Pengcheng Yang [Tue, 29 Nov 2022 10:40:40 +0000 (18:40 +0800)]
bpf, sockmap: Fix data loss caused by using apply_bytes on ingress redirect
[ Upstream commit
9072931f020bfd907d6d89ee21ff1481cd78b407 ]
Use apply_bytes on ingress redirect, when apply_bytes is less than
the length of msg data, some data may be skipped and lost in
bpf_tcp_ingress().
If there is still data in the scatterlist that has not been consumed,
we cannot move the msg iter.
Fixes:
604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/1669718441-2654-4-git-send-email-yangpc@wangsu.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pengcheng Yang [Tue, 29 Nov 2022 10:40:39 +0000 (18:40 +0800)]
bpf, sockmap: Fix missing BPF_F_INGRESS flag when using apply_bytes
[ Upstream commit
a351d6087bf7d3d8440d58d3bf244ec64b89394a ]
When redirecting, we use sk_msg_to_ingress() to get the BPF_F_INGRESS
flag from the msg->flags. If apply_bytes is used and it is larger than
the current data being processed, sk_psock_msg_verdict() will not be
called when sendmsg() is called again. At this time, the msg->flags is 0,
and we lost the BPF_F_INGRESS flag.
So we need to save the BPF_F_INGRESS flag in sk_psock and use it when
redirection.
Fixes:
8934ce2fd081 ("bpf: sockmap redirect ingress support")
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/1669718441-2654-3-git-send-email-yangpc@wangsu.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pengcheng Yang [Tue, 29 Nov 2022 10:40:38 +0000 (18:40 +0800)]
bpf, sockmap: Fix repeated calls to sock_put() when msg has more_data
[ Upstream commit
7a9841ca025275b5b0edfb0b618934abb6ceec15 ]
In tcp_bpf_send_verdict() redirection, the eval variable is assigned to
__SK_REDIRECT after the apply_bytes data is sent, if msg has more_data,
sock_put() will be called multiple times.
We should reset the eval variable to __SK_NONE every time more_data
starts.
This causes:
IPv4: Attempt to release TCP socket in state 1
00000000b4c925d7
------------[ cut here ]------------
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 5 PID: 4482 at lib/refcount.c:25 refcount_warn_saturate+0x7d/0x110
Modules linked in:
CPU: 5 PID: 4482 Comm: sockhash_bypass Kdump: loaded Not tainted 6.0.0 #1
Hardware name: Red Hat KVM, BIOS 1.11.0-2.el7 04/01/2014
Call Trace:
<TASK>
__tcp_transmit_skb+0xa1b/0xb90
? __alloc_skb+0x8c/0x1a0
? __kmalloc_node_track_caller+0x184/0x320
tcp_write_xmit+0x22a/0x1110
__tcp_push_pending_frames+0x32/0xf0
do_tcp_sendpages+0x62d/0x640
tcp_bpf_push+0xae/0x2c0
tcp_bpf_sendmsg_redir+0x260/0x410
? preempt_count_add+0x70/0xa0
tcp_bpf_send_verdict+0x386/0x4b0
tcp_bpf_sendmsg+0x21b/0x3b0
sock_sendmsg+0x58/0x70
__sys_sendto+0xfa/0x170
? xfd_validate_state+0x1d/0x80
? switch_fpu_return+0x59/0xe0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x37/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes:
cd9733f5d75c ("tcp_bpf: Fix one concurrency problem in the tcp_bpf_send_verdict function")
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/1669718441-2654-2-git-send-email-yangpc@wangsu.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Wed, 30 Nov 2022 23:01:07 +0000 (15:01 -0800)]
Input: wistron_btns - disable on UML
[ Upstream commit
b2b80d9dd14cb5b70dc254bddbc4eea932694791 ]
The wistron_btns driver calls rtc_cmos_read(), which isn't
available with UML builds, so disable this driver on UML.
Prevents this build error:
ld: drivers/input/misc/wistron_btns.o: in function `poll_bios':
wistron_btns.c:(.text+0x4be): undefined reference to `rtc_cmos_read'
Fixes:
0bbadafdc49d ("um: allow disabling NO_IOMEM") # v5.14+
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20221130161604.1879-1-rdunlap@infradead.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Florian Westphal [Tue, 22 Nov 2022 15:00:09 +0000 (16:00 +0100)]
netfilter: conntrack: set icmpv6 redirects as RELATED
[ Upstream commit
7d7cfb48d81353e826493d24c7cec7360950968f ]
icmp conntrack will set icmp redirects as RELATED, but icmpv6 will not
do this.
For icmpv6, only icmp errors (code <= 128) are examined for RELATED state.
ICMPV6 Redirects are part of neighbour discovery mechanism, those are
handled by marking a selected subset (e.g. neighbour solicitations) as
UNTRACKED, but not REDIRECT -- they will thus be flagged as INVALID.
Add minimal support for REDIRECTs. No parsing of neighbour options is
added for simplicity, so this will only check that we have the embeeded
original header (ND_OPT_REDIRECT_HDR), and then attempt to do a flow
lookup for this tuple.
Also extend the existing test case to cover redirects.
Fixes:
9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.")
Reported-by: Eric Garver <eric@garver.life>
Link: https://github.com/firewalld/firewalld/issues/1046
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Garver <eric@garver.life>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Qilong [Wed, 28 Sep 2022 16:04:02 +0000 (00:04 +0800)]
ASoC: pcm512x: Fix PM disable depth imbalance in pcm512x_probe
[ Upstream commit
97b801be6f8e53676b9f2b105f54e35c745c1b22 ]
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by going to
err_pm instead of err_clk.
Fixes:
f086ba9d5389c ("ASoC: pcm512x: Support mastering BCLK/LRCLK using the PLL")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220928160402.126140-1-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Konstantin Meskhidze [Tue, 29 Nov 2022 04:02:54 +0000 (23:02 -0500)]
drm/amdkfd: Fix memory leakage
[ Upstream commit
75818afff631e1ea785a82c3e8bb82eb0dee539c ]
This patch fixes potential memory leakage and seg fault
in _gpuvm_import_dmabuf() function
Fixes:
d4ec4bdc0bd5 ("drm/amdkfd: Allow access for mmapping KFD BOs")
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xiongfeng Wang [Tue, 22 Nov 2022 11:30:43 +0000 (19:30 +0800)]
drm/amdgpu: Fix PCI device refcount leak in amdgpu_atrm_get_bios()
[ Upstream commit
ca54639c7752edf1304d92ff4d0c049d4efc9ba0 ]
As comment of pci_get_class() says, it returns a pci_device with its
refcount increased and decreased the refcount for the input parameter
@from if it is not NULL.
If we break the loop in amdgpu_atrm_get_bios() with 'pdev' not NULL, we
need to call pci_dev_put() to decrease the refcount. Add the missing
pci_dev_put() to avoid refcount leak.
Fixes:
d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xiongfeng Wang [Tue, 22 Nov 2022 11:30:42 +0000 (19:30 +0800)]
drm/radeon: Fix PCI device refcount leak in radeon_atrm_get_bios()
[ Upstream commit
725a521a18734f65de05b8d353b5bd0d3ca4c37a ]
As comment of pci_get_class() says, it returns a pci_device with its
refcount increased and decreased the refcount for the input parameter
@from if it is not NULL.
If we break the loop in radeon_atrm_get_bios() with 'pdev' not NULL, we
need to call pci_dev_put() to decrease the refcount. Add the missing
pci_dev_put() to avoid refcount leak.
Fixes:
d8ade3526b2a ("drm/radeon: handle non-VGA class pci devices with ATRM")
Fixes:
c61e2775873f ("drm/radeon: split ATRM support out from the ATPX handler (v3)")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guchun Chen [Tue, 22 Nov 2022 09:33:24 +0000 (17:33 +0800)]
drm/amd/pm/smu11: BACO is supported when it's in BACO state
[ Upstream commit
6dca7efe6e522bf213c7dab691fa580d82f48f74 ]
Return true early if ASIC is in BACO state already, no need
to talk to SMU. It can fix the issue that driver was not
calling BACO exit at all in runtime pm resume, and a timing
issue leading to a PCI AER error happened eventually.
Fixes:
8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()")
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ricardo Ribalda [Mon, 28 Nov 2022 10:49:16 +0000 (11:49 +0100)]
ASoC: mediatek: mt8173: Enable IRQ when pdata is ready
[ Upstream commit
4cbb264d4e9136acab2c8fd39e39ab1b1402b84b ]
If the device does not come straight from reset, we might receive an IRQ
before we are ready to handle it.
Fixes:
[ 2.334737] Unable to handle kernel read from unreadable memory at virtual address
00000000000001e4
[ 2.522601] Call trace:
[ 2.525040] regmap_read+0x1c/0x80
[ 2.528434] mt8173_afe_irq_handler+0x40/0xf0
...
[ 2.598921] start_kernel+0x338/0x42c
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Fixes:
ee0bcaff109f ("ASoC: mediatek: Add AFE platform driver")
Link: https://lore.kernel.org/r/20221128-mt8173-afe-v1-0-70728221628f@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
AngeloGioacchino Del Regno [Thu, 11 Nov 2021 16:11:08 +0000 (17:11 +0100)]
ASoC: mediatek: mt8173: Fix debugfs registration for components
[ Upstream commit
8c32984bc7da29828260ac514d5d4967f7e8f62d ]
When registering the mt8173-afe-pcm driver, we are also adding two
components: one is for the PCM DAIs and one is for the HDMI DAIs, but
when debugfs is enabled, we're getting the following issue:
[ 17.279176] debugfs: Directory '
11220000.audio-controller' with parent 'mtk-rt5650' already present!
[ 17.288345] debugfs: Directory '
11220000.audio-controller' with parent 'mtk-rt5650' already present!
To overcome to that without any potentially big rewrite of this driver,
similarly to what was done in mt8195-afe-pcm, add a debugfs_prefix to
the components before actually adding them.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20211111161108.502344-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of:
4cbb264d4e91 ("ASoC: mediatek: mt8173: Enable IRQ when pdata is ready")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ben Greear [Wed, 23 Nov 2022 21:02:06 +0000 (23:02 +0200)]
wifi: iwlwifi: mvm: fix double free on tx path.
[ Upstream commit
0473cbae2137b963bd0eaa74336131cb1d3bc6c3 ]
We see kernel crashes and lockups and KASAN errors related to ax210
firmware crashes. One of the KASAN dumps pointed at the tx path,
and it appears there is indeed a way to double-free an skb.
If iwl_mvm_tx_skb_sta returns non-zero, then the 'skb' sent into the
method will be freed. But, in case where we build TSO skb buffer,
the skb may also be freed in error case. So, return 0 in that particular
error case and do cleanup manually.
