review.tizen.org Git - platform/kernel/linux-rpi3.git/log

cpuidle: menu: Retain tick when shallow state is selected

The case addressed by commit 5ef499cd571c (cpuidle: menu: Handle
stopped tick more aggressively) in the stopped tick case is present
when the tick has not been stopped yet too. Namely, if only two CPU
idle states, shallow state A with target residency significantly
below the tick boundary and deep state B with target residency
significantly above it, are available and the predicted idle
duration is above the tick boundary, but below the target residency
of state B, state A will be selected and the CPU may spend indefinite
amount of time in it, which is not quite energy-efficient.

However, if the tick has not been stopped yet and the governor is
about to select a shallow idle state for the CPU even though the idle
duration predicted by it is above the tick boundary, it should be
fine to wake up the CPU early, so the tick can be retained then and
the governor will have a chance to select a deeper state when it runs
next time.

[Note that when this really happens, it will make the idle duration
predictor believe that the CPU might be idle longer than predicted,
which will make it more likely to predict longer idle durations going
forward, but that will also cause deeper idle states to be selected
going forward, on average, which is what's needed here.]

Fixes: 87c9fe6ee495 (cpuidle: menu: Avoid selecting shallow states with stopped tick)
Reported-by: Leo Yan <leo.yan@linaro.org>
Cc: 4.17+ <stable@vger.kernel.org> # 4.17+: 5ef499cd571c (cpuidle: menu: Handle ...)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Merge tag 'pm-4.19-rc1-2' of git://git./linux/kernel/git/rafael/linux-pm

Pull more power management updates from Rafael Wysocki:
"These fix the main idle loop and the menu cpuidle governor, clean up
  the latter, fix a mistake in the PCI bus type's support for system
  suspend and resume, fix the ondemand and conservative cpufreq
  governors, address a build issue in the system wakeup framework and
  make the ACPI C-states desciptions less confusing.

  Specifics:

   - Make the idle loop handle stopped scheduler tick correctly (Rafael
     Wysocki).

   - Prevent the menu cpuidle governor from letting CPUs spend too much
     time in shallow idle states when it is invoked with scheduler tick
     stopped and clean it up somewhat (Rafael Wysocki).

   - Avoid invoking the platform firmware to make the platform enter the
     ACPI S3 sleep state with suspended PCIe root ports which may
     confuse the firmware and cause it to crash (Rafael Wysocki).

   - Fix sysfs-related race in the ondemand and conservative cpufreq
     governors which may cause the system to crash if the governor
     module is removed during an update of CPU frequency limits (Henry
     Willard).

   - Select SRCU when building the system wakeup framework to avoid a
     build issue in it (zhangyi).

   - Make the descriptions of ACPI C-states vendor-neutral to avoid
     confusion (Prarit Bhargava)"

* tag 'pm-4.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpuidle: menu: Handle stopped tick more aggressively
  sched: idle: Avoid retaining the tick when it has been stopped
  PCI / ACPI / PM: Resume all bridges on suspend-to-RAM
  cpuidle: menu: Update stale polling override comment
  cpufreq: governor: Avoid accessing invalid governor_data
  x86/ACPI/cstate: Make APCI C1 FFH MWAIT C-state description vendor-neutral
  cpuidle: menu: Fix white space
  PM / sleep: wakeup: Fix build error caused by missing SRCU support

Merge git://git./linux/kernel/git/davem/ide

Pull IDE updates from David Miller:

- Remove redundant variables (Colin Ian King)

- Expected switch fall-through annotations (Gustavo A. R. Silva)

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide:
  ide: mark expected switch fall-throughs
  ide-tape: remove redundant variable buffer_size
  ide: remove redundant variables queue_run_ms and left

Merge git://git./linux/kernel/git/davem/sparc

Pull sparc updates from David Miller:
"Nothing super serious:

   - Convert sparc32 over to NO_BOOTMEM (Mike Rapoport)

   - Use dma_noncoherent_ops on sparc32 (Christoph Hellwig)

   - Fix kbuild defconfig handling on sparc32 (Masahiro Yamada)"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: fix KBUILD_DEFCONFIG for ARCH=sparc32
  sparc32: split ramdisk detection and reservation to a helper function
  sparc32: switch to NO_BOOTMEM
  sparc: mm/init_32: kill trailing whitespace
  sparc: use generic dma_noncoherent_ops

Merge tag 'for-4.19' of git://git.sourceforge.jp/gitroot/uclinux-h8/linux

Pull arch/h8300 updates from Yoshinori Sato.

* tag 'for-4.19' of git://git.sourceforge.jp/gitroot/uclinux-h8/linux:
  h8300: fix IRQ no
  arch/h8300: add a defconfig target
  arch/h8300: eliminate kgbd.c warning
  arch/h8300: eliminate ptrace.h warnings
  h8300:let the checker know that size_t is ulong
  h8300: Don't include linux/kernel.h in asm/atomic.h
  h8300: remove unnecessary of_platform_populate call
  h8300: Correct signature of test_bit()
  h8300: irqchip: fix warning
  h8300: switch to NO_BOOTMEM
  h8300: gcc-8.1 fix
  h8300: Add missing output register.

h8300: fix IRQ no

Old timer handler use 24 (Compare match A).
But current timer handler use 26 (Overflow).

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>

arch/h8300: add a defconfig target

Make the "defconfig" target valid for arch/h8300. Currently
"make ARCH=h8300 defconfig" produces:

*** Can't find default configuration "arch/h8300/defconfig"!
../scripts/kconfig/Makefile:87: recipe for target 'defconfig' failed

By adding a value for KBUILD_DEFCONFIG, "make ARCH=h8300 defconfig"
successfully produces a kernel .config file:

*** Default configuration is based on 'edosk2674_defconfig'

This is useful for Kconfig editing/testing.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: uclinux-h8-devel@lists.sourceforge.jp (moderated for non-subscribers)
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>

arch/h8300: eliminate kgbd.c warning

Drop the "const" qualifier from arch_kgdb_ops to eliminate the gcc
warning (gcc version is 8.1.0).

arch/h8300/kernel/kgdb.c:132:24: error: conflicting type qualifiers for 'arch_kgdb_ops'
const struct kgdb_arch arch_kgdb_ops = {
In file included from ../arch/h8300/kernel/kgdb.c:12:
../include/linux/kgdb.h:284:26: note: previous declaration of 'arch_kgdb_ops' was here
extern struct kgdb_arch arch_kgdb_ops;

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: uclinux-h8-devel@lists.sourceforge.jp
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>

arch/h8300: eliminate ptrace.h warnings

Add a "struct task_struct;" stub to arch/h8300's ptrace.h header to
eliminate gcc warnings (gcc version is 8.1.0).

../arch/h8300/include/asm/ptrace.h:32:34: warning: 'struct task_struct' declared inside parameter list will not be visible outside of this definition or declaration
extern long h8300_get_reg(struct task_struct *task, int regno);
../arch/h8300/include/asm/ptrace.h:33:33: warning: 'struct task_struct' declared inside parameter list will not be visible outside of this definition or declaration
extern int h8300_put_reg(struct task_struct *task, int regno,

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: uclinux-h8-devel@lists.sourceforge.jp
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>

h8300:let the checker know that size_t is ulong

All 64bit archs use unsigned long for size_t and most 32bit
archs use 'unsigned int'. By default, this is what is assumed
by sparse.

However, on h8300 (a 32bit arch) size_t is unsigned long which
can led sparse to emit wrong warnings.

Fix this by passing to sparse the flag -msize-long, telling it
that size_t is unsigned long.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>

h8300: Don't include linux/kernel.h in asm/atomic.h

linux/kernel.h isn't needed by asm/atomic.h and will result in circular
dependencies when the asm-generic atomic bitops are built around the
tomic_long_t interface.

Remove the broad include and replace it with linux/compiler.h for
READ_ONCE etc and asm/irqflags.h for arch_local_irq_save etc.

Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>

h8300: remove unnecessary of_platform_populate call

The DT core will call of_platform_populate, so it is not necessary for
arch specific code to call it unless there are custom match entries,
auxdata or parent device. Neither of those apply here, so remove the call.

Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: uclinux-h8-devel@lists.sourceforge.jp
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>

h8300: Correct signature of test_bit()

