Kim Phillips [Tue, 15 Jan 2008 20:05:14 +0000 (14:05 -0600)]
mpc83xx: fix QE ETHPRIMEs to correct 'FSL UEC0' value
continuation of commit
b96c83d4ae475a70ef2635cd0e748174c44c8601
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Kim Phillips [Tue, 15 Jan 2008 15:51:12 +0000 (09:51 -0600)]
mpc83xx: clean up mpc8360emds.c warnings
mpc8360emds.c: In function 'ft_board_setup':
mpc8360emds.c:327: warning: assignment makes pointer from integer without a cast
mpc8360emds.c:329: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast
mpc8360emds.c:334: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast
mpc8360emds.c:341: warning: assignment makes pointer from integer without a cast
mpc8360emds.c:343: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast
mpc8360emds.c:348: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Kim Phillips [Mon, 14 Jan 2008 22:14:46 +0000 (16:14 -0600)]
mpc83xx: fix phy-connection-type fixup code
use tree passed to us in local blob, not global fdt.
Also use fdt_path_offset to convert to relative offset, since absolute
reference is needed to check for rgmii-id mode string value.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Kumar Gala [Mon, 14 Jan 2008 15:01:40 +0000 (09:01 -0600)]
mpc83xx: fix mpc8313/mpc8315/mpc8349itx Makefiles for silent build (with -s)
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Poonam Aggrwal [Mon, 14 Jan 2008 04:11:14 +0000 (09:41 +0530)]
Changes in uboot DDR configuration for MPC8313eRDB
These changes were identified by HighSmith Bill ,Mazzyar and Joseph for
DDR configuration in u-boot code. Some are related to performance, some
affect stability and some correct few basic errors in the current
configuration.
The changes have been tested and found to give better memory latency
figures on MPC8313eRDB.LMBench figures prove it.
The changes are:
- CS0_CONFIG[ AP_n_EN] is changed from 1 to 0
(this may improve performance for application with many read
or write to open pages).
- CS0_CONFIG[ODT_WR_CFG] is currently changed from 100 to
001 (activating all the CS when only one is used may cause
unwanted noise on the system)
- TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 8clks (based on
Tras=45ns)
- TIMING_CFG_1[REFREC] changed from 21 clks to 18clks.
- TIMING_CFG_2[AL] value changed from 0 setting to 1 clk to
comply with the 3 ODT clk requirements)
- TIMING_CFG_2[CPO] was set to a reserved value, changed to RL+3/4.
- TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 6clks.
- DDR_SDRAM_MODE[AL]changed from 0 to 1.
- DDR_SDRAM_MODE[WRREC] changed from 1 clk to 3 clks.
- DDR_SDRAM_INTERVAL[REFINT] is changed from 0x0320 to 0x0510.
- DDR_SDRAM_INTERVAL[BSTOPRE] is changed from 0x64 to 0x0500.
The patch is based of git://www.denx.de/git/u-boot-mpc83xx.git
The last commit on this tree was
6775c68683a53c7abc778774641aac6f833a2cbf
Signed-off-by: Poonam Aggrwal-b10812 <b10812@freescale.com>
Cc: Bill HighSmith <Bill.Highsmith@freescale.com>
Cc: Razzaz Mazyar <MRazzaz@freescale.com>
Cc: Josep P J <PJ.Joseph@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Jerry Van Baren [Sat, 12 Jan 2008 18:24:14 +0000 (13:24 -0500)]
Enable the isdram command on the MPC8360EMDS board
The isdram command prints out decoded information the "serial presence
detect" (SPD) chip on the SDRAM SIMMs. This can be very helpful when
debugging memory configuration problems.