BUG: KASAN: use-after-free in __list_del_entry_valid+0x12/0x90
iwlwifi 0000:06:00.0: 0x00000000 | tsf hi
Read of size 8 at addr
ffff88813cfa4ba0 by task btserver/9650
CPU: 4 PID: 9650 Comm: btserver Tainted: G W 5.19.8+ #5
iwlwifi 0000:06:00.0: 0x00000000 | time gp1
Hardware name: Default string Default string/SKYBAY, BIOS 5.12 02/19/2019
Call Trace:
<TASK>
dump_stack_lvl+0x55/0x6d
print_report.cold.12+0xf2/0x684
iwlwifi 0000:06:00.0: 0x1D0915A8 | time gp2
? __list_del_entry_valid+0x12/0x90
kasan_report+0x8b/0x180
iwlwifi 0000:06:00.0: 0x00000001 | uCode revision type
? __list_del_entry_valid+0x12/0x90
__list_del_entry_valid+0x12/0x90
iwlwifi 0000:06:00.0: 0x00000048 | uCode version major
tcp_update_skb_after_send+0x5d/0x170
__tcp_transmit_skb+0xb61/0x15c0
iwlwifi 0000:06:00.0: 0xDAA05125 | uCode version minor
? __tcp_select_window+0x490/0x490
iwlwifi 0000:06:00.0: 0x00000420 | hw version
? trace_kmalloc_node+0x29/0xd0
? __kmalloc_node_track_caller+0x12a/0x260
? memset+0x1f/0x40
? __build_skb_around+0x125/0x150
? __alloc_skb+0x1d4/0x220
? skb_zerocopy_clone+0x55/0x230
iwlwifi 0000:06:00.0: 0x00489002 | board version
? kmalloc_reserve+0x80/0x80
? rcu_read_lock_bh_held+0x60/0xb0
tcp_write_xmit+0x3f1/0x24d0
iwlwifi 0000:06:00.0: 0x034E001C | hcmd
? __check_object_size+0x180/0x350
iwlwifi 0000:06:00.0: 0x24020000 | isr0
tcp_sendmsg_locked+0x8a9/0x1520
iwlwifi 0000:06:00.0: 0x01400000 | isr1
? tcp_sendpage+0x50/0x50
iwlwifi 0000:06:00.0: 0x48F0000A | isr2
? lock_release+0xb9/0x400
? tcp_sendmsg+0x14/0x40
iwlwifi 0000:06:00.0: 0x00C3080C | isr3
? lock_downgrade+0x390/0x390
? do_raw_spin_lock+0x114/0x1d0
iwlwifi 0000:06:00.0: 0x00200000 | isr4
? rwlock_bug.part.2+0x50/0x50
iwlwifi 0000:06:00.0: 0x034A001C | last cmd Id
? rwlock_bug.part.2+0x50/0x50
? lockdep_hardirqs_on_prepare+0xe/0x200
iwlwifi 0000:06:00.0: 0x0000C2F0 | wait_event
? __local_bh_enable_ip+0x87/0xe0
? inet_send_prepare+0x220/0x220
iwlwifi 0000:06:00.0: 0x000000C4 | l2p_control
tcp_sendmsg+0x22/0x40
sock_sendmsg+0x5f/0x70
iwlwifi 0000:06:00.0: 0x00010034 | l2p_duration
__sys_sendto+0x19d/0x250
iwlwifi 0000:06:00.0: 0x00000007 | l2p_mhvalid
? __ia32_sys_getpeername+0x40/0x40
iwlwifi 0000:06:00.0: 0x00000000 | l2p_addr_match
? rcu_read_lock_held_common+0x12/0x50
? rcu_read_lock_sched_held+0x5a/0xd0
? rcu_read_lock_bh_held+0xb0/0xb0
? rcu_read_lock_sched_held+0x5a/0xd0
? rcu_read_lock_sched_held+0x5a/0xd0
? lock_release+0xb9/0x400
? lock_downgrade+0x390/0x390
? ktime_get+0x64/0x130
? ktime_get+0x8d/0x130
? rcu_read_lock_held_common+0x12/0x50
? rcu_read_lock_sched_held+0x5a/0xd0
? rcu_read_lock_held_common+0x12/0x50
? rcu_read_lock_sched_held+0x5a/0xd0
? rcu_read_lock_bh_held+0xb0/0xb0
? rcu_read_lock_bh_held+0xb0/0xb0
__x64_sys_sendto+0x6f/0x80
do_syscall_64+0x34/0xb0
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f1d126e4531
Code: 00 00 00 00 0f 1f 44 00 00 f3 0f 1e fa 48 8d 05 35 80 0c 00 41 89 ca 8b 00 85 c0 75 1c 45 31 c9 45 31 c0 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 67 c3 66 0f 1f 44 00 00 55 48 83 ec 20 48 89
RSP: 002b:
00007ffe21a679d8 EFLAGS:
00000246 ORIG_RAX:
000000000000002c
RAX:
ffffffffffffffda RBX:
000000000000ffdc RCX:
00007f1d126e4531
RDX:
0000000000010000 RSI:
000000000374acf0 RDI:
0000000000000014
RBP:
00007ffe21a67ac0 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
0000000000000010
R13:
0000000000000000 R14:
0000000000000001 R15:
0000000000000000
</TASK>
Allocated by task 9650:
kasan_save_stack+0x1c/0x40
__kasan_slab_alloc+0x6d/0x90
kmem_cache_alloc_node+0xf3/0x2b0
__alloc_skb+0x191/0x220
tcp_stream_alloc_skb+0x3f/0x330
tcp_sendmsg_locked+0x67c/0x1520
tcp_sendmsg+0x22/0x40
sock_sendmsg+0x5f/0x70
__sys_sendto+0x19d/0x250
__x64_sys_sendto+0x6f/0x80
do_syscall_64+0x34/0xb0
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Freed by task 9650:
kasan_save_stack+0x1c/0x40
kasan_set_track+0x21/0x30
kasan_set_free_info+0x20/0x30
__kasan_slab_free+0x102/0x170
kmem_cache_free+0xc8/0x3e0
iwl_mvm_mac_itxq_xmit+0x124/0x270 [iwlmvm]
ieee80211_queue_skb+0x874/0xd10 [mac80211]
ieee80211_xmit_fast+0xf80/0x1180 [mac80211]
__ieee80211_subif_start_xmit+0x287/0x680 [mac80211]
ieee80211_subif_start_xmit+0xcd/0x730 [mac80211]
dev_hard_start_xmit+0xf6/0x420
__dev_queue_xmit+0x165b/0x1b50
ip_finish_output2+0x66e/0xfb0
__ip_finish_output+0x487/0x6d0
ip_output+0x11c/0x350
__ip_queue_xmit+0x36b/0x9d0
__tcp_transmit_skb+0xb35/0x15c0
tcp_write_xmit+0x3f1/0x24d0
tcp_sendmsg_locked+0x8a9/0x1520
tcp_sendmsg+0x22/0x40
sock_sendmsg+0x5f/0x70
__sys_sendto+0x19d/0x250
__x64_sys_sendto+0x6f/0x80
do_syscall_64+0x34/0xb0
entry_SYSCALL_64_after_hwframe+0x46/0xb0
The buggy address belongs to the object at
ffff88813cfa4b40
which belongs to the cache skbuff_fclone_cache of size 472
The buggy address is located 96 bytes inside of
472-byte region [
ffff88813cfa4b40,
ffff88813cfa4d18)
The buggy address belongs to the physical page:
page:
ffffea0004f3e900 refcount:1 mapcount:0 mapping:
0000000000000000 index:0xffff88813cfa6c40 pfn:0x13cfa4
head:
ffffea0004f3e900 order:2 compound_mapcount:0 compound_pincount:0
flags: 0x5fff8000010200(slab|head|node=0|zone=2|lastcpupid=0x3fff)
raw:
005fff8000010200 ffffea0004656b08 ffffea0008e8cf08 ffff8881081a5240
raw:
ffff88813cfa6c40 0000000000170015 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88813cfa4a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88813cfa4b00: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
>
ffff88813cfa4b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88813cfa4c00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88813cfa4c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Fixes:
08f7d8b69aaf ("iwlwifi: mvm: bring back mvm GSO code")
Link: https://lore.kernel.org/linux-wireless/20220928193057.16132-1-greearb@candelatech.com/
Tested-by: Amol Jawale <amol.jawale@candelatech.com>
Signed-off-by: Ben Greear <greearb@candelatech.com>
Link: https://lore.kernel.org/r/20221123225313.21b1ee31d666.I3b3ba184433dd2a544d91eeeda29b467021824ae@changeid
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Liu Shixin [Sat, 26 Nov 2022 02:14:29 +0000 (10:14 +0800)]
ALSA: asihpi: fix missing pci_disable_device()
[ Upstream commit
9d86515c3d4c0564a0c31a2df87d735353a1971e ]
pci_disable_device() need be called while module exiting, switch to use
pcim_enable(), pci_disable_device() will be called in pcim_release().
Fixes:
3285ea10e9b0 ("ALSA: asihpi - Interrelated HPI tidy up.")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Link: https://lore.kernel.org/r/20221126021429.3029562-1-liushixin2@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Trond Myklebust [Mon, 14 Nov 2022 22:30:39 +0000 (17:30 -0500)]
NFS: Fix an Oops in nfs_d_automount()
[ Upstream commit
35e3b6ae84935d0d7ff76cbdaa83411b0ad5e471 ]
When mounting from a NFSv4 referral, path->dentry can end up being a
negative dentry, so derive the struct nfs_server from the dentry
itself instead.
Fixes:
2b0143b5c986 ("VFS: normal filesystems (and lustre): d_inode() annotations")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Trond Myklebust [Fri, 4 Nov 2022 17:20:01 +0000 (13:20 -0400)]
NFSv4: Fix a deadlock between nfs4_open_recover_helper() and delegreturn
[ Upstream commit
51069e4aef6257b0454057359faed0ab0c9af083 ]
If we're asked to recover open state while a delegation return is
outstanding, then the state manager thread cannot use a cached open, so
if the server returns a delegation, we can end up deadlocked behind the
pending delegreturn.
To avoid this problem, let's just ask the server not to give us a
delegation unless we're explicitly reclaiming one.
Fixes:
be36e185bd26 ("NFSv4: nfs4_open_recover_helper() must set share access")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Trond Myklebust [Thu, 27 Oct 2022 20:50:12 +0000 (16:50 -0400)]
NFSv4: Fix a credential leak in _nfs4_discover_trunking()
[ Upstream commit
e83458fce080dc23c25353a1af90bfecf79c7369 ]
Fixes:
4f40a5b55446 ("NFSv4: Add an fattr allocation to _nfs4_discover_trunking()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Trond Myklebust [Wed, 19 Oct 2022 17:12:11 +0000 (13:12 -0400)]
NFSv4.2: Fix initialisation of struct nfs4_label
[ Upstream commit
c528f70f504434eaff993a5ddd52203a2010d51f ]
The call to nfs4_label_init_security() should return a fully initialised
label.
Fixes:
aa9c2669626c ("NFS: Client implementation of Labeled-NFS")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Trond Myklebust [Tue, 18 Oct 2022 22:21:14 +0000 (18:21 -0400)]
NFSv4.2: Fix a memory stomp in decode_attr_security_label
[ Upstream commit
43c1031f7110967c240cb6e922adcfc4b8899183 ]
We must not change the value of label->len if it is zero, since that
indicates we stored a label.
Fixes:
b4487b935452 ("nfs: Fix getxattr kernel panic and memory overflow")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Trond Myklebust [Tue, 18 Oct 2022 20:44:47 +0000 (16:44 -0400)]
NFSv4.2: Clear FATTR4_WORD2_SECURITY_LABEL when done decoding
[ Upstream commit
eef7314caf2d73a94b68ba293cd105154d3a664e ]
We need to clear the FATTR4_WORD2_SECURITY_LABEL bitmap flag
irrespective of whether or not the label is too long.
