drm/amdgpu: Refine function amdgpu_device_ip_late_init

1. only call late_init when hw_init successful,
   so check status.hw instand of status.valid in late_init.
2. set status.late_initialized true if late_init was not implemented.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Change AI gfx/sdma/smu init sequence

initialize gfx/sdma before dpm features enabled.

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Change SI/CI gfx/sdma/smu init sequence

initialize gfx/sdma before dpm features enabled.

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Limit the max mc address to hole start

For the vram_start is 0 case, the gart range will be from 0x0000FFFF00000000
to 0x0000FFFF1FFFFFFF, which will cause the engine hang.

So to avoid the hole, limit the max mc address to AMDGPU_GMC_HOLE_START.:wq

Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix CPDMA hang in PRT mode

Fix CPDMA hang in PRT mode, set CPF_INT_DMA in reg CP_MECx_F32_INT_DIS for Compute and set DISABLE_GFX_HALT_ON_UTCL1_ERROR in reg CP_DEBUG for GFX

Affected ASICs: Vega10 Vega12 Raven

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Tested-by: Yukun.Li <yukun1.li@amd.com>
Tested-by: Maciej.Jesionowski <maciej.jesionowski@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add CP_DEBUG register definition for GC9.0

Add CP_DEBUG register definition.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: RV2 DP MST 2nd display within daisy chain not light up

RV2 resource is limit to 3 pipes. Limitation should apply to all HW
blocks instead of front pipe.

Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix warning storm on Raven2

[Why]
Wrong index for pstate debug test register

[How]
Add correct index value for dcn1_01 in hubbub1_construct()

Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Change VI gfx/sdma/smu init sequence

initialize gfx/sdma before dpm features enabled.

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add fw load in gfx_v8 and sdma_v3

gfx and sdma can be initialized before smu.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Implement load_firmware interface

with this interface, gfx/sdma can be initialized
before smu.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Allocate ucode bo in request_smu_load_fw

ucode bo is needed by request_smu_load_fw,
the request_smu_load_fw maybe called by gfx/sdma
before smu hw init.
so move amdgpu_ucode_bo_init to request_smu_lowd_fw
from smu hw init.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Don't reallocate ucode bo when suspend

driver don't release the ucode memory when suspend. so don't
need to allocate bo when resume back.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove FW_LOAD_DIRECT type support on VI

AMDGPU_FW_LOAD_DIRECT is used for bring up.
Now it don't work any more. so remove the support.

v2: Add warning message if user select
   AMDGPU_FW_LOAD_DIRECT/AMDGPU_FW_LOAD_PSP on VI.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn:Correct VCN cache window definition

Correct VCN cache window definition. The old one
is reused from UVD, and it is not fully correct.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn:Replace value with defined macro

Replace value with defined macro to make
code more readable

Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn:fix dpg pause mode hang issue

Use mmUVD_SCRATCH2 tracking decode write point.
It will help avoid dpg pause mode hang issue.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn:Remove unused code

The following WREG32_SOC15_DPG_MODE will overwrite register
mmUVD_CGC_CTRL. This code can be removed.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: ratelimit bo warnings

So a few days ago I started getting sprays of these warnings --
sorry, but because it was a few days ago I'm not sure what I was
running at the time (but it was probably either Stellaris or Chromium).

Sep 25 22:06:34 mutilate err: : [  544.718905] [drm:radeon_cs_parser_relocs] *ERROR* gem object lookup failed 0xc
Sep 25 22:06:34 mutilate err: : [  544.718909] [drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation -2!
Sep 25 22:06:34 mutilate err: : [  544.719710] [drm:radeon_cs_parser_relocs] *ERROR* gem object lookup failed 0xc
Sep 25 22:06:34 mutilate err: : [  544.719714] [drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation -2!
Sep 25 22:06:34 mutilate err: : [  544.719862] [drm:radeon_cs_parser_relocs] *ERROR* gem object lookup failed 0xc
Sep 25 22:06:34 mutilate err: : [  544.719865] [drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation -2!
Sep 25 22:06:34 mutilate err: : [  544.720772] [drm:radeon_cs_parser_relocs] *ERROR* gem object lookup failed 0xc
Sep 25 22:06:34 mutilate err: : [  544.720778] [drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation -2!
Sep 25 22:06:34 mutilate warning: : [  544.721415] radeon 0000:01:00.0: vbo resource seems too big for the bo

followed by a massive stream of "vbo resource seems too big for the bo".

