mm, compaction: move high_pfn to the for loop scope

commit 74e21484e40bb8ce0f9828bbfe1c9fc9b04249c6 upstream.

In fast_isolate_freepages, high_pfn will be used if a prefered one (ie
PFN >= low_fn) not found.

But the high_pfn is not reset before searching an free area, so when it
was used as freepage, it may from another free area searched before.  As
a result move_freelist_head(freelist, freepage) will have unexpected
behavior (eg corrupt the MOVABLE freelist)

  Unable to handle kernel paging request at virtual address dead000000000200
  Mem abort info:
    ESR = 0x96000044
    Exception class = DABT (current EL), IL = 32 bits
    SET = 0, FnV = 0
    EA = 0, S1PTW = 0
  Data abort info:
    ISV = 0, ISS = 0x00000044
    CM = 0, WnR = 1
  [dead000000000200] address between user and kernel address ranges

  -000|list_cut_before(inline)
  -000|move_freelist_head(inline)
  -000|fast_isolate_freepages(inline)
  -000|isolate_freepages(inline)
  -000|compaction_alloc(?, ?)
  -001|unmap_and_move(inline)
  -001|migrate_pages([NSD:0xFFFFFF80088CBBD0] from = 0xFFFFFF80088CBD88, [NSD:0xFFFFFF80088CBBC8] get_new_p
  -002|__read_once_size(inline)
  -002|static_key_count(inline)
  -002|static_key_false(inline)
  -002|trace_mm_compaction_migratepages(inline)
  -002|compact_zone(?, [NSD:0xFFFFFF80088CBCB0] capc = 0x0)
  -003|kcompactd_do_work(inline)
  -003|kcompactd([X19] p = 0xFFFFFF93227FBC40)
  -004|kthread([X20] _create = 0xFFFFFFE1AFB26380)
  -005|ret_from_fork(asm)

The issue was reported on an smart phone product with 6GB ram and 3GB
zram as swap device.

This patch fixes the issue by reset high_pfn before searching each free
area, which ensure freepage and freelist match when call
move_freelist_head in fast_isolate_freepages().

Link: http://lkml.kernel.org/r/20190118175136.31341-12-mgorman@techsingularity.net
Link: https://lkml.kernel.org/r/20210112094720.1238444-1-wu-yan@tcl.com
Fixes: 5a811889de10f1eb ("mm, compaction: use free lists to quickly locate a migration target")
Signed-off-by: Rokudo Yan <wu-yan@tcl.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: hugetlb: remove VM_BUG_ON_PAGE from page_huge_active

commit ecbf4724e6061b4b01be20f6d797d64d462b2bc8 upstream.

The page_huge_active() can be called from scan_movable_pages() which do
not hold a reference count to the HugeTLB page.  So when we call
page_huge_active() from scan_movable_pages(), the HugeTLB page can be
freed parallel.  Then we will trigger a BUG_ON which is in the
page_huge_active() when CONFIG_DEBUG_VM is enabled.  Just remove the
VM_BUG_ON_PAGE.

Link: https://lkml.kernel.org/r/20210115124942.46403-6-songmuchun@bytedance.com
Fixes: 7e1f049efb86 ("mm: hugetlb: cleanup using paeg_huge_active()")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: hugetlb: fix a race between isolating and freeing page

commit 0eb2df2b5629794020f75e94655e1994af63f0d4 upstream.

There is a race between isolate_huge_page() and __free_huge_page().

  CPU0:                                     CPU1:

  if (PageHuge(page))
                                            put_page(page)
                                              __free_huge_page(page)
                                                  spin_lock(&hugetlb_lock)
                                                  update_and_free_page(page)
                                                    set_compound_page_dtor(page,
                                                      NULL_COMPOUND_DTOR)
                                                  spin_unlock(&hugetlb_lock)
    isolate_huge_page(page)
      // trigger BUG_ON
      VM_BUG_ON_PAGE(!PageHead(page), page)
      spin_lock(&hugetlb_lock)
      page_huge_active(page)
        // trigger BUG_ON
        VM_BUG_ON_PAGE(!PageHuge(page), page)
      spin_unlock(&hugetlb_lock)

When we isolate a HugeTLB page on CPU0.  Meanwhile, we free it to the
buddy allocator on CPU1.  Then, we can trigger a BUG_ON on CPU0, because
it is already freed to the buddy allocator.

Link: https://lkml.kernel.org/r/20210115124942.46403-5-songmuchun@bytedance.com
Fixes: c8721bbbdd36 ("mm: memory-hotplug: enable memory hotplug to handle hugepage")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: hugetlb: fix a race between freeing and dissolving the page

commit 7ffddd499ba6122b1a07828f023d1d67629aa017 upstream.

There is a race condition between __free_huge_page()
and dissolve_free_huge_page().

  CPU0:                         CPU1:

  // page_count(page) == 1
  put_page(page)
    __free_huge_page(page)
                                dissolve_free_huge_page(page)
                                  spin_lock(&hugetlb_lock)
                                  // PageHuge(page) && !page_count(page)
                                  update_and_free_page(page)
                                  // page is freed to the buddy
                                  spin_unlock(&hugetlb_lock)
      spin_lock(&hugetlb_lock)
      clear_page_huge_active(page)
      enqueue_huge_page(page)
      // It is wrong, the page is already freed
      spin_unlock(&hugetlb_lock)

The race window is between put_page() and dissolve_free_huge_page().

We should make sure that the page is already on the free list when it is
dissolved.

As a result __free_huge_page would corrupt page(s) already in the buddy
allocator.

Link: https://lkml.kernel.org/r/20210115124942.46403-4-songmuchun@bytedance.com
Fixes: c8721bbbdd36 ("mm: memory-hotplug: enable memory hotplug to handle hugepage")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: hugetlbfs: fix cannot migrate the fallocated HugeTLB page

commit 585fc0d2871c9318c949fbf45b1f081edd489e96 upstream.

If a new hugetlb page is allocated during fallocate it will not be
marked as active (set_page_huge_active) which will result in a later
isolate_huge_page failure when the page migration code would like to
move that page.  Such a failure would be unexpected and wrong.

Only export set_page_huge_active, just leave clear_page_huge_active as
static.  Because there are no external users.

Link: https://lkml.kernel.org/r/20210115124942.46403-3-songmuchun@bytedance.com
Fixes: 70c3547e36f5 (hugetlbfs: add hugetlbfs_fallocate())
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 9043/1: tegra: Fix misplaced tegra_uart_config in decompressor

commit 538eea5362a1179dfa7770dd2b6607dc30cc50c6 upstream.

The tegra_uart_config of the DEBUG_LL code is now placed right at the
start of the .text section after commit which enabled debug output in the
decompressor. Tegra devices are not booting anymore if DEBUG_LL is enabled
since tegra_uart_config data is executes as a code. Fix the misplaced
tegra_uart_config storage by embedding it into the code.

Cc: stable@vger.kernel.org
Fixes: 2596a72d3384 ("ARM: 9009/1: uncompress: Enable debug in head.S")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: footbridge: fix dc21285 PCI configuration accessors

commit 39d3454c3513840eb123b3913fda6903e45ce671 upstream.

Building with gcc 4.9.2 reveals a latent bug in the PCI accessors
for Footbridge platforms, which causes a fatal alignment fault
while accessing IO memory. Fix this by making the assembly volatile.

Cc: stable@vger.kernel.org
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts; gta04: SPI panel chip select is active low

commit 181739822cf6f8f4e12b173913af2967a28906c0 upstream.

With the arrival of

commit 2fee9583198eb9 ("spi: dt-bindings: clarify CS behavior for spi-cs-high and gpio descriptors")

it was clarified what the proper state for cs-gpios should be, even if the
flag is ignored. The driver code is doing the right thing since

766c6b63aa04 ("spi: fix client driver breakages when using GPIO descriptors")

The chip-select of the td028ttec1 panel is active-low, so we must omit spi-cs-high;
attribute (already removed by separate patch) and should now use GPIO_ACTIVE_LOW for
the client device description to be fully consistent.

Fixes: 766c6b63aa04 ("spi: fix client driver breakages when using GPIO descriptors")
CC: stable@vger.kernel.org
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

DTS: ARM: gta04: remove legacy spi-cs-high to make display work again

commit 07af7810e0a5bc4e51682c90f9fa19fc4cb93f18 upstream.

This reverts

commit f1f028ff89cb ("DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again")

which had to be intruduced after

commit 6953c57ab172 ("gpio: of: Handle SPI chipselect legacy bindings")

broke the GTA04 display. This contradicted the data sheet but was the only
way to get it as an spi client operational again.

The panel data sheet defines the chip-select to be active low.

Now, with the arrival of

commit 766c6b63aa04 ("spi: fix client driver breakages when using GPIO descriptors")

the logic of interaction between spi-cs-high and the gpio descriptor flags
has been changed a second time, making the display broken again. So we have
to remove the original fix which in retrospect was a workaround of a bug in
the spi subsystem and not a feature of the panel or bug in the device tree.

With this fix the device tree is back in sync with the data sheet and
spi subsystem code.

Fixes: 766c6b63aa04 ("spi: fix client driver breakages when using GPIO descriptors")
CC: stable@vger.kernel.org
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Set so called 'reserved CR3 bits in LM mask' at vCPU reset

commit 031b91a5fe6f1ce61b7617614ddde9ed61e252be upstream.

Set cr3_lm_rsvd_bits, which is effectively an invalid GPA mask, at vCPU
reset.  The reserved bits check needs to be done even if userspace never
configures the guest's CPUID model.

Cc: stable@vger.kernel.org
Fixes: 0107973a80ad ("KVM: x86: Introduce cr3_lm_rsvd_bits in kvm_vcpu_arch")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210204000117.3303214-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Update emulator context mode if SYSENTER xfers to 64-bit mode

commit 943dea8af21bd896e0d6c30ea221203fb3cd3265 upstream.

Set the emulator context to PROT64 if SYSENTER transitions from 32-bit
userspace (compat mode) to a 64-bit kernel, otherwise the RIP update at
the end of x86_emulate_insn() will incorrectly truncate the new RIP.

Note, this bug is mostly limited to running an Intel virtual CPU model on
an AMD physical CPU, as other combinations of virtual and physical CPUs
do not trigger full emulation.  On Intel CPUs, SYSENTER in compatibility
mode is legal, and unconditionally transitions to 64-bit mode.  On AMD
CPUs, SYSENTER is illegal in compatibility mode and #UDs.  If the vCPU is
AMD, KVM injects a #UD on SYSENTER in compat mode.  If the pCPU is Intel,
SYSENTER will execute natively and not trigger #UD->VM-Exit (ignoring
guest TLB shenanigans).

Fixes: fede8076aab4 ("KVM: x86: handle wrap around 32-bit address space")
Cc: stable@vger.kernel.org
Signed-off-by: Jonny Barker <jonny@jonnybarker.com>
[sean: wrote changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210202165546.2390296-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: fix CPUID entries returned by KVM_GET_CPUID2 ioctl

commit 181f494888d5b178ffda41bed965f187d5e5c432 upstream.

Recent commit 255cbecfe0 modified struct kvm_vcpu_arch to make
'cpuid_entries' a pointer to an array of kvm_cpuid_entry2 entries
rather than embedding the array in the struct. KVM_SET_CPUID and
KVM_SET_CPUID2 were updated accordingly, but KVM_GET_CPUID2 was missed.

As a result, KVM_GET_CPUID2 currently returns random fields from struct
kvm_vcpu_arch to userspace rather than the expected CPUID values. Fix
this by treating 'cpuid_entries' as a pointer when copying its
contents to userspace buffer.

