platform/upstream/glib.git
13 years agoBug 654195 - Add g_unichar_compose() and g_unichar_decompose()
Matthias Clasen [Thu, 14 Jul 2011 02:07:11 +0000 (22:07 -0400)]
Bug 654195 - Add g_unichar_compose() and g_unichar_decompose()

13 years agoUpdated Belarusian translation.
Ihar Hrachyshka [Wed, 13 Jul 2011 20:36:37 +0000 (23:36 +0300)]
Updated Belarusian translation.

13 years agoUpdated Belarusian translation.
Ihar Hrachyshka [Wed, 13 Jul 2011 20:30:49 +0000 (23:30 +0300)]
Updated Belarusian translation.

13 years agoUpdated Lithuanian translation
Aurimas Černius [Tue, 12 Jul 2011 20:21:25 +0000 (23:21 +0300)]
Updated Lithuanian translation

13 years agoUpdated Korean translation
Changwoo Ryu [Tue, 12 Jul 2011 17:51:03 +0000 (02:51 +0900)]
Updated Korean translation

13 years agoGDBusInterfaceSkeleton: fix odd use of floating refs
Ryan Lortie [Tue, 12 Jul 2011 00:56:57 +0000 (02:56 +0200)]
GDBusInterfaceSkeleton: fix odd use of floating refs

The get_properties() function was documented as returning a floating

Switch it over to returning a normal reference and patch a couple of
uses.

https://bugzilla.gnome.org/show_bug.cgi?id=654394

13 years agoGVariant: add g_variant_take_ref()
Ryan Lortie [Mon, 11 Jul 2011 12:27:53 +0000 (14:27 +0200)]
GVariant: add g_variant_take_ref()

This function implements the following logic:

  if (g_variant_is_floating (value))
    g_variant_ref_sink (value);

which is used for consuming the return value of callbacks that may or
may not return floating references.

This patch also replaces a few instances of the above code with the new
function (GSettings, GDBus) and lifts a long-standing restriction on the
use of floating values as the return value for signal handlers by
improving g_value_take_variant().

https://bugzilla.gnome.org/show_bug.cgi?id=627974

13 years agoUpdated Latvian translation.
Rudolfs Mazurs [Tue, 12 Jul 2011 13:29:33 +0000 (16:29 +0300)]
Updated Latvian translation.

13 years agoDocs: Fixed a typo.
Murray Cumming [Tue, 12 Jul 2011 10:09:31 +0000 (12:09 +0200)]
Docs: Fixed a typo.

13 years agotests: fix glib_translations_work()
Tim-Philipp Müller [Tue, 5 Jul 2011 13:30:31 +0000 (14:30 +0100)]
tests: fix glib_translations_work()

If setlocale() to our test locale fails, translations
won't work either.

https://bugzilla.gnome.org/show_bug.cgi?id=654017

13 years agoadd g_regex_escape_nul
Paolo Bonzini [Thu, 15 Apr 2010 06:23:00 +0000 (08:23 +0200)]
add g_regex_escape_nul

The function can be used to let regex compile non-NUL-terminated
strings without redesigning the way the pattern is stored in GRegex
objects and retrieved with g_regex_get_pattern.

https://bugzilla.gnome.org/show_bug.cgi?id=615895

13 years agoFix gtk-doc cross-linking among glib/gobject/gio
Matthias Clasen [Mon, 11 Jul 2011 03:55:52 +0000 (23:55 -0400)]
Fix gtk-doc cross-linking among glib/gobject/gio

Patch by Daniel Macks, bug 644687.

13 years agoTake out the timeout from the large-message test
Matthias Clasen [Mon, 11 Jul 2011 03:11:30 +0000 (23:11 -0400)]
Take out the timeout from the large-message test

This is an attempt to make the test not fail on build slaves,
which currently getting a timeout error here.

13 years agoDon't test negative values in ulong conversions
Matthias Clasen [Mon, 11 Jul 2011 01:57:45 +0000 (21:57 -0400)]
Don't test negative values in ulong conversions

This is failing on 32bit build slaves.

13 years agoDon't needlessly use "echo -e"
Martin Storsjo [Wed, 6 Jul 2011 13:41:44 +0000 (16:41 +0300)]
Don't needlessly use "echo -e"

The -e parameter to echo isn't recognized by echo in POSIX sh,
but isn't needed when no escaped characters need to be
interpreted.

