hwmon: (dell-smm) Add XPS 15 L502X to fan control blacklist

commit 4008bc7d39537bb3be166d8a3129c4980e1dd7dc upstream.

It has been reported[0] that the Dell XPS 15 L502X exhibits similar
freezing behavior to the other systems[1] on this blacklist. The issue
was exposed by a prior change of mine to automatically load
dell_smm_hwmon on a wider set of XPS models. To fix the regression, add
this model to the blacklist.

[0] https://bugzilla.kernel.org/show_bug.cgi?id=211081
[1] https://bugzilla.kernel.org/show_bug.cgi?id=195751

Fixes: b8a13e5e8f37 ("hwmon: (dell-smm) Use one DMI match for all XPS models")
Cc: stable@vger.kernel.org
Reported-by: Bob Hepple <bob.hepple@gmail.com>
Tested-by: Bob Hepple <bob.hepple@gmail.com>
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/a09eea7616881d40d2db2fb5fa2770dc6166bdae.1611456351.git.tommyhebb@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: tegra: Add power-domain for Tegra210 HDA

commit 1e0ca5467445bc1f41a9e403d6161a22f313dae7 upstream.

HDA initialization is failing occasionally on Tegra210 and following
print is observed in the boot log. Because of this probe() fails and
no sound card is registered.

  [16.800802] tegra-hda 70030000.hda: no codecs found!

Codecs request a state change and enumeration by the controller. In
failure cases this does not seem to happen as STATETS register reads 0.

The problem seems to be related to the HDA codec dependency on SOR
power domain. If it is gated during HDA probe then the failure is
observed. Building Tegra HDA driver into kernel image avoids this
failure but does not completely address the dependency part. Fix this
problem by adding 'power-domains' DT property for Tegra210 HDA. Note
that Tegra186 and Tegra194 HDA do this already.

Fixes: 742af7e7a0a1 ("arm64: tegra: Add Tegra210 support")
Depends-on: 96d1f078ff0 ("arm64: tegra: Add SOR power-domain for Tegra210")
Cc: <stable@vger.kernel.org>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: btusb: Some Qualcomm Bluetooth adapters stop working

commit 234f414efd1164786269849b4fbb533d6c9cdbbf upstream.

This issue starts from linux-5.10-rc1, I reproduced this issue on my
Dell Inspiron 7447 with BT adapter 0cf3:e005, the kernel will print
out: "Bluetooth: hci0: don't support firmware rome 0x31010000", and
someone else also reported the similar issue to bugzilla #211571.

I found this is a regression introduced by 'commit b40f58b97386
("Bluetooth: btusb: Add Qualcomm Bluetooth SoC WCN6855 support"), the
patch assumed that if high ROM version is not zero, it is an adapter
on WCN6855, but many old adapters don't need to load rampatch or nvm,
and they have non-zero high ROM version.

To fix it, let the driver match the rom_version in the
qca_devices_table first, if there is no entry matched, check the
high ROM version, if it is not zero, we assume this adapter is ready
to work and no need to load rampatch and nvm like previously.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211571
Fixes: b40f58b97386 ("Bluetooth: btusb: Add Qualcomm Bluetooth SoC WCN6855 support")
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ntfs: check for valid standard information attribute

commit 4dfe6bd94959222e18d512bdf15f6bf9edb9c27c upstream.

Mounting a corrupted filesystem with NTFS resulted in a kernel crash.

We should check for valid STANDARD_INFORMATION attribute offset and length
before trying to access it

Link: https://lkml.kernel.org/r/20210217155930.1506815-1-rkovhaev@gmail.com
Link: https://syzkaller.appspot.com/bug?extid=c584225dabdea2f71969
Signed-off-by: Rustam Kovhaev <rkovhaev@gmail.com>
Reported-by: syzbot+c584225dabdea2f71969@syzkaller.appspotmail.com
Tested-by: syzbot+c584225dabdea2f71969@syzkaller.appspotmail.com
Acked-by: Anton Altaparmakov <anton@tuxera.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ceph: downgrade warning from mdsmap decode to debug

commit ccd1acdf1c49b835504b235461fd24e2ed826764 upstream.

While the MDS cluster is unstable and changing state the client may get
mdsmap updates that will trigger warnings:

  [144692.478400] ceph: mdsmap_decode got incorrect state(up:standby-replay)
  [144697.489552] ceph: mdsmap_decode got incorrect state(up:standby-replay)
  [144697.489580] ceph: mdsmap_decode got incorrect state(up:standby-replay)

This patch downgrades these warnings to debug, as they may flood the logs
if the cluster is unstable for a while.

Signed-off-by: Luis Henriques <lhenriques@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: quirks: add quirk to start video capture on ELMO L-12F document camera reliable

commit 1ebe718bb48278105816ba03a0408ecc2d6cf47f upstream.

Without this quirk starting a video capture from the device often fails with

kernel: uvcvideo: Failed to set UVC probe control : -110 (exp. 34).

Signed-off-by: Stefan Ursella <stefan.ursella@wolfvision.net>
Link: https://lore.kernel.org/r/20210210140713.18711-1-stefan.ursella@wolfvision.net
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: quirks: sort quirk entries

commit 43861d29c0810a70792bf69d37482efb7bb6677d upstream.

Move the last entry to its proper place to maintain the VID/PID sort
order.

Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210210111746.13360-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvme-rdma: Use ibdev_to_node instead of dereferencing ->dma_device

commit 22dd4c707673129ed17e803b4bf68a567b2731db upstream.

->dma_device is a private implementation detail of the RDMA core.  Use the
ibdev_to_node helper to get the NUMA node for a ib_device instead of
poking into ->dma_device.

Link: https://lore.kernel.org/r/20201106181941.1878556-5-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Krishnamraju Eraparaju <krishna2@chelsio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA: Lift ibdev_to_node from rds to common code

commit 8ecfca68dc4cbee1272a0161e3f2fb9387dc6930 upstream.

Lift the ibdev_to_node from rds to common code and document it.

Link: https://lore.kernel.org/r/20201106181941.1878556-4-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Krishnamraju Eraparaju <krishna2@chelsio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: make arrays usage and value to be the same

commit ed9be64eefe26d7d8b0b5b9fa3ffdf425d87a01f upstream.

The HID subsystem allows an "HID report field" to have a different
number of "values" and "usages" when it is allocated. When a field
struct is created, the size of the usage array is guaranteed to be at
least as large as the values array, but it may be larger. This leads to
a potential out-of-bounds write in
__hidinput_change_resolution_multipliers() and an out-of-bounds read in
hidinput_count_leds().

To fix this, let's make sure that both the usage and value arrays are
the same size.

Cc: stable@vger.kernel.org
Signed-off-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Fix truncation handling for mod32 dst reg wrt zero

commit 9b00f1b78809309163dda2d044d9e94a3c0248a3 upstream.

Recently noticed that when mod32 with a known src reg of 0 is performed,
then the dst register is 32-bit truncated in verifier:

  0: R1=ctx(id=0,off=0,imm=0) R10=fp0
  0: (b7) r0 = 0
  1: R0_w=inv0 R1=ctx(id=0,off=0,imm=0) R10=fp0
  1: (b7) r1 = -1
  2: R0_w=inv0 R1_w=inv-1 R10=fp0
  2: (b4) w2 = -1
  3: R0_w=inv0 R1_w=inv-1 R2_w=inv4294967295 R10=fp0
  3: (9c) w1 %= w0
  4: R0_w=inv0 R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2_w=inv4294967295 R10=fp0
  4: (b7) r0 = 1
  5: R0_w=inv1 R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2_w=inv4294967295 R10=fp0
  5: (1d) if r1 == r2 goto pc+1
   R0_w=inv1 R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2_w=inv4294967295 R10=fp0
  6: R0_w=inv1 R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2_w=inv4294967295 R10=fp0
  6: (b7) r0 = 2
  7: R0_w=inv2 R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2_w=inv4294967295 R10=fp0
  7: (95) exit
  7: R0=inv1 R1=inv(id=0,umin_value=4294967295,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2=inv4294967295 R10=fp0
  7: (95) exit

However, as a runtime result, we get 2 instead of 1, meaning the dst
register does not contain (u32)-1 in this case. The reason is fairly
straight forward given the 0 test leaves the dst register as-is:

  # ./bpftool p d x i 23
   0: (b7) r0 = 0
   1: (b7) r1 = -1
   2: (b4) w2 = -1
   3: (16) if w0 == 0x0 goto pc+1
   4: (9c) w1 %= w0
   5: (b7) r0 = 1
   6: (1d) if r1 == r2 goto pc+1
   7: (b7) r0 = 2
   8: (95) exit

This was originally not an issue given the dst register was marked as
completely unknown (aka 64 bit unknown). However, after 468f6eafa6c4
("bpf: fix 32-bit ALU op verification") the verifier casts the register
output to 32 bit, and hence it becomes 32 bit unknown. Note that for
the case where the src register is unknown, the dst register is marked
64 bit unknown. After the fix, the register is truncated by the runtime
and the test passes:

  # ./bpftool p d x i 23
   0: (b7) r0 = 0
   1: (b7) r1 = -1
   2: (b4) w2 = -1
   3: (16) if w0 == 0x0 goto pc+2
   4: (9c) w1 %= w0
   5: (05) goto pc+1
   6: (bc) w1 = w1
   7: (b7) r0 = 1
   8: (1d) if r1 == r2 goto pc+1
   9: (b7) r0 = 2
  10: (95) exit

Semantics also match with {R,W}x mod{64,32} 0 -> {R,W}x. Invalid div
has always been {R,W}x div{64,32} 0 -> 0. Rewrites are as follows:

  mod32:                            mod64:

  (16) if w0 == 0x0 goto pc+2       (15) if r0 == 0x0 goto pc+1
  (9c) w1 %= w0                     (9f) r1 %= r0
  (05) goto pc+1
  (bc) w1 = w1

Fixes: 468f6eafa6c4 ("bpf: fix 32-bit ALU op verification")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.10.18

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Igor Matheus Andrade Torrente <igormtorrente@gmail.com>
Tested-by: Jason Self <jason@bluehome.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20210222121019.444399883@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: pwc: Use correct device for DMA

commit 69c9e825e812ec6d663e64ebf14bd3bc7f37e2c7 upstream.

