Nathan Lynch [Fri, 18 Nov 2022 15:07:42 +0000 (09:07 -0600)]
powerpc/rtas: avoid scheduling in rtas_os_term()
[ Upstream commit
6c606e57eecc37d6b36d732b1ff7e55b7dc32dd4 ]
It's unsafe to use rtas_busy_delay() to handle a busy status from
the ibm,os-term RTAS function in rtas_os_term():
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
BUG: sleeping function called from invalid context at arch/powerpc/kernel/rtas.c:618
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 1, name: swapper/0
preempt_count: 2, expected: 0
CPU: 7 PID: 1 Comm: swapper/0 Tainted: G D 6.0.0-rc5-02182-gf8553a572277-dirty #9
Call Trace:
[
c000000007b8f000] [
c000000001337110] dump_stack_lvl+0xb4/0x110 (unreliable)
[
c000000007b8f040] [
c0000000002440e4] __might_resched+0x394/0x3c0
[
c000000007b8f0e0] [
c00000000004f680] rtas_busy_delay+0x120/0x1b0
[
c000000007b8f100] [
c000000000052d04] rtas_os_term+0xb8/0xf4
[
c000000007b8f180] [
c0000000001150fc] pseries_panic+0x50/0x68
[
c000000007b8f1f0] [
c000000000036354] ppc_panic_platform_handler+0x34/0x50
[
c000000007b8f210] [
c0000000002303c4] notifier_call_chain+0xd4/0x1c0
[
c000000007b8f2b0] [
c0000000002306cc] atomic_notifier_call_chain+0xac/0x1c0
[
c000000007b8f2f0] [
c0000000001d62b8] panic+0x228/0x4d0
[
c000000007b8f390] [
c0000000001e573c] do_exit+0x140c/0x1420
[
c000000007b8f480] [
c0000000001e586c] make_task_dead+0xdc/0x200
Use rtas_busy_delay_time() instead, which signals without side effects
whether to attempt the ibm,os-term RTAS call again.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221118150751.469393-5-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nathan Lynch [Fri, 18 Nov 2022 15:07:41 +0000 (09:07 -0600)]
powerpc/rtas: avoid device tree lookups in rtas_os_term()
[ Upstream commit
ed2213bfb192ab51f09f12e9b49b5d482c6493f3 ]
rtas_os_term() is called during panic. Its behavior depends on a couple
of conditions in the /rtas node of the device tree, the traversal of
which entails locking and local IRQ state changes. If the kernel panics
while devtree_lock is held, rtas_os_term() as currently written could
hang.
Instead of discovering the relevant characteristics at panic time,
cache them in file-static variables at boot. Note the lookup for
"ibm,extended-os-term" is converted to of_property_read_bool() since it
is a boolean property, not an RTAS function token.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
[mpe: Incorporate suggested change from Nick]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221118150751.469393-4-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe Leroy [Mon, 14 Nov 2022 17:57:46 +0000 (23:27 +0530)]
objtool: Fix SEGFAULT
[ Upstream commit
efb11fdb3e1a9f694fa12b70b21e69e55ec59c36 ]
find_insn() will return NULL in case of failure. Check insn in order
to avoid a kernel Oops for NULL pointer dereference.
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221114175754.1131267-9-sv@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yin Xiujiang [Mon, 6 Dec 2021 02:40:45 +0000 (10:40 +0800)]
fs/ntfs3: Fix slab-out-of-bounds in r_page
[ Upstream commit
ecfbd57cf9c5ca225184ae266ce44ae473792132 ]
When PAGE_SIZE is 64K, if read_log_page is called by log_read_rst for
the first time, the size of *buffer would be equal to
DefaultLogPageSize(4K).But for *buffer operations like memcpy,
if the memory area size(n) which being assigned to buffer is larger
than 4K (log->page_size(64K) or bytes(64K-page_off)), it will cause
an out of boundary error.
Call trace:
[...]
kasan_report+0x44/0x130
check_memory_region+0xf8/0x1a0
memcpy+0xc8/0x100
ntfs_read_run_nb+0x20c/0x460
read_log_page+0xd0/0x1f4
log_read_rst+0x110/0x75c
log_replay+0x1e8/0x4aa0
ntfs_loadlog_and_replay+0x290/0x2d0
ntfs_fill_super+0x508/0xec0
get_tree_bdev+0x1fc/0x34c
[...]
Fix this by setting variable r_page to NULL in log_read_rst.
Signed-off-by: Yin Xiujiang <yinxiujiang@kylinos.cn>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Sat, 15 Oct 2022 08:28:55 +0000 (11:28 +0300)]
fs/ntfs3: Delete duplicate condition in ntfs_read_mft()
[ Upstream commit
658015167a8432b88f5d032e9d85d8fd50e5bf2c ]
There were two patches which addressed the same bug and added the same
condition:
commit
6db620863f85 ("fs/ntfs3: Validate data run offset")
commit
887bfc546097 ("fs/ntfs3: Fix slab-out-of-bounds read in run_unpack")
Delete one condition.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tetsuo Handa [Sun, 2 Oct 2022 14:54:11 +0000 (23:54 +0900)]
fs/ntfs3: Use __GFP_NOWARN allocation at ntfs_fill_super()
[ Upstream commit
59bfd7a483da36bd202532a3d9ea1f14f3bf3aaf ]
syzbot is reporting too large allocation at ntfs_fill_super() [1], for a
crafted filesystem can contain bogus inode->i_size. Add __GFP_NOWARN in
order to avoid too large allocation warning, than exhausting memory by
using kvmalloc().
Link: https://syzkaller.appspot.com/bug?extid=33f3faaa0c08744f7d40
Reported-by: syzot <syzbot+33f3faaa0c08744f7d40@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tetsuo Handa [Sun, 2 Oct 2022 14:39:15 +0000 (23:39 +0900)]
fs/ntfs3: Use __GFP_NOWARN allocation at wnd_init()
[ Upstream commit
0d0f659bf713662fabed973f9996b8f23c59ca51 ]
syzbot is reporting too large allocation at wnd_init() [1], for a crafted
filesystem can become wnd->nwnd close to UINT_MAX. Add __GFP_NOWARN in
order to avoid too large allocation warning, than exhausting memory by
using kvcalloc().
Link: https://syzkaller.appspot.com/bug?extid=fa4648a5446460b7b963
Reported-by: syzot <syzbot+fa4648a5446460b7b963@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Edward Lo [Fri, 30 Sep 2022 01:58:40 +0000 (09:58 +0800)]
fs/ntfs3: Validate index root when initialize NTFS security
[ Upstream commit
bfcdbae0523bd95eb75a739ffb6221a37109881e ]
This enhances the sanity check for $SDH and $SII while initializing NTFS
security, guarantees these index root are legit.
[ 162.459513] BUG: KASAN: use-after-free in hdr_find_e.isra.0+0x10c/0x320
[ 162.460176] Read of size 2 at addr
ffff8880037bca99 by task mount/243
[ 162.460851]
[ 162.461252] CPU: 0 PID: 243 Comm: mount Not tainted 6.0.0-rc7 #42
[ 162.461744] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 162.462609] Call Trace:
[ 162.462954] <TASK>
[ 162.463276] dump_stack_lvl+0x49/0x63
[ 162.463822] print_report.cold+0xf5/0x689
[ 162.464608] ? unwind_get_return_address+0x3a/0x60
[ 162.465766] ? hdr_find_e.isra.0+0x10c/0x320
[ 162.466975] kasan_report+0xa7/0x130
[ 162.467506] ? _raw_spin_lock_irq+0xc0/0xf0
[ 162.467998] ? hdr_find_e.isra.0+0x10c/0x320
[ 162.468536] __asan_load2+0x68/0x90
[ 162.468923] hdr_find_e.isra.0+0x10c/0x320
[ 162.469282] ? cmp_uints+0xe0/0xe0
[ 162.469557] ? cmp_sdh+0x90/0x90
[ 162.469864] ? ni_find_attr+0x214/0x300
[ 162.470217] ? ni_load_mi+0x80/0x80
[ 162.470479] ? entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 162.470931] ? ntfs_bread_run+0x190/0x190
[ 162.471307] ? indx_get_root+0xe4/0x190
[ 162.471556] ? indx_get_root+0x140/0x190
[ 162.471833] ? indx_init+0x1e0/0x1e0
[ 162.472069] ? fnd_clear+0x115/0x140
[ 162.472363] ? _raw_spin_lock_irqsave+0x100/0x100
[ 162.472731] indx_find+0x184/0x470
[ 162.473461] ? sysvec_apic_timer_interrupt+0x57/0xc0
[ 162.474429] ? indx_find_buffer+0x2d0/0x2d0
[ 162.474704] ? do_syscall_64+0x3b/0x90
[ 162.474962] dir_search_u+0x196/0x2f0
[ 162.475381] ? ntfs_nls_to_utf16+0x450/0x450
[ 162.475661] ? ntfs_security_init+0x3d6/0x440
[ 162.475906] ? is_sd_valid+0x180/0x180
[ 162.476191] ntfs_extend_init+0x13f/0x2c0
[ 162.476496] ? ntfs_fix_post_read+0x130/0x130
[ 162.476861] ? iput.part.0+0x286/0x320
[ 162.477325] ntfs_fill_super+0x11e0/0x1b50
[ 162.477709] ? put_ntfs+0x1d0/0x1d0
[ 162.477970] ? vsprintf+0x20/0x20
[ 162.478258] ? set_blocksize+0x95/0x150
[ 162.478538] get_tree_bdev+0x232/0x370
[ 162.478789] ? put_ntfs+0x1d0/0x1d0
[ 162.479038] ntfs_fs_get_tree+0x15/0x20
[ 162.479374] vfs_get_tree+0x4c/0x130
[ 162.479729] path_mount+0x654/0xfe0
[ 162.480124] ? putname+0x80/0xa0
[ 162.480484] ? finish_automount+0x2e0/0x2e0
[ 162.480894] ? putname+0x80/0xa0
[ 162.481467] ? kmem_cache_free+0x1c4/0x440
[ 162.482280] ? putname+0x80/0xa0
[ 162.482714] do_mount+0xd6/0xf0
[ 162.483264] ? path_mount+0xfe0/0xfe0
[ 162.484782] ? __kasan_check_write+0x14/0x20
[ 162.485593] __x64_sys_mount+0xca/0x110
[ 162.486024] do_syscall_64+0x3b/0x90
[ 162.486543] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 162.487141] RIP: 0033:0x7f9d374e948a
[ 162.488324] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008
[ 162.489728] RSP: 002b:
00007ffe30e73d18 EFLAGS:
00000206 ORIG_RAX:
00000000000000a5
[ 162.490971] RAX:
ffffffffffffffda RBX:
0000561cdb43a060 RCX:
00007f9d374e948a
[ 162.491669] RDX:
0000561cdb43a260 RSI:
0000561cdb43a2e0 RDI:
0000561cdb442af0
[ 162.492050] RBP:
0000000000000000 R08:
0000561cdb43a280 R09:
0000000000000020
[ 162.492459] R10:
00000000c0ed0000 R11:
0000000000000206 R12:
0000561cdb442af0
[ 162.493183] R13:
0000561cdb43a260 R14:
0000000000000000 R15:
00000000ffffffff
[ 162.493644] </TASK>
[ 162.493908]
[ 162.494214] The buggy address belongs to the physical page:
[ 162.494761] page:
000000003e38a3d5 refcount:0 mapcount:0 mapping:
0000000000000000 index:0x0 pfn:0x37bc
[ 162.496064] flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff)
[ 162.497278] raw:
000fffffc0000000 ffffea00000df1c8 ffffea00000df008 0000000000000000
[ 162.498928] raw:
0000000000000000 0000000000240000 00000000ffffffff 0000000000000000
[ 162.500542] page dumped because: kasan: bad access detected
[ 162.501057]
[ 162.501242] Memory state around the buggy address:
[ 162.502230]
ffff8880037bc980: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 162.502977]
ffff8880037bca00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 162.503522] >
ffff8880037bca80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 162.503963] ^
[ 162.504370]
ffff8880037bcb00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 162.504766]
ffff8880037bcb80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Signed-off-by: Edward Lo <edward.lo@ambergroup.io>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pierre-Louis Bossart [Tue, 18 Oct 2022 01:25:00 +0000 (09:25 +0800)]
soundwire: dmi-quirks: add quirk variant for LAPBC710 NUC15
[ Upstream commit
f74495761df10c25a98256d16ea7465191b6e2cd ]
Some NUC15 LAPBC710 devices don't expose the same DMI information as
the Intel reference, add additional entry in the match table.
BugLink: https://github.com/thesofproject/linux/issues/3885
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20221018012500.1592994-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hawkins Jiawei [Fri, 23 Sep 2022 11:09:04 +0000 (19:09 +0800)]
fs/ntfs3: Fix slab-out-of-bounds read in run_unpack
[ Upstream commit
887bfc546097fbe8071dac13b2fef73b77920899 ]
Syzkaller reports slab-out-of-bounds bug as follows:
==================================================================
BUG: KASAN: slab-out-of-bounds in run_unpack+0x8b7/0x970 fs/ntfs3/run.c:944
Read of size 1 at addr
ffff88801bbdff02 by task syz-executor131/3611
[...]
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:317 [inline]
print_report.cold+0x2ba/0x719 mm/kasan/report.c:433
kasan_report+0xb1/0x1e0 mm/kasan/report.c:495
run_unpack+0x8b7/0x970 fs/ntfs3/run.c:944
run_unpack_ex+0xb0/0x7c0 fs/ntfs3/run.c:1057
ntfs_read_mft fs/ntfs3/inode.c:368 [inline]
ntfs_iget5+0xc20/0x3280 fs/ntfs3/inode.c:501
ntfs_loadlog_and_replay+0x124/0x5d0 fs/ntfs3/fsntfs.c:272
ntfs_fill_super+0x1eff/0x37f0 fs/ntfs3/super.c:1018
get_tree_bdev+0x440/0x760 fs/super.c:1323
vfs_get_tree+0x89/0x2f0 fs/super.c:1530
do_new_mount fs/namespace.c:3040 [inline]
path_mount+0x1326/0x1e20 fs/namespace.c:3370
do_mount fs/namespace.c:3383 [inline]
__do_sys_mount fs/namespace.c:3591 [inline]
__se_sys_mount fs/namespace.c:3568 [inline]
__x64_sys_mount+0x27f/0x300 fs/namespace.c:3568
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
[...]
</TASK>
The buggy address belongs to the physical page:
page:
ffffea00006ef600 refcount:1 mapcount:0 mapping:
0000000000000000 index:0x0 pfn:0x1bbd8
head:
ffffea00006ef600 order:3 compound_mapcount:0 compound_pincount:0
flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff)
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88801bbdfe00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88801bbdfe80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>
ffff88801bbdff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff88801bbdff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88801bbe0000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Kernel will tries to read record and parse MFT from disk in
ntfs_read_mft().
Yet the problem is that during enumerating attributes in record,
kernel doesn't check whether run_off field loading from the disk
is a valid value.
To be more specific, if attr->nres.run_off is larger than attr->size,
kernel will passes an invalid argument run_buf_size in
run_unpack_ex(), which having an integer overflow. Then this invalid
argument will triggers the slab-out-of-bounds Read bug as above.
This patch solves it by adding the sanity check between
the offset to packed runs and attribute size.
link: https://lore.kernel.org/all/0000000000009145fc05e94bd5c3@google.com/#t
Reported-and-tested-by: syzbot+8d6fbb27a6aded64b25b@syzkaller.appspotmail.com
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Edward Lo [Thu, 22 Sep 2022 16:50:23 +0000 (00:50 +0800)]
fs/ntfs3: Validate resident attribute name
[ Upstream commit
54e45702b648b7c0000e90b3e9b890e367e16ea8 ]
Though we already have some sanity checks while enumerating attributes,
resident attribute names aren't included. This patch checks the resident
attribute names are in the valid ranges.