The most extreme flood ran from 23:01:58 to 23:02:47 and emitted 91,000
lines of log in that time.  This... seems excessive, given that each log
message after the first contains more or less no information.

So ratelimit these messages. (We probably want to see at least *some* so
that the underlying bug can be fixed -- always assuming the bug isn't in
unfixable closed-source game code somewhere.)

Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix incorrect use of amdgpu_irq_add_id in si_dma.c

Adding a second irq source because of a different src_id is actually a
bug.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix AGP location with VRAM at 0x0

That also simplifies handling quite a bit.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove the intterupt handling for the KIQ events

[Why]
1. we never submit IBs to the KIQ
2. there seems to be ~500ms delay during amdgpu resume spent in KIQ,
   hence pointing toward interrupts are not working correctly.

[How]
remove interrupt handling for KIQ.

Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>i
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Fix incorrect use of process->mm

This mm_struct pointer should never be dereferenced. If running in
a user thread, just use current->mm. If running in a kernel worker
use get_task_mm to get a safe reference to the mm_struct.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: skip IB tests for KIQ in general

[Why]
1. We never submit IBs to KIQ.
2. Ring test pass without KIQ's ring also.
3. By skipping we see an improvement of around 500ms
   in the amdgpu's resume time.

[How]
skip IB tests for KIQ ring type.

Signed-off-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/scheduler: Simplify spsc_queue_count check in drm_sched_entity_select_rq

Clang generates a warning when it sees a logical not followed by a
conditional operator like ==, >, or <.

drivers/gpu/drm/scheduler/sched_entity.c:470:6: warning: logical not is
only applied to the left hand side of this comparison
[-Wlogical-not-parentheses]
        if (!spsc_queue_count(&entity->job_queue) == 0 ||
            ^                                     ~~
drivers/gpu/drm/scheduler/sched_entity.c:470:6: note: add parentheses
after the '!' to evaluate the comparison first
        if (!spsc_queue_count(&entity->job_queue) == 0 ||
            ^
             (                                        )
drivers/gpu/drm/scheduler/sched_entity.c:470:6: note: add parentheses
around left hand side expression to silence this warning
        if (!spsc_queue_count(&entity->job_queue) == 0 ||
            ^
            (                                    )
1 warning generated.

It assumes the author might have made a mistake in their logic:

if (!a == b) -> if (!(a == b))

Sometimes that is the case; other times, it's just a super convoluted
way of saying 'if (a)' when b = 0:

if (!1 == 0) -> if (0 == 0) -> if (true)

Alternatively:

if (!1 == 0) -> if (!!1) -> if (1)

Simplify this comparison so that Clang doesn't complain.

Fixes: 35e160e781a0 ("drm/scheduler: change entities rq even earlier")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Refine smu7/8 request_smu_load_fw callback function

The request_smu_load_fw of VI is used to load gfx/sdma
ip's firmware.

Check whether the gfx/sdma firmware have been loaded successfully
in this callback function.
if failed, driver can exit to avoid gpu hard hung.
if successful, clean the flag reload_fw to avoid duplicated fw load.
when suspend/resume, driver need to reload fw.
so in suspend, reset the reload_fw flag to true to enable load fw when
resume.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Setup SoftRegsStart before request smu load fw

need to know SoftRegsStart value to visit the register
UcodeLoadStatus to check fw loading state.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Refine function iceland_start_smu

if upload firmware failed, no matter how many times
the function runs again, the same error will be encountered.
so remove the duplicated code.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Move gfx flag in_suspend to adev

