drm/amdgpu: revert context to stop engine before mode2 reset

For some hang caused by slow tests, engine cannot be stopped which
may cause resume failure after reset. In this case, force halt
engine by reverting context addresses

Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: save and restore gc hub regs

Save and restore gfxhub regs as they will be reset during mode 2

Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add debugfs amdgpu_reset_level

Introduce amdgpu_reset_level debugfs in order to help debug and
test specific type of reset. Also helps blocking unwanted type of
resets.

By default, mode2 reset will not be enabled

v2: make this debugfs in adev and use debugfs_create_u32

Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: let mode2 reset fallback to default when failure

- introduce AMDGPU_SKIP_MODE2_RESET flag
- let mode2 reset fallback to default reset method if failed

v2: move this part out from the asic specific part

Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add mode2 reset for sienna_cichlid

To meet the requirement for multi container usecase which needs
a quicker reset and not causing VRAM lost, adding the Mode2
reset handler for sienna_cichlid.

v2: move skip mode2 flag part separately

v3: remove the use of asic_reset_res

Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd/amdgpu: add pipe1 hardware support"

This reverts commit 4c7631800e6bf0eced08dd7b4f793fcd972f597d.

Triggered GFX hangs with GNOME Wayland on Navi 21.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2117
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix use-after-free on amdgpu_bo_list mutex

If amdgpu_cs_vm_handling returns r != 0, then it will unlock the
bo_list_mutex inside the function amdgpu_cs_vm_handling and again on
amdgpu_cs_parser_fini. This problem results in the following
use-after-free problem:

[ 220.280990] ------------[ cut here ]------------
[ 220.281000] refcount_t: underflow; use-after-free.
[ 220.281019] WARNING: CPU: 1 PID: 3746 at lib/refcount.c:28 refcount_warn_saturate+0xba/0x110
[ 220.281029] ------------[ cut here ]------------
[ 220.281415] CPU: 1 PID: 3746 Comm: chrome:cs0 Tainted: G W L ------- --- 5.20.0-0.rc0.20220812git7ebfc85e2cd7.10.fc38.x86_64 #1
[ 220.281421] Hardware name: System manufacturer System Product Name/ROG STRIX X570-I GAMING, BIOS 4403 04/27/2022
[ 220.281426] RIP: 0010:refcount_warn_saturate+0xba/0x110
[ 220.281431] Code: 01 01 e8 79 4a 6f 00 0f 0b e9 42 47 a5 00 80 3d de
7e be 01 00 75 85 48 c7 c7 f8 98 8e 98 c6 05 ce 7e be 01 01 e8 56 4a
6f 00 <0f> 0b e9 1f 47 a5 00 80 3d b9 7e be 01 00 0f 85 5e ff ff ff 48
c7
[ 220.281437] RSP: 0018:ffffb4b0d18d7a80 EFLAGS: 00010282
[ 220.281443] RAX: 0000000000000026 RBX: 0000000000000003 RCX: 0000000000000000
[ 220.281448] RDX: 0000000000000001 RSI: ffffffff988d06dc RDI: 00000000ffffffff
[ 220.281452] RBP: 00000000ffffffff R08: 0000000000000000 R09: ffffb4b0d18d7930
[ 220.281457] R10: 0000000000000003 R11: ffffa0672e2fffe8 R12: ffffa058ca360400
[ 220.281461] R13: ffffa05846c50a18 R14: 00000000fffffe00 R15: 0000000000000003
[ 220.281465] FS: 00007f82683e06c0(0000) GS:ffffa066e2e00000(0000) knlGS:0000000000000000
[ 220.281470] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 220.281475] CR2: 00003590005cc000 CR3: 00000001fca46000 CR4: 0000000000350ee0
[ 220.281480] Call Trace:
[ 220.281485] <TASK>
[ 220.281490] amdgpu_cs_ioctl+0x4e2/0x2070 [amdgpu]
[ 220.281806] ? amdgpu_cs_find_mapping+0xe0/0xe0 [amdgpu]
[ 220.282028] drm_ioctl_kernel+0xa4/0x150
[ 220.282043] drm_ioctl+0x21f/0x420
[ 220.282053] ? amdgpu_cs_find_mapping+0xe0/0xe0 [amdgpu]
[ 220.282275] ? lock_release+0x14f/0x460
[ 220.282282] ? _raw_spin_unlock_irqrestore+0x30/0x60
[ 220.282290] ? _raw_spin_unlock_irqrestore+0x30/0x60
[ 220.282297] ? lockdep_hardirqs_on+0x7d/0x100
[ 220.282305] ? _raw_spin_unlock_irqrestore+0x40/0x60
[ 220.282317] amdgpu_drm_ioctl+0x4a/0x80 [amdgpu]
[ 220.282534] __x64_sys_ioctl+0x90/0xd0
[ 220.282545] do_syscall_64+0x5b/0x80
[ 220.282551] ? futex_wake+0x6c/0x150
[ 220.282568] ? lock_is_held_type+0xe8/0x140
[ 220.282580] ? do_syscall_64+0x67/0x80
[ 220.282585] ? lockdep_hardirqs_on+0x7d/0x100
[ 220.282592] ? do_syscall_64+0x67/0x80
[ 220.282597] ? do_syscall_64+0x67/0x80
[ 220.282602] ? lockdep_hardirqs_on+0x7d/0x100
[ 220.282609] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 220.282616] RIP: 0033:0x7f8282a4f8bf
[ 220.282639] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10
00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00
0f 05 <89> c2 3d 00 f0 ff ff 77 18 48 8b 44 24 18 64 48 2b 04 25 28 00
00
[ 220.282644] RSP: 002b:00007f82683df410 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 220.282651] RAX: ffffffffffffffda RBX: 00007f82683df588 RCX: 00007f8282a4f8bf
[ 220.282655] RDX: 00007f82683df4d0 RSI: 00000000c0186444 RDI: 0000000000000018
[ 220.282659] RBP: 00007f82683df4d0 R08: 00007f82683df5e0 R09: 00007f82683df4b0
[ 220.282663] R10: 00001d04000a0600 R11: 0000000000000246 R12: 00000000c0186444
[ 220.282667] R13: 0000000000000018 R14: 00007f82683df588 R15: 0000000000000003
[ 220.282689] </TASK>
[ 220.282693] irq event stamp: 6232311
[ 220.282697] hardirqs last enabled at (6232319): [<ffffffff9718cd7e>] __up_console_sem+0x5e/0x70
[ 220.282704] hardirqs last disabled at (6232326): [<ffffffff9718cd63>] __up_console_sem+0x43/0x70
[ 220.282709] softirqs last enabled at (6232072): [<ffffffff970ff669>] __irq_exit_rcu+0xf9/0x170
[ 220.282716] softirqs last disabled at (6232061): [<ffffffff970ff669>] __irq_exit_rcu+0xf9/0x170
[ 220.282722] ---[ end trace 0000000000000000 ]---

