Yoshiki Komachi [Tue, 3 Dec 2019 10:40:12 +0000 (19:40 +0900)]
cls_flower: Fix the behavior using port ranges with hw-offload
[ Upstream commit
8ffb055beae58574d3e77b4bf9d4d15eace1ca27 ]
The recent commit
5c72299fba9d ("net: sched: cls_flower: Classify
packets using port ranges") had added filtering based on port ranges
to tc flower. However the commit missed necessary changes in hw-offload
code, so the feature gave rise to generating incorrect offloaded flow
keys in NIC.
One more detailed example is below:
$ tc qdisc add dev eth0 ingress
$ tc filter add dev eth0 ingress protocol ip flower ip_proto tcp \
dst_port 100-200 action drop
With the setup above, an exact match filter with dst_port == 0 will be
installed in NIC by hw-offload. IOW, the NIC will have a rule which is
equivalent to the following one.
$ tc qdisc add dev eth0 ingress
$ tc filter add dev eth0 ingress protocol ip flower ip_proto tcp \
dst_port 0 action drop
The behavior was caused by the flow dissector which extracts packet
data into the flow key in the tc flower. More specifically, regardless
of exact match or specified port ranges, fl_init_dissector() set the
FLOW_DISSECTOR_KEY_PORTS flag in struct flow_dissector to extract port
numbers from skb in skb_flow_dissect() called by fl_classify(). Note
that device drivers received the same struct flow_dissector object as
used in skb_flow_dissect(). Thus, offloaded drivers could not identify
which of these is used because the FLOW_DISSECTOR_KEY_PORTS flag was
set to struct flow_dissector in either case.
This patch adds the new FLOW_DISSECTOR_KEY_PORTS_RANGE flag and the new
tp_range field in struct fl_flow_key to recognize which filters are applied
to offloaded drivers. At this point, when filters based on port ranges
passed to drivers, drivers return the EOPNOTSUPP error because they do
not support the feature (the newly created FLOW_DISSECTOR_KEY_PORTS_RANGE
flag).
Fixes:
5c72299fba9d ("net: sched: cls_flower: Classify packets using port ranges")
Signed-off-by: Yoshiki Komachi <komachi.yoshiki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Hurley [Thu, 5 Dec 2019 17:03:35 +0000 (17:03 +0000)]
net: sched: allow indirect blocks to bind to clsact in TC
[ Upstream commit
25a443f74bcff2c4d506a39eae62fc15ad7c618a ]
When a device is bound to a clsact qdisc, bind events are triggered to
registered drivers for both ingress and egress. However, if a driver
registers to such a device using the indirect block routines then it is
assumed that it is only interested in ingress offload and so only replays
ingress bind/unbind messages.
The NFP driver supports the offload of some egress filters when
registering to a block with qdisc of type clsact. However, on unregister,
if the block is still active, it will not receive an unbind egress
notification which can prevent proper cleanup of other registered
callbacks.
Modify the indirect block callback command in TC to send messages of
ingress and/or egress bind depending on the qdisc in use. NFP currently
supports egress offload for TC flower offload so the changes are only
added to TC.
Fixes:
4d12ba42787b ("nfp: flower: allow offloading of matches on 'internal' ports")
Signed-off-by: John Hurley <john.hurley@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Hurley [Thu, 5 Dec 2019 17:03:34 +0000 (17:03 +0000)]
net: core: rename indirect block ingress cb function
[ Upstream commit
dbad3408896c3c5722ec9cda065468b3df16c5bf ]
With indirect blocks, a driver can register for callbacks from a device
that is does not 'own', for example, a tunnel device. When registering to
or unregistering from a new device, a callback is triggered to generate
a bind/unbind event. This, in turn, allows the driver to receive any
existing rules or to properly clean up installed rules.
When first added, it was assumed that all indirect block registrations
would be for ingress offloads. However, the NFP driver can, in some
instances, support clsact qdisc binds for egress offload.
Change the name of the indirect block callback command in flow_offload to
remove the 'ingress' identifier from it. While this does not change
functionality, a follow up patch will implement a more more generic
callback than just those currently just supporting ingress offload.
Fixes:
4d12ba42787b ("nfp: flower: allow offloading of matches on 'internal' ports")
Signed-off-by: John Hurley <john.hurley@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guillaume Nault [Fri, 6 Dec 2019 11:38:49 +0000 (12:38 +0100)]
tcp: Protect accesses to .ts_recent_stamp with {READ,WRITE}_ONCE()
[ Upstream commit
721c8dafad26ccfa90ff659ee19755e3377b829d ]
Syncookies borrow the ->rx_opt.ts_recent_stamp field to store the
timestamp of the last synflood. Protect them with READ_ONCE() and
WRITE_ONCE() since reads and writes aren't serialised.
Use of .rx_opt.ts_recent_stamp for storing the synflood timestamp was
introduced by
a0f82f64e269 ("syncookies: remove last_synq_overflow from
struct tcp_sock"). But unprotected accesses were already there when
timestamp was stored in .last_synq_overflow.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guillaume Nault [Fri, 6 Dec 2019 11:38:43 +0000 (12:38 +0100)]
tcp: tighten acceptance of ACKs not matching a child socket
[ Upstream commit
cb44a08f8647fd2e8db5cc9ac27cd8355fa392d8 ]
When no synflood occurs, the synflood timestamp isn't updated.
Therefore it can be so old that time_after32() can consider it to be
in the future.
That's a problem for tcp_synq_no_recent_overflow() as it may report
that a recent overflow occurred while, in fact, it's just that jiffies
has grown past 'last_overflow' + TCP_SYNCOOKIE_VALID + 2^31.
Spurious detection of recent overflows lead to extra syncookie
verification in cookie_v[46]_check(). At that point, the verification
should fail and the packet dropped. But we should have dropped the
packet earlier as we didn't even send a syncookie.
Let's refine tcp_synq_no_recent_overflow() to report a recent overflow
only if jiffies is within the
[last_overflow, last_overflow + TCP_SYNCOOKIE_VALID] interval. This
way, no spurious recent overflow is reported when jiffies wraps and
'last_overflow' becomes in the future from the point of view of
time_after32().
However, if jiffies wraps and enters the
[last_overflow, last_overflow + TCP_SYNCOOKIE_VALID] interval (with
'last_overflow' being a stale synflood timestamp), then
tcp_synq_no_recent_overflow() still erroneously reports an
overflow. In such cases, we have to rely on syncookie verification
to drop the packet. We unfortunately have no way to differentiate
between a fresh and a stale syncookie timestamp.
In practice, using last_overflow as lower bound is problematic.
If the synflood timestamp is concurrently updated between the time
we read jiffies and the moment we store the timestamp in
'last_overflow', then 'now' becomes smaller than 'last_overflow' and
tcp_synq_no_recent_overflow() returns true, potentially dropping a
valid syncookie.
Reading jiffies after loading the timestamp could fix the problem,
but that'd require a memory barrier. Let's just accommodate for
potential timestamp growth instead and extend the interval using
'last_overflow - HZ' as lower bound.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guillaume Nault [Fri, 6 Dec 2019 11:38:36 +0000 (12:38 +0100)]
tcp: fix rejected syncookies due to stale timestamps
[ Upstream commit
04d26e7b159a396372646a480f4caa166d1b6720 ]
If no synflood happens for a long enough period of time, then the
synflood timestamp isn't refreshed and jiffies can advance so much
that time_after32() can't accurately compare them any more.
Therefore, we can end up in a situation where time_after32(now,
last_overflow + HZ) returns false, just because these two values are
too far apart. In that case, the synflood timestamp isn't updated as
it should be, which can trick tcp_synq_no_recent_overflow() into
rejecting valid syncookies.
For example, let's consider the following scenario on a system
with HZ=1000:
* The synflood timestamp is 0, either because that's the timestamp
of the last synflood or, more commonly, because we're working with
a freshly created socket.
* We receive a new SYN, which triggers synflood protection. Let's say
that this happens when jiffies ==
2147484649 (that is,
'synflood timestamp' + HZ + 2^31 + 1).
* Then tcp_synq_overflow() doesn't update the synflood timestamp,
because time_after32(
2147484649, 1000) returns false.
With:
-
2147484649: the value of jiffies, aka. 'now'.
- 1000: the value of 'last_overflow' + HZ.
* A bit later, we receive the ACK completing the 3WHS. But
cookie_v[46]_check() rejects it because tcp_synq_no_recent_overflow()
says that we're not under synflood. That's because
time_after32(
2147484649, 120000) returns false.
With:
-
2147484649: the value of jiffies, aka. 'now'.
- 120000: the value of 'last_overflow' + TCP_SYNCOOKIE_VALID.
Of course, in reality jiffies would have increased a bit, but this
condition will last for the next 119 seconds, which is far enough
to accommodate for jiffie's growth.
Fix this by updating the overflow timestamp whenever jiffies isn't
within the [last_overflow, last_overflow + HZ] range. That shouldn't
have any performance impact since the update still happens at most once
per second.
Now we're guaranteed to have fresh timestamps while under synflood, so
tcp_synq_no_recent_overflow() can safely use it with time_after32() in
such situations.
Stale timestamps can still make tcp_synq_no_recent_overflow() return
the wrong verdict when not under synflood. This will be handled in the
next patch.
For 64 bits architectures, the problem was introduced with the
conversion of ->tw_ts_recent_stamp to 32 bits integer by commit
cca9bab1b72c ("tcp: use monotonic timestamps for PAWS").
The problem has always been there on 32 bits architectures.
Fixes:
cca9bab1b72c ("tcp: use monotonic timestamps for PAWS")
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sabrina Dubroca [Wed, 4 Dec 2019 14:35:53 +0000 (15:35 +0100)]
net: ipv6_stub: use ip6_dst_lookup_flow instead of ip6_dst_lookup
[ Upstream commit
6c8991f41546c3c472503dff1ea9daaddf9331c2 ]
ipv6_stub uses the ip6_dst_lookup function to allow other modules to
perform IPv6 lookups. However, this function skips the XFRM layer
entirely.
All users of ipv6_stub->ip6_dst_lookup use ip_route_output_flow (via the
ip_route_output_key and ip_route_output helpers) for their IPv4 lookups,
which calls xfrm_lookup_route(). This patch fixes this inconsistent
behavior by switching the stub to ip6_dst_lookup_flow, which also calls
xfrm_lookup_route().
This requires some changes in all the callers, as these two functions
take different arguments and have different return types.
Fixes:
5f81bd2e5d80 ("ipv6: export a stub for IPv6 symbols used by vxlan")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sabrina Dubroca [Wed, 4 Dec 2019 14:35:52 +0000 (15:35 +0100)]
net: ipv6: add net argument to ip6_dst_lookup_flow
[ Upstream commit
c4e85f73afb6384123e5ef1bba3315b2e3ad031e ]
This will be used in the conversion of ipv6_stub to ip6_dst_lookup_flow,
as some modules currently pass a net argument without a socket to
ip6_dst_lookup. This is equivalent to commit
343d60aada5a ("ipv6: change
ipv6_stub_impl.ipv6_dst_lookup to take net argument").
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Huy Nguyen [Fri, 6 Sep 2019 14:28:46 +0000 (09:28 -0500)]
net/mlx5e: Query global pause state before setting prio2buffer
[ Upstream commit
73e6551699a32fac703ceea09214d6580edcf2d5 ]
When the user changes prio2buffer mapping while global pause is
enabled, mlx5 driver incorrectly sets all active buffers
(buffer that has at least one priority mapped) to lossy.
Solution:
If global pause is enabled, set all the active buffers to lossless
in prio2buffer command.
Also, add error message when buffer size is not enough to meet
xoff threshold.
Fixes:
0696d60853d5 ("net/mlx5e: Receive buffer configuration")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Taehee Yoo [Fri, 6 Dec 2019 05:25:48 +0000 (05:25 +0000)]
tipc: fix ordering of tipc module init and exit routine
[ Upstream commit
9cf1cd8ee3ee09ef2859017df2058e2f53c5347f ]
In order to set/get/dump, the tipc uses the generic netlink
infrastructure. So, when tipc module is inserted, init function
calls genl_register_family().
After genl_register_family(), set/get/dump commands are immediately
allowed and these callbacks internally use the net_generic.
net_generic is allocated by register_pernet_device() but this
is called after genl_register_family() in the __init function.
So, these callbacks would use un-initialized net_generic.
Test commands:
#SHELL1
while :
do
modprobe tipc
modprobe -rv tipc
done
#SHELL2
while :
do
tipc link list
done
Splat looks like:
[ 59.616322][ T2788] kasan: CONFIG_KASAN_INLINE enabled
[ 59.617234][ T2788] kasan: GPF could be caused by NULL-ptr deref or user memory access
[ 59.618398][ T2788] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[ 59.619389][ T2788] CPU: 3 PID: 2788 Comm: tipc Not tainted 5.4.0+ #194
[ 59.620231][ T2788] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 59.621428][ T2788] RIP: 0010:tipc_bcast_get_broadcast_mode+0x131/0x310 [tipc]
[ 59.622379][ T2788] Code: c7 c6 ef 8b 38 c0 65 ff 0d 84 83 c9 3f e8 d7 a5 f2 e3 48 8d bb 38 11 00 00 48 b8 00 00 00 00
[ 59.622550][ T2780] NET: Registered protocol family 30
[ 59.624627][ T2788] RSP: 0018:
ffff88804b09f578 EFLAGS:
00010202
[ 59.624630][ T2788] RAX:
dffffc0000000000 RBX:
0000000000000011 RCX:
000000008bc66907
[ 59.624631][ T2788] RDX:
0000000000000229 RSI:
000000004b3cf4cc RDI:
0000000000001149
[ 59.624633][ T2788] RBP:
ffff88804b09f588 R08:
0000000000000003 R09:
fffffbfff4fb3df1
[ 59.624635][ T2788] R10:
fffffbfff50318f8 R11:
ffff888066cadc18 R12:
ffffffffa6cc2f40
[ 59.624637][ T2788] R13:
1ffff11009613eba R14:
ffff8880662e9328 R15:
ffff8880662e9328
[ 59.624639][ T2788] FS:
00007f57d8f7b740(0000) GS:
ffff88806cc00000(0000) knlGS:
0000000000000000
[ 59.624645][ T2788] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 59.625875][ T2780] tipc: Started in single node mode
[ 59.626128][ T2788] CR2:
00007f57d887a8c0 CR3:
000000004b140002 CR4:
00000000000606e0
[ 59.633991][ T2788] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 59.635195][ T2788] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 59.636478][ T2788] Call Trace:
[ 59.637025][ T2788] tipc_nl_add_bc_link+0x179/0x1470 [tipc]
[ 59.638219][ T2788] ? lock_downgrade+0x6e0/0x6e0
[ 59.638923][ T2788] ? __tipc_nl_add_link+0xf90/0xf90 [tipc]
[ 59.639533][ T2788] ? tipc_nl_node_dump_link+0x318/0xa50 [tipc]
[ 59.640160][ T2788] ? mutex_lock_io_nested+0x1380/0x1380
[ 59.640746][ T2788] tipc_nl_node_dump_link+0x4fd/0xa50 [tipc]
[ 59.641356][ T2788] ? tipc_nl_node_reset_link_stats+0x340/0x340 [tipc]
[ 59.642088][ T2788] ? __skb_ext_del+0x270/0x270
[ 59.642594][ T2788] genl_lock_dumpit+0x85/0xb0
[ 59.643050][ T2788] netlink_dump+0x49c/0xed0
[ 59.643529][ T2788] ? __netlink_sendskb+0xc0/0xc0
[ 59.644044][ T2788] ? __netlink_dump_start+0x190/0x800
[ 59.644617][ T2788] ? __mutex_unlock_slowpath+0xd0/0x670
[ 59.645177][ T2788] __netlink_dump_start+0x5a0/0x800
[ 59.645692][ T2788] genl_rcv_msg+0xa75/0xe90
[ 59.646144][ T2788] ? __lock_acquire+0xdfe/0x3de0
[ 59.646692][ T2788] ? genl_family_rcv_msg_attrs_parse+0x320/0x320
[ 59.647340][ T2788] ? genl_lock_dumpit+0xb0/0xb0
[ 59.647821][ T2788] ? genl_unlock+0x20/0x20
[ 59.648290][ T2788] ? genl_parallel_done+0xe0/0xe0
[ 59.648787][ T2788] ? find_held_lock+0x39/0x1d0
[ 59.649276][ T2788] ? genl_rcv+0x15/0x40
[ 59.649722][ T2788] ? lock_contended+0xcd0/0xcd0
[ 59.650296][ T2788] netlink_rcv_skb+0x121/0x350
[ 59.650828][ T2788] ? genl_family_rcv_msg_attrs_parse+0x320/0x320
[ 59.651491][ T2788] ? netlink_ack+0x940/0x940
[ 59.651953][ T2788] ? lock_acquire+0x164/0x3b0
[ 59.652449][ T2788] genl_rcv+0x24/0x40
[ 59.652841][ T2788] netlink_unicast+0x421/0x600
[ ... ]
Fixes:
7e4369057806 ("tipc: fix a slab object leak")
Fixes:
a62fbccecd62 ("tipc: make subscriber server support net namespace")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Thu, 5 Dec 2019 18:10:15 +0000 (10:10 -0800)]
tcp: md5: fix potential overestimation of TCP option space
[ Upstream commit
9424e2e7ad93ffffa88f882c9bc5023570904b55 ]
Back in 2008, Adam Langley fixed the corner case of packets for flows
having all of the following options : MD5 TS SACK
Since MD5 needs 20 bytes, and TS needs 12 bytes, no sack block
can be cooked from the remaining 8 bytes.
tcp_established_options() correctly sets opts->num_sack_blocks
to zero, but returns 36 instead of 32.
