Ilpo Järvinen [Wed, 15 Feb 2023 13:06:00 +0000 (15:06 +0200)]
selftests/resctrl: Check for return value after write_schemata()
[ Upstream commit
0d45c83b95da414e98ad333e723141a94f6e2c64 ]
MBA test case writes schemata but it does not check if the write is
successful or not.
Add the error check and return error properly.
Fixes:
01fee6b4d1f9 ("selftests/resctrl: Add MBA test")
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ilpo Järvinen [Wed, 15 Feb 2023 13:05:59 +0000 (15:05 +0200)]
selftests/resctrl: Allow ->setup() to return errors
[ Upstream commit
fa10366cc6f4cc862871f8938426d85c2481f084 ]
resctrl_val() assumes ->setup() always returns either 0 to continue
tests or < 0 in case of the normal termination of tests after x runs.
The latter overlaps with normal error returns.
Define END_OF_TESTS (=1) to differentiate the normal termination of
tests and return errors as negative values. Alter callers of ->setup()
to handle errors properly.
Fixes:
790bf585b0ee ("selftests/resctrl: Add Cache Allocation Technology (CAT) selftest")
Fixes:
ecdbb911f22d ("selftests/resctrl: Add MBM test")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ilpo Järvinen [Wed, 15 Feb 2023 13:05:58 +0000 (15:05 +0200)]
selftests/resctrl: Move ->setup() call outside of test specific branches
[ Upstream commit
c90b3b588e369c20087699316259fa5ebbb16f2d ]
resctrl_val() function is called only by MBM, MBA, and CMT tests which
means the else branch is never used.
Both test branches call param->setup().
Remove the unused else branch and place the ->setup() call outside of
the test specific branches reducing code duplication.
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Stable-dep-of:
fa10366cc6f4 ("selftests/resctrl: Allow ->setup() to return errors")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ilpo Järvinen [Wed, 15 Feb 2023 13:05:57 +0000 (15:05 +0200)]
selftests/resctrl: Return NULL if malloc_and_init_memory() did not alloc mem
[ Upstream commit
22a8be280383812235131dda18a8212a59fadd2d ]
malloc_and_init_memory() in fill_buf isn't checking if memalign()
successfully allocated memory or not before accessing the memory.
Check the return value of memalign() and return NULL if allocating
aligned memory fails.
Fixes:
a2561b12fe39 ("selftests/resctrl: Add built in benchmark")
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zqiang [Tue, 20 Dec 2022 14:16:25 +0000 (22:16 +0800)]
rcu: Fix missing TICK_DEP_MASK_RCU_EXP dependency check
[ Upstream commit
db7b464df9d820186e98a65aa6a10f0d51fbf8ce ]
This commit adds checks for the TICK_DEP_MASK_RCU_EXP bit, thus enabling
RCU expedited grace periods to actually force-enable scheduling-clock
interrupts on holdout CPUs.
Fixes:
df1e849ae455 ("rcu: Enable tick for nohz_full CPUs slow to provide expedited QS")
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Anna-Maria Behnsen <anna-maria@linutronix.de>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rae Moar [Wed, 8 Mar 2023 20:39:51 +0000 (20:39 +0000)]
kunit: fix bug in the order of lines in debugfs logs
[ Upstream commit
f9a301c3317daa921375da0aec82462ddf019928 ]
Fix bug in debugfs logs that causes an incorrect order of lines in the
debugfs log.
Currently, the test counts lines that show the number of tests passed,
failed, and skipped, as well as any suite diagnostic lines,
appear prior to the individual results, which is a bug.
Ensure the order of printing for the debugfs log is correct. Additionally,
add a KTAP header to so the debugfs logs can be valid KTAP.
This is an example of a log prior to these fixes:
KTAP version 1
# Subtest: kunit_status
1..2
# kunit_status: pass:2 fail:0 skip:0 total:2
# Totals: pass:2 fail:0 skip:0 total:2
ok 1 kunit_status_set_failure_test
ok 2 kunit_status_mark_skipped_test
ok 1 kunit_status
Note the two lines with stats are out of order. This is the same debugfs
log after the fixes (in combination with the third patch to remove the
extra line):
KTAP version 1
1..1
KTAP version 1
# Subtest: kunit_status
1..2
ok 1 kunit_status_set_failure_test
ok 2 kunit_status_mark_skipped_test
# kunit_status: pass:2 fail:0 skip:0 total:2
# Totals: pass:2 fail:0 skip:0 total:2
ok 1 kunit_status
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rae Moar [Wed, 23 Nov 2022 18:25:58 +0000 (18:25 +0000)]
kunit: improve KTAP compliance of KUnit test output
[ Upstream commit
6c738b52316c58ae8a87abf0907f87a7b5e7a109 ]
Change KUnit test output to better comply with KTAP v1 specifications
found here: https://kernel.org/doc/html/latest/dev-tools/ktap.html.
1) Use "KTAP version 1" instead of "TAP version 14" as test output header
2) Remove '-' between test number and test name on test result lines
2) Add KTAP version lines to each subtest header as well
Note that the new KUnit output still includes the “# Subtest” line now
located after the KTAP version line. This does not completely match the
KTAP v1 spec but since it is classified as a diagnostic line, it is not
expected to be disruptive or break any existing parsers. This
“# Subtest” line comes from the TAP 14 spec
(https://testanything.org/tap-version-14-specification.html) and it is
used to define the test name before the results.
Original output:
TAP version 14
1..1
# Subtest: kunit-test-suite
1..3
ok 1 - kunit_test_1
ok 2 - kunit_test_2
ok 3 - kunit_test_3
# kunit-test-suite: pass:3 fail:0 skip:0 total:3
# Totals: pass:3 fail:0 skip:0 total:3
ok 1 - kunit-test-suite
New output:
KTAP version 1
1..1
KTAP version 1
# Subtest: kunit-test-suite
1..3
ok 1 kunit_test_1
ok 2 kunit_test_2
ok 3 kunit_test_3
# kunit-test-suite: pass:3 fail:0 skip:0 total:3
# Totals: pass:3 fail:0 skip:0 total:3
ok 1 kunit-test-suite
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Stable-dep-of:
f9a301c3317d ("kunit: fix bug in the order of lines in debugfs logs")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Krzysztof Kozlowski [Thu, 30 Mar 2023 07:13:33 +0000 (09:13 +0200)]
ASoC: dt-bindings: qcom,lpass-rx-macro: correct minItems for clocks
commit
59257015ac8813d2430988aa01c2f4609a60e8e7 upstream.
The RX macro codec comes on some platforms in two variants - ADSP
and ADSP bypassed - thus the clock-names varies from 3 to 5. The clocks
must vary as well:
sc7280-idp.dtb: codec@3200000: clocks: [[202, 8], [202, 7], [203]] is too short
Fixes:
852fda58d99a ("ASoC: qcom: dt-bindings: Update bindings for clocks in lpass digital codes")
Cc: <stable@vger.kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230330071333.24308-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jeffrey Hugo [Fri, 24 Mar 2023 16:13:04 +0000 (10:13 -0600)]
bus: mhi: host: Range check CHDBOFF and ERDBOFF
commit
6a0c637bfee69a74c104468544d9f2a6579626d0 upstream.
If the value read from the CHDBOFF and ERDBOFF registers is outside the
range of the MHI register space then an invalid address might be computed
which later causes a kernel panic. Range check the read value to prevent
a crash due to bad data from the device.
Fixes:
6cd330ae76ff ("bus: mhi: core: Add support for ringing channel/event ring doorbells")
Cc: stable@vger.kernel.org
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/1679674384-27209-1-git-send-email-quic_jhugo@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jeffrey Hugo [Mon, 10 Apr 2023 15:58:12 +0000 (09:58 -0600)]
bus: mhi: host: Use mhi_tryset_pm_state() for setting fw error state
commit
1d1493bdc25f498468a606a4ece947d155cfa3a9 upstream.
If firmware loading fails, the controller's pm_state is updated to
MHI_PM_FW_DL_ERR unconditionally. This can corrupt the pm_state as the
update is not done under the proper lock, and also does not validate
the state transition. The firmware loading can fail due to a detected
syserr, but if MHI_PM_FW_DL_ERR is unconditionally set as the pm_state,
the handling of the syserr can break when it attempts to transition from
syserr detect, to syserr process.
By grabbing the lock, we ensure we don't race with some other pm_state
update. By using mhi_try_set_pm_state(), we check that the transition
to MHI_PM_FW_DL_ERR is valid via the state machine logic. If it is not
valid, then some other transition is occurring like syserr processing, and
we assume that will resolve the firmware loading error.
Fixes:
12e050c77be0 ("bus: mhi: core: Move to an error state on any firmware load failure")
Cc: stable@vger.kernel.org
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/1681142292-27571-3-git-send-email-quic_jhugo@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jeffrey Hugo [Mon, 10 Apr 2023 15:58:11 +0000 (09:58 -0600)]
bus: mhi: host: Remove duplicate ee check for syserr
commit
d469d9448a0f1a33c175d3280b1542fa0158ad7a upstream.
If we detect a system error via intvec, we only process the syserr if the
current ee is different than the last observed ee. The reason for this
check is to prevent bhie from running multiple times, but with the single
queue handling syserr, that is not possible.
The check can cause an issue with device recovery. If PBL loads a bad SBL
via BHI, but that SBL hangs before notifying the host of an ee change,
then issuing soc_reset to crash the device and retry (after supplying a
fixed SBL) will not recover the device as the host will observe a PBL->PBL
transition and not process the syserr. The device will be stuck until
either the driver is reloaded, or the host is rebooted. Instead, remove
the check so that we can attempt to recover the device.
Fixes:
ef2126c4e2ea ("bus: mhi: core: Process execution environment changes serially")
Cc: stable@vger.kernel.org
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/1681142292-27571-2-git-send-email-quic_jhugo@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Williams [Fri, 14 Apr 2023 18:53:55 +0000 (11:53 -0700)]
cxl/hdm: Fail upon detecting 0-sized decoders
commit
7701c8bef4f14bd9f7940c6ed0e6a73584115a96 upstream.
Decoders committed with 0-size lead to later crashes on shutdown as
__cxl_dpa_release() assumes a 'struct resource' has been established in
the in 'cxlds->dpa_res'. Just fail the driver load in this instance
since there are deeper problems with the enumeration or the setup when
this happens.
Fixes:
9c57cde0dcbd ("cxl/hdm: Enumerate allocated DPA")
Cc: <stable@vger.kernel.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/168149843516.792294.11872242648319572632.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Chinner [Wed, 12 Apr 2023 05:48:50 +0000 (15:48 +1000)]
xfs: don't consider future format versions valid
commit
aa88019851a85df80cb77f143758b13aee09e3d9 upstream.
In commit
fe08cc504448 we reworked the valid superblock version
checks. If it is a V5 filesystem, it is always valid, then we
checked if the version was less than V4 (reject) and then checked
feature fields in the V4 flags to determine if it was valid.
What we missed was that if the version is not V4 at this point,
we shoudl reject the fs. i.e. the check current treats V6+
filesystems as if it was a v4 filesystem. Fix this.
cc: stable@vger.kernel.org
Fixes:
fe08cc504448 ("xfs: open code sb verifier feature checks")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xiubo Li [Wed, 19 Apr 2023 02:39:14 +0000 (10:39 +0800)]
ceph: fix potential use-after-free bug when trimming caps
commit
aaf67de78807c59c35bafb5003d4fb457c764800 upstream.
When trimming the caps and just after the 'session->s_cap_lock' is
released in ceph_iterate_session_caps() the cap maybe removed by
another thread, and when using the stale cap memory in the callbacks
it will trigger use-after-free crash.
We need to check the existence of the cap just after the 'ci->i_ceph_lock'
being acquired. And do nothing if it's already removed.
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/43272
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Luís Henriques <lhenriques@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mårten Lindahl [Thu, 30 Mar 2023 14:40:59 +0000 (16:40 +0200)]
ubifs: Fix memory leak in do_rename
commit
3a36d20e012903f45714df2731261fdefac900cb upstream.
If renaming a file in an encrypted directory, function
fscrypt_setup_filename allocates memory for a file name. This name is
never used, and before returning to the caller the memory for it is not
freed.
When running kmemleak on it we see that it is registered as a leak. The
report below is triggered by a simple program 'rename' that renames a
file in an encrypted directory:
unreferenced object 0xffff888101502840 (size 32):
comm "rename", pid 9404, jiffies
4302582475 (age 435.735s)
backtrace:
__kmem_cache_alloc_node
__kmalloc
fscrypt_setup_filename
do_rename
ubifs_rename
vfs_rename
do_renameat2
To fix this we can remove the call to fscrypt_setup_filename as it's not
needed.
Fixes:
278d9a243635f26 ("ubifs: Rename whiteout atomically")
Reported-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mårten Lindahl [Thu, 30 Mar 2023 09:32:14 +0000 (11:32 +0200)]
ubifs: Free memory for tmpfile name
commit
1fb815b38bb31d6af9bd0540b8652a0d6fe6cfd3 upstream.
When opening a ubifs tmpfile on an encrypted directory, function
fscrypt_setup_filename allocates memory for the name that is to be
stored in the directory entry, but after the name has been copied to the
directory entry inode, the memory is not freed.