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Dave Liu [Fri, 11 Jan 2008 10:48:24 +0000 (18:48 +0800)]
mpc83xx: Add the support for MPC8315ERDB board
The features list:
- Boot from NOR Flash
- DDR2 266MHz hardcoded configuration
- Local bus NOR Flash R/W operation
- I2C, UART, MII and RTC
- eTSEC0/1 support
- PCI host
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Dave Liu [Fri, 11 Jan 2008 10:46:50 +0000 (18:46 +0800)]
mpc83xx: Add config of eTSEC emergency priority in SPCR
The TSEC emergency priority definition of 831x/837x
is different than the definition of 834x in SPCR register.
Add the other config of TSEC emergency priority into
cpu_init.c
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Dave Liu [Fri, 11 Jan 2008 10:42:19 +0000 (18:42 +0800)]
mpc83xx: Remove cache config from MPC8360ERDK.h
The MPC8360ERDK board support patch is added before
the commit
2c5b48fc205c3e2752910da8f39209ed075929e5
so, miss clean up it.
The patch clean up the miss cache config.
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Anton Vorontsov [Mon, 14 Jan 2008 20:09:32 +0000 (23:09 +0300)]
nand: FSL UPM NAND driver
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Kyungmin Park [Mon, 14 Jan 2008 23:59:44 +0000 (08:59 +0900)]
OneNAND: Separate U-Boot dependent code from OneNAND
OneNAND: Separate U-Boot dependent code from OneNAND
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Wolfgang Denk [Tue, 15 Jan 2008 23:01:01 +0000 (00:01 +0100)]
LWMON5: enable hush shell as command line parser
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Tue, 15 Jan 2008 16:22:28 +0000 (17:22 +0100)]
ADS5121: disable watchdog; enable image timestamps
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Tue, 15 Jan 2008 16:21:28 +0000 (17:21 +0100)]
TK885D: fixes for bigger flash sector sizes on new modules;
adjust default environment;
disable SCC ethernet (not used on this board).
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Mon, 14 Jan 2008 09:48:28 +0000 (10:48 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-ppc4xx
Dave Liu [Mon, 14 Jan 2008 03:12:01 +0000 (11:12 +0800)]
QE: fix compile warning
qe.c: In function 'qe_upload_firmware':
qe.c:390: warning: pointer targets in passing argument 2
uec.c: In function 'uec_initialize':
uec.c:1236: warning: 'uec_info' may be used uninitialized
Signed-off-by: Dave Liu <daveliu@freescale.com>
Stefan Roese [Mon, 14 Jan 2008 09:05:05 +0000 (10:05 +0100)]
ppc4xx: Update Kilauea CPLD configuration with USB PHY reset bit
Now that bit 29 is the USB PHY reset bit, update the Kilauea port
to remove the USB PHY reset after powerup. The CPLD will keep the
USB PHY in reset (active low) until the bit is set to 1 in
board_early_init_f().
Signed-off-by: Stefan Roese <sr@denx.de>
Wolfgang Denk [Sun, 13 Jan 2008 22:26:45 +0000 (23:26 +0100)]
ARM: update mach-types.h from 2.6.24-rc7 Linux kernel tree
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sun, 13 Jan 2008 22:37:50 +0000 (23:37 +0100)]
ADS5121: Fix typo in ads5121.c, adjust default environment
Signed-off-by: Wolfgang Denk <wd@denx.de>
John Rigby [Sat, 25 Aug 2007 00:18:43 +0000 (18:18 -0600)]
ADS5121: MAX slew rate for PATA pins
Signed-off-by: John Rigby <jrigby@freescale.com>
Wolfgang Denk [Sun, 13 Jan 2008 20:05:52 +0000 (21:05 +0100)]
Fix Makefile dependency problem with parallel builds.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sun, 13 Jan 2008 18:51:39 +0000 (19:51 +0100)]
MPC8544DS: fix board Makefile for silent build (with -s)
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sun, 13 Jan 2008 15:44:08 +0000 (16:44 +0100)]
