drm/i915: Use Transparent Hugepages when IOMMU is enabled

Usage of Transparent Hugepages was disabled in 9987da4b5dcf
("drm/i915: Disable THP until we have a GPU read BW W/A"), but since it
appears majority of performance regressions reported with an enabled IOMMU
can be almost eliminated by turning them on, lets just do that.

To err on the side of safety we keep the current default in cases where
IOMMU is not active, and only when it is default to the "huge=within_size"
mode. Although there probably would be wins to enable them throughout,
more extensive testing across benchmarks and platforms would need to be
done.

With the patch and IOMMU enabled my local testing on a small Skylake part
shows OglVSTangent regression being reduced from ~14% (IOMMU on versus
IOMMU off) to ~2% (same comparison but with THP on).

More detailed testing done in the below referenced Gitlab issue by Eero:

Skylake GT4e:

Performance drops from enabling IOMMU:

    30-35% SynMark CSDof
    20-25% Unigine Heaven, MemBW GPU write, SynMark VSTangent
    ~20% GLB Egypt  (1/2 screen window)
    10-15% GLB T-Rex (1/2 screen window)
    8-10% GfxBench T-Rex, MemBW GPU blit
    7-8% SynMark DeferredAA + TerrainFly* + ZBuffer
    6-7% GfxBench Manhattan 3.0 + 3.1, SynMark TexMem128 & CSCloth
    5-6% GfxBench CarChase, Unigine Valley
    3-5% GfxBench Vulkan & GL AztecRuins + ALU2, MemBW GPU texture,
         SynMark Fill*, Deferred, TerrainPan*
    1-2% Most of the other tests

With the patch drops become:

    20-25% SynMark TexMem*
    15-20% GLB Egypt (1/2 screen window)
    10-15% GLB T-Rex (1/2 screen window)
    4-7% GfxBench T-Rex, GpuTest Triangle
    1-8% GfxBench ALU2 (offscreen 1%, onscreen 8%)
    3% GfxBench Manhattan 3.0, SynMark CSDof
    2-3% Unigine Heaven + Valley, MemBW GPU texture
    1-3 GfxBench Manhattan 3.1 + CarChase + Vulkan & GL AztecRuins

Broxton:

Performance drops from IOMMU, without patch:

    30% MemBW GPU write
    25% SynMark ZBuffer + Fill*
    20% MemBW GPU blit
    15% MemBW GPU blend, GpuTest Triangle
    10-15% MemBW GPU texture
    10% GLB Egypt, Unigine Heaven (had hangs), SynMark TerrainFly*
    7-9% GLB T-Rex, GfxBench Manhattan 3.0 + T-Rex,
         SynMark Deferred* + TexMem*
    6-8% GfxBench CarChase, Unigine Valley,
         SynMark CSCloth + ShMapVsm + TerrainPan*
    5-6% GfxBench Manhattan 3.1 + GL AztecRuins,
         SynMark CSDof + TexFilterTri
    2-4% GfxBench ALU2, SynMark DrvRes + GSCloth + ShMapPcf + Batch[0-5] +
         TexFilterAniso, GpuTest GiMark + 32-bit Julia

And with patch:

    15-20% MemBW GPU texture
    10% SynMark TexMem*
    8-9% GLB Egypt (1/2 screen window)
    4-5% GLB T-Rex (1/2 screen window)
    3-6% GfxBench Manhattan 3.0, GpuTest FurMark,
         SynMark Deferred + TexFilterTri
    3-4% GfxBench Manhattan 3.1 + T-Rex, SynMark VSInstancing
    2-4% GpuTest Triangle, SynMark DeferredAA
    2-3% Unigine Heaven + Valley
    1-3% SynMark Terrain*
    1-2% GfxBench CarChase, SynMark TexFilterAniso + ZBuffer

Tigerlake-H:

    20-25% MemBW GPU texture
    15-20% GpuTest Triangle
    13-15% SynMark TerrainFly* + DeferredAA + HdrBloom
    8-10% GfxBench Manhattan 3.1, SynMark TerrainPan* + DrvRes
    6-7% GfxBench Manhattan 3.0, SynMark TexMem*
    4-8% GLB onscreen Fill + T-Rex + Egypt (more in onscreen than
         offscreen versions of T-Rex/Egypt)
    4-6% GfxBench CarChase + GLES AztecRuins + ALU2, GpuTest 32-bit Julia,
         SynMark CSDof + DrvState
    3-5% GfxBench T-Rex + Egypt, Unigine Heaven + Valley, GpuTest Plot3D
    1-7% Media tests
    2-3% MemBW GPU blit
    1-3% Most of the rest of 3D tests

With the patch:

    6-8% MemBW GPU blend => the only regression in these tests (compared
         to IOMMU without THP)
    4-6% SynMark DrvState (not impacted) + HdrBloom (improved)
    3-4% GLB T-Rex
    ~3% GLB Egypt, SynMark DrvRes
    1-3% GfxBench T-Rex + Egypt, SynMark TexFilterTri
    1-2% GfxBench CarChase + GLES AztecRuins, Unigine Valley,
        GpuTest Triangle
    ~1% GfxBench Manhattan 3.0/3.1, Unigine Heaven

Perf of several tests actually improved with IOMMU + THP, compared to no
IOMMU / no THP:

    10-15% SynMark Batch[0-3]
    5-10% MemBW GPU texture, SynMark ShMapVsm
    3-4% SynMark Fill* + Geom*
    2-3% SynMark TexMem512 + CSCloth
    1-2% SynMark TexMem128 + DeferredAA

As a summary across all platforms, these are the benchmarks where enabling
THP on top of IOMMU enabled brings regressions:

 * Skylake GT4e:
   20-25% SynMark TexMem*
   (whereas all MemBW GPU tests either improve or are not affected)

 * Broxton J4205:
   7% MemBW GPU texture
   2-3% SynMark TexMem*

 * Tigerlake-H:
   7% MemBW GPU blend

Other benchmarks show either lowering of regressions or improvements.

v2:
 * Add Kconfig dependency to transparent hugepages and some help text.
 * Move to helper for easier handling of kernel build options.

v3:
 * Drop Kconfig. (Daniel)

v4:
 * Add some benchmark results to commit message.

v5:
 * Add explicit regression summary to commit message. (Eero)

References: b901bb89324a ("drm/i915/gemfs: enable THP")
References: 9987da4b5dcf ("drm/i915: Disable THP until we have a GPU read BW W/A")
References: https://gitlab.freedesktop.org/drm/intel/-/issues/430
Co-developed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Eero Tamminen <eero.t.tamminen@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909114448.508493-1-tvrtko.ursulin@linux.intel.com

drm/i915: clean up inconsistent indenting

There is a statement that is indented one character too deeply,
clean this up.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902215737.55570-1-colin.king@canonical.com

drm/i915/selftests: fixup igt_shrink_thp

Since the object might still be active here, the shrink_all will simply
ignore it, which blows up in the test, since the pages will still be
there. Currently THP is disabled which should result in the test being
skipped, but if we ever re-enable THP we might start seeing the failure.
Fix this by forcing I915_SHRINK_ACTIVE.

v2: Some machine in the shard runs doesn't seem to have any available
swap when running this test. Try to handle this.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210906091729.2093312-1-matthew.auld@intel.com

drm/i915/gtt: add some flushing for the 64K GTT path

If we need to mark the PDE as operating in 64K GTT mode, we should be
paranoid and flush the extra writes, like we already do for the PTEs. On
some platforms the clflush can apparently add the just the right amount
of magical delay to force the GPU to see the updated entry.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210903155317.1854012-1-matthew.auld@intel.com

drm/i915/gt: Add separate MOCS table for Gen12 devices other than TGL/RKL

MOCS table of TGL/RKL has MOCS[1] set to L3_UC.
While for other gen12 devices we need to set MOCS[1] as L3_WB,
So adding a new MOCS table for other gen 12 devices eg. ADL.

Fixes: cfbe5291a189 ("drm/i915/gt: Initialize unused MOCS entries with device specific values")
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Ayaz A Siddiqui <ayaz.siddiqui@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
[mattrope: fix whitespace error]
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210907171639.1221287-1-ayaz.siddiqui@intel.com

drm/i915/adl_s: Remove require_force_probe protection

Removing force probe protection from ADLS platform. Did
not observe warnings, errors, flickering or any visual
defects while doing ordinary tasks like browsing and
editing documents in a two monitor setup.

For more info drm-tip idle run results :
https://intel-gfx-ci.01.org/tree/drm-tip/bat-all.html?

