blk-integrity: convert to struct device_attribute

An upcoming patch will register the integrity attributes directly with
the struct device kobject.
For this the attributes have to be implemented in terms of
struct device_attribute.

Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20230309-kobj_release-gendisk_integrity-v3-2-ceccb4493c46@weissschuh.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-integrity: use sysfs_emit

The correct way to emit data into sysfs is via sysfs_emit(), use it.

Also perform some trivial syntactic cleanups.

Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20230309-kobj_release-gendisk_integrity-v3-1-ceccb4493c46@weissschuh.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block/drivers: remove dead clear of random flag

QUEUE_FLAG_ADD_RANDOM is not set before we clear it for "null_blk",
"brd", "nbd", "zram", and "bcache" since by default we don't set
"QUEUE_FLAG_ADD_RANDOM" to MQ ops.

Remove dead clear of QUEUE_FLAG_ADD_RANDOM in above listed drivers.

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> #zram
Link: https://lore.kernel.org/r/20230424234628.45544-2-kch@nvidia.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: sync part's ->bd_has_submit_bio with disk's

submit_bio() always uses bio->bi_bdev->bd_has_submit_bio to decide if
disk's ->submit_bio() is called, and bio->bi_bdev could point to one
partition device.

So we have to sync part bdev's ->bd_has_submit_bio with disk's.

Reported-by: Changhui Zhong <czhong@redhat.com>
Link: https://lore.kernel.org/linux-block/ZEdItaPqif8fp85H@ovpn-8-24.pek2.redhat.com/T/#t
Fixes: 9f4107b07b17 ("block: store bdev->bd_disk->fops->submit_bio state in bdev")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230425034154.110099-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: Cleanup set_capacity()/bdev_set_nr_sectors()

The code for setting a block device capacity (bd_nr_sectors field of
struct block_device) is duplicated in set_capacity() and
bdev_set_nr_sectors(). Clean this up by making bdev_set_nr_sectors()
a block layer internal function defined in block/bdev.c instead of
having this function statically defined in block/partitions/core.c.
With this change, set_capacity() implementation can be simplified to
only calling bdev_set_nr_sectors().

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230424131318.79935-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

nbd: fix incomplete validation of ioctl arg

We tested and found an alarm caused by nbd_ioctl arg without verification.
The UBSAN warning calltrace like below:

UBSAN: Undefined behaviour in fs/buffer.c:1709:35
signed integer overflow:
-9223372036854775808 - 1 cannot be represented in type 'long long int'
CPU: 3 PID: 2523 Comm: syz-executor.0 Not tainted 4.19.90 #1
Hardware name: linux,dummy-virt (DT)
Call trace:
 dump_backtrace+0x0/0x3f0 arch/arm64/kernel/time.c:78
 show_stack+0x28/0x38 arch/arm64/kernel/traps.c:158
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x170/0x1dc lib/dump_stack.c:118
 ubsan_epilogue+0x18/0xb4 lib/ubsan.c:161
 handle_overflow+0x188/0x1dc lib/ubsan.c:192
 __ubsan_handle_sub_overflow+0x34/0x44 lib/ubsan.c:206
 __block_write_full_page+0x94c/0xa20 fs/buffer.c:1709
 block_write_full_page+0x1f0/0x280 fs/buffer.c:2934
 blkdev_writepage+0x34/0x40 fs/block_dev.c:607
 __writepage+0x68/0xe8 mm/page-writeback.c:2305
 write_cache_pages+0x44c/0xc70 mm/page-writeback.c:2240
 generic_writepages+0xdc/0x148 mm/page-writeback.c:2329
 blkdev_writepages+0x2c/0x38 fs/block_dev.c:2114
 do_writepages+0xd4/0x250 mm/page-writeback.c:2344

The reason for triggering this warning is __block_write_full_page()
-> i_size_read(inode) - 1 overflow.
inode->i_size is assigned in __nbd_ioctl() -> nbd_set_size() -> bytesize.
We think it is necessary to limit the size of arg to prevent errors.

Moreover, __nbd_ioctl() -> nbd_add_socket(), arg will be cast to int.
Assuming the value of arg is 0x80000000000000001) (on a 64-bit machine),
it will become 1 after the coercion, which will return unexpected results.

Fix it by adding checks to prevent passing in too large numbers.

Signed-off-by: Zhong Jinghua <zhongjinghua@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20230206145805.2645671-1-zhongjinghua@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

ublk: don't return 0 in case of any failure

Commit 2d786e66c966 ("block: ublk: switch to ioctl command encoding")
starts to reset local variable of 'ret' as zero, then if any failure
happens when handling the three IO commands, 0 can be returned to ublk
server.

Fix it by returning -EINVAL in case of command handling failure.

Cc: Christoph Hellwig <hch@lst.de>
Fixes: 2d786e66c966 ("block: ublk: switch to ioctl command encoding")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230420091104.1092972-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

sed-opal: geometry feature reporting command

Locking range start and locking range length
attributes may be require to satisfy restrictions
exposed by OPAL2 geometry feature reporting.

Geometry reporting feature is described in TCG OPAL SSC,
section 3.1.1.4 (ALIGN, LogicalBlockSize, AlignmentGranularity
and LowestAlignedLBA).

4.3.5.2.1.1 RangeStart Behavior:

[ StartAlignment = (RangeStart modulo AlignmentGranularity) - LowestAlignedLBA ]

When processing a Set method or CreateRow method on the Locking
table for a non-Global Range row, if:

a) the AlignmentRequired (ALIGN above) column in the LockingInfo
   table is TRUE;
b) RangeStart is non-zero; and
c) StartAlignment is non-zero, then the method SHALL fail and
   return an error status code INVALID_PARAMETER.

4.3.5.2.1.2 RangeLength Behavior:

If RangeStart is zero, then
[ LengthAlignment = (RangeLength modulo AlignmentGranularity) - LowestAlignedLBA ]

If RangeStart is non-zero, then
[ LengthAlignment = (RangeLength modulo AlignmentGranularity) ]

When processing a Set method or CreateRow method on the Locking
table for a non-Global Range row, if:

a) the AlignmentRequired (ALIGN above) column in the LockingInfo
   table is TRUE;
b) RangeLength is non-zero; and
c) LengthAlignment is non-zero, then the method SHALL fail and
   return an error status code INVALID_PARAMETER

In userspace we stuck to logical block size reported by general
block device (via sysfs or ioctl), but we can not read
'AlignmentGranularity' or 'LowestAlignedLBA' anywhere else and
we need to get those values from sed-opal interface otherwise
we will not be able to report or avoid locking range setup
INVALID_PARAMETER errors above.

