 bytes by task 15563 on cpu 1:
| p9_fd_open net/9p/trans_fd.c:842 [inline]
| p9_fd_create+0x210/0x250 net/9p/trans_fd.c:1092
| p9_client_create+0x595/0xa70 net/9p/client.c:1010
| v9fs_session_init+0xf9/0xd90 fs/9p/v9fs.c:410
| v9fs_mount+0x69/0x630 fs/9p/vfs_super.c:123
| legacy_get_tree+0x74/0xd0 fs/fs_context.c:611
| vfs_get_tree+0x51/0x190 fs/super.c:1519
| do_new_mount+0x203/0x660 fs/namespace.c:3335
| path_mount+0x496/0xb30 fs/namespace.c:3662
| do_mount fs/namespace.c:3675 [inline]
| __do_sys_mount fs/namespace.c:3884 [inline]
| [...]
|
| value changed: 0x00008002 -> 0x00008802
Within p9_fd_open(), O_NONBLOCK is added to f_flags of the read and
write files. This may happen concurrently if e.g. mounting process
modifies the fd in another thread.
Mark the plain read-modify-writes as intentional data-races, with the
assumption that the result of executing the accesses concurrently will
always result in the same result despite the accesses themselves not
being atomic.
Reported-by: syzbot+e441aeeb422763cc5511@syzkaller.appspotmail.com
Signed-off-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/ZO38mqkS0TYUlpFp@elver.google.com
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Message-ID: <
20231025103445.1248103-1-asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hardik Gajjar [Fri, 20 Oct 2023 15:33:24 +0000 (17:33 +0200)]
usb: gadget: f_ncm: Always set current gadget in ncm_bind()
[ Upstream commit
a04224da1f3424b2c607b12a3bd1f0e302fb8231 ]
Previously, gadget assignment to the net device occurred exclusively
during the initial binding attempt.
Nevertheless, the gadget pointer could change during bind/unbind
cycles due to various conditions, including the unloading/loading
of the UDC device driver or the detachment/reconnection of an
OTG-capable USB hub device.
This patch relocates the gether_set_gadget() function out from
ncm_opts->bound condition check, ensuring that the correct gadget
is assigned during each bind request.
The provided logs demonstrate the consistency of ncm_opts throughout
the power cycle, while the gadget may change.
* OTG hub connected during boot up and assignment of gadget and
ncm_opts pointer
[ 2.366301] usb 2-1.5: New USB device found, idVendor=2996, idProduct=0105
[ 2.366304] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.366306] usb 2-1.5: Product: H2H Bridge
[ 2.366308] usb 2-1.5: Manufacturer: Aptiv
[ 2.366309] usb 2-1.5: SerialNumber:
13FEB2021
[ 2.427989] usb 2-1.5: New USB device found, VID=2996, PID=0105
[ 2.428959] dabridge 2-1.5:1.0: dabridge 2-4 total endpoints=5,
0000000093a8d681
[ 2.429710] dabridge 2-1.5:1.0: P(0105) D(22.06.22) F(17.3.16) H(1.1) high-speed
[ 2.429714] dabridge 2-1.5:1.0: Hub 2-2 P(0151) V(06.87)
[ 2.429956] dabridge 2-1.5:1.0: All downstream ports in host mode
[ 2.430093] gadget
000000003c414d59 ------> gadget pointer
* NCM opts and associated gadget pointer during First ncm_bind
[ 34.763929] NCM opts
00000000aa304ac9
[ 34.763930] NCM gadget
000000003c414d59
* OTG capable hub disconnecte or assume driver unload.
[ 97.203114] usb 2-1: USB disconnect, device number 2
[ 97.203118] usb 2-1.1: USB disconnect, device number 3
[ 97.209217] usb 2-1.5: USB disconnect, device number 4
[ 97.230990] dabr_udc deleted
* Reconnect the OTG hub or load driver assaign new gadget pointer.
[ 111.534035] usb 2-1.1: New USB device found, idVendor=2996, idProduct=0120, bcdDevice= 6.87
[ 111.534038] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 111.534040] usb 2-1.1: Product: Vendor
[ 111.534041] usb 2-1.1: Manufacturer: Aptiv
[ 111.534042] usb 2-1.1: SerialNumber: Superior
[ 111.535175] usb 2-1.1: New USB device found, VID=2996, PID=0120
[ 111.610995] usb 2-1.5: new high-speed USB device number 8 using xhci-hcd
[ 111.630052] usb 2-1.5: New USB device found, idVendor=2996, idProduct=0105, bcdDevice=21.02
[ 111.630055] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 111.630057] usb 2-1.5: Product: H2H Bridge
[ 111.630058] usb 2-1.5: Manufacturer: Aptiv
[ 111.630059] usb 2-1.5: SerialNumber:
13FEB2021
[ 111.687464] usb 2-1.5: New USB device found, VID=2996, PID=0105
[ 111.690375] dabridge 2-1.5:1.0: dabridge 2-8 total endpoints=5,
000000000d87c961
[ 111.691172] dabridge 2-1.5:1.0: P(0105) D(22.06.22) F(17.3.16) H(1.1) high-speed
[ 111.691176] dabridge 2-1.5:1.0: Hub 2-6 P(0151) V(06.87)
[ 111.691646] dabridge 2-1.5:1.0: All downstream ports in host mode
[ 111.692298] gadget
00000000dc72f7a9 --------> new gadget ptr on connect
* NCM opts and associated gadget pointer during second ncm_bind
[ 113.271786] NCM opts
00000000aa304ac9 -----> same opts ptr used during first bind
[ 113.271788] NCM gadget
00000000dc72f7a9 ----> however new gaget ptr, that will not set
in net_device due to ncm_opts->bound = true
Signed-off-by: Hardik Gajjar <hgajjar@de.adit-jv.com>
Link: https://lore.kernel.org/r/20231020153324.82794-1-hgajjar@de.adit-jv.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhiguo Niu [Wed, 18 Oct 2023 06:51:02 +0000 (14:51 +0800)]
f2fs: fix error handling of __get_node_page
[ Upstream commit
9b4c8dd99fe48721410741651d426015e03a4b7a ]
Use f2fs_handle_error to record inconsistent node block error
and return -EFSCORRUPTED instead of -EINVAL.
Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pierre-Louis Bossart [Fri, 13 Oct 2023 01:08:33 +0000 (09:08 +0800)]
soundwire: dmi-quirks: update HP Omen match
[ Upstream commit
4ea2b6d3128ea4d502c4015df0dc16b7d1070954 ]
New platforms have a slightly different DMI product name, remove
trailing characters/digits to handle all cases
Closes: https://github.com/thesofproject/linux/issues/4611
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20231013010833.114271-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stanley Chang [Tue, 12 Sep 2023 04:19:02 +0000 (12:19 +0800)]
usb: dwc3: core: configure TX/RX threshold for DWC3_IP
[ Upstream commit
e72fc8d6a12af7ae8dd1b52cf68ed68569d29f80 ]
In Synopsys's dwc3 data book:
To avoid underrun and overrun during the burst, in a high-latency bus
system (like USB), threshold and burst size control is provided through
GTXTHRCFG and GRXTHRCFG registers.
In Realtek DHC SoC, DWC3 USB 3.0 uses AHB system bus. When dwc3 is
connected with USB 2.5G Ethernet, there will be overrun problem.
Therefore, setting TX/RX thresholds can avoid this issue.
Signed-off-by: Stanley Chang <stanley_chang@realtek.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20230912041904.30721-1-stanley_chang@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yi Yang [Mon, 4 Sep 2023 03:52:20 +0000 (11:52 +0800)]
tty: vcc: Add check for kstrdup() in vcc_probe()
[ Upstream commit
d81ffb87aaa75f842cd7aa57091810353755b3e6 ]
Add check for the return value of kstrdup() and return the error, if it
fails in order to avoid NULL pointer dereference.
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230904035220.48164-1-yiyang13@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mika Westerberg [Fri, 25 Aug 2023 07:10:35 +0000 (10:10 +0300)]
thunderbolt: Apply USB 3.x bandwidth quirk only in software connection manager
[ Upstream commit
0c35ac18256942e66d8dab6ca049185812e60c69 ]
This is not needed when firmware connection manager is run so limit this
to software connection manager.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Shurong [Sat, 15 Jul 2023 15:55:50 +0000 (23:55 +0800)]
iio: adc: stm32-adc: harden against NULL pointer deref in stm32_adc_probe()
[ Upstream commit
3a23b384e7e3d64d5587ad10729a34d4f761517e ]
of_match_device() may fail and returns a NULL pointer.
In practice there is no known reasonable way to trigger this, but
in case one is added in future, harden the code by adding the check
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Link: https://lore.kernel.org/r/tencent_994DA85912C937E3B5405BA960B31ED90A08@qq.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jarkko Nikula [Mon, 2 Oct 2023 08:33:44 +0000 (11:33 +0300)]
mfd: intel-lpss: Add Intel Lunar Lake-M PCI IDs
[ Upstream commit
e53b22b10c6e0de0cf2a03a92b18fdad70f266c7 ]
Add Intel Lunar Lake-M SoC PCI IDs.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20231002083344.75611-1-jarkko.nikula@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yuezhang Mo [Thu, 20 Jul 2023 06:23:08 +0000 (14:23 +0800)]
exfat: support handle zero-size directory
[ Upstream commit
dab48b8f2fe7264d51ec9eed0adea0fe3c78830a ]
After repairing a corrupted file system with exfatprogs' fsck.exfat,
zero-size directories may result. It is also possible to create
zero-size directories in other exFAT implementation, such as Paragon
ufsd dirver.
As described in the specification, the lower directory size limits
is 0 bytes.
Without this commit, sub-directories and files cannot be created
under a zero-size directory, and it cannot be removed.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiri Kosina [Fri, 27 Oct 2023 13:32:09 +0000 (15:32 +0200)]
HID: Add quirk for Dell Pro Wireless Keyboard and Mouse KM5221W
[ Upstream commit
62cc9c3cb3ec1bf31cc116146185ed97b450836a ]
This device needs ALWAYS_POLL quirk, otherwise it keeps reconnecting
indefinitely.