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: ravitejax <ravitejax.goud.talla@intel.com>
Reviewed-by: Ayaz A Siddiqui <ayaz.siddiqui@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210903182034.668467-1-ravitejax.gpud.talla@intel.com

drm/i915: Stop rcu support for i915_address_space

The full audit is quite a bit of work:

- i915_dpt has very simple lifetime (somehow we create a display pagetable vm
  per object, so its _very_ simple, there's only ever a single vma in there),
  and uses i915_vm_close(), which internally does a i915_vm_put(). No rcu.

  Aside: wtf is i915_dpt doing in the intel_display.c garbage collector as a new
  feature, instead of added as a separate file with some clean-ish interface.

  Also, i915_dpt unfortunately re-introduces some coding patterns from
  pre-dma_resv_lock conversion times.

- i915_gem_proto_ctx is fully refcounted and no rcu, all protected by
  fpriv->proto_context_lock.

- i915_gem_context is itself rcu protected, and that might leak to anything it
  points at. Before

commit cf977e18610e66e48c31619e7e0cfa871be9eada
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Wed Dec 2 11:21:40 2020 +0000

    drm/i915/gem: Spring clean debugfs

  and

commit db80a1294c231b6ac725085f046bb2931e00c9db
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Mon Jan 18 11:08:54 2021 +0000

    drm/i915/gem: Remove per-client stats from debugfs/i915_gem_objects

  we had a bunch of debugfs files that relied on rcu protecting everything, but
  those are gone now. The main one was removed even earlier with

  There doesn't seem to be anything left that's actually protecting
  stuff now that the ctx->vm itself is invariant. See

commit ccbc1b97948ab671335e950271e39766729736c3
Author: Jason Ekstrand <jason@jlekstrand.net>
Date:   Thu Jul 8 10:48:30 2021 -0500

    drm/i915/gem: Don't allow changing the VM on running contexts (v4)

  Note that we drop the vm refcount before the final release of the gem context
  refcount, so this is all very dangerous even without rcu. Note that aside from
  later on creating new engines (a defunct feature) and debug output we're never
  looked at gem_ctx->vm for anything functional, hence why this is ok.
  Fingers crossed.

  Preceeding patches removed all vestiges of rcu use from gem_ctx->vm
  derferencing to make it clear it's really not used.

  The gem_ctx->rcu protection was introduced in

commit a4e7ccdac38ec8335d9e4e2656c1a041c77feae1
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Fri Oct 4 14:40:09 2019 +0100

    drm/i915: Move context management under GEM

  The commit message is somewhat entertaining because it fails to
  mention this fact completely, and compensates that by an in-commit
  changelog entry that claims that ctx->vm is protected by ctx->mutex.
  Which was the case _before_ this commit, but no longer after it.

- intel_context holds a full reference. Unfortunately intel_context is also rcu
  protected and the reference to the ->vm is dropped before the
  rcu barrier - only the kfree is delayed. So again we need to check
  whether that leaks anywhere on the intel_context->vm. RCU is only
  used to protect intel_context sitting on the breadcrumb lists, which
  don't look at the vm anywhere, so we are fine.

  Nothing else relies on rcu protection of intel_context and hence is
  fully protected by the kref refcount alone, which protects
  intel_context->vm in turn.

  The breadcrumbs rcu usage was added in

commit c744d50363b714783bbc88d986cc16def13710f7
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Thu Nov 26 14:04:06 2020 +0000

    drm/i915/gt: Split the breadcrumb spinlock between global and contexts

  its parent commit added the intel_context rcu protection:

commit 14d1eaf08845c534963c83f754afe0cb14cb2512
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Thu Nov 26 14:04:05 2020 +0000

    drm/i915/gt: Protect context lifetime with RCU

  given some credence to my claim that I've actually caught them all.

- drm_i915_gem_object's shares_resv_from pointer has a full refcount to the
  dma_resv, which is a sub-refcount that's released after the final
  i915_vm_put() has been called. Safe.

  Aside: Maybe we should have a struct dma_resv_shared which is just dma_resv +
  kref as a stand-alone thing. It's a pretty useful pattern which other drivers
  might want to copy.

  For a bit more context see

commit 4d8151ae5329cf50781a02fd2298a909589a5bab
Author: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Date:   Tue Jun 1 09:46:41 2021 +0200

    drm/i915: Don't free shared locks while shared

- the fpriv->vm_xa was relying on rcu_read_lock for lookup, but that
  was updated in a prep patch too to just be a spinlock-protected
  lookup.

- intel_gt->vm is set at driver load in intel_gt_init() and released
  in intel_gt_driver_release(). There seems to be some issue that
  in some error paths this is called twice, but otherwise no rcu to be
  found anywhere. This was added in the below commit, which
  unfortunately doesn't explain why this complication exists.

commit e6ba76480299a0d77c51d846f7467b1673aad25b
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Sat Dec 21 16:03:24 2019 +0000

    drm/i915: Remove i915->kernel_context

  The proper fix most likely for this is to start using drmm_ at large
  scale, but that's also huge amounts of work.

- i915_vma->vm is some real pain, because rcu is rcu protected, at
  least in the vma lookup in the context lookup cache in
  eb_lookup_vma(). This was added in

commit 4ff4b44cbb70c269259958cbcc48d7b8a2cb9ec8
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Fri Jun 16 15:05:16 2017 +0100

    drm/i915: Store a direct lookup from object handle to vma

  This was changed to a radix tree from the hashtable in, but with the
  locking unchanged, in

commit d1b48c1e7184d9bc4ae6d7f9fe2eed9efed11ffc
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Wed Aug 16 09:52:08 2017 +0100

    drm/i915: Replace execbuf vma ht with an idr

  In

commit 93159e12353c2a47e5576d642845a91fa00530bf
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Mon Mar 23 09:28:41 2020 +0000

    drm/i915/gem: Avoid gem_context->mutex for simple vma lookup

  the locking was changed from dev->struct_mutex to rcu, which added
  the requirement to rcu protect i915_vma. Somehow this was missed in
  review (or I'm completely blind).

  Irrespective of all that the vma lookup cache rcu_read_lock grabs a
  full reference of the vma and the rcu doesn't leak further. So no
  impact on i915_address_space from that.

  I have not found any other rcu use for i915_vma, but given that it
  seems broken I also didn't bother to do a careful in-depth audit.

Alltogether there's nothing left in-tree anymore which requires that a
pointer deref to an i915_address_space is safe undre rcu_read_lock
only.

rcu protection of i915_address_space was introduced in

commit b32fa811156328aea5a3c2ff05cc096490382456
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Thu Jun 20 19:37:05 2019 +0100

    drm/i915/gtt: Defer address space cleanup to an RCU worker

by mixing up a bugfixing (i915_address_space needs to be released from
a worker) with enabling rcu support. The commit message also seems
somewhat confused, because it talks about cleanup of WC pages
requiring sleep, while the code and linked bugzilla are about a
requirement to take dev->struct_mutex (which yes sleeps but it's a
much more specific problem). Since final kref_put can be called from
pretty much anywhere (including hardirq context through the
scheduler's i915_active cleanup) we need a worker here. Hence that
part must be kept.

Ideally all these reclaim workers should have some kind of integration
with our shrinkers, but for some of these it's rather tricky. Anyway,
that's a preexisting condition in the codeebase that we wont fix in
this patch here.

We also remove the rcu_barrier in ggtt_cleanup_hw added in

commit 60a4233a4952729089e4df152e730f8f4d0e82ce
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Mon Jul 29 14:24:12 2019 +0100

    drm/i915: Flush the i915_vm_release before ggtt shutdown

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902142057.929669-11-daniel.vetter@ffwll.ch

drm/i915: use xa_lock/unlock for fpriv->vm_xa lookups

We don't need the absolute speed of rcu for this. And
i915_address_space in general dont need rcu protection anywhere else,
after we've made gem contexts and engines a lot more immutable.

Note that this semantically reverts

commit aabbe344dc3ca5f7d8263a02608ba6179e8a4499
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Fri Aug 30 19:03:25 2019 +0100

    drm/i915: Use RCU for unlocked vm_idr lookup

except we have the conversion from idr to xarray in between.

v2: kref_get_unless_zero is no longer required (Maarten)

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902142057.929669-10-daniel.vetter@ffwll.ch

drm/i915: Drop __rcu from gem_context->vm

It's been invariant since

    commit ccbc1b97948ab671335e950271e39766729736c3
    Author: Jason Ekstrand <jason@jlekstrand.net>
    Date:   Thu Jul 8 10:48:30 2021 -0500

        drm/i915/gem: Don't allow changing the VM on running contexts (v4)

this just completes the deed. I've tried to split out prep work for
more careful review as much as possible, this is what's left:

- get_ppgtt gets simplified since we don't need to grab a temporary
  reference - we can rely on the temporary reference for the gem_ctx
  while we inspect the vm. The new vm_id still needs a full
  i915_vm_open ofc. This also removes the final caller of context_get_vm_rcu

- A pile of selftests can now just look at ctx->vm instead of
  rcu_dereference_protected( , true) or similar things.