Fixes:
aa9c2669626c ("NFS: Client implementation of Labeled-NFS")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiasheng Jiang [Wed, 16 Nov 2022 03:07:50 +0000 (11:07 +0800)]
ASoC: mediatek: mtk-btcvsd: Add checks for write and read of mtk_btcvsd_snd
[ Upstream commit
d067b3378a78c9c3048ac535e31c171b6f5b5846 ]
As the mtk_btcvsd_snd_write and mtk_btcvsd_snd_read may return error,
it should be better to catch the exception.
Fixes:
4bd8597dc36c ("ASoC: mediatek: add btcvsd driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20221116030750.40500-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Torokhov [Thu, 27 Oct 2022 07:46:48 +0000 (00:46 -0700)]
ASoC: dt-bindings: wcd9335: fix reset line polarity in example
[ Upstream commit
34cb111f8a7b98b5fec809dd194003bca20ef1b2 ]
When resetting the block, the reset line is being driven low and then
high, which means that the line in DTS should be annotated as "active
low".
Fixes:
1877c9fda1b7 ("ASoC: dt-bindings: add dt bindings for wcd9335 audio codec")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221027074652.1044235-2-dmitry.torokhov@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Zekun [Tue, 2 Aug 2022 08:50:50 +0000 (08:50 +0000)]
drm/tegra: Add missing clk_disable_unprepare() in tegra_dc_probe()
[ Upstream commit
7ad4384d53c67672a8720cdc2ef638d7d1710ab8 ]
Add the missing clk_disable_unprepare() before return from
tegra_dc_probe() in the error handling path.
Fixes:
f68ba6912bd2 ("drm/tegra: dc: Link DC1 to DC0 on Tegra20")
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aakarsh Jain [Mon, 14 Nov 2022 11:50:23 +0000 (11:50 +0000)]
media: s5p-mfc: Add variant data for MFC v7 hardware for Exynos 3250 SoC
[ Upstream commit
f50ebe10f5d8092c37e2bd430c78e03bf38b1e20 ]
Commit
5441e9dafdfc6dc40 ("[media] s5p-mfc: Core support for MFC v7")
which adds mfc v7 support for Exynos3250 and use the same compatible
string as used by Exynos5240 but both the IPs are a bit different in
terms of IP clock.
Add variant driver data based on the new compatible string
"samsung,exynos3250-mfc" for Exynos3250 SoC.
Suggested-by: Alim Akhtar <alim.akhtar@samsung.com>
Fixes:
5441e9dafdfc ("[media] s5p-mfc: Core support for MFC v7")
Signed-off-by: Aakarsh Jain <aakarsh.jain@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Baisong Zhong [Sun, 20 Nov 2022 06:59:18 +0000 (06:59 +0000)]
media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()
[ Upstream commit
0ed554fd769a19ea8464bb83e9ac201002ef74ad ]
Wei Chen reports a kernel bug as blew:
general protection fault, probably for non-canonical address
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
...
Call Trace:
<TASK>
__i2c_transfer+0x77e/0x1930 drivers/i2c/i2c-core-base.c:2109
i2c_transfer+0x1d5/0x3d0 drivers/i2c/i2c-core-base.c:2170
i2cdev_ioctl_rdwr+0x393/0x660 drivers/i2c/i2c-dev.c:297
i2cdev_ioctl+0x75d/0x9f0 drivers/i2c/i2c-dev.c:458
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl+0xfb/0x170 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fd834a8bded
In az6027_i2c_xfer(), if msg[i].addr is 0x99,
a null-ptr-deref will caused when accessing msg[i].buf.
For msg[i].len is 0 and msg[i].buf is null.
Fix this by checking msg[i].len in az6027_i2c_xfer().
Link: https://lore.kernel.org/lkml/CAO4mrfcPHB5aQJO=mpqV+p8mPLNg-Fok0gw8gZ=zemAfMGTzMg@mail.gmail.com/
Link: https://lore.kernel.org/linux-media/20221120065918.2160782-1-zhongbaisong@huawei.com
Fixes:
76f9a820c867 ("V4L/DVB: AZ6027: Initial import of the driver")
Reported-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Baisong Zhong <zhongbaisong@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chen Zhongjin [Tue, 8 Nov 2022 03:30:05 +0000 (03:30 +0000)]
media: dvb-core: Fix ignored return value in dvb_register_frontend()
[ Upstream commit
a574359e2e71ce16be212df3a082ed60a4bd2c5f ]
In dvb_register_frontend(), dvb_register_device() is possible to fail
but its return value is ignored.
It will cause use-after-free when module is removed, because in
dvb_unregister_frontend() it tries to unregister a not registered
device.
BUG: KASAN: use-after-free in dvb_remove_device+0x18b/0x1f0 [dvb_core]
Read of size 4 at addr
ffff88800dff4824 by task rmmod/428
CPU: 3 PID: 428 Comm: rmmod
Call Trace:
<TASK>
...
dvb_remove_device+0x18b/0x1f0 [dvb_core]
dvb_unregister_frontend+0x7b/0x130 [dvb_core]
vidtv_bridge_remove+0x6e/0x160 [dvb_vidtv_bridge]
...
Fix this by catching return value of dvb_register_device().
However the fe->refcount can't be put to zero immediately, because
there are still modules calling dvb_frontend_detach() when
dvb_register_frontend() fails.
Link: https://lore.kernel.org/linux-media/20221108033005.169095-1-chenzhongjin@huawei.com
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ZhangPeng [Fri, 25 Nov 2022 07:01:56 +0000 (07:01 +0000)]
pinctrl: pinconf-generic: add missing of_node_put()
[ Upstream commit
5ead93289815a075d43c415e35c8beafafb801c9 ]
of_node_put() needs to be called when jumping out of the loop, since
for_each_available_child_of_node() will increase the refcount of node.
Fixes:
c7289500e29d ("pinctrl: pinconf-generic: scan also referenced phandle node")
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Link: https://lore.kernel.org/r/20221125070156.3535855-1-zhangpeng362@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dario Binacchi [Thu, 17 Nov 2022 11:36:37 +0000 (12:36 +0100)]
clk: imx8mn: fix imx8mn_enet_phy_sels clocks list
[ Upstream commit
2626cf67f20b28446dfc3a5b9493dd535cdb747b ]
According to the "Clock Root" table of the reference manual (document
IMX8MNRM Rev 2, 07/2022):
Clock Root offset Source Select (CCM_TARGET_ROOTn[MUX])
... ... ...
ENET_PHY_REF_CLK_ROOT 0xAA80 000 - 24M_REF_CLK
001 - SYSTEM_PLL2_DIV20
010 - SYSTEM_PLL2_DIV8
011 - SYSTEM_PLL2_DIV5
100 - SYSTEM_PLL2_DIV2
101 - AUDIO_PLL1_CLK
110 - VIDEO_PLL_CLK
111 - AUDIO_PLL2_CLK
... ... ...
while the imx8mn_enet_phy_sels list didn't contained audio_pll1_out for
source select bits 101b.
Fixes:
96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221117113637.1978703-6-dario.binacchi@amarulasolutions.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dario Binacchi [Thu, 17 Nov 2022 11:36:36 +0000 (12:36 +0100)]
clk: imx8mn: fix imx8mn_sai2_sels clocks list
[ Upstream commit
34d996747a74e3a86990f9f9c48de09159d78edb ]
According to the "Clock Root" table of the reference manual (document
IMX8MNRM Rev 2, 07/2022):
Clock Root offset Source Select (CCM_TARGET_ROOTn[MUX])
... ... ...
SAI2_CLK_ROOT 0xA600 000 - 24M_REF_CLK
001 - AUDIO_PLL1_CLK
010 - AUDIO_PLL2_CLK
011 - VIDEO_PLL_CLK
100 - SYSTEM_PLL1_DIV6
110 - EXT_CLK_2
111 - EXT_CLK_3
... ... ...
while the imx8mn_sai2_sels list contained clk_ext3 and clk_ext4 for
source select bits 110b and 111b.
Fixes:
96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221117113637.1978703-5-dario.binacchi@amarulasolutions.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dario Binacchi [Thu, 17 Nov 2022 11:36:34 +0000 (12:36 +0100)]
clk: imx: replace osc_hdmi with dummy
[ Upstream commit
e7fa365ff66f16772dc06b480cd78f858d10856b ]
There is no occurrence of the hdmi oscillator in the reference manual
(document IMX8MNRM Rev 2, 07/2022). Further, if we consider the indexes
76-81 and 134 of the "Clock Root" table of chapter 5 of the RM, there is
no entry for the source select bits 101b, which is the setting referenced
by "osc_hdmi".
Fix by renaming "osc_hdmi" with "dummy", a clock which has already been
used for missing source select bits.
Tested on the BSH SystemMaster (SMM) S2 board.
Fixes:
96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221117113637.1978703-3-dario.binacchi@amarulasolutions.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dario Binacchi [Thu, 17 Nov 2022 11:36:33 +0000 (12:36 +0100)]
clk: imx8mn: rename vpu_pll to m7_alt_pll
[ Upstream commit
a429c60baefd95ab43a2ce7f25d5b2d7a2e431df ]
The IMX8MN platform does not have any video processing unit (VPU), and
indeed in the reference manual (document IMX8MNRM Rev 2, 07/2022) there
is no occurrence of its pll. From an analysis of the code and the RM
itself, I think vpu pll is used instead of m7 alternate pll, probably
for copy and paste of code taken from modules of similar architectures.
As an example for all, if we consider the second row of the "Clock Root"
table of chapter 5 (Clocks and Power Management) of the RM:
Clock Root offset Source Select (CCM_TARGET_ROOTn[MUX])
... ... ...
ARM_M7_CLK_ROOT 0x8080 000 - 24M_REF_CLK
001 - SYSTEM_PLL2_DIV5
010 - SYSTEM_PLL2_DIV4
011 - M7_ALT_PLL_CLK
100 - SYSTEM_PLL1_CLK
101 - AUDIO_PLL1_CLK
110 - VIDEO_PLL_CLK
111 - SYSTEM_PLL3_CLK
... ... ...
but in the source code, the imx8mn_m7_sels clocks list contains vpu_pll
for the source select bits 011b.
So, let's rename "vpu_pll" to "m7_alt_pll" to be consistent with the RM.
The IMX8MN_VPU_* constants have not been removed to ensure backward
compatibility of the patch.
No functional changes intended.
Fixes:
96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221117113637.1978703-2-dario.binacchi@amarulasolutions.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gautam Menghani [Wed, 19 Oct 2022 05:02:14 +0000 (06:02 +0100)]
media: imon: fix a race condition in send_packet()
[ Upstream commit
813ceef062b53d68f296aa3cb944b21a091fabdb ]
The function send_packet() has a race condition as follows:
func send_packet()
{
// do work
call usb_submit_urb()
mutex_unlock()
wait_for_event_interruptible() <-- lock gone
mutex_lock()
}
func vfd_write()
{
mutex_lock()
call send_packet() <- prev call is not completed
mutex_unlock()
}
When the mutex is unlocked and the function send_packet() waits for the
call to complete, vfd_write() can start another call, which leads to the
"URB submitted while active" warning in usb_submit_urb().