This means TCP cooks packets with 4 extra bytes at the end
of options, containing unitialized bytes.
Fixes:
33ad798c924b ("tcp: options clean up")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aaron Conole [Tue, 3 Dec 2019 21:34:13 +0000 (16:34 -0500)]
openvswitch: support asymmetric conntrack
[ Upstream commit
5d50aa83e2c8e91ced2cca77c198b468ca9210f4 ]
The openvswitch module shares a common conntrack and NAT infrastructure
exposed via netfilter. It's possible that a packet needs both SNAT and
DNAT manipulation, due to e.g. tuple collision. Netfilter can support
this because it runs through the NAT table twice - once on ingress and
again after egress. The openvswitch module doesn't have such capability.
Like netfilter hook infrastructure, we should run through NAT twice to
keep the symmetry.
Fixes:
05752523e565 ("openvswitch: Interface with NAT.")
Signed-off-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Valentin Vidic [Thu, 5 Dec 2019 06:41:18 +0000 (07:41 +0100)]
net/tls: Fix return values to avoid ENOTSUPP
[ Upstream commit
4a5cdc604b9cf645e6fa24d8d9f055955c3c8516 ]
ENOTSUPP is not available in userspace, for example:
setsockopt failed, 524, Unknown error 524
Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mian Yousaf Kaukab [Thu, 5 Dec 2019 09:41:16 +0000 (10:41 +0100)]
net: thunderx: start phy before starting autonegotiation
[ Upstream commit
a350d2e7adbb57181d33e3aa6f0565632747feaa ]
Since commit
2b3e88ea6528 ("net: phy: improve phy state checking")
phy_start_aneg() expects phy state to be >= PHY_UP. Call phy_start()
before calling phy_start_aneg() during probe so that autonegotiation
is initiated.
As phy_start() takes care of calling phy_start_aneg(), drop the explicit
call to phy_start_aneg().
Network fails without this patch on Octeon TX.
Fixes:
2b3e88ea6528 ("net: phy: improve phy state checking")
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Sat, 7 Dec 2019 19:34:45 +0000 (11:34 -0800)]
net_sched: validate TCA_KIND attribute in tc_chain_tmplt_add()
[ Upstream commit
2dd5616ecdcebdf5a8d007af64e040d4e9214efe ]
Use the new tcf_proto_check_kind() helper to make sure user
provided value is well formed.
BUG: KMSAN: uninit-value in string_nocheck lib/vsprintf.c:606 [inline]
BUG: KMSAN: uninit-value in string+0x4be/0x600 lib/vsprintf.c:668
CPU: 0 PID: 12358 Comm: syz-executor.1 Not tainted 5.4.0-rc8-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c9/0x220 lib/dump_stack.c:118
kmsan_report+0x128/0x220 mm/kmsan/kmsan_report.c:108
__msan_warning+0x64/0xc0 mm/kmsan/kmsan_instr.c:245
string_nocheck lib/vsprintf.c:606 [inline]
string+0x4be/0x600 lib/vsprintf.c:668
vsnprintf+0x218f/0x3210 lib/vsprintf.c:2510
__request_module+0x2b1/0x11c0 kernel/kmod.c:143
tcf_proto_lookup_ops+0x171/0x700 net/sched/cls_api.c:139
tc_chain_tmplt_add net/sched/cls_api.c:2730 [inline]
tc_ctl_chain+0x1904/0x38a0 net/sched/cls_api.c:2850
rtnetlink_rcv_msg+0x115a/0x1580 net/core/rtnetlink.c:5224
netlink_rcv_skb+0x431/0x620 net/netlink/af_netlink.c:2477
rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:5242
netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
netlink_unicast+0xf3e/0x1020 net/netlink/af_netlink.c:1328
netlink_sendmsg+0x110f/0x1330 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:637 [inline]
sock_sendmsg net/socket.c:657 [inline]
___sys_sendmsg+0x14ff/0x1590 net/socket.c:2311
__sys_sendmsg net/socket.c:2356 [inline]
__do_sys_sendmsg net/socket.c:2365 [inline]
__se_sys_sendmsg+0x305/0x460 net/socket.c:2363
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2363
do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45a649
Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:
00007f0790795c78 EFLAGS:
00000246 ORIG_RAX:
000000000000002e
RAX:
ffffffffffffffda RBX:
0000000000000003 RCX:
000000000045a649
RDX:
0000000000000000 RSI:
0000000020000300 RDI:
0000000000000006
RBP:
000000000075bfc8 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
00007f07907966d4
R13:
00000000004c8db5 R14:
00000000004df630 R15:
00000000ffffffff
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:149 [inline]
kmsan_internal_poison_shadow+0x5c/0x110 mm/kmsan/kmsan.c:132
kmsan_slab_alloc+0x97/0x100 mm/kmsan/kmsan_hooks.c:86
slab_alloc_node mm/slub.c:2773 [inline]
__kmalloc_node_track_caller+0xe27/0x11a0 mm/slub.c:4381
__kmalloc_reserve net/core/skbuff.c:141 [inline]
__alloc_skb+0x306/0xa10 net/core/skbuff.c:209
alloc_skb include/linux/skbuff.h:1049 [inline]
netlink_alloc_large_skb net/netlink/af_netlink.c:1174 [inline]
netlink_sendmsg+0x783/0x1330 net/netlink/af_netlink.c:1892
sock_sendmsg_nosec net/socket.c:637 [inline]
sock_sendmsg net/socket.c:657 [inline]
___sys_sendmsg+0x14ff/0x1590 net/socket.c:2311
__sys_sendmsg net/socket.c:2356 [inline]
__do_sys_sendmsg net/socket.c:2365 [inline]
__se_sys_sendmsg+0x305/0x460 net/socket.c:2363
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2363
do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes:
6f96c3c6904c ("net_sched: fix backward compatibility for TCA_KIND")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dust Li [Tue, 3 Dec 2019 03:17:40 +0000 (11:17 +0800)]
net: sched: fix dump qlen for sch_mq/sch_mqprio with NOLOCK subqueues
[ Upstream commit
2f23cd42e19c22c24ff0e221089b7b6123b117c5 ]
sch->q.len hasn't been set if the subqueue is a NOLOCK qdisc
in mq_dump() and mqprio_dump().
Fixes:
ce679e8df7ed ("net: sched: add support for TCQ_F_NOLOCK subqueues to sch_mqprio")
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Grygorii Strashko [Fri, 6 Dec 2019 12:28:20 +0000 (14:28 +0200)]
net: ethernet: ti: cpsw: fix extra rx interrupt
[ Upstream commit
51302f77bedab8768b761ed1899c08f89af9e4e2 ]
Now RX interrupt is triggered twice every time, because in
cpsw_rx_interrupt() it is asked first and then disabled. So there will be
pending interrupt always, when RX interrupt is enabled again in NAPI
handler.
Fix it by first disabling IRQ and then do ask.
Fixes:
870915feabdc ("drivers: net: cpsw: remove disable_irq/enable_irq as irq can be masked from cpsw itself")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Lobakin [Thu, 5 Dec 2019 10:02:35 +0000 (13:02 +0300)]
net: dsa: fix flow dissection on Tx path
[ Upstream commit
8bef0af09a5415df761b04fa487a6c34acae74bc ]
Commit
43e665287f93 ("net-next: dsa: fix flow dissection") added an
ability to override protocol and network offset during flow dissection
for DSA-enabled devices (i.e. controllers shipped as switch CPU ports)
in order to fix skb hashing for RPS on Rx path.
However, skb_hash() and added part of code can be invoked not only on
Rx, but also on Tx path if we have a multi-queued device and:
- kernel is running on UP system or
- XPS is not configured.
The call stack in this two cases will be like: dev_queue_xmit() ->
__dev_queue_xmit() -> netdev_core_pick_tx() -> netdev_pick_tx() ->
skb_tx_hash() -> skb_get_hash().
The problem is that skbs queued for Tx have both network offset and
correct protocol already set up even after inserting a CPU tag by DSA
tagger, so calling tag_ops->flow_dissect() on this path actually only
breaks flow dissection and hashing.
This can be observed by adding debug prints just before and right after
tag_ops->flow_dissect() call to the related block of code:
Before the patch:
Rx path (RPS):
[ 19.240001] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */
[ 19.244271] tag_ops->flow_dissect()
[ 19.247811] Rx: proto: 0x0800, nhoff: 8 /* ETH_P_IP */
[ 19.215435] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */
[ 19.219746] tag_ops->flow_dissect()
[ 19.223241] Rx: proto: 0x0806, nhoff: 8 /* ETH_P_ARP */
[ 18.654057] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */
[ 18.658332] tag_ops->flow_dissect()
[ 18.661826] Rx: proto: 0x8100, nhoff: 8 /* ETH_P_8021Q */
Tx path (UP system):
[ 18.759560] Tx: proto: 0x0800, nhoff: 26 /* ETH_P_IP */
[ 18.763933] tag_ops->flow_dissect()
[ 18.767485] Tx: proto: 0x920b, nhoff: 34 /* junk */
[ 22.800020] Tx: proto: 0x0806, nhoff: 26 /* ETH_P_ARP */
[ 22.804392] tag_ops->flow_dissect()
[ 22.807921] Tx: proto: 0x920b, nhoff: 34 /* junk */
[ 16.898342] Tx: proto: 0x86dd, nhoff: 26 /* ETH_P_IPV6 */
[ 16.902705] tag_ops->flow_dissect()
[ 16.906227] Tx: proto: 0x920b, nhoff: 34 /* junk */
After:
Rx path (RPS):
[ 16.520993] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */
[ 16.525260] tag_ops->flow_dissect()
[ 16.528808] Rx: proto: 0x0800, nhoff: 8 /* ETH_P_IP */
[ 15.484807] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */
[ 15.490417] tag_ops->flow_dissect()
[ 15.495223] Rx: proto: 0x0806, nhoff: 8 /* ETH_P_ARP */
[ 17.134621] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */
[ 17.138895] tag_ops->flow_dissect()
[ 17.142388] Rx: proto: 0x8100, nhoff: 8 /* ETH_P_8021Q */
Tx path (UP system):
[ 15.499558] Tx: proto: 0x0800, nhoff: 26 /* ETH_P_IP */
[ 20.664689] Tx: proto: 0x0806, nhoff: 26 /* ETH_P_ARP */
[ 18.565782] Tx: proto: 0x86dd, nhoff: 26 /* ETH_P_IPV6 */
In order to fix that we can add the check 'proto == htons(ETH_P_XDSA)'
to prevent code from calling tag_ops->flow_dissect() on Tx.
I also decided to initialize 'offset' variable so tagger callbacks can
now safely leave it untouched without provoking a chaos.
Fixes:
43e665287f93 ("net-next: dsa: fix flow dissection")
Signed-off-by: Alexander Lobakin <alobakin@dlink.ru>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nikolay Aleksandrov [Tue, 3 Dec 2019 14:48:06 +0000 (16:48 +0200)]
net: bridge: deny dev_set_mac_address() when unregistering
[ Upstream commit
c4b4c421857dc7b1cf0dccbd738472360ff2cd70 ]
We have an interesting memory leak in the bridge when it is being
unregistered and is a slave to a master device which would change the
mac of its slaves on unregister (e.g. bond, team). This is a very
unusual setup but we do end up leaking 1 fdb entry because
dev_set_mac_address() would cause the bridge to insert the new mac address
into its table after all fdbs are flushed, i.e. after dellink() on the
bridge has finished and we call NETDEV_UNREGISTER the bond/team would
release it and will call dev_set_mac_address() to restore its original
address and that in turn will add an fdb in the bridge.
One fix is to check for the bridge dev's reg_state in its
ndo_set_mac_address callback and return an error if the bridge is not in
NETREG_REGISTERED.
Easy steps to reproduce:
1. add bond in mode != A/B
2. add any slave to the bond
3. add bridge dev as a slave to the bond
4. destroy the bridge device
Trace:
unreferenced object 0xffff888035c4d080 (size 128):
comm "ip", pid 4068, jiffies
4296209429 (age 1413.753s)
hex dump (first 32 bytes):
41 1d c9 36 80 88 ff ff 00 00 00 00 00 00 00 00 A..6............
d2 19 c9 5e 3f d7 00 00 00 00 00 00 00 00 00 00 ...^?...........
backtrace:
[<
00000000ddb525dc>] kmem_cache_alloc+0x155/0x26f
[<
00000000633ff1e0>] fdb_create+0x21/0x486 [bridge]
[<
0000000092b17e9c>] fdb_insert+0x91/0xdc [bridge]
[<
00000000f2a0f0ff>] br_fdb_change_mac_address+0xb3/0x175 [bridge]
[<
000000001de02dbd>] br_stp_change_bridge_id+0xf/0xff [bridge]
[<
00000000ac0e32b1>] br_set_mac_address+0x76/0x99 [bridge]
[<
000000006846a77f>] dev_set_mac_address+0x63/0x9b
[<
00000000d30738fc>] __bond_release_one+0x3f6/0x455 [bonding]
[<
00000000fc7ec01d>] bond_netdev_event+0x2f2/0x400 [bonding]
[<
00000000305d7795>] notifier_call_chain+0x38/0x56
[<
0000000028885d4a>] call_netdevice_notifiers+0x1e/0x23
[<
000000008279477b>] rollback_registered_many+0x353/0x6a4
[<
0000000018ef753a>] unregister_netdevice_many+0x17/0x6f
[<
00000000ba854b7a>] rtnl_delete_link+0x3c/0x43
[<
00000000adf8618d>] rtnl_dellink+0x1dc/0x20a
[<
000000009b6395fd>] rtnetlink_rcv_msg+0x23d/0x268
Fixes:
43598813386f ("bridge: add local MAC address to forwarding table (v2)")
Reported-by: syzbot+2add91c08eb181fea1bf@syzkaller.appspotmail.com
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vladyslav Tarasiuk [Fri, 6 Dec 2019 13:51:05 +0000 (13:51 +0000)]
mqprio: Fix out-of-bounds access in mqprio_dump
[ Upstream commit
9f104c7736904ac72385bbb48669e0c923ca879b ]
When user runs a command like
tc qdisc add dev eth1 root mqprio
KASAN stack-out-of-bounds warning is emitted.
