powerpc/kasan: Silence KASAN warnings in __get_wchan()

[ Upstream commit a1b29ba2f2c171b9bea73be993bfdf0a62d37d15 ]

The following KASAN warning was reported in our kernel.

  BUG: KASAN: stack-out-of-bounds in get_wchan+0x188/0x250
  Read of size 4 at addr d216f958 by task ps/14437

  CPU: 3 PID: 14437 Comm: ps Tainted: G           O      5.10.0 #1
  Call Trace:
  [daa63858] [c0654348] dump_stack+0x9c/0xe4 (unreliable)
  [daa63888] [c035cf0c] print_address_description.constprop.3+0x8c/0x570
  [daa63908] [c035d6bc] kasan_report+0x1ac/0x218
  [daa63948] [c00496e8] get_wchan+0x188/0x250
  [daa63978] [c0461ec8] do_task_stat+0xce8/0xe60
  [daa63b98] [c0455ac8] proc_single_show+0x98/0x170
  [daa63bc8] [c03cab8c] seq_read_iter+0x1ec/0x900
  [daa63c38] [c03cb47c] seq_read+0x1dc/0x290
  [daa63d68] [c037fc94] vfs_read+0x164/0x510
  [daa63ea8] [c03808e4] ksys_read+0x144/0x1d0
  [daa63f38] [c005b1dc] ret_from_syscall+0x0/0x38
  --- interrupt: c00 at 0x8fa8f4
      LR = 0x8fa8cc

  The buggy address belongs to the page:
  page:98ebcdd2 refcount:0 mapcount:0 mapping:00000000 index:0x2 pfn:0x1216f
  flags: 0x0()
  raw: 00000000 00000000 01010122 00000000 00000002 00000000 ffffffff 00000000
  raw: 00000000
  page dumped because: kasan: bad access detected

  Memory state around the buggy address:
   d216f800: 00 00 00 00 00 f1 f1 f1 f1 00 00 00 00 00 00 00
   d216f880: f2 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  >d216f900: 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00
                                            ^
   d216f980: f2 f2 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 00 00
   d216fa00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

After looking into this issue, I find the buggy address belongs
to the task stack region. It seems KASAN has something wrong.
I look into the code of __get_wchan in x86 architecture and
find the same issue has been resolved by the commit
f7d27c35ddff ("x86/mm, kasan: Silence KASAN warnings in get_wchan()").
The solution could be applied to powerpc architecture too.

As Andrey Ryabinin said, get_wchan() is racy by design, it may
access volatile stack of running task, thus it may access
redzone in a stack frame and cause KASAN to warn about this.

Use READ_ONCE_NOCHECK() to silence these warnings.

Reported-by: Wanming Hu <huwanming@huaweil.com>
Signed-off-by: He Ying <heying24@huawei.com>
Signed-off-by: Chen Jingwen <chenjingwen6@huawei.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220121014418.155675-1-heying24@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: imx8mn-beacon: Enable RTS-CTS on UART3

commit 5446ff1a67160ad92d9aae9530846aa54750be36 upstream.

There is a header for a DB9 serial port, but any attempts to use
hardware handshaking fail.  Enable RTS and CTS pin muxing and enable
handshaking in the uart node.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: imx8mm-beacon: Enable RTS-CTS on UART3

commit 4ce01ce36d77137cf60776b320babed89de6bd4c upstream.

There is a header for a DB9 serial port, but any attempts to use
hardware handshaking fail.  Enable RTS and CTS pin muxing and enable
handshaking in the uart node.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: Replace use of rwsem with errseq_t

commit 555dbf1a9aac6d3150c8b52fa35f768a692f4eeb upstream.

The nfsd_file nf_rwsem is currently being used to separate file write
and commit instances to ensure that we catch errors and apply them to
the correct write/commit.
We can improve scalability at the expense of a little accuracy (some
extra false positives) by replacing the nf_rwsem with more careful
use of the errseq_t mechanism to track errors across the different
operations.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
[ cel: rebased on zero-verifier fix ]
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "drm/amd/display: Fix DCN3 B0 DP Alt Mapping"

commit 1039188806d4cfdf9c412bb4ddb51b4d8cd15478 upstream.

This reverts commit 4b7786d87fb3adf3e534c4f1e4f824d8700b786b.

Commit 4b7786d87fb3 ("drm/amd/display: Fix DCN3 B0 DP Alt Mapping")
is causing 2nd USB-C display not lighting up.
Phy id remapping is done differently than is assumed in this
patch.

Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.15.48

Link: https://lore.kernel.org/r/20220614183720.512073672@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Allen Pais <apais@linux.microsoft.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation/mmio: Print SMT warning

commit 1dc6ff02c8bf77d71b9b5d11cbc9df77cfb28626 upstream

Similar to MDS and TAA, print a warning if SMT is enabled for the MMIO
Stale Data vulnerability.

Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86/speculation: Disable Fill buffer clear within guests

commit 027bbb884be006b05d9c577d6401686053aa789e upstream

The enumeration of MD_CLEAR in CPUID(EAX=7,ECX=0).EDX{bit 10} is not an
accurate indicator on all CPUs of whether the VERW instruction will
overwrite fill buffers. FB_CLEAR enumeration in
IA32_ARCH_CAPABILITIES{bit 17} covers the case of CPUs that are not
vulnerable to MDS/TAA, indicating that microcode does overwrite fill
buffers.

Guests running in VMM environments may not be aware of all the
capabilities/vulnerabilities of the host CPU. Specifically, a guest may
apply MDS/TAA mitigations when a virtual CPU is enumerated as vulnerable
to MDS/TAA even when the physical CPU is not. On CPUs that enumerate
FB_CLEAR_CTRL the VMM may set FB_CLEAR_DIS to skip overwriting of fill
buffers by the VERW instruction. This is done by setting FB_CLEAR_DIS
during VMENTER and resetting on VMEXIT. For guests that enumerate
FB_CLEAR (explicitly asking for fill buffer clear capability) the VMM
will not use FB_CLEAR_DIS.

Irrespective of guest state, host overwrites CPU buffers before VMENTER
to protect itself from an MMIO capable guest, as part of mitigation for
MMIO Stale Data vulnerabilities.

Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation/mmio: Reuse SRBDS mitigation for SBDS

commit a992b8a4682f119ae035a01b40d4d0665c4a2875 upstream

The Shared Buffers Data Sampling (SBDS) variant of Processor MMIO Stale
Data vulnerabilities may expose RDRAND, RDSEED and SGX EGETKEY data.
Mitigation for this is added by a microcode update.

As some of the implications of SBDS are similar to SRBDS, SRBDS mitigation
infrastructure can be leveraged by SBDS. Set X86_BUG_SRBDS and use SRBDS
mitigation.

Mitigation is enabled by default; use srbds=off to opt-out. Mitigation
status can be checked from below file:

  /sys/devices/system/cpu/vulnerabilities/srbds

Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation/srbds: Update SRBDS mitigation selection

commit 22cac9c677c95f3ac5c9244f8ca0afdc7c8afb19 upstream

Currently, Linux disables SRBDS mitigation on CPUs not affected by
MDS and have the TSX feature disabled. On such CPUs, secrets cannot
be extracted from CPU fill buffers using MDS or TAA. Without SRBDS
mitigation, Processor MMIO Stale Data vulnerabilities can be used to
extract RDRAND, RDSEED, and EGETKEY data.

Do not disable SRBDS mitigation by default when CPU is also affected by
Processor MMIO Stale Data vulnerabilities.

Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation/mmio: Add sysfs reporting for Processor MMIO Stale Data

commit 8d50cdf8b8341770bc6367bce40c0c1bb0e1d5b3 upstream

Add the sysfs reporting file for Processor MMIO Stale Data
vulnerability. It exposes the vulnerability and mitigation state similar
to the existing files for the other hardware vulnerabilities.

Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation/mmio: Enable CPU Fill buffer clearing on idle

commit 99a83db5a605137424e1efe29dc0573d6a5b6316 upstream

When the CPU is affected by Processor MMIO Stale Data vulnerabilities,
Fill Buffer Stale Data Propagator (FBSDP) can propagate stale data out
of Fill buffer to uncore buffer when CPU goes idle. Stale data can then
be exploited with other variants using MMIO operations.

Mitigate it by clearing the Fill buffer before entering idle state.

Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/bugs: Group MDS, TAA & Processor MMIO Stale Data mitigations

commit e5925fb867290ee924fcf2fe3ca887b792714366 upstream

MDS, TAA and Processor MMIO Stale Data mitigations rely on clearing CPU
buffers. Moreover, status of these mitigations affects each other.
During boot, it is important to maintain the order in which these
mitigations are selected. This is especially true for
md_clear_update_mitigation() that needs to be called after MDS, TAA and
Processor MMIO Stale Data mitigation selection is done.

Introduce md_clear_select_mitigation(), and select all these mitigations
from there. This reflects relationships between these mitigations and
ensures proper ordering.

Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation/mmio: Add mitigation for Processor MMIO Stale Data

commit 8cb861e9e3c9a55099ad3d08e1a3b653d29c33ca upstream

Processor MMIO Stale Data is a class of vulnerabilities that may
expose data after an MMIO operation. For details please refer to
Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst.

These vulnerabilities are broadly categorized as:

Device Register Partial Write (DRPW):
  Some endpoint MMIO registers incorrectly handle writes that are
  smaller than the register size. Instead of aborting the write or only
  copying the correct subset of bytes (for example, 2 bytes for a 2-byte
  write), more bytes than specified by the write transaction may be
  written to the register. On some processors, this may expose stale
  data from the fill buffers of the core that created the write
  transaction.

Shared Buffers Data Sampling (SBDS):
  After propagators may have moved data around the uncore and copied
  stale data into client core fill buffers, processors affected by MFBDS
  can leak data from the fill buffer.

Shared Buffers Data Read (SBDR):
  It is similar to Shared Buffer Data Sampling (SBDS) except that the
  data is directly read into the architectural software-visible state.

An attacker can use these vulnerabilities to extract data from CPU fill
buffers using MDS and TAA methods. Mitigate it by clearing the CPU fill
buffers using the VERW instruction before returning to a user or a
guest.

On CPUs not affected by MDS and TAA, user application cannot sample data
from CPU fill buffers using MDS or TAA. A guest with MMIO access can
still use DRPW or SBDR to extract data architecturally. Mitigate it with
VERW instruction to clear fill buffers before VMENTER for MMIO capable
guests.

Add a kernel parameter mmio_stale_data={off|full|full,nosmt} to control
the mitigation.

Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation: Add a common function for MD_CLEAR mitigation update

commit f52ea6c26953fed339aa4eae717ee5c2133c7ff2 upstream

Processor MMIO Stale Data mitigation uses similar mitigation as MDS and
TAA. In preparation for adding its mitigation, add a common function to
update all mitigations that depend on MD_CLEAR.

  [ bp: Add a newline in md_clear_update_mitigation() to separate
    statements better. ]

Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation/mmio: Enumerate Processor MMIO Stale Data bug

commit 51802186158c74a0304f51ab963e7c2b3a2b046f upstream

Processor MMIO Stale Data is a class of vulnerabilities that may
expose data after an MMIO operation. For more details please refer to
Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst

Add the Processor MMIO Stale Data bug enumeration. A microcode update
adds new bits to the MSR IA32_ARCH_CAPABILITIES, define them.

Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation: Add documentation for Processor MMIO Stale Data

commit 4419470191386456e0b8ed4eb06a70b0021798a6 upstream

Add the admin guide for Processor MMIO stale data vulnerabilities.

Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.15.47

Link: https://lore.kernel.org/r/20220613094922.843438024@linuxfoundation.org
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20220613181847.216528857@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xsk: Fix possible crash when multiple sockets are created

commit ba3beec2ec1d3b4fd8672ca6e781dac4b3267f6e upstream.