    mm/filemap.c: In function 'clear_bit_unlock_is_negative_byte':
    mm/filemap.c:1181:30: warning: passing argument 2 of 'test_bit' discards 'volatile' qualifier from pointer target type [-Wdiscarded-qualifiers]
      return test_bit(PG_waiters, mem);
  ^~~
    In file included from include/linux/bitops.h:38,
     from include/linux/kernel.h:11,
     from include/linux/list.h:9,
     from include/linux/wait.h:7,
     from include/linux/wait_bit.h:8,
     from include/linux/fs.h:6,
     from include/linux/dax.h:5,
     from mm/filemap.c:14:
    arch/h8300/include/asm/bitops.h:69:57: note: expected 'const long unsigned int *' but argument is of type 'volatile void *'
     static inline int test_bit(int nr, const unsigned long *addr)
~~~~~~~~~~~~~~~~~~~~~^~~~

Make the bitmask pointed to by the "addr" parameter volatile to fix
this, like is done on other architectures.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>

h8300: irqchip: fix warning

Var "addr" type incorrect.
It have interrupt controler register address.
Type of void __iomem is correct.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>

h8300: switch to NO_BOOTMEM

Commit 0fa1c579349f ("of/fdt: use memblock_virt_alloc for early alloc")
inadvertently switched the DT unflattening allocations from memblock to
bootmem which doesn't work because the unflattening happens before
bootmem is initialized. Swapping the order of bootmem init and
unflattening could also fix this, but removing bootmem is desired. So
enable NO_BOOTMEM on h8300 like other architectures have done.

Fixes: 0fa1c579349f ("of/fdt: use memblock_virt_alloc for early alloc")
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: uclinux-h8-devel@lists.sourceforge.jp
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>

h8300: gcc-8.1 fix

Since gcc 8.1 does not generate an assignment statement to er 0,
we had to explicitly write it.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>

h8300: Add missing output register.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>

Merge tag 'fuse-update-4.19' of git://git./linux/kernel/git/mszeredi/fuse

Pull fuse update from Miklos Szeredi:
"Various bug fixes and cleanups"

* tag 'fuse-update-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: reduce allocation size for splice_write
  fuse: use kvmalloc to allocate array of pipe_buffer structs.
  fuse: convert last timespec use to timespec64
  fs: fuse: Adding new return type vm_fault_t
  fuse: simplify fuse_abort_conn()
  fuse: Add missed unlock_page() to fuse_readpages_fill()
  fuse: Don't access pipe->buffers without pipe_lock()
  fuse: fix initial parallel dirops
  fuse: Fix oops at process_init_reply()
  fuse: umount should wait for all requests
  fuse: fix unlocked access to processing queue
  fuse: fix double request_end()

Merge tag 'ovl-update-4.19' of git://git./linux/kernel/git/mszeredi/vfs

Pull overlayfs updates from Miklos Szeredi:
"This contains two new features:

   - Stack file operations: this allows removal of several hacks from
     the VFS, proper interaction of read-only open files with copy-up,
     possibility to implement fs modifying ioctls properly, and others.

   - Metadata only copy-up: when file is on lower layer and only
     metadata is modified (except size) then only copy up the metadata
     and continue to use the data from the lower file"

* tag 'ovl-update-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: (66 commits)
  ovl: Enable metadata only feature
  ovl: Do not do metacopy only for ioctl modifying file attr
  ovl: Do not do metadata only copy-up for truncate operation
  ovl: add helper to force data copy-up
  ovl: Check redirect on index as well
  ovl: Set redirect on upper inode when it is linked
  ovl: Set redirect on metacopy files upon rename
  ovl: Do not set dentry type ORIGIN for broken hardlinks
  ovl: Add an inode flag OVL_CONST_INO
  ovl: Treat metacopy dentries as type OVL_PATH_MERGE
  ovl: Check redirects for metacopy files
  ovl: Move some dir related ovl_lookup_single() code in else block
  ovl: Do not expose metacopy only dentry from d_real()
  ovl: Open file with data except for the case of fsync
  ovl: Add helper ovl_inode_realdata()
  ovl: Store lower data inode in ovl_inode
  ovl: Fix ovl_getattr() to get number of blocks from lower
  ovl: Add helper ovl_dentry_lowerdata() to get lower data dentry
  ovl: Copy up meta inode data from lowest data inode
  ovl: Modify ovl_lookup() and friends to lookup metacopy dentry
  ...

Merge tag 'xfs-4.19-merge-7' of git://git./fs/xfs/xfs-linux

Pull xfs fixes from Darrick Wong:

- Fix an uninitialized variable

- Don't use obviously garbage AG header counters to calculate
   transaction reservations

- Trigger icount recalculation on bad icount when mounting

* tag 'xfs-4.19-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: fix WARN_ON_ONCE on uninitialized variable
  xfs: sanity check ag header values in xrep_calc_ag_resblks
  xfs: recalculate summary counters at mount time if icount is bad

Merge tag 'for-v4.19' of git://git./linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:

- Improve support for TI bq20z75 in sbs-battery

- Add Qualcomm PM8xxx reboot driver

- Add cros-ec USBPD charger driver

- Move ds2760 battery driver from w1 to power-supply and add DT support

- Misc fixes

* tag 'for-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (28 commits)
  power: supply: bq27xxx: Update comments
  power: supply: max77693_charger: fix unintentional fall-through
  power: supply: mark expected switch fall-throughs
  power: supply: lego_ev3_battery: fix Vce offset
  power: supply: lego_ev3_battery: Don't ignore iio_read_channel_processed() return value
  power: supply: ds2760_battery: add devicetree probing
  power: supply: ds2760_battery: merge ds2760 supply driver with its w1 slave companion
  w1: core: match sub-nodes of bus masters in devicetree
  dt-bindings: w1: document bindings for ds2760 battery monitor
  dt-bindings: w1: document generic onewire bindings
  power: supply: adp5061: Fix a couple off by ones
  dt-bindings: power: reset: qcom: Add resin binding
  adp5061: New driver for ADP5061 I2C battery charger
  power: generic-adc-battery: check for duplicate properties copied from iio channels
  power: generic-adc-battery: fix out-of-bounds write when copying channel properties
  power: supply: axp288_charger: Fix initial constant_charge_current value
  power: supply: ab8500: stop using getnstimeofday64()
  power: gemini-poweroff: Avoid more spurious poweroffs
  power: vexpress: fix corruption in notifier registration
  power: remove possible deadlock when unregistering power_supply
  ...

Merge branch 'i2c/for-4.19' of git://git./linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:

- the core has now a lockless variant of i2c_smbus_xfer. Some open
   coded versions of this got removed in drivers. This also enables
   proper SCCB support in regmap.

- locking got a more precise naming. i2c_{un}lock_adapter() had to go,
   and we know use i2c_lock_bus() consistently with flags like
   I2C_LOCK_ROOT_ADAPTER and I2C_LOCK_SEGMENT to avoid ambiguity.

- the gpio fault injector got a new delicate testcase

- the bus recovery procedure got fixed to handle the new testcase
   correctly

- a new quirk flag for controllers not able to handle zero length
   messages together with driver updates to use it

- new drivers: FSI bus attached I2C masters, GENI I2C controller, Owl
   family S900

- and a good set of driver improvements and bugfixes

* 'i2c/for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (77 commits)
  i2c: rcar: implement STOP and REP_START according to docs
  i2c: rcar: refactor private flags
  i2c: core: ACPI: Make acpi_gsb_i2c_read_bytes() check i2c_transfer return value
  i2c: core: ACPI: Properly set status byte to 0 for multi-byte writes
  dt-bindings: i2c: rcar: Add r8a774a1 support
  dt-bindings: i2c: sh_mobile: Add r8a774a1 support
  i2c: imx: Simplify stopped state tracking
  i2c: imx: Fix race condition in dma read
  i2c: pasemi: remove hardcoded bus numbers on smbus
  i2c: designware: Add SPDX license tag
  i2c: designware: Convert to use struct i2c_timings
  i2c: core: Parse SDA hold time from firmware
  i2c: designware-pcidrv: Mark expected switch fall-through
  i2c: amd8111: Mark expected switch fall-through
  i2c: sh_mobile: use core to detect 'no zero length read' quirk
  i2c: xlr: use core to detect 'no zero length' quirk
  i2c: rcar: use core to detect 'no zero length' quirk
  i2c: stu300: use core to detect 'no zero length' quirk
  i2c: pmcmsp: use core to detect 'no zero length' quirk
  i2c: mxs: use core to detect 'no zero length' quirk
  ...

Merge branch 'siginfo-linus' of git://git./linux/kernel/git/ebiederm/user-namespace

Pull core signal handling updates from Eric Biederman:
"It was observed that a periodic timer in combination with a
  sufficiently expensive fork could prevent fork from every completing.
  This contains the changes to remove the need for that restart.

  This set of changes is split into several parts:

   - The first part makes PIDTYPE_TGID a proper pid type instead
     something only for very special cases. The part starts using
     PIDTYPE_TGID enough so that in __send_signal where signals are
     actually delivered we know if the signal is being sent to a a group
     of processes or just a single process.

   - With that prep work out of the way the logic in fork is modified so
     that fork logically makes signals received while it is running
     appear to be received after the fork completes"

* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (22 commits)
  signal: Don't send signals to tasks that don't exist
  signal: Don't restart fork when signals come in.
  fork: Have new threads join on-going signal group stops
  fork: Skip setting TIF_SIGPENDING in ptrace_init_task
  signal: Add calculate_sigpending()
  fork: Unconditionally exit if a fatal signal is pending
  fork: Move and describe why the code examines PIDNS_ADDING
  signal: Push pid type down into complete_signal.
  signal: Push pid type down into __send_signal
  signal: Push pid type down into send_signal
  signal: Pass pid type into do_send_sig_info
  signal: Pass pid type into send_sigio_to_task & send_sigurg_to_task
  signal: Pass pid type into group_send_sig_info
  signal: Pass pid and pid type into send_sigqueue
  posix-timers: Noralize good_sigevent
  signal: Use PIDTYPE_TGID to clearly store where file signals will be sent
  pid: Implement PIDTYPE_TGID
  pids: Move the pgrp and session pid pointers from task_struct to signal_struct
  kvm: Don't open code task_pid in kvm_vcpu_ioctl
  pids: Compute task_tgid using signal->leader_pid
  ...

Merge branches 'pm-cpufreq', 'pm-pci' and 'pm-sleep'

Merge fixes for the ondemand and conservative cpufreq governors,
PCI power management and system wakeup framework.

* pm-cpufreq:
  cpufreq: governor: Avoid accessing invalid governor_data

* pm-pci:
  PCI / ACPI / PM: Resume all bridges on suspend-to-RAM

* pm-sleep:
  PM / sleep: wakeup: Fix build error caused by missing SRCU support

Merge tag 'chrome-platform-for-linus-4.19' of git://git./linux/kernel/git/bleung/chrome-platform

Pull chrome platform updates from Benson Leung.

Everything but the SPDX identifier updates actually came in earlier
through the MFD merge.

* tag 'chrome-platform-for-linus-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform:
platform/chrome: chromeos_tbmc - fix SPDX identifier

Merge tag 'microblaze-v4.19-rc1' of git://git.monstr.eu/linux-2.6-microblaze

Pull arch/microblaze updates from Michal Simek:

- use generic noncoherent direct mapping

- use LDFLAGS instead of LD

- pci error path fix

- remove incorrect comments

* tag 'microblaze-v4.19-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze/PCI: Remove stale pcibios_align_resource() comment
  microblaze: delete wrong comment about machine_early_init
  microblaze: add endianness options to LDFLAGS instead of LD
  microblaze: remove consistent_sync and consistent_sync_page
  microblaze: use generic dma_noncoherent_ops
  microblaze: warn if of_iomap() failed

sparc: fix KBUILD_DEFCONFIG for ARCH=sparc32

As commit 5ba800962a80 ("kbuild: update ARCH alias info for sparc")
addressed, SPARC accepts ARCH=sparc32 as an alias.

However, arch/sparc/Makefile wrongly sets KBUILD_DEFCONFIG, then