Therefore, remove the mutex_unlock from the amdgpu_cs_vm_handling
function, so that amdgpu_cs_submit and amdgpu_cs_parser_fini can handle
the unlock.

Fixes: 90af0ca047f3 ("drm/amdgpu: Protect the amdgpu_bo_list list with a mutex v2")
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix interrupt handling on ih_soft ring

There are no backing hardware registers for ih_soft ring.
As a result, don't try to access hardware registers for read
and write pointers when processing interrupts on the IH soft
ring.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add secure display TA load for Renoir

Add secure display TA load for Renoir

Signed-off-by: Shane Xiao <shane.xiao@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Include scaling factor for SubVP command

[Description]
For SubVP scaling cases, we must include the scaling
info as part of the cmd. This is required when converting
OTG line to HUBP line for the MALL_START_LINE programming.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: Return void from the stop_dbg_mode

There is no point in returning an int here. It only returns 0 which
the caller never uses. Therefore return void and remove the unnecessary
assignment.

Addresses-Coverity: 1504988 ("Unused value")
Fixes: 8da1170a16e4 ("drm/amdgpu: add VCN4 ip block support")
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Suggested-by: Ruijing Dong <ruijing.dong@amd.com>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Khalid Masum <khalid.masum.92@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove useless condition in amdgpu_job_stop_all_jobs_on_sched()

Local variable 'rq' is initialized by an address
of field of drm_sched_job, so it does not make
sense to compare 'rq' with NULL.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Andrey Strachuk <strochuk@ispras.ru>
Fixes: 7c6e68c777f1 ("drm/amdgpu: Avoid HW GPU reset for RAS.")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add decode_iv_ts helper for ih_v6 block

Was missing.  Add it.

Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add chip revision to DCN32

[Why & How]
Add GC_11_0_3_A0 as a chip revision to the DCN32 family

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: avoid doing vm_init multiple time

[why]
this is to ensure that driver will not reprogram hvm_prefetch_req again if
it is done.

Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use pitch when calculating size to cache in MALL

[Description]
Use pitch when calculating size to cache in MALL

Reviewed-by: Samson Tam <Samson.Tam@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Don't set DSC for phantom pipes

[Description]
Don't set DSC bit for phantom pipes, not
required since phantom pipe don't have
any actual output

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update clock table policy for DCN314

[Why & How]
Depending on how the clock table is constructed from PMFW we can run
into issues where we don't think we have enough bandwidth available
due to FCLK too low - eg. when the FCLK table contains invalid entries
or a single entry.

We should always pick up the maximum clocks for each state as a final
state in this case to prevent validation from failing if the table is
malformed.

We should also contain sensible defaults in the case where values
are invalid.

Redfine the clock table structures by adding a 314 prefix to make
debugging these issues easier by avoiding symbol name clashes.

Overall this policy more closely aligns to how we did things for 315,
but because of how the voltage rail is setup we should favor keeping
DCFCLK low rather than DISPCLK or DPPCLK - so use the max for those
in every entry.

Reviewed-by: Daniel Miess <daniel.miess@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Modify header inclusion pattern

[Why]
Recent backport from opensource broke the Nightly tool build
that tests DC and DML for bugs and regressions. This was
because the backport had a header inclusion that was not
consistent with the AMD style of including headers was allowed
to be merged back in DML code that caused tool compilation
failures.

[How]
Modify the way in which the header file in included so that it
is consistent with AMD style of including headers. This then
automatically fixes the tool compilation process and also
helps maintain the code quality and consistency.

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix plug/unplug external monitor will hang while playback MPO video

[Why]
Pipes for MPO primary and overlay will be power down and power up during
plug/unplug external monitor while MPO video playback.
But the pipes were the same after plug/unplug and should not need to be
power down and power up or it will make page flip interrupt disabled and
cause hang issue.

[How]
Add pipe split change condition that not only check the top pipe pointer
but also check the index of top pipe if both top pipes are available.

Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add debug parameter to retain default clock table

[Why]
Need a way to retain default clock table to aid
the investigation into why 8k@30 display not
lighting up on dcn314

[How]
Use flag to prevent execution of bw_params helper
function and function for updating bw_bounding_box

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Daniel Miess <Daniel.Miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Increase tlb flush timeout for sriov

[Why]
During multi-vf executing benchmark (Luxmark) observed kiq error timeout.
It happenes because all of VFs do the tlb invalidation at the same time.
Although each VF has the invalidate register set, from hardware side
the invalidate requests are queue to execute.