This fixes the following newly introduced warning:

[   15.518253] ------------[ cut here ]------------
[   15.518941] WARNING: CPU: 0 PID: 246 at kernel/dma/mapping.c:149 dma_map_page_attrs+0x1a8/0x1d0
[   15.520634] Modules linked in: pwc videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc efivarfs
[   15.522335] CPU: 0 PID: 246 Comm: v4l2-test Not tainted 5.11.0-rc1+ #1
[   15.523281] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
[   15.524438] RIP: 0010:dma_map_page_attrs+0x1a8/0x1d0
[   15.525135] Code: 10 5b 5d 41 5c 41 5d c3 4d 89 d0 eb d7 4d 89 c8 89 e9 48 89 da e8 68 29 00 00 eb d1 48 89 f2 48 2b 50 18 48 89 d0 eb 83 0f 0b <0f> 0b 48 c7 c0 ff ff ff ff eb b8 48 89 d9 48 8b 40 40 e8 61 69 d2
[   15.527938] RSP: 0018:ffffa2694047bca8 EFLAGS: 00010246
[   15.528716] RAX: 0000000000000000 RBX: 0000000000002580 RCX: 0000000000000000
[   15.529782] RDX: 0000000000000000 RSI: ffffcdce000ecc00 RDI: ffffa0b4bdb888a0
[   15.530849] RBP: 0000000000000002 R08: 0000000000000002 R09: 0000000000000000
[   15.531881] R10: 0000000000000004 R11: 000000000002d8c0 R12: 0000000000000000
[   15.532911] R13: ffffa0b4bdb88800 R14: ffffa0b483820000 R15: ffffa0b4bdb888a0
[   15.533942] FS:  00007fc5fbb5e4c0(0000) GS:ffffa0b4fc000000(0000) knlGS:0000000000000000
[   15.535141] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   15.535988] CR2: 00007fc5fb6ea138 CR3: 0000000003812000 CR4: 00000000001506f0
[   15.537025] Call Trace:
[   15.537425]  start_streaming+0x2e9/0x4b0 [pwc]
[   15.538143]  vb2_start_streaming+0x5e/0x110 [videobuf2_common]
[   15.538989]  vb2_core_streamon+0x107/0x140 [videobuf2_common]
[   15.539831]  __video_do_ioctl+0x18f/0x4a0 [videodev]
[   15.540670]  video_usercopy+0x13a/0x5b0 [videodev]
[   15.541349]  ? video_put_user+0x230/0x230 [videodev]
[   15.542096]  ? selinux_file_ioctl+0x143/0x200
[   15.542752]  v4l2_ioctl+0x40/0x50 [videodev]
[   15.543360]  __x64_sys_ioctl+0x89/0xc0
[   15.543930]  do_syscall_64+0x33/0x40
[   15.544448]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   15.545236] RIP: 0033:0x7fc5fb671587
[   15.545780] Code: b3 66 90 48 8b 05 11 49 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e1 48 2c 00 f7 d8 64 89 01 48
[   15.548486] RSP: 002b:00007fff0f71f038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[   15.549578] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fc5fb671587
[   15.550664] RDX: 00007fff0f71f060 RSI: 0000000040045612 RDI: 0000000000000003
[   15.551706] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[   15.552738] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff0f71f060
[   15.553817] R13: 00007fff0f71f1d0 R14: 0000000000de1270 R15: 0000000000000000
[   15.554914] ---[ end trace 7be03122966c2486 ]---

Fixes: 1161db6776bd ("media: usb: pwc: Don't use coherent DMA buffers for ISO transfer")
Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix crash after non-aligned direct IO write with O_DSYNC

Whenever we attempt to do a non-aligned direct IO write with O_DSYNC, we
end up triggering an assertion and crashing. Example reproducer:

  $ cat test.sh
  #!/bin/bash

  DEV=/dev/sdj
  MNT=/mnt/sdj

  mkfs.btrfs -f $DEV > /dev/null
  mount $DEV $MNT

  # Do a direct IO write with O_DSYNC into a non-aligned range...
  xfs_io -f -d -s -c "pwrite -S 0xab -b 64K 1111 64K" $MNT/foobar

  umount $MNT

When running the reproducer an assertion fails and produces the following
trace:

  [ 2418.403134] assertion failed: !current->journal_info || flush != BTRFS_RESERVE_FLUSH_DATA, in fs/btrfs/space-info.c:1467
  [ 2418.403745] ------------[ cut here ]------------
  [ 2418.404306] kernel BUG at fs/btrfs/ctree.h:3286!
  [ 2418.404862] invalid opcode: 0000 [#2] PREEMPT SMP DEBUG_PAGEALLOC PTI
  [ 2418.405451] CPU: 1 PID: 64705 Comm: xfs_io Tainted: G      D           5.10.15-btrfs-next-87 #1
  [ 2418.406026] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
  [ 2418.407228] RIP: 0010:assertfail.constprop.0+0x18/0x26 [btrfs]
  [ 2418.407835] Code: e6 48 c7 (...)
  [ 2418.409078] RSP: 0018:ffffb06080d13c98 EFLAGS: 00010246
  [ 2418.409696] RAX: 000000000000006c RBX: ffff994c1debbf08 RCX: 0000000000000000
  [ 2418.410302] RDX: 0000000000000000 RSI: 0000000000000027 RDI: 00000000ffffffff
  [ 2418.410904] RBP: ffff994c21770000 R08: 0000000000000000 R09: 0000000000000000
  [ 2418.411504] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000010000
  [ 2418.412111] R13: ffff994c22198400 R14: ffff994c21770000 R15: 0000000000000000
  [ 2418.412713] FS:  00007f54fd7aff00(0000) GS:ffff994d35200000(0000) knlGS:0000000000000000
  [ 2418.413326] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [ 2418.413933] CR2: 000056549596d000 CR3: 000000010b928003 CR4: 0000000000370ee0
  [ 2418.414528] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  [ 2418.415109] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  [ 2418.415669] Call Trace:
  [ 2418.416254]  btrfs_reserve_data_bytes.cold+0x22/0x22 [btrfs]
  [ 2418.416812]  btrfs_check_data_free_space+0x4c/0xa0 [btrfs]
  [ 2418.417380]  btrfs_buffered_write+0x1b0/0x7f0 [btrfs]
  [ 2418.418315]  btrfs_file_write_iter+0x2a9/0x770 [btrfs]
  [ 2418.418920]  new_sync_write+0x11f/0x1c0
  [ 2418.419430]  vfs_write+0x2bb/0x3b0
  [ 2418.419972]  __x64_sys_pwrite64+0x90/0xc0
  [ 2418.420486]  do_syscall_64+0x33/0x80
  [ 2418.420979]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
  [ 2418.421486] RIP: 0033:0x7f54fda0b986
  [ 2418.421981] Code: 48 c7 c0 (...)
  [ 2418.423019] RSP: 002b:00007ffc40569c38 EFLAGS: 00000246 ORIG_RAX: 0000000000000012
  [ 2418.423547] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f54fda0b986
  [ 2418.424075] RDX: 0000000000010000 RSI: 000056549595e000 RDI: 0000000000000003
  [ 2418.424596] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000400
  [ 2418.425119] R10: 0000000000000400 R11: 0000000000000246 R12: 00000000ffffffff
  [ 2418.425644] R13: 0000000000000400 R14: 0000000000010000 R15: 0000000000000000
  [ 2418.426148] Modules linked in: btrfs blake2b_generic (...)
  [ 2418.429540] ---[ end trace ef2aeb44dc0afa34 ]---

1) At btrfs_file_write_iter() we set current->journal_info to
   BTRFS_DIO_SYNC_STUB;

2) We then call __btrfs_direct_write(), which calls btrfs_direct_IO();

3) We can't do the direct IO write because it starts at a non-aligned
   offset (1111). So at btrfs_direct_IO() we return -EINVAL (coming from
   check_direct_IO() which does the alignment check), but we leave
   current->journal_info set to BTRFS_DIO_SYNC_STUB - we only clear it
   at btrfs_dio_iomap_begin(), because we assume we always get there;

4) Then at __btrfs_direct_write() we see that the attempt to do the
   direct IO write was not successful, 0 bytes written, so we fallback
   to a buffered write by calling btrfs_buffered_write();

5) There we call btrfs_check_data_free_space() which in turn calls
   btrfs_alloc_data_chunk_ondemand() and that calls
   btrfs_reserve_data_bytes() with flush == BTRFS_RESERVE_FLUSH_DATA;

6) Then at btrfs_reserve_data_bytes() we have current->journal_info set to
   BTRFS_DIO_SYNC_STUB, therefore not NULL, and flush has the value
   BTRFS_RESERVE_FLUSH_DATA, triggering the second assertion:

  int btrfs_reserve_data_bytes(struct btrfs_fs_info *fs_info, u64 bytes,
                               enum btrfs_reserve_flush_enum flush)
  {
      struct btrfs_space_info *data_sinfo = fs_info->data_sinfo;
      int ret;

      ASSERT(flush == BTRFS_RESERVE_FLUSH_DATA ||
             flush == BTRFS_RESERVE_FLUSH_FREE_SPACE_INODE);
      ASSERT(!current->journal_info || flush != BTRFS_RESERVE_FLUSH_DATA);
  (...)

So fix that by setting the journal to NULL whenever check_direct_IO()
returns a failure.

This bug only affects 5.10 kernels, and the regression was introduced in
5.10-rc1 by commit 0eb79294dbe328 ("btrfs: dio iomap DSYNC workaround").
The bug does not exist in 5.11 kernels due to commit ecfdc08b8cc65d
("btrfs: remove dio iomap DSYNC workaround"), which depends on a large
patchset that went into the merge window for 5.11. So this is a fix only
for 5.10.x stable kernels, as there are people hitting this bug.

Fixes: 0eb79294dbe328 ("btrfs: dio iomap DSYNC workaround")
CC: stable@vger.kernel.org # 5.10 (and only 5.10)
Acked-by: David Sterba <dsterba@suse.com>
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1181605
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix backport of 2175bf57dc952 in 5.10.13

There's a mistake in backport of upstream commit 2175bf57dc95 ("btrfs:
fix possible free space tree corruption with online conversion") as
5.10.13 commit 2175bf57dc95.

The enum value BTRFS_FS_FREE_SPACE_TREE_UNTRUSTED has been added to the
wrong enum set, colliding with value of BTRFS_FS_QUOTA_ENABLE. This
could cause problems during the tree conversion, where the quotas
wouldn't be set up properly but the related code executed anyway due to
the bit set.

Link: https://lore.kernel.org/linux-btrfs/20210219111741.95DD.409509F4@e16-tech.com
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
CC: stable@vger.kernel.org # 5.10.13+
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: btusb: Always fallback to alt 1 for WBS

commit 517b693351a2d04f3af1fc0e506ac7e1346094de upstream.

When alt mode 6 is not available, fallback to the kernel <= 5.7 behavior
of always using alt mode 1.

Prior to kernel 5.8, btusb would always use alt mode 1 for WBS (Wide
Band Speech aka mSBC aka transparent SCO).  In commit baac6276c0a9
("Bluetooth: btusb: handle mSBC audio over USB Endpoints") this
was changed to use alt mode 6, which is the recommended mode in the
Bluetooth spec (Specifications of the Bluetooth System, v5.0, Vol 4.B
§2.2.1).  However, many if not most BT USB adapters do not support alt
mode 6.  In fact, I have been unable to find any which do.

In kernel 5.8, this was changed to use alt mode 6, and if not available,
use alt mode 0.  But mode 0 has a zero byte max packet length and can
not possibly work.  It is just there as a zero-bandwidth dummy mode to
work around a USB flaw that would prevent device enumeration if
insufficient bandwidth were available for the lowest isoc mode
supported.

In effect, WBS was broken for all USB-BT adapters that do not support
alt 6, which appears to nearly all of them.

Then in commit 461f95f04f19 ("Bluetooth: btusb: USB alternate setting 1 for
WBS") the 5.7 behavior was restored, but only for Realtek adapters.

I've tested a Broadcom BRCM20702A and CSR 8510 adapter, both work with
the 5.7 behavior and do not with the 5.8.

So get rid of the Realtek specific flag and use the 5.7 behavior for all
adapters as a fallback when alt 6 is not available.  This was the
kernel's behavior prior to 5.8 and I can find no adapters for which it
is not correct.  And even if there is an adapter for which this does not
work, the current behavior would be to fall back to alt 0, which can not
possibly work either, and so is no better.

