Input: auo-pixcir-ts - switch to using generic device properties

Let's use generic device properties API instead of OF-specific one.

Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220914141428.2201784-4-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: auo-pixcir-ts - do not force rising edge interrupt trigger

Instead of hard-coding rising edge as the interrupt trigger, let's rely on
the platform (ACPI, DT) to configure the interrupt properly.

Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220914141428.2201784-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: auo-pixcir-ts - switch to using gpiod API

This switches the driver to gpiod API and drops uses of of_get_gpio() API.

Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220914141428.2201784-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: auo-pixcir-ts - drop support for platform data

Currently there are no users of auo_pixcir_ts_platdata in the mainline, and
having it (with legacy gpio numbers) prevents us from converting the driver
to gpiod API, so let's drop it.

If, in the future, someone wants to use this driver on non-device tree,
non-ACPI system, they should use static device properties instead of
platform data.

Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220914141428.2201784-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

dt-bindings: input: mediatek,pmic-keys: Add compatible for MT6331 keys

Add a compatible for the keys found on MT6331 PMIC.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20220914103021.43593-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

dt-bindings: input: Convert mtk-pmic-keys to DT schema

Convert the mtk-pmic-keys to DT schema format.

The old binding was missing documentation for key press/release
interrupts, even though it was supported in hardware and driver,
so support for the same was added during the conversion.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220914103021.43593-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: synaptics - enable InterTouch for the ThinkPad P1 G3

Noticed this while trying to debug some unrelated issues: this laptop has
the ability to use rmi4 but doesn't by default. So let's fix that.

Tested locally, including mouse buttons, on my ThinkPad P1 G3. This might
also enable the X1 Extreme G3, but I don't have such a system to test
locally (presumably Mark can chime in if that's the case).

Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20220909202127.141761-1-lyude@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: iqs7222 - set all ULP entry masks by default

Some devices expose an ultra-low-power (ULP) mode entry mask for
each channel. If the mask is set, the device cannot enter ULP so
long as the corresponding channel remains in an active state.

The vendor has advised setting the mask for any disabled channel.
To accommodate this suggestion, initially set all masks and then
clear them only if specified in the device tree.

Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20220908131548.48120-8-jeff@labundy.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: iqs7222 - avoid sending empty SYN_REPORT events

Add a check to prevent sending undefined events, which ultimately
map to SYN_REPORT.

Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20220908131548.48120-7-jeff@labundy.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: iqs7222 - trim force communication command

According to the datasheets, writing only 0xFF is sufficient to
elicit a communication window. Remove the superfluous 0x00 from
the force communication command.

Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20220908131548.48120-6-jeff@labundy.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: mtk-pmic-keys - add support for MT6331 PMIC keys

Add support for PMIC Keys of the MT6331 PMIC.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20220913123941.385349-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: hgpk - fix repeated word in a comment

Delete the redundant word 'to'.

Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
Link: https://lore.kernel.org/r/20220908131043.37099-1-wangjianli@cdjrlc.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: xpad - add support for XBOX One Elite paddles

An effort has been made to support every official model and firmware
version I could track down info on. The following controllers _should_
have working paddles with this PR:
- Xbox Elite (**untested**)
- Xbox Elite Series 2 on early firmwares (**untested**)
- Xbox Elite Series 2 on v4 firmwares (Tested v4.8.1908.0)
- Xbox Elite Series 2 on v5 pre-BLE firmwares (**untested**)
- Xbox Elite Series 2 on v5 post-BLE firmwares (Tested v5.13.3143.0)

This patch also introduces correct handling for the Elite 1 controller
and properly suppresses paddle inputs when using a custom profile slot.

Starting with firmware v5.11, certain inputs for the Elite 2 were moved
to an extra packet that is not enabled by default.

We must first manually enable this extra packet in order to correctly
process paddle input data with these later firmwares.

Signed-off-by: Christopher Crockett <chaorace@gmail.com>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Tested-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20220818154411.510308-5-rojtberg@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: xpad - Poweroff XBOX360W on mode button long press

Newer gamepads turn themselves off when the mode button is held down.
For XBOX360W gamepads we must do this in the driver.

Do not use BIT() macro for consistency within the file.

Signed-off-by: Santosh De Massari <s.demassari@gmail.com>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Link: https://lore.kernel.org/r/20220818154411.510308-4-rojtberg@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: xpad - fix wireless 360 controller breaking after suspend

Suspending and resuming the system can sometimes cause the out
URB to get hung after a reset_resume. This causes LED setting
and force feedback to break on resume. To avoid this, just drop
the reset_resume callback so the USB core rebinds xpad to the
wireless pads on resume if a reset happened.

A nice side effect of this change is the LED ring on wireless
controllers is now set correctly on system resume.

Cc: stable@vger.kernel.org
Fixes: 4220f7db1e42 ("Input: xpad - workaround dead irq_out after suspend/ resume")
Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Link: https://lore.kernel.org/r/20220818154411.510308-3-rojtberg@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: xpad - add supported devices as contributed on github

This is based on multiple commits at https://github.com/paroj/xpad

Cc: stable@vger.kernel.org
Signed-off-by: Jasper Poppe <jgpoppe@gmail.com>
Signed-off-by: Jeremy Palmer <jpalmer@linz.govt.nz>
Signed-off-by: Ruineka <ruinairas1992@gmail.com>
Signed-off-by: Cleber de Mattos Casali <clebercasali@gmail.com>
Signed-off-by: Kyle Gospodnetich <me@kylegospodneti.ch>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Link: https://lore.kernel.org/r/20220818154411.510308-2-rojtberg@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

dt-bindings: input: touchscreen: stmpe: Remove node name requirement

STMPE driver does not require a specific node name anymore, only the
compatible is checked, update binding according to this.

Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220712163345.445811-6-francesco.dolcini@toradex.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: aiptek - switch to using dev_groups for driver-specific attributes

The driver core now has the ability to handle the creation and removal
of device-specific sysfs files, let's use it instead of registering and
unregistering attributes by hand.