This fixes building glib with a mingw cross compiler on Mac OS X.

https://bugzilla.gnome.org/show_bug.cgi?id=654085

13 years agoOptimize g_[s]list_free_full a bit
Matthias Clasen [Mon, 11 Jul 2011 00:42:58 +0000 (20:42 -0400)]
Optimize g_[s]list_free_full a bit

No need to iterate the list twice.
Proposed by Luiz Augusto von Dentz,
http://bugzilla.gnome.org/show_bug.cgi?id=653935

13 years agoGCancellable: Make eventfd() fall back to pipes on EINVAL too
Colin Walters [Sun, 10 Jul 2011 16:19:15 +0000 (12:19 -0400)]
GCancellable: Make eventfd() fall back to pipes on EINVAL too

https://bugzilla.gnome.org/show_bug.cgi?id=654232

13 years agodocs: G_GNUC_DEPRECATED_FOR was added in Glib 2.26
Javier Jardón [Fri, 8 Jul 2011 15:15:52 +0000 (16:15 +0100)]
docs: G_GNUC_DEPRECATED_FOR was added in Glib 2.26

13 years ago[l10n]Updated Turkish translation
Muhammet Kara [Thu, 7 Jul 2011 22:09:03 +0000 (01:09 +0300)]
[l10n]Updated Turkish translation

13 years agoAdded UG translation
Abduxukur Abdurixit [Thu, 7 Jul 2011 14:31:17 +0000 (16:31 +0200)]
Added UG translation

13 years agoMove documentation to inline comments: spawn
Javier Jardón [Wed, 6 Jul 2011 21:13:05 +0000 (22:13 +0100)]
Move documentation to inline comments: spawn

13 years agoMove documentation to inline comments: conversions
Javier Jardón [Wed, 6 Jul 2011 20:49:55 +0000 (21:49 +0100)]
Move documentation to inline comments: conversions

13 years agog_output_stream_splice: deal with overflow
Dan Winship [Tue, 7 Jun 2011 21:15:17 +0000 (17:15 -0400)]
g_output_stream_splice: deal with overflow

On 32-bit machines in particular, bytes_written may overflow a gssize.
Notice when that happens and just return G_MAXSSIZE instead.

https://bugzilla.gnome.org/show_bug.cgi?id=649246

13 years agoRevert distribution of build/win32/setup.py
Chun-wei Fan [Wed, 6 Jul 2011 01:58:37 +0000 (09:58 +0800)]
Revert distribution of build/win32/setup.py

Revert commit on distribution of this file as it is meant to be used in
a GIT checkout only.

13 years agoAdd build/win32/setup.py to distribution
Chun-wei Fan [Wed, 6 Jul 2011 00:28:57 +0000 (08:28 +0800)]
Add build/win32/setup.py to distribution

13 years agoBug 653841: Update README.win32 and VS README.txt's
Chun-wei Fan [Wed, 6 Jul 2011 00:25:41 +0000 (08:25 +0800)]
Bug 653841: Update README.win32 and VS README.txt's

This relates to my previous commit titled "add a script to generator
files for building" on behalf of Shixin Zeng.

Tell people about the availability of a python script to create the
necessary files for a Visual C++ build from a GIT checkout.

This is done with the courtesy of Shixin Zeng's python script which does
the job and eliminates the troubles of getting a suitable shell environment
to do the "make dist" job (which is especially not easy on Windows itself!)

13 years agoadd a script to generator files for building
Shixin Zeng [Wed, 29 Jun 2011 05:04:14 +0000 (00:04 -0500)]
add a script to generator files for building

Signed-off-by: Chun-wei Fan <fanchunwei@src.gnome.org>
13 years agoPost-release version bump
Matthias Clasen [Tue, 5 Jul 2011 15:22:11 +0000 (11:22 -0400)]
Post-release version bump

Up to 2.29.11

13 years ago2.29.10 2.29.10
Matthias Clasen [Tue, 5 Jul 2011 15:21:40 +0000 (11:21 -0400)]
2.29.10

13 years agobuild: Use --disable-maintainer-mode for distcheck
Colin Walters [Tue, 5 Jul 2011 14:20:48 +0000 (10:20 -0400)]
build: Use --disable-maintainer-mode for distcheck

Otherwise due to weird things like gtk-doc.make copying files back
into the source directory, we may run into the maintainer mode
bits mistakenly attempting to rerun.