Signed-off-by: Trent Piepho <tpiepho@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Salvatore Bonaccorso <carnil@debian.org>
Cc: Sjoerd Simons <sjoerd@luon.net>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: protect tty_write from odd low-level tty disciplines

commit 3342ff2698e9720f4040cc458a2744b2b32f5c3a upstream.

Al root-caused a new warning from syzbot to the ttyprintk tty driver
returning a write count larger than the data the tty layer actually gave
it.  Which confused the tty write code mightily, and with the new
iov_iter based code, caused a WARNING in iov_iter_revert().

syzbot correctly bisected the source of the new warning to commit
9bb48c82aced ("tty: implement write_iter"), but the oddity goes back
much further, it just didn't get caught by anything before.

Reported-by: syzbot+3d2c27c2b7dc2a94814d@syzkaller.appspotmail.com
Fixes: 9bb48c82aced ("tty: implement write_iter")
Debugged-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-blkback: fix error handling in xen_blkbk_map()

commit 871997bc9e423f05c7da7c9178e62dde5df2a7f8 upstream.

The function uses a goto-based loop, which may lead to an earlier error
getting discarded by a later iteration. Exit this ad-hoc loop when an
error was encountered.

The out-of-memory error path additionally fails to fill a structure
field looked at by xen_blkbk_unmap_prepare() before inspecting the
handle which does get properly set (to BLKBACK_INVALID_HANDLE).

Since the earlier exiting from the ad-hoc loop requires the same field
filling (invalidation) as that on the out-of-memory path, fold both
paths. While doing so, drop the pr_alert(), as extra log messages aren't
going to help the situation (the kernel will log oom conditions already
anyway).

This is XSA-365.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <julien@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-scsiback: don't "handle" error by BUG()

commit 7c77474b2d22176d2bfb592ec74e0f2cb71352c9 upstream.

In particular -ENOMEM may come back here, from set_foreign_p2m_mapping().
Don't make problems worse, the more that handling elsewhere (together
with map's status fields now indicating whether a mapping wasn't even
attempted, and hence has to be considered failed) doesn't require this
odd way of dealing with errors.

This is part of XSA-362.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-netback: don't "handle" error by BUG()

commit 3194a1746e8aabe86075fd3c5e7cf1f4632d7f16 upstream.

In particular -ENOMEM may come back here, from set_foreign_p2m_mapping().
Don't make problems worse, the more that handling elsewhere (together
with map's status fields now indicating whether a mapping wasn't even
attempted, and hence has to be considered failed) doesn't require this
odd way of dealing with errors.

This is part of XSA-362.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-blkback: don't "handle" error by BUG()

commit 5a264285ed1cd32e26d9de4f3c8c6855e467fd63 upstream.

In particular -ENOMEM may come back here, from set_foreign_p2m_mapping().
Don't make problems worse, the more that handling elsewhere (together
with map's status fields now indicating whether a mapping wasn't even
attempted, and hence has to be considered failed) doesn't require this
odd way of dealing with errors.

This is part of XSA-362.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/arm: don't ignore return errors from set_phys_to_machine

commit 36bf1dfb8b266e089afa9b7b984217f17027bf35 upstream.

set_phys_to_machine can fail due to lack of memory, see the kzalloc call
in arch/arm/xen/p2m.c:__set_phys_to_machine_multi.

Don't ignore the potential return error in set_foreign_p2m_mapping,
returning it to the caller instead.

This is part of XSA-361.

Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Cc: stable@vger.kernel.org
Reviewed-by: Julien Grall <jgrall@amazon.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Xen/gntdev: correct error checking in gntdev_map_grant_pages()

commit ebee0eab08594b2bd5db716288a4f1ae5936e9bc upstream.

Failure of the kernel part of the mapping operation should also be
indicated as an error to the caller, or else it may assume the
respective kernel VA is okay to access.

Furthermore gnttab_map_refs() failing still requires recording
successfully mapped handles, so they can be unmapped subsequently. This
in turn requires there to be a way to tell full hypercall failure from
partial success - preset map_op status fields such that they won't
"happen" to look as if the operation succeeded.

Also again use GNTST_okay instead of implying its value (zero).

This is part of XSA-361.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Xen/gntdev: correct dev_bus_addr handling in gntdev_map_grant_pages()

commit dbe5283605b3bc12ca45def09cc721a0a5c853a2 upstream.

We may not skip setting the field in the unmap structure when
GNTMAP_device_map is in use - such an unmap would fail to release the
respective resources (a page ref in the hypervisor). Otoh the field
doesn't need setting at all when GNTMAP_device_map is not in use.

To record the value for unmapping, we also better don't use our local
p2m: In particular after a subsequent change it may not have got updated
for all the batch elements. Instead it can simply be taken from the
respective map's results.

We can additionally avoid playing this game altogether for the kernel
part of the mappings in (x86) PV mode.

This is part of XSA-361.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Xen/x86: also check kernel mapping in set_foreign_p2m_mapping()

commit b512e1b077e5ccdbd6e225b15d934ab12453b70a upstream.

We should not set up further state if either mapping failed; paying
attention to just the user mapping's status isn't enough.

Also use GNTST_okay instead of implying its value (zero).

This is part of XSA-361.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Xen/x86: don't bail early from clear_foreign_p2m_mapping()

commit a35f2ef3b7376bfd0a57f7844bd7454389aae1fc upstream.

Its sibling (set_foreign_p2m_mapping()) as well as the sibling of its
only caller (gnttab_map_refs()) don't clean up after themselves in case
of error. Higher level callers are expected to do so. However, in order
for that to really clean up any partially set up state, the operation
should not terminate upon encountering an entry in unexpected state. It
is particularly relevant to notice here that set_foreign_p2m_mapping()
would skip setting up a p2m entry if its grant mapping failed, but it
would continue to set up further p2m entries as long as their mappings
succeeded.

Arguably down the road set_foreign_p2m_mapping() may want its page state
related WARN_ON() also converted to an error return.

This is part of XSA-361.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: fix proc_fs init handling in af_packet and tls

[ Upstream commit a268e0f2455c32653140775662b40c2b1f1b2efa ]

proc_fs was used, in af_packet, without a surrounding #ifdef,
although there is no hard dependency on proc_fs.
That caused the initialization of the af_packet module to fail
when CONFIG_PROC_FS=n.

Specifically, proc_create_net() was used in af_packet.c,
and when it fails, packet_net_init() returns -ENOMEM.
It will always fail when the kernel is compiled without proc_fs,
because, proc_create_net() for example always returns NULL.

The calling order that starts in af_packet.c is as follows:
packet_init()
register_pernet_subsys()
register_pernet_operations()
__register_pernet_operations()
ops_init()
ops->init() (packet_net_ops.init=packet_net_init())
proc_create_net()

It worked in the past because register_pernet_subsys()'s return value
wasn't checked before this Commit 36096f2f4fa0 ("packet: Fix error path in
packet_init.").
It always returned an error, but was not checked before, so everything
was working even when CONFIG_PROC_FS=n.

The fix here is simply to add the necessary #ifdef.

This also fixes a similar error in tls_proc.c, that was found by Jakub
Kicinski.

Fixes: d26b698dd3cd ("net/tls: add skeleton of MIB statistics")
Fixes: 36096f2f4fa0 ("packet: Fix error path in packet_init")
Signed-off-by: Yonatan Linik <yonatanlinik@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: bridge: Fix a warning when del bridge sysfs

[ Upstream commit 989a1db06eb18ff605377eec87e18d795e0ec74b ]

I got a warining report:

br_sysfs_addbr: can't create group bridge4/bridge
------------[ cut here ]------------
sysfs group 'bridge' not found for kobject 'bridge4'
WARNING: CPU: 2 PID: 9004 at fs/sysfs/group.c:279 sysfs_remove_group fs/sysfs/group.c:279 [inline]
WARNING: CPU: 2 PID: 9004 at fs/sysfs/group.c:279 sysfs_remove_group+0x153/0x1b0 fs/sysfs/group.c:270
Modules linked in: iptable_nat
...
Call Trace:
  br_dev_delete+0x112/0x190 net/bridge/br_if.c:384
  br_dev_newlink net/bridge/br_netlink.c:1381 [inline]
  br_dev_newlink+0xdb/0x100 net/bridge/br_netlink.c:1362
  __rtnl_newlink+0xe11/0x13f0 net/core/rtnetlink.c:3441
  rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3500
  rtnetlink_rcv_msg+0x385/0x980 net/core/rtnetlink.c:5562
  netlink_rcv_skb+0x134/0x3d0 net/netlink/af_netlink.c:2494
  netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline]
  netlink_unicast+0x4a0/0x6a0 net/netlink/af_netlink.c:1330
  netlink_sendmsg+0x793/0xc80 net/netlink/af_netlink.c:1919
  sock_sendmsg_nosec net/socket.c:651 [inline]
  sock_sendmsg+0x139/0x170 net/socket.c:671
  ____sys_sendmsg+0x658/0x7d0 net/socket.c:2353
  ___sys_sendmsg+0xf8/0x170 net/socket.c:2407
  __sys_sendmsg+0xd3/0x190 net/socket.c:2440
  do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

In br_device_event(), if the bridge sysfs fails to be added,
br_device_event() should return error. This can prevent warining
when removing bridge sysfs that do not exist.

Fixes: bb900b27a2f4 ("bridge: allow creating bridge devices with netlink")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Tested-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/20201211122921.40386-1-wanghai38@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: openvswitch: fix TTL decrement exception action execution

[ Upstream commit 09d6217254c004f6237cc2c2bfe604af58e9a8c5 ]

Currently, the exception actions are not processed correctly as the wrong
dataset is passed. This change fixes this, including the misleading
comment.

In addition, a check was added to make sure we work on an IPv4 packet,
and not just assume if it's not IPv6 it's IPv4.

This was all tested using OVS with patch,
https://patchwork.ozlabs.org/project/openvswitch/list/?series=21639,
applied and sending packets with a TTL of 1 (and 0), both with IPv4
and IPv6.

Fixes: 69929d4c49e1 ("net: openvswitch: fix TTL decrement action netlink message format")
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/160733569860.3007.12938188180387116741.stgit@wsfd-netdev64.ntdv.lab.eng.bos.redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sched: incorrect Kconfig dependencies on Netfilter modules

[ Upstream commit 102e2c07239c07144d9c7338ec09b9d47f2e5f79 ]

- NET_ACT_CONNMARK and NET_ACT_CTINFO only require conntrack support.
- NET_ACT_IPT only requires NETFILTER_XTABLES symbols, not
  IP_NF_IPTABLES. After this patch, NET_ACT_IPT becomes consistent
  with NET_EMATCH_IPT. NET_ACT_IPT dependency on IP_NF_IPTABLES predates
  Linux-2.6.12-rc2 (initial git repository build).