Reported-by: Robert Ayrapetyan <robert.ayrapetyan@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Longfang Liu [Fri, 20 Oct 2023 09:35:58 +0000 (17:35 +0800)]
crypto: hisilicon/qm - prevent soft lockup in receive loop
[ Upstream commit
33fc506d2ac514be1072499a263c3bff8c7c95a0 ]
In the scenario where the accelerator business is fully loaded.
When the workqueue receiving messages and performing callback
processing, there are a large number of messages that need to be
received, and there are continuously messages that have been
processed and need to be received.
This will cause the receive loop here to be locked for a long time.
This scenario will cause watchdog timeout problems on OS with kernel
preemption turned off.
The error logs:
watchdog: BUG: soft lockup - CPU#23 stuck for 23s! [kworker/u262:1:1407]
[ 1461.978428][ C23] Call trace:
[ 1461.981890][ C23] complete+0x8c/0xf0
[ 1461.986031][ C23] kcryptd_async_done+0x154/0x1f4 [dm_crypt]
[ 1461.992154][ C23] sec_skcipher_callback+0x7c/0xf4 [hisi_sec2]
[ 1461.998446][ C23] sec_req_cb+0x104/0x1f4 [hisi_sec2]
[ 1462.003950][ C23] qm_poll_req_cb+0xcc/0x150 [hisi_qm]
[ 1462.009531][ C23] qm_work_process+0x60/0xc0 [hisi_qm]
[ 1462.015101][ C23] process_one_work+0x1c4/0x470
[ 1462.020052][ C23] worker_thread+0x150/0x3c4
[ 1462.024735][ C23] kthread+0x108/0x13c
[ 1462.028889][ C23] ret_from_fork+0x10/0x18
Therefore, it is necessary to add an actively scheduled operation in the
while loop to prevent this problem.
After adding it, no matter whether the OS turns on or off the kernel
preemption function. Neither will cause watchdog timeout issues.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Sat, 21 Oct 2023 21:15:28 +0000 (23:15 +0200)]
ASoC: Intel: soc-acpi-cht: Add Lenovo Yoga Tab 3 Pro YT3-X90 quirk
[ Upstream commit
2cb54788393134d8174ee594002baae3ce52c61e ]
The Lenovo Yoga Tab 3 Pro YT3-X90 x86 tablet, which ships with Android with
a custom kernel as factory OS, does not list the used WM5102 codec inside
its DSDT.
Workaround this with a new snd_soc_acpi_intel_baytrail_machines[] entry
which matches on the SST id instead of the codec id like nocodec does,
combined with using a machine_quirk callback which returns NULL on
other machines to skip the new entry on other machines.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231021211534.114991-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bjorn Helgaas [Tue, 10 Oct 2023 20:44:28 +0000 (15:44 -0500)]
PCI: Use FIELD_GET() in Sapphire RX 5600 XT Pulse quirk
[ Upstream commit
04e82fa5951ca66495d7b05665eff673aa3852b4 ]
Use FIELD_GET() to remove dependences on the field position, i.e., the
shift value. No functional change intended.
Separate because this isn't as trivial as the other FIELD_GET() changes.
See
907830b0fc9e ("PCI: Add a REBAR size quirk for Sapphire RX 5600 XT
Pulse")
Link: https://lore.kernel.org/r/20231010204436.1000644-3-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yoshihiro Shimoda [Wed, 18 Oct 2023 08:56:31 +0000 (17:56 +0900)]
misc: pci_endpoint_test: Add Device ID for R-Car S4-8 PCIe controller
[ Upstream commit
6c4b39937f4e65688ea294725ae432b2565821ff ]
Add Renesas R8A779F0 in pci_device_id table so that pci-epf-test
can be used for testing PCIe EP on R-Car S4-8.
Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-16-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bartosz Pawlowski [Fri, 8 Sep 2023 14:36:06 +0000 (14:36 +0000)]
PCI: Disable ATS for specific Intel IPU E2000 devices
[ Upstream commit
a18615b1cfc04f00548c60eb9a77e0ce56e848fd ]
Due to a hardware issue in A and B steppings of Intel IPU E2000, it expects
wrong endianness in ATS invalidation message body. This problem can lead to
outdated translations being returned as valid and finally cause system
instability.
To prevent such issues, add quirk_intel_e2000_no_ats() to disable ATS for
vulnerable IPU E2000 devices.
Link: https://lore.kernel.org/r/20230908143606.685930-3-bartosz.pawlowski@intel.com
Signed-off-by: Bartosz Pawlowski <bartosz.pawlowski@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bartosz Pawlowski [Fri, 8 Sep 2023 14:36:05 +0000 (14:36 +0000)]
PCI: Extract ATS disabling to a helper function
[ Upstream commit
f18b1137d38c091cc8c16365219f0a1d4a30b3d1 ]
Introduce quirk_no_ats() helper function to provide a standard way to
disable ATS capability in PCI quirks.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230908143606.685930-2-bartosz.pawlowski@intel.com
Signed-off-by: Bartosz Pawlowski <bartosz.pawlowski@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ilpo Järvinen [Tue, 19 Sep 2023 12:56:46 +0000 (15:56 +0300)]
PCI: Use FIELD_GET() to extract Link Width
[ Upstream commit
d1f9b39da4a5347150246871325190018cda8cb3 ]
Use FIELD_GET() to extract PCIe Negotiated and Maximum Link Width fields
instead of custom masking and shifting.
Link: https://lore.kernel.org/r/20230919125648.1920-7-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: drop duplicate include of <linux/bitfield.h>]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wenchao Hao [Wed, 11 Oct 2023 13:03:50 +0000 (21:03 +0800)]
scsi: libfc: Fix potential NULL pointer dereference in fc_lport_ptp_setup()
[ Upstream commit
4df105f0ce9f6f30cda4e99f577150d23f0c9c5f ]
fc_lport_ptp_setup() did not check the return value of fc_rport_create()
which can return NULL and would cause a NULL pointer dereference. Address
this issue by checking return value of fc_rport_create() and log error
message on fc_rport_create() failed.
Signed-off-by: Wenchao Hao <haowenchao2@huawei.com>
Link: https://lore.kernel.org/r/20231011130350.819571-1-haowenchao2@huawei.com
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ilpo Järvinen [Mon, 11 Sep 2023 12:53:52 +0000 (15:53 +0300)]
PCI: Do error check on own line to split long "if" conditions
[ Upstream commit
d15f18053e5cc5576af9e7eef0b2a91169b6326d ]
Placing PCI error code check inside "if" condition usually results in need
to split lines. Combined with additional conditions the "if" condition
becomes messy.
Convert to the usual error handling pattern with an additional variable to
improve code readability. In addition, reverse the logic in
pci_find_vsec_capability() to get rid of &&.
No functional changes intended.
Link: https://lore.kernel.org/r/20230911125354.25501-5-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: PCI_POSSIBLE_ERROR()]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ilpo Järvinen [Mon, 11 Sep 2023 12:53:51 +0000 (15:53 +0300)]
atm: iphase: Do PCI error checks on own line
[ Upstream commit
c28742447ca9879b52fbaf022ad844f0ffcd749c ]
In get_esi() PCI errors are checked inside line-split "if" conditions (in
addition to the file not following the coding style). To make the code in
get_esi() more readable, fix the coding style and use the usual error
handling pattern with a separate variable.
In addition, initialization of 'error' variable at declaration is not
needed.
No functional changes intended.
Link: https://lore.kernel.org/r/20230911125354.25501-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ilpo Järvinen [Tue, 19 Sep 2023 12:56:45 +0000 (15:56 +0300)]
PCI: mvebu: Use FIELD_PREP() with Link Width
[ Upstream commit
408599ec561ad5862cda4f107626009f6fa97a74 ]
mvebu_pcie_setup_hw() setups the Maximum Link Width field in the Link
Capabilities registers using an open-coded variant of FIELD_PREP() with
a literal in shift. Improve readability by using
FIELD_PREP(PCI_EXP_LNKCAP_MLW, ...).
Link: https://lore.kernel.org/r/20230919125648.1920-6-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ilpo Järvinen [Tue, 19 Sep 2023 12:56:44 +0000 (15:56 +0300)]
PCI: tegra194: Use FIELD_GET()/FIELD_PREP() with Link Width fields
[ Upstream commit
759574abd78e3b47ec45bbd31a64e8832cf73f97 ]
Use FIELD_GET() to extract PCIe Negotiated Link Width field instead of
custom masking and shifting.
Similarly, change custom code that misleadingly used
PCI_EXP_LNKSTA_NLW_SHIFT to prepare value for PCI_EXP_LNKCAP write
to use FIELD_PREP() with correct field define (PCI_EXP_LNKCAP_MLW).
Link: https://lore.kernel.org/r/20230919125648.1920-5-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Cezary Rojewski [Fri, 6 Oct 2023 10:28:55 +0000 (12:28 +0200)]
ALSA: hda: Fix possible null-ptr-deref when assigning a stream
[ Upstream commit
f93dc90c2e8ed664985e366aa6459ac83cdab236 ]
While AudioDSP drivers assign streams exclusively of HOST or LINK type,
nothing blocks a user to attempt to assign a COUPLED stream. As
supplied substream instance may be a stub, what is the case when
code-loading, such scenario ends with null-ptr-deref.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20231006102857.749143-2-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vincent Whitchurch [Mon, 21 Aug 2023 07:45:21 +0000 (08:45 +0100)]
ARM: 9320/1: fix stack depot IRQ stack filter
[ Upstream commit
b0150014878c32197cfa66e3e2f79e57f66babc0 ]
Place IRQ handlers such as gic_handle_irq() in the irqentry section even
if FUNCTION_GRAPH_TRACER is not enabled. Without this, the stack
depot's filter_irq_stacks() does not correctly filter out IRQ stacks in
those configurations, which hampers deduplication and eventually leads
to "Stack depot reached limit capacity" splats with KASAN.
A similar fix was done for arm64 in commit
f6794950f0e5ba37e3bbed
("arm64: set __exception_irq_entry with __irq_entry as a default").
