Andre Przywara [Sat, 14 Jan 2017 02:06:10 +0000 (02:06 +0000)]
sunxi: OrangePi Zero: defconfig: enable SPI flash
Newer OrangePi Zero boards all come with 16 Mib SPI flash soldered, from
which the board can actually boot from.
Enable the SPL support for the SPI controller and SPI flash to allow
putting the SPL, the DT and U-Boot proper into there. This will let
a board boot without an SD card inserted.
The flash chip can be written with a version of the sunxi-fel tool.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Priit Laes <plaes@plaes.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
Andre Przywara [Sat, 14 Jan 2017 02:06:09 +0000 (02:06 +0000)]
sunxi: dts: OrangePi Zero: add Ethernet node
The OrangePi Zero can happily use the EMAC along with its integrated
PHY to use Ethernet (for TFTP booting, for instance).
Add the emac node to the board .dts by copying it from the OrangePi One
DT.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
Icenowy Zheng [Fri, 16 Dec 2016 14:35:02 +0000 (22:35 +0800)]
sunxi: add orangepi zero defconfig
Orange Pi Zero is a board designed by Xunlong. It has an Allwinner H2+
SoC (similar to H3, which shares the same SoC ID), 256MB/512MB RAM,
Allwinner XR819 SDIO Wi-Fi, a MicroUSB port which is used to power the
board (also capable of OTG), a USB Type-A socket and a MicroSD slot.
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Reviewed-by: Jagan Teki <jagan@openedev.com>
Icenowy Zheng [Fri, 16 Dec 2016 14:35:01 +0000 (22:35 +0800)]
sunxi: add proper device tree for Orange Pi Zero boards
Add a proper device tree file for Orange Pi Zero boards from Xunlong,
which come with a Allwinner H2+ SoC (similar to H3).
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Reviewed-by: Jagan Teki <jagan@openedev.com>
Jelle van der Waa [Mon, 5 Dec 2016 18:47:21 +0000 (19:47 +0100)]
sunxi: enable H3 EMAC for the nanopi neo
The nanopi already had the CONFIG_SUN8I_EMAC=y enabled in it's defconfig
file, but was missing the &emac the device tree entry.
Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
Tom Rini [Sat, 14 Jan 2017 17:20:23 +0000 (12:20 -0500)]
Kconfig: CONFIG_OF_PLATDATA doesn't really exist
There is no CONFIG_OF_PLATDATA, only CONFIG_SPL_OF_PLATDATA, so rename
the two references to CONFIG_OF_PLATDATA to CONFIG_SPL_OF_PLATDATA.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Tue, 10 Jan 2017 22:22:08 +0000 (17:22 -0500)]
arm: Re-sync asm/mach-types.h with Linux Kernel v4.9
This re-syncs the MACH_TYPE_xxx values from the Linux Kernel v4.9
release. In addition this removes all of the machine_arch_type and
machine_is_xxx logic that is unused in U-Boot. This removal removes a
large number of otherwise unused CONFIG values from the list to be
converted.
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Tested-by: Adam Ford <aford173@gmail.com>
Tom Rini [Tue, 10 Jan 2017 22:22:07 +0000 (17:22 -0500)]
arm: Remove unregister MACH_TYPE_xxx uses
Before we can sync with the latest mach-types.h file from the Linux
Kernel we need to remove some instances of MACH_TYPE_xxx from our
sources. As these values have been removed from the canonical upstream
source we should not be using them either, so drop.
Cc: Tom Warren <twarren@nvidia.com>
Cc: Lucas Stach <dev@lynxeye.de>
Cc: Luka Perkov <luka@openwrt.org>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Heiko Schocher <hs@denx.de>
Cc: Thomas Weber <weber@corscience.de>
Cc: Lucile Quirion <lucile.quirion@savoirfairelinux.com>
Cc: Matthias Weisser <weisserm@arcor.de>
Cc: Suriyan Ramasami <suriyan.r@gmail.com>
Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Cc: Bo Shen <voice.shen@atmel.com>
Cc: Nick Thompson <nick.thompson@gefanuc.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Erik van Luijk <evanluijk@interact.nl>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Tue, 10 Jan 2017 22:22:06 +0000 (17:22 -0500)]
omap3_igep00x0: Rework MACH_TYPE and status LED logic slightly
The MACH_TYPE for IGEP0032 was never officially used and has been
removed from upstream, so we must not use it. In order to remove this
we need to rework the status LED logic.
Cc: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Tom Rini [Tue, 10 Jan 2017 22:22:05 +0000 (17:22 -0500)]
omap3_logic: Rework MACH_TYPE and fdtfile logic
The MACH_TYPE values for the omap37xx based platforms are no longer
officially valid, so we must not set and pass them. In order to not
reference them but still be able to set the default fdtfile based on the
board detection logic we need to combine the two steps into one.