13 years agogio: Fix srcdir != builddir build for docs
Colin Walters [Tue, 5 Jul 2011 13:42:39 +0000 (09:42 -0400)]
gio: Fix srcdir != builddir build for docs

13 years agoUpdate NEWS for 2.29.10
Matthias Clasen [Tue, 5 Jul 2011 13:17:02 +0000 (09:17 -0400)]
Update NEWS for 2.29.10

13 years agoFix the build
Matthias Clasen [Mon, 4 Jul 2011 20:03:33 +0000 (16:03 -0400)]
Fix the build

When renaming a variable from _SCRIPTS to _DATA, it helps to
also rename all references.

13 years agoDisable a failing test
Matthias Clasen [Mon, 4 Jul 2011 17:09:54 +0000 (13:09 -0400)]
Disable a failing test

13 years agoUpdate GIO VS 2010 project templates
Chun-wei Fan [Mon, 4 Jul 2011 14:21:05 +0000 (22:21 +0800)]
Update GIO VS 2010 project templates

Revert EOL of these files to Unix style as they are to be processed
during "make dist"

13 years agoUpdated GIO Visual Studio Projects
Chun-wei Fan [Mon, 4 Jul 2011 13:47:59 +0000 (21:47 +0800)]
Updated GIO Visual Studio Projects

-In gio/Makefile.am, the name for one of the filters for capturing the
 sources for the GIO VS Project Files is corrected.
-Remove the GIO source file items in the VS project files templates as
 a result for this change, and move the entry of the "new"
 gregistrysettingsbackend.c into the filter in gio/Makefile.am

13 years agoG_STATIC_REC_MUTEX_INIT: Fix missing initialization.
Murray Cumming [Mon, 4 Jul 2011 06:58:00 +0000 (08:58 +0200)]
G_STATIC_REC_MUTEX_INIT: Fix missing initialization.

Add the third struct field, zeroed, to avoid a compiler warning.

13 years agoInstall completion scripts as DATA, not SCRIPTS
Ryan Lortie [Sun, 3 Jul 2011 15:37:35 +0000 (17:37 +0200)]
Install completion scripts as DATA, not SCRIPTS

They are sourced by the shell and don't include a #!/bin/sh, so they shouldn't
be marked as executable.

13 years agogasyncresult: document that NULL GAsyncReadyCallback is allowed
Dan Winship [Wed, 29 Jun 2011 12:29:16 +0000 (08:29 -0400)]
gasyncresult: document that NULL GAsyncReadyCallback is allowed

https://bugzilla.gnome.org/show_bug.cgi?id=653484

13 years agoGCancellable: Fix build on Win32
Dieter Verfaillie [Thu, 30 Jun 2011 13:32:32 +0000 (09:32 -0400)]
GCancellable: Fix build on Win32

https://bugzilla.gnome.org/show_bug.cgi?id=653522

13 years agogio: Some more build fixes
Emmanuele Bassi [Wed, 29 Jun 2011 17:07:29 +0000 (18:07 +0100)]
gio: Some more build fixes

13 years agoFix build
Emmanuele Bassi [Wed, 29 Jun 2011 17:00:53 +0000 (18:00 +0100)]
Fix build

The g_return_val_if_fail() macro takes a return value.

13 years agoparameter guards for GSimpleAction constructors
Ryan Lortie [Wed, 29 Jun 2011 16:19:38 +0000 (17:19 +0100)]
parameter guards for GSimpleAction constructors

13 years agoGAction: make GObject properties read-only
Ryan Lortie [Wed, 29 Jun 2011 16:13:58 +0000 (17:13 +0100)]
GAction: make GObject properties read-only

GAction is a read-only interface (as is visible by the lack of _set() functions
on its API).  The properties on the interface currently force implementors to
support writing of the properties at construct time, however.

Lift that restriction.

Take advantage of this from GSimpleAction by nuking the set_property
function and setting the fields directly in the constructor.

13 years agoactions: merge testcases change_state and entries
Ryan Lortie [Wed, 29 Jun 2011 15:10:38 +0000 (16:10 +0100)]
actions: merge testcases change_state and entries

Since we have support for change_state in GActionEntry now.