When running kmemleak on it we see that it is registered as a leak. The
report below is triggered by a simple program 'tmpfile' just opening a
tmpfile:
unreferenced object 0xffff88810178f380 (size 32):
comm "tmpfile", pid 509, jiffies
4294934744 (age 1524.742s)
backtrace:
__kmem_cache_alloc_node
__kmalloc
fscrypt_setup_filename
ubifs_tmpfile
vfs_tmpfile
path_openat
Free this memory after it has been copied to the inode.
Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wang YanQing [Tue, 28 Mar 2023 15:35:34 +0000 (23:35 +0800)]
ubi: Fix return value overwrite issue in try_write_vid_and_data()
commit
31a149d5c13c4cbcf97de3435817263a2d8c9d6e upstream.
The commit
2d78aee426d8 ("UBI: simplify LEB write and atomic LEB change code")
adds helper function, try_write_vid_and_data(), to simplify the code, but this
helper function has bug, it will return 0 (success) when ubi_io_write_vid_hdr()
or the ubi_io_write_data() return error number (-EIO, etc), because the return
value of ubi_wl_put_peb() will overwrite the original return value.
This issue will cause unexpected data loss issue, because the caller of this
function and UBIFS willn't know the data is lost.
Fixes:
2d78aee426d8 ("UBI: simplify LEB write and atomic LEB change code")
Cc: stable@vger.kernel.org
Signed-off-by: Wang YanQing <udknight@gmail.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhihao Cheng [Wed, 1 Mar 2023 12:29:19 +0000 (20:29 +0800)]
ubifs: Fix memleak when insert_old_idx() failed
commit
b5fda08ef213352ac2df7447611eb4d383cce929 upstream.
Following process will cause a memleak for copied up znode:
dirty_cow_znode
zn = copy_znode(c, znode);
err = insert_old_idx(c, zbr->lnum, zbr->offs);
if (unlikely(err))
return ERR_PTR(err); // No one refers to zn.
Fetch a reproducer in [Link].
Function copy_znode() is split into 2 parts: resource allocation
and znode replacement, insert_old_idx() is split in similar way,
so resource cleanup could be done in error handling path without
corrupting metadata(mem & disk).
It's okay that old index inserting is put behind of add_idx_dirt(),
old index is used in layout_leb_in_gaps(), so the two processes do
not depend on each other.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216705
Fixes:
1e51764a3c2a ("UBIFS: add new flash file system")
Cc: stable@vger.kernel.org
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhihao Cheng [Wed, 1 Mar 2023 12:29:18 +0000 (20:29 +0800)]
Revert "ubifs: dirty_cow_znode: Fix memleak in error handling path"
commit
7d01cb27f6aebc54efbe28d8961a973b8f795b13 upstream.
This reverts commit
122deabfe1428 (ubifs: dirty_cow_znode: Fix memleak
in error handling path).
After commit
122deabfe1428 applied, if insert_old_idx() failed, old
index neither exists in TNC nor in old-index tree. Which means that
old index node could be overwritten in layout_leb_in_gaps(), then
ubifs image will be corrupted in power-cut.
Fixes:
122deabfe1428 (ubifs: dirty_cow_znode: Fix memleak ... path)
Cc: stable@vger.kernel.org
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrew Jones [Thu, 27 Apr 2023 16:36:26 +0000 (18:36 +0200)]
RISC-V: Align SBI probe implementation with spec
commit
41cad8284d5e6bf1d49d3c10a6b52ee1ae866a20 upstream.
sbi_probe_extension() is specified with "Returns 0 if the given SBI
extension ID (EID) is not available, or 1 if it is available unless
defined as any other non-zero value by the implementation."
Additionally, sbiret.value is a long. Fix the implementation to
ensure any nonzero long value is considered a success, rather
than only positive int values.
Fixes:
b9dcd9e41587 ("RISC-V: Add basic support for SBI v0.2")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230427163626.101042-1-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kishon Vijay Abraham I [Wed, 5 Apr 2023 13:03:17 +0000 (13:03 +0000)]
iommu/amd: Fix "Guest Virtual APIC Table Root Pointer" configuration in IRTE
commit
ccc62b827775915a9b82db42a29813d04f92df7a upstream.
commit
b9c6ff94e43a ("iommu/amd: Re-factor guest virtual APIC
(de-)activation code") while refactoring guest virtual APIC
activation/de-activation code, stored information for activate/de-activate
in "struct amd_ir_data". It used 32-bit integer data type for storing the
"Guest Virtual APIC Table Root Pointer" (ga_root_ptr), though the
"ga_root_ptr" is actually a 40-bit field in IRTE (Interrupt Remapping
Table Entry).
This causes interrupts from PCIe devices to not reach the guest in the case
of PCIe passthrough with SME (Secure Memory Encryption) enabled as _SME_
bit in the "ga_root_ptr" is lost before writing it to the IRTE.
Fix it by using 64-bit data type for storing the "ga_root_ptr". While at
that also change the data type of "ga_tag" to u32 in order to match
the IOMMU spec.
Fixes:
b9c6ff94e43a ("iommu/amd: Re-factor guest virtual APIC (de-)activation code")
Cc: stable@vger.kernel.org # v5.4+
Reported-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Link: https://lore.kernel.org/r/20230405130317.9351-1-kvijayab@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tim Huang [Wed, 22 Mar 2023 06:39:16 +0000 (14:39 +0800)]
drm/amd/pm: re-enable the gfx imu when smu resume
commit
f7f28f268b861c29dd18086bb636abedf0ff59ff upstream.
If the gfx imu is poweroff when suspend, then
it need to be re-enabled when resume.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yu Songping [Thu, 24 Nov 2022 01:52:37 +0000 (09:52 +0800)]
swsmu/amdgpu_smu: Fix the wrong if-condition
commit
484d7dcc709da46a5976c9530eeff931e9ecba82 upstream.
The logical operator '&&' will make
smu->ppt_funcs->set_gfx_power_up_by_imu segment fault when
smu->ppt_funcs is NULL.
Signed-off-by: Yu Songping <yusongping@huawei.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ondrej Mosnacek [Wed, 3 May 2023 14:01:14 +0000 (16:01 +0200)]
tracing: Fix permissions for the buffer_percent file
commit
4f94559f40ad06d627c0fdfc3319cec778a2845b upstream.
This file defines both read and write operations, yet it is being
created as read-only. This means that it can't be written to without the
CAP_DAC_OVERRIDE capability. Fix the permissions to allow root to write
to it without the need to override DAC perms.
Link: https://lore.kernel.org/linux-trace-kernel/20230503140114.3280002-1-omosnace@redhat.com
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes:
03329f993978 ("tracing: Add tracefs file buffer_percentage")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Song Shuai [Wed, 26 Apr 2023 10:00:09 +0000 (18:00 +0800)]
riscv: mm: remove redundant parameter of create_fdt_early_page_table
commit
e4ef93edd4e0b022529303db1915766ff9de450e upstream.
create_fdt_early_page_table() explicitly uses early_pg_dir for
32-bit fdt mapping and the pgdir parameter is redundant here.
So remove it and its caller.
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Song Shuai <suagrfillet@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Fixes:
ef69d2559fe9 ("riscv: Move early dtb mapping into the fixmap region")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230426100009.685435-1-suagrfillet@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reid Tonking [Wed, 26 Apr 2023 19:49:56 +0000 (14:49 -0500)]
i2c: omap: Fix standard mode false ACK readings
commit
c770657bd2611b077ec1e7b1fe6aa92f249399bd upstream.
Using standard mode, rare false ACK responses were appearing with
i2cdetect tool. This was happening due to NACK interrupt triggering
ISR thread before register access interrupt was ready. Removing the
NACK interrupt's ability to trigger ISR thread lets register access
ready interrupt do this instead.
Cc: <stable@vger.kernel.org> # v3.7+
Fixes:
3b2f8f82dad7 ("i2c: omap: switch to threaded IRQ support")
Signed-off-by: Reid Tonking <reidt@ti.com>
Acked-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Fri, 28 Apr 2023 13:23:50 +0000 (15:23 +0200)]
ACPI: video: Remove acpi_backlight=video quirk for Lenovo ThinkPad W530
commit
3db66620ea90b0fd4134b31eabfec16d7b07d7e3 upstream.
Remove the acpi_backlight=video quirk for Lenovo ThinkPad W530.
This was intended to help users of the (unsupported) Nvidia binary driver,
but this has been reported to cause backlight control issues for users
who have the gfx configured in hybrid (dual-GPU) mode, so drop this.
The Nvidia binary driver should call acpi_video_register_backlight()
when necessary and this has been reported to Nvidia.
Until this is fixed Nvidia binary driver users can work around this by
passing "acpi_backlight=video" on the kernel commandline (with the latest
6.1.y or newer stable series, kernels < 6.1.y don't need this).
Fixes:
a5b2781dcab2 ("ACPI: video: Add acpi_backlight=video quirk for Lenovo ThinkPad W530")
Reported-by: Русев Путин <rockeraliexpress@gmail.com>
Link: https://lore.kernel.org/linux-acpi/CAK4BXn0ngZRmzx1bodAF8nmYj0PWdUXzPGHofRrsyZj8MBpcVA@mail.gmail.com/
Cc: 6.1+ <stable@vger.kernel.org> # 6.1+
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Namjae Jeon [Tue, 2 May 2023 23:44:14 +0000 (08:44 +0900)]
ksmbd: fix deadlock in ksmbd_find_crypto_ctx()
commit
7b4323373d844954bb76e0e9f39c4e5fc785fa7b upstream.
Deadlock is triggered by sending multiple concurrent session setup
requests. It should be reused after releasing when getting ctx for crypto.
Multiple consecutive ctx uses cause deadlock while waiting for releasing
due to the limited number of ctx.
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-20591
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Namjae Jeon [Tue, 2 May 2023 23:45:08 +0000 (08:45 +0900)]
ksmbd: not allow guest user on multichannel
commit
3353ab2df5f68dab7da8d5ebb427a2d265a1f2b2 upstream.
This patch return STATUS_NOT_SUPPORTED if binding session is guest.
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-20480
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Namjae Jeon [Tue, 2 May 2023 23:26:45 +0000 (08:26 +0900)]
ksmbd: fix memleak in session setup
commit
6d7cb549c2ca20e1f07593f15e936fd54b763028 upstream.
If client send session setup request with unknown NTLMSSP message type,
session that does not included channel can be created. It will cause
session memleak. because ksmbd_sessions_deregister() does not destroy
session if channel is not included. This patch return error response if
client send the request unknown NTLMSSP message type.
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-20593
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Namjae Jeon [Tue, 2 May 2023 23:38:33 +0000 (08:38 +0900)]
ksmbd: fix NULL pointer dereference in smb2_get_info_filesystem()
commit
3ac00a2ab69b34189942afa9e862d5170cdcb018 upstream.
If share is , share->path is NULL and it cause NULL pointer
dereference issue.
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-20479
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Namjae Jeon [Tue, 2 May 2023 23:51:51 +0000 (08:51 +0900)]
ksmbd: call rcu_barrier() in ksmbd_server_exit()
commit
eb307d09fe15844fdaebeb8cc8c9b9e925430aa5 upstream.
racy issue is triggered the bug by racing between closing a connection
and rmmod. In ksmbd, rcu_barrier() is not called at module unload time,
so nothing prevents ksmbd from getting unloaded while it still has RCU
callbacks pending. It leads to trigger unintended execution of kernel
code locally and use to defeat protections such as Kernel Lockdown
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-20477
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Namjae Jeon [Tue, 2 May 2023 23:51:12 +0000 (08:51 +0900)]
ksmbd: fix racy issue under cocurrent smb2 tree disconnect
commit
30210947a343b6b3ca13adc9bfc88e1543e16dd5 upstream.
There is UAF issue under cocurrent smb2 tree disconnect.
This patch introduce TREE_CONN_EXPIRE flags for tcon to avoid cocurrent
access.
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-20592
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Matlack [Fri, 17 Mar 2023 21:11:06 +0000 (14:11 -0700)]
KVM: RISC-V: Retry fault if vma_lookup() results become invalid
commit
2ed90cb0938a45b12eb947af062d12c7af0067b3 upstream.
Read mmu_invalidate_seq before dropping the mmap_lock so that KVM can
detect if the results of vma_lookup() (e.g. vma_shift) become stale
before it acquires kvm->mmu_lock. This fixes a theoretical bug where a
VMA could be changed by userspace after vma_lookup() and before KVM
reads the mmu_invalidate_seq, causing KVM to install page table entries
based on a (possibly) no-longer-valid vma_shift.
Re-order the MMU cache top-up to earlier in user_mem_abort() so that it
is not done after KVM has read mmu_invalidate_seq (i.e. so as to avoid
inducing spurious fault retries).
It's unlikely that any sane userspace currently modifies VMAs in such a
way as to trigger this race. And even with directed testing I was unable
to reproduce it. But a sufficiently motivated host userspace might be
able to exploit this race.
Note KVM/ARM had the same bug and was fixed in a separate, near
identical patch (see Link).