sparc64_defconfig is chosen as the base configuration for ARCH=sparc32.

  $ make ARCH=sparc32 defconfig
  *** Default configuration is based on 'sparc64_defconfig'
  #
  # configuration written to .config
  #

Fix the logic to choose sparc64_defconfig only when ARCH=sparc64.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'sparc32-NO_BOOTMEM'

Mike Rapoport says:

====================
sparc32: switch to NO_BOOTMEM

These patches convert sparc32 to use memblock + nobootmem.
I've made the conversion as simple as possible, just enough to allow moving
HAVE_MEMBLOCK and NO_BOOTMEM to the common SPARC configuration.

v2 changes:
* split whitespace changes to a separate patch
* address Sam's comments [1]

[1] https://lkml.org/lkml/2018/8/2/403
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

sparc32: split ramdisk detection and reservation to a helper function

The detection and reservation of ramdisk memory were separated to allow
bootmem bitmap initialization after the ramdisk boundaries are detected.
Since the bootmem initialization is removed, the reservation of ramdisk
memory is done immediately after its boundaries are found.

Split the entire block into a separate helper function.

Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

sparc32: switch to NO_BOOTMEM

Each populated sparc_phys_bank is added to memblock.memory. The
reserve_bootmem() calls are replaced with memblock_reserve(), and the
bootmem bitmap initialization is droppped.

Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

sparc: mm/init_32: kill trailing whitespace

Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sparc: use generic dma_noncoherent_ops

Switch to the generic noncoherent direct mapping implementation.

This removes the previous sync_single_for_device implementation, which
looks bogus given that no syncing is happening in the similar but more
important map_single case.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

microblaze/PCI: Remove stale pcibios_align_resource() comment

commit 01cf9d524ff0 ("microblaze/PCI: Support generic Xilinx AXI PCIe Host
Bridge IP driver")

and

commit ecf677c8dcaa ("PCI: Add a generic weak pcibios_align_resource()")

first patched then removed pcibios_align_resource() from the microblaze
architecture code but failed to remove the comment that was added to
it.

Remove it since it has now become stale and it is quite confusing.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Bharat Kumar Gogada <bharatku@xilinx.com>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Merge tag 'please-pull-noboot' of git://git./linux/kernel/git/aegl/linux

Pull ia64 NO_BOOTMEM conversion from Tony Luck:
"Mike Rapoport kindly fixed up ia64 to work with NO_BOOTMEM"

* tag 'please-pull-noboot' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  ia64: switch to NO_BOOTMEM
  ia64: use mem_data to detect nodes' minimal and maximal PFNs
  ia64: remove unused num_dma_physpages member from 'struct early_node_data'
  ia64: contig/paging_init: reduce code duplication

Merge tag 'linux-kselftest-4.19-rc1' of git://git./linux/kernel/git/shuah/linux-kselftest

Pull Kselftest update from Shuah Khan:

- add cgroup core selftests

- fix compile warnings in android ion test

- fix to bugs in exclude and skip paths in vDSO test

- remove obsolete config options

- add missing .gitignore file

* tag 'linux-kselftest-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/ftrace: Fix kprobe string testcase to not probe notrace function
  selftests: mount: remove no longer needed config option
  selftests: cgroup: add gitignore file
  Add cgroup core selftests
  selftests: vDSO - fix to return KSFT_SKIP when test couldn't be run
  selftests: vDSO - fix to exclude x86 test on non-x86 platforms
  selftests/android: initialize heap_type to avoid compiling warning

Merge tag 'trace-v4.19' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:

- Restructure of lockdep and latency tracers

   This is the biggest change. Joel Fernandes restructured the hooks
   from irqs and preemption disabling and enabling. He got rid of a lot
   of the preprocessor #ifdef mess that they caused.

   He turned both lockdep and the latency tracers to use trace events
   inserted in the preempt/irqs disabling paths. But unfortunately,
   these started to cause issues in corner cases. Thus, parts of the
   code was reverted back to where lockdep and the latency tracers just
   get called directly (without using the trace events). But because the
   original change cleaned up the code very nicely we kept that, as well
   as the trace events for preempt and irqs disabling, but they are
   limited to not being called in NMIs.

- Have trace events use SRCU for "rcu idle" calls. This was required
   for the preempt/irqs off trace events. But it also had to not allow
   them to be called in NMI context. Waiting till Paul makes an NMI safe
   SRCU API.

- New notrace SRCU API to allow trace events to use SRCU.

- Addition of mcount-nop option support

- SPDX headers replacing GPL templates.

- Various other fixes and clean ups.

- Some fixes are marked for stable, but were not fully tested before
   the merge window opened.

* tag 'trace-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (44 commits)
  tracing: Fix SPDX format headers to use C++ style comments
  tracing: Add SPDX License format tags to tracing files
  tracing: Add SPDX License format to bpf_trace.c
  blktrace: Add SPDX License format header
  s390/ftrace: Add -mfentry and -mnop-mcount support
  tracing: Add -mcount-nop option support
  tracing: Avoid calling cc-option -mrecord-mcount for every Makefile
  tracing: Handle CC_FLAGS_FTRACE more accurately
  Uprobe: Additional argument arch_uprobe to uprobe_write_opcode()
  Uprobes: Simplify uprobe_register() body
  tracepoints: Free early tracepoints after RCU is initialized
  uprobes: Use synchronize_rcu() not synchronize_sched()
  tracing: Fix synchronizing to event changes with tracepoint_synchronize_unregister()
  ftrace: Remove unused pointer ftrace_swapper_pid
  tracing: More reverting of "tracing: Centralize preemptirq tracepoints and unify their usage"
  tracing/irqsoff: Handle preempt_count for different configs
  tracing: Partial revert of "tracing: Centralize preemptirq tracepoints and unify their usage"
  tracing: irqsoff: Account for additional preempt_disable
  trace: Use rcu_dereference_raw for hooks from trace-event subsystem
  tracing/kprobes: Fix within_notrace_func() to check only notrace functions
  ...

Merge tag 'ceph-for-4.19-rc1' of git://github.com/ceph/ceph-client

Pull ceph updates from Ilya Dryomov:
"The main things are support for cephx v2 authentication protocol and
  basic support for rbd images within namespaces (myself).

  Also included are y2038 conversion patches from Arnd, a pile of
  miscellaneous fixes from Chengguang and Zheng's feature bit
  infrastructure for the filesystem"

* tag 'ceph-for-4.19-rc1' of git://github.com/ceph/ceph-client: (40 commits)
  ceph: don't drop message if it contains more data than expected
  ceph: support cephfs' own feature bits
  crush: fix using plain integer as NULL warning
  libceph: remove unnecessary non NULL check for request_key
  ceph: refactor error handling code in ceph_reserve_caps()
  ceph: refactor ceph_unreserve_caps()
  ceph: change to void return type for __do_request()
  ceph: compare fsc->max_file_size and inode->i_size for max file size limit
  ceph: add additional size check in ceph_setattr()
  ceph: add additional offset check in ceph_write_iter()
  ceph: add additional range check in ceph_fallocate()
  ceph: add new field max_file_size in ceph_fs_client
  libceph: weaken sizeof check in ceph_x_verify_authorizer_reply()
  libceph: check authorizer reply/challenge length before reading
  libceph: implement CEPHX_V2 calculation mode
  libceph: add authorizer challenge
  libceph: factor out encrypt_authorizer()
  libceph: factor out __ceph_x_decrypt()
  libceph: factor out __prepare_write_connect()
  libceph: store ceph_auth_handshake pointer in ceph_connection
  ...

Merge tag 'rtc-4.19' of git://git./linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
"It is now possible to add custom sysfs attributes while avoiding a
  possible race condition. Unused code has been removed resulting in a
  nice reduction of the code base. And more drivers have been switched
  to SPDX by their maintainers.

Summary:

  Subsystem:
   - new helpers to add custom sysfs attributes
   - struct rtc_task removal along with rtc_irq_[un]register()
   - rtc_irq_set_state and rtc_irq_set_freq are not exported anymore

  Drivers:
   - armada38x: reset after rtc power loss
   - ds1307: now supports m41t11
   - isl1208: now supports isl1219 and tamper detection
   - pcf2127: internal SRAM support"

* tag 'rtc-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (34 commits)
  rtc: ds1307: simplify hwmon config
  rtc: s5m: Add SPDX license identifier
  rtc: maxim: Add SPDX license identifiers
  rtc: isl1219: add device tree documentation
  rtc: isl1208: set ev-evienb bit from device tree
  rtc: isl1208: Add "evdet" interrupt source for isl1219
  rtc: isl1208: add support for isl1219 with tamper detection
  rtc: sysfs: facilitate attribute add to rtc device
  rtc: remove struct rtc_task
  char: rtc: remove task handling
  rtc: pcf85063: preserve control register value between stop and start
  rtc: sh: remove unused variable rtc_dev
  rtc: unexport rtc_irq_set_*
  rtc: simplify rtc_irq_set_state/rtc_irq_set_freq
  rtc: remove irq_task and irq_task_lock
  rtc: remove rtc_irq_register/rtc_irq_unregister
  rtc: sh: remove dead code
  rtc: sa1100: don't set PIE frequency
  rtc: ds1307: support m41t11 variant
  rtc: ds1307: fix data pointer to m41t0
  ...

Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/livepatching

Pull livepatching updates from Jiri Kosina:
"Code cleanups from Kamalesh Babulal"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
livepatch: Validate module/old func name length
livepatch: Remove reliable stacktrace check in klp_try_switch_task()

Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid

Pull HID updates from Jiri Kosina:

- touch_max detection improvements and quirk handling fixes in wacom
   driver from Jason Gerecke and Ping Cheng

- Palm rejection from Dmitry Torokhov and _dial support from Benjamin
   Tissoires for hid-multitouch driver

- Low voltage support for i2c-hid driver from Stephen Boyd

- Guitar-Hero support from Nicolas Adenis-Lamarre

- other assorted small fixes and device ID additions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (40 commits)
  HID: intel_ish-hid: tx_buf memory leak on probe/remove
  HID: intel-ish-hid: Prevent loading of driver on Mehlow
  HID: cougar: Add support for the Cougar 500k Gaming Keyboard
  HID: cougar: make compare_device_paths reusable
  HID: intel-ish-hid: remove redundant variable num_frags
  HID: multitouch: handle palm for touchscreens
  HID: multitouch: touchscreens also use confidence reports
  HID: multitouch: report MT_TOOL_PALM for non-confident touches
  HID: microsoft: support the Surface Dial
  HID: core: do not upper bound the collection stack
  HID: input: enable Totem on the Dell Canvas 27
  HID: multitouch: remove one copy of values
  HID: multitouch: ditch mt_report_id
  HID: multitouch: store a per application quirks value
  HID: multitouch: Store per collection multitouch data
  HID: multitouch: make sure the static list of class is not changed
  input: add MT_TOOL_DIAL
  HID: elan: Add support for touchpad on the Toshiba Click Mini L9W
  HID: elan: Add USB-id for HP x2 10-n000nd touchpad
  HID: elan: Add a flag for selecting if the touchpad has a LED
  ...

Merge tag 'backlight-next-4.19' of git://git./linux/kernel/git/lee/backlight

Pull backlight updates from Lee Jones:
"Core Framework:
   - Remove unused/obsolete code/comments

  New Functionality:
   - Allow less granular brightness specification for high-res PWMs; pwm_bl
   - Align brightness {inc,dec}rements with that perceived by the human-eye; pwm_bl

  Fix-ups:
   - Prepare for the introduction of -Wimplicit-fall-through; adp8860_bl

  Bug Fixes:
   - Fix uninitialised variable; pwm_bl"

* tag 'backlight-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: pwm_bl: Fix uninitialized variable