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220903051119.1332808-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: psmouse - switch to using dev_groups for driver-specific attributes

The driver core now has the ability to handle the creation and removal
of device-specific sysfs files, let's use it instead of registering and
unregistering attributes by hand.

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220903051119.1332808-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: atkbd - switch to using dev_groups for driver-specific attributes

The driver core now has the ability to handle the creation and removal
of device-specific sysfs files, let's use it instead of registering and
unregistering attributes by hand.

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220903051119.1332808-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: rt5120 - add power key support

Add RT5120 PMIC power key support.

Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1660100142-32493-4-git-send-email-u0084500@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

dt-bindings: input: colibri-vf50-ts: Improve documentation

Clarify properties definition, drop unused pinctrl-2 state 'gpio'.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220712101619.326120-3-francesco.dolcini@toradex.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: colibri-vf50-ts - don't depend on VF610_ADC

Any IIO ADC can be used with the driver, so do not depend
on VF610_ADC.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20220712101619.326120-2-francesco.dolcini@toradex.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: adp5588-keys - use new PM macros

With the new PM macros (DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()), the
compiler has visibility to see that the functions are not used when
!CONFIG_PM and hence, remove the dead code. As such, there's no need
for '__maybe_unused'.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220829131553.690063-11-nuno.sa@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: adp5588-keys - add regulator support

Support feeding VCC through a regulator.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220829131553.690063-10-nuno.sa@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: adp5588-keys - add optional reset gpio

Optionally reset the device during probe.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220829131553.690063-9-nuno.sa@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: adp5588-keys - fix coding style warnings

Just some code cleanup regarding coding style. With the introduction of
the bits.h macros changes in the code are indeed introduced.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220829131553.690063-8-nuno.sa@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: adp5588-keys - do not check for irq presence

There's no need for an extra check for 'client-irq'. Just let it fail when
calling 'request_irq()'.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220829131553.690063-7-nuno.sa@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

dt-bindings: input: adp5588: add bindings

Add device tree bindings for the adp5588-keys driver.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220829131553.690063-6-nuno.sa@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: adp5588-keys - add support for fw properties

Use firmware properties (eg: OF) to get the device specific
configuration. This change just replaces the platform data since there
was no platform using it and so, it makes no sense having both.

Special note to the PULL-UP disable setting that is now supported as
part of the gpio subsystem (using 'set_config()' callback).

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220829131553.690063-5-nuno.sa@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: adp5588-keys - bail out on returned error

Don't continue in code paths after some error is found. It makes no
sense to do any other device configuration if a previous one failed.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220829131553.690063-4-nuno.sa@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

gpio: gpio-adp5588: drop the driver

With commit 9d2b2e83ef27 ("Input: adp5588-keys - support gpi key events as
'gpio keys'") the irchip functionality is directly supported in the input
driver as the main goal of these pins is to be used as gpio keys. Hence,
this driver can be removed.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220829131553.690063-3-nuno.sa@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: adp5588-keys - support gpi key events as 'gpio keys'

This change replaces the support for GPIs as key event generators.
Instead of reporting the events directly, we add a gpio based irqchip
so that these events can be consumed by keys defined in the gpio-keys
driver (as it's goal is indeed for keys on GPIOs capable of generating
interrupts). With this, the gpio-adp5588 driver can also be dropped.

The basic idea is that all the pins that are not being used as part of
the keymap matrix can be possibly requested as GPIOs by gpio-keys
(it's also fine to use these pins as plain interrupts though that's not
really the point).

Since the gpiochip now also has irqchip capabilities, we should only
remove it after we free the device interrupt (otherwise we could, in
theory, be handling GPIs interrupts while the gpiochip is concurrently
removed). Thus the call 'adp5588_gpio_add()' is moved and since the
setup phase also needs to come before making the gpios visible, we also
need to move 'adp5588_setup()'.

While at it, always select GPIOLIB so that we don't need to use #ifdef
guards.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220829131553.690063-2-nuno.sa@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: matrix_keypad - replace of_gpio_named_count() by gpiod_count()

As a preparation to unexport of_gpio_named_count(), convert the
driver to use gpiod_count() instead.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220830183552.50695-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: clps711x-keypad - get rid of OF_GPIO dependency

There is no such dependency in the driver, but it's implicitly
used to have OF property APIs available. Replace that by device
property API and get rid of OF_GPIO dependency.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220830182839.47965-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: gameport - move from strlcpy with unused retval to strscpy

Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220818210156.8143-1-wsa+renesas@sang-engineering.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: move from strlcpy with unused retval to strscpy

Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220818210022.6865-1-wsa+renesas@sang-engineering.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: adc-joystick - add polled input device support

Add polled input device support to the adc-joystick driver. This is
useful for devices which do not have hardware capable triggers on
their SARADC. Code modified from adc-joystick.c changes made by Maya
Matuszczyk.

Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20220816210440.14260-3-macroalpha82@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

dt-bindings: adc-joystick: add poll-interval

Add poll-interval support for the adc-joystick documentation. This is
an optional value and if not provided the adc-joystick works as it
does today (with buffers). If this value is provided, the adc-joystick
driver is polled at the specified interval. The existing attribute of
"poll-interval" was used instead of complying with property-units.yaml
after discussion of the issue on the mailing list.

Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Artur Rojek <contact@artur-rojek.eu>
Link: https://lore.kernel.org/r/20220816210440.14260-2-macroalpha82@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: Add IBM Operation Panel driver

Add a driver to get the button events from the panel and provide
them to userspace with the input subsystem. The panel is
connected with I2C and controls the bus, so the driver registers
as an I2C slave device.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # I2C slave parts
Link: https://lore.kernel.org/r/20220809204147.238132-3-eajames@linux.ibm.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

dt-bindings: input: Add documentation for IBM Operation Panel

Document the bindings for the IBM Operation Panel, which provides
a simple interface to control a server. It has a display and three
buttons.
Also update MAINTAINERS for the new file.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220809204147.238132-2-eajames@linux.ibm.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Merge branch 'i2c/make_remove_callback_void-immutable' of git://git./linux/kernel/git/wsa/linux into next

Sync up with the latest I2C code base to get updated prototype of I2C
bus remove() method.

i2c: Make remove callback return void

The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)

So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.

Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5
Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio
Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

gpio: pca953x: Make platform teardown callback return void

All platforms that provide a teardown callback return 0. New users are
supposed to not make use of platform support, so there is no
functionality lost.

This patch is a preparation for making i2c remove callbacks return void.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

leds: lm3601x: Improve error reporting for problems during .remove()

Returning an error value in an i2c remove callback results in a generic
error message being emitted by the i2c core, but otherwise it doesn't
make a difference. The device goes away anyhow and the devm cleanups are
called.

So instead of triggering the generic i2c error message, emit a more
helpful message if a problem occurs and return 0 to suppress the generic
message.

This patch is a preparation for making i2c remove callbacks return void.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

leds: lm3601x: Don't use mutex after it was destroyed

The mutex might still be in use until the devm cleanup callback
devm_led_classdev_flash_release() is called. This only happens some time
after lm3601x_remove() completed.

Fixes: e63a744871a3 ("leds: lm3601x: Convert class registration to device managed")
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

leds: lm3697: Remove duplicated error reporting in .remove()

Returning an error value from an i2c remove callback results in an error
message being emitted by the i2c core, but otherwise it doesn't make a
difference. The device goes away anyhow and the devm cleanups are
called.

As lm3697_remove() already emits an error message on failure and the
additional error message by the i2c core doesn't add any useful
information, don't pass the error value up the stack. Instead continue
to clean up and return 0.

This patch is a preparation for making i2c remove callbacks return void.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

drm/i2c/sil164: Drop no-op remove function

A remove callback that just returns 0 is equivalent to no callback at all
as can be seen in i2c_device_remove(). So simplify accordingly.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Linux 6.0-rc1

radix-tree: replace gfp.h inclusion with gfp_types.h

Radix tree header includes gfp.h for __GFP_BITS_SHIFT only. Now we
have gfp_types.h for this.

Fixes powerpc allmodconfig build:

   In file included from include/linux/nodemask.h:97,
                    from include/linux/mmzone.h:17,
                    from include/linux/gfp.h:7,
                    from include/linux/radix-tree.h:12,
                    from include/linux/idr.h:15,
                    from include/linux/kernfs.h:12,
                    from include/linux/sysfs.h:16,
                    from include/linux/kobject.h:20,
                    from include/linux/pci.h:35,
                    from arch/powerpc/kernel/prom_init.c:24:
   include/linux/random.h: In function 'add_latent_entropy':
>> include/linux/random.h:25:46: error: 'latent_entropy' undeclared (first use in this function); did you mean 'add_latent_entropy'?
      25 |         add_device_randomness((const void *)&latent_entropy, sizeof(latent_entropy));
         |                                              ^~~~~~~~~~~~~~
         |                                              add_latent_entropy
   include/linux/random.h:25:46: note: each undeclared identifier is reported only once for each function it appears in

Reported-by: kernel test robot <lkp@intel.com>
CC: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'pull-fixes' of git://git./linux/kernel/git/viro/vfs

Pull vfs lseek fix from Al Viro:
 "Fix proc_reg_llseek() breakage. Always had been possible if somebody
  left NULL ->proc_lseek, became a practical issue now"

* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  take care to handle NULL ->proc_lseek()

take care to handle NULL ->proc_lseek()

Easily done now, just by clearing FMODE_LSEEK in ->f_mode
during proc_reg_open() for such entries.

Fixes: 868941b14441 "fs: remove no_llseek"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Merge tag 'for-linus-6.0-rc1b-tag' of git://git./linux/kernel/git/xen/tip

Pull more xen updates from Juergen Gross:

 - fix the handling of the "persistent grants" feature negotiation
   between Xen blkfront and Xen blkback drivers

 - a cleanup of xen.config and adding xen.config to Xen section in
   MAINTAINERS

 - support HVMOP_set_evtchn_upcall_vector, which is more compliant to
   "normal" interrupt handling than the global callback used up to now

 - further small cleanups

* tag 'for-linus-6.0-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  MAINTAINERS: add xen config fragments to XEN HYPERVISOR sections
  xen: remove XEN_SCRUB_PAGES in xen.config
  xen/pciback: Fix comment typo
  xen/xenbus: fix return type in xenbus_file_read()
  xen-blkfront: Apply 'feature_persistent' parameter when connect
  xen-blkback: Apply 'feature_persistent' parameter when connect
  xen-blkback: fix persistent grants negotiation
  x86/xen: Add support for HVMOP_set_evtchn_upcall_vector

Merge tag 'perf-tools-fixes-for-v6.0-2022-08-13' of git://git./linux/kernel/git/acme/linux

Pull more perf tool updates from Arnaldo Carvalho de Melo:

 - 'perf c2c' now supports ARM64, adjust its output to cope with
   differences with what is in x86_64. Now go find false sharing on
   ARM64 (at least Neoverse) as well!