Fix a crash that happens if an Rx only socket is created first, then a
second socket is created that is Tx only and bound to the same umem as
the first socket and also the same netdev and queue_id together with the
XDP_SHARED_UMEM flag. In this specific case, the tx_descs array page
pool was not created by the first socket as it was an Rx only socket.
When the second socket is bound it needs this tx_descs array of this
shared page pool as it has a Tx component, but unfortunately it was
never allocated, leading to a crash. Note that this array is only used
for zero-copy drivers using the batched Tx APIs, currently only ice and
i40e.

[ 5511.150360] BUG: kernel NULL pointer dereference, address: 0000000000000008
[ 5511.158419] #PF: supervisor write access in kernel mode
[ 5511.164472] #PF: error_code(0x0002) - not-present page
[ 5511.170416] PGD 0 P4D 0
[ 5511.173347] Oops: 0002 [#1] PREEMPT SMP PTI
[ 5511.178186] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G            E     5.18.0-rc1+ #97
[ 5511.187245] Hardware name: Intel Corp. GRANTLEY/GRANTLEY, BIOS GRRFCRB1.86B.0276.D07.1605190235 05/19/2016
[ 5511.198418] RIP: 0010:xsk_tx_peek_release_desc_batch+0x198/0x310
[ 5511.205375] Code: c0 83 c6 01 84 c2 74 6d 8d 46 ff 23 07 44 89 e1 48 83 c0 14 48 c1 e1 04 48 c1 e0 04 48 03 47 10 4c 01 c1 48 8b 50 08 48 8b 00 <48> 89 51 08 48 89 01 41 80 bd d7 00 00 00 00 75 82 48 8b 19 49 8b
[ 5511.227091] RSP: 0018:ffffc90000003dd0 EFLAGS: 00010246
[ 5511.233135] RAX: 0000000000000000 RBX: ffff88810c8da600 RCX: 0000000000000000
[ 5511.241384] RDX: 000000000000003c RSI: 0000000000000001 RDI: ffff888115f555c0
[ 5511.249634] RBP: ffffc90000003e08 R08: 0000000000000000 R09: ffff889092296b48
[ 5511.257886] R10: 0000ffffffffffff R11: ffff889092296800 R12: 0000000000000000
[ 5511.266138] R13: ffff88810c8db500 R14: 0000000000000040 R15: 0000000000000100
[ 5511.274387] FS:  0000000000000000(0000) GS:ffff88903f800000(0000) knlGS:0000000000000000
[ 5511.283746] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 5511.290389] CR2: 0000000000000008 CR3: 00000001046e2001 CR4: 00000000003706f0
[ 5511.298640] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 5511.306892] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 5511.315142] Call Trace:
[ 5511.317972]  <IRQ>
[ 5511.320301]  ice_xmit_zc+0x68/0x2f0 [ice]
[ 5511.324977]  ? ktime_get+0x38/0xa0
[ 5511.328913]  ice_napi_poll+0x7a/0x6a0 [ice]
[ 5511.333784]  __napi_poll+0x2c/0x160
[ 5511.337821]  net_rx_action+0xdd/0x200
[ 5511.342058]  __do_softirq+0xe6/0x2dd
[ 5511.346198]  irq_exit_rcu+0xb5/0x100
[ 5511.350339]  common_interrupt+0xa4/0xc0
[ 5511.354777]  </IRQ>
[ 5511.357201]  <TASK>
[ 5511.359625]  asm_common_interrupt+0x1e/0x40
[ 5511.364466] RIP: 0010:cpuidle_enter_state+0xd2/0x360
[ 5511.370211] Code: 49 89 c5 0f 1f 44 00 00 31 ff e8 e9 00 7b ff 45 84 ff 74 12 9c 58 f6 c4 02 0f 85 72 02 00 00 31 ff e8 02 0c 80 ff fb 45 85 f6 <0f> 88 11 01 00 00 49 63 c6 4c 2b 2c 24 48 8d 14 40 48 8d 14 90 49
[ 5511.391921] RSP: 0018:ffffffff82a03e60 EFLAGS: 00000202
[ 5511.397962] RAX: ffff88903f800000 RBX: 0000000000000001 RCX: 000000000000001f
[ 5511.406214] RDX: 0000000000000000 RSI: ffffffff823400b9 RDI: ffffffff8234c046
[ 5511.424646] RBP: ffff88810a384800 R08: 000005032a28c046 R09: 0000000000000008
[ 5511.443233] R10: 000000000000000b R11: 0000000000000006 R12: ffffffff82bcf700
[ 5511.461922] R13: 000005032a28c046 R14: 0000000000000001 R15: 0000000000000000
[ 5511.480300]  cpuidle_enter+0x29/0x40
[ 5511.494329]  do_idle+0x1c7/0x250
[ 5511.507610]  cpu_startup_entry+0x19/0x20
[ 5511.521394]  start_kernel+0x649/0x66e
[ 5511.534626]  secondary_startup_64_no_verify+0xc3/0xcb
[ 5511.549230]  </TASK>

Detect such case during bind() and allocate this memory region via newly
introduced xp_alloc_tx_descs(). Also, use kvcalloc instead of kcalloc as
for other buffer pool allocations, so that it matches the kvfree() from
xp_destroy().

Fixes: d1bc532e99be ("i40e: xsk: Move tmp desc array from driver to pool")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220425153745.481322-1-maciej.fijalkowski@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: fix tcp_mtup_probe_success vs wrong snd_cwnd

commit 11825765291a93d8e7f44230da67b9f607c777bf upstream.

syzbot got a new report [1] finally pointing to a very old bug,
added in initial support for MTU probing.

tcp_mtu_probe() has checks about starting an MTU probe if
tcp_snd_cwnd(tp) >= 11.

But nothing prevents tcp_snd_cwnd(tp) to be reduced later
and before the MTU probe succeeds.

This bug would lead to potential zero-divides.

Debugging added in commit 40570375356c ("tcp: add accessors
to read/set tp->snd_cwnd") has paid off :)

While we are at it, address potential overflows in this code.

[1]
WARNING: CPU: 1 PID: 14132 at include/net/tcp.h:1219 tcp_mtup_probe_success+0x366/0x570 net/ipv4/tcp_input.c:2712
Modules linked in:
CPU: 1 PID: 14132 Comm: syz-executor.2 Not tainted 5.18.0-syzkaller-07857-gbabf0bb978e3 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:tcp_snd_cwnd_set include/net/tcp.h:1219 [inline]
RIP: 0010:tcp_mtup_probe_success+0x366/0x570 net/ipv4/tcp_input.c:2712
Code: 74 08 48 89 ef e8 da 80 17 f9 48 8b 45 00 65 48 ff 80 80 03 00 00 48 83 c4 30 5b 41 5c 41 5d 41 5e 41 5f 5d c3 e8 aa b0 c5 f8 <0f> 0b e9 16 fe ff ff 48 8b 4c 24 08 80 e1 07 38 c1 0f 8c c7 fc ff
RSP: 0018:ffffc900079e70f8 EFLAGS: 00010287
RAX: ffffffff88c0f7f6 RBX: ffff8880756e7a80 RCX: 0000000000040000
RDX: ffffc9000c6c4000 RSI: 0000000000031f9e RDI: 0000000000031f9f
RBP: 0000000000000000 R08: ffffffff88c0f606 R09: ffffc900079e7520
R10: ffffed101011226d R11: 1ffff1101011226c R12: 1ffff1100eadcf50
R13: ffff8880756e72c0 R14: 1ffff1100eadcf89 R15: dffffc0000000000
FS:  00007f643236e700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1ab3f1e2a0 CR3: 0000000064fe7000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 tcp_clean_rtx_queue+0x223a/0x2da0 net/ipv4/tcp_input.c:3356
 tcp_ack+0x1962/0x3c90 net/ipv4/tcp_input.c:3861
 tcp_rcv_established+0x7c8/0x1ac0 net/ipv4/tcp_input.c:5973
 tcp_v6_do_rcv+0x57b/0x1210 net/ipv6/tcp_ipv6.c:1476
 sk_backlog_rcv include/net/sock.h:1061 [inline]
 __release_sock+0x1d8/0x4c0 net/core/sock.c:2849
 release_sock+0x5d/0x1c0 net/core/sock.c:3404
 sk_stream_wait_memory+0x700/0xdc0 net/core/stream.c:145
 tcp_sendmsg_locked+0x111d/0x3fc0 net/ipv4/tcp.c:1410
 tcp_sendmsg+0x2c/0x40 net/ipv4/tcp.c:1448
 sock_sendmsg_nosec net/socket.c:714 [inline]
 sock_sendmsg net/socket.c:734 [inline]
 __sys_sendto+0x439/0x5c0 net/socket.c:2119
 __do_sys_sendto net/socket.c:2131 [inline]
 __se_sys_sendto net/socket.c:2127 [inline]
 __x64_sys_sendto+0xda/0xf0 net/socket.c:2127
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f6431289109
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f643236e168 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007f643139c100 RCX: 00007f6431289109
RDX: 00000000d0d0c2ac RSI: 0000000020000080 RDI: 000000000000000a
RBP: 00007f64312e308d R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fff372533af R14: 00007f643236e300 R15: 0000000000022000

Fixes: 5d424d5a674f ("[TCP]: MTU probing")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: idxd: add missing callback function to support DMA_INTERRUPT

commit 2112b8f4fb5cc35d1c384324763765953186b81f upstream.

When setting DMA_INTERRUPT capability, a callback function
dma->device_prep_dma_interrupt() is needed to support this capability.
Without setting the callback, dma_async_device_register() will fail dma
capability check.

Fixes: 4e5a4eb20393 ("dmaengine: idxd: set DMA_INTERRUPT cap bit")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/165101232637.3951447.15765792791591763119.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iov_iter: fix build issue due to possible type mis-match

commit 1c27f1fc1549f0e470429f5497a76ad28a37f21a upstream.

Commit 6c77676645ad ("iov_iter: Fix iter_xarray_get_pages{,_alloc}()")
introduced a problem on some 32-bit architectures (at least arm, xtensa,
csky,sparc and mips), that have a 'size_t' that is 'unsigned int'.

The reason is that we now do

    min(nr * PAGE_SIZE - offset, maxsize);

where 'nr' and 'offset' and both 'unsigned int', and PAGE_SIZE is
'unsigned long'.  As a result, the normal C type rules means that the
first argument to 'min()' ends up being 'unsigned long'.

In contrast, 'maxsize' is of type 'size_t'.

Now, 'size_t' and 'unsigned long' are always the same physical type in
the kernel, so you'd think this doesn't matter, and from an actual
arithmetic standpoint it doesn't.

But on 32-bit architectures 'size_t' is commonly 'unsigned int', even if
it could also be 'unsigned long'.  In that situation, both are unsigned
32-bit types, but they are not the *same* type.

And as a result 'min()' will complain about the distinct types (ignore
the "pointer types" part of the error message: that's an artifact of the
way we have made 'min()' check types for being the same):

  lib/iov_iter.c: In function 'iter_xarray_get_pages':
  include/linux/minmax.h:20:35: error: comparison of distinct pointer types lacks a cast [-Werror]
     20 |         (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
        |                                   ^~
  lib/iov_iter.c:1464:16: note: in expansion of macro 'min'
   1464 |         return min(nr * PAGE_SIZE - offset, maxsize);
        |                ^~~

This was not visible on 64-bit architectures (where we always define
'size_t' to be 'unsigned long').

Force these cases to use 'min_t(size_t, x, y)' to make the type explicit
and avoid the issue.

[ Nit-picky note: technically 'size_t' doesn't have to match 'unsigned
  long' arithmetically. We've certainly historically seen environments
  with 16-bit address spaces and 32-bit 'unsigned long'.

  Similarly, even in 64-bit modern environments, 'size_t' could be its
  own type distinct from 'unsigned long', even if it were arithmetically
  identical.

  So the above type commentary is only really descriptive of the kernel
  environment, not some kind of universal truth for the kinds of wild
  and crazy situations that are allowed by the C standard ]

Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/all/YqRyL2sIqQNDfky2@debian/
Cc: Jeff Layton <jlayton@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

zonefs: fix handling of explicit_open option on mount

commit a2a513be7139b279f1b5b2cee59c6c4950c34346 upstream.