Fixes: 22a5dc0e5e3e ("net: sched: Introduce connmark action")
Fixes: 24ec483cec98 ("net: sched: Introduce act_ctinfo action")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://lore.kernel.org/r/20201208204707.11268-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7615: fix rdd mcu cmd endianness

[ Upstream commit 0211c282bc8aaa15343aadbc6e23043e7057f77d ]

Similar to mt7915 driver, fix mt7615 radar mcu command endianness

Fixes: 2ce73efe0f8e5 ("mt76: mt7615: initialize radar specs from host driver")
Fixes: 70911d9638069 ("mt76: mt7615: add radar pattern test knob to debugfs")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7915: fix endian issues

[ Upstream commit cee236e1489ecca9d23d6ce6f60d126cc651a5ba ]

Multiple MCU messages were using u16/u32 fields without endian annotations
or conversions

Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Fixes: 5517f78b0063 ("mt76: mt7915: enable firmware module debug support")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/sched: fix miss init the mru in qdisc_skb_cb

[ Upstream commit aadaca9e7c392dbf877af8cefb156199f1a67bbe ]

The mru in the qdisc_skb_cb should be init as 0. Only defrag packets in the
act_ct will set the value.

Fixes: 038ebb1a713d ("net/sched: act_ct: fix miss set mru for ovs after defrag in act_ct")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mptcp: skip to next candidate if subflow has unacked data

[ Upstream commit 860975c6f80adae9d2c7654bde04a99dd28bc94f ]

In case a subflow path is blocked, MPTCP-level retransmit may not take
place anymore because such subflow is likely to have unacked data left
in its write queue.

Ignore subflows that have experienced loss and test next candidate.

Fixes: 3b1d6210a95773691 ("mptcp: implement and use MPTCP-level retransmission")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: qrtr: Fix port ID for control messages

[ Upstream commit ae068f561baa003d260475c3e441ca454b186726 ]

The port ID for control messages was uncorrectly set with broadcast
node ID value, causing message to be dropped on remote side since
not passing packet filtering (cb->dst_port != QRTR_PORT_CTRL).

Fixes: d27e77a3de28 ("net: qrtr: Reset the node and port ID of broadcast messages")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/isert: add module param to set sg_tablesize for IO cmd

[ Upstream commit dae7a75f1f19bffb579daf148f8d8addd2726772 ]

Currently, iser target support max IO size of 16MiB by default. For some
adapters, allocating this amount of resources might reduce the total
number of possible connections that can be created. For those adapters,
it's preferred to reduce the max IO size to be able to create more
connections. Since there is no handshake procedure for max IO size in iser
protocol, set the default max IO size to 1MiB and add a module parameter
for enabling the option to control it for suitable adapters.

Fixes: 317000b926b0 ("IB/isert: allocate RW ctxs according to max IO size")
Link: https://lore.kernel.org/r/20201019094628.17202-1-mgurtovoy@nvidia.com
Reported-by: Krishnamraju Eraparaju <krishna2@chelsio.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vdpa_sim: add get_config callback in vdpasim_dev_attr

commit 65b709586e222fa6ffd4166ac7fdb5d5dad113ee upstream.

The get_config callback can be used by the device to fill the
config structure.
The callback will be invoked in vdpasim_get_config() before copying
bytes into caller buffer.

Move vDPA-net config updates from vdpasim_set_features() in the
new vdpasim_net_get_config() callback.
This is safe since in vdpa_get_config() we already check that
.set_features() callback is called before .get_config().

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201215144256.155342-13-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vdpa_sim: make 'config' generic and usable for any device type

commit f37cbbc65178e0a45823d281d290c4c02da9631c upstream.

Add new 'config_size' attribute in 'vdpasim_dev_attr' and allocates
'config' dynamically to support any device types.

Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201215144256.155342-12-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vdpa_sim: store parsed MAC address in a buffer

commit cf1a3b35382c10ce315c32bd2b3d7789897fbe13 upstream.

As preparation for the next patches, we store the MAC address,
parsed during the vdpasim_create(), in a buffer that will be used
to fill 'config' together with other configurations.

Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201215144256.155342-11-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vdpa_sim: add struct vdpasim_dev_attr for device attributes

commit 6c6e28fe45794054410ad8cd2770af69fbe0338d upstream.

vdpasim_dev_attr will contain device specific attributes. We starting
moving the number of virtqueues (i.e. nvqs) to vdpasim_dev_attr.

vdpasim_create() creates a new vDPA simulator following the device
attributes defined in the vdpasim_dev_attr parameter.

Co-developed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201215144256.155342-7-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vdpa_sim: remove hard-coded virtq count

commit 423248d60d2b655321fc49eca1545f95a1bc9d6c upstream.

Add a new attribute that will define the number of virt queues to be
created for the vdpasim device.

Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
[sgarzare: replace kmalloc_array() with kcalloc()]
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201215144256.155342-4-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.10.17

Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Jason Self <jason@bluehome.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Ross Schmidt <ross.schm.dev@gmail.com>
Link: https://lore.kernel.org/r/20210215152719.459796636@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kcov, usb: only collect coverage from __usb_hcd_giveback_urb in softirq

commit aee9ddb1d3718d3ba05b50c51622d7792ae749c9 upstream.

Currently there's a KCOV remote coverage collection section in
__usb_hcd_giveback_urb(). Initially that section was added based on the
assumption that usb_hcd_giveback_urb() can only be called in interrupt
context as indicated by a comment before it. This is what happens when
syzkaller is fuzzing the USB stack via the dummy_hcd driver.

As it turns out, it's actually valid to call usb_hcd_giveback_urb() in task
context, provided that the caller turned off the interrupts; USB/IP does
exactly that. This can lead to a nested KCOV remote coverage collection
sections both trying to collect coverage in task context. This isn't
supported by KCOV, and leads to a WARNING.

Change __usb_hcd_giveback_urb() to only call kcov_remote_*() callbacks
when it's being executed in a softirq. As the result, the coverage from
USB/IP related usb_hcd_giveback_urb() calls won't be collected, but the
WARNING is fixed.

A potential future improvement would be to support nested remote coverage
collection sections, but this patch doesn't address that.

Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Link: https://lore.kernel.org/r/f3a7a153f0719cb53ec385b16e912798bd3e4cf9.1602856358.git.andreyknvl@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ovl: expand warning in ovl_d_real()

commit cef4cbff06fbc3be54d6d79ee139edecc2ee8598 upstream.

There was a syzbot report with this warning but insufficient information...

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/qrtr: restrict user-controlled length in qrtr_tun_write_iter()

commit 2a80c15812372e554474b1dba0b1d8e467af295d upstream.

syzbot found WARNING in qrtr_tun_write_iter [1] when write_iter length
exceeds KMALLOC_MAX_SIZE causing order >= MAX_ORDER condition.

Additionally, there is no check for 0 length write.

[1]
WARNING: mm/page_alloc.c:5011
[..]
Call Trace:
 alloc_pages_current+0x18c/0x2a0 mm/mempolicy.c:2267
 alloc_pages include/linux/gfp.h:547 [inline]
 kmalloc_order+0x2e/0xb0 mm/slab_common.c:837
 kmalloc_order_trace+0x14/0x120 mm/slab_common.c:853
 kmalloc include/linux/slab.h:557 [inline]
 kzalloc include/linux/slab.h:682 [inline]
 qrtr_tun_write_iter+0x8a/0x180 net/qrtr/tun.c:83
 call_write_iter include/linux/fs.h:1901 [inline]

Reported-by: syzbot+c2a7e5c5211605a90865@syzkaller.appspotmail.com
Signed-off-by: Sabyrzhan Tasbolatov <snovitoll@gmail.com>
Link: https://lore.kernel.org/r/20210202092059.1361381-1-snovitoll@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/rds: restrict iovecs length for RDS_CMSG_RDMA_ARGS

commit a11148e6fcce2ae53f47f0a442d098d860b4f7db upstream.

syzbot found WARNING in rds_rdma_extra_size [1] when RDS_CMSG_RDMA_ARGS
control message is passed with user-controlled
0x40001 bytes of args->nr_local, causing order >= MAX_ORDER condition.

The exact value 0x40001 can be checked with UIO_MAXIOV which is 0x400.
So for kcalloc() 0x400 iovecs with sizeof(struct rds_iovec) = 0x10
is the closest limit, with 0x10 leftover.

Same condition is currently done in rds_cmsg_rdma_args().

[1] WARNING: mm/page_alloc.c:5011
[..]
Call Trace:
 alloc_pages_current+0x18c/0x2a0 mm/mempolicy.c:2267
 alloc_pages include/linux/gfp.h:547 [inline]
 kmalloc_order+0x2e/0xb0 mm/slab_common.c:837
 kmalloc_order_trace+0x14/0x120 mm/slab_common.c:853
 kmalloc_array include/linux/slab.h:592 [inline]
 kcalloc include/linux/slab.h:621 [inline]
 rds_rdma_extra_size+0xb2/0x3b0 net/rds/rdma.c:568
 rds_rm_size net/rds/send.c:928 [inline]

Reported-by: syzbot+1bd2b07f93745fa38425@syzkaller.appspotmail.com
Signed-off-by: Sabyrzhan Tasbolatov <snovitoll@gmail.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Link: https://lore.kernel.org/r/20210201203233.1324704-1-snovitoll@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vsock: fix locking in vsock_shutdown()

commit 1c5fae9c9a092574398a17facc31c533791ef232 upstream.

In vsock_shutdown() we touched some socket fields without holding the
socket lock, such as 'state' and 'sk_flags'.

Also, after the introduction of multi-transport, we are accessing
'vsk->transport' in vsock_send_shutdown() without holding the lock
and this call can be made while the connection is in progress, so
the transport can change in the meantime.

To avoid issues, we hold the socket lock when we enter in
vsock_shutdown() and release it when we leave.

Among the transports that implement the 'shutdown' callback, only
hyperv_transport acquired the lock. Since the caller now holds it,
we no longer take it.

Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vsock/virtio: update credit only if socket is not closed

commit ce7536bc7398e2ae552d2fabb7e0e371a9f1fe46 upstream.

If the socket is closed or is being released, some resources used by
virtio_transport_space_update() such as 'vsk->trans' may be released.

To avoid a use after free bug we should only update the available credit
when we are sure the socket is still open and we have the lock held.

Fixes: 06a8fc78367d ("VSOCK: Introduce virtio_vsock_common.ko")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20210208144454.84438-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

switchdev: mrp: Remove SWITCHDEV_ATTR_ID_MRP_PORT_STAT

commit 059d2a1004981dce19f0127dabc1b4ec927d202a upstream.

Now that MRP started to use also SWITCHDEV_ATTR_ID_PORT_STP_STATE to
notify HW, then SWITCHDEV_ATTR_ID_MRP_PORT_STAT is not used anywhere
else, therefore we can remove it.

Fixes: c284b545900830 ("switchdev: mrp: Extend switchdev API to offload MRP")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bridge: mrp: Fix the usage of br_mrp_port_switchdev_set_state

commit b2bdba1cbc84cadb14393d0101a5bfd38d342e0a upstream.

The function br_mrp_port_switchdev_set_state was called both with MRP
port state and STP port state, which is an issue because they don't
match exactly.

Therefore, update the function to be used only with STP port state and
use the id SWITCHDEV_ATTR_ID_PORT_STP_STATE.

The choice of using STP over MRP is that the drivers already implement
SWITCHDEV_ATTR_ID_PORT_STP_STATE and already in SW we update the port
STP state.

Fixes: 9a9f26e8f7ea30 ("bridge: mrp: Connect MRP API with the switchdev API")
Fixes: fadd409136f0f2 ("bridge: switchdev: mrp: Implement MRP API for switchdev")
Fixes: 2f1a11ae11d222 ("bridge: mrp: Add MRP interface.")
Reported-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: watchdog: hold device global xmit lock during tx disable

commit 3aa6bce9af0e25b735c9c1263739a5639a336ae8 upstream.