Cc: Adam Ford <aford173@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Adam Ford <aford173@gmail.com>
Tom Rini [Sat, 14 Jan 2017 17:16:43 +0000 (12:16 -0500)]
Merge git://git.denx.de/u-boot-fdt
Andreas Färber [Mon, 9 Jan 2017 15:08:02 +0000 (16:08 +0100)]
cmd/fdt: Make fdt get value endian-safe for single-cell properties
On a Raspberry Pi 2 disagreements on cell endianness can be observed:
U-Boot> fdt print /soc/gpio@
7e200000 phandle
phandle = <0x0000000d>
U-Boot> fdt get value myvar /soc/gpio@
7e200000 phandle; printenv myvar
myvar=0x0D000000
Fix this by always treating the pointer as BE and converting it in
fdt_value_setenv(), like its counterpart fdt_parse_prop() already does.
Consistently use fdt32_t, fdt32_to_cpu() and cpu_to_fdt32().
Fixes: bc80295 ("fdt: Add get commands to fdt")
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Gerald Van Baren <gvb@unssw.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Simon Glass <sjg@chromium.org>
Stefan Agner [Tue, 20 Dec 2016 14:58:45 +0000 (15:58 +0100)]
cmd: fdt: Print error message when fdt application fails
There are lots of reason why a FDT application might fail, the
error code might give an indication. Let the error code translate
in a error string so users can try to understand what went wrong.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Simon Glass <sjg@chromium.org>
David Gibson [Tue, 20 Dec 2016 14:58:44 +0000 (15:58 +0100)]
libfdt: Correct fdt handling of overlays without fixups and base trees without symbols
The fdt_overlay_apply() function purports to support the edge cases where
an overlay has no fixups to be applied, or a base tree which has no
symbols (the latter can only work if the former is also true). However it
gets it wrong in a couple of small ways:
* In the no fixups case, it doesn't fail immediately, but will attempt
fdt_for_each_property_offset() giving -FDT_ERR_NOTFOUND as the node
offset, which will fail. Instead it should succeed immediately, since
there's nothing to do.
* In the case of no symbols, it again doesn't fail immediately. However
if there is an actual fixup it will fail with an unexpected error,
because -FDT_ERR_NOTFOUND is passed to fdt_getprop() when attempting to
look up the symbols. We should instead return -FDT_ERR_NOTFOUND
directly.
Both of these errors lead to the code returning misleading error codes in
failing cases.
[ DTC commit:
7d8ef6e1db9794f72805a0855f4f7f12fadd03d3 ]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tom Rini [Fri, 13 Jan 2017 14:17:21 +0000 (09:17 -0500)]
Merge branch 'master' of git.denx.de/u-boot-mmc
Masahiro Yamada [Thu, 12 Jan 2017 03:16:15 +0000 (12:16 +0900)]
mmc: sunxi: revive depends on UART0_PORT_F
Commit
f401e907fcbc ("ARM: sunxi: remove bare default for
CONFIG_MMC") dropped "depends on UART0_PORT_F", but it is still
needed. Revive it as a prerequisite of CONFIG_MMC_SUNXI.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Masahiro Yamada [Fri, 13 Jan 2017 03:13:48 +0000 (12:13 +0900)]
mmc: pic32_sdhci: rename {pci->pic}32_sdhci_get_cd
I suspect this is a typo.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Fri, 13 Jan 2017 02:51:51 +0000 (11:51 +0900)]
mmc: sdhci: fix NULL pointer access when host->ops is not set
Until recently, sdhci_ops was used only for overriding IO accessors.
(so, host->ops was not set by any drivers except bcm2835_sdhci.c)
Now, we have more optional callbacks, get_cd, set_control_reg, and
set_clock. However, the code
if (host->ops->get_cd)
host->ops->get_cd(host);
... expects host->ops is set for all drivers.
Commit
5e96217f0434 ("mmc: pic32_sdhci: move the code to
pic32_sdhci.c") and commit
62226b68631b ("mmc: sdhci: move the
callback function into sdhci_ops") added sdhci_ops for pic32_sdhci.c
and s5p_sdhci.c, but the other drivers still do not (need not) set
host->ops because all callbacks in sdhci_ops are optional.
host->ops must be checked to avoid the system crash caused by NULL
pointer access.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tom Rini [Fri, 13 Jan 2017 02:20:51 +0000 (21:20 -0500)]
Merge git://git.denx.de/u-boot-rockchip
Fabio Estevam [Thu, 15 Dec 2016 18:00:13 +0000 (16:00 -0200)]
cmd: mem: Use memcpy for 'cp' command
Simplify the 'cp' command implementation by using the memcpy() function,
which brings the additional benefit of performance gain for those who have
CONFIG_USE_ARCH_MEMCPY selected.
