drm/amd/display: dal 3.1.33

Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: boot up/S4 fix mainlink off before BL.

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: VGA black screen from s3 when attached to hook

[Description] For MST, DC already notify MST sink for MST mode, DC stll
check DP SINK DPCD register to see if MST enabled. DP RX firmware may
not handle this properly.

Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Rearchitecture HDMI HPD

- Disabled HPD filter and used HPD software timer instead
- Allows DM to disable HPD filtering

Signed-off-by: John Barberiz <jbarberi@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix potential uninitialized use of 'idle' in amdgpu_ids.c

v2: Use NULL and reverse christmas tree ordering

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Unify the dm resume calls into one

amdgpu_dm_display_resume is now called from dm_resume to
unify DAL resume call into a single function call

There is no more need to separately call 2 resume functions
for DM.

Initially they were separated to resume display state after
cursor is pinned. But because there is no longer any corruption
with the cursor - the calls can be merged into one function hook.

Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add a missing lock for drm_mm_takedown

Inside amdgpu_gtt_mgr_fini add a missing lock to maintain
locking balance

Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: cleanup VCN IB generation

Start to use amdgpu_bo_create_reserved v2.

v2:
Fix missing pointer init to NULL.
Remove extra new lines.

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Tested-and-Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix and cleanup UVD IB generation

We didn't synced the BO after validating it. Also sart to use
amdgpu_bo_create_reserved to simplify things.

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove unused CFLAGS entry in DML Makefile

Missed that with a previous change that removed unused files.

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: remove extra TT unpopulated check

The subsystem should check that, not the driver.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove extra TT unpopulated check

The subsystem should check that, not the driver.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: add ttm_tt_populate wrapper

Stop calling the driver callback directly.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu/dc/calcs: Support clang option for stack alignment

calcs uses the compiler option -mpreferred-stack-boundary=4 to configure
a stack alignment of 16 bytes. Clang uses the option -mstack-alignment
instead, which expects as parameter the alignment in bytes, and not a
power of two like -mpreferred-stack-boundary.

Probe for both compiler options and use the correct one, similar to
what is done in arch/x86/Makefile.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu/dc/dml: Support clang option for stack alignment

DML uses the compiler option -mpreferred-stack-boundary=4 to configure
a stack alignment of 16 bytes. Clang uses the option -mstack-alignment
instead, which expects as parameter the alignment in bytes, and not a
power of two like -mpreferred-stack-boundary.

Probe for both compiler options and use the correct one, similar to
what is done in arch/x86/Makefile.

Reported-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu/dc/calcs: Consolidate redundant CFLAGS

Use a variable for common CFLAGS instead of specifying the same flags
for every source file.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu/dc/dml: Consolidate redundant CFLAGS

Use a variable for common CFLAGS instead of specifying the same flags
for every source file.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add place holder for soc15 asic init on emulation

Add common smu_soc_asic_init function to emulate the sillicon post sequence

Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Double the timeout count on emulation mode

Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Avoid get vram info from atom bios on emulation mode

Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix none-powerplay issue when load driver on emulation mode

On emulation mode , driver will be loaded with powerplay disabled

Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Basic emulation support

Add amdgpu_emu_mode module parameter to control the emulation mode
Avoid vbios operation on emulation since there is no vbios post duirng emulation,
use the common hw_init to simulate the post

Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Acked-By: Alex Deucher <alexander.deucher@amd.com>
Acked-By: Christian Konig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add new device to use atpx quirk

The affected system (0x0813) is pretty similar to another one (0x0812),
it also needs to use ATPX power control.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amd/pp: Restore power profile mode in auto dpm level on Vega10

As auto power profile mode still not support on vega10, so
just restore default profile mode in auto dpm level.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Get/set dgpu power cap via hwmon API

v2: change power unit to microWatt

Adust power limit through power1_cap
Get min/max power limit through power1_cap_min/power1_cap_max

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Expose set/get_power_limit for DGPU

User can change power limit between
[0, 1] * max power limit.

Set power limit to 0, restore to max power limit.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu/dc: Fix enum mismatch in calls to program_color_matrix()

The driver passes GRAPHICS_CSC_ADJUST_TYPE_SW of type enum
graphics_csc_adjust_type to program_color_matrix(), however the function
expects a parameter of type enum grph_color_adjust_option. Supposedly
the intention was to pass GRPH_COLOR_MATRIX_SW, which has the same value
as GRAPHICS_CSC_ADJUST_TYPE_SW, so the mismatch didn't cause any trouble.

