Ronald Wahl [Tue, 31 Oct 2023 13:12:42 +0000 (14:12 +0100)]
serial: 8250_omap: Add earlycon support for the AM654 UART controller
commit
8e42c301ce64e0dcca547626eb486877d502d336 upstream.
Currently there is no support for earlycon on the AM654 UART
controller. This commit adds it.
Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20231031131242.15516-1-rwahl@gmx.de
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ronald Wahl [Wed, 1 Nov 2023 17:14:31 +0000 (18:14 +0100)]
serial: 8250: 8250_omap: Do not start RX DMA on THRI interrupt
commit
c6bb057418876cdfdd29a6f7b8cef54539ee8811 upstream.
Starting RX DMA on THRI interrupt is too early because TX may not have
finished yet.
This change is inspired by commit
90b8596ac460 ("serial: 8250: Prevent
starting up DMA Rx on THRI interrupt") and fixes DMA issues I had with
an AM62 SoC that is using the 8250 OMAP variant.
Cc: stable@vger.kernel.org
Fixes:
c26389f998a8 ("serial: 8250: 8250_omap: Add DMA support for UARTs on K3 SoCs")
Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20231101171431.16495-1-rwahl@gmx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ronald Wahl [Tue, 31 Oct 2023 11:09:09 +0000 (12:09 +0100)]
serial: 8250: 8250_omap: Clear UART_HAS_RHR_IT_DIS bit
commit
8973ab7a2441b286218f4a5c4c33680e2f139996 upstream.
This fixes commit
439c7183e5b9 ("serial: 8250: 8250_omap: Disable RX
interrupt after DMA enable") which unfortunately set the
UART_HAS_RHR_IT_DIS bit in the UART_OMAP_IER2 register and never
cleared it.
Cc: stable@vger.kernel.org
Fixes:
439c7183e5b9 ("serial: 8250: 8250_omap: Disable RX interrupt after DMA enable")
Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20231031110909.11695-1-rwahl@gmx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Mack [Thu, 23 Nov 2023 07:28:18 +0000 (08:28 +0100)]
serial: sc16is7xx: address RX timeout interrupt errata
commit
08ce9a1b72e38cf44c300a44ac5858533eb3c860 upstream.
This device has a silicon bug that makes it report a timeout interrupt
but no data in the FIFO.
The datasheet states the following in the errata section 18.1.4:
"If the host reads the receive FIFO at the same time as a
time-out interrupt condition happens, the host might read 0xCC
(time-out) in the Interrupt Indication Register (IIR), but bit 0
of the Line Status Register (LSR) is not set (means there is no
data in the receive FIFO)."
The errata description seems to indicate it concerns only polled mode of
operation when reading bit 0 of the LSR register. However, tests have
shown and NXP has confirmed that the RXLVL register also yields 0 when
the bug is triggered, and hence the IRQ driven implementation in this
driver is equally affected.
This bug has hit us on production units and when it does, sc16is7xx_irq()
would spin forever because sc16is7xx_port_irq() keeps seeing an
interrupt in the IIR register that is not cleared because the driver
does not call into sc16is7xx_handle_rx() unless the RXLVL register
reports at least one byte in the FIFO.
Fix this by always reading one byte from the FIFO when this condition
is detected in order to clear the interrupt. This approach was
confirmed to be correct by NXP through their support channels.
Tested by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Signed-off-by: Daniel Mack <daniel@zonque.org>
Co-Developed-by: Maxim Popov <maxim.snafu@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231123072818.1394539-1-daniel@zonque.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Wed, 22 Nov 2023 17:15:03 +0000 (18:15 +0100)]
ARM: PL011: Fix DMA support
commit
58ac1b3799799069d53f5bf95c093f2fe8dd3cc5 upstream.
Since there is no guarantee that the memory returned by
dma_alloc_coherent() is associated with a 'struct page', using the
architecture specific phys_to_page() is wrong, but using
virt_to_page() would be as well.
Stop using sg lists altogether and just use the *_single() functions
instead. This also simplifies the code a bit since the scatterlists in
this driver always have only one entry anyway.
https://lore.kernel.org/lkml/
86db0fe5-930d-4cbb-bd7d-
03367da38951@app.fastmail.com/
Use consistent names for dma buffers
gc: Add a commit log from the initial thread:
https://lore.kernel.org/lkml/
86db0fe5-930d-4cbb-bd7d-
03367da38951@app.fastmail.com/
Use consistent names for dma buffers
Fixes:
cb06ff102e2d7 ("ARM: PL011: Add support for Rx DMA buffer polling.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20231122171503.235649-1-gregory.clement@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RD Babiera [Wed, 29 Nov 2023 19:23:50 +0000 (19:23 +0000)]
usb: typec: class: fix typec_altmode_put_partner to put plugs
commit
b17b7fe6dd5c6ff74b38b0758ca799cdbb79e26e upstream.
When typec_altmode_put_partner is called by a plug altmode upon release,
the port altmode the plug belongs to will not remove its reference to the
plug. The check to see if the altmode being released evaluates against the
released altmode's partner instead of the calling altmode itself, so change
adev in typec_altmode_put_partner to properly refer to the altmode being
released.
typec_altmode_set_partner is not run for port altmodes, so also add a check
in typec_altmode_release to prevent typec_altmode_put_partner() calls on
port altmode release.
Fixes:
8a37d87d72f0 ("usb: typec: Bus type for alternate modes")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20231129192349.1773623-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paulo Alcantara [Wed, 6 Dec 2023 00:49:29 +0000 (21:49 -0300)]
smb: client: fix potential NULL deref in parse_dfs_referrals()
commit
92414333eb375ed64f4ae92d34d579e826936480 upstream.
If server returned no data for FSCTL_DFS_GET_REFERRALS, @dfs_rsp will
remain NULL and then parse_dfs_referrals() will dereference it.
Fix this by returning -EIO when no output data is returned.
Besides, we can't fix it in SMB2_ioctl() as some FSCTLs are allowed to
return no data as per MS-SMB2 2.2.32.
Fixes:
9d49640a21bf ("CIFS: implement get_dfs_refer for SMB2+")
Cc: stable@vger.kernel.org
Reported-by: Robert Morris <rtm@csail.mit.edu>
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mathias Nyman [Tue, 5 Dec 2023 09:05:48 +0000 (11:05 +0200)]
Revert "xhci: Loosen RPM as default policy to cover for AMD xHC 1.1"
commit
24be0b3c40594a14b65141ced486ae327398faf8 upstream.
This reverts commit
4baf1218150985ee3ab0a27220456a1f027ea0ac.
Enabling runtime pm as default for all AMD xHC 1.1 controllers caused
regression. An initial attempt to fix those was done in commit
a5d6264b638e
("xhci: Enable RPM on controllers that support low-power states") but new
issues are still seen.
Revert this to get those AMD xHC 1.1 systems working
This patch went to stable an needs to be reverted from there as well.
Fixes:
4baf12181509 ("xhci: Loosen RPM as default policy to cover for AMD xHC 1.1")
Link: https://lore.kernel.org/linux-usb/55c50bf5-bffb-454e-906e-4408c591cb63@molgen.mpg.de
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20231205090548.1377667-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Howells [Mon, 4 Dec 2023 14:01:59 +0000 (14:01 +0000)]
cifs: Fix non-availability of dedup breaking generic/304
commit
691a41d8da4b34fe72f09393505f55f28a8f34ec upstream.
Deduplication isn't supported on cifs, but cifs doesn't reject it, instead
treating it as extent duplication/cloning. This can cause generic/304 to go
silly and run for hours on end.
Fix cifs to indicate EOPNOTSUPP if REMAP_FILE_DEDUP is set in
->remap_file_range().
Note that it's unclear whether or not commit
b073a08016a1 is meant to cause
cifs to return an error if REMAP_FILE_DEDUP.
Fixes:
b073a08016a1 ("cifs: fix that return -EINVAL when do dedupe operation")
Cc: stable@vger.kernel.org
Suggested-by: Dave Chinner <david@fromorbit.com>
cc: Xiaoli Feng <fengxiaoli0714@gmail.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Darrick Wong <darrick.wong@oracle.com>
cc: fstests@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/3876191.1701555260@warthog.procyon.org.uk/
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cameron Williams [Thu, 2 Nov 2023 21:10:40 +0000 (21:10 +0000)]
parport: Add support for Brainboxes IX/UC/PX parallel cards
commit
1a031f6edc460e9562098bdedc3918da07c30a6e upstream.
Adds support for Intashield IX-500/IX-550, UC-146/UC-157, PX-146/PX-157,
PX-203 and PX-475 (LPT port)
Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/AS4PR02MB790389C130410BD864C8DCC9C4A6A@AS4PR02MB7903.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Shevchenko [Tue, 5 Dec 2023 19:55:24 +0000 (21:55 +0200)]
serial: 8250_dw: Add ACPI ID for Granite Rapids-D UART
commit
e92fad024929c79460403acf946bc9c09ce5c3a9 upstream.
Granite Rapids-D has an additional UART that is enumerated via ACPI.
Add ACPI ID for it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20231205195524.2705965-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Konstantin Aladyshev [Wed, 6 Dec 2023 08:07:44 +0000 (11:07 +0300)]
usb: gadget: f_hid: fix report descriptor allocation
commit
61890dc28f7d9e9aac8a9471302613824c22fae4 upstream.
The commit
89ff3dfac604 ("usb: gadget: f_hid: fix f_hidg lifetime vs
cdev") has introduced a bug that leads to hid device corruption after
the replug operation.
Reverse device managed memory allocation for the report descriptor
to fix the issue.
Tested:
This change was tested on the AMD EthanolX CRB server with the BMC
based on the OpenBMC distribution. The BMC provides KVM functionality
via the USB gadget device:
- before: KVM page refresh results in a broken USB device,
- after: KVM page refresh works without any issues.
Fixes:
89ff3dfac604 ("usb: gadget: f_hid: fix f_hidg lifetime vs cdev")
Cc: stable@vger.kernel.org
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Link: https://lore.kernel.org/r/20231206080744.253-2-aladyshev22@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Candice Li [Fri, 24 Nov 2023 01:33:47 +0000 (09:33 +0800)]
drm/amdgpu: Update EEPROM I2C address for smu v13_0_0
[ Upstream commit
e0409021e34af50e7b6f31635c8d21583d7c43dd ]
Check smu v13_0_0 SKU type to select EEPROM I2C address.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Sasha Levin <sashal@kernel.org>
Candice Li [Tue, 1 Aug 2023 13:23:49 +0000 (21:23 +0800)]
drm/amdgpu: Add I2C EEPROM support on smu v13_0_6
[ Upstream commit
b81fde0dfe402e864ef1ac506eba756c89f1ad32 ]
Support I2C EEPROM on smu v13_0_6.
v2: Move IP_VERSION(13, 0, 6) ahead of IP_VERSION(13, 0, 10).
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of:
e0409021e34a ("drm/amdgpu: Update EEPROM I2C address for smu v13_0_0")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alex Deucher [Tue, 28 Mar 2023 00:09:08 +0000 (20:09 -0400)]
drm/amdgpu: simplify amdgpu_ras_eeprom.c
[ Upstream commit
6246059a19d4cd32ef1af42a6ab016b779cd68c4 ]
All chips that support RAS also support IP discovery, so
use the IP versions rather than a mix of IP versions and
asic types. Checking the validity of the atom_ctx pointer
is not required as the vbios is already fetched at this
point.
v2: add comments to id asic types based on feedback from Luben
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Stable-dep-of:
e0409021e34a ("drm/amdgpu: Update EEPROM I2C address for smu v13_0_0")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Luben Tuikov [Thu, 23 Mar 2023 05:46:41 +0000 (01:46 -0400)]
drm/amdgpu: Return from switch early for EEPROM I2C address
[ Upstream commit
8782007b5f5795f118c5167f46d8c8142abcc92f ]
As soon as control->i2c_address is set, return; remove the "break;" from the
switch--it is unnecessary. This mimics what happens when for some cases in the
switch, we call helper functions with "return <helper function>".
Remove final function "return true;" to indicate that the switch is final and
terminal, and that there should be no code after the switch.
Cc: Candice Li <candice.li@amd.com>
Cc: Kent Russell <kent.russell@amd.com>
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of:
e0409021e34a ("drm/amdgpu: Update EEPROM I2C address for smu v13_0_0")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Luben Tuikov [Thu, 23 Mar 2023 04:56:26 +0000 (00:56 -0400)]
drm/amdgpu: Remove second moot switch to set EEPROM I2C address
[ Upstream commit
1bb745d7596d2b368fd9afb90473f3581495e39d ]
Remove second switch since it already has its own function and case in the
first switch. This also avoids requalifying the EEPROM I2C address for VEGA20,
SIENNA CICHLID, and ALDEBARAN, as those have been set by the first switch and
shouldn't match SMU v13.0.x.
Cc: Candice Li <candice.li@amd.com>
Cc: Kent Russell <kent.russell@amd.com>
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Fixes:
158225294683 ("drm/amdgpu: Add EEPROM I2C address for smu v13_0_0")
Fixes:
c9bdc6c3cf39 ("drm/amdgpu: Add EEPROM I2C address support for ip discovery")
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of:
e0409021e34a ("drm/amdgpu: Update EEPROM I2C address for smu v13_0_0")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Luben Tuikov [Tue, 15 Nov 2022 05:36:03 +0000 (00:36 -0500)]
drm/amdgpu: Add support for RAS table at 0x40000
[ Upstream commit
64a3dbb06ad88d89a0958ccafc4f01611657f641 ]
Add support for RAS table at I2C EEPROM address of 0x40000, since on some
ASICs it is not at 0, but at 0x40000.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Kent Russell <kent.russell@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Tested-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of:
e0409021e34a ("drm/amdgpu: Update EEPROM I2C address for smu v13_0_0")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Luben Tuikov [Mon, 7 Nov 2022 17:38:03 +0000 (12:38 -0500)]
drm/amdgpu: Decouple RAS EEPROM addresses from chips
[ Upstream commit
3b8164f8084ff7888ed24970efa230ff5d36eda8 ]
Abstract RAS I2C EEPROM addresses from chip names, and set their macro
definition names to the address they set, not the chip they attach
to. Since most chips either use I2C EEPROM address 0 or 40000h for the RAS
table start offset, this leaves us with only two macro definitions as
opposed to five, and removes the redundancy of four.
Cc: Candice Li <candice.li@amd.com>
Cc: Tao Zhou <tao.zhou1@amd.com>
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of:
e0409021e34a ("drm/amdgpu: Update EEPROM I2C address for smu v13_0_0")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Luben Tuikov [Mon, 7 Nov 2022 17:06:44 +0000 (12:06 -0500)]
drm/amdgpu: Remove redundant I2C EEPROM address
[ Upstream commit
da858deab88eb561f2196bc99b6dbd2320e56456 ]
Remove redundant EEPROM_I2C_MADDR_54H address, since we already have it
represented (ARCTURUS), and since we don't include the I2C device type
identifier in EEPROM memory addresses, i.e. that high up in the device
abstraction--we only use EEPROM memory addresses, as memory is continuously
represented by EEPROM device(s) on the I2C bus.
Add a comment describing what these memory addresses are, how they come
about and how they're usually extracted from the device address byte.