Signed-off-by: Ondrej Kozina <okozina@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Tested-by: Milan Broz <gmazyland@gmail.com>
Link: https://lore.kernel.org/r/20230411090931.9193-2-okozina@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

null_blk: Always check queue mode setting from configfs

Make sure to check device queue mode in the null_validate_conf() and
return error for NULL_Q_RQ as we don't allow legacy I/O path, without
this patch we get OOPs when queue mode is set to 1 from configfs,
following are repro steps :-

modprobe null_blk nr_devices=0
mkdir config/nullb/nullb0
echo 1 > config/nullb/nullb0/memory_backed
echo 4096 > config/nullb/nullb0/blocksize
echo 20480 > config/nullb/nullb0/size
echo 1 > config/nullb/nullb0/queue_mode
echo 1 > config/nullb/nullb0/power

Entering kdb (current=0xffff88810acdd080, pid 2372) on processor 42 Oops: (null)
due to oops @ 0xffffffffc041c329
CPU: 42 PID: 2372 Comm: sh Tainted: G           O     N 6.3.0-rc5lblk+ #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
RIP: 0010:null_add_dev.part.0+0xd9/0x720 [null_blk]
Code: 01 00 00 85 d2 0f 85 a1 03 00 00 48 83 bb 08 01 00 00 00 0f 85 f7 03 00 00 80 bb 62 01 00 00 00 48 8b 75 20 0f 85 6d 02 00 00 <48> 89 6e 60 48 8b 75 20 bf 06 00 00 00 e8 f5 37 2c c1 48 8b 75 20
RSP: 0018:ffffc900052cbde0 EFLAGS: 00010246
RAX: 0000000000000001 RBX: ffff88811084d800 RCX: 0000000000000001
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff888100042e00
RBP: ffff8881053d8200 R08: ffffc900052cbd68 R09: ffff888105db2000
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000002
R13: ffff888104765200 R14: ffff88810eec1748 R15: ffff88810eec1740
FS:  00007fd445fd1740(0000) GS:ffff8897dfc80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000060 CR3: 0000000166a00000 CR4: 0000000000350ee0
DR0: ffffffff8437a488 DR1: ffffffff8437a489 DR2: ffffffff8437a48a
DR3: ffffffff8437a48b DR6: 00000000ffff0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 nullb_device_power_store+0xd1/0x120 [null_blk]
 configfs_write_iter+0xb4/0x120
 vfs_write+0x2ba/0x3c0
 ksys_write+0x5f/0xe0
 do_syscall_64+0x3b/0x90
 entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7fd4460c57a7
Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
RSP: 002b:00007ffd3792a4a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007fd4460c57a7
RDX: 0000000000000002 RSI: 000055b43c02e4c0 RDI: 0000000000000001
RBP: 000055b43c02e4c0 R08: 000000000000000a R09: 00007fd44615b4e0
R10: 00007fd44615b3e0 R11: 0000000000000246 R12: 0000000000000002
R13: 00007fd446198520 R14: 0000000000000002 R15: 00007fd446198700
 </TASK>

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Link: https://lore.kernel.org/r/20230416220339.43845-1-kch@nvidia.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: ublk: switch to ioctl command encoding

All ublk commands(control, IO) should have taken ioctl command encoding
from the beginning, because ioctl command encoding defines each code
uniquely, so driver can figure out wrong command sent from userspace
easily; 2) it might help security subsystem for audit uring cmd[1].

Unfortunately we didn't do that way, and it could be one lesson for
ublk driver.

So switch to ioctl command encoding now, we still support commands encoded
in old way, but they become legacy definition. Any new command should take
ioctl encoding.

See ublksrv code for switching to ioctl command encoding in [2].

[1] https://lore.kernel.org/io-uring/CAHC9VhSVzujW9LOj5Km80AjU0EfAuukoLrxO6BEfnXeK_s6bAg@mail.gmail.com/
[2] https://github.com/ming1/ubdsrv/commits/ioctl_cmd_encoding

Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ken Kurematsu <k.kurematsu@nskint.co.jp>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230418131810.855959-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: fix the blk_mq_add_to_requeue_list call in blk_kick_flush

Commit b12e5c6c755a accidentally changes blk_kick_flush to do a head
insert into the requeue list, fix this up.

Fixes: b12e5c6c755a ("blk-mq: pass a flags argument to blk_mq_add_to_requeue_list")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230416073553.966161-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block, bfq: Fix division by zero error on zero wsum

When the weighted sum is zero the calculation of limit causes
a division by zero error. Fix this by continuing to the next level.

This was discovered by running as root:

stress-ng --ioprio 0

Fixes divison by error oops:

[  521.450556] divide error: 0000 [#1] SMP NOPTI
[  521.450766] CPU: 2 PID: 2684464 Comm: stress-ng-iopri Not tainted 6.2.1-1280.native #1
[  521.451117] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014
[  521.451627] RIP: 0010:bfqq_request_over_limit+0x207/0x400
[  521.451875] Code: 01 48 8d 0c c8 74 0b 48 8b 82 98 00 00 00 48 8d 0c c8 8b 85 34 ff ff ff 48 89 ca 41 0f af 41 50 48 d1 ea 48 98 48 01 d0 31 d2 <48> f7 f1 41 39 41 48 89 85 34 ff ff ff 0f 8c 7b 01 00 00 49 8b 44
[  521.452699] RSP: 0018:ffffb1af84eb3948 EFLAGS: 00010046
[  521.452938] RAX: 000000000000003c RBX: 0000000000000000 RCX: 0000000000000000
[  521.453262] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb1af84eb3978
[  521.453584] RBP: ffffb1af84eb3a30 R08: 0000000000000001 R09: ffff8f88ab8a4ba0
[  521.453905] R10: 0000000000000000 R11: 0000000000000001 R12: ffff8f88ab8a4b18
[  521.454224] R13: ffff8f8699093000 R14: 0000000000000001 R15: ffffb1af84eb3970
[  521.454549] FS:  00005640b6b0b580(0000) GS:ffff8f88b3880000(0000) knlGS:0000000000000000
[  521.454912] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  521.455170] CR2: 00007ffcbcae4e38 CR3: 00000002e46de001 CR4: 0000000000770ee0
[  521.455491] PKRU: 55555554
[  521.455619] Call Trace:
[  521.455736]  <TASK>
[  521.455837]  ? bfq_request_merge+0x3a/0xc0
[  521.456027]  ? elv_merge+0x115/0x140
[  521.456191]  bfq_limit_depth+0xc8/0x240
[  521.456366]  __blk_mq_alloc_requests+0x21a/0x2c0
[  521.456577]  blk_mq_submit_bio+0x23c/0x6c0
[  521.456766]  __submit_bio+0xb8/0x140
[  521.457236]  submit_bio_noacct_nocheck+0x212/0x300
[  521.457748]  submit_bio_noacct+0x1a6/0x580
[  521.458220]  submit_bio+0x43/0x80
[  521.458660]  ext4_io_submit+0x23/0x80
[  521.459116]  ext4_do_writepages+0x40a/0xd00
[  521.459596]  ext4_writepages+0x65/0x100
[  521.460050]  do_writepages+0xb7/0x1c0
[  521.460492]  __filemap_fdatawrite_range+0xa6/0x100
[  521.460979]  file_write_and_wait_range+0xbf/0x140
[  521.461452]  ext4_sync_file+0x105/0x340
[  521.461882]  __x64_sys_fsync+0x67/0x100
[  521.462305]  ? syscall_exit_to_user_mode+0x2c/0x1c0
[  521.462768]  do_syscall_64+0x3b/0xc0
[  521.463165]  entry_SYSCALL_64_after_hwframe+0x5a/0xc4
[  521.463621] RIP: 0033:0x5640b6c56590
[  521.464006] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 80 3d 71 70 0e 00 00 74 17 b8 4a 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 48 c3 0f 1f 80 00 00 00 00 48 83 ec 18 89 7c

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20230413133009.1605335-1-colin.i.king@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

fault-inject: fix build error when FAULT_INJECTION_CONFIGFS=y and CONFIGFS_FS=m

This fixes a build error when CONFIG_FAULT_INJECTION_CONFIGFS=y and
CONFIG_CONFIGFS_FS=m.

