media: rzg2l-cru: Remove unneeded semicolon

./drivers/media/platform/renesas/rzg2l-cru/rzg2l-csi2.c:409:2-3: Unneeded semicolon
./drivers/media/platform/renesas/rzg2l-cru/rzg2l-video.c:407:2-3: Unneeded semicolon

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3273
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: s5c73m3: remove support for platform data

There are no existing users of s5c73m3_platform_data in the tree, and
new users should either be using device tree, ACPI, or static device
properties, so let's remove it from the driver.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: microchip: microchip-isc: replace v4l2_{dbg|info|err} with dev-*

v4l2_dbg and friends are legacy and should be removed.
Replaced all the calls with dev_dbg equivalent.
This also removes the 'debug' module parameter which has become obsolete.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: add imx415 cmos image sensor driver

Add driver for the Sony IMX415 CMOS image sensor.

Signed-off-by: Gerald Loacker <gerald.loacker@wolfvision.net>
Co-developed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: dt-bindings: media: i2c: add imx415 cmos image sensor

Add devicetree binding for the Sony IMX415 CMOS image sensor.

Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: ipu3-cio2: Fix PM runtime usage_count in driver unbind

Get the PM runtime usage_count and forbid PM runtime at driver unbind. The
opposite is being done in probe() already.

Fixes: commit c2a6a07afe4a ("media: intel-ipu3: cio2: add new MIPI-CSI2 driver")
Cc: stable@vger.kernel.org # for >= 4.16
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: ov5670: Handle RO controls in set_ctrl

The ov5670 driver registers three controls as read-only:
- V4L2_CID_PIXEL_RATE
- V4L2_CID_LINK_FREQ
- V4L2_CID_HBLANK

The driver updates the range of HBLANK with __v4l2_ctrl_modify_range()
and updates the values of PIXEL_RATE and LINK_FREQ with an
explicit call to __v4l2_ctrl_s_ctrl() in ov5670_set_pad_format() time.

This causes the .set_ctrl handler to be called on these controls
causing a non-fatal warning to be emitted:

ov5670_set_ctrl Unhandled id:0x9e0902, val:0x824

This is currently only critical for HBLANK, as LINK_FREQ and PIXEL_RATE
currently only support a single value, and the v4l2-ctrl framework skips
calling .set_ctrl() if the current control value is not changed.

Expand the ov5670_set_ctrl() callback to handle the above controls
to remove the above warning and defend against future expansions
of the supported pixel rates and link frequencies.

Also be stricter and return an error value if a control is actually not
handled.

Reported-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: ov5670: Add .get_selection() support

Add support for the .get_selection() pad operation to the ov5670 sensor
driver.

Report the native sensor size (pixel array), the crop bounds (readable
pixel array area) and the current and default analog crop rectangles.

Currently all driver's modes use an analog crop rectangle of size
[12, 4, 2600, 1952]. Instead of hardcoding the value in the operation
implementation, ad an .analog_crop field to the sensor's modes
definitions, to make sure that if any mode gets added, its crop
rectangle will be defined as well.

While at it re-sort the modes' field definition order to match the
declaration order and initialize the crop rectangle in init_cfg().

[Sakari Ailus: Fix a typo on comments (03800 -> 0x3800)]

Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: ov5670: Implement init_cfg

Implement the .init_cfg() pad operation and initialize the default
format with the default full resolution mode 2592x1944.

With .init_cfg() pad operation implemented the deprecated .open()
internal operation can now be dropped.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: ov5670: Add runtime_pm operations

Implement the runtime resume and suspend routines and install them as
runtime_pm handlers.

While at it rework the probe() sequence in order to enable runtime_pm
before registering the async subdevice.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: ov5670: Probe GPIOs

The OV5670 has a powerdown and reset pin, named respectively "PWDN" and
"XSHUTDOWN".

Optionally probe the gpios connected to the pins during the driver probe
routine.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: ov5670: Probe regulators

The OV5670 has three power supplies (AVDD, DOVDD and DVDD).

Probe them in the driver to prepare controlling with runtime_pm
operations.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: ov5670: Use common clock framework

Add support for probing the main system clock using the common clock
framework and its OF bindings.

Maintain ACPI compatibility by falling back to parse 'clock-frequency'.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: ov5670: Allow probing with OF

The ov5670 driver currently only supports probing using ACPI matching.
Add support for OF and add a missing header inclusion.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: dt-bindings: Add OV5670

Add the bindings documentation for Omnivision OV5670 image sensor.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: ov5675: add .get_selection support

The sensor has 2592*1944 active pixels, surrounded by 16 active dummy
pixels and there are an additional 24 black rows "at the bottom".

                     [2624]
        +-----+------------------+-----+
        |     |     16 dummy     |     |
        +-----+------------------+-----+
        |     |                  |     |
        |     |     [2592]       |     |
        |     |                  |     |
        |16   |      valid       | 16  |[2000]
        |dummy|                  |dummy|
        |     |            [1944]|     |
        |     |                  |     |
        +-----+------------------+-----+
        |     |     16 dummy     |     |
        +-----+------------------+-----+
        |     |  24 black lines  |     |
        +-----+------------------+-----+

The top-left coordinate is gotten from the registers specified in the
modes which are identical for both currently supported modes.