[How]
In case of 12 VF increase timeout on 12*100ms

Signed-off-by: Dusica Milinkovic <Dusica.Milinkovic@amd.com>
Acked-by: Shaoyun Liu <shaoyun.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: do not compare integers of different widths

[Why & How]
Increase width of some variables to avoid comparing integers of
different widths.

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add reserved dc_log_type.

Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix pixel clock programming

[Why]
Some pixel clock values could cause HDMI TMDS SSCPs to be misaligned
between different HDMI lanes when using YCbCr420 10-bit pixel format.

BIOS functions for transmitter/encoder control take pixel clock in kHz
increments, whereas the function for setting the pixel clock is in 100Hz
increments. Setting pixel clock to a value that is not on a kHz boundary
will cause the issue.

[How]
Round pixel clock down to nearest kHz in 10/12-bpc cases.

Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.198

This version brings along following fixes:

-Fix edp panel missing event
-Set ARGB16161616 pixel format to 26
-Fix dcn32 interger issue
-Clear optc underflow bit after ODM clock off
-Fix issue with stereo3D
-Fix DML2 lightup issue
-Correct DTBCLK for dcn314
-Revert for a regression
-Fix clocks and bugs in DML2
-Enable SubVP by defalut on DCN32 & DCN321
-Corret boundary condition for engin ID on DCN303
-Fix FRL encoder override registry key
-Fix VPG for dcn314 HPO
-Fix Linux compile-time warning
-Add new prefetch modes in DML for DCN32

Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: reverted limiting vscsdp_for_colorimetry and ARGB16161616 pixel format addition

[WHY]
Limiting vscsdp_for_colorimetry for YCbCr420/BT2020 resulted in red/green
point failures in HDR10 DTN tests. The re-implementation of ARGB16161616
was to fix this however it did not actually fix this issue but a side effect of the
issue.

[HOW]
Change ARGB16161616 pixel format to 26.

Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Ethan Wellenreiter <Ethan.Wellenreiter@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Enable GFXOFF feature for SMU IP v13.0.4

The driver needs to set EnableGfxImu message parameter to tell the PMFW
to set the flag that enables the GFXOFF feature.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable IH Clock Gating for OSS IP v6.0.1

Enable AMD_CG_SUPPORT_IH_CG support.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: potential crash in kfd_create_indirect_link_prop()

This code has two bugs.  If kfd_topology_device_by_proximity_domain()
failed on the first iteration through the loop then "cpu_link" is
uninitialized and should not be dereferenced.

The second bug is that we cannot dereference a list iterator when it
points to the list head.  In other words, if we exit the
list_for_each_entry() loop exits without hitting a break then "cpu_link"
is not a valid pointer and should not be dereferenced.

Fix both of these problems by setting "cpu_link" to NULL when it is invalid
and non-NULL when it is valid.  That makes it easier to test for
valid vs invalid.

Fixes: 0f28cca87e9a ("drm/amdkfd: Extend KFD device topology to surface peer-to-peer links")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: reserve 2 queues for sdma 6.0.1 in bitmap

There is only one engine in sdma 6.0.1, the total number of
reserved queues should be 2, reflect this number in bitmap as well.

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable ATHUB IP v3.0.1 Clock Gating

Enable AMD_CG_SUPPORT_ATHUB_MGCG and AMD_CG_SUPPORT_ATHUB_LS support.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable HDP IP v5.2.1 Clock Gating

Enable AMD_CG_SUPPORT_HDP_MGCG and AMD_CG_SUPPORT_HDP_LS support.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable MMHUB IP v3.0.1 Clock Gating

Enable AMD_CG_SUPPORT_MC_MGCG and AMD_CG_SUPPORT_MC_LS support.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add ATHUB IP v3.0.1 Clock Gating support

Add ATHUB IP v3.0.1 in athub_v3_0_set_clockgating.

The regATHUB_MISC_CNTL has different offset for ATHUB IP v3.0.1,
so need to add IP version checking to use the right REG offset.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add HDP IP v5.2.1 Clock Gating support

Add set/get_clockgating for HDP IP v5.2.1.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add MMHUB IP v3.0.1 Clock Gating support

Add set/get_clockgating for MMHUB IP v3.0.1.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: update the smu driver interface version for SMU IP v13.0.4

The pmfw has changed the driver interface version, so keep same with the
fw.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Fix mm reference in SVM eviction worker

Use the mm reference from the fence. This allows removing the
svm_bo->svms pointer, which was problematic because we cannot assume
that the struct kfd_process containing the svms is still allocated
without holding a refcount on the process.

Use mmget_not_zero to ensure the mm is still valid, and drop the svm_bo
reference if it isn't.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: add mode1 support on smu_v13_0_7

add mode1 support since it's missing on smu_v13_0_7

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: add ih cg and hdp sd on smu_v13_0_7

add ih cg and hdp sd on smu_v13_0_7

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: add missing ->fini_xxxx interfaces for some SMU13 asics

Without these, potential memory leak may be induced.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: add missing ->fini_microcode interface for Sienna Cichlid

To avoid any potential memory leak.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: disable 3DCGCG/CGLS temporarily due to stability issue

Some stability issues were reported with these features.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: double free error and freeing uninitialized null pointer

Fix a double free and an uninitialized pointer read error. Both tmp and
new are pointing at same address and both are freed which leads to
double free. Adding a check to verify if new and tmp are free in the
error_free label fixes the double free issue. new is not initialized to
null which also leads to a free on an uninitialized pointer.