Link: https://lore.kernel.org/kvm/20230313235454.2964067-1-dmatlack@google.com/
Fixes:
9955371cc014 ("RISC-V: KVM: Implement MMU notifiers")
Cc: stable@vger.kernel.org
Signed-off-by: David Matlack <dmatlack@google.com>
Tested-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Hung [Mon, 3 Apr 2023 09:45:41 +0000 (17:45 +0800)]
drm/amd/display: fix a divided-by-zero error
[ Upstream commit
0b5dfe12755f87ec014bb4cc1930485026167430 ]
[Why & How]
timing.dsc_cfg.num_slices_v can be zero and it is necessary to check
before using it.
This fixes the error "divide error: 0000 [#1] PREEMPT SMP NOPTI".
Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hamza Mahfooz [Thu, 5 Jan 2023 15:54:12 +0000 (10:54 -0500)]
drm/amd/display: fix PSR-SU/DSC interoperability support
[ Upstream commit
13b90cf900ab69dd5cab3cc5035bc7614037e64e ]
Currently, there are issues with enabling PSR-SU + DSC. This stems from
the fact that DSC imposes a slice height on transmitted video data and
we are not conforming to that slice height in PSR-SU regions. So, pass
slice_height into su_y_granularity to feed the DSC slice height into
PSR-SU code.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of:
0b5dfe12755f ("drm/amd/display: fix a divided-by-zero error")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniel Miess [Tue, 4 Apr 2023 18:04:11 +0000 (14:04 -0400)]
drm/amd/display: limit timing for single dimm memory
[ Upstream commit
1e994cc0956b8dabd1b1fef315bbd722733b8aa8 ]
[Why]
1. It could hit bandwidth limitdation under single dimm
memory when connecting 8K external monitor.
2. IsSupportedVidPn got validation failed with
2K240Hz eDP + 8K24Hz external monitor.
3. It's better to filter out such combination in
EnumVidPnCofuncModality
4. For short term, filter out in dc bandwidth validation.
[How]
Force 2K@240Hz+8K@24Hz timing validation false in dc.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Daniel Miess <Daniel.Miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nasir Osman [Wed, 1 Feb 2023 19:16:12 +0000 (14:16 -0500)]
drm/amd/display: Remove stutter only configurations
[ Upstream commit
71c4ca2d3b079d0ba4d9b3033641fea906cebfb6 ]
[why]
Newer ASICs such as DCN314 needs to allow for both self refresh and mem
clk switching rather than just self refresh only. Otherwise, we can see
some p-state hangs on ASICs that do support mem clk switching.
[how]
Added an allow_self_refresh_only flag for dcn30_internal_validate_bw
and created a validate_bw method for DCN314 with the allow_self_refresh_only
flag set to false (to support mem clk switching).
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nasir Osman <nasir.osman@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of:
1e994cc0956b ("drm/amd/display: limit timing for single dimm memory")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Zhengming [Wed, 19 Apr 2023 04:02:03 +0000 (12:02 +0800)]
relayfs: fix out-of-bounds access in relay_file_read
commit
43ec16f1450f4936025a9bdf1a273affdb9732c1 upstream.
There is a crash in relay_file_read, as the var from
point to the end of last subbuf.
The oops looks something like:
pc : __arch_copy_to_user+0x180/0x310
lr : relay_file_read+0x20c/0x2c8
Call trace:
__arch_copy_to_user+0x180/0x310
full_proxy_read+0x68/0x98
vfs_read+0xb0/0x1d0
ksys_read+0x6c/0xf0
__arm64_sys_read+0x20/0x28
el0_svc_common.constprop.3+0x84/0x108
do_el0_svc+0x74/0x90
el0_svc+0x1c/0x28
el0_sync_handler+0x88/0xb0
el0_sync+0x148/0x180
We get the condition by analyzing the vmcore:
1). The last produced byte and last consumed byte
both at the end of the last subbuf
2). A softirq calls function(e.g __blk_add_trace)
to write relay buffer occurs when an program is calling
relay_file_read_avail().
relay_file_read
relay_file_read_avail
relay_file_read_consume(buf, 0, 0);
//interrupted by softirq who will write subbuf
....
return 1;
//read_start point to the end of the last subbuf
read_start = relay_file_read_start_pos
//avail is equal to subsize
avail = relay_file_read_subbuf_avail
//from points to an invalid memory address
from = buf->start + read_start
//system is crashed
copy_to_user(buffer, from, avail)
Link: https://lkml.kernel.org/r/20230419040203.37676-1-zhang.zhengming@h3c.com
Fixes:
8d62fdebdaf9 ("relay file read: start-pos fix")
Signed-off-by: Zhang Zhengming <zhang.zhengming@h3c.com>
Reviewed-by: Zhao Lei <zhao_lei1@hoperun.com>
Reviewed-by: Zhou Kete <zhou.kete@h3c.com>
Reviewed-by: Pengcheng Yang <yangpc@wangsu.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oliver Upton [Wed, 12 Apr 2023 06:27:33 +0000 (06:27 +0000)]
KVM: arm64: vgic: Don't acquire its_lock before config_lock
commit
49e5d16b6fc003407a33a9961b4bcbb970bd1c76 upstream.
commit
f00327731131 ("KVM: arm64: Use config_lock to protect vgic
state") was meant to rectify a longstanding lock ordering issue in KVM
where the kvm->lock is taken while holding vcpu->mutex. As it so
happens, the aforementioned commit introduced yet another locking issue
by acquiring the its_lock before acquiring the config lock.
This is obviously wrong, especially considering that the lock ordering
is well documented in vgic.c. Reshuffle the locks once more to take the
config_lock before the its_lock. While at it, sprinkle in the lockdep
hinting that has become popular as of late to keep lockdep apprised of
our ordering.
Cc: stable@vger.kernel.org
Fixes:
f00327731131 ("KVM: arm64: Use config_lock to protect vgic state")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230412062733.988229-1-oliver.upton@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oliver Upton [Mon, 27 Mar 2023 16:47:47 +0000 (16:47 +0000)]
KVM: arm64: Use config_lock to protect vgic state
commit
f00327731131d1b5aa6a1aa9f50bcf8d620ace4c upstream.
Almost all of the vgic state is VM-scoped but accessed from the context
of a vCPU. These accesses were serialized on the kvm->lock which cannot
be nested within a vcpu->mutex critical section.
Move over the vgic state to using the config_lock. Tweak the lock
ordering where necessary to ensure that the config_lock is acquired
after the vcpu->mutex. Acquire the config_lock in kvm_vgic_create() to
avoid a race between the converted flows and GIC creation. Where
necessary, continue to acquire kvm->lock to avoid a race with vCPU
creation (i.e. flows that use lock_all_vcpus()).
Finally, promote the locking expectations in comments to lockdep
assertions and update the locking documentation for the config_lock as
well as vcpu->mutex.
Cc: stable@vger.kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230327164747.2466958-5-oliver.upton@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oliver Upton [Mon, 27 Mar 2023 16:47:46 +0000 (16:47 +0000)]
KVM: arm64: Use config_lock to protect data ordered against KVM_RUN
commit
4bba7f7def6f278266dadf845da472cfbfed784e upstream.
There are various bits of VM-scoped data that can only be configured
before the first call to KVM_RUN, such as the hypercall bitmaps and
the PMU. As these fields are protected by the kvm->lock and accessed
while holding vcpu->mutex, this is yet another example of lock
inversion.
Change out the kvm->lock for kvm->arch.config_lock in all of these
instances. Opportunistically simplify the locking mechanics of the
PMU configuration by holding the config_lock for the entirety of
kvm_arm_pmu_v3_set_attr().
Note that this also addresses a couple of bugs. There is an unguarded
read of the PMU version in KVM_ARM_VCPU_PMU_V3_FILTER which could race
with KVM_ARM_VCPU_PMU_V3_SET_PMU. Additionally, until now writes to the
per-vCPU vPMU irq were not serialized VM-wide, meaning concurrent calls
to KVM_ARM_VCPU_PMU_V3_IRQ could lead to a false positive in
pmu_irq_is_valid().
Cc: stable@vger.kernel.org
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230327164747.2466958-4-oliver.upton@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oliver Upton [Mon, 27 Mar 2023 16:47:45 +0000 (16:47 +0000)]
KVM: arm64: Avoid lock inversion when setting the VM register width
commit
c43120afb5c66a3465c7468f5cf9806a26484cde upstream.
kvm->lock must be taken outside of the vcpu->mutex. Of course, the
locking documentation for KVM makes this abundantly clear. Nonetheless,
the locking order in KVM/arm64 has been wrong for quite a while; we
acquire the kvm->lock while holding the vcpu->mutex all over the shop.
All was seemingly fine until commit
42a90008f890 ("KVM: Ensure lockdep
knows about kvm->lock vs. vcpu->mutex ordering rule") caught us with our
pants down, leading to lockdep barfing:
======================================================
WARNING: possible circular locking dependency detected
6.2.0-rc7+ #19 Not tainted
------------------------------------------------------
qemu-system-aar/859 is trying to acquire lock:
ffff5aa69269eba0 (&host_kvm->lock){+.+.}-{3:3}, at: kvm_reset_vcpu+0x34/0x274
but task is already holding lock:
ffff5aa68768c0b8 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x8c/0xba0
which lock already depends on the new lock.
Add a dedicated lock to serialize writes to VM-scoped configuration from
the context of a vCPU. Protect the register width flags with the new
lock, thus avoiding the need to grab the kvm->lock while holding
vcpu->mutex in kvm_reset_vcpu().
Cc: stable@vger.kernel.org
Reported-by: Jeremy Linton <jeremy.linton@arm.com>
Link: https://lore.kernel.org/kvmarm/f6452cdd-65ff-34b8-bab0-5c06416da5f6@arm.com/
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230327164747.2466958-3-oliver.upton@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oliver Upton [Mon, 27 Mar 2023 16:47:44 +0000 (16:47 +0000)]
KVM: arm64: Avoid vcpu->mutex v. kvm->lock inversion in CPU_ON
commit
0acc7239c20a8401b8968c2adace8f7c9b0295ae upstream.
KVM/arm64 had the lock ordering backwards on vcpu->mutex and kvm->lock
from the very beginning. One such example is the way vCPU resets are
handled: the kvm->lock is acquired while handling a guest CPU_ON PSCI
call.
Add a dedicated lock to serialize writes to kvm_vcpu_arch::{mp_state,
reset_state}. Promote all accessors of mp_state to {READ,WRITE}_ONCE()
as readers do not acquire the mp_state_lock. While at it, plug yet
another race by taking the mp_state_lock in the KVM_SET_MP_STATE ioctl
handler.
As changes to MP state are now guarded with a dedicated lock, drop the
kvm->lock acquisition from the PSCI CPU_ON path. Similarly, move the
reader of reset_state outside of the kvm->lock and instead protect it
with the mp_state_lock. Note that writes to reset_state::reset have been
demoted to regular stores as both readers and writers acquire the
mp_state_lock.
While the kvm->lock inversion still exists in kvm_reset_vcpu(), at least
now PSCI CPU_ON no longer depends on it for serializing vCPU reset.
Cc: stable@vger.kernel.org
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230327164747.2466958-2-oliver.upton@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sean Christopherson [Wed, 5 Apr 2023 00:23:59 +0000 (17:23 -0700)]
KVM: nVMX: Emulate NOPs in L2, and PAUSE if it's not intercepted
commit
4984563823f0034d3533854c1b50e729f5191089 upstream.
Extend VMX's nested intercept logic for emulated instructions to handle
"pause" interception, in quotes because KVM's emulator doesn't filter out
NOPs when checking for nested intercepts. Failure to allow emulation of
NOPs results in KVM injecting a #UD into L2 on any NOP that collides with
the emulator's definition of PAUSE, i.e. on all single-byte NOPs.
For PAUSE itself, honor L1's PAUSE-exiting control, but ignore PLE to
avoid unnecessarily injecting a #UD into L2. Per the SDM, the first
execution of PAUSE after VM-Entry is treated as the beginning of a new
loop, i.e. will never trigger a PLE VM-Exit, and so L1 can't expect any
given execution of PAUSE to deterministically exit.
... the processor considers this execution to be the first execution of
PAUSE in a loop. (It also does so for the first execution of PAUSE at
CPL 0 after VM entry.)
All that said, the PLE side of things is currently a moot point, as KVM
doesn't expose PLE to L1.
Note, vmx_check_intercept() is still wildly broken when L1 wants to
intercept an instruction, as KVM injects a #UD instead of synthesizing a
nested VM-Exit. That issue extends far beyond NOP/PAUSE and needs far
more effort to fix, i.e. is a problem for the future.
Fixes:
07721feee46b ("KVM: nVMX: Don't emulate instructions in guest mode")
Cc: Mathias Krause <minipli@grsecurity.net>
Cc: stable@vger.kernel.org
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20230405002359.418138-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Roberto Sassu [Fri, 31 Mar 2023 12:32:18 +0000 (14:32 +0200)]
reiserfs: Add security prefix to xattr name in reiserfs_security_write()
commit
d82dcd9e21b77d338dc4875f3d4111f0db314a7c upstream.
Reiserfs sets a security xattr at inode creation time in two stages: first,
it calls reiserfs_security_init() to obtain the xattr from active LSMs;
then, it calls reiserfs_security_write() to actually write that xattr.