Prevent netif_tx_disable() running concurrently with dev_watchdog() by
taking the device global xmit lock. Otherwise, the recommended:

netif_carrier_off(dev);
netif_tx_disable(dev);

driver shutdown sequence can happen after the watchdog has already
checked carrier, resulting in possible false alarms. This is because
netif_tx_lock() only sets the frozen bit without maintaining the locks
on the individual queues.

Fixes: c3f26a269c24 ("netdev: Fix lockdep warnings in multiqueue configurations.")
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/vmw_vsock: improve locking in vsock_connect_timeout()

commit 3d0bc44d39bca615b72637e340317b7899b7f911 upstream.

A possible locking issue in vsock_connect_timeout() was recognized by
Eric Dumazet which might cause a null pointer dereference in
vsock_transport_cancel_pkt(). This patch assures that
vsock_transport_cancel_pkt() will be called within the lock, so a race
condition won't occur which could result in vsk->transport to be set to NULL.

Fixes: 380feae0def7 ("vsock: cancel packets when failing to connect")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Norbert Slusarek <nslusarek@gmx.net>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/trinity-f8e0937a-cf0e-4d80-a76e-d9a958ba3ef1-1612535522360@3c-app-gmx-bap12
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/vmw_vsock: fix NULL pointer dereference

commit 5d1cbcc990f18edaddddef26677073c4e6fad7b7 upstream.

In vsock_stream_connect(), a thread will enter schedule_timeout().
While being scheduled out, another thread can enter vsock_stream_connect()
as well and set vsk->transport to NULL. In case a signal was sent, the
first thread can leave schedule_timeout() and vsock_transport_cancel_pkt()
will be called right after. Inside vsock_transport_cancel_pkt(), a null
dereference will happen on transport->cancel_pkt.

Fixes: c0cfa2d8a788 ("vsock: add multi-transports support")
Signed-off-by: Norbert Slusarek <nslusarek@gmx.net>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/trinity-c2d6cede-bfb1-44e2-85af-1fbc7f541715-1612535117028@3c-app-gmx-bap12
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: fix iteration for sctp transport seq_files

commit af8085f3a4712c57d0dd415ad543bac85780375c upstream.

The sctp transport seq_file iterators take a reference to the transport
in the ->start and ->next functions and releases the reference in the
->show function.  The preferred handling for such resources is to
release them in the subsequent ->next or ->stop function call.

Since Commit 1f4aace60b0e ("fs/seq_file.c: simplify seq_file iteration
code and interface") there is no guarantee that ->show will be called
after ->next, so this function can now leak references.

So move the sctp_transport_put() call to ->next and ->stop.

Fixes: 1f4aace60b0e ("fs/seq_file.c: simplify seq_file iteration code and interface")
Reported-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: gro: do not keep too many GRO packets in napi->rx_list

commit 8dc1c444df193701910f5e80b5d4caaf705a8fb0 upstream.

Commit c80794323e82 ("net: Fix packet reordering caused by GRO and
listified RX cooperation") had the unfortunate effect of adding
latencies in common workloads.

Before the patch, GRO packets were immediately passed to
upper stacks.

After the patch, we can accumulate quite a lot of GRO
packets (depdending on NAPI budget).

My fix is counting in napi->rx_count number of segments
instead of number of logical packets.

Fixes: c80794323e82 ("net: Fix packet reordering caused by GRO and listified RX cooperation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Bisected-by: John Sperbeck <jsperbeck@google.com>
Tested-by: Jian Yang <jianyang@google.com>
Cc: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Alexander Lobakin <alobakin@pm.me>
Link: https://lore.kernel.org/r/20210204213146.4192368-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: ACPI: Update arch scale-invariance max perf ratio if CPPC is not there

commit d11a1d08a082a7dc0ada423d2b2e26e9b6f2525c upstream.

If the maximum performance level taken for computing the
arch_max_freq_ratio value used in the x86 scale-invariance code is
higher than the one corresponding to the cpuinfo.max_freq value
coming from the acpi_cpufreq driver, the scale-invariant utilization
falls below 100% even if the CPU runs at cpuinfo.max_freq or slightly
faster, which causes the schedutil governor to select a frequency
below cpuinfo.max_freq.  That frequency corresponds to a frequency
table entry below the maximum performance level necessary to get to
the "boost" range of CPU frequencies which prevents "boost"
frequencies from being used in some workloads.

While this issue is related to scale-invariance, it may be amplified
by commit db865272d9c4 ("cpufreq: Avoid configuring old governors as
default with intel_pstate") from the 5.10 development cycle which
made it extremely easy to default to schedutil even if the preferred
driver is acpi_cpufreq as long as intel_pstate is built too, because
the mere presence of the latter effectively removes the ondemand
governor from the defaults.  Distro kernels are likely to include
both intel_pstate and acpi_cpufreq on x86, so their users who cannot
use intel_pstate or choose to use acpi_cpufreq may easily be
affectecd by this issue.

If CPPC is available, it can be used to address this issue by
extending the frequency tables created by acpi_cpufreq to cover the
entire available frequency range (including "boost" frequencies) for
each CPU, but if CPPC is not there, acpi_cpufreq has no idea what
the maximum "boost" frequency is and the frequency tables created by
it cannot be extended in a meaningful way, so in that case make it
ask the arch scale-invariance code to to use the "nominal" performance
level for CPU utilization scaling in order to avoid the issue at hand.

Fixes: db865272d9c4 ("cpufreq: Avoid configuring old governors as default with intel_pstate")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: ACPI: Extend frequency tables to cover boost frequencies

commit 3c55e94c0adea4a5389c4b80f6ae9927dd6a4501 upstream.

A severe performance regression on AMD EPYC processors when using
the schedutil scaling governor was discovered by Phoronix.com and
attributed to the following commits:

  41ea667227ba ("x86, sched: Calculate frequency invariance for AMD
  systems")

  976df7e5730e ("x86, sched: Use midpoint of max_boost and max_P for
  frequency invariance on AMD EPYC")

The source of the problem is that the maximum performance level taken
for computing the arch_max_freq_ratio value used in the x86 scale-
invariance code is higher than the one corresponding to the
cpuinfo.max_freq value coming from the acpi_cpufreq driver.

This effectively causes the scale-invariant utilization to fall below
100% even if the CPU runs at cpuinfo.max_freq or slightly faster, so
the schedutil governor selects a frequency below cpuinfo.max_freq
then.  That frequency corresponds to a frequency table entry below
the maximum performance level necessary to get to the "boost" range
of CPU frequencies.

However, if the cpuinfo.max_freq value coming from acpi_cpufreq was
higher, the schedutil governor would select higher frequencies which
in turn would allow acpi_cpufreq to set more adequate performance
levels and to get to the "boost" range of CPU frequencies more often.

This issue affects any systems where acpi_cpufreq is used and the
"boost" (or "turbo") frequencies are enabled, not just AMD EPYC.
Moreover, commit db865272d9c4 ("cpufreq: Avoid configuring old
governors as default with intel_pstate") from the 5.10 development
cycle made it extremely easy to default to schedutil even if the
preferred driver is acpi_cpufreq as long as intel_pstate is built
too, because the mere presence of the latter effectively removes the
ondemand governor from the defaults.  Distro kernels are likely to
include both intel_pstate and acpi_cpufreq on x86, so their users
who cannot use intel_pstate or choose to use acpi_cpufreq may
easily be affectecd by this issue.

To address this issue, extend the frequency table constructed by
acpi_cpufreq for each CPU to cover the entire range of available
frequencies (including the "boost" ones) if CPPC is available and
indicates that "boost" (or "turbo") frequencies are enabled.  That
causes cpuinfo.max_freq to become the maximum "boost" frequency of
the given CPU (instead of the maximum frequency returned by the ACPI
_PSS object that corresponds to the "nominal" performance level).

Fixes: 41ea667227ba ("x86, sched: Calculate frequency invariance for AMD systems")
Fixes: 976df7e5730e ("x86, sched: Use midpoint of max_boost and max_P for frequency invariance on AMD EPYC")
Fixes: db865272d9c4 ("cpufreq: Avoid configuring old governors as default with intel_pstate")
Link: https://www.phoronix.com/scan.php?page=article&item=linux511-amd-schedutil&num=1
Link: https://lore.kernel.org/linux-pm/20210203135321.12253-2-ggherdovich@suse.cz/
Reported-by: Michael Larabel <Michael@phoronix.com>
Diagnosed-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Reviewed-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Tested-by: Michael Larabel <Michael@phoronix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: call teardown method on probe failure

commit 8fd54a73b7cda11548154451bdb4bde6d8ff74c7 upstream.

Since teardown is supposed to undo the effects of the setup method, it
should be called in the error path for dsa_switch_setup, not just in
dsa_switch_teardown.

Fixes: 5e3f847a02aa ("net: dsa: Add teardown callback for drivers")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210204163351.2929670-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udp: fix skb_copy_and_csum_datagram with odd segment sizes

commit 52cbd23a119c6ebf40a527e53f3402d2ea38eccb upstream.

When iteratively computing a checksum with csum_block_add, track the
offset "pos" to correctly rotate in csum_block_add when offset is odd.

The open coded implementation of skb_copy_and_csum_datagram did this.
With the switch to __skb_datagram_iter calling csum_and_copy_to_iter,
pos was reinitialized to 0 on each call.

Bring back the pos by passing it along with the csum to the callback.

Changes v1->v2
  - pass csum value, instead of csump pointer (Alexander Duyck)

Link: https://lore.kernel.org/netdev/20210128152353.GB27281@optiplex/
Fixes: 950fcaecd5cc ("datagram: consolidate datagram copy to iter helpers")
Reported-by: Oliver Graute <oliver.graute@gmail.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210203192952.1849843-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rxrpc: Fix clearance of Tx/Rx ring when releasing a call

commit 7b5eab57cac45e270a0ad624ba157c5b30b3d44d upstream.

At the end of rxrpc_release_call(), rxrpc_cleanup_ring() is called to clear
the Rx/Tx skbuff ring, but this doesn't lock the ring whilst it's accessing
it.  Unfortunately, rxrpc_resend() might be trying to retransmit a packet
concurrently with this - and whilst it does lock the ring, this isn't
protection against rxrpc_cleanup_call().

Fix this by removing the call to rxrpc_cleanup_ring() from
rxrpc_release_call().  rxrpc_cleanup_ring() will be called again anyway
from rxrpc_cleanup_call().  The earlier call is just an optimisation to
recycle skbuffs more quickly.

Alternative solutions include rxrpc_release_call() could try to cancel the
work item or wait for it to complete or rxrpc_cleanup_ring() could lock
when accessing the ring (which would require a bh lock).

This can produce a report like the following:

  BUG: KASAN: use-after-free in rxrpc_send_data_packet+0x19b4/0x1e70 net/rxrpc/output.c:372
  Read of size 4 at addr ffff888011606e04 by task kworker/0:0/5
  ...
  Workqueue: krxrpcd rxrpc_process_call
  Call Trace:
   ...
   kasan_report.cold+0x79/0xd5 mm/kasan/report.c:413
   rxrpc_send_data_packet+0x19b4/0x1e70 net/rxrpc/output.c:372
   rxrpc_resend net/rxrpc/call_event.c:266 [inline]
   rxrpc_process_call+0x1634/0x1f60 net/rxrpc/call_event.c:412
   process_one_work+0x98d/0x15f0 kernel/workqueue.c:2275
   ...