Pass GRPH_COLOR_MATRIX_SW to program_color_matrix() instead of
GRAPHICS_CSC_ADJUST_TYPE_SW, this also fixes the following warning when
building the kernel with clang:

drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_transform.c:1129:24:
  error: implicit conversion from enumeration type
  'enum graphics_csc_adjust_type' to different enumeration type
  'enum grph_color_adjust_option' [-Werror,-Wenum-conversion]
    xfm_dce, tbl_entry, GRAPHICS_CSC_ADJUST_TYPE_SW);

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove extra pairs of parentheses in dce_calcs.c

The double parentheses are not needed. Removing them fixes multiple
warnings like this when building with clang:

drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:617:42:
  error: equality comparison with extraneous parentheses
    [-Werror,-Wparentheses-equality]
  if ((data->graphics_micro_tile_mode == bw_def_rotated_micro_tiling)) {

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Enable ip block bit mask print out info by default

Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Christian Konig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: Remove extra pair of parentheses

The double parentheses are not needed. Removing them fixes the following
warning when building with clang:

drivers/gpu/drm/amd/powerplay/smumgr/tonga_smumgr.c:419:29:
  error: equality comparison with extraneous parentheses
    [-Werror,-Wparentheses-equality]
  if ((data->vdd_gfx_control == SMU7_VOLTAGE_CONTROL_BY_SVID2)) {

Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: Fix enum mismatch

In several locations the driver uses AMD_CG_STATE_UNGATE (type enum
amd_clockgating_state) instead of AMD_PG_STATE_UNGATE (type enum
amd_powergating_stat) and vice versa. Both constants have the same
value, so this doesn't cause any problems, but we still want to pass
the correct type.

Fixing the mismatch resolves multiple warnings like this when building
with clang:

drivers/gpu/drm/amd/amdgpu/../powerplay/hwmgr/cz_clockpowergating.c:169:7:
  error: implicit conversion from enumeration type 'enum
  amd_powergating_state' to different enumeration type 'enum
  amd_clockgating_state' [-Werror,-Wenum-conversion]
    AMD_PG_STATE_UNGATE);

Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add mmhub powergating set by smu

PSP will disable legacy mmhub PG setting that is programming
registers, and drive will use SMC message to
set it up.

Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add mmhub powergating by smu in powerplay

new generic interface is added in powerplay.

Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: implement set_mmhub_powergating_by_smu for Raven

mmhub PG is enabled by SMU FW only for Raven.

Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add an interface of amdgpu_dpm_set_mmhub_powergating_by_smu

Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: delete some dead code

We deleted some code in e154162ef75d ("drm/amd/powerplay: refine pp code
for raven") but there were a few related bits that were missed.  Let's
delete them as well.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay:  Zero out power data in AMDGPU_PP_SENSOR_GPU_POWER readout

Since 12 of the 16 bytes are not initialized with anything let's ensure they're
sensibly zeroed out otherwise debugfs callers will read back garbage
(because they assume debugfs wrote sensible data back...)

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add primary tmz_c and meta tmz tmz_c.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: enable #PME code path for RV.

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: dal 3.1.32

Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Optimize regamma calculations

There are several optimizations:
1) Use predefined SRGB, don't calculate. This is the most common case.
2) Precompute HW X points at boot since they're fixed in ColModule
3) Precompute PQ - it never changes and is very CPU intensive in fixed pt.
4) Reduce number of points in ColModule to 512 (32x16) from 1024. This also
requires reducing some regions for legacy DCEs to 16 pts at most.

Performance
1) is super-fast, build_output_tf is 1-2us, down from 25000-30000.
Programming also fast since only one reg write.
2)+3) gives build_output_tf for PQ in ~100us range, down from ~80000-110000
2) + 4) results in slightly over 50% improvement. It gives an idea of the
savings when we can't use SRGB or PQ table (e.g. sdr white level > 80).

There's also a bit of refactoring: renaming some stuff that was misleading
and removing a lot of magic numbers that novices might not be able to
understand where they come from and what they mean.

Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: resume from S3 bypass power down HW block.

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add eDP 1.2+ polling for T7

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: dal 3.1.31

Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fixed if statement parameters to add a delay on disconnect

Signed-off-by: John Barberiz <jbarberi@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add return value for detect dp.

System soft hang when hotplug specific 4K DP panel
due to link caps read error and incorrect link setting
parmas to enable dp.
Add status check for DPCD read and add return value
for detect dp, in case of false, return from caller,
avoid further false operation.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix boot-up on vega10

Fixing null-deref on Vega10 due to regression after
'fix cursor related Pstate hang' change.
Added null checks in setting cursor position.

Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove couple of unused OPTC registers

Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: turn off cursor when disconnect plane

As a precaution to prevent cases where cursor is enabled on a pipe
that is disabled, always turn off cursor when disconnecting plane.

Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Expose is_rgb_cspace function in hw_sequencer

Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: WBSCL filter init calculation fixes

* Previous code did some calculations with a mix of normal integers and
  integers aligned as U2.24 fixed-point values.
* There were bugs in the conversion of the final result into the
  S4.19 values required for the registers.

