dmaengine: stm32-mdma: use Link Address Register to compute residue

commit a4b306eb83579c07b63dc65cd5bae53b7b4019d0 upstream.

Current implementation relies on curr_hwdesc index. But to keep this index
up to date, Block Transfer interrupt (BTIE) has to be enabled.
If it is not, curr_hwdesc is not updated, and then residue is not reliable.
Rely on Link Address Register instead. And disable BTIE interrupt
in stm32_mdma_setup_xfer() because it is no more needed in case of
_prep_slave_sg() to maintain curr_hwdesc up to date.
It avoids extra interrupts and also ensures a reliable residue. These
improvements are required for STM32 DCMI camera capture use case, which
need STM32 DMA and MDMA chaining for good performance.

Fixes: 696874322771 ("dmaengine: stm32-mdma: add support to be triggered by STM32 DMA")
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231004163531.2864160-2-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: stm32-dma: fix residue in case of MDMA chaining

commit 67e13e89742c3b21ce177f612bf9ef32caae6047 upstream.

In case of MDMA chaining, DMA is configured in Double-Buffer Mode (DBM)
with two periods, but if transfer has been prepared with _prep_slave_sg(),
the transfer is not marked cyclic (=!chan->desc->cyclic). However, as DBM
is activated for MDMA chaining, residue computation must take into account
cyclic constraints.

With only two periods in MDMA chaining, and no update due to Transfer
Complete interrupt masked, n_sg is always 0. If DMA current memory address
(depending on SxCR.CT and SxM0AR/SxM1AR) does not correspond, it means n_sg
should be increased.
Then, the residue of the current period is the one read from SxNDTR and
should not be overwritten with the full period length.

Fixes: 723795173ce1 ("dmaengine: stm32-dma: add support to trigger STM32 MDMA")
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231004155024.2609531-2-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: stm32-dma: fix stm32_dma_prep_slave_sg in case of MDMA chaining

commit 2df467e908ce463cff1431ca1b00f650f7a514b4 upstream.

Current Target (CT) have to be reset when starting an MDMA chaining use
case, as Double Buffer mode is activated. It ensures the DMA will start
processing the first memory target (pointed with SxM0AR).

Fixes: 723795173ce1 ("dmaengine: stm32-dma: add support to trigger STM32 MDMA")
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231004155024.2609531-1-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: stm32-mdma: abort resume if no ongoing transfer

commit 81337b9a72dc58a5fa0ae8a042e8cb59f9bdec4a upstream.

chan->desc can be null, if transfer is terminated when resume is called,
leading to a NULL pointer when retrieving the hwdesc.
To avoid this case, check that chan->desc is not null and channel is
disabled (transfer previously paused or terminated).

Fixes: a4ffb13c8946 ("dmaengine: Add STM32 MDMA driver")
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231004163531.2864160-1-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: enforce receive buffer memory limits by allowing the tcp window to shrink

[ Upstream commit b650d953cd391595e536153ce30b4aab385643ac ]

Under certain circumstances, the tcp receive buffer memory limit
set by autotuning (sk_rcvbuf) is increased due to incoming data
packets as a result of the window not closing when it should be.
This can result in the receive buffer growing all the way up to
tcp_rmem[2], even for tcp sessions with a low BDP.

To reproduce:  Connect a TCP session with the receiver doing
nothing and the sender sending small packets (an infinite loop
of socket send() with 4 bytes of payload with a sleep of 1 ms
in between each send()).  This will cause the tcp receive buffer
to grow all the way up to tcp_rmem[2].

As a result, a host can have individual tcp sessions with receive
buffers of size tcp_rmem[2], and the host itself can reach tcp_mem
limits, causing the host to go into tcp memory pressure mode.

The fundamental issue is the relationship between the granularity
of the window scaling factor and the number of byte ACKed back
to the sender.  This problem has previously been identified in
RFC 7323, appendix F [1].

The Linux kernel currently adheres to never shrinking the window.

In addition to the overallocation of memory mentioned above, the
current behavior is functionally incorrect, because once tcp_rmem[2]
is reached when no remediations remain (i.e. tcp collapse fails to
free up any more memory and there are no packets to prune from the
out-of-order queue), the receiver will drop in-window packets
resulting in retransmissions and an eventual timeout of the tcp
session.  A receive buffer full condition should instead result
in a zero window and an indefinite wait.

In practice, this problem is largely hidden for most flows.  It
is not applicable to mice flows.  Elephant flows can send data
fast enough to "overrun" the sk_rcvbuf limit (in a single ACK),
triggering a zero window.

But this problem does show up for other types of flows.  Examples
are websockets and other type of flows that send small amounts of
data spaced apart slightly in time.  In these cases, we directly
encounter the problem described in [1].

RFC 7323, section 2.4 [2], says there are instances when a retracted
window can be offered, and that TCP implementations MUST ensure
that they handle a shrinking window, as specified in RFC 1122,
section 4.2.2.16 [3].  All prior RFCs on the topic of tcp window
management have made clear that sender must accept a shrunk window
from the receiver, including RFC 793 [4] and RFC 1323 [5].

This patch implements the functionality to shrink the tcp window
when necessary to keep the right edge within the memory limit by
autotuning (sk_rcvbuf).  This new functionality is enabled with
the new sysctl: net.ipv4.tcp_shrink_window

Additional information can be found at:
https://blog.cloudflare.com/unbounded-memory-usage-by-tcp-for-receive-buffers-and-how-we-fixed-it/

[1] https://www.rfc-editor.org/rfc/rfc7323#appendix-F
[2] https://www.rfc-editor.org/rfc/rfc7323#section-2.4
[3] https://www.rfc-editor.org/rfc/rfc1122#page-91
[4] https://www.rfc-editor.org/rfc/rfc793
[5] https://www.rfc-editor.org/rfc/rfc1323

Signed-off-by: Mike Freemon <mfreemon@cloudflare.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

workqueue: Override implicit ordered attribute in workqueue_apply_unbound_cpumask()

[ Upstream commit ca10d851b9ad0338c19e8e3089e24d565ebfffd7 ]

Commit 5c0338c68706 ("workqueue: restore WQ_UNBOUND/max_active==1
to be ordered") enabled implicit ordered attribute to be added to
WQ_UNBOUND workqueues with max_active of 1. This prevented the changing
of attributes to these workqueues leading to fix commit 0a94efb5acbb
("workqueue: implicit ordered attribute should be overridable").

However, workqueue_apply_unbound_cpumask() was not updated at that time.
So sysfs changes to wq_unbound_cpumask has no effect on WQ_UNBOUND
workqueues with implicit ordered attribute. Since not all WQ_UNBOUND
workqueues are visible on sysfs, we are not able to make all the
necessary cpumask changes even if we iterates all the workqueue cpumasks
in sysfs and changing them one by one.

Fix this problem by applying the corresponding change made
to apply_workqueue_attrs_locked() in the fix commit to
workqueue_apply_unbound_cpumask().

Fixes: 5c0338c68706 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfc: nci: assert requested protocol is valid

[ Upstream commit 354a6e707e29cb0c007176ee5b8db8be7bd2dee0 ]

The protocol is used in a bit mask to determine if the protocol is
supported. Assert the provided protocol is less than the maximum
defined so it doesn't potentially perform a shift-out-of-bounds and
provide a clearer error for undefined protocols vs unsupported ones.

Fixes: 6a2968aaf50c ("NFC: basic NCI protocol implementation")
Reported-and-tested-by: syzbot+0839b78e119aae1fec78@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=0839b78e119aae1fec78
Signed-off-by: Jeremy Cline <jeremy@jcline.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231009200054.82557-1-jeremy@jcline.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: renesas: rzn1: Enable missing PINMUX

[ Upstream commit f055ff23c331f28aa4ace4b72dc56f63b9a726c8 ]

Enable pin muxing (eg. programmable function), so that the RZ/N1 GPIO
pins will be configured as specified by the pinmux in the DTS.

This used to be enabled implicitly via CONFIG_GENERIC_PINMUX_FUNCTIONS,
however that was removed, since the RZ/N1 driver does not call any of
the generic pinmux functions.

Fixes: 1308fb4e4eae14e6 ("pinctrl: rzn1: Do not select GENERIC_PIN{CTRL_GROUPS,MUX_FUNCTIONS}")
Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231004200008.1306798-1-ralph.siemsen@linaro.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/smc: Fix pos miscalculation in statistics

[ Upstream commit a950a5921db450c74212327f69950ff03419483a ]

SMC_STAT_PAYLOAD_SUB(_smc_stats, _tech, key, _len, _rc) will calculate
wrong bucket positions for payloads of exactly 4096 bytes and
(1 << (m + 12)) bytes, with m == SMC_BUF_MAX - 1.

Intended bucket distribution:
Assume l == size of payload, m == SMC_BUF_MAX - 1.

Bucket 0                : 0 < l <= 2^13
Bucket n, 1 <= n <= m-1 : 2^(n+12) < l <= 2^(n+13)
Bucket m                : l > 2^(m+12)

Current solution:
_pos = fls64((l) >> 13)
[...]
_pos = (_pos < m) ? ((l == 1 << (_pos + 12)) ? _pos - 1 : _pos) : m

For l == 4096, _pos == -1, but should be _pos == 0.
For l == (1 << (m + 12)), _pos == m, but should be _pos == m - 1.

In order to avoid special treatment of these corner cases, the
calculation is adjusted. The new solution first subtracts the length by
one, and then calculates the correct bucket by shifting accordingly,
i.e. _pos = fls64((l - 1) >> 13), l > 0.
This not only fixes the issues named above, but also makes the whole
bucket assignment easier to follow.

Same is done for SMC_STAT_RMB_SIZE_SUB(_smc_stats, _tech, k, _len),
where the calculation of the bucket position is similar to the one
named above.

Fixes: e0e4b8fa5338 ("net/smc: Add SMC statistics support")
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Nils Hoppmann <niho@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: nfc: fix races in nfc_llcp_sock_get() and nfc_llcp_sock_get_sn()

[ Upstream commit 31c07dffafce914c1d1543c135382a11ff058d93 ]

Sili Luo reported a race in nfc_llcp_sock_get(), leading to UAF.

Getting a reference on the socket found in a lookup while
holding a lock should happen before releasing the lock.

nfc_llcp_sock_get_sn() has a similar problem.

Finally nfc_llcp_recv_snl() needs to make sure the socket
found by nfc_llcp_sock_from_sn() does not disappear.

Fixes: 8f50020ed9b8 ("NFC: LLCP late binding")
Reported-by: Sili Luo <rootlab@huawei.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willy Tarreau <w@1wt.eu>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231009123110.3735515-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Again mutually exclude RX-FCS and RX-port-timestamp

[ Upstream commit da6192ca72d5ad913d109d43dc896290ad05d98f ]

Commit 1e66220948df8 ("net/mlx5e: Update rx ring hw mtu upon each rx-fcs
flag change") seems to have accidentally inverted the logic added in
commit 0bc73ad46a76 ("net/mlx5e: Mutually exclude RX-FCS and
RX-port-timestamp").

The impact of this is a little unclear since it seems the FCS scattered
with RX-FCS is (usually?) correct regardless.

Fixes: 1e66220948df8 ("net/mlx5e: Update rx ring hw mtu upon each rx-fcs flag change")
Tested-by: Charlotte Tan <charlotte@extrahop.com>
Reviewed-by: Charlotte Tan <charlotte@extrahop.com>
Cc: Adham Faris <afaris@nvidia.com>
Cc: Aya Levin <ayal@nvidia.com>
Cc: Tariq Toukan <tariqt@nvidia.com>
Cc: Moshe Shemesh <moshe@nvidia.com>
Cc: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Will Mortensen <will@extrahop.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20231006053706.514618-1-will@extrahop.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ixgbe: fix crash with empty VF macvlan list

[ Upstream commit 7b5add9af567c44e12196107f0fe106e194034fd ]

The adapter->vf_mvs.l list needs to be initialized even if the list is
empty.  Otherwise it will lead to crashes.