Fix this by removing the mutex_unlock() call in send_packet() and using
mutex_lock_interruptible().
Link: https://syzkaller.appspot.com/bug?id=e378e6a51fbe6c5cc43e34f131cc9a315ef0337e
Fixes:
21677cfc562a ("V4L/DVB: ir-core: add imon driver")
Reported-by: syzbot+0c3cb6dc05fbbdc3ad66@syzkaller.appspotmail.com
Signed-off-by: Gautam Menghani <gautammenghani201@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chen Zhongjin [Thu, 10 Nov 2022 07:26:33 +0000 (07:26 +0000)]
media: vimc: Fix wrong function called when vimc_init() fails
[ Upstream commit
f74d3f326d1d5b8951ce263c59a121ecfa65e7c0 ]
In vimc_init(), when platform_driver_register(&vimc_pdrv) fails,
platform_driver_unregister(&vimc_pdrv) is wrongly called rather than
platform_device_unregister(&vimc_pdev), which causes kernel warning:
Unexpected driver unregister!
WARNING: CPU: 1 PID: 14517 at drivers/base/driver.c:270 driver_unregister+0x8f/0xb0
RIP: 0010:driver_unregister+0x8f/0xb0
Call Trace:
<TASK>
vimc_init+0x7d/0x1000 [vimc]
do_one_initcall+0xd0/0x4e0
do_init_module+0x1cf/0x6b0
load_module+0x65c2/0x7820
Fixes:
4a29b7090749 ("[media] vimc: Subdevices as modules")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yuan Can [Thu, 24 Nov 2022 14:05:10 +0000 (14:05 +0000)]
ASoC: qcom: Add checks for devm_kcalloc
[ Upstream commit
1bf5ee979076ceb121ee51c95197d890b1cee7f4 ]
As the devm_kcalloc may return NULL, the return value needs to be checked
to avoid NULL poineter dereference.
Fixes:
24caf8d9eb10 ("ASoC: qcom: lpass-sc7180: Add platform driver for lpass audio")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221124140510.63468-1-yuancan@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wang ShaoBo [Thu, 24 Nov 2022 01:58:17 +0000 (09:58 +0800)]
drbd: destroy workqueue when drbd device was freed
[ Upstream commit
8692814b77ca4228a99da8a005de0acf40af6132 ]
A submitter workqueue is dynamically allocated by init_submitter()
called by drbd_create_device(), we should destroy it when this
device is not needed or destroyed.
Fixes:
113fef9e20e0 ("drbd: prepare to queue write requests on a submit worker")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lore.kernel.org/r/20221124015817.2729789-3-bobo.shaobowang@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wang ShaoBo [Thu, 24 Nov 2022 01:58:16 +0000 (09:58 +0800)]
drbd: remove call to memset before free device/resource/connection
[ Upstream commit
6e7b854e4c1b02dba00760dfa79d8dbf6cce561e ]
This revert
c2258ffc56f2 ("drbd: poison free'd device, resource and
connection structs"), add memset is odd here for debugging, there are
some methods to accurately show what happened, such as kdump.
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lore.kernel.org/r/20221124015817.2729789-2-bobo.shaobowang@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of:
8692814b77ca ("drbd: destroy workqueue when drbd device was freed")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zheng Yongjun [Sat, 19 Nov 2022 07:33:07 +0000 (07:33 +0000)]
mtd: maps: pxa2xx-flash: fix memory leak in probe
[ Upstream commit
2399401feee27c639addc5b7e6ba519d3ca341bf ]
Free 'info' upon remapping error to avoid a memory leak.
Fixes:
e644f7d62894 ("[MTD] MAPS: Merge Lubbock and Mainstone drivers into common PXA2xx driver")
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
[<miquel.raynal@bootlin.com>: Reword the commit log]
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20221119073307.22929-1-zhengyongjun3@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jonathan Toppins [Tue, 22 Nov 2022 21:24:29 +0000 (16:24 -0500)]
bonding: fix link recovery in mode 2 when updelay is nonzero
[ Upstream commit
f8a65ab2f3ff7410921ebbf0dc55453102c33c56 ]
Before this change when a bond in mode 2 lost link, all of its slaves
lost link, the bonding device would never recover even after the
expiration of updelay. This change removes the updelay when the bond
currently has no usable links. Conforming to bonding.txt section 13.1
paragraph 4.
Fixes:
41f891004063 ("bonding: ignore updelay param when there is no active slave")
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Thu, 17 Nov 2022 15:00:03 +0000 (23:00 +0800)]
drm/amdgpu: fix pci device refcount leak
[ Upstream commit
b85e285e3d6352b02947fc1b72303673dfacb0aa ]
As comment of pci_get_domain_bus_and_slot() says, it returns
a pci device with refcount increment, when finish using it,
the caller must decrement the reference count by calling
pci_dev_put().
So before returning from amdgpu_device_resume|suspend_display_audio(),
pci_dev_put() is called to avoid refcount leak.
Fixes:
3f12acc8d6d4 ("drm/amdgpu: put the audio codec into suspend state before gpu reset V3")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xiu Jianfeng [Wed, 23 Nov 2022 09:12:01 +0000 (17:12 +0800)]
clk: rockchip: Fix memory leak in rockchip_clk_register_pll()
[ Upstream commit
739a6a6bbdb793bd57938cb24aa5a6df89983546 ]
If clk_register() fails, @pll->rate_table may have allocated memory by
kmemdup(), so it needs to be freed, otherwise will cause memory leak
issue, this patch fixes it.
Fixes:
90c590254051 ("clk: rockchip: add clock type for pll clocks and pll used on rk3066")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Link: https://lore.kernel.org/r/20221123091201.199819-1-xiujianfeng@huawei.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wang ShaoBo [Wed, 23 Nov 2022 03:46:16 +0000 (11:46 +0800)]
regulator: core: use kfree_const() to free space conditionally
[ Upstream commit
dc8d006d15b623c1d80b90b45d6dcb6e890dad09 ]
Use kfree_const() to free supply_name conditionally in create_regulator()
as supply_name may be allocated from kmalloc() or directly from .rodata
section.
Fixes:
87fe29b61f95 ("regulator: push allocations in create_regulator() outside of lock")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lore.kernel.org/r/20221123034616.3609537-1-bobo.shaobowang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Baisong Zhong [Mon, 21 Nov 2022 11:16:30 +0000 (19:16 +0800)]
ALSA: seq: fix undefined behavior in bit shift for SNDRV_SEQ_FILTER_USE_EVENT
[ Upstream commit
cf59e1e4c79bf741905484cdb13c130b53576a16 ]
Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:
UBSAN: shift-out-of-bounds in sound/core/seq/seq_clientmgr.c:509:22
left shift of 1 by 31 places cannot be represented in type 'int'
...
Call Trace:
<TASK>
dump_stack_lvl+0x8d/0xcf
ubsan_epilogue+0xa/0x44
__ubsan_handle_shift_out_of_bounds+0x1e7/0x208
snd_seq_deliver_single_event.constprop.21+0x191/0x2f0
snd_seq_deliver_event+0x1a2/0x350
snd_seq_kernel_client_dispatch+0x8b/0xb0
snd_seq_client_notify_subscription+0x72/0xa0
snd_seq_ioctl_subscribe_port+0x128/0x160
snd_seq_kernel_client_ctl+0xce/0xf0
snd_seq_oss_create_client+0x109/0x15b
alsa_seq_oss_init+0x11c/0x1aa
do_one_initcall+0x80/0x440
kernel_init_freeable+0x370/0x3c3
kernel_init+0x1b/0x190
ret_from_fork+0x1f/0x30
</TASK>
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Baisong Zhong <zhongbaisong@huawei.com>
Link: https://lore.kernel.org/r/20221121111630.3119259-1-zhongbaisong@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Baisong Zhong [Mon, 21 Nov 2022 11:00:44 +0000 (19:00 +0800)]
ALSA: pcm: fix undefined behavior in bit shift for SNDRV_PCM_RATE_KNOT
[ Upstream commit
b5172e62458f8e6ff359e5f096044a488db90ac5 ]
Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:
UBSAN: shift-out-of-bounds in sound/core/pcm_native.c:2676:21
left shift of 1 by 31 places cannot be represented in type 'int'
...
Call Trace:
<TASK>
dump_stack_lvl+0x8d/0xcf
ubsan_epilogue+0xa/0x44
__ubsan_handle_shift_out_of_bounds+0x1e7/0x208
snd_pcm_open_substream+0x9f0/0xa90
snd_pcm_oss_open.part.26+0x313/0x670
snd_pcm_oss_open+0x30/0x40
soundcore_open+0x18b/0x2e0
chrdev_open+0xe2/0x270
do_dentry_open+0x2f7/0x620
path_openat+0xd66/0xe70
do_filp_open+0xe3/0x170
do_sys_openat2+0x357/0x4a0
do_sys_open+0x87/0xd0
do_syscall_64+0x34/0x80
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Baisong Zhong <zhongbaisong@huawei.com>
Link: https://lore.kernel.org/r/20221121110044.3115686-1-zhongbaisong@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ZhangPeng [Tue, 22 Nov 2022 07:58:53 +0000 (07:58 +0000)]
pinctrl: k210: call of_node_put()
[ Upstream commit
a8acc11643082a706de86a19f1f824712d971984 ]
Since for_each_available_child_of_node() will increase the refcount of
node, we need to call of_node_put() manually when breaking out of the
iteration.
Fixes:
d4c34d09ab03 ("pinctrl: Add RISC-V Canaan Kendryte K210 FPIOA driver")
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20221122075853.2496680-1-zhangpeng362@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marcus Folkesson [Thu, 17 Nov 2022 12:13:26 +0000 (13:13 +0100)]
HID: hid-sensor-custom: set fixed size for custom attributes
[ Upstream commit
9d013910df22de91333a0acc81d1dbb115bd76f6 ]
This is no bugfix (so no Fixes: tag is necessary) as it is
taken care of in hid_sensor_custom_add_attributes().
The motivation for this patch is that:
hid_sensor_custom_field.attr_name and
hid_sensor_custom_field.attrs
has the size of HID_CUSTOM_TOTAL_ATTRS and used in same context.
We compare against HID_CUSTOM_TOTAL_ATTRS when
looping through hid_custom_attrs.
We will silent the smatch error:
hid_sensor_custom_add_attributes() error: buffer overflow
'hid_custom_attrs' 8 <= 10
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stanislav Fomichev [Mon, 21 Nov 2022 18:03:39 +0000 (10:03 -0800)]
bpf: Move skb->len == 0 checks into __bpf_redirect
[ Upstream commit
114039b342014680911c35bd6b72624180fd669a ]
To avoid potentially breaking existing users.
Both mac/no-mac cases have to be amended; mac_header >= network_header
is not enough (verified with a new test, see next patch).
Fixes:
fd1894224407 ("bpf: Don't redirect packets with invalid pkt_len")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20221121180340.1983627-1-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Allen-KH Cheng [Mon, 31 Oct 2022 12:46:33 +0000 (20:46 +0800)]
mtd: spi-nor: Fix the number of bytes for the dummy cycles
[ Upstream commit
fdc20370d93e8c6d2f448a539d08c2c064af7694 ]
The number of bytes used by spi_nor_spimem_check_readop() may be
incorrect for the dummy cycles. Since nor->read_dummy is not initialized
before spi_nor_spimem_adjust_hwcaps().
