Wei Yongjun [Thu, 16 Apr 2015 20:36:59 +0000 (13:36 -0700)]
Input: zforce - remove duplicated include
Remove duplicated include for delay.h.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: Heiko Stuebner <heiko.stuebner@bq.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Dan Murphy [Fri, 8 May 2015 23:02:43 +0000 (16:02 -0700)]
Input: add TI drv2665 haptics driver
Add the TI drv2665 piezo haptic driver. This haptics IC requires the data
to be streamed to the FIFO for continuous output.
Datasheet can be found at:
http://www.ti.com/product/drv2665
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Dan Murphy [Fri, 8 May 2015 23:01:39 +0000 (16:01 -0700)]
Input: ff-core - fix spelling mistake in ff-core
Fix spelling of magnitude
s/manginude/magnitude
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Dan Murphy [Fri, 8 May 2015 22:59:57 +0000 (15:59 -0700)]
Input: drv2667 - fix Kconfig error for help screen
Fix the Kconfig for the drv2667 as there was a copy/paste error.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Marek Vasut [Fri, 8 May 2015 05:25:49 +0000 (22:25 -0700)]
Input: smtpe-ts - wait 50mS until polling for pen-up
Wait a little bit longer, 50mS instead of 20mS, until the driver starts
polling for pen-up. The problematic behavior before this patch is applied
is as follows. The behavior was observed on the STMPE610QTR controller.
Upon a physical pen-down event, the touchscreen reports one set of x-y-p
coordinates and a pen-down event. After that, the pen-up polling is
triggered and since the controller is not ready yet, the polling mistakenly
detects a pen-up event while the physical state is still such that the pen
is down on the touch surface.
The pen-up handling flushes the controller FIFO, so after that, all the
samples in the controller are discarded. The controller becomes ready
shortly after this bogus pen-up handling and does generate again a pen-down
interrupt. This time, the controller contains x-y-p samples which all read
as zero. Since pressure value is zero, this set of samples is effectively
ignored by userland.
In the end, the driver just bounces between pen-down and bogus pen-up
handling, generating no useful results. Fix this by giving the controller a
bit more time before polling it for pen-up.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Marek Vasut [Fri, 8 May 2015 05:24:58 +0000 (22:24 -0700)]
Input: smtpe-ts - use msecs_to_jiffies() instead of HZ
Use msecs_to_jiffies(20) instead of plain (HZ / 50), as the former is much
more explicit about it's behavior. We want to schedule the task 20 mS from
now, so make it explicit in the code.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Krzysztof Kozlowski [Wed, 6 May 2015 23:55:21 +0000 (16:55 -0700)]
Input: s3c2410_ts - constify platform_device_id
The platform_device_id is not modified by the driver and core uses it as
const.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Krzysztof Kozlowski [Wed, 6 May 2015 23:54:56 +0000 (16:54 -0700)]
Input: samsung-keypad - constify platform_device_id
The platform_device_id is not modified by the driver and core uses it as
const.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Paul Cercueil [Wed, 6 May 2015 23:52:13 +0000 (16:52 -0700)]
Input: goodix - check the 'buffer status' bit before reading data
The MSB of the first byte read via I2C at the coordinates address
indicates whether the data is valid or ready (called "buffer status" in
the datasheets) when an interrupt is raised. Previously, this bit was
ignored, which resulted in a lot of incorrect detections of "finger
removed" events.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Guido Martínez [Wed, 6 May 2015 23:35:21 +0000 (16:35 -0700)]
Input: adp5589-keys - fix event count mask
The event mask was specified as 0xF (4 bits) when in reality is 0x1F (5
bits) in order to be capable of representing all FIFO length values from
0 to 16.
This caused a problem: when the keypad reported 16 pending events the
driver took it as 0, and did nothing. This in turn caused the keypad to
re-issue the interrupt over and over again.
Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Guido Martínez [Wed, 6 May 2015 23:33:40 +0000 (16:33 -0700)]
Input: adp5589-keys - fix pull mask setting
The pull mask is created by looping each row (column) and building an
8-bit integer with the configuration. It is written byte-by-byte, when
we reach the end of the rows (columns) or we're at the 3rd line (which
finishes the first byte, since each pin is 2bits on the mask).
However, this only works if we have at most 8 pins (2 bytes), which is
not the case for the ADP5589. So, write the byte at each boundary (every
4 rows/columns).
Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Wolfram Sang [Mon, 20 Apr 2015 17:23:38 +0000 (10:23 -0700)]
Input: lm8333 - fix broken email address
My Pengutronix address is not valid anymore, redirect people to the
Pengutronix kernel team.
Reported-by: Harald Geyer <harald@ccbib.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Dudley Du [Mon, 20 Apr 2015 17:00:05 +0000 (10:00 -0700)]
Input: cyapa - fix setting suspend scan rate
The suspend scan rate value should not exceed 1000, unfortunately when
implementing the limit we used max_t instead of min_t, causing the value to
be at least 1000.
Signed-off-by: Dudley Du <dudl@cypress.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Duson Lin [Mon, 20 Apr 2015 17:19:24 +0000 (10:19 -0700)]
Input: elan_i2c - fix calculating number of x and y traces.
According to Elan's firmware engineers we should not be subtracting 1 form
the raw number of x and y traces so that the pitch size is correct. For
example, if the touchpad x resolution is 2800 and x trace number is 20,
the pitch size of x should be 2800/20 = 140, not 2800/19 = 147.36.
Signed-off-by: Duson Lin <dusonlin@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Duson Lin [Mon, 20 Apr 2015 16:59:04 +0000 (09:59 -0700)]
Input: elan_i2c - report hovering contacts
When hover is detected report ABS_MT_DISTANCE as 1; for active contacts
the distance is reported as 0.
Signed-off-by: Duson Lin <dusonlin@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Dmitry Torokhov [Sat, 18 Apr 2015 03:42:47 +0000 (20:42 -0700)]
Input: elants_i2c - zero-extend hardware ID in firmware name
Let's zero-extend hardware id number when forming firmware file name,
to avoid kernel requesting firmware like "elants_i2c_ 0.bin", which
is quite unexpected.
Acked-by: Charlie Mooney<charliemooney@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Hans de Goede [Wed, 15 Apr 2015 17:48:32 +0000 (10:48 -0700)]
Input: alps - document separate pointstick button bits for V2 devices
Non interleaved dualpoint v2 devices have separate pointstick button bits,
document this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Dmitry Torokhov [Tue, 7 Apr 2015 23:30:01 +0000 (16:30 -0700)]
Input: atmel_mxt_ts - add support for Google Pixel 2
This change allows atmel_mxt_ts to bind to ACPI-enumerated devices in
Google Pixel 2 (2015).
While newer version of ACPI standard allow use of device-tree-like
properties in device descriptions, the version of ACPI implemented in
Google BIOS does not support them, and we have to resort to DMI data to
specify exact characteristics of the devices (touchpad vs. touchscreen,
GPIO to button mapping, etc).