Ignoring the explicit_open mount option on mount for devices that do not
have a limit on the number of open zones must be done after the mount
options are parsed and set in s_mount_opts. Move the check to ignore
the explicit_open option after the call to zonefs_parse_options() in
zonefs_fill_super().

Fixes: b5c00e975779 ("zonefs: open/close zone on file open/close")
Cc: <stable@vger.kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: qcom: Fix pipe clock imbalance

commit fdf6a2f533115ec5d4d9629178f8196331f1ac50 upstream.

Fix a clock imbalance introduced by ed8cc3b1fc84 ("PCI: qcom: Add support
for SDM845 PCIe controller"), which enables the pipe clock both in init()
and in post_init() but only disables in post_deinit().

Note that the pipe clock was also never disabled in the init() error
paths and that enabling the clock before powering up the PHY looks
questionable.

Link: https://lore.kernel.org/r/20220401133351.10113-1-johan+linaro@kernel.org
Fixes: ed8cc3b1fc84 ("PCI: qcom: Add support for SDM845 PCIe controller")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: stable@vger.kernel.org # 5.6
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/sched: act_police: more accurate MTU policing

commit 4ddc844eb81da59bfb816d8d52089aba4e59e269 upstream.

in current Linux, MTU policing does not take into account that packets at
the TC ingress have the L2 header pulled. Thus, the same TC police action
(with the same value of tcfp_mtu) behaves differently for ingress/egress.
In addition, the full GSO size is compared to tcfp_mtu: as a consequence,
the policer drops GSO packets even when individual segments have the L2 +
L3 + L4 + payload length below the configured valued of tcfp_mtu.

Improve the accuracy of MTU policing as follows:
 - account for mac_len for non-GSO packets at TC ingress.
 - compare MTU threshold with the segmented size for GSO packets.
Also, add a kselftest that verifies the correct behavior.

Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md/raid0: Ignore RAID0 layout if the second zone has only one device

commit ea23994edc4169bd90d7a9b5908c6ccefd82fa40 upstream.

The RAID0 layout is irrelevant if all members have the same size so the
array has only one zone. It is *also* irrelevant if the array has two
zones and the second zone has only one device, for example if the array
has two members of different sizes.

So in that case it makes sense to allow assembly even when the layout is
undefined, like what is done when the array has only one zone.

Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Pascal Hambourg <pascal@plouf.fr.eu.org>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

random: account for arch randomness in bits

commit 77fc95f8c0dc9e1f8e620ec14d2fb65028fb7adc upstream.

Rather than accounting in bytes and multiplying (shifting), we can just
account in bits and avoid the shift. The main motivation for this is
there are other patches in flux that expand this code a bit, and
avoiding the duplication of "* 8" everywhere makes things a bit clearer.

Cc: stable@vger.kernel.org
Fixes: 12e45a2a6308 ("random: credit architectural init the exact amount")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

random: mark bootloader randomness code as __init

commit 39e0f991a62ed5efabd20711a7b6e7da92603170 upstream.

add_bootloader_randomness() and the variables it touches are only used
during __init and not after, so mark these as __init. At the same time,
unexport this, since it's only called by other __init code that's
built-in.

Cc: stable@vger.kernel.org
Fixes: 428826f5358c ("fdt: add support for rng-seed")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

random: avoid checking crng_ready() twice in random_init()

commit 9b29b6b20376ab64e1b043df6301d8a92378e631 upstream.

The current flow expands to:

    if (crng_ready())
       ...
    else if (...)
        if (!crng_ready())
            ...

The second crng_ready() call is redundant, but can't so easily be
optimized out by the compiler.

This commit simplifies that to:

    if (crng_ready()
        ...
    else if (...)
        ...

Fixes: 560181c27b58 ("random: move initialization functions out of hot pages")
Cc: stable@vger.kernel.org
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/ast: Create threshold values for AST2600

commit bcc77411e8a65929655cef7b63a36000724cdc4b upstream.

The threshold value is used for AST2600 only.

Signed-off-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220117083643.41493-1-kuohsiang_chou@aspeedtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/mm: Switch obsolete dssall to .long

commit d51f86cfd8e378d4907958db77da3074f6dce3ba upstream.

The dssall ("Data Stream Stop All") instruction is obsolete altogether
with other Data Cache Instructions since ISA 2.03 (year 2006).

LLVM IAS does not support it but PPC970 seems to be using it.
This switches dssall to .long as there is no much point in fixing LLVM.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211221055904.555763-6-aik@ozlabs.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/32: Fix overread/overwrite of thread_struct via ptrace

commit 8e1278444446fc97778a5e5c99bca1ce0bbc5ec9 upstream.

The ptrace PEEKUSR/POKEUSR (aka PEEKUSER/POKEUSER) API allows a process
to read/write registers of another process.

To get/set a register, the API takes an index into an imaginary address
space called the "USER area", where the registers of the process are
laid out in some fashion.

The kernel then maps that index to a particular register in its own data
structures and gets/sets the value.

The API only allows a single machine-word to be read/written at a time.
So 4 bytes on 32-bit kernels and 8 bytes on 64-bit kernels.

The way floating point registers (FPRs) are addressed is somewhat
complicated, because double precision float values are 64-bit even on
32-bit CPUs. That means on 32-bit kernels each FPR occupies two
word-sized locations in the USER area. On 64-bit kernels each FPR
occupies one word-sized location in the USER area.

Internally the kernel stores the FPRs in an array of u64s, or if VSX is
enabled, an array of pairs of u64s where one half of each pair stores
the FPR. Which half of the pair stores the FPR depends on the kernel's
endianness.

To handle the different layouts of the FPRs depending on VSX/no-VSX and
big/little endian, the TS_FPR() macro was introduced.

Unfortunately the TS_FPR() macro does not take into account the fact
that the addressing of each FPR differs between 32-bit and 64-bit
kernels. It just takes the index into the "USER area" passed from
userspace and indexes into the fp_state.fpr array.

On 32-bit there are 64 indexes that address FPRs, but only 32 entries in
the fp_state.fpr array, meaning the user can read/write 256 bytes past
the end of the array. Because the fp_state sits in the middle of the
thread_struct there are various fields than can be overwritten,
including some pointers. As such it may be exploitable.

It has also been observed to cause systems to hang or otherwise
misbehave when using gdbserver, and is probably the root cause of this
report which could not be easily reproduced:
  https://lore.kernel.org/linuxppc-dev/dc38afe9-6b78-f3f5-666b-986939e40fc6@keymile.com/

Rather than trying to make the TS_FPR() macro even more complicated to
fix the bug, or add more macros, instead add a special-case for 32-bit
kernels. This is more obvious and hopefully avoids a similar bug
happening again in future.

Note that because 32-bit kernels never have VSX enabled the code doesn't
need to consider TS_FPRWIDTH/OFFSET at all. Add a BUILD_BUG_ON() to
ensure that 32-bit && VSX is never enabled.

Fixes: 87fec0514f61 ("powerpc: PTRACE_PEEKUSR/PTRACE_POKEUSER of FPR registers in little endian builds")
Cc: stable@vger.kernel.org # v3.13+
Reported-by: Ariel Miculas <ariel.miculas@belden.com>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220609133245.573565-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: update VCN codec support for Yellow Carp

commit 97e50305542f384741a5b45699aba349fe9fca73 upstream.

Supports AV1.  Mesa already has support for this and
doesn't rely on the kernel caps for yellow carp, so
this was already working from an application perspective.

Fixes: 554398174d98 ("amdgpu/nv.c - Added video codec support for Yellow Carp")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2002
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/atomic: Force bridge self-refresh-exit on CRTC switch

commit e54a4424925a27ed94dff046db3ce5caf4b1e748 upstream.

It's possible to change which CRTC is in use for a given
connector/encoder/bridge while we're in self-refresh without fully
disabling the connector/encoder/bridge along the way. This can confuse
the bridge encoder/bridge, because
(a) it needs to track the SR state (trying to perform "active"
    operations while the panel is still in SR can be Bad(TM)); and
(b) it tracks the SR state via the CRTC state (and after the switch, the
    previous SR state is lost).

Thus, we need to either somehow carry the self-refresh state over to the
new CRTC, or else force an encoder/bridge self-refresh transition during
such a switch.

I choose the latter, so we disable the encoder (and exit PSR) before
attaching it to the new CRTC (where we can continue to assume a clean
(non-self-refresh) state).

This fixes PSR issues seen on Rockchip RK3399 systems with
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c.

Change in v2:

- Drop "->enable" condition; this could possibly be "->active" to
  reflect the intended hardware state, but it also is a little
  over-specific. We want to make a transition through "disabled" any
  time we're exiting PSR at the same time as a CRTC switch.
  (Thanks Liu Ying)

Cc: Liu Ying <victor.liu@oss.nxp.com>
Cc: <stable@vger.kernel.org>
Fixes: 1452c25b0e60 ("drm: Add helpers to kick off self refresh mode in drivers")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220228122522.v2.2.Ic15a2ef69c540aee8732703103e2cff51fb9c399@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/bridge: analogix_dp: Support PSR-exit to disable transition

commit ca871659ec1606d33b1e76de8d4cf924cf627e34 upstream.

Most eDP panel functions only work correctly when the panel is not in
self-refresh. In particular, analogix_dp_bridge_disable() tends to hit
AUX channel errors if the panel is in self-refresh.

Given the above, it appears that so far, this driver assumes that we are
never in self-refresh when it comes time to fully disable the bridge.
Prior to commit 846c7dfc1193 ("drm/atomic: Try to preserve the crtc
enabled state in drm_atomic_remove_fb, v2."), this tended to be true,
because we would automatically disable the pipe when framebuffers were
removed, and so we'd typically disable the bridge shortly after the last
display activity.

However, that is not guaranteed: an idle (self-refresh) display pipe may
be disabled, e.g., when switching CRTCs. We need to exit PSR first.

Stable notes: this is definitely a bugfix, and the bug has likely
existed in some form for quite a while. It may predate the "PSR helpers"
refactor, but the code looked very different before that, and it's
probably not worth rewriting the fix.

Cc: <stable@vger.kernel.org>
Fixes: 6c836d965bad ("drm/rockchip: Use the helpers for PSR")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220228122522.v2.1.I161904be17ba14526f78536ccd78b85818449b51@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: Don't select HAVE_IRQ_EXIT_ON_IRQ_STACK

commit 1346d00e1bdfd4067f92bc14e8a6131a01de4190 upstream.

The HAVE_IRQ_EXIT_ON_IRQ_STACK option tells generic code that irq_exit()
is called while still running on the hard irq stack (hardirq_ctx[] in
the powerpc code).

Selecting the option means the generic code will *not* switch to the
softirq stack before running softirqs, because the code is already
running on the (mostly empty) hard irq stack.

But since commit 1b1b6a6f4cc0 ("powerpc: handle irq_enter/irq_exit in
interrupt handler wrappers"), irq_exit() is now called on the regular task
stack, not the hard irq stack.

That's because previously irq_exit() was called in __do_irq() which is
run on the hard irq stack, but now it is called in
interrupt_async_exit_prepare() which is called from do_irq() constructed
by the wrapper macro, which is after the switch back to the task stack.

So drop HAVE_IRQ_EXIT_ON_IRQ_STACK from the Kconfig. This will mean an
extra stack switch when processing some interrupts, but should
significantly reduce the likelihood of stack overflow.

It also means the softirq stack will be used for running softirqs from
other interrupts that don't use the hard irq stack, eg. timer interrupts.

Fixes: 1b1b6a6f4cc0 ("powerpc: handle irq_enter/irq_exit in interrupt handler wrappers")
Cc: stable@vger.kernel.org # v5.12+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220525032639.1947280-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vduse: Fix NULL pointer dereference on sysfs access

commit b27ee76c74dc831d6e092eaebc2dfc9c0beed1c9 upstream.