Since the fault-injection library cannot built as a module, avoid building
configfs as a module.

Fixes: 4668c7a2940d ("fault-inject: allow configuration via configfs")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202304150025.K0hczLR4-lkp@intel.com/
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: store bdev->bd_disk->fops->submit_bio state in bdev

We have a long chain of memory dereferencing just to whether or not
this disk has a special submit_bio helper. As that's not necessarily
the common case, add a bd_has_submit_bio state in the bdev to avoid
traversing this memory dependency chain if we don't need to.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: re-arrange the struct block_device fields for better layout

This moves struct device out-of-line as it's just used at open/close
time, so we can keep some of the commonly used fields closer together.
On a standard setup, it also reduces the size from 864 bytes to 848
bytes. Yes, struct device is a pig...

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge branch 'md-next' of https://git./linux/kernel/git/song/md into for-6.4/block

Pull MD updates from Song:

"- md/bitmap: Optimal last page size, by Jon Derrick
 - Various raid10 fixes, by Yu Kuai and Li Nan
 - md: add error_handlers for raid0 and linear, by Mariusz Tkaczyk"

* 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
  md/raid5: remove unused working_disks variable
  md/raid10: don't call bio_start_io_acct twice for bio which experienced read error
  md/raid10: fix memleak of md thread
  md/raid10: fix memleak for 'conf->bio_split'
  md/raid10: fix leak of 'r10bio->remaining' for recovery
  md/raid10: don't BUG_ON() in raise_barrier()
  md: fix soft lockup in status_resync
  md: add error_handlers for raid0 and linear
  md: Use optimal I/O size for last bitmap page
  md: Fix types in sb writer
  md: Move sb writer loop to its own function
  md/raid10: Fix typo in comment (replacment -> replacement)
  md: make kobj_type structures constant
  md/raid10: fix null-ptr-deref in raid10_sync_request
  md/raid10: fix task hung in raid10d

Merge tag 'nvme-6.4-2023-04-14' of git://git.infradead.org/nvme into for-6.4/block

Pull NVMe updates from Christoph:

"nvme updates for Linux 6.4

 - drop redundant pci_enable_pcie_error_reporting (Bjorn Helgaas)
 - validate nvmet module parameters (Chaitanya Kulkarni)
 - fence TCP socket on receive error (Chris Leech)
 - fix async event trace event (Keith Busch)
 - minor cleanups (Chaitanya Kulkarni, zhenwei pi)
 - fix and cleanup nvmet Identify handling (Damien Le Moal,
   Christoph Hellwig)
 - fix double blk_mq_complete_request race in the timeout handler
   (Lei Yin)
 - fix irq locking in nvme-fcloop (Ming Lei)
 - remove queue mapping helper for rdma devices (Sagi Grimberg)"

* tag 'nvme-6.4-2023-04-14' of git://git.infradead.org/nvme:
  nvme-fcloop: fix "inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage"
  blk-mq-rdma: remove queue mapping helper for rdma devices
  nvme-rdma: minor cleanup in nvme_rdma_create_cq()
  nvme: fix double blk_mq_complete_request for timeout request with low probability
  nvme: fix async event trace event
  nvme-apple: return directly instead of else
  nvme-apple: return directly instead of else
  nvmet-tcp: validate idle poll modparam value
  nvmet-tcp: validate so_priority modparam value
  nvme-tcp: fence TCP socket on receive error
  nvmet: remove nvmet_req_cns_error_complete
  nvmet: rename nvmet_execute_identify_cns_cs_ns
  nvmet: fix Identify Identification Descriptor List handling
  nvmet: cleanup nvmet_execute_identify()
  nvmet: fix I/O Command Set specific Identify Controller
  nvmet: fix Identify Active Namespace ID list handling
  nvmet: fix Identify Controller handling
  nvmet: fix Identify Namespace handling
  nvmet: fix error handling in nvmet_execute_identify_cns_cs_ns()
  nvme-pci: drop redundant pci_enable_pcie_error_reporting()

md/raid5: remove unused working_disks variable

clang with W=1 reports
drivers/md/raid5.c:7719:6: error: variable 'working_disks'
  set but not used [-Werror,-Wunused-but-set-variable]
        int working_disks = 0;
            ^
This variable is not used so remove it.

Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230327132324.1769595-1-trix@redhat.com

md/raid10: don't call bio_start_io_acct twice for bio which experienced read error

handle_read_error() will resumit r10_bio by raid10_read_request(), which
will call bio_start_io_acct() again, while bio_end_io_acct() will only
be called once.

Fix the problem by don't account io again from handle_read_error().

Fixes: 528bc2cf2fcc ("md/raid10: enable io accounting")
Suggested-by: Song Liu <song@kernel.org>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230314012258.2395894-1-yukuai1@huaweicloud.com

md/raid10: fix memleak of md thread

In raid10_run(), if setup_conf() succeed and raid10_run() failed before
setting 'mddev->thread', then in the error path 'conf->thread' is not
freed.

Fix the problem by setting 'mddev->thread' right after setup_conf().

Fixes: 43a521238aca ("md-cluster: choose correct label when clustered layout is not supported")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230310073855.1337560-7-yukuai1@huaweicloud.com

md/raid10: fix memleak for 'conf->bio_split'

In the error path of raid10_run(), 'conf' need be freed, however,
'conf->bio_split' is missed and memory will be leaked.

Since there are 3 places to free 'conf', factor out a helper to fix the
problem.

Fixes: fc9977dd069e ("md/raid10: simplify the splitting of requests.")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230310073855.1337560-6-yukuai1@huaweicloud.com

md/raid10: fix leak of 'r10bio->remaining' for recovery

raid10_sync_request() will add 'r10bio->remaining' for both rdev and
replacement rdev. However, if the read io fails, recovery_request_write()
returns without issuing the write io, in this case, end_sync_request()
is only called once and 'remaining' is leaked, cause an io hang.

Fix the problem by decreasing 'remaining' according to if 'bio' and
'repl_bio' is valid.

Fixes: 24afd80d99f8 ("md/raid10: handle recovery of replacement devices.")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230310073855.1337560-5-yukuai1@huaweicloud.com

md/raid10: don't BUG_ON() in raise_barrier()

If raise_barrier() is called the first time in raid10_sync_request(), which
means the first non-normal io is handled, raise_barrier() should wait for
all dispatched normal io to be done. This ensures that normal io won't
starve.

However, BUG_ON() if this is broken is too aggressive. This patch replace
BUG_ON() with WARN and fall back to not force.

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230310073855.1337560-4-yukuai1@huaweicloud.com

md: fix soft lockup in status_resync

status_resync() will calculate 'curr_resync - recovery_active' to show
user a progress bar like following:

[============>........]  resync = 61.4%

'curr_resync' and 'recovery_active' is updated in md_do_sync(), and
status_resync() can read them concurrently, hence it's possible that
'curr_resync - recovery_active' can overflow to a huge number. In this
case status_resync() will be stuck in the loop to print a large amount
of '=', which will end up soft lockup.

