usb: renesas: gadget: fixup: complete STATUS stage after receiving

Current usbhs gadget driver didn't complete STATUS stage after receiving.
It wasn't problem for us before, because some USB class doesn't use
DATA OUT stage in control transfer.
But, it is required on some device.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
(cherry picked from commit 3fe15505296cb563362e2cf6d3aed73e123e0df0)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

pwm: add period and polarity to struct pwm_lookup

Add period and polarity members to struct pwm_lookup so that platforms
using the lookup table can be treated the same way as those using the
device tree.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
(cherry picked from commit 3796ce1d4d4b330a75005c5eda105603ce9d4071)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ASoC: ak4642: Fix typo zoro -> zero

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit da731845d5b47c517876cb70884789aafa00771b)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

spi: rspi: Extract rspi_common_transfer()

Extract the common parts of rspi_transfer_one(), rspi_rz_transfer_one(),
and qspi_transfer_out_in() into the new function rspi_common_transfer().

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 8b983e90ea1a3dd82070f96c062ad521a06b7cc0)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

spi: rspi: Add DMA support for RSPI on RZ/A1H

Enable DMA support for RSPI on r7s72100 (RZ/A1H).

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit e7fb921d9f62df05240ad1a74b5a0f623e503c9c)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

spi: rspi: Add DMA support for QSPI on R-Car Gen2

Enable DMA support for QSPI on R-Car Gen2, for Single, Dual, and Quad SPI
Transfers.

Performance figures for reading from a QSPI FLASH driven at 24.375 MHz
on r8a7791/koelsch:
  - Single:  1.1 Mbps PIO, 23 Mbps DMA
  - Dual  : 12.7 Mbps PIO, 48 Mbps DMA
  - Quad  : 13   Mbps PIO, 70 Mbps DMA

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 4f12b5e529e4ff274eb478ec1c2ef41358ed9577)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

spi: rspi: Absorb rspi_rz_transfer_out_in() into rspi_rz_transfer_one()

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 03e627c55752fa434d5b3eba5ee3e489c51672b6)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

spi: rspi: Merge rspi_*_dma() into rspi_dma_transfer()

rspi_send_dma() and rspi_send_receive_dma() are very similar. Consolidate
into a single function rspi_dma_transfer(), and add missing checks for
dmaengine_submit() failures.

Both sg_table pointer parameters can be NULL, as RSPI supports TX-only
mode, and unidirectional DMA transfers will also be needed later for
Dual/Quad DMA support.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit c52fb6d63425248bd4152451a2cc74b7df8fa989)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

spi: rspi: Pass sg_tables instead of spi_tranfer to rspi_*_dma()

The DMA routines only need access to the scatter-gather tables inside the
spi_transfer structures, hence just pass those.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit e4b52dc4625ee739195189d40c6ddc7d55ddf312)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

spi: rspi: Move RSPI-specific setup out of DMA routines

Refactor RSPI (on SH) DMA handling to make it reusable for other RSPI
implementations:
  - Call the DMA routines after configuring the TX Mode bit and after
    calling rspi_receive_init(), so these RSPI-specific operations can be
    removed from the DMA routines,
  - Absorb rspi_transfer_out_in() into rspi_transfer_one().

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 8393fa787bf63c05cb6f9cf0a58ba1ea213c3f01)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

spi: rspi: Use SPI core DMA mapping framework

Use the SPI core DMA mapping framework instead of our own.
If available, DMA is used for transfers larger than the FIFO size
(8 or 32 bytes).

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 2f777ec91aa0623e058c43dd4aaf0b3325d3c3e8)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

spi: rspi: SPI DMA core needs both RX and TX DMA to function

The SPI DMA core framework needs both RX and TX DMA to function.  As a
preparation for converting the driver to use this framework, fall back to
PIO if no DMA channel or only one DMA channel is available.

This affects only RSPI, which could do DMA transfers for TX-only before.
RSPI-RZ and QSPI (at least for Single SPI Transfers) will need both RX and
TX DMA anyway.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 5f338d0ce0b4c9e6c554b92cfb288789a41bfbc1)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

spi: rspi: Remove unneeded resource test in DMA setup

The resource is know to exist, as rspi_probe() already mapped it.
Remove the test, and just pass the resource.
Pass the device pointer instead of the platform device pointer, as the
latter is no longer needed.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit fcdc49ae53dc8cfc1a7758607bca68935f568ca2)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

spi: rspi: Extract rspi_request_dma_chan()

Setup of the receive and transmit DMA channels is very similar, so let's
consolidate.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 65bf220571f131a7c3a564a88793bd0f16fd7c96)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

spi: rspi: Don't consider DMA configuration failures fatal

Fall back to PIO if DMA configuration failed.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 27e105a6006b8ce1b55709c5e24f63959981475d)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

spi: rspi: Extract rspi_pio_transfer()

The various PIO loops are very similar. Consolidate into a single
function rspi_pio_transfer().

