cgroup: Call cgroup_release() before __exit_signal()

commit 6b115bf58e6f013ca75e7115aabcbd56c20ff31d upstream.

cgroup_release() calls cgroup_subsys->release() which is used by the
pids controller to uncharge its pid.  We want to use it to manage
iteration of dying tasks which requires putting it before
__unhash_process().  Move cgroup_release() above __exit_signal().
While this makes it uncharge before the pid is freed, pid is RCU freed
anyway and the window is very narrow.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

compat_ioctl: pppoe: fix PPPOEIOCSFWD handling

[ Upstream commit 055d88242a6046a1ceac3167290f054c72571cd9 ]

Support for handling the PPPOEIOCSFWD ioctl in compat mode was added in
linux-2.5.69 along with hundreds of other commands, but was always broken
sincen only the structure is compatible, but the command number is not,
due to the size being sizeof(size_t), or at first sizeof(sizeof((struct
sockaddr_pppox)), which is different on 64-bit architectures.

Guillaume Nault adds:

  And the implementation was broken until 2016 (see 29e73269aa4d ("pppoe:
  fix reference counting in PPPoE proxy")), and nobody ever noticed. I
  should probably have removed this ioctl entirely instead of fixing it.
  Clearly, it has never been used.

Fix it by adding a compat_ioctl handler for all pppoe variants that
translates the command number and then calls the regular ioctl function.

All other ioctl commands handled by pppoe are compatible between 32-bit
and 64-bit, and require compat_ptr() conversion.

This should apply to all stable kernels.

Acked-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

r8169: don't use MSI before RTL8168d

[ Upstream commit 003bd5b4a7b4a94b501e3a1e2e7c9df6b2a94ed4 ]

It was reported that after resuming from suspend network fails with
error "do_IRQ: 3.38 No irq handler for vector", see [0]. Enabling WoL
can work around the issue, but the only actual fix is to disable MSI.
So let's mimic the behavior of the vendor driver and disable MSI on
all chip versions before RTL8168d.

[0] https://bugzilla.kernel.org/show_bug.cgi?id=204079

Fixes: 6c6aa15fdea5 ("r8169: improve interrupt handling")
Reported-by: Dušan Dragić <dragic.dusan@gmail.com>
Tested-by: Dušan Dragić <dragic.dusan@gmail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5e: Prevent encap flow counter update async to user query

[ Upstream commit 90bb769291161cf25a818d69cf608c181654473e ]

This patch prevents a race between user invoked cached counters
query and a neighbor last usage updater.

The cached flow counter stats can be queried by calling
"mlx5_fc_query_cached" which provides the number of bytes and
packets that passed via this flow since the last time this counter
was queried.
It does so by reducting the last saved stats from the current, cached
stats and then updating the last saved stats with the cached stats.
It also provide the lastuse value for that flow.

Since "mlx5e_tc_update_neigh_used_value" needs to retrieve the
last usage time of encapsulation flows, it calls the flow counter
query method periodically and async to user queries of the flow counter
using cls_flower.
This call is causing the driver to update the last reported bytes and
packets from the cache and therefore, future user queries of the flow
stats will return lower than expected number for bytes and packets
since the last saved stats in the driver was updated async to the last
saved stats in cls_flower.

This causes wrong stats presentation of encapsulation flows to user.

Since the neighbor usage updater only needs the lastuse stats from the
cached counter, the fix is to use a dedicated lastuse query call that
returns the lastuse value without synching between the cached stats and
the last saved stats.

Fixes: f6dfb4c3f216 ("net/mlx5e: Update neighbour 'used' state using HW flow rules counters")
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5: Fix modify_cq_in alignment

[ Upstream commit 7a32f2962c56d9d8a836b4469855caeee8766bd4 ]

Fix modify_cq_in alignment to match the device specification.
After this fix the 'cq_umem_valid' field will be in the right offset.

Cc: <stable@vger.kernel.org> # 4.19
Fixes: bd37197554eb ("net/mlx5: Update mlx5_ifc with DEVX UID bits")
Signed-off-by: Edward Srouji <edwards@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tun: mark small packets as owned by the tap sock

[ Upstream commit 4b663366246be1d1d4b1b8b01245b2e88ad9e706 ]

- v1 -> v2: Move skb_set_owner_w to __tun_build_skb to reduce patch size

Small packets going out of a tap device go through an optimized code
path that uses build_skb() rather than sock_alloc_send_pskb(). The
latter calls skb_set_owner_w(), but the small packet code path does not.

The net effect is that small packets are not owned by the userland
application's socket (e.g. QEMU), while large packets are.
This can be seen with a TCP session, where packets are not owned when
the window size is small enough (around PAGE_SIZE), while they are once
the window grows (note that this requires the host to support virtio
tso for the guest to offload segmentation).
All this leads to inconsistent behaviour in the kernel, especially on
netfilter modules that uses sk->socket (e.g. xt_owner).

Fixes: 66ccbc9c87c2 ("tap: use build_skb() for small packet")
Signed-off-by: Alexis Bauvin <abauvin@scaleway.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: compat: allow tipc commands without arguments

[ Upstream commit 4da5f0018eef4c0de31675b670c80e82e13e99d1 ]

Commit 2753ca5d9009 ("tipc: fix uninit-value in tipc_nl_compat_doit")
broke older tipc tools that use compat interface (e.g. tipc-config from
tipcutils package):

% tipc-config -p
operation not supported

The commit started to reject TIPC netlink compat messages that do not
have attributes. It is too restrictive because some of such messages are
valid (they don't need any arguments):

% grep 'tx none' include/uapi/linux/tipc_config.h
#define  TIPC_CMD_NOOP              0x0000    /* tx none, rx none */
#define  TIPC_CMD_GET_MEDIA_NAMES   0x0002    /* tx none, rx media_name(s) */
#define  TIPC_CMD_GET_BEARER_NAMES  0x0003    /* tx none, rx bearer_name(s) */
#define  TIPC_CMD_SHOW_PORTS        0x0006    /* tx none, rx ultra_string */
#define  TIPC_CMD_GET_REMOTE_MNG    0x4003    /* tx none, rx unsigned */
#define  TIPC_CMD_GET_MAX_PORTS     0x4004    /* tx none, rx unsigned */
#define  TIPC_CMD_GET_NETID         0x400B    /* tx none, rx unsigned */
#define  TIPC_CMD_NOT_NET_ADMIN     0xC001    /* tx none, rx none */

This patch relaxes the original fix and rejects messages without
arguments only if such arguments are expected by a command (reg_type is
non zero).

Fixes: 2753ca5d9009 ("tipc: fix uninit-value in tipc_nl_compat_doit")
Cc: stable@vger.kernel.org
Signed-off-by: Taras Kondratiuk <takondra@cisco.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocelot: Cancel delayed work before wq destruction

[ Upstream commit c5d139697d5d9ecf9c7cd92d7d7838a173508900 ]

Make sure the delayed work for stats update is not pending before
wq destruction.
This fixes the module unload path.
The issue is there since day 1.

Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support")

Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFC: nfcmrvl: fix gpio-handling regression

[ Upstream commit c3953a3c2d3175d2f9f0304c9a1ba89e7743c5e4 ]

Fix two reset-gpio sanity checks which were never converted to use
gpio_is_valid(), and make sure to use -EINVAL to indicate a missing
reset line also for the UART-driver module parameter and for the USB
driver.

This specifically prevents the UART and USB drivers from incidentally
trying to request and use gpio 0, and also avoids triggering a WARN() in
gpio_to_desc() during probe when no valid reset line has been specified.

Fixes: e33a3f84f88f ("NFC: nfcmrvl: allow gpio 0 for reset signalling")
Reported-by: syzbot+cf35b76f35e068a1107f@syzkaller.appspotmail.com
Tested-by: syzbot+cf35b76f35e068a1107f@syzkaller.appspotmail.com
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/smc: do not schedule tx_work in SMC_CLOSED state

[ Upstream commit f9cedf1a9b1cdcfb0c52edb391d01771e43994a4 ]

The setsockopts options TCP_NODELAY and TCP_CORK may schedule the
tx worker. Make sure the socket is not yet moved into SMC_CLOSED
state (for instance by a shutdown SHUT_RDWR call).

Reported-by: syzbot+92209502e7aab127c75f@syzkaller.appspotmail.com
Reported-by: syzbot+b972214bb803a343f4fe@syzkaller.appspotmail.com
Fixes: 01d2f7e2cdd31 ("net/smc: sockopts TCP_NODELAY and TCP_CORK")
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: sched: use temporary variable for actions indexes

[ Upstream commit 7be8ef2cdbfe41a2e524b7c6cc3f8e6cfaa906e4 ]

Currently init call of all actions (except ipt) init their 'parm'
structure as a direct pointer to nla data in skb. This leads to race
condition when some of the filter actions were initialized successfully
(and were assigned with idr action index that was written directly
into nla data), but then were deleted and retried (due to following
action module missing or classifier-initiated retry), in which case
action init code tries to insert action to idr with index that was
assigned on previous iteration. During retry the index can be reused
by another action that was inserted concurrently, which causes
unintended action sharing between filters.
To fix described race condition, save action idr index to temporary
stack-allocated variable instead on nla data.

Fixes: 0190c1d452a9 ("net: sched: atomically check-allocate action")
Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com>
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net sched: update vlan action for batched events operations

[ Upstream commit b35475c5491a14c8ce7a5046ef7bcda8a860581a ]

Add get_fill_size() routine used to calculate the action size
when building a batch of events.

Fixes: c7e2b9689 ("sched: introduce vlan action")
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: sched: Fix a possible null-pointer dereference in dequeue_func()

[ Upstream commit 051c7b39be4a91f6b7d8c4548444e4b850f1f56c ]

In dequeue_func(), there is an if statement on line 74 to check whether
skb is NULL:
    if (skb)

When skb is NULL, it is used on line 77:
    prefetch(&skb->end);

Thus, a possible null-pointer dereference may occur.

To fix this bug, skb->end is used when skb is not NULL.

This bug is found by a static analysis tool STCheck written by us.

Fixes: 76e3cc126bb2 ("codel: Controlled Delay AQM")
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: qualcomm: rmnet: Fix incorrect UL checksum offload logic

[ Upstream commit a7cf3d24ee6081930feb4c830a7f6f16ebe31c49 ]

The udp_ip4_ind bit is set only for IPv4 UDP non-fragmented packets
so that the hardware can flip the checksum to 0xFFFF if the computed
checksum is 0 per RFC768.

However, this bit had to be set for IPv6 UDP non fragmented packets
as well per hardware requirements. Otherwise, IPv6 UDP packets
with computed checksum as 0 were transmitted by hardware and were
dropped in the network.

In addition to setting this bit for IPv6 UDP, the field is also
appropriately renamed to udp_ind as part of this change.

Fixes: 5eb5f8608ef1 ("net: qualcomm: rmnet: Add support for TX checksum offload")
Cc: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phylink: Fix flow control for fixed-link

[ Upstream commit 8aace4f3eba2a3ceb431e18683ea0e1ecbade5cd ]

In phylink_parse_fixedlink() the pl->link_config.advertising bits are AND
with pl->supported, pl->supported is zeroed and only the speed/duplex
modes and MII bits are set.
So pl->link_config.advertising always loses the flow control/pause bits.

By setting Pause and Asym_Pause bits in pl->supported, the flow control
work again when devicetree "pause" is set in fixes-link node and the MAC
advertise that is supports pause.

Results with this patch.

Legend:
- DT = 'Pause' is set in the fixed-link in devicetree.
- validate() = ‘Yes’ means phylink_set(mask, Pause) is set in the
  validate().
- flow = results reported my link is Up line.

+-----+------------+-------+
| DT  | validate() | flow  |
+-----+------------+-------+
| Yes | Yes        | rx/tx |
| No  | Yes        | off   |
| Yes | No         | off   |
+-----+------------+-------+

Fixes: 9525ae83959b ("phylink: add phylink infrastructure")
Signed-off-by: René van Dorst <opensource@vdorst.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5: Use reversed order when unregister devices

[ Upstream commit 08aa5e7da6bce1a1963f63cf32c2e7ad434ad578 ]

When lag is active, which is controlled by the bonded mlx5e netdev, mlx5
interface unregestering must happen in the reverse order where rdma is
unregistered (unloaded) first, to guarantee all references to the lag
context in hardware is removed, then remove mlx5e netdev interface which
will cleanup the lag context from hardware.

Without this fix during destroy of LAG interface, we observed following
errors:
 * mlx5_cmd_check:752:(pid 12556): DESTROY_LAG(0x843) op_mod(0x0) failed,
   status bad parameter(0x3), syndrome (0xe4ac33)
 * mlx5_cmd_check:752:(pid 12556): DESTROY_LAG(0x843) op_mod(0x0) failed,
   status bad parameter(0x3), syndrome (0xa5aee8).

Fixes: a31208b1e11d ("net/mlx5_core: New init and exit flow for mlx5_core")
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5e: always initialize frag->last_in_page

[ Upstream commit 60d60c8fbd8d1acf25b041ecd72ae4fa16e9405b ]

The commit 069d11465a80 ("net/mlx5e: RX, Enhance legacy Receive Queue
memory scheme") introduced an undefined behaviour below due to
"frag->last_in_page" is only initialized in mlx5e_init_frags_partition()
when,

if (next_frag.offset + frag_info[f].frag_stride > PAGE_SIZE)

or after bailed out the loop,

for (i = 0; i < mlx5_wq_cyc_get_size(&rq->wqe.wq); i++)

As the result, there could be some "frag" have uninitialized
value of "last_in_page".