Unfortunately, it seems there is a wrong expectation that LSMs provide the
full xattr name in the form 'security.<suffix>'. However, LSMs always
provided just the suffix, causing reiserfs to not write the xattr at all
(if the suffix is shorter than the prefix), or to write an xattr with the
wrong name.
Add a temporary buffer in reiserfs_security_write(), and write to it the
full xattr name, before passing it to reiserfs_xattr_set_handle().
Also replace the name length check with a check that the full xattr name is
not larger than XATTR_NAME_MAX.
Cc: stable@vger.kernel.org # v2.6.x
Fixes:
57fe60df6241 ("reiserfs: add atomic addition of selinux attributes during inode creation")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zheng Yejian [Fri, 6 Jan 2023 07:09:34 +0000 (15:09 +0800)]
rcu: Avoid stack overflow due to __rcu_irq_enter_check_tick() being kprobe-ed
commit
7a29fb4a4771124bc61de397dbfc1554dbbcc19c upstream.
Registering a kprobe on __rcu_irq_enter_check_tick() can cause kernel
stack overflow as shown below. This issue can be reproduced by enabling
CONFIG_NO_HZ_FULL and booting the kernel with argument "nohz_full=",
and then giving the following commands at the shell prompt:
# cd /sys/kernel/tracing/
# echo 'p:mp1 __rcu_irq_enter_check_tick' >> kprobe_events
# echo 1 > events/kprobes/enable
This commit therefore adds __rcu_irq_enter_check_tick() to the kprobes
blacklist using NOKPROBE_SYMBOL().
Insufficient stack space to handle exception!
ESR: 0x00000000f2000004 -- BRK (AArch64)
FAR: 0x0000ffffccf3e510
Task stack: [0xffff80000ad30000..0xffff80000ad38000]
IRQ stack: [0xffff800008050000..0xffff800008058000]
Overflow stack: [0xffff089c36f9f310..0xffff089c36fa0310]
CPU: 5 PID: 190 Comm: bash Not tainted 6.2.0-rc2-00320-g1f5abbd77e2c #19
Hardware name: linux,dummy-virt (DT)
pstate:
400003c5 (nZcv DAIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __rcu_irq_enter_check_tick+0x0/0x1b8
lr : ct_nmi_enter+0x11c/0x138
sp :
ffff80000ad30080
x29:
ffff80000ad30080 x28:
ffff089c82e20000 x27:
0000000000000000
x26:
0000000000000000 x25:
ffff089c02a8d100 x24:
0000000000000000
x23:
00000000400003c5 x22:
0000ffffccf3e510 x21:
ffff089c36fae148
x20:
ffff80000ad30120 x19:
ffffa8da8fcce148 x18:
0000000000000000
x17:
0000000000000000 x16:
0000000000000000 x15:
ffffa8da8e44ea6c
x14:
ffffa8da8e44e968 x13:
ffffa8da8e03136c x12:
1fffe113804d6809
x11:
ffff6113804d6809 x10:
0000000000000a60 x9 :
dfff800000000000
x8 :
ffff089c026b404f x7 :
00009eec7fb297f7 x6 :
0000000000000001
x5 :
ffff80000ad30120 x4 :
dfff800000000000 x3 :
ffffa8da8e3016f4
x2 :
0000000000000003 x1 :
0000000000000000 x0 :
0000000000000000
Kernel panic - not syncing: kernel stack overflow
CPU: 5 PID: 190 Comm: bash Not tainted 6.2.0-rc2-00320-g1f5abbd77e2c #19
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0xf8/0x108
show_stack+0x20/0x30
dump_stack_lvl+0x68/0x84
dump_stack+0x1c/0x38
panic+0x214/0x404
add_taint+0x0/0xf8
panic_bad_stack+0x144/0x160
handle_bad_stack+0x38/0x58
__bad_stack+0x78/0x7c
__rcu_irq_enter_check_tick+0x0/0x1b8
arm64_enter_el1_dbg.isra.0+0x14/0x20
el1_dbg+0x2c/0x90
el1h_64_sync_handler+0xcc/0xe8
el1h_64_sync+0x64/0x68
__rcu_irq_enter_check_tick+0x0/0x1b8
arm64_enter_el1_dbg.isra.0+0x14/0x20
el1_dbg+0x2c/0x90
el1h_64_sync_handler+0xcc/0xe8
el1h_64_sync+0x64/0x68
__rcu_irq_enter_check_tick+0x0/0x1b8
arm64_enter_el1_dbg.isra.0+0x14/0x20
el1_dbg+0x2c/0x90
el1h_64_sync_handler+0xcc/0xe8
el1h_64_sync+0x64/0x68
__rcu_irq_enter_check_tick+0x0/0x1b8
[...]
el1_dbg+0x2c/0x90
el1h_64_sync_handler+0xcc/0xe8
el1h_64_sync+0x64/0x68
__rcu_irq_enter_check_tick+0x0/0x1b8
arm64_enter_el1_dbg.isra.0+0x14/0x20
el1_dbg+0x2c/0x90
el1h_64_sync_handler+0xcc/0xe8
el1h_64_sync+0x64/0x68
__rcu_irq_enter_check_tick+0x0/0x1b8
arm64_enter_el1_dbg.isra.0+0x14/0x20
el1_dbg+0x2c/0x90
el1h_64_sync_handler+0xcc/0xe8
el1h_64_sync+0x64/0x68
__rcu_irq_enter_check_tick+0x0/0x1b8
el1_interrupt+0x28/0x60
el1h_64_irq_handler+0x18/0x28
el1h_64_irq+0x64/0x68
__ftrace_set_clr_event_nolock+0x98/0x198
__ftrace_set_clr_event+0x58/0x80
system_enable_write+0x144/0x178
vfs_write+0x174/0x738
ksys_write+0xd0/0x188
__arm64_sys_write+0x4c/0x60
invoke_syscall+0x64/0x180
el0_svc_common.constprop.0+0x84/0x160
do_el0_svc+0x48/0xe8
el0_svc+0x34/0xd0
el0t_64_sync_handler+0xb8/0xc0
el0t_64_sync+0x190/0x194
SMP: stopping secondary CPUs
Kernel Offset: 0x28da86000000 from 0xffff800008000000
PHYS_OFFSET: 0xfffff76600000000
CPU features: 0x00000,
01a00100,
0000421b
Memory Limit: none
Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Link: https://lore.kernel.org/all/20221119040049.795065-1-zhengyejian1@huawei.com/
Fixes:
aaf2bc50df1f ("rcu: Abstract out rcu_irq_enter_check_tick() from rcu_nmi_enter()")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mario Limonciello [Mon, 3 Apr 2023 17:38:01 +0000 (12:38 -0500)]
crypto: ccp - Don't initialize CCP for PSP 0x1649
commit
c79a3169b9f3633c215b55857eba5921e5b49217 upstream.
A number of platforms are emitting the error:
```ccp: unable to access the device: you might be running a broken BIOS.```
This is expected behavior as CCP is no longer accessible from the PSP's
PCIe BAR so stop trying to probe CCP for 0x1649.
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Mon, 27 Feb 2023 06:32:23 +0000 (22:32 -0800)]
crypto: arm64/aes-neonbs - fix crash with CFI enabled
commit
47446d7cd42358ca7d7a544f2f7823db03f616ff upstream.
aesbs_ecb_encrypt(), aesbs_ecb_decrypt(), aesbs_xts_encrypt(), and
aesbs_xts_decrypt() are called via indirect function calls. Therefore
they need to use SYM_TYPED_FUNC_START instead of SYM_FUNC_START to cause
their type hashes to be emitted when the kernel is built with
CONFIG_CFI_CLANG=y. Otherwise, the code crashes with a CFI failure if
the compiler doesn't happen to optimize out the indirect calls.
Fixes:
c50d32859e70 ("arm64: Add types to indirect called assembly functions")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jonathan McDowell [Tue, 28 Feb 2023 18:28:58 +0000 (18:28 +0000)]
crypto: safexcel - Cleanup ring IRQ workqueues on load failure
commit
ca25c00ccbc5f942c63897ed23584cfc66e8ec81 upstream.
A failure loading the safexcel driver results in the following warning
on boot, because the IRQ affinity has not been correctly cleaned up.
Ensure we clean up the affinity and workqueues on a failure to load the
driver.
crypto-safexcel: probe of
f2800000.crypto failed with error -2
------------[ cut here ]------------
WARNING: CPU: 1 PID: 232 at kernel/irq/manage.c:1913 free_irq+0x300/0x340
Modules linked in: hwmon mdio_i2c crypto_safexcel(+) md5 sha256_generic libsha256 authenc libdes omap_rng rng_core nft_masq nft_nat nft_chain_nat nf_nat nft_ct nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables libcrc32c nfnetlink fuse autofs4
CPU: 1 PID: 232 Comm: systemd-udevd Tainted: G W 6.1.6-00002-g9d4898824677 #3
Hardware name: MikroTik RB5009 (DT)
pstate:
600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : free_irq+0x300/0x340
lr : free_irq+0x2e0/0x340
sp :
ffff800008fa3890
x29:
ffff800008fa3890 x28:
0000000000000000 x27:
0000000000000000
x26:
ffff8000008e6dc0 x25:
ffff000009034cac x24:
ffff000009034d50
x23:
0000000000000000 x22:
000000000000004a x21:
ffff0000093e0d80
x20:
ffff000009034c00 x19:
ffff00000615fc00 x18:
0000000000000000
x17:
0000000000000000 x16:
0000000000000000 x15:
000075f5c1584c5e
x14:
0000000000000017 x13:
0000000000000000 x12:
0000000000000040
x11:
ffff000000579b60 x10:
ffff000000579b62 x9 :
ffff800008bbe370
x8 :
ffff000000579dd0 x7 :
0000000000000000 x6 :
ffff000000579e18
x5 :
ffff000000579da8 x4 :
ffff800008ca0000 x3 :
ffff800008ca0188
x2 :
0000000013033204 x1 :
ffff000009034c00 x0 :
ffff8000087eadf0
Call trace:
free_irq+0x300/0x340
devm_irq_release+0x14/0x20
devres_release_all+0xa0/0x100
device_unbind_cleanup+0x14/0x60
really_probe+0x198/0x2d4
__driver_probe_device+0x74/0xdc
driver_probe_device+0x3c/0x110
__driver_attach+0x8c/0x190
bus_for_each_dev+0x6c/0xc0
driver_attach+0x20/0x30
bus_add_driver+0x148/0x1fc
driver_register+0x74/0x120
__platform_driver_register+0x24/0x30
safexcel_init+0x48/0x1000 [crypto_safexcel]
do_one_initcall+0x4c/0x1b0
do_init_module+0x44/0x1cc
load_module+0x1724/0x1be4
__do_sys_finit_module+0xbc/0x110
__arm64_sys_finit_module+0x1c/0x24
invoke_syscall+0x44/0x110
el0_svc_common.constprop.0+0xc0/0xe0
do_el0_svc+0x20/0x80
el0_svc+0x14/0x4c
el0t_64_sync_handler+0xb0/0xb4
el0t_64_sync+0x148/0x14c
---[ end trace
0000000000000000 ]---
Fixes:
1b44c5a60c13 ("inside-secure - add SafeXcel EIP197 crypto engine driver")
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Toke Høiland-Jørgensen [Mon, 13 Mar 2023 09:17:24 +0000 (10:17 +0100)]
crypto: api - Demote BUG_ON() in crypto_unregister_alg() to a WARN_ON()
commit
a543ada7db729514ddd3ba4efa45f4c7b802ad85 upstream.
The crypto_unregister_alg() function expects callers to ensure that any
algorithm that is unregistered has a refcnt of exactly 1, and issues a
BUG_ON() if this is not the case. However, there are in fact drivers that
will call crypto_unregister_alg() without ensuring that the refcnt has been
lowered first, most notably on system shutdown. This causes the BUG_ON() to
trigger, which prevents a clean shutdown and hangs the system.
To avoid such hangs on shutdown, demote the BUG_ON() in
crypto_unregister_alg() to a WARN_ON() with early return. Cc stable because
this problem was observed on a 6.2 kernel, cf the link below.
Link: https://lore.kernel.org/r/87r0tyq8ph.fsf@toke.dk
Cc: stable@vger.kernel.org
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johannes Berg [Thu, 27 Apr 2023 15:59:20 +0000 (17:59 +0200)]
ring-buffer: Sync IRQ works before buffer destruction
commit
675751bb20634f981498c7d66161584080cc061e upstream.