Cc: Candice Li <candice.li@amd.com>
Cc: Tao Zhou <tao.zhou1@amd.com>
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Fixes:
c9bdc6c3cf39df ("drm/amdgpu: Add EEPROM I2C address support for ip discovery")
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of:
e0409021e34a ("drm/amdgpu: Update EEPROM I2C address for smu v13_0_0")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Candice Li [Tue, 11 Oct 2022 07:08:38 +0000 (15:08 +0800)]
drm/amdgpu: Add EEPROM I2C address support for ip discovery
[ Upstream commit
c9bdc6c3cf39df6db9c611d05fc512b1276b1cc8 ]
1. Update EEPROM_I2C_MADDR_SMU_13_0_0 to EEPROM_I2C_MADDR_54H
2. Add EEPROM I2C address support for smu v13_0_0 and v13_0_10.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of:
e0409021e34a ("drm/amdgpu: Update EEPROM I2C address for smu v13_0_0")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Candice Li [Mon, 10 Oct 2022 08:26:37 +0000 (16:26 +0800)]
drm/amdgpu: Update ras eeprom support for smu v13_0_0 and v13_0_10
[ Upstream commit
bc22f8ec464af9e14263c3ed6a1c2be86618c804 ]
Enable RAS EEPROM support for smu v13_0_0 and v13_0_10.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of:
e0409021e34a ("drm/amdgpu: Update EEPROM I2C address for smu v13_0_0")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Prike Liang [Wed, 8 Nov 2023 06:38:29 +0000 (14:38 +0800)]
drm/amdgpu: correct the amdgpu runtime dereference usage count
[ Upstream commit
c6df7f313794c3ad41a49b9a7c95da369db607f3 ]
Fix the amdgpu runpm dereference usage count.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Srinivasan Shanmugam [Tue, 18 Jul 2023 06:58:37 +0000 (12:28 +0530)]
drm/amd/amdgpu: Fix warnings in amdgpu/amdgpu_display.c
[ Upstream commit
93125cb704919f572c01e02ef64923caff1c3164 ]
Fixes the below checkpatch.pl warnings:
WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line
WARNING: suspect code indent for conditional statements (8, 12)
WARNING: braces {} are not necessary for single statement blocks
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of:
c6df7f313794 ("drm/amdgpu: correct the amdgpu runtime dereference usage count")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tim Huang [Tue, 21 Nov 2023 03:06:51 +0000 (11:06 +0800)]
drm/amdgpu: fix memory overflow in the IB test
[ Upstream commit
6b0b7789a7a5f3e69185449f891beea58e563f9b ]
Fix a memory overflow issue in the gfx IB test
for some ASICs. At least 20 bytes are needed for
the IB test packet.
v2: correct code indentation errors. (Christian)
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Boerge Struempfel [Wed, 29 Nov 2023 15:23:07 +0000 (16:23 +0100)]
gpiolib: sysfs: Fix error handling on failed export
[ Upstream commit
95dd1e34ff5bbee93a28ff3947eceaf6de811b1a ]
If gpio_set_transitory() fails, we should free the GPIO again. Most
notably, the flag FLAG_REQUESTED has previously been set in
gpiod_request_commit(), and should be reset on failure.
To my knowledge, this does not affect any current users, since the
gpio_set_transitory() mainly returns 0 and -ENOTSUPP, which is converted
to 0. However the gpio_set_transitory() function calles the .set_config()
function of the corresponding GPIO chip and there are some GPIO drivers in
which some (unlikely) branches return other values like -EPROBE_DEFER,
and -EINVAL. In these cases, the above mentioned FLAG_REQUESTED would not
be reset, which results in the pin being blocked until the next reboot.
Fixes:
e10f72bf4b3e ("gpio: gpiolib: Generalise state persistence beyond sleep")
Signed-off-by: Boerge Struempfel <boerge.struempfel@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ashwin Dayanand Kamat [Wed, 29 Nov 2023 10:40:29 +0000 (16:10 +0530)]
x86/sev: Fix kernel crash due to late update to read-only ghcb_version
[ Upstream commit
27d25348d42161837be08fc63b04a2559d2e781c ]
A write-access violation page fault kernel crash was observed while running
cpuhotplug LTP testcases on SEV-ES enabled systems. The crash was
observed during hotplug, after the CPU was offlined and the process
was migrated to different CPU. setup_ghcb() is called again which
tries to update ghcb_version in sev_es_negotiate_protocol(). Ideally this
is a read_only variable which is initialised during booting.
Trying to write it results in a pagefault:
BUG: unable to handle page fault for address:
ffffffffba556e70
#PF: supervisor write access in kernel mode
#PF: error_code(0x0003) - permissions violation
[ ...]
Call Trace:
<TASK>
? __die_body.cold+0x1a/0x1f
? __die+0x2a/0x35
? page_fault_oops+0x10c/0x270
? setup_ghcb+0x71/0x100
? __x86_return_thunk+0x5/0x6
? search_exception_tables+0x60/0x70
? __x86_return_thunk+0x5/0x6
? fixup_exception+0x27/0x320
? kernelmode_fixup_or_oops+0xa2/0x120
? __bad_area_nosemaphore+0x16a/0x1b0
? kernel_exc_vmm_communication+0x60/0xb0
? bad_area_nosemaphore+0x16/0x20
? do_kern_addr_fault+0x7a/0x90
? exc_page_fault+0xbd/0x160
? asm_exc_page_fault+0x27/0x30
? setup_ghcb+0x71/0x100
? setup_ghcb+0xe/0x100
cpu_init_exception_handling+0x1b9/0x1f0
The fix is to call sev_es_negotiate_protocol() only in the BSP boot phase,
and it only needs to be done once in any case.
[ mingo: Refined the changelog. ]
Fixes:
95d33bfaa3e1 ("x86/sev: Register GHCB memory when SEV-SNP is active")
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Co-developed-by: Bo Gan <bo.gan@broadcom.com>
Signed-off-by: Bo Gan <bo.gan@broadcom.com>
Signed-off-by: Ashwin Dayanand Kamat <ashwin.kamat@broadcom.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/1701254429-18250-1-git-send-email-kashwindayan@vmware.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peter Zijlstra [Wed, 29 Nov 2023 14:24:52 +0000 (15:24 +0100)]
perf: Fix perf_event_validate_size()
[ Upstream commit
382c27f4ed28f803b1f1473ac2d8db0afc795a1b ]
Budimir noted that perf_event_validate_size() only checks the size of
the newly added event, even though the sizes of all existing events
can also change due to not all events having the same read_format.
When we attach the new event, perf_group_attach(), we do re-compute
the size for all events.
Fixes:
a723968c0ed3 ("perf: Fix u16 overflows")
Reported-by: Budimir Markovic <markovicbudimir@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hsin-Yi Wang [Thu, 26 Oct 2023 19:09:10 +0000 (12:09 -0700)]
arm64: dts: mt8183: kukui: Fix underscores in node names
[ Upstream commit
8980c30141d3986beab815d85762b9c67196ed72 ]
Replace underscores with hyphens in pinctrl node names both for consistency
and to adhere to the bindings.
Cc: stable@vger.kernel.org
Fixes:
cd894e274b74 ("arm64: dts: mt8183: Add krane-sku176 board")
Fixes:
1652dbf7363a ("arm64: dts: mt8183: add scp node")
Fixes:
27eaf34df364 ("arm64: dts: mt8183: config dsi node")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231026191343.3345279-2-hsinyi@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Krzysztof Kozlowski [Wed, 5 Jul 2023 15:00:06 +0000 (17:00 +0200)]
arm64: dts: mediatek: add missing space before {
[ Upstream commit
a9c740c57f977deb41bc53c02d0dae3d0e2f191a ]
Add missing whitespace between node name/label and opening {.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230705150006.293690-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Stable-dep-of:
8980c30141d3 ("arm64: dts: mt8183: kukui: Fix underscores in node names")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Helge Deller [Mon, 27 Nov 2023 09:39:26 +0000 (10:39 +0100)]
parisc: Fix asm operand number out of range build error in bug table
[ Upstream commit
487635756198cad563feb47539c6a37ea57f1dae ]
Build is broken if CONFIG_DEBUG_BUGVERBOSE=n.
Fix it be using the correct asm operand number.
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Fixes:
fe76a1349f23 ("parisc: Use natural CPU alignment for bug_table")
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Sasha Levin <sashal@kernel.org>
Helge Deller [Thu, 23 Nov 2023 20:57:19 +0000 (21:57 +0100)]
parisc: Reduce size of the bug_table on 64-bit kernel by half
[ Upstream commit
43266838515d30dc0c45d5c7e6e7edacee6cce92 ]
Enable GENERIC_BUG_RELATIVE_POINTERS which will store 32-bit relative
offsets to the bug address and the source file name instead of 64-bit
absolute addresses. This effectively reduces the size of the
bug_table[] array by half on 64-bit kernels.
Signed-off-by: Helge Deller <deller@gmx.de>
Stable-dep-of:
487635756198 ("parisc: Fix asm operand number out of range build error in bug table")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Steven Rostedt (Google) [Tue, 5 Dec 2023 21:52:10 +0000 (16:52 -0500)]
tracing: Stop current tracer when resizing buffer
[ Upstream commit
d78ab792705c7be1b91243b2544d1a79406a2ad7 ]
When the ring buffer is being resized, it can cause side effects to the
running tracer. For instance, there's a race with irqsoff tracer that
swaps individual per cpu buffers between the main buffer and the snapshot
buffer. The resize operation modifies the main buffer and then the
snapshot buffer. If a swap happens in between those two operations it will
break the tracer.
Simply stop the running tracer before resizing the buffers and enable it
again when finished.
Link: https://lkml.kernel.org/r/20231205220010.748996423@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes:
3928a8a2d9808 ("ftrace: make work with new ring buffer")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zheng Yejian [Wed, 5 Jul 2023 00:27:05 +0000 (08:27 +0800)]
tracing: Set actual size after ring buffer resize
[ Upstream commit
6d98a0f2ac3c021d21be66fa34e992137cd25bcb ]
Currently we can resize trace ringbuffer by writing a value into file
'buffer_size_kb', then by reading the file, we get the value that is
usually what we wrote. However, this value may be not actual size of
trace ring buffer because of the round up when doing resize in kernel,
and the actual size would be more useful.
Link: https://lore.kernel.org/linux-trace-kernel/20230705002705.576633-1-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Stable-dep-of:
d78ab792705c ("tracing: Stop current tracer when resizing buffer")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Steven Rostedt (Google) [Wed, 6 Dec 2023 15:02:44 +0000 (10:02 -0500)]
ring-buffer: Force absolute timestamp on discard of event
[ Upstream commit
b2dd797543cfa6580eac8408dd67fa02164d9e56 ]
There's a race where if an event is discarded from the ring buffer and an
interrupt were to happen at that time and insert an event, the time stamp
is still used from the discarded event as an offset. This can screw up the
timings.
If the event is going to be discarded, set the "before_stamp" to zero.
When a new event comes in, it compares the "before_stamp" with the
"write_stamp" and if they are not equal, it will insert an absolute
timestamp. This will prevent the timings from getting out of sync due to
the discarded event.
Link: https://lore.kernel.org/linux-trace-kernel/20231206100244.5130f9b3@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes:
6f6be606e763f ("ring-buffer: Force before_stamp and write_stamp to be different on discard")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hengqi Chen [Sat, 9 Dec 2023 07:49:16 +0000 (15:49 +0800)]
LoongArch: BPF: Don't sign extend function return value
[ Upstream commit
5d47ec2e6f4c64e30e392cfe9532df98c9beb106 ]
The `cls_redirect` test triggers a kernel panic like:
# ./test_progs -t cls_redirect
Can't find bpf_testmod.ko kernel module: -2
WARNING! Selftests relying on bpf_testmod.ko will be skipped.
[ 30.938489] CPU 3 Unable to handle kernel paging request at virtual address
fffffffffd814de0, era ==
ffff800002009fb8, ra ==
ffff800002009f9c
[ 30.939331] Oops[#1]:
[ 30.939513] CPU: 3 PID: 1260 Comm: test_progs Not tainted 6.7.0-rc2-loong-devel-g2f56bb0d2327 #35
a896aca3f4164f09cc346f89f2e09832e07be5f6
[ 30.939732] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022
[ 30.939901] pc
ffff800002009fb8 ra
ffff800002009f9c tp
9000000104da4000 sp
9000000104da7ab0
[ 30.940038] a0
fffffffffd814de0 a1
9000000104da7a68 a2
0000000000000000 a3
9000000104da7c10
[ 30.940183] a4
9000000104da7c14 a5
0000000000000002 a6
0000000000000021 a7
00005555904d7f90
[ 30.940321] t0
0000000000000110 t1
0000000000000000 t2
fffffffffd814de0 t3
0004c4b400000000
[ 30.940456] t4
ffffffffffffffff t5
00000000c3f63600 t6
0000000000000000 t7
0000000000000000
[ 30.940590] t8
000000000006d803 u0
0000000000000020 s9
9000000104da7b10 s0
900000010504c200
[ 30.940727] s1
fffffffffd814de0 s2
900000010504c200 s3
9000000104da7c10 s4
9000000104da7ad0
[ 30.940866] s5
0000000000000000 s6
90000000030e65bc s7
9000000104da7b44 s8
90000000044f6fc0
[ 30.941015] ra:
ffff800002009f9c bpf_prog_846803e5ae81417f_cls_redirect+0xa0/0x590
[ 30.941535] ERA:
ffff800002009fb8 bpf_prog_846803e5ae81417f_cls_redirect+0xbc/0x590
[ 30.941696] CRMD:
000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
[ 30.942224] PRMD:
00000004 (PPLV0 +PIE -PWE)
[ 30.942330] EUEN:
00000003 (+FPE +SXE -ASXE -BTE)
[ 30.942453] ECFG:
00071c1c (LIE=2-4,10-12 VS=7)
[ 30.942612] ESTAT:
00010000 [PIL] (IS= ECode=1 EsubCode=0)
[ 30.942764] BADV:
fffffffffd814de0
[ 30.942854] PRID:
0014c010 (Loongson-64bit, Loongson-3A5000)
[ 30.942974] Modules linked in:
[ 30.943078] Process test_progs (pid: 1260, threadinfo=
00000000ce303226, task=
000000007d10bb76)
[ 30.943306] Stack :
900000010a064000 90000000044f6fc0 9000000104da7b48 0000000000000000
[ 30.943495]
0000000000000000 9000000104da7c14 9000000104da7c10 900000010504c200
[ 30.943626]
0000000000000001 ffff80001b88c000 9000000104da7b70 90000000030e6668
[ 30.943785]
0000000000000000 9000000104da7b58 ffff80001b88c048 9000000003d05000
[ 30.943936]
900000000303ac88 0000000000000000 0000000000000000 9000000104da7b70
[ 30.944091]
0000000000000000 0000000000000001 0000000731eeab00 0000000000000000
[ 30.944245]
ffff80001b88c000 0000000000000000 0000000000000000 54b99959429f83b8
[ 30.944402]
ffff80001b88c000 90000000044f6fc0 9000000101d70000 ffff80001b88c000
[ 30.944538]
000000000000005a 900000010504c200 900000010a064000 900000010a067000
[ 30.944697]
9000000104da7d88 0000000000000000 9000000003d05000 90000000030e794c
[ 30.944852] ...