  backlight: adp8860: Mark expected switch fall-through
  backlight: Remove obsolete comment for ->state
  dt-bindings: pwm-backlight: Move brightness-levels to optional
  backlight: pwm_bl: Compute brightness of LED linearly to human eye
  dt-bindings: pwm-backlight: Add a num-interpolation-steps property
  backlight: pwm_bl: Linear interpolation between brightness-levels

Merge tag 'mfd-next-4.19' of git://git./linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
"New Drivers:
   - Add Cirrus Logic Madera Codec (CS47L35, CS47L85 and CS47L90/91) driver
   - Add ChromeOS EC CEC driver
   - Add ROHM BD71837 PMIC driver

  New Device Support:
   - Add support for Dialog Semi DA9063L PMIC variant to DA9063
   - Add support for Intel Ice Lake to Intel-PLSS-PCI
   - Add support for X-Powers AXP806 to AXP20x

  New Functionality:
   - Add support for USB Charging to the ChromeOS Embedded Controller
   - Add support for HDMI CEC to the ChromeOS Embedded Controller
   - Add support for HDMI CEC to Intel HDMI
   - Add support for accessory detection to Madera devices
   - Allow individual pins to be configured via DT' wlf,csnaddr-pd
   - Provide legacy platform specific EEPROM/Watchdog commands; rave-sp

  Fix-upsL
   - Trivial renaming/spelling fixes; cros_ec, da9063-*
   - Convert to Managed Resources (devm_*); da9063-*, ti_am335x_tscadc
   - Transition to helper macros/functions; da9063-*
   - Constify; kempld-core
   - Improve error path/messages; wm8994-core
   - Disable IRQs locally instead of relying on USB subsystem; dln2
   - Remove unused code; rave-sp
   - New exports; sec-core

  Bug Fixes:
   - Fix possible false I2C transaction error; arizona-core
   - Fix declared memory area size; hi655x-pmic
   - Fix checksum type; rave-sp
   - Fix incorrect default serial port configuration: rave-sp
   - Fix incorrect coherent DMA mask for sub-devices; sm501"

* tag 'mfd-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (60 commits)
  mfd: madera: Add register definitions for accessory detect
  mfd: sm501: Set coherent_dma_mask when creating subdevices
  mfd: bd71837: Devicetree bindings for ROHM BD71837 PMIC
  mfd: bd71837: Core driver for ROHM BD71837 PMIC
  media: platform: cros-ec-cec: Fix dependency on MFD_CROS_EC
  mfd: sec-core: Export OF module alias table
  mfd: as3722: Disable auto-power-on when AC OK
  mfd: axp20x: Support AXP806 in I2C mode
  mfd: axp20x: Add self-working mode support for AXP806
  dt-bindings: mfd: axp20x: Add "self-working" mode for AXP806
  mfd: wm8994: Allow to configure CS/ADDR Pulldown from dts
  mfd: wm8994: Allow to configure Speaker Mode Pullup from dts
  mfd: rave-sp: Emulate CMD_GET_STATUS on device that don't support it
  mfd: rave-sp: Add legacy watchdog ping command translation
  mfd: rave-sp: Add legacy EEPROM access command translation
  mfd: rave-sp: Initialize flow control and parity of the port
  mfd: rave-sp: Fix incorrectly specified checksum type
  mfd: rave-sp: Remove unused defines
  mfd: hi655x: Fix regmap area declared size for hi655x
  mfd: ti_am335x_tscadc: Fix struct clk memory leak
  ...

Merge tag 'edac_fixes_for_4.19' of git://git./linux/kernel/git/bp/bp

Pull EDAC fix from Borislav Petkov:
"An urgent fix for a NULL ptr deref on machines with LRDDR4 DIMMs, from
Takashi Iwai"

* tag 'edac_fixes_for_4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
EDAC: Add missing MEM_LRDDR4 entry in edac_mem_types[]

Raise the minimum required gcc version to 4.6

Various architectures fail to build properly with older versions of the
gcc compiler.

An example from Guenter Roeck in thread [1]:
>
>   In file included from ./include/linux/mm.h:17:0,
>                    from ./include/linux/pid_namespace.h:7,
>                    from ./include/linux/ptrace.h:10,
>                    from arch/openrisc/kernel/asm-offsets.c:32:
>   ./include/linux/mm_types.h:497:16: error: flexible array member in otherwise empty struct
>
> This is just an example with gcc 4.5.1 for or32. I have seen the problem
> with gcc 4.4 (for unicore32) as well.

So update the minimum required version of gcc to 4.6.

[1] https://lore.kernel.org/lkml/20180814170904.GA12768@roeck-us.net/

Miscellanea:

- Update Documentation/process/changes.rst

- Remove and consolidate version test blocks in compiler-gcc.h for
   versions lower than 4.6

Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ia64: Fix kernel BUG at lib/ioremap.c:72!

Commit 0bbf47eab469 ("ia64: use asm-generic/io.h") results in a BUG
while booting ia64. This is because asm-generic/io.h defines
PCI_IOBASE, which results in the function acpi_pci_root_remap_iospace()
doing a lot of unnecessary (and wrong) things.

I'd suggested an #if !CONFIG_IA64 in the functon, but Arnd suggested
keeping the fix inside the arch/ia64 tree.

Fixes: 0bbf47eab469 ("ia64: use asm-generic/io.h")
Suggested-by: Arnd Bergman <arnd@arndb.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for-4.19/upstream' into for-linus

Merge branch 'for-4.19/wiimote' into for-linus

Guitar-Hero devices support for hid-wiimote

Merge branch 'for-4.19/wacom' into for-linus

Wacom driver updates:

- touch_max detection improvements
- quirk handling cleanup
- get rid of wacom custom usages

Merge branch 'for-4.19/upstream' into for-linus

Assorted small driver/core fixes.

Merge branch 'for-4.19/sony' into for-linus

devm_* API conversion for hid-sony

Merge branch 'for-4.19/multitouch-multiaxis' into for-linus

Multitouch updates:

- Dial support
- Palm rejection for touchscreens
- a few small assorted fixes

Merge branch 'for-4.19/intel-ish' into for-linus

Device-specific fixes for hid-intel-ish

Merge branch 'for-4.19/i2c-hid' into for-linus

Low voltage support for i2c-hid

Merge branch 'for-4.19/elan' into for-linus

Resolution/pressure fixes and new device support for hid-elan

Merge branch 'for-4.19/cougar' into for-linus

New device support for hid-cougar

i2c: rcar: implement STOP and REP_START according to docs

When doing a REP_START after a read message, the driver used to trigger
a STOP first which would then be overwritten by REP_START. This was the
only stable method found when doing the last refactoring. However, this
was not in accordance with the documentation.

After research from our BSP team and myself, we now can implement a
version which works and is according to the documentation. The new
approach ensures the ICMCR register is only changed when really needed.

Tested on a R-Car Gen2 (H2) and Gen3 with DMA (M3N).

Signed-off-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

i2c: rcar: refactor private flags

Use BIT macro to avoid shift-31-problem, indent a little more and use
GENMASK to make it easier to add new flags.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

i2c: core: ACPI: Make acpi_gsb_i2c_read_bytes() check i2c_transfer return value

Currently acpi_gsb_i2c_read_bytes() directly returns i2c_transfer's return
value. i2c_transfer returns a value < 0 on error and 2 (for 2 successfully
executed transfers) on success. But the ACPI code expects 0 on success, so
currently acpi_gsb_i2c_read_bytes()'s caller does:

if (status > 0)
status = 0;

This commit makes acpi_gsb_i2c_read_bytes() return a value which can be
directly consumed by the ACPI code, mirroring acpi_gsb_i2c_write_bytes(),
this commit also makes acpi_gsb_i2c_read_bytes() explitcly check that
i2c_transfer returns 2, rather then accepting any value > 0.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

i2c: core: ACPI: Properly set status byte to 0 for multi-byte writes

acpi_gsb_i2c_write_bytes() returns i2c_transfer()'s return value, which
is the number of transfers executed on success, so 1.

The ACPI code expects us to store 0 in gsb->status for success, not 1.

Specifically this breaks the following code in the Thinkpad 8 DSDT:

            ECWR = I2CW = ECWR /* \_SB_.I2C1.BAT0.ECWR */
            If ((ECST == Zero))
            {
                ECRD = I2CR /* \_SB_.I2C1.I2CR */
            }

Before this commit we set ECST to 1, causing the read to never happen
breaking battery monitoring on the Thinkpad 8.

This commit makes acpi_gsb_i2c_write_bytes() return 0 when i2c_transfer()
returns 1, so the single write transfer completed successfully, and
makes it return -EIO on for other (unexpected) return values >= 0.

Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

dt-bindings: i2c: rcar: Add r8a774a1 support

Document RZ/G2M (R8A774A1) I2C compatibility with the relevant driver
dt-bindings.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

dt-bindings: i2c: sh_mobile: Add r8a774a1 support

Document RZ/G2M (R8A774A1) SoC bindings.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

cpuidle: menu: Handle stopped tick more aggressively

Commit 87c9fe6ee495 (cpuidle: menu: Avoid selecting shallow states
with stopped tick) missed the case when the target residencies of
deep idle states of CPUs are above the tick boundary which may cause
the CPU to get stuck in a shallow idle state for a long time.

Say there are two CPU idle states available: one shallow, with the
target residency much below the tick boundary and one deep, with
the target residency significantly above the tick boundary.  In
that case, if the tick has been stopped already and the expected
next timer event is relatively far in the future, the governor will
assume the idle duration to be equal to TICK_USEC and it will select
the idle state for the CPU accordingly.  However, that will cause the
shallow state to be selected even though it would have been more
energy-efficient to select the deep one.

To address this issue, modify the governor to always use the time
till the closest timer event instead of the predicted idle duration
if the latter is less than the tick period length and the tick has
been stopped already.  Also make it extend the search for a matching
idle state if the tick is stopped to avoid settling on a shallow
state if deep states with target residencies above the tick period
length are available.

In addition, make it always indicate that the tick should be stopped
if it has been stopped already for consistency.

Fixes: 87c9fe6ee495 (cpuidle: menu: Avoid selecting shallow states with stopped tick)
Reported-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: 4.17+ <stable@vger.kernel.org> # 4.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

sched: idle: Avoid retaining the tick when it has been stopped

If the tick has been stopped already, but the governor has not asked to
stop it (which it can do sometimes), the idle loop should invoke
tick_nohz_idle_stop_tick(), to let tick_nohz_stop_tick() take care
of this case properly.

Fixes: 554c8aa8ecad (sched: idle: Select idle state before stopping the tick)
Cc: 4.17+ <stable@vger.kernel.org> # 4.17+
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

i2c: imx: Simplify stopped state tracking

Always update the stopped state when busy status have been checked.
This is identical to what was done before, with the exception of error
handling.
Without this change, some errors cause the stopped state to be left in
incorrect state in i2c_imx_stop(), i2c_imx_dma_read(), i2c_imx_read() and
i2c_imx_xfer().

Signed-off-by: Esben Haabendal <eha@deif.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

i2c: imx: Fix race condition in dma read

This fixes a race condition, where the DMAEN bit ends up being set after
I2C slave has transmitted a byte following the dummy read. When that
happens, an interrupt is generated instead, and no DMA request is generated
to kickstart the DMA read, and a timeout happens after DMA_TIMEOUT (1 sec).

Fixed by setting the DMAEN bit before the dummy read.

Signed-off-by: Esben Haabendal <eha@deif.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org

i2c: pasemi: remove hardcoded bus numbers on smbus

The pasemi smbus controller uses PCI_FUNC(dev->devfn) to define which
number bus to attach to, however this fails when something else is
probed first, for example an ATI Radeon graphics card will claim 9 or
10 busses, including the ones the pasemi wants.
Patch the driver to call i2c_add_adapter rather than
i2c_add_numbered_adapter.

Signed-off-by: Darren Stevens <darren@stevens-zone.net>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

i2c: designware: Add SPDX license tag

Replace short statement in comment with proper SPDX license tag.

