alpha: fix alloc_zeroed_user_highpage_movable()

[ Upstream commit f9c668d281aa20e38c9bda3b7b0adeb8891aa15e ]

Due to a typo, the final argument to alloc_page_vma() didn't refer to a
real variable.  This only affected CONFIG_NUMA, which was marked BROKEN in
2006 and removed from alpha in 2021.  Found due to a refactoring patch.

Link: https://lkml.kernel.org/r/20220504182857.4013401-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: PPC: Book3S HV Nested: L2 LPCR should inherit L1 LPES setting

[ Upstream commit 2852ebfa10afdcefff35ec72c8da97141df9845c ]

The L1 should not be able to adjust LPES mode for the L2. Setting LPES
if the L0 needs it clear would cause external interrupts to be sent to
L2 and missed by the L0.

Clearing LPES when it may be set, as typically happens with XIVE enabled
could cause a performance issue despite having no native XIVE support in
the guest, because it will cause mediated interrupts for the L2 to be
taken in HV mode, which then have to be injected.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220303053315.1056880-7-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Avoid pci_dev_lock() AB/BA deadlock with sriov_numvfs_store()

[ Upstream commit a91ee0e9fca9d7501286cfbced9b30a33e52740a ]

The sysfs sriov_numvfs_store() path acquires the device lock before the
config space access lock:

  sriov_numvfs_store
    device_lock                 # A (1) acquire device lock
    sriov_configure
      vfio_pci_sriov_configure  # (for example)
        vfio_pci_core_sriov_configure
          pci_disable_sriov
            sriov_disable
              pci_cfg_access_lock
                pci_wait_cfg    # B (4) wait for dev->block_cfg_access == 0

Previously, pci_dev_lock() acquired the config space access lock before the
device lock:

  pci_dev_lock
    pci_cfg_access_lock
      dev->block_cfg_access = 1 # B (2) set dev->block_cfg_access = 1
    device_lock                 # A (3) wait for device lock

Any path that uses pci_dev_lock(), e.g., pci_reset_function(), may
deadlock with sriov_numvfs_store() if the operations occur in the sequence
(1) (2) (3) (4).

Avoid the deadlock by reversing the order in pci_dev_lock() so it acquires
the device lock before the config space access lock, the same as the
sriov_numvfs_store() path.

[bhelgaas: combined and adapted commit log from Jay Zhou's independent
subsequent posting:
https://lore.kernel.org/r/20220404062539.1710-1-jianjay.zhou@huawei.com]
Link: https://lore.kernel.org/linux-pci/1583489997-17156-1-git-send-email-yangyicong@hisilicon.com/
Also-posted-by: Jay Zhou <jianjay.zhou@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/rtas: Keep MSR[RI] set when calling RTAS

[ Upstream commit b6b1c3ce06ca438eb24e0f45bf0e63ecad0369f5 ]

RTAS runs in real mode (MSR[DR] and MSR[IR] unset) and in 32-bit big
endian mode (MSR[SF,LE] unset).

The change in MSR is done in enter_rtas() in a relatively complex way,
since the MSR value could be hardcoded.

Furthermore, a panic has been reported when hitting the watchdog interrupt
while running in RTAS, this leads to the following stack trace:

  watchdog: CPU 24 Hard LOCKUP
  watchdog: CPU 24 TB:997512652051031, last heartbeat TB:997504470175378 (15980ms ago)
  ...
  Supported: No, Unreleased kernel
  CPU: 24 PID: 87504 Comm: drmgr Kdump: loaded Tainted: G            E  X    5.14.21-150400.71.1.bz196362_2-default #1 SLE15-SP4 (unreleased) 0d821077ef4faa8dfaf370efb5fdca1fa35f4e2c
  NIP:  000000001fb41050 LR: 000000001fb4104c CTR: 0000000000000000
  REGS: c00000000fc33d60 TRAP: 0100   Tainted: G            E  X     (5.14.21-150400.71.1.bz196362_2-default)
  MSR:  8000000002981000 <SF,VEC,VSX,ME>  CR: 48800002  XER: 20040020
  CFAR: 000000000000011c IRQMASK: 1
  GPR00: 0000000000000003 ffffffffffffffff 0000000000000001 00000000000050dc
  GPR04: 000000001ffb6100 0000000000000020 0000000000000001 000000001fb09010
  GPR08: 0000000020000000 0000000000000000 0000000000000000 0000000000000000
  GPR12: 80040000072a40a8 c00000000ff8b680 0000000000000007 0000000000000034
  GPR16: 000000001fbf6e94 000000001fbf6d84 000000001fbd1db0 000000001fb3f008
  GPR20: 000000001fb41018 ffffffffffffffff 000000000000017f fffffffffffff68f
  GPR24: 000000001fb18fe8 000000001fb3e000 000000001fb1adc0 000000001fb1cf40
  GPR28: 000000001fb26000 000000001fb460f0 000000001fb17f18 000000001fb17000
  NIP [000000001fb41050] 0x1fb41050
  LR [000000001fb4104c] 0x1fb4104c
  Call Trace:
  Instruction dump:
  XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
  XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
  Oops: Unrecoverable System Reset, sig: 6 [#1]
  LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
  ...
  Supported: No, Unreleased kernel
  CPU: 24 PID: 87504 Comm: drmgr Kdump: loaded Tainted: G            E  X    5.14.21-150400.71.1.bz196362_2-default #1 SLE15-SP4 (unreleased) 0d821077ef4faa8dfaf370efb5fdca1fa35f4e2c
  NIP:  000000001fb41050 LR: 000000001fb4104c CTR: 0000000000000000
  REGS: c00000000fc33d60 TRAP: 0100   Tainted: G            E  X     (5.14.21-150400.71.1.bz196362_2-default)
  MSR:  8000000002981000 <SF,VEC,VSX,ME>  CR: 48800002  XER: 20040020
  CFAR: 000000000000011c IRQMASK: 1
  GPR00: 0000000000000003 ffffffffffffffff 0000000000000001 00000000000050dc
  GPR04: 000000001ffb6100 0000000000000020 0000000000000001 000000001fb09010
  GPR08: 0000000020000000 0000000000000000 0000000000000000 0000000000000000
  GPR12: 80040000072a40a8 c00000000ff8b680 0000000000000007 0000000000000034
  GPR16: 000000001fbf6e94 000000001fbf6d84 000000001fbd1db0 000000001fb3f008
  GPR20: 000000001fb41018 ffffffffffffffff 000000000000017f fffffffffffff68f
  GPR24: 000000001fb18fe8 000000001fb3e000 000000001fb1adc0 000000001fb1cf40
  GPR28: 000000001fb26000 000000001fb460f0 000000001fb17f18 000000001fb17000
  NIP [000000001fb41050] 0x1fb41050
  LR [000000001fb4104c] 0x1fb4104c
  Call Trace:
  Instruction dump:
  XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
  XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
  ---[ end trace 3ddec07f638c34a2 ]---

This happens because MSR[RI] is unset when entering RTAS but there is no
valid reason to not set it here.

RTAS is expected to be called with MSR[RI] as specified in PAPR+ section
"7.2.1 Machine State":

  R1–7.2.1–9. If called with MSR[RI] equal to 1, then RTAS must protect
  its own critical regions from recursion by setting the MSR[RI] bit to
  0 when in the critical regions.

Fixing this by reviewing the way MSR is compute before calling RTAS. Now a
hardcoded value meaning real mode, 32 bits big endian mode and Recoverable
Interrupt is loaded. In the case MSR[S] is set, it will remain set while
entering RTAS as only urfid can unset it (thanks Fabiano).

In addition a check is added in do_enter_rtas() to detect calls made with
MSR[RI] unset, as we are forcing it on later.

This patch has been tested on the following machines:
Power KVM Guest
  P8 S822L (host Ubuntu kernel 5.11.0-49-generic)
PowerVM LPAR
  P8 9119-MME (FW860.A1)
  p9 9008-22L (FW950.00)
  P10 9080-HEX (FW1010.00)

Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220504101244.12107-1-ldufour@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: Avoid unnecessary frequency updates due to mismatch

[ Upstream commit f55ae08c89873e140c7cac2a7fa161d31a0d60cf ]

For some platforms, the frequency returned by hardware may be slightly
different from what is provided in the frequency table. For example,
hardware may return 499 MHz instead of 500 MHz. In such cases it is
better to avoid getting into unnecessary frequency updates, as we may
end up switching policy->cur between the two and sending unnecessary
pre/post update notifications, etc.

This patch has chosen allows the hardware frequency and table frequency
to deviate by 1 MHz for now, we may want to increase it a bit later on
if someone still complains.

Reported-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Jia-wei Chang <jia-wei.chang@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: hisi: Add missing of_node_put after of_find_compatible_node

[ Upstream commit 9bc72e47d4630d58a840a66a869c56b29554cfe4 ]

of_find_compatible_node  will increment the refcount of the returned
device_node. Calling of_node_put() to avoid the refcount leak

Signed-off-by: Peng Wu <wupeng58@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: exynos: add atmel,24c128 fallback to Samsung EEPROM

[ Upstream commit f038e8186fbc5723d7d38c6fa1d342945107347e ]

The Samsung s524ad0xd1 EEPROM should use atmel,24c128 fallback,
according to the AT24 EEPROM bindings.

Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220426183443.243113-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: versatile: Add missing of_node_put in dcscb_init

[ Upstream commit 23b44f9c649bbef10b45fa33080cd8b4166800ae ]

The device_node pointer is returned by of_find_compatible_node
with refcount incremented. We should use of_node_put() to avoid
the refcount leak.

Signed-off-by: Peng Wu <wupeng58@huawei.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220428230356.69418-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: renesas: rzn1: Fix possible null-ptr-deref in sh_pfc_map_resources()

[ Upstream commit 2f661477c2bb8068194dbba9738d05219f111c6e ]

It will cause null-ptr-deref when using 'res', if platform_get_resource()
returns NULL, so move using 'res' after devm_ioremap_resource() that
will check it to avoid null-ptr-deref.
And use devm_platform_get_and_ioremap_resource() to simplify code.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220429082637.1308182-2-yangyingliang@huawei.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fat: add ratelimit to fat*_ent_bread()

[ Upstream commit 183c3237c928109d2008c0456dff508baf692b20 ]

fat*_ent_bread() can be the cause of too many report on I/O error path.
So use fat_msg_ratelimit() instead.

Link: https://lkml.kernel.org/r/87bkxogfeq.fsf@mail.parknet.co.jp
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reported-by: qianfan <qianfanguijin@163.com>
Tested-by: qianfan <qianfanguijin@163.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/fadump: Fix fadump to work with a different endian capture kernel

[ Upstream commit b74196af372f7cb4902179009265fe63ac81824f ]

Dump capture would fail if capture kernel is not of the endianess as the
production kernel, because the in-memory data structure (struct
opal_fadump_mem_struct) shared across production kernel and capture
kernel assumes the same endianess for both the kernels, which doesn't
have to be true always. Fix it by having a well-defined endianess for
struct opal_fadump_mem_struct.

Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/161902744901.86147.14719228311655123526.stgit@hbathini
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: OMAP1: clock: Fix UART rate reporting algorithm

[ Upstream commit 338d5d476cde853dfd97378d20496baabc2ce3c0 ]

Since its introduction to the mainline kernel, omap1_uart_recalc() helper
makes incorrect use of clk->enable_bit as a ready to use bitmap mask while
it only provides the bit number.  Fix it.

Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: usb-audio: Move generic implicit fb quirk entries into quirks.c

[ Upstream commit 67d64069bc0867e52e73a1e255b17462005ca9b4 ]

Use the new quirk bits to manage the generic implicit fb quirk
entries.  This makes easier to compare with other devices.

Link: https://lore.kernel.org/r/20220421064101.12456-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: usb-audio: Add quirk bits for enabling/disabling generic implicit fb

[ Upstream commit 0f1f7a6661394fe4a53db254c346d6aa2dd64397 ]

For making easier to test, add the new quirk_flags bits 17 and 18 to
enable and disable the generic implicit feedback mode.  The bit 17 is
equivalent with implicit_fb=1 option, applying the generic implicit
feedback sync mode.  OTOH, the bit 18 disables the implicit fb mode
forcibly.