The control device has no drvdata. So we will get a
NULL pointer dereference when accessing control
device's msg_timeout attribute via sysfs:

[ 132.841881][ T3644] BUG: kernel NULL pointer dereference, address: 00000000000000f8
[ 132.850619][ T3644] RIP: 0010:msg_timeout_show (drivers/vdpa/vdpa_user/vduse_dev.c:1271)
[ 132.869447][ T3644] dev_attr_show (drivers/base/core.c:2094)
[ 132.870215][ T3644] sysfs_kf_seq_show (fs/sysfs/file.c:59)
[ 132.871164][ T3644] ? device_remove_bin_file (drivers/base/core.c:2088)
[ 132.872082][ T3644] kernfs_seq_show (fs/kernfs/file.c:164)
[ 132.872838][ T3644] seq_read_iter (fs/seq_file.c:230)
[ 132.873578][ T3644] ? __vmalloc_area_node (mm/vmalloc.c:3041)
[ 132.874532][ T3644] kernfs_fop_read_iter (fs/kernfs/file.c:238)
[ 132.875513][ T3644] __kernel_read (fs/read_write.c:440 (discriminator 1))
[ 132.876319][ T3644] kernel_read (fs/read_write.c:459)
[ 132.877129][ T3644] kernel_read_file (fs/kernel_read_file.c:94)
[ 132.877978][ T3644] kernel_read_file_from_fd (include/linux/file.h:45 fs/kernel_read_file.c:186)
[ 132.879019][ T3644] __do_sys_finit_module (kernel/module.c:4207)
[ 132.879930][ T3644] __ia32_sys_finit_module (kernel/module.c:4189)
[ 132.880930][ T3644] do_int80_syscall_32 (arch/x86/entry/common.c:112 arch/x86/entry/common.c:132)
[ 132.881847][ T3644] entry_INT80_compat (arch/x86/entry/entry_64_compat.S:419)

To fix it, don't create the unneeded attribute for
control device anymore.

Fixes: c8a6153b6c59 ("vduse: Introduce VDUSE - vDPA Device in Userspace")
Reported-by: kernel test robot <oliver.sang@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Message-Id: <20220426073656.229-1-xieyongji@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: bcm5974 - set missing URB_NO_TRANSFER_DMA_MAP urb flag

commit c42e65664390be7c1ef3838cd84956d3a2739d60 upstream.

The bcm5974 driver does the allocation and dma mapping of the usb urb
data buffer, but driver does not set the URB_NO_TRANSFER_DMA_MAP flag
to let usb core know the buffer is already mapped.

usb core tries to map the already mapped buffer, causing a warning:
"xhci_hcd 0000:00:14.0: rejecting DMA map of vmalloc memory"

Fix this by setting the URB_NO_TRANSFER_DMA_MAP, letting usb core
know buffer is already mapped by bcm5974 driver

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215890
Link: https://lore.kernel.org/r/20220606113636.588955-1-mathias.nyman@linux.intel.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ixgbe: fix unexpected VLAN Rx in promisc mode on VF

commit 7bb0fb7c63df95d6027dc50d6af3bc3bbbc25483 upstream.

When the promiscuous mode is enabled on a VF, the IXGBE_VMOLR_VPE
bit (VLAN Promiscuous Enable) is set. This means that the VF will
receive packets whose VLAN is not the same than the VLAN of the VF.

For instance, in this situation:

┌────────┐    ┌────────┐    ┌────────┐
│        │    │        │    │        │
│        │    │        │    │        │
│     VF0├────┤VF1  VF2├────┤VF3     │
│        │    │        │    │        │
└────────┘    └────────┘    └────────┘
   VM1           VM2           VM3

vf 0:  vlan 1000
vf 1:  vlan 1000
vf 2:  vlan 1001
vf 3:  vlan 1001

If we tcpdump on VF3, we see all the packets, even those transmitted
on vlan 1000.

This behavior prevents to bridge VF1 and VF2 in VM2, because it will
create a loop: packets transmitted on VF1 will be received by VF2 and
vice-versa, and bridged again through the software bridge.

This patch remove the activation of VLAN Promiscuous when a VF enables
the promiscuous mode. However, the IXGBE_VMOLR_UPE bit (Unicast
Promiscuous) is kept, so that a VF receives all packets that has the
same VLAN, whatever the destination MAC address.

Fixes: 8443c1a4b192 ("ixgbe, ixgbevf: Add new mbox API xcast mode")
Cc: stable@vger.kernel.org
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ixgbe: fix bcast packets Rx on VF after promisc removal

commit 803e9895ea2b0fe80bc85980ae2d7a7e44037914 upstream.

After a VF requested to remove the promiscuous flag on an interface, the
broadcast packets are not received anymore. This breaks some protocols
like ARP.

In ixgbe_update_vf_xcast_mode(), we should keep the IXGBE_VMOLR_BAM
bit (Broadcast Accept) on promiscuous removal.

This flag is already set by default in ixgbe_set_vmolr() on VF reset.

Fixes: 8443c1a4b192 ("ixgbe, ixgbevf: Add new mbox API xcast mode")
Cc: stable@vger.kernel.org
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfc: st21nfca: fix incorrect sizing calculations in EVT_TRANSACTION

commit f2e19b36593caed4c977c2f55aeba7408aeb2132 upstream.

The transaction buffer is allocated by using the size of the packet buf,
and subtracting two which seem intended to remove the two tags which are
not present in the target structure. This calculation leads to under
counting memory because of differences between the packet contents and the
target structure. The aid_len field is a u8 in the packet, but a u32 in
the structure, resulting in at least 3 bytes always being under counted.
Further, the aid data is a variable length field in the packet, but fixed
in the structure, so if this field is less than the max, the difference is
added to the under counting.

The last validation check for transaction->params_len is also incorrect
since it employs the same accounting error.

To fix, perform validation checks progressively to safely reach the
next field, to determine the size of both buffers and verify both tags.
Once all validation checks pass, allocate the buffer and copy the data.
This eliminates freeing memory on the error path, as those checks are
moved ahead of memory allocation.

Fixes: 26fc6c7f02cb ("NFC: st21nfca: Add HCI transaction event support")
Fixes: 4fbcc1a4cb20 ("nfc: st21nfca: Fix potential buffer overflows in EVT_TRANSACTION")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Faltesek <mfaltesek@google.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfc: st21nfca: fix memory leaks in EVT_TRANSACTION handling

commit 996419e0594abb311fb958553809f24f38e7abbe upstream.

Error paths do not free previously allocated memory. Add devm_kfree() to
those failure paths.

Fixes: 26fc6c7f02cb ("NFC: st21nfca: Add HCI transaction event support")
Fixes: 4fbcc1a4cb20 ("nfc: st21nfca: Fix potential buffer overflows in EVT_TRANSACTION")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Faltesek <mfaltesek@google.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfc: st21nfca: fix incorrect validating logic in EVT_TRANSACTION

commit 77e5fe8f176a525523ae091d6fd0fbb8834c156d upstream.

The first validation check for EVT_TRANSACTION has two different checks
tied together with logical AND. One is a check for minimum packet length,
and the other is for a valid aid_tag. If either condition is true (fails),
then an error should be triggered.  The fix is to change && to ||.

Fixes: 26fc6c7f02cb ("NFC: st21nfca: Add HCI transaction event support")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Faltesek <mfaltesek@google.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

writeback: Fix inode->i_io_list not be protected by inode->i_lock error

commit 10e14073107dd0b6d97d9516a02845a8e501c2c9 upstream.

Commit b35250c0816c ("writeback: Protect inode->i_io_list with
inode->i_lock") made inode->i_io_list not only protected by
wb->list_lock but also inode->i_lock, but inode_io_list_move_locked()
was missed. Add lock there and also update comment describing
things protected by inode->i_lock. This also fixes a race where
__mark_inode_dirty() could move inode under flush worker's hands
and thus sync(2) could miss writing some inodes.

Fixes: b35250c0816c ("writeback: Protect inode->i_io_list with inode->i_lock")
Link: https://lore.kernel.org/r/20220524150540.12552-1-sunjunchao2870@gmail.com
CC: stable@vger.kernel.org
Signed-off-by: Jchao Sun <sunjunchao2870@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: openvswitch: fix misuse of the cached connection on tuple changes

commit 2061ecfdf2350994e5b61c43e50e98a7a70e95ee upstream.

If packet headers changed, the cached nfct is no longer relevant
for the packet and attempt to re-use it leads to the incorrect packet
classification.

This issue is causing broken connectivity in OpenStack deployments
with OVS/OVN due to hairpin traffic being unexpectedly dropped.

The setup has datapath flows with several conntrack actions and tuple
changes between them:

  actions:ct(commit,zone=8,mark=0/0x1,nat(src)),
          set(eth(src=00:00:00:00:00:01,dst=00:00:00:00:00:06)),
          set(ipv4(src=172.18.2.10,dst=192.168.100.6,ttl=62)),
          ct(zone=8),recirc(0x4)

After the first ct() action the packet headers are almost fully
re-written.  The next ct() tries to re-use the existing nfct entry
and marks the packet as invalid, so it gets dropped later in the
pipeline.

Clearing the cached conntrack entry whenever packet tuple is changed
to avoid the issue.

The flow key should not be cleared though, because we should still
be able to match on the ct_state if the recirculation happens after
the tuple change but before the next ct() action.

Cc: stable@vger.kernel.org
Fixes: 7f8a436eaa2c ("openvswitch: Add conntrack action")
Reported-by: Frode Nordahl <frode.nordahl@canonical.com>
Link: https://mail.openvswitch.org/pipermail/ovs-discuss/2022-May/051829.html
Link: https://bugs.launchpad.net/ubuntu/+source/ovn/+bug/1967856
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://lore.kernel.org/r/20220606221140.488984-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: dp83867: retrigger SGMII AN when link change

commit c76acfb7e19dcc3a0964e0563770b1d11b8d4540 upstream.

There is a limitation in TI DP83867 PHY device where SGMII AN is only
triggered once after the device is booted up. Even after the PHY TPI is
down and up again, SGMII AN is not triggered and hence no new in-band
message from PHY to MAC side SGMII.

This could cause an issue during power up, when PHY is up prior to MAC.
At this condition, once MAC side SGMII is up, MAC side SGMII wouldn`t
receive new in-band message from TI PHY with correct link status, speed
and duplex info.

As suggested by TI, implemented a SW solution here to retrigger SGMII
Auto-Neg whenever there is a link change.

v2: Add Fixes tag in commit message.

Fixes: 2a10154abcb7 ("net: phy: dp83867: Add TI dp83867 phy")
Cc: <stable@vger.kernel.org> # 5.4.x
Signed-off-by: Sit, Michael Wei Hong <michael.wei.hong.sit@intel.com>
Reviewed-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220526090347.128742-1-tee.min.tan@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: block: Fix CQE recovery reset success

commit a051246b786af7e4a9d9219cc7038a6e8a411531 upstream.

The intention of the use of mmc_blk_reset_success() in
mmc_blk_cqe_recovery() was to prevent repeated resets when retrying and
getting the same error. However, that may not be the case - any amount
of time and I/O may pass before another recovery is needed, in which
case there would be no reason to deny it the opportunity to recover via
a reset if necessary. CQE recovery is expected seldom and failure to
recover (if the clear tasks command fails), even more seldom, so it is
better to allow the reset always, which can be done by calling
mmc_blk_reset_success() always.

Fixes: 1e8e55b67030c6 ("mmc: block: Add CQE support")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20220531171922.76080-1-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ata: libata-transport: fix {dma|pio|xfer}_mode sysfs files

commit 72aad489f992871e908ff6d9055b26c6366fb864 upstream.

The {dma|pio}_mode sysfs files are incorrectly documented as having a
list of the supported DMA/PIO transfer modes, while the corresponding
fields of the *struct* ata_device hold the transfer mode IDs, not masks.