If something was written to the buffer just before destruction,
it may be possible (maybe not in a real system, but it did
happen in ARCH=um with time-travel) to destroy the ringbuffer
before the IRQ work ran, leading this KASAN report (or a crash
without KASAN):
BUG: KASAN: slab-use-after-free in irq_work_run_list+0x11a/0x13a
Read of size 8 at addr
000000006d640a48 by task swapper/0
CPU: 0 PID: 0 Comm: swapper Tainted: G W O 6.3.0-rc1 #7
Stack:
60c4f20f 0c203d48 41b58ab3 60f224fc
600477fa 60f35687 60c4f20f 601273dd
00000008 6101eb00 6101eab0 615be548
Call Trace:
[<
60047a58>] show_stack+0x25e/0x282
[<
60c609e0>] dump_stack_lvl+0x96/0xfd
[<
60c50d4c>] print_report+0x1a7/0x5a8
[<
603078d3>] kasan_report+0xc1/0xe9
[<
60308950>] __asan_report_load8_noabort+0x1b/0x1d
[<
60232844>] irq_work_run_list+0x11a/0x13a
[<
602328b4>] irq_work_tick+0x24/0x34
[<
6017f9dc>] update_process_times+0x162/0x196
[<
6019f335>] tick_sched_handle+0x1a4/0x1c3
[<
6019fd9e>] tick_sched_timer+0x79/0x10c
[<
601812b9>] __hrtimer_run_queues.constprop.0+0x425/0x695
[<
60182913>] hrtimer_interrupt+0x16c/0x2c4
[<
600486a3>] um_timer+0x164/0x183
[...]
Allocated by task 411:
save_stack_trace+0x99/0xb5
stack_trace_save+0x81/0x9b
kasan_save_stack+0x2d/0x54
kasan_set_track+0x34/0x3e
kasan_save_alloc_info+0x25/0x28
____kasan_kmalloc+0x8b/0x97
__kasan_kmalloc+0x10/0x12
__kmalloc+0xb2/0xe8
load_elf_phdrs+0xee/0x182
[...]
The buggy address belongs to the object at
000000006d640800
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 584 bytes inside of
freed 1024-byte region [
000000006d640800,
000000006d640c00)
Add the appropriate irq_work_sync() so the work finishes before
the buffers are destroyed.
Prior to the commit in the Fixes tag below, there was only a
single global IRQ work, so this issue didn't exist.
Link: https://lore.kernel.org/linux-trace-kernel/20230427175920.a76159263122.I8295e405c44362a86c995e9c2c37e3e03810aa56@changeid
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes:
15693458c4bc ("tracing/ring-buffer: Move poll wake ups into ring buffer code")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tze-nan Wu [Wed, 26 Apr 2023 06:20:23 +0000 (14:20 +0800)]
ring-buffer: Ensure proper resetting of atomic variables in ring_buffer_reset_online_cpus
commit
7c339fb4d8577792378136c15fde773cfb863cb8 upstream.
In ring_buffer_reset_online_cpus, the buffer_size_kb write operation
may permanently fail if the cpu_online_mask changes between two
for_each_online_buffer_cpu loops. The number of increases and decreases
on both cpu_buffer->resize_disabled and cpu_buffer->record_disabled may be
inconsistent, causing some CPUs to have non-zero values for these atomic
variables after the function returns.
This issue can be reproduced by "echo 0 > trace" while hotplugging cpu.
After reproducing success, we can find out buffer_size_kb will not be
functional anymore.
To prevent leaving 'resize_disabled' and 'record_disabled' non-zero after
ring_buffer_reset_online_cpus returns, we ensure that each atomic variable
has been set up before atomic_sub() to it.
Link: https://lore.kernel.org/linux-trace-kernel/20230426062027.17451-1-Tze-nan.Wu@mediatek.com
Cc: stable@vger.kernel.org
Cc: <mhiramat@kernel.org>
Cc: npiggin@gmail.com
Fixes:
b23d7a5f4a07 ("ring-buffer: speed up buffer resets by avoiding synchronize_rcu for each CPU")
Reviewed-by: Cheng-Jui Wang <cheng-jui.wang@mediatek.com>
Signed-off-by: Tze-nan Wu <Tze-nan.Wu@mediatek.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krzysztof Kozlowski [Thu, 9 Mar 2023 15:49:46 +0000 (16:49 +0100)]
pinctrl: qcom: lpass-lpi: set output value before enabling output
commit
163bfb0cb1f6fbf961cf912cbde57399ea1ae0e8 upstream.
As per Hardware Programming Guide, when configuring pin as output,
set the pin value before setting output-enable (OE). Similar approach
is in main SoC TLMM pin controller.
Cc: <stable@vger.kernel.org>
Fixes:
6e261d1090d6 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230309154949.658380-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krzysztof Kozlowski [Wed, 22 Feb 2023 14:03:43 +0000 (15:03 +0100)]
soundwire: qcom: correct setting ignore bit on v1.5.1
commit
bd934f77eeac377e81ddac8673803e7334b82d3d upstream.
According to the comment and to downstream sources, the
SWRM_CONTINUE_EXEC_ON_CMD_IGNORE in SWRM_CMD_FIFO_CFG_ADDR register
should be set for v1.5.1 and newer, so fix the >= operator.
Fixes:
542d3491cdd7 ("soundwire: qcom: set continue execution flag for ignored commands")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230222140343.188691-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Heiner Kallweit [Tue, 11 Apr 2023 05:34:11 +0000 (07:34 +0200)]
pwm: meson: Fix g12a ao clk81 name
commit
9e4fa80ab7ef9eb4f7b1ea9fc31e0eb040e85e25 upstream.
Fix the name of the aoclk81 clock. Apparently name aoclk81 as used by
the vendor driver was changed when mainlining the g12a clock driver.
Fixes:
f41efceb46e6 ("pwm: meson: Add clock source configuration for Meson G12A")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Heiner Kallweit [Sun, 9 Apr 2023 15:15:52 +0000 (17:15 +0200)]
pwm: meson: Fix axg ao mux parents
commit
eb411c0cf59ae6344b34bc6f0d298a22b300627e upstream.
This fix is basically the same as
9bce02ef0dfa ("pwm: meson: Fix the
G12A AO clock parents order"). Vendor driver referenced there has
xtal as first parent also for axg ao. In addition fix the name
of the aoclk81 clock. Apparently name aoclk81 as used by the vendor
driver was changed when mainlining the axg clock driver.
Fixes:
bccaa3f917c9 ("pwm: meson: Add clock source configuration for Meson-AXG")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Felix Fietkau [Fri, 14 Apr 2023 12:10:54 +0000 (14:10 +0200)]
wifi: mt76: add missing locking to protect against concurrent rx/status calls
commit
5b8ccdfb943f6a03c676d2ea816dd38c149e920b upstream.
According to the documentation, ieee80211_rx_list must not run concurrently
with ieee80211_tx_status (or its variants).
Cc: stable@vger.kernel.org
Fixes:
88046b2c9f6d ("mt76: add support for reporting tx status with skb")
Reported-by: Brian Coverstone <brian@mainsequence.net>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kees Cook [Thu, 2 Mar 2023 22:49:50 +0000 (14:49 -0800)]
kheaders: Use array declaration instead of char
commit
b69edab47f1da8edd8e7bfdf8c70f51a2a5d89fb upstream.
Under CONFIG_FORTIFY_SOURCE, memcpy() will check the size of destination
and source buffers. Defining kernel_headers_data as "char" would trip
this check. Since these addresses are treated as byte arrays, define
them as arrays (as done everywhere else).
This was seen with:
$ cat /sys/kernel/kheaders.tar.xz >> /dev/null
detected buffer overflow in memcpy
kernel BUG at lib/string_helpers.c:1027!
...
RIP: 0010:fortify_panic+0xf/0x20
[...]
Call Trace:
<TASK>
ikheaders_read+0x45/0x50 [kheaders]
kernfs_fop_read_iter+0x1a4/0x2f0
...
Reported-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/20230302112130.6e402a98@kernel.org/
Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Jakub Kicinski <kuba@kernel.org>
Fixes:
43d8ce9d65a5 ("Provide in-kernel headers to make extending kernel easier")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230302224946.never.243-kees@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
William Breathitt Gray [Thu, 6 Apr 2023 14:40:10 +0000 (10:40 -0400)]
iio: addac: stx104: Fix race condition for stx104_write_raw()
commit
9740827468cea80c42db29e7171a50e99acf7328 upstream.
The priv->chan_out_states array and actual DAC value can become
mismatched if stx104_write_raw() is called concurrently. Prevent such a
race condition by utilizing a mutex.
Fixes:
97a445dad37a ("iio: Add IIO support for the DAC on the Apex Embedded Systems STX104")
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/c95c9a77fcef36b2a052282146950f23bbc1ebdc.1680790580.git.william.gray@linaro.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
William Breathitt Gray [Thu, 6 Apr 2023 14:40:11 +0000 (10:40 -0400)]
iio: addac: stx104: Fix race condition when converting analog-to-digital
commit
4f9b80aefb9e2f542a49d9ec087cf5919730e1dd upstream.
The ADC conversion procedure requires several device I/O operations
performed in a particular sequence. If stx104_read_raw() is called
concurrently, the ADC conversion procedure could be clobbered. Prevent
such a race condition by utilizing a mutex.
Fixes:
4075a283ae83 ("iio: stx104: Add IIO support for the ADC channels")
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/2ae5e40eed5006ca735e4c12181a9ff5ced65547.1680790580.git.william.gray@linaro.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhang Yuchen [Wed, 12 Apr 2023 07:49:07 +0000 (15:49 +0800)]
ipmi: fix SSIF not responding under certain cond.
commit
6d2555cde2918409b0331560e66f84a0ad4849c6 upstream.
The ipmi communication is not restored after a specific version of BMC is
upgraded on our server.
The ipmi driver does not respond after printing the following log:
ipmi_ssif: Invalid response getting flags: 1c 1
I found that after entering this branch, ssif_info->ssif_state always
holds SSIF_GETTING_FLAGS and never return to IDLE.
As a result, the driver cannot be loaded, because the driver status is
checked during the unload process and must be IDLE in shutdown_ssif():
while (ssif_info->ssif_state != SSIF_IDLE)
schedule_timeout(1);
The process trigger this problem is:
1. One msg timeout and next msg start send, and call
ssif_set_need_watch().
2. ssif_set_need_watch()->watch_timeout()->start_flag_fetch() change
ssif_state to SSIF_GETTING_FLAGS.
3. In msg_done_handler() ssif_state == SSIF_GETTING_FLAGS, if an error
message is received, the second branch does not modify the ssif_state.
4. All retry action need IS_SSIF_IDLE() == True. Include retry action in
watch_timeout(), msg_done_handler(). Sending msg does not work either.
SSIF_IDLE is also checked in start_next_msg().
5. The only thing that can be triggered in the SSIF driver is
watch_timeout(), after destory_user(), this timer will stop too.
So, if enter this branch, the ssif_state will remain SSIF_GETTING_FLAGS
and can't send msg, no timer started, can't unload.
We did a comparative test before and after adding this patch, and the
result is effective.
Fixes:
259307074bfc ("ipmi: Add SMBus interface driver (SSIF)")
Cc: stable@vger.kernel.org
Signed-off-by: Zhang Yuchen <zhangyuchen.lcr@bytedance.com>
Message-Id: <
20230412074907.80046-1-zhangyuchen.lcr@bytedance.com>
Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Corey Minyard [Tue, 4 Apr 2023 12:09:14 +0000 (12:09 +0000)]
ipmi:ssif: Add send_retries increment
commit
6ce7995a43febe693d4894033c6e29314970646a upstream.
A recent change removed an increment of send_retries, re-add it.
Fixes:
95767ed78a18 ipmi:ssif: resend_msg() cannot fail
Reported-by: Pavel Machek <pavel@denx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiaxun Yang [Tue, 11 Apr 2023 11:14:26 +0000 (12:14 +0100)]
MIPS: fw: Allow firmware to pass a empty env
commit
ee1809ed7bc456a72dc8410b475b73021a3a68d5 upstream.
fw_getenv will use env entry to determine style of env,
however it is legal for firmware to just pass a empty list.
Check if first entry exist before running strchr to avoid
null pointer dereference.
Cc: stable@vger.kernel.org
Link: https://github.com/clbr/n64bootloader/issues/5
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kefeng Wang [Fri, 31 Mar 2023 08:45:02 +0000 (16:45 +0800)]
fs: fix sysctls.c built
commit
e3184de9d46c2eebdb776face2e2662c6733331d upstream.
'obj-$(CONFIG_SYSCTL) += sysctls.o' must be moved after "obj-y :=",
or it won't be built as it is overwrited.
Note that there is nothing that is going to break by linking
sysctl.o later, we were just being way to cautious and patches
have been updated to reflect these considerations and sent for
stable as well with the whole "base" stuff needing to be linked
prior to child sysctl tables that use that directory. All of
the kernel sysctl APIs always share the same directory, and races
against using it should end up re-using the same single created
directory.
And so something we can do eventually is do away with all the base stuff.
For now it's fine, it's not creating an issue. It is just a bit pedantic
and careful.
Fixes:
ab171b952c6e ("fs: move namespace sysctls and declare fs base directory")
Cc: stable@vger.kernel.org # v5.17
Cc: Christian Brauner <brauner@kernel.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
[mcgrof: enhanced commit log for stable criteria and clarify base stuff ]
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joel Fernandes (Google) [Tue, 24 Jan 2023 17:31:26 +0000 (17:31 +0000)]
tick/nohz: Fix cpu_is_hotpluggable() by checking with nohz subsystem
commit
58d7668242647e661a20efe065519abd6454287e upstream.
For CONFIG_NO_HZ_FULL systems, the tick_do_timer_cpu cannot be offlined.
However, cpu_is_hotpluggable() still returns true for those CPUs. This causes
torture tests that do offlining to end up trying to offline this CPU causing
test failures. Such failure happens on all architectures.