- All callers of i915_gem_context_vm also disappear.

- I've changed the hugepage selftest to set scrub_64K without any
  locking, because when we inspect that setting we're also not taking
  any locks either. It works because it's a selftests that's careful
  (single threaded gives you nice ordering) and not a live driver
  where races can happen from anywhere.

These can only be split up further if we have some intermediate state
with a bunch more rcu_dereference_protected(ctx->vm, true), just to
shut up lockdep and sparse.

The conversion to __rcu happened in

commit a4e7ccdac38ec8335d9e4e2656c1a041c77feae1
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Fri Oct 4 14:40:09 2019 +0100

    drm/i915: Move context management under GEM

Note that we're not breaking the actual bugfix in there: The real
bugfix is pushing the i915_vm_relase onto a separate worker, to avoid
locking inversion issues. The rcu conversion was just thrown in for
entertainment value on top (no vm lookup isn't even close to anything
that's a hotpath where removing the single spinlock can be measured).

v2: Rebase over the change to move the i915_vm_put() into
i915_gem_context_release().

v3: Trivial conflict against repainted shed.

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902142057.929669-9-daniel.vetter@ffwll.ch

drm/i915: Use i915_gem_context_get_eb_vm in intel_context_set_gem

Since

commit ccbc1b97948ab671335e950271e39766729736c3
Author: Jason Ekstrand <jason@jlekstrand.net>
Date:   Thu Jul 8 10:48:30 2021 -0500

    drm/i915/gem: Don't allow changing the VM on running contexts (v4)

the gem_ctx->vm can't change anymore. Plus we always set the
intel_context->vm, so might as well use the helper we have for that.

This makes it very clear that we always overwrite intel_context->vm
for userspace contexts, since the default is gt->vm, which is
explicitly reserved for kernel context use. It would be good to split
things up a bit further and avoid any possibility for an accident
where we run kernel stuff in userspace vm or the other way round.

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902142057.929669-8-daniel.vetter@ffwll.ch

drm/i915: Add i915_gem_context_is_full_ppgtt

And use it anywhere we have open-coded checks for ctx->vm that really
only check for full ppgtt.

Plus for paranoia add a GEM_BUG_ON that checks it's really only set
when we have full ppgtt, just in case. gem_context->vm is different
since it's NULL in ggtt mode, unlike intel_context->vm or gt->vm,
which is always set.

v2: 0day found a testcase that I missed.

v3: Repaint shed (Jon, Tvrtko)

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902142057.929669-7-daniel.vetter@ffwll.ch

drm/i915: Use i915_gem_context_get_eb_vm in ctx_getparam

Consolidates the "which is the vm my execbuf runs in" code a bit. We
do some get/put which isn't really required, but all the other users
want the refcounting, and I figured doing a function just for this
getparam to avoid 2 atomis is a bit much.

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902142057.929669-6-daniel.vetter@ffwll.ch

drm/i915: Rename i915_gem_context_get_vm_rcu to i915_gem_context_get_eb_vm

The important part isn't so much that this does an rcu lookup - that's
more an implementation detail, which will also be removed.

The thing that makes this different from other functions is that it's
gettting you the vm that batchbuffers will run in for that gem
context, which is either a full ppgtt stored in gem->ctx, or the ggtt.

We'll make more use of this function later on.

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902142057.929669-5-daniel.vetter@ffwll.ch

drm/i915: Drop code to handle set-vm races from execbuf

Changing the vm from a finalized gem ctx is no longer possible, which
means we don't have to check for that anymore.

I was pondering whether to keep the check as a WARN_ON, but things go
boom real bad real fast if the vm of a vma is wrong. Plus we'd need to
also get the ggtt vm for !full-ppgtt platforms. Ditching it all seemed
like a better idea.

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
References: ccbc1b97948a ("drm/i915/gem: Don't allow changing the VM on running contexts (v4)")
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902142057.929669-4-daniel.vetter@ffwll.ch

drm/i915: Keep gem ctx->vm alive until the final put

The comment added in

    commit b81dde719439c8f09bb61e742ed95bfc4b33946b
    Author: Chris Wilson <chris@chris-wilson.co.uk>
    Date:   Tue May 21 22:11:29 2019 +0100

        drm/i915: Allow userspace to clone contexts on creation

and moved in

    commit 27dbae8f36c1c25008b7885fc07c57054b7dfba3
    Author: Chris Wilson <chris@chris-wilson.co.uk>
    Date:   Wed Nov 6 09:13:12 2019 +0000

        drm/i915/gem: Safely acquire the ctx->vm when copying

suggested that i915_address_space were at least intended to be managed
through SLAB_TYPESAFE_BY_RCU:

                * This ppgtt may have be reallocated between
                * the read and the kref, and reassigned to a third
                * context. In order to avoid inadvertent sharing
                * of this ppgtt with that third context (and not
                * src), we have to confirm that we have the same
                * ppgtt after passing through the strong memory
                * barrier implied by a successful
                * kref_get_unless_zero().

But extensive git history search has not brough any such reuse to
light.

What has come to light though is that ever since

commit 2850748ef8763ab46958e43a4d1c445f29eeb37d
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Fri Oct 4 14:39:58 2019 +0100

    drm/i915: Pull i915_vma_pin under the vm->mutex

(yes this commit is earlier) the final i915_vma_put call has been
moved from i915_gem_context_free (now called _release) to
context_close, which means it's not actually safe anymore to access
the ctx->vm pointer without lock helds, because it might disappear at
any moment. Note that superficially things all still work, because the
i915_address_space is RCU protected since

    commit b32fa811156328aea5a3c2ff05cc096490382456
    Author: Chris Wilson <chris@chris-wilson.co.uk>
    Date:   Thu Jun 20 19:37:05 2019 +0100

        drm/i915/gtt: Defer address space cleanup to an RCU worker

except the very clever macro above (which is designed to protected
against object reuse due to SLAB_TYPESAFE_BY_RCU or similar tricks)
results in an endless loop if the refcount of the ctx->vm ever
permanently drops to 0. Which it totally now can.

Fix that by moving the final i915_vm_put to where it should be.

Note that i915_gem_context is rcu protected, but _only_ the final
kfree. This means anyone who chases a pointer to a gem ctx solely
under the protection can pretty only call kref_get_unless_zero(). This
seems to be pretty much the case, aside from a bunch of cases that
consult the scheduling information without any further protection.

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Fixes: 2850748ef876 ("drm/i915: Pull i915_vma_pin under the vm->mutex")
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902142057.929669-3-daniel.vetter@ffwll.ch

drm/i915: Release ctx->syncobj on final put, not on ctx close

gem context refcounting is another exercise in least locking design it
seems, where most things get destroyed upon context closure (which can
race with anything really). Only the actual memory allocation and the
locks survive while holding a reference.

This tripped up Jason when reimplementing the single timeline feature
in

commit 00dae4d3d35d4f526929633b76e00b0ab4d3970d
Author: Jason Ekstrand <jason@jlekstrand.net>
Date:   Thu Jul 8 10:48:12 2021 -0500

    drm/i915: Implement SINGLE_TIMELINE with a syncobj (v4)

We could fix the bug by holding ctx->mutex in execbuf and clear the
pointer (again while holding the mutex) context_close, but it's
cleaner to just make the context object actually invariant over its
_entire_ lifetime. This way any other ioctl that's potentially racing,
but holding a full reference, can still rely on ctx->syncobj being
an immutable pointer. Which without this change, is not the case.

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Fixes: 00dae4d3d35d ("drm/i915: Implement SINGLE_TIMELINE with a syncobj (v4)")
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902142057.929669-2-daniel.vetter@ffwll.ch

drm/i915: Release i915_gem_context from a worker

The only reason for this really is the i915_gem_engines->fence
callback engines_notify(), which exists purely as a fairly funky
reference counting scheme for that. Otherwise all other callers are
from process context, and generally fairly benign locking context.

Unfortunately untangling that requires some major surgery, and we have
a few i915_gem_context reference counting bugs that need fixing, and
they blow in the current hardirq calling context, so we need a
stop-gap measure.

Put a FIXME comment in when this should be removable again.

v2: Fix mock_context(), noticed by intel-gfx-ci.

Acked-by: Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902142057.929669-1-daniel.vetter@ffwll.ch

drm/i915/gt: Initialize L3CC table in mocs init

Initialize the L3CC table as part of mocs initialization to program
LNCFCMOCSx registers so that the mocs settings are available for
selection for subsequent memory transactions in the driver load path.