Tested on a mx6qsabreauto board where a 5x gain in performance is seen
when reading 10MB from the parallel NOR memory.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Sjoerd Simons [Wed, 11 Jan 2017 10:46:17 +0000 (11:46 +0100)]
rockchip: Drop Ethernet from the TODO
Now that ethernet support works, it can be dropped from the rockchip
TODO
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Acked-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Romain Perier [Wed, 11 Jan 2017 10:46:16 +0000 (11:46 +0100)]
rockchip: Enable ETH address randomization for the rock2
This commit enables ethernet MAC address randomization on the rock2. It
removes the error at startup 'ethernet@
ff290000 address not set'.
Signed-off-by: Romain Perier <romain.perier@collabora.com>
Sjoerd Simons [Wed, 11 Jan 2017 10:46:15 +0000 (11:46 +0100)]
rockchip: Add PXE and DHCP to the default boot targets
Now that at least on the firefly board we have network support, enable
PXE and DHCP boot targets by default.
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Acked-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Romain Perier [Wed, 11 Jan 2017 10:46:14 +0000 (11:46 +0100)]
Enable DISTRO_DEFAULTS for Rockchip platforms
This enables suitable commands needed for booting general purpose
Linux distribution. This is required for example if we want to use PXE
or DHCP as default boot targets, symbols no longer enabled by
config_distro_defaults.h .
Signed-off-by: Romain Perier <romain.perier@collabora.com>
Simon Glass [Wed, 11 Jan 2017 10:46:13 +0000 (11:46 +0100)]
rockchip: evb-rk3339: Enable DHCP
This is the only RK3399 device without DHCP. Enable it so that we
can use a common BOOT_TARGET_DEVICES setting. It is likely useful to be
able to use USB networking, at least. Full networking can be enabled when
a suitable platform needs it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Sjoerd Simons [Wed, 11 Jan 2017 10:46:12 +0000 (11:46 +0100)]
rockchip: Enable networking support on rock2 and firefly
Enable the various configuration option required to get the ethernet
interface up and running on Radxa Rock2 and Firefly.
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Romain Perier <romain.perier@collabora.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Sjoerd Simons [Wed, 11 Jan 2017 10:46:11 +0000 (11:46 +0100)]
net: gmac_rockchip: Add Rockchip GMAC driver
Add a new driver for the GMAC ethernet interface present in Rockchip
RK3288 SOCs. This driver subclasses the generic design-ware driver to
add the glue needed specifically for Rockchip.
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Romain Perier <romain.perier@collabora.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Simon Glass [Wed, 11 Jan 2017 10:46:10 +0000 (11:46 +0100)]
net: designware: Export the operation functions
Export all functions so that drivers can use them, or not, as the need
arises.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Romain Perier <romain.perier@collabora.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Simon Glass [Wed, 11 Jan 2017 10:46:09 +0000 (11:46 +0100)]
net: designware: Split the link init into a separate function
With rockchip we need to make adjustments after the link speed is set but
before enabling received/transmit. In preparation for this, split these
two pieces into separate functions.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Romain Perier <romain.perier@collabora.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Simon Glass [Wed, 11 Jan 2017 10:46:08 +0000 (11:46 +0100)]
net: designware: Adjust dw_adjust_link() to return an error
This function can fail, so return the error if there is one.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Romain Perier <romain.perier@collabora.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Sjoerd Simons [Wed, 11 Jan 2017 10:46:07 +0000 (11:46 +0100)]
net: designware: Export various functions/struct to allow subclassing
To allow other DM drivers to subclass the designware driver various
functions and structures need to be exported. Export these.
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Romain Perier <romain.perier@collabora.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Nickey Yang Nickey Yang [Thu, 29 Dec 2016 06:01:26 +0000 (14:01 +0800)]
rockchip: video: fix mpixelclock in rockchip HDMI
Correct mpixelclock errors in rockchip_phy_config[] and rockchip_mpll_cfg[].
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
Nickey Yang Nickey Yang [Thu, 29 Dec 2016 02:47:30 +0000 (10:47 +0800)]
rockchip: rk3288: set isp/vop qos priority level
Isp-camera preview image will be broken when dual screen display mode.
This patch set isp/vop qos level higher to solve this problem.
We have verified this patch on rk3288-miniarm board.
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
Kever Yang [Wed, 28 Dec 2016 09:48:26 +0000 (17:48 +0800)]
arm64: rk3399: update rockchip_get_cru API
rk3399 has two clock-controller: cru and pmucru, update the
rockchip_get_crui() API, and rockchip_get_clk() do not used for
other module.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Kever Yang [Wed, 28 Dec 2016 03:32:36 +0000 (11:32 +0800)]
dts: arm64: rk3399: add max-frequency for sdhci
Add 'max-frequency' for sdhci node for clock init.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Kever Yang [Wed, 28 Dec 2016 03:32:35 +0000 (11:32 +0800)]
mmc: rockchip_sdhci: add clock init for mmc
Init the clock rate to max-frequency from dts with clock driver api.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Martin Michlmayr [Sun, 18 Dec 2016 01:40:26 +0000 (17:40 -0800)]
rockchip: Fix veyron-minnie's Kconfig description
The veyron-minnie Kconfig referred to jerry by mistake.