Fix the problem by setting 'resync' to MD_RESYNC_ACTIVE in this case,
this way resync in progress will be reported to user.

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230310073855.1337560-3-yukuai1@huaweicloud.com

md: add error_handlers for raid0 and linear

After the commit 9631abdbf406c("md: Set MD_BROKEN for RAID1 and RAID10")
MD_BROKEN must be set if array is failed because state_store() checks it.
If it is set then -EBUSY is returned to userspace.

For raid0 and linear MD_BROKEN is not set by error_handler(). As a result
mdadm is unable to trigger clean-up actions. It is a regression.

This patch adds appropriate error_handler for raid0 and linear. The
error handler sets MD_BROKEN for this device.

Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230306130317.3418-1-mariusz.tkaczyk@linux.intel.com

md: Use optimal I/O size for last bitmap page

If the bitmap space has enough room, size the I/O for the last bitmap
page write to the optimal I/O size for the storage device. The expanded
write is checked that it won't overrun the data or metadata.

The drive this was tested against has higher latencies when there are
sub-4k writes due to device-side read-mod-writes of its atomic 4k write
unit. This change helps increase performance by sizing the last bitmap
page I/O for the device's preferred write unit, if it is given.

Example Intel/Solidigm P5520
Raid10, Chunk-size 64M, bitmap-size 57228 bits

$ mdadm --create /dev/md0 --level=10 --raid-devices=4 /dev/nvme{0,1,2,3}n1
        --assume-clean --bitmap=internal --bitmap-chunk=64M
$ fio --name=test --direct=1 --filename=/dev/md0 --rw=randwrite --bs=4k --runtime=60

Without patch:
  write: IOPS=1676, BW=6708KiB/s (6869kB/s)(393MiB/60001msec); 0 zone resets

With patch:
  write: IOPS=15.7k, BW=61.4MiB/s (64.4MB/s)(3683MiB/60001msec); 0 zone resets

Biosnoop:
Without patch:
Time        Process        PID     Device      LBA        Size      Lat
1.410377    md0_raid10     6900    nvme0n1   W 16         4096      0.02
1.410387    md0_raid10     6900    nvme2n1   W 16         4096      0.02
1.410374    md0_raid10     6900    nvme3n1   W 16         4096      0.01
1.410381    md0_raid10     6900    nvme1n1   W 16         4096      0.02
1.410411    md0_raid10     6900    nvme1n1   W 115346512  4096      0.01
1.410418    md0_raid10     6900    nvme0n1   W 115346512  4096      0.02
1.410915    md0_raid10     6900    nvme2n1   W 24         3584      0.43 <--
1.410935    md0_raid10     6900    nvme3n1   W 24         3584      0.45 <--
1.411124    md0_raid10     6900    nvme1n1   W 24         3584      0.64 <--
1.411147    md0_raid10     6900    nvme0n1   W 24         3584      0.66 <--
1.411176    md0_raid10     6900    nvme3n1   W 2019022184 4096      0.01
1.411189    md0_raid10     6900    nvme2n1   W 2019022184 4096      0.02

With patch:
Time        Process        PID     Device      LBA        Size      Lat
5.747193    md0_raid10     727     nvme0n1   W 16         4096      0.01
5.747192    md0_raid10     727     nvme1n1   W 16         4096      0.02
5.747195    md0_raid10     727     nvme3n1   W 16         4096      0.01
5.747202    md0_raid10     727     nvme2n1   W 16         4096      0.02
5.747229    md0_raid10     727     nvme3n1   W 1196223704 4096      0.02
5.747224    md0_raid10     727     nvme0n1   W 1196223704 4096      0.01
5.747279    md0_raid10     727     nvme0n1   W 24         4096      0.01 <--
5.747279    md0_raid10     727     nvme1n1   W 24         4096      0.02 <--
5.747284    md0_raid10     727     nvme3n1   W 24         4096      0.02 <--
5.747291    md0_raid10     727     nvme2n1   W 24         4096      0.02 <--
5.747314    md0_raid10     727     nvme2n1   W 2234636712 4096      0.01
5.747317    md0_raid10     727     nvme1n1   W 2234636712 4096      0.02

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jon Derrick <jonathan.derrick@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230224183323.638-4-jonathan.derrick@linux.dev

md: Fix types in sb writer

Page->index is a pgoff_t and multiplying could cause overflows on a
32-bit architecture. In the sb writer, this is used to calculate and
verify the sector being used, and is multiplied by a sector value. Using
sector_t will cast it to a u64 type and is the more appropriate type for
the unit. Additionally, the integer size unit is converted to a sector
unit in later calculations, and is now corrected to be an unsigned type.

Finally, clean up the calculations using variable aliases to improve
readabiliy.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jon Derrick <jonathan.derrick@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230224183323.638-3-jonathan.derrick@linux.dev

md: Move sb writer loop to its own function

Preparatory patch for optimal I/O size calculation. Move the sb writer
loop routine into its own function for clarity.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jon Derrick <jonathan.derrick@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230224183323.638-2-jonathan.derrick@linux.dev

md/raid10: Fix typo in comment (replacment -> replacement)

Replace replacment with replacement.

Signed-off-by: Jiangshan Yi <yijiangshan@kylinos.cn>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230214064013.2373851-1-yijiangshan@kylinos.cn

md: make kobj_type structures constant

Since commit ee6d3dd4ed48 ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.

Take advantage of this to constify the structure definitions to prevent
modification at runtime.

Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230214-kobj_type-md-v1-1-d6853f707f11@weissschuh.net

md/raid10: fix null-ptr-deref in raid10_sync_request

init_resync() inits mempool and sets conf->have_replacemnt at the beginning
of sync, close_sync() frees the mempool when sync is completed.

After [1] recovery might be skipped and init_resync() is called but
close_sync() is not. null-ptr-deref occurs with r10bio->dev[i].repl_bio.

The following is one way to reproduce the issue.

  1) create a array, wait for resync to complete, mddev->recovery_cp is set
     to MaxSector.
  2) recovery is woken and it is skipped. conf->have_replacement is set to
     0 in init_resync(). close_sync() not called.
  3) some io errors and rdev A is set to WantReplacement.
  4) a new device is added and set to A's replacement.
  5) recovery is woken, A have replacement, but conf->have_replacemnt is
     0. r10bio->dev[i].repl_bio will not be alloced and null-ptr-deref
     occurs.

Fix it by not calling init_resync() if recovery skipped.

[1] commit 7e83ccbecd60 ("md/raid10: Allow skipping recovery when clean arrays are assembled")
Fixes: 7e83ccbecd60 ("md/raid10: Allow skipping recovery when clean arrays are assembled")
Cc: stable@vger.kernel.org
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230222041000.3341651-3-linan666@huaweicloud.com

md/raid10: fix task hung in raid10d

commit fe630de009d0 ("md/raid10: avoid deadlock on recovery.") allowed
normal io and sync io to exist at the same time. Task hung will occur as
below:

T1                      T2 T3 T4
raid10d
 handle_read_error
  allow_barrier
   conf->nr_pending--
    -> 0
                        //submit sync io
                        raid10_sync_request
                         raise_barrier
  ->will not be blocked
  ...
//submit to drivers
  raid10_read_request
   wait_barrier
    conf->nr_pending++
     -> 1
//retry read fail
raid10_end_read_request
 reschedule_retry
  add to retry_list
  conf->nr_queued++
   -> 1
//sync io fail
end_sync_read
 __end_sync_read
  reschedule_retry
   add to retry_list
                    conf->nr_queued++
     -> 2
 ...
 handle_read_error
 get form retry_list
 conf->nr_queued--
  freeze_array
   wait nr_pending == nr_queued+1
        ->1       ->2
   //task hung

retry read and sync io will be added to retry_list(nr_queued->2) if they
fails. raid10d() called handle_read_error() and hung in freeze_array().
nr_queued will not decrease because raid10d is blocked, nr_pending will
not increase because conf->barrier is not released.