Fixes: 255cbecfe0c9 ("KVM: x86: allocate vcpu->arch.cpuid_entries dynamically")
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com.com>
Message-Id: <20210128024451.1816770-1-michael.roth@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Allow guests to see MSR_IA32_TSX_CTRL even if tsx=off

commit 7131636e7ea5b50ca910f8953f6365ef2d1f741c upstream.

Userspace that does not know about KVM_GET_MSR_FEATURE_INDEX_LIST
will generally use the default value for MSR_IA32_ARCH_CAPABILITIES.
When this happens and the host has tsx=on, it is possible to end up with
virtual machines that have HLE and RTM disabled, but TSX_CTRL available.

If the fleet is then switched to tsx=off, kvm_get_arch_capabilities()
will clear the ARCH_CAP_TSX_CTRL_MSR bit and it will not be possible to
use the tsx=off hosts as migration destinations, even though the guests
do not have TSX enabled.

To allow this migration, allow guests to write to their TSX_CTRL MSR,
while keeping the host MSR unchanged for the entire life of the guests.
This ensures that TSX remains disabled and also saves MSR reads and
writes, and it's okay to do because with tsx=off we know that guests will
not have the HLE and RTM features in their CPUID.  (If userspace sets
bogus CPUID data, we do not expect HLE and RTM to work in guests anyway).

Cc: stable@vger.kernel.org
Fixes: cbbaa2727aa3 ("KVM: x86: fix presentation of TSX feature in ARCH_CAPABILITIES")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86/mmu: Fix TDP MMU zap collapsible SPTEs

commit 87aa9ec939ec7277b730786e19c161c9194cc8ca upstream.

There is a bug in the TDP MMU function to zap SPTEs which could be
replaced with a larger mapping which prevents the function from doing
anything. Fix this by correctly zapping the last level SPTEs.

Cc: stable@vger.kernel.org
Fixes: 14881998566d ("kvm: x86/mmu: Support disabling dirty logging for the tdp MMU")
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210202185734.1680553-11-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: SVM: Treat SVM as unsupported when running as an SEV guest

commit ccd85d90ce092bdb047a7f6580f3955393833b22 upstream.

Don't let KVM load when running as an SEV guest, regardless of what
CPUID says.  Memory is encrypted with a key that is not accessible to
the host (L0), thus it's impossible for L0 to emulate SVM, e.g. it'll
see garbage when reading the VMCB.

Technically, KVM could decrypt all memory that needs to be accessible to
the L0 and use shadow paging so that L0 does not need to shadow NPT, but
exposing such information to L0 largely defeats the purpose of running as
an SEV guest.  This can always be revisited if someone comes up with a
use case for running VMs inside SEV guests.

Note, VMLOAD, VMRUN, etc... will also #GP on GPAs with C-bit set, i.e. KVM
is doomed even if the SEV guest is debuggable and the hypervisor is willing
to decrypt the VMCB.  This may or may not be fixed on CPUs that have the
SVME_ADDR_CHK fix.

Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210202212017.2486595-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvme-pci: avoid the deepest sleep state on Kingston A2000 SSDs

commit 538e4a8c571efdf131834431e0c14808bcfb1004 upstream.

Some Kingston A2000 NVMe SSDs sooner or later get confused and stop
working when they use the deepest APST sleep while running Linux. The
system then crashes and one has to cold boot it to get the SSD working
again.

Kingston seems to known about this since at least mid-September 2020:
https://bbs.archlinux.org/viewtopic.php?pid=1926994#p1926994

Someone working for a German company representing Kingston to the German
press confirmed to me Kingston engineering is aware of the issue and
investigating; the person stated that to their current knowledge only
the deepest APST sleep state causes trouble. Therefore, make Linux avoid
it for now by applying the NVME_QUIRK_NO_DEEPEST_PS to this SSD.

I have two such SSDs, but it seems the problem doesn't occur with them.
I hence couldn't verify if this patch really fixes the problem, but all
the data in front of me suggests it should.

This patch can easily be reverted or improved upon if a better solution
surfaces.

FWIW, there are many reports about the issue scattered around the web;
most of the users disabled APST completely to make things work, some
just made Linux avoid the deepest sleep state:

https://bugzilla.kernel.org/show_bug.cgi?id=195039#c65
https://bugzilla.kernel.org/show_bug.cgi?id=195039#c73
https://bugzilla.kernel.org/show_bug.cgi?id=195039#c74
https://bugzilla.kernel.org/show_bug.cgi?id=195039#c78
https://bugzilla.kernel.org/show_bug.cgi?id=195039#c79
https://bugzilla.kernel.org/show_bug.cgi?id=195039#c80
https://askubuntu.com/questions/1222049/nvmekingston-a2000-sometimes-stops-giving-response-in-ubuntu-18-04dell-inspir
https://community.acer.com/en/discussion/604326/m-2-nvme-ssd-aspire-517-51g-issue-compatibility-kingston-a2000-linux-ubuntu

For the record, some data from 'nvme id-ctrl /dev/nvme0'

NVME Identify Controller:
vid       : 0x2646
ssvid     : 0x2646
mn        : KINGSTON SA2000M81000G
fr        : S5Z42105
[...]
ps    0 : mp:9.00W operational enlat:0 exlat:0 rrt:0 rrl:0
          rwt:0 rwl:0 idle_power:- active_power:-
ps    1 : mp:4.60W operational enlat:0 exlat:0 rrt:1 rrl:1
          rwt:1 rwl:1 idle_power:- active_power:-
ps    2 : mp:3.80W operational enlat:0 exlat:0 rrt:2 rrl:2
          rwt:2 rwl:2 idle_power:- active_power:-
ps    3 : mp:0.0450W non-operational enlat:2000 exlat:2000 rrt:3 rrl:3
          rwt:3 rwl:3 idle_power:- active_power:-
ps    4 : mp:0.0040W non-operational enlat:15000 exlat:15000 rrt:4 rrl:4
          rwt:4 rwl:4 idle_power:- active_power:-

Cc: stable@vger.kernel.org # 4.14+
Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: don't modify identity's files uncess identity is cowed

commit d7e10d47691d1702db1cd1edcc689d3031eefc67 upstream.

Abaci Robot reported following panic:
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 800000010ef3f067 P4D 800000010ef3f067 PUD 10d9df067 PMD 0
Oops: 0002 [#1] SMP PTI
CPU: 0 PID: 1869 Comm: io_wqe_worker-0 Not tainted 5.11.0-rc3+ #1
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:put_files_struct+0x1b/0x120
Code: 24 18 c7 00 f4 ff ff ff e9 4d fd ff ff 66 90 0f 1f 44 00 00 41 57 41 56 49 89 fe 41 55 41 54 55 53 48 83 ec 08 e8 b5 6b db ff  41 ff 0e 74 13 48 83 c4 08 5b 5d 41 5c 41 5d 41 5e 41 5f e9 9c
RSP: 0000:ffffc90002147d48 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff88810d9a5300 RCX: 0000000000000000
RDX: ffff88810d87c280 RSI: ffffffff8144ba6b RDI: 0000000000000000
RBP: 0000000000000080 R08: 0000000000000001 R09: ffffffff81431500
R10: ffff8881001be000 R11: 0000000000000000 R12: ffff88810ac2f800
R13: ffff88810af38a00 R14: 0000000000000000 R15: ffff8881057130c0
FS:  0000000000000000(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000010dbaa002 CR4: 00000000003706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 __io_clean_op+0x10c/0x2a0
 io_dismantle_req+0x3c7/0x600
 __io_free_req+0x34/0x280
 io_put_req+0x63/0xb0
 io_worker_handle_work+0x60e/0x830
 ? io_wqe_worker+0x135/0x520
 io_wqe_worker+0x158/0x520
 ? __kthread_parkme+0x96/0xc0
 ? io_worker_handle_work+0x830/0x830
 kthread+0x134/0x180
 ? kthread_create_worker_on_cpu+0x90/0x90
 ret_from_fork+0x1f/0x30
Modules linked in:
CR2: 0000000000000000
---[ end trace c358ca86af95b1e7 ]---

I guess case below can trigger above panic: there're two threads which
operates different io_uring ctxs and share same sqthread identity, and
later one thread exits, io_uring_cancel_task_requests() will clear
task->io_uring->identity->files to be NULL in sqpoll mode, then another
ctx that uses same identity will panic.

Indeed we don't need to clear task->io_uring->identity->files here,
io_grab_identity() should handle identity->files changes well, if
task->io_uring->identity->files is not equal to current->files,
io_cow_identity() should handle this changes well.

Cc: stable@vger.kernel.org # 5.5+
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Revert "Fix EDID parsing after resume from suspend"

commit 1a10e5244778169a5a53a527d7830cf0438132a1 upstream.

This reverts commit b24bdc37d03a0478189e20a50286092840f414fa.
It caused memory leak after S3 on 4K HDMI displays.

Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Power up combo PHY lanes for for HDMI as well

commit fad9bae9ee5d578afbe6380c82e4715efaddf118 upstream.

Currently we only explicitly power up the combo PHY lanes
for DP. The spec says we should do it for HDMI as well.

Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128155948.13678-3-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit 1e0cb7bef35f0d1aed383bf69a209df218b807c9)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Extract intel_ddi_power_up_lanes()

commit 425cbd1fce10d4d68188123404d1a302a6939e0a upstream.

Reduce the copypasta by pulling the combo PHY lane
power up stuff into a helper. We'll have a third user soon.

Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128155948.13678-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit 5cdf706fb91a6e4e6af799bb957c4d598e6a067b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/display: Prevent double YUV range correction on HDR planes

commit 00f9a08fbc3c703b71842a5425c1eb82053c8a70 upstream.

Prevent the ICL HDR plane pipeline from performing YUV color range
correction twice when the input is in limited range. This is done by
removing the limited-range code from icl_program_input_csc().

Before this patch the following could happen: user space gives us a YUV
buffer in limited range; per the pipeline in [1], the plane would first
go through a "YUV Range correct" stage that expands the range; the plane
would then go through the "Input CSC" stage which would also expand the
range because icl_program_input_csc() would use a matrix and an offset
that assume limited-range input; this would ultimately cause dark and
light colors to appear darker and lighter than they should respectively.

This is an issue because if a buffer switches between being scanned out
and being composited with the GPU, the user will see a color difference.
If this switching happens quickly and frequently, the user will perceive
this as a flickering.

[1] https://01.org/sites/default/files/documentation/intel-gfx-prm-osrc-icllp-vol12-displayengine_0.pdf#page=281

Cc: stable@vger.kernel.org
Signed-off-by: Andres Calderon Jaramillo <andrescj@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215224219.3896256-1-andrescj@google.com
(cherry picked from commit fed387572040e84ead53852a7820e30a30e515d0)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210202084553.30691-1-ville.syrjala@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/gt: Close race between enable_breadcrumbs and cancel_breadcrumbs

commit e4747cb3ec3c232d65c84cbe77633abd5871fda3 upstream.

If we enable_breadcrumbs for a request while that request is being
removed from HW; we may see that the request is active as we take the
ce->signal_lock and proceed to attach the request to ce->signals.
However, during unsubmission after marking the request as inactive, we
see that the request has not yet been added to ce->signals and so skip
the removal. Pull the check during cancel_breadcrumbs under the same
spinlock as enabling so that we the two tests are consistent in
enable/cancel.