[ 30.944924] Call Trace:
[ 30.945120] [<
ffff800002009fb8>] bpf_prog_846803e5ae81417f_cls_redirect+0xbc/0x590
[ 30.945650] [<
90000000030e6668>] bpf_test_run+0x1ec/0x2f8
[ 30.945958] [<
90000000030e794c>] bpf_prog_test_run_skb+0x31c/0x684
[ 30.946065] [<
90000000026d4f68>] __sys_bpf+0x678/0x2724
[ 30.946159] [<
90000000026d7288>] sys_bpf+0x20/0x2c
[ 30.946253] [<
90000000032dd224>] do_syscall+0x7c/0x94
[ 30.946343] [<
9000000002541c5c>] handle_syscall+0xbc/0x158
[ 30.946492]
[ 30.946549] Code:
0015030e 5c0009c0 5001d000 <
28c00304>
02c00484 29c00304 00150009 2a42d2e4 0280200d
[ 30.946793]
[ 30.946971] ---[ end trace
0000000000000000 ]---
[ 32.093225] Kernel panic - not syncing: Fatal exception in interrupt
[ 32.093526] Kernel relocated by 0x2320000
[ 32.093630] .text @ 0x9000000002520000
[ 32.093725] .data @ 0x9000000003400000
[ 32.093792] .bss @ 0x9000000004413200
[ 34.971998] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
This is because we signed-extend function return values. When subprog
mode is enabled, we have:
cls_redirect()
-> get_global_metrics() returns pcpu ptr 0xfffffefffc00b480
The pointer returned is later signed-extended to 0xfffffffffc00b480 at
`BPF_JMP | BPF_EXIT`. During BPF prog run, this triggers unhandled page
fault and a kernel panic.
Drop the unnecessary signed-extension on return values like other
architectures do.
With this change, we have:
# ./test_progs -t cls_redirect
Can't find bpf_testmod.ko kernel module: -2
WARNING! Selftests relying on bpf_testmod.ko will be skipped.
#51/1 cls_redirect/cls_redirect_inlined:OK
#51/2 cls_redirect/IPv4 TCP accept unknown (no hops, flags: SYN):OK
#51/3 cls_redirect/IPv6 TCP accept unknown (no hops, flags: SYN):OK
#51/4 cls_redirect/IPv4 TCP accept unknown (no hops, flags: ACK):OK
#51/5 cls_redirect/IPv6 TCP accept unknown (no hops, flags: ACK):OK
#51/6 cls_redirect/IPv4 TCP forward unknown (one hop, flags: ACK):OK
#51/7 cls_redirect/IPv6 TCP forward unknown (one hop, flags: ACK):OK
#51/8 cls_redirect/IPv4 TCP accept known (one hop, flags: ACK):OK
#51/9 cls_redirect/IPv6 TCP accept known (one hop, flags: ACK):OK
#51/10 cls_redirect/IPv4 UDP accept unknown (no hops, flags: none):OK
#51/11 cls_redirect/IPv6 UDP accept unknown (no hops, flags: none):OK
#51/12 cls_redirect/IPv4 UDP forward unknown (one hop, flags: none):OK
#51/13 cls_redirect/IPv6 UDP forward unknown (one hop, flags: none):OK
#51/14 cls_redirect/IPv4 UDP accept known (one hop, flags: none):OK
#51/15 cls_redirect/IPv6 UDP accept known (one hop, flags: none):OK
#51/16 cls_redirect/cls_redirect_subprogs:OK
#51/17 cls_redirect/IPv4 TCP accept unknown (no hops, flags: SYN):OK
#51/18 cls_redirect/IPv6 TCP accept unknown (no hops, flags: SYN):OK
#51/19 cls_redirect/IPv4 TCP accept unknown (no hops, flags: ACK):OK
#51/20 cls_redirect/IPv6 TCP accept unknown (no hops, flags: ACK):OK
#51/21 cls_redirect/IPv4 TCP forward unknown (one hop, flags: ACK):OK
#51/22 cls_redirect/IPv6 TCP forward unknown (one hop, flags: ACK):OK
#51/23 cls_redirect/IPv4 TCP accept known (one hop, flags: ACK):OK
#51/24 cls_redirect/IPv6 TCP accept known (one hop, flags: ACK):OK
#51/25 cls_redirect/IPv4 UDP accept unknown (no hops, flags: none):OK
#51/26 cls_redirect/IPv6 UDP accept unknown (no hops, flags: none):OK
#51/27 cls_redirect/IPv4 UDP forward unknown (one hop, flags: none):OK
#51/28 cls_redirect/IPv6 UDP forward unknown (one hop, flags: none):OK
#51/29 cls_redirect/IPv4 UDP accept known (one hop, flags: none):OK
#51/30 cls_redirect/IPv6 UDP accept known (one hop, flags: none):OK
#51/31 cls_redirect/cls_redirect_dynptr:OK
#51/32 cls_redirect/IPv4 TCP accept unknown (no hops, flags: SYN):OK
#51/33 cls_redirect/IPv6 TCP accept unknown (no hops, flags: SYN):OK
#51/34 cls_redirect/IPv4 TCP accept unknown (no hops, flags: ACK):OK
#51/35 cls_redirect/IPv6 TCP accept unknown (no hops, flags: ACK):OK
#51/36 cls_redirect/IPv4 TCP forward unknown (one hop, flags: ACK):OK
#51/37 cls_redirect/IPv6 TCP forward unknown (one hop, flags: ACK):OK
#51/38 cls_redirect/IPv4 TCP accept known (one hop, flags: ACK):OK
#51/39 cls_redirect/IPv6 TCP accept known (one hop, flags: ACK):OK
#51/40 cls_redirect/IPv4 UDP accept unknown (no hops, flags: none):OK
#51/41 cls_redirect/IPv6 UDP accept unknown (no hops, flags: none):OK
#51/42 cls_redirect/IPv4 UDP forward unknown (one hop, flags: none):OK
#51/43 cls_redirect/IPv6 UDP forward unknown (one hop, flags: none):OK
#51/44 cls_redirect/IPv4 UDP accept known (one hop, flags: none):OK
#51/45 cls_redirect/IPv6 UDP accept known (one hop, flags: none):OK
#51 cls_redirect:OK
Summary: 1/45 PASSED, 0 SKIPPED, 0 FAILED
Fixes:
5dc615520c4d ("LoongArch: Add BPF JIT support")
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hengqi Chen [Sat, 9 Dec 2023 07:49:16 +0000 (15:49 +0800)]
LoongArch: BPF: Don't sign extend memory load operand
[ Upstream commit
fe5757553bf9ebe45ae8ecab5922f6937c8d8dfc ]
The `cgrp_local_storage` test triggers a kernel panic like:
# ./test_progs -t cgrp_local_storage
Can't find bpf_testmod.ko kernel module: -2
WARNING! Selftests relying on bpf_testmod.ko will be skipped.
[ 550.930632] CPU 1 Unable to handle kernel paging request at virtual address
0000000000000080, era ==
ffff80000200be34, ra ==
ffff80000200be00
[ 550.931781] Oops[#1]:
[ 550.931966] CPU: 1 PID: 1303 Comm: test_progs Not tainted 6.7.0-rc2-loong-devel-g2f56bb0d2327 #35
a896aca3f4164f09cc346f89f2e09832e07be5f6
[ 550.932215] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022
[ 550.932403] pc
ffff80000200be34 ra
ffff80000200be00 tp
9000000108350000 sp
9000000108353dc0
[ 550.932545] a0
0000000000000000 a1
0000000000000517 a2
0000000000000118 a3
00007ffffbb15558
[ 550.932682] a4
00007ffffbb15620 a5
90000001004e7700 a6
0000000000000021 a7
0000000000000118
[ 550.932824] t0
ffff80000200bdc0 t1
0000000000000517 t2
0000000000000517 t3
00007ffff1c06ee0
[ 550.932961] t4
0000555578ae04d0 t5
fffffffffffffff8 t6
0000000000000004 t7
0000000000000020
[ 550.933097] t8
0000000000000040 u0
00000000000007b8 s9
9000000108353e00 s0
90000001004e7700
[ 550.933241] s1
9000000004005000 s2
0000000000000001 s3
0000000000000000 s4
0000555555eb2ec8
[ 550.933379] s5
00007ffffbb15bb8 s6
00007ffff1dafd60 s7
000055555663f610 s8
00007ffff1db0050
[ 550.933520] ra:
ffff80000200be00 bpf_prog_98f1b9e767be2a84_on_enter+0x40/0x200
[ 550.933911] ERA:
ffff80000200be34 bpf_prog_98f1b9e767be2a84_on_enter+0x74/0x200
[ 550.934105] CRMD:
000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
[ 550.934596] PRMD:
00000004 (PPLV0 +PIE -PWE)
[ 550.934712] EUEN:
00000003 (+FPE +SXE -ASXE -BTE)
[ 550.934836] ECFG:
00071c1c (LIE=2-4,10-12 VS=7)
[ 550.934976] ESTAT:
00010000 [PIL] (IS= ECode=1 EsubCode=0)
[ 550.935097] BADV:
0000000000000080
[ 550.935181] PRID:
0014c010 (Loongson-64bit, Loongson-3A5000)
[ 550.935291] Modules linked in:
[ 550.935391] Process test_progs (pid: 1303, threadinfo=
000000006c3b1c41, task=
0000000061f84a55)
[ 550.935643] Stack :
00007ffffbb15bb8 0000555555eb2ec8 0000000000000000 0000000000000001
[ 550.935844]
9000000004005000 ffff80001b864000 00007ffffbb15450 90000000029aa034
[ 550.935990]
0000000000000000 9000000108353ec0 0000000000000118 d07d9dfb09721a09
[ 550.936175]
0000000000000001 0000000000000000 9000000108353ec0 0000000000000118
[ 550.936314]
9000000101d46ad0 900000000290abf0 000055555663f610 0000000000000000
[ 550.936479]
0000000000000003 9000000108353ec0 00007ffffbb15450 90000000029d7288
[ 550.936635]
00007ffff1dafd60 000055555663f610 0000000000000000 0000000000000003
[ 550.936779]
9000000108353ec0 90000000035dd1f0 00007ffff1dafd58 9000000002841c5c
[ 550.936939]
0000000000000119 0000555555eea5a8 00007ffff1d78780 00007ffffbb153e0
[ 550.937083]
ffffffffffffffda 00007ffffbb15518 0000000000000040 00007ffffbb15558
[ 550.937224] ...
[ 550.937299] Call Trace:
[ 550.937521] [<
ffff80000200be34>] bpf_prog_98f1b9e767be2a84_on_enter+0x74/0x200
[ 550.937910] [<
90000000029aa034>] bpf_trace_run2+0x90/0x154
[ 550.938105] [<
900000000290abf0>] syscall_trace_enter.isra.0+0x1cc/0x200
[ 550.938224] [<
90000000035dd1f0>] do_syscall+0x48/0x94
[ 550.938319] [<
9000000002841c5c>] handle_syscall+0xbc/0x158
[ 550.938477]
[ 550.938607] Code:
580009ae 50016000 262402e4 <
28c20085>
14092084 03a00084 16000024 03240084 00150006
[ 550.938851]
[ 550.939021] ---[ end trace
0000000000000000 ]---
Further investigation shows that this panic is triggered by memory
load operations:
ptr = bpf_cgrp_storage_get(&map_a, task->cgroups->dfl_cgrp, 0,
BPF_LOCAL_STORAGE_GET_F_CREATE);
The expression `task->cgroups->dfl_cgrp` involves two memory load.
Since the field offset fits in imm12 or imm14, we use ldd or ldptrd
instructions. But both instructions have the side effect that it will
signed-extended the imm operand. Finally, we got the wrong addresses
and panics is inevitable.
Use a generic ldxd instruction to avoid this kind of issues.
With this change, we have:
# ./test_progs -t cgrp_local_storage
Can't find bpf_testmod.ko kernel module: -2
WARNING! Selftests relying on bpf_testmod.ko will be skipped.
test_cgrp_local_storage:PASS:join_cgroup /cgrp_local_storage 0 nsec
#48/1 cgrp_local_storage/tp_btf:OK
test_attach_cgroup:PASS:skel_open 0 nsec
test_attach_cgroup:PASS:prog_attach 0 nsec
test_attach_cgroup:PASS:prog_attach 0 nsec
libbpf: prog 'update_cookie_tracing': failed to attach: ERROR: strerror_r(-524)=22
test_attach_cgroup:FAIL:prog_attach unexpected error: -524
#48/2 cgrp_local_storage/attach_cgroup:FAIL
test_recursion:PASS:skel_open_and_load 0 nsec
libbpf: prog 'on_lookup': failed to attach: ERROR: strerror_r(-524)=22
libbpf: prog 'on_lookup': failed to auto-attach: -524
test_recursion:FAIL:skel_attach unexpected error: -524 (errno 524)
#48/3 cgrp_local_storage/recursion:FAIL
#48/4 cgrp_local_storage/negative:OK
#48/5 cgrp_local_storage/cgroup_iter_sleepable:OK
test_yes_rcu_lock:PASS:skel_open 0 nsec
test_yes_rcu_lock:PASS:skel_load 0 nsec
libbpf: prog 'yes_rcu_lock': failed to attach: ERROR: strerror_r(-524)=22
libbpf: prog 'yes_rcu_lock': failed to auto-attach: -524
test_yes_rcu_lock:FAIL:skel_attach unexpected error: -524 (errno 524)
#48/6 cgrp_local_storage/yes_rcu_lock:FAIL
#48/7 cgrp_local_storage/no_rcu_lock:OK
#48 cgrp_local_storage:FAIL
All error logs:
test_cgrp_local_storage:PASS:join_cgroup /cgrp_local_storage 0 nsec
test_attach_cgroup:PASS:skel_open 0 nsec
test_attach_cgroup:PASS:prog_attach 0 nsec
test_attach_cgroup:PASS:prog_attach 0 nsec
libbpf: prog 'update_cookie_tracing': failed to attach: ERROR: strerror_r(-524)=22
test_attach_cgroup:FAIL:prog_attach unexpected error: -524
#48/2 cgrp_local_storage/attach_cgroup:FAIL
test_recursion:PASS:skel_open_and_load 0 nsec
libbpf: prog 'on_lookup': failed to attach: ERROR: strerror_r(-524)=22
libbpf: prog 'on_lookup': failed to auto-attach: -524
test_recursion:FAIL:skel_attach unexpected error: -524 (errno 524)
#48/3 cgrp_local_storage/recursion:FAIL
test_yes_rcu_lock:PASS:skel_open 0 nsec
test_yes_rcu_lock:PASS:skel_load 0 nsec
libbpf: prog 'yes_rcu_lock': failed to attach: ERROR: strerror_r(-524)=22
libbpf: prog 'yes_rcu_lock': failed to auto-attach: -524
test_yes_rcu_lock:FAIL:skel_attach unexpected error: -524 (errno 524)
#48/6 cgrp_local_storage/yes_rcu_lock:FAIL
#48 cgrp_local_storage:FAIL
Summary: 0/4 PASSED, 0 SKIPPED, 1 FAILED
No panics any more (The test still failed because lack of BPF trampoline
which I am actively working on).
Fixes:
5dc615520c4d ("LoongArch: Add BPF JIT support")
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Su Hui [Mon, 20 Nov 2023 09:55:26 +0000 (17:55 +0800)]
misc: mei: client.c: fix problem of return '-EOVERFLOW' in mei_cl_write
[ Upstream commit
ee6236027218f8531916f1c5caa5dc330379f287 ]
Clang static analyzer complains that value stored to 'rets' is never
read.Let 'buf_len = -EOVERFLOW' to make sure we can return '-EOVERFLOW'.
Fixes:
8c8d964ce90f ("mei: move hbuf_depth from the mei device to the hw modules")
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20231120095523.178385-2-suhui@nfschina.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Su Hui [Mon, 20 Nov 2023 09:55:23 +0000 (17:55 +0800)]
misc: mei: client.c: return negative error code in mei_cl_write
[ Upstream commit
8f06aee8089cf42fd99a20184501bd1347ce61b9 ]
mei_msg_hdr_init() return negative error code, rets should be
'PTR_ERR(mei_hdr)' rather than '-PTR_ERR(mei_hdr)'.