There are currently two modes supported by this driver: 2592*1944 and
1296*972. The second mode is obtained thanks to subsampling while
keeping the same field of view (FoV). No cropping involved, hence the
harcoded values.

Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: ov5675: parse and register V4L2 device tree properties

Parse V4L2 device tree properties and register controls for them.

Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: ov5675: add device-tree support and support runtime PM

Until now, this driver only supported ACPI. This adds support for
Device Tree too while enabling clock and regulators in runtime PM.

Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: dt-bindings: ov5675: document YAML binding

This patch adds documentation of device tree in YAML schema for the
OV5675 CMOS image sensor from Omnivision.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: imx219: Fix binning for RAW8 capture

2x2 binning works fine for RAW10 capture, but for RAW8 1232p mode it
leads to corrupted frames [1][2].

Using the special 2x2 analog binning mode fixes the issue, but causes
artefacts for RAW10 1232p capture. So here we choose the binning mode
depending upon the frame format selected.

As both binning modes work fine for 480p RAW8 and RAW10 capture, it can
share the same code path as 1232p for selecting binning mode.

[1] https://forums.raspberrypi.com/viewtopic.php?t=332103
[2] https://github.com/raspberrypi/libcamera-apps/issues/281

Fixes: 22da1d56e982 ("media: i2c: imx219: Add support for RAW8 bit bayer format")
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: sun4i-csi: Use CSI_INT_STA_REG name, fix typo in a comment

Fix interrupt status register offset usage to be a defined name
CSI_INT_STA_REG (= 0x34) instead of a plain number.

Additionally fix a typo in a comment of the same file.

Signed-off-by: Oleg Verych <olecom@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: IMX296 camera sensor driver

The IMX296LLR is a monochrome 1.60MP CMOS sensor from Sony. The driver
supports cropping and binning (but not both at the same time due to
hardware limitations) and exposure, gain, vertical blanking and test
pattern controls.

Preliminary support is also included for the color IMX296LQR sensor.

[Sakari Ailus: Make driver's remove function return void]

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: dt-bindings: media: i2c: Add IMX296 CMOS sensor binding

Add YAML devicetree binding for IMX296 CMOS image sensor. Let's also
add MAINTAINERS entry for the binding and driver.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: ov5640: Fix analogue gain control

Gain control is badly documented in publicly available (including
leaked) documentation.

There is an AGC pre-gain in register 0x3a13, expressed as a 6-bit value
(plus an enable bit in bit 6). The driver hardcodes it to 0x43, which
one application note states is equal to x1.047. The documentation also
states that 0x40 is equel to x1.000. The pre-gain thus seems to be
expressed as in 1/64 increments, and thus ranges from x1.00 to x1.984.
What the pre-gain does is however unspecified.

There is then an AGC gain limit, in registers 0x3a18 and 0x3a19,
expressed as a 10-bit "real gain format" value. One application note
sets it to 0x00f8 and states it is equal to x15.5, so it appears to be
expressed in 1/16 increments, up to x63.9375.

The manual gain is stored in registers 0x350a and 0x350b, also as a
10-bit "real gain format" value. It is documented in the application
note as a Q6.4 values, up to x63.9375.

One version of the datasheet indicates that the sensor supports a
digital gain:

  The OV5640 supports 1/2/4 digital gain. Normally, the gain is
  controlled automatically by the automatic gain control (AGC) block.

It isn't clear how that would be controlled manually.

There appears to be no indication regarding whether the gain controlled
through registers 0x350a and 0x350b is an analogue gain only or also
includes digital gain. The words "real gain" don't necessarily mean
"combined analogue and digital gains". Some OmniVision sensors (such as
the OV8858) are documented as supoprting different formats for the gain
values, selectable through a register bit, and they are called "real
gain format" and "sensor gain format". For that sensor, we have (one of)
the gain registers documented as

  0x3503[2]=0, gain[7:0] is real gain format, where low 4 bits are
  fraction bits, for example, 0x10 is 1x gain, 0x28 is 2.5x gain

  If 0x3503[2]=1, gain[7:0] is sensor gain format, gain[7:4] is coarse
  gain, 00000: 1x, 00001: 2x, 00011: 4x, 00111: 8x, gain[7] is 1,
  gain[3:0] is fine gain. For example, 0x10 is 1x gain, 0x30 is 2x gain,
  0x70 is 4x gain

(The second part of the text makes little sense)

"Real gain" may thus refer to the combination of the coarse and fine
analogue gains as a single value.

The OV5640 0x350a and 0x350b registers thus appear to control analogue
gain. The driver incorrectly uses V4L2_CID_GAIN as V4L2 has a specific
control for analogue gain, V4L2_CID_ANALOGUE_GAIN. Use it.