[ 259.209031] BUG: KASAN: slab-out-of-bounds in ni_create_attr_list+0x1e1/0x850
[ 259.210770] Write of size 426 at addr
ffff88800632f2b2 by task exp/255
[ 259.211551]
[ 259.212035] CPU: 0 PID: 255 Comm: exp Not tainted 6.0.0-rc6 #37
[ 259.212955] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 259.214387] Call Trace:
[ 259.214640] <TASK>
[ 259.214895] dump_stack_lvl+0x49/0x63
[ 259.215284] print_report.cold+0xf5/0x689
[ 259.215565] ? kasan_poison+0x3c/0x50
[ 259.215778] ? kasan_unpoison+0x28/0x60
[ 259.215991] ? ni_create_attr_list+0x1e1/0x850
[ 259.216270] kasan_report+0xa7/0x130
[ 259.216481] ? ni_create_attr_list+0x1e1/0x850
[ 259.216719] kasan_check_range+0x15a/0x1d0
[ 259.216939] memcpy+0x3c/0x70
[ 259.217136] ni_create_attr_list+0x1e1/0x850
[ 259.217945] ? __rcu_read_unlock+0x5b/0x280
[ 259.218384] ? ni_remove_attr+0x2e0/0x2e0
[ 259.218712] ? kernel_text_address+0xcf/0xe0
[ 259.219064] ? __kernel_text_address+0x12/0x40
[ 259.219434] ? arch_stack_walk+0x9e/0xf0
[ 259.219668] ? __this_cpu_preempt_check+0x13/0x20
[ 259.219904] ? sysvec_apic_timer_interrupt+0x57/0xc0
[ 259.220140] ? asm_sysvec_apic_timer_interrupt+0x1b/0x20
[ 259.220561] ni_ins_attr_ext+0x52c/0x5c0
[ 259.220984] ? ni_create_attr_list+0x850/0x850
[ 259.221532] ? run_deallocate+0x120/0x120
[ 259.221972] ? vfs_setxattr+0x128/0x300
[ 259.222688] ? setxattr+0x126/0x140
[ 259.222921] ? path_setxattr+0x164/0x180
[ 259.223431] ? __x64_sys_setxattr+0x6d/0x80
[ 259.223828] ? entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 259.224417] ? mi_find_attr+0x3c/0xf0
[ 259.224772] ni_insert_attr+0x1ba/0x420
[ 259.225216] ? ni_ins_attr_ext+0x5c0/0x5c0
[ 259.225504] ? ntfs_read_ea+0x119/0x450
[ 259.225775] ni_insert_resident+0xc0/0x1c0
[ 259.226316] ? ni_insert_nonresident+0x400/0x400
[ 259.227001] ? __kasan_kmalloc+0x88/0xb0
[ 259.227468] ? __kmalloc+0x192/0x320
[ 259.227773] ntfs_set_ea+0x6bf/0xb30
[ 259.228216] ? ftrace_graph_ret_addr+0x2a/0xb0
[ 259.228494] ? entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 259.228838] ? ntfs_read_ea+0x450/0x450
[ 259.229098] ? is_bpf_text_address+0x24/0x40
[ 259.229418] ? kernel_text_address+0xcf/0xe0
[ 259.229681] ? __kernel_text_address+0x12/0x40
[ 259.229948] ? unwind_get_return_address+0x3a/0x60
[ 259.230271] ? write_profile+0x270/0x270
[ 259.230537] ? arch_stack_walk+0x9e/0xf0
[ 259.230836] ntfs_setxattr+0x114/0x5c0
[ 259.231099] ? ntfs_set_acl_ex+0x2e0/0x2e0
[ 259.231529] ? evm_protected_xattr_common+0x6d/0x100
[ 259.231817] ? posix_xattr_acl+0x13/0x80
[ 259.232073] ? evm_protect_xattr+0x1f7/0x440
[ 259.232351] __vfs_setxattr+0xda/0x120
[ 259.232635] ? xattr_resolve_name+0x180/0x180
[ 259.232912] __vfs_setxattr_noperm+0x93/0x300
[ 259.233219] __vfs_setxattr_locked+0x141/0x160
[ 259.233492] ? kasan_poison+0x3c/0x50
[ 259.233744] vfs_setxattr+0x128/0x300
[ 259.234002] ? __vfs_setxattr_locked+0x160/0x160
[ 259.234837] do_setxattr+0xb8/0x170
[ 259.235567] ? vmemdup_user+0x53/0x90
[ 259.236212] setxattr+0x126/0x140
[ 259.236491] ? do_setxattr+0x170/0x170
[ 259.236791] ? debug_smp_processor_id+0x17/0x20
[ 259.237232] ? kasan_quarantine_put+0x57/0x180
[ 259.237605] ? putname+0x80/0xa0
[ 259.237870] ? __kasan_slab_free+0x11c/0x1b0
[ 259.238234] ? putname+0x80/0xa0
[ 259.238500] ? preempt_count_sub+0x18/0xc0
[ 259.238775] ? __mnt_want_write+0xaa/0x100
[ 259.238990] ? mnt_want_write+0x8b/0x150
[ 259.239290] path_setxattr+0x164/0x180
[ 259.239605] ? setxattr+0x140/0x140
[ 259.239849] ? debug_smp_processor_id+0x17/0x20
[ 259.240174] ? fpregs_assert_state_consistent+0x67/0x80
[ 259.240411] __x64_sys_setxattr+0x6d/0x80
[ 259.240715] do_syscall_64+0x3b/0x90
[ 259.240934] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 259.241697] RIP: 0033:0x7fc6b26e4469
[ 259.242647] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 088
[ 259.244512] RSP: 002b:
00007ffc3c7841f8 EFLAGS:
00000217 ORIG_RAX:
00000000000000bc
[ 259.245086] RAX:
ffffffffffffffda RBX:
0000000000000000 RCX:
00007fc6b26e4469
[ 259.246025] RDX:
00007ffc3c784380 RSI:
00007ffc3c7842e0 RDI:
00007ffc3c784238
[ 259.246961] RBP:
00007ffc3c788410 R08:
0000000000000001 R09:
00007ffc3c7884f8
[ 259.247775] R10:
000000000000007f R11:
0000000000000217 R12:
00000000004004e0
[ 259.248534] R13:
00007ffc3c7884f0 R14:
0000000000000000 R15:
0000000000000000
[ 259.249368] </TASK>
[ 259.249644]
[ 259.249888] Allocated by task 255:
[ 259.250283] kasan_save_stack+0x26/0x50
[ 259.250957] __kasan_kmalloc+0x88/0xb0
[ 259.251826] __kmalloc+0x192/0x320
[ 259.252745] ni_create_attr_list+0x11e/0x850
[ 259.253298] ni_ins_attr_ext+0x52c/0x5c0
[ 259.253685] ni_insert_attr+0x1ba/0x420
[ 259.253974] ni_insert_resident+0xc0/0x1c0
[ 259.254311] ntfs_set_ea+0x6bf/0xb30
[ 259.254629] ntfs_setxattr+0x114/0x5c0
[ 259.254859] __vfs_setxattr+0xda/0x120
[ 259.255155] __vfs_setxattr_noperm+0x93/0x300
[ 259.255445] __vfs_setxattr_locked+0x141/0x160
[ 259.255862] vfs_setxattr+0x128/0x300
[ 259.256251] do_setxattr+0xb8/0x170
[ 259.256522] setxattr+0x126/0x140
[ 259.256911] path_setxattr+0x164/0x180
[ 259.257308] __x64_sys_setxattr+0x6d/0x80
[ 259.257637] do_syscall_64+0x3b/0x90
[ 259.257970] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 259.258550]
[ 259.258772] The buggy address belongs to the object at
ffff88800632f000
[ 259.258772] which belongs to the cache kmalloc-1k of size 1024
[ 259.260190] The buggy address is located 690 bytes inside of
[ 259.260190] 1024-byte region [
ffff88800632f000,
ffff88800632f400)
[ 259.261412]
[ 259.261743] The buggy address belongs to the physical page:
[ 259.262354] page:
0000000081e8cac9 refcount:1 mapcount:0 mapping:
0000000000000000 index:0x0 pfn:0x632c
[ 259.263722] head:
0000000081e8cac9 order:2 compound_mapcount:0 compound_pincount:0
[ 259.264284] flags: 0xfffffc0010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff)
[ 259.265312] raw:
000fffffc0010200 ffffea0000060d00 dead000000000004 ffff888001041dc0
[ 259.265772] raw:
0000000000000000 0000000080080008 00000001ffffffff 0000000000000000
[ 259.266305] page dumped because: kasan: bad access detected
[ 259.266588]
[ 259.266728] Memory state around the buggy address:
[ 259.267225]
ffff88800632f300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 259.267841]
ffff88800632f380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 259.269111] >
ffff88800632f400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 259.269626] ^
[ 259.270162]
ffff88800632f480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 259.270810]
ffff88800632f500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Signed-off-by: Edward Lo <edward.lo@ambergroup.io>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Edward Lo [Thu, 22 Sep 2022 07:30:44 +0000 (15:30 +0800)]
fs/ntfs3: Validate buffer length while parsing index
[ Upstream commit
4d42ecda239cc13738d6fd84d098a32e67b368b9 ]
indx_read is called when we have some NTFS directory operations that
need more information from the index buffers. This adds a sanity check
to make sure the returned index buffer length is legit, or we may have
some out-of-bound memory accesses.
[ 560.897595] BUG: KASAN: slab-out-of-bounds in hdr_find_e.isra.0+0x10c/0x320
[ 560.898321] Read of size 2 at addr
ffff888009497238 by task exp/245
[ 560.898760]
[ 560.899129] CPU: 0 PID: 245 Comm: exp Not tainted 6.0.0-rc6 #37
[ 560.899505] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 560.900170] Call Trace:
[ 560.900407] <TASK>
[ 560.900732] dump_stack_lvl+0x49/0x63
[ 560.901108] print_report.cold+0xf5/0x689
[ 560.901395] ? hdr_find_e.isra.0+0x10c/0x320
[ 560.901716] kasan_report+0xa7/0x130
[ 560.901950] ? hdr_find_e.isra.0+0x10c/0x320
[ 560.902208] __asan_load2+0x68/0x90
[ 560.902427] hdr_find_e.isra.0+0x10c/0x320
[ 560.902846] ? cmp_uints+0xe0/0xe0
[ 560.903363] ? cmp_sdh+0x90/0x90
[ 560.903883] ? ntfs_bread_run+0x190/0x190
[ 560.904196] ? rwsem_down_read_slowpath+0x750/0x750
[ 560.904969] ? ntfs_fix_post_read+0xe0/0x130
[ 560.905259] ? __kasan_check_write+0x14/0x20
[ 560.905599] ? up_read+0x1a/0x90
[ 560.905853] ? indx_read+0x22c/0x380
[ 560.906096] indx_find+0x2ef/0x470
[ 560.906352] ? indx_find_buffer+0x2d0/0x2d0
[ 560.906692] ? __kasan_kmalloc+0x88/0xb0
[ 560.906977] dir_search_u+0x196/0x2f0
[ 560.907220] ? ntfs_nls_to_utf16+0x450/0x450
[ 560.907464] ? __kasan_check_write+0x14/0x20
[ 560.907747] ? mutex_lock+0x8f/0xe0
[ 560.907970] ? __mutex_lock_slowpath+0x20/0x20
[ 560.908214] ? kmem_cache_alloc+0x143/0x4b0
[ 560.908459] ntfs_lookup+0xe0/0x100
[ 560.908788] __lookup_slow+0x116/0x220
[ 560.909050] ? lookup_fast+0x1b0/0x1b0
[ 560.909309] ? lookup_fast+0x13f/0x1b0
[ 560.909601] walk_component+0x187/0x230
[ 560.909944] link_path_walk.part.0+0x3f0/0x660
[ 560.910285] ? handle_lookup_down+0x90/0x90
[ 560.910618] ? path_init+0x642/0x6e0
[ 560.911084] ? percpu_counter_add_batch+0x6e/0xf0
[ 560.912559] ? __alloc_file+0x114/0x170
[ 560.913008] path_openat+0x19c/0x1d10
[ 560.913419] ? getname_flags+0x73/0x2b0
[ 560.913815] ? kasan_save_stack+0x3a/0x50
[ 560.914125] ? kasan_save_stack+0x26/0x50
[ 560.914542] ? __kasan_slab_alloc+0x6d/0x90
[ 560.914924] ? kmem_cache_alloc+0x143/0x4b0
[ 560.915339] ? getname_flags+0x73/0x2b0
[ 560.915647] ? getname+0x12/0x20
[ 560.916114] ? __x64_sys_open+0x4c/0x60
[ 560.916460] ? path_lookupat.isra.0+0x230/0x230
[ 560.916867] ? __isolate_free_page+0x2e0/0x2e0
[ 560.917194] do_filp_open+0x15c/0x1f0
[ 560.917448] ? may_open_dev+0x60/0x60
[ 560.917696] ? expand_files+0xa4/0x3a0
[ 560.917923] ? __kasan_check_write+0x14/0x20
[ 560.918185] ? _raw_spin_lock+0x88/0xdb
[ 560.918409] ? _raw_spin_lock_irqsave+0x100/0x100
[ 560.918783] ? _find_next_bit+0x4a/0x130
[ 560.919026] ? _raw_spin_unlock+0x19/0x40
[ 560.919276] ? alloc_fd+0x14b/0x2d0
[ 560.919635] do_sys_openat2+0x32a/0x4b0
[ 560.920035] ? file_open_root+0x230/0x230
[ 560.920336] ? __rcu_read_unlock+0x5b/0x280
[ 560.920813] do_sys_open+0x99/0xf0
[ 560.921208] ? filp_open+0x60/0x60
[ 560.921482] ? exit_to_user_mode_prepare+0x49/0x180
[ 560.921867] __x64_sys_open+0x4c/0x60
[ 560.922128] do_syscall_64+0x3b/0x90
[ 560.922369] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 560.923030] RIP: 0033:0x7f7dff2e4469
[ 560.923681] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 088
[ 560.924451] RSP: 002b:
00007ffd41a210b8 EFLAGS:
00000206 ORIG_RAX:
0000000000000002
[ 560.925168] RAX:
ffffffffffffffda RBX:
0000000000000000 RCX:
00007f7dff2e4469
[ 560.925655] RDX:
0000000000000000 RSI:
0000000000000002 RDI:
00007ffd41a211f0
[ 560.926085] RBP:
00007ffd41a252a0 R08:
00007f7dff60fba0 R09:
00007ffd41a25388
[ 560.926405] R10:
0000000000400b80 R11:
0000000000000206 R12:
00000000004004e0
[ 560.926867] R13:
00007ffd41a25380 R14:
0000000000000000 R15:
0000000000000000
[ 560.927241] </TASK>
[ 560.927491]
[ 560.927755] Allocated by task 245:
[ 560.928409] kasan_save_stack+0x26/0x50
[ 560.929271] __kasan_kmalloc+0x88/0xb0
[ 560.929778] __kmalloc+0x192/0x320
[ 560.930023] indx_read+0x249/0x380
[ 560.930224] indx_find+0x2a2/0x470
[ 560.930695] dir_search_u+0x196/0x2f0
[ 560.930892] ntfs_lookup+0xe0/0x100
[ 560.931115] __lookup_slow+0x116/0x220
[ 560.931323] walk_component+0x187/0x230
[ 560.931570] link_path_walk.part.0+0x3f0/0x660
[ 560.931791] path_openat+0x19c/0x1d10
[ 560.932008] do_filp_open+0x15c/0x1f0
[ 560.932226] do_sys_openat2+0x32a/0x4b0
[ 560.932413] do_sys_open+0x99/0xf0
[ 560.932709] __x64_sys_open+0x4c/0x60
[ 560.933417] do_syscall_64+0x3b/0x90
[ 560.933776] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 560.934235]
[ 560.934486] The buggy address belongs to the object at
ffff888009497000
[ 560.934486] which belongs to the cache kmalloc-512 of size 512
[ 560.935239] The buggy address is located 56 bytes to the right of
[ 560.935239] 512-byte region [
ffff888009497000,
ffff888009497200)
[ 560.936153]
[ 560.937326] The buggy address belongs to the physical page:
[ 560.938228] page:
0000000062a3dfae refcount:1 mapcount:0 mapping:
0000000000000000 index:0x0 pfn:0x9496
[ 560.939616] head:
0000000062a3dfae order:1 compound_mapcount:0 compound_pincount:0
[ 560.940219] flags: 0xfffffc0010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff)
[ 560.942702] raw:
000fffffc0010200 ffffea0000164f80 dead000000000005 ffff888001041c80
[ 560.943932] raw:
0000000000000000 0000000080080008 00000001ffffffff 0000000000000000
[ 560.944568] page dumped because: kasan: bad access detected
[ 560.945735]
[ 560.946112] Memory state around the buggy address:
[ 560.946870]
ffff888009497100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 560.947242]
ffff888009497180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 560.947611] >
ffff888009497200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 560.947915] ^
[ 560.948249]
ffff888009497280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 560.948687]
ffff888009497300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Signed-off-by: Edward Lo <edward.lo@ambergroup.io>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Edward Lo [Fri, 9 Sep 2022 01:04:00 +0000 (09:04 +0800)]
fs/ntfs3: Validate attribute name offset
[ Upstream commit
4f1dc7d9756e66f3f876839ea174df2e656b7f79 ]
Although the attribute name length is checked before comparing it to
some common names (e.g., $I30), the offset isn't. This adds a sanity
check for the attribute name offset, guarantee the validity and prevent
possible out-of-bound memory accesses.
[ 191.720056] BUG: unable to handle page fault for address:
ffffebde00000008
[ 191.721060] #PF: supervisor read access in kernel mode
[ 191.721586] #PF: error_code(0x0000) - not-present page
[ 191.722079] PGD 0 P4D 0
[ 191.722571] Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI
[ 191.723179] CPU: 0 PID: 244 Comm: mount Not tainted 6.0.0-rc4 #28
[ 191.723749] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 191.724832] RIP: 0010:kfree+0x56/0x3b0
[ 191.725870] Code: 80 48 01 d8 0f 82 65 03 00 00 48 c7 c2 00 00 00 80 48 2b 15 2c 06 dd 01 48 01 d0 48 c1 e8 0c 48 c1 e0 06 48 03 05 0a 069
[ 191.727375] RSP: 0018:
ffff8880076f7878 EFLAGS:
00000286
[ 191.727897] RAX:
ffffebde00000000 RBX:
0000000000000040 RCX:
ffffffff8528d5b9
[ 191.728531] RDX:
0000777f80000000 RSI:
ffffffff8522d49c RDI:
0000000000000040
[ 191.729183] RBP:
ffff8880076f78a0 R08:
0000000000000000 R09:
0000000000000000
[ 191.729628] R10:
ffff888008949fd8 R11:
ffffed10011293fd R12:
0000000000000040
[ 191.730158] R13:
ffff888008949f98 R14:
ffff888008949ec0 R15:
ffff888008949fb0
[ 191.730645] FS:
00007f3520cd7e40(0000) GS:
ffff88805ba00000(0000) knlGS:
0000000000000000
[ 191.731328] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 191.731667] CR2:
ffffebde00000008 CR3:
0000000009704000 CR4:
00000000000006f0
[ 191.732568] Call Trace:
[ 191.733231] <TASK>
[ 191.733860] kvfree+0x2c/0x40
[ 191.734632] ni_clear+0x180/0x290
[ 191.735085] ntfs_evict_inode+0x45/0x70
[ 191.735495] evict+0x199/0x280
[ 191.735996] iput.part.0+0x286/0x320
[ 191.736438] iput+0x32/0x50
[ 191.736811] iget_failed+0x23/0x30
[ 191.737270] ntfs_iget5+0x337/0x1890
[ 191.737629] ? ntfs_clear_mft_tail+0x20/0x260
[ 191.738201] ? ntfs_get_block_bmap+0x70/0x70
[ 191.738482] ? ntfs_objid_init+0xf6/0x140
[ 191.738779] ? ntfs_reparse_init+0x140/0x140
[ 191.739266] ntfs_fill_super+0x121b/0x1b50
[ 191.739623] ? put_ntfs+0x1d0/0x1d0
[ 191.739984] ? asm_sysvec_apic_timer_interrupt+0x1b/0x20
[ 191.740466] ? put_ntfs+0x1d0/0x1d0
[ 191.740787] ? sb_set_blocksize+0x6a/0x80
[ 191.741272] get_tree_bdev+0x232/0x370
[ 191.741829] ? put_ntfs+0x1d0/0x1d0
[ 191.742669] ntfs_fs_get_tree+0x15/0x20
[ 191.743132] vfs_get_tree+0x4c/0x130
[ 191.743457] path_mount+0x654/0xfe0
[ 191.743938] ? putname+0x80/0xa0
[ 191.744271] ? finish_automount+0x2e0/0x2e0
[ 191.744582] ? putname+0x80/0xa0
[ 191.745053] ? kmem_cache_free+0x1c4/0x440
[ 191.745403] ? putname+0x80/0xa0
[ 191.745616] do_mount+0xd6/0xf0
[ 191.745887] ? path_mount+0xfe0/0xfe0
[ 191.746287] ? __kasan_check_write+0x14/0x20
[ 191.746582] __x64_sys_mount+0xca/0x110
[ 191.746850] do_syscall_64+0x3b/0x90
[ 191.747122] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 191.747517] RIP: 0033:0x7f351fee948a
[ 191.748332] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008
[ 191.749341] RSP: 002b:
00007ffd51cf3af8 EFLAGS:
00000202 ORIG_RAX:
00000000000000a5
[ 191.749960] RAX:
ffffffffffffffda RBX:
000055b903733060 RCX:
00007f351fee948a
[ 191.750589] RDX:
000055b903733260 RSI:
000055b9037332e0 RDI:
000055b90373bce0
[ 191.751115] RBP:
0000000000000000 R08:
000055b903733280 R09:
0000000000000020
[ 191.751537] R10:
00000000c0ed0000 R11:
0000000000000202 R12:
000055b90373bce0
[ 191.751946] R13:
000055b903733260 R14:
0000000000000000 R15:
00000000ffffffff
[ 191.752519] </TASK>
[ 191.752782] Modules linked in:
[ 191.753785] CR2:
ffffebde00000008
[ 191.754937] ---[ end trace
0000000000000000 ]---
[ 191.755429] RIP: 0010:kfree+0x56/0x3b0
[ 191.755725] Code: 80 48 01 d8 0f 82 65 03 00 00 48 c7 c2 00 00 00 80 48 2b 15 2c 06 dd 01 48 01 d0 48 c1 e8 0c 48 c1 e0 06 48 03 05 0a 069
[ 191.756744] RSP: 0018:
ffff8880076f7878 EFLAGS:
00000286
[ 191.757218] RAX:
ffffebde00000000 RBX:
0000000000000040 RCX:
ffffffff8528d5b9
[ 191.757580] RDX:
0000777f80000000 RSI:
ffffffff8522d49c RDI:
0000000000000040
[ 191.758016] RBP:
ffff8880076f78a0 R08:
0000000000000000 R09:
0000000000000000
[ 191.758570] R10:
ffff888008949fd8 R11:
ffffed10011293fd R12:
0000000000000040
[ 191.758957] R13:
ffff888008949f98 R14:
ffff888008949ec0 R15:
ffff888008949fb0
[ 191.759317] FS:
00007f3520cd7e40(0000) GS:
ffff88805ba00000(0000) knlGS:
0000000000000000
[ 191.759711] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 191.760118] CR2:
ffffebde00000008 CR3:
0000000009704000 CR4:
00000000000006f0
Signed-off-by: Edward Lo <edward.lo@ambergroup.io>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Edward Lo [Fri, 9 Sep 2022 01:03:10 +0000 (09:03 +0800)]
fs/ntfs3: Add null pointer check for inode operations
[ Upstream commit
c1ca8ef0262b25493631ecbd9cb8c9893e1481a1 ]
This adds a sanity check for the i_op pointer of the inode which is
returned after reading Root directory MFT record. We should check the
i_op is valid before trying to create the root dentry, otherwise we may
encounter a NPD while mounting a image with a funny Root directory MFT
record.