Fixes:
0cd7c01a60f8 ("mei: add support for mei extended header.")
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20231120095523.178385-1-suhui@nfschina.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Junhao He [Tue, 10 Oct 2023 08:47:31 +0000 (16:47 +0800)]
hwtracing: hisi_ptt: Add dummy callback pmu::read()
[ Upstream commit
55e0a2fb0cb5ab7c9c99c1ad4d3e6954de8b73a0 ]
When start trace with perf option "-C $cpu" and immediately stop it
with SIGTERM or others, the perf core will invoke pmu::read() while
the driver doesn't implement it. Add a dummy pmu::read() to avoid
any issues.
Fixes:
ff0de066b463 ("hwtracing: hisi_ptt: Add trace function support for HiSilicon PCIe Tune and Trace device")
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20231010084731.30450-6-yangyicong@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Uwe Kleine-König [Fri, 29 Sep 2023 08:16:37 +0000 (10:16 +0200)]
coresight: etm4x: Remove bogous __exit annotation for some functions
[ Upstream commit
348ddab81f7b0983d9fb158df910254f08d3f887 ]
etm4_platform_driver (which lives in ".data" contains a reference to
etm4_remove_platform_dev(). So the latter must not be marked with __exit
which results in the function being discarded for a build with
CONFIG_CORESIGHT_SOURCE_ETM4X=y which in turn makes the remove pointer
contain invalid data.
etm4x_amba_driver referencing etm4_remove_amba() has the same issue.
Drop the __exit annotations for the two affected functions and a third
one that is called by the other two.
For reasons I don't understand this isn't catched by building with
CONFIG_DEBUG_SECTION_MISMATCH=y.
Fixes:
c23bc382ef0e ("coresight: etm4x: Refactor probing routine")
Fixes:
5214b563588e ("coresight: etm4x: Add support for sysreg only devices")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/all/20230929081540.yija47lsj35xtj4v@pengutronix.de/
Link: https://lore.kernel.org/r/20230929081637.2377335-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Uwe Kleine-König [Thu, 18 May 2023 20:16:29 +0000 (22:16 +0200)]
coresight: etm4x: Make etm4_remove_dev() return void
[ Upstream commit
c5f231f1a7e18d28e02b282d33541d31358360e4 ]
etm4_remove_dev() returned zero unconditionally. Make it return void
instead, which makes it clear in the callers that there is no error to
handle. Simplify etm4_remove_platform_dev() accordingly.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230518201629.260672-1-u.kleine-koenig@pengutronix.de
Stable-dep-of:
348ddab81f7b ("coresight: etm4x: Remove bogous __exit annotation for some functions")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Carlos Llamas [Fri, 8 Dec 2023 03:49:23 +0000 (03:49 +0000)]
binder: fix memory leaks of spam and pending work
commit
1aa3aaf8953c84bad398adf6c3cabc9d6685bf7d upstream
A transaction complete work is allocated and queued for each
transaction. Under certain conditions the work->type might be marked as
BINDER_WORK_TRANSACTION_ONEWAY_SPAM_SUSPECT to notify userspace about
potential spamming threads or as BINDER_WORK_TRANSACTION_PENDING when
the target is currently frozen.
However, these work types are not being handled in binder_release_work()
so they will leak during a cleanup. This was reported by syzkaller with
the following kmemleak dump:
BUG: memory leak
unreferenced object 0xffff88810e2d6de0 (size 32):
comm "syz-executor338", pid 5046, jiffies
4294968230 (age 13.590s)
hex dump (first 32 bytes):
e0 6d 2d 0e 81 88 ff ff e0 6d 2d 0e 81 88 ff ff .m-......m-.....
04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<
ffffffff81573b75>] kmalloc_trace+0x25/0x90 mm/slab_common.c:1114
[<
ffffffff83d41873>] kmalloc include/linux/slab.h:599 [inline]
[<
ffffffff83d41873>] kzalloc include/linux/slab.h:720 [inline]
[<
ffffffff83d41873>] binder_transaction+0x573/0x4050 drivers/android/binder.c:3152
[<
ffffffff83d45a05>] binder_thread_write+0x6b5/0x1860 drivers/android/binder.c:4010
[<
ffffffff83d486dc>] binder_ioctl_write_read drivers/android/binder.c:5066 [inline]
[<
ffffffff83d486dc>] binder_ioctl+0x1b2c/0x3cf0 drivers/android/binder.c:5352
[<
ffffffff816b25f2>] vfs_ioctl fs/ioctl.c:51 [inline]
[<
ffffffff816b25f2>] __do_sys_ioctl fs/ioctl.c:871 [inline]
[<
ffffffff816b25f2>] __se_sys_ioctl fs/ioctl.c:857 [inline]
[<
ffffffff816b25f2>] __x64_sys_ioctl+0xf2/0x140 fs/ioctl.c:857
[<
ffffffff84b30008>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<
ffffffff84b30008>] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
[<
ffffffff84c0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fix the leaks by kfreeing these work types in binder_release_work() and
handle them as a BINDER_WORK_TRANSACTION_COMPLETE cleanup.
Cc: stable@vger.kernel.org
Fixes:
a7dc1e6f99df ("binder: tell userspace to dump current backtrace when detected oneway spamming")
Reported-by: syzbot+7f10c1653e35933c0f1e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=
7f10c1653e35933c0f1e
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Todd Kjos <tkjos@google.com>
Link: https://lore.kernel.org/r/20230922175138.230331-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[cmllamas: backport to v6.1 by dropping BINDER_WORK_TRANSACTION_PENDING
as commit
0567461a7a6e is not present. Remove fixes tag accordingly.]
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
AngeloGioacchino Del Regno [Wed, 25 Oct 2023 09:38:14 +0000 (11:38 +0200)]
arm64: dts: mediatek: mt8183-evb: Fix unit_address_vs_reg warning on ntc
commit
9dea1c724fc36643e83216c1f5a26613412150db upstream.
The NTC is defined as ntc@0 but it doesn't need any address at all.
Fix the unit_address_vs_reg warning by dropping the unit address: since
the node name has to be generic also fully rename it from ntc@0 to
thermal-sensor.
Cc: stable@vger.kernel.org
Fixes:
ff9ea5c62279 ("arm64: dts: mediatek: mt8183-evb: Add node for thermistor")
Link: https://lore.kernel.org/r/20231025093816.44327-7-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
AngeloGioacchino Del Regno [Wed, 25 Oct 2023 09:38:16 +0000 (11:38 +0200)]
arm64: dts: mediatek: mt8183: Move thermal-zones to the root node
commit
5a60d63439694590cd5ab1f998fc917ff7ba1c1d upstream.
The thermal zones are not a soc bus device: move it to the root
node to solve simple_bus_reg warnings.
Cc: stable@vger.kernel.org
Fixes:
b325ce39785b ("arm64: dts: mt8183: add thermal zone node")
Link: https://lore.kernel.org/r/20231025093816.44327-9-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
AngeloGioacchino Del Regno [Wed, 25 Oct 2023 09:38:13 +0000 (11:38 +0200)]
arm64: dts: mediatek: mt8183: Fix unit address for scp reserved memory
commit
19cba9a6c071db57888dc6b2ec1d9bf8996ea681 upstream.
The reserved memory for scp had node name "scp_mem_region" and also
without unit-address: change the name to "memory@(address)".
This fixes a unit_address_vs_reg warning.
Cc: stable@vger.kernel.org
Fixes:
1652dbf7363a ("arm64: dts: mt8183: add scp node")
Link: https://lore.kernel.org/r/20231025093816.44327-6-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
AngeloGioacchino Del Regno [Thu, 6 Jul 2023 09:58:41 +0000 (11:58 +0200)]
arm64: dts: mediatek: mt8195: Fix PM suspend/resume with venc clocks
commit
61b94d54421a1f3670ddd5396ec70afe833e9405 upstream.
Before suspending the LARBs we're making sure that any operation is
done: this never happens because we are unexpectedly unclocking the
LARB20 before executing the suspend handler for the MediaTek Smart
Multimedia Interface (SMI) and the cause of this is incorrect clocks
on this LARB.
Fix this issue by changing the Local Arbiter 20 (used by the video
encoder secondary core) apb clock to CLK_VENC_CORE1_VENC;
furthermore, in order to make sure that both the PM resume and video
encoder operation is stable, add the CLK_VENC(_CORE1)_LARB clock to
the VENC (main core) and VENC_CORE1 power domains, as this IP cannot
communicate with the rest of the system (the AP) without local
arbiter clocks being operational.
Cc: stable@vger.kernel.org
Fixes:
3b5838d1d82e ("arm64: dts: mt8195: Add iommu and smi nodes")
Fixes:
2b515194bf0c ("arm64: dts: mt8195: Add power domains controller")
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230706095841.109315-1-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
AngeloGioacchino Del Regno [Wed, 25 Oct 2023 09:38:15 +0000 (11:38 +0200)]
arm64: dts: mediatek: mt8173-evb: Fix regulator-fixed node names
commit
24165c5dad7ba7c7624d05575a5e0cc851396c71 upstream.
Fix a unit_address_vs_reg warning for the USB VBUS fixed regulators
by renaming the regulator nodes from regulator@{0,1} to regulator-usb-p0
and regulator-usb-p1.
Cc: stable@vger.kernel.org
Fixes:
c0891284a74a ("arm64: dts: mediatek: add USB3 DRD driver")
Link: https://lore.kernel.org/r/20231025093816.44327-8-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
AngeloGioacchino Del Regno [Mon, 27 Nov 2023 13:20:26 +0000 (14:20 +0100)]
arm64: dts: mediatek: cherry: Fix interrupt cells for MT6360 on I2C7
commit
5943b8f7449df9881b273db07bdde1e7120dccf0 upstream.
Change interrupt cells to 2 to suppress interrupts_property warning.
Cc: stable@vger.kernel.org
Fixes:
0de0fe950f1b ("arm64: dts: mediatek: cherry: Enable MT6360 sub-pmic on I2C7")
Link: https://lore.kernel.org/r/20231127132026.165027-1-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eugen Hristev [Mon, 14 Aug 2023 07:10:53 +0000 (10:10 +0300)]
arm64: dts: mediatek: mt8183-kukui-jacuzzi: fix dsi unnecessary cells properties
commit
74543b303a9abfe4fa253d1fa215281baa05ff3a upstream.
dtbs_check throws a warning at the dsi node:
Warning (avoid_unnecessary_addr_size): /soc/dsi@
14014000: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Other DTS have a panel child node with a reg, so the parent dtsi
must have the address-cells and size-cells, however this specific DT
has the panel removed, but not the cells, hence the warning above.
If panel is deleted then the cells must also be deleted since they are
tied together, as the child node in this DT does not have a reg.
Cc: stable@vger.kernel.org
Fixes:
cabc71b08eb5 ("arm64: dts: mt8183: Add kukui-jacuzzi-damu board")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230814071053.5459-1-eugen.hristev@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eugen Hristev [Mon, 14 Aug 2023 06:50:42 +0000 (09:50 +0300)]
arm64: dts: mediatek: mt7622: fix memory node warning check
commit
8e6ecbfd44b5542a7598c1c5fc9c6dcb5d367f2a upstream.
dtbs_check throws a warning at the memory node:
Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name
fix by adding the address into the node name.
Cc: stable@vger.kernel.org
Fixes:
0b6286dd96c0 ("arm64: dts: mt7622: add bananapi BPI-R64 board")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230814065042.4973-1-eugen.hristev@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Jeffery [Tue, 28 Nov 2023 18:11:39 +0000 (13:11 -0500)]
md/raid6: use valid sector values to determine if an I/O should wait on the reshape
commit
c467e97f079f0019870c314996fae952cc768e82 upstream.
During a reshape or a RAID6 array such as expanding by adding an additional
disk, I/Os to the region of the array which have not yet been reshaped can
stall indefinitely. This is from errors in the stripe_ahead_of_reshape
function causing md to think the I/O is to a region in the actively
undergoing the reshape.
stripe_ahead_of_reshape fails to account for the q disk having a sector
value of 0. By not excluding the q disk from the for loop, raid6 will always
generate a min_sector value of 0, causing a return value which stalls.
The function's max_sector calculation also uses min() when it should use
max(), causing the max_sector value to always be 0. During a backwards
rebuild this can cause the opposite problem where it allows I/O to advance
when it should wait.
Fixing these errors will allow safe I/O to advance in a timely manner and
delay only I/O which is unsafe due to stripes in the middle of undergoing
the reshape.
Fixes:
486f60558607 ("md/raid5: Check all disks in a stripe_head for reshape progress")
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: David Jeffery <djeffery@redhat.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231128181233.6187-1-djeffery@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lukasz Luba [Fri, 1 Dec 2023 12:32:05 +0000 (12:32 +0000)]
powercap: DTPM: Fix missing cpufreq_cpu_put() calls
commit
bdefd9913bdd453991ef756b6f7176e8ad80d786 upstream.
The policy returned by cpufreq_cpu_get() has to be released with
the help of cpufreq_cpu_put() to balance its kobject reference counter
properly.
Add the missing calls to cpufreq_cpu_put() in the code.
Fixes:
0aea2e4ec2a2 ("powercap/dtpm_cpu: Reset per_cpu variable in the release function")
Fixes:
0e8f68d7f048 ("powercap/drivers/dtpm: Add CPU energy model based support")
Cc: v5.16+ <stable@vger.kernel.org> # v5.16+
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hugh Dickins [Fri, 17 Nov 2023 08:49:18 +0000 (00:49 -0800)]
mm: fix oops when filemap_map_pmd() without prealloc_pte
commit
9aa1345d66b8132745ffb99b348b1492088da9e2 upstream.
syzbot reports oops in lockdep's __lock_acquire(), called from
__pte_offset_map_lock() called from filemap_map_pages(); or when I run the
repro, the oops comes in pmd_install(), called from filemap_map_pmd()
called from filemap_map_pages(), just before the __pte_offset_map_lock().
The problem is that filemap_map_pmd() has been assuming that when it finds
pmd_none(), a page table has already been prepared in prealloc_pte; and
indeed do_fault_around() has been careful to preallocate one there, when
it finds pmd_none(): but what if *pmd became none in between?
My 6.6 mods in mm/khugepaged.c, avoiding mmap_lock for write, have made it
easy for *pmd to be cleared while servicing a page fault; but even before
those, a huge *pmd might be zapped while a fault is serviced.
The difference in symptomatic stack traces comes from the "memory model"
in use: pmd_install() uses pmd_populate() uses page_to_pfn(): in some
models that is strict, and will oops on the NULL prealloc_pte; in other
models, it will construct a bogus value to be populated into *pmd, then
__pte_offset_map_lock() oops when trying to access split ptlock pointer
(or some other symptom in normal case of ptlock embedded not pointer).
Link: https://lore.kernel.org/linux-mm/20231115065506.19780-1-jose.pekkarinen@foxhound.fi/
Link: https://lkml.kernel.org/r/6ed0c50c-78ef-0719-b3c5-60c0c010431c@google.com
Fixes:
f9ce0be71d1f ("mm: Cleanup faultaround and finish_fault() codepaths")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-and-tested-by: syzbot+89edd67979b52675ddec@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-mm/
0000000000005e44550608a0806c@google.com/
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>,
Cc: José Pekkarinen <jose.pekkarinen@foxhound.fi>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org> [5.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Kravetz [Tue, 14 Nov 2023 01:20:33 +0000 (17:20 -0800)]
hugetlb: fix null-ptr-deref in hugetlb_vma_lock_write
commit
187da0f8250aa94bd96266096aef6f694e0b4cd2 upstream.