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Acked-by: Simon Glass <sjg@chromium.org>
Jacob Chen [Fri, 18 Nov 2016 07:54:26 +0000 (15:54 +0800)]
rockchip: configs: make rk3036 env config same as rk3288
To make rockchip soc keep the same partition map
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>
Jacob Chen [Fri, 18 Nov 2016 07:54:25 +0000 (15:54 +0800)]
rockchip: configs: correct env offset when enable CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
With CONFIG_ROCKCHIP_SPL_BACK_TO_BROM enabled,
the environment is inside u-boot.
So solve it by moving environment after u-boot.
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>
Kever Yang [Thu, 24 Nov 2016 07:29:52 +0000 (15:29 +0800)]
rockchip: dts: popmetal: add usb host power supply node
The popmetal board using a HOST_VBUS_DRV gpio signal to control the
USB host port 5V power, add a fix regulator and pinctrl for it, and
enable the USB host1 controller with the vbus-supply.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Added rockchip: tag:
Signed-off-by: Simon Glass <sjg@chromium.org>
Kever Yang [Thu, 24 Nov 2016 07:29:51 +0000 (15:29 +0800)]
rockchip: config: popmetal: enable the USB host controller and function
RK3288 using the dwc2 USB host controller, enable it and other usb host
funtion like storage and ether.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
Added rockchip: tag:
Signed-off-by: Simon Glass <sjg@chromium.org>
Kever Yang [Thu, 24 Nov 2016 07:29:50 +0000 (15:29 +0800)]
rockchip: board: popmetal: de-assert the host rst pin in board init
The PopMetal board have a on board FE1.1 usb 2.0 hub which connect to
the usb host port, we need to de-assert its reset pin to enable it.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
Added rockchip: tag:
Signed-off-by: Simon Glass <sjg@chromium.org>
Tom Rini [Wed, 11 Jan 2017 15:45:48 +0000 (10:45 -0500)]
SPL: Adjust more debug prints for ulong entry_point
With entry_point now being an unsigned long we need to adapt the last
two debug prints to use %lX not %X.
Fixes:
11e1479b9e67 ("SPL: make struct spl_image 64-bit safe")
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 11 Jan 2017 14:16:05 +0000 (09:16 -0500)]
power_i2c.c: Fix unused variable warning
The variable ret was added but never set as we did not make calls to
other functions that we needed to check the return value on.
Fixes:
505cf4750ae5 ("power: change from meaningless value to error number")
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 11 Jan 2017 13:04:26 +0000 (08:04 -0500)]
Merge tag 'xilinx-for-v2017.03' of git://denx.de/git/u-boot-microblaze
Xilinx changes for v2017.03
- ATF handoff
- DT syncups
- gem: Use wait_for_bit(), add simple clk support
- Simple clk driver for ZynqMP
- Other small changes
Masahiro Yamada [Tue, 10 Jan 2017 04:32:08 +0000 (13:32 +0900)]
ARM: sunxi: remove bare default for CONFIG_MMC
The bare default entry is wrong. Just remove it since the (real)
entry in drivers/mmc/Kconfig has "default ARM || PPC || SANDBOX".
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Masahiro Yamada [Tue, 10 Jan 2017 04:32:07 +0000 (13:32 +0900)]
mmc: move more driver config options to Kconfig
Move (and rename) the following CONFIG options to Kconfig:
CONFIG_DAVINCI_MMC (renamed to CONFIG_MMC_DAVINCI)
CONFIG_OMAP_HSMMC (renamed to CONFIG_MMC_OMAP_HS)
CONFIG_MXC_MMC (renamed to CONFIG_MMC_MXC)
CONFIG_MXS_MMC (renamed to CONFIG_MMC_MXS)
CONFIG_TEGRA_MMC (renamed to CONFIG_MMC_SDHCI_TEGRA)
CONFIG_SUNXI_MMC (renamed to CONFIG_MMC_SUNXI)
They are the same option names as used in Linux.
This commit was created as follows:
[1] Rename the options with the following command:
find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \
-type f -print | xargs sed -i -e '
s/CONFIG_DAVINCI_MMC/CONFIG_MMC_DAVINCI/g
s/CONFIG_OMAP_HSMMC/CONFIG_MMC_OMAP_HS/g
s/CONFIG_MXC_MMC/CONFIG_MMC_MXC/g
s/CONFIG_MXS_MMC/CONFIG_MMC_MXS/g
s/CONFIG_TEGRA_MMC/CONFIG_MMC_SDHCI_TEGRA/g
s/CONFIG_SUNXI_MMC/CONFIG_MMC_SUNXI/g
'
[2] Commit the changes
[3] Create entries in driver/mmc/Kconfig.