Both buffer pointers can be NULL, as RSPI supports TX-only mode, and
Dual/Quad SPI Transfers are unidirectional.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 6837b8e91d2a080293c30d5fe42d9692390091fa)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

spi: rspi: Use core SPI_MASTER_MUST_[RT]X handling

RSPI needs dummy transfers to generate the SPI clock on receive.
RSPI-RZ and QSPI always do both transmit and receive.

Use the SPI core SPI_MASTER_MUST_RX/SPI_MASTER_MUST_TX infrastructure
instead of checking for the presence of buffers and providing dummy data
ourselves (for PIO), or providing a dummy buffer (for DMA).

rspi_receive_dma() now provides full duplex DMA transfers on RSPI, and is
renamed to rspi_send_receive_dma().

As the SPI core will always provide a TX buffer, the logic to choose
between DMA send and DMA send/receive in rspi_transfer_one() now has to
check for the presence of an RX buffer. Likewise for the DMA availability
tests in rspi_is_dma().

The buffer tests in qspi_transfer_one() are now always true, so they're
removed.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit b42e03596db3d45980c976c8124fdc323f031dc4)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

spi: rspi: Remove unused 16-bit DMA support

The 16-bit DMA support doesn't fit well within the SPI core DMA framework,
as it needs to manage its own double-sized temporary buffers, for handling
the interleaved data.
Remove it, as there is no in-tree board code that sets
rspi_plat_data.dma_width_16bit.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 9c5de2c1754c2bb3c69c4d7bf0d0edc0a61d8232)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

spi: rspi: Do not call rspi_receive_init() for TX-only

Since commit 8449fd76deb9ac67a15a6fb8ead7bb4595d019d2 ("spi: rspi: Merge
rspi_send_pio() and rspi_receive_pio()"), rspi_receive_init() is called
for transmit-only transfers too, while this is not needed.
Only call rspi_receive_init() when receiving, to preserve behavior on
RSPI on SH.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 32c64261c6f50a4e71ec7546f7e2f48eba91c985)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

spi: rspi: Extract rspi_wait_for_{tx_empty,rx_full}()

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 5f684c34fc82be84ece158aa5c5c7c5072daa9a0)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

spi: rspi: Round up division to avoid slave overclocking

The calculation of the bit rate divider used a standard C division, which
rounds down the quotient. This may lead to a higher bitrate than requested.
Round up to avoid this.

E.g. on Koelsch, the SPI flash (configured for 30 MHz) was driven at 48.75
MHz. After this patch it's driven at a safe 24.375 MHz.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 3beb61dbfcf188399cbc36ce1eeb8b2ba724de38)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

drivers: sh: Enable PM runtime for new R-Car Gen2 SoCs

The PM runtime code should also be enabled for:
  - r8a7792 (R-Car V2H)
  - r8a7793 (R-Car M2-N)
  - r8a7794 (R-Car E2)

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 2f35fb3c8a6018a0a5fe4a7fb0948b853c157256)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

drivers: sh: pm_runtime implementation needs to suspend and resume devices

If we override the platform bus calls for pm_runtime then we end up
with the calls to the devices' suspend and resume methods ignored
in favour of the bus ones.

Change to calling the pm_runtime calls to suspend and resume the
devices specifically in the drivers/sh/pm_runtime.c implementation
to allow any device that may want to run power management to do so.

Note, all the current sh driver implementations do not use their
own power management code so this is not a major implementation
issues.