If registers 0x350a and 0x350b are later found to control digital gain
as well, the driver could then restrict the range of the analogue gain
control value to lower than x64 and add a separate digital gain control.

Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: ov772x: Fix memleak in ov772x_probe()

A memory leak was reported when testing ov772x with bpf mock device:

AssertionError: unreferenced object 0xffff888109afa7a8 (size 8):
  comm "python3", pid 279, jiffies 4294805921 (age 20.681s)
  hex dump (first 8 bytes):
    80 22 88 15 81 88 ff ff                          ."......
  backtrace:
    [<000000009990b438>] __kmalloc_node+0x44/0x1b0
    [<000000009e32f7d7>] kvmalloc_node+0x34/0x180
    [<00000000faf48134>] v4l2_ctrl_handler_init_class+0x11d/0x180 [videodev]
    [<00000000da376937>] ov772x_probe+0x1c3/0x68c [ov772x]
    [<000000003f0d225e>] i2c_device_probe+0x28d/0x680
    [<00000000e0b6db89>] really_probe+0x17c/0x3f0
    [<000000001b19fcee>] __driver_probe_device+0xe3/0x170
    [<0000000048370519>] driver_probe_device+0x49/0x120
    [<000000005ead07a0>] __device_attach_driver+0xf7/0x150
    [<0000000043f452b8>] bus_for_each_drv+0x114/0x180
    [<00000000358e5596>] __device_attach+0x1e5/0x2d0
    [<0000000043f83c5d>] bus_probe_device+0x126/0x140
    [<00000000ee0f3046>] device_add+0x810/0x1130
    [<00000000e0278184>] i2c_new_client_device+0x359/0x4f0
    [<0000000070baf34f>] of_i2c_register_device+0xf1/0x110
    [<00000000a9f2159d>] of_i2c_notify+0x100/0x160
unreferenced object 0xffff888119825c00 (size 256):
  comm "python3", pid 279, jiffies 4294805921 (age 20.681s)
  hex dump (first 32 bytes):
    00 b4 a5 17 81 88 ff ff 00 5e 82 19 81 88 ff ff  .........^......
    10 5c 82 19 81 88 ff ff 10 5c 82 19 81 88 ff ff  .\.......\......
  backtrace:
    [<000000009990b438>] __kmalloc_node+0x44/0x1b0
    [<000000009e32f7d7>] kvmalloc_node+0x34/0x180
    [<0000000073d88e0b>] v4l2_ctrl_new.cold+0x19b/0x86f [videodev]
    [<00000000b1f576fb>] v4l2_ctrl_new_std+0x16f/0x210 [videodev]
    [<00000000caf7ac99>] ov772x_probe+0x1fa/0x68c [ov772x]
    [<000000003f0d225e>] i2c_device_probe+0x28d/0x680
    [<00000000e0b6db89>] really_probe+0x17c/0x3f0
    [<000000001b19fcee>] __driver_probe_device+0xe3/0x170
    [<0000000048370519>] driver_probe_device+0x49/0x120
    [<000000005ead07a0>] __device_attach_driver+0xf7/0x150
    [<0000000043f452b8>] bus_for_each_drv+0x114/0x180
    [<00000000358e5596>] __device_attach+0x1e5/0x2d0
    [<0000000043f83c5d>] bus_probe_device+0x126/0x140
    [<00000000ee0f3046>] device_add+0x810/0x1130
    [<00000000e0278184>] i2c_new_client_device+0x359/0x4f0
    [<0000000070baf34f>] of_i2c_register_device+0xf1/0x110

The reason is that if priv->hdl.error is set, ov772x_probe() jumps to the
error_mutex_destroy without doing v4l2_ctrl_handler_free(), and all
resources allocated in v4l2_ctrl_handler_init() and v4l2_ctrl_new_std()
are leaked.

Fixes: 1112babde214 ("media: i2c: Copy ov772x soc_camera sensor driver")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: ak7375: Add regulator management

Make the driver get needed regulators on probe and enable/disable
them on runtime PM callbacks.

Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Tested-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: dt-bindings: ak7375: Add supplies

Add supply properties to describe regulators needed to power
the AK7375 VCM.

Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: dt-bindings: ak7375: Convert to DT schema

Convert DT bindings document for AKM AK7375 VCM to DT schema
format and add an example.

Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: mc: entity: Fix minor issues in comments and documentation

Commit ae219872834a ("media: mc: entity: Rewrite
media_pipeline_start()") incorrectly referred to entity instead of pad
in a comment, and forgot to update a second comment accordingly when
moving the pipe from entity to pad. Furthermore, it didn't properly
reflow the documentation text it updated.

Fix those small issues.

Fixes: ae219872834a ("media: mc: entity: Rewrite media_pipeline_start()")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: mc: Get media_device directly from pad

Various functions access the media_device from a pad by going through
the entity the pad belongs to. Remove the level of indirection and get
the media_device from the pad directly.