The routine __vma_private_lock tests for the existence of a reserve map
associated with a private hugetlb mapping. A pointer to the reserve map
is in vma->vm_private_data. __vma_private_lock was checking the pointer
for NULL. However, it is possible that the low bits of the pointer could
be used as flags. In such instances, vm_private_data is not NULL and not
a valid pointer. This results in the null-ptr-deref reported by syzbot:
general protection fault, probably for non-canonical address 0xdffffc000000001d:
0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000000e8-0x00000000000000ef]
CPU: 0 PID: 5048 Comm: syz-executor139 Not tainted 6.6.0-rc7-syzkaller-00142-g88
8cf78c29e2 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 1
0/09/2023
RIP: 0010:__lock_acquire+0x109/0x5de0 kernel/locking/lockdep.c:5004
...
Call Trace:
<TASK>
lock_acquire kernel/locking/lockdep.c:5753 [inline]
lock_acquire+0x1ae/0x510 kernel/locking/lockdep.c:5718
down_write+0x93/0x200 kernel/locking/rwsem.c:1573
hugetlb_vma_lock_write mm/hugetlb.c:300 [inline]
hugetlb_vma_lock_write+0xae/0x100 mm/hugetlb.c:291
__hugetlb_zap_begin+0x1e9/0x2b0 mm/hugetlb.c:5447
hugetlb_zap_begin include/linux/hugetlb.h:258 [inline]
unmap_vmas+0x2f4/0x470 mm/memory.c:1733
exit_mmap+0x1ad/0xa60 mm/mmap.c:3230
__mmput+0x12a/0x4d0 kernel/fork.c:1349
mmput+0x62/0x70 kernel/fork.c:1371
exit_mm kernel/exit.c:567 [inline]
do_exit+0x9ad/0x2a20 kernel/exit.c:861
__do_sys_exit kernel/exit.c:991 [inline]
__se_sys_exit kernel/exit.c:989 [inline]
__x64_sys_exit+0x42/0x50 kernel/exit.c:989
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Mask off low bit flags before checking for NULL pointer. In addition, the
reserve map only 'belongs' to the OWNER (parent in parent/child
relationships) so also check for the OWNER flag.
Link: https://lkml.kernel.org/r/20231114012033.259600-1-mike.kravetz@oracle.com
Reported-by: syzbot+6ada951e7c0f7bc8a71e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-mm/
00000000000078d1e00608d7878b@google.com/
Fixes:
bf4916922c60 ("hugetlbfs: extend hugetlb_vma_lock to private VMAs")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Rik van Riel <riel@surriel.com>
Cc: Edward Adam Davis <eadavis@qq.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Tom Rix <trix@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Francesco Dolcini [Tue, 28 Nov 2023 19:49:35 +0000 (20:49 +0100)]
platform/surface: aggregator: fix recv_buf() return value
commit
c8820c92caf0770bec976b01fa9e82bb993c5865 upstream.
Serdev recv_buf() callback is supposed to return the amount of bytes
consumed, therefore an int in between 0 and count.
Do not return negative number in case of issue, when
ssam_controller_receive_buf() returns ESHUTDOWN just returns 0, e.g. no
bytes consumed, this keep the exact same behavior as it was before.
This fixes a potential WARN in serdev-ttyport.c:ttyport_receive_buf().
Fixes:
c167b9c7e3d6 ("platform/surface: Add Surface Aggregator subsystem")
Cc: stable@vger.kernel.org
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20231128194935.11350-1-francesco@dolcini.it
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Reichl [Sun, 3 Dec 2023 22:22:16 +0000 (23:22 +0100)]
regmap: fix bogus error on regcache_sync success
commit
fea88064445a59584460f7f67d102b6e5fc1ca1d upstream.
Since commit
0ec7731655de ("regmap: Ensure range selector registers
are updated after cache sync") opening pcm512x based soundcards fail
with EINVAL and dmesg shows sync cache and pm_runtime_get errors:
[ 228.794676] pcm512x 1-004c: Failed to sync cache: -22
[ 228.794740] pcm512x 1-004c: ASoC: error at snd_soc_pcm_component_pm_runtime_get on pcm512x.1-004c: -22
This is caused by the cache check result leaking out into the
regcache_sync return value.
Fix this by making the check local-only, as the comment above the
regcache_read call states a non-zero return value means there's
nothing to do so the return value should not be altered.
Fixes:
0ec7731655de ("regmap: Ensure range selector registers are updated after cache sync")
Cc: stable@vger.kernel.org
Signed-off-by: Matthias Reichl <hias@horus.com>
Link: https://lore.kernel.org/r/20231203222216.96547-1-hias@horus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ChunHao Lin [Wed, 29 Nov 2023 15:53:50 +0000 (23:53 +0800)]
r8169: fix rtl8125b PAUSE frames blasting when suspended
commit
4b0768b6556af56ee9b7cf4e68452a2b6289ae45 upstream.
When FIFO reaches near full state, device will issue pause frame.
If pause slot is enabled(set to 1), in this time, device will issue
pause frame only once. But if pause slot is disabled(set to 0), device
will keep sending pause frames until FIFO reaches near empty state.
When pause slot is disabled, if there is no one to handle receive
packets, device FIFO will reach near full state and keep sending
pause frames. That will impact entire local area network.
This issue can be reproduced in Chromebox (not Chromebook) in
developer mode running a test image (and v5.10 kernel):
1) ping -f $CHROMEBOX (from workstation on same local network)
2) run "powerd_dbus_suspend" from command line on the $CHROMEBOX
3) ping $ROUTER (wait until ping fails from workstation)
Takes about ~20-30 seconds after step 2 for the local network to
stop working.
Fix this issue by enabling pause slot to only send pause frame once
when FIFO reaches near full state.
Fixes:
f1bce4ad2f1c ("r8169: add support for RTL8125")
Reported-by: Grant Grundler <grundler@chromium.org>
Tested-by: Grant Grundler <grundler@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: ChunHao Lin <hau@realtek.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/20231129155350.5843-1-hau@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Borkmann [Fri, 1 Dec 2023 13:10:21 +0000 (14:10 +0100)]
packet: Move reference count in packet_sock to atomic_long_t
commit
db3fadacaf0c817b222090290d06ca2a338422d0 upstream.
In some potential instances the reference count on struct packet_sock
could be saturated and cause overflows which gets the kernel a bit
confused. To prevent this, move to a 64-bit atomic reference count on
64-bit architectures to prevent the possibility of this type to overflow.
Because we can not handle saturation, using refcount_t is not possible
in this place. Maybe someday in the future if it changes it could be
used. Also, instead of using plain atomic64_t, use atomic_long_t instead.
32-bit machines tend to be memory-limited (i.e. anything that increases
a reference uses so much memory that you can't actually get to 2**32
references). 32-bit architectures also tend to have serious problems
with 64-bit atomics. Hence, atomic_long_t is the more natural solution.
Reported-by: "The UK's National Cyber Security Centre (NCSC)" <security@ncsc.gov.uk>
Co-developed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@kernel.org
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231201131021.19999-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Petr Pavlu [Tue, 5 Dec 2023 16:17:36 +0000 (17:17 +0100)]
tracing: Fix a possible race when disabling buffered events
commit
c0591b1cccf708a47bc465c62436d669a4213323 upstream.
Function trace_buffered_event_disable() is responsible for freeing pages
backing buffered events and this process can run concurrently with
trace_event_buffer_lock_reserve().
The following race is currently possible:
* Function trace_buffered_event_disable() is called on CPU 0. It
increments trace_buffered_event_cnt on each CPU and waits via
synchronize_rcu() for each user of trace_buffered_event to complete.
* After synchronize_rcu() is finished, function
trace_buffered_event_disable() has the exclusive access to
trace_buffered_event. All counters trace_buffered_event_cnt are at 1
and all pointers trace_buffered_event are still valid.
* At this point, on a different CPU 1, the execution reaches
trace_event_buffer_lock_reserve(). The function calls
preempt_disable_notrace() and only now enters an RCU read-side
critical section. The function proceeds and reads a still valid
pointer from trace_buffered_event[CPU1] into the local variable
"entry". However, it doesn't yet read trace_buffered_event_cnt[CPU1]
which happens later.
* Function trace_buffered_event_disable() continues. It frees
trace_buffered_event[CPU1] and decrements
trace_buffered_event_cnt[CPU1] back to 0.
* Function trace_event_buffer_lock_reserve() continues. It reads and
increments trace_buffered_event_cnt[CPU1] from 0 to 1. This makes it
believe that it can use the "entry" that it already obtained but the
pointer is now invalid and any access results in a use-after-free.
Fix the problem by making a second synchronize_rcu() call after all
trace_buffered_event values are set to NULL. This waits on all potential
users in trace_event_buffer_lock_reserve() that still read a previous
pointer from trace_buffered_event.
Link: https://lore.kernel.org/all/20231127151248.7232-2-petr.pavlu@suse.com/
Link: https://lkml.kernel.org/r/20231205161736.19663-4-petr.pavlu@suse.com
Cc: stable@vger.kernel.org
Fixes:
0fc1b09ff1ff ("tracing: Use temp buffer when filtering events")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Petr Pavlu [Tue, 5 Dec 2023 16:17:34 +0000 (17:17 +0100)]
tracing: Fix incomplete locking when disabling buffered events
commit
7fed14f7ac9cf5e38c693836fe4a874720141845 upstream.
The following warning appears when using buffered events:
[ 203.556451] WARNING: CPU: 53 PID: 10220 at kernel/trace/ring_buffer.c:3912 ring_buffer_discard_commit+0x2eb/0x420
[...]
[ 203.670690] CPU: 53 PID: 10220 Comm: stress-ng-sysin Tainted: G E 6.7.0-rc2-default #4
56e6d0fcf5581e6e51eaaecbdaec2a2338c80f3a
[ 203.670704] Hardware name: Intel Corp. GROVEPORT/GROVEPORT, BIOS GVPRCRB1.86B.0016.D04.
1705030402 05/03/2017
[ 203.670709] RIP: 0010:ring_buffer_discard_commit+0x2eb/0x420
[ 203.735721] Code: 4c 8b 4a 50 48 8b 42 48 49 39 c1 0f 84 b3 00 00 00 49 83 e8 01 75 b1 48 8b 42 10 f0 ff 40 08 0f 0b e9 fc fe ff ff f0 ff 47 08 <0f> 0b e9 77 fd ff ff 48 8b 42 10 f0 ff 40 08 0f 0b e9 f5 fe ff ff
[ 203.735734] RSP: 0018:
ffffb4ae4f7b7d80 EFLAGS:
00010202
[ 203.735745] RAX:
0000000000000000 RBX:
ffffb4ae4f7b7de0 RCX:
ffff8ac10662c000
[ 203.735754] RDX:
ffff8ac0c750be00 RSI:
ffff8ac10662c000 RDI:
ffff8ac0c004d400
[ 203.781832] RBP:
ffff8ac0c039cea0 R08:
0000000000000000 R09:
0000000000000000
[ 203.781839] R10:
0000000000000000 R11:
0000000000000000 R12:
0000000000000000
[ 203.781842] R13:
ffff8ac10662c000 R14:
ffff8ac0c004d400 R15:
ffff8ac10662c008
[ 203.781846] FS:
00007f4cd8a67740(0000) GS:
ffff8ad798880000(0000) knlGS:
0000000000000000
[ 203.781851] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 203.781855] CR2:
0000559766a74028 CR3:
00000001804c4000 CR4:
00000000001506f0
[ 203.781862] Call Trace:
[ 203.781870] <TASK>
[ 203.851949] trace_event_buffer_commit+0x1ea/0x250
[ 203.851967] trace_event_raw_event_sys_enter+0x83/0xe0
[ 203.851983] syscall_trace_enter.isra.0+0x182/0x1a0
[ 203.851990] do_syscall_64+0x3a/0xe0
[ 203.852075] entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 203.852090] RIP: 0033:0x7f4cd870fa77
[ 203.982920] Code: 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 90 b8 89 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e9 43 0e 00 f7 d8 64 89 01 48
[ 203.982932] RSP: 002b:
00007fff99717dd8 EFLAGS:
00000246 ORIG_RAX:
0000000000000089
[ 203.982942] RAX:
ffffffffffffffda RBX:
0000558ea1d7b6f0 RCX:
00007f4cd870fa77
[ 203.982948] RDX:
0000000000000000 RSI:
00007fff99717de0 RDI:
0000558ea1d7b6f0
[ 203.982957] RBP:
00007fff99717de0 R08:
00007fff997180e0 R09:
00007fff997180e0
[ 203.982962] R10:
00007fff997180e0 R11:
0000000000000246 R12:
00007fff99717f40
[ 204.049239] R13:
00007fff99718590 R14:
0000558e9f2127a8 R15:
00007fff997180b0
[ 204.049256] </TASK>
For instance, it can be triggered by running these two commands in
parallel:
$ while true; do
echo hist:key=id.syscall:val=hitcount > \
/sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/trigger;
done
$ stress-ng --sysinfo $(nproc)
The warning indicates that the current ring_buffer_per_cpu is not in the
committing state. It happens because the active ring_buffer_event
doesn't actually come from the ring_buffer_per_cpu but is allocated from
trace_buffered_event.
The bug is in function trace_buffered_event_disable() where the
following normally happens:
* The code invokes disable_trace_buffered_event() via
smp_call_function_many() and follows it by synchronize_rcu(). This
increments the per-CPU variable trace_buffered_event_cnt on each
target CPU and grants trace_buffered_event_disable() the exclusive
access to the per-CPU variable trace_buffered_event.
* Maintenance is performed on trace_buffered_event, all per-CPU event
buffers get freed.
* The code invokes enable_trace_buffered_event() via
smp_call_function_many(). This decrements trace_buffered_event_cnt and
releases the access to trace_buffered_event.
A problem is that smp_call_function_many() runs a given function on all
target CPUs except on the current one. The following can then occur:
* Task X executing trace_buffered_event_disable() runs on CPU 0.
* The control reaches synchronize_rcu() and the task gets rescheduled on
another CPU 1.
* The RCU synchronization finishes. At this point,
trace_buffered_event_disable() has the exclusive access to all
trace_buffered_event variables except trace_buffered_event[CPU0]
because trace_buffered_event_cnt[CPU0] is never incremented and if the
buffer is currently unused, remains set to 0.
* A different task Y is scheduled on CPU 0 and hits a trace event. The
code in trace_event_buffer_lock_reserve() sees that
trace_buffered_event_cnt[CPU0] is set to 0 and decides the use the
buffer provided by trace_buffered_event[CPU0].
* Task X continues its execution in trace_buffered_event_disable(). The
code incorrectly frees the event buffer pointed by
trace_buffered_event[CPU0] and resets the variable to NULL.
* Task Y writes event data to the now freed buffer and later detects the
created inconsistency.
The issue is observable since commit
dea499781a11 ("tracing: Fix warning
in trace_buffered_event_disable()") which moved the call of
trace_buffered_event_disable() in __ftrace_event_enable_disable()
earlier, prior to invoking call->class->reg(.. TRACE_REG_UNREGISTER ..).
The underlying problem in trace_buffered_event_disable() is however
present since the original implementation in commit
0fc1b09ff1ff
("tracing: Use temp buffer when filtering events").
Fix the problem by replacing the two smp_call_function_many() calls with
on_each_cpu_mask() which invokes a given callback on all CPUs.