Note, for i2c-desingware-slave.c the identifier is chosen
in accordance with MODULE_LICENSE() macro since it is visible to user.
Another point to this choice is that the header seems to be copy'n'paste
from the other file of this very driver.

Acked-by: Luis Oliveira <Luis.Oliveira@synopsys.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Merge branch 'for-next' of git://git./linux/kernel/git/gerg/m68knommu

Pull m68knommu updates from Greg Ungerer:
"Only two changes.

  One cleans up warnings in the ColdFire DMA code, the other stubs out
  (with warnings) ColdFire clock api functions not normally used"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: Fix typos in Coldfire 5272 DMA debug code
  m68k: coldfire: Normalize clk API

Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

1) Fix races in IPVS, from Tan Hu.

2) Missing unbind in matchall classifier, from Hangbin Liu.

3) Missing act_ife action release, from Vlad Buslov.

4) Cure lockdep splats in ila, from Cong Wang.

5) veth queue leak on link delete, from Toshiaki Makita.

6) Disable isdn's IIOCDBGVAR ioctl, it exposes kernel addresses. From
    Kees Cook.

7) RCU usage fixup in XDP, from Tariq Toukan.

8) Two TCP ULP fixes from Daniel Borkmann.

9) r8169 needs REALTEK_PHY as a Kconfig dependency, from Heiner
    Kallweit.

10) Always take tcf_lock with BH disabled, otherwise we can deadlock
    with rate estimator code paths. From Vlad Buslov.

11) Don't use MSI-X on RTL8106e r8169 chips, they don't resume properly.
    From Jian-Hong Pan.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits)
  ip6_vti: fix creating fallback tunnel device for vti6
  ip_vti: fix a null pointer deferrence when create vti fallback tunnel
  r8169: don't use MSI-X on RTL8106e
  net: lan743x_ptp: convert to ktime_get_clocktai_ts64
  net: sched: always disable bh when taking tcf_lock
  ip6_vti: simplify stats handling in vti6_xmit
  bpf: fix redirect to map under tail calls
  r8169: add missing Kconfig dependency
  tools/bpf: fix bpf selftest test_cgroup_storage failure
  bpf, sockmap: fix sock_map_ctx_update_elem race with exist/noexist
  bpf, sockmap: fix map elem deletion race with smap_stop_sock
  bpf, sockmap: fix leakage of smap_psock_map_entry
  tcp, ulp: fix leftover icsk_ulp_ops preventing sock from reattach
  tcp, ulp: add alias for all ulp modules
  bpf: fix a rcu usage warning in bpf_prog_array_copy_core()
  samples/bpf: all XDP samples should unload xdp/bpf prog on SIGTERM
  net/xdp: Fix suspicious RCU usage warning
  net/mlx5e: Delete unneeded function argument
  Documentation: networking: ti-cpsw: correct cbs parameters for Eth1 100Mb
  isdn: Disable IIOCDBGVAR
  ...

ip6_vti: fix creating fallback tunnel device for vti6

When set fb_tunnels_only_for_init_net to 1, don't create fallback tunnel
device for vti6 when a new namespace is created.

Tested:
[root@builder2 ~]# modprobe ip6_tunnel
[root@builder2 ~]# modprobe ip6_vti
[root@builder2 ~]# echo 1 > /proc/sys/net/core/fb_tunnels_only_for_init_net
[root@builder2 ~]# unshare -n
[root@builder2 ~]# ip link
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN mode DEFAULT group
default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip_vti: fix a null pointer deferrence when create vti fallback tunnel

After set fb_tunnels_only_for_init_net to 1, the itn->fb_tunnel_dev will
be NULL and will cause following crash:

[ 2742.849298] BUG: unable to handle kernel NULL pointer dereference at 0000000000000941
[ 2742.851380] PGD 800000042c21a067 P4D 800000042c21a067 PUD 42aaed067 PMD 0
[ 2742.852818] Oops: 0002 [#1] SMP PTI
[ 2742.853570] CPU: 7 PID: 2484 Comm: unshare Kdump: loaded Not tainted 4.18.0-rc8+ #2
[ 2742.855163] Hardware name: Fedora Project OpenStack Nova, BIOS seabios-1.7.5-11.el7 04/01/2014
[ 2742.856970] RIP: 0010:vti_init_net+0x3a/0x50 [ip_vti]
[ 2742.858034] Code: 90 83 c0 48 c7 c2 20 a1 83 c0 48 89 fb e8 6e 3b f6 ff 85 c0 75 22 8b 0d f4 19 00 00 48 8b 93 00 14 00 00 48 8b 14 ca 48 8b 12 <c6> 82 41 09 00 00 04 c6 82 38 09 00 00 45 5b c3 66 0f 1f 44 00 00
[ 2742.861940] RSP: 0018:ffff9be28207fde0 EFLAGS: 00010246
[ 2742.863044] RAX: 0000000000000000 RBX: ffff8a71ebed4980 RCX: 0000000000000013
[ 2742.864540] RDX: 0000000000000000 RSI: 0000000000000013 RDI: ffff8a71ebed4980
[ 2742.866020] RBP: ffff8a71ea717000 R08: ffffffffc083903c R09: ffff8a71ea717000
[ 2742.867505] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8a71ebed4980
[ 2742.868987] R13: 0000000000000013 R14: ffff8a71ea5b49c0 R15: 0000000000000000
[ 2742.870473] FS:  00007f02266c9740(0000) GS:ffff8a71ffdc0000(0000) knlGS:0000000000000000
[ 2742.872143] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2742.873340] CR2: 0000000000000941 CR3: 000000042bc20006 CR4: 00000000001606e0
[ 2742.874821] Call Trace:
[ 2742.875358]  ops_init+0x38/0xf0
[ 2742.876078]  setup_net+0xd9/0x1f0
[ 2742.876789]  copy_net_ns+0xb7/0x130
[ 2742.877538]  create_new_namespaces+0x11a/0x1d0
[ 2742.878525]  unshare_nsproxy_namespaces+0x55/0xa0
[ 2742.879526]  ksys_unshare+0x1a7/0x330
[ 2742.880313]  __x64_sys_unshare+0xe/0x20
[ 2742.881131]  do_syscall_64+0x5b/0x180
[ 2742.881933]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reproduce:
echo 1 > /proc/sys/net/core/fb_tunnels_only_for_init_net
modprobe ip_vti
unshare -n

Fixes: 79134e6ce2c9 ("net: do not create fallback tunnels for non-default namespaces")
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

r8169: don't use MSI-X on RTL8106e

Found the ethernet network on ASUS X441UAR doesn't come back on resume
from suspend when using MSI-X.  The chip is RTL8106e - version 39.

[   21.848357] libphy: r8169: probed
[   21.848473] r8169 0000:02:00.0 eth0: RTL8106e, 0c:9d:92:32:67:b4, XID
44900000, IRQ 127
[   22.518860] r8169 0000:02:00.0 enp2s0: renamed from eth0
[   29.458041] Generic PHY r8169-200:00: attached PHY driver [Generic
PHY] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)
[   63.227398] r8169 0000:02:00.0 enp2s0: Link is Up - 100Mbps/Full -
flow control off
[  124.514648] Generic PHY r8169-200:00: attached PHY driver [Generic
PHY] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)

Here is the ethernet controller in detail:

02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [10ec:8136]
(rev 07)
Subsystem: ASUSTeK Computer Inc. RTL810xE PCI Express Fast
Ethernet controller [1043:200f]
Flags: bus master, fast devsel, latency 0, IRQ 16
I/O ports at e000 [size=256]
Memory at ef100000 (64-bit, non-prefetchable) [size=4K]
Memory at e0000000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169

Falling back to MSI fixes the issue.

Fixes: 6c6aa15fdea5 ("r8169: improve interrupt handling")
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: lan743x_ptp: convert to ktime_get_clocktai_ts64

timekeeping_clocktai64() has been renamed to ktime_get_clocktai_ts64()
for consistency with the other ktime_get_* access functions.

Rename the new caller that has come up as well.

Question: this is the only ptp driver that sets the hardware time
to the current system time in TAI. Why does it do that?

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sched: always disable bh when taking tcf_lock

Recently, ops->init() and ops->dump() of all actions were modified to
always obtain tcf_lock when accessing private action state. Actions that
don't depend on tcf_lock for synchronization with their data path use
non-bh locking API. However, tcf_lock is also used to protect rate
estimator stats in softirq context by timer callback.

Change ops->init() and ops->dump() of all actions to disable bh when using
tcf_lock to prevent deadlock reported by following lockdep warning:

[  105.470398] ================================
[  105.475014] WARNING: inconsistent lock state
[  105.479628] 4.18.0-rc8+ #664 Not tainted
[  105.483897] --------------------------------
[  105.488511] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
[  105.494871] swapper/16/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
[  105.500449] 00000000f86c012e (&(&p->tcfa_lock)->rlock){+.?.}, at: est_fetch_counters+0x3c/0xa0
[  105.509696] {SOFTIRQ-ON-W} state was registered at:
[  105.514925]   _raw_spin_lock+0x2c/0x40
[  105.519022]   tcf_bpf_init+0x579/0x820 [act_bpf]
[  105.523990]   tcf_action_init_1+0x4e4/0x660
[  105.528518]   tcf_action_init+0x1ce/0x2d0
[  105.532880]   tcf_exts_validate+0x1d8/0x200
[  105.537416]   fl_change+0x55a/0x268b [cls_flower]
[  105.542469]   tc_new_tfilter+0x748/0xa20
[  105.546738]   rtnetlink_rcv_msg+0x56a/0x6d0
[  105.551268]   netlink_rcv_skb+0x18d/0x200
[  105.555628]   netlink_unicast+0x2d0/0x370
[  105.559990]   netlink_sendmsg+0x3b9/0x6a0
[  105.564349]   sock_sendmsg+0x6b/0x80
[  105.568271]   ___sys_sendmsg+0x4a1/0x520
[  105.572547]   __sys_sendmsg+0xd7/0x150
[  105.576655]   do_syscall_64+0x72/0x2c0
[  105.580757]   entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  105.586243] irq event stamp: 489296
[  105.590084] hardirqs last  enabled at (489296): [<ffffffffb507e639>] _raw_spin_unlock_irq+0x29/0x40
[  105.599765] hardirqs last disabled at (489295): [<ffffffffb507e745>] _raw_spin_lock_irq+0x15/0x50
[  105.609277] softirqs last  enabled at (489292): [<ffffffffb413a6a3>] irq_enter+0x83/0xa0
[  105.618001] softirqs last disabled at (489293): [<ffffffffb413a800>] irq_exit+0x140/0x190
[  105.626813]
               other info that might help us debug this:
[  105.633976]  Possible unsafe locking scenario:

[  105.640526]        CPU0
[  105.643325]        ----
[  105.646125]   lock(&(&p->tcfa_lock)->rlock);
[  105.650747]   <Interrupt>
[  105.653717]     lock(&(&p->tcfa_lock)->rlock);
[  105.658514]
                *** DEADLOCK ***

[  105.665349] 1 lock held by swapper/16/0:
[  105.669629]  #0: 00000000a640ad99 ((&est->timer)){+.-.}, at: call_timer_fn+0x10b/0x550
[  105.678200]
               stack backtrace:
[  105.683194] CPU: 16 PID: 0 Comm: swapper/16 Not tainted 4.18.0-rc8+ #664
[  105.690249] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017
[  105.698626] Call Trace:
[  105.701421]  <IRQ>
[  105.703791]  dump_stack+0x92/0xeb
[  105.707461]  print_usage_bug+0x336/0x34c
[  105.711744]  mark_lock+0x7c9/0x980
[  105.715500]  ? print_shortest_lock_dependencies+0x2e0/0x2e0
[  105.721424]  ? check_usage_forwards+0x230/0x230
[  105.726315]  __lock_acquire+0x923/0x26f0
[  105.730597]  ? debug_show_all_locks+0x240/0x240
[  105.735478]  ? mark_lock+0x493/0x980
[  105.739412]  ? check_chain_key+0x140/0x1f0
[  105.743861]  ? __lock_acquire+0x836/0x26f0
[  105.748323]  ? lock_acquire+0x12e/0x290
[  105.752516]  lock_acquire+0x12e/0x290
[  105.756539]  ? est_fetch_counters+0x3c/0xa0
[  105.761084]  _raw_spin_lock+0x2c/0x40
[  105.765099]  ? est_fetch_counters+0x3c/0xa0
[  105.769633]  est_fetch_counters+0x3c/0xa0
[  105.773995]  est_timer+0x87/0x390
[  105.777670]  ? est_fetch_counters+0xa0/0xa0
[  105.782210]  ? lock_acquire+0x12e/0x290
[  105.786410]  call_timer_fn+0x161/0x550
[  105.790512]  ? est_fetch_counters+0xa0/0xa0
[  105.795055]  ? del_timer_sync+0xd0/0xd0
[  105.799249]  ? __lock_is_held+0x93/0x110
[  105.803531]  ? mark_held_locks+0x20/0xe0
[  105.807813]  ? _raw_spin_unlock_irq+0x29/0x40
[  105.812525]  ? est_fetch_counters+0xa0/0xa0
[  105.817069]  ? est_fetch_counters+0xa0/0xa0
[  105.821610]  run_timer_softirq+0x3c4/0x9f0
[  105.826064]  ? lock_acquire+0x12e/0x290
[  105.830257]  ? __bpf_trace_timer_class+0x10/0x10
[  105.835237]  ? __lock_is_held+0x25/0x110
[  105.839517]  __do_softirq+0x11d/0x7bf
[  105.843542]  irq_exit+0x140/0x190
[  105.847208]  smp_apic_timer_interrupt+0xac/0x3b0
[  105.852182]  apic_timer_interrupt+0xf/0x20
[  105.856628]  </IRQ>
[  105.859081] RIP: 0010:cpuidle_enter_state+0xd8/0x4d0
[  105.864395] Code: 46 ff 48 89 44 24 08 0f 1f 44 00 00 31 ff e8 cf ec 46 ff 80 7c 24 07 00 0f 85 1d 02 00 00 e8 9f 90 4b ff fb 66 0f 1f 44 00 00 <4c> 8b 6c 24 08 4d 29 fd 0f 80 36 03 00 00 4c 89 e8 48 ba cf f7 53
[  105.884288] RSP: 0018:ffff8803ad94fd20 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
[  105.892494] RAX: 0000000000000000 RBX: ffffe8fb300829c0 RCX: ffffffffb41e19e1
[  105.899988] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8803ad9358ac
[  105.907503] RBP: ffffffffb6636300 R08: 0000000000000004 R09: 0000000000000000
[  105.914997] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000004
[  105.922487] R13: ffffffffb6636140 R14: ffffffffb66362d8 R15: 000000188d36091b