Pixel 1 continues to use i2c devices and platform data created by
chromeos-laptop driver, since ACPI does not enumerate them.
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Ming-ting Yao Wei [Tue, 14 Apr 2015 23:59:11 +0000 (16:59 -0700)]
Input: xpad - add rumble support for Xbox One controller
This adds rumble support for Xbox One controller by sending continuous
rumble command. Trigger button rumbling is not yet implemented.
Signed-off-by: Ming-ting Yao Wei <mwei@lxde.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Oliver Neukum [Tue, 14 Apr 2015 21:24:09 +0000 (14:24 -0700)]
Input: ff-core - use new debug macros
Replace old pr_* with dev_* debugging macros
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Thomas Hellstrom [Tue, 14 Apr 2015 17:06:38 +0000 (10:06 -0700)]
Input: add vmmouse driver
VMMouse enables low-latency mouse-cursor-movements for VMWare and QEMU
guests. By removing the guest cursor and using the host as a guest cursor
the cursor movement appears instant although in reality there is some lag.
To be able to do this, the host's view of the cursor position must exactly
match the guest's view and an absolute pointer device is needed. Enter the
VMMouse. While the VMMouse driver has historically been an Xorg user-space
driver, implementing it as a kernel imput driver enables rootless Xorg and
new compositing display servers for VMware guests.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
duson [Sun, 12 Apr 2015 23:01:05 +0000 (16:01 -0700)]
Input: elan_i2c - adjust for newer firmware pressure reporting
Get pressure format flag from firmware to check if we need to normalize
pressure data before reporting it.
Signed-off-by: Duson Lin <dusonlin@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Dmitry Torokhov [Thu, 9 Apr 2015 16:52:31 +0000 (09:52 -0700)]
Input: atkbd - document "no new force-release quirks" policy
To save people some time let's document that we do not want new quirks for
"force-release" keys in the kernel and that they should patch userspace
(udev) instead.
Suggested-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fengguang Wu [Sat, 11 Apr 2015 06:54:31 +0000 (23:54 -0700)]
Input: ALPS - make alps_get_pkt_id_ss4_v2() and others static
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Masaki Ota [Sat, 28 Mar 2015 04:30:46 +0000 (21:30 -0700)]
Input: ALPS - V7 devices can report 5-finger taps
Signed-off-by: Masaki Ota <masaki.ota@jp.alps.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Masaki Ota [Sat, 28 Mar 2015 03:57:52 +0000 (20:57 -0700)]
Input: ALPS - add support for SS4 touchpad devices
This change adds support for SS4 touchpad devices as ALPS_PROTO_V8
protocol. They are real multi-touch devices and can be found in TOSHIBA
Tecra C50.
Signed-off-by: Masaki Ota <masaki.ota@jp.alps.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Masaki Ota [Sat, 28 Mar 2015 03:44:21 +0000 (20:44 -0700)]
Input: ALPS - refactor alps_set_abs_params_mt()
In preparation for adding support for SS4 touchpads, let's split
alps_set_abs_params_mt into common, v7-specific, and other protocols
portions.
Signed-off-by: Masaki Ota <masaki.ota@jp.alps.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Dmitry Torokhov [Tue, 7 Apr 2015 15:46:23 +0000 (08:46 -0700)]
Merge tag 'v4.0-rc7' into next
Sync up with Linux 4.0-rc7 to bring in ALPS changes.
Linus Torvalds [Mon, 6 Apr 2015 22:39:45 +0000 (15:39 -0700)]
Linux 4.0-rc7
Linus Torvalds [Mon, 6 Apr 2015 22:19:59 +0000 (15:19 -0700)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) In TCP, don't register an FRTO for cumulatively ACK'd data that was
previously SACK'd, from Neal Cardwell.
2) Need to hold RNL mutex in ipv4 multicast code namespace cleanup,
from Cong WANG.
3) Similarly we have to hold RNL mutex for fib_rules_unregister(), also
from Cong WANG.
4) Revert and rework netns nsid allocation fix, from Nicolas Dichtel.
5) When we encapsulate for a tunnel device, skb->sk still points to the
user socket. So this leads to cases where we retraverse the
ipv4/ipv6 output path with skb->sk being of some other address
family (f.e. AF_PACKET). This can cause things to crash since the
ipv4 output path is dereferencing an AF_PACKET socket as if it were
an ipv4 one.
The short term fix for 'net' and -stable is to elide these socket
checks once we've entered an encapsulation sequence by testing
xmit_recursion.
Longer term we have a better solution wherein we pass the tunnel's
socket down through the output paths, but that is way too invasive
for 'net' and -stable.
From Hannes Frederic Sowa.
6) l2tp_init() failure path forgets to unregister per-net ops, from
Cong WANG.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
net/mlx4_core: Fix error message deprecation for ConnectX-2 cards
net: dsa: fix filling routing table from OF description
l2tp: unregister l2tp_net_ops on failure path
mvneta: dont call mvneta_adjust_link() manually
ipv6: protect skb->sk accesses from recursive dereference inside the stack
netns: don't allocate an id for dead netns
Revert "netns: don't clear nsid too early on removal"
ip6mr: call del_timer_sync() in ip6mr_free_table()
net: move fib_rules_unregister() under rtnl lock
ipv4: take rtnl_lock and mark mrt table as freed on namespace cleanup
tcp: fix FRTO undo on cumulative ACK of SACKed range
xen-netfront: transmit fully GSO-sized packets
Jack Morgenstein [Sun, 5 Apr 2015 14:50:48 +0000 (17:50 +0300)]
net/mlx4_core: Fix error message deprecation for ConnectX-2 cards
Commit
1daa4303b4ca ("net/mlx4_core: Deprecate error message at
ConnectX-2 cards startup to debug") did the deprecation only for port 1
of the card. Need to deprecate for port 2 as well.
Fixes:
1daa4303b4ca ("net/mlx4_core: Deprecate error message at ConnectX-2 cards startup to debug")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Nakonechny [Sat, 4 Apr 2015 21:46:21 +0000 (00:46 +0300)]
net: dsa: fix filling routing table from OF description
According to description in 'include/net/dsa.h', in cascade switches
configurations where there are more than one interconnected devices,
'rtable' array in 'dsa_chip_data' structure is used to indicate which
port on this switch should be used to send packets to that are destined
for corresponding switch.
However, dsa_of_setup_routing_table() fills 'rtable' with port numbers
of the _target_ switch, but not current one.
This commit removes redundant devicetree parsing and adds needed port
number as a function argument. So dsa_of_setup_routing_table() now just
looks for target switch number by parsing parent of 'link' device node.
To remove possible misunderstandings with the way of determining target
switch number, a corresponding comment was added to the source code and
to the DSA device tree bindings documentation file.