Reviewed-by: André Almeida <andrealmeid@igalia.com>
Suggested by: S. Amaranath <Amaranath.Somalapuram@amd.com>
Signed-off-by: Sebin Sebastian <mailmesebin00@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Only disable prefer_shadow on hawaii

We changed it for all asics due to a hibernation regression
on hawaii, but the workaround breaks suspend on a polaris12.
Just disable it for hawaii.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216119
Fixes: 3a4b1cc28fbd ("drm/amdgpu/display: disable prefer_shadow for generic fb helpers")
Reviewed-and-tested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amd/display: set panel orientation before drm_dev_register

To set the panel orientation property with quirk, we need the mode size
provided by EDID. This info is available after EDID is read by dc_link_detect()
and updated by amdgpu_dm_update_connector_after_detect(). The detection
happens at driver load in amdgpu_dm_initialize_drm_device() and,
therefore, we can get modes and set panel orientation before
drm_dev_register() to avoid DRM warns on creating the connector property
after device registration:

[    2.563969] ------------[ cut here ]------------
[    2.563971] WARNING: CPU: 6 PID: 325 at drivers/gpu/drm/drm_mode_object.c:45 drm_mode_object_add+0x72/0x80 [drm]
[    2.563997] Modules linked in: btusb btrtl btbcm btintel btmtk bluetooth rfkill ecdh_generic ecc usbhid crc16 amdgpu(+) drm_ttm_helper ttm agpgart gpu_sched i2c_algo_bit drm_display_helper drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm serio_raw sdhci_pci atkbd libps2 cqhci vivaldi_fmap ccp sdhci i8042 crct10dif_pclmul crc32_pclmul hid_multitouch ghash_clmulni_intel aesni_intel crypto_simd cryptd wdat_wdt mmc_core cec xhci_pci sp5100_tco rng_core xhci_pci_renesas serio 8250_dw i2c_hid_acpi i2c_hid btrfs blake2b_generic libcrc32c crc32c_generic crc32c_intel xor raid6_pq dm_mirror dm_region_hash dm_log dm_mod pkcs8_key_parser crypto_user
[    2.564032] CPU: 6 PID: 325 Comm: systemd-udevd Not tainted 5.18.0-amd-staging-drm-next+ #67
[    2.564034] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0105 03/21/2022
[    2.564036] RIP: 0010:drm_mode_object_add+0x72/0x80 [drm]
[    2.564053] Code: f0 89 c3 85 c0 78 07 89 45 00 44 89 65 04 4c 89 ef e8 e2 99 04 f1 31 c0 85 db 0f 4e c3 5b 5d 41 5c 41 5d c3 80 7f 50 00 74 ac <0f> 0b eb a8 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 54 4c
[    2.564055] RSP: 0018:ffffb2e880413860 EFLAGS: 00010202
[    2.564056] RAX: ffffffffc0ba1440 RBX: ffff99508a860010 RCX: 0000000000000001
[    2.564057] RDX: 00000000b0b0b0b0 RSI: ffff99508c050110 RDI: ffff99508a860010
[    2.564058] RBP: ffff99508c050110 R08: 0000000000000020 R09: ffff99508c292c20
[    2.564059] R10: 0000000000000000 R11: ffff99508c0507d8 R12: 00000000b0b0b0b0
[    2.564060] R13: 0000000000000004 R14: ffffffffc068a4b6 R15: ffffffffc068a47f
[    2.564061] FS:  00007fc69b5f1a40(0000) GS:ffff9953aff80000(0000) knlGS:0000000000000000
[    2.564063] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    2.564063] CR2: 00007f9506804000 CR3: 0000000107f92000 CR4: 0000000000350ee0
[    2.564065] Call Trace:
[    2.564068]  <TASK>
[    2.564070]  drm_property_create+0xc9/0x170 [drm]
[    2.564088]  drm_property_create_enum+0x1f/0x70 [drm]
[    2.564105]  drm_connector_set_panel_orientation_with_quirk+0x96/0xc0 [drm]
[    2.564123]  get_modes+0x4fb/0x530 [amdgpu]
[    2.564378]  drm_helper_probe_single_connector_modes+0x1ad/0x850 [drm_kms_helper]
[    2.564390]  drm_client_modeset_probe+0x229/0x1400 [drm]
[    2.564411]  ? xas_store+0x52/0x5e0
[    2.564416]  ? kmem_cache_alloc_trace+0x177/0x2c0
[    2.564420]  __drm_fb_helper_initial_config_and_unlock+0x44/0x4e0 [drm_kms_helper]
[    2.564430]  drm_fbdev_client_hotplug+0x173/0x210 [drm_kms_helper]
[    2.564438]  drm_fbdev_generic_setup+0xa5/0x166 [drm_kms_helper]
[    2.564446]  amdgpu_pci_probe+0x35e/0x370 [amdgpu]
[    2.564621]  local_pci_probe+0x45/0x80
[    2.564625]  ? pci_match_device+0xd7/0x130
[    2.564627]  pci_device_probe+0xbf/0x220
[    2.564629]  ? sysfs_do_create_link_sd+0x69/0xd0
[    2.564633]  really_probe+0x19c/0x380
[    2.564637]  __driver_probe_device+0xfe/0x180
[    2.564639]  driver_probe_device+0x1e/0x90
[    2.564641]  __driver_attach+0xc0/0x1c0
[    2.564643]  ? __device_attach_driver+0xe0/0xe0
[    2.564644]  ? __device_attach_driver+0xe0/0xe0
[    2.564646]  bus_for_each_dev+0x78/0xc0
[    2.564648]  bus_add_driver+0x149/0x1e0
[    2.564650]  driver_register+0x8f/0xe0
[    2.564652]  ? 0xffffffffc1023000
[    2.564654]  do_one_initcall+0x44/0x200
[    2.564657]  ? kmem_cache_alloc_trace+0x177/0x2c0
[    2.564659]  do_init_module+0x4c/0x250
[    2.564663]  __do_sys_init_module+0x12e/0x1b0
[    2.564666]  do_syscall_64+0x3b/0x90
[    2.564670]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[    2.564673] RIP: 0033:0x7fc69bff232e
[    2.564674] Code: 48 8b 0d 45 0b 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 af 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 12 0b 0c 00 f7 d8 64 89 01 48