(copied from Linux)
[4] Move the options with the following command
tools/moveconfig.py -y -r HEAD \
MMC_DAVINCI MMC_OMAP_HS MMC_MXC MMC_MXS MMC_SDHCI_TEGRA MMC_SUNXI
[5] Sort and align drivers/mmc/Makefile for readability
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Masahiro Yamada [Tue, 10 Jan 2017 04:32:06 +0000 (13:32 +0900)]
ARM: davinci: remove unused CONFIG_DAVINCI_MMC_SD1
This CONFIG is not referenced from anywhere.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Masahiro Yamada [Tue, 10 Jan 2017 04:32:05 +0000 (13:32 +0900)]
mmc: move DesignWare-based drivers to Kconfig
Move (and rename) the following CONFIG options to Kconfig:
CONFIG_EXYNOS_DWMMC (renamed to CONFIG_MMC_DW_EXYNOS)
CONFIG_HIKEY_DWMMC (renamed to CONFIG_MMC_DW_K3)
CONFIG_SOCFPGA_DWMMC (renamed to CONFIG_MMC_DW_SOCFPGA)
The "HIKEY" is a board name, so it is not suitable for the MMC
controller name. I am following the name used in Linux.
This commit was generated as follows:
[1] Rename the config options with the following command:
find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \
-type f -print | xargs sed -i -e '
s/CONFIG_EXYNOS_DWMMC/CONFIG_MMC_DW_EXYNOS/g
s/CONFIG_HIKEY_DWMMC/CONFIG_MMC_DW_K3/g
s/CONFIG_SOCFPGA_DWMMC/CONFIG_MMC_DW_SOCFPGA/g
'
[2] Commit the changes
[3] Create the entries in drivers/mmc/Kconfig
(with default y for EXYNOS and SOCFPGA)
[4] Run the following:
tools/moveconfig.py -y -r HEAD MMC_DW_EXYNOS MMC_DW_K3 MMC_DW_SOCFPGA
[5] Sort and align drivers/mmc/Makefile for readability
[6] Clean-up doc/README.socfpga by hand
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Masahiro Yamada [Tue, 10 Jan 2017 04:32:04 +0000 (13:32 +0900)]
mmc: move CONFIG_DWMMC to Kconfig, renaming to CONFIG_MMC_DW
This commit was created as follows:
[1] Rename the option with the following command:
find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \
-type f -print | xargs sed -i -e 's/CONFIG_DWMMC/CONFIG_MMC_DW/g'
[2] create the entry for MMC_DW in drivers/mmc/Kconfig
(the prompt and help were copied from Linux)
[3] run "tools/moveconfig.py -y MMC_DW"
[4] add "depends on MMC_DW" to the MMC_DW_ROCKCHIP entry
[5] Clean-up doc/README.socfpga by hand
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Masahiro Yamada [Tue, 10 Jan 2017 04:32:03 +0000 (13:32 +0900)]
mmc: rename CONFIG_ROCKCHIP_DWMMC to CONFIG_MMC_DW_ROCKCHIP
I am trying to make all DesignWare-based driver options prefixed
with CONFIG_MMC_DW_.
This commit was generated as follows:
find . -name .git -prune -o -type f -print | \
xargs sed -i -e 's/ROCKCHIP_DWMMC/MMC_DW_ROCKCHIP/g'
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Masahiro Yamada [Tue, 10 Jan 2017 04:32:02 +0000 (13:32 +0900)]
ARM: socfpga: remove unused CONFIG option and cleanup README.socfpga
CONFIG_SOCFPGA_DWMMC_FIFO_DEPTH is defined in the socfpga_common.h,
but not referenced at all. Remove.
Also, clean-up the README.socfpga. CONFIG_MMC should not be defined
in the header since it was moved to Kconfig by commit
c27269953b94
("mmc: complete unfinished move of CONFIG_MMC"). I see no grep hit
for the others.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Jaehoon Chung [Thu, 15 Dec 2016 11:49:50 +0000 (20:49 +0900)]
power: change from meaningless value to error number
'-1' is absolutely meaningless value.
This patch changed from meaningless value to error number.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Masahiro Yamada [Fri, 30 Dec 2016 14:20:14 +0000 (23:20 +0900)]
mmc: uniphier-sd: fix Kconfig dependency
Some MMC drivers describe operations with the DM_MMC_OPS form, but
there are still several drivers with older implementation. We can
not compile drivers from different groups at the same time because
the core framework is shared with #ifdef CONFIG_DM_MMC_OPS.
Every driver should have "depends on DM_MMC_OPS" (or !DM_MMC_OPS)
explicitly to express which framework it is based on. This will
avoid enabling drivers with incompatible interface at the same time.
It is incorrect to make a driver "select DM_MMC_OPS".
