io_uring/fs: remove sqe->rw_flags checking from LINKAT

commit a52d4f657568d6458e873f74a9602e022afe666f upstream.

This is unionized with the actual link flags, so they can of course be
set and they will be evaluated further down. If not we fail any LINKAT
that has to set option flags.

Fixes: cf30da90bc3a ("io_uring: add support for IORING_OP_LINKAT")
Cc: stable@vger.kernel.org
Reported-by: Thomas Leonard <talex5@gmail.com>
Link: https://github.com/axboe/liburing/issues/955
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ata: libata-scsi: ignore reserved bits for REPORT SUPPORTED OPERATION CODES

commit 3ef600923521616ebe192c893468ad0424de2afb upstream.

For REPORT SUPPORTED OPERATION CODES command, the service action field is
defined as bits 0-4 in the second byte in the CDB. Bits 5-7 in the second
byte are reserved.

Only look at the service action field in the second byte when determining
if the MAINTENANCE IN opcode is a REPORT SUPPORTED OPERATION CODES command.

This matches how we only look at the service action field in the second
byte when determining if the SERVICE ACTION IN(16) opcode is a READ
CAPACITY(16) command (reserved bits 5-7 in the second byte are ignored).

Fixes: 7b2030942859 ("libata: Add support for SCT Write Same")
Cc: stable@vger.kernel.org
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ata: libata-scsi: link ata port and scsi device

commit fb99ef17865035a6657786d4b2af11a27ba23f9b upstream.

There is no direct device ancestry defined between an ata_device and
its scsi device which prevents the power management code from correctly
ordering suspend and resume operations. Create such ancestry with the
ata device as the parent to ensure that the scsi device (child) is
suspended before the ata device and that resume handles the ata device
before the scsi device.

The parent-child (supplier-consumer) relationship is established between
the ata_port (parent) and the scsi device (child) with the function
device_add_link(). The parent used is not the ata_device as the PM
operations are defined per port and the status of all devices connected
through that port is controlled from the port operations.

The device link is established with the new function
ata_scsi_slave_alloc(), and this function is used to define the
->slave_alloc callback of the scsi host template of all ata drivers.

Fixes: a19a93e4c6a9 ("scsi: core: pm: Rely on the device driver core for async power management")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

LoongArch: numa: Fix high_memory calculation

commit 1943feecf80e73ecc03ce40271f29c6cea142bac upstream.

For 64bit kernel without HIGHMEM, high_memory is the virtual address of
the highest physical address in the system. But __va(get_num_physpages()
<< PAGE_SHIFT) is not what we want for high_memory because there may be
holes in the physical address space. On the other hand, max_low_pfn is
calculated from memblock_end_of_DRAM(), which is exactly corresponding
to the highest physical address, so use it for high_memory calculation.

Cc: <stable@vger.kernel.org>
Fixes: d4b6f1562a3c3284adce ("LoongArch: Add Non-Uniform Memory Access (NUMA) support")
Signed-off-by: Chong Qiao <qiaochong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

LoongArch: Define relocation types for ABI v2.10

commit 2761498876adebff77a43574639005b29e912c43 upstream.

The relocation types from 101 to 109 are used by GNU binutils >= 2.41,
add their definitions to use them in later patches.

Link: https://sourceware.org/git/?p=binutils-gdb.git;a=blob;f=include/elf/loongarch.h#l230
Cc: <stable@vger.kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: Disable power save for solving pop issue on Lenovo ThinkCentre M70q

commit 057a28ef93bdbe84326d34cdb5543afdaab49fe1 upstream.

Lenovo ThinkCentre M70q had boot up pop noise.
Disable power save will solve pop issue.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/315900e2efef42fd9855eacfeb443abd@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: disallow rule removal from chain binding

[ Upstream commit f15f29fd4779be8a418b66e9d52979bb6d6c2325 ]

Chain binding only requires the rule addition/insertion command within
the same transaction. Removal of rules from chain bindings within the
same transaction makes no sense, userspace does not utilize this
feature. Replace nft_chain_is_bound() check to nft_chain_binding() in
rule deletion commands. Replace command implies a rule deletion, reject
this command too.

Rule flush command can also safely rely on this nft_chain_binding()
check because unbound chains are not allowed since 62e1e94b246e
("netfilter: nf_tables: reject unbound chain set before commit phase").

Fixes: d0e2c7de92c7 ("netfilter: nf_tables: add NFT_CHAIN_BINDING")
Reported-by: Kevin Rich <kevinrich1337@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nilfs2: fix potential use after free in nilfs_gccache_submit_read_data()

commit 7ee29facd8a9c5a26079148e36bcf07141b3a6bc upstream.

In nilfs_gccache_submit_read_data(), brelse(bh) is called to drop the
reference count of bh when the call to nilfs_dat_translate() fails.  If
the reference count hits 0 and its owner page gets unlocked, bh may be
freed.  However, bh->b_page is dereferenced to put the page after that,
which may result in a use-after-free bug.  This patch moves the release
operation after unlocking and putting the page.

NOTE: The function in question is only called in GC, and in combination
with current userland tools, address translation using DAT does not occur
in that function, so the code path that causes this issue will not be
executed.  However, it is possible to run that code path by intentionally
modifying the userland GC library or by calling the GC ioctl directly.

[konishi.ryusuke@gmail.com: NOTE added to the commit log]
Link: https://lkml.kernel.org/r/1543201709-53191-1-git-send-email-bianpan2016@163.com
Link: https://lkml.kernel.org/r/20230921141731.10073-1-konishi.ryusuke@gmail.com
Fixes: a3d93f709e89 ("nilfs2: block cache for garbage collection")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reported-by: Ferry Meng <mengferry@linux.alibaba.com>
Closes: https://lkml.kernel.org/r/20230818092022.111054-1-mengferry@linux.alibaba.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250_port: Check IRQ data before use

commit cce7fc8b29961b64fadb1ce398dc5ff32a79643b upstream.

In case the leaf driver wants to use IRQ polling (irq = 0) and
IIR register shows that an interrupt happened in the 8250 hardware
the IRQ data can be NULL. In such a case we need to skip the wake
event as we came to this path from the timer interrupt and quite
likely system is already awake.

Without this fix we have got an Oops:

    serial8250: ttyS0 at I/O 0x3f8 (irq = 0, base_baud = 115200) is a 16550A
    ...
    BUG: kernel NULL pointer dereference, address: 0000000000000010
    RIP: 0010:serial8250_handle_irq+0x7c/0x240
    Call Trace:
     ? serial8250_handle_irq+0x7c/0x240
     ? __pfx_serial8250_timeout+0x10/0x10

Fixes: 0ba9e3a13c6a ("serial: 8250: Add missing wakeup event reporting")
Cc: stable <stable@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230831222555.614426-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "tty: n_gsm: fix UAF in gsm_cleanup_mux"

commit 29346e217b8ab8a52889b88f00b268278d6b7668 upstream.

This reverts commit 9b9c8195f3f0d74a826077fc1c01b9ee74907239.

The commit above is reverted as it did not solve the original issue.

gsm_cleanup_mux() tries to free up the virtual ttys by calling
gsm_dlci_release() for each available DLCI. There, dlci_put() is called to
decrease the reference counter for the DLCI via tty_port_put() which
finally calls gsm_dlci_free(). This already clears the pointer which is
being checked in gsm_cleanup_mux() before calling gsm_dlci_release().
Therefore, it is not necessary to clear this pointer in gsm_cleanup_mux()
as done in the reverted commit. The commit introduces a null pointer
dereference:
 <TASK>
 ? __die+0x1f/0x70
 ? page_fault_oops+0x156/0x420
 ? search_exception_tables+0x37/0x50
 ? fixup_exception+0x21/0x310
 ? exc_page_fault+0x69/0x150
 ? asm_exc_page_fault+0x26/0x30
 ? tty_port_put+0x19/0xa0
 gsmtty_cleanup+0x29/0x80 [n_gsm]
 release_one_tty+0x37/0xe0
 process_one_work+0x1e6/0x3e0
 worker_thread+0x4c/0x3d0
 ? __pfx_worker_thread+0x10/0x10
 kthread+0xe1/0x110
 ? __pfx_kthread+0x10/0x10
 ret_from_fork+0x2f/0x50
 ? __pfx_kthread+0x10/0x10
 ret_from_fork_asm+0x1b/0x30
 </TASK>

The actual issue is that nothing guards dlci_put() from being called
multiple times while the tty driver was triggered but did not yet finished
calling gsm_dlci_free().

Fixes: 9b9c8195f3f0 ("tty: n_gsm: fix UAF in gsm_cleanup_mux")
Cc: stable <stable@kernel.org>
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20230914051507.3240-1-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: rtsx: Fix some platforms can not boot and move the l1ss judgment to probe

commit 0e4cac557531a4c93de108d9ff11329fcad482ff upstream.

commit 101bd907b424 ("misc: rtsx: judge ASPM Mode to set PETXCFG Reg")
some readers no longer force #CLKREQ to low
when the system need to enter ASPM.
But some platform maybe not implement complete ASPM?
it causes some platforms can not boot

Like in the past only the platform support L1ss we release the #CLKREQ.
Move the judgment (L1ss) to probe,
we think read config space one time when the driver start is enough

Fixes: 101bd907b424 ("misc: rtsx: judge ASPM Mode to set PETXCFG Reg")
Cc: stable <stable@kernel.org>
Reported-by: Paul Grandperrin <paul.grandperrin@gmail.com>
Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
Tested-By: Jade Lovelace <lists@jade.fyi>
Link: https://lore.kernel.org/r/37b1afb997f14946a8784c73d1f9a4f5@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mptcp: fix bogus receive window shrinkage with multiple subflows

commit 6bec041147a2a64a490d1f813e8a004443061b38 upstream.

In case multiple subflows race to update the mptcp-level receive
window, the subflow losing the race should use the window value
provided by the "winning" subflow to update it's own tcp-level
rcv_wnd.

To such goal, the current code bogusly uses the mptcp-level rcv_wnd
value as observed before the update attempt. On unlucky circumstances
that may lead to TCP-level window shrinkage, and stall the other end.

Address the issue feeding to the rcv wnd update the correct value.

Fixes: f3589be0c420 ("mptcp: never shrink offered window")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/427
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86/mmu: Do not filter address spaces in for_each_tdp_mmu_root_yield_safe()

commit 441a5dfcd96854cbcb625709e2694a9c60adfaab upstream.

All callers except the MMU notifier want to process all address spaces.
Remove the address space ID argument of for_each_tdp_mmu_root_yield_safe()
and switch the MMU notifier to use __for_each_tdp_mmu_root_yield_safe().