Currently, NLA_ALIGN macro used in mqprio_dump provides too large
buffer size as argument for nla_put and memcpy down the call stack.
The flow looks like this:
1. nla_put expects exact object size as an argument;
2. Later it provides this size to memcpy;
3. To calculate correct padding for SKB, nla_put applies NLA_ALIGN
macro itself.
Therefore, NLA_ALIGN should not be applied to the nla_put parameter.
Otherwise it will lead to out-of-bounds memory access in memcpy.
Fixes:
4e8b86c06269 ("mqprio: Introduce new hardware offload mode and shaper in mqprio")
Signed-off-by: Vladyslav Tarasiuk <vladyslavt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Fri, 6 Dec 2019 04:43:46 +0000 (20:43 -0800)]
inet: protect against too small mtu values.
[ Upstream commit
501a90c945103e8627406763dac418f20f3837b2 ]
syzbot was once again able to crash a host by setting a very small mtu
on loopback device.
Let's make inetdev_valid_mtu() available in include/net/ip.h,
and use it in ip_setup_cork(), so that we protect both ip_append_page()
and __ip_append_data()
Also add a READ_ONCE() when the device mtu is read.
Pairs this lockless read with one WRITE_ONCE() in __dev_set_mtu(),
even if other code paths might write over this field.
Add a big comment in include/linux/netdevice.h about dev->mtu
needing READ_ONCE()/WRITE_ONCE() annotations.
Hopefully we will add the missing ones in followup patches.
[1]
refcount_t: saturated; leaking memory.
WARNING: CPU: 0 PID: 9464 at lib/refcount.c:22 refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 9464 Comm: syz-executor850 Not tainted 5.4.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x197/0x210 lib/dump_stack.c:118
panic+0x2e3/0x75c kernel/panic.c:221
__warn.cold+0x2f/0x3e kernel/panic.c:582
report_bug+0x289/0x300 lib/bug.c:195
fixup_bug arch/x86/kernel/traps.c:174 [inline]
fixup_bug arch/x86/kernel/traps.c:169 [inline]
do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:267
do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:286
invalid_op+0x23/0x30 arch/x86/entry/entry_64.S:1027
RIP: 0010:refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22
Code: 06 31 ff 89 de e8 c8 f5 e6 fd 84 db 0f 85 6f ff ff ff e8 7b f4 e6 fd 48 c7 c7 e0 71 4f 88 c6 05 56 a6 a4 06 01 e8 c7 a8 b7 fd <0f> 0b e9 50 ff ff ff e8 5c f4 e6 fd 0f b6 1d 3d a6 a4 06 31 ff 89
RSP: 0018:
ffff88809689f550 EFLAGS:
00010286
RAX:
0000000000000000 RBX:
0000000000000000 RCX:
0000000000000000
RDX:
0000000000000000 RSI:
ffffffff815e4336 RDI:
ffffed1012d13e9c
RBP:
ffff88809689f560 R08:
ffff88809c50a3c0 R09:
fffffbfff15d31b1
R10:
fffffbfff15d31b0 R11:
ffffffff8ae98d87 R12:
0000000000000001
R13:
0000000000040100 R14:
ffff888099041104 R15:
ffff888218d96e40
refcount_add include/linux/refcount.h:193 [inline]
skb_set_owner_w+0x2b6/0x410 net/core/sock.c:1999
sock_wmalloc+0xf1/0x120 net/core/sock.c:2096
ip_append_page+0x7ef/0x1190 net/ipv4/ip_output.c:1383
udp_sendpage+0x1c7/0x480 net/ipv4/udp.c:1276
inet_sendpage+0xdb/0x150 net/ipv4/af_inet.c:821
kernel_sendpage+0x92/0xf0 net/socket.c:3794
sock_sendpage+0x8b/0xc0 net/socket.c:936
pipe_to_sendpage+0x2da/0x3c0 fs/splice.c:458
splice_from_pipe_feed fs/splice.c:512 [inline]
__splice_from_pipe+0x3ee/0x7c0 fs/splice.c:636
splice_from_pipe+0x108/0x170 fs/splice.c:671
generic_splice_sendpage+0x3c/0x50 fs/splice.c:842
do_splice_from fs/splice.c:861 [inline]
direct_splice_actor+0x123/0x190 fs/splice.c:1035
splice_direct_to_actor+0x3b4/0xa30 fs/splice.c:990
do_splice_direct+0x1da/0x2a0 fs/splice.c:1078
do_sendfile+0x597/0xd00 fs/read_write.c:1464
__do_sys_sendfile64 fs/read_write.c:1525 [inline]
__se_sys_sendfile64 fs/read_write.c:1511 [inline]
__x64_sys_sendfile64+0x1dd/0x220 fs/read_write.c:1511
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x441409
Code: e8 ac e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:
00007fffb64c4f78 EFLAGS:
00000246 ORIG_RAX:
0000000000000028
RAX:
ffffffffffffffda RBX:
0000000000000000 RCX:
0000000000441409
RDX:
0000000000000000 RSI:
0000000000000006 RDI:
0000000000000005
RBP:
0000000000073b8a R08:
0000000000000010 R09:
0000000000000010
R10:
0000000000010001 R11:
0000000000000246 R12:
0000000000402180
R13:
0000000000402210 R14:
0000000000000000 R15:
0000000000000000
Kernel Offset: disabled
Rebooting in 86400 seconds..
Fixes:
1470ddf7f8ce ("inet: Remove explicit write references to sk/inet in ip_append_data")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 17 Dec 2019 18:56:55 +0000 (19:56 +0100)]
Linux 5.4.4
Robert Richter [Thu, 21 Nov 2019 21:36:57 +0000 (21:36 +0000)]
EDAC/ghes: Do not warn when incrementing refcount on 0
[ Upstream commit
16214bd9e43a31683a7073664b000029bba00354 ]
The following warning from the refcount framework is seen during ghes
initialization:
EDAC MC0: Giving out device to module ghes_edac.c controller ghes_edac: DEV ghes (INTERRUPT)
------------[ cut here ]------------
refcount_t: increment on 0; use-after-free.
WARNING: CPU: 36 PID: 1 at lib/refcount.c:156 refcount_inc_checked
[...]
Call trace:
refcount_inc_checked
ghes_edac_register
ghes_probe
...
It warns if the refcount is incremented from zero. This warning is
reasonable as a kernel object is typically created with a refcount of
one and freed once the refcount is zero. Afterwards the object would be
"used-after-free".
For GHES, the refcount is initialized with zero, and that is why this
message is seen when initializing the first instance. However, whenever
the refcount is zero, the device will be allocated and registered. Since
the ghes_reg_mutex protects the refcount and serializes allocation and
freeing of ghes devices, a use-after-free cannot happen here.
Instead of using refcount_inc() for the first instance, use
refcount_set(). This can be used here because the refcount is zero at
this point and can not change due to its protection by the mutex.
Fixes:
23f61b9fc5cc ("EDAC/ghes: Fix locking and memory barrier issues")
Reported-by: John Garry <john.garry@huawei.com>
Signed-off-by: Robert Richter <rrichter@marvell.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: John Garry <john.garry@huawei.com>
Cc: <huangming23@huawei.com>
Cc: James Morse <james.morse@arm.com>
Cc: <linuxarm@huawei.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: <tanxiaofei@huawei.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: <wanghuiqiang@huawei.com>
Link: https://lkml.kernel.org/r/20191121213628.21244-1-rrichter@marvell.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Heiner Kallweit [Sat, 7 Dec 2019 21:21:52 +0000 (22:21 +0100)]
r8169: fix rtl_hw_jumbo_disable for RTL8168evl
[ Upstream commit
0fc75219fe9a3c90631453e9870e4f6d956f0ebc ]
In referenced fix we removed the RTL8168e-specific jumbo config for
RTL8168evl in rtl_hw_jumbo_enable(). We have to do the same in
rtl_hw_jumbo_disable().
v2: fix referenced commit id
Fixes:
14012c9f3bb9 ("r8169: fix jumbo configuration for RTL8168evl")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tejun Heo [Fri, 20 Sep 2019 20:39:57 +0000 (13:39 -0700)]
workqueue: Fix missing kfree(rescuer) in destroy_workqueue()
commit
8efe1223d73c218ce7e8b2e0e9aadb974b582d7f upstream.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Qian Cai <cai@lca.pw>
Fixes:
def98c84b6cd ("workqueue: Fix spurious sanity check failures in destroy_workqueue()")
Cc: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ming Lei [Mon, 4 Nov 2019 08:26:53 +0000 (16:26 +0800)]
blk-mq: make sure that line break can be printed
commit
d2c9be89f8ebe7ebcc97676ac40f8dec1cf9b43a upstream.
8962842ca5ab ("blk-mq: avoid sysfs buffer overflow with too many CPU cores")
avoids sysfs buffer overflow, and reserves one character for line break.
However, the last snprintf() doesn't get correct 'size' parameter passed
in, so fixed it.
Fixes:
8962842ca5ab ("blk-mq: avoid sysfs buffer overflow with too many CPU cores")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cc: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kara [Fri, 8 Nov 2019 11:45:11 +0000 (12:45 +0100)]
ext4: fix leak of quota reservations
commit
f4c2d372b89a1e504ebb7b7eb3e29b8306479366 upstream.
Commit
8fcc3a580651 ("ext4: rework reserved cluster accounting when
invalidating pages") moved freeing of delayed allocation reservations
from dirty page invalidation time to time when we evict corresponding
status extent from extent status tree. For inodes which don't have any
blocks allocated this may actually happen only in ext4_clear_blocks()
which is after we've dropped references to quota structures from the
inode. Thus reservation of quota leaked. Fix the problem by clearing
quota information from the inode only after evicting extent status tree
in ext4_clear_inode().
Link: https://lore.kernel.org/r/20191108115420.GI20863@quack2.suse.cz
Reported-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Fixes:
8fcc3a580651 ("ext4: rework reserved cluster accounting when invalidating pages")
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
yangerkun [Thu, 19 Sep 2019 06:35:08 +0000 (14:35 +0800)]
ext4: fix a bug in ext4_wait_for_tail_page_commit
commit
565333a1554d704789e74205989305c811fd9c7a upstream.
No need to wait for any commit once the page is fully truncated.
Besides, it may confuse e.g. concurrent ext4_writepage() with the page
still be dirty (will be cleared by truncate_pagecache() in
ext4_setattr()) but buffers has been freed; and then trigger a bug
show as below:
[ 26.057508] ------------[ cut here ]------------
[ 26.058531] kernel BUG at fs/ext4/inode.c:2134!
...
[ 26.088130] Call trace:
[ 26.088695] ext4_writepage+0x914/0xb28
[ 26.089541] writeout.isra.4+0x1b4/0x2b8
[ 26.090409] move_to_new_page+0x3b0/0x568
[ 26.091338] __unmap_and_move+0x648/0x988
[ 26.092241] unmap_and_move+0x48c/0xbb8
[ 26.093096] migrate_pages+0x220/0xb28
[ 26.093945] kernel_mbind+0x828/0xa18
[ 26.094791] __arm64_sys_mbind+0xc8/0x138
[ 26.095716] el0_svc_common+0x190/0x490
[ 26.096571] el0_svc_handler+0x60/0xd0
[ 26.097423] el0_svc+0x8/0xc
Run the procedure (generate by syzkaller) parallel with ext3.
void main()
{
int fd, fd1, ret;
void *addr;
size_t length = 4096;
int flags;
off_t offset = 0;
char *str = "12345";
fd = open("a", O_RDWR | O_CREAT);
assert(fd >= 0);
/* Truncate to 4k */
ret = ftruncate(fd, length);
assert(ret == 0);
/* Journal data mode */
flags = 0xc00f;
ret = ioctl(fd, _IOW('f', 2, long), &flags);
assert(ret == 0);
/* Truncate to 0 */
fd1 = open("a", O_TRUNC | O_NOATIME);
assert(fd1 >= 0);
addr = mmap(NULL, length, PROT_WRITE | PROT_READ,
MAP_SHARED, fd, offset);
assert(addr != (void *)-1);
memcpy(addr, str, 5);
mbind(addr, length, 0, 0, 0, MPOL_MF_MOVE);
}
And the bug will be triggered once we seen the below order.
reproduce1 reproduce2
... | ...
truncate to 4k |
change to journal data mode |
| memcpy(set page dirty)
truncate to 0: |
ext4_setattr: |
... |
ext4_wait_for_tail_page_commit |
| mbind(trigger bug)
truncate_pagecache(clean dirty)| ...
... |
mbind will call ext4_writepage() since the page still be dirty, and then
report the bug since the buffers has been free. Fix it by return
directly once offset equals to 0 which means the page has been fully
truncated.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: yangerkun <yangerkun@huawei.com>
Link: https://lore.kernel.org/r/20190919063508.1045-1-yangerkun@huawei.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Darrick J. Wong [Tue, 15 Oct 2019 15:44:32 +0000 (08:44 -0700)]
splice: only read in as much information as there is pipe buffer space
commit
3253d9d093376d62b4a56e609f15d2ec5085ac73 upstream.
Andreas Grünbacher reports that on the two filesystems that support
iomap directio, it's possible for splice() to return -EAGAIN (instead of
a short splice) if the pipe being written to has less space available in
its pipe buffers than the length supplied by the calling process.
Months ago we fixed splice_direct_to_actor to clamp the length of the
read request to the size of the splice pipe. Do the same to do_splice.
Fixes:
17614445576b6 ("splice: don't read more than available pipe space")
Reported-by: syzbot+3c01db6025f26530cf8d@syzkaller.appspotmail.com
Reported-by: Andreas Grünbacher <andreas.gruenbacher@gmail.com>
Reviewed-by: Andreas Grünbacher <andreas.gruenbacher@gmail.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexandre Belloni [Sun, 20 Oct 2019 23:13:20 +0000 (01:13 +0200)]
rtc: disable uie before setting time and enable after
commit
7e7c005b4b1f1f169bcc4b2c3a40085ecc663df2 upstream.
When setting the time in the future with the uie timer enabled,
rtc_timer_do_work will loop for a while because the expiration of the uie
timer was way before the current RTC time and a new timer will be enqueued
until the current rtc time is reached.
If the uie timer is enabled, disable it before setting the time and enable
it after expiring current timers (which may actually be an alarm).
This is the safest thing to do to ensure the uie timer is still
synchronized with the RTC, especially in the UIE emulation case.
Reported-by: syzbot+08116743f8ad6f9a6de7@syzkaller.appspotmail.com
Fixes:
6610e0893b8b ("RTC: Rework RTC code to use timerqueue for events")
Link: https://lore.kernel.org/r/20191020231320.8191-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrey Konovalov [Mon, 21 Oct 2019 14:20:58 +0000 (16:20 +0200)]
USB: dummy-hcd: increase max number of devices to 32
commit
8442b02bf3c6770e0d7e7ea17be36c30e95987b6 upstream.