Link: https://lore.kernel.org/r/20220421064101.12456-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sdm845-xiaomi-beryllium: fix typo in panel's vddio-supply property

[ Upstream commit 1f1c494082a1f10d03ce4ee1485ee96d212e22ff ]

vddio is misspelled with a "0" instead of "o". Fix it.

Signed-off-by: Joel Selvaraj <jo@jsfamily.in>
Reviewed-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/BY5PR02MB7009901651E6A8D5ACB0425ED91F9@BY5PR02MB7009.namprd02.prod.outlook.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs: jfs: fix possible NULL pointer dereference in dbFree()

[ Upstream commit 0d4837fdb796f99369cf7691d33de1b856bcaf1f ]

In our fault-injection testing, the variable "nblocks" in dbFree() can be
zero when kmalloc_array() fails in dtSearch(). In this case, the variable
 "mp" in dbFree() would be NULL and then it is dereferenced in
"write_metapage(mp)".

The failure log is listed as follows:

[   13.824137] BUG: kernel NULL pointer dereference, address: 0000000000000020
...
[   13.827416] RIP: 0010:dbFree+0x5f7/0x910 [jfs]
[   13.834341] Call Trace:
[   13.834540]  <TASK>
[   13.834713]  txFreeMap+0x7b4/0xb10 [jfs]
[   13.835038]  txUpdateMap+0x311/0x650 [jfs]
[   13.835375]  jfs_lazycommit+0x5f2/0xc70 [jfs]
[   13.835726]  ? sched_dynamic_update+0x1b0/0x1b0
[   13.836092]  kthread+0x3c2/0x4a0
[   13.836355]  ? txLockFree+0x160/0x160 [jfs]
[   13.836763]  ? kthread_unuse_mm+0x160/0x160
[   13.837106]  ret_from_fork+0x1f/0x30
[   13.837402]  </TASK>
...

This patch adds a NULL check of "mp" before "write_metapage(mp)" is called.

Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Zixuan Fu <r33s3n6@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: ti: ti_sci_pm_domains: Check for null return of devm_kcalloc

[ Upstream commit ba56291e297d28aa6eb82c5c1964fae2d7594746 ]

The allocation funciton devm_kcalloc may fail and return a null pointer,
which would cause a null-pointer dereference later.
It might be better to check it and directly return -ENOMEM just like the
usage of devm_kcalloc in previous code.

Signed-off-by: QintaoShen <unSimple1993@163.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/1648107843-29077-1-git-send-email-unSimple1993@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: ccree - use fine grained DMA mapping dir

[ Upstream commit a260436c98171cd825955a84a7f6e62bc8f4f00d ]

Use a fine grained specification of DMA mapping directions
in certain cases, allowing both a more optimized operation
as well as shushing out a harmless, though persky
dma-debug warning.

Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PM / devfreq: rk3399_dmc: Disable edev on remove()

[ Upstream commit 2fccf9e6050e0e3b8b4cd275d41daf7f7fa22804 ]

Otherwise we hit an unablanced enable-count when unbinding the DFI
device:

[ 1279.659119] ------------[ cut here ]------------
[ 1279.659179] WARNING: CPU: 2 PID: 5638 at drivers/devfreq/devfreq-event.c:360 devfreq_event_remove_edev+0x84/0x8c
...
[ 1279.659352] Hardware name: Google Kevin (DT)
[ 1279.659363] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO BTYPE=--)
[ 1279.659371] pc : devfreq_event_remove_edev+0x84/0x8c
[ 1279.659380] lr : devm_devfreq_event_release+0x1c/0x28
...
[ 1279.659571] Call trace:
[ 1279.659582]  devfreq_event_remove_edev+0x84/0x8c
[ 1279.659590]  devm_devfreq_event_release+0x1c/0x28
[ 1279.659602]  release_nodes+0x1cc/0x244
[ 1279.659611]  devres_release_all+0x44/0x60
[ 1279.659621]  device_release_driver_internal+0x11c/0x1ac
[ 1279.659629]  device_driver_detach+0x20/0x2c
[ 1279.659641]  unbind_store+0x7c/0xb0
[ 1279.659650]  drv_attr_store+0x2c/0x40
[ 1279.659663]  sysfs_kf_write+0x44/0x58
[ 1279.659672]  kernfs_fop_write_iter+0xf4/0x190
[ 1279.659684]  vfs_write+0x2b0/0x2e4
[ 1279.659693]  ksys_write+0x80/0xec
[ 1279.659701]  __arm64_sys_write+0x24/0x30
[ 1279.659714]  el0_svc_common+0xf0/0x1d8
[ 1279.659724]  do_el0_svc_compat+0x28/0x3c
[ 1279.659738]  el0_svc_compat+0x10/0x1c
[ 1279.659746]  el0_sync_compat_handler+0xa8/0xcc
[ 1279.659758]  el0_sync_compat+0x188/0x1c0
[ 1279.659768] ---[ end trace cec200e5094155b4 ]---

Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: msm8994: Fix BLSP[12]_DMA channels count

[ Upstream commit 1ae438d26b620979ed004d559c304d31c42173ae ]

MSM8994 actually features 24 DMA channels for each BLSP,
fix it!

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220319174645.340379-14-konrad.dybcio@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: msm8994: Fix the cont_splash_mem address

[ Upstream commit 049c46f31a726bf8d202ff1681661513447fac84 ]

The default memory map places cont_splash_mem at 3401000, which was
overlooked.. Fix it!

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220319174645.340379-9-konrad.dybcio@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: s5pv210: align DMA channels with dtschema

[ Upstream commit 9e916fb9bc3d16066286f19fc9c51d26a6aec6bd ]

dtschema expects DMA channels in specific order (tx, rx and tx-sec).
The order actually should not matter because dma-names is used however
let's make it aligned with dtschema to suppress warnings like:

  i2s@eee30000: dma-names: ['rx', 'tx', 'tx-sec'] is not valid under any of the given schemas

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Co-developed-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Link: https://lore.kernel.org/r/CY4PR04MB056779A9C50DC95987C5272ACB1C9@CY4PR04MB0567.namprd04.prod.outlook.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: socfpga: align interrupt controller node name with dtschema

[ Upstream commit c9bdd50d2019f78bf4c1f6a79254c27771901023 ]

Fixes dtbs_check warnings like:

  $nodename:0: 'intc@fffed000' does not match '^interrupt-controller(@[0-9a-f,]+)*$'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20220317115705.450427-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: ox820: align interrupt controller node name with dtschema

[ Upstream commit fbcd5ad7a419ad40644a0bb8b4152bc660172d8a ]

Fixes dtbs_check warnings like:

  gic@1000: $nodename:0: 'gic@1000' does not match '^interrupt-controller(@[0-9a-f,]+)*$'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220317115705.450427-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/rdmavt: add missing locks in rvt_ruc_loopback

[ Upstream commit 22cbc6c2681a0a4fe76150270426e763d52353a4 ]

The documentation of the function rvt_error_qp says both r_lock and
s_lock need to be held when calling that function.
It also asserts using lockdep that both of those locks are held.
rvt_error_qp is called form rvt_send_cq, which is called from
rvt_qp_complete_swqe, which is called from rvt_send_complete, which is
called from rvt_ruc_loopback in two places. Both of these places do not
hold r_lock. Fix this by acquiring a spin_lock of r_lock in both of
these places.
The r_lock acquiring cannot be added in rvt_qp_complete_swqe because
some of its other callers already have r_lock acquired.

Link: https://lore.kernel.org/r/20220228195144.71946-1-dossche.niels@gmail.com
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: target: tcmu: Avoid holding XArray lock when calling lock_page

[ Upstream commit 325d5c5fb216674296f3902a8902b942da3adc5b ]

In tcmu_blocks_release(), lock_page() is called to prevent a race causing
possible data corruption. Since lock_page() might sleep, calling it while
holding XArray lock is a bug.

To fix this, replace the xas_for_each() call with xa_for_each_range().
Since the latter does its own handling of XArray locking, the xas_lock()
and xas_unlock() calls around the original loop are no longer necessary.

The switch to xa_for_each_range() slows down the loop slightly. This is
acceptable since tcmu_blocks_release() is not relevant for performance.

Link: https://lore.kernel.org/r/20220517192913.21405-1-bostroesser@gmail.com
Fixes: bb9b9eb0ae2e ("scsi: target: tcmu: Fix possible data corruption")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gfs2: use i_lock spin_lock for inode qadata

[ Upstream commit 5fcff61eea9efd1f4b60e89d2d686b5feaea100f ]

Before this patch, functions gfs2_qa_get and _put used the i_rw_mutex to
prevent simultaneous access to its i_qadata. But i_rw_mutex is now used
for many other things, including iomap_begin and end, which causes a
conflict according to lockdep. We cannot just remove the lock since
simultaneous opens (gfs2_open -> gfs2_open_common -> gfs2_qa_get) can
then stomp on each others values for i_qadata.

This patch solves the conflict by using the i_lock spin_lock in the inode
to prevent simultaneous access.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: fix btf_dump/btf_dump due to recent clang change

[ Upstream commit 4050764cbaa25760aab40857f723393c07898474 ]

Latest llvm-project upstream had a change of behavior
related to qualifiers on function return type ([1]).
This caused selftests btf_dump/btf_dump failure.
The following example shows what changed.

  $ cat t.c
  typedef const char * const (* const (* const fn_ptr_arr2_t[5])())(char * (*)(int));
  struct t {
    int a;
    fn_ptr_arr2_t l;
  };
  int foo(struct t *arg) {
    return arg->a;
  }

Compiled with latest upstream llvm15,
  $ clang -O2 -g -target bpf -S -emit-llvm t.c
The related generated debuginfo IR looks like:
  !16 = !DIDerivedType(tag: DW_TAG_typedef, name: "fn_ptr_arr2_t", file: !1, line: 1, baseType: !17)
  !17 = !DICompositeType(tag: DW_TAG_array_type, baseType: !18, size: 320, elements: !32)
  !18 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !19)
  !19 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !20, size: 64)
  !20 = !DISubroutineType(types: !21)
  !21 = !{!22, null}
  !22 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !23, size: 64)
  !23 = !DISubroutineType(types: !24)
  !24 = !{!25, !28}
  !25 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !26, size: 64)
  !26 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !27)
  !27 = !DIBasicType(name: "char", size: 8, encoding: DW_ATE_signed_char)
You can see two intermediate const qualifier to pointer are dropped in debuginfo IR.

With llvm14, we have following debuginfo IR:
  !16 = !DIDerivedType(tag: DW_TAG_typedef, name: "fn_ptr_arr2_t", file: !1, line: 1, baseType: !17)
  !17 = !DICompositeType(tag: DW_TAG_array_type, baseType: !18, size: 320, elements: !34)
  !18 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !19)
  !19 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !20, size: 64)
  !20 = !DISubroutineType(types: !21)
  !21 = !{!22, null}
  !22 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !23)
  !23 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !24, size: 64)
  !24 = !DISubroutineType(types: !25)
  !25 = !{!26, !30}
  !26 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !27)
  !27 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !28, size: 64)
  !28 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !29)
  !29 = !DIBasicType(name: "char", size: 8, encoding: DW_ATE_signed_char)
All const qualifiers are preserved.

To adapt the selftest to both old and new llvm, this patch removed
the intermediate const qualifier in const-to-ptr types, to make the
test succeed again.

  [1] https://reviews.llvm.org/D125919

Reported-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220523152044.3905809-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

char: tpm: cr50_i2c: Suppress duplicated error message in .remove()

[ Upstream commit e0687fe958f763f1790f22ed5483025b7624e744 ]

Returning an error value in an i2c remove callback results in an error
message being emitted by the i2c core, but otherwise it doesn't make a
difference. The device goes away anyhow and the devm cleanups are
called.

As tpm_cr50_i2c_remove() emits an error message already and the
additional error message by the i2c core doesn't add any useful
information, change the return value to zero to suppress this error
message.