[  105.929988]  ? trace_hardirqs_on_caller+0x141/0x2d0
[  105.935232]  do_idle+0x28e/0x320
[  105.938817]  ? arch_cpu_idle_exit+0x40/0x40
[  105.943361]  ? mark_lock+0x8c1/0x980
[  105.947295]  ? _raw_spin_unlock_irqrestore+0x32/0x60
[  105.952619]  cpu_startup_entry+0xc2/0xd0
[  105.956900]  ? cpu_in_idle+0x20/0x20
[  105.960830]  ? _raw_spin_unlock_irqrestore+0x32/0x60
[  105.966146]  ? trace_hardirqs_on_caller+0x141/0x2d0
[  105.971391]  start_secondary+0x2b5/0x360
[  105.975669]  ? set_cpu_sibling_map+0x1330/0x1330
[  105.980654]  secondary_startup_64+0xa5/0xb0

Taking tcf_lock in sample action with bh disabled causes lockdep to issue a
warning regarding possible irq lock inversion dependency between tcf_lock,
and psample_groups_lock that is taken when holding tcf_lock in sample init:

[  162.108959]  Possible interrupt unsafe locking scenario:

[  162.116386]        CPU0                    CPU1
[  162.121277]        ----                    ----
[  162.126162]   lock(psample_groups_lock);
[  162.130447]                                local_irq_disable();
[  162.136772]                                lock(&(&p->tcfa_lock)->rlock);
[  162.143957]                                lock(psample_groups_lock);
[  162.150813]   <Interrupt>
[  162.153808]     lock(&(&p->tcfa_lock)->rlock);
[  162.158608]
                *** DEADLOCK ***

In order to prevent potential lock inversion dependency between tcf_lock
and psample_groups_lock, extract call to psample_group_get() from tcf_lock
protected section in sample action init function.

Fixes: 4e232818bd32 ("net: sched: act_mirred: remove dependency on rtnl lock")
Fixes: 764e9a24480f ("net: sched: act_vlan: remove dependency on rtnl lock")
Fixes: 729e01260989 ("net: sched: act_tunnel_key: remove dependency on rtnl lock")
Fixes: d77284956656 ("net: sched: act_sample: remove dependency on rtnl lock")
Fixes: e8917f437006 ("net: sched: act_gact: remove dependency on rtnl lock")
Fixes: b6a2b971c0b0 ("net: sched: act_csum: remove dependency on rtnl lock")
Fixes: 2142236b4584 ("net: sched: act_bpf: remove dependency on rtnl lock")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull first set of KVM updates from Paolo Bonzini:
"PPC:
   - minor code cleanups

  x86:
   - PCID emulation and CR3 caching for shadow page tables
   - nested VMX live migration
   - nested VMCS shadowing
   - optimized IPI hypercall
   - some optimizations

  ARM will come next week"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (85 commits)
  kvm: x86: Set highest physical address bits in non-present/reserved SPTEs
  KVM/x86: Use CC_SET()/CC_OUT in arch/x86/kvm/vmx.c
  KVM: X86: Implement PV IPIs in linux guest
  KVM: X86: Add kvm hypervisor init time platform setup callback
  KVM: X86: Implement "send IPI" hypercall
  KVM/x86: Move X86_CR4_OSXSAVE check into kvm_valid_sregs()
  KVM: x86: Skip pae_root shadow allocation if tdp enabled
  KVM/MMU: Combine flushing remote tlb in mmu_set_spte()
  KVM: vmx: skip VMWRITE of HOST_{FS,GS}_BASE when possible
  KVM: vmx: skip VMWRITE of HOST_{FS,GS}_SEL when possible
  KVM: vmx: always initialize HOST_{FS,GS}_BASE to zero during setup
  KVM: vmx: move struct host_state usage to struct loaded_vmcs
  KVM: vmx: compute need to reload FS/GS/LDT on demand
  KVM: nVMX: remove a misleading comment regarding vmcs02 fields
  KVM: vmx: rename __vmx_load_host_state() and vmx_save_host_state()
  KVM: vmx: add dedicated utility to access guest's kernel_gs_base
  KVM: vmx: track host_state.loaded using a loaded_vmcs pointer
  KVM: vmx: refactor segmentation code in vmx_save_host_state()
  kvm: nVMX: Fix fault priority for VMX operations
  kvm: nVMX: Fix fault vector for VMX operation at CPL > 0
  ...

Merge tag 'riscv-for-linus-4.19-mw0' of git://git./linux/kernel/git/palmer/riscv-linux

Pull RISC-V updates from Palmer Dabbelt:
"This contains some major improvements to the RISC-V port, including
  the necessary interrupt controller and timer support to actually make
  it to userspace. Support for three devices has been added:

   - the ISA-mandated timers on RISC-V systems.

   - the ISA-mandated first-level interrupt controller on RISC-V
     systems, which is handled as part of our core arch code because
     it's very small and tightly tied to the ISA.

   - SiFive's platform-level interrupt controller, which talks to the
     actual devices.

  In addition to these new devices, there are a handful of cleanups all
  over the RISC-V tree:

   - build fixes for various configurations:
      * A fix to the vDSO build's makefile so it respects CFLAGS.
      * The addition of __lshrti3, a libgcc derived function necessary
        for some 32-bit configurations.
      * !SMP && PERF_EVENTS

   - Cleanups to the arch code to remove the remnants of old versions of
     the drivers that were just properly submitted.
      * Some dead code from the timer driver, most of which wasn't ever
        even compiled.
      * Cleanups of some interrupt #defines, which are now local to the
        interrupt handling code.

   - Fixes to ptrace(), which while not being sufficient to fully make
     GDB work are at least sufficient to get simple GDB tasks to work.

   - Early printk support via RISC-V's architecturally mandated SBI
     console device.

   - A fix to our early debug trap handler to ensure it's always
     aligned.

  These patches have all been through a fairly extensive review process,
  but as this enables a whole pile of functionality (ie, userspace) I'm
  confident we'll need to submit a few more patches. The only concrete
  issues I know about are the sys_riscv_flush_icache patches, but as I
  managed to screw those up on Friday I figured it'd be best to let them
  bake another week.

  This tag boots a Fedora root filesystem on QEMU's master branch for
  me, and before this morning's rebase (from 4.18-rc8 to 4.18) it booted
  on the HiFive Unleashed.

  Thanks to Christoph Hellwig and the other guys at WD for getting the
  new drivers in shape!"

* tag 'riscv-for-linus-4.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
  dt-bindings: interrupt-controller: SiFive Plaform Level Interrupt Controller
  dt-bindings: interrupt-controller: RISC-V local interrupt controller
  RISC-V: Fix !CONFIG_SMP compilation error
  irqchip: add a SiFive PLIC driver
  RISC-V: Add the directive for alignment of stvec's value
  clocksource: new RISC-V SBI timer driver
  RISC-V: implement low-level interrupt handling
  RISC-V: add a definition for the SIE SEIE bit
  RISC-V: remove INTERRUPT_CAUSE_* defines from asm/irq.h
  RISC-V: simplify software interrupt / IPI code
  RISC-V: remove timer leftovers
  RISC-V: Add early printk support via the SBI console
  RISC-V: Don't increment sepc after breakpoint.
  RISC-V: implement __lshrti3.
  RISC-V: Use KBUILD_CFLAGS instead of KCFLAGS when building the vDSO

Merge tag 'char-misc-4.19-rc1' of git://git./linux/kernel/git/gregkh/char-misc

Pull UIO fix from Greg KH:
"Here is a single UIO fix that I forgot to send before 4.18-final came
  out. It reverts a UIO patch that went in the 4.18 development window
  that was causing problems.

  This patch has been in linux-next for a while with no problems, I just
  forgot to send it earlier, or as part of the larger char/misc patch
  series from yesterday, my fault"

* tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  Revert "uio: use request_threaded_irq instead"

Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

- a new driver for Rohm BU21029 touch controller

- new bitmap APIs: bitmap_alloc, bitmap_zalloc and bitmap_free

- updates to Atmel, eeti. pxrc and iforce drivers

- assorted driver cleanups and fixes.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits)
  MAINTAINERS: Add PhoenixRC Flight Controller Adapter
  Input: do not use WARN() in input_alloc_absinfo()
  Input: mark expected switch fall-throughs
  Input: raydium_i2c_ts - use true and false for boolean values
  Input: evdev - switch to bitmap API
  Input: gpio-keys - switch to bitmap_zalloc()
  Input: elan_i2c_smbus - cast sizeof to int for comparison
  bitmap: Add bitmap_alloc(), bitmap_zalloc() and bitmap_free()
  md: Avoid namespace collision with bitmap API
  dm: Avoid namespace collision with bitmap API
  Input: pm8941-pwrkey - add resin entry
  Input: pm8941-pwrkey - abstract register offsets and event code
  Input: iforce - reorganize joystick configuration lists
  Input: atmel_mxt_ts - move completion to after config crc is updated
  Input: atmel_mxt_ts - don't report zero pressure from T9
  Input: atmel_mxt_ts - zero terminate config firmware file
  Input: atmel_mxt_ts - refactor config update code to add context struct
  Input: atmel_mxt_ts - config CRC may start at T71
  Input: atmel_mxt_ts - remove unnecessary debug on ENOMEM
  Input: atmel_mxt_ts - remove duplicate setup of ABS_MT_PRESSURE
  ...

Merge tag 'hwlock-v4.19' of git://github.com/andersson/remoteproc

Pull hwspinlock updates from Bjorn Andersson:
"This introduces devres helpers and an API to request a lock by name,
  then migrates the sprd SPI driver to use these"

* tag 'hwlock-v4.19' of git://github.com/andersson/remoteproc:
  hwspinlock: Fix incorrect return pointers
  spi: sprd: Change to use devm_hwspin_lock_request_specific()
  spi: sprd: Replace of_hwspin_lock_get_id() with of_hwspin_lock_get_id_byname()
  hwspinlock: Fix one comment mistake
  hwspinlock: Remove redundant config
  hwspinlock: Add devm_xxx() APIs to register/unregister one hwlock controller
  hwspinlock: Add devm_xxx() APIs to request/free hwlock
  hwspinlock: Add one new API to support getting a specific hwlock by the name

Merge tag 'rpmsg-v4.19' of git://github.com/andersson/remoteproc

Pull rpmsg updates from Bjorn Andersson:
"This fixes a few compile and kerneldoc warnings, allows rpmsg devices
  to handle power domains, allow for labeling GLINK edges and supports
  compat for rpmsg_char"

* tag 'rpmsg-v4.19' of git://github.com/andersson/remoteproc:
  rpmsg: Add compat ioctl for rpmsg char driver
  rpmsg: glink: Store edge name for glink device
  dt-bindings: soc: qcom: Add label for GLINK bindings
  rpmsg: core: add support to power domains for devices
  rpmsg: smd: fix kerneldoc warnings
  rpmsg: glink: Fix various kerneldoc warnings.
  rpmsg: glink: correctly annotate intent members
  rpmsg: smd: Add missing include of sizes.h

Merge tag 'rproc-v4.19' of git://github.com/andersson/remoteproc

Pull remoteproc updates from Bjorn Andersson:
"This adds support for pre-start and post-shutdown hooks for remoteproc
  subdevices, refactors the Qualcomm Hexagon support to allow reuse
  between several drivers, makes authentication in the MDT file loader
  optional, migrates a few format strings to use %pK and migrates the
  Davinci driver to use the reset framework"

* tag 'rproc-v4.19' of git://github.com/andersson/remoteproc:
  remoteproc/davinci: use the reset framework
  remoteproc/davinci: Mark error recovery as disabled
  remoteproc: st_slim: replace "%p" with "%pK"
  remoteproc: replace "%p" with "%pK"
  remoteproc: qcom: fix Q6V5_WCSS dependencies
  remoteproc: Reset table_ptr in rproc_start() failure paths
  remoteproc: qcom: q6v5-pil: fix modem hang on SDM845 after axis2 clk unvote
  remoteproc: qcom q6v5: fix modular build
  remoteproc: Introduce prepare and unprepare for subdevices
  remoteproc: rename subdev probe and remove functions
  remoteproc: Make client initialize ops in rproc_subdev
  remoteproc: Make start and stop in subdev optional
  remoteproc: Rename subdev functions to start/stop
  remoteproc: qcom: Introduce Hexagon V5 based WCSS driver
  remoteproc: qcom: q6v5-pil: Use common q6v5 helpers
  remoteproc: qcom: adsp: Use common q6v5 helpers
  remoteproc: q6v5: Extract common resource handling
  remoteproc: qcom: mdt_loader: Make the firmware authentication optional

Merge tag 'linux-watchdog-4.19-rc1' of git://linux-watchdog.org/linux-watchdog

Pull watchdog updates from Wim Van Sebroeck:

- add MEN 16z069 IP-Core driver

- renesas-wdt: add support for the R8A77990 wdt

- stm32_iwdg: Add stm32mp1 support and pclk feature

- sp805_wdt, orion_wdt, sprd_wdt: several improvements

- imx2_wdt, stmp3xxx: switch to SPDX identifier

* tag 'linux-watchdog-4.19-rc1' of git://www.linux-watchdog.org/linux-watchdog:
  watchdog: fix dependencies of menz69_wdt.o