[    2.564676] RSP: 002b:00007ffe872ba3e8 EFLAGS: 00000246 ORIG_RAX: 00000000000000af
[    2.564677] RAX: ffffffffffffffda RBX: 000055873f797820 RCX: 00007fc69bff232e
[    2.564678] RDX: 000055873f7bf390 RSI: 0000000001155e81 RDI: 00007fc699e4d010
[    2.564679] RBP: 00007fc699e4d010 R08: 000055873f7bfe20 R09: 0000000001155e90
[    2.564680] R10: 000000055873f7bf R11: 0000000000000246 R12: 000055873f7bf390
[    2.564681] R13: 000000000000000d R14: 000055873f7c4cb0 R15: 000055873f797820
[    2.564683]  </TASK>
[    2.564683] ---[ end trace 0000000000000000 ]---
[    2.564696] ------------[ cut here ]------------
[    2.564696] WARNING: CPU: 6 PID: 325 at drivers/gpu/drm/drm_mode_object.c:242 drm_object_attach_property+0x52/0x80 [drm]
[    2.564717] Modules linked in: btusb btrtl btbcm btintel btmtk bluetooth rfkill ecdh_generic ecc usbhid crc16 amdgpu(+) drm_ttm_helper ttm agpgart gpu_sched i2c_algo_bit drm_display_helper drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm serio_raw sdhci_pci atkbd libps2 cqhci vivaldi_fmap ccp sdhci i8042 crct10dif_pclmul crc32_pclmul hid_multitouch ghash_clmulni_intel aesni_intel crypto_simd cryptd wdat_wdt mmc_core cec xhci_pci sp5100_tco rng_core xhci_pci_renesas serio 8250_dw i2c_hid_acpi i2c_hid btrfs blake2b_generic libcrc32c crc32c_generic crc32c_intel xor raid6_pq dm_mirror dm_region_hash dm_log dm_mod pkcs8_key_parser crypto_user
[    2.564738] CPU: 6 PID: 325 Comm: systemd-udevd Tainted: G        W         5.18.0-amd-staging-drm-next+ #67
[    2.564740] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0105 03/21/2022
[    2.564741] RIP: 0010:drm_object_attach_property+0x52/0x80 [drm]
[    2.564759] Code: 2d 83 f8 18 74 33 48 89 74 c1 08 48 8b 4f 08 48 89 94 c1 c8 00 00 00 48 8b 47 08 83 00 01 c3 4d 85 d2 75 dd 83 7f 58 01 75 d7 <0f> 0b eb d3 41 80 78 50 00 74 cc 0f 0b eb c8 44 89 ce 48 c7 c7 28
[    2.564760] RSP: 0018:ffffb2e8804138d8 EFLAGS: 00010246
[    2.564761] RAX: 0000000000000010 RBX: ffff99508c1a2000 RCX: ffff99508c1a2180
[    2.564762] RDX: 0000000000000003 RSI: ffff99508c050100 RDI: ffff99508c1a2040
[    2.564763] RBP: 00000000ffffffff R08: ffff99508a860010 R09: 00000000c0c0c0c0
[    2.564763] R10: 0000000000000000 R11: 0000000000000020 R12: ffff99508a860010
[    2.564764] R13: ffff995088733008 R14: ffff99508c1a2000 R15: ffffffffc068a47f
[    2.564765] FS:  00007fc69b5f1a40(0000) GS:ffff9953aff80000(0000) knlGS:0000000000000000
[    2.564766] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    2.564767] CR2: 00007f9506804000 CR3: 0000000107f92000 CR4: 0000000000350ee0
[    2.564768] Call Trace:
[    2.564769]  <TASK>
[    2.564770]  drm_connector_set_panel_orientation_with_quirk+0x4a/0xc0 [drm]
[    2.564789]  get_modes+0x4fb/0x530 [amdgpu]
[    2.565024]  drm_helper_probe_single_connector_modes+0x1ad/0x850 [drm_kms_helper]
[    2.565036]  drm_client_modeset_probe+0x229/0x1400 [drm]
[    2.565056]  ? xas_store+0x52/0x5e0
[    2.565060]  ? kmem_cache_alloc_trace+0x177/0x2c0
[    2.565062]  __drm_fb_helper_initial_config_and_unlock+0x44/0x4e0 [drm_kms_helper]
[    2.565072]  drm_fbdev_client_hotplug+0x173/0x210 [drm_kms_helper]
[    2.565080]  drm_fbdev_generic_setup+0xa5/0x166 [drm_kms_helper]
[    2.565088]  amdgpu_pci_probe+0x35e/0x370 [amdgpu]
[    2.565261]  local_pci_probe+0x45/0x80
[    2.565263]  ? pci_match_device+0xd7/0x130
[    2.565265]  pci_device_probe+0xbf/0x220
[    2.565267]  ? sysfs_do_create_link_sd+0x69/0xd0
[    2.565268]  really_probe+0x19c/0x380
[    2.565270]  __driver_probe_device+0xfe/0x180
[    2.565272]  driver_probe_device+0x1e/0x90
[    2.565274]  __driver_attach+0xc0/0x1c0
[    2.565276]  ? __device_attach_driver+0xe0/0xe0
[    2.565278]  ? __device_attach_driver+0xe0/0xe0
[    2.565279]  bus_for_each_dev+0x78/0xc0
[    2.565281]  bus_add_driver+0x149/0x1e0
[    2.565283]  driver_register+0x8f/0xe0
[    2.565285]  ? 0xffffffffc1023000
[    2.565286]  do_one_initcall+0x44/0x200
[    2.565288]  ? kmem_cache_alloc_trace+0x177/0x2c0
[    2.565290]  do_init_module+0x4c/0x250
[    2.565291]  __do_sys_init_module+0x12e/0x1b0
[    2.565294]  do_syscall_64+0x3b/0x90
[    2.565296]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[    2.565297] RIP: 0033:0x7fc69bff232e
[    2.565298] Code: 48 8b 0d 45 0b 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 af 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 12 0b 0c 00 f7 d8 64 89 01 48
[    2.565299] RSP: 002b:00007ffe872ba3e8 EFLAGS: 00000246 ORIG_RAX: 00000000000000af
[    2.565301] RAX: ffffffffffffffda RBX: 000055873f797820 RCX: 00007fc69bff232e
[    2.565302] RDX: 000055873f7bf390 RSI: 0000000001155e81 RDI: 00007fc699e4d010
[    2.565303] RBP: 00007fc699e4d010 R08: 000055873f7bfe20 R09: 0000000001155e90
[    2.565303] R10: 000000055873f7bf R11: 0000000000000246 R12: 000055873f7bf390
[    2.565304] R13: 000000000000000d R14: 000055873f7c4cb0 R15: 000055873f797820
[    2.565306]  </TASK>
[    2.565307] ---[ end trace 0000000000000000 ]---