Fixes: 9e3576a1ae2b ("media: mc: convert pipeline funcs to take media_pad")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: ov9282: Switch to use dev_err_probe helper

In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs. It's more simple in error path.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: ov9282: remove unused and unset i2c_client member

This is not need anyway as the i2c_client is stored in v4l2_subdev.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: xilinx: dma: Use media_pipeline_for_each_pad()

Replace usage of the deprecated media graph walk API with the new
media_pipeline_for_each_pad() macro.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: ti: omap4iss: Use media_pipeline_for_each_entity()

Replace usage of the deprecated media graph walk API with the new
media_pipeline_for_each_entity() and media_pipeline_for_each_pad()
macros.

Even though the entity iterator may seem a better match when build the
entity bitmap in iss_video_stream(), it would not be more efficient as
it would still iterate internally over all pads. As the entity iterator
requires explicit iterator initialization and cleanup calls, the code
would be more complex.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: ti: omap3isp: Use media_pipeline_for_each_entity()

Replace usage of the deprecated media graph walk API with the new
media_pipeline_for_each_entity() macro.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: mc: entity: Add entity iterator for media_pipeline

Add a media_pipeline_for_each_entity() macro to iterate over entities in
a pipeline. This should be used by driver as a replacement of the
media_graph_walk API, as iterating over the media_pipeline uses the
cached list of pads and is thus more efficient.

Deprecate the media_graph_walk API to indicate it shouldn't be used in
new drivers.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: mc: entity: Add pad iterator for media_pipeline

Add a media_pipeline_for_each_pad() macro to iterate over pads in a
pipeline. This should be used by driver as a replacement of the
media_graph_walk API, as iterating over the media_pipeline uses the
cached list of pads and is thus more efficient.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: ov5640: Handle delays when no reset_gpio set

Some module manufacturers [1][2] don't expose the RESETB and PWDN pins
of the sensor directly through the 15-pin FFC connector. Instead wiring
~PWDN gpio to the sensor pins with appropriate delays.

In such cases, reset_gpio will not be available to the driver, but it
will still be toggled when the sensor is powered on, and thus we should
still honor the wait time of >= 5ms + 1ms + 20ms (see figure 2-3 in [3])
before attempting any i/o operations over SCCB.

Also, rename the function to ov5640_powerup_sequence to better match the
datasheet (section 2.7).

[1] https://digilent.com/reference/_media/reference/add-ons/pcam-5c/pcam_5c_sch.pdf
[2] https://www.alinx.com/public/upload/file/AN5641_User_Manual.pdf
[3] https://cdn.sparkfun.com/datasheets/Sensors/LightImaging/OV5640_datasheet.pdf

Fixes: 19a81c1426c1 ("[media] add Omnivision OV5640 sensor driver")
Reported-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: ov5640: Fix soft reset sequence and timings

Move the register-based reset out of the init_setting[] and into the
powerup_sequence function. The sensor is power cycled and reset using
the gpio pins so the soft reset is not always necessary.

This also ensures that soft reset honors the timing sequence
from the datasheet [1].

[1] https://cdn.sparkfun.com/datasheets/Sensors/LightImaging/OV5640_datasheet.pdf

Fixes: 19a81c1426c1 ("[media] add Omnivision OV5640 sensor driver")
Reported-by: Nishanth Menon <nm@ti.com>
Suggested-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonaboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: st-vgxy61: Use asm intead of asm-generic

There is no point to specify asm-generic for the unaligned.h.
Drop the 'generic' suffix and move the inclusion to be after
the non-media linux/* ones.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: ov5640: Update last busy timestamp to reset autosuspend timer

Otherwise autosuspend delay doesn't work and power is cut off
immediately as device is freed.

Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: Add driver for OmniVision OV8858

Add a driver for OmniVision OV8858 image sensor.

The driver currently supports operations with 2 and 4 data lanes, in
full resolution and half-binned resolution modes.

The driver has been upported from the PinephonePro BSP available at
https://gitlab.com/pine64-org/linux.git
at commit 8c4a90c12dc2 ("media: i2c: ov8858: Use default subdev
name").

Signed-off-by: Nicholas Roth <nicholas@rothemail.net>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: dt-bindings: media: Add OmniVision OV8858

Add binding schema for the OmniVision OV8858 8 Megapixels camera sensor.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: imx290: Handle error from imx290_set_data_lanes()

Check the error status returned by imx290_set_data_lanes() in its
caller and propagate it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: imx290: Simplify imx290_set_data_lanes()

There's no need to check for an incorrect number of data lanes in
imx290_set_data_lanes() as the value is validated at probe() time. Drop
the check.

The PHY_LANE_NUM and CSI_LANE_MODE registers are programmed with a value
equal to the number of lanes minus one. Compute it instead of handling
it in the switch/case.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: imx290: Configure data lanes at start time

There's no need to configure the data lanes in the runtime PM resume
handler. Do so in imx290_start_streaming() instead.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: imx290: Initialize runtime PM before subdev

Initializing the subdev before runtime PM means that no subdev
initialization can interact with the runtime PM framework. This can be
problematic when modifying controls, as the .s_ctrl() handler commonly
calls pm_runtime_get_if_in_use(). These code paths are not trivial,
making the driver fragile and possibly causing subtle bugs.