Fix the repeated error messages thrown by this (even if the hotplug errors are
harmless) by asking the opinion of the nohz subsystem on whether the CPU can be
hotplugged.
[ Apply Frederic Weisbecker feedback on refactoring tick_nohz_cpu_down(). ]
For drivers/base/ portion:
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Zhouyi Zhou <zhouzhouyi@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: rcu <rcu@vger.kernel.org>
Cc: stable@vger.kernel.org
Fixes:
2987557f52b9 ("driver-core/cpu: Expose hotpluggability to the rest of the kernel")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kundrát [Wed, 5 Apr 2023 20:14:23 +0000 (22:14 +0200)]
serial: max310x: fix IO data corruption in batched operations
commit
3f42b142ea1171967e40e10e4b0241c0d6d28d41 upstream.
After upgrading from 5.16 to 6.1, our board with a MAX14830 started
producing lots of garbage data over UART. Bisection pointed out commit
285e76fc049c as the culprit. That patch tried to replace hand-written
code which I added in
2b4bac48c1084 ("serial: max310x: Use batched reads
when reasonably safe") with the generic regmap infrastructure for
batched operations.
Unfortunately, the `regmap_raw_read` and `regmap_raw_write` which were
used are actually functions which perform IO over *multiple* registers.
That's not what is needed for accessing these Tx/Rx FIFOs; the
appropriate functions are the `_noinc_` versions, not the `_raw_` ones.
Fix this regression by using `regmap_noinc_read()` and
`regmap_noinc_write()` along with the necessary `regmap_config` setup;
with this patch in place, our board communicates happily again. Since
our board uses SPI for talking to this chip, the I2C part is completely
untested.
Fixes:
285e76fc049c ("serial: max310x: use regmap methods for SPI batch operations")
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Link: https://lore.kernel.org/r/79db8e82aadb0e174bc82b9996423c3503c8fb37.1680732084.git.jan.kundrat@cesnet.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ilpo Järvinen [Fri, 17 Mar 2023 11:33:18 +0000 (13:33 +0200)]
serial: 8250: Fix serial8250_tx_empty() race with DMA Tx
commit
146a37e05d620cef4ad430e5d1c9c077fe6fa76f upstream.
There's a potential race before THRE/TEMT deasserts when DMA Tx is
starting up (or the next batch of continuous Tx is being submitted).
This can lead to misdetecting Tx empty condition.
It is entirely normal for THRE/TEMT to be set for some time after the
DMA Tx had been setup in serial8250_tx_dma(). As Tx side is definitely
not empty at that point, it seems incorrect for serial8250_tx_empty()
claim Tx is empty.
Fix the race by also checking in serial8250_tx_empty() whether there's
DMA Tx active.
Note: This fix only addresses in-kernel race mainly to make using
TCSADRAIN/FLUSH robust. Userspace can still cause other races but they
seem userspace concurrency control problems.
Fixes:
9ee4b83e51f74 ("serial: 8250: Add support for dmaengine")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230317113318.31327-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Wed, 12 Apr 2023 12:48:11 +0000 (14:48 +0200)]
serial: fix TIOCSRS485 locking
commit
9e4f2a8004213339e9d837d891a59cc80e082966 upstream.
The RS485 multipoint addressing support for some reason added a new
ADDRB termios cflag which is (only!) updated from one of the RS485
ioctls.
Make sure to take the termios rw semaphore for the right ioctl (i.e.
set, not get).
Fixes:
ae50bb275283 ("serial: take termios_rwsem for ->rs485_config() & pass termios as param")
Cc: stable@vger.kernel.org # 6.0
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20230412124811.11217-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Wed, 5 Apr 2023 09:03:42 +0000 (11:03 +0200)]
xhci: fix debugfs register accesses while suspended
commit
735baf1b23458f71a8b15cb924af22c9ff9cd125 upstream.
Wire up the debugfs regset device pointer so that the controller is
resumed before accessing registers to avoid crashing or locking up if it
happens to be runtime suspended.
Fixes:
02b6fdc2a153 ("usb: xhci: Add debugfs interface for xHCI driver")
Cc: stable@vger.kernel.org # 4.15: 30332eeefec8: debugfs: regset32: Add Runtime PM support
Cc: stable@vger.kernel.org # 4.15
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230405090342.7363-1-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ilpo Järvinen [Fri, 17 Mar 2023 11:33:17 +0000 (13:33 +0200)]
tty: Prevent writing chars during tcsetattr TCSADRAIN/FLUSH
commit
094fb49a2d0d6827c86d2e0840873e6db0c491d2 upstream.
If userspace races tcsetattr() with a write, the drained condition
might not be guaranteed by the kernel. There is a race window after
checking Tx is empty before tty_set_termios() takes termios_rwsem for
write. During that race window, more characters can be queued by a
racing writer.
Any ongoing transmission might produce garbage during HW's
->set_termios() call. The intent of TCSADRAIN/FLUSH seems to be
preventing such a character corruption. If those flags are set, take
tty's write lock to stop any writer before performing the lower layer
Tx empty check and wait for the pending characters to be sent (if any).
The initial wait for all-writers-done must be placed outside of tty's
write lock to avoid deadlock which makes it impossible to use
tty_wait_until_sent(). The write lock is retried if a racing write is
detected.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230317113318.31327-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nuno Sá [Mon, 27 Mar 2023 14:54:14 +0000 (16:54 +0200)]
staging: iio: resolver: ads1210: fix config mode
commit
16313403d873ff17a587818b61f84c8cb4971cef upstream.
As stated in the device datasheet [1], bits a0 and a1 have to be set to
1 for the configuration mode.
[1]: https://www.analog.com/media/en/technical-documentation/data-sheets/ad2s1210.pdf
Fixes:
b19e9ad5e2cb9 ("staging:iio:resolver:ad2s1210 general driver cleanup")
Cc: stable <stable@kernel.org>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20230327145414.1505537-1-nuno.sa@analog.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Thu, 4 May 2023 03:54:17 +0000 (20:54 -0700)]
blk-crypto: make blk_crypto_evict_key() more robust
commit
5c7cb94452901a93e90c2230632e2c12a681bc92 upstream.
If blk_crypto_evict_key() sees that the key is still in-use (due to a
bug) or that ->keyslot_evict failed, it currently just returns while
leaving the key linked into the keyslot management structures.
However, blk_crypto_evict_key() is only called in contexts such as inode
eviction where failure is not an option. So actually the caller
proceeds with freeing the blk_crypto_key regardless of the return value
of blk_crypto_evict_key().
These two assumptions don't match, and the result is that there can be a
use-after-free in blk_crypto_reprogram_all_keys() after one of these
errors occurs. (Note, these errors *shouldn't* happen; we're just
talking about what happens if they do anyway.)
Fix this by making blk_crypto_evict_key() unlink the key from the
keyslot management structures even on failure.
Also improve some comments.
Fixes:
1b2628397058 ("block: Keyslot Manager for Inline Encryption")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230315183907.53675-2-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Thu, 4 May 2023 03:54:16 +0000 (20:54 -0700)]
blk-crypto: make blk_crypto_evict_key() return void
commit
70493a63ba04f754f7a7dd53a4fcc82700181490 upstream.
blk_crypto_evict_key() is only called in contexts such as inode eviction
where failure is not an option. So there is nothing the caller can do
with errors except log them. (dm-table.c does "use" the error code, but
only to pass on to upper layers, so it doesn't really count.)
Just make blk_crypto_evict_key() return void and log errors itself.
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230315183907.53675-2-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Thu, 4 May 2023 03:54:15 +0000 (20:54 -0700)]
blk-mq: release crypto keyslot before reporting I/O complete
commit
9cd1e566676bbcb8a126acd921e4e194e6339603 upstream.
Once all I/O using a blk_crypto_key has completed, filesystems can call
blk_crypto_evict_key(). However, the block layer currently doesn't call
blk_crypto_put_keyslot() until the request is being freed, which happens
after upper layers have been told (via bio_endio()) the I/O has
completed. This causes a race condition where blk_crypto_evict_key()
can see 'slot_refs != 0' without there being an actual bug.
This makes __blk_crypto_evict_key() hit the
'WARN_ON_ONCE(atomic_read(&slot->slot_refs) != 0)' and return without
doing anything, eventually causing a use-after-free in
blk_crypto_reprogram_all_keys(). (This is a very rare bug and has only
been seen when per-file keys are being used with fscrypt.)
There are two options to fix this: either release the keyslot before
bio_endio() is called on the request's last bio, or make
__blk_crypto_evict_key() ignore slot_refs. Let's go with the first
solution, since it preserves the ability to report bugs (via
WARN_ON_ONCE) where a key is evicted while still in-use.
Fixes:
a892c8d52c02 ("block: Inline encryption support for blk-mq")
Cc: stable@vger.kernel.org
Reviewed-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230315183907.53675-2-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bart Van Assche [Thu, 4 May 2023 03:54:14 +0000 (20:54 -0700)]
blk-crypto: Add a missing include directive
commit
85168d416e5d3184b77dbec8fee75c9439894afa upstream.
Allow the compiler to verify consistency of function declarations and
function definitions. This patch fixes the following sparse errors:
block/blk-crypto-profile.c:241:14: error: no previous prototype for ‘blk_crypto_get_keyslot’ [-Werror=missing-prototypes]
241 | blk_status_t blk_crypto_get_keyslot(struct blk_crypto_profile *profile,
| ^~~~~~~~~~~~~~~~~~~~~~
block/blk-crypto-profile.c:318:6: error: no previous prototype for ‘blk_crypto_put_keyslot’ [-Werror=missing-prototypes]
318 | void blk_crypto_put_keyslot(struct blk_crypto_keyslot *slot)
| ^~~~~~~~~~~~~~~~~~~~~~
block/blk-crypto-profile.c:344:6: error: no previous prototype for ‘__blk_crypto_cfg_supported’ [-Werror=missing-prototypes]
344 | bool __blk_crypto_cfg_supported(struct blk_crypto_profile *profile,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
block/blk-crypto-profile.c:373:5: error: no previous prototype for ‘__blk_crypto_evict_key’ [-Werror=missing-prototypes]
373 | int __blk_crypto_evict_key(struct blk_crypto_profile *profile,
| ^~~~~~~~~~~~~~~~~~~~~~
Cc: Eric Biggers <ebiggers@google.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221123172923.434339-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christoph Hellwig [Thu, 4 May 2023 03:54:13 +0000 (20:54 -0700)]
blk-crypto: move internal only declarations to blk-crypto-internal.h
commit
3569788c08235c6f3e9e6ca724b2df44787ff487 upstream.
blk_crypto_get_keyslot, blk_crypto_put_keyslot, __blk_crypto_evict_key
and __blk_crypto_cfg_supported are only used internally by the
blk-crypto code, so move the out of blk-crypto-profile.h, which is
included by drivers that supply blk-crypto functionality.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221114042944.1009870-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christoph Hellwig [Thu, 4 May 2023 03:54:12 +0000 (20:54 -0700)]
blk-crypto: add a blk_crypto_config_supported_natively helper
commit
6715c98b6cf003f26b1b2f655393134e9d999a05 upstream.
Add a blk_crypto_config_supported_natively helper that wraps
__blk_crypto_cfg_supported to retrieve the crypto_profile from the
request queue. With this fscrypt can stop including
blk-crypto-profile.h and rely on the public consumer interface in
blk-crypto.h.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221114042944.1009870-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christoph Hellwig [Thu, 4 May 2023 03:54:11 +0000 (20:54 -0700)]
blk-crypto: don't use struct request_queue for public interfaces
commit
fce3caea0f241f5d34855c82c399d5e0e2d91f07 upstream.
Switch all public blk-crypto interfaces to use struct block_device
arguments to specify the device they operate on instead of th
request_queue, which is a block layer implementation detail.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221114042944.1009870-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chengming Zhou [Thu, 13 Apr 2023 06:28:04 +0000 (14:28 +0800)]
blk-stat: fix QUEUE_FLAG_STATS clear
commit
20de765f6d9da0c47b756429c60b41063b990a10 upstream.
We need to set QUEUE_FLAG_STATS for two cases:
1. blk_stat_enable_accounting()
2. blk_stat_add_callback()
So we should clear it only when ((q->stats->accounting == 0) &&
list_empty(&q->stats->callbacks)).
blk_stat_disable_accounting() only check if q->stats->accounting
is 0 before clear the flag, this patch fix it.
Also add list_empty(&q->stats->callbacks)) check when enable, or
the flag is already set.
The bug can be reproduced on kernel without BLK_DEV_THROTTLING
(since it unconditionally enable accounting, see the next patch).
# cat /sys/block/sr0/queue/scheduler
none mq-deadline [bfq]
# cat /sys/kernel/debug/block/sr0/state
SAME_COMP|IO_STAT|INIT_DONE|STATS|REGISTERED|NOWAIT|30
# echo none > /sys/block/sr0/queue/scheduler
# cat /sys/kernel/debug/block/sr0/state
SAME_COMP|IO_STAT|INIT_DONE|REGISTERED|NOWAIT
# cat /sys/block/sr0/queue/wbt_lat_usec
75000
We can see that after changing elevator from "bfq" to "none",
"STATS" flag is lost even though WBT callback still need it.