We use both mode and wait state clock cycles instead of nor->read_dummy.
Fixes:
0e30f47232ab ("mtd: spi-nor: add support for DTR protocol")
Co-developed-by: Bayi Cheng <bayi.cheng@mediatek.com>
Signed-off-by: Bayi Cheng <bayi.cheng@mediatek.com>
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Tested-by: Dhruva Gole <d-gole@ti.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20221031124633.13189-1-allen-kh.cheng@mediatek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Walle [Wed, 10 Aug 2022 22:06:48 +0000 (00:06 +0200)]
mtd: spi-nor: hide jedec_id sysfs attribute if not present
[ Upstream commit
7d388551b6888f3725e6c957f472526b35161a5b ]
Some non-jedec compliant flashes (like the Everspin flashes) don't have
an ID at all. Hide the attribute in this case.
Fixes:
36ac02286265 ("mtd: spi-nor: add initial sysfs support")
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Link: https://lore.kernel.org/r/20220810220654.1297699-2-michael@walle.cc
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Fri, 13 May 2022 18:55:46 +0000 (11:55 -0700)]
inet: add READ_ONCE(sk->sk_bound_dev_if) in inet_csk_bind_conflict()
[ Upstream commit
d2c135619cb89d1d5693df81ab408c5e8e97e898 ]
inet_csk_bind_conflict() can access sk->sk_bound_dev_if for
unlocked sockets.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christoph Hellwig [Wed, 18 Dec 2019 10:39:07 +0000 (11:39 +0100)]
media: videobuf-dma-contig: use dma_mmap_coherent
[ Upstream commit
b3dc3f8e49577840dc8ac8a365c5b3da4edb10b8 ]
dma_alloc_coherent does not return a physical address, but a DMA address,
which might be remapped or have an offset. Passing the DMA address to
vm_iomap_memory is thus broken.
Use the proper dma_mmap_coherent helper instead, and stop passing
__GFP_COMP to dma_alloc_coherent, as the memory management inside the
DMA allocator is hidden from the callers and does not require it.
With this the gfp_t argument to __videobuf_dc_alloc can be removed and
hard coded to GFP_KERNEL.
Fixes:
a8f3c203e19b ("[media] videobuf-dma-contig: add cache support")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yuan Can [Fri, 11 Nov 2022 06:08:53 +0000 (06:08 +0000)]
media: platform: exynos4-is: Fix error handling in fimc_md_init()
[ Upstream commit
b434422c45282a0573d8123239abc41fa72665d4 ]
A problem about modprobe s5p_fimc failed is triggered with the
following log given:
[ 272.075275] Error: Driver 'exynos4-fimc' is already registered, aborting...
modprobe: ERROR: could not insert 's5p_fimc': Device or resource busy
The reason is that fimc_md_init() returns platform_driver_register()
directly without checking its return value, if platform_driver_register()
failed, it returns without unregister fimc_driver, resulting the
s5p_fimc can never be installed later.
A simple call graph is shown as below:
fimc_md_init()
fimc_register_driver() # register fimc_driver
platform_driver_register()
platform_driver_register()
driver_register()
bus_add_driver()
dev = kzalloc(...) # OOM happened
# return without unregister fimc_driver
Fix by unregister fimc_driver when platform_driver_register() returns
error.
Fixes:
d3953223b090 ("[media] s5p-fimc: Add the media device driver")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Thu, 10 Nov 2022 08:24:23 +0000 (16:24 +0800)]
media: solo6x10: fix possible memory leak in solo_sysfs_init()
[ Upstream commit
7f5866dd96d95b74e439f6ee17b8abd8195179fb ]
If device_register() returns error in solo_sysfs_init(), the
name allocated by dev_set_name() need be freed. As comment of
device_register() says, it should use put_device() to give up
the reference in the error path. So fix this by calling
put_device(), then the name can be freed in kobject_cleanup().
Fixes:
dcae5dacbce5 ("[media] solo6x10: sync to latest code from Bluecherry's git repo")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chen Zhongjin [Tue, 8 Nov 2022 07:06:30 +0000 (15:06 +0800)]
media: vidtv: Fix use-after-free in vidtv_bridge_dvb_init()
[ Upstream commit
ba8d9405935097e296bcf7a942c3a01df0edb865 ]
KASAN reports a use-after-free:
BUG: KASAN: use-after-free in dvb_dmxdev_release+0x4d5/0x5d0 [dvb_core]
Call Trace:
...
dvb_dmxdev_release+0x4d5/0x5d0 [dvb_core]
vidtv_bridge_probe+0x7bf/0xa40 [dvb_vidtv_bridge]
platform_probe+0xb6/0x170
...
Allocated by task 1238:
...
dvb_register_device+0x1a7/0xa70 [dvb_core]
dvb_dmxdev_init+0x2af/0x4a0 [dvb_core]
vidtv_bridge_probe+0x766/0xa40 [dvb_vidtv_bridge]
...
Freed by task 1238:
dvb_register_device+0x6d2/0xa70 [dvb_core]
dvb_dmxdev_init+0x2af/0x4a0 [dvb_core]
vidtv_bridge_probe+0x766/0xa40 [dvb_vidtv_bridge]
...
It is because the error handling in vidtv_bridge_dvb_init() is wrong.
First, vidtv_bridge_dmx(dev)_init() will clean themselves when fail, but
goto fail_dmx(_dev): calls release functions again, which causes
use-after-free.
Also, in fail_fe, fail_tuner_probe and fail_demod_probe, j = i will cause
out-of-bound when i finished its loop (i == NUM_FE). And the loop
releasing is wrong, although now NUM_FE is 1 so it won't cause problem.
Fix this by correctly releasing everything.
Fixes:
f90cf6079bf6 ("media: vidtv: add a bridge driver")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Douglas Anderson [Fri, 18 Nov 2022 05:49:19 +0000 (21:49 -0800)]
Input: elants_i2c - properly handle the reset GPIO when power is off
[ Upstream commit
a85fbd6498441694475716a4d5c65f9d3e073faf ]
As can be seen in elants_i2c_power_off(), we want the reset GPIO
asserted when power is off. The reset GPIO is active low so we need
the reset line logic low when power is off to avoid leakage.
We have a problem, though, at probe time. At probe time we haven't
powered the regulators on yet but we have:
devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_LOW);
While that _looks_ right, it turns out that it's not. The
GPIOD_OUT_LOW doesn't mean to init the GPIO to low. It means init the
GPIO to "not asserted". Since this is an active low GPIO that inits it
to be high.
Let's fix this to properly init the GPIO. Now after both probe and
power off the state of the GPIO is consistent (it's "asserted" or
level low).
Once we fix this, we can see that at power on time we no longer to
assert the reset GPIO as the first thing. The reset GPIO is _always_
asserted before powering on. Let's fix powering on to account for
this.
Fixes:
afe10358e47a ("Input: elants_i2c - wire up regulator support")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20221117123805.1.I9959ac561dd6e1e8e1ce7085e4de6167b27c574f@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hui Tang [Mon, 14 Nov 2022 09:02:40 +0000 (17:02 +0800)]
mtd: lpddr2_nvm: Fix possible null-ptr-deref
[ Upstream commit
6bdd45d795adf9e73b38ced5e7f750cd199499ff ]
It will cause null-ptr-deref when resource_size(add_range) invoked,
if platform_get_resource() returns NULL.
Fixes:
96ba9dd65788 ("mtd: lpddr: add driver for LPDDR2-NVM PCM memories")
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20221114090240.244172-1-tanghui20@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rob Clark [Tue, 15 Nov 2022 15:46:34 +0000 (07:46 -0800)]
drm/msm/a6xx: Fix speed-bin detection vs probe-defer
[ Upstream commit
f6d1918794ef92b4e26b80c3d40365347b76b1fd ]
If we get an error (other than -ENOENT) we need to propagate that up the
stack. Otherwise if the nvmem driver hasn't probed yet, we'll end up
end up claiming that we support all the OPPs which is not likely to be
true (and on some generations impossible to be true, ie. if there are
conflicting OPPs).
v2: Update commit msg, gc unused label, etc
v3: Add previously missing \n's
Fixes:
fe7952c629da ("drm/msm: Add speed-bin support to a618 gpu")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/511690/
Link: https://lore.kernel.org/r/20221115154637.1613968-1-robdclark@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xiu Jianfeng [Thu, 10 Nov 2022 06:19:26 +0000 (14:19 +0800)]
wifi: ath10k: Fix return value in ath10k_pci_init()
[ Upstream commit
2af7749047d8d6ad43feff69f555a13a6a6c2831 ]
This driver is attempting to register to support two different buses.
if either of these is successful then ath10k_pci_init() should return 0
so that hardware attached to the successful bus can be probed and
supported. only if both of these are unsuccessful should ath10k_pci_init()
return an errno.
Fixes:
0b523ced9a3c ("ath10k: add basic skeleton to support ahb")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221110061926.18163-1-xiujianfeng@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christoph Hellwig [Tue, 15 Nov 2022 14:10:45 +0000 (22:10 +0800)]
block: clear ->slave_dir when dropping the main slave_dir reference
[ Upstream commit
d90db3b1c8676bc88b4309c5a571333de2263b8e ]
Zero out the pointer to ->slave_dir so that the holder code doesn't
incorrectly treat the object as alive when add_disk failed or after
del_gendisk was called.
Fixes:
89f871af1b26 ("dm: delay registering the gendisk")
Reported-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20221115141054.1051801-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xiu Jianfeng [Sat, 12 Nov 2022 09:27:19 +0000 (17:27 +0800)]
ima: Fix misuse of dereference of pointer in template_desc_init_fields()
[ Upstream commit
25369175ce84813dd99d6604e710dc2491f68523 ]
The input parameter @fields is type of struct ima_template_field ***, so
when allocates array memory for @fields, the size of element should be
sizeof(**field) instead of sizeof(*field).
Actually the original code would not cause any runtime error, but it's
better to make it logically right.
Fixes:
adf53a778a0a ("ima: new templates management mechanism")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
GUO Zihua [Fri, 11 Nov 2022 10:13:17 +0000 (18:13 +0800)]
integrity: Fix memory leakage in keyring allocation error path
[ Upstream commit
39419ef7af0916cc3620ecf1ed42d29659109bf3 ]
Key restriction is allocated in integrity_init_keyring(). However, if
keyring allocation failed, it is not freed, causing memory leaks.
Fixes:
2b6aa412ff23 ("KEYS: Use structure to capture key restriction function and data")
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Brian Starkey [Tue, 13 Sep 2022 14:43:06 +0000 (15:43 +0100)]
drm/fourcc: Fix vsub/hsub for Q410 and Q401
[ Upstream commit
b230555f3257f197dd98641ef6ebaf778b52dd51 ]
These formats are not subsampled, but that means hsub and vsub should be
1, not 0.