This was tested on a custom board with two Marvell 88E6095 switches with
following corresponding routing tables: { -1, 10 } and { 8, -1 }.
Signed-off-by: Pavel Nakonechny <pavel.nakonechny@skitlab.ru>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Mon, 6 Apr 2015 21:10:08 +0000 (14:10 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"Updates for the input subsystem - two more tweaks for ALPS driver to
work out kinks after splitting the touchpad, trackstick, and potential
external PS/2 mouse into separate input devices.
Changes to support ALPS SS4 devices (protocol V8) will be coming in
4.1..."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: alps - document stick behavior for protocol V2
Input: alps - report V2 Dualpoint Stick events via the right evdev node
Input: alps - report interleaved bare PS/2 packets via dev3
WANG Cong [Fri, 3 Apr 2015 20:46:09 +0000 (13:46 -0700)]
l2tp: unregister l2tp_net_ops on failure path
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sjoerd Simons [Mon, 6 Apr 2015 20:10:30 +0000 (13:10 -0700)]
Input: atmel_mxt_ts - split out touchpad initialisation logic
If the "linux,gpio-keymap" DT property is defined, the T19 keys are
configured and the device is setup as a touchpad rather than a touchscreen.
The logic is part of the input device initialization routine but it can be
factored out to its own function to simplify the former.
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Nick Dyer [Mon, 6 Apr 2015 18:25:13 +0000 (11:25 -0700)]
Input: atmel_mxt_ts - implement support for T100 touch object
Add support for the new T100 object which replaces the previous T9
multitouch touchscreen object in recent maXTouch devices. T100 provides
improved reporting with selectable auxiliary information, and a type field
for hover/stylus/glove reporting.
The hovering finger support was based on Chung-Yih's work in the ChromiumOS
downstream kernel:
https://chromium-review.googlesource.com/#/c/219280/
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Yufeng Shen <miletus@chromium.org>
[javier: Factor out T9 and T100 init functions and rework hover support]
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Stas Sergeev [Wed, 1 Apr 2015 16:23:29 +0000 (19:23 +0300)]
mvneta: dont call mvneta_adjust_link() manually
mvneta_adjust_link() is a callback for of_phy_connect() and should
not be called directly. The result of calling it directly is as below:
Signed-off-by: David S. Miller <davem@davemloft.net>
hannes@stressinduktion.org [Wed, 1 Apr 2015 15:07:44 +0000 (17:07 +0200)]
ipv6: protect skb->sk accesses from recursive dereference inside the stack
We should not consult skb->sk for output decisions in xmit recursion
levels > 0 in the stack. Otherwise local socket settings could influence
the result of e.g. tunnel encapsulation process.
ipv6 does not conform with this in three places:
1) ip6_fragment: we do consult ipv6_npinfo for frag_size
2) sk_mc_loop in ipv6 uses skb->sk and checks if we should
loop the packet back to the local socket
3) ip6_skb_dst_mtu could query the settings from the user socket and
force a wrong MTU
Furthermore:
In sk_mc_loop we could potentially land in WARN_ON(1) if we use a
PF_PACKET socket ontop of an IPv6-backed vxlan device.
Reuse xmit_recursion as we are currently only interested in protecting
tunnel devices.
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tomeu Vizoso [Mon, 6 Apr 2015 16:44:59 +0000 (09:44 -0700)]
Input: cros_ec_keyb - fix clearing keyboard state on wakeup
As the comment right before explains, the keyboard state is to be cleared
only if the EC wasn't a wakeup source in the last suspend.
Without this commit, there's an unneeded delay when resuming from suspend
and we also lose the key that was pressed while suspended.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Michael S. Tsirkin [Mon, 6 Apr 2015 16:23:30 +0000 (09:23 -0700)]
Input: gscps2 - drop pci_ids dependency
This driver does not use any PCI IDs, don't include the pci_ids.h header.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Benjamin Tissoires [Sun, 5 Apr 2015 20:45:04 +0000 (13:45 -0700)]
Input: synaptics - allocate 3 slots to keep stability in image sensors
When slowly dropping 1, 2 and then 3 fingers on an image sensor touchpad,
we can see that the first finger gets reassigned a new slot while it did
not move. This is due to the kernel tracking algorithm which can not assign
correctly the 3 touches, being out of slots.
Declaring that we support 3 slots allows to actually forward:
slot 0 -> down, slot 1 -> up, slot 2 -> down
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Henrik Rydberg <rydberg@bitmath.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Benjamin Tissoires [Sun, 5 Apr 2015 20:44:12 +0000 (13:44 -0700)]
Input: Revert "Revert "synaptics - use dmax in input_mt_assign_slots""
This reverts commit
09d042a2eb90 ("Revert "Input: synaptics - use dmax in
input_mt_assign_slots"")
Now that balanced slots assignments seem to be fixed, let's re-enable the
use in synaptics.c and wait for users to complain if there are still
problems.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Henrik Rydberg <rydberg@bitmath.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Benjamin Tissoires [Sun, 5 Apr 2015 20:41:35 +0000 (13:41 -0700)]
Input: MT - make slot assignment work for overcovered solutions
The recent inclusion of a deassignment cost in the slot assignment
algorithm did not properly account for the corner cases where the
solutions are overcovered. This change makes sure the resulting
assignment is unique, allocating new slots when necessary.
Signed-off-by: Henrik Rydberg <rydberg@bitmath.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Hans de Goede [Sat, 4 Apr 2015 00:30:31 +0000 (17:30 -0700)]
Input: alps - document stick behavior for protocol V2
Document that protocol V2 uses standard (bare) PS/2 mouse packets for the
DualPoint stick.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-By: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Hans de Goede [Sat, 4 Apr 2015 00:20:05 +0000 (17:20 -0700)]
Input: alps - report V2 Dualpoint Stick events via the right evdev node
On V2 devices the DualPoint Stick reports bare packets, these should be
reported via the "AlpsPS/2 ALPS DualPoint Stick" dev2 evdev node, which also
has the INPUT_PROP_POINTING_STICK propbit set.
Note that since there is no way to distinguish these packets from an external
PS/2 mouse (insofar as these laptops have an external PS/2 port) this means
that we will be reporting PS/2 mouse events via this evdev node too, as we've
been doing in kernel 3.19 and older.
This has been tested on a Dell Latitude D620 and a Dell Latitude E6400,
which both have a V2 touchpad + a DualPoint Stick which reports bare packets.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Hans de Goede [Sat, 4 Apr 2015 00:14:40 +0000 (17:14 -0700)]
Input: alps - report interleaved bare PS/2 packets via dev3
Bare packets should be reported via the same evdev device independent on
whether they are detected on the beginning of a packet or in the middle
of a packet.
This has been tested on a Dell Latitude E6400, where the DualPoint Stick
reports bare packets, which get reported via dev3 when the touchpad is
idle, and via dev2 when the touchpad and stick are used simultaneously.