This also brings the implementation into line with the versions
used by the Davinci and Keystone PM domain code, so once fully
tested these implementations could be merged together.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 8255fe169232364e5a01bd062e8037b8c1a9adec)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

drivers: sh: Restrict INTC_USERIMASK to SH4A

register_intc_userimask() is called from sh4a code only.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [r8a7779 legacy]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 39c5abbc54179998bf04368a11c561e19220d7d4)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

drivers: sh: pm_runtime does not need idle callback

In the runtime_pm idle callback the code assumes that a NULL .runtime_idle
entry is the same as a .runtime_idle entry that returns 0 as a result. This
means the entry in drivers/sh/pm_runtime can be removed in favour of just
leaving the entry NULL.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [r8a7779 legacy]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit fe95c932a31e7f12bcb6a4e07434462da2ac6e1d)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

sh: intc: Remove pointless irq_reserve_irqs() invocation

The preceding call to irq_create_identity_mapping() marks the
interrupt as allocated already. Remove the leftover.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Grant Likely <grant.likely@linaro.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Simon Horman <horms@verge.net.au>
Cc: linux-sh@vger.kernel.org
Link: http://lkml.kernel.org/r/20140507154339.189047829@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
(cherry picked from commit 3670802223e164f1089287d1c223d34d3c5dc3da)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

sh: clk: Use cpufreq_for_each_valid_entry macro for iteration

The cpufreq core now supports the cpufreq_for_each_valid_entry macro
helper for iteration over the cpufreq_frequency_table, so use it.

It should have no functional changes.

Signed-off-by: Stratos Karafotis <stratosk@semaphore.gr>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit 4229e1c61a4a7ac21d5d0790f6add1c9b98d33e7)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

cpufreq: Fix build error on some platforms that use cpufreq_for_each_*

On platforms that use cpufreq_for_each_* macros, build fails if
CONFIG_CPU_FREQ=n, e.g. ARM/shmobile/koelsch/non-multiplatform:

drivers/built-in.o: In function `clk_round_parent':
clkdev.c:(.text+0xcf168): undefined reference to `cpufreq_next_valid'
drivers/built-in.o: In function `clk_rate_table_find':
clkdev.c:(.text+0xcf820): undefined reference to `cpufreq_next_valid'
make[3]: *** [vmlinux] Error 1

Fix this making cpufreq_next_valid function inline and move it to
cpufreq.h.

Fixes: 27e289dce297 (cpufreq: Introduce macros for cpufreq_frequency_table iteration)
Reported-and-tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Stratos Karafotis <stratosk@semaphore.gr>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit 5eeaf1f1897372590105f155c6a7110b3fa36aef)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Conflicts:
include/linux/cpufreq.h

cpufreq: Introduce macros for cpufreq_frequency_table iteration

Many cpufreq drivers need to iterate over the cpufreq_frequency_table
for various tasks.

This patch introduces two macros which can be used for iteration over
cpufreq_frequency_table keeping a common coding style across drivers:

- cpufreq_for_each_entry: iterate over each entry of the table
- cpufreq_for_each_valid_entry: iterate over each entry that contains
a valid frequency.

It should have no functional changes.

Signed-off-by: Stratos Karafotis <stratosk@semaphore.gr>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit 27e289dce29764e488c1e13e9aa6950cad1f4aab)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

mmc: sh_mmcif: clarify DDR timing mode between SD-UHS and eMMC

Replaced UHS_DDR50 with MMC_DDR52.

CC: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
(cherry picked from commit 4039ff4741c6e8d27b5ca42dc92d87dc2d625b80)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

mmc: clarify DDR timing mode between SD-UHS and eMMC

This change distinguishes DDR timing mode of current
mixed usage to clarify device type.

Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
(cherry picked from commit 79f7ae7c45a6ccf04e2908337461dee615f6afb0)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

serial: sh-sci: Add device tree support for r8a7779

Simply document a new compat string.
There appears to be no need for a driver updates.

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 81bd1eb7af751666ace2f1dadb0b0101401807cd)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Revert "serial: sh-sci: Add device tree support for r8a7779"

This reverts commit fcbee4d49f30eb0eaa83a62e6a3cab5a892ed93f.

It wasn't quite ready to go in yet, sorry about that.

Cc: Simon Horman <horms@verge.net.au>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 2aafb3864b9fa5ce83250537d940f973ef37b8dc)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

serial: sh-sci: Add device tree support for r8a7779

According to the platform data for the legacy-C initialisation of sh-sci
for the r8a7779 SoC and my own testing the SCIx_SH4_SCIF_REGTYPE bit of
scscr needs to be set.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit fcbee4d49f30eb0eaa83a62e6a3cab5a892ed93f)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

pinctrl: sh-pfc: r8a73a4: Allow Multiplatform Build

Add #ifdefs to allow r8a73a4 Multiplatform build. Needed
to enable r8a73a4 Multiplatform support.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
(cherry picked from commit f39d8a72feb073c4ef6296f1d12cedf2ed572bfb)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