To match these docs, the {dma|pio}_mode (and even xfer_mode!) sysfs
files are handled by the ata_bitfield_name_match() macro which leads to
reading such kind of nonsense from them:

$ cat /sys/class/ata_device/dev3.0/pio_mode
XFER_UDMA_7, XFER_UDMA_6, XFER_UDMA_5, XFER_UDMA_4, XFER_MW_DMA_4,
XFER_PIO_6, XFER_PIO_5, XFER_PIO_4, XFER_PIO_3, XFER_PIO_2, XFER_PIO_1,
XFER_PIO_0

Using the correct ata_bitfield_name_search() macro fixes that:

$ cat /sys/class/ata_device/dev3.0/pio_mode
XFER_PIO_4

While fixing the file documentation, somewhat reword the {dma|pio}_mode
file doc and add a note about being mostly useful for PATA devices to
the xfer_mode file doc...

Fixes: d9027470b886 ("[libata] Add ATA transport class")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KEYS: trusted: tpm2: Fix migratable logic

commit dda5384313a40ecbaafd8a9a80f47483255e4c4d upstream.

When creating (sealing) a new trusted key, migratable
trusted keys have the FIXED_TPM and FIXED_PARENT attributes
set, and non-migratable keys don't. This is backwards, and
also causes creation to fail when creating a migratable key
under a migratable parent. (The TPM thinks you are trying to
seal a non-migratable blob under a migratable parent.)

The following simple patch fixes the logic, and has been
tested for all four combinations of migratable and non-migratable
trusted keys and parent storage keys. With this logic, you will
get a proper failure if you try to create a non-migratable
trusted key under a migratable parent storage key, and all other
combinations work correctly.

Cc: stable@vger.kernel.org # v5.13+
Fixes: e5fb5d2c5a03 ("security: keys: trusted: Make sealed key properly interoperable")
Signed-off-by: David Safford <david.safford@gmail.com>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: fix reconnect on smb3 mount types

commit c36ee7dab7749f7be21f7a72392744490b2a9a2b upstream.

cifs.ko defines two file system types: cifs & smb3, and
__cifs_get_super() was not including smb3 file system type when
looking up superblocks, therefore failing to reconnect tcons in
cifs_tree_connect().

Fix this by calling iterate_supers_type() on both file system types.

Link: https://lore.kernel.org/r/CAFrh3J9soC36+BVuwHB=g9z_KB5Og2+p2_W+BBoBOZveErz14w@mail.gmail.com
Cc: stable@vger.kernel.org
Tested-by: Satadru Pramanik <satadru@gmail.com>
Reported-by: Satadru Pramanik <satadru@gmail.com>
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: return errors during session setup during reconnects

commit 8ea21823aa584b55ba4b861307093b78054b0c1b upstream.

During reconnects, we check the return value from
cifs_negotiate_protocol, and have handlers for both success
and failures. But if that passes, and cifs_setup_session
returns any errors other than -EACCES, we do not handle
that. This fix adds a handler for that, so that we don't
go ahead and try a tree_connect on a failed session.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add quirk for HP Dev One

commit 5f3d696eea916693b2d4ed7e62794653fcdd6ec0 upstream.

Enables the audio mute LEDs and limits the mic boost to avoid picking up
noise.

Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220608140111.23170-1-tcrawford@system76.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Fix for quirk to enable speaker output on the Lenovo Yoga DuetITL 2021

commit 85743a847caeab696dafc4ce1a7e1e2b7e29a0f6 upstream.

Enables the ALC287_FIXUP_YOGA7_14ITL_SPEAKERS quirk for the Lenovo
Yoga DuetITL 2021 laptop to fix speaker output.

[ re-sorted in the SSID order by tiwai ]

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208555
Signed-off-by: Cameron Berkenpas <cam@neo-zeon.de>
Co-authored-by: Songine <donglingluoying@gmail.com>
Cc: stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220606002329.215330-1-cam@neo-zeon.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/conexant - Fix loopback issue with CX20632

commit d5ea7544c32ba27c2c5826248e4ff58bd50a2518 upstream.

On a machine with CX20632, Alsamixer doesn't have 'Loopback
Mixing' and 'Line'.

Signed-off-by: huangwenhui <huangwenhuia@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220607065631.10708-1-huangwenhuia@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Set up (implicit) sync for Saffire 6

commit e0469d6581aecb0e34e2ec64f39f88e6985cc52f upstream.

Focusrite Saffire 6 has fixed audioformat quirks with multiple
endpoints assigned to a single altsetting.  Unfortunately the generic
parser couldn't detect the sync endpoint correctly as the implicit
sync due to the missing EP attribute bits.  In the former kernels, it
used to work somehow casually, but it's been broken for a while after
the large code change in 5.11.

This patch cures the regression by the following:
- Allow the static quirk table to provide the sync EP information;
  we just need to fill the fields and let the generic parser skipping
  parsing if sync_ep is already set.
- Add the sync endpoint information to the entry for Saffire 6.

Fixes: 7b0efea4baf0 ("ALSA: usb-audio: Add missing ep_idx in fixed EP quirks")
Reported-and-tested-by: André Kapelrud <a.kapelrud@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220606160910.6926-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Skip generic sync EP parse for secondary EP

commit efb75df105e82f076a85b9f2d81410428bcb55fc upstream.

When ep_idx is already non-zero, it means usually a capture stream
that is set up explicity by a fixed-format quirk, and applying the
check for generic (non-implicit-fb) sync EPs might hit incorrectly,
resulting in a bogus sync endpoint for the capture stream.

This patch adds a check for the ep_idx and skip if it's a secondary
endpoint.  It's a part of the fixes for regressions on Saffire 6.

Fixes: 7b0efea4baf0 ("ALSA: usb-audio: Add missing ep_idx in fixed EP quirks")
Reported-and-tested-by: André Kapelrud <a.kapelrud@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220606160910.6926-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scripts/gdb: change kernel config dumping method

[ Upstream commit 1f7a6cf6b07c74a17343c2559cd5f5018a245961 ]

MAGIC_START("IKCFG_ST") and MAGIC_END("IKCFG_ED") are moved out
from the kernel_config_data variable.

Thus, we parse kernel_config_data directly instead of considering
offset of MAGIC_START and MAGIC_END.

Fixes: 13610aa908dc ("kernel/configs: use .incbin directive to embed config_data.gz")
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vringh: Fix loop descriptors check in the indirect cases

[ Upstream commit dbd29e0752286af74243cf891accf472b2f3edd8 ]

We should use size of descriptor chain to test loop condition
in the indirect case. And another statistical count is also introduced
for indirect descriptors to avoid conflict with the statistical count
of direct descriptors.

Fixes: f87d0fbb5798 ("vringh: host-side implementation of virtio rings.")
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Signed-off-by: Fam Zheng <fam.zheng@bytedance.com>
Message-Id: <20220505100910.137-1-xieyongji@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nodemask: Fix return values to be unsigned

[ Upstream commit 0dfe54071d7c828a02917b595456bfde1afdddc9 ]

The nodemask routines had mixed return values that provided potentially
signed return values that could never happen. This was leading to the
compiler getting confusing about the range of possible return values
(it was thinking things could be negative where they could not be). Fix
all the nodemask routines that should be returning unsigned
(or bool) values. Silences:

 mm/swapfile.c: In function ‘setup_swap_info’:
 mm/swapfile.c:2291:47: error: array subscript -1 is below array bounds of ‘struct plist_node[]’ [-Werror=array-bounds]
  2291 |                                 p->avail_lists[i].prio = 1;
       |                                 ~~~~~~~~~~~~~~^~~
 In file included from mm/swapfile.c:16:
 ./include/linux/swap.h:292:27: note: while referencing ‘avail_lists’
   292 |         struct plist_node avail_lists[]; /*
       |                           ^~~~~~~~~~~

Reported-by: Christophe de Dinechin <dinechin@redhat.com>
Link: https://lore.kernel.org/lkml/20220414150855.2407137-3-dinechin@redhat.com/
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/pm: use bitmap_{from,to}_arr32 where appropriate

[ Upstream commit 525d6515604eb1373ce5e6372a6b6640953b2d6a ]

The smu_v1X_0_set_allowed_mask() uses bitmap_copy() to convert
bitmap to 32-bit array. This may be wrong due to endiannes issues.
Fix it by switching to bitmap_{from,to}_arr32.

CC: Alexander Gordeev <agordeev@linux.ibm.com>
CC: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
CC: Christian Borntraeger <borntraeger@linux.ibm.com>
CC: Claudio Imbrenda <imbrenda@linux.ibm.com>
CC: David Hildenbrand <david@redhat.com>
CC: Heiko Carstens <hca@linux.ibm.com>
CC: Janosch Frank <frankja@linux.ibm.com>
CC: Rasmus Villemoes <linux@rasmusvillemoes.dk>
CC: Sven Schnelle <svens@linux.ibm.com>
CC: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: version operations for smb20 unneeded when legacy support disabled

[ Upstream commit 7ef93ffccd55fb0ba000ed16ef6a81cd7dee07b5 ]

We should not be including unused smb20 specific code when legacy
support is disabled (CONFIG_CIFS_ALLOW_INSECURE_LEGACY turned
off).  For example smb2_operations and smb2_values aren't used
in that case.  Over time we can move more and more SMB1/CIFS and SMB2.0
code into the insecure legacy ifdefs

Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/gmap: voluntarily schedule during key setting

[ Upstream commit 6d5946274df1fff539a7eece458a43be733d1db8 ]

With large and many guest with storage keys it is possible to create
large latencies or stalls during initial key setting:

rcu: INFO: rcu_sched self-detected stall on CPU
rcu:   18-....: (2099 ticks this GP) idle=54e/1/0x4000000000000002 softirq=35598716/35598716 fqs=998
       (t=2100 jiffies g=155867385 q=20879)
Task dump for CPU 18:
CPU 1/KVM       R  running task        0 1030947 256019 0x06000004
Call Trace:
sched_show_task
rcu_dump_cpu_stacks
rcu_sched_clock_irq
update_process_times
tick_sched_handle
tick_sched_timer
__hrtimer_run_queues
hrtimer_interrupt
do_IRQ
ext_int_handler
ptep_zap_key

The mmap lock is held during the page walking but since this is a
semaphore scheduling is still possible. Same for the kvm srcu.
To minimize overhead do this on every segment table entry or large page.

Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20220530092706.11637-2-borntraeger@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nbd: fix io hung while disconnecting device

[ Upstream commit 09dadb5985023e27d4740ebd17e6fea4640110e5 ]

In our tests, "qemu-nbd" triggers a io hung:

INFO: task qemu-nbd:11445 blocked for more than 368 seconds.
      Not tainted 5.18.0-rc3-next-20220422-00003-g2176915513ca #884
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:qemu-nbd        state:D stack:    0 pid:11445 ppid:     1 flags:0x00000000
Call Trace:
 <TASK>
 __schedule+0x480/0x1050
 ? _raw_spin_lock_irqsave+0x3e/0xb0
 schedule+0x9c/0x1b0
 blk_mq_freeze_queue_wait+0x9d/0xf0
 ? ipi_rseq+0x70/0x70
 blk_mq_freeze_queue+0x2b/0x40
 nbd_add_socket+0x6b/0x270 [nbd]
 nbd_ioctl+0x383/0x510 [nbd]
 blkdev_ioctl+0x18e/0x3e0
 __x64_sys_ioctl+0xac/0x120
 do_syscall_64+0x35/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fd8ff706577
RSP: 002b:00007fd8fcdfebf8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000040000000 RCX: 00007fd8ff706577
RDX: 000000000000000d RSI: 000000000000ab00 RDI: 000000000000000f
RBP: 000000000000000f R08: 000000000000fbe8 R09: 000055fe497c62b0
R10: 00000002aff20000 R11: 0000000000000246 R12: 000000000000006d
R13: 0000000000000000 R14: 00007ffe82dc5e70 R15: 00007fd8fcdff9c0

"qemu-ndb -d" will call ioctl 'NBD_DISCONNECT' first, however, following
message was found:

block nbd0: Send disconnect failed -32

Which indicate that something is wrong with the server. Then,
"qemu-nbd -d" will call ioctl 'NBD_CLEAR_SOCK', however ioctl can't clear
requests after commit 2516ab1543fd("nbd: only clear the queue on device
teardown"). And in the meantime, request can't complete through timeout
because nbd_xmit_timeout() will always return 'BLK_EH_RESET_TIMER', which
means such request will never be completed in this situation.