Link: https://lore.kernel.org/r/20230803-arm-irqentry-v1-1-8aad8e260b1c@axis.com
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mikhail Khvainitski [Sat, 23 Sep 2023 22:58:30 +0000 (01:58 +0300)]
HID: lenovo: Detect quirk-free fw on cptkbd and stop applying workaround
[ Upstream commit
46a0a2c96f0f47628190f122c2e3d879e590bcbe ]
Built-in firmware of cptkbd handles scrolling by itself (when middle
button is pressed) but with issues: it does not support horizontal and
hi-res scrolling and upon middle button release it sends middle button
click even if there was a scrolling event. Commit
3cb5ff0220e3 ("HID:
lenovo: Hide middle-button press until release") workarounds last
issue but it's impossible to workaround scrolling-related issues
without firmware modification.
Likely, Dennis Schneider has reverse engineered the firmware and
provided an instruction on how to patch it [1]. However,
aforementioned workaround prevents userspace (libinput) from knowing
exact moment when middle button has been pressed down and performing
"On-Button scrolling". This commit detects correctly-behaving patched
firmware if cursor movement events has been received during middle
button being pressed and stops applying workaround for this device.
Link: https://hohlerde.org/rauch/en/elektronik/projekte/tpkbd-fix/
Signed-off-by: Mikhail Khvainitski <me@khvoinitsky.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Manas Ghandat [Wed, 4 Oct 2023 07:40:40 +0000 (13:10 +0530)]
jfs: fix array-index-out-of-bounds in diAlloc
[ Upstream commit
05d9ea1ceb62a55af6727a69269a4fd310edf483 ]
Currently there is not check against the agno of the iag while
allocating new inodes to avoid fragmentation problem. Added the check
which is required.
Reported-by: syzbot+79d792676d8ac050949f@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=
79d792676d8ac050949f
Signed-off-by: Manas Ghandat <ghandatmanas@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Manas Ghandat [Wed, 4 Oct 2023 05:47:18 +0000 (11:17 +0530)]
jfs: fix array-index-out-of-bounds in dbFindLeaf
[ Upstream commit
22cad8bc1d36547cdae0eef316c47d917ce3147c ]
Currently while searching for dmtree_t for sufficient free blocks there
is an array out of bounds while getting element in tp->dm_stree. To add
the required check for out of bound we first need to determine the type
of dmtree. Thus added an extra parameter to dbFindLeaf so that the type
of tree can be determined and the required check can be applied.
Reported-by: syzbot+aea1ad91e854d0a83e04@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=
aea1ad91e854d0a83e04
Signed-off-by: Manas Ghandat <ghandatmanas@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Juntong Deng [Tue, 3 Oct 2023 18:06:41 +0000 (02:06 +0800)]
fs/jfs: Add validity check for db_maxag and db_agpref
[ Upstream commit
64933ab7b04881c6c18b21ff206c12278341c72e ]
Both db_maxag and db_agpref are used as the index of the
db_agfree array, but there is currently no validity check for
db_maxag and db_agpref, which can lead to errors.
The following is related bug reported by Syzbot:
UBSAN: array-index-out-of-bounds in fs/jfs/jfs_dmap.c:639:20
index 7936 is out of range for type 'atomic_t[128]'
Add checking that the values of db_maxag and db_agpref are valid
indexes for the db_agfree array.
Reported-by: syzbot+38e876a8aa44b7115c76@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=
38e876a8aa44b7115c76
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Juntong Deng [Mon, 2 Oct 2023 09:56:58 +0000 (17:56 +0800)]
fs/jfs: Add check for negative db_l2nbperpage
[ Upstream commit
525b861a008143048535011f3816d407940f4bfa ]
l2nbperpage is log2(number of blks per page), and the minimum legal
value should be 0, not negative.
In the case of l2nbperpage being negative, an error will occur
when subsequently used as shift exponent.
Syzbot reported this bug:
UBSAN: shift-out-of-bounds in fs/jfs/jfs_dmap.c:799:12
shift exponent -
16777216 is negative
Reported-by: syzbot+debee9ab7ae2b34b0307@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=
debee9ab7ae2b34b0307
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tyrel Datwyler [Thu, 21 Sep 2023 22:54:25 +0000 (17:54 -0500)]
scsi: ibmvfc: Remove BUG_ON in the case of an empty event pool
[ Upstream commit
b39f2d10b86d0af353ea339e5815820026bca48f ]
In practice the driver should never send more commands than are allocated
to a queue's event pool. In the unlikely event that this happens, the code
asserts a BUG_ON, and in the case that the kernel is not configured to
crash on panic returns a junk event pointer from the empty event list
causing things to spiral from there. This BUG_ON is a historical artifact
of the ibmvfc driver first being upstreamed, and it is well known now that
the use of BUG_ON is bad practice except in the most unrecoverable
scenario. There is nothing about this scenario that prevents the driver
from recovering and carrying on.
Remove the BUG_ON in question from ibmvfc_get_event() and return a NULL
pointer in the case of an empty event pool. Update all call sites to
ibmvfc_get_event() to check for a NULL pointer and perfrom the appropriate
failure or recovery action.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20230921225435.3537728-2-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yihang Li [Wed, 13 Sep 2023 02:15:25 +0000 (10:15 +0800)]
scsi: hisi_sas: Set debugfs_dir pointer to NULL after removing debugfs
[ Upstream commit
6de426f9276c448e2db7238911c97fb157cb23be ]
If init debugfs failed during device registration due to memory allocation
failure, debugfs_remove_recursive() is called, after which debugfs_dir is
not set to NULL. debugfs_remove_recursive() will be called again during
device removal. As a result, illegal pointer is accessed.
[ 1665.467244] hisi_sas_v3_hw 0000:b4:02.0: failed to init debugfs!
...
[ 1669.836708] Unable to handle kernel NULL pointer dereference at virtual address
00000000000000a0
[ 1669.872669] pc : down_write+0x24/0x70
[ 1669.876315] lr : down_write+0x1c/0x70
[ 1669.879961] sp :
ffff000036f53a30
[ 1669.883260] x29:
ffff000036f53a30 x28:
ffffa027c31549f8
[ 1669.888547] x27:
ffffa027c3140000 x26:
0000000000000000
[ 1669.893834] x25:
ffffa027bf37c270 x24:
ffffa027bf37c270
[ 1669.899122] x23:
ffff0000095406b8 x22:
ffff0000095406a8
[ 1669.904408] x21:
0000000000000000 x20:
ffffa027bf37c310
[ 1669.909695] x19:
00000000000000a0 x18:
ffff8027dcd86f10
[ 1669.914982] x17:
0000000000000000 x16:
0000000000000000
[ 1669.920268] x15:
0000000000000000 x14:
ffffa0274014f870
[ 1669.925555] x13:
0000000000000040 x12:
0000000000000228
[ 1669.930842] x11:
0000000000000020 x10:
0000000000000bb0
[ 1669.936129] x9 :
ffff000036f537f0 x8 :
ffff80273088ca10
[ 1669.941416] x7 :
000000000000001d x6 :
00000000ffffffff
[ 1669.946702] x5 :
ffff000008a36310 x4 :
ffff80273088be00
[ 1669.951989] x3 :
ffff000009513e90 x2 :
0000000000000000
[ 1669.957276] x1 :
00000000000000a0 x0 :
ffffffff00000001
[ 1669.962563] Call trace:
[ 1669.965000] down_write+0x24/0x70
[ 1669.968301] debugfs_remove_recursive+0x5c/0x1b0
[ 1669.972905] hisi_sas_debugfs_exit+0x24/0x30 [hisi_sas_main]
[ 1669.978541] hisi_sas_v3_remove+0x130/0x150 [hisi_sas_v3_hw]
[ 1669.984175] pci_device_remove+0x48/0xd8
[ 1669.988082] device_release_driver_internal+0x1b4/0x250
[ 1669.993282] device_release_driver+0x28/0x38
[ 1669.997534] pci_stop_bus_device+0x84/0xb8
[ 1670.001611] pci_stop_and_remove_bus_device_locked+0x24/0x40
[ 1670.007244] remove_store+0xfc/0x140
[ 1670.010802] dev_attr_store+0x44/0x60
[ 1670.014448] sysfs_kf_write+0x58/0x80
[ 1670.018095] kernfs_fop_write+0xe8/0x1f0
[ 1670.022000] __vfs_write+0x60/0x190
[ 1670.025472] vfs_write+0xac/0x1c0
[ 1670.028771] ksys_write+0x6c/0xd8
[ 1670.032071] __arm64_sys_write+0x24/0x30
[ 1670.035977] el0_svc_common+0x78/0x130
[ 1670.039710] el0_svc_handler+0x38/0x78
[ 1670.043442] el0_svc+0x8/0xc
To fix this, set debugfs_dir to NULL after debugfs_remove_recursive().
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1694571327-78697-2-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ilpo Järvinen [Tue, 19 Sep 2023 12:56:41 +0000 (15:56 +0300)]
RDMA/hfi1: Use FIELD_GET() to extract Link Width
[ Upstream commit
8bf7187d978610b9e327a3d92728c8864a575ebd ]
Use FIELD_GET() to extract PCIe Negotiated Link Width field instead of
custom masking and shifting, and remove extract_width() which only
wraps that FIELD_GET().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230919125648.1920-2-ilpo.jarvinen@linux.intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dean Luick <dean.luick@cornelisnetworks.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rander Wang [Tue, 19 Sep 2023 09:24:16 +0000 (12:24 +0300)]
ASoC: SOF: ipc4: handle EXCEPTION_CAUGHT notification from firmware
[ Upstream commit
c1c48fd6bbe788458e3685fea74bdb3cb148ff93 ]
Driver will receive exception IPC message and process it by
snd_sof_dsp_panic.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230919092416.4137-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lu Jialin [Mon, 4 Sep 2023 13:33:41 +0000 (13:33 +0000)]
crypto: pcrypt - Fix hungtask for PADATA_RESET
[ Upstream commit
8f4f68e788c3a7a696546291258bfa5fdb215523 ]
We found a hungtask bug in test_aead_vec_cfg as follows:
INFO: task cryptomgr_test:391009 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Call trace:
__switch_to+0x98/0xe0
__schedule+0x6c4/0xf40
schedule+0xd8/0x1b4
schedule_timeout+0x474/0x560
wait_for_common+0x368/0x4e0
wait_for_completion+0x20/0x30
wait_for_completion+0x20/0x30
test_aead_vec_cfg+0xab4/0xd50
test_aead+0x144/0x1f0
alg_test_aead+0xd8/0x1e0
alg_test+0x634/0x890
cryptomgr_test+0x40/0x70
kthread+0x1e0/0x220
ret_from_fork+0x10/0x18
Kernel panic - not syncing: hung_task: blocked tasks
For padata_do_parallel, when the return err is 0 or -EBUSY, it will call
wait_for_completion(&wait->completion) in test_aead_vec_cfg. In normal
case, aead_request_complete() will be called in pcrypt_aead_serial and the
return err is 0 for padata_do_parallel. But, when pinst->flags is
PADATA_RESET, the return err is -EBUSY for padata_do_parallel, and it
won't call aead_request_complete(). Therefore, test_aead_vec_cfg will
hung at wait_for_completion(&wait->completion), which will cause
hungtask.