Otherwise, we may insert a request onto ce->signals that we expect should
not be there:

  intel_context_remove_breadcrumbs:488 GEM_BUG_ON(!__i915_request_is_complete(rq))

While updating, we can note that we are always called with
irqs-disabled, due to the engine->active.lock being held at the single
caller, and so remove the irqsave/restore making it symmetric to
enable_breadcrumbs.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2931
Fixes: c18636f76344 ("drm/i915: Remove requirement for holding i915_request.lock for breadcrumbs")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: <stable@vger.kernel.org> # v5.10+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119162057.31097-1-chris@chris-wilson.co.uk
(cherry picked from commit e7004ea4f5f528f5a5018f0b70cab36d25315498)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/gem: Drop lru bumping on display unpinning

commit 761c70a52586a9214b29026d384d2c01b73661a8 upstream.

Simplify the frontbuffer unpin by removing the lock requirement. The LRU
bumping was primarily to protect the GTT from being evicted and from
frontbuffers being eagerly shrunk. Now we protect frontbuffers from the
shrinker, and we avoid accidentally evicting from the GTT, so the
benefit from bumping LRU is no more, and we can save more time by not.

Reported-and-tested-by: Matti Hämäläinen <ccr@tnsp.org>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2905
Fixes: c1793ba86a41 ("drm/i915: Add ww locking to pin_to_display_plane, v2.")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119214336.1463-6-chris@chris-wilson.co.uk
(cherry picked from commit 14ca83eece9565a2d2177291ceb122982dc38420)
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: <stable@vger.kernel.org> # v5.10+
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Fix the MST PBN divider calculation

commit 882554042d138dbc6fb1a43017d0b9c3b38ee5f5 upstream.

Atm the driver will calculate a wrong MST timeslots/MTP (aka time unit)
value for MST streams if the link parameters (link rate or lane count)
are limited in a way independent of the sink capabilities (reported by
DPCD).

One example of such a limitation is when a MUX between the sink and
source connects only a limited number of lanes to the display and
connects the rest of the lanes to other peripherals (USB).

Another issue is that atm MST core calculates the divider based on the
backwards compatible DPCD (at address 0x0000) vs. the extended
capability info (at address 0x2200). This can result in leaving some
part of the MST BW unused (For instance in case of the WD19TB dock).

Fix the above two issues by calculating the PBN divider value based on
the rate and lane count link parameters that the driver uses for all
other computation.

Bugzilla: https://gitlab.freedesktop.org/drm/intel/-/issues/2977
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjala <ville.syrjala@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjala <ville.syrjala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125173636.1733812-2-imre.deak@intel.com
(cherry picked from commit b59c27cab257cfbff939615a87b72bce83925710)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/dp/mst: Export drm_dp_get_vc_payload_bw()

commit 83404d581471775f37f85e5261ec0d09407d8bed upstream.

This function will be needed by the next patch where the driver
calculates the BW based on driver specific parameters, so export it.

At the same time sanitize the function params, passing the more natural
link rate instead of the encoding of the same rate.

v2:
- Fix function documentation. (Lyude)

Cc: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjala <ville.syrjala@intel.com>
Cc: <stable@vger.kernel.org>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125173636.1733812-1-imre.deak@intel.com
(cherry picked from commit a321fc2b4e60fc1b39517d26c8104351636a6062)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix unsynchronized access to sev members through svm_register_enc_region

commit 19a23da53932bc8011220bd8c410cb76012de004 upstream.

Grab kvm->lock before pinning memory when registering an encrypted
region; sev_pin_memory() relies on kvm->lock being held to ensure
correctness when checking and updating the number of pinned pages.

Add a lockdep assertion to help prevent future regressions.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: x86@kernel.org
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Fixes: 1e80fdc09d12 ("KVM: SVM: Pin guest memory when SEV is active")
Signed-off-by: Peter Gonda <pgonda@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
V2
 - Fix up patch description
 - Correct file paths svm.c -> sev.c
 - Add unlock of kvm->lock on sev_pin_memory error

V1
 - https://lore.kernel.org/kvm/20210126185431.1824530-1-pgonda@google.com/

Message-Id: <20210127161524.2832400-1-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

mmc: core: Limit retries when analyse of SDIO tuples fails

commit f92e04f764b86e55e522988e6f4b6082d19a2721 upstream.

When analysing tuples fails we may loop indefinitely to retry. Let's avoid
this by using a 10s timeout and bail if not completed earlier.

Signed-off-by: Fengnan Chang <fengnanchang@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210123033230.36442-1-fengnanchang@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-pltfm: Fix linking err for sdhci-brcmstb

commit d7fb9c24209556478e65211d7a1f056f2d43cceb upstream.

The implementation of sdhci_pltfm_suspend() is only available when
CONFIG_PM_SLEEP is set, which triggers a linking error:

"undefined symbol: sdhci_pltfm_suspend" when building sdhci-brcmstb.c.

Fix this by implementing the missing stubs when CONFIG_PM_SLEEP is unset.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Fixes: 5b191dcba719 ("mmc: sdhci-brcmstb: Fix mmc timeout errors on S5 suspend")
Cc: stable@vger.kernel.org
Tested-By: Nicolas Schichan <nschichan@freeebox.fr>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smb3: fix crediting for compounding when only one request in flight

commit 91792bb8089b63b7b780251eb83939348ac58a64 upstream.

Currently we try to guess if a compound request is going to
succeed waiting for credits or not based on the number of
requests in flight. This approach doesn't work correctly
all the time because there may be only one request in
flight which is going to bring multiple credits satisfying
the compound request.

Change the behavior to fail a request only if there are no requests
in flight at all and proceed waiting for credits otherwise.

Cc: <stable@vger.kernel.org> # 5.1+
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Reviewed-by: Shyam Prasad N <nspmangalore@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smb3: Fix out-of-bounds bug in SMB2_negotiate()

commit 8d8d1dbefc423d42d626cf5b81aac214870ebaab upstream.

While addressing some warnings generated by -Warray-bounds, I found this
bug that was introduced back in 2017:

  CC [M]  fs/cifs/smb2pdu.o
fs/cifs/smb2pdu.c: In function ‘SMB2_negotiate’:
fs/cifs/smb2pdu.c:822:16: warning: array subscript 1 is above array bounds
of ‘__le16[1]’ {aka ‘short unsigned int[1]’} [-Warray-bounds]
  822 |   req->Dialects[1] = cpu_to_le16(SMB30_PROT_ID);
      |   ~~~~~~~~~~~~~^~~
fs/cifs/smb2pdu.c:823:16: warning: array subscript 2 is above array bounds
of ‘__le16[1]’ {aka ‘short unsigned int[1]’} [-Warray-bounds]
  823 |   req->Dialects[2] = cpu_to_le16(SMB302_PROT_ID);
      |   ~~~~~~~~~~~~~^~~
fs/cifs/smb2pdu.c:824:16: warning: array subscript 3 is above array bounds
of ‘__le16[1]’ {aka ‘short unsigned int[1]’} [-Warray-bounds]
  824 |   req->Dialects[3] = cpu_to_le16(SMB311_PROT_ID);
      |   ~~~~~~~~~~~~~^~~
fs/cifs/smb2pdu.c:816:16: warning: array subscript 1 is above array bounds
of ‘__le16[1]’ {aka ‘short unsigned int[1]’} [-Warray-bounds]
  816 |   req->Dialects[1] = cpu_to_le16(SMB302_PROT_ID);
      |   ~~~~~~~~~~~~~^~~

At the time, the size of array _Dialects_ was changed from 1 to 3 in struct
validate_negotiate_info_req, and then in 2019 it was changed from 3 to 4,
but those changes were never made in struct smb2_negotiate_req, which has
led to a 3 and a half years old out-of-bounds bug in function
SMB2_negotiate() (fs/cifs/smb2pdu.c).

Fix this by increasing the size of array _Dialects_ in struct
smb2_negotiate_req to 4.

Fixes: 9764c02fcbad ("SMB3: Add support for multidialect negotiate (SMB2.1 and later)")
Fixes: d5c7076b772a ("smb3: add smb3.1.1 to default dialect list")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu: Check dev->iommu in dev_iommu_priv_get() before dereferencing it

commit 4c9fb5d9140802db4db9f66c23887f43174e113c upstream.

The dev_iommu_priv_get() needs a similar check to
dev_iommu_fwspec_get() to make sure no NULL-ptr is dereferenced.

Fixes: 05a0542b456e1 ("iommu/amd: Store dev_data as device iommu private data")
Cc: stable@vger.kernel.org # v5.8+
Link: https://lore.kernel.org/r/20210202145419.29143-1-joro@8bytes.org
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=211241
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: report error instead of invalid when revalidating a dentry fails

commit 21b200d091826a83aafc95d847139b2b0582f6d1 upstream.

Assuming
- //HOST/a is mounted on /mnt
- //HOST/b is mounted on /mnt/b

On a slow connection, running 'df' and killing it while it's
processing /mnt/b can make cifs_get_inode_info() returns -ERESTARTSYS.

This triggers the following chain of events:
=> the dentry revalidation fail
=> dentry is put and released
=> superblock associated with the dentry is put
=> /mnt/b is unmounted

This patch makes cifs_d_revalidate() return the error instead of 0
(invalid) when cifs_revalidate_dentry() fails, except for ENOENT (file
deleted) and ESTALE (file recreated).

Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Suggested-by: Shyam Prasad N <nspmangalore@gmail.com>
Reviewed-by: Shyam Prasad N <nspmangalore@gmail.com>
CC: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RISC-V: Define MAXPHYSMEM_1GB only for RV32

commit de5f4b8f634beacf667e6eff334522601dd03b59 upstream.

MAXPHYSMEM_1GB option was added for RV32 because RV32 only supports 1GB
of maximum physical memory. This lead to few compilation errors reported
by kernel test robot which created the following configuration combination
which are not useful but can be configured.

1. MAXPHYSMEM_1GB & RV64
2, MAXPHYSMEM_2GB & RV32

Fix this by restricting MAXPHYSMEM_1GB for RV32 and MAXPHYSMEM_2GB only for
RV64.

Fixes: e557793799c5 ("RISC-V: Fix maximum allowed phsyical memory for RV32")
Cc: stable@vger.kernel.org
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: fix bounce buffer usage for non-sg list case

commit d4a610635400ccc382792f6be69427078541c678 upstream.

xhci driver may in some special cases need to copy small amounts
of payload data to a bounce buffer in order to meet the boundary
and alignment restrictions set by the xHCI specification.

In the majority of these cases the data is in a sg list, and
driver incorrectly assumed data is always in urb->sg when using
the bounce buffer.

If data instead is contiguous, and in urb->transfer_buffer, we may still
need to bounce buffer a small part if data starts very close (less than
packet size) to a 64k boundary.

Check if sg list is used before copying data to/from it.

Fixes: f9c589e142d0 ("xhci: TD-fragment, align the unsplittable case with a bounce buffer")
Cc: stable@vger.kernel.org
Reported-by: Andreas Hartmann <andihartmann@01019freenet.de>
Tested-by: Andreas Hartmann <andihartmann@01019freenet.de>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210203113702.436762-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scripts: use pkg-config to locate libcrypto

commit 2cea4a7a1885bd0c765089afc14f7ff0eb77864e upstream.

Otherwise build fails if the headers are not in the default location. While at
it also ask pkg-config for the libs, with fallback to the existing value.

Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Cc: stable@vger.kernel.org # 5.6.x
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

genirq/msi: Activate Multi-MSI early when MSI_FLAG_ACTIVATE_EARLY is set

commit 4c457e8cb75eda91906a4f89fc39bde3f9a43922 upstream.

When MSI_FLAG_ACTIVATE_EARLY is set (which is the case for PCI),
__msi_domain_alloc_irqs() performs the activation of the interrupt (which
in the case of PCI results in the endpoint being programmed) as soon as the
interrupt is allocated.