PMC440 board: fix board Makefile for out-of-tree building
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sun, 13 Jan 2008 15:07:44 +0000 (16:07 +0100)]
Makalu: fix compile warning
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sun, 13 Jan 2008 14:59:21 +0000 (15:59 +0100)]
Merge branch 'master' of git+ssh://10.10.0.7/home/wd/git/u-boot/master
Jean-Christophe PLAGNIOL-VILLARD [Sun, 13 Jan 2008 11:36:12 +0000 (12:36 +0100)]
cmd_nand : fix compiler warning.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Michael Schwingen [Sat, 12 Jan 2008 19:29:47 +0000 (20:29 +0100)]
CFI: Fix CONFIG_FLASH_CFI_LEGACY compilation
Signed-off-by: Michael Schwingen <michael@schwingen.org>
Acked-by: Stefan Roese <sr@denx.de>
Stefan Roese [Sun, 13 Jan 2008 14:04:37 +0000 (15:04 +0100)]
Merge branch 'master' of /home/stefan/git/u-boot/u-boot
Wolfgang Denk [Sun, 13 Jan 2008 01:19:44 +0000 (02:19 +0100)]
MPC8360ERDK: fix incorrect initialization of CFG_I2C_NOPROBES
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sun, 13 Jan 2008 01:19:13 +0000 (02:19 +0100)]
MPC8xx FEC driver: fix compiler warning.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sat, 12 Jan 2008 23:59:21 +0000 (00:59 +0100)]
Fix Makefile dependencies issues; allow silent build
- get rid of "version" target whichdidn't really work
- make autoconf.mk depend on version_autogenerated.h to make sure
to rebuild files as needed
- add XECHO macro to allow for silent build using "make -s"
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sat, 12 Jan 2008 23:55:47 +0000 (00:55 +0100)]
ADS5121e: fix compile warning
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sat, 12 Jan 2008 23:55:18 +0000 (00:55 +0100)]
MUNICes: fix board Makefile for remote build directory
Signed-off-by: Wolfgang Denk <wd@denx.de>
Oliver Weber [Wed, 9 Jan 2008 16:04:38 +0000 (17:04 +0100)]
MPC5200: don't use hardcoded MBAR address in Bestcomm firmware
Signed-off-by: Oliver Weber <almoeli@gmx.de>
Andreas Engel [Wed, 9 Jan 2008 16:10:56 +0000 (17:10 +0100)]
Make bootretry work when command line editing is enabled
Currently, when CONFIG_CMDLINE_EDITING is set, bootretry doesn't work.
This patch fixes the problem.
Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
Larry Johnson [Sat, 12 Jan 2008 04:26:18 +0000 (23:26 -0500)]
Refactor code for "i2c sdram" command
Signed-off-by: Larry Johnson <lrj@acm.org>
Larry Johnson [Fri, 11 Jan 2008 03:23:39 +0000 (22:23 -0500)]
Fix "i2c sdram" command for DDR2 DIMMs
Many of the SPD bytes for DDR2 SDRAM are not interpreted correctly by the
"i2c sdram" command. This patch provides correct alternative
interpretations when DDR2 memory is detected.
Signed-off-by: Larry Johnson <lrj@acm.org>
Wolfgang Denk [Sat, 12 Jan 2008 19:31:39 +0000 (20:31 +0100)]
Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections
With recent toolchain versions, some boards would not build because
or errors like this one (here for ocotea board when building with
ELDK 4.2 beta):
ppc_4xx-ld: section .bootpg [
fffff000 ->
fffff23b] overlaps section .bss [
fffee900 ->
fffff8ab]
For many boards, the .bss section is big enough that it wraps around
at the end of the address space (0xFFFFFFFF), so the problem will not
be visible unless you use a 64 bit tool chain for development. On
some boards however, changes to the code size (due to different
optimizations) we bail out with section overlaps like above.
The fix is to add the NOLOAD attribute to the .bss and .sbss
sections, telling the linker that .bss does not consume any space in
the image.