When fuzzing the USB subsystem with syzkaller, we currently use 8 testing
processes within one VM. To isolate testing processes from one another it
is desirable to assign a dedicated USB bus to each of those, which means
we need at least 8 Dummy UDC/HCD devices.
This patch increases the maximum number of Dummy UDC/HCD devices to 32
(more than 8 in case we need more of them in the future).
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Link: https://lore.kernel.org/r/665578f904484069bb6100fb20283b22a046ad9b.1571667489.git.andreyknvl@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Ellerman [Wed, 27 Nov 2019 07:41:26 +0000 (18:41 +1100)]
powerpc: Define arch_is_kernel_initmem_freed() for lockdep
commit
6f07048c00fd100ed8cab66c225c157e0b6c0a50 upstream.
Under certain circumstances, we hit a warning in lockdep_register_key:
if (WARN_ON_ONCE(static_obj(key)))
return;
This occurs when the key falls into initmem that has since been freed
and can now be reused. This has been observed on boot, and under
memory pressure.
Define arch_is_kernel_initmem_freed(), which allows lockdep to
correctly identify this memory as dynamic.
This fixes a bug picked up by the powerpc64 syzkaller instance where
we hit the WARN via alloc_netdev_mqs.
Reported-by: Qian Cai <cai@lca.pw>
Reported-by: ppc syzbot c/o Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Link: https://lore.kernel.org/r/87lfs4f7d6.fsf@dja-thinkpad.axtens.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chen Jun [Sun, 1 Dec 2019 01:58:11 +0000 (17:58 -0800)]
mm/shmem.c: cast the type of unmap_start to u64
commit
aa71ecd8d86500da6081a72da6b0b524007e0627 upstream.
In 64bit system. sb->s_maxbytes of shmem filesystem is MAX_LFS_FILESIZE,
which equal LLONG_MAX.
If offset > LLONG_MAX - PAGE_SIZE, offset + len < LLONG_MAX in
shmem_fallocate, which will pass the checking in vfs_fallocate.
/* Check for wrap through zero too */
if (((offset + len) > inode->i_sb->s_maxbytes) || ((offset + len) < 0))
return -EFBIG;
loff_t unmap_start = round_up(offset, PAGE_SIZE) in shmem_fallocate
causes a overflow.
Syzkaller reports a overflow problem in mm/shmem:
UBSAN: Undefined behaviour in mm/shmem.c:2014:10
signed integer overflow: '
9223372036854775807 + 1' cannot be represented in type 'long long int'
CPU: 0 PID:17076 Comm: syz-executor0 Not tainted 4.1.46+ #1
Hardware name: linux, dummy-virt (DT)
Call trace:
dump_backtrace+0x0/0x2c8 arch/arm64/kernel/traps.c:100
show_stack+0x20/0x30 arch/arm64/kernel/traps.c:238
__dump_stack lib/dump_stack.c:15 [inline]
ubsan_epilogue+0x18/0x70 lib/ubsan.c:164
handle_overflow+0x158/0x1b0 lib/ubsan.c:195
shmem_fallocate+0x6d0/0x820 mm/shmem.c:2104
vfs_fallocate+0x238/0x428 fs/open.c:312
SYSC_fallocate fs/open.c:335 [inline]
SyS_fallocate+0x54/0xc8 fs/open.c:239
The highest bit of unmap_start will be appended with sign bit 1
(overflow) when calculate shmem_falloc.start:
shmem_falloc.start = unmap_start >> PAGE_SHIFT.
Fix it by casting the type of unmap_start to u64, when right shifted.
This bug is found in LTS Linux 4.1. It also seems to exist in mainline.
Link: http://lkml.kernel.org/r/1573867464-5107-1-git-send-email-chenjun102@huawei.com
Signed-off-by: Chen Jun <chenjun102@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gerald Schaefer [Tue, 19 Nov 2019 11:30:53 +0000 (12:30 +0100)]
s390/kaslr: store KASLR offset for early dumps
commit
a9f2f6865d784477e1c7b59269d3a384abafd9ca upstream.
The KASLR offset is added to vmcoreinfo in arch_crash_save_vmcoreinfo(),
so that it can be found by crash when processing kernel dumps.
However, arch_crash_save_vmcoreinfo() is called during a subsys_initcall,
so if the kernel crashes before that, we have no vmcoreinfo and no KASLR
offset.
Fix this by storing the KASLR offset in the lowcore, where the vmcore_info
pointer will be stored, and where it can be found by crash. In order to
make it distinguishable from a real vmcore_info pointer, mark it as uneven
(KASLR offset itself is aligned to THREAD_SIZE).
When arch_crash_save_vmcoreinfo() stores the real vmcore_info pointer in
the lowcore, it overwrites the KASLR offset. At that point, the KASLR
offset is not yet added to vmcoreinfo, so we also need to move the
mem_assign_absolute() behind the vmcoreinfo_append_str().
Fixes:
b2d24b97b2a9 ("s390/kernel: add support for kernel address space layout randomization (KASLR)")
Cc: <stable@vger.kernel.org> # v5.2+
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Heiko Carstens [Mon, 18 Nov 2019 12:09:52 +0000 (13:09 +0100)]
s390/smp,vdso: fix ASCE handling
commit
a2308c11ecbc3471ebb7435ee8075815b1502ef0 upstream.
When a secondary CPU is brought up it must initialize its control
registers. CPU A which triggers that a secondary CPU B is brought up
stores its control register contents into the lowcore of new CPU B,
which then loads these values on startup.
This is problematic in various ways: the control register which
contains the home space ASCE will correctly contain the kernel ASCE;
however control registers for primary and secondary ASCEs are
initialized with whatever values were present in CPU A.
Typically:
- the primary ASCE will contain the user process ASCE of the process
that triggered onlining of CPU B.
- the secondary ASCE will contain the percpu VDSO ASCE of CPU A.
Due to lazy ASCE handling we may also end up with other combinations.
When then CPU B switches to a different process (!= idle) it will
fixup the primary ASCE. However the problem is that the (wrong) ASCE
from CPU A was loaded into control register 1: as soon as an ASCE is
attached (aka loaded) a CPU is free to generate TLB entries using that
address space.
Even though it is very unlikey that CPU B will actually generate such
entries, this could result in TLB entries of the address space of the
process that ran on CPU A. These entries shouldn't exist at all and
could cause problems later on.
Furthermore the secondary ASCE of CPU B will not be updated correctly.
This means that processes may see wrong results or even crash if they
access VDSO data on CPU B. The correct VDSO ASCE will eventually be
loaded on return to user space as soon as the kernel executed a call
to strnlen_user or an atomic futex operation on CPU B.
Fix both issues by intializing the to be loaded control register
contents with the correct ASCEs and also enforce (re-)loading of the
ASCEs upon first context switch and return to user space.
Fixes:
0aaba41b58bc ("s390: remove all code using the access register mode")
Cc: stable@vger.kernel.org # v4.15+
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Mon, 4 Nov 2019 15:58:15 +0000 (15:58 +0000)]
firmware: qcom: scm: Ensure 'a0' status code is treated as signed
commit
ff34f3cce278a0982a7b66b1afaed6295141b1fc upstream.
The 'a0' member of 'struct arm_smccc_res' is declared as 'unsigned long',
however the Qualcomm SCM firmware interface driver expects to receive
negative error codes via this field, so ensure that it's cast to 'long'
before comparing to see if it is less than 0.
Cc: <stable@vger.kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Theodore Ts'o [Tue, 12 Nov 2019 03:18:13 +0000 (22:18 -0500)]
ext4: work around deleting a file with i_nlink == 0 safely
commit
c7df4a1ecb8579838ec8c56b2bb6a6716e974f37 upstream.
If the file system is corrupted such that a file's i_links_count is
too small, then it's possible that when unlinking that file, i_nlink
will already be zero. Previously we were working around this kind of
corruption by forcing i_nlink to one; but we were doing this before
trying to delete the directory entry --- and if the file system is
corrupted enough that ext4_delete_entry() fails, then we exit with
i_nlink elevated, and this causes the orphan inode list handling to be
FUBAR'ed, such that when we unmount the file system, the orphan inode
list can get corrupted.
A better way to fix this is to simply skip trying to call drop_nlink()
if i_nlink is already zero, thus moving the check to the place where
it makes the most sense.
https://bugzilla.kernel.org/show_bug.cgi?id=205433
Link: https://lore.kernel.org/r/20191112032903.8828-1-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Roman Gushchin [Thu, 5 Dec 2019 00:49:46 +0000 (16:49 -0800)]
mm: memcg/slab: wait for !root kmem_cache refcnt killing on root kmem_cache destruction
commit
a264df74df38855096393447f1b8f386069a94b9 upstream.
Christian reported a warning like the following obtained during running
some KVM-related tests on s390:
WARNING: CPU: 8 PID: 208 at lib/percpu-refcount.c:108 percpu_ref_exit+0x50/0x58
Modules linked in: kvm(-) xt_CHECKSUM xt_MASQUERADE bonding xt_tcpudp ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_conntrack ip6table_na>
CPU: 8 PID: 208 Comm: kworker/8:1 Not tainted 5.2.0+ #66
Hardware name: IBM 2964 NC9 712 (LPAR)
Workqueue: events sysfs_slab_remove_workfn
Krnl PSW :
0704e00180000000 0000001529746850 (percpu_ref_exit+0x50/0x58)
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3
Krnl GPRS:
00000000ffff8808 0000001529746740 000003f4e30e8e18 0036008100000000
0000001f00000000 0035008100000000 0000001fb3573ab8 0000000000000000
0000001fbdb6de00 0000000000000000 0000001529f01328 0000001fb3573b00
0000001fbb27e000 0000001fbdb69300 000003e009263d00 000003e009263cd0
Krnl Code:
0000001529746842:
f0a0000407fe srp 4(11,%r0),2046,0
0000001529746848:
47000700 bc 0,1792
#
000000152974684c:
a7f40001 brc 15,
152974684e
>
0000001529746850:
a7f4fff2 brc 15,
1529746834
0000001529746854: 0707 bcr 0,%r7
0000001529746856: 0707 bcr 0,%r7
0000001529746858:
eb8ff0580024 stmg %r8,%r15,88(%r15)
000000152974685e:
a738ffff lhi %r3,-1
Call Trace:
([<
000003e009263d00>] 0x3e009263d00)
[<
00000015293252ea>] slab_kmem_cache_release+0x3a/0x70
[<
0000001529b04882>] kobject_put+0xaa/0xe8
[<
000000152918cf28>] process_one_work+0x1e8/0x428
[<
000000152918d1b0>] worker_thread+0x48/0x460
[<
00000015291942c6>] kthread+0x126/0x160
[<
0000001529b22344>] ret_from_fork+0x28/0x30
[<
0000001529b2234c>] kernel_thread_starter+0x0/0x10
Last Breaking-Event-Address:
[<
000000152974684c>] percpu_ref_exit+0x4c/0x58
---[ end trace
b035e7da5788eb09 ]---
The problem occurs because kmem_cache_destroy() is called immediately
after deleting of a memcg, so it races with the memcg kmem_cache
deactivation.
flush_memcg_workqueue() at the beginning of kmem_cache_destroy() is
supposed to guarantee that all deactivation processes are finished, but
failed to do so. It waits for an rcu grace period, after which all
children kmem_caches should be deactivated. During the deactivation
percpu_ref_kill() is called for non root kmem_cache refcounters, but it
requires yet another rcu grace period to finish the transition to the
atomic (dead) state.
So in a rare case when not all children kmem_caches are destroyed at the
moment when the root kmem_cache is about to be gone, we need to wait
another rcu grace period before destroying the root kmem_cache.
This issue can be triggered only with dynamically created kmem_caches
which are used with memcg accounting. In this case per-memcg child
kmem_caches are created. They are deactivated from the cgroup removing
path. If the destruction of the root kmem_cache is racing with the
removal of the cgroup (both are quite complicated multi-stage
processes), the described issue can occur. The only known way to
trigger it in the real life, is to unload some kernel module which
creates a dedicated kmem_cache, used from different memory cgroups with
GFP_ACCOUNT flag. If the unloading happens immediately after calling
rmdir on the corresponding cgroup, there is some chance to trigger the
issue.
Link: http://lkml.kernel.org/r/20191129025011.3076017-1-guro@fb.com
Fixes:
f0a3a24b532d ("mm: memcg/slab: rework non-root kmem_cache lifecycle management")
Signed-off-by: Roman Gushchin <guro@fb.com>
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Schultz [Tue, 17 Sep 2019 08:12:53 +0000 (10:12 +0200)]
mfd: rk808: Fix RK818 ID template
commit
37ef8c2c15bdc1322b160e38986c187de2b877b2 upstream.
The Rockchip PMIC driver can automatically detect connected component
versions by reading the ID_MSB and ID_LSB registers. The probe function
will always fail with RK818 PMICs because the ID_MSK is 0xFFF0 and the
RK818 template ID is 0x8181.
This patch changes this value to 0x8180.
Fixes:
9d6105e19f61 ("mfd: rk808: Fix up the chip id get failed")
Cc: stable@vger.kernel.org
Cc: Elaine Zhang <zhangqing@rock-chips.com>
Cc: Joseph Chen <chenjh@rock-chips.com>
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicolas Geoffray [Sun, 1 Dec 2019 01:53:28 +0000 (17:53 -0800)]
mm, memfd: fix COW issue on MAP_PRIVATE and F_SEAL_FUTURE_WRITE mappings
commit
05d351102dbe4e103d6bdac18b1122cd3cd04925 upstream.
F_SEAL_FUTURE_WRITE has unexpected behavior when used with MAP_PRIVATE:
A private mapping created after the memfd file that gets sealed with
F_SEAL_FUTURE_WRITE loses the copy-on-write at fork behavior, meaning
children and parent share the same memory, even though the mapping is
private.
The reason for this is due to the code below:
static int shmem_mmap(struct file *file, struct vm_area_struct *vma)
{
struct shmem_inode_info *info = SHMEM_I(file_inode(file));
if (info->seals & F_SEAL_FUTURE_WRITE) {
/*
* New PROT_WRITE and MAP_SHARED mmaps are not allowed when
* "future write" seal active.
*/
if ((vma->vm_flags & VM_SHARED) && (vma->vm_flags & VM_WRITE))
return -EPERM;
/*
* Since the F_SEAL_FUTURE_WRITE seals allow for a MAP_SHARED
* read-only mapping, take care to not allow mprotect to revert
* protections.
*/
vma->vm_flags &= ~(VM_MAYWRITE);
}
...
}
And for the mm to know if a mapping is copy-on-write:
static inline bool is_cow_mapping(vm_flags_t flags)
{
return (flags & (VM_SHARED | VM_MAYWRITE)) == VM_MAYWRITE;
}
The patch fixes the issue by making the mprotect revert protection
happen only for shared mappings. For private mappings, using mprotect
will have no effect on the seal behavior.
The F_SEAL_FUTURE_WRITE feature was introduced in v5.1 so v5.3.x stable
kernels would need a backport.