Fixes: a1cbb15c1397 ("ixgbe: Add macvlan support for VF")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Link: https://lore.kernel.org/r/ZSADNdIw8zFx1xw2@kadam
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: macsec: use update_pn flag instead of PN comparation

[ Upstream commit fde2f2d7f23d39f2fc699ba6d91ac3f4a2e637ca ]

When updating the SA, use the new update_pn flags instead of comparing the
new PN with the initial one.

Comparing the initial PN value with the new value will allow the user
to update the SA using the initial PN value as a parameter like this:
$ ip macsec add macsec0 tx sa 0 pn 1 on key 00 \
ead3664f508eb06c40ac7104cdae4ce5
$ ip macsec set macsec0 tx sa 0 pn 1 off

Fixes: 8ff0ac5be144 ("net/mlx5: Add MACsec offload Tx command support")
Fixes: aae3454e4d4c ("net/mlx5e: Add MACsec offload Rx command support")
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: mscc: macsec: reject PN update requests

[ Upstream commit e0a8c918daa58700609ebd45e3fcd49965be8bbc ]

Updating the PN is not supported.
Return -EINVAL if update_pn is true.

The following command succeeded, but it should fail because the driver
does not update the PN:
ip macsec set macsec0 tx sa 0 pn 232 on

Fixes: 28c5107aa904 ("net: phy: mscc: macsec support")
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: macsec: indicate next pn update when offloading

[ Upstream commit 0412cc846a1ef38697c3f321f9b174da91ecd3b5 ]

Indicate next PN update using update_pn flag in macsec_context.
Offloaded MACsec implementations does not know whether or not the
MACSEC_SA_ATTR_PN attribute was passed for an SA update and assume
that next PN should always updated, but this is not always true.

The PN can be reset to its initial value using the following command:
$ ip macsec set macsec0 tx sa 0 off #octeontx2-pf case

Or, the update PN command will succeed even if the driver does not support
PN updates.
$ ip macsec set macsec0 tx sa 0 pn 1 on #mscc phy driver case

Comparing the initial PN with the new PN value is not a solution. When
the user updates the PN using its initial value the command will
succeed, even if the driver does not support it. Like this:
$ ip macsec add macsec0 tx sa 0 pn 1 on key 00 \
ead3664f508eb06c40ac7104cdae4ce5
$ ip macsec set macsec0 tx sa 0 pn 1 on #mlx5 case

Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: e0a8c918daa5 ("net: phy: mscc: macsec: reject PN update requests")
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: refine debug info in skb_checksum_help()

[ Upstream commit 26c29961b142444cd99361644c30fa1e9b3da6be ]

syzbot uses panic_on_warn.

This means that the skb_dump() I added in the blamed commit are
not even called.

Rewrite this so that we get the needed skb dump before syzbot crashes.

Fixes: eeee4b77dc52 ("net: add more debug info in skb_checksum_help()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231006173355.2254983-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Fix verifier log for async callback return values

[ Upstream commit 829955981c557c7fc7416581c4cd68a8a0c28620 ]

The verifier, as part of check_return_code(), verifies that async
callbacks such as from e.g. timers, will return 0. It does this by
correctly checking that R0->var_off is in tnum_const(0), which
effectively checks that it's in a range of 0. If this condition fails,
however, it prints an error message which says that the value should
have been in (0x0; 0x1). This results in possibly confusing output such
as the following in which an async callback returns 1:

  At async callback the register R0 has value (0x1; 0x0) should have been in (0x0; 0x1)

The fix is easy -- we should just pass the tnum_const(0) as the correct
range to verbose_invalid_scalar(), which will then print the following:

  At async callback the register R0 has value (0x1; 0x0) should have been in (0x0; 0x0)

Fixes: bfc6bb74e4f1 ("bpf: Implement verifier support for validation of async callbacks.")
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20231009161414.235829-1-void@manifault.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vmwgfx: fix typo of sizeof argument

[ Upstream commit 39465cac283702a7d4a507a558db81898029c6d3 ]

Since size of 'header' pointer and '*header' structure is equal on 64-bit
machines issue probably didn't cause any wrong behavior. But anyway,
fixing typo is required.

Fixes: 7a73ba7469cb ("drm/vmwgfx: Use TTM handles instead of SIDs as user-space surface handles.")
Co-developed-by: Ivanov Mikhail <ivanov.mikhail1@huawei-partners.com>
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230905100203.1716731-1-konstantin.meskhidze@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv, bpf: Sign-extend return values

[ Upstream commit 2f1b0d3d733169eb11680bfa97c266ae5e757148 ]

The RISC-V architecture does not expose sub-registers, and hold all
32-bit values in a sign-extended format [1] [2]:

  | The compiler and calling convention maintain an invariant that all
  | 32-bit values are held in a sign-extended format in 64-bit
  | registers. Even 32-bit unsigned integers extend bit 31 into bits
  | 63 through 32. Consequently, conversion between unsigned and
  | signed 32-bit integers is a no-op, as is conversion from a signed
  | 32-bit integer to a signed 64-bit integer.

While BPF, on the other hand, exposes sub-registers, and use
zero-extension (similar to arm64/x86).

This has led to some subtle bugs, where a BPF JITted program has not
sign-extended the a0 register (return value in RISC-V land), passed
the return value up the kernel, e.g.:

  | int from_bpf(void);
  |
  | long foo(void)
  | {
  |    return from_bpf();
  | }

Here, a0 would be 0xffff_ffff, instead of the expected
0xffff_ffff_ffff_ffff.

Internally, the RISC-V JIT uses a5 as a dedicated register for BPF
return values.

Keep a5 zero-extended, but explicitly sign-extend a0 (which is used
outside BPF land). Now that a0 (RISC-V ABI) and a5 (BPF ABI) differs,
a0 is only moved to a5 for non-BPF native calls (BPF_PSEUDO_CALL).

Fixes: 2353ecc6f91f ("bpf, riscv: add BPF JIT for RV64G")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://github.com/riscv/riscv-isa-manual/releases/download/riscv-isa-release-056b6ff-2023-10-02/unpriv-isa-asciidoc.pdf
Link: https://github.com/riscv-non-isa/riscv-elf-psabi-doc/releases/download/draft-20230929-e5c800e661a53efe3c2678d71a306323b60eb13b/riscv-abi.pdf
Link: https://lore.kernel.org/bpf/20231004120706.52848-2-bjorn@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv, bpf: Factor out emit_call for kernel and bpf context

[ Upstream commit 0fd1fd0104954380477353aea29c347e85dff16d ]

The current emit_call function is not suitable for kernel function call as
it store return value to bpf R0 register. We can separate it out for common
use. Meanwhile, simplify judgment logic, that is, fixed function address
can use jal or auipc+jalr, while the unfixed can use only auipc+jalr.

Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/bpf/20230215135205.1411105-3-pulehui@huaweicloud.com
Stable-dep-of: 2f1b0d3d7331 ("riscv, bpf: Sign-extend return values")
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen-netback: use default TX queue size for vifs

[ Upstream commit 66cf7435a26917c0c4d6245ad9137e7606e84fdf ]

Do not set netback interfaces (vifs) default TX queue size to the ring size.
The TX queue size is not related to the ring size, and using the ring size (32)
as the queue size can lead to packet drops.  Note the TX side of the vif
interface in the netback domain is the one receiving packets to be injected
to the guest.

Do not explicitly set the TX queue length to any value when creating the
interface, and instead use the system default.  Note that the queue length can
also be adjusted at runtime.

Fixes: f942dc2552b8 ('xen network backend driver')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mlxsw: fix mlxsw_sp2_nve_vxlan_learning_set() return type

[ Upstream commit 1e0b72a2a6432c0ef67ee5ce8d9172a7c20bba25 ]

The mlxsw_sp2_nve_vxlan_learning_set() function is supposed to return
zero on success or negative error codes.  So it needs to be type int
instead of bool.

Fixes: 4ee70efab68d ("mlxsw: spectrum_nve: Add support for VXLAN on Spectrum-2")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ieee802154: ca8210: Fix a potential UAF in ca8210_probe

[ Upstream commit f990874b1c98fe8e57ee9385669f501822979258 ]

If of_clk_add_provider() fails in ca8210_register_ext_clock(),
it calls clk_unregister() to release priv->clk and returns an
error. However, the caller ca8210_probe() then calls ca8210_remove(),
where priv->clk is freed again in ca8210_unregister_ext_clock(). In
this case, a use-after-free may happen in the second time we call
clk_unregister().

Fix this by removing the first clk_unregister(). Also, priv->clk could
be an error code on failure of clk_register_fixed_rate(). Use
IS_ERR_OR_NULL to catch this case in ca8210_unregister_ext_clock().

Fixes: ded845a781a5 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Message-ID: <20231007033049.22353-1-dinghao.liu@zju.edu.cn>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ravb: Fix use-after-free issue in ravb_tx_timeout_work()

[ Upstream commit 3971442870713de527684398416970cf025b4f89 ]

The ravb_stop() should call cancel_work_sync(). Otherwise,
ravb_tx_timeout_work() is possible to use the freed priv after
ravb_remove() was called like below:

CPU0 CPU1
ravb_tx_timeout()
ravb_remove()
unregister_netdev()
free_netdev(ndev)
// free priv
ravb_tx_timeout_work()
// use priv

unregister_netdev() will call .ndo_stop() so that ravb_stop() is
called. And, after phy_stop() is called, netif_carrier_off()
is also called. So that .ndo_tx_timeout() will not be called
after phy_stop().

Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Reported-by: Zheng Wang <zyytlz.wz@163.com>
Closes: https://lore.kernel.org/netdev/20230725030026.1664873-1-zyytlz.wz@163.com/
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20231005011201.14368-3-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ravb: Fix up dma_free_coherent() call in ravb_remove()

[ Upstream commit e6864af61493113558c502b5cd0d754c19b93277 ]

In ravb_remove(), dma_free_coherent() should be call after
unregister_netdev(). Otherwise, this controller is possible to use
the freed buffer.

Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20231005011201.14368-2-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: mediatek: mt8195: Set DSU PMU status to fail

[ Upstream commit d192615c307ec9f74cd0582880ece698533eb99b ]

The DSU PMU allows monitoring performance events in the DSU cluster,
which is done by configuring and reading back values from the DSU PMU
system registers. However, for write-access to be allowed by ELs lower
than EL3, the EL3 firmware needs to update the setting on the ACTLR3_EL3
register, as it is disallowed by default.

That configuration is not done on the firmware used by the MT8195 SoC,
as a consequence, booting a MT8195-based machine like
mt8195-cherry-tomato-r2 with CONFIG_ARM_DSU_PMU enabled hangs the kernel
just as it writes to the CLUSTERPMOVSCLR_EL1 register, since the
instruction faults to EL3, and BL31 apparently just re-runs the
instruction over and over.

Mark the DSU PMU node in the Devicetree with status "fail", as the
machine doesn't have a suitable firmware to make use of it from the
kernel, and allowing its driver to probe would hang the kernel.