pinctrl: sh-pfc: sh73a0: Allow Multiplatform Build

Add #ifdefs to allow sh73a0 Multiplatform build. Needed
to enable sh73a0 Multiplatform support.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
(cherry picked from commit 672d32377494b84d6af483ce46eda07baba4e3ea)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

pinctrl: sh-pfc: r8a7740: Allow Multiplatform Build

Add #ifdefs to allow r8a7740 Multiplatform build. Needed
to enable r8a7740 Multiplatform support.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
(cherry picked from commit b6c996a295620b67e4033f2eb07e5a5cf9e7a48f)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

pinctrl: sh-pfc: Don't set the pinmux_irq irq field for multiplatform

In the multiplatform kernel case the IRQs associated with the PFC GPIOs
are specified through DT. The pinmux_irq irq field is thus ignored by
the code, and doesn't need to be set.

This will allow removing the mach/irq.h include from pfc-*.c files that
was required for the irq_pin() macro used to initialize the irq field.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
(cherry picked from commit 0e26e8dfb9dddb0559fb7cd7b53a8b497a8d4121)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

pinctrl: pfc: r8a7790: add mux data for IIC(B) cores

Signed-off-by: Wolfram Sang <wsa@sang-engineering.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
(cherry picked from commit a16b81dcbfc5889c37dac5f8e836136e4740fc18)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

pinctrl: pfc: r8a7790: add i2c0 muxing

Add the muxing for the last missing i2c rcar core. Fix the sorting for
SH_PFC_PIN_NAMED while we are here.

Signed-off-by: Wolfram Sang <wsa@sang-engineering.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
(cherry picked from commit 35a493de0daf4955b6d15d488b3f8754d4637a04)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

sh-pfc: r8a7791: Add Audio pin support

Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
(cherry picked from commit c57a05b0eb0ee0205b34f2694b035afc75fa71e4)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

sh-pfc: r8a7791: Add SSI pin support

Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
(cherry picked from commit b664cd1f020211d8e4480c2937b82fe513a9c757)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

pinctrl: sh-pfc: r8a7791: Split the DU sync and cde/disp groups

The DU parallel interface ODDF signal is optional, move it out of the
HSYNC/VSYNC group into a group of its down. The CDE and DISP signals are
independent, split them to two different groups.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
(cherry picked from commit d10046e25c73e6150677b1b5360f20bb631181a7)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

clocksource: sh_mtu2: Remove unnecessary OOM messages

The site-specific OOM messages are unnecessary, because they
duplicate the MM subsystem generic OOM message.

[dlezcano] : refreshed against latest modifications: kmalloc -> kzalloc

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
(cherry picked from commit c77a565b2966567b97d589e90a6b9ce725bb15b1)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

clocksource: sh_mtu2: Sort headers alphabetically

This helps locating duplicates and inserting new headers.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
(cherry picked from commit 346f5e76b3822a2530a03f33b00ee89dfc463326)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

clocksource: sh_mtu2: Remove FSF mail address from GPL notice

Do not include the paragraph about writing to the Free Software
Foundation's mailing address from the sample GPL notice. The FSF has
changed addresses in the past, and may do so again. Linux already
includes a copy of the GPL.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
(cherry picked from commit 24c8f71707087eb177b45f4a24faedaa0d8f0287)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

clocksource: sh_mtu2: Rename clock to "fck" in the non-legacy case

The sh_mtu2 driver gets the MTU2 functional clock using a connection ID
of "mtu2_fck". While all SH SoCs create clock lookup entries with a NULL
device ID and a "mtu2_fck" connection ID, the ARM SoCs use the device ID
only with a NULL connection ID. This works on legacy platforms but will
break on ARM with DT boot.

Fix the situation by using a connection ID of "fck" in the non-legacy
platform data case. Clock lookup entries will be renamed to use the
device ID as well as the connection ID as platforms get moved to new
platform data. The legacy code will eventually be dropped, leaving us
with device ID based clock lookup, compatible with DT boot.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
(cherry picked from commit 6dc9693bb3997cb324a2ffb39deaa72081a9bd0d)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

clocksource: sh_mtu2: Add support for multiple channels per device

MTU2 hardware devices can support multiple channels, with global
registers and per-channel registers. The sh_mtu2 driver currently models
the hardware with one Linux device per channel. This model makes it
difficult to handle global registers in a clean way.

Add support for a new model that uses one Linux device per timer with
multiple channels per device. This requires changes to platform data,
add new channel configuration fields.