But it appears that this is only done for the first vector, introducing an
inconsistent behaviour for PCI Multi-MSI.

Fix it by iterating over the number of vectors allocated to each MSI
descriptor. This is easily achieved by introducing a new
"for_each_msi_vector" iterator, together with a tiny bit of refactoring.

Fixes: f3b0946d629c ("genirq/msi: Make sure PCI MSIs are activated early")
Reported-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210123122759.1781359-1-maz@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

genirq: Prevent [devm_]irq_alloc_desc from returning irq 0

commit 4c7bcb51ae25f79e3733982e5d0cd8ce8640ddfc upstream.

Since commit a85a6c86c25b ("driver core: platform: Clarify that IRQ 0
is invalid"), having a linux-irq with number 0 will trigger a WARN()
when calling platform_get_irq*() to retrieve that linux-irq.

Since [devm_]irq_alloc_desc allocs a single irq and since irq 0 is not used
on some systems, it can return 0, triggering that WARN(). This happens
e.g. on Intel Bay Trail and Cherry Trail devices using the LPE audio engine
for HDMI audio:

 0 is an invalid IRQ number
 WARNING: CPU: 3 PID: 472 at drivers/base/platform.c:238 platform_get_irq_optional+0x108/0x180
 Modules linked in: snd_hdmi_lpe_audio(+) ...

 Call Trace:
  platform_get_irq+0x17/0x30
  hdmi_lpe_audio_probe+0x4a/0x6c0 [snd_hdmi_lpe_audio]

 ---[ end trace ceece38854223a0b ]---

Change the 'from' parameter passed to __[devm_]irq_alloc_descs() by the
[devm_]irq_alloc_desc macros from 0 to 1, so that these macros will no
longer return 0.

Fixes: a85a6c86c25b ("driver core: platform: Clarify that IRQ 0 is invalid")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201221185647.226146-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libnvdimm/dimm: Avoid race between probe and available_slots_show()

commit 7018c897c2f243d4b5f1b94bc6b4831a7eab80fb upstream.

Richard reports that the following test:

(while true; do
     cat /sys/bus/nd/devices/nmem*/available_slots 2>&1 > /dev/null
 done) &

while true; do
     for i in $(seq 0 4); do
         echo nmem$i > /sys/bus/nd/drivers/nvdimm/bind
     done
     for i in $(seq 0 4); do
         echo nmem$i > /sys/bus/nd/drivers/nvdimm/unbind
     done
 done

...fails with a crash signature like:

    divide error: 0000 [#1] SMP KASAN PTI
    RIP: 0010:nd_label_nfree+0x134/0x1a0 [libnvdimm]
    [..]
    Call Trace:
     available_slots_show+0x4e/0x120 [libnvdimm]
     dev_attr_show+0x42/0x80
     ? memset+0x20/0x40
     sysfs_kf_seq_show+0x218/0x410

The root cause is that available_slots_show() consults driver-data, but
fails to synchronize against device-unbind setting up a TOCTOU race to
access uninitialized memory.

Validate driver-data under the device-lock.

Fixes: 4d88a97aa9e8 ("libnvdimm, nvdimm: dimm driver and base libnvdimm device-driver infrastructure")
Cc: <stable@vger.kernel.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Coly Li <colyli@suse.com>
Reported-by: Richard Palethorpe <rpalethorpe@suse.com>
Acked-by: Richard Palethorpe <rpalethorpe@suse.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libnvdimm/namespace: Fix visibility of namespace resource attribute

commit 13f445d65955f388499f00851dc9a86280970f7c upstream.

Legacy pmem namespaces lost support for the "resource" attribute when
the code was cleaned up to put the permission visibility in the
declaration. Restore this by listing 'resource' in the default
attributes.

A new ndctl regression test for pfn_to_online_page() corner cases builds
on this fix.

Fixes: bfd2e9140656 ("libnvdimm: Simplify root read-only definition for the 'resource' attribute")
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/161052334995.1805594.12054873528154362921.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracepoint: Fix race between tracing and removing tracepoint

commit c8b186a8d54d7e12d28e9f9686cb00ff18fc2ab2 upstream.

When executing a tracepoint, the tracepoint's func is dereferenced twice -
in __DO_TRACE() (where the returned pointer is checked) and later on in
__traceiter_##_name where the returned pointer is dereferenced without
checking which leads to races against tracepoint_removal_sync() and
crashes.

This adds a check before referencing the pointer in tracepoint_ptr_deref.

Link: https://lkml.kernel.org/r/20210202072326.120557-1-aik@ozlabs.ru
Cc: stable@vger.kernel.org
Fixes: d25e37d89dd2f ("tracepoint: Optimize using static_call()")
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Use pause-on-trace with the latency tracers

commit da7f84cdf02fd5f66864041f45018b328911b722 upstream.

Eaerlier, tracing was disabled when reading the trace file. This behavior
was changed with:

commit 06e0a548bad0 ("tracing: Do not disable tracing when reading the
trace file").

This doesn't seem to work with the latency tracers.

The above mentioned commit dit not only change the behavior but also added
an option to emulate the old behavior. The idea with this patch is to
enable this pause-on-trace option when the latency tracers are used.

Link: https://lkml.kernel.org/r/20210119164344.37500-2-Viktor.Rosendahl@bmw.de
Cc: stable@vger.kernel.org
Fixes: 06e0a548bad0 ("tracing: Do not disable tracing when reading the trace file")
Signed-off-by: Viktor Rosendahl <Viktor.Rosendahl@bmw.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kretprobe: Avoid re-registration of the same kretprobe earlier

commit 0188b87899ffc4a1d36a0badbe77d56c92fd91dc upstream.

Our system encountered a re-init error when re-registering same kretprobe,
where the kretprobe_instance in rp->free_instances is illegally accessed
after re-init.

Implementation to avoid re-registration has been introduced for kprobe
before, but lags for register_kretprobe(). We must check if kprobe has
been re-registered before re-initializing kretprobe, otherwise it will
destroy the data struct of kretprobe registered, which can lead to memory
leak, system crash, also some unexpected behaviors.

We use check_kprobe_rereg() to check if kprobe has been re-registered
before running register_kretprobe()'s body, for giving a warning message
and terminate registration process.

Link: https://lkml.kernel.org/r/20210128124427.2031088-1-bobo.shaobowang@huawei.com
Cc: stable@vger.kernel.org
Fixes: 1f0ab40976460 ("kprobes: Prevent re-registration of the same kprobe")
[ The above commit should have been done for kretprobes too ]
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@linux.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Signed-off-by: Cheng Jian <cj.chengjian@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing/kprobe: Fix to support kretprobe events on unloaded modules

commit 97c753e62e6c31a404183898d950d8c08d752dbd upstream.

Fix kprobe_on_func_entry() returns error code instead of false so that
register_kretprobe() can return an appropriate error code.

append_trace_kprobe() expects the kprobe registration returns -ENOENT
when the target symbol is not found, and it checks whether the target
module is unloaded or not. If the target module doesn't exist, it
defers to probe the target symbol until the module is loaded.

However, since register_kretprobe() returns -EINVAL instead of -ENOENT
in that case, it always fail on putting the kretprobe event on unloaded
modules. e.g.

Kprobe event:
/sys/kernel/debug/tracing # echo p xfs:xfs_end_io >> kprobe_events
[   16.515574] trace_kprobe: This probe might be able to register after target module is loaded. Continue.

Kretprobe event: (p -> r)
/sys/kernel/debug/tracing # echo r xfs:xfs_end_io >> kprobe_events
sh: write error: Invalid argument
/sys/kernel/debug/tracing # cat error_log
[   41.122514] trace_kprobe: error: Failed to register probe event
  Command: r xfs:xfs_end_io
             ^

To fix this bug, change kprobe_on_func_entry() to detect symbol lookup
failure and return -ENOENT in that case. Otherwise it returns -EINVAL
or 0 (succeeded, given address is on the entry).

Link: https://lkml.kernel.org/r/161176187132.1067016.8118042342894378981.stgit@devnote2
Cc: stable@vger.kernel.org
Fixes: 59158ec4aef7 ("tracing/kprobes: Check the probe on unloaded module correctly")
Reported-by: Jianlin Lv <Jianlin.Lv@arm.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fgraph: Initialize tracing_graph_pause at task creation

commit 7e0a9220467dbcfdc5bc62825724f3e52e50ab31 upstream.

On some archs, the idle task can call into cpu_suspend(). The cpu_suspend()
will disable or pause function graph tracing, as there's some paths in
bringing down the CPU that can have issues with its return address being
modified. The task_struct structure has a "tracing_graph_pause" atomic
counter, that when set to something other than zero, the function graph
tracer will not modify the return address.

The problem is that the tracing_graph_pause counter is initialized when the
function graph tracer is enabled. This can corrupt the counter for the idle
task if it is suspended in these architectures.

   CPU 1 CPU 2
   ----- -----
  do_idle()
    cpu_suspend()
      pause_graph_tracing()
          task_struct->tracing_graph_pause++ (0 -> 1)

start_graph_tracing()
  for_each_online_cpu(cpu) {
    ftrace_graph_init_idle_task(cpu)
      task-struct->tracing_graph_pause = 0 (1 -> 0)

      unpause_graph_tracing()
          task_struct->tracing_graph_pause-- (0 -> -1)

The above should have gone from 1 to zero, and enabled function graph
tracing again. But instead, it is set to -1, which keeps it disabled.

There's no reason that the field tracing_graph_pause on the task_struct can
not be initialized at boot up.

Cc: stable@vger.kernel.org
Fixes: 380c4b1411ccd ("tracing/function-graph-tracer: append the tracing_graph_flag")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=211339
Reported-by: pierre.gondois@arm.com
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpiolib: free device name on error path to fix kmemleak

commit c351bb64cbe67029c68dea3adbec1b9508c6ff0f upstream.

In gpiochip_add_data_with_key, we should check the return value of
dev_set_name to ensure that device name is allocated successfully
and then add a label on the error path to free device name to fix
kmemleak as below:

unreferenced object 0xc2d6fc40 (size 64):
  comm "kworker/0:1", pid 16, jiffies 4294937425 (age 65.120s)
  hex dump (first 32 bytes):
    67 70 69 6f 63 68 69 70 30 00 1a c0 54 63 1a c0  gpiochip0...Tc..
    0c ed 84 c0 48 ed 84 c0 3c ee 84 c0 10 00 00 00  ....H...<.......
  backtrace:
    [<962810f7>] kobject_set_name_vargs+0x2c/0xa0
    [<f50797e6>] dev_set_name+0x2c/0x5c
    [<94abbca9>] gpiochip_add_data_with_key+0xfc/0xce8
    [<5c4193e0>] omap_gpio_probe+0x33c/0x68c
    [<3402f137>] platform_probe+0x58/0xb8
    [<7421e210>] really_probe+0xec/0x3b4
    [<000f8ada>] driver_probe_device+0x58/0xb4
    [<67e0f7f7>] bus_for_each_drv+0x80/0xd0
    [<4de545dc>] __device_attach+0xe8/0x15c
    [<2e4431e7>] bus_probe_device+0x84/0x8c
    [<c18b1de9>] device_add+0x384/0x7c0
    [<5aff2995>] of_platform_device_create_pdata+0x8c/0xb8
    [<061c3483>] of_platform_bus_create+0x198/0x230
    [<5ee6d42a>] of_platform_populate+0x60/0xb8
    [<2647300f>] sysc_probe+0xd18/0x135c
    [<3402f137>] platform_probe+0x58/0xb8

Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: fix station rate table updates on assoc

commit 18fe0fae61252b5ae6e26553e2676b5fac555951 upstream.