The problem comes as following:
(padata_do_parallel) |
rcu_read_lock_bh(); |
err = -EINVAL; | (padata_replace)
| pinst->flags |= PADATA_RESET;
err = -EBUSY |
if (pinst->flags & PADATA_RESET) |
rcu_read_unlock_bh() |
return err
In order to resolve the problem, we replace the return err -EBUSY with
-EAGAIN, which means parallel_data is changing, and the caller should call
it again.
v3:
remove retry and just change the return err.
v2:
introduce padata_try_do_parallel() in pcrypt_aead_encrypt and
pcrypt_aead_decrypt to solve the hungtask.
Signed-off-by: Lu Jialin <lujialin4@huawei.com>
Signed-off-by: Guo Zihua <guozihua@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Richard Fitzgerald [Tue, 12 Sep 2023 16:32:05 +0000 (17:32 +0100)]
ASoC: SOF: Pass PCI SSID to machine driver
[ Upstream commit
ba2de401d32625fe538d3f2c00ca73740dd2d516 ]
Pass the PCI SSID of the audio interface through to the machine driver.
This allows the machine driver to use the SSID to uniquely identify the
specific hardware configuration and apply any platform-specific
configuration.
struct snd_sof_pdata is passed around inside the SOF code, but it then
passes configuration information to the machine driver through
struct snd_soc_acpi_mach and struct snd_soc_acpi_mach_params. So SSID
information has been added to both snd_sof_pdata and
snd_soc_acpi_mach_params.
PCI does not define 0x0000 as an invalid value so we can't use zero to
indicate that the struct member was not written. Instead a flag is
included to indicate that a value has been written to the
subsystem_vendor and subsystem_device members.
sof_pci_probe() creates the struct snd_sof_pdata. It is passed a struct
pci_dev so it can fill in the SSID value.
sof_machine_check() finds the appropriate struct snd_soc_acpi_mach. It
copies the SSID information across to the struct snd_soc_acpi_mach_params.
This done before calling any custom set_mach_params() so that it could be
used by the set_mach_params() callback to apply variant params.
The machine driver receives the struct snd_soc_acpi_mach as its
platform_data.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230912163207.3498161-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Richard Fitzgerald [Tue, 12 Sep 2023 16:32:04 +0000 (17:32 +0100)]
ASoC: soc-card: Add storage for PCI SSID
[ Upstream commit
47f56e38a199bd45514b8e0142399cba4feeaf1a ]
Add members to struct snd_soc_card to store the PCI subsystem ID (SSID)
of the soundcard.
The PCI specification provides two registers to store a vendor-specific
SSID that can be read by drivers to uniquely identify a particular
"soundcard". This is defined in the PCI specification to distinguish
products that use the same silicon (and therefore have the same silicon
ID) so that product-specific differences can be applied.
PCI only defines 0xFFFF as an invalid value. 0x0000 is not defined as
invalid. So the usual pattern of zero-filling the struct and then
assuming a zero value unset will not work. A flag is included to
indicate when the SSID information has been filled in.
Unlike DMI information, which has a free-format entirely up to the vendor,
the PCI SSID has a strictly defined format and a registry of vendor IDs.
It is usual in Windows drivers that the SSID is used as the sole identifier
of the specific end-product and the Windows driver contains tables mapping
that to information about the hardware setup, rather than using ACPI
properties.
This SSID is important information for ASoC components that need to apply
hardware-specific configuration on PCI-based systems.
As the SSID is a generic part of the PCI specification and is treated as
identifying the "soundcard", it is reasonable to include this information
in struct snd_soc_card, instead of components inventing their own custom
ways to pass this information around.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230912163207.3498161-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
zhujun2 [Wed, 18 Oct 2023 01:59:21 +0000 (18:59 -0700)]
selftests/efivarfs: create-read: fix a resource leak
[ Upstream commit
3f6f8a8c5e11a9b384a36df4f40f0c9a653b6975 ]
The opened file should be closed in main(), otherwise resource
leak will occur that this problem was discovered by code reading
Signed-off-by: zhujun2 <zhujun2@cmss.chinamobile.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Laurentiu Tudor [Mon, 25 Sep 2023 15:10:15 +0000 (18:10 +0300)]
arm64: dts: ls208xa: use a pseudo-bus to constrain usb dma size
[ Upstream commit
b39d5016456871a88f5cd141914a5043591b46f3 ]
Wrap the usb controllers in an intermediate simple-bus and use it to
constrain the dma address size of these usb controllers to the 40b
that they generate toward the interconnect. This is required because
the SoC uses 48b address sizes and this mismatch would lead to smmu
context faults [1] because the usb generates 40b addresses while the
smmu page tables are populated with 48b wide addresses.
[1]
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002000010
xhci-hcd xhci-hcd.0.auto: irq 108, io mem 0x03100000
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0xffffffb000, fsynr=0x0, cbfrsynra=0xc01, cb=3
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qu Huang [Mon, 23 Oct 2023 12:56:37 +0000 (12:56 +0000)]
drm/amdgpu: Fix a null pointer access when the smc_rreg pointer is NULL
[ Upstream commit
5104fdf50d326db2c1a994f8b35dcd46e63ae4ad ]
In certain types of chips, such as VEGA20, reading the amdgpu_regs_smc file could result in an abnormal null pointer access when the smc_rreg pointer is NULL. Below are the steps to reproduce this issue and the corresponding exception log:
1. Navigate to the directory: /sys/kernel/debug/dri/0
2. Execute command: cat amdgpu_regs_smc
3. Exception Log::
[4005007.702554] BUG: kernel NULL pointer dereference, address:
0000000000000000
[4005007.702562] #PF: supervisor instruction fetch in kernel mode
[4005007.702567] #PF: error_code(0x0010) - not-present page
[4005007.702570] PGD 0 P4D 0
[4005007.702576] Oops: 0010 [#1] SMP NOPTI
[4005007.702581] CPU: 4 PID: 62563 Comm: cat Tainted: G OE 5.15.0-43-generic #46-Ubunt u
[4005007.702590] RIP: 0010:0x0
[4005007.702598] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
[4005007.702600] RSP: 0018:
ffffa82b46d27da0 EFLAGS:
00010206
[4005007.702605] RAX:
0000000000000000 RBX:
0000000000000000 RCX:
ffffa82b46d27e68
[4005007.702609] RDX:
0000000000000001 RSI:
0000000000000000 RDI:
ffff9940656e0000
[4005007.702612] RBP:
ffffa82b46d27dd8 R08:
0000000000000000 R09:
ffff994060c07980
[4005007.702615] R10:
0000000000020000 R11:
0000000000000000 R12:
00007f5e06753000
[4005007.702618] R13:
ffff9940656e0000 R14:
ffffa82b46d27e68 R15:
00007f5e06753000
[4005007.702622] FS:
00007f5e0755b740(0000) GS:
ffff99479d300000(0000) knlGS:
0000000000000000
[4005007.702626] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[4005007.702629] CR2:
ffffffffffffffd6 CR3:
00000003253fc000 CR4:
00000000003506e0
[4005007.702633] Call Trace:
[4005007.702636] <TASK>
[4005007.702640] amdgpu_debugfs_regs_smc_read+0xb0/0x120 [amdgpu]
[4005007.703002] full_proxy_read+0x5c/0x80
[4005007.703011] vfs_read+0x9f/0x1a0
[4005007.703019] ksys_read+0x67/0xe0
[4005007.703023] __x64_sys_read+0x19/0x20
[4005007.703028] do_syscall_64+0x5c/0xc0
[4005007.703034] ? do_user_addr_fault+0x1e3/0x670
[4005007.703040] ? exit_to_user_mode_prepare+0x37/0xb0
[4005007.703047] ? irqentry_exit_to_user_mode+0x9/0x20
[4005007.703052] ? irqentry_exit+0x19/0x30
[4005007.703057] ? exc_page_fault+0x89/0x160
[4005007.703062] ? asm_exc_page_fault+0x8/0x30
[4005007.703068] entry_SYSCALL_64_after_hwframe+0x44/0xae
[4005007.703075] RIP: 0033:0x7f5e07672992
[4005007.703079] Code: c0 e9 b2 fe ff ff 50 48 8d 3d fa b2 0c 00 e8 c5 1d 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 e c 28 48 89 54 24
[4005007.703083] RSP: 002b:
00007ffe03097898 EFLAGS:
00000246 ORIG_RAX:
0000000000000000
[4005007.703088] RAX:
ffffffffffffffda RBX:
0000000000020000 RCX:
00007f5e07672992
[4005007.703091] RDX:
0000000000020000 RSI:
00007f5e06753000 RDI:
0000000000000003
[4005007.703094] RBP:
00007f5e06753000 R08:
00007f5e06752010 R09:
00007f5e06752010
[4005007.703096] R10:
0000000000000022 R11:
0000000000000246 R12:
0000000000022000
[4005007.703099] R13:
0000000000000003 R14:
0000000000020000 R15:
0000000000020000
[4005007.703105] </TASK>
[4005007.703107] Modules linked in: nf_tables libcrc32c nfnetlink algif_hash af_alg binfmt_misc nls_ iso8859_1 ipmi_ssif ast intel_rapl_msr intel_rapl_common drm_vram_helper drm_ttm_helper amd64_edac t tm edac_mce_amd kvm_amd ccp mac_hid k10temp kvm acpi_ipmi ipmi_si rapl sch_fq_codel ipmi_devintf ipm i_msghandler msr parport_pc ppdev lp parport mtd pstore_blk efi_pstore ramoops pstore_zone reed_solo mon ip_tables x_tables autofs4 ib_uverbs ib_core amdgpu(OE) amddrm_ttm_helper(OE) amdttm(OE) iommu_v 2 amd_sched(OE) amdkcl(OE) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec rc_core drm igb ahci xhci_pci libahci i2c_piix4 i2c_algo_bit xhci_pci_renesas dca
[4005007.703184] CR2:
0000000000000000
[4005007.703188] ---[ end trace
ac65a538d240da39 ]---
[4005007.800865] RIP: 0010:0x0
[4005007.800871] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
[4005007.800874] RSP: 0018:
ffffa82b46d27da0 EFLAGS:
00010206
[4005007.800878] RAX:
0000000000000000 RBX:
0000000000000000 RCX:
ffffa82b46d27e68
[4005007.800881] RDX:
0000000000000001 RSI:
0000000000000000 RDI:
ffff9940656e0000
[4005007.800883] RBP:
ffffa82b46d27dd8 R08:
0000000000000000 R09:
ffff994060c07980
[4005007.800886] R10:
0000000000020000 R11:
0000000000000000 R12:
00007f5e06753000
[4005007.800888] R13:
ffff9940656e0000 R14:
ffffa82b46d27e68 R15:
00007f5e06753000
[4005007.800891] FS:
00007f5e0755b740(0000) GS:
ffff99479d300000(0000) knlGS:
0000000000000000
[4005007.800895] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[4005007.800898] CR2:
ffffffffffffffd6 CR3:
00000003253fc000 CR4:
00000000003506e0
Signed-off-by: Qu Huang <qu.huang@linux.dev>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jesse Zhang [Fri, 20 Oct 2023 01:43:51 +0000 (09:43 +0800)]
drm/amdkfd: Fix shift out-of-bounds issue
[ Upstream commit
282c1d793076c2edac6c3db51b7e8ed2b41d60a5 ]
[ 567.613292] shift exponent 255 is too large for 64-bit type 'long unsigned int'
[ 567.614498] CPU: 5 PID: 238 Comm: kworker/5:1 Tainted: G OE 6.2.0-34-generic #34~22.04.1-Ubuntu
[ 567.614502] Hardware name: AMD Splinter/Splinter-RPL, BIOS WS43927N_871 09/25/2023
[ 567.614504] Workqueue: events send_exception_work_handler [amdgpu]
[ 567.614748] Call Trace:
[ 567.614750] <TASK>
[ 567.614753] dump_stack_lvl+0x48/0x70
[ 567.614761] dump_stack+0x10/0x20
[ 567.614763] __ubsan_handle_shift_out_of_bounds+0x156/0x310
[ 567.614769] ? srso_alias_return_thunk+0x5/0x7f
[ 567.614773] ? update_sd_lb_stats.constprop.0+0xf2/0x3c0
[ 567.614780] svm_range_split_by_granularity.cold+0x2b/0x34 [amdgpu]
[ 567.615047] ? srso_alias_return_thunk+0x5/0x7f
[ 567.615052] svm_migrate_to_ram+0x185/0x4d0 [amdgpu]
[ 567.615286] do_swap_page+0x7b6/0xa30
[ 567.615291] ? srso_alias_return_thunk+0x5/0x7f
[ 567.615294] ? __free_pages+0x119/0x130
[ 567.615299] handle_pte_fault+0x227/0x280
[ 567.615303] __handle_mm_fault+0x3c0/0x720
[ 567.615311] handle_mm_fault+0x119/0x330
[ 567.615314] ? lock_mm_and_find_vma+0x44/0x250
[ 567.615318] do_user_addr_fault+0x1a9/0x640
[ 567.615323] exc_page_fault+0x81/0x1b0
[ 567.615328] asm_exc_page_fault+0x27/0x30
[ 567.615332] RIP: 0010:__get_user_8+0x1c/0x30
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Suggested-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ondrej Jirman [Sat, 11 Feb 2023 17:17:48 +0000 (18:17 +0100)]
drm/panel: st7703: Pick different reset sequence
[ Upstream commit
d12d635bb03c7cb4830acb641eb176ee9ff2aa89 ]
Switching to a different reset sequence, enabling IOVCC before enabling
VCC.
There also needs to be a delay after enabling the supplies and before
deasserting the reset. The datasheet specifies 1ms after the supplies
reach the required voltage. Use 10-20ms to also give the power supplies
some time to reach the required voltage, too.
This fixes intermittent panel initialization failures and screen
corruption during resume from sleep on panel xingbangda,xbd599 (e.g.
used in PinePhone).
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Reported-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230211171748.36692-2-frank@oltmanns.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ma Ke [Fri, 13 Oct 2023 01:53:43 +0000 (09:53 +0800)]
drm/amdgpu/vkms: fix a possible null pointer dereference
[ Upstream commit
cd90511557fdfb394bb4ac4c3b539b007383914c ]
In amdgpu_vkms_conn_get_modes(), the return value of drm_cvt_mode()
is assigned to mode, which will lead to a NULL pointer dereference
on failure of drm_cvt_mode(). Add a check to avoid null pointer
dereference.
Signed-off-by: Ma Ke <make_ruc2021@163.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ma Ke [Wed, 11 Oct 2023 01:21:43 +0000 (09:21 +0800)]
drm/radeon: fix a possible null pointer dereference
[ Upstream commit
2c1fe3c480f9e1deefd50d4b18be4a046011ee1f ]
In radeon_tv_get_modes(), the return value of drm_cvt_mode()
is assigned to mode, which will lead to a NULL pointer
dereference on failure of drm_cvt_mode(). Add a check to
avoid null point dereference.
Signed-off-by: Ma Ke <make_ruc2021@163.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ma Ke [Mon, 9 Oct 2023 09:04:46 +0000 (17:04 +0800)]
drm/panel/panel-tpo-tpg110: fix a possible null pointer dereference
[ Upstream commit
f22def5970c423ea7f87d5247bd0ef91416b0658 ]
In tpg110_get_modes(), the return value of drm_mode_duplicate() is
assigned to mode, which will lead to a NULL pointer dereference on
failure of drm_mode_duplicate(). Add a check to avoid npd.
Signed-off-by: Ma Ke <make_ruc2021@163.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231009090446.4043798-1-make_ruc2021@163.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231009090446.4043798-1-make_ruc2021@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ma Ke [Sat, 7 Oct 2023 03:31:05 +0000 (11:31 +0800)]
drm/panel: fix a possible null pointer dereference
[ Upstream commit
924e5814d1f84e6fa5cb19c6eceb69f066225229 ]
In versatile_panel_get_modes(), the return value of drm_mode_duplicate()
is assigned to mode, which will lead to a NULL pointer dereference
on failure of drm_mode_duplicate(). Add a check to avoid npd.
Signed-off-by: Ma Ke <make_ruc2021@163.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231007033105.3997998-1-make_ruc2021@163.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231007033105.3997998-1-make_ruc2021@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stanley.Yang [Wed, 27 Sep 2023 08:22:29 +0000 (16:22 +0800)]
drm/amdgpu: Fix potential null pointer derefernce
[ Upstream commit
80285ae1ec8717b597b20de38866c29d84d321a1 ]
The amdgpu_ras_get_context may return NULL if device
not support ras feature, so add check before using.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mario Limonciello [Wed, 4 Oct 2023 20:46:44 +0000 (15:46 -0500)]
drm/amd: Fix UBSAN array-index-out-of-bounds for Polaris and Tonga
[ Upstream commit
0f0e59075b5c22f1e871fbd508d6e4f495048356 ]
For pptable structs that use flexible array sizes, use flexible arrays.
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2036742
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mario Limonciello [Wed, 4 Oct 2023 20:22:52 +0000 (15:22 -0500)]
drm/amd: Fix UBSAN array-index-out-of-bounds for SMU7
[ Upstream commit
760efbca74a405dc439a013a5efaa9fadc95a8c3 ]
For pptable structs that use flexible array sizes, use flexible arrays.
Suggested-by: Felix Held <felix.held@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2874
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jani Nikula [Fri, 1 Sep 2023 14:20:34 +0000 (17:20 +0300)]
drm/msm/dp: skip validity check for DP CTS EDID checksum
[ Upstream commit
a251c9d8e30833b260101edb9383b176ee2b7cb1 ]
The DP CTS test for EDID last block checksum expects the checksum for
the last block, invalid or not. Skip the validity check.
For the most part (*), the EDIDs returned by drm_get_edid() will be
valid anyway, and there's the CTS workaround to get the checksum for
completely invalid EDIDs. See commit
7948fe12d47a ("drm/msm/dp: return
correct edid checksum after corrupted edid checksum read").
This lets us remove one user of drm_edid_block_valid() with hopes the
function can be removed altogether in the future.
(*) drm_get_edid() ignores checksum errors on CTA extensions.
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Kuogee Hsieh <khsieh@codeaurora.org>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/555361/
Link: https://lore.kernel.org/r/20230901142034.580802-1-jani.nikula@intel.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Philipp Stanner [Wed, 20 Sep 2023 12:36:13 +0000 (14:36 +0200)]
drm: vmwgfx_surface.c: copy user-array safely
[ Upstream commit
06ab64a0d836ac430c5f94669710a78aa43942cb ]
Currently, there is no overflow-check with memdup_user().
Use the new function memdup_array_user() instead of memdup_user() for
duplicating the user-space array safely.
Suggested-by: David Airlie <airlied@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230920123612.16914-7-pstanner@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Philipp Stanner [Wed, 20 Sep 2023 12:36:12 +0000 (14:36 +0200)]
drm_lease.c: copy user-array safely
[ Upstream commit
f37d63e219c39199a59b8b8a211412ff27192830 ]
Currently, there is no overflow-check with memdup_user().
Use the new function memdup_array_user() instead of memdup_user() for
duplicating the user-space array safely.
Suggested-by: David Airlie <airlied@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230920123612.16914-6-pstanner@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Philipp Stanner [Wed, 20 Sep 2023 12:36:11 +0000 (14:36 +0200)]
kernel: watch_queue: copy user-array safely
[ Upstream commit
ca0776571d3163bd03b3e8c9e3da936abfaecbf6 ]
Currently, there is no overflow-check with memdup_user().