[ 114.484325] BUG: kernel NULL pointer dereference, address:
0000000000000008
[ 114.484811] #PF: supervisor read access in kernel mode
[ 114.485084] #PF: error_code(0x0000) - not-present page
[ 114.485606] PGD 0 P4D 0
[ 114.485975] Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI
[ 114.486570] CPU: 0 PID: 237 Comm: mount Tainted: G B 6.0.0-rc4 #28
[ 114.486977] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 114.488169] RIP: 0010:d_flags_for_inode+0xe0/0x110
[ 114.488816] Code: 24 f7 ff 49 83 3e 00 74 41 41 83 cd 02 66 44 89 6b 02 eb 92 48 8d 7b 20 e8 6d 24 f7 ff 4c 8b 73 20 49 8d 7e 08 e8 60 241
[ 114.490326] RSP: 0018:
ffff8880065e7aa8 EFLAGS:
00000296
[ 114.490695] RAX:
0000000000000001 RBX:
ffff888008ccd750 RCX:
ffffffff84af2aea
[ 114.490986] RDX:
0000000000000001 RSI:
0000000000000008 RDI:
ffffffff87abd020
[ 114.491364] RBP:
ffff8880065e7ac8 R08:
0000000000000001 R09:
fffffbfff0f57a05
[ 114.491675] R10:
ffffffff87abd027 R11:
fffffbfff0f57a04 R12:
0000000000000000
[ 114.491954] R13:
0000000000000008 R14:
0000000000000000 R15:
ffff888008ccd750
[ 114.492397] FS:
00007fdc8a627e40(0000) GS:
ffff888058200000(0000) knlGS:
0000000000000000
[ 114.492797] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 114.493150] CR2:
0000000000000008 CR3:
00000000013ba000 CR4:
00000000000006f0
[ 114.493671] Call Trace:
[ 114.493890] <TASK>
[ 114.494075] __d_instantiate+0x24/0x1c0
[ 114.494505] d_instantiate.part.0+0x35/0x50
[ 114.494754] d_make_root+0x53/0x80
[ 114.494998] ntfs_fill_super+0x1232/0x1b50
[ 114.495260] ? put_ntfs+0x1d0/0x1d0
[ 114.495499] ? vsprintf+0x20/0x20
[ 114.495723] ? set_blocksize+0x95/0x150
[ 114.495964] get_tree_bdev+0x232/0x370
[ 114.496272] ? put_ntfs+0x1d0/0x1d0
[ 114.496502] ntfs_fs_get_tree+0x15/0x20
[ 114.496859] vfs_get_tree+0x4c/0x130
[ 114.497099] path_mount+0x654/0xfe0
[ 114.497507] ? putname+0x80/0xa0
[ 114.497933] ? finish_automount+0x2e0/0x2e0
[ 114.498362] ? putname+0x80/0xa0
[ 114.498571] ? kmem_cache_free+0x1c4/0x440
[ 114.498819] ? putname+0x80/0xa0
[ 114.499069] do_mount+0xd6/0xf0
[ 114.499343] ? path_mount+0xfe0/0xfe0
[ 114.499683] ? __kasan_check_write+0x14/0x20
[ 114.500133] __x64_sys_mount+0xca/0x110
[ 114.500592] do_syscall_64+0x3b/0x90
[ 114.500930] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 114.501294] RIP: 0033:0x7fdc898e948a
[ 114.501542] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008
[ 114.502716] RSP: 002b:
00007ffd793e58f8 EFLAGS:
00000202 ORIG_RAX:
00000000000000a5
[ 114.503175] RAX:
ffffffffffffffda RBX:
0000564b2228f060 RCX:
00007fdc898e948a
[ 114.503588] RDX:
0000564b2228f260 RSI:
0000564b2228f2e0 RDI:
0000564b22297ce0
[ 114.504925] RBP:
0000000000000000 R08:
0000564b2228f280 R09:
0000000000000020
[ 114.505484] R10:
00000000c0ed0000 R11:
0000000000000202 R12:
0000564b22297ce0
[ 114.505823] R13:
0000564b2228f260 R14:
0000000000000000 R15:
00000000ffffffff
[ 114.506562] </TASK>
[ 114.506887] Modules linked in:
[ 114.507648] CR2:
0000000000000008
[ 114.508884] ---[ end trace
0000000000000000 ]---
[ 114.509675] RIP: 0010:d_flags_for_inode+0xe0/0x110
[ 114.510140] Code: 24 f7 ff 49 83 3e 00 74 41 41 83 cd 02 66 44 89 6b 02 eb 92 48 8d 7b 20 e8 6d 24 f7 ff 4c 8b 73 20 49 8d 7e 08 e8 60 241
[ 114.511762] RSP: 0018:
ffff8880065e7aa8 EFLAGS:
00000296
[ 114.512401] RAX:
0000000000000001 RBX:
ffff888008ccd750 RCX:
ffffffff84af2aea
[ 114.513103] RDX:
0000000000000001 RSI:
0000000000000008 RDI:
ffffffff87abd020
[ 114.513512] RBP:
ffff8880065e7ac8 R08:
0000000000000001 R09:
fffffbfff0f57a05
[ 114.513831] R10:
ffffffff87abd027 R11:
fffffbfff0f57a04 R12:
0000000000000000
[ 114.514757] R13:
0000000000000008 R14:
0000000000000000 R15:
ffff888008ccd750
[ 114.515411] FS:
00007fdc8a627e40(0000) GS:
ffff888058200000(0000) knlGS:
0000000000000000
[ 114.515794] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 114.516208] CR2:
0000000000000008 CR3:
00000000013ba000 CR4:
00000000000006f0
Signed-off-by: Edward Lo <edward.lo@ambergroup.io>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shigeru Yoshida [Tue, 23 Aug 2022 10:32:05 +0000 (19:32 +0900)]
fs/ntfs3: Fix memory leak on ntfs_fill_super() error path
[ Upstream commit
51e76a232f8c037f1d9e9922edc25b003d5f3414 ]
syzbot reported kmemleak as below:
BUG: memory leak
unreferenced object 0xffff8880122f1540 (size 32):
comm "a.out", pid 6664, jiffies
4294939771 (age 25.500s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 ed ff ed ff 00 00 00 00 ................
backtrace:
[<
ffffffff81b16052>] ntfs_init_fs_context+0x22/0x1c0
[<
ffffffff8164aaa7>] alloc_fs_context+0x217/0x430
[<
ffffffff81626dd4>] path_mount+0x704/0x1080
[<
ffffffff81627e7c>] __x64_sys_mount+0x18c/0x1d0
[<
ffffffff84593e14>] do_syscall_64+0x34/0xb0
[<
ffffffff84600087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
This patch fixes this issue by freeing mount options on error path of
ntfs_fill_super().
Reported-by: syzbot+9d67170b20e8f94351c8@syzkaller.appspotmail.com
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Edward Lo [Sat, 6 Aug 2022 17:05:18 +0000 (01:05 +0800)]
fs/ntfs3: Add null pointer check to attr_load_runs_vcn
[ Upstream commit
2681631c29739509eec59cc0b34e977bb04c6cf1 ]
Some metadata files are handled before MFT. This adds a null pointer
check for some corner cases that could lead to NPD while reading these
metadata files for a malformed NTFS image.
[ 240.190827] BUG: kernel NULL pointer dereference, address:
0000000000000158
[ 240.191583] #PF: supervisor read access in kernel mode
[ 240.191956] #PF: error_code(0x0000) - not-present page
[ 240.192391] PGD 0 P4D 0
[ 240.192897] Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI
[ 240.193805] CPU: 0 PID: 242 Comm: mount Tainted: G B 5.19.0+ #17
[ 240.194477] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 240.195152] RIP: 0010:ni_find_attr+0xae/0x300
[ 240.195679] Code: c8 48 c7 45 88 c0 4e 5e 86 c7 00 f1 f1 f1 f1 c7 40 04 00 f3 f3 f3 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 e8 e2 d9f
[ 240.196642] RSP: 0018:
ffff88800812f690 EFLAGS:
00000286
[ 240.197019] RAX:
0000000000000001 RBX:
0000000000000000 RCX:
ffffffff85ef037a
[ 240.197523] RDX:
0000000000000001 RSI:
0000000000000008 RDI:
ffffffff88e95f60
[ 240.197877] RBP:
ffff88800812f738 R08:
0000000000000001 R09:
fffffbfff11d2bed
[ 240.198292] R10:
ffffffff88e95f67 R11:
fffffbfff11d2bec R12:
0000000000000000
[ 240.198647] R13:
0000000000000080 R14:
0000000000000000 R15:
0000000000000000
[ 240.199410] FS:
00007f233c33be40(0000) GS:
ffff888058200000(0000) knlGS:
0000000000000000
[ 240.199895] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 240.200314] CR2:
0000000000000158 CR3:
0000000004d32000 CR4:
00000000000006f0
[ 240.200839] Call Trace:
[ 240.201104] <TASK>
[ 240.201502] ? ni_load_mi+0x80/0x80
[ 240.202297] ? ___slab_alloc+0x465/0x830
[ 240.202614] attr_load_runs_vcn+0x8c/0x1a0
[ 240.202886] ? __kasan_slab_alloc+0x32/0x90
[ 240.203157] ? attr_data_write_resident+0x250/0x250
[ 240.203543] mi_read+0x133/0x2c0
[ 240.203785] mi_get+0x70/0x140
[ 240.204012] ni_load_mi_ex+0xfa/0x190
[ 240.204346] ? ni_std5+0x90/0x90
[ 240.204588] ? __kasan_kmalloc+0x88/0xb0
[ 240.204859] ni_enum_attr_ex+0xf1/0x1c0
[ 240.205107] ? ni_fname_type.part.0+0xd0/0xd0
[ 240.205600] ? ntfs_load_attr_list+0xbe/0x300
[ 240.205864] ? ntfs_cmp_names_cpu+0x125/0x180
[ 240.206157] ntfs_iget5+0x56c/0x1870
[ 240.206510] ? ntfs_get_block_bmap+0x70/0x70
[ 240.206776] ? __kasan_kmalloc+0x88/0xb0
[ 240.207030] ? set_blocksize+0x95/0x150
[ 240.207545] ntfs_fill_super+0xb8f/0x1e20
[ 240.207839] ? put_ntfs+0x1d0/0x1d0
[ 240.208069] ? vsprintf+0x20/0x20
[ 240.208467] ? mutex_unlock+0x81/0xd0
[ 240.208846] ? set_blocksize+0x95/0x150
[ 240.209221] get_tree_bdev+0x232/0x370
[ 240.209804] ? put_ntfs+0x1d0/0x1d0
[ 240.210519] ntfs_fs_get_tree+0x15/0x20
[ 240.210991] vfs_get_tree+0x4c/0x130
[ 240.211455] path_mount+0x645/0xfd0
[ 240.211806] ? putname+0x80/0xa0
[ 240.212112] ? finish_automount+0x2e0/0x2e0
[ 240.212559] ? kmem_cache_free+0x110/0x390
[ 240.212906] ? putname+0x80/0xa0
[ 240.213329] do_mount+0xd6/0xf0
[ 240.213829] ? path_mount+0xfd0/0xfd0
[ 240.214246] ? __kasan_check_write+0x14/0x20
[ 240.214774] __x64_sys_mount+0xca/0x110
[ 240.215080] do_syscall_64+0x3b/0x90
[ 240.215442] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 240.215811] RIP: 0033:0x7f233b4e948a
[ 240.216104] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008
[ 240.217615] RSP: 002b:
00007fff02211ec8 EFLAGS:
00000202 ORIG_RAX:
00000000000000a5
[ 240.218718] RAX:
ffffffffffffffda RBX:
0000561cdc35b060 RCX:
00007f233b4e948a
[ 240.219556] RDX:
0000561cdc35b260 RSI:
0000561cdc35b2e0 RDI:
0000561cdc363af0
[ 240.219975] RBP:
0000000000000000 R08:
0000561cdc35b280 R09:
0000000000000020
[ 240.220403] R10:
00000000c0ed0000 R11:
0000000000000202 R12:
0000561cdc363af0
[ 240.220803] R13:
0000561cdc35b260 R14:
0000000000000000 R15:
00000000ffffffff
[ 240.221256] </TASK>
[ 240.221567] Modules linked in:
[ 240.222028] CR2:
0000000000000158
[ 240.223291] ---[ end trace
0000000000000000 ]---
[ 240.223669] RIP: 0010:ni_find_attr+0xae/0x300
[ 240.224058] Code: c8 48 c7 45 88 c0 4e 5e 86 c7 00 f1 f1 f1 f1 c7 40 04 00 f3 f3 f3 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 e8 e2 d9f
[ 240.225033] RSP: 0018:
ffff88800812f690 EFLAGS:
00000286
[ 240.225968] RAX:
0000000000000001 RBX:
0000000000000000 RCX:
ffffffff85ef037a
[ 240.226624] RDX:
0000000000000001 RSI:
0000000000000008 RDI:
ffffffff88e95f60
[ 240.227307] RBP:
ffff88800812f738 R08:
0000000000000001 R09:
fffffbfff11d2bed
[ 240.227816] R10:
ffffffff88e95f67 R11:
fffffbfff11d2bec R12:
0000000000000000
[ 240.228330] R13:
0000000000000080 R14:
0000000000000000 R15:
0000000000000000
[ 240.228729] FS:
00007f233c33be40(0000) GS:
ffff888058200000(0000) knlGS:
0000000000000000
[ 240.229281] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 240.230298] CR2:
0000000000000158 CR3:
0000000004d32000 CR4:
00000000000006f0
Signed-off-by: Edward Lo <edward.lo@ambergroup.io>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Edward Lo [Fri, 5 Aug 2022 16:47:27 +0000 (00:47 +0800)]
fs/ntfs3: Validate data run offset
[ Upstream commit
6db620863f8528ed9a9aa5ad323b26554a17881d ]
This adds sanity checks for data run offset. We should make sure data
run offset is legit before trying to unpack them, otherwise we may
encounter use-after-free or some unexpected memory access behaviors.