 - Refactor the JSON processing, making the output more compact and thus
   reducing the size of the resulting perf binary

 - Improvements for 'perf offcpu' profiling, including tracking child
   processes

 - Update Intel JSON metrics and events files for broadwellde,
   broadwellx, cascadelakex, haswellx, icelakex, ivytown, jaketown,
   knightslanding, sapphirerapids, skylakex and snowridgex

 - Add 'perf stat' JSON output and a 'perf test' entry for it

 - Ignore memfd and anonymous mmap events if jitdump present

 - Refactor 'perf test' shell tests allowing subdirs

 - Fix an error handling path in 'parse_perf_probe_command()'

 - Fixes for the guest Intel PT tracing patchkit in the 1st batch of
   this merge window

 - Print debuginfod queries if -v option is used, to explain delays in
   processing when debuginfo servers are enabled to fetch DSOs with
   richer symbol tables

 - Improve error message for 'perf record -p not_existing_pid'

 - Fix openssl and libbpf feature detection

 - Add PMU pai_crypto event description for IBM z16 on 'perf list'

 - Fix typos and duplicated words on comments in various places

* tag 'perf-tools-fixes-for-v6.0-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (81 commits)
  perf test: Refactor shell tests allowing subdirs
  perf vendor events: Update events for snowridgex
  perf vendor events: Update events and metrics for skylakex
  perf vendor events: Update metrics for sapphirerapids
  perf vendor events: Update events for knightslanding
  perf vendor events: Update metrics for jaketown
  perf vendor events: Update metrics for ivytown
  perf vendor events: Update events and metrics for icelakex
  perf vendor events: Update events and metrics for haswellx
  perf vendor events: Update events and metrics for cascadelakex
  perf vendor events: Update events and metrics for broadwellx
  perf vendor events: Update metrics for broadwellde
  perf jevents: Fold strings optimization
  perf jevents: Compress the pmu_events_table
  perf metrics: Copy entire pmu_event in find metric
  perf pmu-events: Hide the pmu_events
  perf pmu-events: Don't assume pmu_event is an array
  perf pmu-events: Move test events/metrics to JSON
  perf test: Use full metric resolution
  perf pmu-events: Hide pmu_events_map
  ...

Merge tag 'powerpc-6.0-2' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

 - Ensure we never emit lwarx with EH=1 on 32-bit, because some 32-bit
   CPUs trap on it rather than ignoring it as they should.

 - Fix ftrace when building with clang, which was broken by some
   refactoring.

 - A couple of other minor fixes.

Thanks to Christophe Leroy, Naveen N.  Rao, Nick Desaulniers, Ondrej
Mosnacek, Pali Rohár, Russell Currey, and Segher Boessenkool.

* tag 'powerpc-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/kexec: Fix build failure from uninitialised variable
  powerpc/ppc-opcode: Fix PPC_RAW_TW()
  powerpc64/ftrace: Fix ftrace for clang builds
  powerpc: Make eh value more explicit when using lwarx
  powerpc: Don't hide eh field of lwarx behind a macro
  powerpc: Fix eh field when calling lwarx on PPC32

Merge tag 'pull-work.misc' of git://git./linux/kernel/git/viro/vfs

Pull /proc/mounts fix from Al Viro:
 "Fix for /proc/mounts escaping - escape the '#' character too"

* tag 'pull-work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  vfs: escape hash as well

Merge tag '5.20-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6

Pull more cifs updates from Steve French:

 - two fixes for stable, one for a lock length miscalculation, and
   another fixes a lease break timeout bug

 - improvement to handle leases, allows the close timeout to be
   configured more safely

 - five restructuring/cleanup patches

* tag '5.20-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Do not access tcon->cfids->cfid directly from is_path_accessible
  cifs: Add constructor/destructors for tcon->cfid
  SMB3: fix lease break timeout when multiple deferred close handles for the same file.
  smb3: allow deferred close timeout to be configurable
  cifs: Do not use tcon->cfid directly, use the cfid we get from open_cached_dir
  cifs: Move cached-dir functions into a separate file
  cifs: Remove {cifs,nfs}_fscache_release_page()
  cifs: fix lock length calculation

afs: Enable multipage folio support

Enable multipage folio support for the afs filesystem.

Support has already been implemented in netfslib, fscache and cachefiles
and in most of afs, but I've waited for Matthew Wilcox's latest folio
changes.

Note that it does require a change to afs_write_begin() to return the
correct subpage.  This is a "temporary" change as we're working on
getting rid of the need for ->write_begin() and ->write_end()
completely, at least as far as network filesystems are concerned - but
it doesn't prevent afs from making use of the capability.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: kafs-testing@auristor.com
Cc: Marc Dionne <marc.dionne@auristor.com>
Cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/lkml/2274528.1645833226@warthog.procyon.org.uk/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'timers-urgent-2022-08-13' of git://git./linux/kernel/git/tip/tip

Pull timer fixes from Ingo Molnar:
 "Misc timer fixes:

   - fix a potential use-after-free bug in posix timers

   - correct a prototype

   - address a build warning"

* tag 'timers-urgent-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  posix-cpu-timers: Cleanup CPU timers before freeing them during exec
  time: Correct the prototype of ns_to_kernel_old_timeval and ns_to_timespec64
  posix-timers: Make do_clock_gettime() static

Merge tag 'x86-urgent-2022-08-13' of git://git./linux/kernel/git/tip/tip

Pull x86 fix from Ingo Molnar:
 "Fix the 'IBPB mitigated RETBleed' mode of operation on AMD CPUs (not
  turned on by default), which also need STIBP enabled (if available) to
  be '100% safe' on even the shortest speculation windows"

* tag 'x86-urgent-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/bugs: Enable STIBP for IBPB mitigated RETBleed

Merge tag 'i2c-for-5.20-part2' of git://git./linux/kernel/git/wsa/linux

Pull more i2c updates from Wolfram Sang:

 - two driver fixes for issues introduced this cycle

 - one trivial driver improvement regarding ACPI

 - more DTS conversion and additions

 - documentation updates

 - subsystem-wide move from strlcpy to strscpy

* tag 'i2c-for-5.20-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  docs: i2c: i2c-sysfs: fix hyperlinks
  docs: i2c: i2c-sysfs: improve wording
  docs: i2c: instantiating-devices: add syntax coloring to dts and C blocks
  docs: i2c: smbus-protocol: improve DataLow/DataHigh definition
  docs: i2c: i2c-protocol: remove unused legend items
  docs: i2c: i2c-protocol,smbus-protocol: remove nonsense words
  docs: i2c: i2c-protocol: update introductory paragraph
  i2c: move core from strlcpy to strscpy
  i2c: move drivers from strlcpy to strscpy
  i2c: kempld: Support ACPI I2C device declaration
  i2c: mediatek: add i2c compatible for MT8188
  dt-bindings: i2c: update bindings for mt8188 soc
  i2c: microchip-corei2c: fix erroneous late ack send
  dt-bindings: i2c: qcom,i2c-cci: convert to dtschema
  i2c: qcom-geni: Fix GPI DMA buffer sync-back

Merge tag 'ntb-5.20' of https://github.com/jonmason/ntb

Pull NTB updates from Jon Mason:
 "Non-Transparent Bridge updates.