To make the subdev initialization more robust, initialize runtime PM
first.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: imx290: Use runtime PM autosuspend

Use runtime PM autosuspend to avoid powering off the sensor during fast
stop-reconfigure-restart cycles. This also fixes runtime PM handling in
the probe function that didn't suspend the device, effectively leaving
it resumed forever.

While at it, improve documentation of power management in probe() and
remove().

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: imx290: Rename, extend and expand usage of imx290_pixfmt

The imx290_pixfmt structure contains information about formats,
currently limited to the bpp value. Extend it with the register settings
for each format, and rename it to imx290_format_info to make its purpose
clearer. Add a function named imx290_format_info() to look up format
info for a media bus code, and use it through the code. This allows
dropping the imx290 bpp field as the value is now looked up dynamically.

The error handling in imx290_setup_format() can also be dropped, as the
format is guaranteed by imx290_set_fmt() to be valid.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: imx290: Use V4L2 subdev active state

Use the V4L2 subdev active state API to store the active format. This
simplifies the driver not only by dropping the imx290 current_format
field, but it also allows dropping the imx290 lock, replaced with the
state lock.

The lock check in imx290_ctrl_update() can be dropped as
imx290_set_fmt() can't be called anywmore with which set to ACTIVE
before controls are initialized.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: imx290: Factor out clock initialization to separate function

Move the external clock initialization code from probe() to a separate
function to improve readability. No functional change intended.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: imx290: Use dev_err_probe()

Improve error handling in the probe() function with dev_err_probe().

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: imx290: Factor out DT parsing to separate function

Make the probe() function more readable by factoring out the DT parsing
code to a separate function. No functional change intended.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: imx290: Factor out black level setting to a function

The black level programmed in the BLKLEVEL register depends on the
output format. The black level value computation is currently performed
in imx290_set_ctrl(), in addition to having different black level values
in the output-specific register value tables. Move it to a separate
function to simplify the imx290_set_ctrl() code.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: imx290: Compute pixel rate and blanking in one place

The hblank, vblank, pixel rate and link frequency values and limits are
currently computed when creating controls, in imx290_ctrl_init(), and
updated in imx290_ctrl_update(). This duplicates the logic in different
places. Simplify the code by setting the control values and limits to
hardcoded values when creating the controls, and call
imx290_ctrl_update() to then update them.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: imx290: Pass format and mode to imx290_calc_pixel_rate()

Avoid accessing the imx290 current_format and current_mode fields in
imx290_calc_pixel_rate() to prepare for the removal of those fields.
Among the two callers of the function, imx290_ctrl_update() has an
explicit mode pointer already, and we can also give it a format pointer.
Use those explicitly.

While at it, inline the imx290_get_link_freq() function in
imx290_calc_pixel_rate() as it is only called there.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: imx290: Access link_freq_index directly

The imx290_get_link_freq_index() function hides the fact that it relies
on the imx290 current_mode field, which obfuscates the code instead of
making it more readable. Inline it in the callers, and use the mode
pointer we already have in imx290_ctrl_update() instead of using the
current_mode field.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: imx290: Factor out control update code to a function

Move the control update code to a separate function to group it with all
the control-related code and make imx290_set_fmt() more readable.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: imx290: Factor out subdev init and cleanup to functions

The probe() function is large. Make it more readable by factoring the
subdev initialization code out. While at it, rename the error labels as
the "free_" prefix isn't accurate.

No functional change intended.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: imx290: Group functions in sections

Move functions around to group them in logical sections, in order to
improve readability. As a result, the IMX290_NUM_SUPPLIES macro has to
be changed. No other code change is included, only moves.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: ov5640: set correct default format for CSI-2 mode

In commit a89f14bbcfa5 ("media: ov5640: Split DVP and CSI-2 formats"),
it splits format list for DVP and CSI-2 mode, but the default format
defined in commit 90b0f355c5a3 ("media: ov5640: Implement init_cfg")
is only supported by DVP mode, so define a new default format for
CSI-2 mode.

Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: imx219: Support four-lane operation

The imx219 camera is capable of either two-lane or four-lane
operation.  When operating in four-lane, both the pixel rate and
link frequency change. Regardless of the mode, however, both
frequencies remain fixed.

Helper functions are needed to read and set pixel and link frequencies
which also reduces the number of fixed registers in the table of modes.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: imx219: Split common registers from mode tables

There are four modes, and each mode has a table of registers.
Some of the registers are common to all modes, so create new
tables for these common registers to reduce duplicate code.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: tc358746: fix possible endianness issue

Using the u64 v4l2_dbg_register.val directly can lead to unexpected
results depending on machine endianness. Fix this by using a local
variable which is assigned afterwards. Since tc358746_read() will init
the val variable to 0 we can assing it without checking the return value
first.