Fix it by moving allow_barrier() after raid10_read_request().
raise_barrier() will wait for nr_waiting to become 0. Therefore, sync io
and regular io will not be issued at the same time.

Also remove the check of nr_queued in stop_waiting_barrier. It can be 0
but don't need to be blocking. Remove the check for MD_RECOVERY_RUNNING as
the check is redundent.

Fixes: fe630de009d0 ("md/raid10: avoid deadlock on recovery.")
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230222041000.3341651-2-linan666@huaweicloud.com

block: null_blk: make fault-injection dynamically configurable per device

The null_blk driver has multiple driver-specific fault injection
mechanisms.  Each fault injection configuration can only be specified by a
module parameter and cannot be reconfigured without reloading the driver.
Also, each configuration is common to all devices and is initialized every
time a new device is added.

This change adds the following subdirectories for each null_blk device.

/sys/kernel/config/nullb/<disk>/timeout_inject
/sys/kernel/config/nullb/<disk>/requeue_inject
/sys/kernel/config/nullb/<disk>/init_hctx_fault_inject

Each fault injection attribute can be dynamically set per device by a
corresponding file in these directories.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Link: https://lore.kernel.org/r/20230327143733.14599-3-akinobu.mita@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

fault-inject: allow configuration via configfs

This provides a helper function to allow configuration of fault-injection
for configfs-based drivers.

The config items created by this function have the same interface as the
one created under debugfs by fault_create_debugfs_attr().

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Link: https://lore.kernel.org/r/20230327143733.14599-2-akinobu.mita@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: remove __blk_mq_run_hw_queue

__blk_mq_run_hw_queue just contains a WARN_ON_ONCE for calls from
interrupt context and a blk_mq_run_dispatch_ops-protected call to
blk_mq_sched_dispatch_requests.  Open code the call to
blk_mq_sched_dispatch_requests in both callers, and move the WARN_ON_ONCE
to blk_mq_run_hw_queue where it can be extended to all !async calls,
while the other call is from workqueue context and thus obviously does
not need the assert.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413060651.694656-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: move the !async handling out of __blk_mq_delay_run_hw_queue

Only blk_mq_run_hw_queue can call __blk_mq_delay_run_hw_queue with
async=false, so move the handling there.

With this __blk_mq_delay_run_hw_queue can be merged into
blk_mq_delay_run_hw_queue.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413060651.694656-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: move the blk_mq_hctx_stopped check in __blk_mq_delay_run_hw_queue

For the in-context dispatch, blk_mq_hctx_stopped is alredy checked in
blk_mq_sched_dispatch_requests under blk_mq_run_dispatch_ops() protection.
For the async dispatch case having a check before scheduling the work
still makes sense to avoid needless workqueue scheduling, so just keep it
for that case.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413060651.694656-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: remove the blk_mq_hctx_stopped check in blk_mq_run_work_fn

blk_mq_hctx_stopped is already checked in blk_mq_sched_dispatch_requests
under blk_mq_run_dispatch_ops() protection, so remove the duplicate check.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413060651.694656-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: cleanup __blk_mq_sched_dispatch_requests

__blk_mq_sched_dispatch_requests currently has duplicated logic
for the cases where requests are on the hctx dispatch list or not.
Merge the two with a new need_dispatch variable and remove a few
pointless local variables.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413060651.694656-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: pass a flags argument to blk_mq_add_to_requeue_list

Replace the boolean at_head argument with the same flags that are already
passed to blk_mq_insert_request.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-21-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: pass a flags argument to elevator_type->insert_requests

Instead of passing a bool at_head, pass down the full flags from the
blk_mq_insert_request interface.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-20-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: pass a flags argument to blk_mq_request_bypass_insert

Replace the boolean at_head argument with the same flags that are already
passed to blk_mq_insert_request.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-19-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: pass a flags argument to blk_mq_insert_request

Replace the at_head bool with a flags argument that so far only contains
a single BLK_MQ_INSERT_AT_HEAD value.  This makes it much easier to grep
for head insertions into the blk-mq dispatch queues.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-18-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: don't kick the requeue_list in blk_mq_add_to_requeue_list

blk_mq_add_to_requeue_list takes a bool parameter to control how to kick
the requeue list at the end of the function.  Move the call to
blk_mq_kick_requeue_list to the callers that want it instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: don't run the hw_queue from blk_mq_request_bypass_insert

blk_mq_request_bypass_insert takes a bool parameter to control how to run
the queue at the end of the function.  Move the blk_mq_run_hw_queue call
to the callers that want it instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: don't run the hw_queue from blk_mq_insert_request

blk_mq_insert_request takes two bool parameters to control how to run
the queue at the end of the function.  Move the blk_mq_run_hw_queue call
to the callers that want it instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: fold __blk_mq_try_issue_directly into its two callers

Due to the wildly different behavior based on the bypass_insert argument,
not a whole lot of code in __blk_mq_try_issue_directly is actually shared
between blk_mq_try_issue_directly and blk_mq_request_issue_directly.

Remove __blk_mq_try_issue_directly and fold the code into the two callers
instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: factor out a blk_mq_get_budget_and_tag helper

Factor out a helper from __blk_mq_try_issue_directly in preparation
of folding that function into its two callers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-13-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: refactor the DONTPREP/SOFTBARRIER andling in blk_mq_requeue_work

Split the RQF_DONTPREP and RQF_SOFTBARRIER in separate branches to make
the code more readable.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: refactor passthrough vs flush handling in blk_mq_insert_request

While both passthrough and flush requests call directly into
blk_mq_request_bypass_insert, the parameters aren't the same.
Split the handling into two separate conditionals and turn the whole
function into an if/elif/elif/else flow instead of the gotos.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: remove blk_flush_queue_rq

Just call blk_mq_add_to_requeue_list directly from the two callers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: fold __blk_mq_insert_req_list into blk_mq_insert_request

Remove this very small helper and fold it into the only caller.

Note that this moves the trace_block_rq_insert out of ctx->lock, matching
the other calls to this tracepoint.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: fold __blk_mq_insert_request into blk_mq_insert_request

There is no good point in keeping the __blk_mq_insert_request around
for two function calls and a singler caller.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: move blk_mq_sched_insert_request to blk-mq.c

blk_mq_sched_insert_request is the main request insert helper and not
directly I/O scheduler related.  Move blk_mq_sched_insert_request to
blk-mq.c, rename it to blk_mq_insert_request and mark it static.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: fold blk_mq_sched_insert_requests into blk_mq_dispatch_plug_list

blk_mq_dispatch_plug_list is the only caller of
blk_mq_sched_insert_requests, and it makes sense to just fold it there
as blk_mq_sched_insert_requests isn't specific to I/O schedulers despite
the name.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: move more logic into blk_mq_insert_requests

Move all logic related to the direct insert (including the call to
blk_mq_run_hw_queue) into blk_mq_insert_requests to streamline the code
flow up a bit, and to allow marking blk_mq_try_issue_list_directly
static.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: include <linux/blk-mq.h> in block/blk-mq.h

block/blk-mq.h needs various definitions from <linux/blk-mq.h>,
include it there instead of relying on the source files to include
both.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: remove blk-mq-tag.h

blk-mq-tag.h is always included by blk-mq.h, and causes recursive
inclusion hell with further changes.  Just merge it into blk-mq.h
instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: don't plug for head insertions in blk_execute_rq_nowait

Plugs never insert at head, so don't plug for head insertions.