  Allocated by task 2318:
   ...
   sock_alloc_send_pskb+0x793/0x920 net/core/sock.c:2348
   rxrpc_send_data+0xb51/0x2bf0 net/rxrpc/sendmsg.c:358
   rxrpc_do_sendmsg+0xc03/0x1350 net/rxrpc/sendmsg.c:744
   rxrpc_sendmsg+0x420/0x630 net/rxrpc/af_rxrpc.c:560
   ...

  Freed by task 2318:
   ...
   kfree_skb+0x140/0x3f0 net/core/skbuff.c:704
   rxrpc_free_skb+0x11d/0x150 net/rxrpc/skbuff.c:78
   rxrpc_cleanup_ring net/rxrpc/call_object.c:485 [inline]
   rxrpc_release_call+0x5dd/0x860 net/rxrpc/call_object.c:552
   rxrpc_release_calls_on_socket+0x21c/0x300 net/rxrpc/call_object.c:579
   rxrpc_release_sock net/rxrpc/af_rxrpc.c:885 [inline]
   rxrpc_release+0x263/0x5a0 net/rxrpc/af_rxrpc.c:916
   __sock_release+0xcd/0x280 net/socket.c:597
   ...

  The buggy address belongs to the object at ffff888011606dc0
   which belongs to the cache skbuff_head_cache of size 232

Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code")
Reported-by: syzbot+174de899852504e4a74a@syzkaller.appspotmail.com
Reported-by: syzbot+3d1c772efafd3c38d007@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Hillf Danton <hdanton@sina.com>
Link: https://lore.kernel.org/r/161234207610.653119.5287360098400436976.stgit@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: mte: Allow PTRACE_PEEKMTETAGS access to the zero page

commit 68d54ceeec0e5fee4fb8048e6a04c193f32525ca upstream.

The ptrace(PTRACE_PEEKMTETAGS) implementation checks whether the user
page has valid tags (mapped with PROT_MTE) by testing the PG_mte_tagged
page flag. If this bit is cleared, ptrace(PTRACE_PEEKMTETAGS) returns
-EIO.

A newly created (PROT_MTE) mapping points to the zero page which had its
tags zeroed during cpu_enable_mte(). If there were no prior writes to
this mapping, ptrace(PTRACE_PEEKMTETAGS) fails with -EIO since the zero
page does not have the PG_mte_tagged flag set.

Set PG_mte_tagged on the zero page when its tags are cleared during
boot. In addition, to avoid ptrace(PTRACE_PEEKMTETAGS) succeeding on
!PROT_MTE mappings pointing to the zero page, change the
__access_remote_tags() check to (vm_flags & VM_MTE) instead of
PG_mte_tagged.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fixes: 34bfeea4a9e9 ("arm64: mte: Clear the tags when a page is mapped in user-space with PROT_MTE")
Cc: <stable@vger.kernel.org> # 5.10.x
Cc: Will Deacon <will@kernel.org>
Reported-by: Luis Machado <luis.machado@linaro.org>
Tested-by: Luis Machado <luis.machado@linaro.org>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20210210180316.23654-1-catalin.marinas@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/pci: Create PCI/MSI irqdomain after x86_init.pci.arch_init()

commit 70245f86c109e0eafb92ea9653184c0e44b4b35c upstream.

Invoking x86_init.irqs.create_pci_msi_domain() before
x86_init.pci.arch_init() breaks XEN PV.

The XEN_PV specific pci.arch_init() function overrides the default
create_pci_msi_domain() which is obviously too late.

As a consequence the XEN PV PCI/MSI allocation goes through the native
path which runs out of vectors and causes malfunction.

Invoke it after x86_init.pci.arch_init().

Fixes: 6b15ffa07dc3 ("x86/irq: Initialize PCI/MSI domain at PCI init time")
Reported-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87pn18djte.fsf@nanos.tec.linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scripts: set proper OpenSSL include dir also for sign-file

commit fe968c41ac4f4ec9ffe3c4cf16b72285f5e9674f upstream.

Fixes: 2cea4a7a1885 ("scripts: use pkg-config to locate libcrypto")
Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Cc: stable@vger.kernel.org # 5.6.x
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

h8300: fix PREEMPTION build, TI_PRE_COUNT undefined

[ Upstream commit ade9679c159d5bbe14fb7e59e97daf6062872e2b ]

Fix a build error for undefined 'TI_PRE_COUNT' by adding it to
asm-offsets.c.

  h8300-linux-ld: arch/h8300/kernel/entry.o: in function `resume_kernel': (.text+0x29a): undefined reference to `TI_PRE_COUNT'

Link: https://lkml.kernel.org/r/20210212021650.22740-1-rdunlap@infradead.org
Fixes: df2078b8daa7 ("h8300: Low level entry")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: stm32f7: fix configuration of the digital filter

[ Upstream commit 3d6a3d3a2a7a3a60a824e7c04e95fd50dec57812 ]

The digital filter related computation are present in the driver
however the programming of the filter within the IP is missing.
The maximum value for the DNF is wrong and should be 15 instead of 16.

Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver")

Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: sunxi-ng: mp: fix parent rate change flag check

[ Upstream commit 245090ab2636c0869527ce563afbfb8aff29e825 ]

CLK_SET_RATE_PARENT flag is checked on parent clock instead of current
one. Fix that.

Fixes: 3f790433c3cb ("clk: sunxi-ng: Adjust MP clock parent rate when allowed")
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://lore.kernel.org/r/20210209175900.7092-2-jernej.skrabec@siol.net
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/sun4i: dw-hdmi: Fix max. frequency for H6

[ Upstream commit 1926a0508d8947cf081280d85ff035300dc71da7 ]

It turns out that reasoning for lowering max. supported frequency is
wrong. Scrambling works just fine. Several now fixed bugs prevented
proper functioning, even with rates lower than 340 MHz. Issues were just
more pronounced with higher frequencies.

Fix that by allowing max. supported frequency in HW and fix the comment.

Fixes: cd9063757a22 ("drm/sun4i: DW HDMI: Lower max. supported rate for H6")
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209175900.7092-6-jernej.skrabec@siol.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/sun4i: Fix H6 HDMI PHY configuration

[ Upstream commit 6a155216c48f2f65c8dcb02c4c27549c170d24a9 ]

As it turns out, vendor HDMI PHY driver for H6 has a pretty big table
of predefined values for various pixel clocks. However, most of them are
not useful/tested because they come from reference driver code. Vendor
PHY driver is concerned with only few of those, namely 27 MHz, 74.25
MHz, 148.5 MHz, 297 MHz and 594 MHz. These are all frequencies for
standard CEA modes.

Fix sun50i_h6_cur_ctr and sun50i_h6_phy_config with the values only for
aforementioned frequencies.

Table sun50i_h6_mpll_cfg doesn't need to be changed because values are
actually frequency dependent and not so much SoC dependent. See i.MX6
documentation for explanation of those values for similar PHY.

Fixes: c71c9b2fee17 ("drm/sun4i: Add support for Synopsys HDMI PHY")
Tested-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209175900.7092-5-jernej.skrabec@siol.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/sun4i: dw-hdmi: always set clock rate

[ Upstream commit 36b53581fe0dc2e25b67de4e58920307f22d195a ]

As expected, HDMI controller clock should always match pixel clock. In
the past, changing HDMI controller rate would seemingly worsen
situation. However, that was the result of other bugs which are now
fixed.

Fix that by removing set_rate quirk and always set clock rate.

Fixes: 40bb9d3147b2 ("drm/sun4i: Add support for H6 DW HDMI controller")
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209175900.7092-4-jernej.skrabec@siol.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/sun4i: tcon: set sync polarity for tcon1 channel

[ Upstream commit 50791f5d7b6a14b388f46c8885f71d1b98216d1d ]

Channel 1 has polarity bits for vsync and hsync signals but driver never
sets them. It turns out that with pre-HDMI2 controllers seemingly there
is no issue if polarity is not set. However, with HDMI2 controllers
(H6) there often comes to de-synchronization due to phase shift. This
causes flickering screen. It's safe to assume that similar issues might
happen also with pre-HDMI2 controllers.

Solve issue with setting vsync and hsync polarity. Note that display
stacks with tcon top have polarity bits actually in tcon0 polarity
register.

Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support")
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209175900.7092-3-jernej.skrabec@siol.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware_loader: align .builtin_fw to 8

[ Upstream commit 793f49a87aae24e5bcf92ad98d764153fc936570 ]

arm64 references the start address of .builtin_fw (__start_builtin_fw)
with a pair of R_AARCH64_ADR_PREL_PG_HI21/R_AARCH64_LDST64_ABS_LO12_NC
relocations.  The compiler is allowed to emit the
R_AARCH64_LDST64_ABS_LO12_NC relocation because struct builtin_fw in
include/linux/firmware.h is 8-byte aligned.

The R_AARCH64_LDST64_ABS_LO12_NC relocation requires the address to be a
multiple of 8, which may not be the case if .builtin_fw is empty.
Unconditionally align .builtin_fw to fix the linker error.  32-bit
architectures could use ALIGN(4) but that would add unnecessary
complexity, so just use ALIGN(8).

Link: https://lkml.kernel.org/r/20201208054646.2913063-1-maskray@google.com
Link: https://github.com/ClangBuiltLinux/linux/issues/1204
Fixes: 5658c76 ("firmware: allow firmware files to be built into kernel image")
Signed-off-by: Fangrui Song <maskray@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: add a check for index in hclge_get_rss_key()

[ Upstream commit 532cfc0df1e4d68e74522ef4a0dcbf6ebbe68287 ]

The index is received from vf, if use it directly,
an out-of-bound issue may be caused, so add a check for
this index before using it in hclge_get_rss_key().

Fixes: a638b1d8cc87 ("net: hns3: fix get VF RSS issue")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: add a check for tqp_index in hclge_get_ring_chain_from_mbx()

[ Upstream commit 326334aad024a60f46dc5e7dbe1efe32da3ca66f ]

The tqp_index is received from vf, if use it directly,
an out-of-bound issue may be caused, so add a check for
this tqp_index before using it in hclge_get_ring_chain_from_mbx().

Fixes: 84e095d64ed9 ("net: hns3: Change PF to add ring-vect binding & resetQ to mailbox")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: add a check for queue_id in hclge_reset_vf_queue()

[ Upstream commit 67a69f84cab60484f02eb8cbc7a76edffbb28a25 ]

The queue_id is received from vf, if use it directly,
an out-of-bound issue may be caused, so add a check for
this queue_id before using it in hclge_reset_vf_queue().

Fixes: 1a426f8b40fc ("net: hns3: fix the VF queue reset flow error")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: felix: implement port flushing on .phylink_mac_link_down

[ Upstream commit eb4733d7cffc547e08fe5a216e4f03663bb71108 ]

There are several issues which may be seen when the link goes down while
forwarding traffic, all of which can be attributed to the fact that the
port flushing procedure from the reference manual was not closely
followed.

With flow control enabled on both the ingress port and the egress port,
it may happen when a link goes down that Ethernet packets are in flight.
In flow control mode, frames are held back and not dropped. When there
is enough traffic in flight (example: iperf3 TCP), then the ingress port
might enter congestion and never exit that state. This is a problem,
because it is the egress port's link that went down, and that has caused
the inability of the ingress port to send packets to any other port.
This is solved by flushing the egress port's queues when it goes down.