Support for the legacy model is kept and will be removed after all
platforms switch to the new model.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
(cherry picked from commit faf3f4f8c805f5f8a786ba544c94bf3e01838388)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

clocksource: sh_mtu2: Hardcode MTU2 clock event rating to 200

All boards use clock event ratings of 200 for the MTU2, hardcode it in
the driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
(cherry picked from commit 207e21a9732a27f58843ccae1c9644f3a1636b66)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

clocksource: sh_mtu2: Set cpumask to cpu_possible_mask

The MTU2 is not tied to CPU0, make it usable on any CPU.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
(cherry picked from commit 3cc950479891040366629247357512f1cc928da3)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

clocksource: sh_mtu2: Replace hardcoded register values with macros

Define symbolic macros for all used registers bits.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
(cherry picked from commit f992c2410bd31b7c80ba8cc8b989d91b9cac3c30)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

clocksource: sh_mtu2: Allocate channels dynamically

This prepares the driver for multi-channel support.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
(cherry picked from commit c54ccb431ce6ce813bb850e8659991fc4c5bc6bc)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

clocksource: sh_mtu2: Replace kmalloc + memset with kzalloc

One kzalloc a day keeps the bugs away.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
(cherry picked from commit 810c651369b343618d949826e0acd0df1b8b06eb)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

clocksource: sh_mtu2: Add index to struct sh_mtu2_channel

Use the index as the timer start/stop bit and when printing messages to
identify the channel.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
(cherry picked from commit d2b93177065fd8e1e18f4f42880326e0881ff457)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

clocksource: sh_mtu2: Add memory base to sh_mtu2_channel structure

The channel memory base is channel-specific, add it to the channel
structure in preparation for support of multiple channels per device.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
(cherry picked from commit da90a1c67751a412499a9f5698c3bf0bf80f65a6)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

clocksource: sh_mtu2: Constify name argument to sh_mtu2_register()

The name argument is assigned to const structure fields only, constify
it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
(cherry picked from commit aa83804af705731d2802b80fb4b94a79045d31a3)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

clocksource: sh_mtu2: Split channel setup to separate function

Move the channel setup code from sh_mtu2_setup to a new
sh_mtu2_setup_channel function and call it from sh_mtu2_setup.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
(cherry picked from commit 2e1a53265d550002fdd1658778854d56ae4cadc1)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

clocksource: sh_mtu2: Rename struct sh_mtu2_priv to sh_mtu2_device

Channel data is private as well, rename priv to device to make the
distrinction between the core device and the channels clearer.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
(cherry picked from commit 7dad72de1b475d02935e5c79c218637b6c63108b)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

clocksource: sh_mtu2: Split channel fields from sh_mtu2_priv

Create a new sh_mtu2_channel structure to hold the channel-specific
fields in preparation for multiple channels per device support.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
(cherry picked from commit 42752cc619c0ee619b56f86932ce42b00adb5052)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

clocksource: sh_mtu2: Turn sh_mtu2_priv fields into local variables

The rate and periodic fields are used in a single function only, as
local variables. Remove them from the structure.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
(cherry picked from commit f92d62f53973466cccb25900c2597ff6df950d74)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

clocksource: sh_mtu2: Use request_irq() instead of setup_irq()

The driver claims it needs to register an interrupt handler too early
for request_irq(). This might have been true in the past, but the only
meaningful difference between request_irq() and setup_irq() today is an
additional kzalloc() call in request_irq(). As the driver calls
kmalloc() itself we know that the slab allocator is available, we can
thus switch to request_irq().

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
(cherry picked from commit 276bee05d8b72e98d530b55161e0a2131da99f58)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

clocksource: sh_cmt: Remove unnecessary OOM messages

The site-specific OOM messages are unnecessary, because they
duplicate the MM subsystem generic OOM message.