Signed-off-by: Wolfgang Denk <wd@denx.de>
TsiChung Liew [Sat, 12 Jan 2008 02:42:58 +0000 (20:42 -0600)]
USB: Add Philips 1561 PCI-OHCI ids
(needed for M5475EVB)
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Wolfgang Denk [Sat, 12 Jan 2008 14:51:34 +0000 (15:51 +0100)]
Add MAINTAINERS entries for ids8247, jupiter, municse, sc3 and uc101
boards.
Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Grzegorz Bernacki [Fri, 11 Jan 2008 11:03:43 +0000 (12:03 +0100)]
MPC512X: Cleanup bus clock names.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Grzegorz Bernacki [Tue, 8 Jan 2008 16:16:59 +0000 (17:16 +0100)]
MPC512X: Fixed typo in macro name.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Grzegorz Bernacki [Tue, 8 Jan 2008 16:16:15 +0000 (17:16 +0100)]
ads5121: Added support for FDT.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Wolfgang Denk [Sat, 12 Jan 2008 00:05:50 +0000 (01:05 +0100)]
Coding Style cleanup; update CHANGELOG.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Heiko Schocher [Fri, 11 Jan 2008 14:15:17 +0000 (15:15 +0100)]
Fixed syntax error in function init_e300_core() of mpc83xx/start.S if
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Fri, 11 Jan 2008 14:15:16 +0000 (15:15 +0100)]
MUNICes: Set the right CFG_DEFAULT_MBAR value.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Fri, 11 Jan 2008 14:15:15 +0000 (15:15 +0100)]
added the config File for the MUNICes board.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Fri, 11 Jan 2008 14:15:14 +0000 (15:15 +0100)]
added basic support for the MUNICes board.
Signed-off-by: Heiko Schocher <hs@denx.de>
Wolfgang Denk [Fri, 11 Jan 2008 23:39:37 +0000 (00:39 +0100)]
Update CHANGELOG and MAINTAINERS files.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Anatolij Gustschin [Fri, 11 Jan 2008 01:15:02 +0000 (02:15 +0100)]
Fix compilation problem in common/cmd_bmp.c
common/cmd_bmp.c fails to compile if CONFIG_VIDEO_BMP_GZIP
isn't defined. This patch fix this.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Heiko Schocher [Fri, 11 Jan 2008 00:12:09 +0000 (01:12 +0100)]
Fix defaultconfig for the mgcoge board.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Fri, 11 Jan 2008 00:12:08 +0000 (01:12 +0100)]
Added support for the mgcoge board from keymile.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Fri, 11 Jan 2008 00:12:07 +0000 (01:12 +0100)]
Enable SMC microcode relocation patch for SMC1.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Fri, 11 Jan 2008 00:12:06 +0000 (01:12 +0100)]
Added support for the mgsuvd board from keymile.
Signed-off-by: Heiko Schocher <hs@denx.de>
James Yang [Thu, 10 Jan 2008 22:02:07 +0000 (16:02 -0600)]
Fix 64-bit vsprintf.
There were some size and unsigned problems.
Also add support for "ll" size modifier in format string like glibc
Signed-off-by: James Yang <James.Yang@freescale.com>
Acked-by: Jon Loeliger <jdl@freescale.com>
Larry Johnson [Wed, 9 Jan 2008 17:42:35 +0000 (12:42 -0500)]
Remove superfluous preprocessor conditionals from LM73 driver
(1) Remove unused symbol "CFG_EEPROM_PAGE_WRITE_ENABLE".
(2) Use conditional Makefile.o.
Signed-off-by: Larry Johnson <lrj@acm.org>
Guennadi Liakhovetski [Thu, 10 Jan 2008 16:59:07 +0000 (17:59 +0100)]
Add support for the TK885D baseboard from TELE-DATA
The TK885D board uses a TQM885D module from TQ, this port adds an
own configuration file and adds a last_stage_init() method to
configure the two PHYs, depending on the phy_auto_nego environment
variable.