Later, get_frag() obtains those "frag" and check "frag->last_in_page" in
mlx5e_put_rx_frag() and triggers the error during boot. Fix it by always
initializing "frag->last_in_page" to "false" in
mlx5e_init_frags_partition().

UBSAN: Undefined behaviour in
drivers/net/ethernet/mellanox/mlx5/core/en_rx.c:325:12
load of value 170 is not a valid value for type 'bool' (aka '_Bool')
Call trace:
 dump_backtrace+0x0/0x264
 show_stack+0x20/0x2c
 dump_stack+0xb0/0x104
 __ubsan_handle_load_invalid_value+0x104/0x128
 mlx5e_handle_rx_cqe+0x8e8/0x12cc [mlx5_core]
 mlx5e_poll_rx_cq+0xca8/0x1a94 [mlx5_core]
 mlx5e_napi_poll+0x17c/0xa30 [mlx5_core]
 net_rx_action+0x248/0x940
 __do_softirq+0x350/0x7b8
 irq_exit+0x200/0x26c
 __handle_domain_irq+0xc8/0x128
 gic_handle_irq+0x138/0x228
 el1_irq+0xb8/0x140
 arch_cpu_idle+0x1a4/0x348
 do_idle+0x114/0x1b0
 cpu_startup_entry+0x24/0x28
 rest_init+0x1ac/0x1dc
 arch_call_rest_init+0x10/0x18
 start_kernel+0x4d4/0x57c

Fixes: 069d11465a80 ("net/mlx5e: RX, Enhance legacy Receive Queue memory scheme")
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: fix ifindex collision during namespace removal

[ Upstream commit 55b40dbf0e76b4bfb9d8b3a16a0208640a9a45df ]

Commit aca51397d014 ("netns: Fix arbitrary net_device-s corruptions
on net_ns stop.") introduced a possibility to hit a BUG in case device
is returning back to init_net and two following conditions are met:
1) dev->ifindex value is used in a name of another "dev%d"
   device in init_net.
2) dev->name is used by another device in init_net.

Under real life circumstances this is hard to get. Therefore this has
been present happily for over 10 years. To reproduce:

$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 86:89:3f:86:61:29 brd ff:ff:ff:ff:ff:ff
3: enp0s2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff
$ ip netns add ns1
$ ip -n ns1 link add dummy1ns1 type dummy
$ ip -n ns1 link add dummy2ns1 type dummy
$ ip link set enp0s2 netns ns1
$ ip -n ns1 link set enp0s2 name dummy0
[  100.858894] virtio_net virtio0 dummy0: renamed from enp0s2
$ ip link add dev4 type dummy
$ ip -n ns1 a
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: dummy1ns1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 16:63:4c:38:3e:ff brd ff:ff:ff:ff:ff:ff
3: dummy2ns1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether aa:9e:86:dd:6b:5d brd ff:ff:ff:ff:ff:ff
4: dummy0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff
$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 86:89:3f:86:61:29 brd ff:ff:ff:ff:ff:ff
4: dev4: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 5a:e1:4a:b6:ec:f8 brd ff:ff:ff:ff:ff:ff
$ ip netns del ns1
[  158.717795] default_device_exit: failed to move dummy0 to init_net: -17
[  158.719316] ------------[ cut here ]------------
[  158.720591] kernel BUG at net/core/dev.c:9824!
[  158.722260] invalid opcode: 0000 [#1] SMP KASAN PTI
[  158.723728] CPU: 0 PID: 56 Comm: kworker/u2:1 Not tainted 5.3.0-rc1+ #18
[  158.725422] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014
[  158.727508] Workqueue: netns cleanup_net
[  158.728915] RIP: 0010:default_device_exit.cold+0x1d/0x1f
[  158.730683] Code: 84 e8 18 c9 3e fe 0f 0b e9 70 90 ff ff e8 36 e4 52 fe 89 d9 4c 89 e2 48 c7 c6 80 d6 25 84 48 c7 c7 20 c0 25 84 e8 f4 c8 3e
[  158.736854] RSP: 0018:ffff8880347e7b90 EFLAGS: 00010282
[  158.738752] RAX: 000000000000003b RBX: 00000000ffffffef RCX: 0000000000000000
[  158.741369] RDX: 0000000000000000 RSI: ffffffff8128013d RDI: ffffed10068fcf64
[  158.743418] RBP: ffff888033550170 R08: 000000000000003b R09: fffffbfff0b94b9c
[  158.745626] R10: fffffbfff0b94b9b R11: ffffffff85ca5cdf R12: ffff888032f28000
[  158.748405] R13: dffffc0000000000 R14: ffff8880335501b8 R15: 1ffff110068fcf72
[  158.750638] FS:  0000000000000000(0000) GS:ffff888036000000(0000) knlGS:0000000000000000
[  158.752944] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  158.755245] CR2: 00007fe8b45d21d0 CR3: 00000000340b4005 CR4: 0000000000360ef0
[  158.757654] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  158.760012] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  158.762758] Call Trace:
[  158.763882]  ? dev_change_net_namespace+0xbb0/0xbb0
[  158.766148]  ? devlink_nl_cmd_set_doit+0x520/0x520
[  158.768034]  ? dev_change_net_namespace+0xbb0/0xbb0
[  158.769870]  ops_exit_list.isra.0+0xa8/0x150
[  158.771544]  cleanup_net+0x446/0x8f0
[  158.772945]  ? unregister_pernet_operations+0x4a0/0x4a0
[  158.775294]  process_one_work+0xa1a/0x1740
[  158.776896]  ? pwq_dec_nr_in_flight+0x310/0x310
[  158.779143]  ? do_raw_spin_lock+0x11b/0x280
[  158.780848]  worker_thread+0x9e/0x1060
[  158.782500]  ? process_one_work+0x1740/0x1740
[  158.784454]  kthread+0x31b/0x420
[  158.786082]  ? __kthread_create_on_node+0x3f0/0x3f0
[  158.788286]  ret_from_fork+0x3a/0x50
[  158.789871] ---[ end trace defd6c657c71f936 ]---
[  158.792273] RIP: 0010:default_device_exit.cold+0x1d/0x1f
[  158.795478] Code: 84 e8 18 c9 3e fe 0f 0b e9 70 90 ff ff e8 36 e4 52 fe 89 d9 4c 89 e2 48 c7 c6 80 d6 25 84 48 c7 c7 20 c0 25 84 e8 f4 c8 3e
[  158.804854] RSP: 0018:ffff8880347e7b90 EFLAGS: 00010282
[  158.807865] RAX: 000000000000003b RBX: 00000000ffffffef RCX: 0000000000000000
[  158.811794] RDX: 0000000000000000 RSI: ffffffff8128013d RDI: ffffed10068fcf64
[  158.816652] RBP: ffff888033550170 R08: 000000000000003b R09: fffffbfff0b94b9c
[  158.820930] R10: fffffbfff0b94b9b R11: ffffffff85ca5cdf R12: ffff888032f28000
[  158.825113] R13: dffffc0000000000 R14: ffff8880335501b8 R15: 1ffff110068fcf72
[  158.829899] FS:  0000000000000000(0000) GS:ffff888036000000(0000) knlGS:0000000000000000
[  158.834923] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  158.838164] CR2: 00007fe8b45d21d0 CR3: 00000000340b4005 CR4: 0000000000360ef0
[  158.841917] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  158.845149] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Fix this by checking if a device with the same name exists in init_net
and fallback to original code - dev%d to allocate name - in case it does.

This was found using syzkaller.

Fixes: aca51397d014 ("netns: Fix arbitrary net_device-s corruptions on net_ns stop.")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: bridge: mcast: don't delete permanent entries when fast leave is enabled

[ Upstream commit 5c725b6b65067909548ac9ca9bc777098ec9883d ]

When permanent entries were introduced by the commit below, they were
exempt from timing out and thus igmp leave wouldn't affect them unless
fast leave was enabled on the port which was added before permanent
entries existed. It shouldn't matter if fast leave is enabled or not
if the user added a permanent entry it shouldn't be deleted on igmp
leave.

Before:
$ echo 1 > /sys/class/net/eth4/brport/multicast_fast_leave
$ bridge mdb add dev br0 port eth4 grp 229.1.1.1 permanent
$ bridge mdb show
dev br0 port eth4 grp 229.1.1.1 permanent

< join and leave 229.1.1.1 on eth4 >

$ bridge mdb show
$

After:
$ echo 1 > /sys/class/net/eth4/brport/multicast_fast_leave
$ bridge mdb add dev br0 port eth4 grp 229.1.1.1 permanent
$ bridge mdb show
dev br0 port eth4 grp 229.1.1.1 permanent

< join and leave 229.1.1.1 on eth4 >

$ bridge mdb show
dev br0 port eth4 grp 229.1.1.1 permanent

Fixes: ccb1c31a7a87 ("bridge: add flags to distinguish permanent mdb entires")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: bridge: delete local fdb on device init failure

[ Upstream commit d7bae09fa008c6c9a489580db0a5a12063b97f97 ]

On initialization failure we have to delete the local fdb which was
inserted due to the default pvid creation. This problem has been present
since the inception of default_pvid. Note that currently there are 2 cases:
1) in br_dev_init() when br_multicast_init() fails
2) if register_netdevice() fails after calling ndo_init()

This patch takes care of both since br_vlan_flush() is called on both
occasions. Also the new fdb delete would be a no-op on normal bridge
device destruction since the local fdb would've been already flushed by
br_dev_delete(). This is not an issue for ports since nbp_vlan_init() is
called last when adding a port thus nothing can fail after it.

Reported-by: syzbot+88533dc8b582309bf3ee@syzkaller.appspotmail.com
Fixes: 5be5a2df40f0 ("bridge: Add filtering support for default_pvid")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mvpp2: refactor MTU change code

[ Upstream commit 230bd958c2c846ee292aa38bc6b006296c24ca01 ]

The MTU change code can call napi_disable() with the device already down,
leading to a deadlock. Also, lot of code is duplicated unnecessarily.

Rework mvpp2_change_mtu() to avoid the deadlock and remove duplicated code.

Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mvpp2: fix panic on module removal

[ Upstream commit 944a83a2669ae8aa2c7664e79376ca7468eb0a2b ]

mvpp2 uses a delayed workqueue to gather traffic statistics.
On module removal the workqueue can be destroyed before calling
cancel_delayed_work_sync() on its works.
Fix it by moving the destroy_workqueue() call after mvpp2_port_remove().
Also remove an unneeded call to flush_workqueue()

    # rmmod mvpp2
    [ 2743.311722] mvpp2 f4000000.ethernet eth1: phy link down 10gbase-kr/10Gbps/Full
    [ 2743.320063] mvpp2 f4000000.ethernet eth1: Link is Down
    [ 2743.572263] mvpp2 f4000000.ethernet eth2: phy link down sgmii/1Gbps/Full
    [ 2743.580076] mvpp2 f4000000.ethernet eth2: Link is Down
    [ 2744.102169] mvpp2 f2000000.ethernet eth0: phy link down 10gbase-kr/10Gbps/Full
    [ 2744.110441] mvpp2 f2000000.ethernet eth0: Link is Down
    [ 2744.115614] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
    [ 2744.115615] Mem abort info:
    [ 2744.115616]   ESR = 0x96000005
    [ 2744.115617]   Exception class = DABT (current EL), IL = 32 bits
    [ 2744.115618]   SET = 0, FnV = 0
    [ 2744.115619]   EA = 0, S1PTW = 0
    [ 2744.115620] Data abort info:
    [ 2744.115621]   ISV = 0, ISS = 0x00000005
    [ 2744.115622]   CM = 0, WnR = 0
    [ 2744.115624] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000422681000
    [ 2744.115626] [0000000000000000] pgd=0000000000000000, pud=0000000000000000
    [ 2744.115630] Internal error: Oops: 96000005 [#1] SMP
    [ 2744.115632] Modules linked in: mvpp2(-) algif_hash af_alg nls_iso8859_1 nls_cp437 vfat fat xhci_plat_hcd m25p80 spi_nor xhci_hcd mtd usbcore i2c_mv64xxx sfp usb_common marvell10g phy_generic spi_orion mdio_i2c i2c_core mvmdio phylink sbsa_gwdt ip_tables x_tables autofs4 [last unloaded: mvpp2]
    [ 2744.115654] CPU: 3 PID: 8357 Comm: kworker/3:2 Not tainted 5.3.0-rc2 #1
    [ 2744.115655] Hardware name: Marvell 8040 MACCHIATOBin Double-shot (DT)
    [ 2744.115665] Workqueue: events_power_efficient phylink_resolve [phylink]
    [ 2744.115669] pstate: a0000085 (NzCv daIf -PAN -UAO)
    [ 2744.115675] pc : __queue_work+0x9c/0x4d8
    [ 2744.115677] lr : __queue_work+0x170/0x4d8
    [ 2744.115678] sp : ffffff801001bd50
    [ 2744.115680] x29: ffffff801001bd50 x28: ffffffc422597600
    [ 2744.115684] x27: ffffff80109ae6f0 x26: ffffff80108e4018
    [ 2744.115688] x25: 0000000000000003 x24: 0000000000000004
    [ 2744.115691] x23: ffffff80109ae6e0 x22: 0000000000000017
    [ 2744.115694] x21: ffffffc42c030000 x20: ffffffc42209e8f8
    [ 2744.115697] x19: 0000000000000000 x18: 0000000000000000
    [ 2744.115699] x17: 0000000000000000 x16: 0000000000000000
    [ 2744.115701] x15: 0000000000000010 x14: ffffffffffffffff
    [ 2744.115702] x13: ffffff8090e2b95f x12: ffffff8010e2b967
    [ 2744.115704] x11: ffffff8010906000 x10: 0000000000000040
    [ 2744.115706] x9 : ffffff80109223b8 x8 : ffffff80109223b0
    [ 2744.115707] x7 : ffffffc42bc00068 x6 : 0000000000000000
    [ 2744.115709] x5 : ffffffc42bc00000 x4 : 0000000000000000
    [ 2744.115710] x3 : 0000000000000000 x2 : 0000000000000000
    [ 2744.115712] x1 : 0000000000000008 x0 : ffffffc42c030000
    [ 2744.115714] Call trace:
    [ 2744.115716]  __queue_work+0x9c/0x4d8
    [ 2744.115718]  delayed_work_timer_fn+0x28/0x38
    [ 2744.115722]  call_timer_fn+0x3c/0x180
    [ 2744.115723]  expire_timers+0x60/0x168
    [ 2744.115724]  run_timer_softirq+0xbc/0x1e8
    [ 2744.115727]  __do_softirq+0x128/0x320
    [ 2744.115731]  irq_exit+0xa4/0xc0
    [ 2744.115734]  __handle_domain_irq+0x70/0xc0
    [ 2744.115735]  gic_handle_irq+0x58/0xa8
    [ 2744.115737]  el1_irq+0xb8/0x140
    [ 2744.115738]  console_unlock+0x3a0/0x568
    [ 2744.115740]  vprintk_emit+0x200/0x2a0
    [ 2744.115744]  dev_vprintk_emit+0x1c8/0x1e4
    [ 2744.115747]  dev_printk_emit+0x6c/0x7c
    [ 2744.115751]  __netdev_printk+0x104/0x1d8
    [ 2744.115752]  netdev_printk+0x60/0x70
    [ 2744.115756]  phylink_resolve+0x38c/0x3c8 [phylink]
    [ 2744.115758]  process_one_work+0x1f8/0x448
    [ 2744.115760]  worker_thread+0x54/0x500
    [ 2744.115762]  kthread+0x12c/0x130
    [ 2744.115764]  ret_from_fork+0x10/0x1c
    [ 2744.115768] Code: aa1403e0 97fffbbe aa0003f5 b4000700 (f9400261)

