iio: adc: ad7606: Move common channel definition to header

The common channel definition which are going to be used by both core
file but also spi file, were moved in header file. Some devices have
different channel definitions when are used in software mode, feature
available only with spi, and those definitions will be added in spi file.

Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: document bindings for mounting matrices

The mounting matrix for sensors was introduced in
commit dfc57732ad38 ("iio:core: mounting matrix support")

However the device tree bindings are very terse and since this is
a widely applicable property, we need a proper binding for it
that the other bindings can reference. This will also be useful
for other operating systems and sensor engineering at large.

I think all 3D sensors should support it, the current situation
is probably that the mounting information is confined in magic
userspace components rather than using the mounting matrix, which
is not good for portability and reuse.

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Gregor Boirie <gregor.boirie@parrot.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Samu Onkalo <samu.onkalo@intel.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: common: cros_ec_sensors: Expose cros_ec_sensors frequency range via iio sysfs

Embedded controller return minimum and maximum frequencies, unfortunately
we have no way to know the step for all available frequencies.
Even if not complete, we can return a list of known values using the
standard read_avail callback (IIO_CHAN_INFO_SAMP_FREQ) to provide them to
userland.

Now cros_ec_* sensors provides frequencies values in sysfs like this:
"0 min max". 0 is always true to disable the sensor.

Default frequencies are provided for earlier protocol.

Signed-off-by: Nick Vaccaro <nvaccaro@chromium.org>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
[rebased on top of iio/testing and solved conflicts]
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: cros_ec_accel_legacy: Add support for veyron-minnie

Veyron minnie embedded controller presents 2 accelerometers using an
older interface. Add function to query the data in cros_ec_accel.

Verify accelerometers on veyron-minnie are presented and working.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: cros_ec_accel_legacy: Use cros_ec_sensors_core

Remove duplicate code in cros-ec-accel-legacy,
use cros-ec-sensors-core functions and structures when possible.

On glimmer, check the 2 accelerometers are presented and working.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: cros_ec_accel_legacy: Fix incorrect channel setting

INFO_SCALE is set both for each channel and all channels.
iio is using all channel setting, so the error was not user visible.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: cros_ec: Add sign vector in core for backward compatibility

To allow cros_ec iio core library to be used with legacy device, add a
vector to rotate sensor data if necessary: legacy devices are not
reporting data in HTML5/Android sensor referential.

Check the data is not rotated on recent chromebooks that use the HTML5
standard to present sensor data.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: common: cros_ec_sensors: determine protocol version

This patch adds a function to determine which version of the
protocol is used to communicate with EC.

Signed-off-by: Nick Vaccaro <nvaccaro@chromium.org>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
[rebased on top of iio/testing and solved conflicts]
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

counter/ftm-quaddec: Use device-managed registration API

Make use of devm_counter_register.
Then we can remove redundant unregistration API
usage to make code simpler.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: st_lsm6dsx: flip irq return logic

No need for using reverse logic in the irq return,
fix this by flip things around.

Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR

For today the st_lsm6dsx driver support LSM6DSO and LSM6DSR sensor only in
spi and i2c mode.

The LSM6DSO and LSM6DSR are also i3c capable so let's give i3c support to
them.

Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Merge tag 'tags/i3c/export-i3c_device_match_id' into HEAD

Needed for the st_lsm6dsx_i3c.c driver

iio: magnetometer: mmc35240: Fix a typo in the name of a constant

Everything is about mmc35240_ except MMC53240_WAIT_SET_RESET (3 and 5
switched).

This is likely a typo. Define and use MMC35240_WAIT_SET_RESET instead.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: pressure: hp03: convert to i2c_new_dummy_device

Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
ERRPTR which we use in error handling.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: light: veml6070: convert to i2c_new_dummy_device

Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
ERRPTR which we use in error handling.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: light: cm36651: convert to i2c_new_dummy_device

Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
ERRPTR which we use in error handling.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: imu: add bindings for ADIS16460

This change adds device-tree bindings for the ADIS16460.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: Add support for the ADIS16460 IMU

The ADIS16460 device is a complete inertial system that includes a triaxial
gyroscope and a triaxial accelerometer. It's more simplified design than
that of the ADIS16480, and does not offer the triaxial magnetometers &
pressure sensors. It does also have a temperature sensor (like the
ADIS16480).
Since it is part of the ADIS16XXX family, it re-uses parts of the ADIS
library.