Addresses-Coverity-ID: 1527256 ("Integer handling issues")

Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Fixes: 80a21da36051 ("media: tc358746: add Toshiba TC358746 Parallel to CSI-2 bridge driver")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: tc358746: fix ignoring read error in g_register callback

Currently we ignore the return value of tc358746_read() and return
alawys return 0 which is wrong. Fix this by returning the actual return
value of the read operation which is either 0 on success or an error
value.

Addresses-Coverity-ID: 1527254 ("Error handling issues")

Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Fixes: 80a21da36051 ("media: tc358746: add Toshiba TC358746 Parallel to CSI-2 bridge driver")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: tc358746: fix missing return assignment

It was intended to return an error if tc358746_update_bits() call fail.
Fix this by storing the return code.

Addresses-Coverity-ID: 1527252 ("Control flow issues")

Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Fixes: 80a21da36051 ("media: tc358746: add Toshiba TC358746 Parallel to CSI-2 bridge driver")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: ov5675: Fix memleak in ov5675_init_controls()

There is a kmemleak when testing the media/i2c/ov5675.c with bpf mock
device:

AssertionError: unreferenced object 0xffff888107362160 (size 16):
  comm "python3", pid 277, jiffies 4294832798 (age 20.722s)
  hex dump (first 16 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000abe7d67c>] __kmalloc_node+0x44/0x1b0
    [<000000008a725aac>] kvmalloc_node+0x34/0x180
    [<000000009a53cd11>] v4l2_ctrl_handler_init_class+0x11d/0x180
[videodev]
    [<0000000055b46db0>] ov5675_probe+0x38b/0x897 [ov5675]
    [<00000000153d886c>] i2c_device_probe+0x28d/0x680
    [<000000004afb7e8f>] really_probe+0x17c/0x3f0
    [<00000000ff2f18e4>] __driver_probe_device+0xe3/0x170
    [<000000000a001029>] driver_probe_device+0x49/0x120
    [<00000000e39743c7>] __device_attach_driver+0xf7/0x150
    [<00000000d32fd070>] bus_for_each_drv+0x114/0x180
    [<000000009083ac41>] __device_attach+0x1e5/0x2d0
    [<0000000015b4a830>] bus_probe_device+0x126/0x140
    [<000000007813deaf>] device_add+0x810/0x1130
    [<000000007becb867>] i2c_new_client_device+0x386/0x540
    [<000000007f9cf4b4>] of_i2c_register_device+0xf1/0x110
    [<00000000ebfdd032>] of_i2c_notify+0xfc/0x1f0

ov5675_init_controls() won't clean all the allocated resources in fail
path, which may causes the memleaks. Add v4l2_ctrl_handler_free() to
prevent memleak.

Fixes: bf27502b1f3b ("media: ov5675: Add support for OV5675 sensor")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: ov2740: Fix memleak in ov2740_init_controls()

There is a kmemleak when testing the media/i2c/ov2740.c with bpf mock
device:

unreferenced object 0xffff8881090e19e0 (size 16):
  comm "51-i2c-ov2740", pid 278, jiffies 4294781584 (age 23.613s)
  hex dump (first 16 bytes):
    00 f3 7c 0b 81 88 ff ff 80 75 6a 09 81 88 ff ff  ..|......uj.....
  backtrace:
    [<000000004e9fad8f>] __kmalloc_node+0x44/0x1b0
    [<0000000039c802f4>] kvmalloc_node+0x34/0x180
    [<000000009b8b5c63>] v4l2_ctrl_handler_init_class+0x11d/0x180
[videodev]
    [<0000000038644056>] ov2740_probe+0x37d/0x84f [ov2740]
    [<0000000092489f59>] i2c_device_probe+0x28d/0x680
    [<000000001038babe>] really_probe+0x17c/0x3f0
    [<0000000098c7af1c>] __driver_probe_device+0xe3/0x170
    [<00000000e1b3dc24>] device_driver_attach+0x34/0x80
    [<000000005a04a34d>] bind_store+0x10b/0x1a0
    [<00000000ce25d4f2>] drv_attr_store+0x49/0x70
    [<000000007d9f4e9a>] sysfs_kf_write+0x8c/0xb0
    [<00000000be6cff0f>] kernfs_fop_write_iter+0x216/0x2e0
    [<0000000031ddb40a>] vfs_write+0x658/0x810
    [<0000000041beecdd>] ksys_write+0xd6/0x1b0
    [<0000000023755840>] do_syscall_64+0x38/0x90
    [<00000000b2cc2da2>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

ov2740_init_controls() won't clean all the allocated resources in fail
path, which may causes the memleaks. Add v4l2_ctrl_handler_free() to
prevent memleak.