[ 82.940342] BUG: KASAN: use-after-free in run_unpack+0x2e3/0x570
[ 82.941180] Read of size 1 at addr
ffff888008a8487f by task mount/240
[ 82.941670]
[ 82.942069] CPU: 0 PID: 240 Comm: mount Not tainted 5.19.0+ #15
[ 82.942482] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 82.943720] Call Trace:
[ 82.944204] <TASK>
[ 82.944471] dump_stack_lvl+0x49/0x63
[ 82.944908] print_report.cold+0xf5/0x67b
[ 82.945141] ? __wait_on_bit+0x106/0x120
[ 82.945750] ? run_unpack+0x2e3/0x570
[ 82.946626] kasan_report+0xa7/0x120
[ 82.947046] ? run_unpack+0x2e3/0x570
[ 82.947280] __asan_load1+0x51/0x60
[ 82.947483] run_unpack+0x2e3/0x570
[ 82.947709] ? memcpy+0x4e/0x70
[ 82.947927] ? run_pack+0x7a0/0x7a0
[ 82.948158] run_unpack_ex+0xad/0x3f0
[ 82.948399] ? mi_enum_attr+0x14a/0x200
[ 82.948717] ? run_unpack+0x570/0x570
[ 82.949072] ? ni_enum_attr_ex+0x1b2/0x1c0
[ 82.949332] ? ni_fname_type.part.0+0xd0/0xd0
[ 82.949611] ? mi_read+0x262/0x2c0
[ 82.949970] ? ntfs_cmp_names_cpu+0x125/0x180
[ 82.950249] ntfs_iget5+0x632/0x1870
[ 82.950621] ? ntfs_get_block_bmap+0x70/0x70
[ 82.951192] ? evict+0x223/0x280
[ 82.951525] ? iput.part.0+0x286/0x320
[ 82.951969] ntfs_fill_super+0x1321/0x1e20
[ 82.952436] ? put_ntfs+0x1d0/0x1d0
[ 82.952822] ? vsprintf+0x20/0x20
[ 82.953188] ? mutex_unlock+0x81/0xd0
[ 82.953379] ? set_blocksize+0x95/0x150
[ 82.954001] get_tree_bdev+0x232/0x370
[ 82.954438] ? put_ntfs+0x1d0/0x1d0
[ 82.954700] ntfs_fs_get_tree+0x15/0x20
[ 82.955049] vfs_get_tree+0x4c/0x130
[ 82.955292] path_mount+0x645/0xfd0
[ 82.955615] ? putname+0x80/0xa0
[ 82.955955] ? finish_automount+0x2e0/0x2e0
[ 82.956310] ? kmem_cache_free+0x110/0x390
[ 82.956723] ? putname+0x80/0xa0
[ 82.957023] do_mount+0xd6/0xf0
[ 82.957411] ? path_mount+0xfd0/0xfd0
[ 82.957638] ? __kasan_check_write+0x14/0x20
[ 82.957948] __x64_sys_mount+0xca/0x110
[ 82.958310] do_syscall_64+0x3b/0x90
[ 82.958719] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 82.959341] RIP: 0033:0x7fd0d1ce948a
[ 82.960193] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008
[ 82.961532] RSP: 002b:
00007ffe59ff69a8 EFLAGS:
00000202 ORIG_RAX:
00000000000000a5
[ 82.962527] RAX:
ffffffffffffffda RBX:
0000564dcc107060 RCX:
00007fd0d1ce948a
[ 82.963266] RDX:
0000564dcc107260 RSI:
0000564dcc1072e0 RDI:
0000564dcc10fce0
[ 82.963686] RBP:
0000000000000000 R08:
0000564dcc107280 R09:
0000000000000020
[ 82.964272] R10:
00000000c0ed0000 R11:
0000000000000202 R12:
0000564dcc10fce0
[ 82.964785] R13:
0000564dcc107260 R14:
0000000000000000 R15:
00000000ffffffff
Signed-off-by: Edward Lo <edward.lo@ambergroup.io>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
edward lo [Mon, 1 Aug 2022 10:20:51 +0000 (18:20 +0800)]
fs/ntfs3: Add overflow check for attribute size
[ Upstream commit
e19c6277652efba203af4ecd8eed4bd30a0054c9 ]
The offset addition could overflow and pass the used size check given an
attribute with very large size (e.g., 0xffffff7f) while parsing MFT
attributes. This could lead to out-of-bound memory R/W if we try to
access the next attribute derived by Add2Ptr(attr, asize)
[ 32.963847] BUG: unable to handle page fault for address:
ffff956a83c76067
[ 32.964301] #PF: supervisor read access in kernel mode
[ 32.964526] #PF: error_code(0x0000) - not-present page
[ 32.964893] PGD
4dc01067 P4D
4dc01067 PUD 0
[ 32.965316] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 32.965727] CPU: 0 PID: 243 Comm: mount Not tainted 5.19.0+ #6
[ 32.966050] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 32.966628] RIP: 0010:mi_enum_attr+0x44/0x110
[ 32.967239] Code: 89 f0 48 29 c8 48 89 c1 39 c7 0f 86 94 00 00 00 8b 56 04 83 fa 17 0f 86 88 00 00 00 89 d0 01 ca 48 01 f0 8d 4a 08 39 f9a
[ 32.968101] RSP: 0018:
ffffba15c06a7c38 EFLAGS:
00000283
[ 32.968364] RAX:
ffff956a83c76067 RBX:
ffff956983c76050 RCX:
000000000000006f
[ 32.968651] RDX:
0000000000000067 RSI:
ffff956983c760e8 RDI:
00000000000001c8
[ 32.968963] RBP:
ffffba15c06a7c38 R08:
0000000000000064 R09:
00000000ffffff7f
[ 32.969249] R10:
0000000000000007 R11:
ffff956983c760e8 R12:
ffff95698225e000
[ 32.969870] R13:
0000000000000000 R14:
ffffba15c06a7cd8 R15:
ffff95698225e170
[ 32.970655] FS:
00007fdab8189e40(0000) GS:
ffff9569fdc00000(0000) knlGS:
0000000000000000
[ 32.971098] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 32.971378] CR2:
ffff956a83c76067 CR3:
0000000002c58000 CR4:
00000000000006f0
[ 32.972098] Call Trace:
[ 32.972842] <TASK>
[ 32.973341] ni_enum_attr_ex+0xda/0xf0
[ 32.974087] ntfs_iget5+0x1db/0xde0
[ 32.974386] ? slab_post_alloc_hook+0x53/0x270
[ 32.974778] ? ntfs_fill_super+0x4c7/0x12a0
[ 32.975115] ntfs_fill_super+0x5d6/0x12a0
[ 32.975336] get_tree_bdev+0x175/0x270
[ 32.975709] ? put_ntfs+0x150/0x150
[ 32.975956] ntfs_fs_get_tree+0x15/0x20
[ 32.976191] vfs_get_tree+0x2a/0xc0
[ 32.976374] ? capable+0x19/0x20
[ 32.976572] path_mount+0x484/0xaa0
[ 32.977025] ? putname+0x57/0x70
[ 32.977380] do_mount+0x80/0xa0
[ 32.977555] __x64_sys_mount+0x8b/0xe0
[ 32.978105] do_syscall_64+0x3b/0x90
[ 32.978830] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 32.979311] RIP: 0033:0x7fdab72e948a
[ 32.980015] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008
[ 32.981251] RSP: 002b:
00007ffd15b87588 EFLAGS:
00000206 ORIG_RAX:
00000000000000a5
[ 32.981832] RAX:
ffffffffffffffda RBX:
0000557de0aaf060 RCX:
00007fdab72e948a
[ 32.982234] RDX:
0000557de0aaf260 RSI:
0000557de0aaf2e0 RDI:
0000557de0ab7ce0
[ 32.982714] RBP:
0000000000000000 R08:
0000557de0aaf280 R09:
0000000000000020
[ 32.983046] R10:
00000000c0ed0000 R11:
0000000000000206 R12:
0000557de0ab7ce0
[ 32.983494] R13:
0000557de0aaf260 R14:
0000000000000000 R15:
00000000ffffffff
[ 32.984094] </TASK>
[ 32.984352] Modules linked in:
[ 32.984753] CR2:
ffff956a83c76067
[ 32.985911] ---[ end trace
0000000000000000 ]---
[ 32.986555] RIP: 0010:mi_enum_attr+0x44/0x110
[ 32.987217] Code: 89 f0 48 29 c8 48 89 c1 39 c7 0f 86 94 00 00 00 8b 56 04 83 fa 17 0f 86 88 00 00 00 89 d0 01 ca 48 01 f0 8d 4a 08 39 f9a
[ 32.988232] RSP: 0018:
ffffba15c06a7c38 EFLAGS:
00000283
[ 32.988532] RAX:
ffff956a83c76067 RBX:
ffff956983c76050 RCX:
000000000000006f
[ 32.988916] RDX:
0000000000000067 RSI:
ffff956983c760e8 RDI:
00000000000001c8
[ 32.989356] RBP:
ffffba15c06a7c38 R08:
0000000000000064 R09:
00000000ffffff7f
[ 32.989994] R10:
0000000000000007 R11:
ffff956983c760e8 R12:
ffff95698225e000
[ 32.990415] R13:
0000000000000000 R14:
ffffba15c06a7cd8 R15:
ffff95698225e170
[ 32.991011] FS:
00007fdab8189e40(0000) GS:
ffff9569fdc00000(0000) knlGS:
0000000000000000
[ 32.991524] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 32.991936] CR2:
ffff956a83c76067 CR3:
0000000002c58000 CR4:
00000000000006f0
This patch adds an overflow check
Signed-off-by: edward lo <edward.lo@ambergroup.io>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
edward lo [Mon, 1 Aug 2022 07:37:31 +0000 (15:37 +0800)]
fs/ntfs3: Validate BOOT record_size
[ Upstream commit
0b66046266690454dc04e6307bcff4a5605b42a1 ]
When the NTFS BOOT record_size field < 0, it represents a
shift value. However, there is no sanity check on the shift result
and the sbi->record_bits calculation through blksize_bits() assumes
the size always > 256, which could lead to NPD while mounting a
malformed NTFS image.
[ 318.675159] BUG: kernel NULL pointer dereference, address:
0000000000000158
[ 318.675682] #PF: supervisor read access in kernel mode
[ 318.675869] #PF: error_code(0x0000) - not-present page
[ 318.676246] PGD 0 P4D 0
[ 318.676502] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 318.676934] CPU: 0 PID: 259 Comm: mount Not tainted 5.19.0 #5
[ 318.677289] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 318.678136] RIP: 0010:ni_find_attr+0x2d/0x1c0
[ 318.678656] Code: 89 ca 4d 89 c7 41 56 41 55 41 54 41 89 cc 55 48 89 fd 53 48 89 d3 48 83 ec 20 65 48 8b 04 25 28 00 00 00 48 89 44 24 180
[ 318.679848] RSP: 0018:
ffffa6c8c0297bd8 EFLAGS:
00000246
[ 318.680104] RAX:
0000000000000000 RBX:
0000000000000000 RCX:
0000000000000080
[ 318.680790] RDX:
0000000000000000 RSI:
0000000000000000 RDI:
0000000000000000
[ 318.681679] RBP:
0000000000000000 R08:
0000000000000000 R09:
0000000000000000
[ 318.682577] R10:
0000000000000000 R11:
0000000000000005 R12:
0000000000000080
[ 318.683015] R13:
ffff8d5582e68400 R14:
0000000000000100 R15:
0000000000000000
[ 318.683618] FS:
00007fd9e1c81e40(0000) GS:
ffff8d55fdc00000(0000) knlGS:
0000000000000000
[ 318.684280] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 318.684651] CR2:
0000000000000158 CR3:
0000000002e1a000 CR4:
00000000000006f0
[ 318.685623] Call Trace:
[ 318.686607] <TASK>
[ 318.686872] ? ntfs_alloc_inode+0x1a/0x60
[ 318.687235] attr_load_runs_vcn+0x2b/0xa0
[ 318.687468] mi_read+0xbb/0x250
[ 318.687576] ntfs_iget5+0x114/0xd90
[ 318.687750] ntfs_fill_super+0x588/0x11b0
[ 318.687953] ? put_ntfs+0x130/0x130
[ 318.688065] ? snprintf+0x49/0x70
[ 318.688164] ? put_ntfs+0x130/0x130
[ 318.688256] get_tree_bdev+0x16a/0x260
[ 318.688407] vfs_get_tree+0x20/0xb0
[ 318.688519] path_mount+0x2dc/0x9b0
[ 318.688877] do_mount+0x74/0x90
[ 318.689142] __x64_sys_mount+0x89/0xd0
[ 318.689636] do_syscall_64+0x3b/0x90
[ 318.689998] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 318.690318] RIP: 0033:0x7fd9e133c48a
[ 318.690687] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008
[ 318.691357] RSP: 002b:
00007ffd374406c8 EFLAGS:
00000202 ORIG_RAX:
00000000000000a5
[ 318.691632] RAX:
ffffffffffffffda RBX:
0000564d0b051080 RCX:
00007fd9e133c48a
[ 318.691920] RDX:
0000564d0b051280 RSI:
0000564d0b051300 RDI:
0000564d0b0596a0
[ 318.692123] RBP:
0000000000000000 R08:
0000564d0b0512a0 R09:
0000000000000020
[ 318.692349] R10:
00000000c0ed0000 R11:
0000000000000202 R12:
0000564d0b0596a0
[ 318.692673] R13:
0000564d0b051280 R14:
0000000000000000 R15:
00000000ffffffff
[ 318.693007] </TASK>
[ 318.693271] Modules linked in:
[ 318.693614] CR2:
0000000000000158
[ 318.694446] ---[ end trace
0000000000000000 ]---
[ 318.694779] RIP: 0010:ni_find_attr+0x2d/0x1c0
[ 318.694952] Code: 89 ca 4d 89 c7 41 56 41 55 41 54 41 89 cc 55 48 89 fd 53 48 89 d3 48 83 ec 20 65 48 8b 04 25 28 00 00 00 48 89 44 24 180
[ 318.696042] RSP: 0018:
ffffa6c8c0297bd8 EFLAGS:
00000246
[ 318.696531] RAX:
0000000000000000 RBX:
0000000000000000 RCX:
0000000000000080
[ 318.698114] RDX:
0000000000000000 RSI:
0000000000000000 RDI:
0000000000000000
[ 318.699286] RBP:
0000000000000000 R08:
0000000000000000 R09:
0000000000000000
[ 318.699795] R10:
0000000000000000 R11:
0000000000000005 R12:
0000000000000080
[ 318.700236] R13:
ffff8d5582e68400 R14:
0000000000000100 R15:
0000000000000000
[ 318.700973] FS:
00007fd9e1c81e40(0000) GS:
ffff8d55fdc00000(0000) knlGS:
0000000000000000
[ 318.701688] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 318.702190] CR2:
0000000000000158 CR3:
0000000002e1a000 CR4:
00000000000006f0
[ 318.726510] mount (259) used greatest stack depth: 13320 bytes left
This patch adds a sanity check.
Signed-off-by: edward lo <edward.lo@ambergroup.io>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christoph Hellwig [Wed, 21 Dec 2022 08:51:19 +0000 (09:51 +0100)]
nvmet: don't defer passthrough commands with trivial effects to the workqueue
[ Upstream commit
2a459f6933e1c459bffb7cc73fd6c900edc714bd ]
Mask out the "Command Supported" and "Logical Block Content Change" bits
and only defer execution of commands that have non-trivial effects to
the workqueue for synchronous execution. This allows to execute admin
commands asynchronously on controllers that provide a Command Supported
and Effects log page, and will keep allowing to execute Write commands
asynchronously once command effects on I/O commands are taken into
account.
Fixes:
c1fef73f793b ("nvmet: add passthru code to process commands")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christoph Hellwig [Wed, 21 Dec 2022 09:30:45 +0000 (10:30 +0100)]
nvme: fix the NVME_CMD_EFFECTS_CSE_MASK definition
[ Upstream commit
685e6311637e46f3212439ce2789f8a300e5050f ]
3 << 16 does not generate the correct mask for bits 16, 17 and 18.
Use the GENMASK macro to generate the correct mask instead.
Fixes:
84fef62d135b ("nvme: check admin passthru command effects")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Adam Vodopjan [Fri, 9 Dec 2022 09:26:34 +0000 (09:26 +0000)]
ata: ahci: Fix PCS quirk application for suspend
[ Upstream commit
37e14e4f3715428b809e4df9a9958baa64c77d51 ]
Since kernel 5.3.4 my laptop (ICH8M controller) does not see Kingston
SV300S37A60G SSD disk connected into a SATA connector on wake from
suspend. The problem was introduced in
c312ef176399 ("libata/ahci: Drop
PCS quirk for Denverton and beyond"): the quirk is not applied on wake
from suspend as it originally was.
It is worth to mention the commit contained another bug: the quirk is
not applied at all to controllers which require it. The fix commit
09d6ac8dc51a ("libata/ahci: Fix PCS quirk application") landed in 5.3.8.
So testing my patch anywhere between commits
c312ef176399 and
09d6ac8dc51a is pointless.
Not all disks trigger the problem. For example nothing bad happens with
Western Digital WD5000LPCX HDD.
Test hardware:
- Acer 5920G with ICH8M SATA controller
- sda: some SATA HDD connnected into the DVD drive IDE port with a
SATA-IDE caddy. It is a boot disk
- sdb: Kingston SV300S37A60G SSD connected into the only SATA port
Sample "dmesg --notime | grep -E '^(sd |ata)'" output on wake:
sd 0:0:0:0: [sda] Starting disk
sd 2:0:0:0: [sdb] Starting disk
ata4: SATA link down (SStatus 4 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
ata1: FORCE: cable set to 80c
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata3.00: disabled
sd 2:0:0:0: rejecting I/O to offline device
ata3.00: detaching (SCSI 2:0:0:0)
sd 2:0:0:0: [sdb] Start/Stop Unit failed: Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result:
hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
sd 2:0:0:0: [sdb] Stopping disk
sd 2:0:0:0: [sdb] Start/Stop Unit failed: Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK
Commit
c312ef176399 dropped ahci_pci_reset_controller() which internally
calls ahci_reset_controller() and applies the PCS quirk if needed after
that. It was called each time a reset was required instead of just
ahci_reset_controller(). This patch puts the function back in place.
Fixes:
c312ef176399 ("libata/ahci: Drop PCS quirk for Denverton and beyond")
Signed-off-by: Adam Vodopjan <grozzly@protonmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yu Kuai [Mon, 26 Dec 2022 03:06:05 +0000 (11:06 +0800)]
block, bfq: fix uaf for bfqq in bfq_exit_icq_bfqq
[ Upstream commit
246cf66e300b76099b5dbd3fdd39e9a5dbc53f02 ]
Commit
64dc8c732f5c ("block, bfq: fix possible uaf for 'bfqq->bic'")
will access 'bic->bfqq' in bic_set_bfqq(), however, bfq_exit_icq_bfqq()
can free bfqq first, and then call bic_set_bfqq(), which will cause uaf.
Fix the problem by moving bfq_exit_bfqq() behind bic_set_bfqq().
Fixes:
64dc8c732f5c ("block, bfq: fix possible uaf for 'bfqq->bic'")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20221226030605.1437081-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Adrian Freund [Tue, 13 Dec 2022 20:13:11 +0000 (21:13 +0100)]
ACPI: resource: do IRQ override on Lenovo 14ALC7
[ Upstream commit
f3cb9b740869712d448edf3b9ef5952b847caf8b ]
Commit
bfcdf58380b1 ("ACPI: resource: do IRQ override on LENOVO IdeaPad")
added an override for Lenovo IdeaPad 5 16ALC7. The 14ALC7 variant also
suffers from a broken touchscreen and trackpad.
Fixes:
9946e39fe8d0 ("ACPI: resource: skip IRQ override on AMD Zen platforms")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216804
Signed-off-by: Adrian Freund <adrian@freund.io>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Erik Schumacher [Sun, 11 Dec 2022 13:33:22 +0000 (14:33 +0100)]
ACPI: resource: do IRQ override on XMG Core 15
[ Upstream commit
7592b79ba4a91350b38469e05238308bcfe1019b ]
The Schenker XMG CORE 15 (M22) is Ryzen-6 based and needs IRQ overriding
for the keyboard to work. Adding an entry for this laptop to the
override_table makes the internal keyboard functional again.
Signed-off-by: Erik Schumacher <ofenfisch@googlemail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of:
f3cb9b740869 ("ACPI: resource: do IRQ override on Lenovo 14ALC7")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiri Slaby (SUSE) [Tue, 4 Oct 2022 10:33:40 +0000 (12:33 +0200)]
ACPI: resource: do IRQ override on LENOVO IdeaPad
[ Upstream commit
bfcdf58380b1d9be564a78a9370da722ed1a9965 ]
LENOVO IdeaPad Flex 5 is ryzen-5 based and the commit below removed IRQ
overriding for those. This broke touchscreen and trackpad:
i2c_designware AMDI0010:00: controller timed out
i2c_designware AMDI0010:03: controller timed out
i2c_hid_acpi i2c-MSFT0001:00: failed to reset device: -61
i2c_designware AMDI0010:03: controller timed out
...
i2c_hid_acpi i2c-MSFT0001:00: can't add hid device: -61
i2c_hid_acpi: probe of i2c-MSFT0001:00 failed with error -61
White-list this specific model in the override_table.
For this to work, the ZEN test needs to be put below the table walk.
Fixes:
37c81d9f1d1b (ACPI: resource: skip IRQ override on AMD Zen platforms)
Link: https://bugzilla.suse.com/show_bug.cgi?id=1203794
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of:
f3cb9b740869 ("ACPI: resource: do IRQ override on Lenovo 14ALC7")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tamim Khan [Mon, 29 Aug 2022 03:04:19 +0000 (23:04 -0400)]
ACPI: resource: Skip IRQ override on Asus Vivobook K3402ZA/K3502ZA
[ Upstream commit
e12dee3736731e24b1e7367f87d66ac0fcd73ce7 ]
In the ACPI DSDT table for Asus VivoBook K3402ZA/K3502ZA
IRQ 1 is described as ActiveLow; however, the kernel overrides
it to Edge_High. This prevents the internal keyboard from working
on these laptops. In order to fix this add these laptops to the
skip_override_table so that the kernel does not override IRQ 1 to
Edge_High.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216158
Reviewed-by: Hui Wang <hui.wang@canonical.com>
Tested-by: Tamim Khan <tamim@fusetak.com>
Tested-by: Sunand <sunandchakradhar@gmail.com>
Signed-off-by: Tamim Khan <tamim@fusetak.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of:
f3cb9b740869 ("ACPI: resource: do IRQ override on Lenovo 14ALC7")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Keith Busch [Mon, 19 Dec 2022 21:54:55 +0000 (13:54 -0800)]
nvme-pci: fix page size checks
[ Upstream commit
841734234a28fd5cd0889b84bd4d93a0988fa11e ]
The size allocated out of the dma pool is at most NVME_CTRL_PAGE_SIZE,
which may be smaller than the PAGE_SIZE.