If the driver uses .sta_add, station entries are only uploaded after the sta
is in assoc state. Fix early station rate table updates by deferring them
until the sta has been uploaded.

Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210201083324.3134-1-nbd@nbd.name
[use rcu_access_pointer() instead since we won't dereference here]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ovl: implement volatile-specific fsync error behaviour

commit 335d3fc57941e5c6164c69d439aec1cb7a800876 upstream.

Overlayfs's volatile option allows the user to bypass all forced sync calls
to the upperdir filesystem. This comes at the cost of safety. We can never
ensure that the user's data is intact, but we can make a best effort to
expose whether or not the data is likely to be in a bad state.

The best way to handle this in the time being is that if an overlayfs's
upperdir experiences an error after a volatile mount occurs, that error
will be returned on fsync, fdatasync, sync, and syncfs. This is
contradictory to the traditional behaviour of VFS which fails the call
once, and only raises an error if a subsequent fsync error has occurred,
and been raised by the filesystem.

One awkward aspect of the patch is that we have to manually set the
superblock's errseq_t after the sync_fs callback as opposed to just
returning an error from syncfs. This is because the call chain looks
something like this:

sys_syncfs ->
sync_filesystem ->
__sync_filesystem ->
/* The return value is ignored here
sb->s_op->sync_fs(sb)
_sync_blockdev
/* Where the VFS fetches the error to raise to userspace */
errseq_check_and_advance

Because of this we call errseq_set every time the sync_fs callback occurs.
Due to the nature of this seen / unseen dichotomy, if the upperdir is an
inconsistent state at the initial mount time, overlayfs will refuse to
mount, as overlayfs cannot get a snapshot of the upperdir's errseq that
will increment on error until the user calls syncfs.

Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Fixes: c86243b090bc ("ovl: provide a mount option "volatile"")
Cc: stable@vger.kernel.org
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ovl: avoid deadlock on directory ioctl

commit b854cc659dcb80f172cb35dbedc15d39d49c383f upstream.

The function ovl_dir_real_file() currently uses the inode lock to serialize
writes to the od->upperfile field.

However, this function will get called by ovl_ioctl_set_flags(), which
utilizes the inode lock too.  In this case ovl_dir_real_file() will try to
claim a lock that is owned by a function in its call stack, which won't get
released before ovl_dir_real_file() returns.

Fix by replacing the open coded compare and exchange by an explicit atomic
op.

Fixes: 61536bed2149 ("ovl: support [S|G]ETFLAGS and FS[S|G]ETXATTR ioctls for directories")
Cc: stable@vger.kernel.org # v5.10
Reported-by: Icenowy Zheng <icenowy@aosc.io>
Tested-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ovl: fix dentry leak in ovl_get_redirect

commit e04527fefba6e4e66492f122cf8cc6314f3cf3bf upstream.

We need to lock d_parent->d_lock before dget_dlock, or this may
have d_lockref updated parallelly like calltrace below which will
cause dentry->d_lockref leak and risk a crash.

     CPU 0                                CPU 1
ovl_set_redirect                       lookup_fast
  ovl_get_redirect                       __d_lookup
    dget_dlock
      //no lock protection here            spin_lock(&dentry->d_lock)
      dentry->d_lockref.count++            dentry->d_lockref.count++

[   49.799059] PGD 800000061fed7067 P4D 800000061fed7067 PUD 61fec5067 PMD 0
[   49.799689] Oops: 0002 [#1] SMP PTI
[   49.800019] CPU: 2 PID: 2332 Comm: node Not tainted 4.19.24-7.20.al7.x86_64 #1
[   49.800678] Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 8a46cfe 04/01/2014
[   49.801380] RIP: 0010:_raw_spin_lock+0xc/0x20
[   49.803470] RSP: 0018:ffffac6fc5417e98 EFLAGS: 00010246
[   49.803949] RAX: 0000000000000000 RBX: ffff93b8da3446c0 RCX: 0000000a00000000
[   49.804600] RDX: 0000000000000001 RSI: 000000000000000a RDI: 0000000000000088
[   49.805252] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffff993cf040
[   49.805898] R10: ffff93b92292e580 R11: ffffd27f188a4b80 R12: 0000000000000000
[   49.806548] R13: 00000000ffffff9c R14: 00000000fffffffe R15: ffff93b8da3446c0
[   49.807200] FS:  00007ffbedffb700(0000) GS:ffff93b927880000(0000) knlGS:0000000000000000
[   49.807935] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   49.808461] CR2: 0000000000000088 CR3: 00000005e3f74006 CR4: 00000000003606a0
[   49.809113] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   49.809758] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   49.810410] Call Trace:
[   49.810653]  d_delete+0x2c/0xb0
[   49.810951]  vfs_rmdir+0xfd/0x120
[   49.811264]  do_rmdir+0x14f/0x1a0
[   49.811573]  do_syscall_64+0x5b/0x190
[   49.811917]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   49.812385] RIP: 0033:0x7ffbf505ffd7
[   49.814404] RSP: 002b:00007ffbedffada8 EFLAGS: 00000297 ORIG_RAX: 0000000000000054
[   49.815098] RAX: ffffffffffffffda RBX: 00007ffbedffb640 RCX: 00007ffbf505ffd7
[   49.815744] RDX: 0000000004449700 RSI: 0000000000000000 RDI: 0000000006c8cd50
[   49.816394] RBP: 00007ffbedffaea0 R08: 0000000000000000 R09: 0000000000017d0b
[   49.817038] R10: 0000000000000000 R11: 0000000000000297 R12: 0000000000000012
[   49.817687] R13: 00000000072823d8 R14: 00007ffbedffb700 R15: 00000000072823d8
[   49.818338] Modules linked in: pvpanic cirrusfb button qemu_fw_cfg atkbd libps2 i8042
[   49.819052] CR2: 0000000000000088
[   49.819368] ---[ end trace 4e652b8aa299aa2d ]---
[   49.819796] RIP: 0010:_raw_spin_lock+0xc/0x20
[   49.821880] RSP: 0018:ffffac6fc5417e98 EFLAGS: 00010246
[   49.822363] RAX: 0000000000000000 RBX: ffff93b8da3446c0 RCX: 0000000a00000000
[   49.823008] RDX: 0000000000000001 RSI: 000000000000000a RDI: 0000000000000088
[   49.823658] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffff993cf040
[   49.825404] R10: ffff93b92292e580 R11: ffffd27f188a4b80 R12: 0000000000000000
[   49.827147] R13: 00000000ffffff9c R14: 00000000fffffffe R15: ffff93b8da3446c0
[   49.828890] FS:  00007ffbedffb700(0000) GS:ffff93b927880000(0000) knlGS:0000000000000000
[   49.830725] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   49.832359] CR2: 0000000000000088 CR3: 00000005e3f74006 CR4: 00000000003606a0
[   49.834085] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   49.835792] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Cc: <stable@vger.kernel.org>
Fixes: a6c606551141 ("ovl: redirect on rename-dir")
Signed-off-by: Liangyan <liangyan.peng@linux.alibaba.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thunderbolt: Fix possible NULL pointer dereference in tb_acpi_add_link()

commit 4d395c5e74398f664405819330e5a298da37f655 upstream.

When we walk up the device hierarchy in tb_acpi_add_link() make sure we
break the loop if the device has no parent. Otherwise we may crash the
kernel by dereferencing a NULL pointer.

Fixes: b2be2b05cf3b ("thunderbolt: Create device links from ACPI description")
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kbuild: fix duplicated flags in DEBUG_CFLAGS

[ Upstream commit 315da87c0f99a4741a639782d59dae44878199f5 ]

Sedat Dilek noticed duplicated flags in DEBUG_CFLAGS when building
deb-pkg with CONFIG_DEBUG_INFO. For example, 'make CC=clang bindeb-pkg'
reproduces the issue.

Kbuild recurses to the top Makefile for some targets such as package
builds.

With commit 121c5d08d53c ("kbuild: Only add -fno-var-tracking-assignments
for old GCC versions") applied, DEBUG_CFLAGS is now reset only when
CONFIG_CC_IS_GCC=y.

Fix it to reset DEBUG_CFLAGS all the time.

Fixes: 121c5d08d53c ("kbuild: Only add -fno-var-tracking-assignments for old GCC versions")
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Mark Wielaard <mark@klomp.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

memblock: do not start bottom-up allocations with kernel_end

[ Upstream commit 2dcb3964544177c51853a210b6ad400de78ef17d ]

With kaslr the kernel image is placed at a random place, so starting the
bottom-up allocation with the kernel_end can result in an allocation
failure and a warning like this one:

  hugetlb_cma: reserve 2048 MiB, up to 2048 MiB per node
  ------------[ cut here ]------------
  memblock: bottom-up allocation failed, memory hotremove may be affected
  WARNING: CPU: 0 PID: 0 at mm/memblock.c:332 memblock_find_in_range_node+0x178/0x25a
  Modules linked in:
  CPU: 0 PID: 0 Comm: swapper Not tainted 5.10.0+ #1169
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
  RIP: 0010:memblock_find_in_range_node+0x178/0x25a
  Code: e9 6d ff ff ff 48 85 c0 0f 85 da 00 00 00 80 3d 9b 35 df 00 00 75 15 48 c7 c7 c0 75 59 88 c6 05 8b 35 df 00 01 e8 25 8a fa ff <0f> 0b 48 c7 44 24 20 ff ff ff ff 44 89 e6 44 89 ea 48 c7 c1 70 5c
  RSP: 0000:ffffffff88803d18 EFLAGS: 00010086 ORIG_RAX: 0000000000000000
  RAX: 0000000000000000 RBX: 0000000240000000 RCX: 00000000ffffdfff
  RDX: 00000000ffffdfff RSI: 00000000ffffffea RDI: 0000000000000046
  RBP: 0000000100000000 R08: ffffffff88922788 R09: 0000000000009ffb
  R10: 00000000ffffe000 R11: 3fffffffffffffff R12: 0000000000000000
  R13: 0000000000000000 R14: 0000000080000000 R15: 00000001fb42c000
  FS:  0000000000000000(0000) GS:ffffffff88f71000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: ffffa080fb401000 CR3: 00000001fa80a000 CR4: 00000000000406b0
  Call Trace:
    memblock_alloc_range_nid+0x8d/0x11e
    cma_declare_contiguous_nid+0x2c4/0x38c
    hugetlb_cma_reserve+0xdc/0x128
    flush_tlb_one_kernel+0xc/0x20
    native_set_fixmap+0x82/0xd0
    flat_get_apic_id+0x5/0x10
    register_lapic_address+0x8e/0x97
    setup_arch+0x8a5/0xc3f
    start_kernel+0x66/0x547
    load_ucode_bsp+0x4c/0xcd
    secondary_startup_64_no_verify+0xb0/0xbb
  random: get_random_bytes called from __warn+0xab/0x110 with crng_init=0
  ---[ end trace f151227d0b39be70 ]---

At the same time, the kernel image is protected with memblock_reserve(),
so we can just start searching at PAGE_SIZE.  In this case the bottom-up
allocation has the same chances to success as a top-down allocation, so
there is no reason to fallback in the case of a failure.  All together it
simplifies the logic.

Link: https://lkml.kernel.org/r/20201217201214.3414100-2-guro@fb.com
Fixes: 8fabc623238e ("powerpc: Ensure that swiotlb buffer is allocated from low memory")
Signed-off-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Wonhyuk Yang <vvghjk1234@gmail.com>
Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vdpa/mlx5: Restore the hardware used index after change map

[ Upstream commit b35ccebe3ef76168aa2edaa35809c0232cb3578e ]

When a change of memory map occurs, the hardware resources are destroyed
and then re-created again with the new memory map. In such case, we need
to restore the hardware available and used indices. The driver failed to
restore the used index which is added here.