Fixes:
68497092bde9 ("block: make queue stat accounting a reference")
Cc: <stable@vger.kernel.org> # v5.17+
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230413062805.2081970-1-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ricardo Ribalda [Thu, 23 Mar 2023 22:44:20 +0000 (23:44 +0100)]
media: ov8856: Do not check for for module version
commit
5a4e1b5aed2a36a10d6a3b30fafb6b3bf41c3186 upstream.
It the device is probed in non-zero ACPI D state, the module
identification is delayed until the first streamon.
The module identification has two parts: deviceID and version. To rea
the version we have to enable OTP read. This cannot be done during
streamon, becase it modifies REG_MODE_SELECT.
Since the driver has the same behaviour for all the module versions, do
not read the module version from the sensor's OTP.
Cc: stable@vger.kernel.org
Fixes:
0e014f1a8d54 ("media: ov8856: support device probe in non-zero ACPI D state")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Gleixner [Mon, 17 Apr 2023 13:37:55 +0000 (15:37 +0200)]
posix-cpu-timers: Implement the missing timer_wait_running callback
commit
f7abf14f0001a5a47539d9f60bbdca649e43536b upstream.
For some unknown reason the introduction of the timer_wait_running callback
missed to fixup posix CPU timers, which went unnoticed for almost four years.
Marco reported recently that the WARN_ON() in timer_wait_running()
triggers with a posix CPU timer test case.
Posix CPU timers have two execution models for expiring timers depending on
CONFIG_POSIX_CPU_TIMERS_TASK_WORK:
1) If not enabled, the expiry happens in hard interrupt context so
spin waiting on the remote CPU is reasonably time bound.
Implement an empty stub function for that case.
2) If enabled, the expiry happens in task work before returning to user
space or guest mode. The expired timers are marked as firing and moved
from the timer queue to a local list head with sighand lock held. Once
the timers are moved, sighand lock is dropped and the expiry happens in
fully preemptible context. That means the expiring task can be scheduled
out, migrated, interrupted etc. So spin waiting on it is more than
suboptimal.
The timer wheel has a timer_wait_running() mechanism for RT, which uses
a per CPU timer-base expiry lock which is held by the expiry code and the
task waiting for the timer function to complete blocks on that lock.
This does not work in the same way for posix CPU timers as there is no
timer base and expiry for process wide timers can run on any task
belonging to that process, but the concept of waiting on an expiry lock
can be used too in a slightly different way:
- Add a mutex to struct posix_cputimers_work. This struct is per task
and used to schedule the expiry task work from the timer interrupt.
- Add a task_struct pointer to struct cpu_timer which is used to store
a the task which runs the expiry. That's filled in when the task
moves the expired timers to the local expiry list. That's not
affecting the size of the k_itimer union as there are bigger union
members already
- Let the task take the expiry mutex around the expiry function
- Let the waiter acquire a task reference with rcu_read_lock() held and
block on the expiry mutex
This avoids spin-waiting on a task which might not even be on a CPU and
works nicely for RT too.
Fixes:
ec8f954a40da ("posix-timers: Use a callback for cancel synchronization on PREEMPT_RT")
Reported-by: Marco Elver <elver@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Marco Elver <elver@google.com>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87zg764ojw.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jarkko Sakkinen [Sun, 23 Apr 2023 15:49:58 +0000 (18:49 +0300)]
tpm: Add !tpm_amd_is_rng_defective() to the hwrng_unregister() call site
commit
bd8621ca1510e6e802df9855bdc35a04a3cfa932 upstream.
The following crash was reported:
[ 1950.279393] list_del corruption,
ffff99560d485790->next is NULL
[ 1950.279400] ------------[ cut here ]------------
[ 1950.279401] kernel BUG at lib/list_debug.c:49!
[ 1950.279405] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 1950.279407] CPU: 11 PID: 5886 Comm: modprobe Tainted: G O 6.2.8_1 #1
[ 1950.279409] Hardware name: Gigabyte Technology Co., Ltd. B550M AORUS PRO-P/B550M AORUS PRO-P,
BIOS F15c 05/11/2022
[ 1950.279410] RIP: 0010:__list_del_entry_valid+0x59/0xc0
[ 1950.279415] Code: 48 8b 01 48 39 f8 75 5a 48 8b 72 08 48 39 c6 75 65 b8 01 00 00 00 c3 cc cc cc
cc 48 89 fe 48 c7 c7 08 a8 13 9e e8 b7 0a bc ff <0f> 0b 48 89 fe 48 c7 c7 38 a8 13 9e e8 a6 0a bc
ff 0f 0b 48 89 fe
[ 1950.279416] RSP: 0018:
ffffa96d05647e08 EFLAGS:
00010246
[ 1950.279418] RAX:
0000000000000033 RBX:
ffff99560d485750 RCX:
0000000000000000
[ 1950.279419] RDX:
0000000000000000 RSI:
ffffffff9e107c59 RDI:
00000000ffffffff
[ 1950.279420] RBP:
ffffffffc19c5168 R08:
0000000000000000 R09:
ffffa96d05647cc8
[ 1950.279421] R10:
0000000000000003 R11:
ffffffff9ea2a568 R12:
0000000000000000
[ 1950.279422] R13:
ffff99560140a2e0 R14:
ffff99560127d2e0 R15:
0000000000000000
[ 1950.279422] FS:
00007f67da795380(0000) GS:
ffff995d1f0c0000(0000) knlGS:
0000000000000000
[ 1950.279424] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 1950.279424] CR2:
00007f67da7e65c0 CR3:
00000001feed2000 CR4:
0000000000750ee0
[ 1950.279426] PKRU:
55555554
[ 1950.279426] Call Trace:
[ 1950.279428] <TASK>
[ 1950.279430] hwrng_unregister+0x28/0xe0 [rng_core]
[ 1950.279436] tpm_chip_unregister+0xd5/0xf0 [tpm]
Add the forgotten !tpm_amd_is_rng_defective() invariant to the
hwrng_unregister() call site inside tpm_chip_unregister().
Cc: stable@vger.kernel.org
Reported-by: Martin Dimov <martin@dmarto.com>
Link: https://lore.kernel.org/linux-integrity/3d1d7e9dbfb8c96125bc93b6b58b90a7@dmarto.com/
Fixes:
f1324bbc4011 ("tpm: disable hwrng for fTPM on some AMD designs")
Fixes:
b006c439d58d ("hwrng: core - start hwrng kthread also for untrusted sources")
Tested-by: Martin Dimov <martin@dmarto.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Packham [Tue, 18 Apr 2023 23:36:55 +0000 (11:36 +1200)]
hwmon: (adt7475) Use device_property APIs when configuring polarity
commit
2a8e41ad337508fc5d598c0f9288890214f8e318 upstream.
On DT unaware platforms of_property_read_u32_array() returns -ENOSYS
which wasn't handled by the code treating adi,pwm-active-state as
optional. Update the code to use device_property_read_u32_array() which
deals gracefully with DT unaware platforms.
Fixes:
86da28eed4fb ("hwmon: (adt7475) Add support for inverting pwm output")
Reported-by: Mariusz Białończyk <manio@skyboo.net>
Link: https://lore.kernel.org/linux-hwmon/52e26a67-9131-2dc0-40cb-db5c07370027@alliedtelesis.co.nz/T/#mdd0505801e0a4e72340de009a47c0fca4f771ed3
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20230418233656.869055-2-chris.packham@alliedtelesis.co.nz
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Babu Moger [Thu, 13 Apr 2023 21:39:58 +0000 (16:39 -0500)]
hwmon: (k10temp) Check range scale when CUR_TEMP register is read-write
commit
0c072385348e3ac5229145644055d3e2afb5b3db upstream.
Spec says, when CUR_TEMP_TJ_SEL == 3 and CUR_TEMP_RANGE_SEL == 0,
it should use RangeUnadjusted is 0, which is (CurTmp*0.125 -49) C. The
CUR_TEMP register is read-write when CUR_TEMP_TJ_SEL == 3 (bit 17-16).
Add the check to detect it.
Sensors command's output before the patch.
$sensors
k10temp-pci-00c3
Adapter: PCI adapter
Tctl: +76.6°C <- Wrong value
Tccd1: +26.5°C
Tccd2: +27.5°C
Tccd3: +27.2°C
Tccd4: +27.5°C
Tccd5: +26.0°C
Tccd6: +26.2°C
Tccd7: +25.0°C
Tccd8: +26.5°C
Sensors command's output after the patch.
$sensors
k10temp-pci-00c3
Adapter: PCI adapter
Tctl: +28.8°C <- corrected value
Tccd1: +27.5°C
Tccd2: +28.5°C
Tccd3: +28.5°C
Tccd4: +28.5°C
Tccd5: +27.0°C
Tccd6: +27.5°C
Tccd7: +27.0°C
Tccd8: +27.5°C
Signed-off-by: Babu Moger <babu.moger@amd.com>
Fixes:
1b59788979ac ("hwmon: (k10temp) Add temperature offset for Ryzen 2700X")
Link: https://lore.kernel.org/r/20230413213958.847634-1-babu.moger@amd.com
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Tue, 4 Apr 2023 07:25:15 +0000 (09:25 +0200)]
USB: dwc3: fix runtime pm imbalance on unbind
commit
44d257e9012ee8040e41d224d0e5bfb5ef5427ea upstream.
Make sure to balance the runtime PM usage count on driver unbind by
adding back the pm_runtime_allow() call that had been erroneously
removed.
Fixes:
266d0493900a ("usb: dwc3: core: don't trigger runtime pm when remove driver")
Cc: stable@vger.kernel.org # 5.9
Cc: Li Jun <jun.li@nxp.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230404072524.19014-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Tue, 4 Apr 2023 07:25:14 +0000 (09:25 +0200)]
USB: dwc3: fix runtime pm imbalance on probe errors
commit
9a8ad10c9f2e0925ff26308ec6756b93fc2f4977 upstream.
Make sure not to suspend the device when probe fails to avoid disabling
clocks and phys multiple times.
Fixes:
328082376aea ("usb: dwc3: fix runtime PM in error path")
Cc: stable@vger.kernel.org # 4.8
Cc: Roger Quadros <rogerq@ti.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230404072524.19014-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wesley Cheng [Thu, 13 Apr 2023 19:57:40 +0000 (12:57 -0700)]
usb: dwc3: gadget: Stall and restart EP0 if host is unresponsive
commit
02435a739b81ae24aff5d6e930efef9458e2af3c upstream.
It was observed that there are hosts that may complete pending SETUP
transactions before the stop active transfers and controller halt occurs,
leading to lingering endxfer commands on DEPs on subsequent pullup/gadget
start iterations.
dwc3_gadget_ep_disable name=ep8in flags=0x3009 direction=1
dwc3_gadget_ep_disable name=ep4in flags=1 direction=1
dwc3_gadget_ep_disable name=ep3out flags=1 direction=0
usb_gadget_disconnect deactivated=0 connected=0 ret=0
The sequence shows that the USB gadget disconnect (dwc3_gadget_pullup(0))
routine completed successfully, allowing for the USB gadget to proceed with
a USB gadget connect. However, if this occurs the system runs into an
issue where:
BUG: spinlock already unlocked on CPU
spin_bug+0x0
dwc3_remove_requests+0x278
dwc3_ep0_out_start+0xb0
__dwc3_gadget_start+0x25c
This is due to the pending endxfers, leading to gadget start (w/o lock
held) to execute the remove requests, which will unlock the dwc3
spinlock as part of giveback.
To mitigate this, resolve the pending endxfers on the pullup disable
path by re-locating the SETUP phase check after stop active transfers, since
that is where the DWC3_EP_DELAY_STOP is potentially set. This also allows
for handling of a host that may be unresponsive by using the completion
timeout to trigger the stall and restart for EP0.
Fixes:
c96683798e27 ("usb: dwc3: ep0: Don't prepare beyond Setup stage")
Cc: stable@vger.kernel.org
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Link: https://lore.kernel.org/r/20230413195742.11821-2-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Badhri Jagan Sridharan [Fri, 7 Apr 2023 03:07:41 +0000 (03:07 +0000)]
usb: gadget: udc: core: Prevent redundant calls to pullup
commit
a3afbf5cc887fc3401f012fe629810998ed61859 upstream.
usb_gadget_connect calls gadget->ops->pullup without checking whether
gadget->connected was previously set. Make this symmetric to
usb_gadget_disconnect by returning early if gadget->connected is
already set.
Fixes:
5a1da544e572 ("usb: gadget: core: do not try to disconnect gadget if it is not connected")
Cc: stable@vger.kernel.org
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20230407030741.3163220-2-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Badhri Jagan Sridharan [Fri, 7 Apr 2023 03:07:40 +0000 (03:07 +0000)]
usb: gadget: udc: core: Invoke usb_gadget_connect only when started
commit
0db213ea8eed5534a5169e807f28103cbc9d23df upstream.
usb_udc_connect_control does not check to see if the udc has already
been started. This causes gadget->ops->pullup to be called through
usb_gadget_connect when invoked from usb_udc_vbus_handler even before
usb_gadget_udc_start is called. Guard this by checking for udc->started
in usb_udc_connect_control before invoking usb_gadget_connect.