Fixes:
94b292b27734 ("drm: drm_fourcc: add NV15, Q410, Q401 YUV formats")
Reported-by: George Kennedy <george.kennedy@oracle.com>
Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
Signed-off-by: Brian Starkey <brian.starkey@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220913144306.17279-1-brian.starkey@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dave Stevenson [Wed, 15 Dec 2021 09:17:37 +0000 (10:17 +0100)]
drm/fourcc: Add packed 10bit YUV 4:2:0 format
[ Upstream commit
006ea1b5822f9019bd722ffc6242bc0880879e3d ]
Adds a format that is 3 10bit YUV 4:2:0 samples packed into
a 32bit word (with 2 spare bits).
Supported on Broadcom BCM2711 chips.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20211215091739.135042-2-maxime@cerno.tech
Stable-dep-of:
b230555f3257 ("drm/fourcc: Fix vsub/hsub for Q410 and Q401")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Konrad Dybcio [Thu, 10 Nov 2022 21:07:05 +0000 (22:07 +0100)]
regulator: qcom-rpmh: Fix PMR735a S3 regulator spec
[ Upstream commit
dd801b2265c81bf0c8b0b4b8f7c1e7bfed078403 ]
PMR735a has a wider range than previously defined. Fix it.
Fixes:
c4e5aa3dbee5 ("regulator: qcom-rpmh: Add PM7325/PMR735A regulator support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20221110210706.80301-1-konrad.dybcio@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Joel Granados [Wed, 2 Nov 2022 17:17:08 +0000 (18:17 +0100)]
nvme: return err on nvme_init_non_mdts_limits fail
[ Upstream commit
bcaf434b8f04e1ee82a8b1e1bce0de99fbff67fa ]
In nvme_init_non_mdts_limits function we were returning 0 when kzalloc
failed; it now returns -ENOMEM.
Fixes:
5befc7c26e5a ("nvme: implement non-mdts command limits")
Signed-off-by: Joel Granados <j.granados@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Tue, 15 Nov 2022 12:56:57 +0000 (15:56 +0300)]
amdgpu/pm: prevent array underflow in vega20_odn_edit_dpm_table()
[ Upstream commit
d27252b5706e51188aed7647126e44dcf9e940c1 ]
In the PP_OD_EDIT_VDDC_CURVE case the "input_index" variable is capped at
2 but not checked for negative values so it results in an out of bounds
read. This value comes from the user via sysfs.
Fixes:
d5bf26539494 ("drm/amd/powerplay: added vega20 overdrive support V3")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Tue, 15 Nov 2022 09:15:08 +0000 (17:15 +0800)]
regulator: core: fix unbalanced of node refcount in regulator_dev_lookup()
[ Upstream commit
f2b41b748c19962b82709d9f23c6b2b0ce9d2f91 ]
I got the the following report:
OF: ERROR: memory leak, expected refcount 1 instead of 2,
of_node_get()/of_node_put() unbalanced - destroy cset entry:
attach overlay node /i2c/pmic@62/regulators/exten
In of_get_regulator(), the node is returned from of_parse_phandle()
with refcount incremented, after using it, of_node_put() need be called.
Fixes:
69511a452e6d ("regulator: map consumer regulator based on device tree")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221115091508.900752-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christoph Hellwig [Mon, 7 Nov 2022 13:01:24 +0000 (14:01 +0100)]
nvmet: only allocate a single slab for bvecs
[ Upstream commit
fa8f9ac42350edd3ce82d0d148a60f0fa088f995 ]
There is no need to have a separate slab cache for each namespace,
and having separate ones creates duplicate debugs file names as well.
Fixes:
d5eff33ee6f8 ("nvmet: add simple file backed ns support")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Michael [Sun, 13 Nov 2022 20:52:17 +0000 (15:52 -0500)]
libbpf: Fix uninitialized warning in btf_dump_dump_type_data
[ Upstream commit
dfd0afbf151d85411b371e841f62b81ee5d1ca54 ]
GCC 11.3.0 fails to compile btf_dump.c due to the following error,
which seems to originate in btf_dump_struct_data where the returned
value would be uninitialized if btf_vlen returns zero.
btf_dump.c: In function ‘btf_dump_dump_type_data’:
btf_dump.c:2363:12: error: ‘err’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
2363 | if (err < 0)
| ^
Fixes:
920d16af9b42 ("libbpf: BTF dumper support for typed data")
Signed-off-by: David Michael <fedora.dm0@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/87zgcu60hq.fsf@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zeng Heng [Mon, 14 Nov 2022 08:56:29 +0000 (16:56 +0800)]
ASoC: pxa: fix null-pointer dereference in filter()
[ Upstream commit
ec7bf231aaa1bdbcb69d23bc50c753c80fb22429 ]
kasprintf() would return NULL pointer when kmalloc() fail to allocate.
Need to check the return pointer before calling strcmp().
Fixes:
7a824e214e25 ("ASoC: mmp: add audio dma support")
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Link: https://lore.kernel.org/r/20221114085629.1910435-1-zengheng4@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xinlei Lee [Wed, 9 Nov 2022 10:00:59 +0000 (18:00 +0800)]
drm/mediatek: Modify dpi power on/off sequence.
[ Upstream commit
ff446c0f6290185cefafe3b376bb86063a3a9f6a ]
Modify dpi power on/off sequence so that the first gpio operation will
take effect.
Fixes:
6bd4763fd532 ("drm/mediatek: set dpi pin mode to gpio low to avoid leakage current")
Signed-off-by: Xinlei Lee <xinlei.lee@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hanjun Guo [Fri, 4 Nov 2022 09:50:02 +0000 (17:50 +0800)]
drm/radeon: Add the missed acpi_put_table() to fix memory leak
[ Upstream commit
10276a20be1115e1f76c189330da2992df980eee ]
When the radeon driver reads the bios information from ACPI
table in radeon_acpi_vfct_bios(), it misses to call acpi_put_table()
to release the ACPI memory after the init, so add acpi_put_table()
properly to fix the memory leak.
v2: fix text formatting (Alex)
Fixes:
268ba0a99f89 ("drm/radeon: implement ACPI VFCT vbios fetch (v3)")
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Khazhismel Kumykov [Tue, 8 Nov 2022 18:10:29 +0000 (10:10 -0800)]
bfq: fix waker_bfqq inconsistency crash
[ Upstream commit
a1795c2ccb1e4c49220d2a0d381540024d71647c ]
This fixes crashes in bfq_add_bfqq_busy due to waker_bfqq being NULL,
but woken_list_node still being hashed. This would happen when
bfq_init_rq() expects a brand new allocated queue to be returned from
bfq_get_bfqq_handle_split() and unconditionally updates waker_bfqq
without resetting woken_list_node. Since we can always return oom_bfqq
when attempting to allocate, we cannot assume waker_bfqq starts as NULL.
Avoid setting woken_bfqq for oom_bfqq entirely, as it's not useful.
Crashes would have a stacktrace like:
[160595.656560] bfq_add_bfqq_busy+0x110/0x1ec
[160595.661142] bfq_add_request+0x6bc/0x980
[160595.666602] bfq_insert_request+0x8ec/0x1240
[160595.671762] bfq_insert_requests+0x58/0x9c
[160595.676420] blk_mq_sched_insert_request+0x11c/0x198
[160595.682107] blk_mq_submit_bio+0x270/0x62c
[160595.686759] __submit_bio_noacct_mq+0xec/0x178
[160595.691926] submit_bio+0x120/0x184
[160595.695990] ext4_mpage_readpages+0x77c/0x7c8
[160595.701026] ext4_readpage+0x60/0xb0
[160595.705158] filemap_read_page+0x54/0x114
[160595.711961] filemap_fault+0x228/0x5f4
[160595.716272] do_read_fault+0xe0/0x1f0
[160595.720487] do_fault+0x40/0x1c8
Tested by injecting random failures into bfq_get_queue, crashes go away
completely.
Fixes:
8ef3fc3a043c ("block, bfq: make shared queues inherit wakers")
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221108181030.1611703-1-khazhy@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Howells [Wed, 7 Sep 2022 18:17:29 +0000 (19:17 +0100)]
rxrpc: Fix ack.bufferSize to be 0 when generating an ack
[ Upstream commit
8889a711f9b4dcf4dd1330fa493081beebd118c9 ]
ack.bufferSize should be set to 0 when generating an ack.
Fixes:
8d94aa381dab ("rxrpc: Calls shouldn't hold socket refs")
Reported-by: Jeffrey Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Howells [Mon, 3 Oct 2022 06:34:21 +0000 (07:34 +0100)]
net, proc: Provide PROC_FS=n fallback for proc_create_net_single_write()
[ Upstream commit
c3d96f690a790074b508fe183a41e36a00cd7ddd ]
Provide a CONFIG_PROC_FS=n fallback for proc_create_net_single_write().
Also provide a fallback for proc_create_net_data_write().
Fixes:
564def71765c ("proc: Add a way to make network proc files writable")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vladimir Zapolskiy [Mon, 4 Jul 2022 09:44:37 +0000 (10:44 +0100)]
media: camss: Clean up received buffers on failed start of streaming
[ Upstream commit
c8f3582345e6a69da65ab588f7c4c2d1685b0e80 ]
It is required to return the received buffers, if streaming can not be
started. For instance media_pipeline_start() may fail with EPIPE, if
a link validation between entities is not passed, and in such a case
a user gets a kernel warning:
WARNING: CPU: 1 PID: 520 at drivers/media/common/videobuf2/videobuf2-core.c:1592 vb2_start_streaming+0xec/0x160
<snip>
Call trace:
vb2_start_streaming+0xec/0x160
vb2_core_streamon+0x9c/0x1a0
vb2_ioctl_streamon+0x68/0xbc
v4l_streamon+0x30/0x3c
__video_do_ioctl+0x184/0x3e0
video_usercopy+0x37c/0x7b0
video_ioctl2+0x24/0x40
v4l2_ioctl+0x4c/0x70
The fix is to correct the error path in video_start_streaming() of camss.
Fixes:
0ac2586c410f ("media: camss: Add files which handle the video device nodes")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marek Vasut [Fri, 4 Nov 2022 16:33:39 +0000 (17:33 +0100)]
wifi: rsi: Fix handling of 802.3 EAPOL frames sent via control port
[ Upstream commit
b8f6efccbb9dc0ff5dee7e20d69a4747298ee603 ]
When using wpa_supplicant v2.10, this driver is no longer able to
associate with any AP and fails in the EAPOL 4-way handshake while
sending the 2/4 message to the AP. The problem is not present in
wpa_supplicant v2.9 or older. The problem stems from HostAP commit
144314eaa ("wpa_supplicant: Send EAPOL frames over nl80211 where available")
which changes the way EAPOL frames are sent, from them being send
at L2 frames to them being sent via nl80211 control port.
An EAPOL frame sent as L2 frame is passed to the WiFi driver with
skb->protocol ETH_P_PAE, while EAPOL frame sent via nl80211 control
port has skb->protocol set to ETH_P_802_3 . The later happens in
ieee80211_tx_control_port(), where the EAPOL frame is encapsulated
into 802.3 frame.
The rsi_91x driver handles ETH_P_PAE EAPOL frames as high-priority
frames and sends them via highest-priority transmit queue, while
the ETH_P_802_3 frames are sent as regular frames. The EAPOL 4-way
handshake frames must be sent as highest-priority, otherwise the
4-way handshake times out.
Therefore, to fix this problem, inspect the skb control flags and
if flag IEEE80211_TX_CTRL_PORT_CTRL_PROTO is set, assume this is
an EAPOL frame and transmit the frame via high-priority queue just
like other ETH_P_PAE frames.