Fixes: 1c2d2fff6dc0 ("block: wire-up support for passthrough plugging")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-throttle: only enable blk-stat when BLK_DEV_THROTTLING_LOW

blk_throtl_register() will unconditionally enable blk-stat for gendisk
when register, even when we have no BLK_DEV_THROTTLING_LOW config.

Since the kernel always has only BLK_DEV_THROTTLING config and the
BLK_DEV_THROTTLING_LOW config is still in EXPERIMENTAL state, we can
just skip blk-stat when !BLK_DEV_THROTTLING_LOW.

Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230413062805.2081970-2-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-stat: fix QUEUE_FLAG_STATS clear

We need to set QUEUE_FLAG_STATS for two cases:
1. blk_stat_enable_accounting()
2. blk_stat_add_callback()

So we should clear it only when ((q->stats->accounting == 0) &&
list_empty(&q->stats->callbacks)).

blk_stat_disable_accounting() only check if q->stats->accounting
is 0 before clear the flag, this patch fix it.

Also add list_empty(&q->stats->callbacks)) check when enable, or
the flag is already set.

The bug can be reproduced on kernel without BLK_DEV_THROTTLING
(since it unconditionally enable accounting, see the next patch).

  # cat /sys/block/sr0/queue/scheduler
  none mq-deadline [bfq]

  # cat /sys/kernel/debug/block/sr0/state
  SAME_COMP|IO_STAT|INIT_DONE|STATS|REGISTERED|NOWAIT|30

  # echo none > /sys/block/sr0/queue/scheduler

  # cat /sys/kernel/debug/block/sr0/state
  SAME_COMP|IO_STAT|INIT_DONE|REGISTERED|NOWAIT

  # cat /sys/block/sr0/queue/wbt_lat_usec
  75000

We can see that after changing elevator from "bfq" to "none",
"STATS" flag is lost even though WBT callback still need it.

Fixes: 68497092bde9 ("block: make queue stat accounting a reference")
Cc: <stable@vger.kernel.org> # v5.17+
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230413062805.2081970-1-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-iolatency: Make initialization lazy

Other rq_qos policies such as wbt and iocost are lazy-initialized when they
are configured for the first time for the device but iolatency is
initialized unconditionally from blkcg_init_disk() during gendisk init. Lazy
init is beneficial because rq_qos policies add runtime overhead when
initialized as every IO has to walk all registered rq_qos callbacks.

This patch switches iolatency to lazy initialization too so that it only
registered its rq_qos policy when it is first configured.

Note that there is a known race condition between blkcg config file writes
and del_gendisk() and this patch makes iolatency susceptible to it by
exposing the init path to race against the deletion path. However, that
problem already exists in iocost and is being worked on.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20230413000649.115785-5-tj@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-iolatency: s/blkcg_rq_qos/iolat_rq_qos/

The name was too generic given that there are multiple blkcg rq-qos
policies.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20230413000649.115785-4-tj@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blkcg: Restructure blkg_conf_prep() and friends

We want to support lazy init of rq-qos policies so that iolatency is enabled
lazily on configuration instead of gendisk initialization. The way blkg
config helpers are structured now is a bit awkward for that. Let's
restructure:

* blkcg_conf_open_bdev() is renamed to blkg_conf_open_bdev(). The blkcg_
  prefix was used because the bdev opening step is blkg-independent.
  However, the distinction is too subtle and confuses more than helps. Let's
  switch to blkg prefix so that it's consistent with the type and other
  helper names.

* struct blkg_conf_ctx now remembers the original input string and is always
  initialized by the new blkg_conf_init().

* blkg_conf_open_bdev() is updated to take a pointer to blkg_conf_ctx like
  blkg_conf_prep() and can be called multiple times safely. Instead of
  modifying the double pointer to input string directly,
  blkg_conf_open_bdev() now sets blkg_conf_ctx->body.

* blkg_conf_finish() is renamed to blkg_conf_exit() for symmetry and now
  must be called on all blkg_conf_ctx's which were initialized with
  blkg_conf_init().

Combined, this allows the users to either open the bdev first or do it
altogether with blkg_conf_prep() which will help implementing lazy init of
rq-qos policies.

blkg_conf_init/exit() will also be used implement synchronization against
device removal. This is necessary because iolat / iocost are configured
through cgroupfs instead of one of the files under /sys/block/DEVICE. As
cgroupfs operations aren't synchronized with block layer, the lazy init and
other configuration operations may race against device removal. This patch
makes blkg_conf_init/exit() used consistently for all cgroup-orginating
configurations making them a good place to implement explicit
synchronization.

Users are updated accordingly. No behavior change is intended by this patch.

v2: bfq wasn't updated in v1 causing a build error. Fixed.

v3: Update the description to include future use of blkg_conf_init/exit() as
    synchronization points.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yu Kuai <yukuai1@huaweicloud.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230413000649.115785-3-tj@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blkcg: Drop unnecessary RCU read [un]locks from blkg_conf_prep/finish()

Now that all RCU flavors have been combined either holding a spin lock,
disabling irq or disabling preemption implies RCU read lock, so there's no
need to use rcu_read_[un]lock() explicitly while holding queue_lock. This
shouldn't cause any behavior changes.

v2: Description updated. Leave __acquires/release on queue_lock alone.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230413000649.115785-2-tj@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

nvme-fcloop: fix "inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage"

fcloop_fcp_op() could be called from flush request's ->end_io(flush_end_io) in
which the spinlock of fq->mq_flush_lock is grabbed with irq saved/disabled.

So fcloop_fcp_op() can't call spin_unlock_irq(&tfcp_req->reqlock) simply
which enables irq unconditionally.

Fixes the warning by switching to spin_lock_irqsave()/spin_unlock_irqrestore()

Fixes: c38dbbfab1bc ("nvme-fcloop: fix inconsistent lock state warnings")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

blk-mq-rdma: remove queue mapping helper for rdma devices

No rdma device exposes its irq vectors affinity today. So the only
mapping that we have left, is the default blk_mq_map_queues, which
we fallback to anyways. Also fixup the only consumer of this helper
(nvme-rdma).