This commit fixes this inconsistency by always reporting bare packets via
dev3. Note that since the come from a DualPoint Stick they really should be
reported via dev2, this gets fixed in a later commit.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Linus Torvalds [Sat, 4 Apr 2015 19:26:28 +0000 (12:26 -0700)]
Merge tag 'usb-4.0-rc6' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes and new device ids for 4.0-rc6. Nothing
major, some xhci fixes for reported problems, and some usb-serial
device ids.
All have been in linux-next for a while"
* tag 'usb-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: ftdi_sio: Use jtag quirk for SNAP Connect E10
usb: isp1760: fix spin unlock in the error path of isp1760_udc_start
usb: xhci: apply XHCI_AVOID_BEI quirk to all Intel xHCI controllers
usb: xhci: handle Config Error Change (CEC) in xhci driver
USB: keyspan_pda: add new device id
USB: ftdi_sio: Added custom PID for Synapse Wireless product
Linus Torvalds [Sat, 4 Apr 2015 19:22:31 +0000 (12:22 -0700)]
Merge tag 'staging-4.0-rc6' of git://git./linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some staging driver fixes, well, really all just IIO driver
fixes, for 4.0-rc6. They fix issues that have been reported with
these drivers.
All of these patches have been in linux-next for a while"
* tag 'staging-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: imu: Use iio_trigger_get for indio_dev->trig assignment
iio: adc: vf610: use ADC clock within specification
iio/adc/cc10001_adc.c: Fix !HAS_IOMEM build
iio: core: Fix double free.
iio:inv-mpu6050: Fix inconsistency for the scale channel
staging: iio: dummy: Fix undefined symbol build error
iio: inv_mpu6050: Clear timestamps fifo while resetting hardware fifo
staging: iio: hmc5843: Set iio name property in sysfs
iio: bmc150: change sampling frequency
iio: fix drivers that check buffer->scan_mask
Linus Torvalds [Sat, 4 Apr 2015 19:11:57 +0000 (12:11 -0700)]
Merge tag 'tty-4.0-rc6' of git://git./linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are 3 serial driver fixes for 4.0-rc6. They fix some reported
issues with the samsung and fsl_lpuart drivers.
All have been in linux-next for a while"
* tag 'tty-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: serial: fsl_lpuart: clear receive flag on FIFO flush
tty: serial: fsl_lpuart: specify transmit FIFO size
serial: samsung: Clear operation mode on UART shutdown
Linus Walleij [Fri, 27 Mar 2015 16:32:06 +0000 (09:32 -0700)]
mfd: tc3589x: enforce device-tree only mode
All systems using the TC3589x multifunction expander uses
devicetree, so don't clutter the place with a lot of
and assume it is there.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Linus Walleij [Fri, 27 Mar 2015 16:28:16 +0000 (09:28 -0700)]
Input: tc3589x - localize platform data
This driver can only get its platform data from the device tree, and all
platforms using it do that. Localize the platform data for the keypad. A
later patch will enforce the device tree / OF dependence.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Linus Torvalds [Fri, 3 Apr 2015 21:58:48 +0000 (14:58 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull input subsystem fixes from Dmitry Torokhov:
"A fix for ALPS driver for issue introduced in the latest update and a
tweak for yet another Lenovo box in Synaptics.
There will be more ALPS tweaks coming.."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: define INPUT_PROP_ACCELEROMETER behavior
Input: synaptics - fix min-max quirk value for E440
Input: synaptics - add quirk for Thinkpad E440
Input: ALPS - fix max coordinates for v5 and v7 protocols
Input: add MT_TOOL_PALM
Linus Torvalds [Fri, 3 Apr 2015 21:49:26 +0000 (14:49 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block layer fix from Jens Axboe:
"Just one patch in this pull request, fixing a regression caused by a
'mathematically correct' change to lcm()"
* 'for-linus' of git://git.kernel.dk/linux-block:
block: fix blk_stack_limits() regression due to lcm() change
Linus Torvalds [Fri, 3 Apr 2015 17:42:32 +0000 (10:42 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes: a SYSRET single-stepping fix, a dmi-scan robustization
fix, a reboot quirk and a kgdb fixlet"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kgdb/x86: Fix reporting of 'si' in kgdb on x86_64
x86/asm/entry/64: Disable opportunistic SYSRET if regs->flags has TF set
x86/reboot: Add ASRock Q1900DC-ITX mainboard reboot quirk
MAINTAINERS: Change the x86 microcode loader maintainer
firmware: dmi_scan: Prevent dmi_num integer overflow
Linus Torvalds [Fri, 3 Apr 2015 17:38:36 +0000 (10:38 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Two x86 Intel PMU constraint handling fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix Haswell CYCLE_ACTIVITY.* counter constraints
perf/x86/intel: Filter branches for PEBS event
Linus Torvalds [Fri, 3 Apr 2015 17:15:19 +0000 (10:15 -0700)]
Merge tag 'devicetree-for-linus' of git://git./linux/kernel/git/glikely/linux
Pull devicetree fix from Grant Likely:
"Simple bugfix for bad device tree data on the PA-Semi platform"
* tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux:
drivers/of: Add empty ranges quirk for PA-Semi
Linus Torvalds [Fri, 3 Apr 2015 16:54:36 +0000 (09:54 -0700)]
Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6
Pull CIFS fixes from Steve French:
"A set of small cifs fixes fixing a memory leak, kernel oops, and
infinite loop (and some spotted by Coverity)"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
Fix warning
Fix another dereference before null check warning
CIFS: session servername can't be null
Fix warning on impossible comparison
Fix coverity warning
Fix dereference before null check warning
Don't ignore errors on encrypting password in SMBTcon
Fix warning on uninitialized buftype
cifs: potential memory leaks when parsing mnt opts
cifs: fix use-after-free bug in find_writable_file
cifs: smb2_clone_range() - exit on unhandled error
Nicolas Dichtel [Fri, 3 Apr 2015 10:02:37 +0000 (12:02 +0200)]
netns: don't allocate an id for dead netns
First, let's explain the problem.
Suppose you have an ipip interface that stands in the netns foo and its link
part in the netns bar (so the netns bar has an nsid into the netns foo).
Now, you remove the netns bar:
- the bar nsid into the netns foo is removed
- the netns exit method of ipip is called, thus our ipip iface is removed:
=> a netlink message is built in the netns foo to advertise this deletion
=> this netlink message requests an nsid for bar, thus a new nsid is
allocated for bar and never removed.
This patch adds a check in peernet2id() so that an id cannot be allocated for
a netns which is currently destroyed.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Dichtel [Fri, 3 Apr 2015 10:02:36 +0000 (12:02 +0200)]
Revert "netns: don't clear nsid too early on removal"
This reverts
commit
4217291e592d ("netns: don't clear nsid too early on removal").