[dlezcano] : refreshed against latest modifications: kmalloc -> kzalloc

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
(cherry picked from commit 0178f41d3d35b63ed25a066d90e7dda380018c06)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

clocksource: sh_cmt: Request IRQ for clock event device only

Clock sources don't need an IRQ, request the IRQ only for channels used
as clock event devices.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
(cherry picked from commit bfa76bb12f23ecf0c6d07c302f4571a6fe9bc3e3)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

clocksource: sh_cmt: Sort headers alphabetically

This helps locating duplicates and inserting new headers.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
(cherry picked from commit e7a9bcc2372b0e62443569c63a369cfd528db4f4)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

clocksource: sh_cmt: Remove FSF mail address from GPL notice

Do not include the paragraph about writing to the Free Software
Foundation's mailing address from the sample GPL notice. The FSF has
changed addresses in the past, and may do so again. Linux already
includes a copy of the GPL.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
(cherry picked from commit 1cd89c568c057a13ca11acf0eb3a78121513e2b6)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

clocksource: sh_cmt: Rename clock to "fck" in the non-legacy case

The sh_cmt driver gets the CMT functional clock using a connection ID of
"cmt_fck". While all SH SoCs create clock lookup entries with a NULL
device ID and a "cmt_fck" connection ID, the ARM SoCs use the device ID
only with a NULL connection ID. This works on legacy platforms but will
break on ARM with DT boot.

Fix the situation by using a connection ID of "fck" in the non-legacy
platform data case. Clock lookup entries will be renamed to use the
device ID as well as the connection ID as platforms get moved to new
platform data. The legacy code will eventually be dropped, leaving us
with device ID based clock lookup, compatible with DT boot.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
(cherry picked from commit 24b4e07df54b7bf7739fb3dd193f639a8f274ad6)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

clocksource: sh_cmt: Add support for multiple channels per device

CMT hardware devices can support multiple channels, with global
registers and per-channel registers. The sh_cmt driver currently models
the hardware with one Linux device per channel. This model makes it
difficult to handle global registers in a clean way.

Add support for a new model that uses one Linux device per timer with
multiple channels per device. This requires changes to platform data,
add new channel configuration fields.

Support for the legacy model is kept and will be removed after all
platforms switch to the new model.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
(cherry picked from commit 81b3b2711072b6047d5f332cd8751a1c5c9a3fb2)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

clocksource: sh_cmt: Hardcode CMT clock source rating to 125

All boards use or should use a clock source rating of 125 for the CMT,
hardcode it in the driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
(cherry picked from commit fb28a659813084365eced5c2876c6383da52e634)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

clocksource: sh_cmt: Hardcode CMT clock event rating to 125

All boards use or should use a clock event rating of 125 for the CMT,
hardcode it in the driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
(cherry picked from commit b7fcbb0f830e6cccc9d358c24f8463e5d8018649)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

clocksource: sh_cmt: Set cpumask to cpu_possible_mask

The CMT is a global timer not restricted to a single CPU. It has a lower
rating than the TMU or ARM architected timer, but is still useful on
systems where the other timers are stopped during CPU sleep.

When multiple timers are available the timers core selects which timer
to use based on timer ratings.

On SMP systems where timer broadcasting is required, one dummy timer is
instantiated per CPU with a rating of 100. On those systems the CMT
timer has a rating of 80, which makes the dummy timer selected by
default on all CPUs. The CMT is then available, and will be used as a
broadcast timer.

On UP systems no dummy timer is instantiated. The CMT timer has a rating
of 125 on those systems and is used directly as a clock event device for
CPU0 without broadcasting.

The CMT rating shouldn't depend on whether we boot a UP or SMP system.
We can't raise the CMT rating to 125 on SMP systems. This would select
CMT as the clock event device for CPU0 as its rating is higher than the
dummy timer rating, and would leave the system without a broadcast
timer. We could instead lower the rating to 80 on all systems, but that
wouldn't reflect reality as ratings between 1 and 99 are documented as
"unfit for real use".

We should raise the rating above 99 and still have the CMT selected as a
broadcast timer. This can be done by changing the cpumask from
cpumask_of(0) to cpu_possible_mask. In that case the timer selection
logic will prefer the previously probed and already selected dummy timer
for all CPUs based on the fact that already selected per-cpu timers are
preferred over new global timers, regardless of their respective
ratings. This also better reflects reality, as the CMT is not tied to
the boot CPU.

Ideally the timer selection logic should realize that the CMT needs to
be used as a broadcast timer on SMP systems as no other broadcast timer
is available, regardless of the cpumask and rating.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
(cherry picked from commit f1ebe1e47e1979393a8492bfe751176908a830ae)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

clocksource: sh_cmt: Replace hardcoded register values with macros

Define symbolic macros for all used registers bits.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
(cherry picked from commit d14be99b7e3fe52bc9921caa30953d49f499f121)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

clocksource: sh_cmt: Split static information from sh_cmt_device

Create a new sh_cmt_info structure to hold static information about the
device model and reference that structure from the sh_cmt_device
structure.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
(cherry picked from commit 2cda3ac49d5744432e9ebffb8ba47bef6eca053d)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