Extracted out of a patch by Sean Christopherson <seanjc@google.com>

Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86/mmu: Open code leaf invalidation from mmu_notifier

commit 50107e8b2a8a59d8cec7e8454e27c1f8e365acdb upstream.

The mmu_notifier path is a bit of a special snowflake, e.g. it zaps only a
single address space (because it's per-slot), and can't always yield.
Because of this, it calls kvm_tdp_mmu_zap_leafs() in ways that no one
else does.

Iterate manually over the leafs in response to an mmu_notifier
invalidation, instead of invoking kvm_tdp_mmu_zap_leafs().  Drop the
@can_yield param from kvm_tdp_mmu_zap_leafs() as its sole remaining
caller unconditionally passes "true".

Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230916003916.2545000-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: SVM: Fix TSC_AUX virtualization setup

commit e0096d01c4fcb8c96c05643cfc2c20ab78eae4da upstream.

The checks for virtualizing TSC_AUX occur during the vCPU reset processing
path. However, at the time of initial vCPU reset processing, when the vCPU
is first created, not all of the guest CPUID information has been set. In
this case the RDTSCP and RDPID feature support for the guest is not in
place and so TSC_AUX virtualization is not established.

This continues for each vCPU created for the guest. On the first boot of
an AP, vCPU reset processing is executed as a result of an APIC INIT
event, this time with all of the guest CPUID information set, resulting
in TSC_AUX virtualization being enabled, but only for the APs. The BSP
always sees a TSC_AUX value of 0 which probably went unnoticed because,
at least for Linux, the BSP TSC_AUX value is 0.

Move the TSC_AUX virtualization enablement out of the init_vmcb() path and
into the vcpu_after_set_cpuid() path to allow for proper initialization of
the support after the guest CPUID information has been set.

With the TSC_AUX virtualization support now in the vcpu_set_after_cpuid()
path, the intercepts must be either cleared or set based on the guest
CPUID input.

Fixes: 296d5a17e793 ("KVM: SEV-ES: Use V_TSC_AUX if available instead of RDTSC/MSR_TSC_AUX intercepts")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <4137fbcb9008951ab5f0befa74a0399d2cce809a.1694811272.git.thomas.lendacky@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: SVM: INTERCEPT_RDTSCP is never intercepted anyway

commit e8d93d5d93f85949e7299be289c6e7e1154b2f78 upstream.

svm_recalc_instruction_intercepts() is always called at least once
before the vCPU is started, so the setting or clearing of the RDTSCP
intercept can be dropped from the TSC_AUX virtualization support.

Extracted from a patch by Tom Lendacky.

Cc: stable@vger.kernel.org
Fixes: 296d5a17e793 ("KVM: SEV-ES: Use V_TSC_AUX if available instead of RDTSC/MSR_TSC_AUX intercepts")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/srso: Add SRSO mitigation for Hygon processors

commit a5ef7d68cea1344cf524f04981c2b3f80bedbb0d upstream.

Add mitigation for the speculative return stack overflow vulnerability
which exists on Hygon processors too.

Signed-off-by: Pu Wen <puwen@hygon.cn>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/tencent_4A14812842F104E93AA722EC939483CEFF05@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/sgx: Resolves SECS reclaim vs. page fault for EAUG race

commit c6c2adcba50c2622ed25ba5d5e7f05f584711358 upstream.

The SGX EPC reclaimer (ksgxd) may reclaim the SECS EPC page for an
enclave and set secs.epc_page to NULL. The SECS page is used for EAUG
and ELDU in the SGX page fault handler. However, the NULL check for
secs.epc_page is only done for ELDU, not EAUG before being used.

Fix this by doing the same NULL check and reloading of the SECS page as
needed for both EAUG and ELDU.

The SECS page holds global enclave metadata. It can only be reclaimed
when there are no other enclave pages remaining. At that point,
virtually nothing can be done with the enclave until the SECS page is
paged back in.

An enclave can not run nor generate page faults without a resident SECS
page. But it is still possible for a #PF for a non-SECS page to race
with paging out the SECS page: when the last resident non-SECS page A
triggers a #PF in a non-resident page B, and then page A and the SECS
both are paged out before the #PF on B is handled.

Hitting this bug requires that race triggered with a #PF for EAUG.
Following is a trace when it happens.

BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:sgx_encl_eaug_page+0xc7/0x210
Call Trace:
 ? __kmem_cache_alloc_node+0x16a/0x440
 ? xa_load+0x6e/0xa0
 sgx_vma_fault+0x119/0x230
 __do_fault+0x36/0x140
 do_fault+0x12f/0x400
 __handle_mm_fault+0x728/0x1110
 handle_mm_fault+0x105/0x310
 do_user_addr_fault+0x1ee/0x750
 ? __this_cpu_preempt_check+0x13/0x20
 exc_page_fault+0x76/0x180
 asm_exc_page_fault+0x27/0x30

Fixes: 5a90d2c3f5ef ("x86/sgx: Support adding of pages to an initialized enclave")
Signed-off-by: Haitao Huang <haitao.huang@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20230728051024.33063-1-haitao.huang%40linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/arm-smmu-v3: Fix soft lockup triggered by arm_smmu_mm_invalidate_range

commit d5afb4b47e13161b3f33904d45110f9e6463bad6 upstream.

When running an SVA case, the following soft lockup is triggered:
--------------------------------------------------------------------
watchdog: BUG: soft lockup - CPU#244 stuck for 26s!
pstate: 83400009 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : arm_smmu_cmdq_issue_cmdlist+0x178/0xa50
lr : arm_smmu_cmdq_issue_cmdlist+0x150/0xa50
sp : ffff8000d83ef290
x29: ffff8000d83ef290 x28: 000000003b9aca00 x27: 0000000000000000
x26: ffff8000d83ef3c0 x25: da86c0812194a0e8 x24: 0000000000000000
x23: 0000000000000040 x22: ffff8000d83ef340 x21: ffff0000c63980c0
x20: 0000000000000001 x19: ffff0000c6398080 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: ffff3000b4a3bbb0
x14: ffff3000b4a30888 x13: ffff3000b4a3cf60 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : ffffc08120e4d6bc
x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000048cfa
x5 : 0000000000000000 x4 : 0000000000000001 x3 : 000000000000000a
x2 : 0000000080000000 x1 : 0000000000000000 x0 : 0000000000000001
Call trace:
 arm_smmu_cmdq_issue_cmdlist+0x178/0xa50
 __arm_smmu_tlb_inv_range+0x118/0x254
 arm_smmu_tlb_inv_range_asid+0x6c/0x130
 arm_smmu_mm_invalidate_range+0xa0/0xa4
 __mmu_notifier_invalidate_range_end+0x88/0x120
 unmap_vmas+0x194/0x1e0
 unmap_region+0xb4/0x144
 do_mas_align_munmap+0x290/0x490
 do_mas_munmap+0xbc/0x124
 __vm_munmap+0xa8/0x19c
 __arm64_sys_munmap+0x28/0x50
 invoke_syscall+0x78/0x11c
 el0_svc_common.constprop.0+0x58/0x1c0
 do_el0_svc+0x34/0x60
 el0_svc+0x2c/0xd4
 el0t_64_sync_handler+0x114/0x140
 el0t_64_sync+0x1a4/0x1a8
--------------------------------------------------------------------

The commit 06ff87bae8d3 ("arm64: mm: remove unused functions and variable
protoypes") fixed a similar lockup on the CPU MMU side. Yet, it can occur
to SMMU too since arm_smmu_mm_invalidate_range() is typically called next
to MMU tlb flush function, e.g.
tlb_flush_mmu_tlbonly {
tlb_flush {
__flush_tlb_range {
// check MAX_TLBI_OPS
}
}
mmu_notifier_invalidate_range {
arm_smmu_mm_invalidate_range {
// does not check MAX_TLBI_OPS
}
}
}

Clone a CMDQ_MAX_TLBI_OPS from the MAX_TLBI_OPS in tlbflush.h, since in an
SVA case SMMU uses the CPU page table, so it makes sense to align with the
tlbflush code. Then, replace per-page TLBI commands with a single per-asid
TLBI command, if the request size hits this threshold.

Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20230920052257.8615-1-nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

smack: Retrieve transmuting information in smack_inode_getsecurity()

[ Upstream commit 3a3d8fce31a49363cc31880dce5e3b0617c9c38b ]

Enhance smack_inode_getsecurity() to retrieve the value for
SMACK64TRANSMUTE from the inode security blob, similarly to SMACK64.

This helps to display accurate values in the situation where the security
labels come from mount options and not from xattrs.

Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

smack: Record transmuting in smk_transmuted

[ Upstream commit 2c085f3a8f23c9b444e8b99d93c15d7ce870fc4e ]

smack_dentry_create_files_as() determines whether transmuting should occur
based on the label of the parent directory the new inode will be added to,
and not the label of the directory where it is created.

This helps for example to do transmuting on overlayfs, since the latter
first creates the inode in the working directory, and then moves it to the
correct destination.

However, despite smack_dentry_create_files_as() provides the correct label,
smack_inode_init_security() does not know from passed information whether
or not transmuting occurred. Without this information,
smack_inode_init_security() cannot set SMK_INODE_CHANGED in smk_flags,
which will result in the SMACK64TRANSMUTE xattr not being set in
smack_d_instantiate().

Thus, add the smk_transmuted field to the task_smack structure, and set it
in smack_dentry_create_files_as() to smk_task if transmuting occurred. If
smk_task is equal to smk_transmuted in smack_inode_init_security(), act as
if transmuting was successful but without taking the label from the parent
directory (the inode label was already set correctly from the current
credentials in smack_inode_alloc_security()).

Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-pci: always return an ERR_PTR from nvme_pci_alloc_dev

[ Upstream commit dc785d69d753a3894c93afc23b91404652382ead ]

Don't mix NULL and ERR_PTR returns.

Fixes: 2e87570be9d2 ("nvme-pci: factor out a nvme_pci_alloc_dev helper")
Signed-off-by: Irvin Cote <irvin.cote@insa-lyon.fr>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Fix NULL pointer dereference in target mode

[ Upstream commit d54820b22e404b06b2b65877ff802cc7b31688bc ]

When target mode is enabled, the pci_irq_get_affinity() function may return
a NULL value in qla_mapq_init_qp_cpu_map() due to the qla24xx_enable_msix()
code that handles IRQ settings for target mode. This leads to a crash due
to a NULL pointer dereference.

This patch fixes the issue by adding a check for the NULL value returned by
pci_irq_get_affinity() and introducing a 'cpu_mapped' boolean flag to the
qla_qpair structure, ensuring that the qpair's CPU affinity is updated when
it has not been mapped to a CPU.