13 years agoAdd 'change_state' callback to GActionEntry
Ryan Lortie [Wed, 29 Jun 2011 15:04:09 +0000 (16:04 +0100)]
Add 'change_state' callback to GActionEntry

13 years agoAdd example for 'change-state' signal
Ryan Lortie [Wed, 29 Jun 2011 13:53:24 +0000 (14:53 +0100)]
Add example for 'change-state' signal

Pulled from the testcase.

13 years agoAdd testcase for GSimpleAction::change-state
Ryan Lortie [Wed, 29 Jun 2011 13:44:58 +0000 (14:44 +0100)]
Add testcase for GSimpleAction::change-state

13 years agoAdd 'change-state' signal to GSimpleAction
Ryan Lortie [Wed, 29 Jun 2011 13:35:12 +0000 (14:35 +0100)]
Add 'change-state' signal to GSimpleAction

If connected, allows the user to control the result of
g_action_change_state().

13 years agoAdd example to docs for using GActionEntry
Ryan Lortie [Wed, 29 Jun 2011 12:55:59 +0000 (13:55 +0100)]
Add example to docs for using GActionEntry

13 years agoAdd a test case for GActionEntry
Ryan Lortie [Wed, 29 Jun 2011 12:02:30 +0000 (13:02 +0100)]
Add a test case for GActionEntry

13 years agoAdd g_simple_action_group_add_entries()
Ryan Lortie [Wed, 29 Jun 2011 12:00:30 +0000 (13:00 +0100)]
Add g_simple_action_group_add_entries()

A convenience API for creating lots of actions quickly.

13 years agoallow NULL state in g_simple_action_new_stateful
Ryan Lortie [Wed, 29 Jun 2011 11:28:15 +0000 (12:28 +0100)]
allow NULL state in g_simple_action_new_stateful

as an undocumented feature

13 years agoMake 4 incompatible changes to the GAction API
Ryan Lortie [Wed, 29 Jun 2011 09:11:59 +0000 (10:11 +0100)]
Make 4 incompatible changes to the GAction API

This commit represents an API break to GAction in the following ways:

  - the 'set_state' entry in the GActionInterface vtable has been
    renamed to 'change_state'.  The number and order of vtable items has
    not otherwise changed.

  - g_action_set_state() has been renamed to g_action_change_state() to
    match the updated vtable entry.

  - the "state" property of the GAction interface has been changed to
    read-only to reflect the fact that g_action_set_state() no longer
    exists.

  - GSimpleActionClass has been hidden.  GSimpleAction can no longer be
    subclassed.

>> Rationale

g_action_set_state() has never been a true setter in the sense that
calling it will update the value of the "state" property.  It has always
been closer to "request 'state' to be changed to this value" with
semantics defined by the implementor of the interface.  This is why the
equivalent method in GActionGroup had its name changed from 'set' to
'change'.  This change makes the two interfaces more consistent and
removes any implication about the effect that calling set_state() should
have on the 'state' property.

>> Impact

This incompatible API break was undertaken only because I strongly
suspect that it will go entirely unnoticed.  If the break actually
affects anybody, then we will accommodate them (possibly going as far as
to revert this commit entirely).

The virtual table change only impacts implementors of GAction.  I
strongly suspect that this is nobody (except for GSimpleAction).

The hiding of GSimpleActionClass only impacts impacts subclasses of
GSimpleAction.  I strongly suspect that none of these exist.

The changing of the property to be read-only only affects people who
were trying to change the state by using GObject properties.  I strongly
suspect that this is nobody at all.

The removal of the g_action_set_state() call is the most dangerous, but
I still suspect that it will impact nobody outside of GLib.  If anybody
is impacted by this change then, at their request, I will reintroduce
the API as a deprecated alias for g_action_change_state().

13 years agoUpdate Visual Studio README.txt's
Chun-wei Fan [Wed, 29 Jun 2011 06:07:38 +0000 (14:07 +0800)]
Update Visual Studio README.txt's

-The VS2010 README.txt should have Windows CRLF EOL.
-Tell people about the added dependency on LibFFI

13 years agoRe-attempt to correct EOL on VS2010 solution
Chun-wei Fan [Wed, 29 Jun 2011 04:36:24 +0000 (12:36 +0800)]
Re-attempt to correct EOL on VS2010 solution

This time I realized that I needed to set autocrlf=false on my Windows side
... ugh...

