Zbigniew Jędrzejewski-Szmek [Sun, 14 May 2017 02:42:08 +0000 (22:42 -0400)]
journald: use unaligned_read instead of memcpy
Zbigniew Jędrzejewski-Szmek [Fri, 12 May 2017 12:31:46 +0000 (08:31 -0400)]
nss-resolve: drop the internal fallback to libnss_dns (#5945)
If we could not communicate with systemd-resolved, we would call into
libnss_dns. libnss_dns would return NOTFOUND for stuff like "localhost" and
other names resolved by nss-myhostname, which we would fall under the !UNAVAIL=
condition and cause resolution to fail. So the following recommended
configuration in nsswitch.conf would not work:
hosts: resolve [!UNAVAIL=return] dns myhostname
Remove the internal fallback code completely so that the fallback logic
can be configured in nsswitch.conf.
Tested with
hosts: resolve [!UNAVAIL=return] myhostname
and
hosts: resolve [!UNAVAIL=return] dns myhostname
Fixes #5742.
Lennart Poettering [Fri, 12 May 2017 10:01:40 +0000 (12:01 +0200)]
Merge pull request #5928 from keszybz/libidn2
Use idn2 instead of idn
Lennart Poettering [Fri, 12 May 2017 10:00:24 +0000 (12:00 +0200)]
Merge pull request #5942 from keszybz/timestamp-writing
Allow timestamp to be set by the file writing utility functions
Lennart Poettering [Fri, 12 May 2017 09:58:13 +0000 (11:58 +0200)]
Merge pull request #5946 from evverx/test-sigbus-fixes
test-sigbus: use posix_fallocate rather than fallocate
Zbigniew Jędrzejewski-Szmek [Fri, 12 May 2017 08:49:48 +0000 (04:49 -0400)]
README: update util-linux required compilation options (#5949)
Fixes #5563.
Zbigniew Jędrzejewski-Szmek [Fri, 12 May 2017 01:53:12 +0000 (21:53 -0400)]
networkd: remove unused variables (#5948)
Fixup for
36423ff433.
Evgeny Vereshchagin [Thu, 11 May 2017 22:56:39 +0000 (01:56 +0300)]
tests: stop creating /TEST (#5943)
Closes #5856.
Matthijs van Duin [Thu, 11 May 2017 22:55:26 +0000 (00:55 +0200)]
sd-bus: fix c++ compatibility (#5941)
g++ annoyingly requires a non-empty struct-initializer to initialize all
struct members, in order of declaration.
Signed-off-by: Matthijs van Duin <matthijsvanduin@gmail.com>
Zbigniew Jędrzejewski-Szmek [Thu, 11 May 2017 22:53:35 +0000 (18:53 -0400)]
Merge pull request #5936 from ssahani/net-route
networkd: route replace parse prefix with generic in_addr_prefix_from_string
Zbigniew Jędrzejewski-Szmek [Thu, 11 May 2017 02:09:45 +0000 (22:09 -0400)]
mkosi: switch over to libidn2
Zbigniew Jędrzejewski-Szmek [Wed, 10 May 2017 01:56:34 +0000 (21:56 -0400)]
resolved: support libidn2 in addition to libidn
libidn2 2.0.0 supports IDNA2008, in contrast to libidn which supports IDNA2003.
https://bugzilla.redhat.com/show_bug.cgi?id=1449145
From that bug report:
Internationalized domain names exist for quite some time (IDNA2003), although
the protocols describing them have evolved in an incompatible way (IDNA2008).
These incompatibilities will prevent applications written for IDNA2003 to
access certain problematic domain names defined with IDNA2008, e.g., faß.de is
translated to domain xn--fa-hia.de with IDNA2008, while in IDNA2003 it is
translated to fass.de domain. That not only causes incompatibility problems,
but may be used as an attack vector to redirect users to different web sites.
v2:
- keep libidn support
- require libidn2 >= 2.0.0
v3:
- keep dns_name_apply_idna caller dumb, and keep the #ifdefs inside of the
function.