  Fix of heap data and clang warnings, support for a new Intel NTB
  device, and NTB EndPoint Function (EPF) support and the various fixes
  for that"

* tag 'ntb-5.20' of https://github.com/jonmason/ntb:
  MAINTAINERS: add PCI Endpoint NTB drivers to NTB files
  NTB: EPF: Tidy up some bounds checks
  NTB: EPF: Fix error code in epf_ntb_bind()
  PCI: endpoint: pci-epf-vntb: reduce several globals to statics
  PCI: endpoint: pci-epf-vntb: fix error handle in epf_ntb_mw_bar_init()
  PCI: endpoint: Fix Kconfig dependency
  NTB: EPF: set pointer addr to null using NULL rather than 0
  Documentation: PCI: extend subheading underline for "lspci output" section
  Documentation: PCI: Use code-block block for scratchpad registers diagram
  Documentation: PCI: Add specification for the PCI vNTB function device
  PCI: endpoint: Support NTB transfer between RC and EP
  NTB: epf: Allow more flexibility in the memory BAR map method
  PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address
  ntb: intel: add GNR support for Intel PCIe gen5 NTB
  NTB: ntb_tool: uninitialized heap data in tool_fn_write()
  ntb: idt: fix clang -Wformat warnings

Merge tag 'xfs-5.20-merge-8' of git://git./fs/xfs/xfs-linux

Pull more xfs updates from Darrick Wong:
 "There's not a lot this time around, just the usual bug fixes and
  corrections for missing error returns.

   - Return error codes from block device flushes to userspace

   - Fix a deadlock between reclaim and mount time quotacheck

   - Fix an unnecessary ENOSPC return when doing COW on a filesystem
     with severe free space fragmentation

   - Fix a miscalculation in the transaction reservation computations
     for file removal operations"

* tag 'xfs-5.20-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: fix inode reservation space for removing transaction
  xfs: Fix false ENOSPC when performing direct write on a delalloc extent in cow fork
  xfs: fix intermittent hang during quotacheck
  xfs: check return codes when flushing block devices

Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi

Pull more SCSI updates from James Bottomley:
 "Mostly small bug fixes and trivial updates.

  The major new core update is a change to the way device, target and
  host reference counting is done to try to make it more robust (this
  change has soaked for a while to try to winkle out any bugs)"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: pm8001: Fix typo 'the the' in comment
  scsi: megaraid_sas: Remove redundant variable cmd_type
  scsi: FlashPoint: Remove redundant variable bm_int_st
  scsi: zfcp: Fix missing auto port scan and thus missing target ports
  scsi: core: Call blk_mq_free_tag_set() earlier
  scsi: core: Simplify LLD module reference counting
  scsi: core: Make sure that hosts outlive targets
  scsi: core: Make sure that targets outlive devices
  scsi: ufs: ufs-pci: Correct check for RESET DSM
  scsi: target: core: De-RCU of se_lun and se_lun acl
  scsi: target: core: Fix race during ACL removal
  scsi: ufs: core: Correct ufshcd_shutdown() flow
  scsi: ufs: core: Increase the maximum data buffer size
  scsi: lpfc: Check the return value of alloc_workqueue()

Merge tag 'block-6.0-2022-08-12' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

 - NVMe pull request
     - print nvme connect Linux error codes properly (Amit Engel)
     - fix the fc_appid_store return value (Christoph Hellwig)
     - fix a typo in an error message (Christophe JAILLET)
     - add another non-unique identifier quirk (Dennis P. Kliem)
     - check if the queue is allocated before stopping it in nvme-tcp
       (Maurizio Lombardi)
     - restart admin queue if the caller needs to restart queue in
       nvme-fc (Ming Lei)
     - use kmemdup instead of kmalloc + memcpy in nvme-auth (Zhang
       Xiaoxu)

 - __alloc_disk_node() error handling fix (Rafael)

* tag 'block-6.0-2022-08-12' of git://git.kernel.dk/linux-block:
  block: Do not call blk_put_queue() if gendisk allocation fails
  nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG GAMMIX S70
  nvme-tcp: check if the queue is allocated before stopping it
  nvme-fabrics: Fix a typo in an error message
  nvme-fabrics: parse nvme connect Linux error codes
  nvmet-auth: use kmemdup instead of kmalloc + memcpy
  nvme-fc: fix the fc_appid_store return value
  nvme-fc: restart admin queue if the caller needs to restart queue

Merge tag 'io_uring-6.0-2022-08-13' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:

 - Regression fix for this merge window, fixing a wrong order of
   arguments for io_req_set_res() for passthru (Dylan)

 - Fix for the audit code leaking context memory (Peilin)

 - Ensure that provided buffers are memcg accounted (Pavel)

 - Correctly handle short zero-copy sends (Pavel)

 - Sparse warning fixes for the recvmsg multishot command (Dylan)

 - Error handling fix for passthru (Anuj)

 - Remove randomization of struct kiocb fields, to avoid it growing in
   size if re-arranged in such a fashion that it grows more holes or
   padding (Keith, Linus)

 - Small series improving type safety of the sqe fields (Stefan)

* tag 'io_uring-6.0-2022-08-13' of git://git.kernel.dk/linux-block:
  io_uring: add missing BUILD_BUG_ON() checks for new io_uring_sqe fields
  io_uring: make io_kiocb_to_cmd() typesafe
  fs: don't randomize struct kiocb fields
  io_uring: consistently make use of io_notif_to_data()
  io_uring: fix error handling for io_uring_cmd
  io_uring: fix io_recvmsg_prep_multishot sparse warnings
  io_uring/net: send retry for zerocopy
  io_uring: mem-account pbuf buckets
  audit, io_uring, io-wq: Fix memory leak in io_sq_thread() and io_wqe_worker()
  io_uring: pass correct parameters to io_req_set_res

perf test: Refactor shell tests allowing subdirs

This is a prelude to adding more tests to shell tests and in order to
support putting those tests into subdirectories, I need to change the
test code that scans/finds and runs them.