This is one of those files that must have CRLF line endings to work
orrectly :|

13 years agoGCancellable: Fix build on Win32
Colin Walters [Tue, 28 Jun 2011 16:52:58 +0000 (12:52 -0400)]
GCancellable: Fix build on Win32

https://bugzilla.gnome.org/show_bug.cgi?id=653522

13 years agogmain: Fall back to pipes if kernel doesn't support EFD_CLOEXEC for eventfd()
Colin Walters [Tue, 28 Jun 2011 14:03:15 +0000 (10:03 -0400)]
gmain: Fall back to pipes if kernel doesn't support EFD_CLOEXEC for eventfd()

Also remove the caching of checking for eventfd; just try it every time, it's
cheap enough to do so.

https://bugzilla.gnome.org/show_bug.cgi?id=653570

13 years agoUpdated Belarusian translation.
Ihar Hrachyshka [Mon, 27 Jun 2011 23:02:34 +0000 (02:02 +0300)]
Updated Belarusian translation.

13 years agoUpdated Belarusian translation.
Ihar Hrachyshka [Mon, 27 Jun 2011 22:27:27 +0000 (01:27 +0300)]
Updated Belarusian translation.

13 years agoChange to AM_MAINTAINER_MODE([enable])
Ryan Lortie [Mon, 27 Jun 2011 10:28:55 +0000 (11:28 +0100)]
Change to AM_MAINTAINER_MODE([enable])

Fixes https://bugzilla.gnome.org/show_bug.cgi?id=653429

13 years agoUpdated Belarusian translation.
Ihar Hrachyshka [Sat, 25 Jun 2011 16:14:09 +0000 (19:14 +0300)]
Updated Belarusian translation.

13 years agoGSimpleAction: fix typo
Claudio Saavedra [Fri, 24 Jun 2011 13:04:54 +0000 (16:04 +0300)]
GSimpleAction: fix typo

13 years agoTypo fix.
Krzesimir Nowak [Fri, 24 Jun 2011 11:20:06 +0000 (13:20 +0200)]
Typo fix.

Fixes jhbuilding gobject-introspection.

13 years agoRefine Visual Studio Projects
Chun-wei Fan [Fri, 24 Jun 2011 03:22:47 +0000 (11:22 +0800)]
Refine Visual Studio Projects

-Reinstate build/win32/vs10/glib.sln with the correct EOL (DOS/Windows) so
 that the file can be correctly recognized by Windows, rather than having
 the "Unrecognized Visual Studio Version".

-Update the main GLib projects to output the DLL/LIB file into <Release or
 Debug>\<Win32 or x64>\bin for all configurations.

-Update/simplify the property sheets to copy all DLL and LIB files from
 <Release or Debug>\<Win32 or x64>\bin for all configurations.

-Update the VS 2008 property sheet to seperate the intermediate directories
 for all projects as well to avoid errors/warnings of being unable to
 write/access the PDB files as they are in use.

13 years agoTemporarily remove build/win32/vs10/glib.sln
Chun-wei Fan [Fri, 24 Jun 2011 03:13:33 +0000 (11:13 +0800)]
Temporarily remove build/win32/vs10/glib.sln

To fix up for the line endings (this needs to be in the DOS/Windows
format)

13 years agoUnicode: add a g_utf8_substring convenience api
Matthias Clasen [Fri, 24 Jun 2011 01:31:40 +0000 (21:31 -0400)]
Unicode: add a g_utf8_substring convenience api

This function is useful in the GTK+ accessibility implementations,
and seems like a nice thing to have around in general.

13 years agoTypo fix
Christian Persch [Thu, 23 Jun 2011 23:07:18 +0000 (01:07 +0200)]
Typo fix

13 years agoPlug a mem leak in the regex test
Christian Persch [Thu, 23 Jun 2011 16:35:40 +0000 (18:35 +0200)]
Plug a mem leak in the regex test

13 years agoAdd boxed GType for GMatchInfo
Christian Persch [Thu, 23 Jun 2011 16:31:29 +0000 (18:31 +0200)]
Add boxed GType for GMatchInfo

13 years agoMake GMatchInfo refcounted
Christian Persch [Thu, 23 Jun 2011 16:27:29 +0000 (18:27 +0200)]
Make GMatchInfo refcounted