- use both ±IDN and ±IDN2 in the version string
Zbigniew Jędrzejewski-Szmek [Thu, 11 May 2017 18:00:25 +0000 (14:00 -0400)]
networkd: pretiffy message about invalid prefix
We know how the field we are parsing is called, let's put this information in
the error message:
"Route Source= prefix is invalid, ignoring assignment: ..."
"Route Destination= prefix is invalid, ignoring assignment: ..."
Zbigniew Jędrzejewski-Szmek [Thu, 11 May 2017 14:29:34 +0000 (10:29 -0400)]
update-done: use newly added library function to write the file
Fixes #5861.
Lennart Poettering [Thu, 11 May 2017 17:42:42 +0000 (19:42 +0200)]
Merge pull request #5893 from keszybz/memorydenywriteexecute
Add support for more arches for MemoryDenyWriteExecute
Zbigniew Jędrzejewski-Szmek [Thu, 11 May 2017 16:12:41 +0000 (12:12 -0400)]
pid1: improve logging when failing to remount / ro (#5940)
https://bugzilla.redhat.com/show_bug.cgi?id=1227736#c49
We counted how many filesystems could not be unmounted, but only for those
filesystems which we tried to unmount. Since we only remount / ro, without
attempting to unmount, we would emit a confusing error message:
Remounting '/' read-only with options 'seclabel,space_cache,subvolid=5,subvol=/'.
Remounting '/' read-only with options 'seclabel,space_cache,subvolid=5,subvol=/'.
Remounting '/' read-only with options 'seclabel,space_cache,subvolid=5,subvol=/'.
All filesystems unmounted.
Warn when remount-ro fails, and for filesystems which we won't try to unmount,
include the failure to remount-ro in n_failed.
A few minor cleanups:
- remove unecessary goto which jumps to the next line anyway
- always calculate n_failed, even if log_error is false. This causes no change
in behaviour, but I think the code is easier to follow, since the log setting
cannot influence other logic.
Zbigniew Jędrzejewski-Szmek [Thu, 11 May 2017 14:23:36 +0000 (10:23 -0400)]
basic/fileio: extend atomic file writing with timestamp setting
There should be no functional change.
Tom Gundersen [Thu, 11 May 2017 13:56:55 +0000 (15:56 +0200)]
busctl: monitor - only start printing messages once we have become a monitor (#5931)
A connection becomes a monitor the moment it loses its unique name, so any
messages received before that should not be dumped to the console.
Currently, we print NameAcquired and NameLost for the unique name of the
peer that becomes the monitor, simply discard all messages until we
receive our NameLost signal.
Zbigniew Jędrzejewski-Szmek [Thu, 11 May 2017 06:15:28 +0000 (02:15 -0400)]
core: fix warning about unsigned variable (#5935)
Fixup for
d8c92e8bc7351f553936b5235e1922c18ebd817a.
Susant Sahani [Thu, 11 May 2017 04:42:54 +0000 (10:12 +0530)]
networkd: route replace parse prefix with generic in_addr_prefix_from_string
Peter Hutterer [Thu, 11 May 2017 02:29:15 +0000 (12:29 +1000)]
hwdb: add the X200/X201 to the existing X201s entry (#5934)
https://bugs.freedesktop.org/show_bug.cgi?id=100628
Ray Strode [Thu, 11 May 2017 02:23:54 +0000 (22:23 -0400)]
man: fix LD_LIBRARY_PATH example in environment.d (#5929)
The example for LD_LIBRARY_PATH in the environment.d man page is wrong.
When setting LD_LIBRARY_PATH, the new directory usually needs to be at
the front so it overrides old directories.
In the example, the colon delimiter is correctly prepended to the front, but
the actual new path is erroneously appended to the end.
This commit moves it to the front where it belongs.