[akpm@linux-foundation.org: reflow comment, per Christoph]
Link: http://lkml.kernel.org/r/20191107195355.80608-1-joel@joelfernandes.org
Fixes:
ab3948f58ff84 ("mm/memfd: add an F_SEAL_FUTURE_WRITE seal to memfd")
Signed-off-by: Nicolas Geoffray <ngeoffray@google.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vincenzo Frascino [Mon, 2 Dec 2019 07:57:29 +0000 (07:57 +0000)]
powerpc: Fix vDSO clock_getres()
[ Upstream commit
552263456215ada7ee8700ce022d12b0cffe4802 ]
clock_getres in the vDSO library has to preserve the same behaviour
of posix_get_hrtimer_res().
In particular, posix_get_hrtimer_res() does:
sec = 0;
ns = hrtimer_resolution;
and hrtimer_resolution depends on the enablement of the high
resolution timers that can happen either at compile or at run time.
Fix the powerpc vdso implementation of clock_getres keeping a copy of
hrtimer_resolution in vdso data and using that directly.
Fixes:
a7f290dad32e ("[PATCH] powerpc: Merge vdso's and add vdso support to 32 bits kernel")
Cc: stable@vger.kernel.org
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
[chleroy: changed CLOCK_REALTIME_RES to CLOCK_HRTIMER_RES]
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a55eca3a5e85233838c2349783bcb5164dae1d09.1575273217.git.christophe.leroy@c-s.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nathan Chancellor [Tue, 19 Nov 2019 04:57:11 +0000 (21:57 -0700)]
powerpc: Avoid clang warnings around setjmp and longjmp
[ Upstream commit
c9029ef9c95765e7b63c4d9aa780674447db1ec0 ]
Commit
aea447141c7e ("powerpc: Disable -Wbuiltin-requires-header when
setjmp is used") disabled -Wbuiltin-requires-header because of a
warning about the setjmp and longjmp declarations.
r367387 in clang added another diagnostic around this, complaining
that there is no jmp_buf declaration.
In file included from ../arch/powerpc/xmon/xmon.c:47:
../arch/powerpc/include/asm/setjmp.h:10:13: error: declaration of
built-in function 'setjmp' requires the declaration of the 'jmp_buf'
type, commonly provided in the header <setjmp.h>.
[-Werror,-Wincomplete-setjmp-declaration]
extern long setjmp(long *);
^
../arch/powerpc/include/asm/setjmp.h:11:13: error: declaration of
built-in function 'longjmp' requires the declaration of the 'jmp_buf'
type, commonly provided in the header <setjmp.h>.
[-Werror,-Wincomplete-setjmp-declaration]
extern void longjmp(long *, long);
^
2 errors generated.
We are not using the standard library's longjmp/setjmp implementations
for obvious reasons; make this clear to clang by using -ffreestanding
on these files.
Cc: stable@vger.kernel.org # 4.14+
Suggested-by: Segher Boessenkool <segher@kernel.crashing.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191119045712.39633-3-natechancellor@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
H. Nikolaus Schaller [Thu, 7 Nov 2019 10:30:39 +0000 (11:30 +0100)]
omap: pdata-quirks: remove openpandora quirks for mmc3 and wl1251
[ Upstream commit
2398c41d64321e62af54424fd399964f3d48cdc2 ]
With a wl1251 child node of mmc3 in the device tree decoded
in omap_hsmmc.c to handle special wl1251 initialization, we do
no longer need to instantiate the mmc3 through pdata quirks.
We also can remove the wlan regulator and reset/interrupt definitions
and do them through device tree.
Fixes:
81eef6ca9201 ("mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Cc: <stable@vger.kernel.org> # v4.7+
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
H. Nikolaus Schaller [Thu, 7 Nov 2019 10:30:38 +0000 (11:30 +0100)]
omap: pdata-quirks: revert pandora specific gpiod additions
[ Upstream commit
4e8fad98171babe019db51c15055ec74697e9525 ]
This partly reverts the commit
efdfeb079cc3 ("regulator: fixed: Convert to
use GPIO descriptor only").
We must remove this from mainline first, so that the following patch
to remove the openpandora quirks for mmc3 and wl1251 cleanly applies
to stable v4.9, v4.14, v4.19 where the above mentioned patch is not yet
present.
Since the code affected is removed (no pandora gpios in pdata-quirks
and more), there will be no matching revert-of-the-revert.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrea Merello [Mon, 2 Dec 2019 14:13:36 +0000 (15:13 +0100)]
iio: ad7949: fix channels mixups
[ Upstream commit
3b71f6b59508b1c9befcb43de434866aafc76520 ]
Each time we need to read a sample (from the sysfs interface, since the
driver supports only it) the driver writes the configuration register
with the proper settings needed to perform the said read, then it runs
another xfer to actually read the resulting value. Most notably the
configuration register is updated to set the ADC internal MUX depending by
which channel the read targets.
Unfortunately this seems not enough to ensure correct operation because
the ADC works in a pipelined-like fashion and the new configuration isn't
applied in time.
The ADC alternates two phases: acquisition and conversion. During the
acquisition phase the ADC samples the analog signal in an internal
capacitor; in the conversion phase the ADC performs the actual analog to
digital conversion of the stored voltage. Note that of course the MUX
needs to be set to the proper channel when the acquisition phase is
performed.
Once the conversion phase has been completed, the device automatically
switches back to a new acquisition; on the other hand the device switches
from acquisition to conversion on the rising edge of SPI cs signal (that
is when the xfer finishes).
Only after both two phases have been completed (with the proper settings
already written in the configuration register since the beginning) it is
possible to read the outcome from SPI bus.
With the current driver implementation, we end up in the following
situation:
_______ 1st xfer ____________ 2nd xfer ___________________
SPI cs.. \_________/ \_________/
SPI rd.. idle |(val N-2)+ idle | val N-1 + idle ...
SPI wr.. idle | cfg N + idle | (X) + idle ...
------------------------ + -------------------- + ------------------
AD .. acq N-1 + cnv N-1 | acq N + cnv N | acq N+1
As shown in the diagram above, the value we read in the Nth read belongs
to configuration setting N-1.
In case the configuration is not changed (config[N] == config[N-1]), then
we still get correct data, but in case the configuration changes (i.e.
switching the MUX on another channel), we get wrong data (data from the
previously selected channel).
This patch fixes this by performing one more "dummy" transfer in order to
ending up in reading the data when it's really ready, as per the following
timing diagram.
_______ 1st xfer ____________ 2nd xfer ___________ 3rd xfer ___
SPI cs.. \_________/ \_________/ \_________/
SPI rd.. idle |(val N-2)+ idle |(val N-1)+ idle | val N + ..
SPI wr.. idle | cfg N + idle | (X) + idle | (X) + ..
------------------------ + -------------------- + ------------------- + --
AD .. acq N-1 + cnv N-1 | acq N + cnv N | acq N+1 | ..
NOTE: in the latter case (cfg changes), the acquisition phase for the
value to be read begins after the 1st xfer, that is after the read request
has been issued on sysfs. On the other hand, if the cfg doesn't change,
then we can refer to the fist diagram assuming N == (N - 1); the
acquisition phase _begins_ before the 1st xfer (potentially a lot of time
before the read has been issued via sysfs, but it _ends_ after the 1st
xfer, that is _after_ the read has started. This should guarantee a
reasonably fresh data, which value represents the voltage that the sampled
signal has after the read start or maybe just around it.
Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Reviewed-by: Charles-Antoine Couret <charles-antoine.couret@essensium.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrea Merello [Thu, 12 Sep 2019 14:43:07 +0000 (16:43 +0200)]
iio: ad7949: kill pointless "readback"-handling code
[ Upstream commit
c270bbf7bb9ddc4e2a51b3c56557c377c9ac79bc ]
The device could be configured to spit out also the configuration word
while reading the AD result value (in the same SPI xfer) - this is called
"readback" in the device datasheet.
The driver checks if readback is enabled and it eventually adjusts the SPI
xfer length and it applies proper shifts to still get the data, discarding
the configuration word.
The readback option is actually never enabled (the driver disables it), so
the said checks do not serve for any purpose.
Since enabling the readback option seems not to provide any advantage (the
driver entirely sets the configuration word without relying on any default
value), just kill the said, unused, code.
Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Martin K. Petersen [Tue, 19 Nov 2019 04:55:45 +0000 (23:55 -0500)]
Revert "scsi: qla2xxx: Fix memory leak when sending I/O fails"
[ Upstream commit
5a993e507ee65a28eca6690ee11868555c4ca46b ]
This reverts commit
2f856d4e8c23f5ad5221f8da4a2f22d090627f19.
This patch was found to introduce a double free regression. The issue
it originally attempted to address was fixed in patch
f45bca8c5052 ("scsi: qla2xxx: Fix double scsi_done for abort path").
Link: https://lore.kernel.org/r/4BDE2B95-835F-43BE-A32C-2629D7E03E0A@marvell.com
Requested-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bart Van Assche [Wed, 6 Nov 2019 04:42:26 +0000 (20:42 -0800)]
scsi: qla2xxx: Fix a dma_pool_free() call
[ Upstream commit
162b805e38327135168cb0938bd37b131b481cb0 ]
This patch fixes the following kernel warning:
DMA-API: qla2xxx 0000:00:0a.0: device driver frees DMA memory with different size [device address=0x00000000c7b60000] [map size=4088 bytes] [unmap size=512 bytes]
WARNING: CPU: 3 PID: 1122 at kernel/dma/debug.c:1021 check_unmap+0x4d0/0xbd0
CPU: 3 PID: 1122 Comm: rmmod Tainted: G O 5.4.0-rc1-dbg+ #1
RIP: 0010:check_unmap+0x4d0/0xbd0
Call Trace:
debug_dma_free_coherent+0x123/0x173
dma_free_attrs+0x76/0xe0
qla2x00_mem_free+0x329/0xc40 [qla2xxx_scst]
qla2x00_free_device+0x170/0x1c0 [qla2xxx_scst]
qla2x00_remove_one+0x4f0/0x6d0 [qla2xxx_scst]
pci_device_remove+0xd5/0x1f0
device_release_driver_internal+0x159/0x280
driver_detach+0x8b/0xf2
bus_remove_driver+0x9a/0x15a
driver_unregister+0x51/0x70
pci_unregister_driver+0x2d/0x130
qla2x00_module_exit+0x1c/0xbc [qla2xxx_scst]
__x64_sys_delete_module+0x22a/0x300
do_syscall_64+0x6f/0x2e0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes:
3f006ac342c0 ("scsi: qla2xxx: Secure flash update support for ISP28XX") # v5.2-rc1~130^2~270.
Cc: Michael Hernandez <mhernandez@marvell.com>
Cc: Himanshu Madhani <hmadhani@marvell.com>
Link: https://lore.kernel.org/r/20191106044226.5207-3-bvanassche@acm.org
Reviewed-by: Martin Wilck <mwilck@suse.com>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Quinn Tran [Tue, 5 Nov 2019 15:06:52 +0000 (07:06 -0800)]
scsi: qla2xxx: Fix SRB leak on switch command timeout
[ Upstream commit
af2a0c51b1205327f55a7e82e530403ae1d42cbb ]
when GPSC/GPDB switch command fails, driver just returns without doing a
proper cleanup. This patch fixes this memory leak by calling sp->free() in
the error path.
Link: https://lore.kernel.org/r/20191105150657.8092-4-hmadhani@marvell.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jeff Mahoney [Thu, 24 Oct 2019 14:31:27 +0000 (10:31 -0400)]
reiserfs: fix extended attributes on the root directory
commit
60e4cf67a582d64f07713eda5fcc8ccdaf7833e6 upstream.
Since commit
d0a5b995a308 (vfs: Add IOP_XATTR inode operations flag)
extended attributes haven't worked on the root directory in reiserfs.
This is due to reiserfs conditionally setting the sb->s_xattrs handler
array depending on whether it located or create the internal privroot
directory. It necessarily does this after the root inode is already
read in. The IOP_XATTR flag is set during inode initialization, so
it never gets set on the root directory.
This commit unconditionally assigns sb->s_xattrs and clears IOP_XATTR on
internal inodes. The old return values due to the conditional assignment
are handled via open_xa_root, which now returns EOPNOTSUPP as the VFS
would have done.
Link: https://lore.kernel.org/r/20191024143127.17509-1-jeffm@suse.com
CC: stable@vger.kernel.org
Fixes:
d0a5b995a308 ("vfs: Add IOP_XATTR inode operations flag")
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kara [Tue, 5 Nov 2019 16:44:12 +0000 (17:44 +0100)]
ext4: Fix credit estimate for final inode freeing
commit
65db869c754e7c271691dd5feabf884347e694f5 upstream.
Estimate for the number of credits needed for final freeing of inode in
ext4_evict_inode() was to small. We may modify 4 blocks (inode & sb for
orphan deletion, bitmap & group descriptor for inode freeing) and not
just 3.
[ Fixed minor whitespace nit. -- TYT ]
Fixes:
e50e5129f384 ("ext4: xattr-in-inode support")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191105164437.32602-6-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Monakhov [Thu, 31 Oct 2019 10:39:19 +0000 (10:39 +0000)]
quota: fix livelock in dquot_writeback_dquots
commit
6ff33d99fc5c96797103b48b7b0902c296f09c05 upstream.
Write only quotas which are dirty at entry.
XFSTEST: https://github.com/dmonakhov/xfstests/commit/
b10ad23566a5bf75832a6f500e1236084083cddc
Link: https://lore.kernel.org/r/20191031103920.3919-1-dmonakhov@openvz.org
CC: stable@vger.kernel.org
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christian Brauner [Fri, 20 Sep 2019 08:30:06 +0000 (10:30 +0200)]
seccomp: avoid overflow in implicit constant conversion
commit
223e660bc7638d126a0e4fbace4f33f2895788c4 upstream.
USER_NOTIF_MAGIC is assigned to int variables in this test so set it to INT_MAX
to avoid warnings:
seccomp_bpf.c: In function ‘user_notification_continue’:
seccomp_bpf.c:3088:26: warning: overflow in implicit constant conversion [-Woverflow]
#define USER_NOTIF_MAGIC 116983961184613L
^
seccomp_bpf.c:3572:15: note: in expansion of macro ‘USER_NOTIF_MAGIC’
resp.error = USER_NOTIF_MAGIC;
^~~~~~~~~~~~~~~~
Fixes:
6a21cc50f0c7 ("seccomp: add a return code to trap to userspace")
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: Tyler Hicks <tyhicks@canonical.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Tycho Andersen <tycho@tycho.ws>
Cc: stable@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: bpf@vger.kernel.org
Reviewed-by: Tycho Andersen <tycho@tycho.ws>
Link: https://lore.kernel.org/r/20190920083007.11475-3-christian.brauner@ubuntu.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chengguang Xu [Tue, 5 Nov 2019 04:51:00 +0000 (12:51 +0800)]
ext2: check err when partial != NULL
commit
e705f4b8aa27a59f8933e8f384e9752f052c469c upstream.
Check err when partial == NULL is meaningless because
partial == NULL means getting branch successfully without
error.
CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191105045100.7104-1-cgxu519@mykernel.net
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Monakhov [Thu, 31 Oct 2019 10:39:20 +0000 (10:39 +0000)]
quota: Check that quota is not dirty before release
commit
df4bb5d128e2c44848aeb36b7ceceba3ac85080d upstream.
There is a race window where quota was redirted once we drop dq_list_lock inside dqput(),
but before we grab dquot->dq_lock inside dquot_release()
TASK1 TASK2 (chowner)
->dqput()
we_slept:
spin_lock(&dq_list_lock)
if (dquot_dirty(dquot)) {
spin_unlock(&dq_list_lock);
dquot->dq_sb->dq_op->write_dquot(dquot);
goto we_slept
if (test_bit(DQ_ACTIVE_B, &dquot->dq_flags)) {
spin_unlock(&dq_list_lock);
dquot->dq_sb->dq_op->release_dquot(dquot);
dqget()
mark_dquot_dirty()
dqput()
goto we_slept;
}
So dquot dirty quota will be released by TASK1, but on next we_sleept loop
we detect this and call ->write_dquot() for it.
