Lei Yang [Wed, 19 Dec 2018 07:17:17 +0000 (15:17 +0800)]
hdmirx: add DRM RCV detection. [1/1]
PD#SWPL-3117
Problem:
Cannot get the HDR packets/
Solution:
add HDR RCV detection, Low priority than EMP.
Verify:
txlx tl1
Change-Id: I364fc942840b6eef465df16b89fd0a9fd0ccb3ff
Signed-off-by: Lei Yang <lei.yang@amlogic.com>
Jian Xu [Wed, 19 Dec 2018 03:19:51 +0000 (11:19 +0800)]
audio: auge: add HDMIRX SPDIF in support [1/2]
PD#SWPL-2956
Problem:
HDMI in DTS/Dolby input has noise when treated to LPCM
Solution:
By default,we are using PAO mode for HDMIRX,but we have not
enabled the PaPb search for 61937 raw data input, after add
that, we can detect the raw data, but it can not by clear when
switch from NONE-LPCM to NONE-LPCM, need add IRQ function to
clear that by sw.we enabled spdif in from HDMIRX, which is the same
design as txl/txlx.we can get the Pc information now.
also we add a new interface to set spdif in source when hdmirx input.
Verify:
x301
Change-Id: I3c4e8b387308ef862a069c29d15b8b5a9e865564
Signed-off-by: Jian Xu <jian.xu@amlogic.com>
Yi Zhou [Tue, 18 Dec 2018 06:56:48 +0000 (14:56 +0800)]
dv: update the hsize and vsize of dv core 2 [1/1]
PD#SWPL-3223
Problem:
get parameters from vpp blend to core 2 is error
Solution:
we get the parameters from OSD blend instead vpp blend
Verify:
u212
Change-Id: I31a5e4cf90b5d665cfd291aab5554d311ec19346
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Jian Hu [Tue, 18 Dec 2018 08:17:57 +0000 (16:17 +0800)]
clk: txl: fix gpu clock can not be changed [1/1]
PD#SWPL-2909
Problem:
The gpu clock rate can not be changed.
Solution:
1.it called meson_init_gpu function which used by txlx
in txl clock driver, change it to meson_txl_gpu_init function.
2.the /sys/kernel/debug/aml_clk/clk_test node can not work
in txl platform, Initial value for clk_numbers which needed
by clk_test driver.
Verify:
test passed on P321
Change-Id: Iade63691edf5b39325f34abb4789d48d33339329
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Lei Yang [Mon, 10 Dec 2018 10:34:06 +0000 (18:34 +0800)]
hdmirx: update the latest setting of phy. [1/1]
PD#SWPL-2803
Problem:
PHY configuration update
Solution:
1.update phy setting for low_frequency;
2.rm the useless FSM code;
3.optimize the phy configeration interfaces;
4.fix PS4 Pro flashing black&blue screen issue;
Verify:
txlx tl1
Change-Id: I0bea4fa6ec5d9284ed04845b06c3583128f3332d
Signed-off-by: Lei Yang <lei.yang@amlogic.com>
Tao Zeng [Wed, 19 Dec 2018 03:10:51 +0000 (11:10 +0800)]
mm: close vmap stack if open KASAN [1/1]
PD#SWPL-1219
Problem:
if open KASAN, kernel can't boot.
Solution:
Close vmap if open KASAN
Verify:
p212
Change-Id: I3ad4da890aca20fe59ff99dfd55592d8e9a08f3c
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
yicheng shen [Thu, 13 Dec 2018 09:12:07 +0000 (04:12 -0500)]
hdmirx: fix dvi issue when resume [1/1]
PD#SWPL-2641
Problem:
SDA of I2C was pulled down,the box cant read EDID and then send DVI.
Solution:
Add rxsense pulse to avoid mtk box sda low issue.
Verify:
Local
Change-Id: I0d3dc4b0c3b956663be1d3e383094e456f3d4e7d
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>
Sandy Luo [Mon, 17 Dec 2018 08:12:04 +0000 (16:12 +0800)]
dts: tl: add tuner support [1/1]
PD#OP-6
Problem:
Tuner cann't work on tl1 socket board
Solution:
add tuner in dts
Verify:
test pass on tl1 socket board
Change-Id: I49d70c3ab3c3747000faf40cd06bdb368231311e
Signed-off-by: Sandy Luo <sandy.luo@amlogic.com>
Evoke Zhang [Tue, 11 Dec 2018 10:23:31 +0000 (18:23 +0800)]
arm: dts: x301 & t309: enable panel unifykey support for tvconfig [1/1]
PD#SWPL-2761
Problem:
not support tvconfig yet
Solution:
1.enable key_valid in panel dtsi
2.enable fr_auto_policy in panel dtsi
3.enable clk ss for lvds and vbyone in panel dtsi
4.also fix some coverity errors
Verify:
x301
Change-Id: I00dd5ff621cfbc3f100bbe6045a35c8f917ade29
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Blance Tang [Tue, 18 Dec 2018 02:42:43 +0000 (10:42 +0800)]
buildroot: Enable ddr_window tool [1/1]
PD#SWPL-3340
Problem:
DDR Window tool is no longer generated as a separate KO after DDR TOOL
configuration setting changed CL:41064
Solution:
Change DDR Window Tool configuration to tristate which can support
standalone KO
Enable DDR_TOOL in SmartHome default config
Verify:
Local
Change-Id: I15370cabe428a5103c1fe9b345a085822c056932
Signed-off-by: Blance Tang <guofeng.tang@amlogic.com>
Jian Cao [Mon, 17 Dec 2018 06:19:16 +0000 (14:19 +0800)]
osd: need information whether current OSD is blanked or not [1/1]
PD#SWPL-3254
Problem:
need information whether current OSD is blanked or not
Solution:
add sysfs node osd_status
Verify:
verified on u212
Change-Id: Ie73417f08c648a750a881af375800aae57a48762
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
Rui Wang [Thu, 13 Dec 2018 11:52:47 +0000 (19:52 +0800)]
video: add freeze video function [1/1]
PD#SWPL-3154
Problem:
Implement video freeze
Solution:
Add freeze video function
Verify:
Test pass by r311
Change-Id: I6a3839d26ea99ead7097f20c283afe9b8103a668
Signed-off-by: Rui Wang <rui.wang@amlogic.com>
tao zeng [Wed, 14 Nov 2018 02:29:45 +0000 (10:29 +0800)]
mm: save wasted memory by slab [1/1]
PD#SWPL-1767
Problem:
When driver/kernel call kmalloc with large size, memory may waste
if size is not equal to 2^n. For example, driver call kmalloc with
size 129KB, kmalloc will allocate a 256KB memory block to caller.