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Wolfgang Denk [Fri, 11 Jan 2008 23:22:05 +0000 (00:22 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-video
Wolfgang Denk [Fri, 11 Jan 2008 23:13:37 +0000 (00:13 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-ppc4xx
Wolfgang Denk [Fri, 11 Jan 2008 23:04:01 +0000 (00:04 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-mpc83xx
Wolfgang Denk [Fri, 11 Jan 2008 23:02:26 +0000 (00:02 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-mpc86xx
Wolfgang Denk [Fri, 11 Jan 2008 22:53:26 +0000 (23:53 +0100)]
Merge ../custodians
Kumar Gala [Thu, 10 Jan 2008 08:22:05 +0000 (02:22 -0600)]
Fix compiler warning
main.c: In function 'readline_into_buffer':
main.c:927: warning: unused variable 'p_buf'
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Anatolij Gustschin [Fri, 11 Jan 2008 13:30:01 +0000 (14:30 +0100)]
Add Fujitsu CoralP/Lime video driver
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Rodolfo Giometti <giometti@linux.it>
Anatolij Gustschin [Fri, 11 Jan 2008 01:39:47 +0000 (02:39 +0100)]
Fix video console newline and carriage return handling
Lines of the lenght CONSOLE_COLS or greater than CONSOLE_COLS
are not displayed correctly. This is an attempt to fix
this issue. Also add carriage return handling.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Rodolfo Giometti <giometti@linux.it>
Stefan Roese [Fri, 11 Jan 2008 14:53:58 +0000 (15:53 +0100)]
ppc4xx: Fix sdram init on Sequoia boards
Clear possible errors in MCSR resulting from data-eye-search.
If not done, then we could get an interrupt later on when
exceptions are enabled.
Signed-off-by: Stefan Roese <sr@denx.de>
Anatolij Gustschin [Fri, 11 Jan 2008 14:31:09 +0000 (15:31 +0100)]
ppc4xx: Rework Lime support for lwmon5
Rework Lime support for lwmon5 using new video driver
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Matthias Fuchs [Fri, 11 Jan 2008 13:55:16 +0000 (14:55 +0100)]
ppc4xx: Update PMC440 config file
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Matthias Fuchs [Fri, 11 Jan 2008 13:55:08 +0000 (14:55 +0100)]
ppx4xx: Fix sdram init on PMC440 boards
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Dave Liu [Thu, 10 Jan 2008 15:09:33 +0000 (23:09 +0800)]
mpc83xx: Fix the bug of 266MHz data rate DDR
The DDR doesn't work on the 266MHz data rate,
the patch fix the bug.
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Dave Liu [Thu, 10 Jan 2008 15:08:26 +0000 (23:08 +0800)]
mpc83xx: Make the code more readable
Format the code, make it more readable
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Dave Liu [Thu, 10 Jan 2008 15:07:23 +0000 (23:07 +0800)]
mpc83xx: Reduce the latency of DDR
Reduce the AL from 2 to 1 clock to improve the performance.
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Dave Liu [Thu, 10 Jan 2008 15:06:05 +0000 (23:06 +0800)]
mpc83xx: Fix the wrong definition of MPC8315E
According to the latest user manual of MPC8315E,
1) The SVCOD of HRCWL is different than 837x
2) The SCCR has changes
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Dave Liu [Thu, 10 Jan 2008 15:05:00 +0000 (23:05 +0800)]
mpc83xx: Fix the typo in mpc83xx.h
The SPCR about TSEC priority is wrong.