This is not the right fix, it introduces races.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Tue, 31 Mar 2015 18:01:47 +0000 (11:01 -0700)]
ip6mr: call del_timer_sync() in ip6mr_free_table()
We need to wait for the flying timers, since we
are going to free the mrtable right after it.
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Tue, 31 Mar 2015 18:01:46 +0000 (11:01 -0700)]
net: move fib_rules_unregister() under rtnl lock
We have to hold rtnl lock for fib_rules_unregister()
otherwise the following race could happen:
fib_rules_unregister(): fib_nl_delrule():
... ...
... ops = lookup_rules_ops();
list_del_rcu(&ops->list);
list_for_each_entry(ops->rules) {
fib_rules_cleanup_ops(ops); ...
list_del_rcu(); list_del_rcu();
}
Note, net->rules_mod_lock is actually not needed at all,
either upper layer netns code or rtnl lock guarantees
we are safe.
Cc: Alexander Duyck <alexander.h.duyck@redhat.com>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Tue, 31 Mar 2015 18:01:45 +0000 (11:01 -0700)]
ipv4: take rtnl_lock and mark mrt table as freed on namespace cleanup
This is the IPv4 part for commit
905a6f96a1b1
(ipv6: take rtnl_lock and mark mrt6 table as freed on namespace cleanup).
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 3 Apr 2015 00:18:57 +0000 (17:18 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"One drm core fix, one exynos regression fix, two sets of radeon fixes
(Alex was a bit behind last week), and two i915 fixes.
Nothing too serious we seem to have calmed down i915 since last week"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/radeon: fix wait in radeon_mn_invalidate_range_start
drm/radeon: add extra check in radeon_ttm_tt_unpin_userptr
drm: Exynos: Respect framebuffer pitch for FIMD/Mixer
drm/i915: Reject the colorkey ioctls for primary and cursor planes
drm/i915: Skip allocating shadow batch for 0-length batches
drm/radeon: programm the VCE fw BAR as well
drm/radeon: always dump the ring content if it's available
radeon: Do not directly dereference pointers to BIOS area.
drm/radeon/dpm: fix 120hz handling harder
drm/edid: set ELD for firmware and debugfs override EDIDs
Linus Torvalds [Thu, 2 Apr 2015 23:37:56 +0000 (16:37 -0700)]
Merge tag 'irqchip-fixes-4.0-2' of git://git.infradead.org/users/jcooper/linux
Pull irqchip fixes from Jason Cooper:
"This is the second round of fixes for irqchip. It contains some fixes
found while the arm64 guys were writing the kvm gicv3 its emulation.
GICv3 ITS:
- Small batch of fixes discovered while writing the kvm ITS emulation"
* tag 'irqchip-fixes-4.0-2' of git://git.infradead.org/users/jcooper/linux:
irqchip: gicv3-its: Use non-cacheable accesses when no shareability
irqchip: gicv3-its: Fix PROP/PEND and BASE/CBASE confusion
irqchip: gicv3-its: Fix device ID encoding
irqchip: gicv3-its: Fix encoding of collection's target redistributor
Dave Airlie [Thu, 2 Apr 2015 23:28:55 +0000 (09:28 +1000)]
Merge branch 'drm-fixes-4.0' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
Just two small fixes for radeon, both destined for stable.
* 'drm-fixes-4.0' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: fix wait in radeon_mn_invalidate_range_start
drm/radeon: add extra check in radeon_ttm_tt_unpin_userptr
Dave Airlie [Thu, 2 Apr 2015 23:28:18 +0000 (09:28 +1000)]
Merge branch 'exynos-drm-fixes' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-fixes
Fix display on issue to Exynos5250 based Snow(1366x768) board.
* 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm: Exynos: Respect framebuffer pitch for FIMD/Mixer
Dave Airlie [Thu, 2 Apr 2015 23:27:48 +0000 (09:27 +1000)]
Merge tag 'drm-intel-fixes-2015-04-02' of git://anongit.freedesktop.org/drm-intel into drm-fixes
one oops fixes and a 0-length allocation fix from next backported.
* tag 'drm-intel-fixes-2015-04-02' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Reject the colorkey ioctls for primary and cursor planes
drm/i915: Skip allocating shadow batch for 0-length batches
Dave Airlie [Thu, 2 Apr 2015 23:27:15 +0000 (09:27 +1000)]
Merge tag 'topic/drm-fixes-2015-04-02' of git://anongit.freedesktop.org/drm-intel into drm-fixes
Here's a single drm core fix, cc: stable, that affects i915
users.
* tag 'topic/drm-fixes-2015-04-02' of git://anongit.freedesktop.org/drm-intel:
drm/edid: set ELD for firmware and debugfs override EDIDs
Linus Torvalds [Thu, 2 Apr 2015 20:53:53 +0000 (13:53 -0700)]
Merge tag 'stable/for-linus-4.0-rc6-tag' of git://git./linux/kernel/git/xen/tip
Pull xen regression fixes from David Vrabel:
"Fix two regressions in the balloon driver's use of memory hotplug when
used in a PV guest"
* tag 'stable/for-linus-4.0-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/balloon: before adding hotplugged memory, set frames to invalid
x86/xen: prepare p2m list for memory hotplug
Linus Torvalds [Thu, 2 Apr 2015 20:48:43 +0000 (13:48 -0700)]
Merge tag 'powerpc-4.0-4' of git://git./linux/kernel/git/mpe/linux
Pull powerpc fix from Michael Ellerman:
"Fix memory corruption by pnv_alloc_idle_core_states"
* tag 'powerpc-4.0-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux:
powerpc: fix memory corruption by pnv_alloc_idle_core_states
Neal Cardwell [Thu, 2 Apr 2015 00:26:46 +0000 (20:26 -0400)]
tcp: fix FRTO undo on cumulative ACK of SACKed range
On processing cumulative ACKs, the FRTO code was not checking the
SACKed bit, meaning that there could be a spurious FRTO undo on a
cumulative ACK of a previously SACKed skb.
The FRTO code should only consider a cumulative ACK to indicate that
an original/unretransmitted skb is newly ACKed if the skb was not yet
SACKed.
The effect of the spurious FRTO undo would typically be to make the
connection think that all previously-sent packets were in flight when
they really weren't, leading to a stall and an RTO.
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Fixes:
e33099f96d99c ("tcp: implement RFC5682 F-RTO")
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 2 Apr 2015 20:35:58 +0000 (13:35 -0700)]
Merge tag 'rdma-for-linus' of git://git./linux/kernel/git/roland/infiniband
Pull infiniband/rdma fix from Roland Dreier:
"Fix for exploitable integer overflow in uverbs interface"
* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
IB/uverbs: Prevent integer overflow in ib_umem_get address arithmetic
Jonathan Davies [Tue, 31 Mar 2015 10:05:15 +0000 (11:05 +0100)]
xen-netfront: transmit fully GSO-sized packets
xen-netfront limits transmitted skbs to be at most 44 segments in size. However,
GSO permits up to 65536 bytes, which means a maximum of 45 segments of 1448
bytes each. This slight reduction in the size of packets means a slight loss in
efficiency.