Then 127kb memory will be wasted if this caller don't free it.
Solution:
Free tail of slab memory if size is not match to 2^n. This change
can save about 900KB memory after boot, and more than 100KB during
run time.
Verify:
P212
Change-Id: Iba378792ec30003358b64384361c0f0c4c2800d8
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
Zhuo Wang [Fri, 7 Dec 2018 10:13:56 +0000 (18:13 +0800)]
ethernet: resume/suspend NULL pointer [1/1]
PD#SWPL-3000
Problem:
repeat resume/suspend will NULL pointer
Solution:
use globle var
Verify:
verify in u200
Change-Id: If44e52a5907c85fb181a450af92b18fe37e09d4f
Signed-off-by: Zhuo Wang <zhuo.wang@amlogic.com>
huaihao guo [Tue, 11 Dec 2018 13:07:12 +0000 (21:07 +0800)]
deinterlace: Add AFBC support on TL1 [1/1]
PD#SWPL-3113
Problem:
Add AFBC support on TL1
Solution:
Add AFBC support on TL1
Verify:
T962x2-x301
Change-Id: Ib4f40f6ca0cbb1553bf4f76848d1649822dda3e8
Signed-off-by: huaihao.guo <huaihao.guo@amlogic.com>
Cheng Tong [Tue, 11 Dec 2018 09:21:06 +0000 (17:21 +0800)]
dts: add LiveTv support [2/2]
PD#SWPL-3105
Problem:
dts didn't have dvb config
Solution:
add dvb dts config
defalut commented out as reference
Verify:
Verify by Android P franklin
Change-Id: I47ab10c22b32f6bfd51a0c113a692f0c5863178b
Signed-off-by: Cheng Tong <cheng.tong@amlogic.com>
tao zeng [Thu, 29 Nov 2018 01:55:14 +0000 (09:55 +0800)]
ddr_bandwidth: support multi-ports config for one channel [1/1]
PD#172256
Problem:
ddr bandwidth prot config can only set 1 port for 1 channel. But
dmc controller support measure many ports on 1 channel.
Solution:
Using bit mask to support multi-ports config for one channel.
Verify:
P212
Change-Id: Iad79e6ebd6aeb74b0e31b3f1bee08de4fd557cc1
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
Evoke Zhang [Wed, 12 Dec 2018 08:33:29 +0000 (16:33 +0800)]
lcd: update p2p config and pll setting for tl1 [1/1]
PD#SWPL-3108
Problem:
1. tcon pll don't support spread spectrum yet
2. no p2p parameters config
Solution:
1. add p2p config parameters
2. enable tl1 clk parameters auto generate
3. add tl1 tcon_pll spread spectrum support
4. update clk spread spectrum api:
set ss_level(hex val):
echo level <val> >/sys/class/lcd/ss
set ss_freq(hex val):
echo freq <val> >/sys/class/lcd/ss
set ss_mode(hex val):
echo mode <val> >/sys/class/lcd/ss
set ss advance(hex val, [15:12]=mode, [11:8]=freq, [7:0]=level):
echo <val> >/sys/class/lcd/ss
show ss_level, ss_freq, ss_mode:
cat /sys/class/lcd/ss
Verify:
x301
Change-Id: I99eeca84290403fe766b17673ba9b0f7429fae26
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Bencheng Jing [Sat, 15 Dec 2018 10:03:20 +0000 (18:03 +0800)]
amvecm: fix platform boot failed [1/1]
PD#SWPL-3276
Problem:
platform boot failed except TL1
Solution:
protect LC register read and Write
Verify:
R311&P321
Change-Id: I9b93a1c28cdef43db8f1c5ad46bd6597bc62a1bc
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
Jian Xu [Thu, 13 Dec 2018 14:57:23 +0000 (22:57 +0800)]
audio: dts: config tdmb/spdif continuous clk to fix spdif no clk issue [1/1]
PD#SWPL-2491
Problem:
HDMI output no sound when system boot up
Solution:
When system bootup,there is no sound,Checked the issue, pcm_write always fail,
cat /d/aml_clkmsr/clkmsr ,[120][ 6000000]audio_spdifout_mst_clk.
the spdif has no clock.Seems after enable same source, the spdifa clock
is not configured correctly. now configure that to continous clock.
TBD, need check the root cause in alsa kernel code.
Verify:
verify by galilei, reboot 20 times.
Change-Id: I0c50c71d2436894d63b83d4040a77a8a9aa6977c
Signed-off-by: Jian Xu <jian.xu@amlogic.com>
Bencheng Jing [Mon, 10 Dec 2018 09:07:06 +0000 (17:07 +0800)]
amvecm: add local contrast iir SW algorithm [1/1]
PD#SWPL-2587
Problem:
local contrast SW algorithm
Solution:
add local contrast SW iir algorithm support
Verify:
x301
Change-Id: I8c80ce3fa5252585d5dd4a15e72beb9c0bfd5d7f
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
Qiufang Dai [Fri, 14 Dec 2018 09:19:28 +0000 (17:19 +0800)]
suspend: remote: do not do suspend action under freeze mode [1/1]
PD#SWPL-2399
Problem:
Miss IR (power) key value when wakeup from freeze.
Solution:
Do not suspend/resume IR device under freeze mode
Verify:
x301_tl1
Change-Id: I7bdf0b847fa1a8b96bb2896426e15faf8143e820
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
zhiqiang liang [Thu, 13 Dec 2018 08:53:27 +0000 (16:53 +0800)]
suspend: power: plug off the secondary cpus for freeze mode [1/1]
PD#SWPL-2399
Problem:
freeze mode can not kill the secondary cpus
Solution:
move the cpu kill function before the freeze function
Verify:
tl1 test success
Change-Id: I1da7cb8bcd800b8372fd152490eadd4ef3866ece
Signed-off-by: zhiqiang liang <zhiqiang.liang@amlogic.com>
Xuhua Zhang [Thu, 13 Dec 2018 08:41:49 +0000 (16:41 +0800)]
tvin: vdin: vdin add afbce write back to memory interface [1/1]
PD#SWPL-3200
Problem:
vdin add afbce need more debug method.