Note that if i2c_clientdata is NULL, there is something really fishy.
Assuming no memory corruption happened (then all bets are lost anyhow),
tpm_cr50_i2c_remove() is only called after tpm_cr50_i2c_probe() returned
successfully. So there was a tpm chip registered before and after
tpm_cr50_i2c_remove() its privdata is freed but the associated character
device isn't removed. If after that happened userspace accesses the
character device it's likely that the freed memory is accessed. For that
reason the warning message is made a bit more frightening.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

eth: tg3: silence the GCC 12 array-bounds warning

[ Upstream commit 9dec850fd7c210a04b4707df8e6c95bfafdd6a4b ]

GCC 12 currently generates a rather inconsistent warning:

drivers/net/ethernet/broadcom/tg3.c:17795:51: warning: array subscript 5 is above array bounds of ‘struct tg3_napi[5]’ [-Warray-bounds]
17795 |                 struct tg3_napi *tnapi = &tp->napi[i];
      |                                           ~~~~~~~~^~~

i is guaranteed < tp->irq_max which in turn is either 1 or 5.
There are more loops like this one in the driver, but strangely
GCC 12 dislikes only this single one.

Silence this silliness for now.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

afs: Adjust ACK interpretation to try and cope with NAT

[ Upstream commit adc9613ff66c26ebaff9814973181ac178beb90b ]

If a client's address changes, say if it is NAT'd, this can disrupt an in
progress operation.  For most operations, this is not much of a problem,
but StoreData can be different as some servers modify the target file as
the data comes in, so if a store request is disrupted, the file can get
corrupted on the server.

The problem is that the server doesn't recognise packets that come after
the change of address as belonging to the original client and will bounce
them, either by sending an OUT_OF_SEQUENCE ACK to the apparent new call if
the packet number falls within the initial sequence number window of a call
or by sending an EXCEEDS_WINDOW ACK if it falls outside and then aborting
it.  In both cases, firstPacket will be 1 and previousPacket will be 0 in
the ACK information.

Fix this by the following means:

 (1) If a client call receives an EXCEEDS_WINDOW ACK with firstPacket as 1
     and previousPacket as 0, assume this indicates that the server saw the
     incoming packets from a different peer and thus as a different call.
     Fail the call with error -ENETRESET.

 (2) Also fail the call if a similar OUT_OF_SEQUENCE ACK occurs if the
     first packet has been hard-ACK'd.  If it hasn't been hard-ACK'd, the
     ACK packet will cause it to get retransmitted, so the call will just
     be repeated.

 (3) Make afs_select_fileserver() treat -ENETRESET as a straight fail of
     the operation.

 (4) Prioritise the error code over things like -ECONNRESET as the server
     did actually respond.

 (5) Make writeback treat -ENETRESET as a retryable error and make it
     redirty all the pages involved in a write so that the VM will retry.

Note that there is still a circumstance that I can't easily deal with: if
the operation is fully received and processed by the server, but the reply
is lost due to address change.  There's no way to know if the op happened.
We can examine the server, but a conflicting change could have been made by
a third party - and we can't tell the difference.  In such a case, a
message like:

    kAFS: vnode modified {100058:146266} b7->b8 YFS.StoreData64 (op=2646a)

will be logged to dmesg on the next op to touch the file and the client
will reset the inode state, including invalidating clean parts of the
pagecache.

Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Link: http://lists.infradead.org/pipermail/linux-afs/2021-December/004811.html
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rxrpc, afs: Fix selection of abort codes

[ Upstream commit de696c4784f0706884458893c5a6c39b3a3ff65c ]

The RX_USER_ABORT code should really only be used to indicate that the user
of the rxrpc service (ie. userspace) implicitly caused a call to be aborted
- for instance if the AF_RXRPC socket is closed whilst the call was in
progress.  (The user may also explicitly abort a call and specify the abort
code to use).

Change some of the points of generation to use other abort codes instead:

 (1) Abort the call with RXGEN_SS_UNMARSHAL or RXGEN_CC_UNMARSHAL if we see
     ENOMEM and EFAULT during received data delivery and abort with
     RX_CALL_DEAD in the default case.

 (2) Abort with RXGEN_SS_MARSHAL if we get ENOMEM whilst trying to send a
     reply.

 (3) Abort with RX_CALL_DEAD if we stop hearing from the peer if we had
     heard from the peer and abort with RX_CALL_TIMEOUT if we hadn't.

 (4) Abort with RX_CALL_DEAD if we try to disconnect a call that's not
     completed successfully or been aborted.

Reported-by: Jeffrey Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rxrpc: Return an error to sendmsg if call failed

[ Upstream commit 4ba68c5192554876bd8c3afd904e3064d2915341 ]

If at the end of rxrpc sendmsg() or rxrpc_kernel_send_data() the call that
was being given data was aborted remotely or otherwise failed, return an
error rather than returning the amount of data buffered for transmission.

The call (presumably) did not complete, so there's not much point
continuing with it.  AF_RXRPC considers it "complete" and so will be
unwilling to do anything else with it - and won't send a notification for
it, deeming the return from sendmsg sufficient.

Not returning an error causes afs to incorrectly handle a StoreData
operation that gets interrupted by a change of address due to NAT
reconfiguration.

This doesn't normally affect most operations since their request parameters
tend to fit into a single UDP packet and afs_make_call() returns before the
server responds; StoreData is different as it involves transmission of a
lot of data.

This can be triggered on a client by doing something like:

dd if=/dev/zero of=/afs/example.com/foo bs=1M count=512

at one prompt, and then changing the network address at another prompt,
e.g.:

ifconfig enp6s0 inet 192.168.6.2 && route add 192.168.6.1 dev enp6s0

Tracing packets on an Auristor fileserver looks something like:

192.168.6.1 -> 192.168.6.3  RX 107 ACK Idle  Seq: 0  Call: 4  Source Port: 7000  Destination Port: 7001
192.168.6.3 -> 192.168.6.1  AFS (RX) 1482 FS Request: Unknown(64538) (64538)
192.168.6.3 -> 192.168.6.1  AFS (RX) 1482 FS Request: Unknown(64538) (64538)
192.168.6.1 -> 192.168.6.3  RX 107 ACK Idle  Seq: 0  Call: 4  Source Port: 7000  Destination Port: 7001
<ARP exchange for 192.168.6.2>
192.168.6.2 -> 192.168.6.1  AFS (RX) 1482 FS Request: Unknown(0) (0)
192.168.6.2 -> 192.168.6.1  AFS (RX) 1482 FS Request: Unknown(0) (0)
192.168.6.1 -> 192.168.6.2  RX 107 ACK Exceeds Window  Seq: 0  Call: 4  Source Port: 7000  Destination Port: 7001
192.168.6.1 -> 192.168.6.2  RX 74 ABORT  Seq: 0  Call: 4  Source Port: 7000  Destination Port: 7001
192.168.6.1 -> 192.168.6.2  RX 74 ABORT  Seq: 29321  Call: 4  Source Port: 7000  Destination Port: 7001

The Auristor fileserver logs code -453 (RXGEN_SS_UNMARSHAL), but the abort
code received by kafs is -5 (RX_PROTOCOL_ERROR) as the rx layer sees the
condition and generates an abort first and the unmarshal error is a
consequence of that at the application layer.

Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Link: http://lists.infradead.org/pipermail/linux-afs/2021-December/004810.html
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

m68k: atari: Make Atari ROM port I/O write macros return void

[ Upstream commit 30b5e6ef4a32ea4985b99200e06d6660a69f9246 ]

The macros implementing Atari ROM port I/O writes do not cast away their
output, unlike similar implementations for other I/O buses.
When they are combined using conditional expressions in the definitions of
outb() and friends, this triggers sparse warnings like:

    drivers/net/appletalk/cops.c:382:17: error: incompatible types in conditional expression (different base types):
    drivers/net/appletalk/cops.c:382:17:    unsigned char
    drivers/net/appletalk/cops.c:382:17:    void

Fix this by adding casts to "void".

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Link: https://lore.kernel.org/r/c15bedc83d90a14fffcd5b1b6bfb32b8a80282c5.1653057096.git.geert@linux-m68k.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ipa: ignore endianness if there is no header

[ Upstream commit 332ef7c814bdd60f08d0d9013d0e1104798b2d23 ]

If we program an RX endpoint to have no header (header length is 0),
header-related endpoint configuration values are meaningless and are
ignored.

The only case we support that defines a header is QMAP endpoints.
In ipa_endpoint_init_hdr_ext() we set the endianness mask value
unconditionally, but it should not be done if there is no header
(meaning it is not configured for QMAP).

Set the endianness conditionally, and rearrange the logic in that
function slightly to avoid testing the qmap flag twice.

Delete an incorrect comment in ipa_endpoint_init_aggr().

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/microcode: Add explicit CPU vendor dependency

[ Upstream commit 9c55d99e099bd7aa6b91fce8718505c35d5dfc65 ]

Add an explicit dependency to the respective CPU vendor so that the
respective microcode support for it gets built only when that support is
enabled.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/8ead0da9-9545-b10d-e3db-7df1a1f219e4@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: mcp251xfd: silence clang's -Wunaligned-access warning

[ Upstream commit 1a6dd9996699889313327be03981716a8337656b ]

clang emits a -Wunaligned-access warning on union
mcp251xfd_tx_ojb_load_buf.

The reason is that field hw_tx_obj (not declared as packed) is being
packed right after a 16 bits field inside a packed struct:

| union mcp251xfd_tx_obj_load_buf {
|  struct __packed {
|  struct mcp251xfd_buf_cmd cmd;
|    /* ^ 16 bits fields */
|  struct mcp251xfd_hw_tx_obj_raw hw_tx_obj;
|    /* ^ not declared as packed */
|  } nocrc;
|  struct __packed {
|  struct mcp251xfd_buf_cmd_crc cmd;
|  struct mcp251xfd_hw_tx_obj_raw hw_tx_obj;
|  __be16 crc;
|  } crc;
| } ____cacheline_aligned;

Starting from LLVM 14, having an unpacked struct nested in a packed
struct triggers a warning. c.f. [1].

This is a false positive because the field is always being accessed
with the relevant put_unaligned_*() function. Adding __packed to the
structure declaration silences the warning.

[1] https://github.com/llvm/llvm-project/issues/55520

Link: https://lore.kernel.org/all/20220518114357.55452-1-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Nathan Chancellor <nathan@kernel.org> # build
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme: set non-mdts limits in nvme_scan_work

[ Upstream commit 78288665b5d0154978fed431985310cb4f166836 ]

In current implementation we set the non-mdts limits by calling
nvme_init_non_mdts_limits() from nvme_init_ctrl_finish().
This also tries to set the limits for the discovery controller which
has no I/O queues resulting in the warning message reported by the
nvme_log_error() when running blktest nvme/002: -

[ 2005.155946] run blktests nvme/002 at 2022-04-09 16:57:47
[ 2005.192223] loop: module loaded
[ 2005.196429] nvmet: adding nsid 1 to subsystem blktests-subsystem-0
[ 2005.200334] nvmet: adding nsid 1 to subsystem blktests-subsystem-1

<------------------------------SNIP---------------------------------->

[ 2008.958108] nvmet: adding nsid 1 to subsystem blktests-subsystem-997
[ 2008.962082] nvmet: adding nsid 1 to subsystem blktests-subsystem-998
[ 2008.966102] nvmet: adding nsid 1 to subsystem blktests-subsystem-999
[ 2008.973132] nvmet: creating discovery controller 1 for subsystem nqn.2014-08.org.nvmexpress.discovery for NQN testhostnqn.
*[ 2008.973196] nvme1: Identify(0x6), Invalid Field in Command (sct 0x0 / sc 0x2) MORE DNR*
[ 2008.974595] nvme nvme1: new ctrl: "nqn.2014-08.org.nvmexpress.discovery"
[ 2009.103248] nvme nvme1: Removing ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery"

Move the call of nvme_init_non_mdts_limits() to nvme_scan_work() after
we verify that I/O queues are created since that is a converging point
for each transport where these limits are actually used.