Fixes:
c61b82c7b7134 ("nvme-pci: fix PRP pool size")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Keith Busch [Mon, 19 Dec 2022 18:59:06 +0000 (10:59 -0800)]
nvme-pci: fix mempool alloc size
[ Upstream commit
c89a529e823d51dd23c7ec0c047c7a454a428541 ]
Convert the max size to bytes to match the units of the divisor that
calculates the worst-case number of PRP entries.
The result is used to determine how many PRP Lists are required. The
code was previously rounding this to 1 list, but we can require 2 in the
worst case. In that scenario, the driver would corrupt memory beyond the
size provided by the mempool.
While unlikely to occur (you'd need a 4MB in exactly 127 phys segments
on a queue that doesn't support SGLs), this memory corruption has been
observed by kfence.
Cc: Jens Axboe <axboe@kernel.dk>
Fixes:
943e942e6266f ("nvme-pci: limit max IO size and segments to avoid high order allocations")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Klaus Jensen [Tue, 13 Dec 2022 08:58:07 +0000 (09:58 +0100)]
nvme-pci: fix doorbell buffer value endianness
[ Upstream commit
b5f96cb719d8ba220b565ddd3ba4ac0d8bcfb130 ]
When using shadow doorbells, the event index and the doorbell values are
written to host memory. Prior to this patch, the values written would
erroneously be written in host endianness. This causes trouble on
big-endian platforms. Fix this by adding missing endian conversions.
This issue was noticed by Guenter while testing various big-endian
platforms under QEMU[1]. A similar fix required for hw/nvme in QEMU is
up for review as well[2].
[1]: https://lore.kernel.org/qemu-devel/
20221209110022.GA3396194@roeck-us.net/
[2]: https://lore.kernel.org/qemu-devel/
20221212114409.34972-4-its@irrelevant.dk/
Fixes:
f9f38e33389c ("nvme: improve performance for virtual NVMe devices")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sasha Levin [Sat, 31 Dec 2022 15:14:21 +0000 (10:14 -0500)]
Revert "selftests/bpf: Add test for unstable CT lookup API"
This reverts commit
f463a1295c4fa73eac0b16fbfbdfc5726b06445d.
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paulo Alcantara [Sun, 11 Dec 2022 21:18:55 +0000 (18:18 -0300)]
cifs: fix oops during encryption
[ Upstream commit
f7f291e14dde32a07b1f0aa06921d28f875a7b54 ]
When running xfstests against Azure the following oops occurred on an
arm64 system
Unable to handle kernel write to read-only memory at virtual address
ffff0001221cf000
Mem abort info:
ESR = 0x9600004f
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x0f: level 3 permission fault
Data abort info:
ISV = 0, ISS = 0x0000004f
CM = 0, WnR = 1
swapper pgtable: 4k pages, 48-bit VAs, pgdp=
00000000294f3000
[
ffff0001221cf000] pgd=
18000001ffff8003, p4d=
18000001ffff8003,
pud=
18000001ff82e003, pmd=
18000001ff71d003, pte=
00600001221cf787
Internal error: Oops:
9600004f [#1] PREEMPT SMP
...
pstate:
80000005 (Nzcv daif -PAN -UAO -TCO BTYPE=--)
pc : __memcpy+0x40/0x230
lr : scatterwalk_copychunks+0xe0/0x200
sp :
ffff800014e92de0
x29:
ffff800014e92de0 x28:
ffff000114f9de80 x27:
0000000000000008
x26:
0000000000000008 x25:
ffff800014e92e78 x24:
0000000000000008
x23:
0000000000000001 x22:
0000040000000000 x21:
ffff000000000000
x20:
0000000000000001 x19:
ffff0001037c4488 x18:
0000000000000014
x17:
235e1c0d6efa9661 x16:
a435f9576b6edd6c x15:
0000000000000058
x14:
0000000000000001 x13:
0000000000000008 x12:
ffff000114f2e590
x11:
ffffffffffffffff x10:
0000040000000000 x9 :
ffff8000105c3580
x8 :
2e9413b10000001a x7 :
534b4410fb86b005 x6 :
534b4410fb86b005
x5 :
ffff0001221cf008 x4 :
ffff0001037c4490 x3 :
0000000000000001
x2 :
0000000000000008 x1 :
ffff0001037c4488 x0 :
ffff0001221cf000
Call trace:
__memcpy+0x40/0x230
scatterwalk_map_and_copy+0x98/0x100
crypto_ccm_encrypt+0x150/0x180
crypto_aead_encrypt+0x2c/0x40
crypt_message+0x750/0x880
smb3_init_transform_rq+0x298/0x340
smb_send_rqst.part.11+0xd8/0x180
smb_send_rqst+0x3c/0x100
compound_send_recv+0x534/0xbc0
smb2_query_info_compound+0x32c/0x440
smb2_set_ea+0x438/0x4c0
cifs_xattr_set+0x5d4/0x7c0
This is because in scatterwalk_copychunks(), we attempted to write to
a buffer (@sign) that was allocated in the stack (vmalloc area) by
crypt_message() and thus accessing its remaining 8 (x2) bytes ended up
crossing a page boundary.
To simply fix it, we could just pass @sign kmalloc'd from
crypt_message() and then we're done. Luckily, we don't seem to pass
any other vmalloc'd buffers in smb_rqst::rq_iov...
Instead, let's map the correct pages and offsets from vmalloc buffers
as well in cifs_sg_set_buf() and then avoiding such oopses.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaoqian Lin [Tue, 6 Dec 2022 08:17:31 +0000 (12:17 +0400)]
usb: dwc3: qcom: Fix memory leak in dwc3_qcom_interconnect_init
[ Upstream commit
97a48da1619ba6bd42a0e5da0a03aa490a9496b1 ]
of_icc_get() alloc resources for path handle, we should release it when not
need anymore. Like the release in dwc3_qcom_interconnect_exit() function.
Add icc_put() in error handling to fix this.
Fixes:
bea46b981515 ("usb: dwc3: qcom: Add interconnect support in dwc3 driver")
Cc: stable <stable@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20221206081731.818107-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Greg Kroah-Hartman [Sat, 31 Dec 2022 12:14:48 +0000 (13:14 +0100)]
Linux 5.15.86
Link: https://lore.kernel.org/r/20221228144256.536395940@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Slade Watkins <srw@sladewatkins.net>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Thierry Reding <treding@nvidia.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Link: https://lore.kernel.org/r/20221230094021.575121238@linuxfoundation.org
Tested-by: Slade Watkins <srw@sladewatkins.net>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Ron Economos <re@w6rz.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Price [Thu, 10 Nov 2022 11:45:48 +0000 (11:45 +0000)]
pwm: tegra: Fix 32 bit build
[ Upstream commit
dd1f1da4ada5d8ac774c2ebe97230637820b3323 ]
The value of NSEC_PER_SEC << PWM_DUTY_WIDTH doesn't fix within a 32 bit
integer causing a build warning/error (and the value truncated):
drivers/pwm/pwm-tegra.c: In function ‘tegra_pwm_config’:
drivers/pwm/pwm-tegra.c:148:53: error: result of ‘
1000000000 << 8’ requires 39 bits to represent, but ‘long int’ only has 32 bits [-Werror=shift-overflow=]
148 | required_clk_rate = DIV_ROUND_UP_ULL(NSEC_PER_SEC << PWM_DUTY_WIDTH,
| ^~
Explicitly cast to a u64 to ensure the correct result.
Fixes:
cfcb68817fb3 ("pwm: tegra: Improve required rate calculation")
Signed-off-by: Steven Price <steven.price@arm.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Sun, 20 Nov 2022 13:01:43 +0000 (14:01 +0100)]
mfd: qcom_rpm: Use devm_of_platform_populate() to simplify code
[ Upstream commit
e48dee96046246980d476714b3f6684d45f29c13 ]
Use devm_of_platform_populate() instead of hand-writing it.
This simplifies the code.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/fd997dc92b9cee219e9c55e22959a94f4bbf570b.1668949256.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yassine Oudjana [Mon, 7 Nov 2022 15:33:17 +0000 (18:33 +0300)]
extcon: usbc-tusb320: Call the Type-C IRQ handler only if a port is registered
commit
341fd15e2e18c24d5c738496cfc3d7a272241201 upstream.
Commit
bf7571c00dca ("extcon: usbc-tusb320: Add USB TYPE-C support")
added an optional Type-C interface to the driver but missed to check
if it is in use when calling the IRQ handler. This causes an oops on
devices currently using the old extcon interface. Check if a Type-C
port is registered before calling the Type-C IRQ handler.
Fixes:
bf7571c00dca ("extcon: usbc-tusb320: Add USB TYPE-C support")
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20221107153317.657803-1-y.oudjana@protonmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lin Ma [Mon, 28 Nov 2022 16:21:59 +0000 (16:21 +0000)]
media: dvbdev: fix refcnt bug
commit
3a664569b71b0a52be5ffb9fb87cc4f83d29bd71 upstream.
Previous commit initialize the dvbdev->ref before the template copy,
which will overwrite the reference and cause refcnt bug.
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 0 PID: 1 at lib/refcount.c:25 refcount_warn_saturate+0x17c/0x1f0 lib/refcount.c:25
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.1.0-rc6-next-
20221128-syzkaller #0
...
RIP: 0010:refcount_warn_saturate+0x17c/0x1f0 lib/refcount.c:25
RSP: 0000:
ffffc900000678d0 EFLAGS:
00010282
RAX:
0000000000000000 RBX:
0000000000000000 RCX:
0000000000000000
RDX:
ffff88813ff58000 RSI:
ffffffff81660e7c RDI:
fffff5200000cf0c
RBP:
ffff888022a45010 R08:
0000000000000005 R09:
0000000000000000
R10:
0000000080000000 R11:
0000000000000000 R12:
0000000000000001
R13:
0000000000000000 R14:
0000000000000000 R15:
0000000000000001
FS:
0000000000000000(0000) GS:
ffff8880b9800000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
ffff88823ffff000 CR3:
000000000c48e000 CR4:
00000000003506f0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
<TASK>
__refcount_add include/linux/refcount.h:199 [inline]
__refcount_inc include/linux/refcount.h:250 [inline]
refcount_inc include/linux/refcount.h:267 [inline]
kref_get include/linux/kref.h:45 [inline]
dvb_device_get drivers/media/dvb-core/dvbdev.c:585 [inline]
dvb_register_device+0xe83/0x16e0 drivers/media/dvb-core/dvbdev.c:517
...
Just place the kref_init at correct position.
Reported-by: syzbot+fce48a3dd3368645bd6c@syzkaller.appspotmail.com
Fixes:
0fc044b2b5e2 ("media: dvbdev: adopts refcnt to avoid UAF")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lin Ma [Mon, 28 Nov 2022 08:39:03 +0000 (08:39 +0000)]
media: dvbdev: fix build warning due to comments
commit
3edfd14bb50fa6f94ed1a37bbb17d9f1c2793b57 upstream.
Previous commit that introduces reference counter does not add proper
comments, which will lead to warning when building htmldocs. Fix them.
Reported-by: "Stephen Rothwell" <sfr@canb.auug.org.au>
Fixes:
0fc044b2b5e2 ("media: dvbdev: adopts refcnt to avoid UAF")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gaosheng Cui [Wed, 14 Dec 2022 08:01:17 +0000 (16:01 +0800)]
net: stmmac: fix errno when create_singlethread_workqueue() fails
commit
2cb815cfc78b137ee38bcd65e7c955d6cc2cc250 upstream.
We should set the return value to -ENOMEM explicitly when
create_singlethread_workqueue() fails in stmmac_dvr_probe(),
otherwise we'll lose the error value.
Fixes:
a137f3f27f92 ("net: stmmac: fix possible memory leak in stmmac_dvr_probe()")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20221214080117.3514615-1-cuigaosheng1@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arun Easi [Tue, 29 Nov 2022 09:26:34 +0000 (01:26 -0800)]
scsi: qla2xxx: Fix crash when I/O abort times out
commit
68ad83188d782b2ecef2e41ac245d27e0710fe8e upstream.
While performing CPU hotplug, a crash with the following stack was seen:
Call Trace:
qla24xx_process_response_queue+0x42a/0x970 [qla2xxx]
qla2x00_start_nvme_mq+0x3a2/0x4b0 [qla2xxx]
qla_nvme_post_cmd+0x166/0x240 [qla2xxx]
nvme_fc_start_fcp_op.part.0+0x119/0x2e0 [nvme_fc]
blk_mq_dispatch_rq_list+0x17b/0x610
__blk_mq_sched_dispatch_requests+0xb0/0x140
blk_mq_sched_dispatch_requests+0x30/0x60
__blk_mq_run_hw_queue+0x35/0x90
__blk_mq_delay_run_hw_queue+0x161/0x180
blk_execute_rq+0xbe/0x160
__nvme_submit_sync_cmd+0x16f/0x220 [nvme_core]
nvmf_connect_admin_queue+0x11a/0x170 [nvme_fabrics]
nvme_fc_create_association.cold+0x50/0x3dc [nvme_fc]
nvme_fc_connect_ctrl_work+0x19/0x30 [nvme_fc]
process_one_work+0x1e8/0x3c0
On abort timeout, completion was called without checking if the I/O was
already completed.
Verify that I/O and abort request are indeed outstanding before attempting
completion.
Fixes:
71c80b75ce8f ("scsi: qla2xxx: Do command completion on abort timeout")
Reported-by: Marco Patalano <mpatalan@redhat.com>
Tested-by: Marco Patalano <mpatalan@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20221129092634.15347-1-njavali@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Filipe Manana [Mon, 28 Nov 2022 15:07:30 +0000 (15:07 +0000)]
btrfs: do not BUG_ON() on ENOMEM when dropping extent items for a range
commit
162d053e15fe985f754ef495a96eb3db970c43ed upstream.
If we get -ENOMEM while dropping file extent items in a given range, at
btrfs_drop_extents(), due to failure to allocate memory when attempting to
increment the reference count for an extent or drop the reference count,
we handle it with a BUG_ON(). This is excessive, instead we can simply
abort the transaction and return the error to the caller. In fact most
callers of btrfs_drop_extents(), directly or indirectly, already abort
the transaction if btrfs_drop_extents() returns any error.
Also, we already have error paths at btrfs_drop_extents() that may return
-ENOMEM and in those cases we abort the transaction, like for example
anything that changes the b+tree may return -ENOMEM due to a failure to
allocate a new extent buffer when COWing an existing extent buffer, such
as a call to btrfs_duplicate_item() for example.
So replace the BUG_ON() calls with proper logic to abort the transaction
and return the error.
Reported-by: syzbot+0b1fb6b0108c27419f9f@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/00000000000089773e05ee4b9cb4@google.com/
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chen Zhongjin [Mon, 28 Nov 2022 10:33:05 +0000 (11:33 +0100)]
ovl: fix use inode directly in rcu-walk mode
commit
672e4268b2863d7e4978dfed29552b31c2f9bd4e upstream.
ovl_dentry_revalidate_common() can be called in rcu-walk mode. As document
said, "in rcu-walk mode, d_parent and d_inode should not be used without
care".
Check inode here to protect access under rcu-walk mode.
Fixes:
bccece1ead36 ("ovl: allow remote upper")
Reported-and-tested-by: syzbot+a4055c78774bbf3498bb@syzkaller.appspotmail.com
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Cc: <stable@vger.kernel.org> # v5.7
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tetsuo Handa [Mon, 5 Dec 2022 22:10:31 +0000 (07:10 +0900)]
fbdev: fbcon: release buffer when fbcon_do_set_font() failed
commit
3c3bfb8586f848317ceba5d777e11204ba3e5758 upstream.
syzbot is reporting memory leak at fbcon_do_set_font() [1], for
commit
a5a923038d70 ("fbdev: fbcon: Properly revert changes when
vc_resize() failed") missed that the buffer might be newly allocated
by fbcon_set_font().
Link: https://syzkaller.appspot.com/bug?extid=25bdb7b1703639abd498
Reported-by: syzbot <syzbot+25bdb7b1703639abd498@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+25bdb7b1703639abd498@syzkaller.appspotmail.com>
Fixes:
a5a923038d70 ("fbdev: fbcon: Properly revert changes when vc_resize() failed")
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rickard x Andersson [Tue, 20 Dec 2022 10:23:18 +0000 (11:23 +0100)]
gcov: add support for checksum field
commit
e96b95c2b7a63a454b6498e2df67aac14d046d13 upstream.
In GCC version 12.1 a checksum field was added.
This patch fixes a kernel crash occurring during boot when using
gcov-kernel with GCC version 12.2. The crash occurred on a system running
on i.MX6SX.
Link: https://lkml.kernel.org/r/20221220102318.3418501-1-rickaran@axis.com
Fixes:
977ef30a7d88 ("gcov: support GCC 12.1 and newer compilers")
Signed-off-by: Rickard x Andersson <rickaran@axis.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Tested-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Martin Liska <mliska@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yuan Can [Mon, 31 Oct 2022 12:04:43 +0000 (12:04 +0000)]
floppy: Fix memory leak in do_floppy_init()
commit
f8ace2e304c5dd8a7328db9cd2b8a4b1b98d83ec upstream.
A memory leak was reported when floppy_alloc_disk() failed in
do_floppy_init().
unreferenced object 0xffff888115ed25a0 (size 8):
comm "modprobe", pid 727, jiffies
4295051278 (age 25.529s)
hex dump (first 8 bytes):
00 ac 67 5b 81 88 ff ff ..g[....
backtrace:
[<
000000007f457abb>] __kmalloc_node+0x4c/0xc0
[<
00000000a87bfa9e>] blk_mq_realloc_tag_set_tags.part.0+0x6f/0x180
[<
000000006f02e8b1>] blk_mq_alloc_tag_set+0x573/0x1130
[<
0000000066007fd7>] 0xffffffffc06b8b08
[<
0000000081f5ac40>] do_one_initcall+0xd0/0x4f0
[<
00000000e26d04ee>] do_init_module+0x1a4/0x680
[<
000000001bb22407>] load_module+0x6249/0x7110
[<
00000000ad31ac4d>] __do_sys_finit_module+0x140/0x200
[<
000000007bddca46>] do_syscall_64+0x35/0x80
[<
00000000b5afec39>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
unreferenced object 0xffff88810fc30540 (size 32):
comm "modprobe", pid 727, jiffies
4295051278 (age 25.529s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<
000000007f457abb>] __kmalloc_node+0x4c/0xc0
[<
000000006b91eab4>] blk_mq_alloc_tag_set+0x393/0x1130
[<
0000000066007fd7>] 0xffffffffc06b8b08
[<
0000000081f5ac40>] do_one_initcall+0xd0/0x4f0
[<
00000000e26d04ee>] do_init_module+0x1a4/0x680
[<
000000001bb22407>] load_module+0x6249/0x7110
[<
00000000ad31ac4d>] __do_sys_finit_module+0x140/0x200
[<
000000007bddca46>] do_syscall_64+0x35/0x80
[<
00000000b5afec39>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
If the floppy_alloc_disk() failed, disks of current drive will not be set,
thus the lastest allocated set->tag cannot be freed in the error handling
path. A simple call graph shown as below:
floppy_module_init()
floppy_init()
do_floppy_init()
for (drive = 0; drive < N_DRIVE; drive++)
blk_mq_alloc_tag_set()
blk_mq_alloc_tag_set_tags()
blk_mq_realloc_tag_set_tags() # set->tag allocated
floppy_alloc_disk()
blk_mq_alloc_disk() # error occurred, disks failed to allocated
->out_put_disk:
for (drive = 0; drive < N_DRIVE; drive++)
if (!disks[drive][0]) # the last disks is not set and loop break
break;
blk_mq_free_tag_set() # the latest allocated set->tag leaked
Fix this problem by free the set->tag of current drive before jump to
error handling path.