Fixes:
0eb42586cf87 ("rsi: data packet descriptor enhancements")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221104163339.227432-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Fri, 4 Nov 2022 20:12:38 +0000 (13:12 -0700)]
Input: joystick - fix Kconfig warning for JOYSTICK_ADC
[ Upstream commit
6100a19c4fcfe154dd32f8a8ef4e8c0b1f607c75 ]
Fix a Kconfig warning for JOYSTICK_ADC by also selecting
IIO_BUFFER.
WARNING: unmet direct dependencies detected for IIO_BUFFER_CB
Depends on [n]: IIO [=y] && IIO_BUFFER [=n]
Selected by [y]:
- JOYSTICK_ADC [=y] && INPUT [=y] && INPUT_JOYSTICK [=y] && IIO [=y]
Fixes:
2c2b364fddd5 ("Input: joystick - add ADC attached joystick driver.")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20221104201238.31628-1-rdunlap@infradead.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Xiaoxu [Sat, 22 Oct 2022 12:13:52 +0000 (20:13 +0800)]
mtd: Fix device name leak when register device failed in add_mtd_device()
[ Upstream commit
895d68a39481a75c680aa421546931fb11942fa6 ]
There is a kmemleak when register device failed:
unreferenced object 0xffff888101aab550 (size 8):
comm "insmod", pid 3922, jiffies
4295277753 (age 925.408s)
hex dump (first 8 bytes):
6d 74 64 30 00 88 ff ff mtd0....
backtrace:
[<
00000000bde26724>] __kmalloc_node_track_caller+0x4e/0x150
[<
000000003c32b416>] kvasprintf+0xb0/0x130
[<
000000001f7a8f15>] kobject_set_name_vargs+0x2f/0xb0
[<
000000006e781163>] dev_set_name+0xab/0xe0
[<
00000000e30d0c78>] add_mtd_device+0x4bb/0x700
[<
00000000f3d34de7>] mtd_device_parse_register+0x2ac/0x3f0
[<
00000000c0d88488>] 0xffffffffa0238457
[<
00000000b40d0922>] 0xffffffffa02a008f
[<
0000000023d17b9d>] do_one_initcall+0x87/0x2a0
[<
00000000770f6ca6>] do_init_module+0xdf/0x320
[<
000000007b6768fe>] load_module+0x2f98/0x3330
[<
00000000346bed5a>] __do_sys_finit_module+0x113/0x1b0
[<
00000000674c2290>] do_syscall_64+0x35/0x80
[<
000000004c6a8d97>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
If register device failed, should call put_device() to give up the
reference.
Fixes:
1f24b5a8ecbb ("[MTD] driver model updates")
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20221022121352.2534682-1-zhangxiaoxu5@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Manivannan Sadhasivam [Wed, 2 Nov 2022 09:13:20 +0000 (14:43 +0530)]
clk: qcom: gcc-sm8250: Use retention mode for USB GDSCs
[ Upstream commit
ac1c5a03d3772b1db25e8092f771aa33f6ae2f7e ]
USB controllers on SM8250 doesn't work after coming back from suspend.
This can be fixed by keeping the USB GDSCs in retention mode so that
hardware can keep them ON and put into rentention mode once the parent
domain goes to a low power state.
Fixes:
3e5770921a88 ("clk: qcom: gcc: Add global clock controller driver for SM8250")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221102091320.66007-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrii Nakryiko [Fri, 4 Nov 2022 16:36:45 +0000 (09:36 -0700)]
bpf: propagate precision across all frames, not just the last one
[ Upstream commit
529409ea92d590659be487ba0839710329bd8074 ]
When equivalent completed state is found and it has additional precision
restrictions, BPF verifier propagates precision to
currently-being-verified state chain (i.e., including parent states) so
that if some of the states in the chain are not yet completed, necessary
precision restrictions are enforced.
Unfortunately, right now this happens only for the last frame (deepest
active subprogram's frame), not all the frames. This can lead to
incorrect matching of states due to missing precision marker. Currently
this doesn't seem possible as BPF verifier forces everything to precise
when validated BPF program has any subprograms. But with the next patch
lifting this restriction, this becomes problematic.
In fact, without this fix, we'll start getting failure in one of the
existing test_verifier test cases:
#906/p precise: cross frame pruning FAIL
Unexpected success to load!
verification time 48 usec
stack depth 0+0
processed 26 insns (limit 1000000) max_states_per_insn 3 total_states 17 peak_states 17 mark_read 8
This patch adds precision propagation across all frames.
Fixes:
a3ce685dd01a ("bpf: fix precision tracking")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221104163649.121784-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Martin KaFai Lau [Wed, 22 Sep 2021 00:49:34 +0000 (17:49 -0700)]
bpf: Check the other end of slot_type for STACK_SPILL
[ Upstream commit
27113c59b6d0a587b29ae72d4ff3f832f58b0651 ]
Every 8 bytes of the stack is tracked by a bpf_stack_state.
Within each bpf_stack_state, there is a 'u8 slot_type[8]' to track
the type of each byte. Verifier tests slot_type[0] == STACK_SPILL
to decide if the spilled reg state is saved. Verifier currently only
saves the reg state if the whole 8 bytes are spilled to the stack,
so checking the slot_type[7] is the same as checking slot_type[0].
The later patch will allow verifier to save the bounded scalar
reg also for <8 bytes spill. There is a llvm patch [1] to ensure
the <8 bytes spill will be 8-byte aligned, so checking
slot_type[7] instead of slot_type[0] is required.
While at it, this patch refactors the slot_type[0] == STACK_SPILL
test into a new function is_spilled_reg() and change the
slot_type[0] check to slot_type[7] check in there also.
[1] https://reviews.llvm.org/D109073
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210922004934.624194-1-kafai@fb.com
Stable-dep-of:
529409ea92d5 ("bpf: propagate precision across all frames, not just the last one")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrii Nakryiko [Fri, 4 Nov 2022 16:36:44 +0000 (09:36 -0700)]
bpf: propagate precision in ALU/ALU64 operations
[ Upstream commit
a3b666bfa9c9edc05bca62a87abafe0936bd7f97 ]
When processing ALU/ALU64 operations (apart from BPF_MOV, which is
handled correctly already; and BPF_NEG and BPF_END are special and don't
have source register), if destination register is already marked
precise, this causes problem with potentially missing precision tracking
for the source register. E.g., when we have r1 >>= r5 and r1 is marked
precise, but r5 isn't, this will lead to r5 staying as imprecise. This
is due to the precision backtracking logic stopping early when it sees
r1 is already marked precise. If r1 wasn't precise, we'd keep
backtracking and would add r5 to the set of registers that need to be
marked precise. So there is a discrepancy here which can lead to invalid
and incompatible states matched due to lack of precision marking on r5.
If r1 wasn't precise, precision backtracking would correctly mark both
r1 and r5 as precise.
This is simple to fix, though. During the forward instruction simulation
pass, for arithmetic operations of `scalar <op>= scalar` form (where
<op> is ALU or ALU64 operations), if destination register is already
precise, mark source register as precise. This applies only when both
involved registers are SCALARs. `ptr += scalar` and `scalar += ptr`
cases are already handled correctly.
This does have (negative) effect on some selftest programs and few
Cilium programs. ~/baseline-tmp-results.csv are veristat results with
this patch, while ~/baseline-results.csv is without it. See post
scriptum for instructions on how to make Cilium programs testable with
veristat. Correctness has a price.
$ ./veristat -C -e file,prog,insns,states ~/baseline-results.csv ~/baseline-tmp-results.csv | grep -v '+0'
File Program Total insns (A) Total insns (B) Total insns (DIFF) Total states (A) Total states (B) Total states (DIFF)
----------------------- -------------------- --------------- --------------- ------------------ ---------------- ---------------- -------------------
bpf_cubic.bpf.linked1.o bpf_cubic_cong_avoid 997 1700 +703 (+70.51%) 62 90 +28 (+45.16%)
test_l4lb.bpf.linked1.o balancer_ingress 4559 5469 +910 (+19.96%) 118 126 +8 (+6.78%)
----------------------- -------------------- --------------- --------------- ------------------ ---------------- ---------------- -------------------
$ ./veristat -C -e file,prog,verdict,insns,states ~/baseline-results-cilium.csv ~/baseline-tmp-results-cilium.csv | grep -v '+0'
File Program Total insns (A) Total insns (B) Total insns (DIFF) Total states (A) Total states (B) Total states (DIFF)
------------- ------------------------------ --------------- --------------- ------------------ ---------------- ---------------- -------------------
bpf_host.o tail_nodeport_nat_ingress_ipv6 4448 5261 +813 (+18.28%) 234 247 +13 (+5.56%)
bpf_host.o tail_nodeport_nat_ipv6_egress 3396 3446 +50 (+1.47%) 201 203 +2 (+1.00%)
bpf_lxc.o tail_nodeport_nat_ingress_ipv6 4448 5261 +813 (+18.28%) 234 247 +13 (+5.56%)
bpf_overlay.o tail_nodeport_nat_ingress_ipv6 4448 5261 +813 (+18.28%) 234 247 +13 (+5.56%)
bpf_xdp.o tail_lb_ipv4 71736 73442 +1706 (+2.38%) 4295 4370 +75 (+1.75%)
------------- ------------------------------ --------------- --------------- ------------------ ---------------- ---------------- -------------------
P.S. To make Cilium ([0]) programs libbpf-compatible and thus
veristat-loadable, apply changes from topmost commit in [1], which does
minimal changes to Cilium source code, mostly around SEC() annotations
and BPF map definitions.
[0] https://github.com/cilium/cilium/
[1] https://github.com/anakryiko/cilium/commits/libbpf-friendliness
Fixes:
b5dc0163d8fd ("bpf: precise scalar_value tracking")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221104163649.121784-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Mon, 24 Oct 2022 13:46:50 +0000 (21:46 +0800)]
media: platform: exynos4-is: fix return value check in fimc_md_probe()
[ Upstream commit
e38e42c078da4af962d322b97e726dcb2f184e3f ]
devm_pinctrl_get() may return ERR_PTR(-EPROBE_DEFER), add a minus sign
to fix it.
Fixes:
4163851f7b99 ("[media] s5p-fimc: Use pinctrl API for camera ports configuration")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Liu Shixin [Thu, 27 Oct 2022 12:38:55 +0000 (20:38 +0800)]
media: vivid: fix compose size exceed boundary
[ Upstream commit
94a7ad9283464b75b12516c5512541d467cefcf8 ]
syzkaller found a bug:
BUG: unable to handle page fault for address:
ffffc9000a3b1000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD
100000067 P4D
100000067 PUD
10015f067 PMD
1121ca067 PTE 0
Oops: 0002 [#1] PREEMPT SMP
CPU: 0 PID: 23489 Comm: vivid-000-vid-c Not tainted 6.1.0-rc1+ #512
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:memcpy_erms+0x6/0x10
[...]
Call Trace:
<TASK>
? tpg_fill_plane_buffer+0x856/0x15b0
vivid_fillbuff+0x8ac/0x1110
vivid_thread_vid_cap_tick+0x361/0xc90
vivid_thread_vid_cap+0x21a/0x3a0
kthread+0x143/0x180
ret_from_fork+0x1f/0x30
</TASK>
This is because we forget to check boundary after adjust compose->height
int V4L2_SEL_TGT_CROP case. Add v4l2_rect_map_inside() to fix this problem
for this case.