  watchdog: sp805: Add clock-frequency property
  watchdog: add driver for the MEN 16z069 IP-Core
  watchdog: sprd_wdt: Remove redundant dev_err call in sprd_wdt_probe()
  watchdog: stmp3xxx: Switch to SPDX identifier
  watchdog: imx2_wdt: Switch to SPDX identifier
  watchdog: sp805: set WDOG_HW_RUNNING when appropriate
  watchdog: sp805: add 'timeout-sec' DT property support
  dt-bindings: watchdog: Add optional 'timeout-sec' property for sp805
  dt-bindings: watchdog: Consolidate SP805 binding docs
  watchdog: orion_wdt: Mark watchdog as active when running at probe
  watchdog: stm32: add pclk feature for stm32mp1
  dt-bindings: watchdog: add stm32mp1 support
  dt-bindings: watchdog: renesas-wdt: Add support for the R8A77990 wdt

Merge tag 'dmaengine-4.19-rc1' of git://git.infradead.org/users/vkoul/slave-dma

Pull DMAengine updates from Vinod Koul:
"This round brings couple of framework changes, a new driver and usual
  driver updates:

   - new managed helper for dmaengine framework registration

   - split dmaengine pause capability to pause and resume and allow
     drivers to report that individually

   - update dma_request_chan_by_mask() to handle deferred probing

   - move imx-sdma to use virt-dma

   - new driver for Actions Semi Owl family S900 controller

   - minor updates to intel, renesas, mv_xor, pl330 etc"

* tag 'dmaengine-4.19-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (46 commits)
  dmaengine: Add Actions Semi Owl family S900 DMA driver
  dt-bindings: dmaengine: Add binding for Actions Semi Owl SoCs
  dmaengine: sh: rcar-dmac: Should not stop the DMAC by rcar_dmac_sync_tcr()
  dmaengine: mic_x100_dma: use the new helper to simplify the code
  dmaengine: add a new helper dmaenginem_async_device_register
  dmaengine: imx-sdma: add memcpy interface
  dmaengine: imx-sdma: add SDMA_BD_MAX_CNT to replace '0xffff'
  dmaengine: dma_request_chan_by_mask() to handle deferred probing
  dmaengine: pl330: fix irq race with terminate_all
  dmaengine: Revert "dmaengine: mv_xor_v2: enable COMPILE_TEST"
  dmaengine: mv_xor_v2: use {lower,upper}_32_bits to configure HW descriptor address
  dmaengine: mv_xor_v2: enable COMPILE_TEST
  dmaengine: mv_xor_v2: move unmap to before callback
  dmaengine: mv_xor_v2: convert callback to helper function
  dmaengine: mv_xor_v2: kill the tasklets upon exit
  dmaengine: mv_xor_v2: explicitly freeup irq
  dmaengine: sh: rcar-dmac: Add dma_pause operation
  dmaengine: sh: rcar-dmac: add a new function to clear CHCR.DE with barrier
  dmaengine: idma64: Support dmaengine_terminate_sync()
  dmaengine: hsu: Support dmaengine_terminate_sync()
  ...

Merge tag 'mmc-v4.19' of git://git./linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
"Updates for MMC for v4.19.

  MMC core:
   - Add some fine-grained hooks to further support HS400 tuning
   - Improve error path for bus width setting for HS400es
   - Use a common method when checking R1 status

  MMC host:
   - renesas_sdhi: Add r8a77990 support
   - renesas_sdhi: Add eMMC HS400 mode support
   - tmio/renesas_sdhi: Improve tuning/clock management
   - tmio: Add eMMC HS400 mode support
   - sunxi: Add support for 3.3V eMMC DDR mode
   - mmci: Initial support to manage variant specific callbacks
   - sdhci: Don't try 3.3V I/O voltage if not supported
   - sdhci-pci-dwc-mshc: Add driver to support Synopsys dwc mshc SDHCI PCI
   - sdhci-of-dwcmshc: Add driver to support Synopsys DWC MSHC SDHCI
   - sdhci-msm: Add support for new version sdcc V5
   - sdhci-pci-o2micro: Add support for O2 eMMC HS200 mode
   - sdhci-pci-o2micro: Add support for O2 hardware tuning
   - sdhci-pci-o2micro: Add MSI interrupt support for O2 SD host
   - sdhci-pci: Add support for Intel ICP
   - sdhci-tegra: Prevent ACMD23 and HS200 mode on Tegra 3
   - sdhci-tegra: Fix eMMC DDR52 mode
   - sdhci-tegra: Improve clock management
   - dw_mmc-rockchip: Document compatible string for px30
   - sdhci-esdhc-imx: Add support for 3.3V eMMC DDR mode
   - sdhci-of-esdhc: Set proper DMA mask for ls104x chips
   - sdhci-of-esdhc: Improve clock management
   - sdhci-of-arasan: Add a quirk to manage unstable clocks
   - dw_mmc-exynos: Address potential external abort during system resume
   - pxamci: Add support for common MMC DT bindings
   - pxamci: Several cleanups and improvements
   - pxamci: Merge immutable branch for pxa to switch to DMA slave maps"

* tag 'mmc-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (56 commits)
  mmc: core: improve reasonableness of bus width setting for HS400es
  mmc: tmio: remove unneeded variable in tmio_mmc_start_command()
  mmc: renesas_sdhi: Fix sampling clock position selecting
  mmc: tmio: Fix tuning flow
  mmc: sunxi: remove output of virtual base address
  dt-bindings: mmc: rockchip-dw-mshc: add description for px30
  mmc: renesas_sdhi: Add r8a77990 support
  mmc: sunxi: allow 3.3V DDR when DDR is available
  mmc: mmci: Add and implement a ->dma_setup() callback for qcom dml
  mmc: mmci: Initial support to manage variant specific callbacks
  mmc: tegra: Force correct divider calculation on DDR50/52
  mmc: sdhci: Add MSI interrupt support for O2 SD host
  mmc: sdhci: Add support for O2 hardware tuning
  mmc: sdhci: Export sdhci tuning function symbol
  mmc: sdhci: Change O2 Host HS200 mode clock frequency to 200MHz
  mmc: sdhci: Add support for O2 eMMC HS200 mode
  mmc: tegra: Add and use tegra_sdhci_get_max_clock()
  mmc: sdhci-esdhc-imx: fix indent
  mmc: sdhci-esdhc-imx: disable clocks before changing frequency
  mmc: tegra: prevent ACMD23 on Tegra 3
  ...

ip6_vti: simplify stats handling in vti6_xmit

Same as ip_vti, use iptunnel_xmit_stats to updates stats in tunnel xmit
code path.

Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

pcmcia: remove long deprecated pcmcia_request_exclusive_irq() function

This function was created as a deprecated fallback case back in 2010 by
commit eb14120f743d ("pcmcia: re-work pcmcia_request_irq()") for legacy
cases.

Actual in-kernel users haven't been around for a long while. The last
in-kernel user was apparently removed four years ago by commit
5f5316fcd08e ("am2150: Update nmclan_cs.c to use update PCMCIA API").

Just remove it entirely.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

deprecate the '__deprecated' attribute warnings entirely and for good

We haven't had lots of deprecation warnings lately, but the rdma use of
it made them flare up again.

They are not useful.  They annoy everybody, and nobody ever does
anything about them, because it's always "somebody elses problem".  And
when people start thinking that warnings are normal, they stop looking
at them, and the real warnings that mean something go unnoticed.

If you want to get rid of a function, just get rid of it.  Convert every
user to the new world order.

And if you can't do that, then don't annoy everybody else with your
marking that says "I couldn't be bothered to fix this, so I'll just spam
everybody elses build logs with warnings about my laziness".

Make a kernelnewbies wiki page about things that could be cleaned up,
write a blog post about it, or talk to people on the mailing lists.  But
don't add warnings to the kernel build about cleanup that you think
should happen but you aren't doing yourself.

Don't.  Just don't.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'driver-core-4.19-rc1' of git://git./linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
"Here are all of the driver core and related patches for 4.19-rc1.

  Nothing huge here, just a number of small cleanups and the ability to
  now stop the deferred probing after init happens.

  All of these have been in linux-next for a while with only a merge
  issue reported"

* tag 'driver-core-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (21 commits)
  base: core: Remove WARN_ON from link dependencies check
  drivers/base: stop new probing during shutdown
  drivers: core: Remove glue dirs from sysfs earlier
  driver core: remove unnecessary function extern declare
  sysfs.h: fix non-kernel-doc comment
  PM / Domains: Stop deferring probe at the end of initcall
  iommu: Remove IOMMU_OF_DECLARE
  iommu: Stop deferring probe at end of initcalls
  pinctrl: Support stopping deferred probe after initcalls
  dt-bindings: pinctrl: add a 'pinctrl-use-default' property
  driver core: allow stopping deferred probe after init
  driver core: add a debugfs entry to show deferred devices
  sysfs: Fix internal_create_group() for named group updates
  base: fix order of OF initialization
  linux/device.h: fix kernel-doc notation warning
  Documentation: update firmware loader fallback reference
  kobject: Replace strncpy with memcpy
  drivers: base: cacheinfo: use OF property_read_u32 instead of get_property,read_number
  kernfs: Replace strncpy with memcpy
  device: Add #define dev_fmt similar to #define pr_fmt
  ...

Merge tag 'char-misc-4.19-rc1' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
"Here is the bit set of char/misc drivers for 4.19-rc1

  There is a lot here, much more than normal, seems like everyone is
  writing new driver subsystems these days... Anyway, major things here
  are:

   - new FSI driver subsystem, yet-another-powerpc low-level hardware
     bus

   - gnss, finally an in-kernel GPS subsystem to try to tame all of the
     crazy out-of-tree drivers that have been floating around for years,
     combined with some really hacky userspace implementations. This is
     only for GNSS receivers, but you have to start somewhere, and this
     is great to see.

  Other than that, there are new slimbus drivers, new coresight drivers,
  new fpga drivers, and loads of DT bindings for all of these and
  existing drivers.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits)
  android: binder: Rate-limit debug and userspace triggered err msgs
  fsi: sbefifo: Bump max command length
  fsi: scom: Fix NULL dereference
  misc: mic: SCIF Fix scif_get_new_port() error handling
  misc: cxl: changed asterisk position
  genwqe: card_base: Use true and false for boolean values
  misc: eeprom: assignment outside the if statement
  uio: potential double frees if __uio_register_device() fails
  eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency
  misc: ti-st: Fix memory leak in the error path of probe()
  android: binder: Show extra_buffers_size in trace
  firmware: vpd: Fix section enabled flag on vpd_section_destroy
  platform: goldfish: Retire pdev_bus
  goldfish: Use dedicated macros instead of manual bit shifting
  goldfish: Add missing includes to goldfish.h
  mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux
  dt-bindings: mux: add adi,adgs1408
  Drivers: hv: vmbus: Cleanup synic memory free path
  Drivers: hv: vmbus: Remove use of slow_virt_to_phys()
  Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind()
  ...

Merge tag 'staging-4.19-rc1' of git://git./linux/kernel/git/gregkh/staging

Pull staging and IIO updates from Greg KH:
"Here are the big staging/iio patches for 4.19-rc1.

  Lots of churn here, with tons of cleanups happening in staging
  drivers, a removal of an old crypto driver that no one was using
  (skein), and the addition of some new IIO drivers. Also added was a
  "gasket" driver from Google that needs loads of work and the erofs
  filesystem.

  Even with adding all of the new drivers and a new filesystem, we are
  only adding about 1000 lines overall to the kernel linecount, which
  shows just how much cleanup happened, and how big the unused crypto
  driver was.

  All of these have been in the linux-next tree for a while now with no
  reported issues"

* tag 'staging-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (903 commits)
  staging:rtl8192u: Remove unused macro definitions - Style
  staging:rtl8192u: Add spaces around '+' operator - Style
  staging:rtl8192u: Remove stale comment - Style
  staging: rtl8188eu: remove unused mp_custom_oid.h
  staging: fbtft: Add spaces around / - Style
  staging: fbtft: Erases some repetitive usage of function name - Style
  staging: fbtft: Adjust some empty-line problems - Style
  staging: fbtft: Removes one nesting level to help readability - Style
  staging: fbtft: Changes gamma table to define.
  staging: fbtft: A bit more information on dev_err.
  staging: fbtft: Fixes some alignment issues - Style