Fixes: 37f2582883be ("arm64: dts: Add mediatek SoC mt8195 and evaluation board")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230720200753.322133-1-nfraprado@collabora.com
Link: https://lore.kernel.org/r/20231003-mediatek-fixes-v6-7-v1-5-dad7cd62a8ff@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: sun4i_can: Only show Kconfig if ARCH_SUNXI is set

[ Upstream commit 1f223208ebdef84f21c15e9958c005a93c871aa2 ]

When adding the RISCV option I didn't gate it behind ARCH_SUNXI.
As a result this option shows up with Allwinner support isn't enabled.
Fix that by requiring ARCH_SUNXI to be set if RISCV is set.

Fixes: 8abb95250ae6 ("can: sun4i_can: Add support for the Allwinner D1")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/linux-sunxi/CAMuHMdV2m54UAH0X2dG7stEg=grFihrdsz4+o7=_DpBMhjTbkw@mail.gmail.com/
Signed-off-by: John Watts <contact@jookia.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/all/20230905231342.2042759-2-contact@jookia.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior

[ Upstream commit d9c2ba65e651467de739324d978b04ed8729f483 ]

With patch [1], isotp_poll was updated to also queue the poller in the
so->wait queue, which is used for send state changes. Since the queue
now also contains polling tasks that are not interested in sending, the
queue fill state can no longer be used as an indication of send
readiness. As a consequence, nonblocking writes can lead to a race and
lock-up of the socket if there is a second task polling the socket in
parallel.

With this patch, isotp_sendmsg does not consult wq_has_sleepers but
instead tries to atomically set so->tx.state and waits on so->wait if it
is unable to do so. This behavior is in alignment with isotp_poll, which
also checks so->tx.state to determine send readiness.

V2:
- Revert direct exit to goto err_event_drop

[1] https://lore.kernel.org/all/20230331125511.372783-1-michal.sojka@cvut.cz

Reported-by: Maxime Jayat <maxime.jayat@mobile-devices.fr>
Closes: https://lore.kernel.org/linux-can/11328958-453f-447f-9af8-3b5824dfb041@munic.io/
Signed-off-by: Lukas Magel <lukas.magel@posteo.net>
Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net>
Fixes: 79e19fa79cb5 ("can: isotp: isotp_ops: fix poll() to not report false EPOLLOUT events")
Link: https://github.com/pylessard/python-udsoncan/issues/178#issuecomment-1743786590
Link: https://lore.kernel.org/all/20230827092205.7908-1-lukas.magel@posteo.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: qca8k: fix potential MDIO bus conflict when accessing internal PHYs via management frames

[ Upstream commit 526c8ee04bdbd4d8d19a583b1f3b06700229a815 ]

Besides the QCA8337 switch the Turris 1.x device has on it's MDIO bus
also Micron ethernet PHY (dedicated to the WAN port).

We've been experiencing a strange behavior of the WAN ethernet
interface, wherein the WAN PHY started timing out the MDIO accesses, for
example when the interface was brought down and then back up.

Bisecting led to commit 2cd548566384 ("net: dsa: qca8k: add support for
phy read/write with mgmt Ethernet"), which added support to access the
QCA8337 switch's internal PHYs via management ethernet frames.

Connecting the MDIO bus pins onto an oscilloscope, I was able to see
that the MDIO bus was active whenever a request to read/write an
internal PHY register was done via an management ethernet frame.

My theory is that when the switch core always communicates with the
internal PHYs via the MDIO bus, even when externally we request the
access via ethernet. This MDIO bus is the same one via which the switch
and internal PHYs are accessible to the board, and the board may have
other devices connected on this bus. An ASCII illustration may give more
insight:

           +---------+
      +----|         |
      |    | WAN PHY |
      | +--|         |
      | |  +---------+
      | |
      | |  +----------------------------------+
      | |  | QCA8337                          |
MDC   | |  |                        +-------+ |
------o-+--|--------o------------o--|       | |
MDIO    |  |        |            |  | PHY 1 |-|--to RJ45
--------o--|---o----+---------o--+--|       | |
           |   |    |         |  |  +-------+ |
   | +-------------+  |  o--|       | |
   | | MDIO MDC    |  |  |  | PHY 2 |-|--to RJ45
eth1    | |             |  o--+--|       | |
-----------|-|port0        |  |  |  +-------+ |
           | |             |  |  o--|       | |
   | | switch core |  |  |  | PHY 3 |-|--to RJ45
           | +-------------+  o--+--|       | |
   |                  |  |  +-------+ |
   |                  |  o--|  ...  | |
   +----------------------------------+

When we send a request to read an internal PHY register via an ethernet
management frame via eth1, the switch core receives the ethernet frame
on port 0 and then communicates with the internal PHY via MDIO. At this
time, other potential devices, such as the WAN PHY on Turris 1.x, cannot
use the MDIO bus, since it may cause a bus conflict.

Fix this issue by locking the MDIO bus even when we are accessing the
PHY registers via ethernet management frames.

Fixes: 2cd548566384 ("net: dsa: qca8k: add support for phy read/write with mgmt Ethernet")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: lynx-28g: serialize concurrent phy_set_mode_ext() calls to shared registers

[ Upstream commit 139ad1143151a07be93bf741d4ea7c89e59f89ce ]

The protocol converter configuration registers PCC8, PCCC, PCCD
(implemented by the driver), as well as others, control protocol
converters from multiple lanes (each represented as a different
struct phy). So, if there are simultaneous calls to phy_set_mode_ext()
to lanes sharing the same PCC register (either for the "old" or for the
"new" protocol), corruption of the values programmed to hardware is
possible, because lynx_28g_rmw() has no locking.

Add a spinlock in the struct lynx_28g_priv shared by all lanes, and take
the global spinlock from the phy_ops :: set_mode() implementation. There
are no other callers which modify PCC registers.

Fixes: 8f73b37cf3fb ("phy: add support for the Layerscape SerDes 28G")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: lynx-28g: lock PHY while performing CDR lock workaround

[ Upstream commit 0ac87fe54a171d18c5fb5345e3ee8d14e1b06f4b ]

lynx_28g_cdr_lock_check() runs once per second in a workqueue to reset
the lane receiver if the CDR has not locked onto bit transitions in the
RX stream. But the PHY consumer may do stuff with the PHY simultaneously,
and that isn't okay. Block concurrent generic PHY calls by holding the
PHY mutex from this workqueue.

Fixes: 8f73b37cf3fb ("phy: add support for the Layerscape SerDes 28G")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: lynx-28g: cancel the CDR check work item on the remove path

[ Upstream commit f200bab3756fe81493a1b280180dafa1d9ccdcf7 ]

The blamed commit added the CDR check work item but didn't cancel it on
the remove path. Fix this by adding a remove function which takes care
of it.

Fixes: 8f73b37cf3fb ("phy: add support for the Layerscape SerDes 28G")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dp: Add newlines to debug printks

[ Upstream commit eba8c99a0fc45da1c8d5b5f5bd1dc2e79229a767 ]

These debug printks are missing newlines, causing drm debug logs to be
hard to read. Add newlines so that the messages are on their own line.

Cc: Kuogee Hsieh <quic_khsieh@quicinc.com>
Cc: Vinod Polimera <quic_vpolimer@quicinc.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Fixes: 601f0479c583 ("drm/msm/dp: add logs across DP driver for ease of debugging")
Fixes: cd779808cccd ("drm/msm/dp: Add basic PSR support for eDP")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/554533/
Link: https://lore.kernel.org/r/20230825230109.2264345-1-swboyd@chromium.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: change _dpu_plane_calc_bw() to use u64 to avoid overflow

[ Upstream commit 95e681ca3b65e4ce3d2537b47672d787b7d30375 ]

_dpu_plane_calc_bw() uses integer variables to calculate the bandwidth
used during plane bandwidth calculations. However for high resolution
displays this overflows easily and leads to below errors

[dpu error]crtc83 failed performance check -7

Promote the intermediate variables to u64 to avoid overflow.

changes in v2:
- change to u64 where actually needed in the math

Fixes: c33b7c0389e1 ("drm/msm/dpu: add support for clk and bw scaling for display")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reported-by: Nia Espera <nespera@igalia.com>
Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/32
Tested-by: Nia Espera <nespera@igalia.com>
Patchwork: https://patchwork.freedesktop.org/patch/556288/
Link: https://lore.kernel.org/r/20230908012616.20654-1-quic_abhinavk@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dsi: fix irq_of_parse_and_map() error checking

[ Upstream commit 6a1d4c7976dd1ee7c9f80bc8e62801ec7b1f2f58 ]

The irq_of_parse_and_map() function returns zero on error.  It
never returns negative error codes.  Fix the check.

Fixes: a689554ba6ed ("drm/msm: Initial add DSI connector support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/557715/
Link: https://lore.kernel.org/r/4f3c5c98-04f7-43f7-900f-5d7482c83eef@moroto.mountain
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dsi: skip the wait for video mode done if not applicable

[ Upstream commit ab483e3adcc178254eb1ce0fbdfbea65f86f1006 ]

dsi_wait4video_done() API waits for the DSI video mode engine to
become idle so that we can transmit the DCS commands in the
beginning of BLLP. However, with the current sequence, the MDP
timing engine is turned on after the panel's pre_enable() callback
which can send out the DCS commands needed to power up the panel.

During those cases, this API will always timeout and print out the
error spam leading to long bootup times and log flooding.

Fix this by checking if the DSI video engine was actually busy before
waiting for it to become idle otherwise this is a redundant wait.

changes in v2:
- move the reg read below the video mode check
- minor fixes in commit text

Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/34
Fixes: a689554ba6ed ("drm/msm: Initial add DSI connector support")
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/557853/
Link: https://lore.kernel.org/r/20230915204426.19011-1-quic_abhinavk@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dp: do not reinitialize phy unless retry during link training

[ Upstream commit 0c1a2e69bcb506f48ebf94bd199bab0b93f66da2 ]

DP PHY re-initialization done using dp_ctrl_reinitialize_mainlink() will
cause PLL unlocked initially and then PLL gets locked at the end of
initialization. PLL_UNLOCKED interrupt will fire during this time if the
interrupt mask is enabled.

However currently DP driver link training implementation incorrectly
re-initializes PHY unconditionally during link training as the PHY was
already configured in dp_ctrl_enable_mainlink_clocks().

Fix this by re-initializing the PHY only if the previous link training
failed.

[drm:dp_aux_isr] *ERROR* Unexpected DP AUX IRQ 0x01000000 when not busy

Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/30
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/551847/
Link: https://lore.kernel.org/r/1691533190-19335-1-git-send-email-quic_khsieh@quicinc.com
[quic_abhinavk@quicinc.com: added line break in commit text]
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: nuvoton: wpcm450: fix out of bounds write

[ Upstream commit 87d315a34133edcb29c4cadbf196ec6c30dfd47b ]

Write into 'pctrl->gpio_bank' happens before the check for GPIO index
validity, so out of bounds write may happen.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: a1d1e0e3d80a ("pinctrl: nuvoton: Add driver for WPCM450")
Signed-off-by: Mikhail Kobuk <m.kobuk@ispras.ru>
Reviewed-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20230825101532.6624-1-m.kobuk@ispras.ru
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/realtek - ALC287 merge RTK codec with CS CS35L41 AMP

[ Upstream commit d93eeca627db512a56145285dc94feac5b88a1d4 ]

This is merge model ALC287_FIXUP_THINKPAD_I2S_SPK and
ALC287_FIXUP_CS35L41_I2C_2_THINKPAD_ACPI.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Fixes: f7b069cf0881 ("ALSA: hda/realtek: Fix generic fixup definition for cs35l41 amp")
Link: https://lore.kernel.org/r/82a45234327c4c50b4988a27e9f64c37@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/realtek - ALC287 I2S speaker platform support

[ Upstream commit e43252db7e207a2e194e6a4883a43a31a776a968 ]

0x17 was only speaker pin, DAC assigned will be 0x03. Headphone
assigned to 0x02.
Playback via headphone will get EQ filter processing. So,it needs to
swap DAC.