Use the new function memdup_array_user() instead of memdup_user() for
duplicating the user-space array safely.
Suggested-by: David Airlie <airlied@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230920123612.16914-5-pstanner@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Philipp Stanner [Wed, 20 Sep 2023 12:36:10 +0000 (14:36 +0200)]
kernel: kexec: copy user-array safely
[ Upstream commit
569c8d82f95eb5993c84fb61a649a9c4ddd208b3 ]
Currently, there is no overflow-check with memdup_user().
Use the new function memdup_array_user() instead of memdup_user() for
duplicating the user-space array safely.
Suggested-by: David Airlie <airlied@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230920123612.16914-4-pstanner@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Philipp Stanner [Wed, 20 Sep 2023 12:36:09 +0000 (14:36 +0200)]
string.h: add array-wrappers for (v)memdup_user()
[ Upstream commit
313ebe47d75558511aa1237b6e35c663b5c0ec6f ]
Currently, user array duplications are sometimes done without an
overflow check. Sometimes the checks are done manually; sometimes the
array size is calculated with array_size() and sometimes by calculating
n * size directly in code.
Introduce wrappers for arrays for memdup_user() and vmemdup_user() to
provide a standardized and safe way for duplicating user arrays.
This is both for new code as well as replacing usage of (v)memdup_user()
in existing code that uses, e.g., n * size to calculate array sizes.
Suggested-by: David Airlie <airlied@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230920123612.16914-3-pstanner@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wenjing Liu [Thu, 21 Sep 2023 18:43:21 +0000 (14:43 -0400)]
drm/amd/display: use full update for clip size increase of large plane source
[ Upstream commit
05b78277ef0efc1deebc8a22384fffec29a3676e ]
[why]
Clip size increase will increase viewport, which could cause us to
switch to MPC combine.
If we skip full update, we are not able to change to MPC combine in
fast update. This will cause corruption showing on the video plane.
[how]
treat clip size increase of a surface larger than 5k as a full update.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mario Limonciello [Sat, 30 Sep 2023 03:12:18 +0000 (22:12 -0500)]
drm/amd: Update `update_pcie_parameters` functions to use uint8_t arguments
[ Upstream commit
7752ccf85b929a22e658ec145283e8f31232f4bb ]
The matching values for `pcie_gen_cap` and `pcie_width_cap` when
fetched from powerplay tables are 1 byte, so narrow the arguments
to match to ensure min() and max() comparisons without casts.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xiaogang Chen [Wed, 27 Sep 2023 16:20:28 +0000 (11:20 -0500)]
drm/amdkfd: Fix a race condition of vram buffer unref in svm code
[ Upstream commit
709c348261618da7ed89d6c303e2ceb9e453ba74 ]
prange->svm_bo unref can happen in both mmu callback and a callback after
migrate to system ram. Both are async call in different tasks. Sync svm_bo
unref operation to avoid random "use-after-free".
Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Tested-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David (Ming Qiang) Wu [Thu, 14 Sep 2023 20:34:08 +0000 (16:34 -0400)]
drm/amdgpu: not to save bo in the case of RAS err_event_athub
[ Upstream commit
fa1f1cc09d588a90c8ce3f507c47df257461d148 ]
err_event_athub will corrupt VCPU buffer and not good to
be restored in amdgpu_vcn_resume() and in this case
the VCPU buffer needs to be cleared for VCN firmware to
work properly.
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
baozhu.liu [Fri, 4 Aug 2023 02:05:53 +0000 (10:05 +0800)]
drm/komeda: drop all currently held locks if deadlock happens
[ Upstream commit
19ecbe8325a2a7ffda5ff4790955b84eaccba49f ]
If komeda_pipeline_unbound_components() returns -EDEADLK,
it means that a deadlock happened in the locking context.
Currently, komeda is not dealing with the deadlock properly,producing the
following output when CONFIG_DEBUG_WW_MUTEX_SLOWPATH is enabled:
------------[ cut here ]------------
[ 26.103984] WARNING: CPU: 2 PID: 345 at drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c:1248
komeda_release_unclaimed_resources+0x13c/0x170
[ 26.117453] Modules linked in:
[ 26.120511] CPU: 2 PID: 345 Comm: composer@2.1-se Kdump: loaded Tainted: G W 5.10.110-SE-SDK1.8-dirty #16
[ 26.131374] Hardware name: Siengine Se1000 Evaluation board (DT)
[ 26.137379] pstate:
20400009 (nzCv daif +PAN -UAO -TCO BTYPE=--)
[ 26.143385] pc : komeda_release_unclaimed_resources+0x13c/0x170
[ 26.149301] lr : komeda_release_unclaimed_resources+0xbc/0x170
[ 26.155130] sp :
ffff800017b8b8d0
[ 26.158442] pmr_save:
000000e0
[ 26.161493] x29:
ffff800017b8b8d0 x28:
ffff000cf2f96200
[ 26.166805] x27:
ffff000c8f5a8800 x26:
0000000000000000
[ 26.172116] x25:
0000000000000038 x24:
ffff8000116a0140
[ 26.177428] x23:
0000000000000038 x22:
ffff000cf2f96200
[ 26.182739] x21:
ffff000cfc300300 x20:
ffff000c8ab77080
[ 26.188051] x19:
0000000000000003 x18:
0000000000000000
[ 26.193362] x17:
0000000000000000 x16:
0000000000000000
[ 26.198672] x15:
b400e638f738ba38 x14:
0000000000000000
[ 26.203983] x13:
0000000106400a00 x12:
0000000000000000
[ 26.209294] x11:
0000000000000000 x10:
0000000000000000
[ 26.214604] x9 :
ffff800012f80000 x8 :
ffff000ca3308000
[ 26.219915] x7 :
0000000ff3000000 x6 :
ffff80001084034c
[ 26.225226] x5 :
ffff800017b8bc40 x4 :
000000000000000f
[ 26.230536] x3 :
ffff000ca3308000 x2 :
0000000000000000
[ 26.235847] x1 :
0000000000000000 x0 :
ffffffffffffffdd
[ 26.241158] Call trace:
[ 26.243604] komeda_release_unclaimed_resources+0x13c/0x170
[ 26.249175] komeda_crtc_atomic_check+0x68/0xf0
[ 26.253706] drm_atomic_helper_check_planes+0x138/0x1f4
[ 26.258929] komeda_kms_check+0x284/0x36c
[ 26.262939] drm_atomic_check_only+0x40c/0x714
[ 26.267381] drm_atomic_nonblocking_commit+0x1c/0x60
[ 26.272344] drm_mode_atomic_ioctl+0xa3c/0xb8c
[ 26.276787] drm_ioctl_kernel+0xc4/0x120
[ 26.280708] drm_ioctl+0x268/0x534
[ 26.284109] __arm64_sys_ioctl+0xa8/0xf0
[ 26.288030] el0_svc_common.constprop.0+0x80/0x240
[ 26.292817] do_el0_svc+0x24/0x90
[ 26.296132] el0_svc+0x20/0x30
[ 26.299185] el0_sync_handler+0xe8/0xf0
[ 26.303018] el0_sync+0x1a4/0x1c0
[ 26.306330] irq event stamp: 0
[ 26.309384] hardirqs last enabled at (0): [<
0000000000000000>] 0x0
[ 26.315650] hardirqs last disabled at (0): [<
ffff800010056d34>] copy_process+0x5d0/0x183c
[ 26.323825] softirqs last enabled at (0): [<
ffff800010056d34>] copy_process+0x5d0/0x183c
[ 26.331997] softirqs last disabled at (0): [<
0000000000000000>] 0x0
[ 26.338261] ---[ end trace
20ae984fa860184a ]---
[ 26.343021] ------------[ cut here ]------------
[ 26.347646] WARNING: CPU: 3 PID: 345 at drivers/gpu/drm/drm_modeset_lock.c:228 drm_modeset_drop_locks+0x84/0x90
[ 26.357727] Modules linked in:
[ 26.360783] CPU: 3 PID: 345 Comm: composer@2.1-se Kdump: loaded Tainted: G W 5.10.110-SE-SDK1.8-dirty #16
[ 26.371645] Hardware name: Siengine Se1000 Evaluation board (DT)
[ 26.377647] pstate:
20400009 (nzCv daif +PAN -UAO -TCO BTYPE=--)
[ 26.383649] pc : drm_modeset_drop_locks+0x84/0x90
[ 26.388351] lr : drm_mode_atomic_ioctl+0x860/0xb8c
[ 26.393137] sp :
ffff800017b8bb10
[ 26.396447] pmr_save:
000000e0
[ 26.399497] x29:
ffff800017b8bb10 x28:
0000000000000001
[ 26.404807] x27:
0000000000000038 x26:
0000000000000002
[ 26.410115] x25:
ffff000cecbefa00 x24:
ffff000cf2f96200
[ 26.415423] x23:
0000000000000001 x22:
0000000000000018
[ 26.420731] x21:
0000000000000001 x20:
ffff800017b8bc10
[ 26.426039] x19:
0000000000000000 x18:
0000000000000000
[ 26.431347] x17:
0000000002e8bf2c x16:
0000000002e94c6b
[ 26.436655] x15:
0000000002ea48b9 x14:
ffff8000121f0300
[ 26.441963] x13:
0000000002ee2ca8 x12:
ffff80001129cae0
[ 26.447272] x11:
ffff800012435000 x10:
ffff000ed46b5e88
[ 26.452580] x9 :
ffff000c9935e600 x8 :
0000000000000000
[ 26.457888] x7 :
000000008020001e x6 :
000000008020001f
[ 26.463196] x5 :
ffff80001085fbe0 x4 :
fffffe0033a59f20
[ 26.468504] x3 :
000000008020001e x2 :
0000000000000000
[ 26.473813] x1 :
0000000000000000 x0 :
ffff000c8f596090
[ 26.479122] Call trace:
[ 26.481566] drm_modeset_drop_locks+0x84/0x90
[ 26.485918] drm_mode_atomic_ioctl+0x860/0xb8c
[ 26.490359] drm_ioctl_kernel+0xc4/0x120
[ 26.494278] drm_ioctl+0x268/0x534
[ 26.497677] __arm64_sys_ioctl+0xa8/0xf0
[ 26.501598] el0_svc_common.constprop.0+0x80/0x240
[ 26.506384] do_el0_svc+0x24/0x90
[ 26.509697] el0_svc+0x20/0x30
[ 26.512748] el0_sync_handler+0xe8/0xf0
[ 26.516580] el0_sync+0x1a4/0x1c0
[ 26.519891] irq event stamp: 0
[ 26.522943] hardirqs last enabled at (0): [<
0000000000000000>] 0x0
[ 26.529207] hardirqs last disabled at (0): [<
ffff800010056d34>] copy_process+0x5d0/0x183c
[ 26.537379] softirqs last enabled at (0): [<
ffff800010056d34>] copy_process+0x5d0/0x183c
[ 26.545550] softirqs last disabled at (0): [<
0000000000000000>] 0x0
[ 26.551812] ---[ end trace
20ae984fa860184b ]---
According to the call trace information,it can be located to be
WARN_ON(IS_ERR(c_st)) in the komeda_pipeline_unbound_components function;
Then follow the function.