Naturally, the register map is different and much more simplified than the
ADIS16480 subfamily, so it cannot be integrated into that driver. A major
difference is that the registers are not paged.

One thing that is particularly special about it, is that it requires a
higher delay between CS changes (i.e. when CS goes up, the spec recommends
that it be brought down after a minimum of 16 uS).
Other ADIS chips require (via spec) a minimum of 2 uS between CS changes.
The kernel's 10 uS default should be fine for those other chips; they
haven't been tested with lower CS change delays yet.

Datasheet:
  https://www.analog.com/media/en/technical-documentation/data-sheets/adis16460.pdf

Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: adis: Add support for SPI transfer cs_change_delay

The ADIS16460 requires a higher delay before the next transfer. Since the
SPI framework supports configuring the delay before the next transfer, this
driver will become the first user of it.

The support for this functionality in ADIS16460 requires an addition to the
ADIS lib to support the `cs_change_delay` functionality from the SPI
subsystem.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: mxc4005: Use device-managed APIs

Use device-managed APIs to simplify the code.
The remove function is redundant now and can
be deleted.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: humidity: Use device-managed APIs

Use device-managed APIs to simplify the code.
The remove functions are redundant now and can
be deleted.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: ad2s1210: Use device-managed API

Use device-managed API to simplify the code.
The remove function is redundant now and can
be deleted.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: maxim_thermocouple: Use device-managed APIs

Use device-managed APIs to simplify the code.
The remove functions are redundant now and can
be deleted.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: make st_sensors drivers use regmap

This patch is meant to replace the i2c/spi transfer functions with
regmap. SPI framework requires DMA safe buffers so let's add GFP_DMA
flag for memory allocation used by bulk_read functions.

Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: move 3-wire spi initialization to st_sensors_spi

Some devices need to be configured with special bit in order to
use spi 3-wire. This was done during device identification phase.
Instead, let's move this part as spi specific.
Doing this the check_device_support function becomes a simple
device id check, so let's rename it.

Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio:pressure: device settings are set immediately during probe

This patch set pressure settings right after probe start. This is
done in preparation of regmap that needs different configuration
based on multiread bit value.

Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio:magn: device settings are set immediately during probe

This patch set magn settings right after probe start. This is
done in preparation of regmap that needs different configuration
based on multiread bit value.

Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio:gyro: device settings are set immediately during probe

This patch set gyro settings right after probe start. This is
done in preparation of regmap that needs different configuration
based on multiread bit value.

Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio:accel: device settings are set immediately during probe

This patch set accel settings right after probe start. This is
done in preparation of regmap that needs different configuration
based on multiread bit value.

Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio:pressure: introduce st_press_get_settings() function

The function is introduced to retrieve press device settings. It will be
used by probe in order to configure regmap.

Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio:magn: introduce st_magn_get_settings() function

The function is introduced to retrieve magn device settings. It will be
used by probe in order to configure regmap.

Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio:gyro: introduce st_gyro_get_settings() function

The function is introduced to retrieve gyro device settings. It will be
used by probe in order to configure regmap.

Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio:accel: introduce st_accel_get_settings() function

The function is introduced to retrieve accel device settings. It will be
used by probe in order to configure regmap.

Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio:common:st_sensors: add st_sensors_get_settings_index() helper function

Extract from st_sensors_check_device_support() function the code that
is used to get the specific settings for a device. This will be used
as generic extractor by each ST driver.

Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: cros_ec: Remove replacing error code with -EIO

Due to an API misread, error code can be different for -EIO when reading
a sysfs entry. Return the error reported by the cros_ec stack.

Check the proper error message (protocol error, not supported) is
reported when there is an error returned by the EC stack.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: cros_ec: Add calibscale for 3d MEMS

Add calibration scale support to accel, gyro and magnetometer.