While we are here, add "depends on OF_CONTROL" as well because this
driver can be configured only by Device Tree.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Fri, 30 Dec 2016 13:41:46 +0000 (22:41 +0900)]
mmc: sdhci-cadence: add Cadence SD4HC support
Add a driver for the Cadence SD4HC SD/SDIO/eMMC Controller.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Jaehoon Chung [Fri, 30 Dec 2016 06:30:21 +0000 (15:30 +0900)]
mmc: sdhci: combine the Host controller v3.0 feature into one condition
It doesn't need to seperate the condition.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Fri, 30 Dec 2016 06:30:20 +0000 (15:30 +0900)]
mmc: sdhci: remove the SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER
Ther is no usage anywhere. It doesn't need to maintain this bit.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Fri, 30 Dec 2016 06:30:19 +0000 (15:30 +0900)]
mmc: sdhci: use the bitops APIs in sdhci.h
The using the bitops is too easy controlling than now.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Fri, 30 Dec 2016 06:30:18 +0000 (15:30 +0900)]
mmc: sdhci: move the callback function into sdhci_ops
callback function should be moved into sdhci_ops struct.
Other controller can use these ops for controlling clock or their own
specific register.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Fri, 30 Dec 2016 06:30:17 +0000 (15:30 +0900)]
mmc: s5p_sdhci: add the s5p_set_clock function
Add the s5p_set_clock function.
It's not good that "set_mmc_clk" is assigned directly.
In future, it should be changed to use the clock framework.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Fri, 30 Dec 2016 06:30:16 +0000 (15:30 +0900)]
mmc: change the set_ios return type from void to int
To maintain consistency, set_ios type of legacy mmc_ops changed to int.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Fri, 30 Dec 2016 06:30:15 +0000 (15:30 +0900)]
mmc: sdhci: remove the SDHCI_QUIRK_NO_CD
This quirk doesn't need anymore.
It's replaced to get_cd callback function.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Fri, 30 Dec 2016 06:30:14 +0000 (15:30 +0900)]
mmc: pic32_sdhci: move the code to pic32_sdhci.c
This code is used for only pic32_sdhci controller.
To remove the "#ifdef", moves to pic32_sdhci.c.
And use the get_cd callback function.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Fri, 30 Dec 2016 06:30:13 +0000 (15:30 +0900)]
mmc: sdhci: remove the unused code about testing Card detect
This code is dead code..There is no usage anywhere.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Fri, 30 Dec 2016 06:30:12 +0000 (15:30 +0900)]
mmc: sdhci: add the get_cd callback function in sdhci_ops
Some SoCs can have their own card dect scheme.
Then they may use this get_cd callback function after implementing init
in their drivers.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Fri, 30 Dec 2016 06:30:11 +0000 (15:30 +0900)]
mmc: sdhci: disable the 8bit mode when host doesn't support it
Buswidth is depeneded on Hardware schematic.
Evne though host can support the 8bit buswidth, if hardware doesn't
support 8bit mode, it doesn't work fine.
So the buswidth mode selection leaves a matter in each SoC drivers.
On the contrary to this, hardware supports 8bit mode, but host doesn't
support it. then controller has to disable the MMC_MODE_8BIT.
(Host can check whether 8bit mode is supported or not, since V3.0)
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Michal Simek [Tue, 10 Jan 2017 12:47:52 +0000 (13:47 +0100)]
ARM64: zynqmp: Move CONFIG_AHCI from board file
Move configuration option from board file to defconfig.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Kamensky Ivan [Tue, 27 Dec 2016 16:12:23 +0000 (19:12 +0300)]
xilinx_phy: Pass correct pointer to fdtdec_get_int()
This patch fixes incorrect pointer on offset device in device tree blob.
When using with the component "Ethernet 1G/2.5G BASE-X PCS/PMA or SGMII"
it does not understand what type is XAE_PHY_TYPE_1000BASE_X and trying
to change frequency.
Signed-off-by: Kamensky Ivan <kamensky.ivan@mail.ru>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Tom Rini [Tue, 10 Jan 2017 13:19:33 +0000 (08:19 -0500)]
Merge git://git.denx.de/u-boot-dm
Tom Rini [Tue, 10 Jan 2017 13:13:55 +0000 (08:13 -0500)]
mips: Use common _AC macro now.
MIPS no longer needs to have its own version of this macro now.
Fixes:
2a6713b09b8d ("move UL() macro from armv8/mmu.h into common.h")
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Tue, 10 Jan 2017 13:19:21 +0000 (08:19 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-sunxi
Michal Simek [Mon, 9 Jan 2017 09:05:16 +0000 (10:05 +0100)]
ARM64: zynqmp: Generate handoff structure for ATF
Xilinx ATF extending options for passing images from BL2(FSBL)
to BL31. U-Boot SPL is FSBL replacement that's why it should generate
handoff structure the same. Support only one entry which is U-Boot in
EL2 itself. When FIT image is adopted structure generate should be data
driven.
Currently ATF is placing this structure at the beggining of OCM which is
rewriting early parts of ATF which should be unused at that time.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Fri, 6 Jan 2017 10:20:54 +0000 (11:20 +0100)]
fpga: Use enum for bitstream command types
Using enum simplify handling of different bitstream command
types.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Mike Looijmans [Tue, 3 Jan 2017 08:47:52 +0000 (09:47 +0100)]
ARM: zynqmp: Make SYS_VENDOR configurable
Add a string description for SYS_VENDOR to allow configuring boards from
other vendors than just "xilinx".