Remove this now dead code.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-rdma: minor cleanup in nvme_rdma_create_cq()

Before cleanup:
enum ib_poll_context poll_ctx;

if (nvme_rdma_poll_queue(queue)) {
        poll_ctx = IB_POLL_DIRECT;
        queue->ib_cq = ib_alloc_cq(ibdev, queue, queue->cq_size,
                                   comp_vector, poll_ctx);
} else {
        poll_ctx = IB_POLL_SOFTIRQ;
        queue->ib_cq = ib_cq_pool_get(ibdev, queue->cq_size,
                                      comp_vector, poll_ctx);
}

After cleanup:
if (nvme_rdma_poll_queue(queue))
        queue->ib_cq = ib_alloc_cq(ibdev, queue, queue->cq_size,
                                   comp_vector, IB_POLL_DIRECT);
else
        queue->ib_cq = ib_cq_pool_get(ibdev, queue->cq_size,
                                      comp_vector, IB_POLL_SOFTIRQ);

IB_POLL_SOFTIRQ/IB_POLL_SOFTIRQ gets used directly in function, this
seems more accessible.

Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme: fix double blk_mq_complete_request for timeout request with low probability

When nvme_cancel_tagset traverses all tagsets and executes
nvme_cancel_request, this request may be executing blk_mq_free_request
that is called by nvme_rdma_complete_timed_out/nvme_tcp_complete_timed_out.
When blk_mq_free_request executes to WRITE_ONCE(rq->state, MQ_RQ_IDLE) and
__blk_mq_free_request(rq), it will cause double blk_mq_complete_request for
this request, and it will cause a null pointer error in the second
execution of this function because rq->mq_hctx has set to NULL in first
execution.

Signed-off-by: Lei Yin <yinlei2@lenovo.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme: fix async event trace event

Mixing AER Event Type and Event Info has masking clashes. Just print the
event type, but also include the event info of the AER result in the
trace.

Fixes: 09bd1ff4b15143b ("nvme-core: add async event trace helper")
Reported-by: Nate Thornton <nate.thornton@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-apple: return directly instead of else

There is no need for the else when direct return is used at the end of
the function.

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-apple: return directly instead of else

There is no need for the else when direct return is used at the end of
the function.

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvmet-tcp: validate idle poll modparam value

The module parameter idle_poll_period_usecs is passed to the function
usecs_to_jiffies() which has following prototype and expect
idle_poll_period_usecs arg type to be unsigned int:-

unsigned long usecs_to_jiffies(const unsigned int u);

Use similar module parameter validation callback as previous patch.

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvmet-tcp: validate so_priority modparam value

The module parameter so_priority is passed to the function
sock_set_priority() which has following prototype and expect
priotity arg type to be u32:-

void sock_set_priority(struct sock *sk, u32 priority);

Add a module parameter validation callback to reject any negative
values for the so_priority as it is defigned as int. Use this
oppurtunity to update the module parameter description and print the
default value.

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-tcp: fence TCP socket on receive error

Ensure that no further socket reads occur after a receive processing
error, either from io_work being re-scheduled or nvme_tcp_poll.

Failing to do so can result in unrecognised PDU payloads or TCP stream
garbage being processed as a C2H data PDU, and potentially start copying
the payload to an invalid destination after looking up a request using a
bogus command id.

Signed-off-by: Chris Leech <cleech@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvmet: remove nvmet_req_cns_error_complete

Just fold it into the only caller.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>

nvmet: rename nvmet_execute_identify_cns_cs_ns

nvmet_execute_identify_ns_zns is a more descriptive name for the
function handling the "I/O Command Set Specific Identify Namespace
Data Structure for the Zoned Namespace Command Set".

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

nvmet: fix Identify Identification Descriptor List handling

The Identification Descriptor List CNS value does not check the CSI
value, so remove the code trying to handle it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

nvmet: cleanup nvmet_execute_identify()

Change the order of the cases in nvmet_execute_identify() main
switch-case to match the NVMe 2.0 specification order as defined in
table 273. This is also the increasing order of CNS values.

While at it, for clarity, make it explicit that identify with cns set
to NVME_ID_CNS_CS_NS does not support NVM command set specific data.

No functional changes are introduced by this cleanup.

Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvmet: fix I/O Command Set specific Identify Controller

For an identify command with cns set to NVME_ID_CNS_CS_CTRL, the NVMe
2.0 specification states that:

If the I/O Command Set specified by the CSI field does not have an
Identify Controller data structure, then the controller shall return
a zero filled data structure. If the host requests a data structure for
an I/O Command Set that the controller does not support, the controller
shall abort the command with a status code of Invalid Field in Command.

However, the current implementation of this identify command in
nvmet_execute_identify() only handles the ZNS command set, returning an
error for the NVM command set, which is not compliant with the
specifications as we do support this command set.

Fix this by:
1) Renaming nvmet_execute_identify_cns_cs_ctrl() to
   nvmet_execute_identify_ctrl_zns() to continue handling the
   ZNS command set as is.
2) Introduce a nvmet_execute_identify_ctrl_ns() helper to handle the
   NVM command set, returning a zero filled nvme_id_ctrl_nvm data
   structure.
3) Modify nvmet_execute_identify() to call these helpers based on
   the csi specified, returning an error for unsupported command sets.

Fixes: aaf2e048af27 ("nvmet: add ZBD over ZNS backend support")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvmet: fix Identify Active Namespace ID list handling

The identify command with cns set to NVME_ID_CNS_NS_ACTIVE_LIST does
not depend on the command set. The execution of this command should
thus not look at the csi field specified in the command. Simplify
nvmet_execute_identify() to directly call
nvmet_execute_identify_nslist() without the csi switch-case.

Fixes: ab5d0b38c047 ("nvmet: add Command Set Identifier support")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvmet: fix Identify Controller handling

The identify command with cns set to NVME_ID_CNS_CTRL does not depend on
the command set. The execution of this command should thus not look at
the csi specified in the command. Simplify nvmet_execute_identify() to
directly call nvmet_execute_identify_ctrl() without the csi switch-case.

Fixes: ab5d0b38c047 ("nvmet: add Command Set Identifier support")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvmet: fix Identify Namespace handling

The identify command with cns set to NVME_ID_CNS_NS does not directly
depend on the command set. The NVMe specifications is rather confusing
here as it appears that this command only applies to the NVM command
set. However, footnote 8 of Figure 273 in the NVMe 2.0 base
specifications clearly state that this command applies to NVM command
sets that support logical blocks, that is, NVM and ZNS. Both the NVM and
ZNS command set specifications also list this identify as mandatory.

The command handling should thus not look at the csi field since it is
defined as unused for this command. Given that we do not support the
KV command set, simply remove the csi switch-case for that command
handling and call directly nvmet_execute_identify_ns() in
nvmet_execute_identify().

Fixes: ab5d0b38c047 ("nvmet: add Command Set Identifier support")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvmet: fix error handling in nvmet_execute_identify_cns_cs_ns()

Nvme specifications state that:

If the I/O Command Set associated with the namespace identified by the
NSID field does not support the Identify Namespace data structure
specified by the CSI field, the controller shall abort the command with
a status code of Invalid Field in Command.

In other words, if nvmet_execute_identify_cns_cs_ns() is called for a
target with a block device that is not zoned, we should not return any
data and set the status to NVME_SC_INVALID_FIELD.

While at it, it is also better to revalidate the ns block devie *before*
checking if the block device is zoned, to ensure that
nvmet_execute_identify_cns_cs_ns() operates against updated device
characteristics.

Fixes: aaf2e048af27 ("nvmet: add ZBD over ZNS backend support")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-pci: drop redundant pci_enable_pcie_error_reporting()

pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages.  Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration, so the
driver doesn't need to do it itself.