Link: https://lore.kernel.org/all/20231127151248.7232-2-petr.pavlu@suse.com/
Link: https://lkml.kernel.org/r/20231205161736.19663-2-petr.pavlu@suse.com
Cc: stable@vger.kernel.org
Fixes:
0fc1b09ff1ff ("tracing: Use temp buffer when filtering events")
Fixes:
dea499781a11 ("tracing: Fix warning in trace_buffered_event_disable()")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt (Google) [Tue, 5 Dec 2023 21:52:11 +0000 (16:52 -0500)]
tracing: Disable snapshot buffer when stopping instance tracers
commit
b538bf7d0ec11ca49f536dfda742a5f6db90a798 upstream.
It use to be that only the top level instance had a snapshot buffer (for
latency tracers like wakeup and irqsoff). When stopping a tracer in an
instance would not disable the snapshot buffer. This could have some
unintended consequences if the irqsoff tracer is enabled.
Consolidate the tracing_start/stop() with tracing_start/stop_tr() so that
all instances behave the same. The tracing_start/stop() functions will
just call their respective tracing_start/stop_tr() with the global_array
passed in.
Link: https://lkml.kernel.org/r/20231205220011.041220035@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes:
6d9b3fa5e7f6 ("tracing: Move tracing_max_latency into trace_array")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt (Google) [Tue, 5 Dec 2023 21:52:09 +0000 (16:52 -0500)]
tracing: Always update snapshot buffer size
commit
7be76461f302ec05cbd62b90b2a05c64299ca01f upstream.
It use to be that only the top level instance had a snapshot buffer (for
latency tracers like wakeup and irqsoff). The update of the ring buffer
size would check if the instance was the top level and if so, it would
also update the snapshot buffer as it needs to be the same as the main
buffer.
Now that lower level instances also has a snapshot buffer, they too need
to update their snapshot buffer sizes when the main buffer is changed,
otherwise the following can be triggered:
# cd /sys/kernel/tracing
# echo 1500 > buffer_size_kb
# mkdir instances/foo
# echo irqsoff > instances/foo/current_tracer
# echo 1000 > instances/foo/buffer_size_kb
Produces:
WARNING: CPU: 2 PID: 856 at kernel/trace/trace.c:1938 update_max_tr_single.part.0+0x27d/0x320
Which is:
ret = ring_buffer_swap_cpu(tr->max_buffer.buffer, tr->array_buffer.buffer, cpu);
if (ret == -EBUSY) {
[..]
}
WARN_ON_ONCE(ret && ret != -EAGAIN && ret != -EBUSY); <== here
That's because ring_buffer_swap_cpu() has:
int ret = -EINVAL;
[..]
/* At least make sure the two buffers are somewhat the same */
if (cpu_buffer_a->nr_pages != cpu_buffer_b->nr_pages)
goto out;
[..]
out:
return ret;
}
Instead, update all instances' snapshot buffer sizes when their main
buffer size is updated.
Link: https://lkml.kernel.org/r/20231205220010.454662151@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes:
6d9b3fa5e7f6 ("tracing: Move tracing_max_latency into trace_array")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Heiko Carstens [Mon, 20 Nov 2023 18:37:17 +0000 (19:37 +0100)]
checkstack: fix printed address
commit
ee34db3f271cea4d4252048617919c2caafe698b upstream.
All addresses printed by checkstack have an extra incorrect 0 appended at
the end.
This was introduced with commit
677f1410e058 ("scripts/checkstack.pl: don't
display $dre as different entity"): since then the address is taken from
the line which contains the function name, instead of the line which
contains stack consumption. E.g. on s390:
0000000000100a30 <do_one_initcall>:
...
100a44: e3 f0 ff 70 ff 71 lay %r15,-144(%r15)
So the used regex which matches spaces and hexadecimal numbers to extract
an address now matches a different substring. Subsequently replacing spaces
with 0 appends a zero at the and, instead of replacing leading spaces.
Fix this by using the proper regex, and simplify the code a bit.
Link: https://lkml.kernel.org/r/20231120183719.2188479-2-hca@linux.ibm.com
Fixes:
677f1410e058 ("scripts/checkstack.pl: don't display $dre as different entity")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Maninder Singh <maninder1.s@samsung.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Vaneet Narang <v.narang@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tim Van Patten [Wed, 15 Nov 2023 16:20:43 +0000 (09:20 -0700)]
cgroup_freezer: cgroup_freezing: Check if not frozen
commit
cff5f49d433fcd0063c8be7dd08fa5bf190c6c37 upstream.
__thaw_task() was recently updated to warn if the task being thawed was
part of a freezer cgroup that is still currently freezing:
void __thaw_task(struct task_struct *p)
{
...
if (WARN_ON_ONCE(freezing(p)))
goto unlock;
This has exposed a bug in cgroup1 freezing where when CGROUP_FROZEN is
asserted, the CGROUP_FREEZING bits are not also cleared at the same
time. Meaning, when a cgroup is marked FROZEN it continues to be marked
FREEZING as well. This causes the WARNING to trigger, because
cgroup_freezing() thinks the cgroup is still freezing.
There are two ways to fix this:
1. Whenever FROZEN is set, clear FREEZING for the cgroup and all
children cgroups.
2. Update cgroup_freezing() to also verify that FROZEN is not set.
This patch implements option (2), since it's smaller and more
straightforward.
Signed-off-by: Tim Van Patten <timvp@google.com>
Tested-by: Mark Hasemeyer <markhas@chromium.org>
Fixes:
f5d39b020809 ("freezer,sched: Rewrite core freezer logic")
Cc: stable@vger.kernel.org # v6.1+
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ryusuke Konishi [Tue, 5 Dec 2023 08:59:47 +0000 (17:59 +0900)]
nilfs2: prevent WARNING in nilfs_sufile_set_segment_usage()
commit
675abf8df1353e0e3bde314993e0796c524cfbf0 upstream.
If nilfs2 reads a disk image with corrupted segment usage metadata, and
its segment usage information is marked as an error for the segment at the
write location, nilfs_sufile_set_segment_usage() can trigger WARN_ONs
during log writing.
Segments newly allocated for writing with nilfs_sufile_alloc() will not
have this error flag set, but this unexpected situation will occur if the
segment indexed by either nilfs->ns_segnum or nilfs->ns_nextnum (active
segment) was marked in error.
Fix this issue by inserting a sanity check to treat it as a file system
corruption.
Since error returns are not allowed during the execution phase where
nilfs_sufile_set_segment_usage() is used, this inserts the sanity check
into nilfs_sufile_mark_dirty() which pre-reads the buffer containing the
segment usage record to be updated and sets it up in a dirty state for
writing.
In addition, nilfs_sufile_set_segment_usage() is also called when
canceling log writing and undoing segment usage update, so in order to
avoid issuing the same kernel warning in that case, in case of
cancellation, avoid checking the error flag in
nilfs_sufile_set_segment_usage().
Link: https://lkml.kernel.org/r/20231205085947.4431-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+14e9f834f6ddecece094@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=
14e9f834f6ddecece094
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ryusuke Konishi [Wed, 29 Nov 2023 14:15:47 +0000 (23:15 +0900)]
nilfs2: fix missing error check for sb_set_blocksize call
commit
d61d0ab573649789bf9eb909c89a1a193b2e3d10 upstream.
When mounting a filesystem image with a block size larger than the page
size, nilfs2 repeatedly outputs long error messages with stack traces to
the kernel log, such as the following:
getblk(): invalid block size 8192 requested
logical block size: 512
...
Call Trace:
dump_stack_lvl+0x92/0xd4
dump_stack+0xd/0x10
bdev_getblk+0x33a/0x354
__breadahead+0x11/0x80
nilfs_search_super_root+0xe2/0x704 [nilfs2]
load_nilfs+0x72/0x504 [nilfs2]
nilfs_mount+0x30f/0x518 [nilfs2]
legacy_get_tree+0x1b/0x40
vfs_get_tree+0x18/0xc4
path_mount+0x786/0xa88
__ia32_sys_mount+0x147/0x1a8
__do_fast_syscall_32+0x56/0xc8
do_fast_syscall_32+0x29/0x58
do_SYSENTER_32+0x15/0x18
entry_SYSENTER_32+0x98/0xf1
...
This overloads the system logger. And to make matters worse, it sometimes
crashes the kernel with a memory access violation.
This is because the return value of the sb_set_blocksize() call, which
should be checked for errors, is not checked.
The latter issue is due to out-of-buffer memory being accessed based on a
large block size that caused sb_set_blocksize() to fail for buffers read
with the initial minimum block size that remained unupdated in the
super_block structure.
Since nilfs2 mkfs tool does not accept block sizes larger than the system
page size, this has been overlooked. However, it is possible to create
this situation by intentionally modifying the tool or by passing a
filesystem image created on a system with a large page size to a system
with a smaller page size and mounting it.
Fix this issue by inserting the expected error handling for the call to
sb_set_blocksize().
Link: https://lkml.kernel.org/r/20231129141547.4726-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt (Google) [Wed, 6 Dec 2023 15:00:50 +0000 (10:00 -0500)]
ring-buffer: Test last update in 32bit version of __rb_time_read()
commit
f458a1453424e03462b5bb539673c9a3cddda480 upstream.
Since 64 bit cmpxchg() is very expensive on 32bit architectures, the
timestamp used by the ring buffer does some interesting tricks to be able
to still have an atomic 64 bit number. It originally just used 60 bits and
broke it up into two 32 bit words where the extra 2 bits were used for
synchronization. But this was not enough for all use cases, and all 64
bits were required.
The 32bit version of the ring buffer timestamp was then broken up into 3
32bit words using the same counter trick. But one update was not done. The
check to see if the read operation was done without interruption only
checked the first two words and not last one (like it had before this
update). Fix it by making sure all three updates happen without
interruption by comparing the initial counter with the last updated
counter.
Link: https://lore.kernel.org/linux-trace-kernel/20231206100050.3100b7bb@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes:
f03f2abce4f39 ("ring-buffer: Have 32 bit time stamps use all 64 bits")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mario Limonciello [Wed, 6 Dec 2023 19:39:27 +0000 (13:39 -0600)]
ALSA: hda/realtek: Add Framework laptop 16 to quirks
commit
8804fa04a492f4176ea407390052292912227820 upstream.
The Framework 16" laptop has the same controller as other Framework
models. Apply the presence detection quirk.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231206193927.2996-1-mario.limonciello@amd.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tim Bosse [Wed, 6 Dec 2023 14:26:29 +0000 (09:26 -0500)]
ALSA: hda/realtek: add new Framework laptop to quirks
commit
33038efb64f7576bac635164021f5c984d4c755f upstream.
The Framework Laptop 13 (AMD Ryzen 7040Series) has an ALC295 with
a disconnected or faulty headset mic presence detect similar to the
previous models. It works with the same quirk chain as
309d7363ca3d9fcdb92ff2d958be14d7e8707f68. This model has a VID:PID
of f111:0006.
Signed-off-by: Tim Bosse <flinn@timbos.se>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231206142629.388615-1-flinn@timbos.se
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bin Li [Mon, 4 Dec 2023 10:04:50 +0000 (18:04 +0800)]
ALSA: hda/realtek: Enable headset on Lenovo M90 Gen5
commit
6f7e4664e597440dfbdb8b2931c561b717030d07 upstream.
Lenovo M90 Gen5 is equipped with ALC897, and it needs
ALC897_FIXUP_HEADSET_MIC_PIN quirk to make its headset mic work.
Signed-off-by: Bin Li <bin.li@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231204100450.642783-1-bin.li@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason Zhang [Wed, 6 Dec 2023 01:31:39 +0000 (09:31 +0800)]
ALSA: pcm: fix out-of-bounds in snd_pcm_state_names
commit
2b3a7a302c9804e463f2ea5b54dc3a6ad106a344 upstream.
The pcm state can be SNDRV_PCM_STATE_DISCONNECTED at disconnect
callback, and there is not an entry of SNDRV_PCM_STATE_DISCONNECTED
in snd_pcm_state_names.
This patch adds the missing entry to resolve this issue.
cat /proc/asound/card2/pcm0p/sub0/status
That results in stack traces like the following:
[ 99.702732][ T5171] Unexpected kernel BRK exception at EL1
[ 99.702774][ T5171] Internal error: BRK handler:
f2005512 [#1] PREEMPT SMP
[ 99.703858][ T5171] Modules linked in: bcmdhd(E) (...)
[ 99.747425][ T5171] CPU: 3 PID: 5171 Comm: cat Tainted: G C OE 5.10.189-android13-4-00003-g4a17384380d8-
ab11086999 #1
[ 99.748447][ T5171] Hardware name: Rockchip RK3588 CVTE V10 Board (DT)
[ 99.749024][ T5171] pstate:
60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--)
[ 99.749616][ T5171] pc : snd_pcm_substream_proc_status_read+0x264/0x2bc
[ 99.750204][ T5171] lr : snd_pcm_substream_proc_status_read+0xa4/0x2bc
[ 99.750778][ T5171] sp :
ffffffc0175abae0
[ 99.751132][ T5171] x29:
ffffffc0175abb80 x28:
ffffffc009a2c498
[ 99.751665][ T5171] x27:
0000000000000001 x26:
ffffff810cbae6e8
[ 99.752199][ T5171] x25:
0000000000400cc0 x24:
ffffffc0175abc60
[ 99.752729][ T5171] x23:
0000000000000000 x22:
ffffff802f558400
[ 99.753263][ T5171] x21:
ffffff81d8d8ff00 x20:
ffffff81020cdc00
[ 99.753795][ T5171] x19:
ffffff802d110000 x18:
ffffffc014fbd058
[ 99.754326][ T5171] x17:
0000000000000000 x16:
0000000000000000
[ 99.754861][ T5171] x15:
000000000000c276 x14:
ffffffff9a976fda
[ 99.755392][ T5171] x13:
0000000065689089 x12:
000000000000d72e
[ 99.755923][ T5171] x11:
ffffff802d110000 x10:
00000000000000e0
[ 99.756457][ T5171] x9 :
9c431600c8385d00 x8 :
0000000000000008
[ 99.756990][ T5171] x7 :
0000000000000000 x6 :
000000000000003f
[ 99.757522][ T5171] x5 :
0000000000000040 x4 :
ffffffc0175abb70
[ 99.758056][ T5171] x3 :
0000000000000001 x2 :
0000000000000001
[ 99.758588][ T5171] x1 :
0000000000000000 x0 :
0000000000000000
[ 99.759123][ T5171] Call trace:
[ 99.759404][ T5171] snd_pcm_substream_proc_status_read+0x264/0x2bc
[ 99.759958][ T5171] snd_info_seq_show+0x54/0xa4
[ 99.760370][ T5171] seq_read_iter+0x19c/0x7d4
[ 99.760770][ T5171] seq_read+0xf0/0x128
[ 99.761117][ T5171] proc_reg_read+0x100/0x1f8
[ 99.761515][ T5171] vfs_read+0xf4/0x354
[ 99.761869][ T5171] ksys_read+0x7c/0x148
[ 99.762226][ T5171] __arm64_sys_read+0x20/0x30
[ 99.762625][ T5171] el0_svc_common+0xd0/0x1e4
[ 99.763023][ T5171] el0_svc+0x28/0x98
[ 99.763358][ T5171] el0_sync_handler+0x8c/0xf0
[ 99.763759][ T5171] el0_sync+0x1b8/0x1c0
[ 99.764118][ T5171] Code:
d65f03c0 b9406102 17ffffae 94191565 (
d42aa240)
[ 99.764715][ T5171] ---[ end trace
1eeffa3e17c58e10 ]---
[ 99.780720][ T5171] Kernel panic - not syncing: BRK handler: Fatal exception
Signed-off-by: Jason Zhang <jason.zhang@rock-chips.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231206013139.20506-1-jason.zhang@rock-chips.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sarah Grant [Fri, 1 Dec 2023 18:16:54 +0000 (18:16 +0000)]
ALSA: usb-audio: Add Pioneer DJM-450 mixer controls
commit
bbb8e71965c3737bdc691afd803a34bfd61cfbeb upstream.