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Moritz Fischer [Thu, 22 Dec 2016 17:36:11 +0000 (09:36 -0800)]
ARM64: zynqmp: Fix i2c node's compatible string
The Zynq Ultrascale MP uses version 1.4 of the Cadence IP core
which fixes some silicon bugs that needed software workarounds
in Version 1.0 that was used on Zynq systems.
Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Heiko Schocher <hs@denx.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Moritz Fischer [Thu, 22 Dec 2016 17:36:10 +0000 (09:36 -0800)]
i2c: cdns: Add additional compatible string for r1p14 of the IP.
Adding additional compatible string for version 1.4 of the IP block.
Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Heiko Schocher <hs@denx.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Siva Durga Prasad Paladugu [Tue, 15 Nov 2016 10:45:42 +0000 (16:15 +0530)]
net: zynq_gem: Use clock driver for ZynqMP
Enable and use the clock driver routine
defined in clock driver toset required
clock appropriately.
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Siva Durga Prasad Paladugu [Tue, 15 Nov 2016 10:45:41 +0000 (16:15 +0530)]
clk: zynqmp: Add clock driver support for zynqmp
Add basic clock driver support for zynqmp which
sets the required clock for GEM controller
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Siva Durga Prasad Paladugu [Thu, 12 May 2016 05:24:41 +0000 (10:54 +0530)]
ARM64: zynqmp: Enable fastboot for first SD/MMC/EMMC device
DNL numbers are not changed that's why fastboot needs to be called with
-i parameter (Xilinx vendor id).
- Show available devices
sudo fastboot -i 0x03fd devices
xilinx_zynqmp_zcu100 fastboot
- Stop fastboot and go back to U-Boot prompt
sudo fastboot -i 0x03fd continue
- Reboot the board
sudo fastboot -i 0x03fd reboot
- Get internal variables
sudo fastboot -i 0x3fd getvar bootloader-version
bootloader-version: U-Boot 2016.07-00026-g19bd53044817
sudo fastboot -i 0x3fd getvar downloadsize
downloadsize: 0x06000000
sudo fastboot -i 0x3fd getvar version
version: 0.4
(regular variables needs to have fastboot. prefix - there is also
serialno variable which should be define as serial#)
- Format SD/MMC/EMMC card
sudo fastboot -i 0x3fd oem format
- Write images to boot and Linux partition
sudo fastboot -i 0x3fd flash boot sd.img
sudo fastboot -i 0x3fd flash Linux os.img
- Creating sd.img or os.img
$ dd if=/dev/zero of=sd.img bs=1024 count=1024
$ mkfs.vfat sd.img
$ mkdir sd-mount
$ mount -o loop sd.img sd-mount
$ echo foo > sd-mount/bar
$ umount sd-mount
partitions setting should be checked by running gpt command.
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Stefan Krsmanovic [Fri, 21 Oct 2016 10:44:56 +0000 (12:44 +0200)]
ARM64: zynqmp: Add idle state for ZynqMP
Added the idle-states node to describe zynqmp idle states. Only cpu-sleep-0
idle state is added in this patch. References to the idle-states node are
added in all CPU nodes. Time values: entry/exit latencies and min-residency,
needs to be tuned. arm,psci-suspend-param is selected to comply with PSCIv1.0
and Extended StateID format.
Signed-off-by: Stefan Krsmanovic <stefan.krsmanovic@aggios.com>
Acked-by: Will Wong <willw@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Tue, 5 Apr 2016 10:01:16 +0000 (12:01 +0200)]
ARM64: zynqmp: Fix usb nodes for dc1 and dc2
Fix DT binding for usb nodes. Setup correct aliases and enable dwc3
nodes.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Fri, 16 Dec 2016 12:08:55 +0000 (13:08 +0100)]
ARM64: zynqmp: Add missing earlycon for ep108
Just sync between version. Others zynqmp boards have this setup.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Shubhrajyoti Datta [Fri, 21 Oct 2016 10:42:19 +0000 (16:12 +0530)]
ARM64: zynqmp: clk: Add the clock for watchdog
The watchdog clock node is missing.
Add the same. This solves the below error.
cdns-wdt
fd4d0000.watchdog: input clock not found
cdns-wdt: probe of
fd4d0000.watchdog failed with error -2
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Sudeep Holla [Wed, 21 Oct 2015 10:10:16 +0000 (11:10 +0100)]
ARM: dts: zynq: replace gpio-key,wakeup with wakeup-source property
Though the keyboard driver for GPIO buttons(gpio-keys) will continue to
check for/support the legacy "gpio-key,wakeup" boolean property to
enable gpio buttons as wakeup source, "wakeup-source" is the new
standard binding.
This patch replaces the legacy "gpio-key,wakeup" with the unified
"wakeup-source" property in order to avoid any futher copy-paste
duplication.