To support subdirs I have to recurse so it's time to refactor the code
to allow this and centralize the shell script finding into one location
and only one single scan that builds a list of all the found tests in
memory instead of it being duplicated in 3 places.

This code also optimizes things like knowing the max width of desciption
strings (as we can do that while we scan instead of a whole new pass of
opening files).

It also more cleanly filters scripts to see only *.sh files thus
skipping random other files in directories like *~ backup files, other
random junk/data files that may appear and the scripts must be
executable to make the cut (this ensures the script lib dir is not seen
as scripts to run).

This avoids perf test running previous older versions of test scripts
that are editor backup files as well as skipping perf.data files that
may appear and so on.

Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20220812121641.336465-2-carsten.haitzler@foss.arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf vendor events: Update events for snowridgex

Update the events to v1.20, update events for snowridgex by the latest
event converter tools.

Use script at:
https://github.com/intel/event-converter-for-linux-perf/blob/master/download_and_gen.py

to download and generate the latest events and metrics. Manually copy
the snowridgex files into perf.

Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220812085239.3089231-12-zhengjun.xing@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf vendor events: Update events and metrics for skylakex

Update the events to v1.28, the metrics are based on TMA 4.4 full, update
events and metrics for skylakex by the latest event converter tools.

Use script at:
https://github.com/intel/event-converter-for-linux-perf/blob/master/download_and_gen.py

to download and generate the latest events and metrics. Manually copy
the skylakex files into perf.

Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220812085239.3089231-11-zhengjun.xing@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf vendor events: Update metrics for sapphirerapids

The metrics are based on TMA 4.4 full, add new metrics “UNCORE_FREQ” for
sapphirerapids.

Use script at:
https://github.com/intel/event-converter-for-linux-perf/blob/master/download_and_gen.py

to download and generate the latest events and metrics. Manually copy
the sapphirerapids files into perf.

Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220812085239.3089231-10-zhengjun.xing@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf vendor events: Update events for knightslanding

Update the events to v9, update events for knightslanding by the latest
event converter tools.

Use script at:
https://github.com/intel/event-converter-for-linux-perf/blob/master/download_and_gen.py

to download and generate the latest events and metrics. Manually copy
the knightslanding files into perf.

Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220812085239.3089231-9-zhengjun.xing@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf vendor events: Update metrics for jaketown

The metrics are based on TMA 4.4 full, add new metrics “UNCORE_FREQ” for
jaketown.

Use script at:
https://github.com/intel/event-converter-for-linux-perf/blob/master/download_and_gen.py

to download and generate the latest events and metrics. Manually copy
the jaketown files into perf.

Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220812085239.3089231-8-zhengjun.xing@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf vendor events: Update metrics for ivytown

The metrics are based on TMA 4.4 full, add new metrics “UNCORE_FREQ” for
ivytown.

Use script at:
https://github.com/intel/event-converter-for-linux-perf/blob/master/download_and_gen.py

to download and generate the latest events and metrics. Manually copy
the ivytown files into perf.

Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220812085239.3089231-7-zhengjun.xing@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf vendor events: Update events and metrics for icelakex

Update the events to v1.15, the metrics are based on TMA 4.4 full, update
events and metrics for icelakex by the latest event converter tools.

Use script at:
https://github.com/intel/event-converter-for-linux-perf/blob/master/download_and_gen.py

to download and generate the latest events and metrics. Manually copy
the icelakex files into perf.

Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220812085239.3089231-6-zhengjun.xing@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf vendor events: Update events and metrics for haswellx

Update the events to v25, the metrics are based on TMA 4.4 full, update
events and metrics for haswellx by the latest event converter tools.

Use script at:
https://github.com/intel/event-converter-for-linux-perf/blob/master/download_and_gen.py

to download and generate the latest events and metrics. Manually copy
the haswellx files into perf.

Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220812085239.3089231-5-zhengjun.xing@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf vendor events: Update events and metrics for cascadelakex

Update to v16, the metrics are based on TMA 4.4 full, update events and add
new metrics “UNCORE_FREQ” for cascadelakex.

Use script at:
https://github.com/intel/event-converter-for-linux-perf/blob/master/download_and_gen.py

to download and generate the latest events and metrics. Manually copy
the cascadelakex files into perf.

Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220812085239.3089231-4-zhengjun.xing@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf vendor events: Update events and metrics for broadwellx

Update to v19, the metrics are based on TMA 4.4 full, update events and add
new metrics “UNCORE_FREQ” for broadwellx.

Use script at:
https://github.com/intel/event-converter-for-linux-perf/blob/master/download_and_gen.py

to download and generate the latest events and metrics. Manually copy
the broadwellx files into perf.

Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220812085239.3089231-3-zhengjun.xing@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf vendor events: Update metrics for broadwellde

The metrics are based on TMA 4.4 full, add new metrics “UNCORE_FREQ” for
broadwellde.

Use script at:

  https://github.com/intel/event-converter-for-linux-perf/blob/master/download_and_gen.py

to download and generate the latest events and metrics. Manually copy
the broadwellde files into perf.

Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220812085239.3089231-2-zhengjun.xing@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf jevents: Fold strings optimization

If a shorter string ends a longer string then the shorter string may
reuse the longer string at an offset. For example, on x86 the event
arith.cycles_div_busy and cycles_div_busy can be folded, even though
they have difference names the strings are identical after 6
characters. cycles_div_busy can reuse the arith.cycles_div_busy string
at an offset of 6.

In pmu-events.c this looks like the following where the 'also:' lists
folded strings:

/* offset=177541 */ "arith.cycles_div_busy\000\000pipeline\000Cycles the divider is busy\000\000\000event=0x14,period=2000000,umask=0x1\000\000\000\000\000\000\000\000\000" /* also: cycles_div_busy\000\000pipeline\000Cycles the divider is busy\000\000\000event=0x14,period=2000000,umask=0x1\000\000\000\000\000\000\000\000\000 */

As jevents.py combines multiple strings for an event into a larger
string, the amount of folding is minimal as all parts of the event must
align. Other organizations can benefit more from folding, but lose space
by say recording more offsets.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220812230949.683239-15-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf jevents: Compress the pmu_events_table

The pmu_events array requires 15 pointers per entry which in position
independent code need relocating. Change the array to be an array of
offsets within a big C string. Only the offset of the first variable is
required, subsequent variables are stored in order after the \0
terminator (requiring a byte per variable rather than 4 bytes per
offset).

The file size savings are:

no jevents - the same 19,788,464bytes
x86 jevents - ~16.7% file size saving 23,744,288bytes vs 28,502,632bytes
all jevents - ~19.5% file size saving 24,469,056bytes vs 30,379,920bytes
default build options plus NO_LIBBFD=1.

For example, the x86 build savings come from .rela.dyn and
.data.rel.ro becoming smaller by 3,157,032bytes and 3,042,016bytes
respectively. .rodata increases by 1,432,448bytes, giving an overall
4,766,600bytes saving.

To make metric strings more shareable, the topic is changed from say
'skx metrics' to just 'metrics'.

To try to help with the memory layout the pmu_events are ordered as used
by perf qsort comparator functions.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220812230949.683239-14-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf metrics: Copy entire pmu_event in find metric

The pmu_event passed to the pmu_events_table_for_each_event is invalid
after the loop. Copy the entire struct in metricgroup__find_metric.
Reduce the scope of this function to static.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220812230949.683239-13-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf pmu-events: Hide the pmu_events

Hide that the pmu_event structs are an array with a new wrapper struct.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220812230949.683239-12-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf pmu-events: Don't assume pmu_event is an array

The current code assumes that a struct pmu_event can be iterated over
forward until a NULL pmu_event is encountered.

This makes it difficult to refactor pmu_event.

Add a loop function taking a callback function that's passed the struct
pmu_event.

This way the pmu_event is only needed for one element and not an entire
array.

Switch existing code iterating over the pmu_event arrays to use the new
loop function pmu_events_table_for_each_event.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220812230949.683239-11-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf pmu-events: Move test events/metrics to JSON

Move arrays of pmu_events into the JSON code so that it may be
regenerated and modified by the jevents.py script.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220812230949.683239-10-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf test: Use full metric resolution

The simple metric resolution doesn't handle recursion properly, switch
to use the full resolution as with the parse-metric tests which also
increases coverage. Don't set the values for the metric backward as
failures to generate a result are ignored.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220812230949.683239-9-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf pmu-events: Hide pmu_events_map

Move usage of the table to pmu-events.c so it may be hidden. By
abstracting the table the implementation can later be changed.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220812230949.683239-8-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf pmu-events: Avoid passing pmu_events_map

Preparation for hiding pmu_events_map as an implementation detail. While
the map is passed, the table of events is all that is normally wanted.

While modifying the function's types, rename pmu_events_map__find to
pmu_events_table__find to match later encapsulation. Similarly rename
pmu_add_cpu_aliases_map to pmu_add_cpu_aliases_table.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220812230949.683239-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf pmu-events: Hide pmu_sys_event_tables

Move usage of the table to pmu-events.c so it may be hidden. By
abstracting the table the implementation can later be changed.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220812230949.683239-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf jevents: Sort JSON files entries

Sort the JSON files entries on conversion to C. The sort order tries to
replicated cmp_sevent from pmu.c so that the input there is already
sorted except for sysfs events. Specifically, the sort order is given by
the tuple:

(not j.desc is None, fix_none(j.topic), fix_none(j.name), fix_none(j.pmu), fix_none(j.metric_name))

which is putting events with descriptions and topics before those
without, then sorting by name, then pmu and finally metric_name

Add the topic to JsonEvent on reading to simplify. Remove an unnecessary
lambda in the JSON reading.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220812230949.683239-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf jevents: Provide path to JSON file on error

If a JSONDecoderError or similar is raised then it is useful to know the
path. Print this and then raise the exception agan.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220812230949.683239-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf jevents: Remove the type/version variables

pmu_events_map has a type variable that is always initialized to "core"
and a version variable that is never read. Remove these from the API as
it is straightforward to add them back when necessary.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220812230949.683239-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf jevent: Add an 'all' architecture argument

When 'all' is passed as the architecture generate a mapping table for
all architectures. This simplifies testing. To identify the table for an
architecture add an arch variable to the pmu_events_map.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220812230949.683239-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'riscv-for-linus-5.20-mw2' of git://git./linux/kernel/git/riscv/linux

Pull more RISC-V updates from Palmer Dabbelt:
 "There's still a handful of new features in here, but there are a lot
  of fixes/cleanups as well:

   - Support for the Zicbom extension for explicit cache-block
     management, along with the necessary bits to make the non-standard
     cache management ops on the Allwinner D1 function

   - Support for the Zihintpause extension, which codifies a go-slow
     instruction used for cpu_relax()

   - Support for the Sstc extension for supervisor-mode timer/counter
     management

   - Many device tree fixes and cleanups, including a large set for the
     Canaan device trees