Peter Hutterer [Wed, 10 May 2017 19:22:00 +0000 (05:22 +1000)]
udev: don't allow pointing stick sensitivities greater than 255 (#5927)
It gets truncated, so the result is that people mess with the const accel
because the sensitivity isn't the expected 300 but the too-low 45.
One example: https://bugs.freedesktop.org/show_bug.cgi?id=100965
Lennart Poettering [Wed, 10 May 2017 17:46:13 +0000 (19:46 +0200)]
Merge pull request #5920 from fbuihuu/sysusers-disable-gshadow
Sysusers disable group shadow support
Zbigniew Jędrzejewski-Szmek [Tue, 9 May 2017 22:57:10 +0000 (18:57 -0400)]
seccomp: enable RestrictAddressFamilies on ppc64, autodetect SECCOMP_RESTRICT_ADDRESS_FAMILIES_BROKEN
We expect that if socket() syscall is available, seccomp works for that
architecture. So instead of explicitly listing all architectures where we know
it is not available, just assume it is broken if the number is not defined.
This should have the same effect, except that other architectures where it is
also broken will pass tests without further changes. (Architectures where the
filter should work, but does not work because of missing entries in
seccomp-util.c, will still fail.)
i386, s390, s390x are the exception — setting the filter fails, even though
socket() is available, so it needs to be special-cased
(https://github.com/systemd/systemd/issues/5215#issuecomment-
277241488).
This remove the last define in seccomp-util.h that was only used in test-seccomp.c. Porting
the seccomp filter to new architectures should be simpler because now only two places need
to be modified.
RestrictAddressFamilies seems to work on ppc64[bl]e, so enable it (the tests pass).
Franck Bui [Wed, 10 May 2017 12:28:41 +0000 (14:28 +0200)]
sysusers: make use of cleanup(unlink_and_freep) in write_files() and its auxiliary helpers
No functional changes.
Anchor Cat [Wed, 10 May 2017 11:23:58 +0000 (21:23 +1000)]
automount: ack automount requests even when already mounted (#5916)
If a process accesses an autofs filesystem while systemd is in the
middle of starting the mount unit on top of it, it is possible for the
autofs_ptype_missing_direct request from the kernel to be received after
the mount unit has been fully started:
systemd forks and execs mount ...
... access autofs, blocks
mount exits ...
systemd receives SIGCHLD ...
... kernel sends request
systemd receives request ...
systemd needs to respond to this request, otherwise the kernel will
continue to block access to the mount point.
Zbigniew Jędrzejewski-Szmek [Wed, 10 May 2017 11:09:52 +0000 (07:09 -0400)]
units: make descriptions of api filesystems less generic (#5914)
All those names were very generic. Fixes #5911.
Evgeny Vereshchagin [Wed, 10 May 2017 08:54:52 +0000 (08:54 +0000)]
test-sigbus: skip the test under valgrind
Evgeny Vereshchagin [Wed, 10 May 2017 08:47:39 +0000 (08:47 +0000)]
test-sigbus: use posix_fallocate rather than fallocate
Some filesystems do not support fallocate, so we need to fall back on
something like posix_fallocate.
Closes #5833
Franck Bui [Tue, 9 May 2017 12:02:37 +0000 (14:02 +0200)]
sysusers: make group shadow support configurable
Some distros (openSUSE) don't have group shadow support enabled. This can lead
to the following error:
# systemd-sysusers
Creating group foofoo with gid 478.
# systemd-sysusers
# groupdel foofoo
# systemd-sysusers
Creating group foofoo with gid 478.
Failed to write files: File exists
This patch adds --disable-gshadow option to configure. If used,
systemd-sysvusers won't consider /etc/gshadow.
Franck Bui [Tue, 9 May 2017 07:37:37 +0000 (09:37 +0200)]
sysusers: split make_files()
This patch extracts the code which is in charge to write the new users or
groups into temporary files and move it into 4 dedicated functions.
This part was previously inlined in makes_files() making this function quite
big and hard to read and maintain.
There should be no functional change.