komeda_pipeline_unbound_components
-> komeda_component_get_state_and_set_user
-> komeda_pipeline_get_state_and_set_crtc
-> komeda_pipeline_get_state
->drm_atomic_get_private_obj_state
-> drm_atomic_get_private_obj_state
-> drm_modeset_lock
komeda_pipeline_unbound_components
-> komeda_component_get_state_and_set_user
-> komeda_component_get_state
-> drm_atomic_get_private_obj_state
-> drm_modeset_lock
ret = drm_modeset_lock(&obj->lock, state->acquire_ctx); if (ret)
return ERR_PTR(ret);
Here it return -EDEADLK.
deal with the deadlock as suggested by [1], using the
function drm_modeset_backoff().
[1] https://docs.kernel.org/gpu/drm-kms.html?highlight=kms#kms-locking
Therefore, handling this problem can be solved
by adding return -EDEADLK back to the drm_modeset_backoff processing flow
in the drm_mode_atomic_ioctl function.
Signed-off-by: baozhu.liu <lucas.liu@siengine.com>
Signed-off-by: menghui.huang <menghui.huang@siengine.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804013117.6870-1-menghui.huang@siengine.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sui Jingfeng [Thu, 27 Jul 2023 18:58:55 +0000 (02:58 +0800)]
drm/gma500: Fix call trace when psb_gem_mm_init() fails
[ Upstream commit
da596080b2b400c50fe9f8f237bcaf09fed06af8 ]
Because the gma_irq_install() is call after psb_gem_mm_init() function,
when psb_gem_mm_init() fails, the interrupt line haven't been allocated.
Yet the gma_irq_uninstall() is called in the psb_driver_unload() function
without checking if checking the irq is registered or not.
The calltrace is appended as following:
[ 20.539253] ioremap memtype_reserve failed -16
[ 20.543895] gma500 0000:00:02.0: Failure to map stolen base.
[ 20.565049] ------------[ cut here ]------------
[ 20.565066] Trying to free already-free IRQ 16
[ 20.565087] WARNING: CPU: 1 PID: 381 at kernel/irq/manage.c:1893 free_irq+0x209/0x370
[ 20.565316] CPU: 1 PID: 381 Comm: systemd-udevd Tainted: G C 6.5.0-rc1+ #368
[ 20.565329] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./IMB-140D Plus, BIOS P1.10 11/18/2013
[ 20.565338] RIP: 0010:free_irq+0x209/0x370
[ 20.565357] Code: 41 5d 41 5e 41 5f 5d 31 d2 89 d1 89 d6 89 d7 41 89 d1 c3 cc cc cc cc 8b 75 d0 48 c7 c7 e0 77 12 9f 4c 89 4d c8 e8 57 fe f4 ff <0f> 0b 48 8b 75 c8 4c 89 f7 e8 29 f3 f1 00 49 8b 47 40 48 8b 40 78
[ 20.565369] RSP: 0018:
ffffae3b40733808 EFLAGS:
00010046
[ 20.565382] RAX:
0000000000000000 RBX:
ffff9f8082bfe000 RCX:
0000000000000000
[ 20.565390] RDX:
0000000000000000 RSI:
0000000000000000 RDI:
0000000000000000
[ 20.565397] RBP:
ffffae3b40733840 R08:
0000000000000000 R09:
0000000000000000
[ 20.565405] R10:
0000000000000000 R11:
0000000000000000 R12:
ffff9f80871c3100
[ 20.565413] R13:
ffff9f80835d3360 R14:
ffff9f80835d32a4 R15:
ffff9f80835d3200
[ 20.565424] FS:
00007f13d36458c0(0000) GS:
ffff9f8138880000(0000) knlGS:
0000000000000000
[ 20.565434] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 20.565441] CR2:
00007f0d046f3f20 CR3:
0000000006c8c000 CR4:
00000000000006e0
[ 20.565450] Call Trace:
[ 20.565458] <TASK>
[ 20.565470] ? show_regs+0x72/0x90
[ 20.565488] ? free_irq+0x209/0x370
[ 20.565504] ? __warn+0x8d/0x160
[ 20.565520] ? free_irq+0x209/0x370
[ 20.565536] ? report_bug+0x1bb/0x1d0
[ 20.565555] ? handle_bug+0x46/0x90
[ 20.565572] ? exc_invalid_op+0x19/0x80
[ 20.565587] ? asm_exc_invalid_op+0x1b/0x20
[ 20.565607] ? free_irq+0x209/0x370
[ 20.565625] ? free_irq+0x209/0x370
[ 20.565644] gma_irq_uninstall+0x15b/0x1e0 [gma500_gfx]
[ 20.565728] psb_driver_unload+0x27/0x190 [gma500_gfx]
[ 20.565800] psb_pci_probe+0x5d2/0x790 [gma500_gfx]
[ 20.565873] local_pci_probe+0x48/0xb0
[ 20.565892] pci_device_probe+0xc8/0x280
[ 20.565912] really_probe+0x1d2/0x440
[ 20.565929] __driver_probe_device+0x8a/0x190
[ 20.565944] driver_probe_device+0x23/0xd0
[ 20.565957] __driver_attach+0x10f/0x220
[ 20.565971] ? __pfx___driver_attach+0x10/0x10
[ 20.565984] bus_for_each_dev+0x7a/0xe0
[ 20.566002] driver_attach+0x1e/0x30
[ 20.566014] bus_add_driver+0x127/0x240
[ 20.566029] driver_register+0x64/0x140
[ 20.566043] ? __pfx_psb_init+0x10/0x10 [gma500_gfx]
[ 20.566111] __pci_register_driver+0x68/0x80
[ 20.566128] psb_init+0x2c/0xff0 [gma500_gfx]
[ 20.566194] do_one_initcall+0x46/0x330
[ 20.566214] ? kmalloc_trace+0x2a/0xb0
[ 20.566233] do_init_module+0x6a/0x270
[ 20.566250] load_module+0x207f/0x23a0
[ 20.566278] init_module_from_file+0x9c/0xf0
[ 20.566293] ? init_module_from_file+0x9c/0xf0
[ 20.566315] idempotent_init_module+0x184/0x240
[ 20.566335] __x64_sys_finit_module+0x64/0xd0
[ 20.566352] do_syscall_64+0x59/0x90
[ 20.566366] ? ksys_mmap_pgoff+0x123/0x270
[ 20.566378] ? __secure_computing+0x9b/0x110
[ 20.566392] ? exit_to_user_mode_prepare+0x39/0x190
[ 20.566406] ? syscall_exit_to_user_mode+0x2a/0x50
[ 20.566420] ? do_syscall_64+0x69/0x90
[ 20.566433] ? do_syscall_64+0x69/0x90
[ 20.566445] ? do_syscall_64+0x69/0x90
[ 20.566458] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ 20.566472] RIP: 0033:0x7f13d351ea3d
[ 20.566485] Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d c3 a3 0f 00 f7 d8 64 89 01 48
[ 20.566496] RSP: 002b:
00007ffe566c1fd8 EFLAGS:
00000246 ORIG_RAX:
0000000000000139
[ 20.566510] RAX:
ffffffffffffffda RBX:
000055e66806eec0 RCX:
00007f13d351ea3d
[ 20.566519] RDX:
0000000000000000 RSI:
00007f13d36d9441 RDI:
0000000000000010
[ 20.566527] RBP:
0000000000020000 R08:
0000000000000000 R09:
0000000000000002
[ 20.566535] R10:
0000000000000010 R11:
0000000000000246 R12:
00007f13d36d9441
[ 20.566543] R13:
000055e6681108c0 R14:
000055e66805ba70 R15:
000055e66819a9c0
[ 20.566559] </TASK>
[ 20.566566] ---[ end trace
0000000000000000 ]---
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727185855.713318-1-suijingfeng@loongson.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
Olli Asikainen [Tue, 24 Oct 2023 19:09:21 +0000 (22:09 +0300)]
platform/x86: thinkpad_acpi: Add battery quirk for Thinkpad X120e
[ Upstream commit
916646758aea81a143ce89103910f715ed923346 ]
Thinkpad X120e also needs this battery quirk.
Signed-off-by: Olli Asikainen <olli.asikainen@gmail.com>
Link: https://lore.kernel.org/r/20231024190922.2742-1-olli.asikainen@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tzung-Bi Shih [Tue, 3 Oct 2023 08:05:04 +0000 (08:05 +0000)]
platform/chrome: kunit: initialize lock for fake ec_dev
[ Upstream commit
e410b4ade83d06a046f6e32b5085997502ba0559 ]
cros_ec_cmd_xfer() uses ec_dev->lock. Initialize it.
Otherwise, dmesg shows the following:
> DEBUG_LOCKS_WARN_ON(lock->magic != lock)
> ...
> Call Trace:
> ? __mutex_lock
> ? __warn
> ? __mutex_lock
> ...