We need to keep L3CC initialization in intel_mocs_init_engine() also
so that in execlists submission, these registers can be rewritten
during engine reset.

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Sreedhar Telukuntla <sreedhar.telukuntla@intel.com>
Signed-off-by: Ayaz A Siddiqui <ayaz.siddiqui@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210903092153.535736-6-ayaz.siddiqui@intel.com

drm/i915/gt: Initialize unused MOCS entries with device specific values

Historically we've initialized all undefined/reserved entries in
a platform's MOCS table to the contents of table entry #1 (i.e.,
I915_MOCS_PTE).
Going forward, we can't assume that table entry #1 will always
contain suitable values to use for undefined/reserved table
indices. We'll allow a platform-specific table index to be
selected at table initialization time in these cases.

This new mechanism to select L3 WB entry will be applicable for
all the Gen12+ platforms except TGL and RKL.

Since TGL and RLK are already in production so their mocs settings
are intact to avoid ABI break.

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Ayaz A Siddiqui <ayaz.siddiqui@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210903092153.535736-5-ayaz.siddiqui@intel.com

drm/i915/gt: Set BLIT_CCTL reg to un-cached

Blitter commands which do not have MOCS fields rely on
cacheability of BlitterCacheControlRegister which was mapped
to index 0 by default.Once we changed the MOCS value of
index 0 to L3 WB, tests like gem_linear_blits started failing
due to a change in cacheability from UC to WB.

Program and place the BlitterCacheControlRegister in
build_aux_regs().

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Ayaz A Siddiqui <ayaz.siddiqui@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210903092153.535736-4-ayaz.siddiqui@intel.com

drm/i915/gt: Set CMD_CCTL to UC for Gen12 Onward

Cache-control registers for Command Stream(CMD_CCTL) are used
to set catchability for memory writes and reads outputted by
Command Streamers on Gen12 onward platforms.

These registers need to point un-cached(UC) MOCS index.

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Ayaz A Siddiqui <ayaz.siddiqui@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210903092153.535736-3-ayaz.siddiqui@intel.com

drm/i915/gt: Add support of mocs propagation

Now there are lots of Command and registers that require mocs index
programming.
So propagating mocs_index from mocs to gt so that it can be
used directly without having platform-specific checks.

V2:
Changed 'i915_mocs_index_gt' to anonymous structure.

Cc: CQ Tang<cq.tang@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Ayaz A Siddiqui <ayaz.siddiqui@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210903092153.535736-2-ayaz.siddiqui@intel.com

drm/i915/gem: Fix the mman selftest

Using the I915_MMAP_TYPE_FIXED mmap type requires the TTM backend, so
for that mmap type, use __i915_gem_object_create_user() instead of
i915_gem_object_create_internal(), as we really want to tests objects
mmap-able by user-space.

This also means that the out-of-space error happens at object creation
and returns -ENXIO rather than -ENOSPC, so fix the code up to expect
that on out-of-offset-space errors.

Finally only use I915_MMAP_TYPE_FIXED for LMEM and SMEM for now if
testing on LMEM-capable devices. For stolen LMEM, we still take the
same path as for integrated, as that haven't been moved over to TTM yet,
and user-space should not be able to create out of stolen LMEM anyway.

v2:
 - Check the presence of the obj->ops->mmap_offset callback rather than
   hardcoding the supported mmap regions in can_mmap() (Maarten Lankhorst)

Fixes: 7961c5b60f23 ("drm/i915: Add TTM offset argument to mmap.")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210831122931.157536-1-thomas.hellstrom@linux.intel.com

drm/i915/guc: drop guc_communication_enabled

The function is only used from within GEM_BUG_ON(), which is causing
warnings with Wunneeded-internal-declaration in some builds. Since the
function is a simple wrapper around a CT function, we can just call the
CT function directly instead.

Fixes: 1fb12c587152 ("drm/i915/guc: skip disabling CTBs before sanitizing the GuC")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210823163137.19770-1-daniele.ceraolospurio@intel.com

drm/i915: Actually delete gpu reloc selftests

In commit 8e02cceb1f1f ("drm/i915: delete gpu reloc code") I deleted
the gpu relocation code and the selftest include and enabling, but
accidentally forgot about the selftest source code.

Fix this oversight.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210820154932.296628-1-daniel.vetter@ffwll.ch

drm/i915: Ensure wa_init_finish() is called for ctx workaround list

A recent restructuring of our context workaround list initialization
added an early return for non-render engines; this caused us to
potentially miss the wa_init_finish() call at the end of the function.
The mistake is pretty harmless --- the only impact is that non-render
engines on graphics version 12.50+ platforms we don't trim down the
workaround list to reclaim some memory, and we don't print the usual
"Initialized 1 context workaround" message in dmesg.  Let's change the
early return to a jump down to the wa_init_finish() call at the bottom
of the function.

Reported-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Fixes: 9e9dfd080201 ("drm/i915/dg2: Maintain backward-compatible nested batch behavior")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210826033559.1209020-1-matthew.d.roper@intel.com

drm/i915/pci: rename functions to have i915_pci prefix

Follow the usual naming conventions. While at it, fix i915_pci.h SPDX
license comment format and add header include guards.

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210825150623.28980-1-jani.nikula@intel.com

drm/ttm, drm/i915: Update ttm_move_memcpy for async use

The buffer object argument to ttm_move_memcpy was only used to
determine whether the destination memory should be cleared only
or whether we should copy data. Replace it with a "clear" bool, and
update the callers.

The intention here is to be able to use ttm_move_memcpy() async under
a dma-fence as a fallback if an accelerated blit fails in a security-
critical path where data might leak if the blit is not properly
performed. For that purpose the bo is an unsuitable argument since
its relevant members might already have changed at call time.

Finally, update the ttm_move_memcpy kerneldoc that seems to have
ended up with a stale version.

Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20210813144331.372957-3-thomas.hellstrom@linux.intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20210813144331.372957-3-thomas.hellstrom@linux.intel.com

drm/i915/ttm: Reorganize the ttm move code somewhat

In order to make the code a bit more readable and to facilitate
async memcpy moves, reorganize the move code a little. Determine
at an early stage whether to copy or to clear.

v2:
- Don't set up the memcpy iterators unless we are actually going to memcpy.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20210813144331.372957-2-thomas.hellstrom@linux.intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20210813144331.372957-2-thomas.hellstrom@linux.intel.com

drm/i915/dg2: Add new LRI reg offsets

New LRI register offsets were introduced for DG2, this patch adds
those extra registers, and create new register table for setting offsets
to compare with HW generated context image - especially for gt_lrc test.
Also updates general purpose register with scratch offset for DG2, in
order to use it for live_lrc_fixed selftest.

Cc: Chris P Wilson <chris.p.wilson@intel.com>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Caz Yokoyama <caz.yokoyama@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210805163647.801064-8-matthew.d.roper@intel.com

drm/i915/selftests: Increase timeout in i915_gem_contexts selftests

Like in the case of several other selftests, generating lots of requests
in a loop takes a bit longer with GuC submission. Increase a timeout in
i915_gem_contexts selftest to take this into account.

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727031703.40395-2-matthew.brost@intel.com

drm/i915: s/0/NULL/

Use NULL where appropriate.

drivers/gpu/drm/i915/gt/intel_ring_submission.c:1210:24: warning: Using plain integer as NULL pointer

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210712161815.24776-2-ville.syrjala@linux.intel.com
Reviewed-by: Matthew Auld <matthew.auld@intel.com>

drm/i915/selftest: Fix use of err in igt_reset_{fail, nop}_engine()

Clang warns:

In file included from drivers/gpu/drm/i915/gt/intel_reset.c:1514:
drivers/gpu/drm/i915/gt/selftest_hangcheck.c:465:62: warning: variable
'err' is uninitialized when used here [-Wuninitialized]
        pr_err("[%s] Create context failed: %d!\n", engine->name, err);
                                                                  ^~~
...
drivers/gpu/drm/i915/gt/selftest_hangcheck.c:580:62: warning: variable
'err' is uninitialized when used here [-Wuninitialized]
        pr_err("[%s] Create context failed: %d!\n", engine->name, err);
                                                                  ^~~
...
2 warnings generated.

This appears to be a copy and paste issue. Use ce directly using the %pe
specifier to pretty print the error code so that err is not used
uninitialized in these functions.