Also, since the driver also fails to reset the available and used
indices upon device reset, fix this here to avoid regression caused by
the fact that used index may not be zero upon device reset.

Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210204073618.36336-1-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvmet-tcp: fix out-of-bounds access when receiving multiple h2cdata PDUs

[ Upstream commit cb8563f5c735a042ea2dd7df1ad55ae06d63ffeb ]

When the host sends multiple h2cdata PDUs, we keep track on
the receive progress and calculate the scatterlist index and
offsets.

The issue is that sg_offset should only be kept for the first
iov entry we map in the iovec as this is the difference between
our cursor and the sg entry offset itself.

In addition, the sg index was calculated wrong because we should
not round up when dividing the command byte offset with PAG_SIZE.

Fixes: 872d26a391da ("nvmet-tcp: add NVMe over TCP target driver")
Reported-by: Narayan Ayalasomayajula <Narayan.Ayalasomayajula@wdc.com>
Tested-by: Narayan Ayalasomayajula <Narayan.Ayalasomayajula@wdc.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-mode

[ Upstream commit a900cac3750b9f0b8f5ed0503d9c6359532f644d ]

BPi Pro needs TX and RX delay for Gbit to work reliable and avoid high
packet loss rates. The realtek phy driver overrides the settings of the
pull ups for the delays, so fix this for BananaPro.

Fix the phy-mode description to correctly reflect this so that the
implementation doesn't reconfigure the delays incorrectly. This
happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e
rx/tx delay config").

Fixes: 10662a33dcd9 ("ARM: dts: sun7i: Add dts file for Bananapro board")
Signed-off-by: Hermann Lauer <Hermann.Lauer@uni-heidelberg.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210128111842.GA11919@lemon.iwr.uni-heidelberg.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ipa: pass correct dma_handle to dma_free_coherent()

[ Upstream commit 4ace7a6e287b7e3b33276cd9fe870c326f880480 ]

The "ring->addr = addr;" assignment is done a few lines later so we
can't use "ring->addr" yet.  The correct dma_handle is "addr".

Fixes: 650d1603825d ("soc: qcom: ipa: the generic software interface")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/YBjpTU2oejkNIULT@mwanda
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

r8169: fix WoL on shutdown if CONFIG_DEBUG_SHIRQ is set

[ Upstream commit cc9f07a838c4988ed244d0907cb71d54b85482a5 ]

So far phy_disconnect() is called before free_irq(). If CONFIG_DEBUG_SHIRQ
is set and interrupt is shared, then free_irq() creates an "artificial"
interrupt by calling the interrupt handler. The "link change" flag is set
in the interrupt status register, causing phylib to eventually call
phy_suspend(). Because the net_device is detached from the PHY already,
the PHY driver can't recognize that WoL is configured and powers down the
PHY.

Fixes: f1e911d5d0df ("r8169: add basic phylib support")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/fe732c2c-a473-9088-3974-df83cfbd6efd@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: mvpp2: TCAM entry enable should be written after SRAM data

[ Upstream commit 43f4a20a1266d393840ce010f547486d14cc0071 ]

Last TCAM data contains TCAM enable bit.
It should be written after SRAM data before entry enabled.

Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Link: https://lore.kernel.org/r/1612172139-28343-1-git-send-email-stefanc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: lapb: Copy the skb before sending a packet

[ Upstream commit 88c7a9fd9bdd3e453f04018920964c6f848a591a ]

When sending a packet, we will prepend it with an LAPB header.
This modifies the shared parts of a cloned skb, so we should copy the
skb rather than just clone it, before we prepend the header.

In "Documentation/networking/driver.rst" (the 2nd point), it states
that drivers shouldn't modify the shared parts of a cloned skb when
transmitting.

The "dev_queue_xmit_nit" function in "net/core/dev.c", which is called
when an skb is being sent, clones the skb and sents the clone to
AF_PACKET sockets. Because the LAPB drivers first remove a 1-byte
pseudo-header before handing over the skb to us, if we don't copy the
skb before prepending the LAPB header, the first byte of the packets
received on AF_PACKET sockets can be corrupted.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Link: https://lore.kernel.org/r/20210201055706.415842-1-xie.he.0141@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Release skb in case of failure in tc update skb

[ Upstream commit a34ffec8af8ff1c730697a99e09ec7b74a3423b6 ]

In case of failure in tc update skb the packet is dropped
without freeing the skb.

Fixed by freeing the skb in case failure in tc update skb.

Fixes: d6d27782864f ("net/mlx5: E-Switch, Restore chain id on miss")
Fixes: c75690972228 ("net/mlx5e: Add tc chains offload support for nic flows")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Update max_opened_tc also when channels are closed

[ Upstream commit 5a2ba25a55c4dc0f143567c99aede768b6628ebd ]

max_opened_tc is used for stats, so that potentially non-zero stats
won't disappear when num_tc decreases. However, mlx5e_setup_tc_mqprio
fails to update it in the flow where channels are closed.

This commit fixes it. The new value of priv->channels.params.num_tc is
always checked on exit. In case of errors it will just be the old value,
and in case of success it will be the updated value.

Fixes: 05909babce53 ("net/mlx5e: Avoid reset netdev stats on configuration changes")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Fix leak upon failure of rule creation

[ Upstream commit a5bfe6b4675e0eefbd9418055b5cc6e89af27eb4 ]

When creation of a new rule that requires allocation of an FTE fails,
need to call to tree_put_node on the FTE in order to release its'
resource.

Fixes: cefc23554fc2 ("net/mlx5: Fix FTE cleanup")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Alaa Hleihel <alaa@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Fix function calculation for page trees

[ Upstream commit ed5e83a3c02948dad9dc4e68fb4e535baa5da630 ]

The function calculation always results in a value of 0. This works
generally, but when the release all pages feature is enabled it will
result in crashes.

Fixes: 0aa128475d33 ("net/mlx5: Maintain separate page trees for ECPF and PF functions")
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ibmvnic: device remove has higher precedence over reset

[ Upstream commit 5e9eff5dfa460cd1a74b7c1fde4fced7c04383af ]

Returning -EBUSY in ibmvnic_remove() does not actually hold the
removal procedure since driver core doesn't care for the return
value (see __device_release_driver() in drivers/base/dd.c
calling dev->bus->remove()) though vio_bus_remove
(in arch/powerpc/platforms/pseries/vio.c) records the
return value and passes it on. [1]

During the device removal precedure, checking for resetting
bit is dropped so that we can continue executing all the
cleanup calls in the rest of the remove function. Otherwise,
it can cause latent memory leaks and kernel crashes.

[1] https://lore.kernel.org/linuxppc-dev/20210117101242.dpwayq6wdgfdzirl@pengutronix.de/T/#m48f5befd96bc9842ece2a3ad14f4c27747206a53
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: 7d7195a026ba ("ibmvnic: Do not process device remove during device reset")
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Link: https://lore.kernel.org/r/20210129043402.95744-1-ljp@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Revert "i40e: don't report link up for a VF who hasn't enabled queues"

[ Upstream commit f559a356043a55bab25a4c00505ea65c50a956fb ]

This reverts commit 2ad1274fa35ace5c6360762ba48d33b63da2396c

VF queues were not brought up when PF was brought up after being
downed if the VF driver disabled VFs queues during PF down.
This could happen in some older or external VF driver implementations.
The problem was that PF driver used vf->queues_enabled as a condition
to decide what link-state it would send out which caused the issue.

Remove the check for vf->queues_enabled in the VF link notify.
Now VF will always be notified of the current link status.
Also remove the queues_enabled member from i40e_vf structure as it is
not used anymore. Otherwise VNF implementation was broken and caused
a link flap.

The original commit was a workaround to avoid breaking existing VFs though
it's really a fault of the VF code not the PF. The commit should be safe to
revert as all of the VFs we know of have been fixed. Also, since we now
know there is a related bug in the workaround, removing it is preferred.

Fixes: 2ad1274fa35a ("i40e: don't report link up for a VF who hasn't enabled")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igc: check return value of ret_val in igc_config_fc_after_link_up

[ Upstream commit b881145642ce0bbe2be521e0882e72a5cebe93b8 ]

Check return value from ret_val to make error check actually work.

Fixes: 4eb8080143a9 ("igc: Add setup link functionality")
Signed-off-by: Kevin Lo <kevlo@kevlo.org>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igc: set the default return value to -IGC_ERR_NVM in igc_write_nvm_srwr

[ Upstream commit ebc8d125062e7dccb7922b2190b097c20d88ad96 ]

This patch sets the default return value to -IGC_ERR_NVM in
igc_write_nvm_srwr. Without this change it wouldn't lead to a shadow RAM
write EEWR timeout.

Fixes: ab4056126813 ("igc: Add NVM support")
Signed-off-by: Kevin Lo <kevlo@kevlo.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: Fix NFS READs that start at non-page-aligned offsets

[ Upstream commit bad4c6eb5eaa8300e065bd4426727db5141d687d ]

Anj Duvnjak reports that the Kodi.tv NFS client is not able to read
video files from a v5.10.11 Linux NFS server.

The new sendpage-based TCP sendto logic was not attentive to non-
zero page_base values. nfsd_splice_read() sets that field when a
READ payload starts in the middle of a page.

The Linux NFS client rarely emits an NFS READ that is not page-
aligned. All of my testing so far has been with Linux clients, so I
missed this one.

Reported-by: A. Duvnjak <avian@extremenerds.net>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211471
Fixes: 4a85a6a3320b ("SUNRPC: Handle TCP socket sends with kernel_sendpage() again")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: A. Duvnjak <avian@extremenerds.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: ls1046a: fix dcfg address range

[ Upstream commit aa880c6f3ee6dbd0d5ab02026a514ff8ea0a3328 ]

Dcfg was overlapping with clockgen address space which resulted
in failure in memory allocation for dcfg. According regs description
dcfg size should not be bigger than 4KB.

Signed-off-by: Zyta Szpak <zr@semihalf.com>
Fixes: 8126d88162a5 ("arm64: dts: add QorIQ LS1046A SoC support")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rxrpc: Fix deadlock around release of dst cached on udp tunnel

[ Upstream commit 5399d52233c47905bbf97dcbaa2d7a9cc31670ba ]

AF_RXRPC sockets use UDP ports in encap mode.  This causes socket and dst
from an incoming packet to get stolen and attached to the UDP socket from
whence it is leaked when that socket is closed.

When a network namespace is removed, the wait for dst records to be cleaned
up happens before the cleanup of the rxrpc and UDP socket, meaning that the
wait never finishes.

Fix this by moving the rxrpc (and, by dependence, the afs) private
per-network namespace registrations to the device group rather than subsys
group.  This allows cached rxrpc local endpoints to be cleared and their
UDP sockets closed before we try waiting for the dst records.

The symptom is that lines looking like the following:

unregister_netdevice: waiting for lo to become free

get emitted at regular intervals after running something like the
referenced syzbot test.

Thanks to Vadim for tracking this down and work out the fix.

Reported-by: syzbot+df400f2f24a1677cd7e0@syzkaller.appspotmail.com
Reported-by: Vadim Fedorenko <vfedorenko@novek.ru>
Fixes: 5271953cad31 ("rxrpc: Use the UDP encap_rcv hook")
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vadim Fedorenko <vfedorenko@novek.ru>
Link: https://lore.kernel.org/r/161196443016.3868642.5577440140646403533.stgit@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

r8169: work around RTL8125 UDP hw bug

[ Upstream commit 8d520b4de3edca4f4fb242b5ddc659b6a9b9e65e ]

It was reported that on RTL8125 network breaks under heavy UDP load,
e.g. torrent traffic ([0], from comment 27). Realtek confirmed a hw bug
and provided me with a test version of the r8125 driver including a
workaround. Tests confirmed that the workaround fixes the issue.
I modified the original version of the workaround to meet mainline
code style.