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Fri, 16 Dec 2016 12:16:14 +0000 (13:16 +0100)]
ARM: zynq: Setup modeboot variable based on boot mode
modeboot variable is used for saving inforation which bootmode
is used.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Mon, 21 Nov 2016 09:43:37 +0000 (10:43 +0100)]
ARM: zynq: Remove spi-max-frequency
spi-max-frequency for spi bus depends on devices which are
connected to it. Remove this parameter from dtsi file.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Wed, 27 Jul 2016 12:44:30 +0000 (14:44 +0200)]
ARM: zynq: Remove CONFIG_BOOTP_SERVERIP
Do the same change which was done in ZynqMP by:
"ARM64: zynqmp: Remove CONFIG_BOOTP_SERVERIP"
(sha1:
a8b6a156c0f7fb99502229e454bc9c3b38645280)
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Fri, 16 Dec 2016 10:57:17 +0000 (11:57 +0100)]
ARM: zynq: Move CONFIG_SYS_TEXT_BASE to Kconfig
Enable CONFIG_SYS_TEXT_BASE via Kconfig.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Fri, 16 Dec 2016 09:01:45 +0000 (10:01 +0100)]
fpga: zynqmp: Remove empty functions
Xilinx core files will take care about it.
There is no need to have these functions because they do nothing.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Siva Durga Prasad Paladugu [Fri, 18 Nov 2016 04:57:48 +0000 (10:27 +0530)]
ARM64: zynqmp: Add support to save env to FAT
Add support to save environment as a file of FAT filesystem
on to SD card. The file will be saved with name uEnv.txt.
This environment will be retrieved during boot.
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Siva Durga Prasad Paladugu [Fri, 18 Nov 2016 04:57:47 +0000 (10:27 +0530)]
ARM64: zynqmp: Increase environment size to 32K
Increase environment size to 32K as the current default
environment itself is greater than 4K.
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Tue, 10 May 2016 11:11:19 +0000 (13:11 +0200)]
microblaze: Enable option to overwrite default variables
Enable overwriting variables out of main config file.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Fri, 16 Dec 2016 08:12:10 +0000 (09:12 +0100)]
microblaze: Remove hardcoded IP address from config
IP addresses shouldn't be hardcoded in board config.
This patch removes them.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Sai Pavan Boddu [Tue, 16 Aug 2016 11:42:05 +0000 (17:12 +0530)]
microblaze: Make the board configuration name user definable
Add a prompt for editing in menuconfig
Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Mon, 12 Dec 2016 08:47:26 +0000 (09:47 +0100)]
net: gem: Use wait_for_bit() instead of private mdio_wait()
Using generic wait_for_bit() implementation instead of
using private wait function.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Mon, 12 Dec 2016 08:46:09 +0000 (09:46 +0100)]
lib: Add WATCHDOG_RESET to wait_bit.h
wait_for_bit() is missing reset watchdog in case watchdog
is configured.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Michal Simek [Mon, 2 Jan 2017 08:40:09 +0000 (09:40 +0100)]
scsi: dm: Unbind all scsi based block devices before new scan
New scan should unbind all block devices not to be listed again.
Without this patch if scsi reset or scan is called new block devices are
created which point to the same id and lun.
For example:
ZynqMP> scsi scan
scsi_scan: if_type=2, devnum=0: sdhci@
ff170000.blk, 6, 0
scsi_scan: if_type=2, devnum=0: ahci@
fd0c0000.id1lun0, 2, 0
scsi_scan: if_type=2, devnum=0: ahci@
fd0c0000.id1lun0, 2, 1
scsi_scan: if_type=2, devnum=0: ahci@
fd0c0000.id1lun0, 2, 2
scsi_scan: if_type=2, devnum=0: ahci@
fd0c0000.id1lun0, 2, 3
scsi_scan: if_type=2, devnum=0: ahci@
fd0c0000.id1lun0, 2, 4
scanning bus for devices...
Device 0: (1:0) Vendor: ATA Prod.: KINGSTON SVP200S Rev: 501A
Type: Hard Disk
Capacity: 57241.8 MB = 55.9 GB (
117231408 x 512)
Reported-by: Ken Ma <make@marvell.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Simon Glass <sjg@chromium.org>
Mugunthan V N [Thu, 17 Nov 2016 09:08:15 +0000 (14:38 +0530)]
defconfig: am335x_evm: enable usb driver model
enable usb driver model for am335x bbb as musb supports
driver model
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Mugunthan V N [Thu, 17 Nov 2016 09:08:14 +0000 (14:38 +0530)]
am335x_evm: enable usb ether gadget as it supports DM_ETH
Since usb ether gadget have support for driver model, so enable
usb ether gadget.
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Mugunthan V N [Thu, 17 Nov 2016 09:08:13 +0000 (14:38 +0530)]
am33xx: board: init usb ether gadget for rndis support
Add usb ether gadget device with usb_ether_init() when
CONFIG_DM_ETH and CONFIG_USB_ETHER are defined.
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>