Lennart Poettering [Tue, 9 May 2017 19:10:55 +0000 (21:10 +0200)]
50-udev-default.rules.in: set correct group for mediaX/cecX (#5921)
The /dev/mediaX and /dev/cecX devices belong to the video group.
Add two default rules for that.
The /dev/cecX devices were introduced in kernel 4.8 in staging and moved
out of staging in 4.10. These devices support the HDMI CEC bus.
The /dev/mediaX devices are much older, but because they are not used very
frequently nobody got around to adding this rule to systemd. They let the
user control complex media pipelines.
Max Resch [Tue, 9 May 2017 18:57:40 +0000 (20:57 +0200)]
sd-boot: added shim signature/MOK validation (#5702)
Adds support for booting in a SecureBoot environment with shim as a
preloader. Install an appropriate UEFI security policy to check PE
signature of a chained kernel or UEFI application (using LoadImage())
against the MOK database maintained by shim, using shim's installed
BootServices.
Implementation details for installing the security policy are based on
code from the LinuxFoundation's SecureBoot PreLoader, part of efitools
licensed under LGPL 2.1
Current signed (by Microsoft) versions of shim (Versions 0.8 & 0.9)
so not install a security policy by themselves, future Versions of
shim might (a compile time switch exists in rectent git versions),
so in the future this PR might become unnecessary.
Lennart Poettering [Tue, 9 May 2017 18:49:17 +0000 (20:49 +0200)]
Merge pull request #5619 from fbuihuu/fully-restore-unit-cgroup-state
core: when deserializing a unit, fully restore its cgroup state
Lennart Poettering [Tue, 9 May 2017 18:42:32 +0000 (20:42 +0200)]
Merge pull request #5420 from OpenDZ/tixxdz/namespace-fixes-v2
Namespace: RootImage= RootDirectory= and MountAPIVFS fixes
Susant Sahani [Tue, 9 May 2017 18:25:11 +0000 (18:25 +0000)]
network: add support for vlan confs(MVRP, reorder header, loose binding) (#5834)
Ted W [Tue, 9 May 2017 18:22:04 +0000 (13:22 -0500)]
man: Clarify Restart= exception for systemctl stop (#5891)
Lennart Poettering [Tue, 9 May 2017 18:12:52 +0000 (20:12 +0200)]
Merge pull request #5906 from keszybz/man-links
man page link fixes
Hristo Venev [Tue, 9 May 2017 18:04:55 +0000 (19:04 +0100)]
networkd: add IPv6ProxyNDP (#5913)
This allows enabling proxy_ndp even if no addresses are configured in
networkd, as well as disabling proxy_ndp from a drop-in.
Susant Sahani [Tue, 9 May 2017 18:01:25 +0000 (18:01 +0000)]
networkd: add support to configure route protocol. (#5890)
Closes: #5889
Lennart Poettering [Tue, 9 May 2017 17:32:25 +0000 (19:32 +0200)]
Merge pull request #5919 from glaubitz/suse
Fix meson build on openSUSE Tumbleweed
John Paul Adrian Glaubitz [Tue, 9 May 2017 17:31:38 +0000 (19:31 +0200)]
build: Add missing SECCOMP_CFLAGS to test-seccomp and test-execute targets (#5924)
John Paul Adrian Glaubitz [Tue, 9 May 2017 11:00:26 +0000 (13:00 +0200)]
meson: Add missing dependency on libkmod for libudev_core
John Paul Adrian Glaubitz [Tue, 9 May 2017 10:58:32 +0000 (12:58 +0200)]
meson: Add missing dependency on libseccomp for libcore
Aggelos Avgerinos [Mon, 8 May 2017 23:09:22 +0000 (02:09 +0300)]
execute: Properly log errors considering socket fds (#5910)
Till now if the params->n_fds was 0, systemd was logging that there were
more than one sockets.
Thanks @gregoryp and @VFXcode who did the most work debugging this.