Fixes: 118d6298f6f0 ("net: mvpp2: add ethtool GOP statistics")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mlxsw: spectrum: Fix error path in mlxsw_sp_module_init()

[ Upstream commit 28fe79000e9b0a6f99959869947f1ca305f14599 ]

In case of sp2 pci driver registration fail, fix the error path to
start with sp1 pci driver unregister.

Fixes: c3ab435466d5 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipip: validate header length in ipip_tunnel_xmit

[ Upstream commit 47d858d0bdcd47cc1c6c9eeca91b091dd9e55637 ]

We need the same checks introduced by commit cb9f1b783850
("ip: validate header length on virtual device xmit") for
ipip tunnel.

Fixes: cb9f1b783850b ("ip: validate header length on virtual device xmit")
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ip6_tunnel: fix possible use-after-free on xmit

[ Upstream commit 01f5bffad555f8e22a61f4b1261fe09cf1b96994 ]

ip4ip6/ip6ip6 tunnels run iptunnel_handle_offloads on xmit which
can cause a possible use-after-free accessing iph/ipv6h pointer
since the packet will be 'uncloned' running pskb_expand_head if
it is a cloned gso skb.

Fixes: 0e9a709560db ("ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packets")
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ip6_gre: reload ipv6h in prepare_ip6gre_xmit_ipv6

[ Upstream commit 3bc817d665ac6d9de89f59df522ad86f5b5dfc03 ]

Since ip6_tnl_parse_tlv_enc_lim() can call pskb_may_pull()
which may change skb->data, so we need to re-load ipv6h at
the right place.

Fixes: 898b29798e36 ("ip6_gre: Refactor ip6gre xmit codes")
Cc: William Tu <u9012063@gmail.com>
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ife: error out when nla attributes are empty

[ Upstream commit c8ec4632c6ac9cda0e8c3d51aa41eeab66585bd5 ]

act_ife at least requires TCA_IFE_PARMS, so we have to bail out
when there is no attribute passed in.

Reported-by: syzbot+fbb5b288c9cb6a2eeac4@syzkaller.appspotmail.com
Fixes: ef6980b6becb ("introduce IFE action")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bnx2x: Disable multi-cos feature.

[ Upstream commit d1f0b5dce8fda09a7f5f04c1878f181d548e42f5 ]

Commit 3968d38917eb ("bnx2x: Fix Multi-Cos.") which enabled multi-cos
feature after prolonged time in driver added some regression causing
numerous issues (sudden reboots, tx timeout etc.) reported by customers.
We plan to backout this commit and submit proper fix once we have root
cause of issues reported with this feature enabled.

Fixes: 3968d38917eb ("bnx2x: Fix Multi-Cos.")
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

atm: iphase: Fix Spectre v1 vulnerability

[ Upstream commit ea443e5e98b5b74e317ef3d26bcaea54931ccdee ]

board is controlled by user-space, hence leading to a potential
exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

drivers/atm/iphase.c:2765 ia_ioctl() warn: potential spectre issue 'ia_dev' [r] (local cap)
drivers/atm/iphase.c:2774 ia_ioctl() warn: possible spectre second half.  'iadev'
drivers/atm/iphase.c:2782 ia_ioctl() warn: possible spectre second half.  'iadev'
drivers/atm/iphase.c:2816 ia_ioctl() warn: possible spectre second half.  'iadev'
drivers/atm/iphase.c:2823 ia_ioctl() warn: possible spectre second half.  'iadev'
drivers/atm/iphase.c:2830 ia_ioctl() warn: potential spectre issue '_ia_dev' [r] (local cap)
drivers/atm/iphase.c:2845 ia_ioctl() warn: possible spectre second half.  'iadev'
drivers/atm/iphase.c:2856 ia_ioctl() warn: possible spectre second half.  'iadev'

Fix this by sanitizing board before using it to index ia_dev and _ia_dev

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://lore.kernel.org/lkml/20180423164740.GY17484@dhcp22.suse.cz/

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB: directly cast the sockaddr union to aockaddr

Like commit 641114d2af31 ("RDMA: Directly cast the sockaddr union to
sockaddr") we need to quiet gcc 9 from warning about this crazy union.
That commit did not fix all of the warnings in 4.19 and older kernels
because the logic in roce_resolve_route_from_path() was rewritten
between 4.19 and 5.2 when that change happened.

Cc: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: Add quirk for HP X1200 PIXART OEM mouse

commit 49869d2ea9eecc105a10724c1abf035151a3c4e2 upstream.

The PixArt OEM mice are known for disconnecting every minute in
runlevel 1 or 3 if they are not always polled. So add quirk
ALWAYS_POLL for this one as well.

Jonathan Teh (@jonathan-teh) reported and tested the quirk.
Reference: https://github.com/sriemer/fix-linux-mouse/issues/15

Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de>
CC: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: wacom: fix bit shift for Cintiq Companion 2

commit 693c3dab4e50403f91bca4b52fc6d8562a3180f6 upstream.

The bit indicating BTN_6 on this device is overshifted
by 2 bits, resulting in the incorrect button being
reported.

Also fix copy-paste mistake in comments.

Signed-off-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Link: https://github.com/linuxwacom/xf86-input-wacom/issues/71
Fixes: c7f0522a1ad1 ("HID: wacom: Slim down wacom_intuos_pad processing")
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libnvdimm/bus: Fix wait_nvdimm_bus_probe_idle() ABBA deadlock

commit ca6bf264f6d856f959c4239cda1047b587745c67 upstream.

A multithreaded namespace creation/destruction stress test currently
deadlocks with the following lockup signature:

    INFO: task ndctl:2924 blocked for more than 122 seconds.
          Tainted: G           OE     5.2.0-rc4+ #3382
    "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
    ndctl           D    0  2924   1176 0x00000000
    Call Trace:
     ? __schedule+0x27e/0x780
     schedule+0x30/0xb0
     wait_nvdimm_bus_probe_idle+0x8a/0xd0 [libnvdimm]
     ? finish_wait+0x80/0x80
     uuid_store+0xe6/0x2e0 [libnvdimm]
     kernfs_fop_write+0xf0/0x1a0
     vfs_write+0xb7/0x1b0
     ksys_write+0x5c/0xd0
     do_syscall_64+0x60/0x240

     INFO: task ndctl:2923 blocked for more than 122 seconds.
           Tainted: G           OE     5.2.0-rc4+ #3382
     "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
     ndctl           D    0  2923   1175 0x00000000
     Call Trace:
      ? __schedule+0x27e/0x780
      ? __mutex_lock+0x489/0x910
      schedule+0x30/0xb0
      schedule_preempt_disabled+0x11/0x20
      __mutex_lock+0x48e/0x910
      ? nvdimm_namespace_common_probe+0x95/0x4d0 [libnvdimm]
      ? __lock_acquire+0x23f/0x1710
      ? nvdimm_namespace_common_probe+0x95/0x4d0 [libnvdimm]
      nvdimm_namespace_common_probe+0x95/0x4d0 [libnvdimm]
      __dax_pmem_probe+0x5e/0x210 [dax_pmem_core]
      ? nvdimm_bus_probe+0x1d0/0x2c0 [libnvdimm]
      dax_pmem_probe+0xc/0x20 [dax_pmem]
      nvdimm_bus_probe+0x90/0x2c0 [libnvdimm]
      really_probe+0xef/0x390
      driver_probe_device+0xb4/0x100

In this sequence an 'nd_dax' device is being probed and trying to take
the lock on its backing namespace to validate that the 'nd_dax' device
indeed has exclusive access to the backing namespace. Meanwhile, another
thread is trying to update the uuid property of that same backing
namespace. So one thread is in the probe path trying to acquire the
lock, and the other thread has acquired the lock and tries to flush the
probe path.

Fix this deadlock by not holding the namespace device_lock over the
wait_nvdimm_bus_probe_idle() synchronization step. In turn this requires
the device_lock to be held on entry to wait_nvdimm_bus_probe_idle() and
subsequently dropped internally to wait_nvdimm_bus_probe_idle().

Cc: <stable@vger.kernel.org>
Fixes: bf9bccc14c05 ("libnvdimm: pmem label sets and namespace instantiation")
Cc: Vishal Verma <vishal.l.verma@intel.com>
Tested-by: Jane Chu <jane.chu@oracle.com>
Link: https://lore.kernel.org/r/156341210094.292348.2384694131126767789.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libnvdimm/bus: Prepare the nd_ioctl() path to be re-entrant

commit 6de5d06e657acdbcf9637dac37916a4a5309e0f4 upstream.

In preparation for not holding a lock over the execution of nd_ioctl(),
update the implementation to allow multiple threads to be attempting
ioctls at the same time. The bus lock still prevents multiple in-flight
->ndctl() invocations from corrupting each other's state, but static
global staging buffers are moved to the heap.

Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Tested-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/156341208947.292348.10560140326807607481.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libnvdimm/region: Register badblocks before namespaces

commit 700cd033a82d466ad8f9615f9985525e45f8960a upstream.

Namespace activation expects to be able to reference region badblocks.
The following warning sometimes triggers when asynchronous namespace
activation races in front of the completion of namespace probing. Move
all possible namespace probing after region badblocks initialization.

Otherwise, lockdep sometimes catches the uninitialized state of the
badblocks seqlock with stack trace signatures like:

    INFO: trying to register non-static key.
    pmem2: detected capacity change from 0 to 136365211648
    the code is fine but needs lockdep annotation.
    turning off the locking correctness validator.
    CPU: 9 PID: 358 Comm: kworker/u80:5 Tainted: G           OE     5.2.0-rc4+ #3382
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
    Workqueue: events_unbound async_run_entry_fn
    Call Trace:
     dump_stack+0x85/0xc0
    pmem1.12: detected capacity change from 0 to 8589934592
     register_lock_class+0x56a/0x570
     ? check_object+0x140/0x270
     __lock_acquire+0x80/0x1710
     ? __mutex_lock+0x39d/0x910
     lock_acquire+0x9e/0x180
     ? nd_pfn_validate+0x28f/0x440 [libnvdimm]
     badblocks_check+0x93/0x1f0
     ? nd_pfn_validate+0x28f/0x440 [libnvdimm]
     nd_pfn_validate+0x28f/0x440 [libnvdimm]
     ? lockdep_hardirqs_on+0xf0/0x180
     nd_dax_probe+0x9a/0x120 [libnvdimm]
     nd_pmem_probe+0x6d/0x180 [nd_pmem]
     nvdimm_bus_probe+0x90/0x2c0 [libnvdimm]

Fixes: 48af2f7e52f4 ("libnvdimm, pfn: during init, clear errors...")
Cc: <stable@vger.kernel.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/156341208365.292348.1547528796026249120.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libnvdimm/bus: Prevent duplicate device_unregister() calls

commit 8aac0e2338916e273ccbd438a2b7a1e8c61749f5 upstream.