Solution:
vdin add read_pic_afbce debug interface
Verify:
TL1 X301
Change-Id: I45a741ba20409dc25b41ce316b0df0dce9d2dc28
Signed-off-by: Xuhua Zhang <xuhua.zhang@amlogic.com>
Xuhua Zhang [Thu, 29 Nov 2018 06:28:43 +0000 (14:28 +0800)]
tvin: vdin: fix vdin CMA layout adaptation [1/1]
PD#SWPL-2526
Problem:
1.CMA layout adaptation cause crash
2.vdin buff dump error
3.read_pic error
Solution:
1.codec mm has be moved to high memory area,
we should map memory use vmap.
2.make vdin high mem and low mem to be compatible
when we dump vdin buff.
3.fix read_pic bug.
Verify:
TXLX R311
Change-Id: I90e4f46ba91d38c6ce0f8bfd65b5c22e6be3b83f
Signed-off-by: Xuhua Zhang <xuhua.zhang@amlogic.com>
Xuhua Zhang [Thu, 13 Dec 2018 09:16:31 +0000 (17:16 +0800)]
tvin: vdin: vdin afbce fix header size bug [1/1]
PD#SWPL-3208
Problem:
vdin afbce scaler, display abnormal.
Solution:
fix afbce header size problem.
Verify:
TL1 X301
Change-Id: I461b4aa809ceddbe18cf7f6f49e8152b43b86076
Signed-off-by: Xuhua Zhang <xuhua.zhang@amlogic.com>
Brian Zhu [Wed, 12 Dec 2018 15:39:15 +0000 (23:39 +0800)]
tb_detect: add external canvas config when multi-dec source [1/1]
PD#IPTV-52
Problem:
vframe from multi-dec has no canvas index
Solution:
use external canvas index for vframe from multi-dec
Verify:
verified by u211
Change-Id: I767f86e492cddb9cc054c048de7078d2f6b85d33
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Shunzhou Jiang [Tue, 27 Nov 2018 02:15:00 +0000 (10:15 +0800)]
clk: tl1: fix sys_pll overflow in 32bit system. [1/1]
PD#SWPL-2830
Problem:
sys_pll value overflow
Solution:
round pll div 1000
Verify:
TL1 SKT
Change-Id: Ia707be9aa6d22366b6da032739b8432602d21698
Signed-off-by: Shunzhou Jiang <shunzhou.jiang@amlogic.com>
Evoke Zhang [Wed, 12 Dec 2018 04:42:22 +0000 (12:42 +0800)]
arm: dts: t309: enable tcon od memory support [1/1]
PD#SWPL-3130
Problem:
t309 don't support tcon od default
Solution:
add tcon od memory support
Verify:
t309
Change-Id: I0aeaed65dfe9ca138c7f3035d5d505598e10c1d6
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
yicheng shen [Thu, 13 Dec 2018 06:28:35 +0000 (01:28 -0500)]
hdmirx: fix hdcp2.2 cant work after resume issue [1/1]
PD#SWPL-3187
Problem:
hdcp2.2 cant work after resume
Solution:
Update ESM hard reset handle
Verify:
Local
Change-Id: If8e94db2c2882896b547410537652056bc902f47
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>
Kaifu Hu [Fri, 30 Nov 2018 08:00:08 +0000 (16:00 +0800)]
hdmitx: default set frac_rate_policy to 1 [1/1]
PD#SWPL-1955
Problem:
The /sys/class/amhdmitx/amhdmitx0/frac_rate_policy is 0 when
uboot not contain frac_rate_policy
Solution:
Default set frac_rate_policy to 1
Verify:
T962e/R321
Change-Id: Ifff2dbaeef0a3012a730d14405963d994f3eeed3
Signed-off-by: Kaifu Hu <kaifu.hu@amlogic.com>
Bichao Zheng [Tue, 11 Dec 2018 02:59:09 +0000 (10:59 +0800)]
gpio-led: g12b: add system led control for w400 [2/2]
PD#SWPL-3008
Problem:
g12b_w400 need add led control
Solution:
Add system led control for w400
Verify:
g12b_w400
Change-Id: I7b27af95c92f06bb0ca89e00aeccc65f398dad70
Signed-off-by: Bichao Zheng <bichao.zheng@amlogic.com>
Yonghao Jiao [Wed, 12 Dec 2018 15:03:03 +0000 (23:03 +0800)]
audio: add tas5805 [1/1]
PD#SWPL-3081
Problem:
compatiable tas5805 module
Solution:
add tas5805 drivers
Verify:
T962X2
Change-Id: I3608e47fe768af0f924751a8bcc103389d0811de
Signed-off-by: Yonghao Jiao <yonghao.jiao@amlogic.com>
Zhongfu Luo [Thu, 13 Dec 2018 09:06:23 +0000 (17:06 +0800)]
dts: GXL: defendkey: modify reserve memory mode [2/2]
PD#SWPL-2100
Problem:
GXL need to modify reserve memory mode
Solution:
remove defendkey reserved memory in GXL dts
Verify:
GXL skt board verify pass
Change-Id: Ie5ed01c6dd8f88c5594d6bc73f13282e535071a2
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
Zhiwei Yuan [Wed, 12 Dec 2018 12:48:20 +0000 (20:48 +0800)]
dtv_demod: "No signal" is seen when video is playing [1/1]
PD#SWPL-3019
Problem:
Unplug the DTV signal, then do AC off then on, enter DTV source, plug the DTV signal, then change channel, the current channel will display abnormally, the video will display with "no signal" together
Solution:
sync the signal status(using read sts interface) with tuning result
Verify:
verified by T962-P321-DDR4
Change-Id: I3ba01dc976c40391f3f305a3754632d2cccfd571
Signed-off-by: Zhiwei Yuan <zhiwei.yuan@amlogic.com>
MingLiang Dong [Tue, 11 Dec 2018 09:16:24 +0000 (04:16 -0500)]
amvecm: add color primary get ioctrl [1/1]
PD#TV-1463
Problem:
new interface
Solution:
add color primary get ioctrl
Verify:
verify on TL1
Change-Id: I0d4880b6a224be153e80b3eeb11bb5a0352f9ed5
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
Shuyu Li [Wed, 12 Dec 2018 08:25:47 +0000 (16:25 +0800)]
audio: auge: The recorded data L/R channel has 7.5 degree phase diff [1/1]
PD#SWPL-3145
Problem:
The L/R channel has 7.5 degree phase diff
Solution:
Change reg_tdmin_in_rev_ws of EE_AUDIO_TDMIN_X_CTRL 1->0
Verify:
Verify by T962x2_X301 board