1. FC :
nvme_fc_create_association()
 ...
 nvme_fc_create_io_queues(ctrl);
 ...
 nvme_start_ctrl()
  nvme_scan_queue()
   nvme_scan_work()

2. PCIe:-
nvme_reset_work()
 ...
 nvme_setup_io_queues()
  nvme_create_io_queues()
   nvme_alloc_queue()
 ...
 nvme_start_ctrl()
  nvme_scan_queue()
   nvme_scan_work()

3. RDMA :-
nvme_rdma_setup_ctrl
 ...
  nvme_rdma_configure_io_queues
  ...
  nvme_start_ctrl()
   nvme_scan_queue()
    nvme_scan_work()

4. TCP :-
nvme_tcp_setup_ctrl
 ...
  nvme_tcp_configure_io_queues
  ...
  nvme_start_ctrl()
   nvme_scan_queue()
    nvme_scan_work()

* nvme_scan_work()
...
nvme_validate_or_alloc_ns()
  nvme_alloc_ns()
   nvme_update_ns_info()
    nvme_update_disk_info()
     nvme_config_discard() <---
     blk_queue_max_write_zeroes_sectors() <---

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: CPPC: Assume no transition latency if no PCCT

[ Upstream commit 6380b7b2b29da9d9c5ab2d4a265901cd93ba3696 ]

The transition_delay_us (struct cpufreq_policy) is currently defined
as:
  Preferred average time interval between consecutive invocations of
  the driver to set the frequency for this policy.  To be set by the
  scaling driver (0, which is the default, means no preference).
The transition_latency represents the amount of time necessary for a
CPU to change its frequency.

A PCCT table advertises mutliple values:
- pcc_nominal: Expected latency to process a command, in microseconds
- pcc_mpar: The maximum number of periodic requests that the subspace
  channel can support, reported in commands per minute. 0 indicates no
  limitation.
- pcc_mrtt: The minimum amount of time that OSPM must wait after the
  completion of a command before issuing the next command,
  in microseconds.
cppc_get_transition_latency() allows to get the max of them.

commit d4f3388afd48 ("cpufreq / CPPC: Set platform specific
transition_delay_us") allows to select transition_delay_us based on
the platform, and fallbacks to cppc_get_transition_latency()
otherwise.

If _CPC objects are not using PCC channels (no PPCT table), the
transition_delay_us is set to CPUFREQ_ETERNAL, leading to really long
periods between frequency updates (~4s).

If the desired_reg, where performance requests are written, is in
SystemMemory or SystemIo ACPI address space, there is no delay
in requests. So return 0 instead of CPUFREQ_ETERNAL, leading to
transition_delay_us being set to LATENCY_MULTIPLIER us (1000 us).

This patch also adds two macros to check the address spaces.

Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: rt1015p: remove dependency on GPIOLIB

[ Upstream commit b390c25c6757b9d56cecdfbf6d55f15fc89a6386 ]

commit dcc2c012c7691 ("ASoC: Fix gpiolib dependencies") removed a
series of unnecessary dependencies on GPIOLIB when the gpio was
optional.

A similar simplification seems valid for rt1015p, so remove the
dependency as well. This will avoid the following warning

  WARNING: unmet direct dependencies detected for SND_SOC_RT1015P

     Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] &&
     GPIOLIB [=n]

     Selected by [y]:

     - SND_SOC_INTEL_SOF_RT5682_MACH [=y] && SOUND [=y] && !UML && SND
       [=y] && SND_SOC [=y] && SND_SOC_INTEL_MACH [=y] &&
       (SND_SOC_SOF_HDA_LINK [=y] || SND_SOC_SOF_BAYTRAIL [=n]) && I2C
       [=y] && ACPI [=y] && (SND_HDA_CODEC_HDMI [=y] &&
       SND_SOC_SOF_HDA_AUDIO_CODEC [=y] && (MFD_INTEL_LPSS [=y] ||
       COMPILE_TEST [=y]) || SND_SOC_SOF_BAYTRAIL [=n] &&
       (X86_INTEL_LPSS [=n] || COMPILE_TEST [=y]))

Reported-by: kernel test robot <yujie.liu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220517172647.468244-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: max98357a: remove dependency on GPIOLIB

[ Upstream commit 21ca3274333f5c1cbbf9d91e5b33f4f2463859b2 ]

commit dcc2c012c7691 ("ASoC: Fix gpiolib dependencies") removed a
series of unnecessary dependencies on GPIOLIB when the gpio was
optional.

A similar simplification seems valid for max98357a, so remove the
dependency as well. This will avoid the following warning

   WARNING: unmet direct dependencies detected for SND_SOC_MAX98357A
     Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && GPIOLIB [=n]
     Selected by [y]:
     - SND_SOC_INTEL_SOF_CS42L42_MACH [=y] && SOUND [=y] && !UML &&
       SND [=y] && SND_SOC [=y] && SND_SOC_INTEL_MACH [=y] &&
       (SND_SOC_SOF_HDA_LINK [=y] || SND_SOC_SOF_BAYTRAIL [=n]) && I2C
       [=y] && ACPI [=y] && SND_HDA_CODEC_HDMI [=y] &&
       SND_SOC_SOF_HDA_AUDIO_CODEC [=y] && (MFD_INTEL_LPSS [=y] ||
       COMPILE_TEST [=n])

Reported-by: kernel test robot <yujie.liu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220517172647.468244-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: hantro: Stop using H.264 parameter pic_num

[ Upstream commit 831410700909f4e29d5af1ef26b8c59fc2d1988e ]

The hardware expects FrameNumWrap or long_term_frame_idx. Picture
numbers are per field, and are mostly used during the memory
management process, which is done in userland. This fixes two
ITU conformance tests:

  - MR6_BT_B
  - MR8_BT_B

Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: exynos4-is: Fix compile warning

[ Upstream commit e080f5c1f2b6d02c02ee5d674e0e392ccf63bbaf ]

Declare static on function 'fimc_isp_video_device_unregister'.

When VIDEO_EXYNOS4_ISP_DMA_CAPTURE=n, compiler warns about
warning: no previous prototype for function [-Wmissing-prototypes]

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Kwanghoon Son <k.son@samsung.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: micrel: Allow probing without .driver_data

[ Upstream commit f2ef6f7539c68c6bd6c32323d8845ee102b7c450 ]

Currently, if the .probe element is present in the phy_driver structure
and the .driver_data is not, a NULL pointer dereference happens.

Allow passing .probe without .driver_data by inserting NULL checks
for priv->type.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220513114613.762810-1-festevam@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/pm: update smartshift powerboost calc for smu13

[ Upstream commit cdf4c8ec39872a61a58d62f19b4db80f0f7bc586 ]

smartshift apu and dgpu power boost are reported as percentage
with respect to their power limits. adjust the units of power before
calculating the percentage of boost.

Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/pm: update smartshift powerboost calc for smu12

[ Upstream commit 138292f1dc00e7e0724f44769f9da39cf2f3bf0b ]

smartshift apu and dgpu power boost are reported as percentage with
respect to their power limits. This value[0-100] reflects the boost
for the respective device.

Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nbd: Fix hung on disconnect request if socket is closed before

[ Upstream commit 491bf8f236fdeec698fa6744993f1ecf3fafd1a5 ]

When userspace closes the socket before sending a disconnect
request, the following I/O requests will be blocked in
wait_for_reconnect() until dead timeout. This will cause the
following disconnect request also hung on blk_mq_quiesce_queue().
That means we have no way to disconnect a nbd device if there
are some I/O requests waiting for reconnecting until dead timeout.
It's not expected. So let's wake up the thread waiting for
reconnecting directly when a disconnect request is sent.

Reported-by: Xu Jianhai <zero.xu@bytedance.com>
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20220322080639.142-1-xieyongji@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: rt5645: Fix errorenous cleanup order

[ Upstream commit 2def44d3aec59e38d2701c568d65540783f90f2f ]

There is a logic error when removing rt5645 device as the function
rt5645_i2c_remove() first cancel the &rt5645->jack_detect_work and
delete the &rt5645->btn_check_timer latter. However, since the timer
handler rt5645_btn_check_callback() will re-queue the jack_detect_work,
this cleanup order is buggy.

That is, once the del_timer_sync in rt5645_i2c_remove is concurrently
run with the rt5645_btn_check_callback, the canceled jack_detect_work
will be rescheduled again, leading to possible use-after-free.

This patch fix the issue by placing the del_timer_sync function before
the cancel_delayed_work_sync.

Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20220516092035.28283-1-linma@zju.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-pci: fix a NULL pointer dereference in nvme_alloc_admin_tags

[ Upstream commit da42761181627e9bdc37d18368b827948a583929 ]

In nvme_alloc_admin_tags, the admin_q can be set to an error (typically
-ENOMEM) if the blk_mq_init_queue call fails to set up the queue, which
is checked immediately after the call. However, when we return the error
message up the stack, to nvme_reset_work the error takes us to
nvme_remove_dead_ctrl()
  nvme_dev_disable()
   nvme_suspend_queue(&dev->queues[0]).

Here, we only check that the admin_q is non-NULL, rather than not
an error or NULL, and begin quiescing a queue that never existed, leading
to bad / NULL pointer dereference.

Signed-off-by: Kyle Smith <kyles@hpe.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

openrisc: start CPU timer early in boot

[ Upstream commit 516dd4aacd67a0f27da94f3fe63fe0f4dbab6e2b ]

In order to measure the boot process, the timer should be switched on as
early in boot as possible. As well, the commit defines the get_cycles
macro, like the previous patches in this series, so that generic code is
aware that it's implemented by the platform, as is done on other archs.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Acked-by: Stafford Horne <shorne@gmail.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usbnet: Run unregister_netdev() before unbind() again

[ Upstream commit d1408f6b4dd78fb1b9e26bcf64477984e5f85409 ]

Commit 2c9d6c2b871d ("usbnet: run unbind() before unregister_netdev()")
sought to fix a use-after-free on disconnect of USB Ethernet adapters.

It turns out that a different fix is necessary to address the issue:
https://lore.kernel.org/netdev/18b3541e5372bc9b9fc733d422f4e698c089077c.1650177997.git.lukas@wunner.de/

So the commit was not necessary.

The commit made binding and unbinding of USB Ethernet asymmetrical:
Before, usbnet_probe() first invoked the ->bind() callback and then
register_netdev().  usbnet_disconnect() mirrored that by first invoking
unregister_netdev() and then ->unbind().

Since the commit, the order in usbnet_disconnect() is reversed and no
longer mirrors usbnet_probe().

One consequence is that a PHY disconnected (and stopped) in ->unbind()
is afterwards stopped once more by unregister_netdev() as it closes the
netdev before unregistering.  That necessitates a contortion in ->stop()
because the PHY may only be stopped if it hasn't already been
disconnected.

Reverting the commit allows making the call to phy_stop() unconditional
in ->stop().

Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500
Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Oliver Neukum <oneukum@suse.com>
Cc: Martyn Welch <martyn.welch@collabora.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: cec-adap.c: fix is_configuring state

[ Upstream commit 59267fc34f4900dcd2ec3295f6be04b79aee2186 ]

If an adapter is trying to claim a free logical address then it is
in the 'is_configuring' state. If during that process the cable is
disconnected (HPD goes low, which in turn invalidates the physical
address), then cec_adap_unconfigure() is called, and that set the
is_configuring boolean to false, even though the thread that's
trying to claim an LA is still running.

Don't touch the is_configuring bool in cec_adap_unconfigure(), it
will eventually be cleared by the thread. By making that change
the cec_config_log_addr() function also had to change: it was
aborting if is_configuring became false (since that is what
cec_adap_unconfigure() did), but that no longer works. Instead
check if the physical address is invalid. That is a much
more appropriate check anyway.

This fixes a bug where the the adapter could be disabled even
though the device was still configuring. This could cause POLL
transmits to time out.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: imon: reorganize serialization

[ Upstream commit db264d4c66c0fe007b5d19fd007707cd0697603d ]

Since usb_register_dev() from imon_init_display() from imon_probe() holds
minor_rwsem while display_open() which holds driver_lock and ictx->lock is
called with minor_rwsem held from usb_open(), holding driver_lock or
ictx->lock when calling usb_register_dev() causes circular locking
dependency problem.