A multithreaded namespace creation/destruction stress test currently
fails with signatures like the following:

    sysfs group 'power' not found for kobject 'dax1.1'
    RIP: 0010:sysfs_remove_group+0x76/0x80
    Call Trace:
     device_del+0x73/0x370
     device_unregister+0x16/0x50
     nd_async_device_unregister+0x1e/0x30 [libnvdimm]
     async_run_entry_fn+0x39/0x160
     process_one_work+0x23c/0x5e0
     worker_thread+0x3c/0x390

    BUG: kernel NULL pointer dereference, address: 0000000000000020
    RIP: 0010:klist_put+0x1b/0x6c
    Call Trace:
     klist_del+0xe/0x10
     device_del+0x8a/0x2c9
     ? __switch_to_asm+0x34/0x70
     ? __switch_to_asm+0x40/0x70
     device_unregister+0x44/0x4f
     nd_async_device_unregister+0x22/0x2d [libnvdimm]
     async_run_entry_fn+0x47/0x15a
     process_one_work+0x1a2/0x2eb
     worker_thread+0x1b8/0x26e

Use the kill_device() helper to atomically resolve the race of multiple
threads issuing kill, device_unregister(), requests.

Reported-by: Jane Chu <jane.chu@oracle.com>
Reported-by: Erwin Tsaur <erwin.tsaur@oracle.com>
Fixes: 4d88a97aa9e8 ("libnvdimm, nvdimm: dimm driver and base libnvdimm device-driver...")
Cc: <stable@vger.kernel.org>
Link: https://github.com/pmem/ndctl/issues/96
Tested-by: Tested-by: Jane Chu <jane.chu@oracle.com>
Link: https://lore.kernel.org/r/156341207846.292348.10435719262819764054.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers/base: Introduce kill_device()

commit 00289cd87676e14913d2d8492d1ce05c4baafdae upstream.

The libnvdimm subsystem arranges for devices to be destroyed as a result
of a sysfs operation. Since device_unregister() cannot be called from
an actively running sysfs attribute of the same device libnvdimm
arranges for device_unregister() to be performed in an out-of-line async
context.

The driver core maintains a 'dead' state for coordinating its own racing
async registration / de-registration requests. Rather than add local
'dead' state tracking infrastructure to libnvdimm device objects, export
the existing state tracking via a new kill_device() helper.

The kill_device() helper simply marks the device as dead, i.e. that it
is on its way to device_del(), or returns that the device was already
dead. This can be used in advance of calling device_unregister() for
subsystems like libnvdimm that might need to handle multiple user
threads racing to delete a device.

This refactoring does not change any behavior, but it is a pre-requisite
for follow-on fixes and therefore marked for -stable.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Fixes: 4d88a97aa9e8 ("libnvdimm, nvdimm: dimm driver and base libnvdimm device-driver...")
Cc: <stable@vger.kernel.org>
Tested-by: Jane Chu <jane.chu@oracle.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/156341207332.292348.14959761496009347574.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

driver core: Establish order of operations for device_add and device_del via bitflag

commit 3451a495ef244a88ed6317a035299d835554d579 upstream.

Add an additional bit flag to the device_private struct named "dead".

This additional flag provides a guarantee that when a device_del is
executed on a given interface an async worker will not attempt to attach
the driver following the earlier device_del call. Previously this
guarantee was not present and could result in the device_del call
attempting to remove a driver from an interface only to have the async
worker attempt to probe the driver later when it finally completes the
asynchronous probe call.

One additional change added was that I pulled the check for dev->driver
out of the __device_attach_driver call and instead placed it in the
__device_attach_async_helper call. This was motivated by the fact that the
only other caller of this, __device_attach, had already taken the
device_lock() and checked for dev->driver. Instead of testing for this
twice in this path it makes more sense to just consolidate the dev->dead
and dev->driver checks together into one set of checks.

Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gcc-9: don't warn about uninitialized variable

commit cf676908846a06443fa5e6724ca3f5dd7460eca1 upstream.

I'm not sure what made gcc warn about this code now.  The 'ret' variable
does end up initialized in all cases, but it's definitely not obvious,
so the compiler is quite reasonable to warn about this.

So just add initialization to make it all much more obvious both to
compilers and to humans.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: fcoe: Embed fc_rport_priv in fcoe_rport structure

commit 023358b136d490ca91735ac6490db3741af5a8bd upstream.

Gcc-9 complains for a memset across pointer boundaries, which happens as
the code tries to allocate a flexible array on the stack.  Turns out we
cannot do this without relying on gcc-isms, so with this patch we'll embed
the fc_rport_priv structure into fcoe_rport, can use the normal
'container_of' outcast, and will only have to do a memset over one
structure.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.19.65

Documentation: Add swapgs description to the Spectre v1 documentation

commit 4c92057661a3412f547ede95715641d7ee16ddac upstream

Add documentation to the Spectre document about the new swapgs variant of
Spectre v1.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation/swapgs: Exclude ATOMs from speculation through SWAPGS

commit f36cf386e3fec258a341d446915862eded3e13d8 upstream

Intel provided the following information:

 On all current Atom processors, instructions that use a segment register
 value (e.g. a load or store) will not speculatively execute before the
 last writer of that segment retires. Thus they will not use a
 speculatively written segment value.

That means on ATOMs there is no speculation through SWAPGS, so the SWAPGS
entry paths can be excluded from the extra LFENCE if PTI is disabled.

Create a separate bug flag for the through SWAPGS speculation and mark all
out-of-order ATOMs and AMD/HYGON CPUs as not affected. The in-order ATOMs
are excluded from the whole mitigation mess anyway.

Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Tyler Hicks <tyhicks@canonical.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/entry/64: Use JMP instead of JMPQ

commit 64dbc122b20f75183d8822618c24f85144a5a94d upstream

Somehow the swapgs mitigation entry code patch ended up with a JMPQ
instruction instead of JMP, where only the short jump is needed.  Some
assembler versions apparently fail to optimize JMPQ into a two-byte JMP
when possible, instead always using a 7-byte JMP with relocation.  For
some reason that makes the entry code explode with a #GP during boot.

Change it back to "JMP" as originally intended.

Fixes: 18ec54fdd6d1 ("x86/speculation: Prepare entry code for Spectre v1 swapgs mitigations")
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation: Enable Spectre v1 swapgs mitigations

commit a2059825986a1c8143fd6698774fa9d83733bb11 upstream

The previous commit added macro calls in the entry code which mitigate the
Spectre v1 swapgs issue if the X86_FEATURE_FENCE_SWAPGS_* features are
enabled.  Enable those features where applicable.

The mitigations may be disabled with "nospectre_v1" or "mitigations=off".

There are different features which can affect the risk of attack:

- When FSGSBASE is enabled, unprivileged users are able to place any
  value in GS, using the wrgsbase instruction.  This means they can
  write a GS value which points to any value in kernel space, which can
  be useful with the following gadget in an interrupt/exception/NMI
  handler:

if (coming from user space)
swapgs
mov %gs:<percpu_offset>, %reg1
// dependent load or store based on the value of %reg
// for example: mov %(reg1), %reg2

  If an interrupt is coming from user space, and the entry code
  speculatively skips the swapgs (due to user branch mistraining), it
  may speculatively execute the GS-based load and a subsequent dependent
  load or store, exposing the kernel data to an L1 side channel leak.

  Note that, on Intel, a similar attack exists in the above gadget when
  coming from kernel space, if the swapgs gets speculatively executed to
  switch back to the user GS.  On AMD, this variant isn't possible
  because swapgs is serializing with respect to future GS-based
  accesses.

  NOTE: The FSGSBASE patch set hasn't been merged yet, so the above case
doesn't exist quite yet.

- When FSGSBASE is disabled, the issue is mitigated somewhat because
  unprivileged users must use prctl(ARCH_SET_GS) to set GS, which
  restricts GS values to user space addresses only.  That means the
  gadget would need an additional step, since the target kernel address
  needs to be read from user space first.  Something like:

if (coming from user space)
swapgs
mov %gs:<percpu_offset>, %reg1
mov (%reg1), %reg2
// dependent load or store based on the value of %reg2
// for example: mov %(reg2), %reg3

  It's difficult to audit for this gadget in all the handlers, so while
  there are no known instances of it, it's entirely possible that it
  exists somewhere (or could be introduced in the future).  Without
  tooling to analyze all such code paths, consider it vulnerable.

  Effects of SMAP on the !FSGSBASE case:

  - If SMAP is enabled, and the CPU reports RDCL_NO (i.e., not
    susceptible to Meltdown), the kernel is prevented from speculatively
    reading user space memory, even L1 cached values.  This effectively
    disables the !FSGSBASE attack vector.

  - If SMAP is enabled, but the CPU *is* susceptible to Meltdown, SMAP
    still prevents the kernel from speculatively reading user space
    memory.  But it does *not* prevent the kernel from reading the
    user value from L1, if it has already been cached.  This is probably
    only a small hurdle for an attacker to overcome.

Thanks to Dave Hansen for contributing the speculative_smap() function.

Thanks to Andrew Cooper for providing the inside scoop on whether swapgs
is serializing on AMD.

[ tglx: Fixed the USER fence decision and polished the comment as suggested
   by Dave Hansen ]

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation: Prepare entry code for Spectre v1 swapgs mitigations

commit 18ec54fdd6d18d92025af097cd042a75cf0ea24c upstream

Spectre v1 isn't only about array bounds checks.  It can affect any
conditional checks.  The kernel entry code interrupt, exception, and NMI
handlers all have conditional swapgs checks.  Those may be problematic in
the context of Spectre v1, as kernel code can speculatively run with a user
GS.

For example:

if (coming from user space)
swapgs
mov %gs:<percpu_offset>, %reg
mov (%reg), %reg1

When coming from user space, the CPU can speculatively skip the swapgs, and
then do a speculative percpu load using the user GS value.  So the user can
speculatively force a read of any kernel value.  If a gadget exists which
uses the percpu value as an address in another load/store, then the
contents of the kernel value may become visible via an L1 side channel
attack.

A similar attack exists when coming from kernel space.  The CPU can
speculatively do the swapgs, causing the user GS to get used for the rest
of the speculative window.

The mitigation is similar to a traditional Spectre v1 mitigation, except:

  a) index masking isn't possible; because the index (percpu offset)
     isn't user-controlled; and

  b) an lfence is needed in both the "from user" swapgs path and the
     "from kernel" non-swapgs path (because of the two attacks described
     above).

The user entry swapgs paths already have SWITCH_TO_KERNEL_CR3, which has a
CR3 write when PTI is enabled.  Since CR3 writes are serializing, the
lfences can be skipped in those cases.

On the other hand, the kernel entry swapgs paths don't depend on PTI.

To avoid unnecessary lfences for the user entry case, create two separate
features for alternative patching:

  X86_FEATURE_FENCE_SWAPGS_USER
  X86_FEATURE_FENCE_SWAPGS_KERNEL

Use these features in entry code to patch in lfences where needed.

The features aren't enabled yet, so there's no functional change.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/cpufeatures: Combine word 11 and 12 into a new scattered features word

commit acec0ce081de0c36459eea91647faf99296445a3 upstream

It's a waste for the four X86_FEATURE_CQM_* feature bits to occupy two
whole feature bits words. To better utilize feature words, re-define
word 11 to host scattered features and move the four X86_FEATURE_CQM_*
features into Linux defined word 11. More scattered features can be
added in word 11 in the future.

Rename leaf 11 in cpuid_leafs to CPUID_LNX_4 to reflect it's a
Linux-defined leaf.

Rename leaf 12 as CPUID_DUMMY which will be replaced by a meaningful
name in the next patch when CPUID.7.1:EAX occupies world 12.

Maximum number of RMID and cache occupancy scale are retrieved from
CPUID.0xf.1 after scattered CQM features are enumerated. Carve out the
code into a separate function.

KVM doesn't support resctrl now. So it's safe to move the
X86_FEATURE_CQM_* features to scattered features word 11 for KVM.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Aaron Lewis <aaronlewis@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Babu Moger <babu.moger@amd.com>
Cc: "Chang S. Bae" <chang.seok.bae@intel.com>
Cc: "Sean J Christopherson" <sean.j.christopherson@intel.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: kvm ML <kvm@vger.kernel.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Peter Feiner <pfeiner@google.com>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Ravi V Shankar <ravi.v.shankar@intel.com>
Cc: Sherry Hurwitz <sherry.hurwitz@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Lendacky <Thomas.Lendacky@amd.com>
Cc: x86 <x86@kernel.org>
Link: https://lkml.kernel.org/r/1560794416-217638-2-git-send-email-fenghua.yu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/cpufeatures: Carve out CQM features retrieval

commit 45fc56e629caa451467e7664fbd4c797c434a6c4 upstream

... into a separate function for better readability. Split out from a
patch from Fenghua Yu <fenghua.yu@intel.com> to keep the mechanical,
sole code movement separate for easy review.

No functional changes.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: x86@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: mpt3sas: Use 63-bit DMA addressing on SAS35 HBA

commit df9a606184bfdb5ae3ca9d226184e9489f5c24f7 upstream.

Although SAS3 & SAS3.5 IT HBA controllers support 64-bit DMA addressing, as
per hardware design, if DMA-able range contains all 64-bits
set (0xFFFFFFFF-FFFFFFFF) then it results in a firmware fault.

E.g. SGE's start address is 0xFFFFFFFF-FFFF000 and data length is 0x1000
bytes. when HBA tries to DMA the data at 0xFFFFFFFF-FFFFFFFF location then
HBA will fault the firmware.

Driver will set 63-bit DMA mask to ensure the above address will not be
used.

Cc: <stable@vger.kernel.org> # 4.19.63
Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/vdso: Prevent segfaults due to hoisted vclock reads

commit ff17bbe0bb405ad8b36e55815d381841f9fdeebc upstream.