Fixes: 1d201c81d4cc ("scsi: qla2xxx: Select qpair depending on which CPU post_cmd() gets called")
Signed-off-by: Gleb Chesnokov <gleb.chesnokov@scst.dev>
Link: https://lore.kernel.org/r/56b416f2-4e0f-b6cf-d6d5-b7c372e3c6a2@scst.dev
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath11k: Don't drop tx_status when peer cannot be found

[ Upstream commit 400ece6c7f346b0a30867bd00b03b5b2563d4357 ]

When a station idles for a long time, hostapd will try to send a QoS Null
frame to the station as "poll". NL80211_CMD_PROBE_CLIENT is used for this
purpose. And the skb will be added to ack_status_frame - waiting for a
completion via ieee80211_report_ack_skb().

But when the peer was already removed before the tx_complete arrives, the
peer will be missing. And when using dev_kfree_skb_any (instead of going
through mac80211), the entry will stay inside ack_status_frames. This IDR
will therefore run full after 8K request were generated for such clients.
At this point, the access point will then just stall and not allow any new
clients because idr_alloc() for ack_status_frame will fail.

ieee80211_free_txskb() on the other hand will (when required) call
ieee80211_report_ack_skb() and make sure that (when required) remove the
entry from the ack_status_frame.

Tested-on: IPQ6018 hw1.0 WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1

Fixes: 6257c702264c ("wifi: ath11k: fix tx status reporting in encap offload mode")
Fixes: 94739d45c388 ("ath11k: switch to using ieee80211_tx_status_ext()")
Cc: stable@vger.kernel.org
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230802-ath11k-ack_status_leak-v2-1-c0af729d6229@narfation.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-pci: do not set the NUMA node of device if it has none

[ Upstream commit dad651b2a44eb6b201738f810254279dca29d30d ]

If a device has no NUMA node information associated with it, the driver
puts the device in node first_memory_node (say node 0). Not having a
NUMA node and being associated with node 0 are completely different
things and it makes little sense to mix the two.

Signed-off-by: Pratyush Yadav <ptyadav@amazon.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-pci: factor out a nvme_pci_alloc_dev helper

[ Upstream commit 2e87570be9d2746e7c4e7ab1cc18fd3ca7de2768 ]

Add a helper that allocates the nvme_dev structure up to the point where
we can call nvme_init_ctrl.  This pairs with the free_ctrl method and can
thus be used to cleanup the teardown path and make it more symmetric.

Note that this now calls nvme_init_ctrl a lot earlier during probing,
which also means the per-controller character device shows up earlier.
Due to the controller state no commnds can be send on it, but it might
make sense to delay the cdev registration until nvme_init_ctrl_finish.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by Gerd Bayer <gbayer@linxu.ibm.com>
Stable-dep-of: dad651b2a44e ("nvme-pci: do not set the NUMA node of device if it has none")
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-pci: factor the iod mempool creation into a helper

[ Upstream commit 081a7d958ce4b65f9aab6e70e65b0b2e0b92297c ]

Add a helper to create the iod mempool.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by Gerd Bayer <gbayer@linxu.ibm.com>
Stable-dep-of: dad651b2a44e ("nvme-pci: do not set the NUMA node of device if it has none")
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf build: Define YYNOMEM as YYNOABORT for bison < 3.81

[ Upstream commit 88cc47e24597971b05b6e94c28a2fc81d2a8d61a ]

YYNOMEM was introduced in bison 3.81, so define it as YYABORT for older
versions, which should provide the previous perf behaviour.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev/sh7760fb: Depend on FB=y

[ Upstream commit f75f71b2c418a27a7c05139bb27a0c83adf88d19 ]

Fix linker error if FB=m about missing fb_io_read and fb_io_write. The
linker's error message suggests that this config setting has already
been broken for other symbols.

  All errors (new ones prefixed by >>):

     sh4-linux-ld: drivers/video/fbdev/sh7760fb.o: in function `sh7760fb_probe':
     sh7760fb.c:(.text+0x374): undefined reference to `framebuffer_alloc'
     sh4-linux-ld: sh7760fb.c:(.text+0x394): undefined reference to `fb_videomode_to_var'
     sh4-linux-ld: sh7760fb.c:(.text+0x39c): undefined reference to `fb_alloc_cmap'
     sh4-linux-ld: sh7760fb.c:(.text+0x3a4): undefined reference to `register_framebuffer'
     sh4-linux-ld: sh7760fb.c:(.text+0x3ac): undefined reference to `fb_dealloc_cmap'
     sh4-linux-ld: sh7760fb.c:(.text+0x434): undefined reference to `framebuffer_release'
     sh4-linux-ld: drivers/video/fbdev/sh7760fb.o: in function `sh7760fb_remove':
     sh7760fb.c:(.text+0x800): undefined reference to `unregister_framebuffer'
     sh4-linux-ld: sh7760fb.c:(.text+0x804): undefined reference to `fb_dealloc_cmap'
     sh4-linux-ld: sh7760fb.c:(.text+0x814): undefined reference to `framebuffer_release'
  >> sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0xc): undefined reference to `fb_io_read'
  >> sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x10): undefined reference to `fb_io_write'
     sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x2c): undefined reference to `cfb_fillrect'
     sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x30): undefined reference to `cfb_copyarea'
     sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x34): undefined reference to `cfb_imageblit'

Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309130632.LS04CPWu-lkp@intel.com/
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230918090400.13264-1-tzimmermann@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

LoongArch: Set all reserved memblocks on Node#0 at initialization

[ Upstream commit b795fb9f5861ee256070d59e33130980a01fadd7 ]

After commit 61167ad5fecdea ("mm: pass nid to reserve_bootmem_region()")
we get a panic if DEFERRED_STRUCT_PAGE_INIT is enabled:

[    0.000000] CPU 0 Unable to handle kernel paging request at virtual address 0000000000002b82, era == 90000000040e3f28, ra == 90000000040e3f18
[    0.000000] Oops[#1]:
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0+ #733
[    0.000000] pc 90000000040e3f28 ra 90000000040e3f18 tp 90000000046f4000 sp 90000000046f7c90
[    0.000000] a0 0000000000000001 a1 0000000000200000 a2 0000000000000040 a3 90000000046f7ca0
[    0.000000] a4 90000000046f7ca4 a5 0000000000000000 a6 90000000046f7c38 a7 0000000000000000
[    0.000000] t0 0000000000000002 t1 9000000004b00ac8 t2 90000000040e3f18 t3 90000000040f0800
[    0.000000] t4 00000000000f0000 t5 80000000ffffe07e t6 0000000000000003 t7 900000047fff5e20
[    0.000000] t8 aaaaaaaaaaaaaaab u0 0000000000000018 s9 0000000000000000 s0 fffffefffe000000
[    0.000000] s1 0000000000000000 s2 0000000000000080 s3 0000000000000040 s4 0000000000000000
[    0.000000] s5 0000000000000000 s6 fffffefffe000000 s7 900000000470b740 s8 9000000004ad4000
[    0.000000]    ra: 90000000040e3f18 reserve_bootmem_region+0xec/0x21c
[    0.000000]   ERA: 90000000040e3f28 reserve_bootmem_region+0xfc/0x21c
[    0.000000]  CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
[    0.000000]  PRMD: 00000000 (PPLV0 -PIE -PWE)
[    0.000000]  EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
[    0.000000]  ECFG: 00070800 (LIE=11 VS=7)
[    0.000000] ESTAT: 00010800 [PIL] (IS=11 ECode=1 EsubCode=0)
[    0.000000]  BADV: 0000000000002b82
[    0.000000]  PRID: 0014d000 (Loongson-64bit, Loongson-3A6000)
[    0.000000] Modules linked in:
[    0.000000] Process swapper (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____))
[    0.000000] Stack : 0000000000000000 9000000002eb5430 0000003a00000020 90000000045ccd00
[    0.000000]         900000000470e000 90000000002c1918 0000000000000000 9000000004110780
[    0.000000]         00000000fe6c0000 0000000480000000 9000000004b4e368 9000000004110748
[    0.000000]         0000000000000000 900000000421ca84 9000000004620000 9000000004564970
[    0.000000]         90000000046f7d78 9000000002cc9f70 90000000002c1918 900000000470e000
[    0.000000]         9000000004564970 90000000040bc0e0 90000000046f7d78 0000000000000000
[    0.000000]         0000000000004000 90000000045ccd00 0000000000000000 90000000002c1918
[    0.000000]         90000000002c1900 900000000470b700 9000000004b4df78 9000000004620000
[    0.000000]         90000000046200a8 90000000046200a8 0000000000000000 9000000004218b2c
[    0.000000]         9000000004270008 0000000000000001 0000000000000000 90000000045ccd00
[    0.000000]         ...
[    0.000000] Call Trace:
[    0.000000] [<90000000040e3f28>] reserve_bootmem_region+0xfc/0x21c
[    0.000000] [<900000000421ca84>] memblock_free_all+0x114/0x350
[    0.000000] [<9000000004218b2c>] mm_core_init+0x138/0x3cc
[    0.000000] [<9000000004200e38>] start_kernel+0x488/0x7a4
[    0.000000] [<90000000040df0d8>] kernel_entry+0xd8/0xdc
[    0.000000]
[    0.000000] Code: 02eb21ad  00410f4c  380c31ac <262b818d> 6800b70d  02c1c196  0015001c  57fe4bb1  260002cd

The reason is early memblock_reserve() in memblock_init() set node id to
MAX_NUMNODES, making NODE_DATA(nid) a NULL dereference in the call chain
reserve_bootmem_region() -> init_reserved_page(). After memblock_init(),
those late calls of memblock_reserve() operate on subregions of memblock
.memory regions. As a result, these reserved regions will be set to the
correct node at the first iteration of memmap_init_reserved_pages().

So set all reserved memblocks on Node#0 at initialization can avoid this
panic.

Reported-by: WANG Xuerui <git@xen0n.name>
Tested-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: WANG Xuerui <git@xen0n.name> # with nits addressed
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tsnep: Fix NAPI polling with budget 0

[ Upstream commit 46589db3817bd8b523701274885984b5a5dda7d1 ]

According to the NAPI documentation networking/napi.rst, Rx specific
APIs like page pool and XDP cannot be used at all when budget is 0.
skb Tx processing should happen regardless of the budget.

Stop NAPI polling after Tx processing and skip Rx processing if budget
is 0.

Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tsnep: Fix NAPI scheduling

[ Upstream commit ea852c17f5382a0a52041cfbd9a4451ae0fa1a38 ]

According to the NAPI documentation networking/napi.rst, drivers which
have to mask interrupts explicitly should use the napi_schedule_prep()
and __napi_schedule() calls.

No problem seen so far with current implementation. Nevertheless, let's
align the implementation with documentation.

Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hsr: Add __packed to struct hsr_sup_tlv.

[ Upstream commit fbd825fcd7dd4c11d4c48c3d0adc248a4a0ce90b ]

Struct hsr_sup_tlv describes HW layout and therefore it needs a __packed
attribute to ensure the compiler does not add any padding.
Due to the size and __packed attribute of the structs that use
hsr_sup_tlv it has no functional impact.

Add __packed to struct hsr_sup_tlv.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ncsi: Propagate carrier gain/loss events to the NCSI controller

[ Upstream commit 3780bb29311eccb7a1c9641032a112eed237f7e3 ]

Report the carrier/no-carrier state for the network interface
shared between the BMC and the passthrough channel. Without this
functionality the BMC is unable to reconfigure the NIC in the event
of a re-cabling to a different subnet.

Signed-off-by: Johnathan Mantey <johnathanx.mantey@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/watchpoints: Annotate atomic context in more places

[ Upstream commit 27646b2e02b096a6936b3e3b6ba334ae20763eab ]

It can be easy to miss that the notifier mechanism invokes the callbacks
in an atomic context, so add some comments to that effect on the two
handlers we register here.

Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230829063457.54157-4-bgray@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/watchpoint: Disable pagefaults when getting user instruction

[ Upstream commit 3241f260eb830d27d09cc604690ec24533fdb433 ]

This is called in an atomic context, so is not allowed to sleep if a
user page needs to be faulted in and has nowhere it can be deferred to.
The pagefault_disabled() function is documented as preventing user
access methods from sleeping.

In practice the page will be mapped in nearly always because we are
reading the instruction that just triggered the watchpoint trap.

Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230829063457.54157-3-bgray@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/watchpoints: Disable preemption in thread_change_pc()

[ Upstream commit cc879ab3ce39bc39f9b1d238b283f43a5f6f957d ]

thread_change_pc() uses CPU local data, so must be protected from
swapping CPUs while it is reading the breakpoint struct.

The error is more noticeable after 1e60f3564bad ("powerpc/watchpoints:
Track perf single step directly on the breakpoint"), which added an
unconditional __this_cpu_read() call in thread_change_pc(). However the
existing __this_cpu_read() that runs if a breakpoint does need to be
re-inserted has the same issue.

Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230829063457.54157-2-bgray@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: Intel: MTL: Reduce the DSP init timeout

[ Upstream commit e0f96246c4402514acda040be19ee24c1619e01a ]

20s seems unnecessarily large for the DSP init timeout. This coupled with
multiple FW boot attempts causes an excessive delay in the error path when
booting in recovery mode. Reduce it to 0.5s and use the existing
HDA_DSP_INIT_TIMEOUT_US.

Link: https://github.com/thesofproject/linux/issues/4565
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230915134153.9688-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.1: fix zero value filehandle in post open getattr

[ Upstream commit 4506f23e117161a20104c8fa04f33e1ca63c26af ]

Currently, if the OPEN compound experiencing an error and needs to
get the file attributes separately, it will send a stand alone
GETATTR but it would use the filehandle from the results of
the OPEN compound. In case of the CLAIM_FH OPEN, nfs_openres's fh
is zero value. That generate a GETATTR that's sent with a zero
value filehandle, and results in the server returning an error.

Instead, for the CLAIM_FH OPEN, take the filehandle that was used
in the PUTFH of the OPEN compound.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: vb2: frame_vector.c: replace WARN_ONCE with a comment

[ Upstream commit 735de5caf79e06cc9fb96b1b4f4974674ae3e917 ]

The WARN_ONCE was issued also in cases that had nothing to do with VM_IO
(e.g. if the start address was just a random value and uaccess fails with
-EFAULT).

There are no reports of WARN_ONCE being issued for actual VM_IO cases, so
just drop it and instead add a note to the comment before the function.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reported-by: Yikebaer Aizezi <yikebaer61@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: imx-rpmsg: Set ignore_pmdown_time for dai_link

[ Upstream commit fac58baf8fcfcd7481e8f6d60206ce2a47c1476c ]

i.MX rpmsg sound cards work on codec slave mode. MCLK will be disabled
by CPU DAI driver in hw_free(). Some codec requires MCLK present at
power up/down sequence. So need to set ignore_pmdown_time to power down
codec immediately before MCLK is turned off.

Take WM8962 as an example, if MCLK is disabled before DAPM power down
playback stream, FIFO error will arise in WM8962 which will have bad
impact on playback next.

Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20230913102656.2966757-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

memblock tests: fix warning ‘struct seq_file’ declared inside parameter list

[ Upstream commit 55122e0130e51eb71f5ec62d10525db0468f28e8 ]

Building memblock tests produces the following warning:

cc -I. -I../../include -Wall -O2 -fsanitize=address -fsanitize=undefined -D CONFIG_PHYS_ADDR_T_64BIT   -c -o main.o main.c
In file included from tests/common.h:9,
                 from tests/basic_api.h:5,
                 from main.c:2:
./linux/memblock.h:601:50: warning: ‘struct seq_file’ declared inside parameter list will not be visible outside of this definition or declaration
  601 | static inline void memtest_report_meminfo(struct seq_file *m) { }
      |                                                  ^~~~~~~~

Add declaration of 'struct seq_file' to tools/include/linux/seq_file.h
to fix it.

Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

memblock tests: fix warning: "__ALIGN_KERNEL" redefined

[ Upstream commit 5e1bffbdb63baf89f3bf0b6bafb50903432a7434 ]

Building memblock tests produces the following warning:

cc -I. -I../../include -Wall -O2 -fsanitize=address -fsanitize=undefined -D CONFIG_PHYS_ADDR_T_64BIT   -c -o main.o main.c
In file included from ../../include/linux/pfn.h:5,
                 from ./linux/memory_hotplug.h:6,
                 from ./linux/init.h:7,
                 from ./linux/memblock.h:11,
                 from tests/common.h:8,
                 from tests/basic_api.h:5,
                 from main.c:2:
../../include/linux/mm.h:14: warning: "__ALIGN_KERNEL" redefined
   14 | #define __ALIGN_KERNEL(x, a)            __ALIGN_KERNEL_MASK(x, (typeof(x))(a) - 1)
      |
In file included from ../../include/linux/mm.h:6,
                 from ../../include/linux/pfn.h:5,
                 from ./linux/memory_hotplug.h:6,
                 from ./linux/init.h:7,
                 from ./linux/memblock.h:11,
                 from tests/common.h:8,
                 from tests/basic_api.h:5,
                 from main.c:2:
../../include/uapi/linux/const.h:31: note: this is the location of the previous definition
   31 | #define __ALIGN_KERNEL(x, a)            __ALIGN_KERNEL_MASK(x, (__typeof__(x))(a) - 1)
      |

Remove definitions of __ALIGN_KERNEL and __ALIGN_KERNEL_MASK from
tools/include/linux/mm.h to fix it.

Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: cirrus: cs_dsp: Only log list of algorithms in debug build

[ Upstream commit 69343ce91435f222052015c5af86b550391bac85 ]

Change the logging of each algorithm from info level to debug level.

On the original devices supported by this code there were typically only
one or two algorithms in a firmware and one or two DSPs so this logging
only used a small number of log lines.

However, for the latest devices there could be 30-40 algorithms in a
firmware and 8 DSPs being loaded in parallel, so using 300+ lines of log
for information that isn't particularly important to have logged.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230913160523.3701189-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: cs42l42: Don't rely on GPIOD_OUT_LOW to set RESET initially low

[ Upstream commit a479b44ac0a0ac25cd48e5356200078924d78022 ]

The ACPI setting for a GPIO default state has higher priority than the
flag passed to devm_gpiod_get_optional() so ACPI can override the
GPIOD_OUT_LOW. Explicitly set the GPIO low when hard resetting.

Although GPIOD_OUT_LOW can't be relied on this doesn't seem like a
reason to stop passing it to devm_gpiod_get_optional(). So we still pass
it to state our intent, but can deal with it having no effect.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230913150012.604775-3-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: cs42l42: Ensure a reset pulse meets minimum pulse width.

[ Upstream commit 41dac81b56c82c51a6d00fda5f3af7691ffee2d7 ]

The CS42L42 can accept very short reset pulses of a few microseconds
but there's no reason to force a very short pulse.
Allow a wide range for the usleep_range() so it can be relaxed about
the choice of timing source.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230913150012.604775-2-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda: intel-sdw-acpi: Use u8 type for link index

[ Upstream commit 485ddd519fbd89a9d9ac4b02be489e03cbbeebba ]

Use consistently u8 for sdw link index. The id is limited to 4, u8 is
adequate in size to store it.

This change will also fixes the following compiler warning/error (W=1):

sound/hda/intel-sdw-acpi.c: In function ‘sdw_intel_acpi_scan’:
sound/hda/intel-sdw-acpi.c:34:35: error: ‘-subproperties’ directive output may be truncated writing 14 bytes into a region of size between 7 and 17 [-Werror=format-truncation=]
   34 |                  "mipi-sdw-link-%d-subproperties", i);
      |                                   ^~~~~~~~~~~~~~
In function ‘is_link_enabled’,
    inlined from ‘sdw_intel_scan_controller’ at sound/hda/intel-sdw-acpi.c:106:8,
    inlined from ‘sdw_intel_acpi_scan’ at sound/hda/intel-sdw-acpi.c:180:9:
sound/hda/intel-sdw-acpi.c:33:9: note: ‘snprintf’ output between 30 and 40 bytes into a destination of size 32
   33 |         snprintf(name, sizeof(name),
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
   34 |                  "mipi-sdw-link-%d-subproperties", i);
      |                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors

The warnings got brought to light by a recent patch upstream:
commit 6d4ab2e97dcf ("extrawarn: enable format and stringop overflow warnings in W=1")

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230912162617.29178-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Clarify error expectations from bpf_clone_redirect

[ Upstream commit 7cb779a6867fea00b4209bcf6de2f178a743247d ]

Commit 151e887d8ff9 ("veth: Fixing transmit return status for dropped
packets") exposed the fact that bpf_clone_redirect is capable of
returning raw NET_XMIT_XXX return codes.

This is in the conflict with its UAPI doc which says the following:
"0 on success, or a negative error in case of failure."

Update the UAPI to reflect the fact that bpf_clone_redirect can
return positive error numbers, but don't explicitly define
their meaning.

Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230911194731.286342-1-sdf@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: intel-pci: Add support for Granite Rapids SPI serial flash

[ Upstream commit 9855d60cfc720ff32355484c119acafd3c4dc806 ]

Intel Granite Rapids has a flash controller that is compatible with the
other Cannon Lake derivatives. Add Granite Rapids PCI ID to the driver
list of supported devices.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20230911074616.3473347-1-mika.westerberg@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: fsl: imx-pcm-rpmsg: Add SNDRV_PCM_INFO_BATCH flag

[ Upstream commit 2f9426905a63be7ccf8cd10109caf1848aa0993a ]

The rpmsg pcm device is a device which should support
double buffering.

Found this issue with pipewire. When there is no
SNDRV_PCM_INFO_BATCH flag in driver, the pipewire will
set headroom to be zero, and because rpmsg pcm device
don't support residue report, when the latency setting
is small, the "delay" always larger than "target" in
alsa-pcm.c, that reading next period data is not
scheduled on time.

With SNDRV_PCM_INFO_BATCH flag in driver, the pipewire
will select a smaller period size for device, then
the task of reading next period data will be scheduled
on time.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1694414287-13291-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: stm32: add a delay before SPI disable

[ Upstream commit 6de8a70c84ee0586fdde4e671626b9caca6aed74 ]

As explained in errata sheet, in section "2.14.5 Truncation of SPI output
signals after EOT event":
On STM32MP1x, EOT interrupt can be thrown before the true end of
communication.

So we add a delay of a half period to wait the real end of the
transmission.

Link: https://www.st.com/resource/en/errata_sheet/es0539-stm32mp131x3x5x-device-errata-stmicroelectronics.pdf
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20230906132735.748174-1-valentin.caron@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: nxp-fspi: reset the FLSHxCR1 registers

[ Upstream commit 18495676f7886e105133f1dc06c1d5e8d5436f32 ]

Reset the FLSHxCR1 registers to default value. ROM may set the register
value and it affects the SPI NAND normal functions.

Signed-off-by: Han Xu <han.xu@nxp.com>
Link: https://lore.kernel.org/r/20230906183254.235847-1-han.xu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ata: libata-eh: do not clear ATA_PFLAG_EH_PENDING in ata_eh_reset()

[ Upstream commit 80cc944eca4f0baa9c381d0706f3160e491437f2 ]

ata_scsi_port_error_handler() starts off by clearing ATA_PFLAG_EH_PENDING,
before calling ap->ops->error_handler() (without holding the ap->lock).

If an error IRQ is received while ap->ops->error_handler() is running,
the irq handler will set ATA_PFLAG_EH_PENDING.

Once ap->ops->error_handler() returns, ata_scsi_port_error_handler()
checks if ATA_PFLAG_EH_PENDING is set, and if it is, another iteration
of ATA EH is performed.

The problem is that ATA_PFLAG_EH_PENDING is not only cleared by
ata_scsi_port_error_handler(), it is also cleared by ata_eh_reset().

ata_eh_reset() is called by ap->ops->error_handler(). This additional
clearing done by ata_eh_reset() breaks the whole retry logic in
ata_scsi_port_error_handler(). Thus, if an error IRQ is received while
ap->ops->error_handler() is running, the port will currently remain
frozen and will never get re-enabled.

The additional clearing in ata_eh_reset() was introduced in commit
1e641060c4b5 ("libata: clear eh_info on reset completion").

Looking at the original error report:
https://marc.info/?l=linux-ide&m=124765325828495&w=2

We can see the following happening:
[    1.074659] ata3: XXX port freeze
[    1.074700] ata3: XXX hardresetting link, stopping engine
[    1.074746] ata3: XXX flipping SControl

[    1.411471] ata3: XXX irq_stat=400040 CONN|PHY
[    1.411475] ata3: XXX port freeze

[    1.420049] ata3: XXX starting engine
[    1.420096] ata3: XXX rc=0, class=1
[    1.420142] ata3: XXX clearing IRQs for thawing
[    1.420188] ata3: XXX port thawed
[    1.420234] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

We are not supposed to be able to receive an error IRQ while the port is
frozen (PxIE is set to 0, i.e. all IRQs for the port are disabled).

AHCI 1.3.1 section 10.7.1.1 First Tier (IS Register) states:
"Each bit location can be thought of as reporting a '1' if the virtual
"interrupt line" for that port is indicating it wishes to generate an
interrupt. That is, if a port has one or more interrupt status bit set,
and the enables for those status bits are set, then this bit shall be set."

Additionally, AHCI state P:ComInit clearly shows that the state machine
will only jump to P:ComInitSetIS (which sets IS.IPS(x) to '1'), if PxIE.PCE
is set to '1'. In our case, PxIE is set to 0, so IS.IPS(x) won't get set.

So IS.IPS(x) only gets set if PxIS and PxIE is set.

AHCI 1.3.1 section 10.7.1.1 First Tier (IS Register) also states:
"The bits in this register are read/write clear. It is set by the level of
the virtual interrupt line being a set, and cleared by a write of '1' from
the software."

So if IS.IPS(x) is set, you need to explicitly clear it by writing a 1 to
IS.IPS(x) for that port.

Since PxIE is cleared, the only way to get an interrupt while the port is
frozen, is if IS.IPS(x) is set, and the only way IS.IPS(x) can be set when
the port is frozen, is if it was set before the port was frozen.

However, since commit 737dd811a3db ("ata: libahci: clear pending interrupt
status"), we clear both PxIS and IS.IPS(x) after freezing the port, but
before the COMRESET, so the problem that commit 1e641060c4b5 ("libata:
clear eh_info on reset completion") fixed can no longer happen.

Thus, revert commit 1e641060c4b5 ("libata: clear eh_info on reset
completion"), so that the retry logic in ata_scsi_port_error_handler()
works once again. (The retry logic is still needed, since we can still
get an error IRQ _after_ the port has been thawed, but before
ata_scsi_port_error_handler() takes the ap->lock in order to check
if ATA_PFLAG_EH_PENDING is set.)

Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

smb3: correct places where ENOTSUPP is used instead of preferred EOPNOTSUPP

[ Upstream commit ebc3d4e44a7e05457825e03d0560153687265523 ]

checkpatch flagged a few places with:
     WARNING: ENOTSUPP is not a SUSV4 error code, prefer EOPNOTSUPP
Also fixed minor typo

Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: pm80xx: Avoid leaking tags when processing OPC_INB_SET_CONTROLLER_CONFIG command

[ Upstream commit c13e7331745852d0dd7c35eabbe181cbd5b01172 ]

Tags allocated for OPC_INB_SET_CONTROLLER_CONFIG command need to be freed
when we receive the response.

Signed-off-by: Michal Grzedzicki <mge@meta.com>
Link: https://lore.kernel.org/r/20230911170340.699533-2-mge@meta.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: pm80xx: Use phy-specific SAS address when sending PHY_START command

[ Upstream commit 71996bb835aed58c7ec4967be1d05190a27339ec ]

Some cards have more than one SAS address. Using an incorrect address
causes communication issues with some devices like expanders.

Closes: https://lore.kernel.org/linux-kernel/A57AEA84-5CA0-403E-8053-106033C73C70@fb.com/
Signed-off-by: Michal Grzedzicki <mge@meta.com>
Link: https://lore.kernel.org/r/20230913155611.3183612-1-mge@meta.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: errata: fix T-Head dcache.cva encoding

[ Upstream commit 8eb8fe67e2c84324398f5983c41b4f831d0705b3 ]

The dcache.cva encoding shown in the comments are wrong, it's for
dcache.cval1 (which is restricted to L1) instead.

Fix this in the comment and in the hardcoded instruction.

Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Tested-by: Sergey Matyukevich <sergey.matyukevich@syntacore.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Guo Ren <guoren@kernel.org>
Tested-by: Drew Fustini <dfustini@baylibre.com>
Link: https://lore.kernel.org/r/20230912072410.2481-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Handle null atom context in VBIOS info ioctl

[ Upstream commit 5e7e82254270c8cf8b107451c5de01cee2f135ae ]

On some APU systems, there is no atom context and so the
atom_context struct is null.

Add a check to the VBIOS_INFO branch of amdgpu_info_ioctl
to handle this case, returning all zeroes.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu/nbio4.3: set proper rmmio_remap.reg_offset for SR-IOV

[ Upstream commit ab43213e7afd08ac68d4282060bacf309e70fd14 ]

Needed for HDP flush to work correctly.

Reviewed-by: Timmy Tsai <timmtsai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu/soc21: don't remap HDP registers for SR-IOV

[ Upstream commit 1832403cd41ca6b19b24e9d64f79cb08d920ca44 ]

This matches the behavior for soc15 and nv.

Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Timmy Tsai <timmtsai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Don't check registers, if using AUX BL control

[ Upstream commit f5b2c10b57615828b531bb0ae56bd6325a41167e ]

[Why]
Currently the driver looks DCN registers to access if BL is on or not.
This check is not valid if we are using AUX based brightness control.
This causes driver to not send out "backlight off" command during power off
sequence as it already thinks it is off.

[How]
Only check DCN registers if we aren't using AUX based brightness control.

Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Swapnil Patel <swapnil.patel@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal/of: add missing of_node_put()

[ Upstream commit 8a81cf96f5510aaf9a65d103f7405079a7b0fcc5 ]

for_each_child_of_node performs an of_node_get on each
iteration, so a break out of the loop requires an
of_node_put.

This was done using the Coccinelle semantic patch
iterators/for_each_child.cocci

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: asus-wmi: Support 2023 ROG X16 tablet mode

[ Upstream commit 4106a70ddad57ee6d8f98b81d6f036740c72762b ]

Add quirk for ASUS ROG X16 (GV601V, 2023 versions) Flow 2-in-1
to enable tablet mode with lid flip (all screen rotations).

Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230905082813.13470-1-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/mellanox: mlxbf-bootctl: add NET dependency into Kconfig

[ Upstream commit c2dffda1d8f7511505bbbf16ba282f2079b30089 ]

The latest version of the mlxbf_bootctl driver utilizes
"sysfs_format_mac", and this API is only available if
NET is defined in the kernel configuration. This patch
changes the mlxbf_bootctl Kconfig to depend on NET.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309031058.JvwNDBKt-lkp@intel.com/
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20230905133243.31550-1-davthompson@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ata: sata_mv: Fix incorrect string length computation in mv_dump_mem()

[ Upstream commit e97eb65dd464e7f118a16a26337322d07eb653e2 ]

snprintf() returns the "number of characters which *would* be generated for
the given input", not the size *really* generated.