Cc: stable@vger.kernel.org
Fixes:
302cfee15029 ("floppy: use a separate gendisk for each media format")
Signed-off-by: Yuan Can <yuancan@huawei.com>
[efremov: added stable list, changed title]
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Thu, 15 Dec 2022 10:46:46 +0000 (11:46 +0100)]
regulator: core: fix deadlock on regulator enable
commit
cb3543cff90a4448ed560ac86c98033ad5fecda9 upstream.
When updating the operating mode as part of regulator enable, the caller
has already locked the regulator tree and drms_uA_update() must not try
to do the same in order not to trigger a deadlock.
The lock inversion is reported by lockdep as:
======================================================
WARNING: possible circular locking dependency detected
6.1.0-next-
20221215 #142 Not tainted
------------------------------------------------------
udevd/154 is trying to acquire lock:
ffffc11f123d7e50 (regulator_list_mutex){+.+.}-{3:3}, at: regulator_lock_dependent+0x54/0x280
but task is already holding lock:
ffff80000e4c36e8 (regulator_ww_class_acquire){+.+.}-{0:0}, at: regulator_enable+0x34/0x80
which lock already depends on the new lock.
...
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(regulator_ww_class_acquire);
lock(regulator_list_mutex);
lock(regulator_ww_class_acquire);
lock(regulator_list_mutex);
*** DEADLOCK ***
just before probe of a Qualcomm UFS controller (occasionally) deadlocks
when enabling one of its regulators.
Fixes:
9243a195be7a ("regulator: core: Change voltage setting path")
Fixes:
f8702f9e4aa7 ("regulator: core: Use ww_mutex for regulators locking")
Cc: stable@vger.kernel.org # 5.0
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221215104646.19818-1-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rasmus Villemoes [Tue, 15 Nov 2022 13:23:23 +0000 (14:23 +0100)]
iio: adc128s052: add proper .data members in adc128_of_match table
commit
e2af60f5900c6ade53477b494ffb54690eee11f5 upstream.
Prior to commit
bd5d54e4d49d ("iio: adc128s052: add ACPI _HID
AANT1280"), the driver unconditionally used spi_get_device_id() to get
the index into the adc128_config array.
However, with that commit, OF-based boards now incorrectly treat all
supported sensors as if they are an adc128s052, because all the .data
members of the adc128_of_match table are implicitly 0. Our board,
which has an adc122s021, thus exposes 8 channels whereas it really
only has two.
Fixes:
bd5d54e4d49d ("iio: adc128s052: add ACPI _HID AANT1280")
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221115132324.1078169-1-linux@rasmusvillemoes.dk
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nuno Sá [Tue, 20 Sep 2022 11:28:07 +0000 (13:28 +0200)]
iio: adc: ad_sigma_delta: do not use internal iio_dev lock
commit
20228a1d5a55e7db0c6720840f2c7d2b48c55f69 upstream.
Drop 'mlock' usage by making use of iio_device_claim_direct_mode().
This change actually makes sure we cannot do a single conversion while
buffering is enable. Note there was a potential race in the previous
code since we were only acquiring the lock after checking if the bus is
enabled.
Fixes:
af3008485ea0 ("iio:adc: Add common code for ADI Sigma Delta devices")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: <Stable@vger.kernel.org> #No rush as race is very old.
Link: https://lore.kernel.org/r/20220920112821.975359-2-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zeng Heng [Tue, 15 Nov 2022 02:37:12 +0000 (10:37 +0800)]
iio: fix memory leak in iio_device_register_eventset()
commit
86fdd15e10e404e70ecb2a3bff24d70356d42b36 upstream.
When iio_device_register_sysfs_group() returns failed,
iio_device_register_eventset() needs to free attrs array.
Otherwise, kmemleak would scan & report memory leak as below:
unreferenced object 0xffff88810a1cc3c0 (size 32):
comm "100-i2c-vcnl302", pid 728, jiffies
4295052307 (age 156.027s)
backtrace:
__kmalloc+0x46/0x1b0
iio_device_register_eventset at drivers/iio/industrialio-event.c:541
__iio_device_register at drivers/iio/industrialio-core.c:1959
__devm_iio_device_register at drivers/iio/industrialio-core.c:2040
Fixes:
32f171724e5c ("iio: core: rework iio device group creation")
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Link: https://lore.kernel.org/r/20221115023712.3726854-1-zengheng4@huawei.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Roberto Sassu [Thu, 10 Nov 2022 09:46:35 +0000 (10:46 +0100)]
reiserfs: Add missing calls to reiserfs_security_free()
commit
572302af1258459e124437b8f3369357447afac7 upstream.
Commit
57fe60df6241 ("reiserfs: add atomic addition of selinux attributes
during inode creation") defined reiserfs_security_free() to free the name
and value of a security xattr allocated by the active LSM through
security_old_inode_init_security(). However, this function is not called
in the reiserfs code.
Thus, add a call to reiserfs_security_free() whenever
reiserfs_security_init() is called, and initialize value to NULL, to avoid
to call kfree() on an uninitialized pointer.
Finally, remove the kfree() for the xattr name, as it is not allocated
anymore.
Fixes:
57fe60df6241 ("reiserfs: add atomic addition of selinux attributes during inode creation")
Cc: stable@vger.kernel.org
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: Mimi Zohar <zohar@linux.ibm.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nathan Chancellor [Wed, 14 Dec 2022 23:26:03 +0000 (16:26 -0700)]
security: Restrict CONFIG_ZERO_CALL_USED_REGS to gcc or clang > 15.0.6
commit
d6a9fb87e9d18f3394a9845546bbe868efdccfd2 upstream.
A bad bug in clang's implementation of -fzero-call-used-regs can result
in NULL pointer dereferences (see the links above the check for more
information). Restrict CONFIG_CC_HAS_ZERO_CALL_USED_REGS to either a
supported GCC version or a clang newer than 15.0.6, which will catch
both a theoretical 15.0.7 and the upcoming 16.0.0, which will both have
the bug fixed.
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221214232602.4118147-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Schspa Shi [Thu, 1 Dec 2022 03:33:10 +0000 (11:33 +0800)]
9p: set req refcount to zero to avoid uninitialized usage
commit
26273ade77f54716e30dfd40ac6e85ceb54ac0f9 upstream.
When a new request is allocated, the refcount will be zero if it is
reused, but if the request is newly allocated from slab, it is not fully
initialized before being added to idr.
If the p9_read_work got a response before the refcount initiated. It will
use a uninitialized req, which will result in a bad request data struct.
Here is the logs from syzbot.
Corrupted memory at 0xffff88807eade00b [ 0xff 0x07 0x00 0x00 0x00 0x00
0x00 0x00 . . . . . . . . ] (in kfence-#110):
p9_fcall_fini net/9p/client.c:248 [inline]
p9_req_put net/9p/client.c:396 [inline]
p9_req_put+0x208/0x250 net/9p/client.c:390
p9_client_walk+0x247/0x540 net/9p/client.c:1165
clone_fid fs/9p/fid.h:21 [inline]
v9fs_fid_xattr_set+0xe4/0x2b0 fs/9p/xattr.c:118
v9fs_xattr_set fs/9p/xattr.c:100 [inline]
v9fs_xattr_handler_set+0x6f/0x120 fs/9p/xattr.c:159
__vfs_setxattr+0x119/0x180 fs/xattr.c:182
__vfs_setxattr_noperm+0x129/0x5f0 fs/xattr.c:216
__vfs_setxattr_locked+0x1d3/0x260 fs/xattr.c:277
vfs_setxattr+0x143/0x340 fs/xattr.c:309
setxattr+0x146/0x160 fs/xattr.c:617
path_setxattr+0x197/0x1c0 fs/xattr.c:636
__do_sys_setxattr fs/xattr.c:652 [inline]
__se_sys_setxattr fs/xattr.c:648 [inline]
__ia32_sys_setxattr+0xc0/0x160 fs/xattr.c:648
do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline]
__do_fast_syscall_32+0x65/0xf0 arch/x86/entry/common.c:178
do_fast_syscall_32+0x33/0x70 arch/x86/entry/common.c:203
entry_SYSENTER_compat_after_hwframe+0x70/0x82
Below is a similar scenario, the scenario in the syzbot log looks more
complicated than this one, but this patch can fix it.
T21124 p9_read_work
======================== second trans =================================
p9_client_walk
p9_client_rpc
p9_client_prepare_req
p9_tag_alloc
req = kmem_cache_alloc(p9_req_cache, GFP_NOFS);
tag = idr_alloc
<< preempted >>
req->tc.tag = tag;
/* req->[refcount/tag] == uninitialized */
m->rreq = p9_tag_lookup(m->client, m->rc.tag);
/* increments uninitalized refcount */
refcount_set(&req->refcount, 2);
/* cb drops one ref */
p9_client_cb(req)
/* reader thread drops its ref:
request is incorrectly freed */
p9_req_put(req)
/* use after free and ref underflow */
p9_req_put(req)
To fix it, we can initialize the refcount to zero before add to idr.
Link: https://lkml.kernel.org/r/20221201033310.18589-1-schspa@gmail.com
Cc: stable@vger.kernel.org # 6.0+ due to 6cda12864cb0 ("9p: Drop kref usage")
Fixes:
728356dedeff ("9p: Add refcount to p9_req_t")
Reported-by: syzbot+8f1060e2aaf8ca55220b@syzkaller.appspotmail.com
Signed-off-by: Schspa Shi <schspa@gmail.com>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Isaac J. Manjarres [Thu, 8 Dec 2022 21:29:01 +0000 (13:29 -0800)]
loop: Fix the max_loop commandline argument treatment when it is set to 0
commit
85c50197716c60fe57f411339c579462e563ac57 upstream.
Currently, the max_loop commandline argument can be used to specify how
many loop block devices are created at init time. If it is not
specified on the commandline, CONFIG_BLK_DEV_LOOP_MIN_COUNT loop block
devices will be created.
The max_loop commandline argument can be used to override the value of
CONFIG_BLK_DEV_LOOP_MIN_COUNT. However, when max_loop is set to 0
through the commandline, the current logic treats it as if it had not
been set, and creates CONFIG_BLK_DEV_LOOP_MIN_COUNT devices anyway.
Fix this by starting max_loop off as set to CONFIG_BLK_DEV_LOOP_MIN_COUNT.
This preserves the intended behavior of creating
CONFIG_BLK_DEV_LOOP_MIN_COUNT loop block devices if the max_loop
commandline parameter is not specified, and allowing max_loop to
be respected for all values, including 0.
This allows environments that can create all of their required loop
block devices on demand to not have to unnecessarily preallocate loop
block devices.
Fixes:
732850827450 ("remove artificial software max_loop limit")
Cc: stable@vger.kernel.org
Cc: Ken Chen <kenchen@google.com>
Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Link: https://lore.kernel.org/r/20221208212902.765781-1-isaacmanjarres@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enrik Berkhan [Thu, 3 Nov 2022 22:27:12 +0000 (23:27 +0100)]
HID: mcp2221: don't connect hidraw
commit
67c90d14018775556d5420382ace86521421f9ff upstream.
The MCP2221 driver should not connect to the hidraw userspace interface,
as it needs exclusive access to the chip.
If you want to use /dev/hidrawX with the MCP2221, you need to avoid
binding this driver to the device and use the hid generic driver instead
(e.g. using udev rules).
Cc: stable@vger.kernel.org
Reported-by: Sven Zühlsdorf <sven.zuehlsdorf@vigem.de>
Signed-off-by: Enrik Berkhan <Enrik.Berkhan@inka.de>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20221103222714.21566-2-Enrik.Berkhan@inka.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason Gerecke [Thu, 1 Dec 2022 23:11:41 +0000 (15:11 -0800)]
HID: wacom: Ensure bootloader PID is usable in hidraw mode
commit
1db1f392591aff13fd643f0ec7c1d5e27391d700 upstream.
Some Wacom devices have a special "bootloader" mode that is used for
firmware flashing. When operating in this mode, the device cannot be
used for input, and the HID descriptor is not able to be processed by
the driver. The driver generates an "Unknown device_type" warning and
then returns an error code from wacom_probe(). This is a problem because
userspace still needs to be able to interact with the device via hidraw
to perform the firmware flash.
This commit adds a non-generic device definition for 056a:0094 which
is used when devices are in "bootloader" mode. It marks the devices
with a special BOOTLOADER type that is recognized by wacom_probe() and
wacom_raw_event(). When we see this type we ensure a hidraw device is
created and otherwise keep our hands off so that userspace is in full
control.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Tatsunosuke Tobita <tatsunosuke.tobita@wacom.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mathias Nyman [Wed, 30 Nov 2022 09:19:43 +0000 (11:19 +0200)]
xhci: Prevent infinite loop in transaction errors recovery for streams
commit
a1575120972ecd7baa6af6a69e4e7ea9213bde7c upstream.
Make sure to also limit the amount of soft reset retries for transaction
errors on streams in cases where the transaction error event doesn't point
to any specific TRB.
In these cases we don't know the TRB or stream ring, but we do know which
endpoint had the error.
To keep error counting simple and functional, move the current err_count
from ring structure to endpoint structure.
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20221130091944.2171610-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ferry Toth [Mon, 5 Dec 2022 20:15:27 +0000 (21:15 +0100)]
usb: dwc3: core: defer probe on ulpi_read_id timeout
commit
63130462c919ece0ad0d9bb5a1f795ef8d79687e upstream.
Since commit
0f0101719138 ("usb: dwc3: Don't switch OTG -> peripheral
if extcon is present"), Dual Role support on Intel Merrifield platform
broke due to rearranging the call to dwc3_get_extcon().
It appears to be caused by ulpi_read_id() masking the timeout on the first
test write. In the past dwc3 probe continued by calling dwc3_core_soft_reset()
followed by dwc3_get_extcon() which happend to return -EPROBE_DEFER.
On deferred probe ulpi_read_id() finally succeeded. Due to above mentioned
rearranging -EPROBE_DEFER is not returned and probe completes without phy.
On Intel Merrifield the timeout on the first test write issue is reproducible
but it is difficult to find the root cause. Using a mainline kernel and
rootfs with buildroot ulpi_read_id() succeeds. As soon as adding
ftrace / bootconfig to find out why, ulpi_read_id() fails and we can't
analyze the flow. Using another rootfs ulpi_read_id() fails even without
adding ftrace. We suspect the issue is some kind of timing / race, but
merely retrying ulpi_read_id() does not resolve the issue.
As we now changed ulpi_read_id() to return -ETIMEDOUT in this case, we
need to handle the error by calling dwc3_core_soft_reset() and request
-EPROBE_DEFER. On deferred probe ulpi_read_id() is retried and succeeds.
Fixes:
ef6a7bcfb01c ("usb: ulpi: Support device discovery via DT")
Cc: stable@vger.kernel.org
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Ferry Toth <ftoth@exalondelft.nl>
Link: https://lore.kernel.org/r/20221205201527.13525-3-ftoth@exalondelft.nl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sven Peter [Mon, 28 Nov 2022 16:15:26 +0000 (17:15 +0100)]
usb: dwc3: Fix race between dwc3_set_mode and __dwc3_set_mode
commit
62c73bfea048e66168df09da6d3e4510ecda40bb upstream.
dwc->desired_dr_role is changed by dwc3_set_mode inside a spinlock but
then read by __dwc3_set_mode outside of that lock. This can lead to a
race condition when very quick successive role switch events happen:
CPU A
dwc3_set_mode(DWC3_GCTL_PRTCAP_HOST) // first role switch event
spin_lock_irqsave(&dwc->lock, flags);
dwc->desired_dr_role = mode; // DWC3_GCTL_PRTCAP_HOST
spin_unlock_irqrestore(&dwc->lock, flags);
queue_work(system_freezable_wq, &dwc->drd_work);
CPU B
__dwc3_set_mode
// ....
spin_lock_irqsave(&dwc->lock, flags);
// desired_dr_role is DWC3_GCTL_PRTCAP_HOST
dwc3_set_prtcap(dwc, dwc->desired_dr_role);
spin_unlock_irqrestore(&dwc->lock, flags);
CPU A
dwc3_set_mode(DWC3_GCTL_PRTCAP_DEVICE) // second event
spin_lock_irqsave(&dwc->lock, flags);
dwc->desired_dr_role = mode; // DWC3_GCTL_PRTCAP_DEVICE
spin_unlock_irqrestore(&dwc->lock, flags);
CPU B (continues running __dwc3_set_mode)
switch (dwc->desired_dr_role) { // DWC3_GCTL_PRTCAP_DEVICE
// ....
case DWC3_GCTL_PRTCAP_DEVICE:
// ....
ret = dwc3_gadget_init(dwc);
We then have DWC3_GCTL.DWC3_GCTL_PRTCAPDIR = DWC3_GCTL_PRTCAP_HOST and
dwc->current_dr_role = DWC3_GCTL_PRTCAP_HOST but initialized the
controller in device mode. It's also possible to get into a state
where both host and device are intialized at the same time.
Fix this race by creating a local copy of desired_dr_role inside
__dwc3_set_mode while holding dwc->lock.
Fixes:
41ce1456e1db ("usb: dwc3: core: make dwc3_set_mode() work properly")
Cc: stable <stable@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20221128161526.79730-1-sven@svenpeter.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Fri, 11 Nov 2022 09:47:29 +0000 (10:47 +0100)]
arm64: dts: qcom: sm8250: fix USB-DP PHY registers
commit
f8d8840c72b3df61b5252052b79020dabec01ab5 upstream.
When adding support for the DisplayPort part of the QMP PHY the binding
(and devicetree parser) for the (USB) child node was simply reused and
this has lead to some confusion.
The third DP register region is really the DP_PHY region, not "PCS" as
the binding claims, and lie at offset 0x2a00 (not 0x2c00).
Similarly, there likely are no "RX", "RX2" or "PCS_MISC" regions as
there are for the USB part of the PHY (and in any case the Linux driver
does not use them).
Note that the sixth "PCS_MISC" region is not even in the binding.
Fixes:
5aa0d1becd5b ("arm64: dts: qcom: sm8250: switch usb1 qmp phy to USB3+DP mode")
Cc: stable@vger.kernel.org # 5.13
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221111094729.11842-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chunfeng Yun [Mon, 28 Nov 2022 06:33:37 +0000 (14:33 +0800)]
usb: xhci-mtk: fix leakage of shared hcd when fail to set wakeup irq
commit
03a88b0bafbe3f548729d970d8366f48718c9b19 upstream.
Can not set the @shared_hcd to NULL before decrease the usage count
by usb_put_hcd(), this will cause the shared hcd not released.
Fixes:
04284eb74e0c ("usb: xhci-mtk: add support runtime PM")
Cc: <stable@vger.kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20221128063337.18124-1-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pawel Laszczak [Tue, 22 Nov 2022 08:51:38 +0000 (03:51 -0500)]
usb: cdnsp: fix lack of ZLP for ep0
commit
ae423ef5d095e09970f52c08020fdbf7f9d87c22 upstream.
Patch implements the handling of ZLP for control transfer.