Change-Id: I6ca624db10ff96481dd7f413d9f184aeee8c95b3
Signed-off-by: Shuyu Li <shuyu.li@amlogic.com>
Zhiwei Yuan [Wed, 12 Dec 2018 07:10:14 +0000 (15:10 +0800)]
dtv_demod: TL1,dtmb,change frequency,show "no signal" at first [1/1]
PD#SWPL-3025
Problem:
Different frequency channel switch, the channel first pops up "no signal" and then displays the channel
Solution:
do dtmb sw reset before re-tune
Verify:
verified by t962x2_x301
Change-Id: Ibc14de37f2f3f6b07af4d125e9fb58dd308e61c4
Signed-off-by: Zhiwei Yuan <zhiwei.yuan@amlogic.com>
Zhongfu Luo [Fri, 7 Dec 2018 12:14:50 +0000 (20:14 +0800)]
dts: G12B: defendkey: support secure upgrade check [3/3]
PD#SWPL-2348
Problem:
G12B need to support secure upgrade check
Solution:
add defendkey support in all G12B dts
Verify:
G12B skt board verify pass
Change-Id: I2c3f51e761531cf2169dda483991b3d876039686
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
MingLiang Dong [Tue, 11 Dec 2018 10:37:04 +0000 (05:37 -0500)]
hdr: Enable default output to HDR for HDR TV [1/1]
PD#SWPL-3096
Problem:
G12A/G12B need enable sdr2hdr
Solution:
enable sdr2hdr function
Verify:
verify on G12A
Change-Id: I1e771a13d33fe675cfc36d8308afc37077545cd4
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
Chao Liu [Thu, 13 Dec 2018 06:19:31 +0000 (14:19 +0800)]
dts: add the attestationkeybox of unifykey for dts files missing this node [1/1]
PD#SWPL-3189
Problem:
some boards can't write attestationkeybox.
Solution:
add the attestion node.
Verify:
txl_t962_p321_720p
Change-Id: Ic57fb00a4174f2d3d67bd8861710b6d9a560eaa2
Signed-off-by: Chao Liu <chao.liu@amlogic.com>
Zongdong Jiao [Thu, 13 Dec 2018 05:31:27 +0000 (13:31 +0800)]
hdmitx: fix a resmue panic isse [1/1]
PD#SWPL-3188
Problem:
When HDMI cable is not connected(that is CVBS out), and system
may be panic after resume.
Solution:
Add NULL pointer protection check
Verify:
P212
Change-Id: I60818faaf7049667501e31990fa557b754ea7f1b
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Pengguang Zhu [Fri, 12 Oct 2018 11:46:00 +0000 (19:46 +0800)]
board: get ao_register_base from dts [1/1]
PD#SWPL-3203
Problem:
android P can not boot up on G12A with 32bit kernel
Solution:
get register base from dts
Verify:
Local
Change-Id: Ifb3163a867c1c8ed4f8c344d064cead216334773
Signed-off-by: Pengguang Zhu <pengguang.zhu@amlogic.com>
keke.li [Tue, 27 Nov 2018 05:54:21 +0000 (13:54 +0800)]
gdc: add a convert function to map dma address [1/1]
PD#SWPL-2157
Problem:
gdc module need to get dma address directly
Solution:
add a convert function to map dma address
Verify:
g12b
Change-Id: I1d40350e4727335d1f69f38caafb1dfe7b0db842
Signed-off-by: Keke Li <keke.li@amlogic.com>
Zhongfu Luo [Fri, 7 Dec 2018 10:14:38 +0000 (18:14 +0800)]
dts: TXLX: defendkey: support secure upgrade check [3/3]
PD#SWPL-2344
Problem:
TXLX need to support secure upgrade check
Solution:
add defendkey support in all TXLX dts
Verify:
TXLX skt board verify pass
Change-Id: Ice348161f0a01698bc40e9fb291d1020f478b1fa
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
Tao Zeng [Wed, 12 Dec 2018 06:37:26 +0000 (14:37 +0800)]
mm: fix suspend crash on u200 [1/1]
PD#SWPL-1219
Problem:
When open vmap stack, suspend will fail on U200. If open cpu idle,
resume from idle will fail too.
Solution:
set up vmap stack early before open IRQ. If set up this stack late
than IRQ open, stack will point to a ramdom address
Verify:
u200
Change-Id: Ie60f6faadf9afece47ccc887a0af46814f070897
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
Yingyuan Zhu [Tue, 11 Dec 2018 08:37:32 +0000 (16:37 +0800)]
watchdog: Change the feed watchdog mode [1/1]
PD#SWPL-2378
Problem:
Using Android to feed watchdog is not easy to debug the
crash problem, in addition, the Android does not open
the dog feeding service.
Solution:
Change the DTS configuration and change into driver feed watchdog.
Verify:
test pass on g12a-u200
Change-Id: Ie0a91fd8451fdccf3038ba6290a277c9048c52cd
Signed-off-by: Yingyuan Zhu <yingyuan.zhu@amlogic.com>
Jiamin Ma [Wed, 12 Dec 2018 09:37:01 +0000 (17:37 +0800)]
debug: show pfn info when undefined instr happens at user space [1/1]
PD#SWPL-3076
Problem:
Lack of debug infos when undefined instr happens at user space
Solution:
Call show_all_pfn when undefined instr happens at user space
Verify:
Locally on ampere
Change-Id: Id24e797c2781c94c507ad07ec17a3d4ae7d44cd9
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
nengwen.chen [Mon, 10 Dec 2018 12:06:41 +0000 (20:06 +0800)]
atv_demod: reduce atv demod debug info when searching. [1/1]
PD#SWPL-2712
Problem:
reduce atv demod debug info when searching.
Solution:
reduce atv demod debug info when searching.
Verify:
verified by r311
Change-Id: I01f1cebabdacdea4bb7695c2133b99157d8db19d
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Sandy Luo [Wed, 12 Dec 2018 09:08:31 +0000 (17:08 +0800)]
dts: sync difference between arch32 and arch64 [1/1]
PD#SWPL-959
Problem:
sync arch32 and arch64 dts.