Signed-off-by: Michael Barkowski <Michael.Barkowski@freescale.com>
Signed-off-by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com>
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Dave Liu [Thu, 10 Jan 2008 15:04:13 +0000 (23:04 +0800)]
mpc83xx: Fix the typo in global data struct
Fix the typo in global_data.h
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Dave Liu [Thu, 10 Jan 2008 15:03:03 +0000 (23:03 +0800)]
mpc83xx: Remove cache config from config.h
clean up the cache config from configs.h of board
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Anton Vorontsov [Wed, 9 Jan 2008 17:57:47 +0000 (20:57 +0300)]
mpc83xx: add support for the MPC8360E-RDK
This is MPC8360E based board with:
- 256MB fixed SDRAM;
- 8MB Intel Strata NOR flash;
- StMICRO 64MiB NAND flash;
- two 10/100/1000 ethernet ports connected via Broadcom
BCM5481 PHYs;
- two 10/100 ethernet ports connected via National
DP83848 PHYs;
- one PCI and one miniPCI slots;
- four serial ports (two NS16550-compatible, two UCCs);
- four USB ports working through MPC8360E "FHCI" USB controller;
- Fujitsu MB86277 graphics controller;
- Analog to Digital Converter/Touchscreen controller, AD7843
connected to SPI.
Features not supported in this patch are:
- StMICRO 64MiB NAND flash (patch sent);
- MINT framebuffer initialization (patch is pending);
- Fetching production information from the EEPROM via I2C;
- FHCI USB;
- Two slow UCCs used as RS-485 UARTs.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Anton Vorontsov [Wed, 9 Jan 2008 17:57:40 +0000 (20:57 +0300)]
mpc83xx: add "fsl, qe" compatible fixups
New device trees will use "fsl,qe" compatible properties.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Kim Phillips [Wed, 9 Jan 2008 21:24:06 +0000 (15:24 -0600)]
mpc83xx: add missing CONFIG_HAS_ETH0 defines
the new libfdt code only updates eth0 if CONFIG_HAS_ETH0
is defined; add the define to the missing board configs.
Thanks to Emilian Medve for finding this.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Jon Loeliger [Thu, 10 Jan 2008 20:28:18 +0000 (14:28 -0600)]
Merge commit 'wd/master'
Becky Bruce [Thu, 10 Jan 2008 20:00:28 +0000 (14:00 -0600)]
86xx: Support 2GB DIMMs
Configure the number of bits used to address the banks inside the SDRAM
device. The default register value of 0 means 2 bits to address 4 banks.
Higher capacity devices like a 2GB DIMM require 3 bits to address 8 banks.
Signed-off-by: Becky Bruce <bgill@freescale.com>
Niklaus Giger [Thu, 10 Jan 2008 17:50:33 +0000 (18:50 +0100)]
ppc4xx: Make Sequoia boot vxWorks
vxWorks expects in
TLB 0 a entry for the Machine Check interrupt
TLB 1 a entry for the RAM
TLB 2 a entry for the EBC
TLB 3 a entry for the boot flash
After changing the baudrate to 9600 I had no problems to boot the
vxWorks image as distributed by WindRiver (Revision 2.0/1 from
June 18, 2007)
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
Larry Johnson [Thu, 10 Jan 2008 04:10:27 +0000 (23:10 -0500)]
ppc4xx: Fix dflush() to restore DVLIM register
Signed-off-by: Larry Johnson <lrj@acm.org>
Jean-Christophe PLAGNIOL-VILLARD [Thu, 10 Jan 2008 08:52:44 +0000 (03:52 -0500)]
Nios2: remove common/cmd_bdinfo.c unused variable.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>
Ben Warren [Wed, 9 Jan 2008 23:15:53 +0000 (18:15 -0500)]
Fix Ethernet init() return codes
Change return values of init() functions in all Ethernet drivers to conform
to the following:
>=0: Success
<0: Failure
All drivers going forward should return 0 on success. Current drivers that
return 1 on success were left as-is to minimize changes.
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-By: Timur Tabi <timur@freescale.com>
Wolfgang Denk [Wed, 9 Jan 2008 23:55:14 +0000 (00:55 +0100)]
Coding Style cleanup; update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Wed, 9 Jan 2008 23:49:59 +0000 (00:49 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-mpc85xx
Kim Phillips [Wed, 9 Jan 2008 22:56:54 +0000 (16:56 -0600)]
Add QE brg freq and correct qe bus freq fdt update code
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Wolfgang Denk [Wed, 9 Jan 2008 22:43:10 +0000 (23:43 +0100)]
Merge branch 'master' of git+ssh://10.10.0.7/home/wd/git/u-boot/master
Andy Fleming [Wed, 9 Jan 2008 22:34:51 +0000 (16:34 -0600)]
Remove cache config from ATUM8548 and sbc8548 configs
These boards weren't updated by Kumar's config patch because they
weren't in the tree, yet.