Move in_suspend flag to adev from gfx, so
can be used in other ip blocks, also keep
consistent with gpu_in_reset flag.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Fix memory leak on CI/AI

On CI/AI, fw was not loaded by smu, but
smu's fw still need to be released
when driver fini.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Drop dead define in amdgpu.h

the struct was not in use any more.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Always enable fan sensors for read

don't need to set fan1_enable to read fan sensors.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Disable sysfs pwm1 if not in manual fan control

Following lm-sensors 3.0.0,
Only enable pwm1 sysfs when fan control mode(pwm1_enable)
in manual

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add fan RPM setting via sysfs

Add fan1_target for get/set fan speed in RPM unit
Add fan1_min/fan1_max for get min, max fan speed in RPM unit
Add fan1_enable to enable/disable the fan1 sensor

v3: drop the hardcode value of min/max rpm in comments pointed
    out by Alex.
v2: query the min/max rpm gpu support instand of hardcode value.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Implement AMDGPU_PP_SENSOR_MIN/MAX_FAN_RPM

so user can query the RPM range

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add new AMDGPU_PP_SENSOR_MIN/MAX_FAN_RPM sensor

For getting the min/max fan speed in RPM units.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Refine uvd_v6/7_0_enc_get_destroy_msg

1. make uvd_v7_0_enc_get_destroy_msg static
2. drop a function variable that always true

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Signal hw_done() after waiting for flip_done()

In amdgpu_dm_commit_tail(), wait until flip_done() is signaled before
we signal hw_done().

[Why]

This is to temporarily address a paging error that occurs when a
nonblocking commit contends with another commit, particularly in a
mirrored display configuration where at least 2 CRTCs are updated.
The error occurs in drm_atomic_helper_wait_for_flip_done(), when we
attempt to access the contents of new_crtc_state->commit.

Here's the sequence for a mirrored 2 display setup (irrelevant steps
left out for clarity):

**THREAD 1**                        | **THREAD 2**
                                    |
Initialize atomic state for flip    |
                                    |
Queue worker                        |
                                   ...

                                    | Do work for flip
                                    |
                                    | Signal hw_done() on CRTC 1
                                    | Signal hw_done() on CRTC 2
                                    |
                                    | Wait for flip_done() on CRTC 1

                                <---- **PREEMPTED BY THREAD 1**

Initialize atomic state for cursor  |
update (1)                          |
                                    |
Do cursor update work on both CRTCs |
                                    |
Clear atomic state (2)              |
**DONE**                            |
                                   ...
                                    |
                                    | Wait for flip_done() on CRTC 2
                                    | *ERROR*
                                    |

The issue starts with (1). When the atomic state is initialized, the
current CRTC states are duplicated to be the new_crtc_states, and
referenced to be the old_crtc_states. (The new_crtc_states are to be
filled with update data.)

Some things to note:

* Due to the mirrored configuration, the cursor updates on both CRTCs.

* At this point, the pflip IRQ has already been handled, and flip_done
  signaled on all CRTCs. The cursor commit can therefore continue.

* The old_crtc_states used by the cursor update are the **same states**
  as the new_crtc_states used by the flip worker.

At (2), the old_crtc_state is freed (*), and the cursor commit
completes. We then context switch back to the flip worker, where we
attempt to access the new_crtc_state->commit object. This is
problematic, as this state has already been freed.

(*) Technically, 'state->crtcs[i].state' is freed, which was made to
    reference old_crtc_state in drm_atomic_helper_swap_state()

[How]

By moving hw_done() after wait_for_flip_done(), we're guaranteed that
the new_crtc_state (from the flip worker's perspective) still exists.
This is because any other commit will be blocked, waiting for the
hw_done() signal.

Note that both the i915 and imx drivers have this sequence flipped
already, masking this problem.