[0] https://bugzilla.kernel.org/show_bug.cgi?id=209839

v2:
- rebased to net
v3:
- make rtl_skb_is_udp() more robust and use skb_header_pointer()
  to access the ip(v6) header
v4:
- remove dependency on ptp_classify.h
- replace magic number with offsetof(struct udphdr, len)

Fixes: f1bce4ad2f1c ("r8169: add support for RTL8125")
Tested-by: xplo <xplo.bn@gmail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/6e453d49-1801-e6de-d5f7-d7e6c7526c8f@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: meson: switch TFLASH_VDD_EN pin to open drain on Odroid-C4

[ Upstream commit daf12bee07b9e2f38216f58aca7ac4e4e66a7146 ]

For the proper reboot Odroid-C4 board requires to switch TFLASH_VDD_EN
pin to the high impedance mode, otherwise the board is stuck in the
middle of loading early stages of the bootloader from SD card.

This can be achieved by using the OPEN_DRAIN flag instead of the
ACTIVE_HIGH, what will leave the pin in input mode to achieve high state
(pin has the pull-up) and solve the issue.

Suggested-by: Neil Armstrong <narmstrong@baylibre.com>
Fixes: 326e57518b0d ("arm64: dts: meson-sm1: add support for Hardkernel ODROID-C4")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210122055218.27241-1-m.szyprowski@samsung.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, preload: Fix build when $(O) points to a relative path

[ Upstream commit 150a27328b681425c8cab239894a48f2aeb870e9 ]

Building the kernel with CONFIG_BPF_PRELOAD, and by providing a relative
path for the output directory, may fail with the following error:

  $ make O=build bindeb-pkg
  ...
  /.../linux/tools/scripts/Makefile.include:5: *** O=build does not exist.  Stop.
  make[7]: *** [/.../linux/kernel/bpf/preload/Makefile:9: kernel/bpf/preload/libbpf.a] Error 2
  make[6]: *** [/.../linux/scripts/Makefile.build:500: kernel/bpf/preload] Error 2
  make[5]: *** [/.../linux/scripts/Makefile.build:500: kernel/bpf] Error 2
  make[4]: *** [/.../linux/Makefile:1799: kernel] Error 2
  make[4]: *** Waiting for unfinished jobs....

In the case above, for the "bindeb-pkg" target, the error is produced by
the "dummy" check in Makefile.include, called from libbpf's Makefile.
This check changes directory to $(PWD) before checking for the existence
of $(O). But at this step we have $(PWD) pointing to "/.../linux/build",
and $(O) pointing to "build". So the Makefile.include tries in fact to
assert the existence of a directory named "/.../linux/build/build",
which does not exist.

Note that the error does not occur for all make targets and
architectures combinations. This was observed on x86 for "bindeb-pkg",
or for a regular build for UML [0].

Here are some details. The root Makefile recursively calls itself once,
after changing directory to $(O). The content for the variable $(PWD) is
preserved across recursive calls to make, so it is unchanged at this
step. For "bindeb-pkg", $(PWD) is eventually updated because the target
writes a new Makefile (as debian/rules) and calls it indirectly through
dpkg-buildpackage. This script does not preserve $(PWD), which is reset
to the current working directory when the target in debian/rules is
called.

Although not investigated, it seems likely that something similar causes
UML to change its value for $(PWD).

Non-trivial fixes could be to remove the use of $(PWD) from the "dummy"
check, or to make sure that $(PWD) and $(O) are preserved or updated to
always play well and form a valid $(PWD)/$(O) path across the different
targets and architectures. Instead, we take a simpler approach and just
update $(O) when calling libbpf's Makefile, so it points to an absolute
path which should always resolve for the "dummy" check run (through
includes) by that Makefile.

David Gow previously posted a slightly different version of this patch
as a RFC [0], two months ago or so.

  [0] https://lore.kernel.org/bpf/20201119085022.3606135-1-davidgow@google.com/t/#u

Fixes: d71fa5c9763c ("bpf: Add kernel module with user mode driver that populates bpffs.")
Reported-by: David Gow <davidgow@google.com>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/bpf/20210126161320.24561-1-quentin@isovalent.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

um: virtio: free vu_dev only with the contained struct device

[ Upstream commit f4172b084342fd3f9e38c10650ffe19eac30d8ce ]

Since struct device is refcounted, we shouldn't free the vu_dev
immediately when it's removed from the platform device, but only
when the references actually all go away. Move the freeing to
the release to accomplish that.

Fixes: 5d38f324993f ("um: drivers: Add virtio vhost-user driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, inode_storage: Put file handler if no storage was found

[ Upstream commit b9557caaf872271671bdc1ef003d72f421eb72f6 ]

Put file f if inode_storage_ptr() returns NULL.

Fixes: 8ea636848aca ("bpf: Implement bpf_local_storage for inodes")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/bpf/20210121020856.25507-1-bianpan2016@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, cgroup: Fix problematic bounds check

[ Upstream commit f4a2da755a7e1f5d845c52aee71336cee289935a ]

Since ctx.optlen is signed, a larger value than max_value could be
passed, as it is later on used as unsigned, which causes a WARN_ON_ONCE
in the copy_to_user.

Fixes: 0d01da6afc54 ("bpf: implement getsockopt and setsockopt hooks")
Signed-off-by: Loris Reiff <loris.reiff@liblor.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20210122164232.61770-2-loris.reiff@liblor.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, cgroup: Fix optlen WARN_ON_ONCE toctou

[ Upstream commit bb8b81e396f7afbe7c50d789e2107512274d2a35 ]

A toctou issue in `__cgroup_bpf_run_filter_getsockopt` can trigger a
WARN_ON_ONCE in a check of `copy_from_user`.

`*optlen` is checked to be non-negative in the individual getsockopt
functions beforehand. Changing `*optlen` in a race to a negative value
will result in a `copy_from_user(ctx.optval, optval, ctx.optlen)` with
`ctx.optlen` being a negative integer.

Fixes: 0d01da6afc54 ("bpf: implement getsockopt and setsockopt hooks")
Signed-off-by: Loris Reiff <loris.reiff@liblor.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20210122164232.61770-1-loris.reiff@liblor.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>

vdpa/mlx5: Fix memory key MTT population

[ Upstream commit 710eb8e32d04714452759f2b66884bfa7e97d495 ]

map_direct_mr() assumed that the number of scatter/gather entries
returned by dma_map_sg_attrs() was equal to the number of segments in
the sgl list. This led to wrong population of the mkey object. Fix this
by properly referring to the returned value.

The hardware expects each MTT entry to contain the DMA address of a
contiguous block of memory of size (1 << mr->log_size) bytes.
dma_map_sg_attrs() can coalesce several sg entries into a single
scatter/gather entry of contiguous DMA range so we need to scan the list
and refer to the size of each s/g entry.

In addition, get rid of fill_sg() which effect is overwritten by
populate_mtts().

Fixes: 94abbccdf291 ("vdpa/mlx5: Add shared memory registration code")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210107071845.GA224876@mtl-vdi-166.wap.labs.mlnx
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: stm32: Fix GPIO hog flags on DHCOM DRC02

[ Upstream commit 83d411224025ac1baab981e3d2f5d29e7761541d ]

The GPIO hog flags are ignored by gpiolib-of.c now, set the flags to 0.
Since GPIO_ACTIVE_HIGH is defined as 0, this change only increases the
correctness of the DT.

Fixes: fde180f06d7b ("ARM: dts: stm32: Add DHSOM based DRC02 board")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: stm32: Disable optional TSC2004 on DRC02 board

[ Upstream commit 087698939f30d489e785d7df3e6aa5dce2487b39 ]

The DRC02 has no use for the on-SoM touchscreen controller, and the
on-SoM touchscreen controller may not even be populated, which then
results in error messages in kernel log. Disable the touchscreen
controller in DT.

Fixes: fde180f06d7b ("ARM: dts: stm32: Add DHSOM based DRC02 board")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: stm32: Disable WP on DHCOM uSD slot

[ Upstream commit 063a60634d48ee89f697371c9850c9370e494f22 ]

The uSD slot has no WP detection, disable it.

Fixes: 34e0c7847dcf ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: stm32: Connect card-detect signal on DHCOM

[ Upstream commit 1a9b001237f85d3cf11a408c2daca6a2245b2add ]

The DHCOM SoM uSD slot card detect signal is connected to GPIO PG1,
describe it in the DT.

Fixes: 34e0c7847dcf ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: stm32: Fix polarity of the DH DRC02 uSD card detect

[ Upstream commit a0572c0734e4926ac51a31f97c12f752e1cdc7c8 ]

The uSD card detect signal on the DH DRC02 is active-high, with
a default pull down resistor on the board. Invert the polarity.

Fixes: fde180f06d7b ("ARM: dts: stm32: Add DHSOM based DRC02 board")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
--
Note that this could not be tested on prototype SoMs, now that it is
tested, this issue surfaced, so it needs to be fixed.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: rockchip: Use only supported PCIe link speed on Pinebook Pro

[ Upstream commit 642fb2795290c4abe629ca34fb8ff6d78baa9fd3 ]

On Pinebook Pro laptops with an NVMe SSD installed, prevent random
crashes in the NVMe driver by not attempting to use a PCIe link speed
higher than that supported by the RK3399 SoC.

See commit 712fa1777207 ("arm64: dts: rockchip: add max-link-speed for
rk3399").

Fixes: 5a65505a6988 ("arm64: dts: rockchip: Add initial support for Pinebook Pro")
Signed-off-by: Simon South <simon@simonsouth.net>
Link: https://lore.kernel.org/r/20200930185627.5918-1-simon@simonsouth.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: rockchip: fix vopl iommu irq on px30

[ Upstream commit 656c648354e1561fa4f445b0b3252ec1d24e3951 ]

The vop-mmu shares the irq with its matched vop but not the vpu.

Fixes: 7053e06b1422 ("arm64: dts: rockchip: add core dtsi file for PX30 SoCs")
Signed-off-by: Sandy Huang <hjc@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Tested-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Link: https://lore.kernel.org/r/20210108110627.3231226-1-heiko@sntech.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: amlogic: meson-g12: Set FL-adj property value

[ Upstream commit 7386a559caa6414e74578172c2bc4e636d6bd0a0 ]

In accordance with the DWC USB3 bindings the property is supposed to have
uint32 type. It's erroneous from the DT schema and driver points of view
to declare it as boolean. As Neil suggested set it to 0x20 so not break
the platform and to make the dtbs checker happy.

Link: https://lore.kernel.org/linux-usb/20201010224121.12672-16-Sergey.Semin@baikalelectronics.ru/
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Fixes: 9baf7d6be730 ("arm64: dts: meson: g12a: Add G12A USB nodes")
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20201210091756.18057-3-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: i8042 - unbreak Pegatron C15B

[ Upstream commit a3a9060ecad030e2c7903b2b258383d2c716b56c ]

g++ reports

drivers/input/serio/i8042-x86ia64io.h:225:3: error: ‘.matches’ designator used multiple times in the same initializer list

C99 semantics is that last duplicated initialiser wins,
so DMI entry gets overwritten.