There is also a problem when performing stream splitting for
IEEE 802.1CB traffic (not yet upstream, but a sort of multicast,
basically). There, if one port from the destination ports mask goes
down, splitting the stream towards the other destinations will no longer
be performed. This can be traced down to this line:

ocelot_port_writel(ocelot_port, 0, DEV_MAC_ENA_CFG);

which should have been instead, as per the reference manual:

ocelot_port_rmwl(ocelot_port, 0, DEV_MAC_ENA_CFG_RX_ENA,
 DEV_MAC_ENA_CFG);

Basically only DEV_MAC_ENA_CFG_RX_ENA should be disabled, but not
DEV_MAC_ENA_CFG_TX_ENA - I don't have further insight into why that is
the case, but apparently multicasting to several ports will cause issues
if at least one of them doesn't have DEV_MAC_ENA_CFG_TX_ENA set.

I am not sure what the state of the Ocelot VSC7514 driver is, but
probably not as bad as Felix/Seville, since VSC7514 uses phylib and has
the following in ocelot_adjust_link:

if (!phydev->link)
return;

therefore the port is not really put down when the link is lost, unlike
the DSA drivers which use .phylink_mac_link_down for that.

Nonetheless, I put ocelot_port_flush() in the common ocelot.c because it
needs to access some registers from drivers/net/ethernet/mscc/ocelot_rew.h
which are not exported in include/soc/mscc/ and a bugfix patch should
probably not move headers around.

Fixes: bdeced75b13f ("net: dsa: felix: Add PCS operations for PHYLINK")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/build: Disable CET instrumentation in the kernel for 32-bit too

[ Upstream commit 256b92af784d5043eeb7d559b6d5963dcc2ecb10 ]

Commit

  20bf2b378729 ("x86/build: Disable CET instrumentation in the kernel")

disabled CET instrumentation which gets added by default by the Ubuntu
gcc9 and 10 by default, but did that only for 64-bit builds. It would
still fail when building a 32-bit target. So disable CET for all x86
builds.

Fixes: 20bf2b378729 ("x86/build: Disable CET instrumentation in the kernel")
Reported-by: AC <achirvasub@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: AC <achirvasub@gmail.com>
Link: https://lkml.kernel.org/r/YCCIgMHkzh/xT4ex@arch-chirva.localdomain
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: scsi_debug: Fix a memory leak

[ Upstream commit f852c596f2ee6f0eb364ea8f28f89da6da0ae7b5 ]

The sdebug_q_arr pointer must be freed when the module is unloaded.

$ cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff888e1cfb0000 (size 4096):
  comm "modprobe", pid 165555, jiffies 4325987516 (age 685.194s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000458f4f5d>] 0xffffffffc06702d9
    [<000000003edc4b1f>] do_one_initcall+0xe9/0x57d
    [<00000000da7d518c>] do_init_module+0x1d1/0x6f0
    [<000000009a6a9248>] load_module+0x36bd/0x4f50
    [<00000000ddb0c3ce>] __do_sys_init_module+0x1db/0x260
    [<000000009532db57>] do_syscall_64+0xa5/0x420
    [<000000002916b13d>] entry_SYSCALL_64_after_hwframe+0x6a/0xdf

Fixes: 87c715dcde63 ("scsi: scsi_debug: Add per_host_store option")
Link: https://lore.kernel.org/r/20210208111734.34034-1-mlombard@redhat.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: conntrack: skip identical origin tuple in same zone only

[ Upstream commit 07998281c268592963e1cd623fe6ab0270b65ae4 ]

The origin skip check needs to re-test the zone. Else, we might skip
a colliding tuple in the reply direction.

This only occurs when using 'directional zones' where origin tuples
reside in different zones but the reply tuples share the same zone.

This causes the new conntrack entry to be dropped at confirmation time
because NAT clash resolution was elided.

Fixes: 4e35c1cb9460240 ("netfilter: nf_nat: skip nat clash resolution for same-origin entries")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ibmvnic: Clear failover_pending if unable to schedule

[ Upstream commit ef66a1eace968ff22a35f45e6e8ec36b668b6116 ]

Normally we clear the failover_pending flag when processing the reset.
But if we are unable to schedule a failover reset we must clear the
flag ourselves. We could fail to schedule the reset if we are in PROBING
state (eg: when booting via kexec) or because we could not allocate memory.

Thanks to Cris Forno for helping isolate the problem and for testing.

Fixes: 1d8504937478 ("powerpc/vnic: Extend "failover pending" window")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Tested-by: Cristobal Forno <cforno12@linux.ibm.com>
Link: https://lore.kernel.org/r/20210203050802.680772-1-sukadev@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: set TxQ mode back to DCB after disabling CBS

[ Upstream commit f317e2ea8c88737aa36228167b2292baef3f0430 ]

When disable CBS, mode_to_use parameter is not updated even the operation
mode of Tx Queue is changed to Data Centre Bridging (DCB). Therefore,
when tc_setup_cbs() function is called to re-enable CBS, the operation
mode of Tx Queue remains at DCB, which causing CBS fails to work.

This patch updates the value of mode_to_use parameter to MTL_QUEUE_DCB
after operation mode of Tx Queue is changed to DCB in stmmac_dma_qmode()
callback function.

Fixes: 1f705bc61aee ("net: stmmac: Add support for CBS QDISC")
Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: Song, Yoong Siang <yoong.siang.song@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://lore.kernel.org/r/1612447396-20351-1-git-send-email-yoong.siang.song@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: txtimestamp: fix compilation issue

[ Upstream commit 647b8dd5184665432cc8a2b5bca46a201f690c37 ]

PACKET_TX_TIMESTAMP is defined in if_packet.h but it is not included in
test. Include it instead of <netpacket/packet.h> otherwise the error of
redefinition arrives.
Also fix the compiler warning about ambiguous control flow by adding
explicit braces.

Fixes: 8fe2f761cae9 ("net-timestamp: expand documentation")
Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/1612461034-24524-1-git-send-email-vfedorenko@novek.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: enetc: initialize the RFS and RSS memories

[ Upstream commit 07bf34a50e327975b21a9dee64d220c3dcb72ee9 ]

Michael tried to enable Advanced Error Reporting through the ENETC's
Root Complex Event Collector, and the system started spitting out single
bit correctable ECC errors coming from the ENETC interfaces:

pcieport 0000:00:1f.0: AER: Multiple Corrected error received: 0000:00:00.0
fsl_enetc 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Transaction Layer, (Receiver ID)
fsl_enetc 0000:00:00.0:   device [1957:e100] error status/mask=00004000/00000000
fsl_enetc 0000:00:00.0:    [14] CorrIntErr
fsl_enetc 0000:00:00.1: PCIe Bus Error: severity=Corrected, type=Transaction Layer, (Receiver ID)
fsl_enetc 0000:00:00.1:   device [1957:e100] error status/mask=00004000/00000000
fsl_enetc 0000:00:00.1:    [14] CorrIntErr

Further investigating the port correctable memory error detect register
(PCMEDR) shows that these AER errors have an associated SOURCE_ID of 6
(RFS/RSS):

$ devmem 0x1f8010e10 32
0xC0000006
$ devmem 0x1f8050e10 32
0xC0000006

Discussion with the hardware design engineers reveals that on LS1028A,
the hardware does not do initialization of that RFS/RSS memory, and that
software should clear/initialize the entire table before starting to
operate. That comes as a bit of a surprise, since the driver does not do
initialization of the RFS memory. Also, the initialization of the
Receive Side Scaling is done only partially.

Even though the entire ENETC IP has a single shared flow steering
memory, the flow steering service should returns matches only for TCAM
entries that are within the range of the Station Interface that is doing
the search. Therefore, it should be sufficient for a Station Interface
to initialize all of its own entries in order to avoid any ECC errors,
and only the Station Interfaces in use should need initialization.

There are Physical Station Interfaces associated with PCIe PFs and
Virtual Station Interfaces associated with PCIe VFs. We let the PF
driver initialize the entire port's memory, which includes the RFS
entries which are going to be used by the VF.

Reported-by: Michael Walle <michael@walle.cc>
Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Michael Walle <michael@walle.cc>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Link: https://lore.kernel.org/r/20210204134511.2640309-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hv_netvsc: Reset the RSC count if NVSP_STAT_FAIL in netvsc_receive()

[ Upstream commit 12bc8dfb83b5292fe387b795210018b7632ee08b ]

Commit 44144185951a0f ("hv_netvsc: Add validation for untrusted Hyper-V
values") added validation to rndis_filter_receive_data() (and
rndis_filter_receive()) which introduced NVSP_STAT_FAIL-scenarios where
the count is not updated/reset.  Fix this omission, and prevent similar
scenarios from occurring in the future.

Reported-by: Juan Vazquez <juvazq@microsoft.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Fixes: 44144185951a0f ("hv_netvsc: Add validation for untrusted Hyper-V values")
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Link: https://lore.kernel.org/r/20210203113602.558916-1-parri.andrea@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ipa: set error code in gsi_channel_setup()

[ Upstream commit 1d23a56b0296d29e7047b41fe0a42a001036160d ]

In gsi_channel_setup(), we check to see if the configuration data
contains any information about channels that are not supported by
the hardware.  If one is found, we abort the setup process, but
the error code (ret) is not set in this case.  Fix this bug.

Fixes: 650d1603825d8 ("soc: qcom: ipa: the generic software interface")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20210204010655.15619-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hdlc_x25: Return meaningful error code in x25_open

[ Upstream commit 81b8be68ef8e8915d0cc6cedd2ac425c74a24813 ]

It's not meaningful to pass on LAPB error codes to HDLC code or other
parts of the system, because they will not understand the error codes.

Instead, use system-wide recognizable error codes.

Fixes: f362e5fe0f1f ("wan/hdlc_x25: make lapb params configurable")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Link: https://lore.kernel.org/r/20210203071541.86138-1-xie.he.0141@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen/netback: avoid race in xenvif_rx_ring_slots_available()

[ Upstream commit ec7d8e7dd3a59528e305a18e93f1cb98f7faf83b ]

Since commit 23025393dbeb3b8b3 ("xen/netback: use lateeoi irq binding")
xenvif_rx_ring_slots_available() is no longer called only from the rx
queue kernel thread, so it needs to access the rx queue with the
associated queue held.

Reported-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Fixes: 23025393dbeb3b8b3 ("xen/netback: use lateeoi irq binding")
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wl@xen.org>
Link: https://lore.kernel.org/r/20210202070938.7863-1-jgross@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: flowtable: fix tcp and udp header checksum update

[ Upstream commit 8d6bca156e47d68551750a384b3ff49384c67be3 ]

When updating the tcp or udp header checksum on port nat the function
inet_proto_csum_replace2 with the last parameter pseudohdr as true.
This leads to an error in the case that GRO is used and packets are
split up in GSO. The tcp or udp checksum of all packets is incorrect.

The error is probably masked due to the fact the most network driver
implement tcp/udp checksum offloading. It also only happens when GRO is
applied and not on single packets.

The error is most visible when using a pppoe connection which is not
triggering the tcp/udp checksum offload.