Now that the flag 'NBD_CMD_INFLIGHT' can make sure requests won't
complete multiple times, switch back to call nbd_clear_sock() in
nbd_clear_sock_ioctl(), so that inflight requests can be cleared.

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20220521073749.3146892-5-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nbd: fix race between nbd_alloc_config() and module removal

[ Upstream commit c55b2b983b0fa012942c3eb16384b2b722caa810 ]

When nbd module is being removing, nbd_alloc_config() may be
called concurrently by nbd_genl_connect(), although try_module_get()
will return false, but nbd_alloc_config() doesn't handle it.

The race may lead to the leak of nbd_config and its related
resources (e.g, recv_workq) and oops in nbd_read_stat() due
to the unload of nbd module as shown below:

  BUG: kernel NULL pointer dereference, address: 0000000000000040
  Oops: 0000 [#1] SMP PTI
  CPU: 5 PID: 13840 Comm: kworker/u17:33 Not tainted 5.14.0+ #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
  Workqueue: knbd16-recv recv_work [nbd]
  RIP: 0010:nbd_read_stat.cold+0x130/0x1a4 [nbd]
  Call Trace:
   recv_work+0x3b/0xb0 [nbd]
   process_one_work+0x1ed/0x390
   worker_thread+0x4a/0x3d0
   kthread+0x12a/0x150
   ret_from_fork+0x22/0x30

Fixing it by checking the return value of try_module_get()
in nbd_alloc_config(). As nbd_alloc_config() may return ERR_PTR(-ENODEV),
assign nbd->config only when nbd_alloc_config() succeeds to ensure
the value of nbd->config is binary (valid or NULL).

Also adding a debug message to check the reference counter
of nbd_config during module removal.

Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20220521073749.3146892-3-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nbd: call genl_unregister_family() first in nbd_cleanup()

[ Upstream commit 06c4da89c24e7023ea448cadf8e9daf06a0aae6e ]

Otherwise there may be race between module removal and the handling of
netlink command, which can lead to the oops as shown below:

  BUG: kernel NULL pointer dereference, address: 0000000000000098
  Oops: 0002 [#1] SMP PTI
  CPU: 1 PID: 31299 Comm: nbd-client Tainted: G            E     5.14.0-rc4
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
  RIP: 0010:down_write+0x1a/0x50
  Call Trace:
   start_creating+0x89/0x130
   debugfs_create_dir+0x1b/0x130
   nbd_start_device+0x13d/0x390 [nbd]
   nbd_genl_connect+0x42f/0x748 [nbd]
   genl_family_rcv_msg_doit.isra.0+0xec/0x150
   genl_rcv_msg+0xe5/0x1e0
   netlink_rcv_skb+0x55/0x100
   genl_rcv+0x29/0x40
   netlink_unicast+0x1a8/0x250
   netlink_sendmsg+0x21b/0x430
   ____sys_sendmsg+0x2a4/0x2d0
   ___sys_sendmsg+0x81/0xc0
   __sys_sendmsg+0x62/0xb0
   __x64_sys_sendmsg+0x1f/0x30
   do_syscall_64+0x3b/0xc0
   entry_SYSCALL_64_after_hwframe+0x44/0xae
  Modules linked in: nbd(E-)

Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20220521073749.3146892-2-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

jump_label,noinstr: Avoid instrumentation for JUMP_LABEL=n builds

[ Upstream commit 656d054e0a15ec327bd82801ccd58201e59f6896 ]

When building x86_64 with JUMP_LABEL=n it's possible for
instrumentation to sneak into noinstr:

vmlinux.o: warning: objtool: exit_to_user_mode+0x14: call to static_key_count.constprop.0() leaves .noinstr.text section
vmlinux.o: warning: objtool: syscall_exit_to_user_mode+0x2d: call to static_key_count.constprop.0() leaves .noinstr.text section
vmlinux.o: warning: objtool: irqentry_exit_to_user_mode+0x1b: call to static_key_count.constprop.0() leaves .noinstr.text section

Switch to arch_ prefixed atomic to avoid the explicit instrumentation.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/cpu: Elide KCSAN for cpu_has() and friends

[ Upstream commit a6a5eb269f6f3a2fe392f725a8d9052190c731e2 ]

As x86 uses the <asm-generic/bitops/instrumented-*.h> headers, the
regular forms of all bitops are instrumented with explicit calls to
KASAN and KCSAN checks. As these are explicit calls, these are not
suppressed by the noinstr function attribute.

This can result in calls to those check functions in noinstr code, which
objtool warns about:

vmlinux.o: warning: objtool: enter_from_user_mode+0x24: call to __kcsan_check_access() leaves .noinstr.text section
vmlinux.o: warning: objtool: syscall_enter_from_user_mode+0x28: call to __kcsan_check_access() leaves .noinstr.text section
vmlinux.o: warning: objtool: syscall_enter_from_user_mode_prepare+0x24: call to __kcsan_check_access() leaves .noinstr.text section
vmlinux.o: warning: objtool: irqentry_enter_from_user_mode+0x24: call to __kcsan_check_access() leaves .noinstr.text section

Prevent this by using the arch_*() bitops, which are the underlying
bitops without explciit instrumentation.

[null: Changelog]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220502111216.290518605@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

modpost: fix undefined behavior of is_arm_mapping_symbol()

[ Upstream commit d6b732666a1bae0df3c3ae06925043bba34502b1 ]

The return value of is_arm_mapping_symbol() is unpredictable when "$"
is passed in.

strchr(3) says:
  The strchr() and strrchr() functions return a pointer to the matched
  character or NULL if the character is not found. The terminating null
  byte is considered part of the string, so that if c is specified as
  '\0', these functions return a pointer to the terminator.

When str[1] is '\0', strchr("axtd", str[1]) is not NULL, and str[2] is
referenced (i.e. buffer overrun).

Test code
---------

  char str1[] = "abc";
  char str2[] = "ab";

  strcpy(str1, "$");
  strcpy(str2, "$");

  printf("test1: %d\n", is_arm_mapping_symbol(str1));
  printf("test2: %d\n", is_arm_mapping_symbol(str2));

Result
------

  test1: 0
  test2: 1

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

um: line: Use separate IRQs per line

[ Upstream commit d5a9597d6916a76663085db984cb8fe97f0a5c56 ]

Today, all possible serial lines (ssl*=) as well as all
possible consoles (con*=) each share a single interrupt
(with a fixed number) with others of the same type.

Now, if you have two lines, say ssl0 and ssl1, and one
of them is connected to an fd you cannot read (e.g. a
file), but the other gets a read interrupt, then both
of them get the interrupt since it's shared. Then, the
read() call will return EOF, since it's a file being
written and there's nothing to read (at least not at
the current offset, at the end).

Unfortunately, this is treated as a read error, and we
close this line, losing all the possible output.

It might be possible to work around this and make the
IRQ sharing work, however, now that we have dynamically
allocated IRQs that are easy to use, simply use that to
achieve separating between the events; then there's no
interrupt for that line and we never attempt the read
in the first place, thus not closing the line.

This manifested itself in the wifi hostap/hwsim tests
where the parallel script communicates via one serial
console and the kernel messages go to another (a file)
and sending data on the communication console caused
the kernel messages to stop flowing into the file.

Reported-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: anton ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/pm: Fix missing thermal throttler status

[ Upstream commit b0f4d663fce6a4232d3c20ce820f919111b1c60b ]

On aldebaran, when thermal throttling happens due to excessive GPU
temperature, the reason for throttling event is missed in warning
message. This patch fixes it.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/radeon: fix a possible null pointer dereference

[ Upstream commit a2b28708b645c5632dc93669ab06e97874c8244f ]

In radeon_fp_native_mode(), the return value of drm_mode_duplicate()
is assigned to mode, which will lead to a NULL pointer dereference
on failure of drm_mode_duplicate(). Add a check to avoid npd.

The failure status of drm_cvt_mode() on the other path is checked too.

Signed-off-by: Gong Yuanjun <ruc_gongyuanjun@163.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Check if modulo is 0 before dividing.

[ Upstream commit 49947b906a6bd9668eaf4f9cf691973c25c26955 ]

[How & Why]
If a value of 0 is read, then this will cause a divide-by-0 panic.

Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: David Galiffi <David.Galiffi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ceph: flush the mdlog for filesystem sync

[ Upstream commit 1b2ba3c5616e17ff951359e25c658a1c3f146f1e ]

Before waiting for a request's safe reply, we will send the mdlog flush
request to the relevant MDS. And this will also flush the mdlog for all
the other unsafe requests in the same session, so we can record the last
session and no need to flush mdlog again in the next loop. But there
still have cases that it may send the mdlog flush requst twice or more,
but that should be not often.

Rename wait_unsafe_requests() to
flush_mdlog_and_wait_mdsc_unsafe_requests() to make it more
descriptive.

[xiubli: fold in MDS request refcount leak fix from Jeff]

URL: https://tracker.ceph.com/issues/55284
URL: https://tracker.ceph.com/issues/55411
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ceph: allow ceph.dir.rctime xattr to be updatable

[ Upstream commit d7a2dc523085f8b8c60548ceedc696934aefeb0e ]

`rctime' has been a pain point in cephfs due to its buggy
nature - inconsistent values reported and those sorts.
Fixing rctime is non-trivial needing an overall redesign
of the entire nested statistics infrastructure.

As a workaround, PR

     http://github.com/ceph/ceph/pull/37938

allows this extended attribute to be manually set. This allows
users to "fixup" inconsistent rctime values. While this sounds
messy, its probably the wisest approach allowing users/scripts
to workaround buggy rctime values.

The above PR enables Ceph MDS to allow manually setting
rctime extended attribute with the corresponding user-land
changes. We may as well allow the same to be done via kclient
for parity.

Signed-off-by: Venky Shankar <vshankar@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "net: af_key: add check for pfkey_broadcast in function pfkey_process"

[ Upstream commit 9c90c9b3e50e16d03c7f87d63e9db373974781e0 ]

This reverts commit 4dc2a5a8f6754492180741facf2a8787f2c415d7.

A non-zero return value from pfkey_broadcast() does not necessarily mean
an error occurred as this function returns -ESRCH when no registered
listener received the message. In particular, a call with
BROADCAST_PROMISC_ONLY flag and null one_sk argument can never return
zero so that this commit in fact prevents processing any PF_KEY message.
One visible effect is that racoon daemon fails to find encryption
algorithms like aes and refuses to start.

Excluding -ESRCH return value would fix this but it's not obvious that
we really want to bail out here and most other callers of
pfkey_broadcast() also ignore the return value. Also, as pointed out by
Steffen Klassert, PF_KEY is kind of deprecated and newer userspace code
should use netlink instead so that we should only disturb the code for
really important fixes.

v2: add a comment explaining why is the return value ignored

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: myrb: Fix up null pointer access on myrb_cleanup()

[ Upstream commit f9f0a46141e2e39bedb4779c88380d1b5f018c14 ]

When myrb_probe() fails the callback might not be set, so we need to
validate the 'disable_intr' callback in myrb_cleanup() to not cause a null
pointer exception. And while at it do not call myrb_cleanup() if we cannot
enable the PCI device at all.

Link: https://lore.kernel.org/r/20220523120244.99515-1-hare@suse.de
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Tested-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md: protect md_unregister_thread from reentrancy

[ Upstream commit 1e267742283a4b5a8ca65755c44166be27e9aa0f ]

Generally, the md_unregister_thread is called with reconfig_mutex, but
raid_message in dm-raid doesn't hold reconfig_mutex to unregister thread,
so md_unregister_thread can be called simulitaneously from two call sites
in theory.

Then after previous commit which remove the protection of reconfig_mutex
for md_unregister_thread completely, the potential issue could be worse
than before.

Let's take pers_lock at the beginning of function to ensure reentrancy.