Signed-off-by: Ken Chalmers <ken.chalmers@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove unused function prototypes

Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix cursor related Pstate hang

Move cursor programming to inside the OTG_MASTER_UPDATE_LOCK

If graphics plane go from 1 pipe to hsplit, the cursor updates
after mpc programming and unlock. Which means there is a window
of time where cursor is enabled on the wrong pipe if it's on
the right side of the screen (i.e. case where cursor need to
move from pipe 0 to pipe 3 post split). This will cause pstate hang.

Solution is to program the cursor while still locked.

Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Set irq state only on existing crtcs

Because AMDGPU_CRTC_IRQ_VLINE1 = 6, it expected 6 more crtcs to be
programed with disabled irq state in amdgpu_irq_disable_all. That caused errors and accessed
the wrong memory location.

Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Null check for gamma correction.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Check hubp in pipe_ctx not in res_pool.

When disable plane, check power gate flag in hubp with pipe_ctx,
not with res_pool.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: sync the VM PD/PT before clearing it

Otherwise we might overwrite stuff which is still in use.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: dal 3.1.30

Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Bypass gamma set if not standard type

If non-standard gamma type detected set identity matrix flag
so that we can bypass the gamma mode.

Signed-off-by: John Barberiz <jbarberi@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: wait for T9 after backlight off mainlink blank.

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix multiple definitions of handle_crc_irq

If CONFIG_DEBUG_FS is disabled, then CRC should also be disabled.
Therefore, amdgpu_dm_crtc_handle_crc_irq was redefined as a no-op
function within amdgpu_dm.h.

However, since amdgpu_dm.h is included in multiple files, this caused
conflicts when linking during compile. Therefore, Use a macro to
define the function as a no-op instead.

Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fixed non-native modes not lighting up

There is no need to call drm_mode_set_crtcinfo() again once
crtc timing is decided. Otherwise non-native/unsupported timing
might get overwritten.

Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove return when no EDID read.

Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: BL setting save/restore

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Adding missing TMZ sh/mask entries for DCN1 SURFACE_CONTROL

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <tony.cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: clear the shadow fence as well

It also needs to be initialized.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: release the VM shadow in the error path as well

Without it we run into a memory leak.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove unused display_vblank_wait interface

No longer used since we changed the MC programming sequence.

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/dce: fix mask in dce_v*_0_is_in_vblank

Using the wrong mask.

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Noticed-by: Hans de Ruiter <hans@keasigmadelta.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix incompatible structure layouts

Building the amd display driver with link-time optimizations revealed a bug
that caused dal_cmd_tbl_helper_dce80_get_table() and
dal_cmd_tbl_helper_dce110_get_table() get called with an incompatible
return type between the two callers in command_table_helper.c and
command_table_helper2.c:

drivers/gpu/drm/amd/amdgpu/../display/dc/bios/dce80/command_table_helper_dce80.h:31: error: type of 'dal_cmd_tbl_helper_dce80_get_table' does not match original declaration [-Werror=lto-type-mismatch]
 const struct command_table_helper *dal_cmd_tbl_helper_dce80_get_table(void);

drivers/gpu/drm/amd/amdgpu/../display/dc/bios/dce80/command_table_helper_dce80.c:351: note: 'dal_cmd_tbl_helper_dce80_get_table' was previously declared here
 const struct command_table_helper *dal_cmd_tbl_helper_dce80_get_table(void)

drivers/gpu/drm/amd/amdgpu/../display/dc/bios/dce110/command_table_helper_dce110.h:32: error: type of 'dal_cmd_tbl_helper_dce110_get_table' does not match original declaration [-Werror=lto-type-mismatch]
 const struct command_table_helper *dal_cmd_tbl_helper_dce110_get_table(void);

drivers/gpu/drm/amd/amdgpu/../display/dc/bios/dce110/command_table_helper_dce110.c:361: note: 'dal_cmd_tbl_helper_dce110_get_table' was previously declared here
 const struct command_table_helper *dal_cmd_tbl_helper_dce110_get_table(void)

The two versions of the structure are obviously derived from the same
one, but have diverged over time, before they got added to the kernel.

This moves the structure to a new shared header file and uses the superset
of the members, to ensure the interfaces are all compatible.

Fixes: ae79c310b1a6 ("drm/amd/display: Add DCE12 bios parser support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: cache the fence to wait for a VMID

Beneficial when a lot of processes are waiting for VMIDs.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: restructure amdgpu_vmid_grab

Now that we have the different cases for grabbing a VMID in separate
functions, restructure the top level function to only have one place
where VMIDs are assigned to jobs.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move reusing VMIDs into separate function

Let's try this once more.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: cleanup and simplify amdgpu_vmid_grab_reserved

Drop the "_locked" from the name, cleanup and simplify the logic a bit.
Add missing comments.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: stop checking GPU reset counter during VMID grab

We do this later on when we flush the VMID anyway.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: make VMID owner none atomic v2

The variable is protected by the VMID mutex anyway.

v2: grab the mutex while resetting the VMID as well

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: split finding idle VMID into separate function

No functional change, but makes it easier to maintain the code.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: make VMID assignment more fair v2

Similar to finding an idle one before reuse.