XFSTEST: https://github.com/dmonakhov/xfstests/commit/
440a80d4cbb39e9234df4d7240aee1d551c36107
Link: https://lore.kernel.org/r/20191031103920.3919-2-dmonakhov@openvz.org
CC: stable@vger.kernel.org
Signed-off-by: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ville Syrjälä [Thu, 19 Sep 2019 13:28:53 +0000 (16:28 +0300)]
video/hdmi: Fix AVI bar unpack
commit
6039f37dd6b76641198e290f26b31c475248f567 upstream.
The bar values are little endian, not big endian. The pack
function did it right but the unpack got it wrong. Fix it.
Cc: stable@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: Martin Bugge <marbugge@cisco.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Fixes:
2c676f378edb ("[media] hdmi: added unpack and logging functions for InfoFrames")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919132853.30954-1-ville.syrjala@linux.intel.com
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cédric Le Goater [Tue, 3 Dec 2019 16:36:42 +0000 (17:36 +0100)]
powerpc/xive: Skip ioremap() of ESB pages for LSI interrupts
commit
b67a95f2abff0c34e5667c15ab8900de73d8d087 upstream.
The PCI INTx interrupts and other LSI interrupts are handled differently
under a sPAPR platform. When the interrupt source characteristics are
queried, the hypervisor returns an H_INT_ESB flag to inform the OS
that it should be using the H_INT_ESB hcall for interrupt management
and not loads and stores on the interrupt ESB pages.
A default -1 value is returned for the addresses of the ESB pages. The
driver ignores this condition today and performs a bogus IO mapping.
Recent changes and the DEBUG_VM configuration option make the bug
visible with :
kernel BUG at arch/powerpc/include/asm/book3s/64/pgtable.h:612!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Radix MMU=Hash SMP NR_CPUS=1024 NUMA pSeries
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.4.0-0.rc6.git0.1.fc32.ppc64le #1
NIP:
c000000000f63294 LR:
c000000000f62e44 CTR:
0000000000000000
REGS:
c0000000fa45f0d0 TRAP: 0700 Not tainted (5.4.0-0.rc6.git0.1.fc32.ppc64le)
...
NIP ioremap_page_range+0x4c4/0x6e0
LR ioremap_page_range+0x74/0x6e0
Call Trace:
ioremap_page_range+0x74/0x6e0 (unreliable)
do_ioremap+0x8c/0x120
__ioremap_caller+0x128/0x140
ioremap+0x30/0x50
xive_spapr_populate_irq_data+0x170/0x260
xive_irq_domain_map+0x8c/0x170
irq_domain_associate+0xb4/0x2d0
irq_create_mapping+0x1e0/0x3b0
irq_create_fwspec_mapping+0x27c/0x3e0
irq_create_of_mapping+0x98/0xb0
of_irq_parse_and_map_pci+0x168/0x230
pcibios_setup_device+0x88/0x250
pcibios_setup_bus_devices+0x54/0x100
__of_scan_bus+0x160/0x310
pcibios_scan_phb+0x330/0x390
pcibios_init+0x8c/0x128
do_one_initcall+0x60/0x2c0
kernel_init_freeable+0x290/0x378
kernel_init+0x2c/0x148
ret_from_kernel_thread+0x5c/0x80
Fixes:
bed81ee181dd ("powerpc/xive: introduce H_INT_ESB hcall")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191203163642.2428-1-clg@kaod.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alastair D'Silva [Mon, 4 Nov 2019 02:32:53 +0000 (13:32 +1100)]
powerpc: Allow flush_icache_range to work across ranges >4GB
commit
29430fae82073d39b1b881a3cd507416a56a363f upstream.
When calling flush_icache_range with a size >4GB, we were masking
off the upper 32 bits, so we would incorrectly flush a range smaller
than intended.
This patch replaces the 32 bit shifts with 64 bit ones, so that
the full size is accounted for.
Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
Cc: stable@vger.kernel.org
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191104023305.9581-2-alastair@au1.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cédric Le Goater [Thu, 31 Oct 2019 06:31:00 +0000 (07:31 +0100)]
powerpc/xive: Prevent page fault issues in the machine crash handler
commit
1ca3dec2b2dff9d286ce6cd64108bda0e98f9710 upstream.
When the machine crash handler is invoked, all interrupts are masked
but interrupts which have not been started yet do not have an ESB page
mapped in the Linux address space. This crashes the 'crash kexec'
sequence on sPAPR guests.
To fix, force the mapping of the ESB page when an interrupt is being
mapped in the Linux IRQ number space. This is done by setting the
initial state of the interrupt to OFF which is not necessarily the
case on PowerNV.
Fixes:
243e25112d06 ("powerpc/xive: Native exploitation of the XIVE interrupt controller")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191031063100.3864-1-clg@kaod.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alastair D'Silva [Mon, 4 Nov 2019 02:32:54 +0000 (13:32 +1100)]
powerpc: Allow 64bit VDSO __kernel_sync_dicache to work across ranges >4GB
commit
f9ec11165301982585e5e5f606739b5bae5331f3 upstream.
When calling __kernel_sync_dicache with a size >4GB, we were masking
off the upper 32 bits, so we would incorrectly flush a range smaller
than intended.
This patch replaces the 32 bit shifts with 64 bit ones, so that
the full size is accounted for.
Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
Cc: stable@vger.kernel.org
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191104023305.9581-3-alastair@au1.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yabin Cui [Mon, 4 Nov 2019 18:12:50 +0000 (11:12 -0700)]
coresight: Serialize enabling/disabling a link device.
commit
edda32dabedb01f98b9d7b9a4492c13357834bbe upstream.
When tracing etm data of multiple threads on multiple cpus through perf
interface, some link devices are shared between paths of different cpus.
It creates race conditions when different cpus wants to enable/disable
the same link device at the same time.
Example 1:
Two cpus want to enable different ports of a coresight funnel, thus
calling the funnel enable operation at the same time. But the funnel
enable operation isn't reentrantable.
Example 2:
For an enabled coresight dynamic replicator with refcnt=1, one cpu wants
to disable it, while another cpu wants to enable it. Ideally we still have
an enabled replicator with refcnt=1 at the end. But in reality the result
is uncertain.
Since coresight devices claim themselves when enabled for self-hosted
usage, the race conditions above usually make the link devices not usable
after many cycles.
To fix the race conditions, this patch uses spinlocks to serialize
enabling/disabling link devices.
Fixes:
a06ae8609b3d ("coresight: add CoreSight core layer framework")
Signed-off-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: stable <stable@vger.kernel.org> # 5.3
Link: https://lore.kernel.org/r/20191104181251.26732-14-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Shishkin [Thu, 14 Nov 2019 06:42:00 +0000 (08:42 +0200)]
stm class: Lose the protocol driver when dropping its reference
commit
0a8f72fafb3f72a08df4ee491fcbeaafd6de85fd upstream.
Commit
c7fd62bc69d02 ("stm class: Introduce framing protocol drivers")
forgot to tear down the link between an stm device and its protocol
driver when policy is removed. This leads to an invalid pointer reference
if one tries to write to an stm device after the policy has been removed
and the protocol driver module unloaded, leading to the below splat:
> BUG: unable to handle page fault for address:
ffffffffc0737068
> #PF: supervisor read access in kernel mode
> #PF: error_code(0x0000) - not-present page
> PGD
3d780f067 P4D
3d780f067 PUD
3d7811067 PMD
492781067 PTE 0
> Oops: 0000 [#1] SMP NOPTI
> CPU: 1 PID: 26122 Comm: cat Not tainted 5.4.0-rc5+ #1
> RIP: 0010:stm_output_free+0x40/0xc0 [stm_core]
> Call Trace:
> stm_char_release+0x3e/0x70 [stm_core]
> __fput+0xc6/0x260
> ____fput+0xe/0x10
> task_work_run+0x9d/0xc0
> exit_to_usermode_loop+0x103/0x110
> do_syscall_64+0x19d/0x1e0
> entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fix this by tearing down the link from an stm device to its protocol
driver when the policy involving that driver is removed.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Fixes:
c7fd62bc69d02 ("stm class: Introduce framing protocol drivers")
Reported-by: Ammy Yi <ammy.yi@intel.com>
Tested-by: Ammy Yi <ammy.yi@intel.com>
CC: stable@vger.kernel.org # v4.20+
Link: https://lore.kernel.org/r/20191114064201.43089-2-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Fri, 8 Nov 2019 20:34:30 +0000 (21:34 +0100)]
ppdev: fix PPGETTIME/PPSETTIME ioctls
commit
998174042da229e2cf5841f574aba4a743e69650 upstream.
Going through the uses of timeval in the user space API,
I noticed two bugs in ppdev that were introduced in the y2038
conversion:
* The range check was accidentally moved from ppsettime to
ppgettime
* On sparc64, the microseconds are in the other half of the
64-bit word.
Fix both, and mark the fix for stable backports.
Cc: stable@vger.kernel.org
Fixes:
3b9ab374a1e6 ("ppdev: convert to y2038 safe")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20191108203435.112759-8-arnd@arndb.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bart Van Assche [Fri, 25 Oct 2019 22:58:27 +0000 (15:58 -0700)]
RDMA/core: Fix ib_dma_max_seg_size()
commit
ecdfdfdbe4d4c74029f2b416b7ee6d0aeb56364a upstream.
If dev->dma_device->params == NULL then the maximum DMA segment size is 64
KB. See also the dma_get_max_seg_size() implementation. This patch fixes
the following kernel warning:
DMA-API: infiniband rxe0: mapping sg segment longer than device claims to support [len=126976] [max=65536]
WARNING: CPU: 4 PID: 4848 at kernel/dma/debug.c:1220 debug_dma_map_sg+0x3d9/0x450
RIP: 0010:debug_dma_map_sg+0x3d9/0x450
Call Trace:
srp_queuecommand+0x626/0x18d0 [ib_srp]
scsi_queue_rq+0xd02/0x13e0 [scsi_mod]
__blk_mq_try_issue_directly+0x2b3/0x3f0
blk_mq_request_issue_directly+0xac/0xf0
blk_insert_cloned_request+0xdf/0x170
dm_mq_queue_rq+0x43d/0x830 [dm_mod]
__blk_mq_try_issue_directly+0x2b3/0x3f0
blk_mq_request_issue_directly+0xac/0xf0
blk_mq_try_issue_list_directly+0xb8/0x170
blk_mq_sched_insert_requests+0x23c/0x3b0
blk_mq_flush_plug_list+0x529/0x730
blk_flush_plug_list+0x21f/0x260
blk_mq_make_request+0x56b/0xf20
generic_make_request+0x196/0x660
submit_bio+0xae/0x290
blkdev_direct_IO+0x822/0x900
generic_file_direct_write+0x110/0x200
__generic_file_write_iter+0x124/0x2a0
blkdev_write_iter+0x168/0x270
aio_write+0x1c4/0x310
io_submit_one+0x971/0x1390
__x64_sys_io_submit+0x12a/0x390
do_syscall_64+0x6f/0x2e0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Link: https://lore.kernel.org/r/20191025225830.257535-2-bvanassche@acm.org
Cc: <stable@vger.kernel.org>
Fixes:
0b5cb3300ae5 ("RDMA/srp: Increase max_segment_size")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jarkko Nikula [Sat, 16 Nov 2019 15:16:51 +0000 (17:16 +0200)]
ARM: dts: omap3-tao3530: Fix incorrect MMC card detection GPIO polarity
commit
287897f9aaa2ad1c923d9875914f57c4dc9159c8 upstream.
The MMC card detection GPIO polarity is active low on TAO3530, like in many
other similar boards. Now the card is not detected and it is unable to
mount rootfs from an SD card.
Fix this by using the correct polarity.
This incorrect polarity was defined already in the commit
30d95c6d7092
("ARM: dts: omap3: Add Technexion TAO3530 SOM omap3-tao3530.dtsi") in v3.18
kernel and later changed to use defined GPIO constants in v4.4 kernel by
the commit
3a637e008e54 ("ARM: dts: Use defined GPIO constants in flags
cell for OMAP2+ boards").
While the latter commit did not introduce the issue I'm marking it with
Fixes tag due the v4.4 kernels still being maintained.
Fixes:
3a637e008e54 ("ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards")
Cc: linux-stable <stable@vger.kernel.org> # 4.4+
Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H. Nikolaus Schaller [Thu, 7 Nov 2019 10:30:37 +0000 (11:30 +0100)]
mmc: host: omap_hsmmc: add code for special init of wl1251 to get rid of pandora_wl1251_init_card
commit
f6498b922e57aecbe3b7fa30a308d9d586c0c369 upstream.
Pandora_wl1251_init_card was used to do special pdata based
setup of the sdio mmc interface. This does no longer work with
v4.7 and later. A fix requires a device tree based mmc3 setup.
Therefore we move the special setup to omap_hsmmc.c instead
of calling some pdata supplied init_card function.
The new code checks for a DT child node compatible to wl1251
so it will not affect other MMC3 use cases.
Generally, this code was and still is a hack and should be
moved to mmc core to e.g. read such properties from optional
DT child nodes.
Fixes:
81eef6ca9201 ("mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Cc: <stable@vger.kernel.org> # v4.7+
[Ulf: Fixed up some checkpatch complaints]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krzysztof Kozlowski [Mon, 5 Aug 2019 16:27:09 +0000 (18:27 +0200)]
pinctrl: samsung: Fix device node refcount leaks in S3C64xx wakeup controller init
commit
7f028caadf6c37580d0f59c6c094ed09afc04062 upstream.
In s3c64xx_eint_eint0_init() the for_each_child_of_node() loop is used
with a break to find a matching child node. Although each iteration of
for_each_child_of_node puts the previous node, but early exit from loop
misses it. This leads to leak of device node.
Cc: <stable@vger.kernel.org>
Fixes:
61dd72613177 ("pinctrl: Add pinctrl-s3c64xx driver")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krzysztof Kozlowski [Mon, 5 Aug 2019 16:27:10 +0000 (18:27 +0200)]
pinctrl: samsung: Fix device node refcount leaks in init code
commit
a322b3377f4bac32aa25fb1acb9e7afbbbbd0137 upstream.
Several functions use for_each_child_of_node() loop with a break to find
a matching child node. Although each iteration of
for_each_child_of_node puts the previous node, but early exit from loop
misses it. This leads to leak of device node.
Cc: <stable@vger.kernel.org>
Fixes:
9a2c1c3b91aa ("pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krzysztof Kozlowski [Mon, 5 Aug 2019 16:27:08 +0000 (18:27 +0200)]
pinctrl: samsung: Fix device node refcount leaks in S3C24xx wakeup controller init
commit
6fbbcb050802d6ea109f387e961b1dbcc3a80c96 upstream.
In s3c24xx_eint_init() the for_each_child_of_node() loop is used with a
break to find a matching child node. Although each iteration of
for_each_child_of_node puts the previous node, but early exit from loop
misses it. This leads to leak of device node.
Cc: <stable@vger.kernel.org>
Fixes:
af99a7507469 ("pinctrl: Add pinctrl-s3c24xx driver")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krzysztof Kozlowski [Mon, 5 Aug 2019 16:27:07 +0000 (18:27 +0200)]
pinctrl: samsung: Fix device node refcount leaks in Exynos wakeup controller init
commit
5c7f48dd14e892e3e920dd6bbbd52df79e1b3b41 upstream.