Signed-off-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use proper enums in process_channel_reply

Clang warns when one enumerated type is implicitly converted to another.

drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c:315:19: warning:
implicit conversion from enumeration type 'enum
aux_channel_operation_result' to different enumeration type 'enum
aux_transaction_reply' [-Wenum-conversion]
                reply->status = AUX_CHANNEL_OPERATION_FAILED_HPD_DISCON;
                              ~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/i2caux/dce110/aux_engine_dce110.c:349:19:
warning: implicit conversion from enumeration type 'enum
aux_channel_operation_result' to different enumeration type 'enum
aux_transaction_reply' [-Wenum-conversion]
                reply->status = AUX_CHANNEL_OPERATION_FAILED_HPD_DISCON;
                              ~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

The current enum is incorrect, it should be from aux_transaction_reply,
so use AUX_TRANSACTION_REPLY_HPD_DISCON.

Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Raise dispclk value for dce_update_clocks

[Why]

The DISPCLK value was previously requested to be 15% higher for all
ASICS that went through the dce110 bandwidth code path. As part of a
refactoring of dce_clocks and dce110 set_bandwidth this was removed
for power saving considerations.

This changed caused corruption under certain display configurations.
Originally thought to be Vega specific, it was also observed on Polaris.

[How]

The 15% is brought back but its placement differs from the original
patch. This boost should only be enable while DFS bypass is inactive.

This (like the Vega patch) is also a workaround that should be
removed after the root cause is identified.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: HLK Periodic Frame Notification test failed

[Why]
Due to a small pre-fetch window, the active vline timing is a couple
of lines off when compared to what it should be.

[How]
Changed the calculation for the start vline to account for this window.

Signed-off-by: Murton Liu <murton.liu@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix Interlace video timing.

[Description] interlace mode shows wrong vertical timing.
Interface timing in Edid is half vertical timing as progressive timing.
driver doubled the vertical timing in edid_paser,
no need to double in optc again.

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Flatten irq handler data struct

[Why]
There is no reason why the common data needs to be kept separate.

[How]
Flatten the struct by moving common data into the DM IRQ struct.

Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix memory leak in resource pools

[why]
ddc engines were recently changed to be independently tracked
from pipe count.  the change was reflected in resource constructor
but not in destructor.  this manifests as a memory leak when
pipe harvesting is enabled, since not all constructed ddc engines
are freed

[how]
make destructor symmetric with constructor for all dcX_resource

Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: dc 3.1.68

Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Steven Chiu <Steven.Chiu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: WA for DF keeps awake after S0i3.

[Why]
DF keeps awake after S0i3 resume due to DRAM_STATE_CNTL
is set by bios command table during dcn init_hw.

[How]
As a work around, check STATE_CNTL status before init_hw,
if it is 0 before init_hw and set to 1 after init_hw,
change it to 0.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: clean up encoding checks

[Why]
All ASICS we support has YCbCr support, so
the check is unnecessary, the currently logic
in validate output also returns true all
the time, so the unneccessary logic is removed

Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: block DP YCbCr420 modes

[why]
Currently not supported, will black screen when set.

[How]
Fail validate timing helper for those modes.

Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add function to fetch clock requirements

Also add dram clock to clocks struct, for systems that uses them.

Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Calculate swizzle mode using bpp during validation

[Why]
Previously bandwidth validation was failing because swizzle mode was not
initialized during plane_state allocation. The swizzle mode was
calculated using pixed format which is how swizzle mode is initially
calculated in addrlib.

[How]
* Set default swizzle mode for validation to DC_SW_UNKNOWN
* Created new function in dcn10_assign_swizzle_mode which sets the
  plane swizzle mode based on selected pixed format
* Added the call of assign_swizzle_mode into dc_validate_global_state
* Set failsafe swizzle mode back to DC_SW_LINEAR

Signed-off-by: Su Sung Chung <Su.Chung@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add a check-function for virtual signal type

[why]
Same functions exist for all other signal types.

[how]
Add a function that checks against virtual signal type.

Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix 4K stereo screen flash issue

[Why]
HDMI_scramber is not enabled for pixel rate >340Mhz.
[How]
Calculate the phy clock to include the Hw frame packing factor.

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DC build_id to determine build type

[why]
Sometimes there are indications that the incorrect driver is being
loaded in automated tests. This change adds the ability for builds to
be tagged with a string, and picked up by the test infrastructure.