--

v2:
- call amdgpu_dm_connector_get_modes() instead of ddc_get_modes() (Harry)

Fixes: d77de7880e0e0 ("amd/display: enable panel orientation quirks")
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Fix a potential gpu_metrics_table memory leak

Memory is allocated for gpu_metrics_table in
smu_v13_0_5_init_smc_tables(), but not freed in
smu_v13_0_5_fini_smc_tables(). This may cause memory leaks, fix it.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Zhen Ni <nizhen@uniontech.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Fix a potential gpu_metrics_table memory leak

Memory is allocated for gpu_metrics_table in
smu_v13_0_4_init_smc_tables(), but not freed in
smu_v13_0_4_fini_smc_tables(). This may cause memory leaks, fix it.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Zhen Ni <nizhen@uniontech.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add GFX Power Gating support for GC IP v11.0.1

Add AMD_PG_SUPPORT_GFX_PG support.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable GFX Power Gating for GC IP v11.0.1

Enable GFX Power Gating control for GC IP v11.0.1.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Handle restart of kfd_ioctl_wait_events

When kfd_ioctl_wait_events needs to restart due to a signal, we need to
update the timeout to account for the time already elapsed. We also need
to undo auto_reset of events that have signaled already, so that the
restarted ioctl will be able to count those signals again.

This fixes infinite hangs when kfd_ioctl_wait_events is interrupted by a
signal.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-and-tested-by: Xiaogang Chen <Xiaogang.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Avoid direct cast to amdgpu_ttm_tt

For typesafety, use container_of() instead of implicit cast from struct
ttm_tt to struct amdgpu_ttm_tt.

Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: skip pptable override for smu_v13_0_7

skip pptable override for smu_v13_0_7 secure boards only.

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: add 3715 softpptable support for SMU13.0.0

Add support for 3715 softpptable.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Enable translate_further to extend UTCL2 reach

Enable translate_further on Arcturus and Aldebaran server chips
in order to increase the UTCL2 reach from 8 GiB to 64 GiB,
which is more in line with the amount of framebuffer DRAM in
the devices.

Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Kent Russell <kent.russell@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.197

This version brings along following fixes:

- Move fpu file to dml folder
- Fix CAB allocation for multiple displays
- Add a variable to update FCLK
- Fix TMDS 4K@60Hz YCbCr420 corruption issue
- Fix MPC tree infinite loop in some case
- Fix HDMI VSIF V3 blank screen issue
- Add some documentation to the code
- Allow alternate prefetch modes in DML for DCN32
- Fix VPG instancing for dcn314 HPO
- Check correct bounds for stream encoder instances for DCN303
- Enable SubVP by default on DCN32 & DCN321
- Fix DTBCLK not correct for dcn314
- Fix Compile-time warning
- Fix the stereo mode hang issue
- Fix display light up issue

Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add 16 lines margin for SubVP

[Description]
SUBVP_START_LINE must be aligned to 2 swaths, so add
16 lines of margin so the start line can be adjusted by
up to 16 lines for alignment purposes in FW.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix TDR eDP and USB4 display light up issue

[Why]
After TDR recovery, eDP and USB4 display does not light up. Because
dmub outbox notifications are not enabled after dmub reload and link
encoder assignments for the streams are not cleared before dc state
reset.

[How]
- Dmub outbox notification is enabled after tdr recovery by issuing
  inbox command to dmub.
- Link encoders for the streams are unassigned before dc state reset.

Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: clear optc underflow before turn off odm clock

[Why]
After ODM clock off, optc underflow bit will be kept there always and clear not work.
We need to clear that before clock off.

[How]
Clear that if have when clock off.

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Fudong Wang <Fudong.Wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Don't try to enter MALL SS if stereo3d

[Description]
MALL not supported with stereo3D according
to DCN doc.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: For stereo keep "FLIP_ANY_FRAME"

[Description]
Observed in stereomode that programming FLIP_LEFT_EYE
can cause hangs. Keep FLIP_ANY_FRAME in stereo mode so
the surface flip can take place before left or right eye

Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Revert "attempt to fix the logic in commit_planes_for_stream()"

[Description]
Reverts commit "attempt to fix the logic in commit_planes_for_stream()"
since it caused a regression.

Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Correct DTBCLK for dcn314

[Why]
DTBCLK clocks reset after clocks are initialized
and bounding box values are also incorrect.

[How]
Use dcn31 init clock function programming sequence
and correct bounding box values for dcn314

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Duncan Ma <duncan.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enable SubVP by default on DCN32 & DCN321

[Why&How]
Set the debug options to enable SubVP feature

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Check correct bounds for stream encoder instances for DCN303

[Why & How]
eng_id for DCN303 cannot be more than 1, since we have only two
instances of stream encoders.