Solution:
sync arch32 and arch64 dts.
Verify:
r311
Change-Id: Id411e7dddad0491b16149fe33847e9e282d81a97
Signed-off-by: Sandy Luo <sandy.luo@amlogic.com>
Shuyu Li [Mon, 10 Dec 2018 08:47:24 +0000 (16:47 +0800)]
audio: codec: the DAC gain set of acodec not work [1/1]
PD#SWPL-3134
Problem:
the DAC gain set is not work
Solution:
update and aml_codec_tl1_acodec.c, change the method of
getting codec pointer from kcontrol pointer.
Verify:
verify by T962x2_X301 board
Change-Id: I02f02b73fab3b8391ef4866a71ffaf0d48bbbbbf
Signed-off-by: Shuyu Li <shuyu.li@amlogic.com>
Huan Biao [Wed, 12 Dec 2018 07:33:23 +0000 (15:33 +0800)]
arm: dts: tl1: optimize ipa parameter [1/1]
PD#SWPL-3140
Problem:
tl1 ipa coeff and power data no match test data
Solution:
tl1 ipa coeff and power data update for match chip test data
Verify:
tl1 x301 pass
Change-Id: Idcf1cf7c317e0b3ebb0becb057b4c8fa35e64a62
Signed-off-by: Huan Biao <huan.biao@amlogic.com>
liangzhuo.xie [Fri, 23 Nov 2018 02:36:11 +0000 (10:36 +0800)]
dts: add video11 and video12 for screenrecord [2/6]
PD#SWPL-209
Problem:
add screenrecord function
Solution:
add video11 and video12 for screenrecord
Verify:
verify by t962_p321
Change-Id: I0d33d9d01704b6fe6e5c7dbeccb1fb2be68904b3
Signed-off-by: liangzhuo.xie <liangzhuo.xie@amlogic.com>
nengwen.chen [Mon, 12 Nov 2018 12:44:35 +0000 (20:44 +0800)]
dtv_demod: DTV search menu does not have ISDB-T entry [4/6]
PD#SWPL-1664
Problem:
DTV search menu does not have ISDB-T entry
Solution:
add ISDB-T system support.
Verify:
verified by einstein
Change-Id: Ie0bdc988d53256487e24c3123320b50f2a58cdf3
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Jian Xu [Tue, 11 Dec 2018 06:48:14 +0000 (14:48 +0800)]
audio: codecs: fix TL1 reference board volume too small [2/2]
PD#SWPL-2652
Problem:
X301/T309 AMP volume configured to small
Solution:
change the default external AMP codec mixer name to a match
the ini parsing function in audio hal.
TODO: need dynamically check the different codec mixer name
in ini file.
Verify:
verify by x301
Change-Id: Iba835d37ea02bec3095556d54fbf327bd6390904
Signed-off-by: Jian Xu <jian.xu@amlogic.com>
he.he [Tue, 20 Nov 2018 05:57:37 +0000 (13:57 +0800)]
usb: adb panic [1/1]
PD#SWPL-2678
Problem:
adb panic in release_ffs_buffer
Solution:
1.when kzalloc data_ep use GFP_ATOMIC instead of GFP_KERNEL
and keep spin lock protection.
2.check buffer_temp->data_ep == NULL, return
Test: adb push
Verify:
verified by he he
Change-Id: I3402b17d62b8a0ef4e3185a87729a0c3e87449e9
Signed-off-by: he.he <he.he@amlogic.com>
Bencheng Jing [Thu, 6 Dec 2018 08:53:17 +0000 (16:53 +0800)]
pq: fix sr registers load fail on txl [1/1]
PD#SWPL-2941
Problem:
sr top ctrl is closed when video off
Solution:
txl and txl sr top don't close
Verify:
TxL
Change-Id: Ia8e7e3bd93dd328497af66cf9758e3021cafe22c
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
Evoke Zhang [Fri, 23 Nov 2018 05:10:06 +0000 (13:10 +0800)]
lcd: add od support for tl1 tcon [1/1]
PD#SWPL-2759
Problem:
need over-driver function for tl1 tcon
Solution:
add tcon cma memory and od setting support
Verify:
x301
Change-Id: I926d221fef3317be8b3879a35298035ac9babcce
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Wenfeng Guo [Fri, 7 Dec 2018 08:12:00 +0000 (16:12 +0800)]
deinterlace: open pulldown_enable debug node [1/1]
PD#SWPL-3003
Problem:
pulldown_enable constraintd by DEBUG_SUPPORT
Solution:
open pulldown_enable debug node
Verify:
TL1
Change-Id: Ib0a39a718f5e0f171bf9c1d850912bf4afa6a9d5
Signed-off-by: Wenfeng Guo <wenfeng.guo@amlogic.com>
Evoke Zhang [Wed, 31 Oct 2018 05:52:37 +0000 (13:52 +0800)]
backlight: ldim: add fault reset handle for iw7027 [1/1]
PD#SWPL-1161
Problem:
sometims iw7027 work failure, need reset to recovery
Solution:
add reset handler triggered by fault pin
Verify:
txlx r311
Change-Id: I9c65f0b982ac5e52ff9bd5e43f9df516df2af184
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Evoke Zhang [Mon, 10 Dec 2018 06:08:48 +0000 (14:08 +0800)]
vpp: update ofifo vs_pol config for tl1 [1/1]
PD#SWPL-3049
Problem:
vpp ofifo positive vs_pol can't fit all the display situation
Solution:
change vpp ofifo vs_pol to negative
Verify:
x301
Change-Id: I539c3514c0f3638a9d90c9c4a71a6c9863dac79a
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
tao zeng [Wed, 7 Nov 2018 08:51:50 +0000 (16:51 +0800)]
mm: optimize stack usage for functions [1/1]
PD#SWPL-1773
Problem:
After adding optimization of vmap stack, we can found stack usage
of each functions when handle vmap fault. From test log we see some
functions using large stack size which over 256bytes. Especially
common call path from fs. We need to optimize stack usage of these
functions to reduce stack fault probability and save stack memory
usage.
Solution:
1. remove CONFIG_CC_STACKPROTECTOR_STRONG and set STACKPROTECTOR to
NONE. This can save stack usage add by compiler for most functions.