> ? cros_ec_cmd_xfer
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20231003080504.4011337-1-tzungbi@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gerhard Engleder [Mon, 23 Oct 2023 18:38:56 +0000 (20:38 +0200)]
tsnep: Fix tsnep_request_irq() format-overflow warning
[ Upstream commit
00e984cb986b31e9313745e51daceaa1e1eb7351 ]
Compiler warns about a possible format-overflow in tsnep_request_irq():
drivers/net/ethernet/engleder/tsnep_main.c:884:55: warning: 'sprintf' may write a terminating nul past the end of the destination [-Wformat-overflow=]
sprintf(queue->name, "%s-rx-%d", name,
^
drivers/net/ethernet/engleder/tsnep_main.c:881:55: warning: 'sprintf' may write a terminating nul past the end of the destination [-Wformat-overflow=]
sprintf(queue->name, "%s-tx-%d", name,
^
drivers/net/ethernet/engleder/tsnep_main.c:878:49: warning: '-txrx-' directive writing 6 bytes into a region of size between 5 and 25 [-Wformat-overflow=]
sprintf(queue->name, "%s-txrx-%d", name,
^~~~~~
Actually overflow cannot happen. Name is limited to IFNAMSIZ, because
netdev_name() is called during ndo_open(). queue_index is single char,
because less than 10 queues are supported.
Fix warning with snprintf(). Additionally increase buffer to 32 bytes,
because those 7 additional bytes were unused anyway.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/
202310182028.vmDthIUa-lkp@intel.com/
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231023183856.58373-1-gerhard@engleder-embedded.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jonathan Denose [Tue, 24 Oct 2023 14:13:36 +0000 (09:13 -0500)]
ACPI: EC: Add quirk for HP 250 G7 Notebook PC
[ Upstream commit
891ddc03e2f4395e24795596e032f57d5ab37fe7 ]
Add GPE quirk entry for HP 250 G7 Notebook PC.
This change allows the lid switch to be identified as the lid switch
and not a keyboard button. With the lid switch properly identified, the
device triggers suspend correctly on lid close.
Signed-off-by: Jonathan Denose <jdenose@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ZhengHan Wang [Wed, 18 Oct 2023 10:30:55 +0000 (12:30 +0200)]
Bluetooth: Fix double free in hci_conn_cleanup
[ Upstream commit
a85fb91e3d728bdfc80833167e8162cce8bc7004 ]
syzbot reports a slab use-after-free in hci_conn_hash_flush [1].
After releasing an object using hci_conn_del_sysfs in the
hci_conn_cleanup function, releasing the same object again
using the hci_dev_put and hci_conn_put functions causes a double free.
Here's a simplified flow:
hci_conn_del_sysfs:
hci_dev_put
put_device
kobject_put
kref_put
kobject_release
kobject_cleanup
kfree_const
kfree(name)
hci_dev_put:
...
kfree(name)
hci_conn_put:
put_device
...
kfree(name)
This patch drop the hci_dev_put and hci_conn_put function
call in hci_conn_cleanup function, because the object is
freed in hci_conn_del_sysfs function.
This patch also fixes the refcounting in hci_conn_add_sysfs() and
hci_conn_del_sysfs() to take into account device_add() failures.
This fixes CVE-2023-28464.
Link: https://syzkaller.appspot.com/bug?id=1bb51491ca5df96a5f724899d1dbb87afda61419
Signed-off-by: ZhengHan Wang <wzhmmmmm@gmail.com>
Co-developed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
youwan Wang [Wed, 11 Oct 2023 05:14:47 +0000 (13:14 +0800)]
Bluetooth: btusb: Add date->evt_skb is NULL check
[ Upstream commit
624820f7c8826dd010e8b1963303c145f99816e9 ]
fix crash because of null pointers
[ 6104.969662] BUG: kernel NULL pointer dereference, address:
00000000000000c8
[ 6104.969667] #PF: supervisor read access in kernel mode
[ 6104.969668] #PF: error_code(0x0000) - not-present page
[ 6104.969670] PGD 0 P4D 0
[ 6104.969673] Oops: 0000 [#1] SMP NOPTI
[ 6104.969684] RIP: 0010:btusb_mtk_hci_wmt_sync+0x144/0x220 [btusb]
[ 6104.969688] RSP: 0018:
ffffb8d681533d48 EFLAGS:
00010246
[ 6104.969689] RAX:
0000000000000000 RBX:
ffff8ad560bb2000 RCX:
0000000000000006
[ 6104.969691] RDX:
0000000000000000 RSI:
ffffb8d681533d08 RDI:
0000000000000000
[ 6104.969692] RBP:
ffffb8d681533d70 R08:
0000000000000001 R09:
0000000000000001
[ 6104.969694] R10:
0000000000000001 R11:
00000000fa83b2da R12:
ffff8ad461d1d7c0
[ 6104.969695] R13:
0000000000000000 R14:
ffff8ad459618c18 R15:
ffffb8d681533d90
[ 6104.969697] FS:
00007f5a1cab9d40(0000) GS:
ffff8ad578200000(0000) knlGS:00000
[ 6104.969699] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 6104.969700] CR2:
00000000000000c8 CR3:
000000018620c001 CR4:
0000000000760ef0
[ 6104.969701] PKRU:
55555554
[ 6104.969702] Call Trace:
[ 6104.969708] btusb_mtk_shutdown+0x44/0x80 [btusb]
[ 6104.969732] hci_dev_do_close+0x470/0x5c0 [bluetooth]
[ 6104.969748] hci_rfkill_set_block+0x56/0xa0 [bluetooth]
[ 6104.969753] rfkill_set_block+0x92/0x160
[ 6104.969755] rfkill_fop_write+0x136/0x1e0
[ 6104.969759] __vfs_write+0x18/0x40
[ 6104.969761] vfs_write+0xdf/0x1c0
[ 6104.969763] ksys_write+0xb1/0xe0
[ 6104.969765] __x64_sys_write+0x1a/0x20
[ 6104.969769] do_syscall_64+0x51/0x180
[ 6104.969771] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 6104.969773] RIP: 0033:0x7f5a21f18fef
[ 6104.9] RSP: 002b:
00007ffeefe39010 EFLAGS:
00000293 ORIG_RAX:
0000000000000001
[ 6104.969780] RAX:
ffffffffffffffda RBX:
000055c10a7560a0 RCX:
00007f5a21f18fef
[ 6104.969781] RDX:
0000000000000008 RSI:
00007ffeefe39060 RDI:
0000000000000012
[ 6104.969782] RBP:
00007ffeefe39060 R08:
0000000000000000 R09:
0000000000000017
[ 6104.969784] R10:
00007ffeefe38d97 R11:
0000000000000293 R12:
0000000000000002
[ 6104.969785] R13:
00007ffeefe39220 R14:
00007ffeefe391a0 R15:
000055c10a72acf0
Signed-off-by: youwan Wang <wangyouwan@126.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrii Nakryiko [Wed, 11 Oct 2023 22:37:28 +0000 (15:37 -0700)]
bpf: Ensure proper register state printing for cond jumps
[ Upstream commit
1a8a315f008a58f54fecb012b928aa6a494435b3 ]
Verifier emits relevant register state involved in any given instruction
next to it after `;` to the right, if possible. Or, worst case, on the
separate line repeating instruction index.
E.g., a nice and simple case would be:
2: (d5) if r0 s<= 0x0 goto pc+1 ; R0_w=0
But if there is some intervening extra output (e.g., precision
backtracking log) involved, we are supposed to see the state after the
precision backtrack log:
4: (75) if r0 s>= 0x0 goto pc+1
mark_precise: frame0: last_idx 4 first_idx 0 subseq_idx -1
mark_precise: frame0: regs=r0 stack= before 2: (d5) if r0 s<= 0x0 goto pc+1
mark_precise: frame0: regs=r0 stack= before 1: (b7) r0 = 0
6: R0_w=0
First off, note that in `6: R0_w=0` instruction index corresponds to the
next instruction, not to the conditional jump instruction itself, which
is wrong and we'll get to that.
But besides that, the above is a happy case that does work today. Yet,
if it so happens that precision backtracking had to traverse some of the
parent states, this `6: R0_w=0` state output would be missing.
This is due to a quirk of print_verifier_state() routine, which performs
mark_verifier_state_clean(env) at the end. This marks all registers as
"non-scratched", which means that subsequent logic to print *relevant*
registers (that is, "scratched ones") fails and doesn't see anything
relevant to print and skips the output altogether.
print_verifier_state() is used both to print instruction context, but
also to print an **entire** verifier state indiscriminately, e.g.,
during precision backtracking (and in a few other situations, like
during entering or exiting subprogram). Which means if we have to print
entire parent state before getting to printing instruction context
state, instruction context is marked as clean and is omitted.
Long story short, this is definitely not intentional. So we fix this
behavior in this patch by teaching print_verifier_state() to clear
scratch state only if it was used to print instruction state, not the
parent/callback state. This is determined by print_all option, so if
it's not set, we don't clear scratch state. This fixes missing
instruction state for these cases.
As for the mismatched instruction index, we fix that by making sure we
call print_insn_state() early inside check_cond_jmp_op() before we
adjusted insn_idx based on jump branch taken logic. And with that we get
desired correct information:
9: (16) if w4 == 0x1 goto pc+9
mark_precise: frame0: last_idx 9 first_idx 9 subseq_idx -1
mark_precise: frame0: parent state regs=r4 stack=: R2_w=1944 R4_rw=P1 R10=fp0
mark_precise: frame0: last_idx 8 first_idx 0 subseq_idx 9
mark_precise: frame0: regs=r4 stack= before 8: (66) if w4 s> 0x3 goto pc+5
mark_precise: frame0: regs=r4 stack= before 7: (b7) r4 = 1
9: R4=1
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20231011223728.3188086-6-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arseniy Krasnov [Tue, 10 Oct 2023 19:15:14 +0000 (22:15 +0300)]
vsock: read from socket's error queue
[ Upstream commit
49dbe25adac42d3e06f65d1420946bec65896222 ]
This adds handling of MSG_ERRQUEUE input flag in receive call. This flag
is used to read socket's error queue instead of data queue. Possible
scenario of error queue usage is receiving completions for transmission
with MSG_ZEROCOPY flag. This patch also adds new defines: 'SOL_VSOCK'
and 'VSOCK_RECVERR'.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / platform / kernel / linux-starfive.git / log