Check the correct boundary condition for engine ID for DCN303 prevent
the potential out of bounds access.

Fixes: cd6d421e3d1a ("drm/amd/display: Initial DC support for Beige Goby")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable@vger.kernel.org
Reviewed-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix VPG instancing for dcn314 HPO

[Why]
An issue during VPG indexing offset generation causing
to use the incorrect VPG. HW team placed VPG instances
5 at end of list, making it VPG 9 in register headers.

[How]
Correct VPG instance for HPO encoders.

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Duncan Ma <duncan.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix Compile-time Warning

Fixed bracketing around condition statement.

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: David Galiffi <David.Galiffi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Allow alternate prefetch modes in DML for DCN32

[Why]
Driver is restricting voltage levels if system cannot switch
in vblank.

[How]
Change allow_for_pstate_or_stutter_in_vblank_final from
dm_prefetch_support_uclk_fclk_and_stutter to
dm_prefetch_support_uclk_fclk_and_stutter_if_possible.
Add support for a new registry property,
DalDMLDisallowAlternatePrefetchModes, for easier debugging.

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: David Galiffi <David.Galiffi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix HDMI VSIF V3 incorrect issue

[Why]
Reported from customer the checksum in AMD VSIF V3 is incorrect and
causing blank screen issue.

[How]
Fix the packet length issue on AMD HDMI VSIF V3.

Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Leo Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Avoid MPC infinite loop

[Why]
In some cases MPC tree bottom pipe ends up point to itself.  This causes
iterating from top to bottom to hang the system in an infinite loop.

[How]
When looping to next MPC bottom pipe, check that the pointer is not same
as current to avoid infinite loop.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Device flash garbage before get in OS

[Why]
Enabling stream with tg lock makes config settings
pending causing the garbage until tg unlock.

[How]
Keep the original lock mechanism
The driver doesn't lock tg if plane_state is null.

Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Chiawen Huang <chiawen.huang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix TMDS 4K@60Hz YCbCr420 corruption issue

[Why]
DIG_FIFO_OUTPUT_PIXEL_MODE not being set for dcn314
resulting in incorrect timing for YCbCr4:2:0

[How]
Copy the implementation of set_pixels_per_cycle from dcn32
over to dcn314

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Daniel Miess <Daniel.Miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add a variable to update FCLK latency

[Description]
Add a variable to update FCLK latency

Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix CAB allocation for multiple displays

[Why & How]
When multiple displays are used, the underlying framebuffers could be
two separate framebuffers, or a single large framebuffer. Fix the
calculation logic for CAB to account for large framebuffer. Current
logic assumes that any FB that the plane points to are independent. When
a single FB is used on the system, this does 2 times allocation.

Add a check to prevent duplicate allocation by checking if the base
addresses are the same, and then ensuring that the if we allocate using
the pitch, whole of the other fbs will be accounted for in the first
allocation.

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Drop FPU flags from Makefile

At this point, we isolate the FPU code associated with DCN314 under the
DML folder. This commit drops the FPU flags from the Makefile.

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Move populate dml pipes from DCN314 to dml

The function responsible for populating DML pipes has some FPU
operations, and for this reason, it must be moved to the dml folder.
This commit moves such function from resource to the fpu file under the
dml folder.

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Create FPU files for DCN314

DCN314 has multiple references to FPU operations inside the resource
files, and we need to move those codes to the DML folder. This commit
creates the dcn314_fpu files and moves the bounding box operation to
this file.

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use pixels per container logic for DCN314 DCCG dividers

[Why]
DP DSC YCbCr422 not working because dcn314_calculate_dccg_k1_k2_values
does not account for two pixels per container

[How]
Replace the contents of dcn314_calculate_dccg_k1_k2_values with the
code from the function dcn32_calculate_dccg_k1_k2_values

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Daniel Miess <Daniel.Miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/pm: remove EnableGfxOff message for SMU IP v13.0.4

The EnableGfxOff message is dropped from the new PMFW ppsmc interface.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/pm: update smu driver interface header for SMU IP v13.0.4

Update the SmuMetrics_t defination and SMU driver interface version.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable GFX Clock Gating control for GC IP v11.0.1

Enable GFX CG gate/ungate control.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add GFX Clock Gating support for GC IP v11.0.1

Add below GFX Clock Gating supports:

1. GFX Coarse Grain Clock Gating(CGCG)
2. GFX Coarse grain light sleep/deep sleep(CGLS)
3. GFX Medium Grain Clock Gating(MGCG)
4. GFX Fine Grain Clock Gating(FGCG)
5. Repeater Fine Grain Clock Gating
6. Perfmon Clock Gating

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: change family id name for DCN314

GC version is 11.0.1 rather than 11.0.2

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove redundant reference of header file

Remove redundant reference of header file dev_printk.h

Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Avoid another list of reset devices

A list of devices to be reset is already created in
amdgpu_device_gpu_recover function. Creating another list with the
same nodes is incorrect and not supported in list_head. Instead, pass
the device list as part of reset context.

Fixes: 9e08564727fc (drm/amdgpu: Refactor mode2 reset logic for v13.0.2)
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: include missing headers

Add missing headers to solve the following warnings from sparse:

drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:656:17: warning: symbol 'ddr4_wm_table_gs' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:693:17: warning: symbol 'lpddr4_wm_table_gs' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:730:17: warning: symbol 'lpddr4_wm_table_with_disabled_ppt' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:767:17: warning: symbol 'ddr4_wm_table_rn' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:804:17: warning: symbol 'ddr4_1R_wm_table_rn' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:841:17: warning: symbol 'lpddr4_wm_table_rn' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn301/dcn301_fpu.c:217:17: warning: symbol 'ddr4_wm_table' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn301/dcn301_fpu.c:254:17: warning: symbol 'lpddr5_wm_table' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/dcn31_fpu.c:53:30: warning: symbol 'dcn3_1_ip' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/dcn31_fpu.c:197:30: warning: symbol 'dcn3_15_ip' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/dcn31_fpu.c:293:30: warning: symbol 'dcn3_16_ip' was not declared. Should it be static?