Fixes: 3a7b72665ea5 ("drm/i915/selftest: Bump selftest timeouts for hangcheck")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210813171158.2665823-1-nathan@kernel.org

drm/i915/dg1: remove __maybe_unused leftover

This was added in commit 05e265841f7e ("drm/i915/dg1: add initial DG-1
definitions") so we could continue to add support for DG1 without
risk to expose a broken UAPI. Now that we added DG1 to the PCI ID list
i915 may bind to, remove the leftover.

Fixes: d5ef86b38e4c ("drm/i915: Add pci ids and uapi for DG1")
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210819210349.95103-1-lucas.demarchi@intel.com

drm/i915/gt: Potential error pointer dereference in pinned_context()

If the intel_engine_create_pinned_context() function returns an error
pointer, then dereferencing "ce" will Oops.  Use "vm" instead of
"ce->vm".

Fixes: cf586021642d ("drm/i915/gt: Pipelined page migration")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210813113600.GC30697@kili

drm/i915/debugfs: hook up ttm_resource_manager_debug

This should give a more complete view of the various bits of internal
resource manager state, for device local-memory.

v2(Thomas):
   - Move the region printing into a nice helper

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210819093419.295636-2-matthew.auld@intel.com

drm/i915/buddy: add some pretty printing

Implement the debug hook for the buddy resource manager. For this we
want to print out the status of the memory manager, including how much
memory is still allocatable, what page sizes we have etc. This will be
triggered when TTM is unable to fulfil an allocation request for device
local-memory.

v2(Thomas):
    - s/MB/MiB
    - s/KB/KiB

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210819093419.295636-1-matthew.auld@intel.com

drm/i915: Ditch the i915_gem_ww_ctx loop member

It's only used by the for_i915_gem_ww() macro and we can use
the (typically) on-stack _err variable in its place.

v2:
- Don't clear the _err variable when entering the loop
  (Matthew Auld, Maarten Lankhorst).
- Use parentheses around the _err macro argument.
- Fix up comment.

Cc: Matthew Auld <matthew.william.auld@gmail.com>
Suggested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210816171444.105469-1-thomas.hellstrom@linux.intel.com

drm/i915: Fix syncmap memory leak

A small race exists between intel_gt_retire_requests_timeout and
intel_timeline_exit which could result in the syncmap not getting
free'd. Rather than work to hard to seal this race, simply cleanup the
syncmap on fini.

unreferenced object 0xffff88813bc53b18 (size 96):
  comm "gem_close_race", pid 5410, jiffies 4294917818 (age 1105.600s)
  hex dump (first 32 bytes):
    01 00 00 00 00 00 00 00 00 00 00 00 0a 00 00 00  ................
    00 00 00 00 00 00 00 00 6b 6b 6b 6b 06 00 00 00  ........kkkk....
  backtrace:
    [<00000000120b863a>] __sync_alloc_leaf+0x1e/0x40 [i915]
    [<00000000042f6959>] __sync_set+0x1bb/0x240 [i915]
    [<0000000090f0e90f>] i915_request_await_dma_fence+0x1c7/0x400 [i915]
    [<0000000056a48219>] i915_request_await_object+0x222/0x360 [i915]
    [<00000000aaac4ee3>] i915_gem_do_execbuffer+0x1bd0/0x2250 [i915]
    [<000000003c9d830f>] i915_gem_execbuffer2_ioctl+0x405/0xce0 [i915]
    [<00000000fd7a8e68>] drm_ioctl_kernel+0xb0/0xf0 [drm]
    [<00000000e721ee87>] drm_ioctl+0x305/0x3c0 [drm]
    [<000000008b0d8986>] __x64_sys_ioctl+0x71/0xb0
    [<0000000076c362a4>] do_syscall_64+0x33/0x80
    [<00000000eb7a4831>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Fixes: 531958f6f357 ("drm/i915/gt: Track timeline activeness in enter/exit")
Cc: <stable@vger.kernel.org>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730195342.110234-1-matthew.brost@intel.com

drm/i915/dg2: Maintain backward-compatible nested batch behavior

For tgl+, the per-context setting of MI_MODE[12] determines whether
the bits of a nested MI_BATCH_BUFFER_START instruction should be
interpreted in the traditional manner or whether they should
instead use a new tgl+ meaning that breaks backward compatibility, but
allows nesting into 3rd-level batchbuffers.  For previous platforms,
the hardware default for this register bit is to maintain
backward-compatible behavior unless a context intentionally opts into
the new behavior; however Xe_HPG flips the hardware default behavior.

From a SW perspective, we want to maintain the backward-compatible
behavior for userspace, so we'll apply a fake workaround to set it back
to the legacy behavior on platforms where the hardware default is to
break compatibility.  At the moment there is no Linux userspace that
utilizes third-level batchbuffers, so this will avoid userspace from
needing to make any changes.  using the legacy meaning is the correct
thing to do.  If/when we have userspace consumers that want to utilize
third-level batch nesting, we can provide a context parameter to allow
them to opt-in.

Bspec: 45974, 45718
Cc: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210805163647.801064-9-matthew.d.roper@intel.com
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>

drm/i915: Use designated initializers for init/exit table

The kernel builds with -Werror=designated-init, and __designated_init
is used by CONFIG_GCC_PLUGIN_RANDSTRUCT for automatically selected (all
function pointer) structures. Include the field names in the init/exit
table. Avoids warnings like:

drivers/gpu/drm/i915/i915_module.c:59:4: error: positional initialization of field in 'struct' declared with 'designated_init' attribute [-Werror=designated-init]

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Fixes: a04ea6ae7c67 ("drm/i915: Use a table for i915_init/exit (v2)")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210817233357.2379455-1-keescook@chromium.org

drm/i915: Add pci ids and uapi for DG1

DG1 has support for local memory, which requires the usage of the
lmem placement extension for creating bo's, and memregion queries
to obtain the size. Because of this, those parts of the uapi are
no longer guarded behind FAKE_LMEM.

According to the pull request referenced below, mesa should be mostly
ready for DG1. VK_EXT_memory_budget is not hooked up yet, but we
should definitely just enable the uapi parts by default.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
References: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11584
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210812124452.622233-2-maarten.lankhorst@linux.intel.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>

drm/i915/xehpsdv: Read correct RP_STATE_CAP register

The RP_STATE_CAP register is no longer part of the MCHBAR on XEHPSDV; this
register is now a per-tile register at GTTMMADDR offset 0x250014.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210805163647.801064-7-matthew.d.roper@intel.com

drm/i915/xehpsdv: factor out function to read RP_STATE_CAP

Instead of maintaining the same if ladder in 3 different places, add a
function to read RP_STATE_CAP.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210805163647.801064-6-matthew.d.roper@intel.com

drm/i915: Use locked access to ctx->engines in set_priority

This essentially reverts

commit 89ff76bf9b3b0b86e6bbe344bd6378d8661303fc
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Thu Apr 2 13:42:18 2020 +0100

    drm/i915/gem: Utilize rcu iteration of context engines

Note that the other use of __context_engines_await have disappeard in
the following commits:

ccbc1b97948a ("drm/i915/gem: Don't allow changing the VM on running contexts (v4)")
c7a71fc8ee04 ("drm/i915: Drop getparam support for I915_CONTEXT_PARAM_ENGINES")
4a766ae40ec8 ("drm/i915: Drop the CONTEXT_CLONE API (v2)")

None of these have any business to optimize their engine lookup with
rcu, unless extremely convincing benchmark data and a solid analysis
why we can't make that workload (whatever it is that does) faster with
a proper design fix.

Also since there's only one caller of context_apply_all left and it's
really just a loop, inline it and then inline the lopp body too. This
is how all other callers that take the engine lock loop over engines,
it's much simpler.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210810130523.1972031-1-daniel.vetter@ffwll.ch

drm/i915/xehpsdv: Add compute DSS type

Starting in XeHP, the concept of slice has been removed in favor of
DSS (Dual-Subslice) masks for various workload types. These workloads have
been divided into those enabled for geometry and those enabled for compute.

i915 currently maintains a single set of S/SS/EU masks for the device.
The goal of this patch set is to minimize the amount of impact to prior
generations while still giving the user maximum flexibility.

v2:
 - Generalize a comment about uapi access to geometry/compute masks; the
   proposed uapi has changed since the comment was first written, and
   will show up in a future series once the userspace code is published.
   (Lucas)

v3:
 - Eliminate unnecessary has_compute_dss flag.  (Lucas)
 - Drop unwanted comment change in uapi header.  (Lucas)

Bspec: 33117, 33118, 20376
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Steve Hampson <steven.t.hampson@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210806172901.1049133-1-matthew.d.roper@intel.com

drm/i915/dg2: Report INSTDONE_GEOM values in error state

Xe_HPG adds some additional INSTDONE_GEOM debug registers; the Mesa team
has indicated that having these reported in the error state would be
useful for debugging GPU hangs.  These registers are replicated per-DSS
with gslice steering.

Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210805163647.801064-4-matthew.d.roper@intel.com

drm/i915/xehp: Loop over all gslices for INSTDONE processing

We no longer have traditional slices on Xe_HP platforms, but the
INSTDONE registers are replicated according to gslice representation
which is similar.  We can mostly re-use the existing instdone code with
just a few modifications:

 * Create an alternate instdone loop macro that will iterate over the
   flat DSS space, but still provide the gslice/dss steering values for
   compatibility with the legacy code.

 * We should allocate INSTDONE storage space according to the maximum
   number of gslices rather than the maximum number of legacy slices to
   ensure we have enough storage space to hold all of the values.  XeHP
   design has 8 gslices, whereas older platforms never had more than 3
   slices.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210805163647.801064-3-matthew.d.roper@intel.com

drm/doc/rfc: drop lmem uapi section

We still have quite a bit more work to do with overall reworking of
the ttm-based dg1 code, but the uapi stuff is now finalized with the
latest pull. So remove that.

This also fixes kerneldoc build warnings because we've included the
same headers in two places, resulting in sphinx complaining about
duplicated symbols. This regression has been created when we moved the
uapi definitions to the real include/uapi/ folder in 727ecd99a4c9
("drm/doc/rfc: drop the i915_gem_lmem.h header")

v2: Fix a few references that I missed, the htmldocs build took
forever.

Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tested-by Stephen Rothwell <sfr@canb.auug.org.au> (v1)
References: https://lore.kernel.org/dri-devel/20210603193242.1ce99344@canb.auug.org.au/
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 727ecd99a4c9 ("drm/doc/rfc: drop the i915_gem_lmem.h header")
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210810142748.1983271-1-daniel.vetter@ffwll.ch

drm/i915/xehp: Xe_HP shadowed registers are a strict superset of gen12

The list of shadowed registers on XeHP is identical to the set for
earlier gen12 platforms, with additional ranges added for the new VCS
and VECS engines.  Since those register ranges were reserved on earlier
gen12 platforms, it's safe to consolidate to a single gen12 table
rather than tracking Xe_HP separately.

Bspec: 52077
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Caz Yokoyama <caz.yokoyama@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210729054118.2458523-7-matthew.d.roper@intel.com

drm/i915/gen12: Update shadowed register table

The bspec lists many shadowed registers (i.e., registers for which we
don't need to grab forcewake when writing) that we weren't tracking in
the driver.  Although we may not actually use all of these registers
right now, it's best to just match the bspec list exactly.

Note that the bspec also lists registers that are shadowed for various
HW-internal accesses; we can ignore those and just list the ones that
are shadowed for accesses from the IA/CPU.

Bspec: 52077
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Caz Yokoyama <caz.yokoyama@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210729054118.2458523-6-matthew.d.roper@intel.com

drm/i915/gen11: Update shadowed register table

The bspec lists many shadowed registers (i.e., registers for which we
don't need to grab forcewake when writing) that we weren't tracking in
the driver.  Although we may not actually use all of these registers
right now, it's best to just match the bspec list exactly.

Note that the bspec also lists registers that are shadowed for various
HW-internal accesses; we can ignore those and just list the ones that
are shadowed for accesses from the IA/CPU.

Bspec: 18333
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Caz Yokoyama <caz.yokoyama@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210729054118.2458523-5-matthew.d.roper@intel.com

drm/i915: Make shadow tables range-based

Rather than defining our shadow tables as a list of individual
registers, provide them as a list of register ranges; we'll have some
ranges of multiple registers being added soon (and we already have a
couple adjacent registers that we can squash into a single range now).

This change also defines the table with hex literal values rather than
symbolic register names; since that's how the tables are defined in the
bspec, this change will make it easier to review the tables overall.

v2:
 - Force signed comparison on range overlap sanity check

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Caz Yokoyama <caz.yokoyama@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210729152158.2646246-1-matthew.d.roper@intel.com

drm/i915: Re-use gen11 forcewake read functions on gen12

The forcewake read logic is identical between gen11 and gen12, only the
forcewake table data (which is tracked separately) differs; there's no
need to generate a separate set of gen12 read functions when the gen11
functions will work just as well.

We'll keep the separate write functions for now since the generated code
directly references different shadow tables between the two platforms.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Caz Yokoyama <caz.yokoyama@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210729054118.2458523-3-matthew.d.roper@intel.com

drm/i915: correct name of GT forcewake domain in error messages

For historical reasons, the GT forcewake domain used to be referred to
as the "blitter" domain; that name is no longer accurate since the GT
domain contains a lot of additional registers and functionality besides
just the blitter.  Although we renamed the domain in the driver in
commit 55e3c170950f ("drm/i915: Rename FORCEWAKE_BLITTER to
FORCEWAKE_GT"), we neglected to update the string that gets printed in
driver error messages; let's do that now to avoid confusion.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Caz Yokoyama <caz.yokoyama@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210729054118.2458523-2-matthew.d.roper@intel.com

drm/i915: Disable bonding on gen12+ platforms

Disable bonding on gen12+ platforms aside from ones already supported by
the i915 - TGL, RKL, and ADL-S.

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210728192100.132425-1-matthew.brost@intel.com

drm/i915/dg2: Add SQIDI steering

Although DG2_G10 platforms will always have all SQIDI's present and
don't need steering for registers in a SQIDI MMIO range, this isn't true
for DG2_G11 platforms; only SQIDI's 2 and 3 can be used on those.

We handle SQIDI ranges a bit differently from other types of explicit
steering.  The SQIDI ranges belong to either the MCFG unit or the SF
unit, both of which have their own dedicated steering registers and do
not use the typical 0xFDC steering control that all other types of
ranges use.  Thus we only need to worry about picking a valid initial
value for the MCFG and SF steering registers (0xFD0 and 0xFD8
respectively) at driver init; they won't change after we set them up so
we don't need to worry about re-steering them explicitly at runtime.

Given that any SQIDI value should work fine for DG2-G10 and XeHP SDV,
while only values of 2 and 3 are valid for DG2-G11, we'll just
initialize the MCFG and SF steering registers to a constant value of "2"
for all XeHP-based platforms for simplicity --- that will work in all
cases.

Bspec: 66534
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210729170008.2836648-6-matthew.d.roper@intel.com

drm/i915/dg2: Update steering tables

DG2's replicated register ranges are almost the same at XeHP SDV with
the exception of one LNCF sub-range that switches to gslice steering.
We can re-use the XeHP SDV mslice steering table and just provide a
DG2-specific LNCF steering table.

Bspec: 66534
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210729170008.2836648-5-matthew.d.roper@intel.com

drm/i915/xehpsdv: Define steering tables

Define and initialize the MMIO ranges for which XeHP SDV requires MSLICE
and LNCF steering.

Bspec: 66534
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210729170008.2836648-3-matthew.d.roper@intel.com

drm/i915/xehp: handle new steering options

Xe_HP is more modular than its predecessors and as a consequence it has
more types of replicated registers.  As with l3bank regions on previous
platforms, we may need to explicitly re-steer accesses to these new
types of ranges at runtime if we can't find a single default steering
value that satisfies the fusing of all types.

v2:
 - Add a local 'i915' variable to reduce gt->i915 usage.  (Caz)
 - Drop unused 'intel_gt_read_register' prototype.  (Caz)

v3:
 - Drop unnecessary comment text.  (Lucas)
 - Drop unused register bit definition.  (Lucas)

Bspec: 66534
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Caz Yokoyama <caz.yokoyama@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210729170008.2836648-2-matthew.d.roper@intel.com

drm/i915/userptr: Probe existence of backing struct pages upon creation

Jason Ekstrand requested a more efficient method than userptr+set-domain
to determine if the userptr object was backed by a complete set of pages
upon creation. To be more efficient than simply populating the userptr
using get_user_pages() (as done by the call to set-domain or execbuf),
we can walk the tree of vm_area_struct and check for gaps or vma not
backed by struct page (VM_PFNMAP). The question is how to handle
VM_MIXEDMAP which may be either struct page or pfn backed...

With discrete we are going to drop support for set_domain(), so offering
a way to probe the pages, without having to resort to dummy batches has
been requested.

v2:
- add new query param for the PROBE flag, so userspace can easily
  check if the kernel supports it(Jason).
- use mmap_read_{lock, unlock}.
- add some kernel-doc.
v3:
- In the docs also mention that PROBE doesn't guarantee that the pages
  will remain valid by the time they are actually used(Tvrtko).
- Add a small comment for the hole finding logic(Jason).
- Move the param next to all the other params which just return true.