These values mirror those of the Pioneer DJM-250MK2 as the channel layout
appears identical based on my observations. This duplication could be removed in
later contributions if desired.
Signed-off-by: Sarah Grant <s@srd.tw>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231201181654.5058-1-s@srd.tw
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pavel Begunkov [Sun, 3 Dec 2023 15:37:53 +0000 (15:37 +0000)]
io_uring: fix mutex_unlock with unreferenced ctx
commit
f7b32e785042d2357c5abc23ca6db1b92c91a070 upstream.
Callers of mutex_unlock() have to make sure that the mutex stays alive
for the whole duration of the function call. For io_uring that means
that the following pattern is not valid unless we ensure that the
context outlives the mutex_unlock() call.
mutex_lock(&ctx->uring_lock);
req_put(req); // typically via io_req_task_submit()
mutex_unlock(&ctx->uring_lock);
Most contexts are fine: io-wq pins requests, syscalls hold the file,
task works are taking ctx references and so on. However, the task work
fallback path doesn't follow the rule.
Cc: <stable@vger.kernel.org>
Fixes:
04fc6c802d ("io_uring: save ctx put/get for task_work submit")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/io-uring/CAG48ez3xSoYb+45f1RLtktROJrpiDQ1otNvdR+YLQf7m+Krj5Q@mail.gmail.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Georg Gottleuber [Wed, 20 Sep 2023 08:52:10 +0000 (10:52 +0200)]
nvme-pci: Add sleep quirk for Kingston drives
commit
107b4e063d78c300b21e2d5291b1aa94c514ea5b upstream.
Some Kingston NV1 and A2000 are wasting a lot of power on specific TUXEDO
platforms in s2idle sleep if 'Simple Suspend' is used.
This patch applies a new quirk 'Force No Simple Suspend' to achieve a
low power sleep without 'Simple Suspend'.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pavel Begunkov [Wed, 6 Dec 2023 13:26:47 +0000 (13:26 +0000)]
io_uring/af_unix: disable sending io_uring over sockets
commit
705318a99a138c29a512a72c3e0043b3cd7f55f4 upstream.
File reference cycles have caused lots of problems for io_uring
in the past, and it still doesn't work exactly right and races with
unix_stream_read_generic(). The safest fix would be to completely
disallow sending io_uring files via sockets via SCM_RIGHT, so there
are no possible cycles invloving registered files and thus rendering
SCM accounting on the io_uring side unnecessary.
Cc: <stable@vger.kernel.org>
Fixes:
0091bfc81741b ("io_uring/af_unix: defer registered files gc to io_uring release")
Reported-and-suggested-by: Jann Horn <jannh@google.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/c716c88321939156909cfa1bd8b0faaf1c804103.1701868795.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Hart [Mon, 27 Nov 2023 20:36:00 +0000 (20:36 +0000)]
ASoC: amd: yc: Fix non-functional mic on ASUS E1504FA
commit
b24e3590c94ab0aba6e455996b502a83baa5c31c upstream.
This patch adds ASUSTeK COMPUTER INC "E1504FA" to the quirks file acp6x-mach.c
to enable microphone array on ASUS Vivobook GO 15.
I have this laptop and can confirm that the patch succeeds in enabling the
microphone array.
Signed-off-by: Malcolm Hart <malcolm@5harts.com>
Cc: stable@vger.kernel.org
Rule: add
Link: https://lore.kernel.org/stable/875y1nt1bx.fsf%405harts.com
Link: https://lore.kernel.org/r/871qcbszh0.fsf@5harts.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
JP Kobryn [Fri, 1 Dec 2023 05:53:55 +0000 (14:53 +0900)]
kprobes: consistent rcu api usage for kretprobe holder
commit
d839a656d0f3caca9f96e9bf912fd394ac6a11bc upstream.
It seems that the pointer-to-kretprobe "rp" within the kretprobe_holder is
RCU-managed, based on the (non-rethook) implementation of get_kretprobe().
The thought behind this patch is to make use of the RCU API where possible
when accessing this pointer so that the needed barriers are always in place
and to self-document the code.
The __rcu annotation to "rp" allows for sparse RCU checking. Plain writes
done to the "rp" pointer are changed to make use of the RCU macro for
assignment. For the single read, the implementation of get_kretprobe()
is simplified by making use of an RCU macro which accomplishes the same,
but note that the log warning text will be more generic.
I did find that there is a difference in assembly generated between the
usage of the RCU macros vs without. For example, on arm64, when using
rcu_assign_pointer(), the corresponding store instruction is a
store-release (STLR) which has an implicit barrier. When normal assignment
is done, a regular store (STR) is found. In the macro case, this seems to
be a result of rcu_assign_pointer() using smp_store_release() when the
value to write is not NULL.
Link: https://lore.kernel.org/all/20231122132058.3359-1-inwardvessel@gmail.com/
Fixes:
d741bf41d7c7 ("kprobes: Remove kretprobe hash")
Cc: stable@vger.kernel.org
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masami Hiramatsu (Google) [Fri, 1 Dec 2023 05:53:56 +0000 (14:53 +0900)]
rethook: Use __rcu pointer for rethook::handler
commit
a1461f1fd6cfdc4b8917c9d4a91e92605d1f28dc upstream.
Since the rethook::handler is an RCU-maganged pointer so that it will
notice readers the rethook is stopped (unregistered) or not, it should
be an __rcu pointer and use appropriate functions to be accessed. This
will use appropriate memory barrier when accessing it. OTOH,
rethook::data is never changed, so we don't need to check it in
get_kretprobe().
NOTE: To avoid sparse warning, rethook::handler is defined by a raw
function pointer type with __rcu instead of rethook_handler_t.
Link: https://lore.kernel.org/all/170126066201.398836.837498688669005979.stgit@devnote2/
Fixes:
54ecbe6f1ed5 ("rethook: Add a generic return hook")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/
202311241808.rv9ceuAh-lkp@intel.com/
Tested-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robin Murphy [Wed, 15 Nov 2023 18:25:44 +0000 (18:25 +0000)]
iommu: Avoid more races around device probe
commit
a2e7e59a94269484a83386972ca07c22fd188854 upstream.
It turns out there are more subtle races beyond just the main part of
__iommu_probe_device() itself running in parallel - the dev_iommu_free()
on the way out of an unsuccessful probe can still manage to trip up
concurrent accesses to a device's fwspec. Thus, extend the scope of
iommu_probe_device_lock() to also serialise fwspec creation and initial
retrieval.
Reported-by: Zhenhua Huang <quic_zhenhuah@quicinc.com>
Link: https://lore.kernel.org/linux-iommu/e2e20e1c-6450-4ac5-9804-b0000acdf7de@quicinc.com/
Fixes:
01657bc14a39 ("iommu: Avoid races around device probe")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Tested-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/16f433658661d7cadfea51e7c65da95826112a2b.1700071477.git.robin.murphy@arm.com
Cc: stable@vger.kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yu Kuai [Tue, 5 Dec 2023 09:42:14 +0000 (17:42 +0800)]
md: don't leave 'MD_RECOVERY_FROZEN' in error path of md_set_readonly()
[ Upstream commit
c9f7cb5b2bc968adcdc686c197ed108f47fd8eb0 ]
If md_set_readonly() failed, the array could still be read-write, however
'MD_RECOVERY_FROZEN' could still be set, which leave the array in an
abnormal state that sync or recovery can't continue anymore.
Hence make sure the flag is cleared after md_set_readonly() returns.
Fixes:
88724bfa68be ("md: wait for pending superblock updates before switching to read-only")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231205094215.1824240-3-yukuai1@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ye Bin [Tue, 20 Sep 2022 02:39:38 +0000 (10:39 +0800)]
md: introduce md_ro_state
[ Upstream commit
f97a5528b21eb175d90dce2df9960c8d08e1be82 ]
Introduce md_ro_state for mddev->ro, so it is easy to understand.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Stable-dep-of:
c9f7cb5b2bc9 ("md: don't leave 'MD_RECOVERY_FROZEN' in error path of md_set_readonly()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Clément Léger [Fri, 3 Nov 2023 09:02:23 +0000 (10:02 +0100)]
riscv: fix misaligned access handling of C.SWSP and C.SDSP
[ Upstream commit
22e0eb04837a63af111fae35a92f7577676b9bc8 ]
This is a backport of a fix that was done in OpenSBI:
ec0559eb315b
("lib: sbi_misaligned_ldst: Fix handling of C.SWSP and C.SDSP").
Unlike C.LWSP/C.LDSP, these encodings can be used with the zero
register, so checking that the rs2 field is non-zero is unnecessary.
Additionally, the previous check was incorrect since it was checking
the immediate field of the instruction instead of the rs2 field.
Fixes:
956d705dd279 ("riscv: Unaligned load/store handling for M_MODE")
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Link: https://lore.kernel.org/r/20231103090223.702340-1-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fabio Estevam [Tue, 5 Dec 2023 13:27:35 +0000 (10:27 -0300)]
ARM: dts: imx28-xea: Pass the 'model' property
[ Upstream commit
63ef8fc9bcee6b73ca445a19a7ac6bd544723c9f ]
Per root-node.yaml, 'model' is a required property.
Pass it to fix the following dt-schema warning:
imx28-xea.dtb: /: 'model' is a required property
from schema $id: http://devicetree.org/schemas/root-node.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Fixes:
445ae16ac1c5 ("ARM: dts: imx28: Add DTS description of imx28 based XEA board")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Philipp Zabel [Mon, 27 Nov 2023 16:05:01 +0000 (17:05 +0100)]
ARM: dts: imx7: Declare timers compatible with fsl,imx6dl-gpt
[ Upstream commit
397caf68e2d36532054cb14ae8995537f27f8b61 ]
The timer nodes declare compatibility with "fsl,imx6sx-gpt", which
itself is compatible with "fsl,imx6dl-gpt". Switch the fallback
compatible from "fsl,imx6sx-gpt" to "fsl,imx6dl-gpt".
Fixes:
949673450291 ("ARM: dts: add imx7d soc dtsi file")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Roland Hieber <rhi@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kunwu Chan [Wed, 22 Nov 2023 06:46:36 +0000 (14:46 +0800)]
ARM: imx: Check return value of devm_kasprintf in imx_mmdc_perf_init
[ Upstream commit
1c2b1049af3f86545fcc5fae0fc725fb64b3a09e ]
devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful
by checking the pointer validity.
Release the id allocated in 'mmdc_pmu_init' when 'devm_kasprintf'
return NULL
Suggested-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Fixes:
e76bdfd7403a ("ARM: imx: Added perf functionality to mmdc driver")
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dinghao Liu [Thu, 23 Nov 2023 08:19:41 +0000 (16:19 +0800)]
scsi: be2iscsi: Fix a memleak in beiscsi_init_wrb_handle()
[ Upstream commit
235f2b548d7f4ac5931d834f05d3f7f5166a2e72 ]
When an error occurs in the for loop of beiscsi_init_wrb_handle(), we
should free phwi_ctxt->be_wrbq before returning an error code to prevent
potential memleak.
Fixes:
a7909b396ba7 ("[SCSI] be2iscsi: Fix dynamic CID allocation Mechanism in driver")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20231123081941.24854-1-dinghao.liu@zju.edu.cn
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Petr Pavlu [Tue, 5 Dec 2023 16:17:35 +0000 (17:17 +0100)]
tracing: Fix a warning when allocating buffered events fails
[ Upstream commit
34209fe83ef8404353f91ab4ea4035dbc9922d04 ]
Function trace_buffered_event_disable() produces an unexpected warning
when the previous call to trace_buffered_event_enable() fails to
allocate pages for buffered events.
The situation can occur as follows:
* The counter trace_buffered_event_ref is at 0.
* The soft mode gets enabled for some event and
trace_buffered_event_enable() is called. The function increments
trace_buffered_event_ref to 1 and starts allocating event pages.
* The allocation fails for some page and trace_buffered_event_disable()
is called for cleanup.
* Function trace_buffered_event_disable() decrements
trace_buffered_event_ref back to 0, recognizes that it was the last
use of buffered events and frees all allocated pages.
* The control goes back to trace_buffered_event_enable() which returns.
The caller of trace_buffered_event_enable() has no information that
the function actually failed.
* Some time later, the soft mode is disabled for the same event.
Function trace_buffered_event_disable() is called. It warns on
"WARN_ON_ONCE(!trace_buffered_event_ref)" and returns.
Buffered events are just an optimization and can handle failures. Make
trace_buffered_event_enable() exit on the first failure and left any
cleanup later to when trace_buffered_event_disable() is called.
Link: https://lore.kernel.org/all/20231127151248.7232-2-petr.pavlu@suse.com/
Link: https://lkml.kernel.org/r/20231205161736.19663-3-petr.pavlu@suse.com
Fixes:
0fc1b09ff1ff ("tracing: Use temp buffer when filtering events")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fabio Estevam [Sun, 5 Nov 2023 13:32:19 +0000 (10:32 -0300)]
ARM: dts: imx6ul-pico: Describe the Ethernet PHY clock
[ Upstream commit
d951f8f5f23a9417b7952f22b33784c73caa1ebb ]
Since commit
c7e73b5051d6 ("ARM: imx: mach-imx6ul: remove 14x14 EVK
specific PHY fixup")thet Ethernet PHY is no longer configured via code
in board file.
This caused Ethernet to stop working.
Fix this problem by describing the clocks and clock-names to the
Ethernet PHY node so that the KSZ8081 chip can be clocked correctly.
Fixes:
c7e73b5051d6 ("ARM: imx: mach-imx6ul: remove 14x14 EVK specific PHY fixup")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nathan Rossi [Mon, 6 Nov 2023 02:14:36 +0000 (02:14 +0000)]
arm64: dts: imx8mp: imx8mq: Add parkmode-disable-ss-quirk on DWC3
[ Upstream commit
209043cf092d7b0d4739921b3f11d6d0b451eabf ]
The i.MX8MP and i.MX8MQ devices both use the same DWC3 controller and
are both affected by a known issue with the controller due to specific
behaviour when park mode is enabled in SuperSpeed host mode operation.
Under heavy USB traffic from multiple endpoints the controller will
sometimes incorrectly process transactions such that some transactions
are lost, or the controller may hang when processing transactions. When
the controller hangs it does not recover.
This issue is documented partially within the linux-imx vendor kernel
which references a Synopsys STAR number
9001415732 in commits [1] and
additional details in [2]. Those commits provide some additional
controller internal implementation specifics around the incorrect
behaviour of the SuperSpeed host controller operation when park mode is
enabled.
The summary of this issue is that the host controller can incorrectly
enter/exit park mode such that part of the controller is in a state
which behaves as if in park mode even though it is not. In this state
the controller incorrectly calculates the number of TRBs available which
results in incorrect access of the internal caches causing the overwrite
of pending requests in the cache which should have been processed but
are ignored. This can cause the controller to drop the requests or hang
waiting for the pending state of the dropped requests.
The workaround for this issue is to disable park mode for SuperSpeed
operation of the controller through the GUCTL1[17] bit. This is already
available as a quirk for the DWC3 controller and can be enabled via the
'snps,parkmode-disable-ss-quirk' device tree property.
It is possible to replicate this failure on an i.MX8MP EVK with a USB
Hub connecting 4 SuperSpeed USB flash drives. Performing continuous
small read operations (dd if=/dev/sd... of=/dev/null bs=16) on the block
devices will result in device errors initially and will eventually
result in the controller hanging.