Tested-by: Mark Pearson <mpearson@lenovo.com>
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/4e4cfa1b3b4c46838aecafc6e8b6f876@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stable-dep-of: d93eeca627db ("ALSA: hda/realtek - ALC287 merge RTK codec with CS CS35L41 AMP")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/realtek: Add quirk for mute LEDs on HP ENVY x360 15-eu0xxx

[ Upstream commit c99c26b16c1544534ebd6a5f27a034f3e44d2597 ]

The LED for the mic mute button is controlled by GPIO2.
The mute button LED is slightly more complex, it's controlled by two bits
in coeff 0x0b.

Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/2693091.mvXUDI8C0e@fabians-envy
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stable-dep-of: d93eeca627db ("ALSA: hda/realtek - ALC287 merge RTK codec with CS CS35L41 AMP")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/realtek: Add quirk for HP Victus 16-d1xxx to enable mute LED

[ Upstream commit 93dc18e11b1ab2d485b69f91c973e6b83e47ebd0 ]

This quirk enables mute LED on HP Victus 16-d1xxx (8A25) laptops, which
use ALC245 codec.

Signed-off-by: SungHwan Jung <onenowy@gmail.com>
Link: https://lore.kernel.org/r/20230823114051.3921-1-onenowy@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stable-dep-of: d93eeca627db ("ALSA: hda/realtek - ALC287 merge RTK codec with CS CS35L41 AMP")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: fsl_sai: Don't disable bitclock for i.MX8MP

[ Upstream commit 197c53c8ecb34f2cd5922f4bdcffa8f701a134eb ]

On i.MX8MP, the BCE and TERE bit are binding with mclk
enablement, if BCE and TERE are cleared the MCLK also be
disabled on output pin, that cause the external codec (wm8960)
in wrong state.

Codec (wm8960) is using the mclk to generate PLL clock,
if mclk is disabled before disabling PLL, the codec (wm8960)
won't generate bclk and frameclk when sysclk switch to
MCLK source in next test case.

The test case:
$aplay -r44100 test1.wav (PLL source)
$aplay -r48000 test2.wav (MCLK source)
aplay: pcm_write:2127: write error: Input/output error

Fixes: 269f399dc19f ("ASoC: fsl_sai: Disable bit clock with transmitter")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1695116533-23287-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: fsl_sai: MCLK bind with TX/RX enable bit

[ Upstream commit 3e4a826129980fed0e3e746a7822f2f204dfc24a ]

On i.MX8MP, the sai MCLK is bound with TX/RX enable bit,
which means the TX/RE enable bit need to be enabled then
MCLK can be output on PAD.

Some codec (for example: WM8962) needs the MCLK output
earlier, otherwise there will be issue for codec
configuration.

Add new soc data "mclk_with_tere" for this platform and
enable the MCLK output in startup stage.

As "mclk_with_tere" only applied to i.MX8MP, currently
The soc data is shared with i.MX8MN, so need to add
an i.MX8MN own soc data with "mclk_with_tere" disabled.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com
Link: https://lore.kernel.org/r/1683273322-2525-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org
Stable-dep-of: 197c53c8ecb3 ("ASoC: fsl_sai: Don't disable bitclock for i.MX8MP")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Use of_property_read_bool() for boolean properties

[ Upstream commit 2d2998b84330899bf88a0414f3356869be4a69eb ]

It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to to of_property_read_bool().

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230310144733.1546413-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 197c53c8ecb3 ("ASoC: fsl_sai: Don't disable bitclock for i.MX8MP")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: soc-acpi: Add entry for sof_es8336 in MTL match table.

commit 381ddcd5875e496f2eae06bb65853271b7150fee upstream.

Adding support for ES83x6 codec in MTL match table.

Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230919091136.1922253-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: Intel: sof_sdw: add support for SKU 0B14

commit fb0b8d299781be8d46b3612aa96cef28da0d93f4 upstream.

One more missing SKU in the list.

Closes: https://github.com/thesofproject/linux/issues/4543
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230919092125.1922468-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: Intel: soc-acpi: Add entry for HDMI_In capture support in MTL match table

commit d1f67278d4b2de3bf544ea9bcd9f64d03584df87 upstream.

Adding HDMI-In capture via I2S feature support in MTL platform.

Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230919091136.1922253-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: simple-card-utils: fixup simple_util_startup() error handling

commit 69cf63b6560205a390a736b88d112374655adb28 upstream.

It should use "goto" instead of "return"

Fixes: 5ca2ab459817 ("ASoC: simple-card-utils: Add new system-clock-fixed flag")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/202309141205.ITZeDJxV-lkp@intel.com/
Closes: https://lore.kernel.org/all/202309151840.au9Aa2W4-lkp@intel.com/
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v8c76jnz.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: SOF: amd: fix for firmware reload failure after playback

commit 7e1fe5d9e7eae67e218f878195d1d348d01f9af7 upstream.

Setting ACP ACLK as clock source when ACP enters D0 state causing
firmware load failure as mentioned in below scenario.

- Load snd_sof_amd_rembrandt
- Play or Record audio
- Stop audio
- Unload snd_sof_amd_rembrandt
- Reload snd_sof_amd_rembrandt

If acp_clkmux_sel register field is set, then clock source will be
set to ACP ACLK when ACP enters D0 state.

During stream stop, if there is no active stream is running then
acp firmware will set the ACP ACLK value to zero.

When driver is reloaded and clock source is selected as ACP ACLK,
as ACP ACLK is programmed to zero, firmware loading will fail.

For RMB platform, remove the clock mux selection field so that
ACP will use internal clock source when ACP enters D0 state.

Fixes: 41cb85bc4b52 ("ASoC: SOF: amd: Add support for Rembrandt plaform.")
Reported-by: coolstar <coolstarorganization@gmail.com>
Closes: https://github.com/thesofproject/sof/issues/8137
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230927071412.2416250-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Change model for Intel RVP board

commit ccbd88be057a38531f835e8a04948ebf80cb0c5d upstream.

Intel RVP board (0x12cc) has Headset Mic issue for reboot.
If system plugged headset when system reboot the headset Mic was gone.

Fixes: 1a93f10c5b12 ("ALSA: hda/realtek: Add "Intel Reference board" and "NUC 13" SSID in the ALC256")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/28112f54c0c6496f97ac845645bc0256@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Fix microphone sound on Nexigo webcam.

commit 4a63e68a295187ae3c1cb3fa0c583c96a959714f upstream.

I own an external usb Webcam, model NexiGo N930AF, which had low mic volume and
inconsistent sound quality. Video works as expected.

(snip)
[  +0.047857] usb 5-1: new high-speed USB device number 2 using xhci_hcd
[  +0.003406] usb 5-1: New USB device found, idVendor=1bcf, idProduct=2283, bcdDevice=12.17
[  +0.000007] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  +0.000004] usb 5-1: Product: NexiGo N930AF FHD Webcam
[  +0.000003] usb 5-1: Manufacturer: SHENZHEN AONI ELECTRONIC CO., LTD
[  +0.000004] usb 5-1: SerialNumber: 20201217011
[  +0.003900] usb 5-1: Found UVC 1.00 device NexiGo N930AF FHD Webcam (1bcf:2283)
[  +0.025726] usb 5-1: 3:1: cannot get usb sound sample rate freq at ep 0x86
[  +0.071482] usb 5-1: 3:2: cannot get usb sound sample rate freq at ep 0x86
[  +0.004679] usb 5-1: 3:3: cannot get usb sound sample rate freq at ep 0x86
[  +0.051607] usb 5-1: Warning! Unlikely big volume range (=4096), cval->res is probably wrong.
[  +0.000005] usb 5-1: [7] FU [Mic Capture Volume] ch = 1, val = 0/4096/1

Set up quirk cval->res to 16 for 256 levels,
Set GET_SAMPLE_RATE quirk flag to stop trying to get the sample rate.
Confirmed that happened anyway later due to the backoff mechanism, after 3 failures

All audio stream on device interfaces share the same values,
apart from wMaxPacketSize and tSamFreq :

(snip)
Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        3
      bAlternateSetting       3
      bNumEndpoints           1
      bInterfaceClass         1 Audio
      bInterfaceSubClass      2 Streaming
      bInterfaceProtocol      0
      iInterface              0
      AudioStreaming Interface Descriptor:
        bLength                 7
        bDescriptorType        36
        bDescriptorSubtype      1 (AS_GENERAL)
        bTerminalLink           8
        bDelay                  1 frames
        wFormatTag         0x0001 PCM
      AudioStreaming Interface Descriptor:
        bLength                11
        bDescriptorType        36
        bDescriptorSubtype      2 (FORMAT_TYPE)
        bFormatType             1 (FORMAT_TYPE_I)
        bNrChannels             1
        bSubframeSize           2
        bBitResolution         16
        bSamFreqType            1 Discrete
        tSamFreq[ 0]        44100
      Endpoint Descriptor:
        bLength                 9
        bDescriptorType         5
        bEndpointAddress     0x86  EP 6 IN
        bmAttributes            5
          Transfer Type            Isochronous
          Synch Type               Asynchronous
          Usage Type               Data
        wMaxPacketSize     0x005c  1x 92 bytes
        bInterval               4
        bRefresh                0
        bSynchAddress           0
        AudioStreaming Endpoint Descriptor:
          bLength                 7
          bDescriptorType        37
          bDescriptorSubtype      1 (EP_GENERAL)
          bmAttributes         0x01
            Sampling Frequency
          bLockDelayUnits         0 Undefined
          wLockDelay         0x0000
(snip)

Based on the usb data about manufacturer, SPCA2281B3 is the most likely controller IC
Manufacturer does not provide link for datasheet nor detailed specs.
No way to confirm if the firmware supports any other way of getting the sample rate.

Testing patch provides consistent good sound recording quality and volume range.

(snip)
[  +0.045764] usb 5-1: new high-speed USB device number 2 using xhci_hcd
[  +0.106290] usb 5-1: New USB device found, idVendor=1bcf, idProduct=2283, bcdDevice=12.17
[  +0.000006] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  +0.000004] usb 5-1: Product: NexiGo N930AF FHD Webcam
[  +0.000003] usb 5-1: Manufacturer: SHENZHEN AONI ELECTRONIC CO., LTD
[  +0.000004] usb 5-1: SerialNumber: 20201217011
[  +0.043700] usb 5-1: set resolution quirk: cval->res = 16
[  +0.002585] usb 5-1: Found UVC 1.00 device NexiGo N930AF FHD Webcam (1bcf:2283)

Signed-off-by: Christos Skevis <xristos.thes@gmail.com>
Link: https://lore.kernel.org/r/20231006155330.399393-1-xristos.thes@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Fix microphone sound on Opencomm2 Headset

commit 6a83d6f3bb3c329a73e3483651fb77b78bac1878 upstream.

When a Opencomm2 Headset is connected to a Bluetooth USB dongle,
the audio playback functions properly, but the microphone does not work.

In the dmesg logs, there are messages indicating that the init_pitch
function fails when the capture process begins.

The microphone only functions when the ep pitch control is not set.

Toggling the pitch control off bypasses the init_piatch function
and allows the microphone to work.

Signed-off-by: WhaleChang <whalechang@google.com>
Link: https://lore.kernel.org/r/20231006044852.4181022-1-whalechang@google.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KEYS: trusted: Remove redundant static calls usage

commit 01bbafc63b65689cb179ca537971286bc27f3b74 upstream.