Testcase: igt/gem_userptr_blits/probe
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723113405.427004-1-matthew.auld@intel.com

drm/i915: delete gpu reloc code

It's already removed, this just garbage collects it all.

v2: Rebase over s/GEN/GRAPHICS_VER/

v3: Also ditch eb.reloc_pool and eb.reloc_context (Maarten)

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803124833.3817354-2-daniel.vetter@ffwll.ch

drm/i915: Disable gpu relocations

Media userspace was the last userspace to still use them, and they
converted now too:

https://github.com/intel/media-driver/commit/144020c37770083974bedf59902b70b8f444c799

This means no reason anymore to make relocations faster than they've
been for the first 9 years of gem. This code was added in

commit 7dd4f6729f9243bd7046c6f04c107a456bda38eb
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Fri Jun 16 15:05:24 2017 +0100

    drm/i915: Async GPU relocation processing

Furthermore there's pretty strong indications it's buggy, since the
code to use it by default as the only option had to be reverted:

commit ad5d95e4d538737ed3fa25493777decf264a3011
Author: Dave Airlie <airlied@redhat.com>
Date:   Tue Sep 8 15:41:17 2020 +1000

    Revert "drm/i915/gem: Async GPU relocations only"

This code just disables gpu relocations, leaving the garbage
collection for later patches and more importantly, much less confusing
diff. Also given how much headaches this code has caused in the past,
letting this soak for a bit seems justified.

Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803124833.3817354-1-daniel.vetter@ffwll.ch

drm/i915/dg2: DG2 uses the same sseu limits as XeHP SDV

DG2 supports compute DSS and has the same maximum number of DSS and EU
as XeHP SDV.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Caz Yokoyama <caz.yokoyama@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210729170008.2836648-12-matthew.d.roper@intel.com

drm/i915/xehpsdv: Add maximum sseu limits

Due to the removal of legacy slices and the transition to a
gslice/cslice/mslice/etc. design, we'll internally store all DSS under
"slice0."

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Caz Yokoyama <caz.yokoyama@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210729170008.2836648-10-matthew.d.roper@intel.com

drm/i915/xehp: Changes to ss/eu definitions

Xe_HP no longer has "slices" in the same way that old platforms did.
There are new concepts (gslices, cslices, mslices) that apply in various
contexts, but for the purposes of fusing slices no longer exist and we
just have one large pool of dual-subslices (DSS) to work with.
Furthermore, the meaning of the DSS fuse is inverted compared to past
platforms --- it now specifies which DSS are enabled rather than which
ones are disabled.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Prasad Nallani <prasad.nallani@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210729170008.2836648-9-matthew.d.roper@intel.com

drm/i915/dg2: Add forcewake table

The DG2 forcewake table is very similar to the one used by XeHP SDV (and
both platforms are even presented as a single table in the bspec).  For
the most part DG2 starts using a few additional ranges that were
'reserved' on XeHP SDV and stops using some others.  However there is a
single range (0xd800-0xd87f) that needs to be handled differently
between the two platforms (it needs GT wake on XeHP SDV, but render wake
on DG2) so unless we want to wake both domains (which could waste power)
or define new types of forcewake domains for this special case we need
to have separate tables for the two platforms.  Let's define the ranges
for both platforms with a parameterized macro so that we don't actually
need to duplicate everything in the code.

It should be fine for DG2 to re-use the Xe_HP shadow register list so we
can continue to use the 'xehpsdv' MMIO write functions and don't need to
spin up a separate DG2 instance.

Bspec: 66534
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210729170008.2836648-4-matthew.d.roper@intel.com

drm/i915/guc/rc: Setup and enable GuCRC feature

This feature hands over the control of HW RC6 to the GuC.
GuC decides when to put HW into RC6 based on it's internal
busyness algorithms.

GuCRC needs GuC submission to be enabled, and only
supported on Gen12+ for now.

When GuCRC is enabled, do not set HW RC6. Use a H2G message
to tell GuC to enable GuCRC. When disabling RC6, tell GuC to
revert RC6 control back to KMD. KMD is still responsible for
enabling everything related to Coarse Power Gating though.

v2: Address comments (Michal W)
v3: Don't set hysterisis values when GuCRC is used (Matt Roper)
v4: checkpatch()

Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-15-vinay.belgaumkar@intel.com

drm/i915/guc/slpc: Add SLPC selftest

Tests that exercise the SLPC get/set frequency interfaces.

Clamp_max will set max frequency to multiple levels and check
that SLPC requests frequency lower than or equal to it.

Clamp_min will set min frequency to different levels and check
if SLPC requests are higher or equal to those levels.

v2: Address review comments (Michal W)
v3: Checkpatch() corrections
v4: Remove unnecessary header file (Matthew Brost)
v5: checkpatch() and define const for 50/3 (Matthew Brost)

Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-14-vinay.belgaumkar@intel.com

drm/i915/guc/slpc: Sysfs hooks for SLPC

Update the get/set min/max freq hooks to work for
SLPC case as well. Consolidate helpers for requested/min/max
frequency get/set to intel_rps where the proper action can
be taken depending on whether SLPC is enabled.

v2: Add wrappers for getting rp0/1/n frequencies, update
softlimits in set min/max SLPC functions. Also check for
boundary conditions before setting them.

v3: Address review comments (Michal W)

v4: Add helper for host part of intel_rps_set_freq helpers (Michal W)

v5: checkpatch()

Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Acked-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-13-vinay.belgaumkar@intel.com

drm/i915/guc/slpc: Cache platform frequency limits

Cache rp0, rp1 and rpn platform limits into SLPC structure
for range checking while setting min/max frequencies.

Also add "soft" limits which keep track of frequency changes
made from userland. These are initially set to platform min
and max.

v2: Address review comments (Michal W)
v3: Formatting (Michal W)
v4: Add separate function to parse rp values (Michal W)
v5: Perform range checking for set min/max (Michal W)
v6: checkpatch() and rename static functions (Michal W)
v7: check ret code while setting SLPC limits (Michal W)

Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-12-vinay.belgaumkar@intel.com

drm/i915/guc/slpc: Enable ARAT timer interrupt

This interrupt is enabled during RPS initialization, and
now needs to be done by SLPC code. It allows ARAT timer
expiry interrupts to get forwarded to GuC.

v2: Fix comment (Matthew Brost)
v3: checkpatch()

Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-11-vinay.belgaumkar@intel.com

drm/i915/guc/slpc: Add debugfs for SLPC info

This prints out relevant SLPC info from the SLPC shared structure.

We will send a H2G message which forces SLPC to update the
shared data structure with latest information before reading it.

v2: Address review comments (Michal W)
v3: Remove unnecessary tasks from slpc_info (Michal W)
v4: Rename function to intel_guc_slpc_print_info() (Michal W)
v5: checkpatch()

Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Sundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-10-vinay.belgaumkar@intel.com

drm/i915/guc/slpc: Add get max/min freq hooks

Add helpers to read the min/max frequency being used
by SLPC. This is done by send a H2G command which forces
SLPC to update the shared data struct which can then be
read. These helpers will be used in a sysfs patch later
on.

v2: Address review comments (Michal W)
v3: Return err in case of query failure (Michal W)
v4: Move decode_min/max_freq to this patch

Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Sundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-9-vinay.belgaumkar@intel.com

drm/i915/guc/slpc: Add methods to set min/max frequency

Add param set h2g helpers to set the min and max frequencies
for use by SLPC.

v2: Address review comments (Michal W)
v3: Check for positive error code (Michal W)
v4: Print generic error in set_param (Michal W)

Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Sundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-8-vinay.belgaumkar@intel.com

drm/i915/guc/slpc: Remove BUG_ON in guc_submission_disable

The assumption when it was added was that GT would not be
holding any gt_pm references. However, uc_init is called
from gt_init_hw, which holds a forcewake ref. If SLPC
enable fails, we will still be holding this ref, which will
result in the BUG_ON.

Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-7-vinay.belgaumkar@intel.com

drm/i915/guc/slpc: Enable SLPC and add related H2G events

Add methods for interacting with GuC for enabling SLPC. Enable
SLPC after GuC submission has been established. GuC load will
fail if SLPC cannot be successfully initialized. Add various
helper methods to set/unset the parameters for SLPC. They can
be set using H2G calls or directly setting bits in the shared
data structure.

v2: Address several review comments, add new helpers for
decoding the SLPC min/max frequencies. Use masks instead of hardcoded
constants. (Michal W)

v3: Split global_state_to_string function, and check for positive
non-zero return value from intel_guc_send() (Michal W)

v4: Optimize the stringify function and other comments (Michal W)

v5: Enable slpc as well before declaring GuC submission status (Michal W)

v6: Checkpatch()

Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Sundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-6-vinay.belgaumkar@intel.com

drm/i915/guc/slpc: Allocate, initialize and release SLPC

Allocate data structures for SLPC and functions for
initializing on host side.

v2: Address review comments (Michal W)
v3: Remove unnecessary header includes (Michal W)
v4: Rebase
v5: Move allocation of shared data into slpc_init() (Michal W)

Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Sundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-5-vinay.belgaumkar@intel.com

drm/i915/guc/slpc: Adding SLPC communication interfaces

Add constants and params that are needed to configure SLPC.

v2: Add a new abi header for SLPC. Replace bitfields with
genmasks. Address other comments from Michal W.

v3: Add slpc H2G format in abi, other review commments (Michal W)

v4: Update status bits according to latest spec

v5: checkpatch()

Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Sundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-4-vinay.belgaumkar@intel.com

drm/i915/guc/slpc: Gate Host RPS when SLPC is enabled

Also ensure uc_init is called before we initialize RPS so that we
can check for SLPC support. We do not need to enable up/down
interrupts when SLPC is enabled. However, we still need the ARAT
interrupt, which will be enabled separately later.

v2: Explicitly return from intel_rps_enable with slpc check (Matthew B)

Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Sundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-3-vinay.belgaumkar@intel.com

drm/i915/guc/slpc: Initial definitions for SLPC

Add macros to check for SLPC support. This feature is currently supported
for Gen12+ and enabled whenever GuC submission is enabled/selected.

Include templates for SLPC init/fini and enable.

v2: Move SLPC helper functions to intel_guc_slpc.c/.h. Define
basic template for SLPC structure in intel_guc_slpc_types.h.
Fix copyright (Michal W)

v3: Review comments (Michal W)

v4: Include supported/selected inside slpc struct (Michal W)

Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Sundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-2-vinay.belgaumkar@intel.com

drm/i915/xehp: Fix missing sentinel on mcr_ranges_xehp

There's a missing sentinel since we are not using ARRAY_SIZE(), but rather
checking that the .start is 0 to stop the iteration in mcr_range().

BUG: KASAN: global-out-of-bounds in mcr_range.isra.0+0x69/0xa0 [i915]
Read of size 4 at addr ffffffffa0889928 by task modprobe/3881

Fixes: d8905ba705ab ("drm/i915/xehp: Define multicast register ranges")
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730191115.2514581-1-lucas.demarchi@intel.com

drm/i915/selftests: prefer the create_user helper

No need to hand roll the set_placements stuff, now that we have a helper
for this.

v2: add back the -ENODEV checking since it's possible for stolen to be
probed, and yet still be non-functional

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210729094731.1953091-1-matthew.auld@intel.com

drm/i915/gt: remove GRAPHICS_VER == 10

Replace all remaining handling of GRAPHICS_VER {==,>=} 10 with
{==,>=} 11. With the removal of CNL, there is no platform with graphics
version equals 10.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210728220326.1578242-5-lucas.demarchi@intel.com

drm/i915/gt: rename CNL references in intel_engine.h

With the removal of CNL, let's consider ICL as the first platform using
that index.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210728220326.1578242-4-lucas.demarchi@intel.com

drm/i915/gt: remove explicit CNL handling from intel_sseu.c

CNL is the only platform with GRAPHICS_VER == 10. With its removal we
don't need to handle that version anymore.

Also we can now reduce the max number of slices: the call to
intel_sseu_set_info() with the highest number of slices comes from SKL
and BDW with 3 slices. Recent platforms actually increase the
number of subslices so the number of slices remain 1.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210728220326.1578242-3-lucas.demarchi@intel.com

drm/i915/gt: remove explicit CNL handling from intel_mocs.c

Only one reference to CNL that is not needed, but code is the same for
GEN9_BC, so leave the code around and just remove the special
case for CNL.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210728220326.1578242-2-lucas.demarchi@intel.com

drm/i915: Extract i915_module.c

The module init code is somewhat misplaced in i915_pci.c, since it
needs to pull in init/exit functions from every part of the driver and
pollutes the include list a lot.

Extract an i915_module.c file which pulls all the bits together, and
allows us to massively trim the include list of i915_pci.c.

The downside is that have to drop the error path check Jason added to
catch when we set up the pci driver too early. I think that risk is
acceptable for this pretty nice include.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727121037.2041102-11-daniel.vetter@ffwll.ch

drm/i915: Remove i915_globals

No longer used.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727121037.2041102-10-daniel.vetter@ffwll.ch

drm/i915: move vma slab to direct module init/exit

With the global kmem_cache shrink infrastructure gone there's nothing
special and we can convert them over.

I'm doing this split up into each patch because there's quite a bit of
noise with removing the static global.slab_vmas to just a
slab_vmas.

We have to keep i915_drv.h include in i915_globals otherwise there's
nothing anymore that pulls in GEM_BUG_ON.

v2: Make slab static (Jason, 0day)

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727121037.2041102-9-daniel.vetter@ffwll.ch

drm/i915: move scheduler slabs to direct module init/exit

With the global kmem_cache shrink infrastructure gone there's nothing
special and we can convert them over.

I'm doing this split up into each patch because there's quite a bit of
noise with removing the static global.slab_dependencies|priorities to just a
slab_dependencies|priorities.

v2: Make slab static (Jason, 0day)

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727121037.2041102-8-daniel.vetter@ffwll.ch

drm/i915: move request slabs to direct module init/exit

With the global kmem_cache shrink infrastructure gone there's nothing
special and we can convert them over.

I'm doing this split up into each patch because there's quite a bit of
noise with removing the static global.slab_requests|execute_cbs to just a
slab_requests|execute_cbs.

v2: Make slab static (Jason, 0day)

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727121037.2041102-7-daniel.vetter@ffwll.ch

drm/i915: move gem_objects slab to direct module init/exit

With the global kmem_cache shrink infrastructure gone there's nothing
special and we can convert them over.

I'm doing this split up into each patch because there's quite a bit of
noise with removing the static global.slab_objects to just a
slab_objects.

v2: Make slab static (Jason, 0day)

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727121037.2041102-6-daniel.vetter@ffwll.ch

drm/i915: move gem_context slab to direct module init/exit

With the global kmem_cache shrink infrastructure gone there's nothing
special and we can convert them over.

I'm doing this split up into each patch because there's quite a bit of
noise with removing the static global.slab_luts to just a
slab_luts.

v2: Make slab static (Jason, 0day)

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727121037.2041102-5-daniel.vetter@ffwll.ch

drm/i915: move intel_context slab to direct module init/exit

With the global kmem_cache shrink infrastructure gone there's nothing
special and we can convert them over.

I'm doing this split up into each patch because there's quite a bit of
noise with removing the static global.slab_ce to just a
slab_ce.

v2: Make slab static (Jason, 0day)

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727121037.2041102-4-daniel.vetter@ffwll.ch

drm/i915: move i915_buddy slab to direct module init/exit

With the global kmem_cache shrink infrastructure gone there's nothing
special and we can convert them over.

I'm doing this split up into each patch because there's quite a bit of
noise with removing the static global.slab_blocks to just a
slab_blocks.

v2: Make slab static (Jason, 0day)

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727121037.2041102-3-daniel.vetter@ffwll.ch

drm/i915: move i915_active slab to direct module init/exit

With the global kmem_cache shrink infrastructure gone there's nothing
special and we can convert them over.

I'm doing this split up into each patch because there's quite a bit of
noise with removing the static global.slab_cache to just a slab_cache.

v2: Make slab static (Jason, 0day)

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727121037.2041102-2-daniel.vetter@ffwll.ch

drm/i915: Check for nomodeset in i915_init() first

When modesetting (aka the full pci driver, which has nothing to do
with disable_display option, which just gives you the full pci driver
without the display driver) is disabled, we load nothing and do
nothing.

So move that check first, for a bit of orderliness. With Jason's
module init/exit table this now becomes trivial.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727121037.2041102-1-daniel.vetter@ffwll.ch

drm/i915/xehpsdv: Correct parameters for IS_XEHPSDV_GT_STEP()

During a rebase the parameters were partially renamed, but not
completely.  Since the subsequent patches that start using this macro
haven't landed on an upstream tree yet this didn't cause a build
failure.

Fixes: 086df54e20be ("drm/i915/xehpsdv: add initial XeHP SDV definitions")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Caz Yokoyama <caz.yokoyama@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723174239.1551352-2-matthew.d.roper@intel.com

drm/i915/guc: Unblock GuC submission on Gen11+

Unblock GuC submission on Gen11+ platforms.

v2:
 (Martin Peres / John H)
  - Delete debug message when GuC is disabled by default on certain
    platforms

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-34-matthew.brost@intel.com