GCC 5.5.0 sometimes cleverly hoists reads of the pvclock and/or hvclock
pages before the vclock mode checks.  This creates a path through
vclock_gettime() in which no vclock is enabled at all (due to disabled
TSC on old CPUs, for example) but the pvclock or hvclock page
nevertheless read.  This will segfault on bare metal.

This fixes commit 459e3a21535a ("gcc-9: properly declare the
{pv,hv}clock_page storage") in the sense that, before that commit, GCC
didn't seem to generate the offending code.  There was nothing wrong
with that commit per se, and -stable maintainers should backport this to
all supported kernels regardless of whether the offending commit was
present, since the same crash could just as easily be triggered by the
phase of the moon.

On GCC 9.1.1, this doesn't seem to affect the generated code at all, so
I'm not too concerned about performance regressions from this fix.

Cc: stable@vger.kernel.org
Cc: x86@kernel.org
Cc: Borislav Petkov <bp@alien8.de>
Reported-by: Duncan Roe <duncan_roe@optusnet.com.au>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gcc-9: properly declare the {pv,hv}clock_page storage

commit 459e3a21535ae3c7a9a123650e54f5c882b8fcbf upstream.

The pvlock_page and hvclock_page variables are (as the name implies)
addresses to pages, created by the linker script.

But we declared them as just "extern u8" variables, which _works_, but
now that gcc does some more bounds checking, it causes warnings like

    warning: array subscript 1 is outside array bounds of ‘u8[1]’

when we then access more than one byte from those variables.

Fix this by simply making the declaration of the variables match
reality, which makes the compiler happy too.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

objtool: Support GCC 9 cold subfunction naming scheme

commit bcb6fb5da77c2a228adf07cc9cb1a0c2aa2001c6 upstream.

Starting with GCC 8, a lot of unlikely code was moved out of line to
"cold" subfunctions in .text.unlikely.

For example, the unlikely bits of:

  irq_do_set_affinity()

are moved out to the following subfunction:

  irq_do_set_affinity.cold.49()

Starting with GCC 9, the numbered suffix has been removed.  So in the
above example, the cold subfunction is instead:

  irq_do_set_affinity.cold()

Tweak the objtool subfunction detection logic so that it detects both
GCC 8 and GCC 9 naming schemes.

Reported-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/015e9544b1f188d36a7f02fa31e9e95629aa5f50.1541040800.git.jpoimboe@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARC: enable uboot support unconditionally

commit 493a2f812446e92bcb1e69a77381b4d39808d730 upstream.

After reworking U-boot args handling code and adding paranoid
arguments check we can eliminate CONFIG_ARC_UBOOT_SUPPORT and
enable uboot support unconditionally.

For JTAG case we can assume that core registers will come up
reset value of 0 or in worst case we rely on user passing
'-on=clear_regs' to Metaware debugger.

Cc: stable@vger.kernel.org
Tested-by: Corentin LABBE <clabbe@baylibre.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

eeprom: at24: make spd world-readable again

commit 25e5ef302c24a6fead369c0cfe88c073d7b97ca8 upstream.

The integration of the at24 driver into the nvmem framework broke the
world-readability of spd EEPROMs. Fix it.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: stable@vger.kernel.org
Fixes: 57d155506dd5 ("eeprom: at24: extend driver to plug into the NVMEM framework")
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
[Bartosz: backported to v4.19.y]
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/gvt: fix incorrect cache entry for guest page mapping

commit 7366aeb77cd840f3edea02c65065d40affaa7f45 upstream.

GPU hang observed during the guest OCL conformance test which is caused
by THP GTT feature used durning the test.

It was observed the same GFN with different size (4K and 2M) requested
from the guest in GVT. So during the guest page dma map stage, it is
required to unmap first with orginal size and then remap again with
requested size.

Fixes: b901b252b6cf ("drm/i915/gvt: Add 2M huge gtt support")
Cc: stable@vger.kernel.org
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Xiaolin Zhang <xiaolin.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/hfi1: Check for error on call to alloc_rsm_map_table

commit cd48a82087231fdba0e77521102386c6ed0168d6 upstream.

The call to alloc_rsm_map_table does not check if the kmalloc fails.
Check for a NULL on alloc, and bail if it fails.

Fixes: 372cc85a13c9 ("IB/hfi1: Extract RSM map table init from QOS")
Link: https://lore.kernel.org/r/20190715164521.74174.27047.stgit@awfm-01.aw.intel.com
Cc: <stable@vger.kernel.org>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: John Fleck <john.fleck@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/mlx5: Fix RSS Toeplitz setup to be aligned with the HW specification

commit b7165bd0d6cbb93732559be6ea8774653b204480 upstream.

The specification for the Toeplitz function doesn't require to set the key
explicitly to be symmetric. In case a symmetric functionality is required
a symmetric key can be simply used.

Wrongly forcing the algorithm to symmetric causes the wrong packet
distribution and a performance degradation.

Link: https://lore.kernel.org/r/20190723065733.4899-7-leon@kernel.org
Cc: <stable@vger.kernel.org> # 4.7
Fixes: 28d6137008b2 ("IB/mlx5: Add RSS QP support")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Alex Vainman <alexv@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/mlx5: Fix clean_mr() to work in the expected order

commit b9332dad987018745a0c0bb718d12dacfa760489 upstream.

Any dma map underlying the MR should only be freed once the MR is fenced
at the hardware.

As of the above we first destroy the MKEY and just after that can safely
call to dma_unmap_single().

Link: https://lore.kernel.org/r/20190723065733.4899-6-leon@kernel.org
Cc: <stable@vger.kernel.org> # 4.3
Fixes: 8a187ee52b04 ("IB/mlx5: Support the new memory registration API")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/mlx5: Move MRs to a kernel PD when freeing them to the MR cache

commit 9ec4483a3f0f71a228a5933bc040441322bfb090 upstream.

Fix unreg_umr to move the MR to a kernel owned PD (i.e. the UMR PD) which
can't be accessed by userspace.

This ensures that nothing can continue to access the MR once it has been
placed in the kernels cache for reuse.

MRs in the cache continue to have their HW state, including DMA tables,
present. Even though the MR has been invalidated, changing the PD provides
an additional layer of protection against use of the MR.

Link: https://lore.kernel.org/r/20190723065733.4899-5-leon@kernel.org
Cc: <stable@vger.kernel.org> # 3.10
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/mlx5: Use direct mkey destroy command upon UMR unreg failure

commit afd1417404fba6dbfa6c0a8e5763bd348da682e4 upstream.

Use a direct firmware command to destroy the mkey in case the unreg UMR
operation has failed.

This prevents a case that a mkey will leak out from the cache post a
failure to be destroyed by a UMR WR.

In case the MR cache limit didn't reach a call to add another entry to the
cache instead of the destroyed one is issued.

In addition, replaced a warn message to WARN_ON() as this flow is fatal
and can't happen unless some bug around.

Link: https://lore.kernel.org/r/20190723065733.4899-4-leon@kernel.org
Cc: <stable@vger.kernel.org> # 4.10
Fixes: 49780d42dfc9 ("IB/mlx5: Expose MR cache for mlx5_ib")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/mlx5: Fix unreg_umr to ignore the mkey state

commit 6a053953739d23694474a5f9c81d1a30093da81a upstream.

Fix unreg_umr to ignore the mkey state and do not fail if was freed.  This
prevents a case that a user space application already changed the mkey
state to free and then the UMR operation will fail leaving the mkey in an
inappropriate state.

Link: https://lore.kernel.org/r/20190723065733.4899-3-leon@kernel.org
Cc: <stable@vger.kernel.org> # 3.19
Fixes: 968e78dd9644 ("IB/mlx5: Enhance UMR support to allow partial page table update")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/swiotlb: fix condition for calling xen_destroy_contiguous_region()

commit 50f6393f9654c561df4cdcf8e6cfba7260143601 upstream.

The condition in xen_swiotlb_free_coherent() for deciding whether to
call xen_destroy_contiguous_region() is wrong: in case the region to
be freed is not contiguous calling xen_destroy_contiguous_region() is
the wrong thing to do: it would result in inconsistent mappings of
multiple PFNs to the same MFN. This will lead to various strange
crashes or data corruption.

Instead of calling xen_destroy_contiguous_region() in that case a
warning should be issued as that situation should never occur.

Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nbd: replace kill_bdev() with __invalidate_device() again

commit 2b5c8f0063e4b263cf2de82029798183cf85c320 upstream.

Commit abbbdf12497d ("replace kill_bdev() with __invalidate_device()")
once did this, but 29eaadc03649 ("nbd: stop using the bdev everywhere")
resurrected kill_bdev() and it has been there since then. So buffer_head
mappings still get killed on a server disconnection, and we can still
hit the BUG_ON on a filesystem on the top of the nbd device.

  EXT4-fs (nbd0): mounted filesystem with ordered data mode. Opts: (null)
  block nbd0: Receive control failed (result -32)
  block nbd0: shutting down sockets
  print_req_error: I/O error, dev nbd0, sector 66264 flags 3000
  EXT4-fs warning (device nbd0): htree_dirblock_to_tree:979: inode #2: lblock 0: comm ls: error -5 reading directory block
  print_req_error: I/O error, dev nbd0, sector 2264 flags 3000
  EXT4-fs error (device nbd0): __ext4_get_inode_loc:4690: inode #2: block 283: comm ls: unable to read itable block
  EXT4-fs error (device nbd0) in ext4_reserve_inode_write:5894: IO failure
  ------------[ cut here ]------------
  kernel BUG at fs/buffer.c:3057!
  invalid opcode: 0000 [#1] SMP PTI
  CPU: 7 PID: 40045 Comm: jbd2/nbd0-8 Not tainted 5.1.0-rc3+ #4
  Hardware name: Amazon EC2 m5.12xlarge/, BIOS 1.0 10/16/2017
  RIP: 0010:submit_bh_wbc+0x18b/0x190
  ...
  Call Trace:
   jbd2_write_superblock+0xf1/0x230 [jbd2]
   ? account_entity_enqueue+0xc5/0xf0
   jbd2_journal_update_sb_log_tail+0x94/0xe0 [jbd2]
   jbd2_journal_commit_transaction+0x12f/0x1d20 [jbd2]
   ? __switch_to_asm+0x40/0x70
   ...
   ? lock_timer_base+0x67/0x80
   kjournald2+0x121/0x360 [jbd2]
   ? remove_wait_queue+0x60/0x60
   kthread+0xf8/0x130
   ? commit_timeout+0x10/0x10 [jbd2]
   ? kthread_bind+0x10/0x10
   ret_from_fork+0x35/0x40

With __invalidate_device(), I no longer hit the BUG_ON with sync or
unmount on the disconnected device.

Fixes: 29eaadc03649 ("nbd: stop using the bdev everywhere")
Cc: linux-block@vger.kernel.org
Cc: Ratna Manoj Bolla <manoj.br@gmail.com>
Cc: nbd@other.debian.org
Cc: stable@vger.kernel.org
Cc: David Woodhouse <dwmw@amazon.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Munehisa Kamata <kamatam@amazon.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: cpufeature: Fix feature comparison for CTR_EL0.{CWG,ERG}

commit 147b9635e6347104b91f48ca9dca61eb0fbf2a54 upstream.

If CTR_EL0.{CWG,ERG} are 0b0000 then they must be interpreted to have
their architecturally maximum values, which defeats the use of
FTR_HIGHER_SAFE when sanitising CPU ID registers on heterogeneous
machines.

Introduce FTR_HIGHER_OR_ZERO_SAFE so that these fields effectively
saturate at zero.

Fixes: 3c739b571084 ("arm64: Keep track of CPU feature registers")
Cc: <stable@vger.kernel.org> # 4.4.x-
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: compat: Allow single-byte watchpoints on all addresses

commit 849adec41203ac5837c40c2d7e08490ffdef3c2c upstream.

Commit d968d2b801d8 ("ARM: 7497/1: hw_breakpoint: allow single-byte
watchpoints on all addresses") changed the validation requirements for
hardware watchpoints on arch/arm/. Update our compat layer to implement
the same relaxation.

Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/perf: arm_pmu: Fix failure path in PM notifier

commit 0d7fd70f26039bd4b33444ca47f0e69ce3ae0354 upstream.

Handling of the CPU_PM_ENTER_FAILED transition in the Arm PMU PM
notifier code incorrectly skips restoration of the counters. Fix the
logic so that CPU_PM_ENTER_FAILED follows the same path as CPU_PM_EXIT.

Cc: <stable@vger.kernel.org>
Fixes: da4e4f18afe0f372 ("drivers/perf: arm_pmu: implement CPU_PM notifier")
Reported-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Fix build of compressed kernel even with debug enabled

commit 3fe6c873af2f2247544debdbe51ec29f690a2ccf upstream.

With debug info enabled (CONFIG_DEBUG_INFO=y) the resulting vmlinux may get
that huge that we need to increase the start addresss for the decompression
text section otherwise one will face a linker error.

Reported-by: Sven Schnelle <svens@stackframe.org>
Tested-by: Sven Schnelle <svens@stackframe.org>
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cgroup: kselftest: relax fs_spec checks

commit b59b1baab789eacdde809135542e3d4f256f6878 upstream.

On my laptop most memcg kselftests were being skipped because it claimed
cgroup v2 hierarchy wasn't mounted, but this isn't correct.  Instead, it
seems current systemd HEAD mounts it with the name "cgroup2" instead of
"cgroup":

    % grep cgroup /proc/mounts
    cgroup2 /sys/fs/cgroup cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate 0 0

I can't think of a reason to need to check fs_spec explicitly
since it's arbitrary, so we can just rely on fs_vfstype.