In exynos_eint_wkup_init() the for_each_child_of_node() loop is used
with a break to find a matching child node. Although each iteration of
for_each_child_of_node puts the previous node, but early exit from loop
misses it. This leads to leak of device node.
Cc: <stable@vger.kernel.org>
Fixes:
43b169db1841 ("pinctrl: add exynos4210 specific extensions for samsung pinctrl driver")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nishka Dasgupta [Sun, 4 Aug 2019 16:02:00 +0000 (21:32 +0530)]
pinctrl: samsung: Add of_node_put() before return in error path
commit
3d2557ab75d4c568c79eefa2e550e0d80348a6bd upstream.
Each iteration of for_each_child_of_node puts the previous node, but in
the case of a return from the middle of the loop, there is no put, thus
causing a memory leak. Hence add an of_node_put before the return of
exynos_eint_wkup_init() error path.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Cc: <stable@vger.kernel.org>
Fixes:
14c255d35b25 ("pinctrl: exynos: Add irq_chip instance for Exynos7 wakeup interrupts")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gregory CLEMENT [Fri, 15 Nov 2019 15:57:52 +0000 (16:57 +0100)]
pinctrl: armada-37xx: Fix irq mask access in armada_37xx_irq_set_type()
commit
04fb02757ae5188031eb71b2f6f189edb1caf5dc upstream.
As explained in the following commit
a9a1a4833613 ("pinctrl:
armada-37xx: Fix gpio interrupt setup") the armada_37xx_irq_set_type()
function can be called before the initialization of the mask field.
That means that we can't use this field in this function and need to
workaround it using hwirq.
Fixes:
30ac0d3b0702 ("pinctrl: armada-37xx: Add edge both type gpio irq support")
Cc: stable@vger.kernel.org
Reported-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/r/20191115155752.2562-1-gregory.clement@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Brandt [Mon, 30 Sep 2019 14:58:04 +0000 (09:58 -0500)]
pinctrl: rza2: Fix gpio name typos
commit
930d3a4907ae6cdb476db23fc7caa86e9de1e557 upstream.
Fix apparent copy/paste errors that were overlooked in the original driver.
"P0_4" -> "PF_4"
"P0_3" -> "PG_3"
Fixes:
b59d0e782706 ("pinctrl: Add RZ/A2 pin and gpio controller")
Cc: <stable@vger.kernel.org>
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Link: https://lore.kernel.org/r/20190930145804.30497-1-chris.brandt@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rafael J. Wysocki [Wed, 4 Dec 2019 01:54:27 +0000 (02:54 +0100)]
ACPI: PM: Avoid attaching ACPI PM domain to certain devices
commit
b9ea0bae260f6aae546db224daa6ac1bd9d94b91 upstream.
Certain ACPI-enumerated devices represented as platform devices in
Linux, like fans, require special low-level power management handling
implemented by their drivers that is not in agreement with the ACPI
PM domain behavior. That leads to problems with managing ACPI fans
during system-wide suspend and resume.
For this reason, make acpi_dev_pm_attach() skip the affected devices
by adding a list of device IDs to avoid to it and putting the IDs of
the affected devices into that list.
Fixes:
e5cc8ef31267 (ACPI / PM: Provide ACPI PM callback routines for subsystems)
Reported-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Cc: 3.10+ <stable@vger.kernel.org> # 3.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rafael J. Wysocki [Thu, 28 Nov 2019 22:47:51 +0000 (23:47 +0100)]
ACPI: EC: Rework flushing of pending work
commit
016b87ca5c8c6e9e87db442f04dc99609b11ed36 upstream.
There is a race condition in the ACPI EC driver, between
__acpi_ec_flush_event() and acpi_ec_event_handler(), that may
cause systems to stay in suspended-to-idle forever after a wakeup
event coming from the EC.
Namely, acpi_s2idle_wake() calls acpi_ec_flush_work() to wait until
the delayed work resulting from the handling of the EC GPE in
acpi_ec_dispatch_gpe() is processed, and that function invokes
__acpi_ec_flush_event() which uses wait_event() to wait for
ec->nr_pending_queries to become zero on ec->wait, and that wait
queue may be woken up too early.
Suppose that acpi_ec_dispatch_gpe() has caused acpi_ec_gpe_handler()
to run, so advance_transaction() has been called and it has invoked
acpi_ec_submit_query() to queue up an event work item, so
ec->nr_pending_queries has been incremented (under ec->lock). The
work function of that work item, acpi_ec_event_handler() runs later
and calls acpi_ec_query() to process the event. That function calls
acpi_ec_transaction() which invokes acpi_ec_transaction_unlocked()
and the latter wakes up ec->wait under ec->lock, but it drops that
lock before returning.
When acpi_ec_query() returns, acpi_ec_event_handler() acquires
ec->lock and decrements ec->nr_pending_queries, but at that point
__acpi_ec_flush_event() (woken up previously) may already have
acquired ec->lock, checked the value of ec->nr_pending_queries (and
it would not have been zero then) and decided to go back to sleep.
Next, if ec->nr_pending_queries is equal to zero now, the loop
in acpi_ec_event_handler() terminates, ec->lock is released and
acpi_ec_check_event() is called, but it does nothing unless
ec_event_clearing is equal to ACPI_EC_EVT_TIMING_EVENT (which is
not the case by default). In the end, if no more event work items
have been queued up while executing acpi_ec_transaction_unlocked(),
there is nothing to wake up __acpi_ec_flush_event() again and it
sleeps forever, so the suspend-to-idle loop cannot make progress and
the system is permanently suspended.
To avoid this issue, notice that it actually is not necessary to
wait for ec->nr_pending_queries to become zero in every case in
which __acpi_ec_flush_event() is used.
First, during platform-based system suspend (not suspend-to-idle),
__acpi_ec_flush_event() is called by acpi_ec_disable_event() after
clearing the EC_FLAGS_QUERY_ENABLED flag, which prevents
acpi_ec_submit_query() from submitting any new event work items,
so calling flush_scheduled_work() and flushing ec_query_wq
subsequently (in order to wait until all of the queries in that
queue have been processed) would be sufficient to flush all of
the pending EC work in that case.
Second, the purpose of the flushing of pending EC work while
suspended-to-idle described above really is to wait until the
first event work item coming from acpi_ec_dispatch_gpe() is
complete, because it should produce system wakeup events if
that is a valid EC-based system wakeup, so calling
flush_scheduled_work() followed by flushing ec_query_wq is also
sufficient for that purpose.
Rework the code to follow the above observations.
Fixes:
56b9918490 ("PM: sleep: Simplify suspend-to-idle control flow")
Reported-by: Kenneth R. Crudup <kenny@panix.com>
Tested-by: Kenneth R. Crudup <kenny@panix.com>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vamshi K Sthambamkadi [Thu, 28 Nov 2019 10:28:29 +0000 (15:58 +0530)]
ACPI: bus: Fix NULL pointer check in acpi_bus_get_private_data()
commit
627ead724eff33673597216f5020b72118827de4 upstream.
kmemleak reported backtrace:
[<
bbee0454>] kmem_cache_alloc_trace+0x128/0x260
[<
6677f215>] i2c_acpi_install_space_handler+0x4b/0xe0
[<
1180f4fc>] i2c_register_adapter+0x186/0x400
[<
6083baf7>] i2c_add_adapter+0x4e/0x70
[<
a3ddf966>] intel_gmbus_setup+0x1a2/0x2c0 [i915]
[<
84cb69ae>] i915_driver_probe+0x8d8/0x13a0 [i915]
[<
81911d4b>] i915_pci_probe+0x48/0x160 [i915]
[<
4b159af1>] pci_device_probe+0xdc/0x160
[<
b3c64704>] really_probe+0x1ee/0x450
[<
bc029f5a>] driver_probe_device+0x142/0x1b0
[<
d8829d20>] device_driver_attach+0x49/0x50
[<
de71f045>] __driver_attach+0xc9/0x150
[<
df33ac83>] bus_for_each_dev+0x56/0xa0
[<
80089bba>] driver_attach+0x19/0x20
[<
cc73f583>] bus_add_driver+0x177/0x220
[<
7b29d8c7>] driver_register+0x56/0xf0
In i2c_acpi_remove_space_handler(), a leak occurs whenever the
"data" parameter is initialized to 0 before being passed to
acpi_bus_get_private_data().
This is because the NULL pointer check in acpi_bus_get_private_data()
(condition->if(!*data)) returns EINVAL and, in consequence, memory is
never freed in i2c_acpi_remove_space_handler().
Fix the NULL pointer check in acpi_bus_get_private_data() to follow
the analogous check in acpi_get_data_full().
Signed-off-by: Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com>
[ rjw: Subject & changelog ]
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Francesco Ruggeri [Wed, 20 Nov 2019 05:47:27 +0000 (21:47 -0800)]
ACPI: OSL: only free map once in osl.c
commit
833a426cc471b6088011b3d67f1dc4e147614647 upstream.
acpi_os_map_cleanup checks map->refcount outside of acpi_ioremap_lock
before freeing the map. This creates a race condition the can result
in the map being freed more than once.
A panic can be caused by running
for ((i=0; i<10; i++))
do
for ((j=0; j<100000; j++))
do
cat /sys/firmware/acpi/tables/data/BERT >/dev/null
done &
done
This patch makes sure that only the process that drops the reference
to 0 does the freeing.
Fixes:
b7c1fadd6c2e ("ACPI: Do not use krefs under a mutex in osl.c")
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mika Westerberg [Wed, 30 Oct 2019 15:05:45 +0000 (18:05 +0300)]
ACPI / hotplug / PCI: Allocate resources directly under the non-hotplug bridge
commit
77adf9355304f8dcf09054280af5e23fc451ab3d upstream.
Valerio and others reported that commit
84c8b58ed3ad ("ACPI / hotplug /
PCI: Don't scan bridges managed by native hotplug") prevents some recent
LG and HP laptops from booting with endless loop of:
ACPI Error: No handler or method for GPE 08, disabling event (
20190215/evgpe-835)
ACPI Error: No handler or method for GPE 09, disabling event (
20190215/evgpe-835)
ACPI Error: No handler or method for GPE 0A, disabling event (
20190215/evgpe-835)
...
What seems to happen is that during boot, after the initial PCI enumeration
when EC is enabled the platform triggers ACPI Notify() to one of the root
ports. The root port itself looks like this:
pci 0000:00:1b.0: PCI bridge to [bus 02-3a]
pci 0000:00:1b.0: bridge window [mem 0xc4000000-0xda0fffff]
pci 0000:00:1b.0: bridge window [mem 0x80000000-0xa1ffffff 64bit pref]
The BIOS has configured the root port so that it does not have I/O bridge
window.
Now when the ACPI Notify() is triggered ACPI hotplug handler calls
acpiphp_native_scan_bridge() for each non-hotplug bridge (as this system is
using native PCIe hotplug) and pci_assign_unassigned_bridge_resources() to
allocate resources.
The device connected to the root port is a PCIe switch (Thunderbolt
controller) with two hotplug downstream ports. Because of the hotplug ports
__pci_bus_size_bridges() tries to add "additional I/O" of 256 bytes to each
(DEFAULT_HOTPLUG_IO_SIZE). This gets further aligned to 4k as that's the
minimum I/O window size so each hotplug port gets 4k I/O window and the
same happens for the root port (which is also hotplug port). This means
3 * 4k = 12k I/O window.
Because of this pci_assign_unassigned_bridge_resources() ends up opening a
I/O bridge window for the root port at first available I/O address which
seems to be in range 0x1000 - 0x3fff. Normally this range is used for ACPI
stuff such as GPE bits (below is part of /proc/ioports):
1800-1803 : ACPI PM1a_EVT_BLK
1804-1805 : ACPI PM1a_CNT_BLK
1808-180b : ACPI PM_TMR
1810-1815 : ACPI CPU throttle
1850-1850 : ACPI PM2_CNT_BLK
1854-1857 : pnp 00:05
1860-187f : ACPI GPE0_BLK
However, when the ACPI Notify() happened this range was not yet reserved
for ACPI/PNP (that happens later) so PCI gets it. It then starts writing to
this range and accidentally stomps over GPE bits among other things causing
the endless stream of messages about missing GPE handler.
This problem does not happen if "pci=hpiosize=0" is passed in the kernel
command line. The reason is that then the kernel does not try to allocate
the additional 256 bytes for each hotplug port.
Fix this by allocating resources directly below the non-hotplug bridges
where a new device may appear as a result of ACPI Notify(). This avoids the
hotplug bridges and prevents opening the additional I/O window.
Fixes:
84c8b58ed3ad ("ACPI / hotplug / PCI: Don't scan bridges managed by native hotplug")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=203617
Link: https://lore.kernel.org/r/20191030150545.19885-1-mika.westerberg@linux.intel.com
Reported-by: Valerio Passini <passini.valerio@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Thu, 24 Oct 2019 21:57:23 +0000 (23:57 +0200)]
ACPI: LPSS: Add dmi quirk for skipping _DEP check for some device-links
commit
6025e2fae3dde3c3d789d08f8ceacbdd9f90d471 upstream.
The iGPU / GFX0 device's _PS0 method on the ASUS T200TA depends on the
I2C1 controller (which is connected to the embedded controller). But unlike
in the T100TA/T100CHI this dependency is not listed in the _DEP of the GFX0
device.
This results in the dev_WARN_ONCE(..., "Transfer while suspended\n") call
in i2c-designware-master.c triggering and the AML code not working as it
should.
This commit fixes this by adding a dmi based quirk mechanism for devices
which miss a _DEP, and adding a quirk for the LNXVIDEO depending on the
I2C1 device on the Asus T200TA.
Fixes:
2d71ee0ce72f ("ACPI / LPSS: Add a device link from the GPU to the BYT I2C5 controller")
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: 4.20+ <stable@vger.kernel.org> # 4.20+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Thu, 24 Oct 2019 21:57:22 +0000 (23:57 +0200)]
ACPI: LPSS: Add LNXVIDEO -> BYT I2C1 to lpss_device_links
commit
b3b3519c04bdff91651d0a6deb79dbd4516b5d7b upstream.
Various Asus Bay Trail devices (T100TA, T100CHI, T200TA) have an embedded
controller connected to I2C1 and the iGPU (LNXVIDEO) _PS0/_PS3 methods
access it, so we need to add a consumer link from LNXVIDEO to I2C1 on
these devices to avoid suspend/resume ordering problems.
Fixes:
2d71ee0ce72f ("ACPI / LPSS: Add a device link from the GPU to the BYT I2C5 controller")
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: 4.20+ <stable@vger.kernel.org> # 4.20+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Thu, 24 Oct 2019 21:57:21 +0000 (23:57 +0200)]
ACPI: LPSS: Add LNXVIDEO -> BYT I2C7 to lpss_device_links
commit
cc18735f208565343a9824adeca5305026598550 upstream.
So far on Bay Trail (BYT) we only have been adding a device_link adding
the iGPU (LNXVIDEO) device as consumer for the I2C controller for the
PMIC for I2C5, but the PMIC only uses I2C5 on BYT CR (cost reduced) on
regular BYT platforms I2C7 is used and we were not adding the device_link
sometimes causing resume ordering issues.
This commit adds LNXVIDEO -> BYT I2C7 to the lpss_device_links table,
fixing this.