Reported-by: Donald Buczek <buczek@molgen.mpg.de>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog: wdat_wdt: Stop watchdog when rebooting the system

[ Upstream commit 27fdf84510a1374748904db43f6755f912736d92 ]

Executing reboot command several times on the machine "Dell
PowerEdge R740", UEFI security detection stopped machine
with the following prompt:

UEFI0082: The system was reset due to a timeout from the watchdog
timer. Check the System Event Log (SEL) or crash dumps from
Operating Sysstem to identify the source that triggered the
watchdog timer reset. Update the firmware or driver for the
identified device.

iDRAC has warning event: "The watchdog timer reset the system".

This patch fixes this issue by adding the reboot notifier.

Signed-off-by: Liu Xinpeng <liuxp11@chinatelecom.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/1650984810-6247-3-git-send-email-liuxp11@chinatelecom.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kernfs: Separate kernfs_pr_cont_buf and rename_lock.

[ Upstream commit 1a702dc88e150487c9c173a249b3d236498b9183 ]

Previously the protection of kernfs_pr_cont_buf was piggy backed by
rename_lock, which means that pr_cont() needs to be protected under
rename_lock. This can cause potential circular lock dependencies.

If there is an OOM, we have the following call hierarchy:

 -> cpuset_print_current_mems_allowed()
   -> pr_cont_cgroup_name()
     -> pr_cont_kernfs_name()

pr_cont_kernfs_name() will grab rename_lock and call printk. So we have
the following lock dependencies:

 kernfs_rename_lock -> console_sem

Sometimes, printk does a wakeup before releasing console_sem, which has
the dependence chain:

 console_sem -> p->pi_lock -> rq->lock

Now, imagine one wants to read cgroup_name under rq->lock, for example,
printing cgroup_name in a tracepoint in the scheduler code. They will
be holding rq->lock and take rename_lock:

 rq->lock -> kernfs_rename_lock

Now they will deadlock.

A prevention to this circular lock dependency is to separate the
protection of pr_cont_buf from rename_lock. In principle, rename_lock
is to protect the integrity of cgroup name when copying to buf. Once
pr_cont_buf has got its content, rename_lock can be dropped. So it's
safe to drop rename_lock after kernfs_name_locked (and
kernfs_path_from_node_locked) and rely on a dedicated pr_cont_lock
to protect pr_cont_buf.

Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220516190951.3144144-1-haoluo@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: msm_serial: disable interrupts in __msm_console_write()

[ Upstream commit aabdbb1b7a5819e18c403334a31fb0cc2c06ad41 ]

__msm_console_write() assumes that interrupts are disabled, but
with threaded console printers it is possible that the write()
callback of the console is called with interrupts enabled.

Explicitly disable interrupts using local_irq_save() to preserve
the assumed context.

Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20220506213324.470461-1-john.ogness@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: rtl8712: fix uninit-value in r871xu_drv_init()

[ Upstream commit 0458e5428e5e959d201a40ffe71d762a79ecedc4 ]

When 'tmpU1b' returns from r8712_read8(padapter, EE_9346CR) is 0,
'mac[6]' will not be initialized.

BUG: KMSAN: uninit-value in r871xu_drv_init+0x2d54/0x3070 drivers/staging/rtl8712/usb_intf.c:541
 r871xu_drv_init+0x2d54/0x3070 drivers/staging/rtl8712/usb_intf.c:541
 usb_probe_interface+0xf19/0x1600 drivers/usb/core/driver.c:396
 really_probe+0x653/0x14b0 drivers/base/dd.c:596
 __driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752
 driver_probe_device drivers/base/dd.c:782 [inline]
 __device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899
 bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427
 __device_attach+0x593/0x8e0 drivers/base/dd.c:970
 device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017
 bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487
 device_add+0x1fff/0x26e0 drivers/base/core.c:3405
 usb_set_configuration+0x37e9/0x3ed0 drivers/usb/core/message.c:2170
 usb_generic_driver_probe+0x13c/0x300 drivers/usb/core/generic.c:238
 usb_probe_device+0x309/0x570 drivers/usb/core/driver.c:293
 really_probe+0x653/0x14b0 drivers/base/dd.c:596
 __driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752
 driver_probe_device drivers/base/dd.c:782 [inline]
 __device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899
 bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427
 __device_attach+0x593/0x8e0 drivers/base/dd.c:970
 device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017
 bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487
 device_add+0x1fff/0x26e0 drivers/base/core.c:3405
 usb_new_device+0x1b8e/0x2950 drivers/usb/core/hub.c:2566
 hub_port_connect drivers/usb/core/hub.c:5358 [inline]
 hub_port_connect_change drivers/usb/core/hub.c:5502 [inline]
 port_event drivers/usb/core/hub.c:5660 [inline]
 hub_event+0x58e3/0x89e0 drivers/usb/core/hub.c:5742
 process_one_work+0xdb6/0x1820 kernel/workqueue.c:2307
 worker_thread+0x10b3/0x21e0 kernel/workqueue.c:2454
 kthread+0x3c7/0x500 kernel/kthread.c:377
 ret_from_fork+0x1f/0x30

Local variable mac created at:
 r871xu_drv_init+0x1771/0x3070 drivers/staging/rtl8712/usb_intf.c:394
 usb_probe_interface+0xf19/0x1600 drivers/usb/core/driver.c:396

KMSAN: uninit-value in r871xu_drv_init
https://syzkaller.appspot.com/bug?id=3cd92b1d85428b128503bfa7a250294c9ae00bd8

Reported-by: <syzbot+6f5ecd144854c0d8580b@syzkaller.appspotmail.com>
Tested-by: <syzbot+6f5ecd144854c0d8580b@syzkaller.appspotmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Wang Cheng <wanngchenng@gmail.com>
Link: https://lore.kernel.org/r/14c3886173dfa4597f0704547c414cfdbcd11d16.1652618244.git.wanngchenng@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: rtl8712: fix uninit-value in usb_read8() and friends

[ Upstream commit d1b57669732d09da7e13ef86d058dab0cd57f6e0 ]

When r8712_usbctrl_vendorreq() returns negative, 'data' in
usb_read{8,16,32} will not be initialized.

BUG: KMSAN: uninit-value in string_nocheck lib/vsprintf.c:643 [inline]
BUG: KMSAN: uninit-value in string+0x4ec/0x6f0 lib/vsprintf.c:725
 string_nocheck lib/vsprintf.c:643 [inline]
 string+0x4ec/0x6f0 lib/vsprintf.c:725
 vsnprintf+0x2222/0x3650 lib/vsprintf.c:2806
 va_format lib/vsprintf.c:1704 [inline]
 pointer+0x18e6/0x1f70 lib/vsprintf.c:2443
 vsnprintf+0x1a9b/0x3650 lib/vsprintf.c:2810
 vprintk_store+0x537/0x2150 kernel/printk/printk.c:2158
 vprintk_emit+0x28b/0xab0 kernel/printk/printk.c:2256
 dev_vprintk_emit+0x5ef/0x6d0 drivers/base/core.c:4604
 dev_printk_emit+0x1dd/0x21f drivers/base/core.c:4615
 __dev_printk+0x3be/0x440 drivers/base/core.c:4627
 _dev_info+0x1ea/0x22f drivers/base/core.c:4673
 r871xu_drv_init+0x1929/0x3070 drivers/staging/rtl8712/usb_intf.c:401
 usb_probe_interface+0xf19/0x1600 drivers/usb/core/driver.c:396
 really_probe+0x6c7/0x1350 drivers/base/dd.c:621
 __driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752
 driver_probe_device drivers/base/dd.c:782 [inline]
 __device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899
 bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427
 __device_attach+0x593/0x8e0 drivers/base/dd.c:970
 device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017
 bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487
 device_add+0x1fff/0x26e0 drivers/base/core.c:3405
 usb_set_configuration+0x37e9/0x3ed0 drivers/usb/core/message.c:2170
 usb_generic_driver_probe+0x13c/0x300 drivers/usb/core/generic.c:238
 usb_probe_device+0x309/0x570 drivers/usb/core/driver.c:293
 really_probe+0x6c7/0x1350 drivers/base/dd.c:621
 __driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752
 driver_probe_device drivers/base/dd.c:782 [inline]
 __device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899
 bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427
 __device_attach+0x593/0x8e0 drivers/base/dd.c:970
 device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017
 bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487
 device_add+0x1fff/0x26e0 drivers/base/core.c:3405
 usb_new_device+0x1b91/0x2950 drivers/usb/core/hub.c:2566
 hub_port_connect drivers/usb/core/hub.c:5363 [inline]
 hub_port_connect_change drivers/usb/core/hub.c:5507 [inline]
 port_event drivers/usb/core/hub.c:5665 [inline]
 hub_event+0x58e3/0x89e0 drivers/usb/core/hub.c:5747
 process_one_work+0xdb6/0x1820 kernel/workqueue.c:2289
 worker_thread+0x10d0/0x2240 kernel/workqueue.c:2436
 kthread+0x3c7/0x500 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30

Local variable data created at:
 usb_read8+0x5d/0x130 drivers/staging/rtl8712/usb_ops.c:33
 r8712_read8+0xa5/0xd0 drivers/staging/rtl8712/rtl8712_io.c:29

KMSAN: uninit-value in r871xu_drv_init
https://syzkaller.appspot.com/bug?id=3cd92b1d85428b128503bfa7a250294c9ae00bd8

Reported-by: <syzbot+6f5ecd144854c0d8580b@syzkaller.appspotmail.com>
Tested-by: <syzbot+6f5ecd144854c0d8580b@syzkaller.appspotmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Wang Cheng <wanngchenng@gmail.com>
Link: https://lore.kernel.org/r/b9b7a6ee02c02aa28054f5cf16129977775f3cd9.1652618244.git.wanngchenng@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clocksource/drivers/sp804: Avoid error on multiple instances

[ Upstream commit a98399cbc1e05f7b977419f03905501d566cf54e ]

When a machine sports more than one SP804 timer instance, we only bring
up the first one, since multiple timers of the same kind are not useful
to Linux. As this is intentional behaviour, we should not return an
error message, as we do today:
===============
[    0.000800] Failed to initialize '/bus@8000000/motherboard-bus@8000000/iofpga-bus@300000000/timer@120000': -22
===============

Replace the -EINVAL return with a debug message and return 0 instead.

Also we do not reach the init function anymore if the DT node is
disabled (as this is now handled by OF_DECLARE), so remove the explicit
check for that case.

This fixes a long standing bogus error when booting ARM's fastmodels.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20220506162522.3675399-1-andre.przywara@arm.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

extcon: Modify extcon device to be created after driver data is set

[ Upstream commit 5dcc2afe716d69f5112ce035cb14f007461ff189 ]

Currently, someone can invoke the sysfs such as state_show()
intermittently before dev_set_drvdata() is done.
And it can be a cause of kernel Oops because of edev is Null at that time.
So modified the driver registration to after setting drviver data.

- Oops's backtrace.

Backtrace:
[<c067865c>] (state_show) from [<c05222e8>] (dev_attr_show)
[<c05222c0>] (dev_attr_show) from [<c02c66e0>] (sysfs_kf_seq_show)
[<c02c6648>] (sysfs_kf_seq_show) from [<c02c496c>] (kernfs_seq_show)
[<c02c4938>] (kernfs_seq_show) from [<c025e2a0>] (seq_read)
[<c025e11c>] (seq_read) from [<c02c50a0>] (kernfs_fop_read)
[<c02c5064>] (kernfs_fop_read) from [<c0231cac>] (__vfs_read)
[<c0231c5c>] (__vfs_read) from [<c0231ee0>] (vfs_read)
[<c0231e34>] (vfs_read) from [<c0232464>] (ksys_read)
[<c02323f0>] (ksys_read) from [<c02324fc>] (sys_read)
[<c02324e4>] (sys_read) from [<c00091d0>] (__sys_trace_return)

Signed-off-by: bumwoo lee <bw365.lee@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

extcon: Fix extcon_get_extcon_dev() error handling

[ Upstream commit 58e4a2d27d3255e4e8c507fdc13734dccc9fc4c7 ]

The extcon_get_extcon_dev() function returns error pointers on error,
NULL when it's a -EPROBE_DEFER defer situation, and ERR_PTR(-ENODEV)
when the CONFIG_EXTCON option is disabled.  This is very complicated for
the callers to handle and a number of them had bugs that would lead to
an Oops.