Fixes: 866edc895171 ("media: i2c: Add ov2740 image sensor driver")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: max9286: Fix memleak in max9286_v4l2_register()

There is a kmemleak when testing the media/i2c/max9286.c with bpf mock
device:

kmemleak: 5 new suspected memory leaks (see /sys/kernel/debug/kmemleak)

unreferenced object 0xffff88810defc400 (size 256):
  comm "python3", pid 278, jiffies 4294737563 (age 31.978s)
  hex dump (first 32 bytes):
    28 06 a7 0a 81 88 ff ff 00 fe 22 12 81 88 ff ff  (.........".....
    10 c4 ef 0d 81 88 ff ff 10 c4 ef 0d 81 88 ff ff  ................
  backtrace:
    [<00000000191de6a7>] __kmalloc_node+0x44/0x1b0
    [<000000002f4912b7>] kvmalloc_node+0x34/0x180
    [<0000000057dc4cae>] v4l2_ctrl_new+0x325/0x10f0 [videodev]
    [<0000000026030272>] v4l2_ctrl_new_std+0x16f/0x210 [videodev]
    [<00000000f0d9ea2f>] max9286_probe+0x76e/0xbff [max9286]
    [<00000000ea8f6455>] i2c_device_probe+0x28d/0x680
    [<0000000087529af3>] really_probe+0x17c/0x3f0
    [<00000000b08be526>] __driver_probe_device+0xe3/0x170
    [<000000004382edea>] driver_probe_device+0x49/0x120
    [<000000007bde528a>] __device_attach_driver+0xf7/0x150
    [<000000009f9c6ab4>] bus_for_each_drv+0x114/0x180
    [<00000000c8aaf588>] __device_attach+0x1e5/0x2d0
    [<0000000041cc06b9>] bus_probe_device+0x126/0x140
    [<000000002309860d>] device_add+0x810/0x1130
    [<000000002827bf98>] i2c_new_client_device+0x359/0x4f0
    [<00000000593bdc85>] of_i2c_register_device+0xf1/0x110

max9286_v4l2_register() calls v4l2_ctrl_new_std(), but won't free the
created v412_ctrl when fwnode_graph_get_endpoint_by_id() failed, which
causes the memleak. Call v4l2_ctrl_handler_free() to free the v412_ctrl.

Fixes: 66d8c9d2422d ("media: i2c: Add MAX9286 driver")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: tm6000: remove deprecated driver

The tm6000 driver does not use the vb2 framework for streaming
video, instead it uses the old vb1 framework and nobody stepped in to
convert this driver to vb2.

The hardware is very old, so the decision was made to remove it
altogether since we want to get rid of the old vb1 framework.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: vpfe_capture: remove deprecated davinci drivers

The vpfe_capture drivers do not use the vb2 framework for streaming
video, instead they use the old vb1 framework and nobody stepped in to
convert these drivers to vb2.

The hardware is very old, so the decision was made to remove them
altogether since we want to get rid of the old vb1 framework.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: zr364xx: remove deprecated driver

The zr364xx driver does not use the vb2 framework for streaming
video, instead it uses the old vb1 framework and nobody stepped in to
convert this driver to vb2.

The hardware is very old, so the decision was made to remove it
altogether since we want to get rid of the old vb1 framework.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: stkwebcam: remove deprecated driver

The stkwebcam driver does not use the vb2 framework for streaming
video, instead it implements this in the driver. This is error prone,
and nobody stepped in to convert this driver to that framework.

The hardware is very old, so the decision was made to remove it
altogether.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: fsl-viu: remove deprecated driver

The fsl-viu driver does not use the vb2 framework for streaming
video, instead it uses the old vb1 framework and nobody stepped in to
convert this driver to vb2.

The hardware is very old, so the decision was made to remove it
altogether since we want to get rid of the old vb1 framework.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: cpia2: remove deprecated driver

The cpia2 driver does not use the vb2 framework for streaming
video, instead it implements this in the driver. This is error prone,
and nobody stepped in to convert this driver to that framework.

The hardware is very old, so the decision was made to remove it
altogether.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: meye: remove this deprecated driver

The meye driver does not use the vb2 framework for streaming
video, instead it implements this in the driver. This is error prone,
and nobody stepped in to convert this driver to that framework.

The hardware is very old, so the decision was made to remove it
altogether.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: Documentation: Update documentation for streams

Document how streams interacts with formats and selections.

Update documentation in respect to what is allowed, in particular streams
are only supported via full routes, source-only routes are not supported
right now.

The centerpiece of the API additions are streams. Albeit routes are
configured via S_ROUTING IOCTL that also declares streams, it is streams
that are accessed through other APIs. Thus refer to streams instead of
routes in documentation.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: Add stream to frame descriptor

The stream field identifies the stream this frame descriptor applies to in
routing configuration across a multiplexed link.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: v4l2-subdev: Add v4l2_subdev_s_stream_helper() function

The v4l2_subdev_s_stream_helper() helper can be used by subdevs that
implement the stream-aware .enable_streams() and .disable_streams()
operations to implement .s_stream(). This is limited to subdevs that
have a single source pad.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: v4l2-subdev: Add subdev .(enable|disable)_streams() operations

Add two new subdev pad operations, .enable_streams() and
.disable_streams(), to allow control of individual streams per pad. This
is a superset of what the video .s_stream() operation implements.