To send the ZLP driver must prepare the extra TRB in TD with
length set to zero and TRB type to TRB_NORMAL.
The first TRB must have set TRB_CHAIN flag, TD_SIZE = 1
and TRB type to TRB_DATA.
Fixes:
3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
cc: <stable@vger.kernel.org>
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Link: https://lore.kernel.org/r/20221122085138.332434-1-pawell@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiao Zhou [Tue, 6 Dec 2022 18:53:11 +0000 (13:53 -0500)]
ALSA: hda/hdmi: Add HP Device 0x8711 to force connect list
commit
31b573946ea55e1ea0e08ae8e83bcf879b30f83a upstream.
HDMI audio is not working on the HP EliteDesk 800 G6 because the pin is
unconnected. This issue can be resolved by using the 'hdajackretask'
tool to override the unconnected pin to force it to connect.
Signed-off-by: Jiao Zhou <jiaozhou@google.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221206185311.3669950-1-jiaozhou@google.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Edward Pacman [Wed, 7 Dec 2022 13:32:18 +0000 (21:32 +0800)]
ALSA: hda/realtek: Add quirk for Lenovo TianYi510Pro-14IOB
commit
4bf5bf54476dffe60e6b6d8d539f67309ff599e2 upstream.
Lenovo TianYi510Pro-14IOB (17aa:3742)
require quirk for enabling headset-mic
Signed-off-by: Edward Pacman <edward@edward-p.xyz>
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216756
Link: https://lore.kernel.org/r/20221207133218.18989-1-edward@edward-p.xyz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wangdicheng [Wed, 7 Dec 2022 08:20:36 +0000 (16:20 +0800)]
ALSA: usb-audio: add the quirk for KT0206 device
commit
696b66ac26ef953aed5783ef26a252ec8f207013 upstream.
Add relevant information to the quirks-table.h file.
The test passes and the sound source file plays normally.
Signed-off-by: wangdicheng <wangdicheng@kylinos.cn>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/SG2PR02MB587849631CB96809CF90DBED8A1A9@SG2PR02MB5878.apcprd02.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
GUO Zihua [Wed, 21 Sep 2022 12:58:03 +0000 (20:58 +0800)]
ima: Simplify ima_lsm_copy_rule
[ Upstream commit
d57378d3aa4d864d9e590482602068af1b20c0c5 ]
Currently ima_lsm_copy_rule() set the arg_p field of the source rule to
NULL, so that the source rule could be freed afterward. It does not make
sense for this behavior to be inside a "copy" function. So move it
outside and let the caller handle this field.
ima_lsm_copy_rule() now produce a shallow copy of the original entry
including args_p field. Meaning only the lsm.rule and the rule itself
should be freed for the original rule. Thus, instead of calling
ima_lsm_free_rule() which frees lsm.rule as well as args_p field, free
the lsm.rule directly.
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
John Stultz [Wed, 21 Dec 2022 05:18:55 +0000 (05:18 +0000)]
pstore: Make sure CONFIG_PSTORE_PMSG selects CONFIG_RT_MUTEXES
[ Upstream commit
2f4fec5943407318b9523f01ce1f5d668c028332 ]
In commit
76d62f24db07 ("pstore: Switch pmsg_lock to an rt_mutex
to avoid priority inversion") I changed a lock to an rt_mutex.
However, its possible that CONFIG_RT_MUTEXES is not enabled,
which then results in a build failure, as the 0day bot detected:
https://lore.kernel.org/linux-mm/
202212211244.TwzWZD3H-lkp@intel.com/
Thus this patch changes CONFIG_PSTORE_PMSG to select
CONFIG_RT_MUTEXES, which ensures the build will not fail.
Cc: Wei Wang <wvw@google.com>
Cc: Midas Chien<midaschieh@google.com>
Cc: Connor O'Brien <connoro@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: kernel test robot <lkp@intel.com>
Cc: kernel-team@android.com
Fixes:
76d62f24db07 ("pstore: Switch pmsg_lock to an rt_mutex to avoid priority inversion")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221221051855.15761-1-jstultz@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Howells [Wed, 21 Dec 2022 14:30:48 +0000 (14:30 +0000)]
afs: Fix lost servers_outstanding count
[ Upstream commit
36f82c93ee0bd88f1c95a52537906b8178b537f1 ]
The afs_fs_probe_dispatcher() work function is passed a count on
net->servers_outstanding when it is scheduled (which may come via its
timer). This is passed back to the work_item, passed to the timer or
dropped at the end of the dispatcher function.
But, at the top of the dispatcher function, there are two checks which
skip the rest of the function: if the network namespace is being destroyed
or if there are no fileservers to probe. These two return paths, however,
do not drop the count passed to the dispatcher, and so, sometimes, the
destruction of a network namespace, such as induced by rmmod of the kafs
module, may get stuck in afs_purge_servers(), waiting for
net->servers_outstanding to become zero.
Fix this by adding the missing decrements in afs_fs_probe_dispatcher().
Fixes:
f6cbb368bcb0 ("afs: Actively poll fileservers to maintain NAT or firewall openings")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/167164544917.2072364.3759519569649459359.stgit@warthog.procyon.org.uk/
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Jihong [Tue, 20 Dec 2022 03:57:00 +0000 (11:57 +0800)]
perf debug: Set debug_peo_args and redirect_to_stderr variable to correct values in perf_quiet_option()
[ Upstream commit
188ac720d364035008a54d249cf47b4cc100f819 ]
When perf uses quiet mode, perf_quiet_option() sets the 'debug_peo_args'
variable to -1, and display_attr() incorrectly determines the value of
'debug_peo_args'. As a result, unexpected information is displayed.
Before:
# perf record --quiet -- ls > /dev/null
------------------------------------------------------------
perf_event_attr:
size 128
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|PERIOD
read_format ID|LOST
disabled 1
inherit 1
mmap 1
comm 1
freq 1
enable_on_exec 1
task 1
precise_ip 3
sample_id_all 1
exclude_guest 1
mmap2 1
comm_exec 1
ksymbol 1
bpf_event 1
------------------------------------------------------------
...
After:
# perf record --quiet -- ls > /dev/null
#
redirect_to_stderr is a similar problem.
Fixes:
f78eaef0e0493f60 ("perf tools: Allow to force redirect pr_debug to stderr.")
Fixes:
ccd26741f5e6bdf2 ("perf tool: Provide an option to print perf_event_open args and return value")
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: martin.lau@kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: https://lore.kernel.org/r/20221220035702.188413-2-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
John Stultz [Wed, 14 Dec 2022 23:18:34 +0000 (23:18 +0000)]
pstore: Switch pmsg_lock to an rt_mutex to avoid priority inversion
[ Upstream commit
76d62f24db07f22ccf9bc18ca793c27d4ebef721 ]
Wei Wang reported seeing priority inversion caused latencies
caused by contention on pmsg_lock, and suggested it be switched
to a rt_mutex.
I was initially hesitant this would help, as the tasks in that
trace all seemed to be SCHED_NORMAL, so the benefit would be
limited to only nice boosting.
However, another similar issue was raised where the priority
inversion was seen did involve a blocked RT task so it is clear
this would be helpful in that case.
Cc: Wei Wang <wvw@google.com>
Cc: Midas Chien<midaschieh@google.com>
Cc: Connor O'Brien <connoro@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: kernel-team@android.com
Fixes:
9d5438f462ab ("pstore: Add pmsg - user-space accessible pstore object")
Reported-by: Wei Wang <wvw@google.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221214231834.3711880-1-jstultz@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kees Cook [Fri, 9 Dec 2022 19:54:57 +0000 (11:54 -0800)]
LoadPin: Ignore the "contents" argument of the LSM hooks
[ Upstream commit
1a17e5b513ceebf21100027745b8731b4728edf7 ]
LoadPin only enforces the read-only origin of kernel file reads. Whether
or not it was a partial read isn't important. Remove the overly
conservative checks so that things like partial firmware reads will
succeed (i.e. reading a firmware header).
Fixes:
2039bda1fa8d ("LSM: Add "contents" flag to kernel_read_file hook")
Cc: Paul Moore <paul@paul-moore.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: linux-security-module@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Serge Hallyn <serge@hallyn.com>
Tested-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://lore.kernel.org/r/20221209195453.never.494-kees@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Khaled Almahallawy [Wed, 23 Nov 2022 22:09:26 +0000 (14:09 -0800)]
drm/i915/display: Don't disable DDI/Transcoder when setting phy test pattern
[ Upstream commit
3153eebb7a76e663ac76d6670dc113296de96622 ]
Bspecs has updated recently to remove the restriction to disable
DDI/Transcoder before setting PHY test pattern. This update is to
address PHY compliance test failures observed on a port with LTTPR.
The issue is that when Transc. is disabled, the main link signals fed
to LTTPR will be dropped invalidating link training, which will affect
the quality of the phy test pattern when the transcoder is enabled again.
v2: Update commit message (Clint)
v3: Add missing Signed-off in v2
v4: Update Bspec and commit message for pre-gen12 (Jani)
Bspec: 50482, 7555
Fixes:
8cdf72711928 ("drm/i915/dp: Program vswing, pre-emphasis, test-pattern")
Cc: Imre Deak <imre.deak@intel.com>
Cc: Clint Taylor <clinton.a.taylor@intel.com>
CC: Jani Nikula <jani.nikula@intel.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123220926.170034-1-khaled.almahallawy@intel.com
(cherry picked from commit
be4a847652056b067d6dc6fe0fc024a9e2e987ca)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Tue, 13 Dec 2022 12:33:19 +0000 (13:33 +0100)]
ASoC: rt5670: Remove unbalanced pm_runtime_put()
[ Upstream commit
6c900dcc3f7331a67ed29739d74524e428d137fb ]
For some reason rt5670_i2c_probe() does a pm_runtime_put() at the end
of a successful probe. But it has never done a pm_runtime_get() leading
to the following error being logged into dmesg:
rt5670 i2c-
10EC5640:00: Runtime PM usage count underflow!
Fix this by removing the unnecessary pm_runtime_put().
Fixes:
64e89e5f5548 ("ASoC: rt5670: Add runtime PM support")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221213123319.11285-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wang Jingjin [Thu, 8 Dec 2022 06:39:00 +0000 (14:39 +0800)]
ASoC: rockchip: spdif: Add missing clk_disable_unprepare() in rk_spdif_runtime_resume()
[ Upstream commit
6d94d0090527b1763872275a7ccd44df7219b31e ]
rk_spdif_runtime_resume() may have called clk_prepare_enable() before return
from failed branches, add missing clk_disable_unprepare() in this case.
Fixes:
f874b80e1571 ("ASoC: rockchip: Add rockchip SPDIF transceiver driver")
Signed-off-by: Wang Jingjin <wangjingjin1@huawei.com>
Link: https://lore.kernel.org/r/20221208063900.4180790-1-wangjingjin1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marek Szyprowski [Fri, 9 Dec 2022 09:16:57 +0000 (10:16 +0100)]
ASoC: wm8994: Fix potential deadlock
[ Upstream commit
9529dc167ffcdfd201b9f0eda71015f174095f7e ]
Fix this by dropping wm8994->accdet_lock while calling
cancel_delayed_work_sync(&wm8994->mic_work) in wm1811_jackdet_irq().
Fixes:
c0cc3f166525 ("ASoC: wm8994: Allow a delay between jack insertion and microphone detect")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221209091657.1183-1-m.szyprowski@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wang Yufen [Mon, 5 Dec 2022 09:56:28 +0000 (17:56 +0800)]
ASoC: mediatek: mt8183: fix refcount leak in mt8183_mt6358_ts3a227_max98357_dev_probe()
[ Upstream commit
38eef3be38ab895959c442702864212cc3beb96c ]
The node returned by of_parse_phandle() with refcount incremented,
of_node_put() needs be called when finish using it. So add it in the
error path in mt8183_mt6358_ts3a227_max98357_dev_probe().
Fixes:
11c0269017b2 ("ASoC: Mediatek: MT8183: Add machine driver with TS3A227")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Link: https://lore.kernel.org/r/1670234188-23596-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wang Jingjin [Mon, 5 Dec 2022 03:28:02 +0000 (11:28 +0800)]
ASoC: rockchip: pdm: Add missing clk_disable_unprepare() in rockchip_pdm_runtime_resume()
[ Upstream commit
ef0a098efb36660326c133af9b5a04a96a00e3ca ]
The clk_disable_unprepare() should be called in the error handling of
rockchip_pdm_runtime_resume().
Fixes:
fc05a5b22253 ("ASoC: rockchip: add support for pdm controller")
Signed-off-by: Wang Jingjin <wangjingjin1@huawei.com>
Link: https://lore.kernel.org/r/20221205032802.2422983-1-wangjingjin1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wang Yufen [Mon, 5 Dec 2022 08:15:27 +0000 (16:15 +0800)]
ASoC: audio-graph-card: fix refcount leak of cpu_ep in __graph_for_each_link()
[ Upstream commit
8ab2d12c726f0fde0692fa5d81d8019b3dcd62d0 ]
The of_get_next_child() returns a node with refcount incremented, and
decrements the refcount of prev. So in the error path of the while loop,
of_node_put() needs be called for cpu_ep.
Fixes:
fce9b90c1ab7 ("ASoC: audio-graph-card: cleanup DAI link loop method - step2")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/1670228127-13835-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wang Yufen [Mon, 5 Dec 2022 10:04:24 +0000 (18:04 +0800)]
ASoC: mediatek: mt8173-rt5650-rt5514: fix refcount leak in mt8173_rt5650_rt5514_dev_probe()
[ Upstream commit
3327d721114c109ba0575f86f8fda3b525404054 ]
The node returned by of_parse_phandle() with refcount incremented,
of_node_put() needs be called when finish using it. So add it in the
error path in mt8173_rt5650_rt5514_dev_probe().
Fixes:
0d1d7a664288 ("ASoC: mediatek: Refine mt8173 driver and change config option")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Link: https://lore.kernel.org/r/1670234664-24246-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Cezary Rojewski [Mon, 5 Dec 2022 08:53:29 +0000 (09:53 +0100)]
ASoC: Intel: Skylake: Fix driver hang during shutdown
[ Upstream commit
171107237246d66bce04f3769d33648f896b4ce3 ]
AudioDSP cores and HDAudio links need to be turned off on shutdown to
ensure no communication or data transfer occurs during the procedure.
Fixes:
c5a76a246989 ("ASoC: Intel: Skylake: Add shutdown callback")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihlaf.com>
Link: https://lore.kernel.org/r/20221205085330.857665-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pierre-Louis Bossart [Mon, 19 Sep 2022 12:10:38 +0000 (14:10 +0200)]
ALSA: hda: add snd_hdac_stop_streams() helper
[ Upstream commit
24ad3835a6db4f8857975effa6bf47730371a5ff ]
Minor code reuse, no functionality change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20220919121041.43463-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stable-dep-of:
171107237246 ("ASoC: Intel: Skylake: Fix driver hang during shutdown")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pierre-Louis Bossart [Thu, 16 Dec 2021 23:11:27 +0000 (17:11 -0600)]
ALSA/ASoC: hda: move/rename snd_hdac_ext_stop_streams to hdac_stream.c
[ Upstream commit
12054f0ce8be7d2003ec068ab27c9eb608397b98 ]
snd_hdac_ext_stop_streams() has really nothing to do with the
extension, it just loops over the bus streams.
Move it to the hdac_stream layer and rename to remove the 'ext'
prefix and add the precision that the chip will also be stopped.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20211216231128.344321-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stable-dep-of:
171107237246 ("ASoC: Intel: Skylake: Fix driver hang during shutdown")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Thu, 27 Oct 2022 06:29:31 +0000 (14:29 +0800)]
hwmon: (jc42) Fix missing unlock on error in jc42_write()
[ Upstream commit
b744db17abf6a2efc2bfa80870cc88e9799a8ccc ]
Add the missing unlock before return from function jc42_write()
in the error handling case.
Fixes:
37dedaee8bc6 ("hwmon: (jc42) Convert register access and caching to regmap/regcache")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20221027062931.598247-1-yangyingliang@huawei.com
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tyler Hicks [Fri, 23 Dec 2022 00:09:58 +0000 (18:09 -0600)]
KVM: selftests: Fix build regression by using accessor function
Fix the stable backport of commit
05c2224d4b04 ("KVM: selftests: Fix
number of pages for memory slot in memslot_modification_stress_test"),
which caused memslot_modification_stress_test.c build failures due to
trying to access private members of struct kvm_vm.
v6.0 commit
b530eba14c70 ("KVM: selftests: Get rid of
kvm_util_internal.h") and some other commits got rid of the accessors
and made all of the KVM data structures public. Keep using the accessors
in older kernels.
There is no corresponding upstream commit for this change.
Signed-off-by: Tyler Hicks (Microsoft) <code@tyhicks.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Karolina Drobnik [Fri, 23 Dec 2022 00:09:57 +0000 (18:09 -0600)]
tools/include: Add _RET_IP_ and math definitions to kernel.h
commit
5cf67a6051ea2558fd7c3d39c5a808db73073e9d upstream.
Add max_t, min_t and clamp functions, together with _RET_IP_
definition, so they can be used in testing.
Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com>
Signed-off-by: Mike Rapoport <rppt@kernel.org>
Link: https://lore.kernel.org/r/230fea382cb1e1659cdd52a55201854d38a0a149.1643796665.git.karolinadrobnik@gmail.com
[tyhicks: Backport around contextual differences due to the lack of v5.16 commit
d6e6a27d960f ("tools: Fix math.h breakage"). That commit fixed a commit
that was merged in v5.16-rc1 and, therefore, doesn't need to go back to
the stable branches.]
Signed-off-by: Tyler Hicks (Microsoft) <code@tyhicks.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Xiaoxu [Tue, 18 Oct 2022 04:40:07 +0000 (12:40 +0800)]
orangefs: Fix kmemleak in orangefs_{kernel,client}_debug_init()
[ Upstream commit
31720a2b109b3080eb77e97b8f6f50a27b4ae599 ]
When insert and remove the orangefs module, there are memory leaked
as below:
unreferenced object 0xffff88816b0cc000 (size 2048):
comm "insmod", pid 783, jiffies
4294813439 (age 65.512s)
hex dump (first 32 bytes):
6e 6f 6e 65 0a 00 00 00 00 00 00 00 00 00 00 00 none............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<
0000000031ab7788>] kmalloc_trace+0x27/0xa0
[<
000000005b405fee>] orangefs_debugfs_init.cold+0xaf/0x17f
[<
00000000e5a0085b>] 0xffffffffa02780f9
[<
000000004232d9f7>] do_one_initcall+0x87/0x2a0
[<
0000000054f22384>] do_init_module+0xdf/0x320
[<
000000003263bdea>] load_module+0x2f98/0x3330
[<
0000000052cd4153>] __do_sys_finit_module+0x113/0x1b0
[<
00000000250ae02b>] do_syscall_64+0x35/0x80
[<
00000000f11c03c7>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
Use the golbal variable as the buffer rather than dynamic allocate to
slove the problem.