Since usb_deregister_dev() from imon_disconnect() holds minor_rwsem while
display_open() which holds driver_lock is called with minor_rwsem held,
holding driver_lock when calling usb_deregister_dev() also causes circular
locking dependency problem.

Sean Young explained that the problem is there are imon devices which have
two usb interfaces, even though it is one device. The probe and disconnect
function of both usb interfaces can run concurrently.

Alan Stern responded that the driver and USB cores guarantee that when an
interface is probed, both the interface and its USB device are locked.
Ditto for when the disconnect callback gets run. So concurrent probing/
disconnection of multiple interfaces on the same device is not possible.

Therefore, we don't need locks for handling race between imon_probe() and
imon_disconnect(). But we still need to handle race between display_open()
/vfd_write()/lcd_write()/display_close() and imon_disconnect(), for
disconnect event can happen while file descriptors are in use.

Since "struct file"->private_data is set by display_open(), vfd_write()/
lcd_write()/display_close() can assume that "struct file"->private_data
is not NULL even after usb_set_intfdata(interface, NULL) was called.

Replace insufficiently held driver_lock with refcount_t based management.
Add a boolean flag for recording whether imon_disconnect() was already
called. Use RCU for accessing this boolean flag and refcount_t.

Since the boolean flag for imon_disconnect() is shared, disconnect event
on either intf0 or intf1 affects both interfaces. But I assume that this
change does not matter, for usually disconnect event would not happen
while interfaces are in use.

Link: https://syzkaller.appspot.com/bug?extid=c558267ad910fc494497
Reported-by: syzbot <syzbot+c558267ad910fc494497@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+c558267ad910fc494497@syzkaller.appspotmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ccs-core.c: fix failure to call clk_disable_unprepare

[ Upstream commit eca89cf60b040ee2cae693ea72a0364284f3084c ]

Fixes smatch warning:

drivers/media/i2c/ccs/ccs-core.c:1676 ccs_power_on() warn: 'sensor->ext_clk' from clk_prepare_enable() not released on lines: 1606.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: hantro: HEVC: unconditionnaly set pps_{cb/cr}_qp_offset values

[ Upstream commit 46c836569196f377f87a3657b330cffaf94bd727 ]

Always set pps_cb_qp_offset and pps_cr_qp_offset values in Hantro/G2
register whatever is V4L2_HEVC_PPS_FLAG_PPS_SLICE_CHROMA_QP_OFFSETS_PRESENT
flag value.
The vendor code does the same to set these values.
This fixes conformance test CAINIT_G_SHARP_3.

Fluster HEVC score is increase by one with this patch.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: coda: limit frame interval enumeration to supported encoder frame sizes

[ Upstream commit 67e33dd957880879e785cfea83a3aa24bd5c5577 ]

Let VIDIOC_ENUM_FRAMEINTERVALS return -EINVAL if userspace queries
frame intervals for frame sizes unsupported by the encoder. Fixes the
following v4l2-compliance failure:

fail: v4l2-test-formats.cpp(123): found frame intervals for invalid size 47x16
fail: v4l2-test-formats.cpp(282): node->codec_mask & STATEFUL_ENCODER
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: FAIL

[hverkuil: drop incorrect 'For decoder devices, return -ENOTTY.' in the commit log]

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: rga: fix possible memory leak in rga_probe

[ Upstream commit a71eb6025305192e646040cd76ccacb5bd48a1b5 ]

rga->m2m_dev needs to be freed when rga_probe fails.

Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: fix encap offload ethernet type check

[ Upstream commit bc98e7fdd80d215b4b55eea001023231eb8ce12e ]

The driver needs to check if the format is 802.2 vs 802.3 in order to set
a tx descriptor flag. skb->protocol can't be used, since it may not be properly
initialized for packets coming in from a packet socket.
Fix misdetection by checking the ethertype from the skb data instead

Reported-by: Thibaut VARÈNE <hacks+kernel@slashdirt.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7921: accept rx frames with non-standard VHT MCS10-11

[ Upstream commit 3128ea016965ce9f91ddf4e1dd944724462d1698 ]

The hardware receives them properly, they should not be dropped

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtlwifi: Use pr_warn instead of WARN_ONCE

[ Upstream commit ad732da434a2936128769216eddaece3b1af4588 ]

This memory allocation failure can be triggered by fault injection or
high pressure testing, resulting a WARN.

Fix this by replacing WARN with pr_warn.

Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220511014453.1621366-1-dzm91@hust.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipmi: Fix pr_fmt to avoid compilation issues

[ Upstream commit 2ebaf18a0b7fb764bba6c806af99fe868cee93de ]

The was it was wouldn't work in some situations, simplify it.  What was
there was unnecessary complexity.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipmi:ssif: Check for NULL msg when handling events and messages

[ Upstream commit 7602b957e2404e5f98d9a40b68f1fd27f0028712 ]

Even though it's not possible to get into the SSIF_GETTING_MESSAGES and
SSIF_GETTING_EVENTS states without a valid message in the msg field,
it's probably best to be defensive here and check and print a log, since
that means something else went wrong.

Also add a default clause to that switch statement to release the lock
and print a log, in case the state variable gets messed up somehow.

Reported-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: PM: Block ASUS B1400CEAE from suspend to idle by default

[ Upstream commit d52848620de00cde4a3a5df908e231b8c8868250 ]

ASUS B1400CEAE fails to resume from suspend to idle by default.  This was
bisected back to commit df4f9bc4fb9c ("nvme-pci: add support for ACPI
StorageD3Enable property") but this is a red herring to the problem.

Before this commit the system wasn't getting into deepest sleep state.
Presumably this commit is allowing entry into deepest sleep state as
advertised by firmware, but there are some other problems related to
the wakeup.

As it is confirmed the system works properly with S3, set the default for
this system to S3.

Reported-by: Jian-Hong Pan <jhp@endlessos.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215742
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Jian-Hong Pan <jhp@endlessos.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dma-debug: change allocation mode from GFP_NOWAIT to GFP_ATIOMIC

[ Upstream commit 84bc4f1dbbbb5f8aa68706a96711dccb28b518e5 ]

We observed the error "cacheline tracking ENOMEM, dma-debug disabled"
during a light system load (copying some files). The reason for this error
is that the dma_active_cacheline radix tree uses GFP_NOWAIT allocation -
so it can't access the emergency memory reserves and it fails as soon as
anybody reaches the watermark.

This patch changes GFP_NOWAIT to GFP_ATOMIC, so that it can access the
emergency memory reserves.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: stm32-qspi: Fix wait_cmd timeout in APM mode

[ Upstream commit d83d89ea68b4726700fa87b22db075e4217e691c ]

In APM mode, TCF and TEF flags are not set. To avoid timeout in
stm32_qspi_wait_cmd(), don't check if TCF/TEF are set.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reported-by: eberhard.stoll@kontron.de
Link: https://lore.kernel.org/r/20220511074644.558874-2-patrice.chotard@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/core: Avoid obvious double update_rq_clock warning

[ Upstream commit 2679a83731d51a744657f718fc02c3b077e47562 ]

When we use raw_spin_rq_lock() to acquire the rq lock and have to
update the rq clock while holding the lock, the kernel may issue
a WARN_DOUBLE_CLOCK warning.

Since we directly use raw_spin_rq_lock() to acquire rq lock instead of
rq_lock(), there is no corresponding change to rq->clock_update_flags.
In particular, we have obtained the rq lock of other CPUs, the
rq->clock_update_flags of this CPU may be RQCF_UPDATED at this time, and
then calling update_rq_clock() will trigger the WARN_DOUBLE_CLOCK warning.

So we need to clear RQCF_UPDATED of rq->clock_update_flags to avoid
the WARN_DOUBLE_CLOCK warning.

For the sched_rt_period_timer() and migrate_task_rq_dl() cases
we simply replace raw_spin_rq_lock()/raw_spin_rq_unlock() with
rq_lock()/rq_unlock().

For the {pull,push}_{rt,dl}_task() cases, we add the
double_rq_clock_clear_update() function to clear RQCF_UPDATED of
rq->clock_update_flags, and call double_rq_clock_clear_update()
before double_lock_balance()/double_rq_lock() returns to avoid the
WARN_DOUBLE_CLOCK warning.

Some call trace reports:
Call Trace 1:
 <IRQ>
 sched_rt_period_timer+0x10f/0x3a0
 ? enqueue_top_rt_rq+0x110/0x110
 __hrtimer_run_queues+0x1a9/0x490
 hrtimer_interrupt+0x10b/0x240
 __sysvec_apic_timer_interrupt+0x8a/0x250
 sysvec_apic_timer_interrupt+0x9a/0xd0
 </IRQ>
 <TASK>
 asm_sysvec_apic_timer_interrupt+0x12/0x20

Call Trace 2:
 <TASK>
 activate_task+0x8b/0x110
 push_rt_task.part.108+0x241/0x2c0
 push_rt_tasks+0x15/0x30
 finish_task_switch+0xaa/0x2e0
 ? __switch_to+0x134/0x420
 __schedule+0x343/0x8e0
 ? hrtimer_start_range_ns+0x101/0x340
 schedule+0x4e/0xb0
 do_nanosleep+0x8e/0x160
 hrtimer_nanosleep+0x89/0x120
 ? hrtimer_init_sleeper+0x90/0x90
 __x64_sys_nanosleep+0x96/0xd0
 do_syscall_64+0x34/0x90
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Call Trace 3:
 <TASK>
 deactivate_task+0x93/0xe0
 pull_rt_task+0x33e/0x400
 balance_rt+0x7e/0x90
 __schedule+0x62f/0x8e0
 do_task_dead+0x3f/0x50
 do_exit+0x7b8/0xbb0
 do_group_exit+0x2d/0x90
 get_signal+0x9df/0x9e0
 ? preempt_count_add+0x56/0xa0
 ? __remove_hrtimer+0x35/0x70
 arch_do_signal_or_restart+0x36/0x720
 ? nanosleep_copyout+0x39/0x50
 ? do_nanosleep+0x131/0x160
 ? audit_filter_inodes+0xf5/0x120
 exit_to_user_mode_prepare+0x10f/0x1e0
 syscall_exit_to_user_mode+0x17/0x30
 do_syscall_64+0x40/0x90
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Call Trace 4:
 update_rq_clock+0x128/0x1a0
 migrate_task_rq_dl+0xec/0x310
 set_task_cpu+0x84/0x1e4
 try_to_wake_up+0x1d8/0x5c0
 wake_up_process+0x1c/0x30
 hrtimer_wakeup+0x24/0x3c
 __hrtimer_run_queues+0x114/0x270
 hrtimer_interrupt+0xe8/0x244
 arch_timer_handler_phys+0x30/0x50
 handle_percpu_devid_irq+0x88/0x140
 generic_handle_domain_irq+0x40/0x60
 gic_handle_irq+0x48/0xe0
 call_on_irq_stack+0x2c/0x60
 do_interrupt_handler+0x80/0x84

Steps to reproduce:
1. Enable CONFIG_SCHED_DEBUG when compiling the kernel
2. echo 1 > /sys/kernel/debug/clear_warn_once
   echo "WARN_DOUBLE_CLOCK" > /sys/kernel/debug/sched/features
   echo "NO_RT_PUSH_IPI" > /sys/kernel/debug/sched/features
3. Run some rt/dl tasks that periodically work and sleep, e.g.
Create 2*n rt or dl (90% running) tasks via rt-app (on a system
with n CPUs), and Dietmar Eggemann reports Call Trace 4 when running
on PREEMPT_RT kernel.

Signed-off-by: Hao Jia <jiahao.os@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20220430085843.62939-2-jiahao.os@bytedance.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/amd/ibs: Cascade pmu init functions' return value

[ Upstream commit 39b2ca75eec8a33e2ffdb8aa0c4840ec3e3b472c ]

IBS pmu initialization code ignores return value provided by
callee functions. Fix it.

Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220509044914.1473-2-ravi.bangoria@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/preempt: disable __preempt_count_add() optimization for PROFILE_ALL_BRANCHES

[ Upstream commit 63678eecec57fc51b778be3da35a397931287170 ]

gcc 12 does not (always) optimize away code that should only be generated
if parameters are constant and within in a certain range. This depends on
various obscure kernel config options, however in particular
PROFILE_ALL_BRANCHES can trigger this compile error:

In function ‘__atomic_add_const’,
    inlined from ‘__preempt_count_add.part.0’ at ./arch/s390/include/asm/preempt.h:50:3:
./arch/s390/include/asm/atomic_ops.h:80:9: error: impossible constraint in ‘asm’
   80 |         asm volatile(                                                   \
      |         ^~~

Workaround this by simply disabling the optimization for
PROFILE_ALL_BRANCHES, since the kernel will be so slow, that this
optimization won't matter at all.

Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: remove two BUG() from skb_checksum_help()

[ Upstream commit d7ea0d9df2a6265b2b180d17ebc64b38105968fc ]

I have a syzbot report that managed to get a crash in skb_checksum_help()

If syzbot can trigger these BUG(), it makes sense to replace
them with more friendly WARN_ON_ONCE() since skb_checksum_help()
can instead return an error code.

Note that syzbot will still crash there, until real bug is fixed.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Alter FPIN stat accounting logic

[ Upstream commit e6f51041450282a8668af3a8fc5c7744e81a447c ]

When configuring CMF management based on signals instead of FPINs, FPIN
alarm and warning statistics are not tracked.

Change the behavior so that FPIN alarms and warnings are always tracked
regardless of the configured mode.

Similar changes are made in the CMF signal stat accounting logic.  Upon
receipt of a signal, only track signaled alarms and warnings. FPIN stats
should not be incremented upon receipt of a signal.

Link: https://lore.kernel.org/r/20220506035519.50908-11-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: tscs454: Add endianness flag in snd_soc_component_driver

[ Upstream commit ff69ec96b87dccb3a29edef8cec5d4fefbbc2055 ]

The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over an I2S DAI and as such should
have endianness applied.

A fixup is also required to use the width directly rather than relying
on the format in hw_params, now both little and big endian would be
supported. It is worth noting this changes the behaviour of S24_LE to
use a word length of 24 rather than 32. This would appear to be a
correction since the fact S24_LE is stored as 32 bits should not be
presented over the bus.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-26-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

of: Support more than one crash kernel regions for kexec -s

[ Upstream commit 8af6b91f58341325bf74ecb0389ddc0039091d84 ]

When "crashkernel=X,high" is used, there may be two crash regions:
high=crashk_res and low=crashk_low_res. But now the syscall
kexec_file_load() only add crashk_res into "linux,usable-memory-range",
this may cause the second kernel to have no available dma memory.

Fix it like kexec-tools does for option -c, add both 'high' and 'low'
regions into the dtb.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Baoquan He <bhe@redhat.com>
Link: https://lore.kernel.org/r/20220506114402.365-6-thunder.leizhen@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: bigben: fix slab-out-of-bounds Write in bigben_probe

[ Upstream commit fc4ef9d5724973193bfa5ebed181dba6de3a56db ]

There is a slab-out-of-bounds Write bug in hid-bigbenff driver.
The problem is the driver assumes the device must have an input but
some malicious devices violate this assumption.

Fix this by checking hid_device's input is non-empty before its usage.

Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: mt6315: Enforce regulator-compatible, not name

[ Upstream commit 6d435a94ba5bb4f2ad381c0828fbae89c66b50fe ]

The MT6315 PMIC dt-binding should enforce that one of the valid
regulator-compatible is set in each regulator node. However it was
mistakenly matching against regulator-name instead.

Fix the typo. This not only fixes the compatible verification, but also
lifts the regulator-name restriction, so that more meaningful names can
be set for each platform.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220429201325.2205799-1-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu/ucode: Remove firmware load type check in amdgpu_ucode_free_bo

[ Upstream commit ab0cd4a9ae5b4679b714d8dbfedc0901fecdce9f ]

When psp_hw_init failed, it will set the load_type to AMDGPU_FW_LOAD_DIRECT.
During amdgpu_device_ip_fini, amdgpu_ucode_free_bo checks that load_type is
AMDGPU_FW_LOAD_DIRECT and skips deallocating fw_buf causing memory leak.
Remove load_type check in amdgpu_ucode_free_bo.

Signed-off-by: Alice Wong <shiwei.wong@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu/psp: move PSP memory alloc from hw_init to sw_init

[ Upstream commit b95b5391684b39695887afb4a13cccee7820f5d6 ]

Memory allocations should be done in sw_init.  hw_init should
just be hardware programming needed to initialize the IP block.
This is how most other IP blocks work.  Move the GPU memory
allocations from psp hw_init to psp sw_init and move the memory
free to sw_fini.  This also fixes a potential GPU memory leak
if psp hw_init fails.

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mlxsw: Treat LLDP packets as control

[ Upstream commit 0106668cd2f91bf913fb78972840dedfba80a3c3 ]

When trapping packets for on-CPU processing, Spectrum machines
differentiate between control and non-control traps. Traffic trapped
through non-control traps is treated as data and kept in shared buffer in
pools 0-4. Traffic trapped through control traps is kept in the dedicated
control buffer 9. The advantage of marking traps as control is that
pressure in the data plane does not prevent the control traffic to be
processed.

When the LLDP trap was introduced, it was marked as a control trap. But
then in commit aed4b5721143 ("mlxsw: spectrum: PTP: Hook into packet
receive path"), PTP traps were introduced. Because Ethernet-encapsulated
PTP packets look to the Spectrum-1 ASIC as LLDP traffic and are trapped
under the LLDP trap, this trap was reconfigured as non-control, in sync
with the PTP traps.

There is however no requirement that PTP traffic be handled as data.
Besides, the usual encapsulation for PTP traffic is UDP, not bare Ethernet,
and that is in deployments that even need PTP, which is far less common
than LLDP. This is reflected by the default policer, which was not bumped
up to the 19Kpps / 24Kpps that is the expected load of a PTP-enabled
Spectrum-1 switch.

Marking of LLDP trap as non-control was therefore probably misguided. In
this patch, change it back to control.

Reported-by: Maksym Yaremchuk <maksymy@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mlxsw: spectrum_dcb: Do not warn about priority changes

[ Upstream commit b6b584562cbe7dc357083459d6dd5b171e12cadb ]

The idea behind the warnings is that the user would get warned in case when
more than one priority is configured for a given DSCP value on a netdevice.

The warning is currently wrong, because dcb_ieee_getapp_mask() returns
the first matching entry, not all of them, and the warning will then claim
that some priority is "current", when in fact it is not.

But more importantly, the warning is misleading in general. Consider the
following commands:

 # dcb app flush dev swp19 dscp-prio
 # dcb app add dev swp19 dscp-prio 24:3
 # dcb app replace dev swp19 dscp-prio 24:2

The last command will issue the following warning:

 mlxsw_spectrum3 0000:07:00.0 swp19: Ignoring new priority 2 for DSCP 24 in favor of current value of 3

The reason is that the "replace" command works by first adding the new
value, and then removing all old values. This is the only way to make the
replacement without causing the traffic to be prioritized to whatever the
chip defaults to. The warning is issued in response to adding the new
priority, and then no warning is shown when the old priority is removed.
The upshot is that the canonical way to change traffic prioritization
always produces a warning about ignoring the new priority, but what gets
configured is in fact what the user intended.

An option to just emit warning every time that the prioritization changes
just to make it clear that it happened is obviously unsatisfactory.

Therefore, in this patch, remove the warnings.

Reported-by: Maksym Yaremchuk <maksymy@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: dapm: Don't fold register value changes into notifications

[ Upstream commit ad685980469b9f9b99d4d6ea05f4cb8f57cb2234 ]

DAPM tracks and reports the value presented to the user from DAPM controls
separately to the register value, these may diverge during initialisation
or when an autodisable control is in use.

When writing DAPM controls we currently report that a change has occurred
if either the DAPM value or the value stored in the register has changed,
meaning that if the two are out of sync we may appear to report a spurious
event to userspace. Since we use this folded in value for nothing other
than the value reported to userspace simply drop the folding in of the
register change.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220428161833.3690050-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: fs, delete the FTE when there are no rules attached to it

[ Upstream commit 7b0c6338597613f465d131bd939a51844a00455a ]

When an FTE has no children is means all the rules where removed
and the FTE can be deleted regardless of the dests_size value.
While dests_size should be 0 when there are no children
be extra careful not to leak memory or get firmware syndrome
if the proper bookkeeping of dests_size wasn't done.

Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv6: Don't send rs packets to the interface of ARPHRD_TUNNEL

[ Upstream commit b52e1cce31ca721e937d517411179f9196ee6135 ]

ARPHRD_TUNNEL interface can't process rs packets
and will generate TX errors

ex:
ip tunnel add ethn mode ipip local 192.168.1.1 remote 192.168.1.2
ifconfig ethn x.x.x.x

ethn: flags=209<UP,POINTOPOINT,RUNNING,NOARP>  mtu 1480
inet x.x.x.x  netmask 255.255.255.255  destination x.x.x.x
inet6 fe80::5efe:ac1e:3cdb  prefixlen 64  scopeid 0x20<link>
tunnel   txqueuelen 1000  (IPIP Tunnel)
RX packets 0  bytes 0 (0.0 B)
RX errors 0  dropped 0  overruns 0  frame 0
TX packets 0  bytes 0 (0.0 B)
TX errors 3  dropped 0 overruns 0  carrier 0  collisions 0

Signed-off-by: jianghaoran <jianghaoran@kylinos.cn>
Link: https://lore.kernel.org/r/20220429053802.246681-1-jianghaoran@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: target: tcmu: Fix possible data corruption

[ Upstream commit bb9b9eb0ae2e9d3f6036f0ad907c3a83dcd43485 ]

When tcmu_vma_fault() gets a page successfully, before the current context
completes page fault procedure, find_free_blocks() may run and call
unmap_mapping_range() to unmap the page. Assume that when
find_free_blocks() initially completes and the previous page fault
procedure starts to run again and completes, then one truncated page has
been mapped to userspace. But note that tcmu_vma_fault() has gotten a
refcount for the page so any other subsystem won't be able to use the page
unless the userspace address is unmapped later.

If another command subsequently runs and needs to extend dbi_thresh it may
reuse the corresponding slot for the previous page in data_bitmap. Then
though we'll allocate new page for this slot in data_area, no page fault
will happen because we have a valid map and the real request's data will be
lost.

Filesystem implementations will also run into this issue but they usually
lock the page when vm_operations_struct->fault gets a page and unlock the
page after finish_fault() completes. For truncate filesystems lock pages in
truncate_inode_pages() to protect against racing wrt. page faults.

To fix this possible data corruption scenario we can apply a method similar
to the filesystems.  For pages that are to be freed, tcmu_blocks_release()
locks and unlocks. Make tcmu_vma_fault() also lock found page under
cmdr_lock. At the same time, since tcmu_vma_fault() gets an extra page
refcount, tcmu_blocks_release() won't free pages if pages are in page fault
procedure, which means it is safe to call tcmu_blocks_release() before
unmap_mapping_range().

With these changes tcmu_blocks_release() will wait for all page faults to
be completed before calling unmap_mapping_range(). And later, if
unmap_mapping_range() is called, it will ensure stale mappings are removed.