Check on eve with current firmware, check reading calibscale returns 1.0,
check with newer firmware values are applied.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: light: apds9960: Fix a typo

s/ADPS9960/APDS9960/
(P and D switched)

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: sca3000: Fix a typo

All #define are about SCA3000_... except the last one.
Make it consistent.

s/SAC3000/SCA3000/

This #define is apparently unused up to now.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

IIO: stm32: Remove quadrature related functions from trigger driver

Quadrature feature is now hosted on it own framework.
Remove quadrature related code from stm32-trigger driver to avoid
code duplication and simplify the ABI.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: ad7192: create of_device_id array

Create list of compatible device ids to be matched with those stated in
the device tree.

Signed-off-by: Bárbara Fernandes <barbara.fernandes@usp.br>
Signed-off-by: Wilson Sales <spoonm@spoonm.org>
Co-developed by: Wilson Sales <spoonm@spoonm.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: imu: st_lsm6dsx: add lsm6ds3tr-c device bindings

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: st_lsm6dsx: add support to LSM6DS3TR-C

Add support to STM LSM6DS3TR-C 6-axis (acc + gyro) Mems sensor
https://www.st.com/resource/en/datasheet/lsm6ds3tr-c.pdf

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Documentation: ABI: iio: Add missing newline at end of file

"git diff" says:

    \ No newline at end of file

after modifying the files.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: stm32-adc: add analog switches supply control

On stm32h7 and stm32mp1, the ADC inputs are multiplexed with analog
switches which have reduced performances when their supply is below 2.7V
(vdda by default):
- 3.3V embedded booster can be used, to get full ADC performances
  (increases power consumption).
- vdd supply can be selected if above 2.7V by setting ANASWVDD syscfg bit,
  on STM32MP1 only.

Make this optional, since this is a trade-off between analog performance
and power consumption.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: adc: stm32: add analog switches supply control

On stm32h7 and stm32mp1, the ADC inputs are multiplexed with analog
switches which have reduced performances when their supply is below 2.7V
(vdda by default). Booster or vdd can be used, to get full ADC
performances.

Add documentation for:
- optional booster-supply that can be used on stm32h7 and stm32mp1.
- optional vdd-supply that can be used on stm32mp1 to supply analog
  circuitry, selected by syscfg.
Mark these as optional, since this is a trade-off between analog
performance and power consumption.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: light: stk3310: Add device tree support

Add device tree support for the stk33xx family of ambient light sensors.

Tested-by: Martijn Braam <martijn@brixit.nl>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: light: add stk33xx

Add binding documentation for the stk33xx family of ambient light
sensors.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: Add vendor prefix for sensortek

Sensortek Technology Corp. produces Proximity Sensors with ALS and
Accelerometers.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: mpu6050: Replace devm_add_action() followed by failure action with devm_add_action_or_reset()

devm_add_action_or_reset() is introduced as a helper function which
internally calls devm_add_action(). If devm_add_action() fails
then it will execute the action mentioned and return the error code.
This reduce source code size (avoid writing the action twice)
and reduce the likelyhood of bugs.

Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: sc27xx: Replace devm_add_action() followed by failure action with devm_add_action_or_reset()

devm_add_action_or_reset() is introduced as a helper function which
internally calls devm_add_action(). If devm_add_action() fails
then it will execute the action mentioned and return the error code.
This reduce source code size (avoid writing the action twice)
and reduce the likelyhood of bugs.

Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: sc27xx: Introduce local variable 'struct device *dev'

Introduce local variable 'struct device *dev' and use it instead of
dereferencing it repeatly.

Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

MAINTAINERS: add entry for plantower pms7003 driver

Add myself as a plantower pms7003 driver maintainer.

Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: chemical: pms7003: convert bindings to yaml

Convert existing device tree bindings to yaml.

Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

i3c: move i3c_device_match_id to device.c and export it

Some I3C device drivers need to know which entry matches the
i3c_device object passed to the probe function

Let's move i3c_device_match_id() to device.c and export it so it can be
used by drivers.

Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>

staging: rtl8192*: display ESSIDs using %pE

Everywhere else in the kernel ESSIDs are printed using %pE, and I can't
see why there should be an exception here.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Link: https://lore.kernel.org/r/1562799574-13315-1-git-send-email-bfields@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: hal: Remove unneeded variable pU1Tmp

Both pu8 and pU1Tmp are of same data type u8. So replace pU1Tmp with u8.

Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Link: https://lore.kernel.org/r/20190725032325.GA16473@hari-Inspiron-1545
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: Remove unused function prototype ODM_SetAntenna()

Remove unused function prototype ODM_SetAntenna.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190725052645.2372-9-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: Replace function ODM_TXPowerTrackingCheck()

Remove function ODM_TXPowerTrackingCheck as all it does is call
odm_TXPowerTrackingCheckCE.
Rename odm_TXPowerTrackingCheckCE to ODM_TXPowerTrackingCheck to
maintain compatibility with call site.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190725052645.2372-8-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: Replace function odm_TXPowerTrackingInit()

Remove function odm_TXPowerTrackingInit as all it does is call
odm_TXPowerTrackingThermalMeterInit.
Rename odm_TXPowerTrackingThermalMeterInit to
odm_TXPowerTrackingInit to maintain compatibility with call sites.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190725052645.2372-7-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: Replace function beacon_timing_control()

Remove function beacon_timing_control as it does nothing except call
rtw_hal_bcn_related_reg_setting.
Rename rtw_hal_bcn_related_reg_setting to beacon_timing_control to
maintain compatibility with call site.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190725052645.2372-6-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: hal: Replace function rtl8723b_set_ap_wowlan_cmd()

Remove function rtl8723b_set_ap_wowlan_cmd as all it does is call
rtl8723b_set_AP_FwWoWlanRelated_cmd.
Rename rtl8723b_set_AP_FwWoWlanRelated_cmd to
rtl8723b_set_ap_wowlan_cmd to maintain compatibility with call site.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190725052645.2372-5-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: hal: Replace function rtl8723b_set_wowlan_cmd()

Remove function rtl8723b_set_wowlan_cmd as all it does is call
rtl8723b_set_FwWoWlanRelated_cmd.
Rename rtl8723b_set_FwWoWlanRelated_cmd to rtl8723b_set_wowlan_cmd to
maintain compatibility with call site.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190725052645.2372-4-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: hal: Replace function PHY_GetTxPowerIndex()

Remove function PHY_GetTxPowerIndex as it does nothing except call
PHY_GetTxPowerIndex_8723B.
Rename PHY_GetTxPowerIndex_8723B to PHY_GetTxPowerIndex to maintain
compatibility with call site.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190725052645.2372-3-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: hal: Replace function PHY_SetTxPowerIndex()

Remove function PHY_SetTxPowerIndex as it does nothing except call
PHY_SetTxPowerIndex_8723B.
Rename PHY_SetTxPowerIndex_8723B to PHY_SetTxPowerIndex to maintain
compatibility with call site.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190725052645.2372-2-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: rtw_pwrctrl: Change true/false checks

Change comparisons to true to the variable itself.
Change comparisons to false to the negation of the variable.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190725052645.2372-1-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/rtl8192u: fix indentation issue, remove extra tab

A statement is indented one level too deeply; clean this up by
removing a tab.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190723145022.11608-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: mt7621-pci: avoid use 'err' local variable

Function 'mt7621_pcie_request_resources' is using 'err'
local variable to get value returned from 'devm_request_pci_bus_resources'
and returning after that. This is not needed at all. Instead of that
just directly return returned value by the function which is also
returning zero on success.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20190720072908.16795-1-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: remove set but not used variable 'payload '

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/staging/rtl8192e/rtllib_rx.c: In function rtllib_rx_InfraAdhoc:
drivers/staging/rtl8192e/rtllib_rx.c:1303:6: warning:
 variable payload set but not used [-Wunused-but-set-variable]

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190717143551.29200-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: hal: remove redundant assignment to variable n

The variable n is being assigned a value that is never read, the
assignment is redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190723145905.13514-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: remove unused file hal_phy.c

Remove the unused file hal_phy.c. No function from this file is used
in the driver code and it is not listed in the Makefile.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20190721175735.24173-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: core: Remove Unneeded variable ret

Remove Unneeded variable ret . Return _FAIL .

We cannot change return type of on_action_spct as its callback function.

Issue identified with coccicheck.

Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Link: https://lore.kernel.org/r/20190717180635.GA11412@hari-Inspiron-1545
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: os_dep: change return type of rtw_suspend_ap_wow

Change return type of rtw_suspend_ap_wow as its always return SUCCCESS.