Mark Stosberg [Mon, 8 May 2017 23:05:34 +0000 (19:05 -0400)]
man: improve readability of time shorthands and their normalized forms. (#5912)
Pascal S. de Kloe [Mon, 8 May 2017 01:46:31 +0000 (03:46 +0200)]
hwdb: add axis range for Panasonic Toughbook CF-19, CF-30 and CF31 (#5908)
Michael Biebl [Mon, 8 May 2017 00:30:27 +0000 (02:30 +0200)]
Merge pull request #5907 from keszybz/mark-python-scripts-+x
Mark python scripts executable
Ian Wienand [Mon, 8 May 2017 00:23:49 +0000 (10:23 +1000)]
Add short-iso-precise for journalctl output (#5884)
This adds a short-iso-precise option for journalctl output. It is similar to
short-iso, but includes microseconds.
Zbigniew Jędrzejewski-Szmek [Sun, 7 May 2017 15:35:32 +0000 (11:35 -0400)]
Mark python scripts executable
Since all our python scripts have a proper python3 shebang, there is no benefit
to letting meson autodetect them. On linux, meson will just uses exec(), so the
shebang is used anyway. The only difference should be in how meson reports the
script and that the detection won't fail for (most likely misconfigured)
non-UTF8 locales.
Closes #5855.
Zbigniew Jędrzejewski-Szmek [Thu, 4 May 2017 20:47:26 +0000 (16:47 -0400)]
test-af-list: drop unnecessary backslash
Zbigniew Jędrzejewski-Szmek [Fri, 5 May 2017 03:10:30 +0000 (23:10 -0400)]
seccomp: assume clone() arg order is known on all architectures
While adding the defines for arm, I realized that we have pretty much all
known architectures covered, so SECCOMP_RESTRICT_NAMESPACES_BROKEN is not
necessary anymore. clone(2) is adamant that the order of the first two
arguments is only reversed on s390/s390x. So let's simplify things and remove
the #if.
Zbigniew Jędrzejewski-Szmek [Fri, 5 May 2017 03:10:31 +0000 (23:10 -0400)]
seccomp: add mmap/shmat defines for arm and arm64
Zbigniew Jędrzejewski-Szmek [Fri, 5 May 2017 03:10:30 +0000 (23:10 -0400)]
seccomp: add mmap/shmat defines for ppc64
Zbigniew Jędrzejewski-Szmek [Fri, 5 May 2017 03:10:30 +0000 (23:10 -0400)]
seccomp: factor out seccomp_rule_add_exact to a helper function
Zbigniew Jędrzejewski-Szmek [Thu, 4 May 2017 14:09:53 +0000 (14:09 +0000)]
seccomp: drop SECCOMP_MEMORY_DENY_WRITE_EXECUTE_BROKEN, add test for shmat
SECCOMP_MEMORY_DENY_WRITE_EXECUTE_BROKEN was conflating two separate things:
1. whether shmat/shmdt/shmget can be filtered (if ipc multiplexer is used, they can not)
2. whether we know this for the current architecture
For i386, shmat is implemented as ipc, so seccomp filter is "broken" for shmat,
but not for mmap, and SECCOMP_MEMORY_DENY_WRITE_EXECUTE_BROKEN cannot be used
to cover both cases. The define was only used for tests — not in the implementation
in seccomp-util.c. So let's get rid of SECCOMP_MEMORY_DENY_WRITE_EXECUTE_BROKEN
and encode the right condition directly in tests.
Zbigniew Jędrzejewski-Szmek [Sun, 7 May 2017 15:29:55 +0000 (11:29 -0400)]
man: fix two references to our own binaries
Zbigniew Jędrzejewski-Szmek [Sun, 7 May 2017 15:29:40 +0000 (11:29 -0400)]
man: fix links to external man pages
linkchecker ftw!