Link: https://lore.kernel.org/r/20220421023735.9018-1-xiaoguang.wang@linux.alibaba.com
Reviewed-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: msm: fix error check return value of irq_of_parse_and_map()

[ Upstream commit b9e4f1d2b505df8e2439b63e67afaa287c1c43e2 ]

The irq_of_parse_and_map() function returns 0 on failure, and does not
return an negative value.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/483175/
Link: https://lore.kernel.org/r/20220424031959.3172406-1-lv.ruyi@zte.com.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: compat: Do not treat syscall number as ESR_ELx for a bad syscall

[ Upstream commit 3fed9e551417b84038b15117732ea4505eee386b ]

If a compat process tries to execute an unknown system call above the
__ARM_NR_COMPAT_END number, the kernel sends a SIGILL signal to the
offending process. Information about the error is printed to dmesg in
compat_arm_syscall() -> arm64_notify_die() -> arm64_force_sig_fault() ->
arm64_show_signal().

arm64_show_signal() interprets a non-zero value for
current->thread.fault_code as an exception syndrome and displays the
message associated with the ESR_ELx.EC field (bits 31:26).
current->thread.fault_code is set in compat_arm_syscall() ->
arm64_notify_die() with the bad syscall number instead of a valid ESR_ELx
value. This means that the ESR_ELx.EC field has the value that the user set
for the syscall number and the kernel can end up printing bogus exception
messages*. For example, for the syscall number 0x68000000, which evaluates
to ESR_ELx.EC value of 0x1A (ESR_ELx_EC_FPAC) the kernel prints this error:

[   18.349161] syscall[300]: unhandled exception: ERET/ERETAA/ERETAB, ESR 0x68000000, Oops - bad compat syscall(2) in syscall[10000+50000]
[   18.350639] CPU: 2 PID: 300 Comm: syscall Not tainted 5.18.0-rc1 #79
[   18.351249] Hardware name: Pine64 RockPro64 v2.0 (DT)
[..]

which is misleading, as the bad compat syscall has nothing to do with
pointer authentication.

Stop arm64_show_signal() from printing exception syndrome information by
having compat_arm_syscall() set the ESR_ELx value to 0, as it has no
meaning for an invalid system call number. The example above now becomes:

[   19.935275] syscall[301]: unhandled exception: Oops - bad compat syscall(2) in syscall[10000+50000]
[   19.936124] CPU: 1 PID: 301 Comm: syscall Not tainted 5.18.0-rc1-00005-g7e08006d4102 #80
[   19.936894] Hardware name: Pine64 RockPro64 v2.0 (DT)
[..]

which although shows less information because the syscall number,
wrongfully advertised as the ESR value, is missing, it is better than
showing plainly wrong information. The syscall number can be easily
obtained with strace.

*A 32-bit value above or equal to 0x8000_0000 is interpreted as a negative
integer in compat_arm_syscal() and the condition scno < __ARM_NR_COMPAT_END
evaluates to true; the syscall will exit to userspace in this case with the
ENOSYS error code instead of arm64_notify_die() being called.

Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220425114444.368693-3-alexandru.elisei@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath10k: skip ath10k_halt during suspend for driver state RESTARTING

[ Upstream commit b72a4aff947ba807177bdabb43debaf2c66bee05 ]

Double free crash is observed when FW recovery(caused by wmi
timeout/crash) is followed by immediate suspend event. The FW recovery
is triggered by ath10k_core_restart() which calls driver clean up via
ath10k_halt(). When the suspend event occurs between the FW recovery,
the restart worker thread is put into frozen state until suspend completes.
The suspend event triggers ath10k_stop() which again triggers ath10k_halt()
The double invocation of ath10k_halt() causes ath10k_htt_rx_free() to be
called twice(Note: ath10k_htt_rx_alloc was not called by restart worker
thread because of its frozen state), causing the crash.

To fix this, during the suspend flow, skip call to ath10k_halt() in
ath10k_stop() when the current driver state is ATH10K_STATE_RESTARTING.
Also, for driver state ATH10K_STATE_RESTARTING, call
ath10k_wait_for_suspend() in ath10k_stop(). This is because call to
ath10k_wait_for_suspend() is skipped later in
[ath10k_halt() > ath10k_core_stop()] for the driver state
ATH10K_STATE_RESTARTING.

The frozen restart worker thread will be cancelled during resume when the
device comes out of suspend.

Below is the crash stack for reference:

[  428.469167] ------------[ cut here ]------------
[  428.469180] kernel BUG at mm/slub.c:4150!
[  428.469193] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[  428.469219] Workqueue: events_unbound async_run_entry_fn
[  428.469230] RIP: 0010:kfree+0x319/0x31b
[  428.469241] RSP: 0018:ffffa1fac015fc30 EFLAGS: 00010246
[  428.469247] RAX: ffffedb10419d108 RBX: ffff8c05262b0000
[  428.469252] RDX: ffff8c04a8c07000 RSI: 0000000000000000
[  428.469256] RBP: ffffa1fac015fc78 R08: 0000000000000000
[  428.469276] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  428.469285] Call Trace:
[  428.469295]  ? dma_free_attrs+0x5f/0x7d
[  428.469320]  ath10k_core_stop+0x5b/0x6f
[  428.469336]  ath10k_halt+0x126/0x177
[  428.469352]  ath10k_stop+0x41/0x7e
[  428.469387]  drv_stop+0x88/0x10e
[  428.469410]  __ieee80211_suspend+0x297/0x411
[  428.469441]  rdev_suspend+0x6e/0xd0
[  428.469462]  wiphy_suspend+0xb1/0x105
[  428.469483]  ? name_show+0x2d/0x2d
[  428.469490]  dpm_run_callback+0x8c/0x126
[  428.469511]  ? name_show+0x2d/0x2d
[  428.469517]  __device_suspend+0x2e7/0x41b
[  428.469523]  async_suspend+0x1f/0x93
[  428.469529]  async_run_entry_fn+0x3d/0xd1
[  428.469535]  process_one_work+0x1b1/0x329
[  428.469541]  worker_thread+0x213/0x372
[  428.469547]  kthread+0x150/0x15f
[  428.469552]  ? pr_cont_work+0x58/0x58
[  428.469558]  ? kthread_blkcg+0x31/0x31

Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00288-QCARMSWPZ-1
Co-developed-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Abhishek Kumar <kuabhs@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220426221859.v2.1.I650b809482e1af8d0156ed88b5dc2677a0711d46@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/pm: fix the compile warning

[ Upstream commit 555238d92ac32dbad2d77ad2bafc48d17391990c ]

Fix the compile warning below:
drivers/gpu/drm/amd/amdgpu/../pm/legacy-dpm/kv_dpm.c:1641
kv_get_acp_boot_level() warn: always true condition '(table->entries[i]->clk >= 0) => (0-u32max >= 0)'

Reported-by: kernel test robot <lkp@intel.com>
CC: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/plane: Move range check for format_count earlier

[ Upstream commit 4b674dd69701c2e22e8e7770c1706a69f3b17269 ]

While the check for format_count > 64 in __drm_universal_plane_init()
shouldn't be hit (it's a WARN_ON), in its current position it will then
leak the plane->format_types array and fail to call
drm_mode_object_unregister() leaking the modeset identifier. Move it to
the start of the function to avoid allocating those resources in the
first place.

Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://lore.kernel.org/dri-devel/20211203102815.38624-1-steven.price@arm.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: bytcr_rt5640: Add quirk for the HP Pro Tablet 408

[ Upstream commit ce216cfa84a4e1c23b105e652c550bdeaac9e922 ]

Add a quirk for the HP Pro Tablet 408, this BYTCR tablet has no CHAN
package in its ACPI tables and uses SSP0-AIF1 rather then SSP0-AIF2 which
is the default for BYTCR devices.

It also uses DMIC1 for the internal mic rather then the default IN3
and it uses JD2 rather then the default JD1 for jack-detect.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211485
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220427134918.527381-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath11k: disable spectral scan during spectral deinit

[ Upstream commit 161c64de239c7018e0295e7e0520a19f00aa32dc ]

When ath11k modules are removed using rmmod with spectral scan enabled,
crash is observed. Different crash trace is observed for each crash.

Send spectral scan disable WMI command to firmware before cleaning
the spectral dbring in the spectral_deinit API to avoid this crash.

call trace from one of the crash observed:
[ 1252.880802] Unable to handle kernel NULL pointer dereference at virtual address 00000008
[ 1252.882722] pgd = 0f42e886
[ 1252.890955] [00000008] *pgd=00000000
[ 1252.893478] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[ 1253.093035] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.89 #0
[ 1253.115261] Hardware name: Generic DT based system
[ 1253.121149] PC is at ath11k_spectral_process_data+0x434/0x574 [ath11k]
[ 1253.125940] LR is at 0x88e31017
[ 1253.132448] pc : [<7f9387b8>]    lr : [<88e31017>]    psr: a0000193
[ 1253.135488] sp : 80d01bc8  ip : 00000001  fp : 970e0000
[ 1253.141737] r10: 88e31000  r9 : 970ec000  r8 : 00000080
[ 1253.146946] r7 : 94734040  r6 : a0000113  r5 : 00000057  r4 : 00000000
[ 1253.152159] r3 : e18cb694  r2 : 00000217  r1 : 1df1f000  r0 : 00000001
[ 1253.158755] Flags: NzCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment user
[ 1253.165266] Control: 10c0383d  Table: 5e71006a  DAC: 00000055
[ 1253.172472] Process swapper/0 (pid: 0, stack limit = 0x60870141)
[ 1253.458055] [<7f9387b8>] (ath11k_spectral_process_data [ath11k]) from [<7f917fdc>] (ath11k_dbring_buffer_release_event+0x214/0x2e4 [ath11k])
[ 1253.466139] [<7f917fdc>] (ath11k_dbring_buffer_release_event [ath11k]) from [<7f8ea3c4>] (ath11k_wmi_tlv_op_rx+0x1840/0x29cc [ath11k])
[ 1253.478807] [<7f8ea3c4>] (ath11k_wmi_tlv_op_rx [ath11k]) from [<7f8fe868>] (ath11k_htc_rx_completion_handler+0x180/0x4e0 [ath11k])
[ 1253.490699] [<7f8fe868>] (ath11k_htc_rx_completion_handler [ath11k]) from [<7f91308c>] (ath11k_ce_per_engine_service+0x2c4/0x3b4 [ath11k])
[ 1253.502386] [<7f91308c>] (ath11k_ce_per_engine_service [ath11k]) from [<7f9a4198>] (ath11k_pci_ce_tasklet+0x28/0x80 [ath11k_pci])
[ 1253.514811] [<7f9a4198>] (ath11k_pci_ce_tasklet [ath11k_pci]) from [<8032227c>] (tasklet_action_common.constprop.2+0x64/0xe8)
[ 1253.526476] [<8032227c>] (tasklet_action_common.constprop.2) from [<803021e8>] (__do_softirq+0x130/0x2d0)
[ 1253.537756] [<803021e8>] (__do_softirq) from [<80322610>] (irq_exit+0xcc/0xe8)
[ 1253.547304] [<80322610>] (irq_exit) from [<8036a4a4>] (__handle_domain_irq+0x60/0xb4)
[ 1253.554428] [<8036a4a4>] (__handle_domain_irq) from [<805eb348>] (gic_handle_irq+0x4c/0x90)
[ 1253.562321] [<805eb348>] (gic_handle_irq) from [<80301a78>] (__irq_svc+0x58/0x8c)

Tested-on: QCN6122 hw1.0 AHB WLAN.HK.2.6.0.1-00851-QCAHKSWPL_SILICONZ-1

Signed-off-by: Hari Chandrakanthan <quic_haric@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1649396345-349-1-git-send-email-quic_haric@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Fix resource leak in lpfc_sli4_send_seq_to_ulp()

[ Upstream commit 646db1a560f44236b7278b822ca99a1d3b6ea72c ]

If no handler is found in lpfc_complete_unsol_iocb() to match the rctl of a
received frame, the frame is dropped and resources are leaked.

Fix by returning resources when discarding an unhandled frame type.  Update
lpfc_fc_frame_check() handling of NOP basic link service.

Link: https://lore.kernel.org/r/20220426181419.9154-1-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: Use pm_runtime_resume_and_get() instead of pm_runtime_get_sync()

[ Upstream commit 75b8715e20a20bc7b4844835e4035543a2674200 ]

Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync() and
pm_runtime_put_noidle(). This change is just to simplify the code, no
actual functional changes.