Fixes: a48491c65b51 ("Input: i8042 - add ByteSpeed touchpad to noloop table")
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Link: https://lore.kernel.org/r/20201228072335.GA27766@localhost.localdomain
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: c630: keep both touchpad devices enabled

[ Upstream commit a9164910c5ceed63551280a4a0b85d37ac2b19a5 ]

Indicated by AML code in ACPI table, the touchpad in-use could be found
on two possible slave addresses on &i2c3, i.e. hid@15 and hid@2c.  And
which one is in-use can be determined by reading another address on the
I2C bus.  Unfortunately, for DT boot, there is currently no support in
firmware to make this check and patch DT accordingly.  This results in
a non-functional touchpad on those C630 devices with hid@2c.

As i2c-hid driver will stop probing the device if there is nothing on
the slave address, we can actually keep both devices enabled in DT, and
i2c-hid driver will only probe the existing one.  The only problem is
that we cannot set up pinctrl in both device nodes, as two devices with
the same pinctrl will cause pin conflict that makes the second device
fail to probe.  Let's move the pinctrl state up to parent node to solve
this problem.  As the pinctrl state of parent node is already defined in
sdm845.dtsi, it ends up with overwriting pinctrl-0 with i2c3_hid_active
state added in there.

Fixes: 11d0e4f28156 ("arm64: dts: qcom: c630: Polish i2c-hid devices")
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210102045940.26874-1-shawn.guo@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: OMAP1: OSK: fix ohci-omap breakage

[ Upstream commit 6efac0173cd15460b48c91e1b0a000379f341f00 ]

Commit 45c5775460f3 ("usb: ohci-omap: Fix descriptor conversion") tried to
fix all issues related to ohci-omap descriptor conversion, but a wrong
patch was applied, and one needed change to the OSK board file is still
missing. Fix that.

Fixes: 45c5775460f3 ("usb: ohci-omap: Fix descriptor conversion")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
[aaro.koskinen@iki.fi: rebased and updated the changelog]
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: xhci-mtk: break loop when find the endpoint to drop

commit a50ea34d6dd00a12c9cd29cf7b0fa72816bffbcb upstream.

No need to check the following endpoints after finding the endpoint
wanted to drop.

Fixes: 54f6a8af3722 ("usb: xhci-mtk: skip dropping bandwidth of unchecked endpoints")
Cc: stable <stable@vger.kernel.org>
Reported-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1612255104-5363-1-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: xhci-mtk: skip dropping bandwidth of unchecked endpoints

commit 54f6a8af372213a254af6609758d99f7c0b6b5ad upstream.

For those unchecked endpoints, we don't allocate bandwidth for
them, so no need free the bandwidth, otherwise will decrease
the allocated bandwidth.
Meanwhile use xhci_dbg() instead of dev_dbg() to print logs and
rename bw_ep_list_new as bw_ep_chk_list.

Fixes: 1d69f9d901ef ("usb: xhci-mtk: fix unreleased bandwidth data")
Cc: stable <stable@vger.kernel.org>
Reviewed-and-tested-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1612159064-28413-1-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: xhci-mtk: fix unreleased bandwidth data

commit 1d69f9d901ef14d81c3b004e3282b8cc7b456280 upstream.

xhci-mtk needs XHCI_MTK_HOST quirk functions in add_endpoint() and
drop_endpoint() to handle its own sw bandwidth management.

It stores bandwidth data into an internal table every time
add_endpoint() is called, and drops those in drop_endpoint().
But when bandwidth allocation fails at one endpoint, all earlier
allocation from the same interface could still remain at the table.

This patch moves bandwidth management codes to check_bandwidth() and
reset_bandwidth() path. To do so, this patch also adds those functions
to xhci_driver_overrides and lets mtk-xhci to release all failed
endpoints in reset_bandwidth() path.

Fixes: 08e469de87a2 ("usb: xhci-mtk: supports bandwidth scheduling with multi-TT")
Signed-off-by: Ikjoon Jang <ikjn@chromium.org>
Link: https://lore.kernel.org/r/20210113180444.v6.1.Id0d31b5f3ddf5e734d2ab11161ac5821921b1e1e@changeid
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: fix clock issue during resume in OTG mode

commit 0e5a3c8284a30f4c43fd81d7285528ece74563b5 upstream.

Commit fe8abf332b8f ("usb: dwc3: support clocks and resets for DWC3
core") introduced clock support and a new function named
dwc3_core_init_for_resume() which enables the clock before calling
dwc3_core_init() during resume as clocks get disabled during suspend.

Unfortunately in this commit the DWC3_GCTL_PRTCAP_OTG case was forgotten
and therefore during resume, a platform could call dwc3_core_init()
without re-enabling the clocks first, preventing to resume properly.

So update the resume path to call dwc3_core_init_for_resume() as it
should.

Fixes: fe8abf332b8f ("usb: dwc3: support clocks and resets for DWC3 core")
Cc: stable@vger.kernel.org
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Link: https://lore.kernel.org/r/20210125161934.527820-1-gary.bisson@boundarydevices.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc2: Fix endpoint direction check in ep_from_windex

commit f670e9f9c8cac716c3506c6bac9e997b27ad441a upstream.

dwc2_hsotg_process_req_status uses ep_from_windex() to retrieve
the endpoint for the index provided in the wIndex request param.

In a test-case with a rndis gadget running and sending a malformed
packet to it like:
    dev.ctrl_transfer(
        0x82,      # bmRequestType
        0x00,       # bRequest
        0x0000,     # wValue
        0x0001,     # wIndex
        0x00       # wLength
    )
it is possible to cause a crash:

[  217.533022] dwc2 ff300000.usb: dwc2_hsotg_process_req_status: USB_REQ_GET_STATUS
[  217.559003] Unable to handle kernel read from unreadable memory at virtual address 0000000000000088
...
[  218.313189] Call trace:
[  218.330217]  ep_from_windex+0x3c/0x54
[  218.348565]  usb_gadget_giveback_request+0x10/0x20
[  218.368056]  dwc2_hsotg_complete_request+0x144/0x184

This happens because ep_from_windex wants to compare the endpoint
direction even if index_to_ep() didn't return an endpoint due to
the direction not matching.

The fix is easy insofar that the actual direction check is already
happening when calling index_to_ep() which will return NULL if there
is no endpoint for the targeted direction, so the offending check
can go away completely.

Fixes: c6f5c050e2a7 ("usb: dwc2: gadget: add bi-directional endpoint support")
Cc: stable@vger.kernel.org
Reported-by: Gerhard Klostermeier <gerhard.klostermeier@syss.de>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20210127103919.58215-1-heiko@sntech.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: renesas_usbhs: Clear pipe running flag in usbhs_pkt_pop()

commit 9917f0e3cdba7b9f1a23f70e3f70b1a106be54a8 upstream.

Should clear the pipe running flag in usbhs_pkt_pop(). Otherwise,
we cannot use this pipe after dequeue was called while the pipe was
running.

Fixes: 8355b2b3082d ("usb: renesas_usbhs: fix the behavior of some usbhs_pkt_handle")
Reported-by: Tho Vu <tho.vu.wh@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1612183640-8898-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: usblp: don't call usb_set_interface if there's a single alt

commit d8c6edfa3f4ee0d45d7ce5ef18d1245b78774b9d upstream.

Some devices, such as the Winbond Electronics Corp. Virtual Com Port
(Vendor=0416, ProdId=5011), lockup when usb_set_interface() or
usb_clear_halt() are called. This device has only a single
altsetting, so it should not be necessary to call usb_set_interface().

Acked-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Jeremy Figgins <kernel@jeremyfiggins.com>
Link: https://lore.kernel.org/r/YAy9kJhM/rG8EQXC@watson
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: aspeed: add missing of_node_put

commit a55a9a4c5c6253f6e4dea268af728664ac997790 upstream.

Breaking out of for_each_child_of_node requires a put on the
child value.

Generated by: scripts/coccinelle/iterators/for_each_child.cocci

Fixes: 82c2d81361ec ("coccinelle: iterators: Add for_each_child.cocci script")
CC: Sumera Priyadarsini <sylphrenadin@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2101211907060.14700@hadrien
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: gadget: legacy: fix an error code in eth_bind()

commit 3e1f4a2e1184ae6ad7f4caf682ced9554141a0f4 upstream.

This code should return -ENOMEM if the allocation fails but it currently
returns success.

Fixes: 9b95236eebdb ("usb: gadget: ether: allocate and init otg descriptor by otg capabilities")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YBKE9rqVuJEOUWpW@mwanda
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: xhci: mvebu: make USB 3.0 PHY optional for Armada 3720

commit 3241929b67d28c83945d3191c6816a3271fd6b85 upstream.

Older ATF does not provide SMC call for USB 3.0 phy power on functionality
and therefore initialization of xhci-hcd is failing when older version of
ATF is used. In this case phy_power_on() function returns -EOPNOTSUPP.

[    3.108467] mvebu-a3700-comphy d0018300.phy: unsupported SMC call, try updating your firmware
[    3.117250] phy phy-d0018300.phy.0: phy poweron failed --> -95
[    3.123465] xhci-hcd: probe of d0058000.usb failed with error -95

This patch introduces a new plat_setup callback for xhci platform drivers
which is called prior calling usb_add_hcd() function. This function at its
beginning skips PHY init if hcd->skip_phy_initialization is set.

Current init_quirk callback for xhci platform drivers is called from
xhci_plat_setup() function which is called after chip reset completes.
It happens in the middle of the usb_add_hcd() function and therefore this
callback cannot be used for setting if PHY init should be skipped or not.

For Armada 3720 this patch introduce a new xhci_mvebu_a3700_plat_setup()
function configured as a xhci platform plat_setup callback. This new
function calls phy_power_on() and in case it returns -EOPNOTSUPP then
XHCI_SKIP_PHY_INIT quirk is set to instruct xhci-plat to skip PHY
initialization.

This patch fixes above failure by ignoring 'not supported' error in
xhci-hcd driver. In this case it is expected that phy is already power on.

It fixes initialization of xhci-hcd on Espressobin boards where is older
Marvell's Arm Trusted Firmware without SMC call for USB 3.0 phy power.

This is regression introduced in commit bd3d25b07342 ("arm64: dts: marvell:
armada-37xx: link USB hosts with their PHYs") where USB 3.0 phy was defined
and therefore xhci-hcd on Espressobin with older ATF started failing.

Fixes: bd3d25b07342 ("arm64: dts: marvell: armada-37xx: link USB hosts with their PHYs")
Cc: <stable@vger.kernel.org> # 5.1+: ea17a0f153af: phy: marvell: comphy: Convert internal SMCC firmware return codes to errno
Cc: <stable@vger.kernel.org> # 5.1+: f768e718911e: usb: host: xhci-plat: add priv quirk for skip PHY initialization
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> # On R-Car
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> # xhci-plat
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20210201150803.7305-1-pali@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: Adding support for Cinterion MV31

commit e478d6029dca9d8462f426aee0d32896ef64f10f upstream.

Adding support for Cinterion device MV31 for enumeration with
PID 0x00B3 and 0x00B7.

usb-devices output for 0x00B3
T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  6 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  1
P:  Vendor=1e2d ProdID=00b3 Rev=04.14
S:  Manufacturer=Cinterion
S:  Product=Cinterion PID 0x00B3 USB Mobile Broadband
S:  SerialNumber=b3246eed
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=cdc_wdm
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

usb-devices output for 0x00B7
T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  5 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  1
P:  Vendor=1e2d ProdID=00b7 Rev=04.14
S:  Manufacturer=Cinterion
S:  Product=Cinterion PID 0x00B3 USB Mobile Broadband
S:  SerialNumber=b3246eed
C:  #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

Signed-off-by: Christoph Schemmel <christoph.schemmel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>