[how]
dc.c will allocate const for build id, which is init-ed with default
value, indicating production build. For test builds, build server will
find/replace this value. The test machine will then verify this value.

Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: Enable/Disable NBPSTATE on On/OFF of UVD

We observe black lines (underflow) on display when playing a
4K video with UVD. On Disabling Low memory P state this issue is
not seen.
Multiple runs of power measurement shows no imapct.

Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Signed-off-by: Satyajit Sahu <satyajit.sahu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amd/pp: Remove wrong code in fiji_start_smu

HW CG feature will be enabled after hw ip initialized

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Remove uncessary extra vcn pg cntl in smu

the vcn power will be controlled by VCN.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Move out power up/down sdma out of smu

smu only expose interface to other ip blocks.
in order to reduce dependence between smu and other ip blocks

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Expose the smu support for SDMA PG cntl

SDMA IP can be power up/down via smu message

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Avoid divide-by-zero in fan_ctrl_set_fan_speed_rpm

The minRPM speed maybe equal to zero. so need to check
input RPM not equal to 0, otherwise cause divide-by-zero driver crash.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Fix fan's RPM setting not work on VI/Vega10

set the target rpm value to wrong register.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix comments error in sdma_v4_1_update_power_gating

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: enable MGPU fan boost feature on Vega20

Added Vega20 specific implementation for MGPU fan boost
feature.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: helper interfaces for MGPU fan boost feature

MGPU fan boost feature is enabled only when two or more dGPUs
in the system.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: added AMD GPU instance counting V2

Count all GPU instances from AMD(including iGPUs and
dGPUs) in the system.

V2: drop unnecessary initialization for other gpu_info
    members except mutex

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vega20: make power profile output more consistent

Make the profile name line match previous generations more closely.

E.g.,
0 3D_FULL_SCREEN :
vs:
0(3D_FULL_SCREEN )

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: change Raven always on CUs to 4

For Vega10 and Vega20, the always on CUs are 12.
For Raven, it's 4.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: added vega20 LBPW support v2

Enable LBPW support on vega20.

v2: squash in warning fix (Alex)

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay/vega20: enable fan RPM and pwm settings V2

Manual fan RPM and pwm setting on vega20 are
available now.

V2: correct the register for fan speed setting and
    avoid divide-by-zero

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay/vega20: tell the correct gfx voltage V2

Export the correct gfx voltage by hwmon interface.

V2: update the register naming for consistency

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay/vega20: correct the hwmon interface ppt limit output

The ppt limit read out by hwmon interface is always 0.
Correct this hwmon interface output.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge branch 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld into drm-next

misc mali-dp updates.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003105009.GD1156@e110455-lin.cambridge.arm.com

Merge tag 'tilcdc-4.20' of https://github.com/jsarha/linux into drm-next

drm/tilcdc changes for Linux v4.20

suspend/resume update.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jyri Sarha <jsarha@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bd8d6b40-d3d6-8e24-9d48-6201b860aceb@ti.com

BackMerge v4.19-rc6 into drm-next

I have some pulls based on rc6, and I prefer to have an explicit backmerge.

Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'exynos-drm-next-for-v4.20' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-next

Add out-bridge support
- This patch series enables out-bridge for LVDS bridge device support,
  and also includes two cleanups and one relevant dt binding update
  for this.

Add Samsung 16x16 tiled format support
- This patch series adds Samsung 16x16 tiled format to scaler and
  gsc drivers. As for this, it adds Samsung specific format to
  drm_forcc.h header. For the git-pull request with relevant patches,
  I requested ack-by[1] to relevant maintainers but there was no any response.
  I'm pretty sure no problem to go to mainline though Exynos tree
  because the only user of it is Exynos.
(airlied: this looked fine to me)

[1] https://patchwork.freedesktop.org/patch/243921/

Add configurable plane alpha and pixel blend mode support
- This patch series makes mixer driver to be configuragle for
  pixel blend mode and plane alpha, which also includes one fixup
  to set all default values correctly after reset.