Kernel code size can also save over 1MB.
2. Add some noinline functions for android_fs_data rw trace calls. In
these trace call it allcated a 256 bytes local buffer.
3. Add a wrap function for mem abort handler. By default, it defined a
siginfo struct(size over 100 bytes) in local but only used when fault
can't be handled.
4. reduce cached page size for vmap stack since probability of page
fault caused by stack overflow is reduced after function stack usage
optimized.
Monkey test show real stack usage ratio compared with 1st vmap
implementation reduced from 35% ~ 38% to 26 ~ 27%. Which is very
close to 25%, theory limit.
Verify:
P212
Change-Id: I5505cacc1cab51f88654052902852fd648b6a036
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
Jihong Sui [Fri, 7 Dec 2018 02:40:26 +0000 (10:40 +0800)]
deinterlace: pq: adjust cue setting for tl1 [1/1]
PD#SWPL-2984
Problem:
VLSI(yanling.liu) fine-tune cue setting for TL1.
Solution:
add new setting.
Verify:
tl1
Change-Id: I99c32d994687650dc851dd2fb8c0464e8ffd21b5
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Pengcheng Chen [Tue, 11 Dec 2018 09:23:43 +0000 (17:23 +0800)]
osd: remove phys_to_vir to prevent crash on the 32bit & 2G boadr [1/1]
PD#SWPL-3079
Problem:
phys_to_vir in height mem rw caused crashed.
Solution:
remove phys_to_vir(dd funs not work)
Verify:
tl1
Change-Id: Ic9679471a51974cabf84b61efe90c88e845d01ea
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Hongmin Hua [Tue, 11 Dec 2018 06:03:04 +0000 (14:03 +0800)]
cec: add the port map for connect status [1/1]
PD#SWPL-3010
Problem:
the arc can't work
Solution:
add the port map for connect status
Verify:
verified on darwin
Change-Id: I9f886c35de8670acdc431185bb26aa1836a8c150
Signed-off-by: Hongmin Hua <hongmin.hua@amlogic.com>
Yi Zeng [Mon, 10 Dec 2018 07:57:18 +0000 (15:57 +0800)]
nand: fix the free-node leak in rsv manager [1/1]
PD#SWPL-2776
Problem:
did not release the free node of rsv information
Solution:
release free node and set bit mask in right way
Verify:
S400
Change-Id: I781f2374b91ca1e7cd1a66e75fc554318737c377
Signed-off-by: Yi Zeng <yi.zeng@amlogic.com>
Ruixuan Li [Mon, 3 Dec 2018 07:21:30 +0000 (15:21 +0800)]
emmc: modify device node name [1/1]
PD#SWPL-2719
Problem:
Can't idetify correctlly when move disk have multi
partition
Solution:
Remove the function of using the partition name as
the device node name
Verify:
test pass on tl1 ref board
Change-Id: I113e63f209c529149fb94b0bb10b0b254717c2bf
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
Jian Cao [Fri, 7 Dec 2018 09:46:36 +0000 (17:46 +0800)]
video: fix picdec coverity error [1/1]
PD#SWPL-2797
Problem:
fix picdec coverity error
Solution:
solve picdec coverity issues
Verify:
verified on P212
Change-Id: Iee0a7beb3fbf8382e9dd4207075df85171ed62ae
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
Jian Cao [Thu, 6 Dec 2018 14:56:27 +0000 (22:56 +0800)]
video: fix ppmgr coverity error [1/1]
PD#SWPL-2797
Problem:
fix ppmgr coverity error
Solution:
solve ppmgr coverity issues
Verify:
verified on P212
Change-Id: I05b837073ec9c981004320afaa0680648198d5b3
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
Jian Cao [Fri, 7 Dec 2018 09:52:12 +0000 (17:52 +0800)]
osd: fix ge2d coverity error [1/1]
PD#SWPL-2798
Problem:
fix ge2d coverity error
Solution:
add return val timeout for waiting completion
Verify:
verified on P212
Change-Id: Iaacf3f5b30721eb5d72d3c355f0404f4848969b5
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
Jian Cao [Thu, 6 Dec 2018 08:07:41 +0000 (16:07 +0800)]
osd: fix osd coverity error [1/1]
PD#SWPL-2798
Problem:
fix osd coverity error
Solution:
solve osd coverity issues
Verify:
verified on P212
Change-Id: I9714e3b229786d39ffa5a150633d59082bdf3549
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
Dezhi Kong [Mon, 12 Nov 2018 10:00:29 +0000 (18:00 +0800)]
vdin: optimize game mode process [1/1]
PD#SWPL-2145
Problem:
HDMI Rx Video path display latency of Game mode and Normal mode
Solution:
optimize game mode
Verify:
T962X-R311
Change-Id: Ib0a41915dfb088495c976d56ab812f90e31602f4
Signed-off-by: Dezhi Kong <dezhi.kong@amlogic.com>
Chuangcheng Peng [Fri, 7 Dec 2018 10:16:13 +0000 (18:16 +0800)]
dvb-core: compatile with 32bit in 64bit kernel [1/1]
PD#SWPL-3009
Problem:
32bit frontend app can't call ioctl in 64bit-kernel
Solution:
Add 32bit define in header and handle in dvb_frontend in 64bit-kernel
Verify:
Verify at android_p at R311
Change-Id: I63178803cfb1cf7d670e3c2b55f104e97f5afa63
Signed-off-by: Chuangcheng Peng <chuangcheng.peng@amlogic.com>
Zhiwei Yuan [Thu, 29 Nov 2018 07:20:43 +0000 (15:20 +0800)]
dtv_demod: TL1 timeshift display have a lot mosaic [1/1]
PD#SWPL-2618
Problem:
TL1 timeshift display have a lot mosaic
Solution:
tune ts clk to a smaller value
Verify:
verified by t962x2_x301
Change-Id: I89c8cdb3317e42101fc8f161436d33ccd0761945
Signed-off-by: Zhiwei Yuan <zhiwei.yuan@amlogic.com>
Zhongfu Luo [Fri, 7 Dec 2018 09:36:14 +0000 (17:36 +0800)]
dts: G12A: defendkey: support secure upgrade check [4/4]
PD#SWPL-2347
Problem:
G12A need to support secure upgrade check
Solution:
add defendkey support in all G12A dts
Verify:
G12A skt board verify pass
Change-Id: I7343c2c553dfe776eefcfff9ab3a270c87014118
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
Tao Zeng [Mon, 10 Dec 2018 02:21:09 +0000 (10:21 +0800)]
ddr: add bandwidth measure support for TL1 [1/1]
PD#SWPL-2980
Problem:
ddr bandwidth measure is not enabled on TL1
Solution:
Add port config and dtsi for TL1
Verify:
t962x2_x301
Change-Id: I1fa932a179586f48e3698c53975b64b204a83731
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
tao zeng [Tue, 20 Nov 2018 04:14:57 +0000 (12:14 +0800)]
mm: check phys_to_xxxx macro on 32bit OS [1/1]
PD#SWPL-1909
Problem:
If physical address of a memory location is not in linear mapping
range, then any caller with phys_to_xxxx to get a pointer will
cause bug.