Fixes: ac2a66665e23 ("netfilter: add generic flow table infrastructure")
Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nftables: fix possible UAF over chains from packet path in netns

[ Upstream commit 767d1216bff82507c945e92fe719dff2083bb2f4 ]

Although hooks are released via call_rcu(), chain and rule objects are
immediately released while packets are still walking over these bits.

This patch adds the .pre_exit callback which is invoked before
synchronize_rcu() in the netns framework to stay safe.

Remove a comment which is not valid anymore since the core does not use
synchronize_net() anymore since 8c873e219970 ("netfilter: core: free
hooks with call_rcu").

Suggested-by: Florian Westphal <fw@strlen.de>
Fixes: df05ef874b28 ("netfilter: nf_tables: release objects on netns destruction")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: netfilter: fix current year

[ Upstream commit a3005b0f83f217c888393c6bf9cd36e3d1616bca ]

use date %Y instead of %G to read current year
Problem appeared when running lkp-tests on 01/01/2021

Fixes: 48d072c4e8cd ("selftests: netfilter: add time counter check")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: xt_recent: Fix attempt to update deleted entry

[ Upstream commit b1bdde33b72366da20d10770ab7a49fe87b5e190 ]

When both --reap and --update flag are specified, there's a code
path at which the entry to be updated is reaped beforehand,
which then leads to kernel crash. Reap only entries which won't be
updated.

Fixes kernel bugzilla #207773.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=207773
Reported-by: Reindl Harald <h.reindl@thelounge.net>
Fixes: 0079c5aee348 ("netfilter: xt_recent: add an entry reaper")
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Check for integer overflow when using roundup_pow_of_two()

[ Upstream commit 6183f4d3a0a2ad230511987c6c362ca43ec0055f ]

On 32-bit architecture, roundup_pow_of_two() can return 0 when the argument
has upper most bit set due to resulting 1UL << 32. Add a check for this case.

Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE")
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210127063653.3576-1-minhquangbui99@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Unbreak BPF_PROG_TYPE_KPROBE when kprobe is called via do_int3

[ Upstream commit 548f1191d86ccb9bde2a5305988877b7584c01eb ]

The commit 0d00449c7a28 ("x86: Replace ist_enter() with nmi_enter()")
converted do_int3 handler to be "NMI-like".
That made old if (in_nmi()) check abort execution of bpf programs
attached to kprobe when kprobe is firing via int3
(For example when kprobe is placed in the middle of the function).
Remove the check to restore user visible behavior.

Fixes: 0d00449c7a28 ("x86: Replace ist_enter() with nmi_enter()")
Reported-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/bpf/20210203070636.70926-1-alexei.starovoitov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: idxd: check device state before issue command

[ Upstream commit 89e3becd8f821e507052e012d2559dcda59f538e ]

Add device state check before executing command. Without the check the
command can be issued while device is in halt state and causes the driver to
block while waiting for the completion of the command.

Reported-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Tested-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Fixes: 0d5c10b4c84d ("dmaengine: idxd: add work queue drain support")
Link: https://lore.kernel.org/r/161219313921.2976211.12222625226450097465.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vc4: hvs: Fix buffer overflow with the dlist handling

[ Upstream commit facd93f4285c405f9a91b05166147cb39e860666 ]

Commit 0a038c1c29a7 ("drm/vc4: Move LBM creation out of
vc4_plane_mode_set()") changed the LBM allocation logic from first
allocating the LBM memory for the plane to running mode_set,
adding a gap in the LBM, and then running the dlist allocation filling
that gap.

The gap was introduced by incrementing the dlist array index, but was
never checking whether or not we were over the array length, leading
eventually to memory corruptions if we ever crossed this limit.

vc4_dlist_write had that logic though, and was reallocating a larger
dlist array when reaching the end of the buffer. Let's share the logic
between both functions.

Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Eric Anholt <eric@anholt.net>
Fixes: 0a038c1c29a7 ("drm/vc4: Move LBM creation out of vc4_plane_mode_set()")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129160647.128373-1-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: dma: fix a possible memory leak in mt76_add_fragment()

[ Upstream commit 93a1d4791c10d443bc67044def7efee2991d48b7 ]

Fix a memory leak in mt76_add_fragment routine returning the buffer
to the page_frag_cache when we receive a new fragment and the
skb_shared_info frag array is full.

Fixes: b102f0c522cf6 ("mt76: fix array overflow on receiving too many fragments for a packet")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/4f9dd73407da88b2a552517ce8db242d86bf4d5c.1611616130.git.lorenzo@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath9k: fix build error with LEDS_CLASS=m

[ Upstream commit b64acb28da8394485f0762e657470c9fc33aca4d ]

When CONFIG_ATH9K is built-in but LED support is in a loadable
module, both ath9k drivers fails to link:

x86_64-linux-ld: drivers/net/wireless/ath/ath9k/gpio.o: in function `ath_deinit_leds':
gpio.c:(.text+0x36): undefined reference to `led_classdev_unregister'
x86_64-linux-ld: drivers/net/wireless/ath/ath9k/gpio.o: in function `ath_init_leds':
gpio.c:(.text+0x179): undefined reference to `led_classdev_register_ext'

The problem is that the 'imply' keyword does not enforce any dependency
but is only a weak hint to Kconfig to enable another symbol from a
defconfig file.

Change imply to a 'depends on LEDS_CLASS' that prevents the incorrect
configuration but still allows building the driver without LED support.

The 'select MAC80211_LEDS' is now ensures that the LED support is
actually used if it is present, and the added Kconfig dependency
on MAC80211_LEDS ensures that it cannot be enabled manually when it
has no effect.

Fixes: 197f466e93f5 ("ath9k_htc: Do not select MAC80211_LEDS by default")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210125113654.2408057-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: idxd: fix misc interrupt completion

[ Upstream commit f5cc9ace24fbdf41b4814effbb2f9bad7046e988 ]

Nikhil reported the misc interrupt handler can sometimes miss handling
the command interrupt when an error interrupt happens near the same time.
Have the irq handling thread continue to process the misc interrupts until
all interrupts are processed. This is a low usage interrupt and is not
expected to handle high volume traffic. Therefore there is no concern of
this thread running for a long time.

Fixes: 0d5c10b4c84d ("dmaengine: idxd: add work queue drain support")
Reported-by: Nikhil Rao <nikhil.rao@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161074755329.2183844.13295528344116907983.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cgroup-v1: add disabled controller check in cgroup1_parse_param()

[ Upstream commit 61e960b07b637f0295308ad91268501d744c21b5 ]

When mounting a cgroup hierarchy with disabled controller in cgroup v1,
all available controllers will be attached.
For example, boot with cgroup_no_v1=cpu or cgroup_disable=cpu, and then
mount with "mount -t cgroup -ocpu cpu /sys/fs/cgroup/cpu", then all
enabled controllers will be attached except cpu.

Fix this by adding disabled controller check in cgroup1_parse_param().
If the specified controller is disabled, just return error with information
"Disabled controller xx" rather than attaching all the other enabled
controllers.

Fixes: f5dfb5315d34 ("cgroup: take options parsing into ->parse_monolithic()")
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Reviewed-by: Zefan Li <lizefan.x@bytedance.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: x86: cleanup CR3 reserved bits checks

[ Upstream commit c1c35cf78bfab31b8cb455259524395c9e4c7cd6 ]

If not in long mode, the low bits of CR3 are reserved but not enforced to
be zero, so remove those checks.  If in long mode, however, the MBZ bits
extend down to the highest physical address bit of the guest, excluding
the encryption bit.

Make the checks consistent with the above, and match them between
nested_vmcb_checks and KVM_SET_SREGS.

Cc: stable@vger.kernel.org
Fixes: 761e41693465 ("KVM: nSVM: Check that MBZ bits in CR3 and CR4 are not set on vmrun of nested guests")
Fixes: a780a3ea6282 ("KVM: X86: Fix reserved bits check for MOV to CR3")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lkdtm: don't move ctors to .rodata

commit 3f618ab3323407ee4c6a6734a37eb6e9663ebfb9 upstream.

When building with KASAN and LKDTM, clang may implictly generate an
asan.module_ctor function in the LKDTM rodata object. The Makefile moves
the lkdtm_rodata_do_nothing() function into .rodata by renaming the
file's .text section to .rodata, and consequently also moves the ctor
function into .rodata, leading to a boot time crash (splat below) when
the ctor is invoked by do_ctors().

Let's prevent this by marking the function as noinstr rather than
notrace, and renaming the file's .noinstr.text to .rodata. Marking the
function as noinstr will prevent tracing and kprobes, and will inhibit
any undesireable compiler instrumentation.

The ctor function (if any) will be placed in .text and will work
correctly.

Example splat before this patch is applied:

[    0.916359] Unable to handle kernel execute from non-executable memory at virtual address ffffa0006b60f5ac
[    0.922088] Mem abort info:
[    0.922828]   ESR = 0x8600000e
[    0.923635]   EC = 0x21: IABT (current EL), IL = 32 bits
[    0.925036]   SET = 0, FnV = 0
[    0.925838]   EA = 0, S1PTW = 0
[    0.926714] swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000427b3000
[    0.928489] [ffffa0006b60f5ac] pgd=000000023ffff003, p4d=000000023ffff003, pud=000000023fffe003, pmd=0068000042000f01
[    0.931330] Internal error: Oops: 8600000e [#1] PREEMPT SMP
[    0.932806] Modules linked in:
[    0.933617] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.10.0-rc7 #2
[    0.935620] Hardware name: linux,dummy-virt (DT)
[    0.936924] pstate: 40400005 (nZcv daif +PAN -UAO -TCO BTYPE=--)
[    0.938609] pc : asan.module_ctor+0x0/0x14
[    0.939759] lr : do_basic_setup+0x4c/0x70
[    0.940889] sp : ffff27b600177e30
[    0.941815] x29: ffff27b600177e30 x28: 0000000000000000
[    0.943306] x27: 0000000000000000 x26: 0000000000000000
[    0.944803] x25: 0000000000000000 x24: 0000000000000000
[    0.946289] x23: 0000000000000001 x22: 0000000000000000
[    0.947777] x21: ffffa0006bf4a890 x20: ffffa0006befb6c0
[    0.949271] x19: ffffa0006bef9358 x18: 0000000000000068
[    0.950756] x17: fffffffffffffff8 x16: 0000000000000000
[    0.952246] x15: 0000000000000000 x14: 0000000000000000
[    0.953734] x13: 00000000838a16d5 x12: 0000000000000001
[    0.955223] x11: ffff94000da74041 x10: dfffa00000000000
[    0.956715] x9 : 0000000000000000 x8 : ffffa0006b60f5ac
[    0.958199] x7 : f9f9f9f9f9f9f9f9 x6 : 000000000000003f
[    0.959683] x5 : 0000000000000040 x4 : 0000000000000000
[    0.961178] x3 : ffffa0006bdc15a0 x2 : 0000000000000005
[    0.962662] x1 : 00000000000000f9 x0 : ffffa0006bef9350
[    0.964155] Call trace:
[    0.964844]  asan.module_ctor+0x0/0x14
[    0.965895]  kernel_init_freeable+0x158/0x198
[    0.967115]  kernel_init+0x14/0x19c
[    0.968104]  ret_from_fork+0x10/0x30
[    0.969110] Code: 00000003 00000000 00000000 00000000 (00000000)
[    0.970815] ---[ end trace b5339784e20d015c ]---

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kees Cook <keescook@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20201207170533.10738-1-mark.rutland@arm.com
Cc: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>