One cleanup
- This patch replaces drm_atomic_helper_suspend/resume() with
  drm_mode_config_helper_suspend/resume() to remove exynos specific
  suspend_state.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1538380891-24040-1-git-send-email-inki.dae@samsung.com

Merge tag 'omapdrm-4.20-2' of git://git./linux/kernel/git/tomba/linux into drm-next

omapdrm fixes and cleanups for 4.20

- fix memory barrier bug in DMM driver
- fix interrupt management in DMM driver
- partial workaround for errata i878
- fix use of freed memory
- some cleanups

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/36bdd576-2b5c-d69e-24af-05572652b08e@ti.com

Merge tag 'drm-misc-next-fixes-2018-10-03' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

- Add EXPERT config option to allow phys mem leak from fbdev for blob drivers (Neil)

Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003195957.GA64584@art_vandelay

Merge branch 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux into drm-next

Mostly code reorganizations and optimizations for vmwgfx.
- Move TTM code that's only used by vmwgfx to vmwgfx
- Break out the vmwgfx buffer- and resource validation code to a separate source file
- Get rid of a number of atomic operations during command buffer validation.

From: Thomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180928131157.2810-1-thellstrom@vmware.com

drm/fb_helper: Allow leaking fbdev smem_start

Since "drm/fb: Stop leaking physical address", the default behaviour of
the DRM fbdev emulation is to set the smem_base to 0 and pass the new
FBINFO_HIDE_SMEM_START flag.

The main reason is to avoid leaking physical addresse to user-space, and
it follows a general move over the kernel code to avoid user-space to
manipulate physical addresses and then use some other mechanisms like
dma-buf to transfer physical buffer handles over multiple subsystems.

But, a lot of devices depends on closed sources binaries to enable
OpenGL hardware acceleration that uses this smem_start value to
pass physical addresses to out-of-tree modules in order to render
into these physical adresses. These should use dma-buf buffers allocated
from the DRM display device instead and stop relying on fbdev overallocation
to gather DMA memory (some HW vendors delivers GBM and Wayland capable
binaries, but older unsupported devices won't have these new binaries
and are doomed until an Open Source solution like Lima finalizes).

Since these devices heavily depends on this kind of software and because
the smem_start population was available for years, it's a breakage to
stop leaking smem_start without any alternative solutions.

This patch adds a Kconfig depending on the EXPERT config and an unsafe
kernel module parameter tainting the kernel when enabled.

A clear comment and Kconfig help text was added to clarify why and when
this patch should be reverted, but in the meantime it's a necessary
feature to keep.

Cc: Dave Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Ben Skeggs <skeggsb@gmail.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1538136355-15383-1-git-send-email-narmstrong@baylibre.com

drm/arm/malidp: Implemented the size validation for AFBC framebuffers

AFBC buffers include additional metadata which increases the required
allocation size. Implement the appropriate size validation and sanity
checking for AFBC buffers.
Added malidp specific function for framebuffer creation. This checks
if the framebuffer has AFBC modifiers and if so, it verifies the
necessary constraints on the size, alignment, offsets and pitch.

Changes from v2:
- Replaced DRM_ERROR() with DRM_DEBUG_KMS() in
malidp_verify_afbc_framebuffer_caps() and malidp_verify_afbc_framebuffer_size()

Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

drm/arm/malidp: Validate rotations for compressed/uncompressed framebuffers for each layer

Add support for compressed framebuffers that are described using
the framebuffer's modifier field. Mali DP uses the rotation memory for
the decompressor of the format, so we need to check for space when
the modifiers are present.

Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
[re-worded commit, rebased, cleaned up duplicated checks for
 RGB888 and BGR888 and removed additional parameter for
 rotmem_required function hook]
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

drm/malidp: Enable MMU prefetch on Mali-DP650

Mali-DP650 supports warming up the SMMU translations, by sending
requsts to the SMMU before a buffer is read.

There are two modes supported:

- PARTIAL: could be enabled when the buffer is composed of 4K or 64K
  pages, the display hardware will send a configurable number of
  requests before the actual reading.