Lennart Poettering [Sun, 7 May 2017 11:13:13 +0000 (07:13 -0400)]
Merge pull request #5901 from keszybz/mkosi-meson
Convert mkosi instructions to meson
Zbigniew Jędrzejewski-Szmek [Sun, 7 May 2017 11:03:28 +0000 (07:03 -0400)]
tree-wide: use SET_FLAG in more places (#5892)
Zbigniew Jędrzejewski-Szmek [Sat, 6 May 2017 01:19:04 +0000 (21:19 -0400)]
mkosi.build: set encoding
Otherwise python3 (via meson) complains.
Zbigniew Jędrzejewski-Szmek [Sat, 6 May 2017 01:18:54 +0000 (21:18 -0400)]
mkosi.fedora: we need lz4 for lz4cat
Zbigniew Jędrzejewski-Szmek [Sat, 6 May 2017 01:18:44 +0000 (21:18 -0400)]
mkosi: switch build to meson
For Fedora, the version is bumped to 26. In F25, ninja is still called ninja-build
(while the package with the rename is going through QA).
Susant Sahani [Sat, 6 May 2017 00:04:07 +0000 (00:04 +0000)]
socket-util: add parse_ip_prefix (#5867)
networkd: replace parse prefix with generic in_addr_prefix_from_string
Mark Stosberg [Fri, 5 May 2017 23:00:45 +0000 (19:00 -0400)]
man: document that OnCalendar may be specified more than once. (#5885)
It's helpful to know you can provide this more than once, rather than try
to make a more complicated / less clear single expression.
Zbigniew Jędrzejewski-Szmek [Fri, 5 May 2017 01:29:59 +0000 (21:29 -0400)]
man: fix URL for kernel-parameters doc
With the move to sphinx-generated docs, the old URL seems to have stopped
working and returns 404.
Franck Bui [Mon, 27 Mar 2017 16:00:54 +0000 (18:00 +0200)]
core: when deserializing a unit, fully restore its cgroup state
The state of a unit was not fully restored, especially the
"cgroup_realized_mask/cgroup_enabled_mask" fields were missing.
This could be seen with the following sequence:
$ systemctl show -p TasksCurrent sshd
TasksCurrent=1
$ systemctl daemon-reload
$ systemctl show -p TasksCurrent sshd
TasksCurrent=
18446744073709551615
This was also visible with the "status" command: "Tasks: " row wasn't
showed in status of a service after a "daemon-reload" command.
Franck Bui [Tue, 2 May 2017 07:59:17 +0000 (09:59 +0200)]
core: introduce cg_mask_from_string()/cg_mask_to_string()
Zbigniew Jędrzejewski-Szmek [Wed, 3 May 2017 19:50:19 +0000 (19:50 +0000)]
test-seccomp: limit the code under #ifdef
Try to make the paths for supported and unsupported architectures as
similar as possible.
James Cowgill [Wed, 3 May 2017 16:35:45 +0000 (17:35 +0100)]
seccomp: add clone syscall definitions for mips (#5880)
Also updates the documentation and adds a mention of ppc64 support
which was enabled by #5325.
Tested on Debian mipsel and mips64el. The other 4 mips architectures
should have an identical user <-> kernel ABI to one of the 2 tested
systems.
Michael Biebl [Wed, 3 May 2017 14:45:31 +0000 (16:45 +0200)]
Merge pull request #5842 from keszybz/meson-status-and-conditionals
Meson status and conditional simplification
Zbigniew Jędrzejewski-Szmek [Fri, 28 Apr 2017 01:13:08 +0000 (21:13 -0400)]
meson: use booleans for conf.set and drop unecessary conditionals
Using conf.set() with a boolean argument does the right thing:
either #ifdef or #undef. This means that conf.set can be used unconditionally.
Previously I used '1' as the placeholder value, and that needs to be changed to
'true' for consistency (under meson 1 cannot be used in boolean context). All
checks need to be adjusted.