clocksource: sh_cmt: Allocate channels dynamically

This prepares the driver for multi-channel support.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
(cherry picked from commit f5ec9b194a93c05e2ccdb3e90d9061cfedc806d9)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

clocksource: sh_cmt: Replace kmalloc + memset with kzalloc

One kzalloc a day keeps the bugs away.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
(cherry picked from commit b262bc74dcfd77355720342cbcf89cc8ec12e86b)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

clocksource: sh_cmt: Add index to struct sh_cmt_channel

Use the index when printing messages to identify the channel.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
(cherry picked from commit 740a95184dd61eb0481f75ced05ea5e01b7ce6ac)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

clocksource: sh_cmt: Add memory base to sh_cmt_channel structure

The channel memory base is channel-specific, add it to the channel
structure in preparation for support of multiple channels per device.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
(cherry picked from commit c924d2d2a964715b55b6601be338b3bd05a1ced5)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

clocksource: sh_cmt: Rename mapbase/mapbase_str to mapbase_ch/mapbase

The mapbase variable points to the mapped base address of the channel,
rename it to mapbase_sh. mapbase_str points to the mapped base address
of the CMT device, rename it to mapbase.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
(cherry picked from commit 36f1ac982d94cd3cce8ae24abd0676b79dec6126)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

clocksource: sh_cmt: Constify name argument to sh_cmt_register()

The name argument is assigned to const structure fields only, constify
it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
(cherry picked from commit 1d053e1d8eb28f42b7ec57d1c11ce70b8fba45ff)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

clocksource: sh_cmt: Split channel setup to separate function

Move the channel setup code from sh_cmt_setup to a new
sh_cmt_setup_channel function and call it from sh_cmt_setup.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
(cherry picked from commit b882e7b13bc12b3d6b00e4ea2fe374413ddcdd2d)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

clocksource: sh_cmt: Rename struct sh_cmt_priv to sh_cmt_device

Channel data is private as well, rename priv to device to make the
distrinction between the core device and the channels clearer.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
(cherry picked from commit 2653caf4381f9adeec8c18dfec21ec3c855d801c)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

clocksource: sh_cmt: Split channel fields from sh_cmt_priv

Create a new sh_cmt_channel structure to hold the channel-specific
field in preparation for multiple channels per device support.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
(cherry picked from commit 7269f9333292586f2378c5321b40a8d3779c4653)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

clocksource: sh_cmt: Use request_irq() instead of setup_irq()

The driver claims it needs to register an interrupt handler too early
for request_irq(). This might have been true in the past, but the only
meaningful difference between request_irq() and setup_irq() today is an
additional kzalloc() call in request_irq(). As the driver calls
kmalloc() itself we know that the slab allocator is available, we can
thus switch to request_irq().

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
(cherry picked from commit dc2eadece70089430f12e4ed6bb1a4421cf3d6f4)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

This patch fixes host drivers to use CONFIG_PM_SLEEP instead of CONFIG_PM
where applicable.  Benefits of this change:

* unused code is not being compiled in for CONFIG_PM=y, CONFIG_PM_SLEEP=n
  and CONFIG_PM_RUNTIME=y configurations

* easier transition to use struct dev_pm_ops and SIMPLE_DEV_PM_OPS() in
  the future

* more consistent code (there are host drivers which are using the correct
  CONFIG_PM_SLEEP checks already)

The patch leaves the core libata code and ->port_[suspend,resume] support
in sata_[inic162x,nv,sil24].c alone for now.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
(cherry picked from commit 58eb8cd565af4a104395e3c10443951c1f73dafe)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

thermal: rcar: remove unnecessary OOM messages

The site-specific OOM messages are unnecessary, because they
duplicate the MM subsystem generic OOM message.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
(cherry picked from commit b0a60d88d60b92c769ec589796403937f6e5243e)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

thermal: rcar: Use pm_runtime_put() i.s.o. pm_runtime_put_sync()

There's no need for this to be synchronous

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
(cherry picked from commit 09be511cdab813c2971c9f9af0cb40f6583cf80d)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

pinctrl: Enable "power-source" to be extracted from DT files

Add "power-source" property to generic options used for DT parsing files.
This  enables drivers, which use generic pin configurations, to get the
value passed to this property.

Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
(cherry picked from commit ca6c55189a631f3380ff0a28f90d920a84e60d7b)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

pinctrl: pinconf-generic: Use kmemdup instead of kmalloc + memcpy

This issue was reported by coccicheck using the semantic patch
at scripts/coccinelle/api/memdup.cocci

Signed-off-by: Benoit Taine <benoit.taine@lip6.fr>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
(cherry picked from commit db388dfb90368638ad238c27b045b6c9bf1f6c17)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

pinctrl: allows not to define the get_group_pins operation

When using a group only pinctrl driver, which does not have any
information on the pins it is useless to define a get_group_pins
always returning an empty list of pins.

When not using get_group_pin[1], a driver must implement it so
pins = NULL and num_pins = 0. This patch makes it the default
behaviour if not defined in the pinctrl driver when used in
pinmux enable and disable funtions and in pinctrl_groups_show.

It also adds a check in pinctrl_get_group_pins and return -EINVAL if
not defined. This function is called in the gpiolib when adding when
pingroup range. It cannot be used if no group is defined, so this seams
reasonable.

[1] get_group_pin(struct pinctrl_dev *pctldev,
  unsigned selector,
  const unsigned **pins,
  unsigned *num_pins);

Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
(cherry picked from commit e5b3b2d9ed202697a937c282f9c4d93b1e3e0848)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

i2c: sh_mobile: add compatibles for additional SoC

Signed-off-by: Wolfram Sang <wsa@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
(cherry picked from commit 90104d06372e41b2a844950f6648322b09f9b8b9)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

i2c: sh_mobile: fix clock calculation for newer SoCs

Newer SoCs have so fast input clocks that the ICCL/H registers only
count every second clock to have a meaningful 9-bit range. The driver
was already prepared for that happening, but didn't use it so far.
Add the proper DT configuration for SoCs that need it.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
(cherry picked from commit 67240dfcb8dcf756cc00fb37f5cb7e3ee2fa6190)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

i2c: sh_mobile: check timing parameters for valid range

Due to misconfiguration, it can happen that the calculated timing
parameters are out of range. Bail out if that happens. We can also
simplify some logic later because of the verified value. Also, make the
printouts of the values more precise by adding the hex-prefixes.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
(cherry picked from commit 7663ebefca8079ef0fd2fff1047d3d10af654c78)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

i2c: sh_mobile: bail out on errors when initializing

sh_mobile_i2c_init() could detect wrong settings, but didn't bail out,
so it would continue unconfigured. Fix this.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
(cherry picked from commit 6ed7053c2255c34886297b995c6a18607b36d668)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

i2c: sh_mobile: remove superfluous offset parameter

Following the KISS principle, remove unneeded stuff.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
(cherry picked from commit ed4121e129ae46615ab570318b5b8f31494ced98)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

i2c: sh_mobile: devm conversion, irq setup

This is what devm was made for. No rollback mechanism needed, remove the
hook parameter from the irq setup function and simplify it. While we are
here change some variables to proper types.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
(cherry picked from commit 7fe8a9993337e4d1957737b4468fc574af8fb957)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

i2c: sh_mobile: devm conversion, low hanging fruits

Convert the easy parts to devm. irqs will be converted in a seperate
patch to keep diffs readable.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
(cherry picked from commit 4fd31c2eb7bf19927524bca1c5c17e6bb0f4f6eb)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

i2c: sh_mobile: honor DT bus speed settings

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
(cherry picked from commit 88c289ec28dfb0f383dcdbadd2c759f910585815)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

i2c: sh_mobile: improve error handling

Use standard i2c error codes for i2c failures. Also, don't print
something on timeout since it happens regularly with i2c. Simplify some,
logic, too.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
(cherry picked from commit 5a72b25e7896e6358b62b590ce5b3a457516ae40)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

i2c: sh_mobile: replace magic hex values with constants

No functional change, binaries are identical.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
(cherry picked from commit a78f6a4140f95cbedc0b28c4c883e8aa9ba044f1)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

i2c: remove unnecessary OOM messages

The site-specific OOM messages are unnecessary, because they
duplicate the MM subsystem generic OOM message. For example,
k.alloc and v.alloc failures use dump_stack().

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Felipe Balbi <balbi@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
(cherry picked from commit 46797a2adbf0cdc3be17707dc64e872eeed86a8a)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Conflicts:
drivers/i2c/busses/i2c-efm32.c

i2c: rcar: update copyright and license information

Make clear that the driver is GPL v2 only. Remove FSF address. Remove
filename in comment. Update copyright information.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
(cherry picked from commit 3d99beabf17506b9d48461d1677a61a430000ad7)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>