Signed-off-by: Andy Fleming <afleming@freescale.com>
Timur Tabi [Mon, 7 Jan 2008 19:31:19 +0000 (13:31 -0600)]
85xx: add ability to upload QE firmware
Define the layout of a binary blob that contains a QE firmware and instructions
on how to upload it. Add function qe_upload_firmware() to parse the blob and
perform the actual upload. Add command-line command "qe fw" to take a firmware
blob in memory and upload it. Update ft_cpu_setup() on 85xx to create the
'firmware' device tree node if U-Boot has uploaded a firmware. Fully define
'struct rsp' in immap_qe.h to include the actual RISC Special Registers.
Signed-off-by: Timur Tabi <timur@freescale.com>
Kumar Gala [Tue, 8 Jan 2008 07:22:21 +0000 (01:22 -0600)]
85xx: Remove cache config from configs.h
Either use the standard defines in asm/cache.h or grab the information
at runtime from the L1CFG SPR.
Also, minor cleanup in cache.h to make the code a bit more readable.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
robert lazarski [Fri, 21 Dec 2007 15:39:27 +0000 (10:39 -0500)]
mpc85xx: Add support for ATUM8548 (updated)
Add support for Instituto Atlantico's ATUM8548 board
Signed-off-by: robert lazarski <robertlazarski@gmail.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
robert lazarski [Fri, 21 Dec 2007 15:36:37 +0000 (10:36 -0500)]
mpc85xx: Add support for ATUM8548 (updated)
Add support for Instituto Atlantico's ATUM8548 board
Signed-off-by: robert lazarski <robertlazarski@gmail.com>
Joe Hamman [Thu, 13 Dec 2007 12:45:14 +0000 (06:45 -0600)]
mpc85xx: Add support for SBC8548 (updated)
Add support for Wind River's SBC8548 reference board.
Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
Joe Hamman [Thu, 13 Dec 2007 12:45:08 +0000 (06:45 -0600)]
mpc85xx: Add support for SBC8548 (updated)
Add support for Wind River's SBC8548 reference board.
Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
Signed-off by: Andy Fleming <afleming@freescale.com>
Anton Vorontsov [Mon, 22 Oct 2007 15:58:19 +0000 (19:58 +0400)]
MPC8568E-MDS: set up QE pario for UART1
To use UART1 on the MPC8568E-MDS, QE pario pins PC[0:3] should
be set up appropriately.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Anton Vorontsov [Mon, 22 Oct 2007 14:12:46 +0000 (18:12 +0400)]
MPC8568E-MDS: reset UCCs to use them reliably
In order to use GETH1 and GETH2 on the MPC8568E-MDS, we should reset
UCCs.
p.s Similar code exists in the Linux kernel board file (for capability
reasons with older U-Boots), but should be removed some day.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Kumar Gala [Wed, 19 Dec 2007 07:18:15 +0000 (01:18 -0600)]
Reworked FSL Book-E TLB macros to be more readable
The old macros made it difficult to know what WIMGE and perm bits
were set for a TLB entry. Actually use the bit masks for these items
since they are only a single bit.
Also moved the macros into mmu.h out of e500.h since they aren't specific
to e500.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 19 Dec 2007 05:21:51 +0000 (23:21 -0600)]
Use FSL Book-E MMU macros from Linux Kernel
Grab the FSL Book-E MAS register macros from Linux. Also added
defines for page sizes up to 4TB and removed SHAREN since it doesnt
really exist.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
projects / kernel / u-boot.git / log