Solution:
Check input address range for phys_to_xxxx to get a BUG output.
This change is used for debug
Verify:
P212
Change-Id: I13bcaa3983e2d730b8d2bc03cd28c62585f49969
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
Zhongfu Luo [Fri, 7 Dec 2018 09:26:52 +0000 (17:26 +0800)]
defendkey: G12A: support secure upgrade check [3/4]
PD#SWPL-2347
Problem:
G12A need to support secure upgrade check
Solution:
1.modify reserve memory mode
2.only use cpu0 in defendkey write process
Verify:
G12A skt board verify pass
Change-Id: Iad771381e959a79dcba7a0adb862295fa5ba5dee
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
Evoke Zhang [Fri, 7 Dec 2018 03:27:24 +0000 (11:27 +0800)]
lcd: update tcon_pll lock setting for tl1 [1/1]
PD#SWPL-2983
Problem:
tcon_pll lock is affected by VDDEE voltage
Solution:
change tcon_pll lock setting to avoid VDDEE effection
Verify:
x301
Change-Id: I2f9d4638274fe3acdf5d8954b3670e7c108782e1
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Tao Guo [Sun, 4 Nov 2018 03:22:49 +0000 (03:22 +0000)]
media: add get free handle cmd [4/9]
PD#SWPL-1081
Problem:
Need get freed handle for DRM frame mode
Solution:
Add ioctl cmd to get freed handle
Verify:
P212
Change-Id: Ic0ce64061e334fdea5580d9f92b3e0b58caa88eb
Signed-off-by: Tao Guo <tao.guo@amlogic.com>
qiu.zeng [Fri, 7 Dec 2018 02:49:08 +0000 (10:49 +0800)]
BT: resolve bt remote re-connected fail [1/1]
PD#SWPL-2735
Problem:
bt remote re-connected fail
Solution:
control bluetooth opwer up
Verify:
Verifying on Public Edition r311
Change-Id: I8c74442894f606d5afd992e52d6c80bada0aed9f
Signed-off-by: Qiu Zeng <qiu.zeng@amlogic.com>
Brian Zhu [Fri, 7 Dec 2018 06:21:43 +0000 (14:21 +0800)]
video: sr: add the missing bit mask for sr core1 [1/1]
PD#SWPL-2948
Problem:
Miss the sr core1 bit mask to cause display abnormal
Solution:
Add the bit mask for sr core1
Verify:
Test pass by x301
Change-Id: I742d86b610a9748adad7c143d7a85c6796d3c8f7
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Tao Zeng [Thu, 6 Dec 2018 07:24:44 +0000 (15:24 +0800)]
mm: subtract CMA isolated pages when allocate TVP [1/1]
PD#SWPL-2933
Problem:
When allocate CMA pages in buildroot enverioment, system will
hung in congestion_wait:
Call trace:
[<
ffffff8009086a78>] __switch_to+0xa0/0xc8
[<
ffffff8009de3eb8>] __schedule+0x268/0x7d8
[<
ffffff8009de4464>] schedule+0x3c/0xa0
[<
ffffff8009de7c9c>] schedule_timeout+0x1b4/0x448
[<
ffffff8009de3be8>] io_schedule_timeout+0x98/0x100
[<
ffffff80091e3fb8>] congestion_wait+0x90/0x190
[<
ffffff80091ebcf4>] isolate_migratepages_block+0x7ec/0x890
[<
ffffff80091ec794>] isolate_migratepages_range+0x8c/0x100
[<
ffffff8009a8f34c>] aml_alloc_contig_migrate_range+0x104/0x158
[<
ffffff8009a8f518>] cma_boost_work_func+0x178/0x270
[<
ffffff80090cc228>] kthread+0xf8/0x110
[<
ffffff80090836c0>] ret_from_fork+0x10/0x50
Solution:
subtract isolated CMA pages when allocation large CMA for TVP.