13 years agobuild: fix gtk-doc when srcdir != builddir
Patrick Welche [Thu, 23 Jun 2011 14:08:46 +0000 (15:08 +0100)]
build: fix gtk-doc when srcdir != builddir

https://bugzilla.gnome.org/show_bug.cgi?id=653250

13 years agoFix typo in GTime docs
Sebastian Dröge [Thu, 23 Jun 2011 07:34:59 +0000 (09:34 +0200)]
Fix typo in GTime docs

deprected -> deprecated

13 years agoAdd tests for GValueArray
Matthias Clasen [Tue, 21 Jun 2011 04:54:00 +0000 (00:54 -0400)]
Add tests for GValueArray

13 years agoImprove test coverage for GValue transformations
Matthias Clasen [Tue, 21 Jun 2011 04:52:43 +0000 (00:52 -0400)]
Improve test coverage for GValue transformations

13 years agoRun some tests with errorcheck mutexes too
Matthias Clasen [Tue, 21 Jun 2011 04:51:57 +0000 (00:51 -0400)]
Run some tests with errorcheck mutexes too

All in the name of better test coverage.

13 years agoUpdated Russian translation
Yuri Kozlov [Wed, 22 Jun 2011 16:10:43 +0000 (20:10 +0400)]
Updated Russian translation

13 years agoUpdate config.h.win32(.in)
Chun-wei Fan [Wed, 22 Jun 2011 07:22:55 +0000 (15:22 +0800)]
Update config.h.win32(.in)

Make file contents more like the config.h(.in) contents

13 years agobuild: Cache check for futex() and eventfd()
Colin Walters [Wed, 22 Jun 2011 03:24:07 +0000 (23:24 -0400)]
build: Cache check for futex() and eventfd()

13 years agoGCancellable: Use Linux eventfd() instead of pipe
Colin Walters [Wed, 22 Jun 2011 01:43:19 +0000 (21:43 -0400)]
GCancellable: Use Linux eventfd() instead of pipe

See commit f626dd2b4311bd82137c5b208ab2de288c3e6fae for rationale;
basically it's cheaper than a pipe.

https://bugzilla.gnome.org/show_bug.cgi?id=653140

13 years agogmain: use Linux eventfd() for main context wake up
Colin Walters [Tue, 21 Jun 2011 23:01:10 +0000 (19:01 -0400)]
gmain: use Linux eventfd() for main context wake up

The Linux eventfd() call is basically tailor made for the main loop
wake up pipe - all we want is a threadsafe way to write to a file
descriptor, and wake up the context on the other end; we don't care
about the content at all.

The eventfd manual page basically explains the benefits:

       Applications can use an eventfd file descriptor instead of a
       pipe (see pipe(2)) in all cases where a pipe is used simply to
       signal events.  The kernel overhead of an eventfd file
       descriptor is much lower than that of a pipe, and only one file
       descriptor is required (versus the two required for a pipe).

When writing my multithreaded spawn test case I actually hit the 1024
file descriptor limit quickly, because we used 2 fds per main context.
This brings that down to 1.

https://bugzilla.gnome.org/show_bug.cgi?id=653140

13 years agogio/Makefile.am: Remove stray references to $(marshal_sources)
Dan Winship [Tue, 21 Jun 2011 20:14:50 +0000 (16:14 -0400)]
gio/Makefile.am: Remove stray references to $(marshal_sources)

13 years agoFix a srcdir!=builddir issue, and export that we support it
Colin Walters [Tue, 21 Jun 2011 14:26:58 +0000 (10:26 -0400)]
Fix a srcdir!=builddir issue, and export that we support it

Future jhbuild versions will consume the BUILD API and automatically
use a builddir, so mark us as supporting it.

13 years agoUpdated Galician translations
Fran Diéguez [Tue, 21 Jun 2011 11:55:31 +0000 (13:55 +0200)]
Updated Galician translations

13 years agoAdd iter_replace API to GHashTableIter
Philip Van Hoof [Sat, 18 Jun 2011 17:40:34 +0000 (19:40 +0200)]
Add iter_replace API to GHashTableIter

https://bugzilla.gnome.org/show_bug.cgi?id=652822

13 years agoMake gmarshal.c actually compile standalone
Matthias Clasen [Tue, 21 Jun 2011 02:49:34 +0000 (22:49 -0400)]
Make gmarshal.c actually compile standalone

It was lacking the necessary includes; in the past it has been
included towards the bottom of gsignal.c, and gained its includes
that way.