After these changes, `make TARGETS=cgroup kselftest` actually runs the
cgroup v2 tests in more cases.

Link: http://lkml.kernel.org/r/20190723210737.GA487@chrisdown.name
Signed-off-by: Chris Down <chris@chrisdown.name>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/dasd: fix endless loop after read unit address configuration

commit 41995342b40c418a47603e1321256d2c4a2ed0fb upstream.

After getting a storage server event that causes the DASD device driver
to update its unit address configuration during a device shutdown there is
the possibility of an endless loop in the device driver.

In the system log there will be ongoing DASD error messages with RC: -19.

The reason is that the loop starting the ruac request only terminates when
the retry counter is decreased to 0. But in the sleep_on function there are
early exit paths that do not decrease the retry counter.

Prevent an endless loop by handling those cases separately.

Remove the unnecessary do..while loop since the sleep_on function takes
care of retries by itself.

Fixes: 8e09f21574ea ("[S390] dasd: add hyper PAV support to DASD device driver, part 1")
Cc: stable@vger.kernel.org # 2.6.25+
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: vmscan: check if mem cgroup is disabled or not before calling memcg slab shrinker

commit fa1e512fac717f34e7c12d7a384c46e90a647392 upstream.

Shakeel Butt reported premature oom on kernel with
"cgroup_disable=memory" since mem_cgroup_is_root() returns false even
though memcg is actually NULL.  The drop_caches is also broken.

It is because commit aeed1d325d42 ("mm/vmscan.c: generalize
shrink_slab() calls in shrink_node()") removed the !memcg check before
!mem_cgroup_is_root().  And, surprisingly root memcg is allocated even
though memory cgroup is disabled by kernel boot parameter.

Add mem_cgroup_disabled() check to make reclaimer work as expected.

Link: http://lkml.kernel.org/r/1563385526-20805-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: aeed1d325d42 ("mm/vmscan.c: generalize shrink_slab() calls in shrink_node()")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reported-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jan Hadrava <had@kam.mff.cuni.cz>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org> [4.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: Fix 1-minute detection delay when i915 module is not available

commit 74bf71ed792ab0f64631cc65ccdb54c356c36d45 upstream.

Distribution installation images such as Debian include different sets
of modules which can be downloaded dynamically.  Such images may notably
include the hda sound modules but not the i915 DRM module, even if the
latter was enabled at build time, as reported on
https://bugs.debian.org/931507

In such a case hdac_i915 would be linked in and try to load the i915
module, fail since it is not there, but still wait for a whole minute
before giving up binding with it.

This fixes such as case by only waiting for the binding if the module
was properly loaded (or module support is disabled, in which case i915
is already compiled-in anyway).

Fixes: f9b54e1961c7 ("ALSA: hda/i915: Allow delayed i915 audio component binding")
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selinux: fix memory leak in policydb_init()

commit 45385237f65aeee73641f1ef737d7273905a233f upstream.

Since roles_init() adds some entries to the role hash table, we need to
destroy also its keys/values on error, otherwise we get a memory leak in
the error path.

Cc: <stable@vger.kernel.org>
Reported-by: syzbot+fee3a14d4cdf92646287@syzkaller.appspotmail.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: micron: handle on-die "ECC-off" devices correctly

commit 8493b2a06fc5b77ef5c579dc32b12761f7b7a84c upstream.

Some devices are not supposed to support on-die ECC but experience
shows that internal ECC machinery can actually be enabled through the
"SET FEATURE (EFh)" command, even if a read of the "READ ID Parameter
Tables" returns that it is not.

Currently, the driver checks the "READ ID Parameter" field directly
after having enabled the feature. If the check fails it returns
immediately but leaves the ECC on. When using buggy chips like
MT29F2G08ABAGA and MT29F2G08ABBGA, all future read/program cycles will
go through the on-die ECC, confusing the host controller which is
supposed to be the one handling correction.

To address this in a common way we need to turn off the on-die ECC
directly after reading the "READ ID Parameter" and before checking the
"ECC status".

Cc: stable@vger.kernel.org
Fixes: dbc44edbf833 ("mtd: rawnand: micron: Fix on-die ECC detection logic")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/hfi1: Fix Spectre v1 vulnerability

commit 6497d0a9c53df6e98b25e2b79f2295d7caa47b6e upstream.

sl is controlled by user-space, hence leading to a potential
exploitation of the Spectre variant 1 vulnerability.

Fix this by sanitizing sl before using it to index ibp->sl_to_sc.

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://lore.kernel.org/lkml/20180423164740.GY17484@dhcp22.suse.cz/

Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Link: https://lore.kernel.org/r/20190731175428.GA16736@embeddedor
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpiolib: fix incorrect IRQ requesting of an active-low lineevent

commit 223ecaf140b1dd1c1d2a1a1d96281efc5c906984 upstream.

When a pin is active-low, logical trigger edge should be inverted to match
the same interrupt opportunity.

For example, a button pushed triggers falling edge in ACTIVE_HIGH case; in
ACTIVE_LOW case, the button pushed triggers rising edge. For user space the
IRQ requesting doesn't need to do any modification except to configuring
GPIOHANDLE_REQUEST_ACTIVE_LOW.

For example, we want to catch the event when the button is pushed. The
button on the original board drives level to be low when it is pushed, and
drives level to be high when it is released.

In user space we can do:

req.handleflags = GPIOHANDLE_REQUEST_INPUT;
req.eventflags = GPIOEVENT_REQUEST_FALLING_EDGE;

while (1) {
read(fd, &dat, sizeof(dat));
if (dat.id == GPIOEVENT_EVENT_FALLING_EDGE)
printf("button pushed\n");
}

Run the same logic on another board which the polarity of the button is
inverted; it drives level to be high when pushed, and level to be low when
released. For this inversion we add flag GPIOHANDLE_REQUEST_ACTIVE_LOW:

req.handleflags = GPIOHANDLE_REQUEST_INPUT |
GPIOHANDLE_REQUEST_ACTIVE_LOW;
req.eventflags = GPIOEVENT_REQUEST_FALLING_EDGE;

At the result, there are no any events caught when the button is pushed.
By the way, button releasing will emit a "falling" event. The timing of
"falling" catching is not expected.

Cc: stable@vger.kernel.org
Signed-off-by: Michael Wu <michael.wu@vatics.com>
Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: meson-mx-sdio: Fix misuse of GENMASK macro

commit 665e985c2f41bebc3e6cee7e04c36a44afbc58f7 upstream.

Arguments are supposed to be ordered high then low.

Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Fixes: ed80a13bb4c4 ("mmc: meson-mx-sdio: Add a driver for the Amlogic
Meson8 and Meson8b SoCs")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: dw_mmc: Fix occasional hang after tuning on eMMC

commit ba2d139b02ba684c6c101de42fed782d6cd2b997 upstream.

In commit 46d179525a1f ("mmc: dw_mmc: Wait for data transfer after
response errors.") we fixed a tuning-induced hang that I saw when
stress testing tuning on certain SD cards.  I won't re-hash that whole
commit, but the summary is that as a normal part of tuning you need to
deal with transfer errors and there were cases where these transfer
errors was putting my system into a bad state causing all future
transfers to fail.  That commit fixed handling of the transfer errors
for me.

In downstream Chrome OS my fix landed and had the same behavior for
all SD/MMC commands.  However, it looks like when the commit landed
upstream we limited it to only SD tuning commands.  Presumably this
was to try to get around problems that Alim Akhtar reported on exynos
[1].

Unfortunately while stress testing reboots (and suspend/resume) on
some rk3288-based Chromebooks I found the same problem on the eMMC on
some of my Chromebooks (the ones with Hynix eMMC).  Since the eMMC
tuning command is different (MMC_SEND_TUNING_BLOCK_HS200
vs. MMC_SEND_TUNING_BLOCK) we were basically getting back into the
same situation.

I'm hoping that whatever problems exynos was having in the past are
somehow magically fixed now and we can make the behavior the same for
all commands.

[1] https://lkml.kernel.org/r/CAGOxZ53WfNbaMe0_AM0qBqU47kAfgmPBVZC8K8Y-_J3mDMqW4A@mail.gmail.com

Fixes: 46d179525a1f ("mmc: dw_mmc: Wait for data transfer after response errors.")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Alim Akhtar <alim.akhtar@gmail.com>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: fix race leading to fs corruption after transaction abort

commit cb2d3daddbfb6318d170e79aac1f7d5e4d49f0d7 upstream.

When one transaction is finishing its commit, it is possible for another
transaction to start and enter its initial commit phase as well. If the
first ends up getting aborted, we have a small time window where the second
transaction commit does not notice that the previous transaction aborted
and ends up committing, writing a superblock that points to btrees that
reference extent buffers (nodes and leafs) that were not persisted to disk.
The consequence is that after mounting the filesystem again, we will be
unable to load some btree nodes/leafs, either because the content on disk
is either garbage (or just zeroes) or corresponds to the old content of a
previouly COWed or deleted node/leaf, resulting in the well known error
messages "parent transid verify failed on ...".
The following sequence diagram illustrates how this can happen.

        CPU 1                                           CPU 2

 <at transaction N>

 btrfs_commit_transaction()
   (...)
   --> sets transaction state to
       TRANS_STATE_UNBLOCKED
   --> sets fs_info->running_transaction
       to NULL

                                                    (...)
                                                    btrfs_start_transaction()
                                                      start_transaction()
                                                        wait_current_trans()
                                                          --> returns immediately
                                                              because
                                                              fs_info->running_transaction
                                                              is NULL
                                                        join_transaction()
                                                          --> creates transaction N + 1
                                                          --> sets
                                                              fs_info->running_transaction
                                                              to transaction N + 1
                                                          --> adds transaction N + 1 to
                                                              the fs_info->trans_list list
                                                        --> returns transaction handle
                                                            pointing to the new
                                                            transaction N + 1
                                                    (...)

                                                    btrfs_sync_file()
                                                      btrfs_start_transaction()
                                                        --> returns handle to
                                                            transaction N + 1
                                                      (...)

   btrfs_write_and_wait_transaction()
     --> writeback of some extent
         buffer fails, returns an
 error
   btrfs_handle_fs_error()
     --> sets BTRFS_FS_STATE_ERROR in
         fs_info->fs_state
   --> jumps to label "scrub_continue"
   cleanup_transaction()
     btrfs_abort_transaction(N)
       --> sets BTRFS_FS_STATE_TRANS_ABORTED
           flag in fs_info->fs_state
       --> sets aborted field in the
           transaction and transaction
   handle structures, for
           transaction N only
     --> removes transaction from the
         list fs_info->trans_list
                                                      btrfs_commit_transaction(N + 1)
                                                        --> transaction N + 1 was not
    aborted, so it proceeds
                                                        (...)
                                                        --> sets the transaction's state
                                                            to TRANS_STATE_COMMIT_START
                                                        --> does not find the previous
                                                            transaction (N) in the
                                                            fs_info->trans_list, so it
                                                            doesn't know that transaction
                                                            was aborted, and the commit
                                                            of transaction N + 1 proceeds
                                                        (...)
                                                        --> sets transaction N + 1 state
                                                            to TRANS_STATE_UNBLOCKED
                                                        btrfs_write_and_wait_transaction()
                                                          --> succeeds writing all extent
                                                              buffers created in the
                                                              transaction N + 1
                                                        write_all_supers()
                                                           --> succeeds
                                                           --> we now have a superblock on
                                                               disk that points to trees
                                                               that refer to at least one
                                                               extent buffer that was
                                                               never persisted

So fix this by updating the transaction commit path to check if the flag
BTRFS_FS_STATE_TRANS_ABORTED is set on fs_info->fs_state if after setting
the transaction to the TRANS_STATE_COMMIT_START we do not find any previous
transaction in the fs_info->trans_list. If the flag is set, just fail the
transaction commit with -EROFS, as we do in other places. The exact error
code for the previous transaction abort was already logged and reported.

Fixes: 49b25e0540904b ("btrfs: enhance transaction abort infrastructure")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: fix incremental send failure after deduplication

commit b4f9a1a87a48c255bb90d8a6c3d555a1abb88130 upstream.

When doing an incremental send operation we can fail if we previously did
deduplication operations against a file that exists in both snapshots. In
that case we will fail the send operation with -EIO and print a message
to dmesg/syslog like the following:

  BTRFS error (device sdc): Send: inconsistent snapshot, found updated \
  extent for inode 257 without updated inode item, send root is 258, \
  parent root is 257

This requires that we deduplicate to the same file in both snapshots for
the same amount of times on each snapshot. The issue happens because a
deduplication only updates the iversion of an inode and does not update
any other field of the inode, therefore if we deduplicate the file on
each snapshot for the same amount of time, the inode will have the same
iversion value (stored as the "sequence" field on the inode item) on both
snapshots, therefore it will be seen as unchanged between in the send
snapshot while there are new/updated/deleted extent items when comparing
to the parent snapshot. This makes the send operation return -EIO and
print an error message.