Since c/s
9ecd1a75d, xen-netfront sets gso_max_size to
XEN_NETIF_MAX_TX_SIZE - MAX_TCP_HEADER,
where XEN_NETIF_MAX_TX_SIZE is 65535 bytes.
The calculation used by tcp_tso_autosize (and also tcp_xmit_size_goal since c/s
6c09fa09d) in determining when to split an skb into two is
sk->sk_gso_max_size - 1 - MAX_TCP_HEADER.
So the maximum permitted size of an skb is calculated to be
(XEN_NETIF_MAX_TX_SIZE - MAX_TCP_HEADER) - 1 - MAX_TCP_HEADER.
Intuitively, this looks like the wrong formula -- we don't need two TCP headers.
Instead, there is no need to deviate from the default gso_max_size of 65536 as
this already accommodates the size of the header.
Currently, the largest skb transmitted by netfront is 63712 bytes (44 segments
of 1448 bytes each), as observed via tcpdump. This patch makes netfront send
skbs of up to 65160 bytes (45 segments of 1448 bytes each).
Similarly, the maximum allowable mtu does not need to subtract MAX_TCP_HEADER as
it relates to the size of the whole packet, including the header.
Fixes:
9ecd1a75d977 ("xen-netfront: reduce gso_max_size to account for max TCP header")
Signed-off-by: Jonathan Davies <jonathan.davies@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 2 Apr 2015 18:30:36 +0000 (11:30 -0700)]
Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"This time we have addition of caps for jz4740 which fixes intentional
warning at boot. Then we have memory leak issues in drivers using
virt-dma by Peter on few drive"
* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: moxart-dma: Fix memory leak when stopping a running transfer
dmaengine: bcm2835-dma: Fix memory leak when stopping a running transfer
dmaengine: omap-dma: Fix memory leak when terminating running transfer
dmaengine: edma: fix memory leak when terminating running transfers
dmaengine: jz4740: Define capabilities
Linus Torvalds [Thu, 2 Apr 2015 18:09:41 +0000 (11:09 -0700)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Fix use-after-free with mac80211 RX A-MPDU reorder timer, from
Johannes Berg.
2) iwlwifi leaks memory every module load/unload cycles, fix from Larry
Finger.
3) Need to use for_each_netdev_safe() in rtnl_group_changelink()
otherwise we can crash, from WANG Cong.
4) mlx4 driver does register_netdev() too early in the probe sequence,
from Ido Shamay.
5) Don't allow router discovery hop limit to decrease the interface's
hop limit, from D.S. Ljungmark.
6) tx_packets and tx_bytes improperly accounted for certain classes of
USB network devices, fix from Ben Hutchings.
7) ip{6}mr_rules_init() mistakenly use plain kfree to release the ipmr
tables in the error path, they must instead use ip{6}mr_free_table().
Fix from WANG Cong.
8) cxgb4 doesn't properly quiesce all RX activity before unregistering
the netdevice. Fix from Hariprasad Shenai.
9) Fix hash corruptions in ipvlan driver, from Jiri Benc.
10) nla_memcpy(), like a real memcpy, should fully initialize the
destination buffer, even if the source attribute is smaller. Fix
from Jiri Benc.
11) Fix wrong error code returned from iucv_sock_sendmsg(). We should
use whatever sock_alloc_send_skb() put into 'err'. From Eugene
Crosser.
12) Fix slab object leak on module unload in TIPC, from Ying Xue.
13) Need a READ_ONCE() when reading the cached RX socket route in
tcp_v{4,6}_early_demux(). From Michal Kubecek.
14) Still too many problems with TPC support in the ath9k driver, so
disable it for now. From Felix Fietkau.
15) When in AP mode the rtlwifi driver can leak DMA mappings, fix from
Larry Finger.
16) Missing kzalloc() failure check in gs_usb CAN driver, from Colin Ian
King.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits)
cxgb4: Fix to dump devlog, even if FW is crashed
cxgb4: Firmware macro changes for fw verison 1.13.32.0
bnx2x: Fix kdump when iommu=on
bnx2x: Fix kdump on 4-port device
mac80211: fix RX A-MPDU session reorder timer deletion
MAINTAINERS: Update Intel Wired Ethernet Driver info
tipc: fix a slab object leak
net/usb/r8152: add device id for Lenovo TP USB 3.0 Ethernet
af_iucv: fix AF_IUCV sendmsg() errno
openvswitch: Return vport module ref before destruction
netlink: pad nla_memcpy dest buffer with zeroes
bonding: Bonding Overriding Configuration logic restored.
ipvlan: fix check for IP addresses in control path
ipvlan: do not use rcu operations for address list
ipvlan: protect against concurrent link removal
ipvlan: fix addr hash list corruption
net: fec: setup right value for mdio hold time
net: tcp6: fix double call of tcp_v6_fill_cb()
cxgb4vf: Fix sparse warnings
netns: don't clear nsid too early on removal
...
Shachar Raindel [Wed, 18 Mar 2015 17:39:08 +0000 (17:39 +0000)]
IB/uverbs: Prevent integer overflow in ib_umem_get address arithmetic
Properly verify that the resulting page aligned end address is larger
than both the start address and the length of the memory area requested.
Both the start and length arguments for ib_umem_get are controlled by
the user. A misbehaving user can provide values which will cause an
integer overflow when calculating the page aligned end address.
This overflow can cause also miscalculation of the number of pages
mapped, and additional logic issues.
Addresses: CVE-2014-8159
Cc: <stable@vger.kernel.org>
Signed-off-by: Shachar Raindel <raindel@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Andi Kleen [Mon, 9 Mar 2015 18:20:22 +0000 (11:20 -0700)]
perf/x86/intel: Fix Haswell CYCLE_ACTIVITY.* counter constraints
Some of the CYCLE_ACTIVITY.* events can only be scheduled on
counter 2. Due to a typo Haswell matched those with
INTEL_EVENT_CONSTRAINT, which lead to the events never
matching as the comparison does not expect anything
in the umask too. Fix the typo.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1425925222-32361-1-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Kan Liang [Fri, 27 Mar 2015 14:38:25 +0000 (10:38 -0400)]
perf/x86/intel: Filter branches for PEBS event
For supporting Intel LBR branches filtering, Intel LBR sharing logic
mechanism is introduced from commit
b36817e88630 ("perf/x86: Add Intel
LBR sharing logic"). It modifies __intel_shared_reg_get_constraints() to
config lbr_sel, which is finally used to set LBR_SELECT.
However, the intel_shared_regs_constraints() function is called after
intel_pebs_constraints(). The PEBS event will return immediately after
intel_pebs_constraints(). So it's impossible to filter branches for PEBS
events.