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Xiaoxu [Tue, 18 Oct 2022 04:40:05 +0000 (12:40 +0800)]
orangefs: Fix kmemleak in orangefs_prepare_debugfs_help_string()
[ Upstream commit
d23417a5bf3a3afc55de5442eb46e1e60458b0a1 ]
When insert and remove the orangefs module, then debug_help_string will
be leaked:
unreferenced object 0xffff8881652ba000 (size 4096):
comm "insmod", pid 1701, jiffies
4294893639 (age 13218.530s)
hex dump (first 32 bytes):
43 6c 69 65 6e 74 20 44 65 62 75 67 20 4b 65 79 Client Debug Key
77 6f 72 64 73 20 61 72 65 20 75 6e 6b 6e 6f 77 words are unknow
backtrace:
[<
0000000004e6f8e3>] kmalloc_trace+0x27/0xa0
[<
0000000006f75d85>] orangefs_prepare_debugfs_help_string+0x5e/0x480 [orangefs]
[<
0000000091270a2a>] _sub_I_65535_1+0x57/0xf70 [crc_itu_t]
[<
000000004b1ee1a3>] do_one_initcall+0x87/0x2a0
[<
000000001d0614ae>] do_init_module+0xdf/0x320
[<
00000000efef068c>] load_module+0x2f98/0x3330
[<
000000006533b44d>] __do_sys_finit_module+0x113/0x1b0
[<
00000000a0da6f99>] do_syscall_64+0x35/0x80
[<
000000007790b19b>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
When remove the module, should always free debug_help_string. Should
always free the allocated buffer when change the free_debug_help_string.
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nathan Chancellor [Wed, 2 Nov 2022 15:56:23 +0000 (08:56 -0700)]
drm/sti: Fix return type of sti_{dvo,hda,hdmi}_connector_mode_valid()
[ Upstream commit
0ad811cc08a937d875cbad0149c1bab17f84ba05 ]
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:
drivers/gpu/drm/sti/sti_hda.c:637:16: error: incompatible function pointer types initializing 'enum drm_mode_status (*)(struct drm_connector *, struct drm_display_mode *)' with an expression of type 'int (struct drm_connector *, struct drm_display_mode *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.mode_valid = sti_hda_connector_mode_valid,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/sti/sti_dvo.c:376:16: error: incompatible function pointer types initializing 'enum drm_mode_status (*)(struct drm_connector *, struct drm_display_mode *)' with an expression of type 'int (struct drm_connector *, struct drm_display_mode *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.mode_valid = sti_dvo_connector_mode_valid,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/sti/sti_hdmi.c:1035:16: error: incompatible function pointer types initializing 'enum drm_mode_status (*)(struct drm_connector *, struct drm_display_mode *)' with an expression of type 'int (struct drm_connector *, struct drm_display_mode *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.mode_valid = sti_hdmi_connector_mode_valid,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
->mode_valid() in 'struct drm_connector_helper_funcs' expects a return
type of 'enum drm_mode_status', not 'int'. Adjust the return type of
sti_{dvo,hda,hdmi}_connector_mode_valid() to match the prototype's to
resolve the warning and CFI failure.
Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221102155623.3042869-1-nathan@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nathan Chancellor [Wed, 2 Nov 2022 15:42:15 +0000 (08:42 -0700)]
drm/fsl-dcu: Fix return type of fsl_dcu_drm_connector_mode_valid()
[ Upstream commit
96d845a67b7e406cfed7880a724c8ca6121e022e ]
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c:74:16: error: incompatible function pointer types initializing 'enum drm_mode_status (*)(struct drm_connector *, struct drm_display_mode *)' with an expression of type 'int (struct drm_connector *, struct drm_display_mode *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.mode_valid = fsl_dcu_drm_connector_mode_valid,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
->mode_valid() in 'struct drm_connector_helper_funcs' expects a return
type of 'enum drm_mode_status', not 'int'. Adjust the return type of
fsl_dcu_drm_connector_mode_valid() to match the prototype's to resolve
the warning and CFI failure.
Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221102154215.78059-1-nathan@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hawkins Jiawei [Thu, 20 Oct 2022 23:16:08 +0000 (07:16 +0800)]
hugetlbfs: fix null-ptr-deref in hugetlbfs_parse_param()
[ Upstream commit
26215b7ee923b9251f7bb12c4e5f09dc465d35f2 ]
Syzkaller reports a null-ptr-deref bug as follows:
======================================================
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:hugetlbfs_parse_param+0x1dd/0x8e0 fs/hugetlbfs/inode.c:1380
[...]
Call Trace:
<TASK>
vfs_parse_fs_param fs/fs_context.c:148 [inline]
vfs_parse_fs_param+0x1f9/0x3c0 fs/fs_context.c:129
vfs_parse_fs_string+0xdb/0x170 fs/fs_context.c:191
generic_parse_monolithic+0x16f/0x1f0 fs/fs_context.c:231
do_new_mount fs/namespace.c:3036 [inline]
path_mount+0x12de/0x1e20 fs/namespace.c:3370
do_mount fs/namespace.c:3383 [inline]
__do_sys_mount fs/namespace.c:3591 [inline]
__se_sys_mount fs/namespace.c:3568 [inline]
__x64_sys_mount+0x27f/0x300 fs/namespace.c:3568
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
[...]
</TASK>
======================================================
According to commit "vfs: parse: deal with zero length string value",
kernel will set the param->string to null pointer in vfs_parse_fs_string()
if fs string has zero length.
Yet the problem is that, hugetlbfs_parse_param() will dereference the
param->string, without checking whether it is a null pointer. To be more
specific, if hugetlbfs_parse_param() parses an illegal mount parameter,
such as "size=,", kernel will constructs struct fs_parameter with null
pointer in vfs_parse_fs_string(), then passes this struct fs_parameter to
hugetlbfs_parse_param(), which triggers the above null-ptr-deref bug.
This patch solves it by adding sanity check on param->string
in hugetlbfs_parse_param().
Link: https://lkml.kernel.org/r/20221020231609.4810-1-yin31149@gmail.com
Reported-by: syzbot+a3e6acd85ded5c16a709@syzkaller.appspotmail.com
Tested-by: syzbot+a3e6acd85ded5c16a709@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/0000000000005ad00405eb7148c6@google.com/
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Hawkins Jiawei <yin31149@gmail.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nathan Chancellor [Wed, 2 Nov 2022 16:19:06 +0000 (09:19 -0700)]
scsi: elx: libefc: Fix second parameter type in state callbacks
[ Upstream commit
3d75e766b58a7410d4e835c534e1b4664a8f62d0 ]
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function pointer
prototype to make sure the call target is valid to help mitigate ROP
attacks. If they are not identical, there is a failure at run time, which
manifests as either a kernel panic or thread getting killed. A proposed
warning in clang aims to catch these at compile time, which reveals:
drivers/scsi/elx/libefc/efc_node.c:811:22: error: incompatible function pointer types assigning to 'void (*)(struct efc_sm_ctx *, u32, void *)' (aka 'void (*)(struct efc_sm_ctx *, unsigned int, void *)') from 'void (*)(struct efc_sm_ctx *, enum efc_sm_event, void *)' [-Werror,-Wincompatible-function-pointer-types-strict]
ctx->current_state = state;
^ ~~~~~
drivers/scsi/elx/libefc/efc_node.c:878:21: error: incompatible function pointer types assigning to 'void (*)(struct efc_sm_ctx *, u32, void *)' (aka 'void (*)(struct efc_sm_ctx *, unsigned int, void *)') from 'void (*)(struct efc_sm_ctx *, enum efc_sm_event, void *)' [-Werror,-Wincompatible-function-pointer-types-strict]
node->nodedb_state = state;
^ ~~~~~
drivers/scsi/elx/libefc/efc_node.c:905:6: error: incompatible function pointer types assigning to 'void (*)(struct efc_sm_ctx *, enum efc_sm_event, void *)' from 'void (*)(struct efc_sm_ctx *, u32, void *)' (aka 'void (*)(struct efc_sm_ctx *, unsigned int, void *)') [-Werror,-Wincompatible-function-pointer-types-strict]
pf = node->nodedb_state;
^ ~~~~~~~~~~~~~~~~~~
drivers/scsi/elx/libefc/efc_device.c:455:22: error: incompatible function pointer types assigning to 'void (*)(struct efc_sm_ctx *, u32, void *)' (aka 'void (*)(struct efc_sm_ctx *, unsigned int, void *)') from 'void (struct efc_sm_ctx *, enum efc_sm_event, void *)' [-Werror,-Wincompatible-function-pointer-types-strict]
node->nodedb_state = __efc_d_init;
^ ~~~~~~~~~~~~
drivers/scsi/elx/libefc/efc_sm.c:41:22: error: incompatible function pointer types assigning to 'void (*)(struct efc_sm_ctx *, u32, void *)' (aka 'void (*)(struct efc_sm_ctx *, unsigned int, void *)') from 'void (*)(struct efc_sm_ctx *, enum efc_sm_event, void *)' [-Werror,-Wincompatible-function-pointer-types-strict]
ctx->current_state = state;
^ ~~~~~
The type of the second parameter in the prototypes of ->current_state() and
->nodedb_state() ('u32') does not match the implementations, which have a
second parameter type of 'enum efc_sm_event'. Update the prototypes to have
the correct second parameter type, clearing up all the warnings and CFI
failures.
Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20221102161906.2781508-1-nathan@kernel.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bart Van Assche [Tue, 18 Oct 2022 20:29:54 +0000 (13:29 -0700)]
scsi: ufs: Reduce the START STOP UNIT timeout
[ Upstream commit
dcd5b7637c6d442d957f73780a03047413ed3a10 ]
Reduce the START STOP UNIT command timeout to one second since on Android
devices a kernel panic is triggered if an attempt to suspend the system
takes more than 20 seconds. One second should be enough for the START STOP
UNIT command since this command completes in less than a millisecond for
the UFS devices I have access to.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221018202958.1902564-7-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Justin Tee [Mon, 17 Oct 2022 16:43:20 +0000 (09:43 -0700)]
scsi: lpfc: Fix hard lockup when reading the rx_monitor from debugfs
[ Upstream commit
c44e50f4a0ec00c2298f31f91bc2c3e9bbd81c7e ]
During I/O and simultaneous cat of /sys/kernel/debug/lpfc/fnX/rx_monitor, a
hard lockup similar to the call trace below may occur.
The spin_lock_bh in lpfc_rx_monitor_report is not protecting from timer
interrupts as expected, so change the strength of the spin lock to _irq.
Kernel panic - not syncing: Hard LOCKUP
CPU: 3 PID: 110402 Comm: cat Kdump: loaded
exception RIP: native_queued_spin_lock_slowpath+91
[IRQ stack]
native_queued_spin_lock_slowpath at
ffffffffb814e30b
_raw_spin_lock at
ffffffffb89a667a
lpfc_rx_monitor_record at
ffffffffc0a73a36 [lpfc]
lpfc_cmf_timer at
ffffffffc0abbc67 [lpfc]
__hrtimer_run_queues at
ffffffffb8184250
hrtimer_interrupt at
ffffffffb8184ab0
smp_apic_timer_interrupt at
ffffffffb8a026ba
apic_timer_interrupt at
ffffffffb8a01c4f
[End of IRQ stack]
apic_timer_interrupt at
ffffffffb8a01c4f
lpfc_rx_monitor_report at
ffffffffc0a73c80 [lpfc]
lpfc_rx_monitor_read at
ffffffffc0addde1 [lpfc]
full_proxy_read at
ffffffffb83e7fc3
vfs_read at
ffffffffb833fe71
ksys_read at
ffffffffb83402af
do_syscall_64 at
ffffffffb800430b
entry_SYSCALL_64_after_hwframe at
ffffffffb8a000ad
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20221017164323.14536-2-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhiqi Song [Sat, 24 Sep 2022 07:38:31 +0000 (15:38 +0800)]
crypto: hisilicon/hpre - fix resource leak in remove process
[ Upstream commit
45e6319bd5f2154d8b8c9f1eaa4ac030ba0d330c ]
In hpre_remove(), when the disable operation of qm sriov failed,
the following logic should continue to be executed to release the
remaining resources that have been allocated, instead of returning
directly, otherwise there will be resource leakage.
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xiu Jianfeng [Tue, 22 Nov 2022 13:36:14 +0000 (21:36 +0800)]
clk: st: Fix memory leak in st_of_quadfs_setup()
[ Upstream commit
cfd3ffb36f0d566846163118651d868e607300ba ]
If st_clk_register_quadfs_pll() fails, @lock should be freed before goto
@err_exit, otherwise will cause meory leak issue, fix it.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Link: https://lore.kernel.org/r/20221122133614.184910-1-xiujianfeng@huawei.com
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shigeru Yoshida [Tue, 22 Nov 2022 18:51:59 +0000 (03:51 +0900)]
media: si470x: Fix use-after-free in si470x_int_in_callback()
[ Upstream commit
7d21e0b1b41b21d628bf2afce777727bd4479aa5 ]
syzbot reported use-after-free in si470x_int_in_callback() [1]. This
indicates that urb->context, which contains struct si470x_device
object, is freed when si470x_int_in_callback() is called.
The cause of this issue is that si470x_int_in_callback() is called for
freed urb.
si470x_usb_driver_probe() calls si470x_start_usb(), which then calls
usb_submit_urb() and si470x_start(). If si470x_start_usb() fails,
si470x_usb_driver_probe() doesn't kill urb, but it just frees struct
si470x_device object, as depicted below:
si470x_usb_driver_probe()
...
si470x_start_usb()
...
usb_submit_urb()
retval = si470x_start()
return retval
if (retval < 0)
free struct si470x_device object, but don't kill urb
This patch fixes this issue by killing urb when si470x_start_usb()
fails and urb is submitted. If si470x_start_usb() fails and urb is
not submitted, i.e. submitting usb fails, it just frees struct
si470x_device object.
Reported-by: syzbot+9ca7a12fd736d93e0232@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=94ed6dddd5a55e90fd4bab942aa4bb297741d977
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wolfram Sang [Sun, 20 Nov 2022 11:34:55 +0000 (12:34 +0100)]
mmc: renesas_sdhi: better reset from HS400 mode
[ Upstream commit
0da69dd2155019ed4c444ede0e79ce7a4a6af627 ]
Up to now, HS400 adjustment mode was only disabled on soft reset when a
calibration table was in use. It is safer, though, to disable it as soon
as the instance has an adjustment related quirk set, i.e. bad taps or a
calibration table.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20221120113457.42010-3-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kunihiko Hayashi [Fri, 11 Nov 2022 08:10:33 +0000 (17:10 +0900)]
mmc: f-sdh30: Add quirks for broken timeout clock capability
[ Upstream commit
aae9d3a440736691b3c1cb09ae2c32c4f1ee2e67 ]
There is a case where the timeout clock is not supplied to the capability.
Add a quirk for that.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Link: https://lore.kernel.org/r/20221111081033.3813-7-hayashi.kunihiko@socionext.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lorenzo Bianconi [Thu, 13 Oct 2022 19:07:37 +0000 (21:07 +0200)]
wifi: mt76: do not run mt76u_status_worker if the device is not running
[ Upstream commit
bd5dac7ced5a7c9faa4dc468ac9560c3256df845 ]
Fix the following NULL pointer dereference avoiding to run
mt76u_status_worker thread if the device is not running yet.
KASAN: null-ptr-deref in range
[0x0000000000000000-0x0000000000000007]
CPU: 0 PID: 98 Comm: kworker/u2:2 Not tainted 5.14.0+ #78 Hardware
name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Workqueue: mt76 mt76u_tx_status_data
RIP: 0010:mt76x02_mac_fill_tx_status.isra.0+0x82c/0x9e0
Code: c5 48 b8 00 00 00 00 00 fc ff df 80 3c 02 00 0f 85 94 01 00 00
48 b8 00 00 00 00 00 fc ff df 4d 8b 34 24 4c 89 f2 48 c1 ea 03 <0f>
b6
04 02 84 c0 74 08 3c 03 0f 8e 89 01 00 00 41 8b 16 41 0f b7
RSP: 0018:
ffffc900005af988 EFLAGS:
00010246
RAX:
dffffc0000000000 RBX:
ffffc900005afae8 RCX:
0000000000000000
RDX:
0000000000000000 RSI:
ffffffff832fc661 RDI:
ffffc900005afc2a
RBP:
ffffc900005afae0 R08:
0000000000000001 R09:
fffff520000b5f3c
R10:
0000000000000003 R11:
fffff520000b5f3b R12:
ffff88810b6132d8
R13:
000000000000ffff R14:
0000000000000000 R15:
ffffc900005afc28
FS:
0000000000000000(0000) GS:
ffff88811aa00000(0000)
knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007fa0eda6a000 CR3:
0000000118f17000 CR4:
0000000000750ef0
PKRU:
55555554
Call Trace:
mt76x02_send_tx_status+0x1d2/0xeb0
mt76x02_tx_status_data+0x8e/0xd0
mt76u_tx_status_data+0xe1/0x240
process_one_work+0x92b/0x1460
worker_thread+0x95/0xe00
kthread+0x3a1/0x480
ret_from_fork+0x1f/0x30
Modules linked in:
--[ end trace
8df5d20fc5040f65 ]--
RIP: 0010:mt76x02_mac_fill_tx_status.isra.0+0x82c/0x9e0
Code: c5 48 b8 00 00 00 00 00 fc ff df 80 3c 02 00 0f 85 94 01 00 00
48 b8 00 00 00 00 00 fc ff df 4d 8b 34 24 4c 89 f2 48 c1 ea 03 <0f>
b6
04 02 84 c0 74 08 3c 03 0f 8e 89 01 00 00 41 8b 16 41 0f b7
RSP: 0018:
ffffc900005af988 EFLAGS:
00010246
RAX:
dffffc0000000000 RBX:
ffffc900005afae8 RCX:
0000000000000000
RDX:
0000000000000000 RSI:
ffffffff832fc661 RDI:
ffffc900005afc2a
RBP:
ffffc900005afae0 R08:
0000000000000001 R09:
fffff520000b5f3c
R10:
0000000000000003 R11:
fffff520000b5f3b R12:
ffff88810b6132d8
R13:
000000000000ffff R14:
0000000000000000 R15:
ffffc900005afc28
FS:
0000000000000000(0000) GS:
ffff88811aa00000(0000)
knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007fa0eda6a000 CR3:
0000000118f17000 CR4:
0000000000750ef0
PKRU:
55555554
Moreover move stat_work schedule out of the for loop.
Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr>
Co-developed-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rui Zhang [Thu, 1 Dec 2022 03:38:06 +0000 (11:38 +0800)]
regulator: core: fix use_count leakage when handling boot-on
[ Upstream commit
0591b14ce0398125439c759f889647369aa616a0 ]
I found a use_count leakage towards supply regulator of rdev with
boot-on option.
┌───────────────────┐ ┌───────────────────┐
│ regulator_dev A │ │ regulator_dev B │
│ (boot-on) │ │ (boot-on) │
│ use_count=0 │◀──supply──│ use_count=1 │
│ │ │ │
└───────────────────┘ └───────────────────┘
In case of rdev(A) configured with `regulator-boot-on', the use_count
of supplying regulator(B) will increment inside
regulator_enable(rdev->supply).
Thus, B will acts like always-on, and further balanced
regulator_enable/disable cannot actually disable it anymore.
However, B was also configured with `regulator-boot-on', we wish it
could be disabled afterwards.
Signed-off-by: Rui Zhang <zr.zhang@vivo.com>
Link: https://lore.kernel.org/r/20221201033806.2567812-1-zr.zhang@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / platform / kernel / linux-rpi.git / log