  staging: fbtft: Puts macro arguments in parenthesis to avoid precedence issues - Style
  staging: rtl8188eu: remove unused array dB_Invert_Table
  staging: rtl8188eu: remove whitespace, add missing blank line
  staging: rtl8188eu: use is_multicast_ether_addr in rtw_sta_mgt.c
  staging: rtl8188eu: remove whitespace - style
  staging: rtl8188eu: cleanup block comment - style
  staging: rtl8188eu: use is_multicast_ether_addr in rtl8188eu_xmit.c
  staging: rtl8188eu: use is_multicast_ether_addr in recv_linux.c
  staging: rtlwifi: refactor rtl_get_tcb_desc
  ...

Merge tag 'tty-4.19-rc1' of git://git./linux/kernel/git/gregkh/tty

Pull tty/serial driver updates from Greg KH:
"Here is the big tty and serial driver pull request for 4.19-rc1.

  It's not all that big, just a number of small serial driver updates
  and fixes, along with some better vt handling for unicode characters
  for those using braille terminals.

  All of these patches have been in linux-next for a long time with no
  reported issues"

* tag 'tty-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (73 commits)
  tty: serial: 8250: Revert NXP SC16C2552 workaround
  serial: 8250_exar: Read INT0 from slave device, too
  tty: rocket: Fix possible buffer overwrite on register_PCI
  serial: 8250_dw: Add ACPI support for uart on Broadcom SoC
  serial: 8250_dw: always set baud rate in dw8250_set_termios
  dt-bindings: serial: Add binding for uartlite
  tty: serial: uartlite: Add support for suspend and resume
  tty: serial: uartlite: Add clock adaptation
  tty: serial: uartlite: Add structure for private data
  serial: sh-sci: Improve support for separate TEI and DRI interrupts
  serial: sh-sci: Remove SCIx_RZ_SCIFA_REGTYPE
  serial: sh-sci: Allow for compressed SCIF address
  serial: sh-sci: Improve interrupts description
  serial: 8250: Use cached port name directly in messages
  serial: 8250_exar: Drop unused variable in pci_xr17v35x_setup()
  vt: drop unused struct vt_struct
  vt: avoid a VLA in the unicode screen scroll function
  vt: add /dev/vcsu* to devices.txt
  vt: coherence validation code for the unicode screen buffer
  vt: selection: take screen contents from uniscr if available
  ...

Merge tag 'usb-4.19-rc1' of git://git./linux/kernel/git/gregkh/usb

Pull USB/PHY updates from Greg KH:
"Here is the big USB and phy driver patch set for 4.19-rc1.

  Nothing huge but there was a lot of work that happened this
  development cycle:

   - lots of type-c work, with drivers graduating out of staging, and
     displayport support being added.

   - new PHY drivers

   - the normal collection of gadget driver updates and fixes

   - code churn to work on the urb handling path, using irqsave()
     everywhere in anticipation of making this codepath a lot simpler in
     the future.

   - usbserial driver fixes and reworks

   - other misc changes

  All of these have been in linux-next with no reported issues for a
  while"

* tag 'usb-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (159 commits)
  USB: serial: pl2303: add a new device id for ATEN
  usb: renesas_usbhs: Kconfig: convert to SPDX identifiers
  usb: dwc3: gadget: Check MaxPacketSize from descriptor
  usb: dwc2: Turn on uframe_sched on "stm32f4x9_fsotg" platforms
  usb: dwc2: Turn on uframe_sched on "amlogic" platforms
  usb: dwc2: Turn on uframe_sched on "his" platforms
  usb: dwc2: Turn on uframe_sched on "bcm" platforms
  usb: dwc2: gadget: ISOC's starting flow improvement
  usb: dwc2: Make dwc2_readl/writel functions endianness-agnostic.
  usb: dwc3: core: Enable AutoRetry feature in the controller
  usb: dwc3: Set default mode for dwc_usb31
  usb: gadget: udc: renesas_usb3: Add register of usb role switch
  usb: dwc2: replace ioread32/iowrite32_rep with dwc2_readl/writel_rep
  usb: dwc2: Modify dwc2_readl/writel functions prototype
  usb: dwc3: pci: Intel Merrifield can be host
  usb: dwc3: pci: Supply device properties via driver data
  arm64: dts: dwc3: description of incr burst type
  usb: dwc3: Enable undefined length INCR burst type
  usb: dwc3: add global soc bus configuration reg0
  usb: dwc3: Describe 'wakeup_work' field of struct dwc3_pci
  ...

Merge git://git./pub/scm/linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
pull-request: bpf 2018-08-18

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix a BPF selftest failure in test_cgroup_storage due to rlimit
   restrictions, from Yonghong.

2) Fix a suspicious RCU rcu_dereference_check() warning triggered
   from removing a device's XDP memory allocator by using the correct
   rhashtable lookup function, from Tariq.

3) A batch of BPF sockmap and ULP fixes mainly fixing leaks and races
   as well as enforcing module aliases for ULPs. Another fix for BPF
   map redirect to make them work again with tail calls, from Daniel.

4) Fix XDP BPF samples to unload their programs upon SIGTERM, from Jesper.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./pub/scm/linux/kernel/git/pablo/nf

Pablo Neira Ayuso says:

====================
Netfilter/IPVS fixes for net

The following patchset contains Netfilter/IPVS fixes for your net tree:

1) Infinite loop in IPVS when net namespace is released, from
   Tan Hu.

2) Do not show negative timeouts in ip_vs_conn by using the new
   jiffies_delta_to_msecs(), patches from Matteo Croce.

3) Set F_IFACE flag for linklocal addresses in ip6t_rpfilter,
   from Florian Westphal.

4) Fix overflow in set size allocation, from Taehee Yoo.

5) Use netlink_dump_start() from ctnetlink to fix memleak from
   the error path, again from Florian.

6) Register nfnetlink_subsys in last place, otherwise netns
   init path may lose race and see net->nft uninitialized data.
   This also reverts previous attempt to fix this by increase
   netns refcount, patches from Florian.

7) Remove conntrack entries on layer 4 protocol tracker module
   removal, from Florian.

8) Use GFP_KERNEL_ACCOUNT for xtables blob allocation, from
   Michal Hocko.

9) Get tproxy documentation in sync with existing codebase,
   from Mate Eckl.

10) Honor preset layer 3 protocol via ctx->family in the new nft_ct
    timeout infrastructure, from Harsha Sharma.

11) Let uapi nfnetlink_osf.h compile standalone with no errors,
    from Dmitry V. Levin.

12) Missing braces compilation warning in nft_tproxy, patch from
    Mate Eclk.

13) Disregard bogus check to bail out on non-anonymous sets from
    the dynamic set update extension.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag '9p-for-4.19-2' of git://github.com/martinetd/linux

Pull 9p updates from Dominique Martinet:
"This contains mostly fixes (6 to be backported to stable) and a few
  changes, here is the breakdown:

   - rework how fids are attributed by replacing some custom tracking in
     a list by an idr

   - for packet-based transports (virtio/rdma) validate that the packet
     length matches what the header says

   - a few race condition fixes found by syzkaller

   - missing argument check when NULL device is passed in sys_mount

   - a few virtio fixes

   - some spelling and style fixes"

* tag '9p-for-4.19-2' of git://github.com/martinetd/linux: (21 commits)
  net/9p/trans_virtio.c: add null terminal for mount tag
  9p/virtio: fix off-by-one error in sg list bounds check
  9p: fix whitespace issues
  9p: fix multiple NULL-pointer-dereferences
  fs/9p/xattr.c: catch the error of p9_client_clunk when setting xattr failed
  9p: validate PDU length
  net/9p/trans_fd.c: fix race by holding the lock
  net/9p/trans_fd.c: fix race-condition by flushing workqueue before the kfree()
  net/9p/virtio: Fix hard lockup in req_done
  net/9p/trans_virtio.c: fix some spell mistakes in comments
  9p/net: Fix zero-copy path in the 9p virtio transport
  9p: Embed wait_queue_head into p9_req_t
  9p: Replace the fidlist with an IDR
  9p: Change p9_fid_create calling convention
  9p: Fix comment on smp_wmb
  net/9p/client.c: version pointer uninitialized
  fs/9p/v9fs.c: fix spelling mistake "Uknown" -> "Unknown"
  net/9p: fix error path of p9_virtio_probe
  9p/net/protocol.c: return -ENOMEM when kmalloc() failed
  net/9p/client.c: add missing '\n' at the end of p9_debug()
  ...

Merge branch 'akpm' (patches from Andrew)

Merge updates from Andrew Morton:

- a few misc things

- a few Y2038 fixes

- ntfs fixes

- arch/sh tweaks

- ocfs2 updates

- most of MM

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (111 commits)
  mm/hmm.c: remove unused variables align_start and align_end
  fs/userfaultfd.c: remove redundant pointer uwq
  mm, vmacache: hash addresses based on pmd
  mm/list_lru: introduce list_lru_shrink_walk_irq()
  mm/list_lru.c: pass struct list_lru_node* as an argument to __list_lru_walk_one()
  mm/list_lru.c: move locking from __list_lru_walk_one() to its caller
  mm/list_lru.c: use list_lru_walk_one() in list_lru_walk_node()
  mm, swap: make CONFIG_THP_SWAP depend on CONFIG_SWAP
  mm/sparse: delete old sparse_init and enable new one
  mm/sparse: add new sparse_init_nid() and sparse_init()
  mm/sparse: move buffer init/fini to the common place
  mm/sparse: use the new sparse buffer functions in non-vmemmap
  mm/sparse: abstract sparse buffer allocations
  mm/hugetlb.c: don't zero 1GiB bootmem pages
  mm, page_alloc: double zone's batchsize
  mm/oom_kill.c: document oom_lock
  mm/hugetlb: remove gigantic page support for HIGHMEM
  mm, oom: remove sleep from under oom_lock
  kernel/dma: remove unsupported gfp_mask parameter from dma_alloc_from_contiguous()
  mm/cma: remove unsupported gfp_mask parameter from cma_alloc()
  ...

mm/hmm.c: remove unused variables align_start and align_end

Variables align_start and align_end are being assigned but are never
used hence they are redundant and can be removed.

Cleans up clang warnings:
warning: variable 'align_start' set but not used [-Wunused-but-set-variable]
warning: variable 'align_size' set but not used [-Wunused-but-set-variable]

Link: http://lkml.kernel.org/r/20180714161124.3923-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/userfaultfd.c: remove redundant pointer uwq

Pointer uwq is being assigned but is never used hence it is redundant
and can be removed.

Cleans up clang warning:
warning: variable 'uwq' set but not used [-Wunused-but-set-variable]

Link: http://lkml.kernel.org/r/20180717090802.18357-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, vmacache: hash addresses based on pmd

When perf profiling a wide variety of different workloads, it was found
that vmacache_find() had higher than expected cost: up to 0.08% of cpu
utilization in some cases.  This was found to rival other core VM
functions such as alloc_pages_vma() with thp enabled and default
mempolicy, and the conditionals in __get_vma_policy().

VMACACHE_HASH() determines which of the four per-task_struct slots a vma
is cached for a particular address.  This currently depends on the pfn,
so pfn 5212 occupies a different vmacache slot than its neighboring pfn
5213.

vmacache_find() iterates through all four of current's vmacache slots
when looking up an address.  Hashing based on pfn, an address has
~1/VMACACHE_SIZE chance of being cached in the first vmacache slot, or
about 25%, *if* the vma is cached.

This patch hashes an address by its pmd instead of pte to optimize for
workloads with good spatial locality.  This results in a higher
probability of vmas being cached in the first slot that is checked:
normally ~70% on the same workloads instead of 25%.

[rientjes@google.com: various updates]
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1807231532290.109445@chino.kir.corp.google.com
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1807091749150.114630@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/list_lru: introduce list_lru_shrink_walk_irq()

Provide list_lru_shrink_walk_irq() and let it behave like
list_lru_walk_one() except that it locks the spinlock with
spin_lock_irq(). This is used by scan_shadow_nodes() because its lock
nests within the i_pages lock which is acquired with IRQ. This change
allows to use proper locking promitives instead hand crafted
lock_irq_disable() plus spin_lock().

There is no EXPORT_SYMBOL provided because the current user is in-kernel
only.

Add list_lru_shrink_walk_irq() which acquires the spinlock with the
proper locking primitives.

Link: http://lkml.kernel.org/r/20180716111921.5365-5-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>