13 years agoStop using glib-genmarshal at build time
Colin Walters [Mon, 20 Jun 2011 13:06:07 +0000 (09:06 -0400)]
Stop using glib-genmarshal at build time

To help cross compilation, don't use glib-genmarshal in our
build.  This is easy now that we have g_cclosure_marshal_generic().

In gobject/, add gmarshal.[ch] to git (making the existing entry
points stubs).

In gio/, simply switch to using g_cclosure_marshal_generic().

https://bugzilla.gnome.org/show_bug.cgi?id=652168

13 years agoGDBus: Unref worker from worker-thread to avoid race
David Zeuthen [Mon, 20 Jun 2011 20:32:03 +0000 (16:32 -0400)]
GDBus: Unref worker from worker-thread to avoid race

... otherwise we might end up using the worker after it has been
freed. Reported by Dan Winship and Colin Walters.

This fix uncovered a bug in the /gdbus/nonce-tcp test case so "fix"
that as well to use a better way of having one thread wait for another
(using quotes for the word "fix" since it's pretty hackish to
busy-wait in one thread to wait for another).

Signed-off-by: David Zeuthen <davidz@redhat.com>
13 years agogthread tests: Remove spurious return;
Colin Walters [Mon, 20 Jun 2011 18:09:31 +0000 (14:09 -0400)]
gthread tests: Remove spurious return;

13 years agogclosure: Add G_TYPE_ENUM and G_TYPE_PARAM for g_cclosure_marshal_generic()
Colin Walters [Mon, 20 Jun 2011 15:15:27 +0000 (11:15 -0400)]
gclosure: Add G_TYPE_ENUM and G_TYPE_PARAM for g_cclosure_marshal_generic()

These are fundamental types missed in the original commit.

13 years agogdbus-test-codegen: Allocate full integer space for uint16 properties
Colin Walters [Mon, 20 Jun 2011 17:41:52 +0000 (13:41 -0400)]
gdbus-test-codegen: Allocate full integer space for uint16 properties

Because there is no G_TYPE_[U]INT16, we need to use integer types,
otherwise we'll end up overwriting memory (in this case on the stack).

13 years agoconfigure.ac: Generate xz tarballs by default
Javier Jardón [Mon, 20 Jun 2011 10:48:25 +0000 (11:48 +0100)]
configure.ac: Generate xz tarballs by default

13 years agoVisual C++ 2010 project files update
Chun-wei Fan [Mon, 20 Jun 2011 03:50:57 +0000 (11:50 +0800)]
Visual C++ 2010 project files update

Consolidate my previous commit into property file... should have realized
this sooner...

13 years agoUpdate Visual C++ 2010 Projects
Chun-wei Fan [Mon, 20 Jun 2011 03:34:15 +0000 (11:34 +0800)]
Update Visual C++ 2010 Projects

-Seperate intermediate directories for each project to avoid intermittent
 MSBuild errors that a build log cannot be written while in use, and
 update the property sheet as necessary.
-Minor cleanups of uneeded tags in the projects/properties

13 years agoClarify nul-termination of g_utf8_to_ucs4[_fast] result
Christian Persch [Sat, 18 Jun 2011 14:22:53 +0000 (16:22 +0200)]
Clarify nul-termination of g_utf8_to_ucs4[_fast] result

The docs for g_utf8_to_ucs4_fast didn't mention that the resulting
string is terminated by a 0 character.

Bug #652897.

13 years agoAdd tests for GCache
Matthias Clasen [Sun, 19 Jun 2011 05:42:48 +0000 (01:42 -0400)]
Add tests for GCache

13 years agoasyncqueue: improve test coverage
Matthias Clasen [Sun, 19 Jun 2011 05:05:26 +0000 (01:05 -0400)]
asyncqueue: improve test coverage

13 years agoutils: silence tests unless verbose
Matthias Clasen [Sun, 19 Jun 2011 05:05:05 +0000 (01:05 -0400)]
utils: silence tests unless verbose

13 years agologging: improve test coverage
Matthias Clasen [Sun, 19 Jun 2011 05:04:48 +0000 (01:04 -0400)]
logging: improve test coverage

13 years agohash: Improve test coverage
Matthias Clasen [Sun, 19 Jun 2011 05:04:30 +0000 (01:04 -0400)]
hash: Improve test coverage