Zbigniew Jędrzejewski-Szmek [Fri, 28 Apr 2017 00:54:52 +0000 (20:54 -0400)]
meson: add status report
This is similar to what ./configure prints. Instead of a long list of yes/no lines,
I added two lines at the end with "enabled features" and "disabled features".
This is what the mplayer/mencoder ./configure script did back in the day.
The advantage is that it's easy to look at the list of disabled features
and check for any unexpected entries.
Zbigniew Jędrzejewski-Szmek [Fri, 28 Apr 2017 00:51:34 +0000 (20:51 -0400)]
meson: add forgotten debug options
v2:
-rename -Dextra-debug to -Ddebug to match ./configure --debug
Patrik Flykt [Tue, 2 May 2017 19:36:24 +0000 (22:36 +0300)]
sd-ndisc: Reset counter for sent Router Solicitations (#5874)
Reset also the counter for number of Router Solicitations sent when
the associated file descriptor is closed and the event source
unreferenced. With this change the router discovery can now be
stopped and restarted arbitrary many times.
Dimitri John Ledkov [Tue, 2 May 2017 19:32:42 +0000 (20:32 +0100)]
network: reject bridge port priorities above kernel's max value. (#5877)
Bridge port priority in the kernel can only be between 0 and 63. Therefore
reject values above maximum.
Fixes: #5729
Michael Biebl [Tue, 2 May 2017 19:30:14 +0000 (21:30 +0200)]
build-sys: re-add systemd.directives and systemd.index to MANPAGES (#5876)
Those were dropped accidentally in commit
19fe49f62cc916f1237ea92a04fc80ee75285dde, most likely by running
make update-man-list. This is a known limitation of the autotools build:
the man pages must be built before update-man-list is called.
Peter Hutterer [Tue, 2 May 2017 06:53:08 +0000 (16:53 +1000)]
hwdb: update axis ranges for the Asus UX301LAA touchpad (#5872)
https://bugs.freedesktop.org/show_bug.cgi?id=100873
Michael Biebl [Mon, 1 May 2017 17:18:02 +0000 (19:18 +0200)]
Merge pull request #5871 from keszybz/meson-html-2
meson: make sure html symlinks are also created in build directory
Zbigniew Jędrzejewski-Szmek [Mon, 1 May 2017 04:17:20 +0000 (00:17 -0400)]
meson: make sure html symlinks are also created in build directory
The symlinks should be created in the build directory in two cases: when
configuration specifies -Dhtml=true, or when ninja html target is built.
Normally install : {true,false} is used to decide if a target should be built,
but in this case, we cannot use install : true, because, as described in
488477d101, that results in the target file being copied into the
installation directory instead of a symlink. So we need a work-around. To
achieve the first end, the commands to create the symlinks are added as
dependencies of the command to create the html page. To the second end, they
are added as dependencies of the html target.
Follow-up for
488477d101 and
064d9ef0d7.
Michael Biebl [Mon, 1 May 2017 15:02:17 +0000 (17:02 +0200)]
meson: create index.html symlink pointing at systemd.index.html (#5870)
Re-use bits from
488477d1011559078dbebfea18e22dcc1c9ca7ea to create the
index.html symlink.
Fixes #5862
Michael Biebl [Mon, 1 May 2017 13:21:51 +0000 (15:21 +0200)]
Merge pull request #5869 from keszybz/meson-html
meson: fix creation of html symlinks
Zbigniew Jędrzejewski-Szmek [Mon, 1 May 2017 04:17:20 +0000 (00:17 -0400)]
meson: fix creation of html symlinks
This adds two somewhat independent rules:
1. to create symlinks to html pages in the build directory
2. to create symlinks in the installation directory
The second part needs to be coded separately, because telling meson to install
the symlinks created in step 1. results in a copy of the target, instead of a
symlink. So step 2. needs to ignore the result of 1. and create the symlink again.
Fixes #5863.
Jörg Thalheim [Mon, 1 May 2017 00:26:56 +0000 (02:26 +0200)]
more portable python shebangs (#5816)
This is useful on systems like NixOS, where python3 is not in
/usr/bin/python3 as well as for people using alternative ways to
install python such as virtualenv/pyenv.