Static calls invocations aren't well supported from module __init and
__exit functions. Especially the static call from cleanup_trusted() led
to a crash on x86 kernel with CONFIG_DEBUG_VIRTUAL=y.

However, the usage of static call invocations for trusted_key_init()
and trusted_key_exit() don't add any value from either a performance or
security perspective. Hence switch to use indirect function calls instead.

Note here that although it will fix the current crash report, ultimately
the static call infrastructure should be fixed to either support its
future usage from module __init and __exit functions or not.

Reported-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Link: https://lore.kernel.org/lkml/ZRhKq6e5nF%2F4ZIV1@fedora/#t
Fixes: 5d0682be3189 ("KEYS: trusted: Add generic trusted keys framework")
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqchip: renesas-rzg2l: Fix logic to clear TINT interrupt source

commit 9b8df572ba3f4e544366196820a719a40774433e upstream.

The logic to clear the TINT interrupt source in rzg2l_irqc_irq_disable()
is wrong as the mask is correct only for LSB on the TSSR register.
This issue is found when testing with two TINT interrupt sources. So fix
the logic for all TINTs by using the macro TSSEL_SHIFT() to multiply
tssr_offset with 8.

Fixes: 3fed09559cd8 ("irqchip: Add RZ/G2L IA55 Interrupt Controller driver")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230918122411.237635-2-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Update description for '#interrupt-cells' property

commit cfa1f9db6d6088118ef311c0927c66072665b47e upstream.

Update description for '#interrupt-cells' property to utilize the
RZG2L_{NMI,IRQX} for the first cell defined in the
include/dt-bindings/interrupt-controller/irqc-rzg2l.h file.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fixes: 96fed779d3d4cb3c ("dt-bindings: interrupt-controller: Add Renesas RZ/G2L Interrupt Controller")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220722151155.21100-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: qcom: sm8150: extend the size of the PDC resource

commit cf5716acbfc6190b3f97f4614affdf5991aed7b2 upstream.

Follow the example of other platforms and extend the PDC resource region
to 0x30000, so that the PDC driver can read the PDC_VERSION register.

Fixes: 397ad94668c1 ("arm64: dts: qcom: sm8150: Add pdc interrupt controller node")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230905-topic-sm8x50-upstream-pdc-ver-v4-2-fc633c7df84b@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: prevent address rewrite in kernel_bind()

commit c889a99a21bf124c3db08d09df919f0eccc5ea4c upstream.

Similar to the change in commit 0bdf399342c5("net: Avoid address
overwrite in kernel_connect"), BPF hooks run on bind may rewrite the
address passed to kernel_bind(). This change

1) Makes a copy of the bind address in kernel_bind() to insulate
   callers.
2) Replaces direct calls to sock->ops->bind() in net with kernel_bind()

Link: https://lore.kernel.org/netdev/20230912013332.2048422-1-jrife@google.com/
Fixes: 4fbac77d2d09 ("bpf: Hooks for sys_bind")
Cc: stable@vger.kernel.org
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jordan Rife <jrife@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ata: libata-scsi: Disable scsi device manage_system_start_stop

commit aa3998dbeb3abce63653b7f6d4542e7dcd022590 upstream.

The introduction of a device link to create a consumer/supplier
relationship between the scsi device of an ATA device and the ATA port
of that ATA device fixes the ordering of system suspend and resume
operations. For suspend, the scsi device is suspended first and the ata
port after it. This is fine as this allows the synchronize cache and
START STOP UNIT commands issued by the scsi disk driver to be executed
before the ata port is disabled.

For resume operations, the ata port is resumed first, followed
by the scsi device. This allows having the request queue of the scsi
device to be unfrozen after the ata port resume is scheduled in EH,
thus avoiding to see new requests prematurely issued to the ATA device.
Since libata sets manage_system_start_stop to 1, the scsi disk resume
operation also results in issuing a START STOP UNIT command to the
device being resumed so that the device exits standby power mode.

However, restoring the ATA device to the active power mode must be
synchronized with libata EH processing of the port resume operation to
avoid either 1) seeing the start stop unit command being received too
early when the port is not yet resumed and ready to accept commands, or
after the port resume process issues commands such as IDENTIFY to
revalidate the device. In this last case, the risk is that the device
revalidation fails with timeout errors as the drive is still spun down.

Commit 0a8589055936 ("ata,scsi: do not issue START STOP UNIT on resume")
disabled issuing the START STOP UNIT command to avoid issues with it.
But this is incorrect as transitioning a device to the active power
mode from the standby power mode set on suspend requires a media access
command. The IDENTIFY, READ LOG and SET FEATURES commands executed in
libata EH context triggered by the ata port resume operation may thus
fail.

Fix these synchronization issues is by handling a device power mode
transitions for system suspend and resume directly in libata EH context,
without relying on the scsi disk driver management triggered with the
manage_system_start_stop flag.

To do this, the following libata helper functions are introduced:

1) ata_dev_power_set_standby():

This function issues a STANDBY IMMEDIATE command to transitiom a device
to the standby power mode. For HDDs, this spins down the disks. This
function applies only to ATA and ZAC devices and does nothing otherwise.
This function also does nothing for devices that have the
ATA_FLAG_NO_POWEROFF_SPINDOWN or ATA_FLAG_NO_HIBERNATE_SPINDOWN flag
set.

For suspend, call ata_dev_power_set_standby() in
ata_eh_handle_port_suspend() before the port is disabled and frozen.
ata_eh_unload() is also modified to transition all enabled devices to
the standby power mode when the system is shutdown or devices removed.

2) ata_dev_power_set_active() and

This function applies to ATA or ZAC devices and issues a VERIFY command
for 1 sector at LBA 0 to transition the device to the active power mode.
For HDDs, since this function will complete only once the disk spin up.
Its execution uses the same timeouts as for reset, to give the drive
enough time to complete spinup without triggering a command timeout.

For resume, call ata_dev_power_set_active() in
ata_eh_revalidate_and_attach() after the port has been enabled and
before any other command is issued to the device.

With these changes, the manage_system_start_stop and no_start_on_resume
scsi device flags do not need to be set in ata_scsi_dev_config(). The
flag manage_runtime_start_stop is still set to allow the sd driver to
spinup/spindown a disk through the sd runtime operations.

Fixes: 0a8589055936 ("ata,scsi: do not issue START STOP UNIT on resume")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: amd: yc: Fix non-functional mic on Lenovo 82YM

commit 1948fa64727685ac3f6584755212e2e738b6b051 upstream.

Like the Lenovo 82TL, 82V2, 82QF and 82UG, the 82YM (Yoga 7 14ARP8)
requires an entry in the quirk list to enable the internal microphone.
The latter two received similar fixes in commit 1263cc0f414d
("ASoC: amd: yc: Fix non-functional mic on Lenovo 82QF and 82UG").

Fixes: c008323fe361 ("ASoC: amd: yc: Fix a non-functional mic on Lenovo 82SJ")
Cc: stable@vger.kernel.org
Signed-off-by: Sven Frotscher <sven.frotscher@gmail.com>
Link: https://lore.kernel.org/r/20230927223758.18870-1-sven.frotscher@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

quota: Fix slow quotaoff

commit 869b6ea1609f655a43251bf41757aa44e5350a8f upstream.

Eric has reported that commit dabc8b207566 ("quota: fix dqput() to
follow the guarantees dquot_srcu should provide") heavily increases
runtime of generic/270 xfstest for ext4 in nojournal mode. The reason
for this is that ext4 in nojournal mode leaves dquots dirty until the last
dqput() and thus the cleanup done in quota_release_workfn() has to write
them all. Due to the way quota_release_workfn() is written this results
in synchronize_srcu() call for each dirty dquot which makes the dquot
cleanup when turning quotas off extremely slow.

To be able to avoid synchronize_srcu() for each dirty dquot we need to
rework how we track dquots to be cleaned up. Instead of keeping the last
dquot reference while it is on releasing_dquots list, we drop it right
away and mark the dquot with new DQ_RELEASING_B bit instead. This way we
can we can remove dquot from releasing_dquots list when new reference to
it is acquired and thus there's no need to call synchronize_srcu() each
time we drop dq_list_lock.

References: https://lore.kernel.org/all/ZRytn6CxFK2oECUt@debian-BULLSEYE-live-builder-AMD64
Reported-by: Eric Whitney <enwlinux@gmail.com>
Fixes: dabc8b207566 ("quota: fix dqput() to follow the guarantees dquot_srcu should provide")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: logitech-hidpp: Fix kernel crash on receiver USB disconnect

commit dac501397b9d81e4782232c39f94f4307b137452 upstream.

hidpp_connect_event() has *four* time-of-check vs time-of-use (TOCTOU)
races when it races with itself.

hidpp_connect_event() primarily runs from a workqueue but it also runs
on probe() and if a "device-connected" packet is received by the hw
when the thread running hidpp_connect_event() from probe() is waiting on
the hw, then a second thread running hidpp_connect_event() will be
started from the workqueue.

This opens the following races (note the below code is simplified):

1. Retrieving + printing the protocol (harmless race):

if (!hidpp->protocol_major) {
hidpp_root_get_protocol_version()
hidpp->protocol_major = response.rap.params[0];
}

We can actually see this race hit in the dmesg in the abrt output
attached to rhbz#2227968:

[ 3064.624215] logitech-hidpp-device 0003:046D:4071.0049: HID++ 4.5 device connected.
[ 3064.658184] logitech-hidpp-device 0003:046D:4071.0049: HID++ 4.5 device connected.

Testing with extra logging added has shown that after this the 2 threads
take turn grabbing the hw access mutex (send_mutex) so they ping-pong
through all the other TOCTOU cases managing to hit all of them:

2. Updating the name to the HIDPP name (harmless race):

if (hidpp->name == hdev->name) {
...
hidpp->name = new_name;
}

3. Initializing the power_supply class for the battery (problematic!):

hidpp_initialize_battery()
{
        if (hidpp->battery.ps)
                return 0;

probe_battery(); /* Blocks, threads take turns executing this */

hidpp->battery.desc.properties =
devm_kmemdup(dev, hidpp_battery_props, cnt, GFP_KERNEL);

hidpp->battery.ps =
devm_power_supply_register(&hidpp->hid_dev->dev,
   &hidpp->battery.desc, cfg);
}

4. Creating delayed input_device (potentially problematic):

if (hidpp->delayed_input)
return;

hidpp->delayed_input = hidpp_allocate_input(hdev);

The really big problem here is 3. Hitting the race leads to the following
sequence:

hidpp->battery.desc.properties =
devm_kmemdup(dev, hidpp_battery_props, cnt, GFP_KERNEL);

hidpp->battery.ps =
devm_power_supply_register(&hidpp->hid_dev->dev,
   &hidpp->battery.desc, cfg);

...

hidpp->battery.desc.properties =
devm_kmemdup(dev, hidpp_battery_props, cnt, GFP_KERNEL);

hidpp->battery.ps =
devm_power_supply_register(&hidpp->hid_dev->dev,
   &hidpp->battery.desc, cfg);

So now we have registered 2 power supplies for the same battery,
which looks a bit weird from userspace's pov but this is not even
the really big problem.