Remove the redundant pci_enable_pcie_error_reporting() call from the
driver.  Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.

Note that this only controls ERR_* Messages from the device.  An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

s390/dasd: fix hanging blockdevice after request requeue

The DASD driver does not kick the requeue list when requeuing IO requests
to the blocklayer. This might lead to hanging blockdevice when there is
no other trigger for this.

Fix by automatically kick the requeue list when requeuing DASD requests
to the blocklayer.

Fixes: e443343e509a ("s390/dasd: blk-mq conversion")
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-8-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

s390/dasd: add autoquiesce event for start IO error

Add a check for errors in the start_io function that signal a not
working device. Trigger an autoquiesce event in that case.

Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-7-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

s390/dasd: add aq_timeouts autoquiesce trigger

Add a sysfs attribute aq_timeouts that controls after how many
timeouts a autoquiesce event might be triggered.

The default value is 32768 which is the maximum number of retries
for the DASD device driver DASD_RETRIES_MAX. This means that the
timeout trigger will never happen.

The default value for DASD retries is 255.
Setting the value to below 255 will trigger the timeout autoquiesce
event before an IO error is generated.

Also add the check for the configured amount of timeouts and trigger
an autoquiesce event if exceeded.

Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-6-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

s390/dasd: add aq_requeue sysfs attribute

Add a sysfs attribute to control if all IO requests will be requeued to
the blocklayer in case of an autoquiesce event or not.

A value of 1 means that in case of an autoquiesce event all IO requests
will be requeued to the blocklayer.

A value of 0 means that the device will only be stopped.

Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-5-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

s390/dasd: add aq_mask sysfs attribute

Add sysfs attribute that controls the DASD autoquiesce feature.
The autoquiesce is disabled when 0 is echoed to the attribute.

A value greater than 0 will enable the feature.
The aq_mask attribute will accept an unsigned integer and the value
will be interpreted as bitmask defining the trigger events that will
lead to an automatic quiesce.

The following autoquiesce triggers will currently be available:

DASD_EER_FATALERROR  1 - any final I/O error
DASD_EER_NOPATH      2 - no remaining paths for the device
DASD_EER_STATECHANGE 3 - a state change interrupt occurred
DASD_EER_PPRCSUSPEND 4 - the device is PPRC suspended
DASD_EER_NOSPC       5 - there is no space remaining on an ESE device
DASD_EER_TIMEOUT     6 - a certain amount of timeouts occurred
DASD_EER_STARTIO     7 - the IO start function encountered an error

The currently supported maximum value is 255.

Bit 31 is reserved for internal usage.
Bit 0 is not used.

Example:

 - deactivate autoquiesce
   $ echo 0 > /sys/bus/ccw/0.0.1234/aq_mask

 - enable autoquiesce for FATALERROR, NOPATH and TIMEOUT
   (0000 0000 0000 0000  0000 0000 0100 0110 => 70)
   $ echo 70 > /sys/bus/ccw/0.0.1234/aq_mask

Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-4-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

s390/dasd: add autoquiesce feature

Add the internal logic to check for autoquiesce triggers and handle
them.

Quiesce and resume are functions that tell Linux to stop/resume
issuing I/Os to a specific DASD.
The DASD driver allows a manual quiesce/resume via ioctl.

Autoquiesce will define an amount of triggers that will lead to
an automatic quiesce if a certain event occurs.
There is no automatic resume.

All events will be reported via DASD Extended Error Reporting (EER)
if configured.

Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

s390/dasd: remove unused DASD EER defines

Remove definitions that have never been used.

Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-cgroup: delete cpd_init_fn of blkcg_policy

blkcg_policy cpd_init_fn() is used to just initialize some default
fields of policy data, which is enough to do in cpd_alloc_fn().

This patch delete the only user bfq_cpd_init(), and remove cpd_init_fn
from blkcg_policy.

Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230406145050.49914-4-zhouchengming@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-cgroup: delete cpd_bind_fn of blkcg_policy

cpd_bind_fn is just used for update default weight when block
subsys attached to a hierarchy. No any policy need it anymore.

Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230406145050.49914-3-zhouchengming@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block, bfq: remove BFQ_WEIGHT_LEGACY_DFL

BFQ_WEIGHT_LEGACY_DFL is the same as CGROUP_WEIGHT_DFL, which means
we don't need cpd_bind_fn() callback to update default weight when
attached to a hierarchy.

This patch remove BFQ_WEIGHT_LEGACY_DFL and cpd_bind_fn().

Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230406145050.49914-2-zhouchengming@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

sed-opal: Add command to read locking range parameters.

It returns following attributes:

locking range start
locking range length
read lock enabled
write lock enabled
lock state (RW, RO or LK)

It can be retrieved by user authority provided the authority
was added to locking range via prior IOC_OPAL_ADD_USR_TO_LR
ioctl command. The command was extended to add user in ACE that
allows to read attributes listed above.

Signed-off-by: Ondrej Kozina <okozina@redhat.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Tested-by: Milan Broz <gmazyland@gmail.com>
Link: https://lore.kernel.org/r/20230405111223.272816-6-okozina@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

sed-opal: add helper to get multiple columns at once.

Refactors current code querying single column to use the
new helper. Real multi column usage will be added later.

Signed-off-by: Ondrej Kozina <okozina@redhat.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Tested-by: Milan Broz <gmazyland@gmail.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230405111223.272816-5-okozina@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

sed-opal: allow user authority to get locking range attributes.

Extend ACE set of locking range attributes accessible to user
authority. This patch allows user authority to get following
locking range attribues when user get added to locking range via
IOC_OPAL_ADD_USR_TO_LR:

locking range start
locking range end
read lock enabled
write lock enabled
read locked
write locked
lock on reset
active key

Note: Admin1 authority always remains in the ACE. Otherwise
it breaks current userspace expecting Admin1 in the ACE (sedutils).

See TCG OPAL2 s.4.3.1.7 "ACE_Locking_RangeNNNN_Get_RangeStartToActiveKey".

Signed-off-by: Ondrej Kozina <okozina@redhat.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Tested-by: Milan Broz <gmazyland@gmail.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230405111223.272816-4-okozina@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

sed-opal: add helper for adding user authorities in ACE.

Move ACE construction away from add_user_to_lr routine
and refactor it to be used also in later code.

Also adds boolean operators defines from TCG Core
specification.

Signed-off-by: Ondrej Kozina <okozina@redhat.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Tested-by: Milan Broz <gmazyland@gmail.com>
Link: https://lore.kernel.org/r/20230405111223.272816-3-okozina@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

sed-opal: do not add same authority twice in boolean ace.

While adding user authority in boolean ace value
of uid OPAL_LOCKINGRANGE_ACE_WRLOCKED or
OPAL_LOCKINGRANGE_ACE_RDLOCKED, it was added twice.

It seemed redundant when only single authority was added
in the set method aka { authority1, authority1, OR }:

TCG Storage Architecture Core Specification, 5.1.3.3 ACE_expression

"This is an alternative type where the options are either a uidref to an
Authority object or one of the boolean_ACE (AND = 0 and OR = 1) options.
This type is used within the AC_element list to form a postfix Boolean
expression of Authorities."

Signed-off-by: Ondrej Kozina <okozina@redhat.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Tested-by: Milan Broz <gmazyland@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230405111223.272816-2-okozina@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>