Michael Biebl [Sun, 30 Apr 2017 16:21:59 +0000 (18:21 +0200)]
build-sys: don't generate index.html with --disable-manpages (#5865)
Don't generate man/index.html and the dependent man/systemd.index.html
if man pages have been disabled.
Closes #5854
Roelf Wichertjes [Sun, 30 Apr 2017 11:12:32 +0000 (13:12 +0200)]
networkd: Add check to ensure link is down before attempting to enslave (#5853)
netdev to bond.
There are situations where a link can be in an "UP" state when
systemd-networkd attempts to add the link to a bond device.
This is a problem because the bonding driver will refuse to
enslave a link if it is in the "UP" state.
This check ensures systemd-networkd sets the link to "DOWN"
before attempting to add the link to the bond.
Fixes #5838.
Lennart Poettering [Sun, 30 Apr 2017 09:36:12 +0000 (11:36 +0200)]
Merge pull request #5808 from ssahani/util
conf parser: add config_parse_ip_port
Max Resch [Sun, 30 Apr 2017 02:11:34 +0000 (04:11 +0200)]
sd-boot: remove compiler warning (#5860)
This small fixup removes a compiler warning when passing tcg (a const
arg type) to the uefi call wapper, which does not define it as const.
All other source files in sd-boot do this cast except measure.c, so
let's fix that.
Martin Pitt [Sat, 29 Apr 2017 19:19:24 +0000 (21:19 +0200)]
Merge pull request #5809 from keszybz/glob-safe
Implement `safe_glob` that ignores "." and ".."
Susant Sahani [Sat, 29 Apr 2017 18:04:17 +0000 (23:34 +0530)]
conf parser: add config_parse_ip_port
Yusuke Nojima [Sat, 29 Apr 2017 17:37:53 +0000 (02:37 +0900)]
journald: fix assertion failure on journal_file_link_data. (#5843)
When some error occurs during the initialization of JournalFile,
the JournalFile can be left without hash tables created. When later
trying to append an entry to that file, the assertion in
journal_file_link_data() fails, and journald crashes.
This patch fix this issue by checking *_hash_table_size in
journal_file_verify_header().
Susant Sahani [Thu, 27 Apr 2017 05:14:22 +0000 (10:44 +0530)]
networkd: replace geneve/vxlan port parsing with generic config_parse_ip_port
Susant Sahani [Thu, 27 Apr 2017 05:11:46 +0000 (10:41 +0530)]
config parser: Introduce config_parse_ip_port
Lennart Poettering [Sat, 29 Apr 2017 16:40:19 +0000 (18:40 +0200)]
Merge pull request #5164 from Werkov/ordering-for-_netdev-devices
Ordering for _netdev devices
Lennart Poettering [Sat, 29 Apr 2017 16:35:56 +0000 (18:35 +0200)]
Merge pull request #5783 from keszybz/compiler-warning-fixes
shared/extract-word: replace enum with int to avoid undefined behaviour
Lennart Poettering [Sat, 29 Apr 2017 11:42:09 +0000 (13:42 +0200)]
Merge pull request #5529 from ssahani/label
networkd / sd-netlink: add support for address label
Martin Pitt [Sat, 29 Apr 2017 11:39:47 +0000 (13:39 +0200)]
Merge pull request #5852 from phomes/trivial
Trivial cleanups
Lennart Poettering [Sat, 29 Apr 2017 10:30:29 +0000 (12:30 +0200)]
Merge pull request #5801 from keszybz/help-error
nspawn,cgtop: make sure --version, --help always work
Max Resch [Sat, 29 Apr 2017 10:24:25 +0000 (12:24 +0200)]
sd-boot: remove unnecessary defines (#5848)
As discussed in #5829 `#define` is not necessary, meson and autotools
set the correct compiler flags and the default value is provided by them.