Fixes: 1a3408259bfd ("drm/amd/display: move FPU code on dcn21 clk_mgr")
Fixes: 5085e0361f5a ("drm/amd/display: move FPU code from dcn301 clk mgr to DML folder")
Fixes: 26f4712aedbd ("drm/amd/display: move FPU related code from dcn31 to dml/dcn31 folder")
Fixes: fa896297b31b ("drm/amd/display: move FPU related code from dcn315 to dml/dcn31 folder")
Fixes: 3f8951cc123f ("drm/amd/display: move FPU related code from dcn316 to dml/dcn31 folder")
Signed-off-by: Magali Lemes <magalilemes00@gmail.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: change vram width algorithm for vram_info v3_0

Update the vram width algorithm for vram_info v3_0 to align with the
changes of latest IFWI.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.19.x

drm/amdgpu: Pessimistic availability based on rounded up allocations

Separately accumulate a statistic of rounded up allocations to use
to report availability, with a view to increasing the likelihood a
buffer object can be successfully allocated at exactly the size
reported by the availability API.

Signed-off-by: Daniel Phillips <daniel.phillips@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove rounding from vram allocation path

Rounding up allocations in the allocation path caused test regressions,
so now just round in the availability path.

Signed-off-by: Daniel Phillips <daniel.phillips@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove header from source file

Since "rn_clk_mgr.h" needs ‘struct clk_mgr_internal’ which is declared
in "clk_mgr_internal.h", include "clk_mgr_internal.h" in "rn_clk_mgr.h"
instead of in its source file.
Because of the change above, change the order of '#include
"rn_clk_mgr.h"', so that the necessary structs are visible to
dcn20_clk_mgr.h.

Signed-off-by: Magali Lemes <magalilemes00@gmail.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: make variables static

As "dcn3_1_soc", "dcn3_15_soc", and "dcn3_16_soc" are not used outside
of their corresponding "dcn3*_fpu.c", make them static and remove their
extern declaration.

Fixes: 26f4712aedbd ("drm/amd/display: move FPU related code from dcn31 to dml/dcn31 folder")
Fixes: fa896297b31b ("drm/amd/display: move FPU related code from dcn315 to dml/dcn31 folder")
Fixes: 3f8951cc123f ("drm/amd/display: move FPU related code from dcn316 to dml/dcn31 folder")
Signed-off-by: Magali Lemes <magalilemes00@gmail.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove DML Makefile duplicate lines

There are two identical CFLAGS entries for "display_mode_vba_20.o", so
remove one of them. Also, as there's already an entry for
"display_mode_lib.o" CFLAGS, regardless of CONFIG_DRM_AMD_DC_DCN being
defined or not, remove the one entry between CONFIG_DRM_AMD_DC_DCN ifdef
guards.

Signed-off-by: Magali Lemes <magalilemes00@gmail.com>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd/display: reduce stack for dml32_CalculateSwathAndDETConfiguration"

This reverts commit bac4b41d917a1d999308bb1e779f8c3b39c19f67.

This commit was a part of a patchset responsible for reducing the stack
size. However, after some other changes, this commit becomes
unnecessary, so we are reverting it here.

Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd/display: reduce stack for dml32_CalculateVMRowAndSwath"

This reverts commit c3b3f9ba25e6cbe59673505fbc5fff6c4cda0ef7.

This commit was a part of a patchset responsible for reducing the stack
size. However, after some other changes, this commit becomes
unnecessary, so we are reverting it here.

Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd/display: reduce stack for dml32_CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport"

This reverts commit 3c3abac60117cfd09460980d9a14c253b37f7b00.

This commit was a part of a patchset responsible for reducing the stack
size. However, after some other changes, this commit becomes
unnecessary, so we are reverting it here.

Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd/display: reduce stack for dml32_CalculatePrefetchSchedule"

This reverts commit 86e4863e67a9bd1e257f162f3d740ebb61206c91.

This commit was a part of a patchset responsible for reducing the stack
size. However, after some other changes, this commit becomes
unnecessary, so we are reverting it here.

Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add a missing register field for HPO DP stream encoder

[Why&How]
Add the missing definition to set the register field
HBLANK_MINIMUM_SYMBOL_WIDTH

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'amd-drm-next-5.20-2022-07-29' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-5.20-2022-07-29:

amdgpu:
- Misc spelling and grammar fixes
- DC whitespace cleanups
- ACP smatch fix
- GFX 11.0 updates
- PSP 13.0 updates
- VCN 4.0 updates
- DC FP fix for PPC64
- Misc bug fixes

amdkfd:
- SVM fixes

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220729202742.6636-1-alexander.deucher@amd.com

drm/amd/display: Fix a compilation failure on PowerPC caused by FPU code

We got a report from Stephen/Michael that the PowerPC build was failing
with the following error:

ld: drivers/gpu/drm/amd/display/dc/dml/display_mode_lib.o uses hard float, drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.o uses soft float
ld: failed to merge target specific data of file drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.o

This error happened because of the function optc3_set_vrr_m_const. This
function expects a double as a parameter in a code that is not allowed
to have FPU operations. After further investigation, it became clear
that optc3_set_vrr_m_const was never invoked, so we can safely drop this
function and fix the ld issue.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Melissa Wen <mwen@igalia.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>