This patch moves intel_shared_regs_constraints() ahead of
intel_pebs_constraints().
We can safely do that because the intel_shared_regs_constraints() function
only returns empty constraint if its rejecting the event, otherwise it
returns NULL such that we continue calling intel_pebs_constraints() and
x86_get_event_constraint().
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1427467105-9260-1-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Christian König [Tue, 31 Mar 2015 15:36:58 +0000 (17:36 +0200)]
drm/radeon: fix wait in radeon_mn_invalidate_range_start
We need to wait for all fences, not just the exclusive one.
Signed-off-by: Christian König <christian.koenig@amd.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 31 Mar 2015 15:36:57 +0000 (17:36 +0200)]
drm/radeon: add extra check in radeon_ttm_tt_unpin_userptr
We somehow try to free the SG table twice.
Bugs: https://bugs.freedesktop.org/show_bug.cgi?id=89734
Signed-off-by: Christian König <christian.koenig@amd.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Daniel Stone [Tue, 17 Mar 2015 13:24:58 +0000 (13:24 +0000)]
drm: Exynos: Respect framebuffer pitch for FIMD/Mixer
When performing a modeset, use the framebuffer pitch value to set FIMD
IMG_SIZE and Mixer SPAN registers. These are both defined as pitch - the
distance between contiguous lines (bytes for FIMD, pixels for mixer).
Fixes display on Snow (1366x768).
Signed-off-by: Daniel Stone <daniels@collabora.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Steffen Liebergeld [Thu, 2 Apr 2015 09:01:59 +0000 (11:01 +0200)]
kgdb/x86: Fix reporting of 'si' in kgdb on x86_64
This patch fixes an error in kgdb for x86_64 which would report
the value of dx when asked to give the value of si.
Signed-off-by: Steffen Liebergeld <steffen.liebergeld@kernkonzept.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andy Lutomirski [Wed, 1 Apr 2015 21:26:34 +0000 (14:26 -0700)]
x86/asm/entry/64: Disable opportunistic SYSRET if regs->flags has TF set
When I wrote the opportunistic SYSRET code, I missed an important difference
between SYSRET and IRET.
Both instructions are capable of setting EFLAGS.TF, but they behave differently
when doing so:
- IRET will not issue a #DB trap after execution when it sets TF.
This is critical -- otherwise you'd never be able to make forward progress when
returning to userspace.
- SYSRET, on the other hand, will trap with #DB immediately after
returning to CPL3, and the next instruction will never execute.
This breaks anything that opportunistically SYSRETs to a user
context with TF set. For example, running this code with TF set
and a SIGTRAP handler loaded never gets past 'post_nop':
extern unsigned char post_nop[];
asm volatile ("pushfq\n\t"
"popq %%r11\n\t"
"nop\n\t"
"post_nop:"
: : "c" (post_nop) : "r11");
In my defense, I can't find this documented in the AMD or Intel manual.
Fix it by using IRET to restore TF.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes:
2a23c6b8a9c4 ("x86_64, entry: Use sysret to return to userspace when possible")
Link: http://lkml.kernel.org/r/9472f1ca4c19a38ecda45bba9c91b7168135fcfa.1427923514.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ville Syrjälä [Fri, 27 Mar 2015 17:59:40 +0000 (19:59 +0200)]
drm/i915: Reject the colorkey ioctls for primary and cursor planes
The legcy colorkey ioctls are only implemented for sprite planes, so
reject the ioctl for primary/cursor planes. If we want to support
colorkeying with these planes (assuming we have hw support of course)
we should just move ahead with the colorkey property conversion.
Testcase: kms_legacy_colorkey
Cc: Tommi Rantala <tt.rantala@gmail.com>
Cc: stable@vger.kernel.org
Reference: http://mid.gmane.org/CA+ydwtr+bCo7LJ44JFmUkVRx144UDFgOS+aJTfK6KHtvBDVuAw@mail.gmail.com
Reported-and-tested-by: Tommi Rantala <tt.rantala@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
David S. Miller [Wed, 1 Apr 2015 18:48:50 +0000 (14:48 -0400)]
Merge tag 'wireless-drivers-for-davem-2015-04-01' of git://git./linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
iwlwifi:
* fix a memory leak, we leaked memory each time the module
was loaded.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 1 Apr 2015 18:47:21 +0000 (14:47 -0400)]
Merge branch 'cxgb4-net'
Hariprasad Shenai says:
====================
cxgb4 FW macro changes for new FW
Fix to dump device log even in the case of firmware crash. Also
incorporates changes for new FW.
This patch series has been created against net tree and includes patches on
cxgb4 driver.
We have included all the maintainers of respective drivers. Kindly review the
change and let us know in case of any review comments.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Hariprasad Shenai [Wed, 1 Apr 2015 16:11:16 +0000 (21:41 +0530)]
cxgb4: Fix to dump devlog, even if FW is crashed
Add new Common Code routines to retrieve Firmware Device Log
parameters from PCIE_FW_PF[7]. The firmware initializes its Device Log very
early on and stores the parameters for its location/size in that register.
Using the parameters from the register allows us to access the Firmware
Device Log even when the firmware crashes very early on or we're not
attached to the firmware
Based on original work by Casey Leedom <leedom@chelsio.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hariprasad Shenai [Wed, 1 Apr 2015 16:11:15 +0000 (21:41 +0530)]
cxgb4: Firmware macro changes for fw verison 1.13.32.0
Adds new macro and few macro changes for fw version 1.13.32.0 also
changes version string in driver to match 1.13.32.0
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 1 Apr 2015 18:19:22 +0000 (14:19 -0400)]
Merge tag 'mac80211-for-davem-2015-04-01' of git://git./linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
This contains just a single fix for a crash I happened to randomly
run into today during testing. It's clearly been around for a while,
but is pretty hard to trigger, even when I tried explicitly (and
modified the code to make it more likely) it rarely did.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Wed, 1 Apr 2015 17:29:55 +0000 (10:29 -0700)]
Merge tag 'iommu-fixes-v4.0-rc6' of git://git./linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
"This contains fixes for:
- a VT-d issue where hardware domain-ids might be freed while still
in use.
- an ipmmu-vmsa issue where where the device-table was not zero
terminated
- unchecked register access issue in the arm-smmu driver"
* tag 'iommu-fixes-v4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Remove unused variable
iommu: ipmmu-vmsa: Add terminating entry for ipmmu_of_ids
iommu/vt-d: Detach domain *only* from attached iommus
iommu/arm-smmu: fix ARM_SMMU_FEAT_TRANS_OPS condition
Rusty Russell [Wed, 1 Apr 2015 06:33:30 +0000 (17:03 +1030)]
lguest: now needs PCI_DIRECT.