Verify:
local
Change-Id: I96153cf104abb009a8965c2230a5242e495dd031
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
Zhiwei Yuan [Thu, 6 Dec 2018 06:18:07 +0000 (14:18 +0800)]
dts: TL1 ,change demod 8MB memory to CMA mode. [1/1]
PD#SWPL-2913
Problem:
for tl1 memory usage measurement
Solution:
use cma memory for dtmb instead of reserved
Verify:
verified by t962x2_x301
Change-Id: I7f5381a8458f5bbd9bbffc02c7fd792af92b783d
Signed-off-by: Zhiwei Yuan <zhiwei.yuan@amlogic.com>
Tao Guo [Wed, 5 Dec 2018 06:39:36 +0000 (06:39 +0000)]
codec_mm: show current tvp flag [1/2]
PD#OTT-937
Problem:
When kill mediacodec during playing drm, tvp memory not be freed
Solution:
Check tvp flag in kernel, free tvp memory if flag is not zero
Verify:
P212
Change-Id: I35cbb2808bf179710ec59bd5227995949946ee77
Signed-off-by: Tao Guo <tao.guo@amlogic.com>
pengcheng chen [Mon, 26 Nov 2018 12:14:26 +0000 (20:14 +0800)]
osd: fix afbc dd length error issue [1/1]
PD#SWPL-2674
Problem:
fix afbc dd length error issue
Solution:
add afbc_len to set screen_size
Verify:
verified on g12a-u200
Change-Id: I00df7945f0f928efe2b8be88c56f10f20bb1700f
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
Jihong Sui [Fri, 30 Nov 2018 07:51:21 +0000 (15:51 +0800)]
deinterlace: add NR 5 line set for TL1 [1/1]
PD#SWPL-2850
Problem:
add NR 5 line set for TL1
Solution:
add NR setting
Verify:
TL1
Change-Id: Iba105103a38ec244190f7cefbe66e7d662c7d0a2
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Jiamin Ma [Thu, 6 Dec 2018 07:26:57 +0000 (15:26 +0800)]
dts: fdto: the fdt is damaged in booting process [1/1]
PD#SWPL-2960
Problem:
If the overlay dts refers to a node which does not exist in the base
device tree, the final fdt will be in a damaged state after doing fdt
overlay
Solution:
Use the standard overlay dts syntax to note node to be applied instead
of the google recommended one
Verify:
Locally on P230
Change-Id: Ibf45abff1348437bc3fc2745e6d955cc8292db46
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
Hongmin Hua [Fri, 30 Nov 2018 07:55:59 +0000 (15:55 +0800)]
cec: set the phy port the same as ui id [2/2]
PD#SWPL-2685
Problem:
the atom switch wrong channel when wakeup by device
Solution:
set the phy port the same as ui id
Verify:
atom
Change-Id: I4e43f83af5bb30a2388df7e7030f135c3f0830ad
Signed-off-by: Hongmin Hua <hongmin.hua@amlogic.com>
Yong Qin [Fri, 30 Nov 2018 02:51:09 +0000 (10:51 +0800)]
hdmirx: for dump tmds data [1/1]
PD#SWPL-2931
Problem:
1.verify dump tmds data
Solution:
1.modify function and verify on tl1
Verify:
tl1
Change-Id: I36e922ba44f4f8c5201c9fb0869d65556a6e28c7
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Jian Hu [Wed, 5 Dec 2018 08:48:19 +0000 (16:48 +0800)]
clk: g12a: add gen clock [1/1]
PD#OTT-1025
Problem:
not support gen clock
Solution:
add gen clock
Verify:
test passed on g12a u200
Change-Id: I5199289d3cd1483fffbbd41f8d104369214ba302
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Xingyu Chen [Wed, 5 Dec 2018 11:13:21 +0000 (19:13 +0800)]
pinctrl: meson: add gen_clk_ee/ao pin groups for G12A/B [1/1]
PD#OTT-1025
Problem:
don't support gen_clk_ee and gen_clk_ao pin groups
Solution:
add gen_clk_ee/ao pin groups according to the corepinmux document
Verify:
test pass on U200
Change-Id: Ia3e61079def285c482d8dc4957b5f9e7db35847d
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
tao zeng [Mon, 15 Oct 2018 07:20:38 +0000 (15:20 +0800)]
mm: optimize thread stack usage on arm64 [1/1]
PD#SWPL-1219
Problem:
On arm64, thread stack is 16KB for each task. If running task number
is large, this type of memory may over 40MB. It's a large amount on
small memory platform. But most case thread only use less 4KB stack.
It's waste of memory and we need optimize it.
Solution:
1. Pre-allocate a vmalloc address space for task stack;
2. Only map 1st page for stack and handle page fault in EL1
when stack growth triggered exception;
3. handle stack switch for exception.
Verify:
p212
Change-Id: I47f511ccfa2868d982bc10a820ed6435b6d52ba9
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
Yi Zhou [Wed, 5 Dec 2018 06:21:03 +0000 (14:21 +0800)]
dv: fix the error hsize and vsize of dv core 2 [1/1]
PD#OTT-776
Problem:
dv core 2 get the error hsize and vsize from OSD module
Solution:
when opening 3 osd paths. we get the accurate the parameters again
Verify:
g12b s922
Change-Id: Ib6af084910c8cf1896060295c7cea75971cd86b6
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Jihong Sui [Tue, 4 Dec 2018 09:51:39 +0000 (17:51 +0800)]
deinterlace: deinterlace: fix coverity error [1/1]
PD#SWPL-2863
Problem:
cdev_add without checking return value.
Solution:
add check
Verify:
p212
Change-Id: Ib1d96f6e5ee07dd28f67eb4ee77acb6580a1f877
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Jihong Sui [Tue, 4 Dec 2018 09:25:29 +0000 (17:25 +0800)]
deinterlace: deinterlace: set post_ctrl when no mirror [1/1]
PD#SWPL-1076
Problem:
Kplayer 4KDemo.mp4, show green screen.
Solution:
add DI_IF1_GEN_REG set when no mirror
Verify:
p212
Change-Id: I2cfb27068393832fb47498ebdb9b93349f1fe635
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Pengcheng Chen [Wed, 5 Dec 2018 05:45:55 +0000 (13:45 +0800)]
osd: add osd log module control [2/2]
PD#SWPL-2551
Problem:
add osd log module control
Solution:
add osd log module control
Verify:
verified on P212
Change-Id: Iadbf795cb7afe4ddcab0f9283b9c7f542eca0b29
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Jian Cao [Wed, 5 Dec 2018 07:31:30 +0000 (15:31 +0800)]
osd: range of mouse is wrong under 4K mode [1/2]
PD#SWPL-2551
Problem:
range of mouse is wrong under 4K mode
Solution:
new cursor coordinate paras without using scale
add osd_cursor_hw_no_scale() to deal with it.
Verify:
verified on P212
Change-Id: I1748df569b96522eb58dc00af862983bca17815a
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
nengwen.chen [Wed, 5 Dec 2018 05:37:41 +0000 (13:37 +0800)]
atv_demod: modify atv demod code [1/1]
PD#SWPL-2295
Problem:
1.modify atv demod code for coverity.
2.add ntsc-m ring filter for t962x2.
3.merge code optimization from android l.
4.add tuner compatible info in dts for tuner debug.
Solution:
1.modify atv demod code for coverity.
2.add ntsc-m ring filter for t962x2.
3.merge code optimization from android l.
4.add tuner compatible info in dts for tuner debug.
Verify:
verified by einstein
Change-Id: I9696aa628315ee11f0c9dd279c7cc03797f04331
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Evoke Zhang [Wed, 5 Dec 2018 09:48:21 +0000 (17:48 +0800)]
arm: dts: t309: add t309-panel dtsi [1/1]
PD#SWPL-2787
Problem:
Bringup tl1 t309.
Solution:
Add device tree for t309 panel dtsi.
Verify:
t309
Change-Id: Id6caf588a60e0cda20197d8e80363b049df3a7dd
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>