To help with handling of backward compatibility, add two wrapper
functions around those operations, and require their usage in drivers.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: v4l2-subdev: Add v4l2_subdev_state_xlate_streams() helper

Add a helper function to translate streams between two pads of a subdev,
using the subdev's internal routing table.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: subdev: add v4l2_subdev_routing_validate() helper

Add a v4l2_subdev_routing_validate() helper for verifying routing for
common cases like only allowing non-overlapping 1-to-1 streams.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: subdev: add v4l2_subdev_set_routing_with_fmt() helper

v4l2_subdev_set_routing_with_fmt() is the same as
v4l2_subdev_set_routing(), but additionally initializes all the streams
with the given format.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: subdev: add streams to v4l2_subdev_get_fmt() helper function

Add streams support to v4l2_subdev_get_fmt() helper function. Subdev
drivers that do not need to do anything special in their get_fmt op can
use this helper directly for v4l2_subdev_pad_ops.get_fmt.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: subdev: add "opposite" stream helper funcs

Add two helper functions to make dealing with streams easier:

v4l2_subdev_routing_find_opposite_end - given a routing table and a pad
+ stream, return the pad + stream on the opposite side of the subdev.

v4l2_subdev_state_get_opposite_stream_format - return a pointer to the
format on the pad + stream on the opposite side from the given pad +
stream.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: subdev: use streams in v4l2_subdev_link_validate()

Update v4l2_subdev_link_validate() to use routing and streams for
validation.

Instead of just looking at the format on the pad on both ends of the
link, the routing tables are used to collect all the streams going from
the source to the sink over the link, and the streams' formats on both
ends of the link are verified.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: subdev: add stream based configuration

Add support to manage configurations (format, crop, compose) per stream,
instead of per pad. This is accomplished with data structures that hold
an array of all subdev's stream configurations.

The number of streams can vary at runtime based on routing. Every time
the routing is changed, the stream configurations need to be
re-initialized.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: Documentation: add multiplexed streams documentation

Add documentation related to multiplexed streams.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: subdev: Add for_each_active_route() macro

Add a for_each_active_route() macro to replace the repeated pattern
of iterating on the active routes of a routing table.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: subdev: add v4l2_subdev_set_routing helper()

Add a helper function to set the subdev routing. The helper can be used
from subdev driver's set_routing op to store the routing table.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: subdev: add v4l2_subdev_has_pad_interdep()

Add a v4l2_subdev_has_pad_interdep() helper function which can be used
for media_entity_operations.has_pad_interdep op.

It considers two pads interdependent if there is an active route between
pad0 and pad1.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: subdev: Require code change to enable [GS]_ROUTING

The Streams API is an experimental feature. To use the Streams API, the
user needs to change a variable in v4l2-subdev.c and recompile the kernel.

This commit should be reverted when the Streams API is deemed ready for
production use.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: subdev: Add [GS]_ROUTING subdev ioctls and operations

Add support for subdev internal routing. A route is defined as a single
stream from a sink pad to a source pad.

The userspace can configure the routing via two new ioctls,
VIDIOC_SUBDEV_G_ROUTING and VIDIOC_SUBDEV_S_ROUTING, and subdevs can
implement the functionality with v4l2_subdev_pad_ops.set_routing().

- Add sink and source streams for multiplexed links
- Copy the argument back in case of an error. This is needed to let the
  caller know the number of routes.
- Expand and refine documentation.
- Make the 'routes' pointer a __u64 __user pointer so that a compat32
  version of the ioctl is not required.
- Add struct v4l2_subdev_krouting to be used for subdevice operations.
- Fix typecasing warnings
- Check sink & source pad types
- Add 'which' field
- Routing to subdev state
- Dropped get_routing subdev op

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: Documentation: Add GS_ROUTING documentation

Add documentation for VIDIOC_SUBDEV_G/S_ROUTING ioctl and add
description of multiplexed media pads and internal routing to the
V4L2-subdev documentation section.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: add V4L2_SUBDEV_CAP_STREAMS

Add a subdev capability flag to expose to userspace if a subdev supports
multiplexed streams.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: add V4L2_SUBDEV_FL_STREAMS

Add subdev flag V4L2_SUBDEV_FL_STREAMS. It is used to indicate that the
subdev supports the new API with multiplexed streams (routing, stream
configs).

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: v4l2-subdev: Sort includes

Sort the includes alphabetically.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: imx: imx7-media-csi: fix missing clk_disable_unprepare() in imx7_csi_init()

Add missing clk_disable_unprepare(), if imx7_csi_dma_setup() fails
in imx7_csi_init().

Fixes: ff43ca911978 ("media: imx: imx7-media-csi: Move CSI configuration before source start")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: platform: ti: Add missing check for devm_regulator_get

Add check for the return value of devm_regulator_get since it may return
error pointer.

Fixes: 448de7e7850b ("[media] omap3isp: OMAP3 ISP core")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: dw100: Add a missing unwind goto in dw100_probe()

In case the IRQ allocation returns an error in dw100_probe(), the pm
runtime is not disabled before to return.

Add the missing unwind goto on the error handling path of the IRQ
allocation request.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>