Notice how:

1. This is all devm-maganaged
2. The hidpp->battery.desc struct is shared between the 2 power supplies
3. hidpp->battery.desc.properties points to the result from the second
   devm_kmemdup()

This causes a use after free scenario on USB disconnect of the receiver:
1. The last registered power supply class device gets unregistered
2. The memory from the last devm_kmemdup() call gets freed,
   hidpp->battery.desc.properties now points to freed memory
3. The first registered power supply class device gets unregistered,
   this involves sending a remove uevent to userspace which invokes
   power_supply_uevent() to fill the uevent data
4. power_supply_uevent() uses hidpp->battery.desc.properties which
   now points to freed memory leading to backtraces like this one:

Sep 22 20:01:35 eric kernel: BUG: unable to handle page fault for address: ffffb2140e017f08
...
Sep 22 20:01:35 eric kernel: Workqueue: usb_hub_wq hub_event
Sep 22 20:01:35 eric kernel: RIP: 0010:power_supply_uevent+0xee/0x1d0
...
Sep 22 20:01:35 eric kernel:  ? asm_exc_page_fault+0x26/0x30
Sep 22 20:01:35 eric kernel:  ? power_supply_uevent+0xee/0x1d0
Sep 22 20:01:35 eric kernel:  ? power_supply_uevent+0x10d/0x1d0
Sep 22 20:01:35 eric kernel:  dev_uevent+0x10f/0x2d0
Sep 22 20:01:35 eric kernel:  kobject_uevent_env+0x291/0x680
Sep 22 20:01:35 eric kernel:  power_supply_unregister+0x8e/0xa0
Sep 22 20:01:35 eric kernel:  release_nodes+0x3d/0xb0
Sep 22 20:01:35 eric kernel:  devres_release_group+0xfc/0x130
Sep 22 20:01:35 eric kernel:  hid_device_remove+0x56/0xa0
Sep 22 20:01:35 eric kernel:  device_release_driver_internal+0x19f/0x200
Sep 22 20:01:35 eric kernel:  bus_remove_device+0xc6/0x130
Sep 22 20:01:35 eric kernel:  device_del+0x15c/0x3f0
Sep 22 20:01:35 eric kernel:  ? __queue_work+0x1df/0x440
Sep 22 20:01:35 eric kernel:  hid_destroy_device+0x4b/0x60
Sep 22 20:01:35 eric kernel:  logi_dj_remove+0x9a/0x100 [hid_logitech_dj 5c91534a0ead2b65e04dd799a0437e3b99b21bc4]
Sep 22 20:01:35 eric kernel:  hid_device_remove+0x44/0xa0
Sep 22 20:01:35 eric kernel:  device_release_driver_internal+0x19f/0x200
Sep 22 20:01:35 eric kernel:  bus_remove_device+0xc6/0x130
Sep 22 20:01:35 eric kernel:  device_del+0x15c/0x3f0
Sep 22 20:01:35 eric kernel:  ? __queue_work+0x1df/0x440
Sep 22 20:01:35 eric kernel:  hid_destroy_device+0x4b/0x60
Sep 22 20:01:35 eric kernel:  usbhid_disconnect+0x47/0x60 [usbhid 727dcc1c0b94e6b4418727a468398ac3bca492f3]
Sep 22 20:01:35 eric kernel:  usb_unbind_interface+0x90/0x270
Sep 22 20:01:35 eric kernel:  device_release_driver_internal+0x19f/0x200
Sep 22 20:01:35 eric kernel:  bus_remove_device+0xc6/0x130
Sep 22 20:01:35 eric kernel:  device_del+0x15c/0x3f0
Sep 22 20:01:35 eric kernel:  ? kobject_put+0xa0/0x1d0
Sep 22 20:01:35 eric kernel:  usb_disable_device+0xcd/0x1e0
Sep 22 20:01:35 eric kernel:  usb_disconnect+0xde/0x2c0
Sep 22 20:01:35 eric kernel:  usb_disconnect+0xc3/0x2c0
Sep 22 20:01:35 eric kernel:  hub_event+0xe80/0x1c10

There have been quite a few bug reports (see Link tags) about this crash.

Fix all the TOCTOU issues, including the really bad power-supply related
system crash on USB disconnect, by making probe() use the workqueue for
running hidpp_connect_event() too, so that it can never run more then once.

Link: https://bugzilla.redhat.com/show_bug.cgi?id=2227221
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2227968
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2227968
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2242189
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217412#c58
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231005182638.3776-1-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: Do not rescan devices with a suspended queue

commit 626b13f015e080e434b1dee9a0c116ddbf4fb695 upstream.

Commit ff48b37802e5 ("scsi: Do not attempt to rescan suspended devices")
modified scsi_rescan_device() to avoid attempting rescanning a suspended
device. However, the modification added a check to verify that a SCSI
device is in the running state without checking if the device request
queue (in the case of block device) is also running, thus allowing the
exectuion of internal requests. Without checking the device request
queue, commit ff48b37802e5 fix is incomplete and deadlocks on resume can
still happen. Use blk_queue_pm_only() to check if the device request
queue allows executing commands in addition to checking the SCSI device
state.

Reported-by: Petr Tesarik <petr@tesarici.cz>
Fixes: ff48b37802e5 ("scsi: Do not attempt to rescan suspended devices")
Cc: stable@vger.kernel.org
Tested-by: Petr Tesarik <petr@tesarici.cz>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: hp-wmi:: Mark driver struct with __refdata to prevent section mismatch warning

[ Upstream commit 5b44abbc39ca15df80d0da4756078c98c831090f ]

As described in the added code comment, a reference to .exit.text is ok
for drivers registered via module_platform_driver_probe(). Make this
explicit to prevent a section mismatch warning:

WARNING: modpost: drivers/platform/x86/hp/hp-wmi: section mismatch in reference: hp_wmi_driver+0x8 (section: .data) -> hp_wmi_bios_remove (section: .exit.text)

Fixes: c165b80cfecc ("hp-wmi: fix handling of platform device")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231004111624.2667753-1-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: think-lmi: Fix reference leak

[ Upstream commit 528ab3e605cabf2f9c9bd5944d3bfe15f6e94f81 ]

If a duplicate attribute is found using kset_find_obj(), a reference
to that attribute is returned which needs to be disposed accordingly
using kobject_put(). Move the setting name validation into a separate
function to allow for this change without having to duplicate the
cleanup code for this setting.
As a side note, a very similar bug was fixed in
commit 7295a996fdab ("platform/x86: dell-sysman: Fix reference leak"),
so it seems that the bug was copied from that driver.

Compile-tested only.

Fixes: 1bcad8e510b2 ("platform/x86: think-lmi: Fix issues with duplicate attributes")
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230925142819.74525-2-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/arm-cmn: Fix the unhandled overflow status of counter 4 to 7

[ Upstream commit 7f949f6f54ff593123ab95b6247bfa4542a65580 ]

The register por_dt_pmovsr Bits[7:0] indicates overflow from counters 7
to 0. But in arm_cmn_handle_irq(), only handled the overflow status of
Bits[3:0] which results in unhandled overflow status of counters 4 to 7.

So let the overflow status of DTC counters 4 to 7 to be handled.

Fixes: 0ba64770a2f2 ("perf: Add Arm CMN-600 PMU driver")
Signed-off-by: Jing Zhang <renyu.zj@linux.alibaba.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/1695612152-123633-1-git-send-email-renyu.zj@linux.alibaba.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/cxgb4: Check skb value for failure to allocate

[ Upstream commit 8fb8a82086f5bda6893ea6557c5a458e4549c6d7 ]

get_skb() can fail to allocate skb, so check it.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 5be78ee924ae ("RDMA/cxgb4: Fix LE hash collision bug for active open connection")
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Link: https://lore.kernel.org/r/20230905124048.284165-1-artem.chernyshev@red-soft.ru
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915: Don't set PIPE_CONTROL_FLUSH_L3 for aux inval

[ Upstream commit 128c20eda73bd3e78505c574fb17adb46195c98b ]

PIPE_CONTROL_FLUSH_L3 is not needed for aux invalidation
so don't set that.

Fixes: 78a6ccd65fa3 ("drm/i915/gt: Ensure memory quiesced before invalidation")
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.8+
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Cc: Tapani Pälli <tapani.palli@intel.com>
Cc: Mark Janes <mark.janes@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Acked-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Tested-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230926142401.25687-1-nirmoy.das@intel.com
(cherry picked from commit 03d681412b38558aefe4fb0f46e36efa94bb21ef)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mptcp: fix delegated action races

[ Upstream commit a5efdbcece83af94180e8d7c0a6e22947318499d ]

The delegated action infrastructure is prone to the following
race: different CPUs can try to schedule different delegated
actions on the same subflow at the same time.

Each of them will check different bits via mptcp_subflow_delegate(),
and will try to schedule the action on the related per-cpu napi
instance.

Depending on the timing, both can observe an empty delegated list
node, causing the same entry to be added simultaneously on two different
lists.

The root cause is that the delegated actions infra does not provide
a single synchronization point. Address the issue reserving an additional
bit to mark the subflow as scheduled for delegation. Acquiring such bit
guarantee the caller to own the delegated list node, and being able to
safely schedule the subflow.

Clear such bit only when the subflow scheduling is completed, ensuring
proper barrier in place.

Additionally swap the meaning of the delegated_action bitmask, to allow
the usage of the existing helper to set multiple bit at once.

Fixes: bcd97734318d ("mptcp: use delegate action to schedule 3rd ack retrans")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231004-send-net-20231004-v1-1-28de4ac663ae@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: mana: Fix TX CQE error handling

[ Upstream commit b2b000069a4c307b09548dc2243f31f3ca0eac9c ]

For an unknown TX CQE error type (probably from a newer hardware),
still free the SKB, update the queue tail, etc., otherwise the
accounting will be wrong.

Also, TX errors can be triggered by injecting corrupted packets, so
replace the WARN_ONCE to ratelimited error logging.

Cc: stable@vger.kernel.org
Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 6.1.58

Link: https://lore.kernel.org/r/20231012180030.112560642@linuxfoundation.org
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Ricardo B. Marliere <ricardo@marliere.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lib/test_meminit: fix off-by-one error in test_pages()

commit efb78fa86e95 ("lib/test_meminit: allocate pages up to order
MAX_ORDER") works great in kernels 6.4 and newer thanks to commit
23baf831a32c ("mm, treewide: redefine MAX_ORDER sanely"), but for older
kernels, the loop is off by one, which causes crashes when the test
runs.

Fix this up by changing "<= MAX_ORDER" "< MAX_ORDER" to allow the test
to work properly for older kernel branches.

Fixes: 421855d0d24d ("lib/test_meminit: allocate pages up to order MAX_ORDER")
Cc: Andrew Donnellan <ajd@linux.ibm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Xiaoke Wang <xkernel.wang@foxmail.com>
Cc: <stable@vger.kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "NFS: Fix error handling for O_DIRECT write scheduling"

This reverts commit f16fd0b11f0f4d41846b5102b1656ea1fc9ac7a0 which is
commit 954998b60caa8f2a3bf3abe490de6f08d283687a upstream.

There are reported NFS problems in the 6.1.56 release, so revert a set
of NFS patches to hopefully resolve the issue.

Reported-by: poester <poester@internetbrands.com>
Link: https://lore.kernel.org/r/20231012165439.137237-2-kernel@linuxace.com
Reported-by: Daniel Díaz <daniel.diaz@linaro.org>
Link: https://lore.kernel.org/r/2023100755-livestock-barcode-fe41@gregkh
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "NFS: Fix O_DIRECT locking issues"

This reverts commit 4d98038e5bd939bd13cc4e602dfe60cd5110efa8 which is
commit 7c6339322ce0c6128acbe36aacc1eeb986dd7bf1 upstream.

There are reported NFS problems in the 6.1.56 release, so revert a set
of NFS patches to hopefully resolve the issue.