In order to avoid too large values for 'o' (and potential negative values
for "sizeof(linebuf) o") use scnprintf() instead of snprintf().

Note that given the "w < 4" in the for loop, the buffer can NOT
overflow, but using the *right* function is always better.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/smc: bugfix for smcr v2 server connect success statistic

[ Upstream commit 6912e724832c47bb381eb1bd1e483ec8df0d0f0f ]

In the macro SMC_STAT_SERV_SUCC_INC, the smcd_version is used
to determin whether to increase the v1 statistic or the v2
statistic. It is correct for SMCD. But for SMCR, smcr_version
should be used.

Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ring-buffer: Do not attempt to read past "commit"

[ Upstream commit 95a404bd60af6c4d9d8db01ad14fe8957ece31ca ]

When iterating over the ring buffer while the ring buffer is active, the
writer can corrupt the reader. There's barriers to help detect this and
handle it, but that code missed the case where the last event was at the
very end of the page and has only 4 bytes left.

The checks to detect the corruption by the writer to reads needs to see the
length of the event. If the length in the first 4 bytes is zero then the
length is stored in the second 4 bytes. But if the writer is in the process
of updating that code, there's a small window where the length in the first
4 bytes could be zero even though the length is only 4 bytes. That will
cause rb_event_length() to read the next 4 bytes which could happen to be off the
allocated page.

To protect against this, fail immediately if the next event pointer is
less than 8 bytes from the end of the commit (last byte of data), as all
events must be a minimum of 8 bytes anyway.

Link: https://lore.kernel.org/all/20230905141245.26470-1-Tze-nan.Wu@mediatek.com/
Link: https://lore.kernel.org/linux-trace-kernel/20230907122820.0899019c@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Reported-by: Tze-nan Wu <Tze-nan.Wu@mediatek.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: fix dependency checker script

[ Upstream commit 5f9dd2e896a91bfca90f8463eb6808c03d535d8a ]

This patch fixes inconsistencies in the parsing rules of the levels 1
and 2 of the kselftest_deps.sh.  It was added the levels 4 and 5 to
account for a few edge cases that are present in some tests, also some
minor identation styling have been fixed (s/    /\t/g).

Signed-off-by: Ricardo B. Marliere <rbmarliere@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: assert delayed node locked when removing delayed item

[ Upstream commit a57c2d4e46f519b24558ae0752c17eec416ac72a ]

When removing a delayed item, or releasing which will remove it as well,
we will modify one of the delayed node's rbtrees and item counter if the
delayed item is in one of the rbtrees. This require having the delayed
node's mutex locked, otherwise we will race with other tasks modifying
the rbtrees and the counter.

This is motivated by a previous version of another patch actually calling
btrfs_release_delayed_item() after unlocking the delayed node's mutex and
against a delayed item that is in a rbtree.

So assert at __btrfs_remove_delayed_item() that the delayed node's mutex
is locked.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ring-buffer: Avoid softlockup in ring_buffer_resize()

[ Upstream commit f6bd2c92488c30ef53b5bd80c52f0a7eee9d545a ]

When user resize all trace ring buffer through file 'buffer_size_kb',
then in ring_buffer_resize(), kernel allocates buffer pages for each
cpu in a loop.

If the kernel preemption model is PREEMPT_NONE and there are many cpus
and there are many buffer pages to be allocated, it may not give up cpu
for a long time and finally cause a softlockup.

To avoid it, call cond_resched() after each cpu buffer allocation.

Link: https://lore.kernel.org/linux-trace-kernel/20230906081930.3939106-1-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/ftrace: Correctly enable event in instance-event.tc

[ Upstream commit f4e4ada586995b17f828c6d147d1800eb1471450 ]

Function instance_set() expects to enable event 'sched_switch', so we
should set 1 to its 'enable' file.

Testcase passed after this patch:
  # ./ftracetest test.d/instances/instance-event.tc
  === Ftrace unit tests ===
  [1] Test creation and deletion of trace instances while setting an event
  [PASS]

  # of passed:  1
  # of failed:  0
  # of unresolved:  0
  # of untested:  0
  # of unsupported:  0
  # of xfailed:  0
  # of undefined(test bug):  0

Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: core: Poll HCS.UCRDY before issuing a UIC command

[ Upstream commit d32533d30e2119b0c0aa17596734f1f842f750df ]

With auto hibern8 enabled, UIC could be busy processing a hibern8 operation
and the HCI would reports UIC not ready for a short while through
HCS.UCRDY. The UFS driver doesn't currently handle this situation. The
UFSHCI spec specifies UCRDY like this: whether the host controller is ready
to process UIC COMMAND

The 'ready' could be seen as many different meanings. If the meaning
includes not processing any request from HCI, processing a hibern8
operation can be 'not ready'. In this situation, the driver needs to wait
until the operations is completed.

Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Link: https://lore.kernel.org/r/550484ffb66300bdcec63d3e304dfd55cb432f1f.1693790060.git.kwmad.kim@samsung.com
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Chanwoo Lee <cw9316.lee@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: core: Move __ufshcd_send_uic_cmd() outside host_lock

[ Upstream commit 2d3f59cf868b4a2dd678a96cd49bdd91411bd59f ]

__ufshcd_send_uic_cmd() is wrapped by uic_cmd_mutex and its related
contexts are accessed within the section wrapped by uic_cmd_mutex. Thus,
wrapping with host_lock is redundant.

Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Link: https://lore.kernel.org/r/782ba5f26f0a96e58d85dff50751787d2d2a6b2b.1693790060.git.kwmad.kim@samsung.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chanwoo Lee <cw9316.lee@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qedf: Add synchronization between I/O completions and abort

[ Upstream commit 7df0b2605489bef3f4223ad66f1f9bb8d50d4cd2 ]

Avoid race condition between I/O completion and abort processing by
protecting the cmd_type with the rport lock.

Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Link: https://lore.kernel.org/r/20230901060646.27885-1-skashyap@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

parisc: irq: Make irq_stack_union static to avoid sparse warning

[ Upstream commit b1bef1388c427cdad7331a9c8eb4ebbbe5b954b0 ]

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

parisc: drivers: Fix sparse warning

[ Upstream commit b137b9d60b8add5620a06c687a71ce18776730b0 ]

Fix "warning: directive in macro's argument list" warning.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

parisc: iosapic.c: Fix sparse warnings

[ Upstream commit 927c6c8aa27c284a799b8c18784e37d3373af908 ]

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

parisc: sba: Fix compile warning wrt list of SBA devices

[ Upstream commit eb3255ee8f6f4691471a28fbf22db5e8901116cd ]

Fix this makecheck warning:
drivers/parisc/sba_iommu.c:98:19: warning: symbol 'sba_list'
was not declared. Should it be static?

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-fc: Prevent null pointer dereference in nvme_fc_io_getuuid()

[ Upstream commit 8ae5b3a685dc59a8cf7ccfe0e850999ba9727a3c ]

The nvme_fc_fcp_op structure describing an AEN operation is initialized with a
null request structure pointer. An FC LLDD may make a call to
nvme_fc_io_getuuid passing a pointer to an nvmefc_fcp_req for an AEN operation.

Add validation of the request structure pointer before dereference.

Signed-off-by: Nigel Kirkland <nkirkland2304@gmail.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: sun6i: fix race between DMA RX transfer completion and RX FIFO drain

[ Upstream commit 1f11f4202caf5710204d334fe63392052783876d ]

Previously the transfer complete IRQ immediately drained to RX FIFO to
read any data remaining in FIFO to the RX buffer. This behaviour is
correct when dealing with SPI in interrupt mode. However in DMA mode the
transfer complete interrupt still fires as soon as all bytes to be
transferred have been stored in the FIFO. At that point data in the FIFO
still needs to be picked up by the DMA engine. Thus the drain procedure
and DMA engine end up racing to read from RX FIFO, corrupting any data
read. Additionally the RX buffer pointer is never adjusted according to
DMA progress in DMA mode, thus calling the RX FIFO drain procedure in DMA
mode is a bug.
Fix corruptions in DMA RX mode by draining RX FIFO only in interrupt mode.
Also wait for completion of RX DMA when in DMA mode before returning to
ensure all data has been copied to the supplied memory buffer.

Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Link: https://lore.kernel.org/r/20230827152558.5368-3-t.schramm@manjaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: sun6i: reduce DMA RX transfer width to single byte

[ Upstream commit 171f8a49f212e87a8b04087568e1b3d132e36a18 ]

Through empirical testing it has been determined that sometimes RX SPI
transfers with DMA enabled return corrupted data. This is down to single
or even multiple bytes lost during DMA transfer from SPI peripheral to
memory. It seems the RX FIFO within the SPI peripheral can become
confused when performing bus read accesses wider than a single byte to it
during an active SPI transfer.

This patch reduces the width of individual DMA read accesses to the
RX FIFO to a single byte to mitigate that issue.

Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Link: https://lore.kernel.org/r/20230827152558.5368-2-t.schramm@manjaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Annotate bpf_long_memcpy with data_race

[ Upstream commit 6a86b5b5cd76d2734304a0173f5f01aa8aa2025e ]

syzbot reported a data race splat between two processes trying to
update the same BPF map value via syscall on different CPUs:

  BUG: KCSAN: data-race in bpf_percpu_array_update / bpf_percpu_array_update

  write to 0xffffe8fffe7425d8 of 8 bytes by task 8257 on cpu 1:
   bpf_long_memcpy include/linux/bpf.h:428 [inline]
   bpf_obj_memcpy include/linux/bpf.h:441 [inline]
   copy_map_value_long include/linux/bpf.h:464 [inline]
   bpf_percpu_array_update+0x3bb/0x500 kernel/bpf/arraymap.c:380
   bpf_map_update_value+0x190/0x370 kernel/bpf/syscall.c:175
   generic_map_update_batch+0x3ae/0x4f0 kernel/bpf/syscall.c:1749
   bpf_map_do_batch+0x2df/0x3d0 kernel/bpf/syscall.c:4648
   __sys_bpf+0x28a/0x780
   __do_sys_bpf kernel/bpf/syscall.c:5241 [inline]
   __se_sys_bpf kernel/bpf/syscall.c:5239 [inline]
   __x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5239
   do_syscall_x64 arch/x86/entry/common.c:50 [inline]
   do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
   entry_SYSCALL_64_after_hwframe+0x63/0xcd

  write to 0xffffe8fffe7425d8 of 8 bytes by task 8268 on cpu 0:
   bpf_long_memcpy include/linux/bpf.h:428 [inline]
   bpf_obj_memcpy include/linux/bpf.h:441 [inline]
   copy_map_value_long include/linux/bpf.h:464 [inline]
   bpf_percpu_array_update+0x3bb/0x500 kernel/bpf/arraymap.c:380
   bpf_map_update_value+0x190/0x370 kernel/bpf/syscall.c:175
   generic_map_update_batch+0x3ae/0x4f0 kernel/bpf/syscall.c:1749
   bpf_map_do_batch+0x2df/0x3d0 kernel/bpf/syscall.c:4648
   __sys_bpf+0x28a/0x780
   __do_sys_bpf kernel/bpf/syscall.c:5241 [inline]
   __se_sys_bpf kernel/bpf/syscall.c:5239 [inline]
   __x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5239
   do_syscall_x64 arch/x86/entry/common.c:50 [inline]
   do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
   entry_SYSCALL_64_after_hwframe+0x63/0xcd

  value changed: 0x0000000000000000 -> 0xfffffff000002788

The bpf_long_memcpy is used with 8-byte aligned pointers, power-of-8 size
and forced to use long read/writes to try to atomically copy long counters.
It is best-effort only and no barriers are here since it _will_ race with
concurrent updates from BPF programs. The bpf_long_memcpy() is called from
bpf(2) syscall. Marco suggested that the best way to make this known to
KCSAN would be to use data_race() annotation.