Example reproducer:

  $ mkfs.btrfs -f /dev/sdb
  $ mount /dev/sdb /mnt

  # Create our first file. The first half of the file has several 64Kb
  # extents while the second half as a single 512Kb extent.
  $ xfs_io -f -s -c "pwrite -S 0xb8 -b 64K 0 512K" /mnt/foo
  $ xfs_io -c "pwrite -S 0xb8 512K 512K" /mnt/foo

  # Create the base snapshot and the parent send stream from it.
  $ btrfs subvolume snapshot -r /mnt /mnt/mysnap1
  $ btrfs send -f /tmp/1.snap /mnt/mysnap1

  # Create our second file, that has exactly the same data as the first
  # file.
  $ xfs_io -f -c "pwrite -S 0xb8 0 1M" /mnt/bar

  # Create the second snapshot, used for the incremental send, before
  # doing the file deduplication.
  $ btrfs subvolume snapshot -r /mnt /mnt/mysnap2

  # Now before creating the incremental send stream:
  #
  # 1) Deduplicate into a subrange of file foo in snapshot mysnap1. This
  #    will drop several extent items and add a new one, also updating
  #    the inode's iversion (sequence field in inode item) by 1, but not
  #    any other field of the inode;
  #
  # 2) Deduplicate into a different subrange of file foo in snapshot
  #    mysnap2. This will replace an extent item with a new one, also
  #    updating the inode's iversion by 1 but not any other field of the
  #    inode.
  #
  # After these two deduplication operations, the inode items, for file
  # foo, are identical in both snapshots, but we have different extent
  # items for this inode in both snapshots. We want to check this doesn't
  # cause send to fail with an error or produce an incorrect stream.

  $ xfs_io -r -c "dedupe /mnt/bar 0 0 512K" /mnt/mysnap1/foo
  $ xfs_io -r -c "dedupe /mnt/bar 512K 512K 512K" /mnt/mysnap2/foo

  # Create the incremental send stream.
  $ btrfs send -p /mnt/mysnap1 -f /tmp/2.snap /mnt/mysnap2
  ERROR: send ioctl failed with -5: Input/output error

This issue started happening back in 2015 when deduplication was updated
to not update the inode's ctime and mtime and update only the iversion.
Back then we would hit a BUG_ON() in send, but later in 2016 send was
updated to return -EIO and print the error message instead of doing the
BUG_ON().

A test case for fstests follows soon.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203933
Fixes: 1c919a5e13702c ("btrfs: don't update mtime/ctime on deduped inodes")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kbuild: initialize CLANG_FLAGS correctly in the top Makefile

commit 5241ab4cf42d3a93b933b55d3d53f43049081fa1 upstream.

CLANG_FLAGS is initialized by the following line:

  CLANG_FLAGS     := --target=$(notdir $(CROSS_COMPILE:%-=%))

..., which is run only when CROSS_COMPILE is set.

Some build targets (bindeb-pkg etc.) recurse to the top Makefile.

When you build the kernel with Clang but without CROSS_COMPILE,
the same compiler flags such as -no-integrated-as are accumulated
into CLANG_FLAGS.

If you run 'make CC=clang' and then 'make CC=clang bindeb-pkg',
Kbuild will recompile everything needlessly due to the build command
change.

Fix this by correctly initializing CLANG_FLAGS.

Fixes: 238bcbc4e07f ("kbuild: consolidate Clang compiler flags")
Cc: <stable@vger.kernel.org> # v5.0+
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kconfig: Clear "written" flag to avoid data loss

commit 0c5b6c28ed68becb692b43eae5e44d5aa7e160ce upstream.

Prior to this commit, starting nconfig, xconfig or gconfig, and saving
the .config file more than once caused data loss, where a .config file
that contained only comments would be written to disk starting from the
second save operation.

This bug manifests itself because the SYMBOL_WRITTEN flag is never
cleared after the first call to conf_write, and subsequent calls to
conf_write then skip all of the configuration symbols due to the
SYMBOL_WRITTEN flag being set.

This commit resolves this issue by clearing the SYMBOL_WRITTEN flag
from all symbols before conf_write returns.

Fixes: 8e2442a5f86e ("kconfig: fix missing choice values in auto.conf")
Cc: linux-stable <stable@vger.kernel.org> # 4.19+
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau: fix memory leak in nouveau_conn_reset()

[ Upstream commit 09b90e2fe35faeace2488234e2a7728f2ea8ba26 ]

In nouveau_conn_reset(), if connector->state is true,
__drm_atomic_helper_connector_destroy_state() will be called,
but the memory pointed by asyc isn't freed. Memory leak happens
in the following function __drm_atomic_helper_connector_reset(),
where newly allocated asyc->state will be assigned to connector->state.

So using nouveau_conn_atomic_destroy_state() instead of
__drm_atomic_helper_connector_destroy_state to free the "old" asyc.

Here the is the log showing memory leak.

unreferenced object 0xffff8c5480483c80 (size 192):
  comm "kworker/0:2", pid 188, jiffies 4294695279 (age 53.179s)
  hex dump (first 32 bytes):
    00 f0 ba 7b 54 8c ff ff 00 00 00 00 00 00 00 00  ...{T...........
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000005005c0d0>] kmem_cache_alloc_trace+0x195/0x2c0
    [<00000000a122baed>] nouveau_conn_reset+0x25/0xc0 [nouveau]
    [<000000004fd189a2>] nouveau_connector_create+0x3a7/0x610 [nouveau]
    [<00000000c73343a8>] nv50_display_create+0x343/0x980 [nouveau]
    [<000000002e2b03c3>] nouveau_display_create+0x51f/0x660 [nouveau]
    [<00000000c924699b>] nouveau_drm_device_init+0x182/0x7f0 [nouveau]
    [<00000000cc029436>] nouveau_drm_probe+0x20c/0x2c0 [nouveau]
    [<000000007e961c3e>] local_pci_probe+0x47/0xa0
    [<00000000da14d569>] work_for_cpu_fn+0x1a/0x30
    [<0000000028da4805>] process_one_work+0x27c/0x660
    [<000000001d415b04>] worker_thread+0x22b/0x3f0
    [<0000000003b69f1f>] kthread+0x12f/0x150
    [<00000000c94c29b7>] ret_from_fork+0x3a/0x50

Signed-off-by: Yongxin Liu <yongxin.liu@windriver.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86, boot: Remove multiple copy of static function sanitize_boot_params()

[ Upstream commit 8c5477e8046ca139bac250386c08453da37ec1ae ]

Kernel build warns:
 'sanitize_boot_params' defined but not used [-Wunused-function]

at below files:
  arch/x86/boot/compressed/cmdline.c
  arch/x86/boot/compressed/error.c
  arch/x86/boot/compressed/early_serial_console.c
  arch/x86/boot/compressed/acpi.c

That's becausethey each include misc.h which includes a definition of
sanitize_boot_params() via bootparam_utils.h.

Remove the inclusion from misc.h and have the c file including
bootparam_utils.h directly.

Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1563283092-1189-1-git-send-email-zhenzhong.duan@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/paravirt: Fix callee-saved function ELF sizes

[ Upstream commit 083db6764821996526970e42d09c1ab2f4155dd4 ]

The __raw_callee_save_*() functions have an ELF symbol size of zero,
which confuses objtool and other tools.

Fixes a bunch of warnings like the following:

  arch/x86/xen/mmu_pv.o: warning: objtool: __raw_callee_save_xen_pte_val() is missing an ELF size annotation
  arch/x86/xen/mmu_pv.o: warning: objtool: __raw_callee_save_xen_pgd_val() is missing an ELF size annotation
  arch/x86/xen/mmu_pv.o: warning: objtool: __raw_callee_save_xen_make_pte() is missing an ELF size annotation
  arch/x86/xen/mmu_pv.o: warning: objtool: __raw_callee_save_xen_make_pgd() is missing an ELF size annotation

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/afa6d49bb07497ca62e4fc3b27a2d0cece545b4e.1563413318.git.jpoimboe@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/kvm: Don't call kvm_spurious_fault() from .fixup

[ Upstream commit 3901336ed9887b075531bffaeef7742ba614058b ]

After making a change to improve objtool's sibling call detection, it
started showing the following warning:

  arch/x86/kvm/vmx/nested.o: warning: objtool: .fixup+0x15: sibling call from callable instruction with modified stack frame

The problem is the ____kvm_handle_fault_on_reboot() macro.  It does a
fake call by pushing a fake RIP and doing a jump.  That tricks the
unwinder into printing the function which triggered the exception,
rather than the .fixup code.

Instead of the hack to make it look like the original function made the
call, just change the macro so that the original function actually does
make the call.  This allows removal of the hack, and also makes objtool
happy.

I triggered a vmx instruction exception and verified that the stack
trace is still sane:

  kernel BUG at arch/x86/kvm/x86.c:358!
  invalid opcode: 0000 [#1] SMP PTI
  CPU: 28 PID: 4096 Comm: qemu-kvm Not tainted 5.2.0+ #16
  Hardware name: Lenovo THINKSYSTEM SD530 -[7X2106Z000]-/-[7X2106Z000]-, BIOS -[TEE113Z-1.00]- 07/17/2017
  RIP: 0010:kvm_spurious_fault+0x5/0x10
  Code: 00 00 00 00 00 8b 44 24 10 89 d2 45 89 c9 48 89 44 24 10 8b 44 24 08 48 89 44 24 08 e9 d4 40 22 00 0f 1f 40 00 0f 1f 44 00 00 <0f> 0b 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 55 49 89 fd 41
  RSP: 0018:ffffbf91c683bd00 EFLAGS: 00010246
  RAX: 000061f040000000 RBX: ffff9e159c77bba0 RCX: ffff9e15a5c87000
  RDX: 0000000665c87000 RSI: ffff9e15a5c87000 RDI: ffff9e159c77bba0
  RBP: 0000000000000000 R08: 0000000000000000 R09: ffff9e15a5c87000
  R10: 0000000000000000 R11: fffff8f2d99721c0 R12: ffff9e159c77bba0
  R13: ffffbf91c671d960 R14: ffff9e159c778000 R15: 0000000000000000
  FS:  00007fa341cbe700(0000) GS:ffff9e15b7400000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007fdd38356804 CR3: 00000006759de003 CR4: 00000000007606e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  PKRU: 55555554
  Call Trace:
   loaded_vmcs_init+0x4f/0xe0
   alloc_loaded_vmcs+0x38/0xd0
   vmx_create_vcpu+0xf7/0x600
   kvm_vm_ioctl+0x5e9/0x980
   ? __switch_to_asm+0x40/0x70
   ? __switch_to_asm+0x34/0x70
   ? __switch_to_asm+0x40/0x70
   ? __switch_to_asm+0x34/0x70
   ? free_one_page+0x13f/0x4e0
   do_vfs_ioctl+0xa4/0x630
   ksys_ioctl+0x60/0x90
   __x64_sys_ioctl+0x16/0x20
   do_syscall_64+0x55/0x1c0
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7fa349b1ee5b

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/64a9b64d127e87b6920a97afde8e96ea76f6524e.1563413318.git.jpoimboe@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen/pv: Fix a boot up hang revealed by int3 self test

[ Upstream commit b23e5844dfe78a80ba672793187d3f52e4b528d7 ]

Commit 7457c0da024b ("x86/alternatives: Add int3_emulate_call()
selftest") is used to ensure there is a gap setup in int3 exception stack
which could be used for inserting call return address.

This gap is missed in XEN PV int3 exception entry path, then below panic
triggered:

[    0.772876] general protection fault: 0000 [#1] SMP NOPTI
[    0.772886] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.2.0+ #11
[    0.772893] RIP: e030:int3_magic+0x0/0x7
[    0.772905] RSP: 3507:ffffffff82203e98 EFLAGS: 00000246
[    0.773334] Call Trace:
[    0.773334]  alternative_instructions+0x3d/0x12e
[    0.773334]  check_bugs+0x7c9/0x887
[    0.773334]  ? __get_locked_pte+0x178/0x1f0
[    0.773334]  start_kernel+0x4ff/0x535
[    0.773334]  ? set_init_arg+0x55/0x55
[    0.773334]  xen_start_kernel+0x571/0x57a

For 64bit PV guests, Xen's ABI enters the kernel with using SYSRET, with
%rcx/%r11 on the stack. To convert back to "normal" looking exceptions,
the xen thunks do 'xen_*: pop %rcx; pop %r11; jmp *'.

E.g. Extracting 'xen_pv_trap xenint3' we have:
xen_xenint3:
 pop %rcx;
 pop %r11;
 jmp xenint3

As xenint3 and int3 entry code are same except xenint3 doesn't generate
a gap, we can fix it by using int3 and drop useless xenint3.

Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mlxsw: spectrum_dcb: Configure DSCP map as the last rule is removed

[ Upstream commit dedfde2fe1c4ccf27179fcb234e2112d065c39bb ]

Spectrum systems use DSCP rewrite map to update DSCP field in egressing
packets to correspond to priority that the packet has. Whether rewriting
will take place is determined at the point when the packet ingresses the
switch: if the port is in Trust L3 mode, packet priority is determined from
the DSCP map at the port, and DSCP rewrite will happen. If the port is in
Trust L2 mode, 802.1p is used for packet prioritization, and no DSCP
rewrite will happen.

The driver determines the port trust mode based on whether any DSCP
prioritization rules are in effect at given port. If there are any, trust
level is L3, otherwise it's L2. When the last DSCP rule is removed, the
port is switched to trust L2. Under that scenario, if DSCP of a packet
should be rewritten, it should be rewritten to 0.

However, when switching to Trust L2, the driver neglects to also update the
DSCP rewrite map. The last DSCP rule thus remains in effect, and packets
egressing through this port, if they have the right priority, will have
their DSCP set according to this rule.

Fix by first configuring the rewrite map, and only then switching to trust
L2 and bailing out.