- FULL: could be enabled when the buffer is composed of 1M or 2M
  pages, the display hardware will send requests before reading for
  all pages composing the buffer.

This patch adds a mechanism for detecting the page size and set the
MMU prefetch mode if possible.

Changes since v1:
 - For imported buffers use the already populated
   drm_gem_cma_object.sgt instead of calling
   driver.gem_prime_get_sg_table, which works just for buffers
   allocated through the gem_cma API.

Signed-off-by: Jamie Fox <jamie.fox@arm.com>
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
[rebased and re-ordered functions]
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

drm/mali-dp: Implement plane alpha and pixel blend on malidp

Checks the pixel blending mode and plane alpha value when
do the plane_check. Mali DP supports blending the current plane
with the background either based on the pixel alpha blending
mode or by using the layer's alpha value, but not both at the
same time. If both case, plane_check will return failed.

Sets the HW when doing plane_update accordingly. If plane alpha
is the 0xffff, set the pixel blending bits accordingly. If not
we'd set ALPHA bit as zero and layer alpha value.

Changes since v1:
 - Introduces to use it in the malidp driver, which depends on
   the plane alpha patch
Changes since v2:
 - Refines the comments of drm/mali-dp patchset
Changes since v3:
 - Adds hardware limitation check
Changes since v4:
 - Updates on drm/malidp, hardware limitation check only when
   the format has alpha pixel.
 - Rebases on drm-misc-next.

Signed-off-by: Lowry Li <lowry.li@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

drm/malidp: Fix smart layer when doing pm_suspend/resume

Smart layer enable rectangles is set to 1 when the driver is probed,
however when doing pm_suspend the value is lost and it's not set again
making the SMART_LAYER unusable, fix that by initializing the number
of rectangles everytime we do a plane update.

Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

drm/malidp: Fix writeback in NV12

When we want to writeback to memory in NV12 format we need to program
the RGB2YUV coefficients. Currently, we don't program the coefficients
and NV12 doesn't work at all.

This patchset fixes that by programming a sane default(bt709, limited
range) as rgb2yuv coefficients.

In the long run, probably we need to think of a way for userspace to
be able to program that, but for now I think this is better than not
working at all or not advertising NV12 as a supported format for
memwrite.

Changes since v1:
 - Write the rgb2yuv coefficients only once, since we don't change
   them at all, just write them the first time NV12 is programmed,
   suggested by Brian Starkey, here [1]

[1] https://lists.freedesktop.org/archives/dri-devel/2018-August/186819.html

Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

drm: mali-dp: Call drm_crtc_vblank_reset on device init

Currently, if userspace calls drm_wait_vblank before the crtc is
activated the crtc vblank_enable hook is called, which in case of
malidp driver triggers some warninngs. This happens because on
device init we don't inform the drm core about the vblank state
by calling drm_crtc_vblank_on/off/reset which together with
drm_vblank_get have some magic that prevents calling drm_vblank_enable
when crtc is off.

Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

drm/omap: fix use of freed memory

omap_connector_destroy() does:

kfree(omap_connector);
omapdss_device_put(omap_connector->output);
omapdss_device_put(omap_connector->display);

Fix this by moving the kfree after the omapdss_device_puts.

This bug was introduced in 949ea2ef3fed4e1d0f9b80ec21ed81a9833ac248

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drm/omap: Replace drm_dev_unref with drm_dev_put

This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.

Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: Replace drm_gem_object_unreference_unlocked with put function

This patch unifies the naming of DRM functions for reference counting
of struct drm_gem_object. The resulting code is more aligned with the
rest of the Linux kernel interfaces.

Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: Replace drm_gem_object_{un/reference} with put,get functions

This patch unifies the naming of DRM functions for reference counting
of struct drm_gem_object. The resulting code is more aligned with the
rest of the Linux kernel interfaces.

Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: Substitute format_is_yuv() with format->is_yuv

drm_format_info table has a field 'is_yuv' to denote if the format
is yuv or not. The driver is expected to use this instead of
having a function for the same purpose.

Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: partial workaround for DRA7xx DMM errata i878

Errata i878 says that MPU should not be used to access RAM and DMM at
the same time. As it's not possible to prevent MPU accessing RAM, we
need to access DMM via a proxy.

This patch changes DMM driver to access DMM registers via sDMA. Instead
of doing a normal readl/writel call to read/write a register, we use
sDMA to copy 4 bytes from/to the DMM registers.

This patch provides only a partial workaround for i878, as not only DMM
register reads/writes are affected, but also accesses to the DMM mapped
buffers (framebuffers, usually).

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>

drm/omap: dmm_tiler: Fix interrupt request/free sequence during probe/remove

The interrupts should be enabled after the driver initialization to avoid
early interrupts while the driver is not yet ready to handle them.

On removal the interrupts must be disabled before other resources are
released, freed up.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: dmm_tiler: No need to check if irq is valid in omap_dmm_remove

The driver probe would fail if the irq is not available.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: fix memory barrier bug in DMM driver

A DMM timeout "timed out waiting for done" has been observed on DRA7
devices. The timeout happens rarely, and only when the system is under
heavy load.

Debugging showed that the timeout can be made to happen much more
frequently by optimizing the DMM driver, so that there's almost no code
between writing the last DMM descriptors to RAM, and writing to DMM
register which starts the DMM transaction.

The current theory is that a wmb() does not properly ensure that the
data written to RAM is observable by all the components in the system.

This DMM timeout has caused interesting (and rare) bugs as the error
handling was not functioning properly (the error handling has been fixed
in previous commits):

 * If a DMM timeout happened when a GEM buffer was being pinned for
   display on the screen, a timeout error would be shown, but the driver
   would continue programming DSS HW with broken buffer, leading to
   SYNCLOST floods and possible crashes.

 * If a DMM timeout happened when other user (say, video decoder) was
   pinning a GEM buffer, a timeout would be shown but if the user
   handled the error properly, no other issues followed.

 * If a DMM timeout happened when a GEM buffer was being released, the
   driver does not even notice the error, leading to crashes or hang
   later.

This patch adds wmb() and readl() calls after the last bit is written to
RAM, which should ensure that the execution proceeds only after the data
is actually in RAM, and thus observable by DMM.

The read-back should not be needed. Further study is required to understand
if DMM is somehow special case and read-back is ok, or if DRA7's memory
barriers do not work correctly.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>

drm/omap: remove set but not used variable 'frame_height'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/omapdrm/dss/dispc.c: In function 'dispc_ovl_setup_common':
drivers/gpu/drm/omapdrm/dss/dispc.c:2627:19: warning:
 variable 'frame_height' set but not used [-Wunused-but-set-variable]

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: Use ERR_CAST directly instead of ERR_PTR(PTR_ERR())

We prefer to use ERR_CAST to do so.
The issue is detected with the help of Coccinelle.

Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: remove unused header tcm-sita.h

tcm-sita.h is unused since commit 0d6fa53fd805 ("drm/omap: Use bitmaps for TILER placement")
Let's remove it.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/tilcdc: Convert drm_atomic_helper_suspend/resume()

convert drm_atomic_helper_suspend/resume() to use
drm_mode_config_helper_suspend/resume().

saved_state in tilcdc_drm_private will not be used
anymore, so it can be removed.

Signed-off-by: Ajit Negi <ajitn.linux@gmail.com>
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Tested-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>

drm/exynos: mixer: Make plane alpha configurable

The mixer hardware supports variable plane alpha. Currently planes are
opaque, make this configurable.

Tested on Odroid-U3 with Exynos 4412 CPU, kernel next-20180913
using modetest.

Signed-off-by: Christoph Manszewski <c.manszewski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: mixer: Make pixel blend mode configurable

The mixer hardware supports both premultiplied alpha and
non-premultiplied alpha. Currently premultiplied alpha is default, make
this configurable.

Tested on Odroid-U3 with Exynos 4412 CPU, kernel next-20180913
using modetest.

Signed-off-by: Christoph Manszewski <c.manszewski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>