   - A handful of fixes and cleanups for the PMU driver"

* tag 'riscv-for-linus-5.20-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (43 commits)
  dt-bindings: gpio: sifive: add gpio-line-names
  wireguard: selftests: set CONFIG_NONPORTABLE on riscv32
  RISC-V: KVM: Support sstc extension
  RISC-V: Improve SBI definitions
  RISC-V: Move counter info definition to sbi header file
  RISC-V: Fix SBI PMU calls for RV32
  RISC-V: Update user page mapping only once during start
  RISC-V: Fix counter restart during overflow for RV32
  RISC-V: Prefer sstc extension if available
  RISC-V: Enable sstc extension parsing from DT
  RISC-V: Add SSTC extension CSR details
  riscv:uprobe fix SR_SPIE set/clear handling
  dt-bindings: riscv: fix SiFive l2-cache's cache-sets
  riscv: ensure cpu_ops_sbi is declared
  RISC-V: cpu_ops_spinwait.c should include head.h
  RISC-V: Declare cpu_ops_spinwait in <asm/cpu_ops.h>
  riscv: dts: starfive: correct number of external interrupts
  riscv: dts: sifive unmatched: Add PWM controlled LEDs
  riscv/purgatory: Omit use of bin2c
  riscv/purgatory: hard-code obj-y in Makefile
  ...

Merge tag 'devicetree-fixes-for-6.0-1' of git://git./linux/kernel/git/robh/linux

Pull devicetree fixes from Rob Herring:

 - Fix schema warnings in qcom,ipq6018-pinctrl and sdhci-msm

 - Convert Qualcomm SPMI PMIC to DT schema

 - Make secure interrupt optional for arm,mhu

 - Fix google,cros-ec-typec binding allowed properties

 - Update a bunch of bouncing email addresses

* tag 'devicetree-fixes-for-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: chrome: google,cros-ec-typec: restrict allowed properties
  dt-bindings: Drop Dan Murphy and Ricardo Rivera-Matos
  dt-bindings: Drop Robert Jones
  dt-bindings: Drop Beniamin Bia and Stefan Popa
  dt-bindings: iio: Drop Bogdan Pricop
  dt-bindings: iio: Drop Joachim Eastwood
  dt-bindings: mailbox: arm,mhu: Make secure interrupt optional
  dt-bindings: pinctrl: qcom,ipq6018: Fix example 'gpio-ranges' size
  dt-bindings: Drop DT_MK_SCHEMA_FLAGS conditional selecting schema files
  dt-bindings: mfd: convert to yaml Qualcomm SPMI PMIC
  dt-bindings: mmc: sdhci-msm: Fix 'operating-points-v2 was unexpected' issue
  dt-bindings: display: simple-framebuffer: Drop Bartlomiej Zolnierkiewicz

Merge tag 'rtc-6.0' of git://git./linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "New drivers:
   - Microchip PolarFire
   - Nuvoton NCT3018Y
   - TI K3 RTC

  Subsystem:
   - Replace flush_scheduled_work() with flush_work()
   - Remove deprecated ida_simple_get()/ida_simple_remove() calls

  Drivers:
   - use simple i2c probe where possible
   - sun6i: add R329 support
   - zynqmp: add calibration support
   - vr41xx: remove unused driver"

* tag 'rtc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (31 commits)
  rtc: spear: set range max
  rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0
  rtc: zynqmp: initialize fract_tick
  rtc: Add NCT3018Y real time clock driver
  dt-bindings: rtc: nuvoton: add NCT3018Y Real Time Clock
  dt-bindings: rtc: nxp,pcf85063: Convert to DT schema
  dt-bindings: rtc: microcrystal,rv3032: Add missing type to 'trickle-voltage-millivolt'
  rtc: rx8025: fix 12/24 hour mode detection on RX-8035
  rtc: cros-ec: Only warn once in .remove() about notifier_chain problems
  rtc: vr41xx: remove driver
  rtc: mpfs: remove 'pending' variable from mpfs_rtc_wakeup_irq_handler()
  rtc: rv8803: fix missing unlock on error in rv8803_set_time()
  rtc: zynqmp: Add calibration set and get support
  rtc: zynqmp: Updated calibration value
  dt-bindings: rtc: zynqmp: Add clock information
  rtc: sun6i: add support for R329 RTC
  rtc: Directly use ida_alloc()/free()
  rtc: Introduce ti-k3-rtc
  dt-bindings: rtc: Add TI K3 RTC description
  dt-bindings: rtc: qcom-pm8xxx-rtc: Update the maintainers section
  ...

io_uring: add missing BUILD_BUG_ON() checks for new io_uring_sqe fields

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Link: https://lore.kernel.org/r/ffcaf8dc4778db4af673822df60dbda6efdd3065.1660201408.git.metze@samba.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: make io_kiocb_to_cmd() typesafe

We need to make sure (at build time) that struct io_cmd_data is not
casted to a structure that's larger.

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Link: https://lore.kernel.org/r/c024cdf25ae19fc0319d4180e2298bade8ed17b8.1660201408.git.metze@samba.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

fs: don't randomize struct kiocb fields

This is a size sensitive structure and randomizing can introduce extra
padding that breaks io_uring's fixed size expectations. There are few
fields here as it is, half of which need a fixed order to optimally
pack, so the randomization isn't providing much.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/io-uring/b6f508ca-b1b2-5f40-7998-e4cff1cf7212@kernel.dk/
Signed-off-by: Jens Axboe <axboe@kernel.dk>

cifs: Do not access tcon->cfids->cfid directly from is_path_accessible

cfids will soon keep a list of cached fids so we should not access this
directly from outside of cached_dir.c

Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

MAINTAINERS: add PCI Endpoint NTB drivers to NTB files

The PCI Endpoint NTB drivers are under the NTB umbrella.  Add an entry
there to allow for notification of changes for it.

Signed-off-by: Jon Mason <jdmason@kudzu.us>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>