Fixes: b2b1dab6884e ("mlxsw: spectrum: Support ieee_setapp, ieee_delapp")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reported-by: Alex Veber <alexve@mellanox.com>
Tested-by: Alex Veber <alexve@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipc/mqueue.c: only perform resource calculation if user valid

[ Upstream commit a318f12ed8843cfac53198390c74a565c632f417 ]

Andreas Christoforou reported:

  UBSAN: Undefined behaviour in ipc/mqueue.c:414:49 signed integer overflow:
  9 * 2305843009213693951 cannot be represented in type 'long int'
  ...
  Call Trace:
    mqueue_evict_inode+0x8e7/0xa10 ipc/mqueue.c:414
    evict+0x472/0x8c0 fs/inode.c:558
    iput_final fs/inode.c:1547 [inline]
    iput+0x51d/0x8c0 fs/inode.c:1573
    mqueue_get_inode+0x8eb/0x1070 ipc/mqueue.c:320
    mqueue_create_attr+0x198/0x440 ipc/mqueue.c:459
    vfs_mkobj+0x39e/0x580 fs/namei.c:2892
    prepare_open ipc/mqueue.c:731 [inline]
    do_mq_open+0x6da/0x8e0 ipc/mqueue.c:771

Which could be triggered by:

        struct mq_attr attr = {
                .mq_flags = 0,
                .mq_maxmsg = 9,
                .mq_msgsize = 0x1fffffffffffffff,
                .mq_curmsgs = 0,
        };

        if (mq_open("/testing", 0x40, 3, &attr) == (mqd_t) -1)
                perror("mq_open");

mqueue_get_inode() was correctly rejecting the giant mq_msgsize, and
preparing to return -EINVAL.  During the cleanup, it calls
mqueue_evict_inode() which performed resource usage tracking math for
updating "user", before checking if there was a valid "user" at all
(which would indicate that the calculations would be sane).  Instead,
delay this check to after seeing a valid "user".

The overflow was real, but the results went unused, so while the flaw is
harmless, it's noisy for kernel fuzzers, so just fix it by moving the
calculation under the non-NULL "user" where it actually gets used.

Link: http://lkml.kernel.org/r/201906072207.ECB65450@keescook
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Andreas Christoforou <andreaschristofo@gmail.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers/rapidio/devices/rio_mport_cdev.c: NUL terminate some strings

[ Upstream commit 156e0b1a8112b76e351684ac948c59757037ac36 ]

The dev_info.name[] array has space for RIO_MAX_DEVNAME_SZ + 1
characters.  But the problem here is that we don't ensure that the user
put a NUL terminator on the end of the string.  It could lead to an out
of bounds read.

Link: http://lkml.kernel.org/r/20190529110601.GB19119@mwanda
Fixes: e8de370188d0 ("rapidio: add mport char device driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

uapi linux/coda_psdev.h: move upc_req definition from uapi to kernel side headers

[ Upstream commit f90fb3c7e2c13ae829db2274b88b845a75038b8a ]

Only users of upc_req in kernel side fs/coda/psdev.c and
fs/coda/upcall.c already include linux/coda_psdev.h.

Suggested by Jan Harkes <jaharkes@cs.cmu.edu> in
  https://lore.kernel.org/lkml/20150531111913.GA23377@cs.cmu.edu/

Fixes these include/uapi/linux/coda_psdev.h compilation errors in userspace:

  linux/coda_psdev.h:12:19: error: field `uc_chain' has incomplete type
  struct list_head    uc_chain;
                   ^
  linux/coda_psdev.h:13:2: error: unknown type name `caddr_t'
  caddr_t             uc_data;
  ^
  linux/coda_psdev.h:14:2: error: unknown type name `u_short'
  u_short             uc_flags;
  ^
  linux/coda_psdev.h:15:2: error: unknown type name `u_short'
  u_short             uc_inSize;  /* Size is at most 5000 bytes */
  ^
  linux/coda_psdev.h:16:2: error: unknown type name `u_short'
  u_short             uc_outSize;
  ^
  linux/coda_psdev.h:17:2: error: unknown type name `u_short'
  u_short             uc_opcode;  /* copied from data to save lookup */
  ^
  linux/coda_psdev.h:19:2: error: unknown type name `wait_queue_head_t'
  wait_queue_head_t   uc_sleep;   /* process' wait queue */
  ^

Link: http://lkml.kernel.org/r/9f99f5ce6a0563d5266e6cf7aa9585aac2cae971.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

coda: fix build using bare-metal toolchain

[ Upstream commit b2a57e334086602be56b74958d9f29b955cd157f ]

The kernel is self-contained project and can be built with bare-metal
toolchain.  But bare-metal toolchain doesn't define __linux__.  Because
of this u_quad_t type is not defined when using bare-metal toolchain and
codafs build fails.  This patch fixes it by defining u_quad_t type
unconditionally.

Link: http://lkml.kernel.org/r/3cbb40b0a57b6f9923a9d67b53473c0b691a3eaa.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

coda: add error handling for fget

[ Upstream commit 02551c23bcd85f0c68a8259c7b953d49d44f86af ]

When fget fails, the lack of error-handling code may cause unexpected
results.

This patch adds error-handling code after calling fget.

Link: http://lkml.kernel.org/r/2514ec03df9c33b86e56748513267a80dd8004d9.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lib/test_string.c: avoid masking memset16/32/64 failures

[ Upstream commit 33d6e0ff68af74be0c846c8e042e84a9a1a0561e ]

If a memsetXX implementation is completely broken and fails in the first
iteration, when i, j, and k are all zero, the failure is masked as zero
is returned.  Failing in the first iteration is perhaps the most likely
failure, so this makes the tests pretty much useless.  Avoid the
situation by always setting a random unused bit in the result on
failure.

Link: http://lkml.kernel.org/r/20190506124634.6807-3-peda@axentia.se
Fixes: 03270c13c5ff ("lib/string.c: add testcases for memset16/32/64")
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lib/test_overflow.c: avoid tainting the kernel and fix wrap size

[ Upstream commit 8e060c21ae2c265a2b596e9e7f9f97ec274151a4 ]

This adds __GFP_NOWARN to the kmalloc()-portions of the overflow test to
avoid tainting the kernel.  Additionally fixes up the math on wrap size
to be architecture and page size agnostic.

Link: http://lkml.kernel.org/r/201905282012.0A8767E24@keescook
Fixes: ca90800a91ba ("test_overflow: Add memory allocation overflow tests")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm/cma.c: fail if fixed declaration can't be honored

[ Upstream commit c633324e311243586675e732249339685e5d6faa ]

The description of cma_declare_contiguous() indicates that if the
'fixed' argument is true the reserved contiguous area must be exactly at
the address of the 'base' argument.

However, the function currently allows the 'base', 'size', and 'limit'
arguments to be silently adjusted to meet alignment constraints.  This
commit enforces the documented behavior through explicit checks that
return an error if the region does not fit within a specified region.

Link: http://lkml.kernel.org/r/1561422051-16142-1-git-send-email-opendmb@gmail.com
Fixes: 5ea3b1b2f8ad ("cma: add placement specifier for "cma=" kernel parameter")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Yue Hu <huyue2@yulong.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86: math-emu: Hide clang warnings for 16-bit overflow

[ Upstream commit 29e7e9664aec17b94a9c8c5a75f8d216a206aa3a ]

clang warns about a few parts of the math-emu implementation
where a 16-bit integer becomes negative during assignment:

arch/x86/math-emu/poly_tan.c:88:35: error: implicit conversion from 'int' to 'short' changes value from 49216 to -16320 [-Werror,-Wconstant-conversion]
                                      (0x41 + EXTENDED_Ebias) | SIGN_Negative);
                                      ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~
arch/x86/math-emu/fpu_emu.h:180:58: note: expanded from macro 'setexponent16'
 #define setexponent16(x,y)  { (*(short *)&((x)->exp)) = (y); }
                                                      ~  ^
arch/x86/math-emu/reg_constant.c:37:32: error: implicit conversion from 'int' to 'short' changes value from 49085 to -16451 [-Werror,-Wconstant-conversion]
FPU_REG const CONST_PI2extra = MAKE_REG(NEG, -66,
                               ^~~~~~~~~~~~~~~~~~
arch/x86/math-emu/reg_constant.c:21:25: note: expanded from macro 'MAKE_REG'
                ((EXTENDED_Ebias+(e)) | ((SIGN_##s != 0)*0x8000)) }
                 ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
arch/x86/math-emu/reg_constant.c:48:28: error: implicit conversion from 'int' to 'short' changes value from 65535 to -1 [-Werror,-Wconstant-conversion]
FPU_REG const CONST_QNaN = MAKE_REG(NEG, EXP_OVER, 0x00000000, 0xC0000000);
                           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/x86/math-emu/reg_constant.c:21:25: note: expanded from macro 'MAKE_REG'
                ((EXTENDED_Ebias+(e)) | ((SIGN_##s != 0)*0x8000)) }
                 ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~

The code is correct as is, so add a typecast to shut up the warnings.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190712090816.350668-1-arnd@arndb.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/apic: Silence -Wtype-limits compiler warnings

[ Upstream commit ec6335586953b0df32f83ef696002063090c7aef ]

There are many compiler warnings like this,

In file included from ./arch/x86/include/asm/smp.h:13,
                 from ./arch/x86/include/asm/mmzone_64.h:11,
                 from ./arch/x86/include/asm/mmzone.h:5,
                 from ./include/linux/mmzone.h:969,
                 from ./include/linux/gfp.h:6,
                 from ./include/linux/mm.h:10,
                 from arch/x86/kernel/apic/io_apic.c:34:
arch/x86/kernel/apic/io_apic.c: In function 'check_timer':
./arch/x86/include/asm/apic.h:37:11: warning: comparison of unsigned
expression >= 0 is always true [-Wtype-limits]
   if ((v) <= apic_verbosity) \
           ^~
arch/x86/kernel/apic/io_apic.c:2160:2: note: in expansion of macro
'apic_printk'
  apic_printk(APIC_QUIET, KERN_INFO "..TIMER: vector=0x%02X "
  ^~~~~~~~~~~
./arch/x86/include/asm/apic.h:37:11: warning: comparison of unsigned
expression >= 0 is always true [-Wtype-limits]
   if ((v) <= apic_verbosity) \
           ^~
arch/x86/kernel/apic/io_apic.c:2207:4: note: in expansion of macro
'apic_printk'
    apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: "
    ^~~~~~~~~~~

APIC_QUIET is 0, so silence them by making apic_verbosity type int.

Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1562621805-24789-1-git-send-email-cai@lca.pw
Signed-off-by: Sasha Levin <sashal@kernel.org>

be2net: Signal that the device cannot transmit during reconfiguration

[ Upstream commit 7429c6c0d9cb086d8e79f0d2a48ae14851d2115e ]

While changing the number of interrupt channels, be2net stops adapter
operation (including netif_tx_disable()) but it doesn't signal that it
cannot transmit. This may lead dev_watchdog() to falsely trigger during
that time.

Add the missing call to netif_carrier_off(), following the pattern used in
many other drivers. netif_carrier_on() is already taken care of in
be_open().

Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: fix false-positive -Wuninitialized warning

[ Upstream commit dfd6f9ad36368b8dbd5f5a2b2f0a4705ae69a323 ]

clang gets confused by an uninitialized variable in what looks
to it like a never executed code path:

arch/x86/kernel/acpi/boot.c:618:13: error: variable 'polarity' is uninitialized when used here [-Werror,-Wuninitialized]
        polarity = polarity ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH;
                   ^~~~~~~~
arch/x86/kernel/acpi/boot.c:606:32: note: initialize the variable 'polarity' to silence this warning
        int rc, irq, trigger, polarity;
                                      ^
                                       = 0
arch/x86/kernel/acpi/boot.c:617:12: error: variable 'trigger' is uninitialized when used here [-Werror,-Wuninitialized]
        trigger = trigger ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE;
                  ^~~~~~~
arch/x86/kernel/acpi/boot.c:606:22: note: initialize the variable 'trigger' to silence this warning
        int rc, irq, trigger, polarity;
                            ^
                             = 0

This is unfortunately a design decision in clang and won't be fixed.

Changing the acpi_get_override_irq() macro to an inline function
reliably avoids the issue.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86: kvm: avoid constant-conversion warning

[ Upstream commit a6a6d3b1f867d34ba5bd61aa7bb056b48ca67cff ]

clang finds a contruct suspicious that converts an unsigned
character to a signed integer and back, causing an overflow:

arch/x86/kvm/mmu.c:4605:39: error: implicit conversion from 'int' to 'u8' (aka 'unsigned char') changes value from -205 to 51 [-Werror,-Wconstant-conversion]
                u8 wf = (pfec & PFERR_WRITE_MASK) ? ~w : 0;
                   ~~                               ^~
arch/x86/kvm/mmu.c:4607:38: error: implicit conversion from 'int' to 'u8' (aka 'unsigned char') changes value from -241 to 15 [-Werror,-Wconstant-conversion]
                u8 uf = (pfec & PFERR_USER_MASK) ? ~u : 0;
                   ~~                              ^~
arch/x86/kvm/mmu.c:4609:39: error: implicit conversion from 'int' to 'u8' (aka 'unsigned char') changes value from -171 to 85 [-Werror,-Wconstant-conversion]
                u8 ff = (pfec & PFERR_FETCH_MASK) ? ~x : 0;
                   ~~                               ^~

Add an explicit cast to tell clang that everything works as
intended here.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://github.com/ClangBuiltLinux/linux/issues/95
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>