Reported-by: poester <poester@internetbrands.com>
Link: https://lore.kernel.org/r/20231012165439.137237-2-kernel@linuxace.com
Reported-by: Daniel Díaz <daniel.diaz@linaro.org>
Link: https://lore.kernel.org/r/2023100755-livestock-barcode-fe41@gregkh
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "NFS: More O_DIRECT accounting fixes for error paths"

This reverts commit 1f49386d67792424028acfe781d466b010f8fa3f which is
commit 8982f7aff39fb526aba4441fff2525fcedd5e1a3 upstream.

There are reported NFS problems in the 6.1.56 release, so revert a set
of NFS patches to hopefully resolve the issue.

Reported-by: poester <poester@internetbrands.com>
Link: https://lore.kernel.org/r/20231012165439.137237-2-kernel@linuxace.com
Reported-by: Daniel Díaz <daniel.diaz@linaro.org>
Link: https://lore.kernel.org/r/2023100755-livestock-barcode-fe41@gregkh
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "NFS: Use the correct commit info in nfs_join_page_group()"

This reverts commit d4729af1c73cfacb64facda3d196e25940f0e7a5 which is
commit b193a78ddb5ee7dba074d3f28dc050069ba083c0 upstream.

There are reported NFS problems in the 6.1.56 release, so revert a set
of NFS patches to hopefully resolve the issue.

Reported-by: poester <poester@internetbrands.com>
Link: https://lore.kernel.org/r/20231012165439.137237-2-kernel@linuxace.com
Reported-by: Daniel Díaz <daniel.diaz@linaro.org>
Link: https://lore.kernel.org/r/2023100755-livestock-barcode-fe41@gregkh
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "NFS: More fixes for nfs_direct_write_reschedule_io()"

This reverts commit edd1f06145101dab83497806bb6162641255ef50 which is
commit b11243f720ee5f9376861099019c8542969b6318 upstream.

There are reported NFS problems in the 6.1.56 release, so revert a set
of NFS patches to hopefully resolve the issue.

Reported-by: poester <poester@internetbrands.com>
Link: https://lore.kernel.org/r/20231012165439.137237-2-kernel@linuxace.com
Reported-by: Daniel Díaz <daniel.diaz@linaro.org>
Link: https://lore.kernel.org/r/2023100755-livestock-barcode-fe41@gregkh
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 6.1.57

Link: https://lore.kernel.org/r/20231009130122.946357448@linuxfoundation.org
Tested-by: SeongJae Park <sj@kernel.org>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/events: replace evtchn_rwlock with RCU

commit 87797fad6cce28ec9be3c13f031776ff4f104cfc upstream.

In unprivileged Xen guests event handling can cause a deadlock with
Xen console handling. The evtchn_rwlock and the hvc_lock are taken in
opposite sequence in __hvc_poll() and in Xen console IRQ handling.
Normally this is no problem, as the evtchn_rwlock is taken as a reader
in both paths, but as soon as an event channel is being closed, the
lock will be taken as a writer, which will cause read_lock() to block:

CPU0                     CPU1                CPU2
(IRQ handling)           (__hvc_poll())      (closing event channel)

read_lock(evtchn_rwlock)
                         spin_lock(hvc_lock)
                                             write_lock(evtchn_rwlock)
                                                 [blocks]
spin_lock(hvc_lock)
    [blocks]
                        read_lock(evtchn_rwlock)
                            [blocks due to writer waiting,
                             and not in_interrupt()]

This issue can be avoided by replacing evtchn_rwlock with RCU in
xen_free_irq(). Note that RCU is used only to delay freeing of the
irq_info memory. There is no RCU based dereferencing or replacement of
pointers involved.

In order to avoid potential races between removing the irq_info
reference and handling of interrupts, set the irq_info pointer to NULL
only when freeing its memory. The IRQ itself must be freed at that
time, too, as otherwise the same IRQ number could be allocated again
before handling of the old instance would have been finished.

This is XSA-441 / CVE-2023-34324.

Fixes: 54c9de89895e ("xen/events: add a new "late EOI" evtchn framework")
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: remove one read_lock()/read_unlock() pair in rt6_check_neigh()

commit c486640aa710ddd06c13a7f7162126e1552e8842 upstream.

rt6_check_neigh() uses read_lock() to protect n->nud_state reading.

This seems overkill and causes false sharing.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: file_remove_privs needs an exclusive lock in direct io write

commit 9af86694fd5d387992699ec99007ed374966ce9a upstream.

This was noticed by Miklos that file_remove_privs might call into
notify_change(), which requires to hold an exclusive lock. The problem
exists in FUSE and btrfs. We can fix it without any additional helpers
from VFS, in case the privileges would need to be dropped, change the
lock type to be exclusive and redo the loop.

Fixes: e9adabb9712e ("btrfs: use shared lock for direct writes within EOF")
CC: Miklos Szeredi <miklos@szeredi.hu>
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netlink: remove the flex array from struct nlmsghdr

commit c73a72f4cbb47672c8cc7f7d7aba52f1cb15baca upstream.

I've added a flex array to struct nlmsghdr in
commit 738136a0e375 ("netlink: split up copies in the ack construction")
to allow accessing the data easily. It leads to warnings with clang,
if user space wraps this structure into another struct and the flex
array is not at the end of the container.

Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/all/20221114023927.GA685@u2004-local/
Link: https://lore.kernel.org/r/20221118033903.1651026-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix fscrypt name leak after failure to join log transaction

commit fee4c19937439693f2420a916169d08e88576e8e upstream.

When logging a new name, we don't expect to fail joining a log transaction
since we know at least one of the inodes was logged before in the current
transaction. However if we fail for some unexpected reason, we end up not
freeing the fscrypt name we previously allocated. So fix that by freeing
the name in case we failed to join a log transaction.

Fixes: ab3c5c18e8fa ("btrfs: setup qstr from dentrys using fscrypt helper")
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix an error handling path in btrfs_rename()

commit abe3bf7425fb695a9b37394af18b9ea58a800802 upstream.

If new_whiteout_inode() fails, some resources need to be freed.
Add the missing goto to the error handling path.

Fixes: ab3c5c18e8fa ("btrfs: setup qstr from dentrys using fscrypt helper")
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vrf: Fix lockdep splat in output path

commit 2033ab90380d46e0e9f0520fd6776a73d107fd95 upstream.

Cited commit converted the neighbour code to use the standard RCU
variant instead of the RCU-bh variant, but the VRF code still uses
rcu_read_lock_bh() / rcu_read_unlock_bh() around the neighbour lookup
code in its IPv4 and IPv6 output paths, resulting in lockdep splats
[1][2]. Can be reproduced using [3].

Fix by switching to rcu_read_lock() / rcu_read_unlock().

[1]
=============================
WARNING: suspicious RCU usage
6.5.0-rc1-custom-g9c099e6dbf98 #403 Not tainted
-----------------------------
include/net/neighbour.h:302 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
2 locks held by ping/183:
 #0: ffff888105ea1d80 (sk_lock-AF_INET){+.+.}-{0:0}, at: raw_sendmsg+0xc6c/0x33c0
 #1: ffffffff85b46820 (rcu_read_lock_bh){....}-{1:2}, at: vrf_output+0x2e3/0x2030

stack backtrace:
CPU: 0 PID: 183 Comm: ping Not tainted 6.5.0-rc1-custom-g9c099e6dbf98 #403
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014
Call Trace:
 <TASK>
 dump_stack_lvl+0xc1/0xf0
 lockdep_rcu_suspicious+0x211/0x3b0
 vrf_output+0x1380/0x2030
 ip_push_pending_frames+0x125/0x2a0
 raw_sendmsg+0x200d/0x33c0
 inet_sendmsg+0xa2/0xe0
 __sys_sendto+0x2aa/0x420
 __x64_sys_sendto+0xe5/0x1c0
 do_syscall_64+0x38/0x80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

[2]
=============================
WARNING: suspicious RCU usage
6.5.0-rc1-custom-g9c099e6dbf98 #403 Not tainted
-----------------------------
include/net/neighbour.h:302 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
2 locks held by ping6/182:
 #0: ffff888114b63000 (sk_lock-AF_INET6){+.+.}-{0:0}, at: rawv6_sendmsg+0x1602/0x3e50
 #1: ffffffff85b46820 (rcu_read_lock_bh){....}-{1:2}, at: vrf_output6+0xe9/0x1310

stack backtrace:
CPU: 0 PID: 182 Comm: ping6 Not tainted 6.5.0-rc1-custom-g9c099e6dbf98 #403
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014
Call Trace:
 <TASK>
 dump_stack_lvl+0xc1/0xf0
 lockdep_rcu_suspicious+0x211/0x3b0
 vrf_output6+0xd32/0x1310
 ip6_local_out+0xb4/0x1a0
 ip6_send_skb+0xbc/0x340
 ip6_push_pending_frames+0xe5/0x110
 rawv6_sendmsg+0x2e6e/0x3e50
 inet_sendmsg+0xa2/0xe0
 __sys_sendto+0x2aa/0x420
 __x64_sys_sendto+0xe5/0x1c0
 do_syscall_64+0x38/0x80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

[3]
#!/bin/bash

ip link add name vrf-red up numtxqueues 2 type vrf table 10
ip link add name swp1 up master vrf-red type dummy
ip address add 192.0.2.1/24 dev swp1
ip address add 2001:db8:1::1/64 dev swp1
ip neigh add 192.0.2.2 lladdr 00:11:22:33:44:55 nud perm dev swp1
ip neigh add 2001:db8:1::2 lladdr 00:11:22:33:44:55 nud perm dev swp1
ip vrf exec vrf-red ping 192.0.2.2 -c 1 &> /dev/null
ip vrf exec vrf-red ping6 2001:db8:1::2 -c 1 &> /dev/null

Fixes: 09eed1192cec ("neighbour: switch to standard rcu, instead of rcu_bh")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: https://lore.kernel.org/netdev/CA+G9fYtEr-=GbcXNDYo3XOkwR+uYgehVoDjsP0pFLUpZ_AZcyg@mail.gmail.com/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230715153605.4068066-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: remove nexthop_fib6_nh_bh()

commit ef1148d4487438a3408d6face2a8360d91b4af70 upstream.

After blamed commit, nexthop_fib6_nh_bh() and nexthop_fib6_nh()
are the same.

Delete nexthop_fib6_nh_bh(), and convert /proc/net/ipv6_route
to standard rcu to avoid this splat:

[ 5723.180080] WARNING: suspicious RCU usage
[ 5723.180083] -----------------------------
[ 5723.180084] include/net/nexthop.h:516 suspicious rcu_dereference_check() usage!
[ 5723.180086]
other info that might help us debug this:

[ 5723.180087]
rcu_scheduler_active = 2, debug_locks = 1
[ 5723.180089] 2 locks held by cat/55856:
[ 5723.180091] #0: ffff9440a582afa8 (&p->lock){+.+.}-{3:3}, at: seq_read_iter (fs/seq_file.c:188)
[ 5723.180100] #1: ffffffffaac07040 (rcu_read_lock_bh){....}-{1:2}, at: rcu_lock_acquire (include/linux/rcupdate.h:326)
[ 5723.180109]
stack backtrace:
[ 5723.180111] CPU: 14 PID: 55856 Comm: cat Tainted: G S        I        6.3.0-dbx-DEV #528
[ 5723.180115] Call Trace:
[ 5723.180117]  <TASK>
[ 5723.180119] dump_stack_lvl (lib/dump_stack.c:107)
[ 5723.180124] dump_stack (lib/dump_stack.c:114)
[ 5723.180126] lockdep_rcu_suspicious (include/linux/context_tracking.h:122)
[ 5723.180132] ipv6_route_seq_show (include/net/nexthop.h:?)
[ 5723.180135] ? ipv6_route_seq_next (net/ipv6/ip6_fib.c:2605)
[ 5723.180140] seq_read_iter (fs/seq_file.c:272)
[ 5723.180145] seq_read (fs/seq_file.c:163)
[ 5723.180151] proc_reg_read (fs/proc/inode.c:316 fs/proc/inode.c:328)
[ 5723.180155] vfs_read (fs/read_write.c:468)
[ 5723.180160] ? up_read (kernel/locking/rwsem.c:1617)
[ 5723.180164] ksys_read (fs/read_write.c:613)
[ 5723.180168] __x64_sys_read (fs/read_write.c:621)
[ 5723.180170] do_syscall_64 (arch/x86/entry/common.c:?)
[ 5723.180174] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
[ 5723.180177] RIP: 0033:0x7fa455677d2a

Fixes: 09eed1192cec ("neighbour: switch to standard rcu, instead of rcu_bh")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230510154646.370659-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Restore __ldcw_align for PA-RISC 2.0 processors

commit 914988e099fc658436fbd7b8f240160c352b6552 upstream.