[13240.896936] xhci-hcd xhci-hcd.0.auto: WARN Event TRB for slot 4 ep 2 with no TDs queued?
[13240.990708] usb 2-1.3: reset SuperSpeed USB device number 5 using xhci-hcd
[13241.015582] sd 2:0:0:0: [sdc] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=DRIVER_OK cmd_age=0s
[13241.025198] sd 2:0:0:0: [sdc] tag#0 CDB: opcode=0x28 28 00 00 00 03 e0 00 01 00 00
[13241.032949] I/O error, dev sdc, sector 992 op 0x0:(READ) flags 0x80700 phys_seg 25 prio class 2
[13272.150710] usb 2-1.2: reset SuperSpeed USB device number 4 using xhci-hcd
[13272.175469] sd 1:0:0:0: [sdb] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x03 driverbyte=DRIVER_OK cmd_age=31s
[13272.185365] sd 1:0:0:0: [sdb] tag#0 CDB: opcode=0x28 28 00 00 00 03 e0 00 01 00 00
[13272.193385] I/O error, dev sdb, sector 992 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2
[13434.846556] xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command
[13434.854592] xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead
[13434.862553] xhci-hcd xhci-hcd.0.auto: HC died; cleaning up
[1] https://github.com/nxp-imx/linux-imx/commit/
97a5349d936b08cf301730b59e4e8855283f815c
[2] https://github.com/nxp-imx/linux-imx/commit/
b4b5cbc5a12d7c3b920d1d7cba0ada3379e4e42b
Fixes:
fb8587a2c165 ("arm64: dtsi: imx8mp: add usb nodes")
Fixes:
ad37549cb5dc ("arm64: dts: imx8mq: add USB nodes")
Signed-off-by: Nathan Rossi <nathan.rossi@digi.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peng Fan [Thu, 23 Mar 2023 03:55:31 +0000 (11:55 +0800)]
arm64: dts: imx8mq: drop usb3-resume-missing-cas from usb
[ Upstream commit
fcd3f50845be909c9e0f8ac402874a2fb4b09c6c ]
The property is NXP downstream property that there is no user
in upstream, drop it.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230323035531.3808192-2-peng.fan@oss.nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of:
209043cf092d ("arm64: dts: imx8mp: imx8mq: Add parkmode-disable-ss-quirk on DWC3")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Mon, 4 Dec 2023 07:27:36 +0000 (08:27 +0100)]
drm/bridge: tc358768: select CONFIG_VIDEOMODE_HELPERS
[ Upstream commit
26513300978f7285c3e776c144f27ef71be61f57 ]
A dependency on this feature was recently introduced:
x86_64-linux-ld: vmlinux.o: in function `tc358768_bridge_pre_enable':
tc358768.c:(.text+0xbe3dae): undefined reference to `drm_display_mode_to_videomode'
Make sure this is always enabled.
Fixes:
e5fb21678136 ("drm/bridge: tc358768: Use struct videomode")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231204072814.968816-1-arnd@kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204072814.968816-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shifeng Li [Thu, 30 Nov 2023 08:14:15 +0000 (00:14 -0800)]
RDMA/irdma: Avoid free the non-cqp_request scratch
[ Upstream commit
e3e82fcb79eeb3f1a88a89f676831773caff514a ]
When creating ceq_0 during probing irdma, cqp.sc_cqp will be sent as a
cqp_request to cqp->sc_cqp.sq_ring. If the request is pending when
removing the irdma driver or unplugging its aux device, cqp.sc_cqp will be
dereferenced as wrong struct in irdma_free_pending_cqp_request().
PID: 3669 TASK:
ffff88aef892c000 CPU: 28 COMMAND: "kworker/28:0"
#0 [
fffffe0000549e38] crash_nmi_callback at
ffffffff810e3a34
#1 [
fffffe0000549e40] nmi_handle at
ffffffff810788b2
#2 [
fffffe0000549ea0] default_do_nmi at
ffffffff8107938f
#3 [
fffffe0000549eb8] do_nmi at
ffffffff81079582
#4 [
fffffe0000549ef0] end_repeat_nmi at
ffffffff82e016b4
[exception RIP: native_queued_spin_lock_slowpath+1291]
RIP:
ffffffff8127e72b RSP:
ffff88aa841ef778 RFLAGS:
00000046
RAX:
0000000000000000 RBX:
ffff88b01f849700 RCX:
ffffffff8127e47e
RDX:
0000000000000000 RSI:
0000000000000004 RDI:
ffffffff83857ec0
RBP:
ffff88afe3e4efc8 R8:
ffffed15fc7c9dfa R9:
ffffed15fc7c9dfa
R10:
0000000000000001 R11:
ffffed15fc7c9df9 R12:
0000000000740000
R13:
ffff88b01f849708 R14:
0000000000000003 R15:
ffffed1603f092e1
ORIG_RAX:
ffffffffffffffff CS: 0010 SS: 0000
-- <NMI exception stack> --
#5 [
ffff88aa841ef778] native_queued_spin_lock_slowpath at
ffffffff8127e72b
#6 [
ffff88aa841ef7b0] _raw_spin_lock_irqsave at
ffffffff82c22aa4
#7 [
ffff88aa841ef7c8] __wake_up_common_lock at
ffffffff81257363
#8 [
ffff88aa841ef888] irdma_free_pending_cqp_request at
ffffffffa0ba12cc [irdma]
#9 [
ffff88aa841ef958] irdma_cleanup_pending_cqp_op at
ffffffffa0ba1469 [irdma]
#10 [
ffff88aa841ef9c0] irdma_ctrl_deinit_hw at
ffffffffa0b2989f [irdma]
#11 [
ffff88aa841efa28] irdma_remove at
ffffffffa0b252df [irdma]
#12 [
ffff88aa841efae8] auxiliary_bus_remove at
ffffffff8219afdb
#13 [
ffff88aa841efb00] device_release_driver_internal at
ffffffff821882e6
#14 [
ffff88aa841efb38] bus_remove_device at
ffffffff82184278
#15 [
ffff88aa841efb88] device_del at
ffffffff82179d23
#16 [
ffff88aa841efc48] ice_unplug_aux_dev at
ffffffffa0eb1c14 [ice]
#17 [
ffff88aa841efc68] ice_service_task at
ffffffffa0d88201 [ice]
#18 [
ffff88aa841efde8] process_one_work at
ffffffff811c589a
#19 [
ffff88aa841efe60] worker_thread at
ffffffff811c71ff
#20 [
ffff88aa841eff10] kthread at
ffffffff811d87a0
#21 [
ffff88aa841eff50] ret_from_fork at
ffffffff82e0022f
Fixes:
44d9e52977a1 ("RDMA/irdma: Implement device initialization definitions")
Link: https://lore.kernel.org/r/20231130081415.891006-1-lishifeng@sangfor.com.cn
Suggested-by: "Ismail, Mustafa" <mustafa.ismail@intel.com>
Signed-off-by: Shifeng Li <lishifeng@sangfor.com.cn>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mike Marciniszyn [Wed, 29 Nov 2023 20:21:41 +0000 (14:21 -0600)]
RDMA/core: Fix umem iterator when PAGE_SIZE is greater then HCA pgsz
[ Upstream commit
4fbc3a52cd4d14de3793f4b2c721d7306ea84cf9 ]
64k pages introduce the situation in this diagram when the HCA 4k page
size is being used:
+-------------------------------------------+ <--- 64k aligned VA
| |
| HCA 4k page |
| |
+-------------------------------------------+
| o |
| |
| o |
| |
| o |
+-------------------------------------------+
| |
| HCA 4k page |
| |
+-------------------------------------------+ <--- Live HCA page
|OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO| <--- offset
| | <--- VA
| MR data |
+-------------------------------------------+
| |
| HCA 4k page |
| |
+-------------------------------------------+
| o |
| |
| o |
| |
| o |
+-------------------------------------------+
| |
| HCA 4k page |
| |
+-------------------------------------------+
The VA addresses are coming from rdma-core in this diagram can be
arbitrary, but for 64k pages, the VA may be offset by some number of HCA
4k pages and followed by some number of HCA 4k pages.
The current iterator doesn't account for either the preceding 4k pages or
the following 4k pages.
Fix the issue by extending the ib_block_iter to contain the number of DMA
pages like comment [1] says and by using __sg_advance to start the
iterator at the first live HCA page.
The changes are contained in a parallel set of iterator start and next
functions that are umem aware and specific to umem since there is one user
of the rdma_for_each_block() without umem.
These two fixes prevents the extra pages before and after the user MR
data.
Fix the preceding pages by using the __sq_advance field to start at the
first 4k page containing MR data.
Fix the following pages by saving the number of pgsz blocks in the
iterator state and downcounting on each next.
This fix allows for the elimination of the small page crutch noted in the
Fixes.
Fixes:
10c75ccb54e4 ("RDMA/umem: Prevent small pages from being returned by ib_umem_find_best_pgsz()")
Link: https://lore.kernel.org/r/20231129202143.1434-2-shiraz.saleem@intel.com
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dinghao Liu [Mon, 4 Dec 2023 07:41:56 +0000 (15:41 +0800)]
ASoC: wm_adsp: fix memleak in wm_adsp_buffer_populate
[ Upstream commit
29046a78a3c0a1f8fa0427f164caa222f003cf5b ]
When wm_adsp_buffer_read() fails, we should free buf->regions.
Otherwise, the callers of wm_adsp_buffer_populate() will
directly free buf on failure, which makes buf->regions a leaked
memory.
Fixes:
a792af69b08f ("ASoC: wm_adsp: Refactor compress stream initialisation")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231204074158.12026-1-dinghao.liu@zju.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Sun, 3 Dec 2023 15:24:05 +0000 (16:24 +0100)]
hwmon: (nzxt-kraken2) Fix error handling path in kraken2_probe()
[ Upstream commit
35fe2ad259a3bfca15ab78c8ffb5278cb6149c89 ]
There is no point in calling hid_hw_stop() if hid_hw_start() has failed.
There is no point in calling hid_hw_close() if hid_hw_open() has failed.
Update the error handling path accordingly.
Fixes:
82e3430dfa8c ("hwmon: add driver for NZXT Kraken X42/X52/X62/X72")
Reported-by: Aleksa Savic <savicaleksa83@gmail.com>
Closes: https://lore.kernel.org/all/
121470f0-6c1f-418a-844c-
7ec2e8a54b8e@gmail.com/
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jonas Malaco <jonas@protocubo.io>
Link: https://lore.kernel.org/r/a768e69851a07a1f4e29f270f4e2559063f07343.1701617030.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Neil Armstrong [Thu, 16 Nov 2023 16:44:21 +0000 (17:44 +0100)]
ASoC: codecs: lpass-tx-macro: set active_decimator correct default value
[ Upstream commit
a2f35ed1d237c459100adb0c39bb811d7f170977 ]
The -1 value for active_decimator[dai_id] is considered as "not set",
but at probe the table is initialized a 0, this prevents enabling the
DEC0 Mixer since it will be considered as already set.
Initialize the table entries as -1 to fix tx_macro_tx_mixer_put().
Fixes:
1c6a7f5250ce ("ASoC: codecs: tx-macro: fix active_decimator array")
Fixes:
c1057a08af43 ("ASoC: codecs: tx-macro: fix kcontrol put")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231116-topic-sm8x50-upstream-tx-macro-fix-active-decimator-set-v1-1-6edf402f4b6f@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Armin Wolf [Fri, 24 Nov 2023 18:27:47 +0000 (19:27 +0100)]
hwmon: (acpi_power_meter) Fix 4.29 MW bug
[ Upstream commit
1fefca6c57fb928d2131ff365270cbf863d89c88 ]
The ACPI specification says:
"If an error occurs while obtaining the meter reading or if the value
is not available then an Integer with all bits set is returned"
Since the "integer" is 32 bits in case of the ACPI power meter,
userspace will get a power reading of 2^32 * 1000 miliwatts (~4.29 MW)
in case of such an error. This was discovered due to a lm_sensors
bugreport (https://github.com/lm-sensors/lm-sensors/issues/460).
Fix this by returning -ENODATA instead.
Tested-by: <urbinek@gmail.com>
Fixes:
de584afa5e18 ("hwmon driver for ACPI 4.0 power meters")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231124182747.13956-1-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shifeng Li [Tue, 21 Nov 2023 10:12:36 +0000 (02:12 -0800)]
RDMA/irdma: Fix UAF in irdma_sc_ccq_get_cqe_info()
[ Upstream commit
2b78832f50c4d711e161b166d7d8790968051546 ]
When removing the irdma driver or unplugging its aux device, the ccq
queue is released before destorying the cqp_cmpl_wq queue.
But in the window, there may still be completion events for wqes. That
will cause a UAF in irdma_sc_ccq_get_cqe_info().
[34693.333191] BUG: KASAN: use-after-free in irdma_sc_ccq_get_cqe_info+0x82f/0x8c0 [irdma]
[34693.333194] Read of size 8 at addr
ffff889097f80818 by task kworker/u67:1/26327
[34693.333194]
[34693.333199] CPU: 9 PID: 26327 Comm: kworker/u67:1 Kdump: loaded Tainted: G O --------- -t - 4.18.0 #1
[34693.333200] Hardware name: SANGFOR Inspur/NULL, BIOS 4.1.13 08/01/2016
[34693.333211] Workqueue: cqp_cmpl_wq cqp_compl_worker [irdma]
[34693.333213] Call Trace:
[34693.333220] dump_stack+0x71/0xab
[34693.333226] print_address_description+0x6b/0x290
[34693.333238] ? irdma_sc_ccq_get_cqe_info+0x82f/0x8c0 [irdma]
[34693.333240] kasan_report+0x14a/0x2b0
[34693.333251] irdma_sc_ccq_get_cqe_info+0x82f/0x8c0 [irdma]
[34693.333264] ? irdma_free_cqp_request+0x151/0x1e0 [irdma]
[34693.333274] irdma_cqp_ce_handler+0x1fb/0x3b0 [irdma]
[34693.333285] ? irdma_ctrl_init_hw+0x2c20/0x2c20 [irdma]
[34693.333290] ? __schedule+0x836/0x1570
[34693.333293] ? strscpy+0x83/0x180
[34693.333296] process_one_work+0x56a/0x11f0
[34693.333298] worker_thread+0x8f/0xf40
[34693.333301] ? __kthread_parkme+0x78/0xf0
[34693.333303] ? rescuer_thread+0xc50/0xc50
[34693.333305] kthread+0x2a0/0x390
[34693.333308] ? kthread_destroy_worker+0x90/0x90
[34693.333310] ret_from_fork+0x1f/0x40
Fixes:
44d9e52977a1 ("RDMA/irdma: Implement device initialization definitions")
Signed-off-by: Shifeng Li <lishifeng1992@126.com>
Link: https://lore.kernel.org/r/20231121101236.581694-1-lishifeng1992@126.com
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sindhu Devale [Tue, 25 Jul 2023 15:55:03 +0000 (10:55 -0500)]
RDMA/irdma: Refactor error handling in create CQP
[ Upstream commit
133b1cba46c6c8b67c630eacc0a1e4969da16517 ]
In case of a failure in irdma_create_cqp, do not call
irdma_destroy_cqp, but cleanup all the allocated resources
in reverse order.
Drop the extra argument in irdma_destroy_cqp as its no longer needed.
Signed-off-by: Krzysztof Czurylo <krzysztof.czurylo@intel.com>
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20230725155505.1069-3-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Stable-dep-of:
2b78832f50c4 ("RDMA/irdma: Fix UAF in irdma_sc_ccq_get_cqe_info()")
Signed-off-by: Sasha Levin <sashal@kernel.org>