This guarantees fairness between processes. Otherwise process with a reserved
VMID have an unfair advantage while scheduling jobs.

v2: improve commit message

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix always_valid bos multiple LRU insertions.

If these bos are evicted and are in the validated list
things blow up, so do not put them in there. Notably,
that tries to add the bo to the LRU twice, which results
in a BUG_ON in ttm_bo.c.

While for the bo_list an alternative would be to not allow
always valid bos in there, that does not work for the user
fence.

v2: Fixed whitespace issue pointed out by checkpatch.pl

Signed-off-by: Bas Nieuwenhuizen <basni@chromium.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Revert "drm/amdgpu/gfx8: Fix compute ring failure after resetting"

This reverts commit 75737cb4eb78c7f185e4700b4aa20cf7a3381aca.

Fixes compute rings test failure on bare metal during full GPU reset.

RCA:
the ring buffer has to be filled with valid packets (such as NOPs) first
before submitting MAP_QUEUEs packet into KIQ. Once a compute engine is mapped,
it will immediately execute the ring buffer if the RTPR is not equal to the
WTPR from the MQD. It could lead to engine hang if the ring buffer filled
with random data.

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move waiting for VM flush into gmc_v9_0_emit_flush_gpu_tlb

Keep that at a common place instead of spread over all engines.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: implement vcn_v1_0_(dec|enc)_ring_emit_reg_wait v2

Add emit_reg_wait implementation for VCN v1.

v2: cleanup the existing code as well

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: implement vce_v4_0_emit_reg_wait v2

Add emit_reg_wait implementation for VCE v4.

v2: call new function directly from existing code

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: implement uvd_v7_0_(enc_|)ring_emit_reg_wait v2

Add emit_reg_wait implementation for UVD v7.

v2: call new function directly from the existing code

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: implement sdma_v4_0_ring_emit_reg_wait

Add emit_reg_wait implementation for SDMA v4.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: implement gfx_v9_0_ring_emit_reg_wait

Implement emit_reg_wait for gfx v9.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add new emit_reg_wait callback

Allows us to wait for a register value/mask on a ring.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix DW estimation on VI

Forgot to update that during recent changes.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Fix sysfs pp_dpm_pcie bug on CI/VI

when echo "01">pp_dpm_pcie
the pcie dpm will fix in highest link speed.
But user should expect auto speed between
level 0 and level1

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Enable pp_set_power_profile_mode under manual mode

Only user enter manual performance mode, driver allow user
configure the sclk/mclk dpm parameters through sysfs
pp_power_profile_mode.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Refine pp_dpm_force_clock_level functions

Only when user set manual performance mode, driver
enable pp_dpm_force_clock_level.
so check the mode in pp_dpm_force_clock_level,
and delete the same logic in callback functions.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Delete debug info when set power_profile_mode

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: limit the VM address space with older VCE FW versions

Older VCE FW versions are buggy and can't work with 48bit address
spaces.

RFC: Should we limit the address space or just reject loading the older
VCE firmware?

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm: Fix trailing semicolon

The trailing semicolon is an empty statement that does no operation.
Removing it since it doesn't do anything.

Signed-off-by: Luis de Bethencourt <luisbg@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm: amd: Fix trailing semicolons

The trailing semicolon is an empty statement that does no operation.
Removing the two instances of them since they don't do anything.

Signed-off-by: Luis de Bethencourt <luisbg@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: set DRIVER_ATOMIC flag early

The atomic debugfs stuff gets created in drm_dev_alloc()
but this gets called before we've enumerated all of our
IPs, so move the DRIVER_ATOMIC flag setting to fix that.

Since DRIVER_ATOMIC is a driver flag it's currently global
to the driver so setting it affects all GPUs driven by the
driver.  Unfortunately, not all GPUs support atomic.  Warn
the user if that is the case.

This is the same as our current behavior, but at least the
atomic debugfs stuff gets created now.

Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove DC special casing for KB/ML

It seems to be working now.

Bug: https://bugs.freedesktop.org/show_bug.cgi?id=102372
Reviewed-by: Mike Lothian <mike@fireburn.co.uk>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: Simplify ttm_dma_page_put()

Remove redundant store of return code.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: Fix coding style in ttm_dma_pool_alloc_new_pages()

Add missing {} braces.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: Fix coding style in ttm_tt_swapout()

Add missing {} braces.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>