Fixes:
2d71ee0ce72f ("ACPI / LPSS: Add a device link from the GPU to the BYT I2C5 controller")
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: 4.20+ <stable@vger.kernel.org> # 4.20+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Shevchenko [Tue, 1 Oct 2019 14:27:21 +0000 (17:27 +0300)]
ACPI / utils: Move acpi_dev_get_first_match_dev() under CONFIG_ACPI
commit
a814dcc269830c9dbb8a83731cfc6fc5dd787f8d upstream.
We have a stub defined for the acpi_dev_get_first_match_dev() in acpi.h
for the case when CONFIG_ACPI=n.
Moreover, acpi_dev_put(), counterpart function, is already placed under
CONFIG_ACPI.
Thus, move acpi_dev_get_first_match_dev() under CONFIG_ACPI as well.
Fixes:
817b4d64da03 ("ACPI / utils: Introduce acpi_dev_get_first_match_dev() helper")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: 5.2+ <stable@vger.kernel.org> # 5.2+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hui Wang [Wed, 11 Dec 2019 05:13:21 +0000 (13:13 +0800)]
ALSA: hda/realtek - Line-out jack doesn't work on a Dell AIO
commit
5815bdfd7f54739be9abed1301d55f5e74d7ad1f upstream.
After applying the fixup ALC274_FIXUP_DELL_AIO_LINEOUT_VERB, the
Line-out jack works well. And instead of adding a new set of pin
definition in the pin_fixup_tbl, we put a more generic matching entry
in the fallback_pin_fixup_tbl.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20191211051321.5883-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Sakamoto [Mon, 9 Dec 2019 15:03:04 +0000 (00:03 +0900)]
ALSA: oxfw: fix return value in error path of isochronous resources reservation
commit
59a126aa3113fc23f03fedcafe3705f1de5aff50 upstream.
Even if isochronous resources reservation fails, error code doesn't return
in pcm.hw_params callback.
Cc: <stable@vger.kernel.org> #5.3+
Fixes:
4f380d007052 ("ALSA: oxfw: configure packet format in pcm.hw_params callback")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191209151655.GA8090@workstation
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Sakamoto [Mon, 9 Dec 2019 15:05:41 +0000 (00:05 +0900)]
ALSA: fireface: fix return value in error path of isochronous resources reservation
commit
480136343cbe89426d6c2ab74ffb4e3ee572c7ee upstream.
Even if isochronous resources reservation fails, error code doesn't return
in pcm.hw_params callback.
Cc: <stable@vger.kernel.org> #5.3+
Fixes:
55162d2bb0e8 ("ALSA: fireface: reserve/release isochronous resources in pcm.hw_params/hw_free callbacks")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191209151655.GA8090@workstation
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Hubbard [Thu, 31 Oct 2019 05:21:59 +0000 (22:21 -0700)]
cpufreq: powernv: fix stack bloat and hard limit on number of CPUs
commit
db0d32d84031188443e25edbd50a71a6e7ac5d1d upstream.
The following build warning occurred on powerpc 64-bit builds:
drivers/cpufreq/powernv-cpufreq.c: In function 'init_chip_info':
drivers/cpufreq/powernv-cpufreq.c:1070:1: warning: the frame size of
1040 bytes is larger than 1024 bytes [-Wframe-larger-than=]
This is with a cross-compiler based on gcc 8.1.0, which I got from:
https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/8.1.0/
The warning is due to putting 1024 bytes on the stack:
unsigned int chip[256];
...and it's also undesirable to have a hard limit on the number of
CPUs here.
Fix both problems by dynamically allocating based on num_possible_cpus,
as recommended by Michael Ellerman.
Fixes:
053819e0bf840 ("cpufreq: powernv: Handle throttling due to Pmax capping at chip level")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 4.10+ <stable@vger.kernel.org> # 4.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leonard Crestez [Tue, 24 Sep 2019 07:52:23 +0000 (10:52 +0300)]
PM / devfreq: Lock devfreq in trans_stat_show
commit
2abb0d5268ae7b5ddf82099b1f8d5aa8414637d4 upstream.
There is no locking in this sysfs show function so stats printing can
race with a devfreq_update_status called as part of freq switching or
with initialization.
Also add an assert in devfreq_update_status to make it clear that lock
must be held by caller.
Fixes:
39688ce6facd ("PM / devfreq: account suspend/resume for stats")
Cc: stable@vger.kernel.org
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Shishkin [Wed, 20 Nov 2019 13:08:06 +0000 (15:08 +0200)]
intel_th: pci: Add Tiger Lake CPU support
commit
6e6c18bcb78c0dc0601ebe216bed12c844492d0c upstream.
This adds support for the Trace Hub in Tiger Lake CPU.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191120130806.44028-4-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Shishkin [Wed, 20 Nov 2019 13:08:05 +0000 (15:08 +0200)]
intel_th: pci: Add Ice Lake CPU support
commit
6a1743422a7c0fda26764a544136cac13e5ae486 upstream.
This adds support for the Trace Hub in Ice Lake CPU.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191120130806.44028-3-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Shishkin [Wed, 20 Nov 2019 13:08:04 +0000 (15:08 +0200)]
intel_th: Fix a double put_device() in error path
commit
512592779a337feb5905d8fcf9498dbf33672d4a upstream.
Commit
a753bfcfdb1f ("intel_th: Make the switch allocate its subdevices")
factored out intel_th_subdevice_alloc() from intel_th_populate(), but got
the error path wrong, resulting in two instances of a double put_device()
on a freshly initialized, but not 'added' device.
Fix this by only doing one put_device() in the error path.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Fixes:
a753bfcfdb1f ("intel_th: Make the switch allocate its subdevices")
Reported-by: Wen Yang <wenyang@linux.alibaba.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@vger.kernel.org # v4.14+
Link: https://lore.kernel.org/r/20191120130806.44028-2-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Madhavan Srinivasan [Mon, 18 Nov 2019 03:44:52 +0000 (09:14 +0530)]
powerpc/perf: Disable trace_imc pmu
commit
249fad734a25889a4f23ed014d43634af6798063 upstream.
When a root user or a user with CAP_SYS_ADMIN privilege uses any
trace_imc performance monitoring unit events, to monitor application
or KVM threads, it may result in a checkstop (System crash).
The cause is frequent switching of the "trace/accumulation" mode of
the In-Memory Collection hardware (LDBAR).
This patch disables the trace_imc PMU unit entirely to avoid
triggering the checkstop. A future patch will reenable it at a later
stage once a workaround has been developed.
Fixes:
012ae244845f ("powerpc/perf: Trace imc PMU functions")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Tested-by: Hariharan T.S. <hari@linux.ibm.com>
[mpe: Add pr_info_once() so dmesg shows the PMU has been disabled]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191118034452.9939-1-maddy@linux.vnet.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Boris Brezillon [Fri, 29 Nov 2019 13:59:05 +0000 (14:59 +0100)]
drm/panfrost: Open/close the perfcnt BO
commit
0a5239985a3bc084738851afdf3fceb7d5651b0c upstream.
Commit
a5efb4c9a562 ("drm/panfrost: Restructure the GEM object creation")
moved the drm_mm_insert_node_generic() call to the gem->open() hook,
but forgot to update perfcnt accordingly.
Patch the perfcnt logic to call panfrost_gem_open/close() where
appropriate.
Fixes:
a5efb4c9a562 ("drm/panfrost: Restructure the GEM object creation")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191129135908.2439529-6-boris.brezillon@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Yan [Thu, 7 Nov 2019 02:02:44 +0000 (10:02 +0800)]
perf tests: Fix out of bounds memory access
commit
af8490eb2b33684e26a0a927a9d93ae43cd08890 upstream.
The test case 'Read backward ring buffer' failed on 32-bit architectures
which were found by LKFT perf testing. The test failed on arm32 x15
device, qemu_arm32, qemu_i386, and found intermittent failure on i386;
the failure log is as below:
50: Read backward ring buffer :
--- start ---
test child forked, pid 510
Using CPUID GenuineIntel-6-9E-9
mmap size
1052672B
mmap size 8192B
Finished reading overwrite ring buffer: rewind
free(): invalid next size (fast)
test child interrupted
---- end ----
Read backward ring buffer: FAILED!
The log hints there have issue for memory usage, thus free() reports
error 'invalid next size' and directly exit for the case. Finally, this
issue is root caused as out of bounds memory access for the data array
'evsel->id'.
The backward ring buffer test invokes do_test() twice. 'evsel->id' is
allocated at the first call with the flow:
test__backward_ring_buffer()
`-> do_test()
`-> evlist__mmap()
`-> evlist__mmap_ex()
`-> perf_evsel__alloc_id()
So 'evsel->id' is allocated with one item, and it will be used in
function perf_evlist__id_add():
evsel->id[0] = id
evsel->ids = 1
At the second call for do_test(), it skips to initialize 'evsel->id'
and reuses the array which is allocated in the first call. But
'evsel->ids' contains the stale value. Thus:
evsel->id[1] = id -> out of bound access
evsel->ids = 2
To fix this issue, we will use evlist__open() and evlist__close() pair
functions to prepare and cleanup context for evlist; so 'evsel->id' and
'evsel->ids' can be initialized properly when invoke do_test() and avoid
the out of bounds memory access.
Fixes:
ee74701ed8ad ("perf tests: Add test to check backward ring buffer")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: stable@vger.kernel.org # v4.10+
Link: http://lore.kernel.org/lkml/20191107020244.2427-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gao Xiang [Sun, 1 Dec 2019 08:01:09 +0000 (16:01 +0800)]
erofs: zero out when listxattr is called with no xattr
commit
926d1650176448d7684b991fbe1a5b1a8289e97c upstream.
As David reported [1], ENODATA returns when attempting
to modify files by using EROFS as an overlayfs lower layer.
The root cause is that listxattr could return unexpected
-ENODATA by mistake for inodes without xattr. That breaks
listxattr return value convention and it can cause copy
up failure when used with overlayfs.
Resolve by zeroing out if no xattr is found for listxattr.
[1] https://lore.kernel.org/r/CAEvUa7nxnby+rxK-KRMA46=exeOMApkDMAV08AjMkkPnTPV4CQ@mail.gmail.com
Link: https://lore.kernel.org/r/20191201084040.29275-1-hsiangkao@aol.com
Fixes:
cadf1ccf1b00 ("staging: erofs: add error handling for xattr submodule")
Cc: <stable@vger.kernel.org> # 4.19+
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marcelo Tosatti [Fri, 6 Dec 2019 15:07:41 +0000 (13:07 -0200)]
cpuidle: use first valid target residency as poll time
commit
36fcb4292473cb9c9ce7706d038bcf0eda5cabeb upstream.
Commit
259231a04561 ("cpuidle: add poll_limit_ns to cpuidle_device
structure") changed, by mistake, the target residency from the first
available sleep state to the last available sleep state (which should
be longer).
This might cause excessive polling.
Fixes:
259231a04561 ("cpuidle: add poll_limit_ns to cpuidle_device structure")
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rafael J. Wysocki [Thu, 10 Oct 2019 21:37:39 +0000 (23:37 +0200)]
cpuidle: teo: Fix "early hits" handling for disabled idle states
commit
159e48560f51d9c2aa02d762a18cd24f7868ab27 upstream.
The TEO governor uses idle duration "bins" defined in accordance with
the CPU idle states table provided by the driver, so that each "bin"
covers the idle duration range between the target residency of the
idle state corresponding to it and the target residency of the closest
deeper idle state. The governor collects statistics for each bin
regardless of whether or not the idle state corresponding to it is
currently enabled.
In particular, the "early hits" metric measures the likelihood of a
situation in which the idle duration measured after wakeup falls into
to given bin, but the time till the next timer (sleep length) falls
into a bin corresponding to one of the deeper idle states. It is
used when the "hits" and "misses" metrics indicate that the state
"matching" the sleep length should not be selected, so that the state
with the maximum "early hits" value is selected instead of it.
If the idle state corresponding to the given bin is disabled, it
cannot be selected and if it turns out to be the one that should be
selected, a shallower idle state needs to be used instead of it.
Nevertheless, the metrics collected for the bin corresponding to it
are still valid and need to be taken into account as though that
state had not been disabled.
As far as the "early hits" metric is concerned, teo_select() tries to
take disabled states into account, but the state index corresponding
to the maximum "early hits" value computed by it may be incorrect.
Namely, it always uses the index of the previous maximum "early hits"
state then, but there may be enabled idle states closer to the
disabled one in question. In particular, if the current candidate
state (whose index is the idx value) is closer to the disabled one
and the "early hits" value of the disabled state is greater than the
current maximum, the index of the current candidate state (idx)
should replace the "maximum early hits state" index.
Modify the code to handle that case correctly.
Fixes:
b26bf6ab716f ("cpuidle: New timer events oriented governor for tickless systems")
Reported-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rafael J. Wysocki [Thu, 10 Oct 2019 21:36:15 +0000 (23:36 +0200)]
cpuidle: teo: Consider hits and misses metrics of disabled states
commit
e43dcf20215f0287ea113102617ca04daa76b70e upstream.
The TEO governor uses idle duration "bins" defined in accordance with
the CPU idle states table provided by the driver, so that each "bin"
covers the idle duration range between the target residency of the
idle state corresponding to it and the target residency of the closest
deeper idle state. The governor collects statistics for each bin
regardless of whether or not the idle state corresponding to it is
currently enabled.
In particular, the "hits" and "misses" metrics measure the likelihood
of a situation in which both the time till the next timer (sleep
length) and the idle duration measured after wakeup fall into the
given bin. Namely, if the "hits" value is greater than the "misses"
one, that situation is more likely than the one in which the sleep
length falls into the given bin, but the idle duration measured after
wakeup falls into a bin corresponding to one of the shallower idle
states.
If the idle state corresponding to the given bin is disabled, it
cannot be selected and if it turns out to be the one that should be
selected, a shallower idle state needs to be used instead of it.
Nevertheless, the metrics collected for the bin corresponding to it
are still valid and need to be taken into account as though that
state had not been disabled.
For this reason, make teo_select() always use the "hits" and "misses"
values of the idle duration range that the sleep length falls into
even if the specific idle state corresponding to it is disabled and
if the "hits" values is greater than the "misses" one, select the
closest enabled shallower idle state in that case.
Fixes:
b26bf6ab716f ("cpuidle: New timer events oriented governor for tickless systems")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rafael J. Wysocki [Thu, 10 Oct 2019 21:32:59 +0000 (23:32 +0200)]
cpuidle: teo: Rename local variable in teo_select()
commit
4f690bb8ce4cc5d3fabe3a8e9c2401de1554cdc1 upstream.
Rename a local variable in teo_select() in preparation for subsequent
code modifications, no intentional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rafael J. Wysocki [Thu, 10 Oct 2019 21:32:17 +0000 (23:32 +0200)]
cpuidle: teo: Ignore disabled idle states that are too deep
commit
069ce2ef1a6dd84cbd4d897b333e30f825e021f0 upstream.
Prevent disabled CPU idle state with target residencies beyond the
anticipated idle duration from being taken into account by the TEO
governor.
Fixes:
b26bf6ab716f ("cpuidle: New timer events oriented governor for tickless systems")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhenzhong Duan [Wed, 23 Oct 2019 01:57:14 +0000 (09:57 +0800)]
cpuidle: Do not unset the driver if it is there already
commit
918c1fe9fbbe46fcf56837ff21f0ef96424e8b29 upstream.
Fix __cpuidle_set_driver() to check if any of the CPUs in the mask has
a driver different from drv already and, if so, return -EBUSY before
updating any cpuidle_drivers per-CPU pointers.
Fixes:
82467a5a885d ("cpuidle: simplify multiple driver support")
Cc: 3.11+ <stable@vger.kernel.org> # 3.11+
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>