Issue found with coccicheck

Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Link: https://lore.kernel.org/r/20190717175642.GA10582@hari-Inspiron-1545
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: remove set but not used variable 'cck_highpwr'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/staging/rtl8723bs/hal/odm_HWConfig.c:
 In function odm_RxPhyStatus92CSeries_Parsing:
drivers/staging/rtl8723bs/hal/odm_HWConfig.c:92:5: warning:
 variable cck_highpwr set but not used [-Wunused-but-set-variable]

It is never used and can be removed.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190717142014.43216-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: r8712_free_recvframe(): Change return type

Change return type of r8712_free_recvframe from int to void as it always
returns _SUCCESS and its return value is never used.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190722092341.21030-8-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: r8712_init_recvbuf(): Change return type

Change return type of r8712_init_recvbuf from int to void as it always
returned _SUCCESS and this return value was never used at any call site.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190722092341.21030-7-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: r8712_set_802_11_add_wep(): Change return values

Change call sites of r8712_set_802_11_add_wep to check for 0 and
non-zero values (e.g -EINVAL, -ENOMEM) instead of for _SUCCESS and
_FAIL.
Change return values of r8712_set_802_11_add_wep from true and false and
_SUCCESS to -EINVAL and the return value of r8712_set_key.
Change return type from u8 to int to accommodate these new return
values.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190722092341.21030-6-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: init_mp_priv(): Change return values

Change return values of init_mp_priv from _SUCCESS/_FAIL to 0/-ENOMEM
respectively.
Remove label that returns the required value and return the values
directly as they are set.
Consequently remove now-unnecessary return variable.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190722092341.21030-5-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: r8712_register_cmd_alive(): Change return values

Change return values of r8712_register_cmd_alive from _SUCCESS and _FAIL
to 0 and -EINVAL.
Change the return type of this function from sint to int.
Modify its call site to check for 0 instead of _SUCCESS.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190722092341.21030-4-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: r8712_set_key(): Change return values

Change return values of r8712_set_key from _SUCCESS and _FAIL to 0 and
-ENOMEM or -EINVAL, as the case may require.
Modify return statements and return variable accordingly.
Change return type from sint to int.
As there is only one site where the return value is used, update that
call site according to the change in the return values.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190722092341.21030-3-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: r8712_set_auth(): Change return values

Change return values of r8712_set_auth from _SUCCESS/_FAIL to 0/-ENOMEM
respectively. Modify call site accordingly. Also change return type of
the function from sint to int.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190722092341.21030-2-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: r8712_init_mlme_priv(): Change return values

Change return values of r8712_init_mlme_priv from _SUCCESS/_FAIL to
0/-ENOMEM respectively. Modify call site accordingly.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190722092341.21030-1-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: Merge memcpy + be16_to_cpus to get_unaligned_be16

Merge the combo of memcpy and be16_to_cpus.
Use get_unaligned_be16 instead.
This simplifies the code.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20190719070921.27749-1-hslester96@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: recv_linux.c: Align * on block comment

Block comments should align the * on each line.
This warning was reported by checkpatch.pl

Signed-off-by: Christian L Moreno <christianluciano.m@gmail.com>
Link: https://lore.kernel.org/r/20190716190915.30869-1-christianluciano.m@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: Merge memcpy + le32_to_cpus to get_unaligned_le32

Merge the combo use of memcpy and le32_to_cpus.
Use get_unaligned_le32 instead.
This simplifies the code.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20190725025203.8772-1-hslester96@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: daqboard2000: Remove function db2k_initialize_dac()

Remove function db2k_initialize_dac as all it does is call
db2k_dac_disarm.
Modify call site accordingly.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190725052359.2308-1-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ion: Remove unused rbtree for ion_buffer

ion_buffer_add() insert ion_buffer into rbtree every time creating
an ion_buffer but never use it after ION reworking.
Also, buffer_lock protects only rbtree operation, remove it together.

Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: YJ Chiang <yj.chiang@mediatek.com>
Cc: Lecopzer Chen <lecopzer.chen@mediatek.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Link: https://lore.kernel.org/r/20190712084717.12441-1-lecopzer.chen@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: mt7621-pinctrl: Add of_node_put() before return

Each iteration of for_each_compatible_node puts the previous node, but
in the case of a return from the middle of the loop, there is no put,
thus causing a memory leak. Add an of_node_put before the return.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190716055908.3183-1-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: mt7621-pci: Add of_node_put() before return

Each iteration of for_each_available_child_of_node puts the previous
node, but in the case of a return from the middle of the loop, there is
no put, thus causing a memory leak. Hence add an of_node_put before the
return in two places.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190716055944.3237-1-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: erofs: support bmap

Add erofs_bmap() to support FIBMAP ioctl on flatmode inode.

Reviewed-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Link: https://lore.kernel.org/r/20190716093256.108791-1-yuchao0@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: erofs: avoid opened loop codes

Use __GFP_NOFAIL to avoid opened loop codes in z_erofs_vle_unzip().

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Gao Xiang <gaoxiang25@huawei.com>
Link: https://lore.kernel.org/r/20190716094422.110805-1-yuchao0@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: change alignment to match parenthesis

Change indentation to match parentheses.  This complies with the Linux
kernel coding style and improves readability.

Signed-off-by: Benjamin Sherman <benjamin@bensherman.io>
Link: https://lore.kernel.org/r/20190716045754.fivh5n44bybe2uce@valkyrie-mobile.localdomain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Replace function rtl88eu_phy_rf_config()

Remove function rtl88eu_phy_rf_config as all it does is call
rtl88e_phy_rf6052_config.
Rename rtl88e_phy_rf6052_config to rtl88eu_phy_rf_config and change its
type from static to non-static to maintain compatibility with call
sites.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190712071746.2474-8-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Replace function rtl88e_phy_rf6052_config()

Remove function rtl88e_phy_rf6052_config as all it does is call
rf6052_conf_para.
Rename rf6052_conf_para to rtl88e_phy_rf6052_config to maintain
compatibility with call site.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190712071746.2474-7-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Replace function rtw_alloc_network()

Change external call site of _rtw_alloc_network to rtw_alloc_network.
Remove function rtw_alloc_network as all it does is call
_rtw_alloc_network.
Rename _rtw_alloc_network to rtw_alloc_network to maintain compatibility
with call sites. Keep its type as non-static (even though the old
rtw_alloc_network was static) as this functionality is used in other
files as well.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190712071746.2474-6-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function rtw_modular64()

Remove function rtw_modular64 as all it does is call do_div.
Replace call to rtw_modular64 with call to do_div.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190712071746.2474-5-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function rtw_os_indicate_scan_done()

In function rtw_indicate_scan_done, replace call to
rtw_os_indicate_scan_done with call to indicate_wx_scan_complete_event
as all that rtw_os_indicate_scan_done does is call
indicate_wx_scan_complete_event.
Remove now-unused function rtw_os_indicate_scan_done.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190712071746.2474-4-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Replace function beacon_timing_control()

Remove function beacon_timing_control as all it does is call
rtw_hal_bcn_related_reg_setting.
Rename rtw_hal_bcn_related_reg_setting to beacon_timing_control for
compatibility with call sites.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190712071746.2474-3-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: core: Remove function enable_rate_adaptive()

Remove function enable_rate_adaptive as it does nothing except call
Update_RA_Entry.
Modify call site of enable_rate_adaptive to call Update_RA_Entry
instead.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190712071746.2474-2-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: core: Replace function Set_MSR()

Change reference to Set_NETYPE0_MSR to Set_MSR.
Replace the contents of Set_MSR with the contents of Set_NETYPE0_MSR as
Set_MSR does nothing but call Set_NETYPE0_MSR.
Delete Set_NETYPE0_MSR.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190712071746.2474-1-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: core: Change return type of init_mlme_ext_priv

As init_mlme_ext_priv function always returns SUCCESS , We can change
return type from int to void.

Fixes below issue identified by coccicheck
drivers/staging/rtl8723bs/core/rtw_mlme_ext.c:464:5-8: Unneeded
variable: "res". Return "_SUCCESS" on line 492

Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Link: https://lore.kernel.org/r/20190715174618.GA8947@hari-Inspiron-1545
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>