Link: https://lore.kernel.org/r/20220420090353.2588804-1-chi.minghao@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu/sdma: Fix incorrect calculations of the wptr of the doorbells

[ Upstream commit 7dba6e838e741caadcf27ef717b6dcb561e77f89 ]

This patch fixes the issue where the driver miscomputes the 64-bit
values of the wptr of the SDMA doorbell when initializing the
hardware. SDMA engines v4 and later on have full 64-bit registers for
wptr thus they should be set properly.

Older generation hardwares like CIK / SI have only 16 / 20 / 24bits
for the WPTR, where the calls of lower_32_bits() will be removed in a
following patch.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Haohui Mai <ricetons@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: megaraid: Fix error check return value of register_chrdev()

[ Upstream commit c5acd61dbb32b6bda0f3a354108f2b8dcb788985 ]

If major equals 0, register_chrdev() returns an error code when it fails.
This function dynamically allocates a major and returns its number on
success, so we should use "< 0" to check it instead of "!".

Link: https://lore.kernel.org/r/20220418105755.2558828-1-lv.ruyi@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: mmc: sdhci_am654: Add the quirk to set TESTCD bit

[ Upstream commit c7666240ec76422cb7546bd07cc8ae80dc0ccdd2 ]

The ARASAN MMC controller on Keystone 3 class of devices need the SDCD
line to be connected for proper functioning. Similar to the issue pointed
out in sdhci-of-arasan.c driver, commit 3794c542641f ("mmc:
sdhci-of-arasan: Set controller to test mode when no CD bit").

In cases where this can't be connected, add a quirk to force the
controller into test mode and set the TESTCD bit. Use the flag
"ti,fails-without-test-cd", to implement this above quirk when required.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20220425063120.10135-3-a-govindraju@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: jz4740: Apply DMA engine limits to maximum segment size

[ Upstream commit afadb04f1d6e74b18a253403f5274cde5e3fd7bd ]

Do what is done in other DMA-enabled MMC host drivers (cf. host/mmci.c) and
limit the maximum segment size based on the DMA engine's capabilities. This
is needed to avoid warnings like the following with CONFIG_DMA_API_DEBUG=y.

------------[ cut here ]------------
WARNING: CPU: 0 PID: 21 at kernel/dma/debug.c:1162 debug_dma_map_sg+0x2f4/0x39c
DMA-API: jz4780-dma 13420000.dma-controller: mapping sg segment longer than device claims to support [len=98304] [max=65536]
CPU: 0 PID: 21 Comm: kworker/0:1H Not tainted 5.18.0-rc1 #19
Workqueue: kblockd blk_mq_run_work_fn
Stack : 81575aec 00000004 80620000 80620000 80620000 805e7358 00000009 801537ac
        814c832c 806276e3 806e34b4 80620000 81575aec 00000001 81575ab8 09291444
        00000000 00000000 805e7358 81575958 ffffffea 8157596c 00000000 636f6c62
        6220646b 80387a70 0000000f 6d5f6b6c 80620000 00000000 81575ba4 00000009
        805e170c 80896640 00000001 00010000 00000000 00000000 00006098 806e0000
        ...
Call Trace:
[<80107670>] show_stack+0x84/0x120
[<80528cd8>] __warn+0xb8/0xec
[<80528d78>] warn_slowpath_fmt+0x6c/0xb8
[<8016f1d4>] debug_dma_map_sg+0x2f4/0x39c
[<80169d4c>] __dma_map_sg_attrs+0xf0/0x118
[<8016a27c>] dma_map_sg_attrs+0x14/0x28
[<804f66b4>] jz4740_mmc_prepare_dma_data+0x74/0xa4
[<804f6714>] jz4740_mmc_pre_request+0x30/0x54
[<804f4ff4>] mmc_blk_mq_issue_rq+0x6e0/0x7bc
[<804f5590>] mmc_mq_queue_rq+0x220/0x2d4
[<8038b2c0>] blk_mq_dispatch_rq_list+0x480/0x664
[<80391040>] blk_mq_do_dispatch_sched+0x2dc/0x370
[<80391468>] __blk_mq_sched_dispatch_requests+0xec/0x164
[<80391540>] blk_mq_sched_dispatch_requests+0x44/0x94
[<80387900>] __blk_mq_run_hw_queue+0xb0/0xcc
[<80134c14>] process_one_work+0x1b8/0x264
[<80134ff8>] worker_thread+0x2ec/0x3b8
[<8013b13c>] kthread+0x104/0x10c
[<80101dcc>] ret_from_kernel_thread+0x14/0x1c

---[ end trace 0000000000000000 ]---

Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220411153753.50443-1-aidanmacdonald.0x0@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md/bitmap: don't set sb values if can't pass sanity check

[ Upstream commit e68cb83a57a458b01c9739e2ad9cb70b04d1e6d2 ]

If bitmap area contains invalid data, kernel will crash then mdadm
triggers "Segmentation fault".
This is cluster-md speical bug. In non-clustered env, mdadm will
handle broken metadata case. In clustered array, only kernel space
handles bitmap slot info. But even this bug only happened in clustered
env, current sanity check is wrong, the code should be changed.

How to trigger: (faulty injection)

dd if=/dev/zero bs=1M count=1 oflag=direct of=/dev/sda
dd if=/dev/zero bs=1M count=1 oflag=direct of=/dev/sdb
mdadm -C /dev/md0 -b clustered -e 1.2 -n 2 -l mirror /dev/sda /dev/sdb
mdadm -Ss
echo aaa > magic.txt
 == below modifying slot 2 bitmap data ==
dd if=magic.txt of=/dev/sda seek=16384 bs=1 count=3 <== destroy magic
dd if=/dev/zero of=/dev/sda seek=16436 bs=1 count=4 <== ZERO chunksize
mdadm -A /dev/md0 /dev/sda /dev/sdb
 == kernel crashes. mdadm outputs "Segmentation fault" ==

Reason of kernel crash:

In md_bitmap_read_sb (called by md_bitmap_create), bad bitmap magic didn't
block chunksize assignment, and zero value made DIV_ROUND_UP_SECTOR_T()
trigger "divide error".

Crash log:

kernel: md: md0 stopped.
kernel: md/raid1:md0: not clean -- starting background reconstruction
kernel: md/raid1:md0: active with 2 out of 2 mirrors
kernel: dlm: ... ...
kernel: md-cluster: Joined cluster 44810aba-38bb-e6b8-daca-bc97a0b254aa slot 1
kernel: md0: invalid bitmap file superblock: bad magic
kernel: md_bitmap_copy_from_slot can't get bitmap from slot 2
kernel: md-cluster: Could not gather bitmaps from slot 2
kernel: divide error: 0000 [#1] SMP NOPTI
kernel: CPU: 0 PID: 1603 Comm: mdadm Not tainted 5.14.6-1-default
kernel: Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
kernel: RIP: 0010:md_bitmap_create+0x1d1/0x850 [md_mod]
kernel: RSP: 0018:ffffc22ac0843ba0 EFLAGS: 00010246
kernel: ... ...
kernel: Call Trace:
kernel:  ? dlm_lock_sync+0xd0/0xd0 [md_cluster 77fe..7a0]
kernel:  md_bitmap_copy_from_slot+0x2c/0x290 [md_mod 24ea..d3a]
kernel:  load_bitmaps+0xec/0x210 [md_cluster 77fe..7a0]
kernel:  md_bitmap_load+0x81/0x1e0 [md_mod 24ea..d3a]
kernel:  do_md_run+0x30/0x100 [md_mod 24ea..d3a]
kernel:  md_ioctl+0x1290/0x15a0 [md_mod 24ea....d3a]
kernel:  ? mddev_unlock+0xaa/0x130 [md_mod 24ea..d3a]
kernel:  ? blkdev_ioctl+0xb1/0x2b0
kernel:  block_ioctl+0x3b/0x40
kernel:  __x64_sys_ioctl+0x7f/0xb0
kernel:  do_syscall_64+0x59/0x80
kernel:  ? exit_to_user_mode_prepare+0x1ab/0x230
kernel:  ? syscall_exit_to_user_mode+0x18/0x40
kernel:  ? do_syscall_64+0x69/0x80
kernel:  entry_SYSCALL_64_after_hwframe+0x44/0xae
kernel: RIP: 0033:0x7f4a15fa722b
kernel: ... ...
kernel: ---[ end trace 8afa7612f559c868 ]---
kernel: RIP: 0010:md_bitmap_create+0x1d1/0x850 [md_mod]

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: cx25821: Fix the warning when removing the module

[ Upstream commit 2203436a4d24302871617373a7eb21bc17e38762 ]

When removing the module, we will get the following warning:

[   14.746697] remove_proc_entry: removing non-empty directory 'irq/21', leaking at least 'cx25821[1]'
[   14.747449] WARNING: CPU: 4 PID: 368 at fs/proc/generic.c:717 remove_proc_entry+0x389/0x3f0
[   14.751611] RIP: 0010:remove_proc_entry+0x389/0x3f0
[   14.759589] Call Trace:
[   14.759792]  <TASK>
[   14.759975]  unregister_irq_proc+0x14c/0x170
[   14.760340]  irq_free_descs+0x94/0xe0
[   14.760640]  mp_unmap_irq+0xb6/0x100
[   14.760937]  acpi_unregister_gsi_ioapic+0x27/0x40
[   14.761334]  acpi_pci_irq_disable+0x1d3/0x320
[   14.761688]  pci_disable_device+0x1ad/0x380
[   14.762027]  ? _raw_spin_unlock_irqrestore+0x2d/0x60
[   14.762442]  ? cx25821_shutdown+0x20/0x9f0 [cx25821]
[   14.762848]  cx25821_finidev+0x48/0xc0 [cx25821]
[   14.763242]  pci_device_remove+0x92/0x240

Fix this by freeing the irq before call pci_disable_device().

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: pci: cx23885: Fix the error handling in cx23885_initdev()

[ Upstream commit e8123311cf06d7dae71e8c5fe78e0510d20cd30b ]

When the driver fails to call the dma_set_mask(), the driver will get
the following splat:

[   55.853884] BUG: KASAN: use-after-free in __process_removed_driver+0x3c/0x240
[   55.854486] Read of size 8 at addr ffff88810de60408 by task modprobe/590
[   55.856822] Call Trace:
[   55.860327]  __process_removed_driver+0x3c/0x240
[   55.861347]  bus_for_each_dev+0x102/0x160
[   55.861681]  i2c_del_driver+0x2f/0x50

This is because the driver has initialized the i2c related resources
in cx23885_dev_setup() but not released them in error handling, fix this
bug by modifying the error path that jumps after failing to call the
dma_set_mask().

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: venus: hfi: avoid null dereference in deinit

[ Upstream commit 86594f6af867b5165d2ba7b5a71fae3a5961e56c ]

If venus_probe fails at pm_runtime_put_sync the error handling first
calls hfi_destroy and afterwards hfi_core_deinit. As hfi_destroy sets
core->ops to NULL, hfi_core_deinit cannot call the core_deinit function
anymore.

Avoid this null pointer derefence by skipping the call when necessary.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath9k: fix QCA9561 PA bias level

[ Upstream commit e999a5da28a0e0f7de242d841ef7d5e48f4646ae ]

This patch fixes an invalid TX PA DC bias level on QCA9561, which
results in a very low output power and very low throughput as devices
are further away from the AP (compared to other 2.4GHz APs).

This patch was suggested by Felix Fietkau, who noted[1]:
"The value written to that register is wrong, because while the mask
definition AR_CH0_TOP2_XPABIASLVL uses a different value for 9561, the
shift definition AR_CH0_TOP2_XPABIASLVL_S is hardcoded to 12, which is
wrong for 9561."

In real life testing, without this patch the 2.4GHz throughput on
Yuncore XD3200 is around 10Mbps sitting next to the AP, and closer to
practical maximum with the patch applied.

[1] https://lore.kernel.org/all/91c58969-c60e-2f41-00ac-737786d435ae@nbd.name

Signed-off-by: Thibaut VARÈNE <hacks+kernel@slashdirt.org>
Acked-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220417145145.1847-1-hacks+kernel@slashdirt.org
Signed-off-by: Sasha Levin <sashal@kernel.org>