Guarding udc->vbus, udc->started, gadget->connect, gadget->deactivate
related functions with connect_lock. usb_gadget_connect_locked,
usb_gadget_disconnect_locked, usb_udc_connect_control_locked,
usb_gadget_udc_start_locked, usb_gadget_udc_stop_locked are called with
this lock held as they can be simulataneously invoked from different code
paths.
Adding an additional check to make sure udc is started(udc->started)
before pullup callback is invoked.
Fixes:
628ef0d273a6 ("usb: udc: add usb_udc_vbus_handler")
Cc: stable@vger.kernel.org
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20230407030741.3163220-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Randy Dunlap [Fri, 24 Feb 2023 03:27:03 +0000 (19:27 -0800)]
IMA: allow/fix UML builds
commit
644f17412f5acf01a19af9d04a921937a2bc86c6 upstream.
UML supports HAS_IOMEM since
0bbadafdc49d (um: allow disabling
NO_IOMEM).
Current IMA build on UML fails on allmodconfig (with TCG_TPM=m):
ld: security/integrity/ima/ima_queue.o: in function `ima_add_template_entry':
ima_queue.c:(.text+0x2d9): undefined reference to `tpm_pcr_extend'
ld: security/integrity/ima/ima_init.o: in function `ima_init':
ima_init.c:(.init.text+0x43f): undefined reference to `tpm_default_chip'
ld: security/integrity/ima/ima_crypto.o: in function `ima_calc_boot_aggregate_tfm':
ima_crypto.c:(.text+0x1044): undefined reference to `tpm_pcr_read'
ld: ima_crypto.c:(.text+0x10d8): undefined reference to `tpm_pcr_read'
Modify the IMA Kconfig entry so that it selects TCG_TPM if HAS_IOMEM
is set, regardless of the UML Kconfig setting.
This updates TCG_TPM from =m to =y and fixes the linker errors.
Fixes:
f4a0391dfa91 ("ima: fix Kconfig dependencies")
Cc: Stable <stable@vger.kernel.org> # v5.14+
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-um@lists.infradead.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Baryshkov [Fri, 31 Mar 2023 15:12:49 +0000 (18:12 +0300)]
phy: qcom-qmp-pcie: sc8180x PCIe PHY has 2 lanes
commit
1db6b0a4246ce708b89f5136571130b9987741d1 upstream.
All PCIe PHYs on sc8180x platform have 2 lanes, so change the number of
lanes to 2.
Fixes:
f839f14e24f2 ("phy: qcom-qmp: Add sc8180x PCIe support")
Cc: stable@vger.kernel.org # 5.15
Sgned-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230331151250.4049-1-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Manivannan Sadhasivam [Thu, 16 Mar 2023 08:10:59 +0000 (13:40 +0530)]
PCI: qcom: Fix the incorrect register usage in v2.7.0 config
commit
2542e16c392508800f1d9037feee881a9c444951 upstream.
Qcom PCIe IP version v2.7.0 and its derivatives don't contain the
PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT register. Instead, they have the new
PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2 register. So fix the incorrect
register usage which is modifying a different register.
Also in this IP version, this register change doesn't depend on MSI
being enabled. So remove that check also.
Link: https://lore.kernel.org/r/20230316081117.14288-2-manivannan.sadhasivam@linaro.org
Fixes:
ed8cc3b1fc84 ("PCI: qcom: Add support for SDM845 PCIe controller")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: <stable@vger.kernel.org> # 5.6+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lukas Wunner [Tue, 11 Apr 2023 06:21:02 +0000 (08:21 +0200)]
PCI: pciehp: Fix AB-BA deadlock between reset_lock and device_lock
commit
f5eff5591b8f9c5effd25c92c758a127765f74c1 upstream.
In 2013, commits
2e35afaefe64 ("PCI: pciehp: Add reset_slot() method")
608c388122c7 ("PCI: Add slot reset option to pci_dev_reset()")
amended PCIe hotplug to mask Presence Detect Changed events during a
Secondary Bus Reset. The reset thus no longer causes gratuitous slot
bringdown and bringup.
However the commits neglected to serialize reset with code paths reading
slot registers. For instance, a slot bringup due to an earlier hotplug
event may see the Presence Detect State bit cleared during a concurrent
Secondary Bus Reset.
In 2018, commit
5b3f7b7d062b ("PCI: pciehp: Avoid slot access during reset")
retrofitted the missing locking. It introduced a reset_lock which
serializes a Secondary Bus Reset with other parts of pciehp.
Unfortunately the locking turns out to be overzealous: reset_lock is
held for the entire enumeration and de-enumeration of hotplugged devices,
including driver binding and unbinding.
Driver binding and unbinding acquires device_lock while the reset_lock
of the ancestral hotplug port is held. A concurrent Secondary Bus Reset
acquires the ancestral reset_lock while already holding the device_lock.
The asymmetric locking order in the two code paths can lead to AB-BA
deadlocks.
Michael Haeuptle reports such deadlocks on simultaneous hot-removal and
vfio release (the latter implies a Secondary Bus Reset):
pciehp_ist() # down_read(reset_lock)
pciehp_handle_presence_or_link_change()
pciehp_disable_slot()
__pciehp_disable_slot()
remove_board()
pciehp_unconfigure_device()
pci_stop_and_remove_bus_device()
pci_stop_bus_device()
pci_stop_dev()
device_release_driver()
device_release_driver_internal()
__device_driver_lock() # device_lock()
SYS_munmap()
vfio_device_fops_release()
vfio_device_group_close()
vfio_device_close()
vfio_device_last_close()
vfio_pci_core_close_device()
vfio_pci_core_disable() # device_lock()
__pci_reset_function_locked()
pci_reset_bus_function()
pci_dev_reset_slot_function()
pci_reset_hotplug_slot()
pciehp_reset_slot() # down_write(reset_lock)
Ian May reports the same deadlock on simultaneous hot-removal and an
AER-induced Secondary Bus Reset:
aer_recover_work_func()
pcie_do_recovery()
aer_root_reset()
pci_bus_error_reset()
pci_slot_reset()
pci_slot_lock() # device_lock()
pci_reset_hotplug_slot()
pciehp_reset_slot() # down_write(reset_lock)
Fix by releasing the reset_lock during driver binding and unbinding,
thereby splitting and shrinking the critical section.
Driver binding and unbinding is protected by the device_lock() and thus
serialized with a Secondary Bus Reset. There's no need to additionally
protect it with the reset_lock. However, pciehp does not bind and
unbind devices directly, but rather invokes PCI core functions which
also perform certain enumeration and de-enumeration steps.
The reset_lock's purpose is to protect slot registers, not enumeration
and de-enumeration of hotplugged devices. That would arguably be the
job of the PCI core, not the PCIe hotplug driver. After all, an
AER-induced Secondary Bus Reset may as well happen during boot-time
enumeration of the PCI hierarchy and there's no locking to prevent that
either.
Exempting *de-enumeration* from the reset_lock is relatively harmless:
A concurrent Secondary Bus Reset may foil config space accesses such as
PME interrupt disablement. But if the device is physically gone, those
accesses are pointless anyway. If the device is physically present and
only logically removed through an Attention Button press or the sysfs
"power" attribute, PME interrupts as well as DMA cannot come through
because pciehp_unconfigure_device() disables INTx and Bus Master bits.
That's still protected by the reset_lock in the present commit.
Exempting *enumeration* from the reset_lock also has limited impact:
The exempted call to pci_bus_add_device() may perform device accesses
through pcibios_bus_add_device() and pci_fixup_device() which are now
no longer protected from a concurrent Secondary Bus Reset. Otherwise
there should be no impact.
In essence, the present commit seeks to fix the AB-BA deadlocks while
still retaining a best-effort reset protection for enumeration and
de-enumeration of hotplugged devices -- until a general solution is
implemented in the PCI core.
Link: https://lore.kernel.org/linux-pci/CS1PR8401MB0728FC6FDAB8A35C22BD90EC95F10@CS1PR8401MB0728.NAMPRD84.PROD.OUTLOOK.COM
Link: https://lore.kernel.org/linux-pci/20200615143250.438252-1-ian.may@canonical.com
Link: https://lore.kernel.org/linux-pci/ce878dab-c0c4-5bd0-a725-9805a075682d@amd.com
Link: https://lore.kernel.org/linux-pci/ed831249-384a-6d35-0831-70af191e9bce@huawei.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215590
Fixes:
5b3f7b7d062b ("PCI: pciehp: Avoid slot access during reset")
Link: https://lore.kernel.org/r/fef2b2e9edf245c049a8c5b94743c0f74ff5008a.1681191902.git.lukas@wunner.de
Reported-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Reported-by: Ian May <ian.may@canonical.com>
Reported-by: Andrey Grodzovsky <andrey2805@gmail.com>
Reported-by: Rahul Kumar <rahul.kumar1@amd.com>
Reported-by: Jialin Zhang <zhangjialin11@huawei.com>
Tested-by: Anatoli Antonovitch <Anatoli.Antonovitch@amd.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v4.19+
Cc: Dan Stein <dstein@hpe.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Alex Michon <amichon@kalrayinc.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Josh Triplett [Mon, 14 Nov 2022 07:23:26 +0000 (23:23 -0800)]
PCI: kirin: Select REGMAP_MMIO
commit
3a2776e8a0e156a61f5b59ae341d8fffc730b962 upstream.
pcie-kirin uses regmaps, and needs to pull them in; otherwise, with
CONFIG_PCIE_KIRIN=y and without CONFIG_REGMAP_MMIO pcie-kirin produces
a linker failure looking for __devm_regmap_init_mmio_clk().
Fixes:
d19afe7be126 ("PCI: kirin: Use regmap for APB registers")
Link: https://lore.kernel.org/r/04636141da1d6d592174eefb56760511468d035d.1668410580.git.josh@joshtriplett.org
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
[lpieralisi@kernel.org: commit log and removed REGMAP select]
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: stable@vger.kernel.org # 5.16+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicholas Piggin [Fri, 7 Apr 2023 04:09:09 +0000 (14:09 +1000)]
powerpc/boot: Fix boot wrapper code generation with CONFIG_POWER10_CPU
commit
648a1783fe2551f5a091c9a5f8f463cb2cbf8745 upstream.
-mcpu=power10 will generate prefixed and pcrel code by default, which
we do not support. The general kernel disables these with cflags, but
those were missed for the boot wrapper.
Fixes:
4b2a9315f20d ("powerpc/64s: POWER10 CPU Kconfig build option")
Cc: stable@vger.kernel.org # v6.1+
Reported-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230407040909.230998-1-npiggin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ard Biesheuvel [Mon, 9 Jan 2023 17:48:00 +0000 (18:48 +0100)]
arm64: Stash shadow stack pointer in the task struct on interrupt
commit
59b37fe52f49955791a460752c37145f1afdcad1 upstream.
Instead of reloading the shadow call stack pointer from the ordinary
stack, which may be vulnerable to the kind of gadget based attacks
shadow call stacks were designed to prevent, let's store a task's shadow
call stack pointer in the task struct when switching to the shadow IRQ
stack.
Given that currently, the task_struct::scs_sp field is only used to
preserve the shadow call stack pointer while a task is scheduled out or
running in user space, reusing this field to preserve and restore it
while running off the IRQ stack must be safe, as those occurrences are
guaranteed to never overlap. (The stack switching logic only switches
stacks when running from the task stack, and so the value being saved
here always corresponds to the task mode shadow stack)
While at it, fold a mov/add/mov sequence into a single add.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230109174800.3286265-3-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ard Biesheuvel [Mon, 9 Jan 2023 17:47:59 +0000 (18:47 +0100)]
arm64: Always load shadow stack pointer directly from the task struct
commit
2198d07c509f1db4a1185d1f65aaada794c6ea59 upstream.
All occurrences of the scs_load macro load the value of the shadow call
stack pointer from the task which is current at that point. So instead
of taking a task struct register argument in the scs_load macro to
specify the task struct to load from, let's always reference the current
task directly. This should make it much harder to exploit any
instruction sequences reloading the shadow call stack pointer register
from memory.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230109174800.3286265-2-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Syed Saba Kareem [Fri, 31 Mar 2023 05:20:23 +0000 (10:50 +0530)]
ASoC: amd: ps: update the acp clock source.
commit
a4d432e9132c0b29d857b09ca2ec4c1f455b5948 upstream.
Updating the clock source from ACLK to default clock
Signed-off-by: Syed Saba Kareem <Syed.SabaKareem@amd.com>
Link: https://lore.kernel.org/r/20230331052102.2211115-1-Syed.SabaKareem@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
syed saba kareem [Fri, 4 Nov 2022 12:09:07 +0000 (17:39 +0530)]
ASoC: amd: fix ACP version typo mistake
commit
4b19211435950a78af032c26ad64a5268e6012be upstream.
Pink Sardine is based on ACP6.3 architecture.
This patch fixes the typo mistake acp6.2 -> acp6.3
Signed-off-by: syed saba kareem <syed.sabakareem@amd.com>
Link: https://lore.kernel.org/r/20221104121001.207992-1-Syed.SabaKareem@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / platform / kernel / linux-starfive.git / log