Back in 2005, Kyle McMartin removed the 16-byte alignment for
ldcw semaphores on PA 2.0 machines (CONFIG_PA20). This broke
spinlocks on pre PA8800 processors. The main symptom was random
faults in mmap'd memory (e.g., gcc compilations, etc).

Unfortunately, the errata for this ldcw change is lost.

The issue is the 16-byte alignment required for ldcw semaphore
instructions can only be reduced to natural alignment when the
ldcw operation can be handled coherently in cache. Only PA8800
and PA8900 processors actually support doing the operation in
cache.

Aligning the spinlock dynamically adds two integer instructions
to each spinlock.

Tested on rp3440, c8000 and a500.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Link: https://lore.kernel.org/linux-parisc/6b332788-2227-127f-ba6d-55e99ecf4ed8@bell.net/T/#t
Link: https://lore.kernel.org/linux-parisc/20050609050702.GB4641@roadwarrior.mcmartin.ca/
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: fix uaf in smb20_oplock_break_ack

commit c69813471a1ec081a0b9bf0c6bd7e8afd818afce upstream.

drop reference after use opinfo.

Signed-off-by: luosili <rootlab@huawei.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: fix race condition between session lookup and expire

commit 53ff5cf89142b978b1a5ca8dc4d4425e6a09745f upstream.

 Thread A                        +  Thread B
 ksmbd_session_lookup            |  smb2_sess_setup
   sess = xa_load                |
                                 |
                                 |    xa_erase(&conn->sessions, sess->id);
                                 |
                                 |    ksmbd_session_destroy(sess) --> kfree(sess)
                                 |
   // UAF!                       |
   sess->last_active = jiffies   |
                                 +

This patch add rwsem to fix race condition between ksmbd_session_lookup
and ksmbd_expire_session.

Reported-by: luosili <rootlab@huawei.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/sev: Use the GHCB protocol when available for SNP CPUID requests

commit 6bc6f7d9d7ac3cdbe9e8b0495538b4a0cc11f032 upstream.

SNP retrieves the majority of CPUID information from the SNP CPUID page.
But there are times when that information needs to be supplemented by the
hypervisor, for example, obtaining the initial APIC ID of the vCPU from
leaf 1.

The current implementation uses the MSR protocol to retrieve the data from
the hypervisor, even when a GHCB exists. The problem arises when an NMI
arrives on return from the VMGEXIT. The NMI will be immediately serviced
and may generate a #VC requiring communication with the hypervisor.

Since a GHCB exists in this case, it will be used. As part of using the
GHCB, the #VC handler will write the GHCB physical address into the GHCB
MSR and the #VC will be handled.

When the NMI completes, processing resumes at the site of the VMGEXIT
which is expecting to read the GHCB MSR and find a CPUID MSR protocol
response. Since the NMI handling overwrote the GHCB MSR response, the
guest will see an invalid reply from the hypervisor and self-terminate.

Fix this problem by using the GHCB when it is available. Any NMI
received is properly handled because the GHCB contents are copied into
a backup page and restored on NMI exit, thus preserving the active GHCB
request or result.

  [ bp: Touchups. ]

Fixes: ee0bfa08a345 ("x86/compressed/64: Add support for SEV-SNP CPUID table in #VC handlers")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/a5856fa1ebe3879de91a8f6298b6bbd901c61881.1690578565.git.thomas.lendacky@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/mlx5: Fix NULL string error

commit dab994bcc609a172bfdab15a0d4cb7e50e8b5458 upstream.

checkpath is complaining about NULL string, change it to 'Unknown'.

Fixes: 37aa5c36aa70 ("IB/mlx5: Add UARs write-combining and non-cached mapping")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Link: https://lore.kernel.org/r/8638e5c14fadbde5fa9961874feae917073af920.1695203958.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/mlx5: Fix mutex unlocking on error flow for steering anchor creation

commit 2fad8f06a582cd431d398a0b3f9be21d069603ab upstream.

The mutex was not unlocked on some of the error flows.
Moved the unlock location to include all the error flow scenarios.

Fixes: e1f4a52ac171 ("RDMA/mlx5: Create an indirect flow table for steering anchor")
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Hamdan Igbaria <hamdani@nvidia.com>
Link: https://lore.kernel.org/r/1244a69d783da997c0af0b827c622eb00495492e.1695203958.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/siw: Fix connection failure handling

commit 53a3f777049771496f791504e7dc8ef017cba590 upstream.

In case immediate MPA request processing fails, the newly
created endpoint unlinks the listening endpoint and is
ready to be dropped. This special case was not handled
correctly by the code handling the later TCP socket close,
causing a NULL dereference crash in siw_cm_work_handler()
when dereferencing a NULL listener. We now also cancel
the useless MPA timeout, if immediate MPA request
processing fails.

This patch furthermore simplifies MPA processing in general:
Scheduling a useless TCP socket read in sk_data_ready() upcall
is now surpressed, if the socket is already moved out of
TCP_ESTABLISHED state.

Fixes: 6c52fdc244b5 ("rdma/siw: connection management")
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://lore.kernel.org/r/20230905145822.446263-1-bmt@zurich.ibm.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/srp: Do not call scsi_done() from srp_abort()

commit e193b7955dfad68035b983a0011f4ef3590c85eb upstream.

After scmd_eh_abort_handler() has called the SCSI LLD eh_abort_handler
callback, it performs one of the following actions:
* Call scsi_queue_insert().
* Call scsi_finish_command().
* Call scsi_eh_scmd_add().
Hence, SCSI abort handlers must not call scsi_done(). Otherwise all
the above actions would trigger a use-after-free. Hence remove the
scsi_done() call from srp_abort(). Keep the srp_free_req() call
before returning SUCCESS because we may not see the command again if
SUCCESS is returned.

Cc: Bob Pearson <rpearsonhpe@gmail.com>
Cc: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: d8536670916a ("IB/srp: Avoid having aborted requests hang")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230823205727.505681-1-bvanassche@acm.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/uverbs: Fix typo of sizeof argument

commit c489800e0d48097fc6afebd862c6afa039110a36 upstream.

Since size of 'hdr' pointer and '*hdr' structure is equal on 64-bit
machines issue probably didn't cause any wrong behavior. But anyway,
fixing of typo is required.

Fixes: da0f60df7bd5 ("RDMA/uverbs: Prohibit write() calls with too small buffers")
Co-developed-by: Ivanov Mikhail <ivanov.mikhail1@huawei-partners.com>
Signed-off-by: Ivanov Mikhail <ivanov.mikhail1@huawei-partners.com>
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Link: https://lore.kernel.org/r/20230905103258.1738246-1-konstantin.meskhidze@huawei.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/cma: Fix truncation compilation warning in make_cma_ports

commit 18126c767658ae8a831257c6cb7776c5ba5e7249 upstream.

The following compilation error is false alarm as RDMA devices don't
have such large amount of ports to actually cause to format truncation.

drivers/infiniband/core/cma_configfs.c: In function ‘make_cma_ports’:
drivers/infiniband/core/cma_configfs.c:223:57: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
  223 |                 snprintf(port_str, sizeof(port_str), "%u", i + 1);
      |                                                         ^
drivers/infiniband/core/cma_configfs.c:223:17: note: ‘snprintf’ output between 2 and 11 bytes into a destination of size 10
  223 |                 snprintf(port_str, sizeof(port_str), "%u", i + 1);
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make[5]: *** [scripts/Makefile.build:243: drivers/infiniband/core/cma_configfs.o] Error 1

Fixes: 045959db65c6 ("IB/cma: Add configfs for rdma_cm")
Link: https://lore.kernel.org/r/a7e3b347ee134167fa6a3787c56ef231a04bc8c2.1694434639.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/cma: Initialize ib_sa_multicast structure to 0 when join

commit e0fe97efdb00f0f32b038a4836406a82886aec9c upstream.

Initialize the structure to 0 so that it's fields won't have random
values. For example fields like rec.traffic_class (as well as
rec.flow_label and rec.sl) is used to generate the user AH through:
  cma_iboe_join_multicast
    cma_make_mc_event
      ib_init_ah_from_mcmember

And a random traffic_class causes a random IP DSCP in RoCEv2.

Fixes: b5de0c60cc30 ("RDMA/cma: Fix use after free race in roce multicast join")
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/20230927090511.603595-1-markzhang@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: pxa: disable pinctrl calls for MMP_GPIO

commit f0575116507b981e6a810e78ce3c9040395b958b upstream.

Similarly to PXA3xx and MMP2, pinctrl-single isn't capable of setting
pin direction on MMP either.

Fixes: a770d946371e ("gpio: pxa: add pin control gpio direction and request")
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: aspeed: fix the GPIO number passed to pinctrl_gpio_set_config()

commit f9315f17bf778cb8079a29639419fcc8a41a3c84 upstream.

pinctrl_gpio_set_config() expects the GPIO number from the global GPIO
numberspace, not the controller-relative offset, which needs to be added
to the chip base.

Fixes: 5ae4cb94b313 ("gpio: aspeed: Add debounce support")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/mlx4: Fix the size of a buffer in add_port_entries()

commit d7f393430a17c2bfcdf805462a5aa80be4285b27 upstream.

In order to be sure that 'buff' is never truncated, its size should be
12, not 11.

When building with W=1, this fixes the following warnings:

  drivers/infiniband/hw/mlx4/sysfs.c: In function ‘add_port_entries’:
  drivers/infiniband/hw/mlx4/sysfs.c:268:34: error: ‘sprintf’ may write a terminating nul past the end of the destination [-Werror=format-overflow=]
    268 |                 sprintf(buff, "%d", i);
        |                                  ^
  drivers/infiniband/hw/mlx4/sysfs.c:268:17: note: ‘sprintf’ output between 2 and 12 bytes into a destination of size 11
    268 |                 sprintf(buff, "%d", i);
        |                 ^~~~~~~~~~~~~~~~~~~~~~
  drivers/infiniband/hw/mlx4/sysfs.c:286:34: error: ‘sprintf’ may write a terminating nul past the end of the destination [-Werror=format-overflow=]
    286 |                 sprintf(buff, "%d", i);
        |                                  ^
  drivers/infiniband/hw/mlx4/sysfs.c:286:17: note: ‘sprintf’ output between 2 and 12 bytes into a destination of size 11
    286 |                 sprintf(buff, "%d", i);
        |                 ^~~~~~~~~~~~~~~~~~~~~~

Fixes: c1e7e466120b ("IB/mlx4: Add iov directory in sysfs under the ib device")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/0bb1443eb47308bc9be30232cc23004c4d4cf43e.1695448530.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>