Fixes:
ef834f7836ec ("[media] vivid: add the video capture and output parts")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kumar Kartikeya Dwivedi [Thu, 3 Nov 2022 19:09:53 +0000 (00:39 +0530)]
bpf: Fix slot type check in check_stack_write_var_off
[ Upstream commit
f5e477a861e4a20d8a1c5f7a245f3a3c3c376b03 ]
For the case where allow_ptr_leaks is false, code is checking whether
slot type is STACK_INVALID and STACK_SPILL and rejecting other cases.
This is a consequence of incorrectly checking for register type instead
of the slot type (NOT_INIT and SCALAR_VALUE respectively). Fix the
check.
Fixes:
01f810ace9ed ("bpf: Allow variable-offset stack access")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221103191013.1236066-5-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Baryshkov [Fri, 26 Aug 2022 09:39:23 +0000 (12:39 +0300)]
drm/msm/hdmi: use devres helper for runtime PM management
[ Upstream commit
b964444b2b64ce182495731d830499d1c588ccf6 ]
Use devm_pm_runtime_enable() to enable runtime PM. This way its effect
will be reverted on device unbind/destruction.
Fixes:
6ed9ed484d04 ("drm/msm/hdmi: Set up runtime PM for HDMI")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/499647/
Link: https://lore.kernel.org/r/20220826093927.851597-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Baryshkov [Thu, 9 Jun 2022 12:23:42 +0000 (15:23 +0300)]
drm/msm/hdmi: drop unused GPIO support
[ Upstream commit
68e674b13b17ed41aac2763d12ece6deaae8df58 ]
The HDMI driver has code to configure extra GPIOs, which predates
pinctrl support. Nowadays all platforms should use pinctrl instead.
Neither of upstreamed Qualcomm platforms uses these properties, so it's
safe to drop them.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/488858/
Link: https://lore.kernel.org/r/20220609122350.3157529-7-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Stable-dep-of:
b964444b2b64 ("drm/msm/hdmi: use devres helper for runtime PM management")
Signed-off-by: Sasha Levin <sashal@kernel.org>
GUO Zihua [Wed, 21 Sep 2022 12:58:04 +0000 (20:58 +0800)]
ima: Handle -ESTALE returned by ima_filter_rule_match()
[ Upstream commit
c7423dbdbc9ecef7fff5239d144cad4b9887f4de ]
IMA relies on the blocking LSM policy notifier callback to update the
LSM based IMA policy rules.
When SELinux update its policies, IMA would be notified and starts
updating all its lsm rules one-by-one. During this time, -ESTALE would
be returned by ima_filter_rule_match() if it is called with a LSM rule
that has not yet been updated. In ima_match_rules(), -ESTALE is not
handled, and the LSM rule is considered a match, causing extra files
to be measured by IMA.
Fix it by re-initializing a temporary rule if -ESTALE is returned by
ima_filter_rule_match(). The origin rule in the rule list would be
updated by the LSM policy notifier callback.
Fixes:
b16942455193 ("ima: use the lsm policy update notifier")
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marek Vasut [Fri, 14 Oct 2022 23:11:06 +0000 (01:11 +0200)]
drm/panel/panel-sitronix-st7701: Remove panel on DSI attach failure
[ Upstream commit
c62102165dd79284d42383d2f7ed17301bd8e629 ]
In case mipi_dsi_attach() fails, call drm_panel_remove() to
avoid memory leak.
Fixes:
849b2e3ff969 ("drm/panel: Add Sitronix ST7701 panel driver")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014231106.468063-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jonathan Neuschäfer [Tue, 1 Nov 2022 17:32:51 +0000 (18:32 +0100)]
spi: Update reference to struct spi_controller
[ Upstream commit
bf585ccee22faf469d82727cf375868105b362f7 ]
struct spi_master has been renamed to struct spi_controller. Update the
reference in spi.rst to make it clickable again.
Fixes:
8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20221101173252.1069294-1-j.neuschaefer@gmx.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marek Vasut [Fri, 28 Oct 2022 11:38:34 +0000 (13:38 +0200)]
clk: renesas: r9a06g032: Repair grave increment error
[ Upstream commit
02693e11611e082e3c4d8653e8af028e43d31164 ]
If condition (clkspec.np != pd->dev.of_node) is true, then the driver
ends up in an endless loop, forever, locking up the machine.
Fixes:
aad03a66f902 ("clk: renesas: r9a06g032: Add clock domain support")
Reviewed-by: Ralph Siemsen <ralph.siemsen@linaro.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Gareth Williams <gareth.williams.jx@renesas.com>
Link: https://lore.kernel.org/r/20221028113834.7496-1-marex@denx.de
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Qilong [Thu, 22 Sep 2022 13:21:07 +0000 (21:21 +0800)]
drm/rockchip: lvds: fix PM usage counter unbalance in poweron
[ Upstream commit
4dba27f1a14592ac4cf71c3bc1cc1fd05dea8015 ]
pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
We fix it by replacing it with the newest pm_runtime_resume_and_get
to keep usage counter balanced.
Fixes:
34cc0aa25456 ("drm/rockchip: Add support for Rockchip Soc LVDS")
Fixes:
cca1705c3d89 ("drm/rockchip: lvds: Add PX30 support")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922132107.105419-3-zhangqilong3@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jimmy Assarsson [Mon, 10 Oct 2022 18:52:37 +0000 (20:52 +0200)]
can: kvaser_usb: Compare requested bittiming parameters with actual parameters in do_set_{,data}_bittiming
[ Upstream commit
39d3df6b0ea80f9b515c632ca07b39b1c156edee ]
The device will respond with a CMD_ERROR_EVENT command, with error_code
KVASER_USB_{LEAF,HYDRA}_ERROR_EVENT_PARAM, if the CMD_SET_BUSPARAMS_REQ
contains invalid bittiming parameters.
However, this command does not contain any channel reference.
To check if the CMD_SET_BUSPARAMS_REQ was successful, redback and compare
the requested bittiming parameters with the device reported parameters.
Fixes:
080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Fixes:
aec5fb2268b7 ("can: kvaser_usb: Add support for Kvaser USB hydra family")
Tested-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Co-developed-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010185237.319219-12-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jimmy Assarsson [Mon, 10 Oct 2022 18:52:36 +0000 (20:52 +0200)]
can: kvaser_usb: Add struct kvaser_usb_busparams
[ Upstream commit
00e5786177649c1e3110f9454fdd34e336597265 ]
Add struct kvaser_usb_busparams containing the busparameters used in
CMD_{SET,GET}_BUSPARAMS* commands.
Tested-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010185237.319219-11-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Stable-dep-of:
39d3df6b0ea8 ("can: kvaser_usb: Compare requested bittiming parameters with actual parameters in do_set_{,data}_bittiming")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anssi Hannula [Mon, 10 Oct 2022 18:52:35 +0000 (20:52 +0200)]
can: kvaser_usb_leaf: Fix bogus restart events
[ Upstream commit
90904d326269a38fe5dd895fb2db7c03199654c4 ]
When auto-restart is enabled, the kvaser_usb_leaf driver considers
transition from any state >= CAN_STATE_BUS_OFF as a bus-off recovery
event (restart).
However, these events may occur at interface startup time before
kvaser_usb_open() has set the state to CAN_STATE_ERROR_ACTIVE, causing
restarts counter to increase and CAN_ERR_RESTARTED to be sent despite no
actual restart having occurred.
Fix that by making the auto-restart condition checks more strict so that
they only trigger when the interface was actually in the BUS_OFF state.
Fixes:
080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010185237.319219-10-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anssi Hannula [Mon, 10 Oct 2022 18:52:33 +0000 (20:52 +0200)]
can: kvaser_usb_leaf: Fix wrong CAN state after stopping
[ Upstream commit
a11249acf802341294557895d8e5f6aef080253f ]
0bfd:0124 Kvaser Mini PCI Express 2xHS FW 4.18.778 sends a
CMD_CHIP_STATE_EVENT indicating bus-off after stopping the device,
causing a stopped device to appear as CAN_STATE_BUS_OFF instead of
CAN_STATE_STOPPED.
Fix that by not handling error events on stopped devices.
Fixes:
080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010185237.319219-8-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anssi Hannula [Mon, 10 Oct 2022 18:52:32 +0000 (20:52 +0200)]
can: kvaser_usb_leaf: Fix improved state not being reported
[ Upstream commit
8d21f5927ae604881f98587fabf6753f88730968 ]
The tested 0bfd:0017 Kvaser Memorator Professional HS/HS FW 2.0.50 and
0bfd:0124 Kvaser Mini PCI Express 2xHS FW 4.18.778 do not seem to send
any unsolicited events when error counters decrease or when the device
transitions from ERROR_PASSIVE to ERROR_ACTIVE (or WARNING).
This causes the interface to e.g. indefinitely stay in the ERROR_PASSIVE
state.
Fix that by asking for chip state (inc. counters) event every 0.5 secs
when error counters are non-zero.
Since there are non-error-counter devices, also always poll in
ERROR_PASSIVE even if the counters show zero.
Fixes:
080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010185237.319219-7-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jimmy Assarsson [Wed, 8 Dec 2021 11:56:05 +0000 (12:56 +0100)]
can: kvaser_usb: make use of units.h in assignment of frequency
[ Upstream commit
b8f91799687eeb6ffe73b66420db46d8c0292295 ]
Use the MEGA define plus the comment /* Hz */ when assigning
frequencies.
Link: https://lore.kernel.org/all/20211210075803.343841-1-mkl@pengutronix.de
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Stable-dep-of:
8d21f5927ae6 ("can: kvaser_usb_leaf: Fix improved state not being reported")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anssi Hannula [Mon, 10 Oct 2022 18:52:31 +0000 (20:52 +0200)]
can: kvaser_usb_leaf: Set Warning state even without bus errors
[ Upstream commit
df1b7af2761b935f63b4a53e789d41ed859edf61 ]
kvaser_usb_leaf_rx_error_update_can_state() sets error state according
to error counters when the hardware does not indicate a specific state
directly.
However, this is currently gated behind a check for
M16C_STATE_BUS_ERROR which does not always seem to be set when error
counters are increasing, and may not be set when error counters are
decreasing.
This causes the CAN_STATE_ERROR_WARNING state to not be set in some
cases even when appropriate.
Change the code to set error state from counters even without
M16C_STATE_BUS_ERROR.
The Error-Passive case seems superfluous as it is already set via
M16C_STATE_BUS_PASSIVE flag above, but it is kept for now.
Tested with 0bfd:0124 Kvaser Mini PCI Express 2xHS FW 4.18.778.
Fixes:
080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010185237.319219-6-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jimmy Assarsson [Mon, 10 Oct 2022 18:52:30 +0000 (20:52 +0200)]
can: kvaser_usb: kvaser_usb_leaf: Handle CMD_ERROR_EVENT
[ Upstream commit
b24cb2d169e0c9dce664a959e1f2aa9781285dc9 ]
The device will send an error event command, to indicate certain errors.
This indicates a misbehaving driver, and should never occur.
Fixes:
080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Co-developed-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010185237.319219-5-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>