Reported-by: syzbot+97522333291430dd277f@syzkaller.appspotmail.com
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/bpf/000000000000d87a7f06040c970c@google.com
Link: https://lore.kernel.org/bpf/57628f7a15e20d502247c3b55fceb1cb2b31f266.1693342186.git.daniel@iogearbox.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

dma-debug: don't call __dma_entry_alloc_check_leak() under free_entries_lock

[ Upstream commit fb5a4315591dae307a65fc246ca80b5159d296e1 ]

__dma_entry_alloc_check_leak() calls into printk -> serial console
output (qcom geni) and grabs port->lock under free_entries_lock
spin lock, which is a reverse locking dependency chain as qcom_geni
IRQ handler can call into dma-debug code and grab free_entries_lock
under port->lock.

Move __dma_entry_alloc_check_leak() call out of free_entries_lock
scope so that we don't acquire serial console's port->lock under it.

Trimmed-down lockdep splat:

 The existing dependency chain (in reverse order) is:

               -> #2 (free_entries_lock){-.-.}-{2:2}:
        _raw_spin_lock_irqsave+0x60/0x80
        dma_entry_alloc+0x38/0x110
        debug_dma_map_page+0x60/0xf8
        dma_map_page_attrs+0x1e0/0x230
        dma_map_single_attrs.constprop.0+0x6c/0xc8
        geni_se_rx_dma_prep+0x40/0xcc
        qcom_geni_serial_isr+0x310/0x510
        __handle_irq_event_percpu+0x110/0x244
        handle_irq_event_percpu+0x20/0x54
        handle_irq_event+0x50/0x88
        handle_fasteoi_irq+0xa4/0xcc
        handle_irq_desc+0x28/0x40
        generic_handle_domain_irq+0x24/0x30
        gic_handle_irq+0xc4/0x148
        do_interrupt_handler+0xa4/0xb0
        el1_interrupt+0x34/0x64
        el1h_64_irq_handler+0x18/0x24
        el1h_64_irq+0x64/0x68
        arch_local_irq_enable+0x4/0x8
        ____do_softirq+0x18/0x24
        ...

               -> #1 (&port_lock_key){-.-.}-{2:2}:
        _raw_spin_lock_irqsave+0x60/0x80
        qcom_geni_serial_console_write+0x184/0x1dc
        console_flush_all+0x344/0x454
        console_unlock+0x94/0xf0
        vprintk_emit+0x238/0x24c
        vprintk_default+0x3c/0x48
        vprintk+0xb4/0xbc
        _printk+0x68/0x90
        register_console+0x230/0x38c
        uart_add_one_port+0x338/0x494
        qcom_geni_serial_probe+0x390/0x424
        platform_probe+0x70/0xc0
        really_probe+0x148/0x280
        __driver_probe_device+0xfc/0x114
        driver_probe_device+0x44/0x100
        __device_attach_driver+0x64/0xdc
        bus_for_each_drv+0xb0/0xd8
        __device_attach+0xe4/0x140
        device_initial_probe+0x1c/0x28
        bus_probe_device+0x44/0xb0
        device_add+0x538/0x668
        of_device_add+0x44/0x50
        of_platform_device_create_pdata+0x94/0xc8
        of_platform_bus_create+0x270/0x304
        of_platform_populate+0xac/0xc4
        devm_of_platform_populate+0x60/0xac
        geni_se_probe+0x154/0x160
        platform_probe+0x70/0xc0
        ...

               -> #0 (console_owner){-...}-{0:0}:
        __lock_acquire+0xdf8/0x109c
        lock_acquire+0x234/0x284
        console_flush_all+0x330/0x454
        console_unlock+0x94/0xf0
        vprintk_emit+0x238/0x24c
        vprintk_default+0x3c/0x48
        vprintk+0xb4/0xbc
        _printk+0x68/0x90
        dma_entry_alloc+0xb4/0x110
        debug_dma_map_sg+0xdc/0x2f8
        __dma_map_sg_attrs+0xac/0xe4
        dma_map_sgtable+0x30/0x4c
        get_pages+0x1d4/0x1e4 [msm]
        msm_gem_pin_pages_locked+0x38/0xac [msm]
        msm_gem_pin_vma_locked+0x58/0x88 [msm]
        msm_ioctl_gem_submit+0xde4/0x13ac [msm]
        drm_ioctl_kernel+0xe0/0x15c
        drm_ioctl+0x2e8/0x3f4
        vfs_ioctl+0x30/0x50
        ...

 Chain exists of:
   console_owner --> &port_lock_key --> free_entries_lock

  Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(free_entries_lock);
                                lock(&port_lock_key);
                                lock(free_entries_lock);
   lock(console_owner);

                *** DEADLOCK ***

 Call trace:
  dump_backtrace+0xb4/0xf0
  show_stack+0x20/0x30
  dump_stack_lvl+0x60/0x84
  dump_stack+0x18/0x24
  print_circular_bug+0x1cc/0x234
  check_noncircular+0x78/0xac
  __lock_acquire+0xdf8/0x109c
  lock_acquire+0x234/0x284
  console_flush_all+0x330/0x454
  console_unlock+0x94/0xf0
  vprintk_emit+0x238/0x24c
  vprintk_default+0x3c/0x48
  vprintk+0xb4/0xbc
  _printk+0x68/0x90
  dma_entry_alloc+0xb4/0x110
  debug_dma_map_sg+0xdc/0x2f8
  __dma_map_sg_attrs+0xac/0xe4
  dma_map_sgtable+0x30/0x4c
  get_pages+0x1d4/0x1e4 [msm]
  msm_gem_pin_pages_locked+0x38/0xac [msm]
  msm_gem_pin_vma_locked+0x58/0x88 [msm]
  msm_ioctl_gem_submit+0xde4/0x13ac [msm]
  drm_ioctl_kernel+0xe0/0x15c
  drm_ioctl+0x2e8/0x3f4
  vfs_ioctl+0x30/0x50
  ...

Reported-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ceph: drop messages from MDS when unmounting

[ Upstream commit e3dfcab2080dc1f9a4b09cc1327361bc2845bfcd ]

When unmounting all the dirty buffers will be flushed and after
the last osd request is finished the last reference of the i_count
will be released. Then it will flush the dirty cap/snap to MDSs,
and the unmounting won't wait the possible acks, which will ihold
the inodes when updating the metadata locally but makes no sense
any more, of this. This will make the evict_inodes() to skip these
inodes.

If encrypt is enabled the kernel generate a warning when removing
the encrypt keys when the skipped inodes still hold the keyring:

WARNING: CPU: 4 PID: 168846 at fs/crypto/keyring.c:242 fscrypt_destroy_keyring+0x7e/0xd0
CPU: 4 PID: 168846 Comm: umount Tainted: G S  6.1.0-rc5-ceph-g72ead199864c #1
Hardware name: Supermicro SYS-5018R-WR/X10SRW-F, BIOS 2.0 12/17/2015
RIP: 0010:fscrypt_destroy_keyring+0x7e/0xd0
RSP: 0018:ffffc9000b277e28 EFLAGS: 00010202
RAX: 0000000000000002 RBX: ffff88810d52ac00 RCX: ffff88810b56aa00
RDX: 0000000080000000 RSI: ffffffff822f3a09 RDI: ffff888108f59000
RBP: ffff8881d394fb88 R08: 0000000000000028 R09: 0000000000000000
R10: 0000000000000001 R11: 11ff4fe6834fcd91 R12: ffff8881d394fc40
R13: ffff888108f59000 R14: ffff8881d394f800 R15: 0000000000000000
FS:  00007fd83f6f1080(0000) GS:ffff88885fd00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f918d417000 CR3: 000000017f89a005 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
generic_shutdown_super+0x47/0x120
kill_anon_super+0x14/0x30
ceph_kill_sb+0x36/0x90 [ceph]
deactivate_locked_super+0x29/0x60
cleanup_mnt+0xb8/0x140
task_work_run+0x67/0xb0
exit_to_user_mode_prepare+0x23d/0x240
syscall_exit_to_user_mode+0x25/0x60
do_syscall_64+0x40/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fd83dc39e9b

Later the kernel will crash when iput() the inodes and dereferencing
the "sb->s_master_keys", which has been released by the
generic_shutdown_super().

Link: https://tracker.ceph.com/issues/59162
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/reboot: VMCLEAR active VMCSes before emergency reboot

[ Upstream commit b23c83ad2c638420ec0608a9de354507c41bec29 ]

VMCLEAR active VMCSes before any emergency reboot, not just if the kernel
may kexec into a new kernel after a crash.  Per Intel's SDM, the VMX
architecture doesn't require the CPU to flush the VMCS cache on INIT.  If
an emergency reboot doesn't RESET CPUs, cached VMCSes could theoretically
be kept and only be written back to memory after the new kernel is booted,
i.e. could effectively corrupt memory after reboot.

Opportunistically remove the setting of the global pointer to NULL to make
checkpatch happy.

Cc: Andrew Cooper <Andrew.Cooper3@citrix.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: npcm7xx: Fix callback completion ordering

[ Upstream commit 92e73d807b68b2214fcafca4e130b5300a9d4b3c ]

Sometimes, our completions race with new master transfers and override
the bus->operation and bus->master_or_slave variables. This causes
transactions to timeout and kernel crashes less frequently.

To remedy this, we re-order all completions to the very end of the
function.

Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver")
Signed-off-by: William A. Kennington III <william@wkennington.com>
Reviewed-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: pmic-eic-sprd: Add can_sleep flag for PMIC EIC chip

[ Upstream commit 26d9e5640d2130ee16df7b1fb6a908f460ab004c ]

The drivers uses a mutex and I2C bus access in its PMIC EIC chip
get implementation. This means these functions can sleep and the PMIC EIC
chip should set the can_sleep property to true.

This will ensure that a warning is printed when trying to get the
value from a context that potentially can't sleep.

Fixes: 348f3cde84ab ("gpio: Add Spreadtrum PMIC EIC driver support")
Signed-off-by: Wenhua Lin <Wenhua.Lin@unisoc.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: arm_ffa: Don't set the memory region attributes for MEM_LEND

[ Upstream commit 9dda1178479aa0a73fe0eaabfe2d9a1c603cfeed ]

As per the FF-A specification: section "Usage of other memory region
attributes", in a transaction to donate memory or lend memory to a single
borrower, if the receiver is a PE or Proxy endpoint, the owner must not
specify the attributes and the relayer will return INVALID_PARAMETERS
if the attributes are set.

Let us not set the memory region attributes for MEM_LEND.

Fixes: 82a8daaecfd9 ("firmware: arm_ffa: Add support for MEM_LEND")
Reported-by: Joao Alves <joao.alves@arm.com>
Reported-by: Olivier Deprez <olivier.deprez@arm.com>
Link: https://lore.kernel.org/r/20230919-ffa_v1-1_notif-v2-13-6f3a3ca3923c@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: imx: Add imx8mm-prt8mm.dtb to build

[ Upstream commit f09752eaf0e8f8befc26b44c4d3e15633e56d16a ]

imx8mm-prt8mm.dts was not getting built. Add it to the build.

Fixes: 58497d7a13ed ("arm64: dts: imx: add Protonic PRT8MM board")
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: imx8m: Enable OCOTP clock for imx8mm before reading registers

[ Upstream commit 9d1e8275a28f51599d754ce661c91e0a689c0234 ]

Commit 836fb30949d9 ("soc: imx8m: Enable OCOTP clock before reading the
register") added configuration to enable the OCOTP clock before
attempting to read from the associated registers.

This same kexec issue is present with the imx8m SoCs that use the
imx8mm_soc_uid function (e.g. imx8mp). This requires the imx8mm_soc_uid
function to configure the OCOTP clock before accessing the associated
registers. This change implements the same clock enable functionality
that is present in the imx8mq_soc_revision function for the
imx8mm_soc_uid function.

Signed-off-by: Nathan Rossi <nathan.rossi@digi.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Fixes: 836fb30949d9 ("soc: imx8m: Enable OCOTP clock before reading the register")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/powerpc: Fix emit_tests to work with run_kselftest.sh

[ Upstream commit 58b33e78a31782ffe25d404d5eba9a45fe636e27 ]

In order to use run_kselftest.sh the list of tests must be emitted to
populate kselftest-list.txt.

The powerpc Makefile is written to use EMIT_TESTS. But support for
EMIT_TESTS was dropped in commit d4e59a536f50 ("selftests: Use runner.sh
for emit targets"). Although prior to that commit a548de0fe8e1
("selftests: lib.mk: add test execute bit check to EMIT_TESTS") had
already broken run_kselftest.sh for powerpc due to the executable check
using the wrong path.

It can be fixed by replacing the EMIT_TESTS definitions with actual
emit_tests rules in the powerpc Makefiles. This makes run_kselftest.sh
able to run powerpc tests:

  $ cd linux
  $ export ARCH=powerpc
  $ export CROSS_COMPILE=powerpc64le-linux-gnu-
  $ make headers
  $ make -j -C tools/testing/selftests install
  $ grep -c "^powerpc" tools/testing/selftests/kselftest_install/kselftest-list.txt
  182

Fixes: d4e59a536f50 ("selftests: Use runner.sh for emit targets")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230921072623.828772-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/powerpc: Pass make context to children

[ Upstream commit 4ecd0868c5138238dec8a1549bb6ff8e5b48208b ]

Make supports passing the 'jobserver' (parallel make support) to child
invocations of make when either
1. The target command uses $(MAKE) directly
2. The command starts with '+'

This context is not passed through expansions that result in $(MAKE), so
the macros used in several places fail to pass on the jobserver context.
Warnings are also raised by the child mentioning this.

Prepend macros lines that invoke $(MAKE) with '+' to allow passing the
jobserver context to these children.

Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230228000709.124727-3-bgray@linux.ibm.com
Stable-dep-of: 58b33e78a317 ("selftests/powerpc: Fix emit_tests to work with run_kselftest.sh")
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/powerpc: Use CLEAN macro to fix make warning

[ Upstream commit 69608683a65be5322ef44091eaeb9890472b2eea ]

The CLEAN macro was added in 337f1e36 to prevent the

    Makefile:50: warning: overriding recipe for target 'clean'
    ../../lib.mk:124: warning: ignoring old recipe for target 'clean'

style warnings. Expand it's use to fix another case of redefining a
target directly.

Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230228000709.124727-2-bgray@linux.ibm.com
Stable-dep-of: 58b33e78a317 ("selftests/powerpc: Fix emit_tests to work with run_kselftest.sh")
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: rk817: Fix node refcount leak

[ Upstream commit 488ef44c068e79752dba8eda0b75f524f111a695 ]

Dan Carpenter reports that the Smatch static checker warning has found
that there is another refcount leak in the probe function. While
of_node_put() was added in one of the return paths, it should in
fact be added for ALL return paths that return an error and at driver
removal time.

Fixes: 54c03bfd094f ("power: supply: Fix refcount leak in rk817_charger_probe")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Closes: https://lore.kernel.org/linux-pm/dc0bb0f8-212d-4be7-be69-becd2a3f9a80@kili.mountain/
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20230920145644.57964-1-macroalpha82@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xtensa: boot/lib: fix function prototypes

[ Upstream commit f54d02c8f2cc4b46ba2a3bd8252a6750453b6f2b ]

Add function prototype for gunzip() to the boot library code and make
exit() and zalloc() static.

arch/xtensa/boot/lib/zmem.c:8:6: warning: no previous prototype for 'exit' [-Wmissing-prototypes]
    8 | void exit (void)
arch/xtensa/boot/lib/zmem.c:13:7: warning: no previous prototype for 'zalloc' [-Wmissing-prototypes]
   13 | void *zalloc(unsigned size)
arch/xtensa/boot/lib/zmem.c:35:6: warning: no previous prototype for 'gunzip' [-Wmissing-prototypes]
   35 | void gunzip (void *dst, int dstlen, unsigned char *src, int *lenp)

Fixes: 4bedea945451 ("xtensa: Architecture support for Tensilica Xtensa Part 2")
Fixes: e7d163f76665 ("xtensa: Removed local copy of zlib and fixed O= support")
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xtensa: umulsidi3: fix conditional expression

[ Upstream commit 9aecda97ec3deecbfa7670877c8ddfd3d0fc87c4 ]

Even when a variant has one or more of these defines set to 1, the
multiplier code paths are not used. Change the expression so that the
correct code paths are used.

arch/xtensa/lib/umulsidi3.S:44:38: warning: "XCHAL_NO_MUL" is not defined, evaluates to 0 [-Wundef]
   44 | #if defined(__XTENSA_CALL0_ABI__) && XCHAL_NO_MUL
arch/xtensa/lib/umulsidi3.S:145:38: warning: "XCHAL_NO_MUL" is not defined, evaluates to 0 [-Wundef]
  145 | #if defined(__XTENSA_CALL0_ABI__) && XCHAL_NO_MUL
arch/xtensa/lib/umulsidi3.S:159:5: warning: "XCHAL_NO_MUL" is not defined, evaluates to 0 [-Wundef]
  159 | #if XCHAL_NO_MUL

Fixes: 8939c58d68f9 ("xtensa: add __umulsidi3 helper")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Message-Id: <20230920052139.10570-16-rdunlap@infradead.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xtensa: boot: don't add include-dirs

[ Upstream commit 54d3d7d363823782c3444ddc41bb8cf1edc80514 ]

Drop the -I<include-dir> options to prevent build warnings since there
is not boot/include directory:

cc1: warning: arch/xtensa/boot/include: No such file or directory [-Wmissing-include-dirs]

Fixes: 437374e9a950 ("restore arch/{ppc/xtensa}/boot cflags")
Fixes: 4bedea945451 ("xtensa: Architecture support for Tensilica Xtensa Part 2")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Message-Id: <20230920052139.10570-15-rdunlap@infradead.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xtensa: iss/network: make functions static

[ Upstream commit 1b59efeb59851277266318f4e0132aa61ce3455e ]

Make 2 functions static to prevent build warnings:

arch/xtensa/platforms/iss/network.c:204:16: warning: no previous prototype for 'tuntap_protocol' [-Wmissing-prototypes]
  204 | unsigned short tuntap_protocol(struct sk_buff *skb)
arch/xtensa/platforms/iss/network.c:444:6: warning: no previous prototype for 'iss_net_user_timer_expire' [-Wmissing-prototypes]
  444 | void iss_net_user_timer_expire(struct timer_list *unused)

Fixes: 7282bee78798 ("xtensa: Architecture support for Tensilica Xtensa Part 8")
Fixes: d8479a21a98b ("xtensa: Convert timers to use timer_setup()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Message-Id: <20230920052139.10570-14-rdunlap@infradead.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xtensa: add default definition for XCHAL_HAVE_DIV32

[ Upstream commit 494e87ffa0159b3f879694a9231089707792a44d ]

When variant FSF is set, XCHAL_HAVE_DIV32 is not defined. Add default
definition for that macro to prevent build warnings:

arch/xtensa/lib/divsi3.S:9:5: warning: "XCHAL_HAVE_DIV32" is not defined, evaluates to 0 [-Wundef]
    9 | #if XCHAL_HAVE_DIV32
arch/xtensa/lib/modsi3.S:9:5: warning: "XCHAL_HAVE_DIV32" is not defined, evaluates to 0 [-Wundef]
    9 | #if XCHAL_HAVE_DIV32

Fixes: 173d6681380a ("xtensa: remove extra header files")
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: lore.kernel.org/r/202309150556.t0yCdv3g-lkp@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: imx-dsp: Fix an error handling path in imx_dsp_setup_channels()

[ Upstream commit e527adfb9b7d9d05a4577c116519e59a2bda4b05 ]

If mbox_request_channel_byname() fails, the memory allocated a few lines
above still need to be freed before going to the error handling path.

Fixes: 046326989a18 ("firmware: imx: Save channel name for further use")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>