Since commit
8e7094694396 ("lguest: add a dummy PCI host bridge.")
lguest uses PCI, but it needs you to frob the ports directly.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 1 Apr 2015 17:05:42 +0000 (10:05 -0700)]
Merge tag 'lazytime_fix' of git://git./linux/kernel/git/tytso/ext4
Pull lazytime fixes from Ted Ts'o:
"This fixes a problem in the lazy time patches, which can cause
frequently updated inods to never have their timestamps updated.
These changes guarantee that no timestamp on disk will be stale by
more than 24 hours"
* tag 'lazytime_fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
fs: add dirtytime_expire_seconds sysctl
fs: make sure the timestamps for lazytime inodes eventually get written
Linus Torvalds [Wed, 1 Apr 2015 16:45:47 +0000 (09:45 -0700)]
Merge branch 'for-4.0' of git://linux-nfs.org/~bfields/linux
Pull nfsd fixes from Bruce Fields:
"Two main issues:
- We found that turning on pNFS by default (when it's configured at
build time) was too aggressive, so we want to switch the default
before the 4.0 release.
- Recent client changes to increase open parallelism uncovered a
serious bug lurking in the server's open code.
Also fix a krb5/selinux regression.
The rest is mainly smaller pNFS fixes"
* 'for-4.0' of git://linux-nfs.org/~bfields/linux:
sunrpc: make debugfs file creation failure non-fatal
nfsd: require an explicit option to enable pNFS
NFSD: Fix bad update of layout in nfsd4_return_file_layout
NFSD: Take care the return value from nfsd4_encode_stateid
NFSD: Printk blocklayout length and offset as format 0x%llx
nfsd: return correct lockowner when there is a race on hash insert
nfsd: return correct openowner when there is a race to put one in the hash
NFSD: Put exports after nfsd4_layout_verify fail
NFSD: Error out when register_shrinker() fail
NFSD: Take care the return value from nfsd4_decode_stateid
NFSD: Check layout type when returning client layouts
NFSD: restore trace event lost in mismerge
David S. Miller [Wed, 1 Apr 2015 16:30:39 +0000 (12:30 -0400)]
Merge branch 'bnx2'
Yuval Mintz says:
====================
bnx2x: kdump related fixes
This patch series aims to fix bnx2x driver issues when loading in kdump kernel.
Both issues fixed here would be fatal to the device, requiring full reset of
the system in order to recover, preventing the device from serving its purpose
in the kdump environment.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuval Mintz [Wed, 1 Apr 2015 07:02:20 +0000 (10:02 +0300)]
bnx2x: Fix kdump when iommu=on
When IOMM-vtd is active, once main kernel crashes unfinished DMAE transactions
will be blocked, putting the HW in an error state which will cause further
transactions to timeout.
Current employed logic uses wrong macros, causing the first function to be the
only function that cleanups that error state during its probe/load.
This patch allows all the functions to successfully re-load in kdump kernel.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuval Mintz [Wed, 1 Apr 2015 07:02:19 +0000 (10:02 +0300)]
bnx2x: Fix kdump on 4-port device
When running in a kdump kernel, it's very likely that due to sync. loss with
management firmware the first PCI function to probe and reach the previous
unload flow would decide it can reset the chip and continue onward. While doing
so, it will only close its own Rx port.
On a 4-port device where 2nd port on engine is a 1g-port, the 2nd port would
allow ingress traffic after the chip is reset [assuming it was active on the
first kernel]. This would later cause a HW attention.
This changes driver flow to close both ports' 1g capabilities during the
previous driver unload flow prior to the chip reset.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Wed, 1 Apr 2015 12:20:42 +0000 (14:20 +0200)]
mac80211: fix RX A-MPDU session reorder timer deletion
There's an issue with the way the RX A-MPDU reorder timer is
deleted that can cause a kernel crash like this:
* tid_rx is removed - call_rcu(ieee80211_free_tid_rx)
* station is destroyed
* reorder timer fires before ieee80211_free_tid_rx() runs,
accessing the station, thus potentially crashing due to
the use-after-free
The station deletion is protected by synchronize_net(), but
that isn't enough -- ieee80211_free_tid_rx() need not have
run when that returns (it deletes the timer.) We could use
rcu_barrier() instead of synchronize_net(), but that's much
more expensive.
Instead, to fix this, add a field tracking that the session
is being deleted. In this case, the only re-arming of the
timer happens with the reorder spinlock held, so make that
code not rearm it if the session is being deleted and also
delete the timer after setting that field. This ensures the
timer cannot fire after ___ieee80211_stop_rx_ba_session()
returns, which fixes the problem.
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Stefan Lippers-Hollmann [Mon, 30 Mar 2015 20:44:27 +0000 (22:44 +0200)]
x86/reboot: Add ASRock Q1900DC-ITX mainboard reboot quirk
The ASRock Q1900DC-ITX mainboard (Baytrail-D) hangs randomly in
both BIOS and UEFI mode while rebooting unless reboot=pci is
used. Add a quirk to reboot via the pci method.
The problem is very intermittent and hard to debug, it might succeed
rebooting just fine 40 times in a row - but fails half a dozen times
the next day. It seems to be slightly less common in BIOS CSM mode
than native UEFI (with the CSM disabled), but it does happen in either
mode. Since I've started testing this patch in late january, rebooting
has been 100% reliable.
Most of the time it already hangs during POST, but occasionally it
might even make it through the bootloader and the kernel might even
start booting, but then hangs before the mode switch. The same symptoms
occur with grub-efi, gummiboot and grub-pc, just as well as (at least)
kernel 3.16-3.19 and 4.0-rc6 (I haven't tried older kernels than 3.16).
Upgrading to the most current mainboard firmware of the ASRock
Q1900DC-ITX, version 1.20, does not improve the situation.
( Searching the web seems to suggest that other Bay Trail-D mainboards
might be affected as well. )
--
Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Cc: <stable@vger.kernel.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Link: http://lkml.kernel.org/r/20150330224427.0fb58e42@mir
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Greg Kroah-Hartman [Wed, 1 Apr 2015 11:51:02 +0000 (13:51 +0200)]
Merge tag 'iio-fixes-for-4.0d' of git://git./linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
IIO fixes for 4.0 set 4
A couple more IIO fixes.
* Fix check for HAS_IOMEM in the cc100001_adc driver to avoid build errors.
Rather curiously it was ORed with Regulator and clock support.
* vf610 driver was trying to use an ADC clock outside the possible
spec on some boards. The driver assumed a fixed clock speed previously
across all boards, but that is not true. This fix ensures that the
reported frequency is correct on all boards.
* The adis imu common code directly set the current trigger to the
driver supplied one. Unfortunately this didn't increase the use count
leading to a double free via a particular path of changing the trigger
then removing the driver.
Greg Kroah-Hartman [Wed, 1 Apr 2015 11:42:58 +0000 (13:42 +0200)]
Merge tag 'usb-serial-4.0-rc6' of git://git./linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for v4.0-rc6
Here are a few new device IDs.
Signed-off-by: Johan Hovold <johan@kernel.org>