In real life, there are two things which prevented crashes.  First,
error pointers would only be returned if there was bug in the caller
where they passed a NULL "extcon_name" and none of them do that.
Second, only two out of the eight drivers will build when CONFIG_EXTCON
is disabled.

The normal way to write this would be to return -EPROBE_DEFER directly
when appropriate and return NULL when CONFIG_EXTCON is disabled.  Then
the error handling is simple and just looks like:

dev->edev = extcon_get_extcon_dev(acpi_dev_name(adev));
if (IS_ERR(dev->edev))
return PTR_ERR(dev->edev);

For the two drivers which can build with CONFIG_EXTCON disabled, then
extcon_get_extcon_dev() will now return NULL which is not treated as an
error and the probe will continue successfully.  Those two drivers are
"typec_fusb302" and "max8997-battery".  In the original code, the
typec_fusb302 driver had an 800ms hang in tcpm_get_current_limit() but
now that function is a no-op.  For the max8997-battery driver everything
should continue working as is.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

misc: rtsx: set NULL intfdata when probe fails

[ Upstream commit f861d36e021e1ac4a0a2a1f6411d623809975d63 ]

rtsx_usb_probe() doesn't call usb_set_intfdata() to null out the
interface pointer when probe fails. This leaves a stale pointer.
Noticed the missing usb_set_intfdata() while debugging an unrelated
invalid DMA mapping problem.

Fix it with a call to usb_set_intfdata(..., NULL).

Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220429210913.46804-1-skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soundwire: qcom: adjust autoenumeration timeout

[ Upstream commit 74da272400b46f2e898f115d1b1cd60828766919 ]

Currently timeout for autoenumeration during probe and bus reset is set to
2 secs which is really a big value. This can have an adverse effect on
boot time if the slave device is not ready/reset.
This was the case with wcd938x which was not reset yet but we spent 2
secs waiting in the soundwire controller probe. Reduce this time to
1/10 of Hz which should be good enough time to finish autoenumeration
if any slaves are available on the bus.

Reported-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220506084705.18525-1-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc2: gadget: don't reset gadget's driver->bus

[ Upstream commit 3120aac6d0ecd9accf56894aeac0e265f74d3d5a ]

UDC driver should not touch gadget's driver internals, especially it
should not reset driver->bus. This wasn't harmful so far, but since
commit fc274c1e9973 ("USB: gadget: Add a new bus for gadgets") gadget
subsystem got it's own bus and messing with ->bus triggers the
following NULL pointer dereference:

dwc2 12480000.hsotg: bound driver g_ether
8<--- cut here ---
Unable to handle kernel NULL pointer dereference at virtual address 00000000
[00000000] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in: ...
CPU: 0 PID: 620 Comm: modprobe Not tainted 5.18.0-rc5-next-20220504 #11862
Hardware name: Samsung Exynos (Flattened Device Tree)
PC is at module_add_driver+0x44/0xe8
LR is at sysfs_do_create_link_sd+0x84/0xe0
...
Process modprobe (pid: 620, stack limit = 0x(ptrval))
...
 module_add_driver from bus_add_driver+0xf4/0x1e4
 bus_add_driver from driver_register+0x78/0x10c
 driver_register from usb_gadget_register_driver_owner+0x40/0xb4
 usb_gadget_register_driver_owner from do_one_initcall+0x44/0x1e0
 do_one_initcall from do_init_module+0x44/0x1c8
 do_init_module from load_module+0x19b8/0x1b9c
 load_module from sys_finit_module+0xdc/0xfc
 sys_finit_module from ret_fast_syscall+0x0/0x54
Exception stack(0xf1771fa8 to 0xf1771ff0)
...
dwc2 12480000.hsotg: new device is high-speed
---[ end trace 0000000000000000 ]---

Fix this by removing driver->bus entry reset.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20220505104618.22729-1-m.szyprowski@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sysrq: do not omit current cpu when showing backtrace of all active CPUs

[ Upstream commit 5390e7f46b9d5546d45a83e6463bc656678b1d0e ]

The backtrace of current CPU also should be printed as it is active. This
change add stack trace for current CPU and print a hint for idle CPU for
the generic workqueue based printing. (x86 already does this)

Now it looks like below:
[  279.401567] sysrq: Show backtrace of all active CPUs
[  279.407234] sysrq: CPU5:
[  279.407505] Call Trace:
[  279.408789] [<ffffffff8000606c>] dump_backtrace+0x2c/0x3a
[  279.411698] [<ffffffff800060ac>] show_stack+0x32/0x3e
[  279.411809] [<ffffffff80542258>] sysrq_handle_showallcpus+0x4c/0xc6
[  279.411929] [<ffffffff80542f16>] __handle_sysrq+0x106/0x26c
[  279.412034] [<ffffffff805436a8>] write_sysrq_trigger+0x64/0x74
[  279.412139] [<ffffffff8029cd48>] proc_reg_write+0x8e/0xe2
[  279.412252] [<ffffffff8021a8f8>] vfs_write+0x90/0x2be
[  279.412362] [<ffffffff8021acd2>] ksys_write+0xa6/0xce
[  279.412467] [<ffffffff8021ad24>] sys_write+0x2a/0x38
[  279.412689] [<ffffffff80003ff8>] ret_from_syscall+0x0/0x2
[  279.417173] sysrq: CPU6: backtrace skipped as idling
[  279.417185] sysrq: CPU4: backtrace skipped as idling
[  279.417187] sysrq: CPU0: backtrace skipped as idling
[  279.417181] sysrq: CPU7: backtrace skipped as idling
[  279.417190] sysrq: CPU1: backtrace skipped as idling
[  279.417193] sysrq: CPU3: backtrace skipped as idling
[  279.417219] sysrq: CPU2:
[  279.419179] Call Trace:
[  279.419440] [<ffffffff8000606c>] dump_backtrace+0x2c/0x3a
[  279.419782] [<ffffffff800060ac>] show_stack+0x32/0x3e
[  279.420015] [<ffffffff80542b30>] showacpu+0x5c/0x96
[  279.420317] [<ffffffff800ba71c>] flush_smp_call_function_queue+0xd6/0x218
[  279.420569] [<ffffffff800bb438>] generic_smp_call_function_single_interrupt+0x14/0x1c
[  279.420798] [<ffffffff800079ae>] handle_IPI+0xaa/0x13a
[  279.421024] [<ffffffff804dcb92>] riscv_intc_irq+0x56/0x70
[  279.421274] [<ffffffff80a05b70>] generic_handle_arch_irq+0x6a/0xfa
[  279.421518] [<ffffffff80004006>] ret_from_exception+0x0/0x10
[  279.421750] [<ffffffff80096492>] rcu_idle_enter+0x16/0x1e

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Link: https://lore.kernel.org/r/20220117154300.2808-1-changbin.du@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

char: xillybus: fix a refcount leak in cleanup_dev()

[ Upstream commit b67d19662fdee275c479d21853bc1239600a798f ]

usb_get_dev is called in xillyusb_probe. So it is better to call
usb_put_dev before xdev is released.

Acked-by: Eli Billauer <eli.billauer@gmail.com>
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20220406075703.23464-1-hbh25y@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: hcd-pci: Fully suspend across freeze/thaw cycle

[ Upstream commit 63acaa8e9c65dc34dc249440216f8e977f5d2748 ]

The documentation for the freeze() method says that it "should quiesce
the device so that it doesn't generate IRQs or DMA". The unspoken
consequence of not doing this is that MSIs aimed at non-boot CPUs may
get fully lost if they're sent during the period where the target CPU is
offline.

The current callbacks for USB HCD do not fully quiesce interrupts,
specifically on XHCI. Change to use the full suspend/resume flow for
freeze/thaw to ensure interrupts are fully quiesced. This fixes issues
where USB devices fail to thaw during hibernation because XHCI misses
its interrupt and cannot recover.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Evan Green <evgreen@chromium.org>
Link: https://lore.kernel.org/r/20220421103751.v3.2.I8226c7fdae88329ef70957b96a39b346c69a914e@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: usb: host: Fix deadlock in oxu_bus_suspend()

[ Upstream commit 4d378f2ae58138d4c55684e1d274e7dd94aa6524 ]

There is a deadlock in oxu_bus_suspend(), which is shown below:

   (Thread 1)              |      (Thread 2)
                           | timer_action()
oxu_bus_suspend()          |  mod_timer()
 spin_lock_irq() //(1)     |  (wait a time)
 ...                       | oxu_watchdog()
 del_timer_sync()          |  spin_lock_irq() //(2)
 (wait timer to stop)      |  ...

We hold oxu->lock in position (1) of thread 1, and use
del_timer_sync() to wait timer to stop, but timer handler
also need oxu->lock in position (2) of thread 2. As a result,
oxu_bus_suspend() will block forever.

This patch extracts del_timer_sync() from the protection of
spin_lock_irq(), which could let timer handler to obtain
the needed lock.

Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220417120305.64577-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: tty: serial: Fix deadlock in sa1100_set_termios()

[ Upstream commit 62b2caef400c1738b6d22f636c628d9f85cd4c4c ]

There is a deadlock in sa1100_set_termios(), which is shown
below:

   (Thread 1)              |      (Thread 2)
                           | sa1100_enable_ms()
sa1100_set_termios()       |  mod_timer()
 spin_lock_irqsave() //(1) |  (wait a time)
 ...                       | sa1100_timeout()
 del_timer_sync()          |  spin_lock_irqsave() //(2)
 (wait timer to stop)      |  ...

We hold sport->port.lock in position (1) of thread 1 and
use del_timer_sync() to wait timer to stop, but timer handler
also need sport->port.lock in position (2) of thread 2. As a result,
sa1100_set_termios() will block forever.

This patch moves del_timer_sync() before spin_lock_irqsave()
in order to prevent the deadlock.

Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220417111626.7802-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: host: isp116x: check return value after calling platform_get_resource()

[ Upstream commit 134a3408c2d3f7e23eb0e4556e0a2d9f36c2614e ]

It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.

Signed-off-by: Zhen Ni <nizhen@uniontech.com>
Link: https://lore.kernel.org/r/20220302033716.31272-1-nizhen@uniontech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: staging: rtl8192e: Fix deadlock in rtllib_beacons_stop()

[ Upstream commit 9b6bdbd9337de3917945847bde262a34a87a6303 ]

There is a deadlock in rtllib_beacons_stop(), which is shown
below:

   (Thread 1)              |      (Thread 2)
                           | rtllib_send_beacon()
rtllib_beacons_stop()      |  mod_timer()
 spin_lock_irqsave() //(1) |  (wait a time)
 ...                       | rtllib_send_beacon_cb()
 del_timer_sync()          |  spin_lock_irqsave() //(2)
 (wait timer to stop)      |  ...

We hold ieee->beacon_lock in position (1) of thread 1 and
use del_timer_sync() to wait timer to stop, but timer handler
also need ieee->beacon_lock in position (2) of thread 2.
As a result, rtllib_beacons_stop() will block forever.

This patch extracts del_timer_sync() from the protection of
spin_lock_irqsave(), which could let timer handler to obtain
the needed lock.

Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220417141641.124388-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: staging: rtl8192u: Fix deadlock in ieee80211_beacons_stop()

[ Upstream commit 806c7b53414934ba2a39449b31fd1a038e500273 ]

There is a deadlock in ieee80211_beacons_stop(), which is shown below:

   (Thread 1)              |      (Thread 2)
                           | ieee80211_send_beacon()
ieee80211_beacons_stop()   |  mod_timer()
 spin_lock_irqsave() //(1) |  (wait a time)
 ...                       | ieee80211_send_beacon_cb()
 del_timer_sync()          |  spin_lock_irqsave() //(2)
 (wait timer to stop)      |  ...

We hold ieee->beacon_lock in position (1) of thread 1 and use
del_timer_sync() to wait timer to stop, but timer handler
also need ieee->beacon_lock in position (2) of thread 2.
As a result, ieee80211_beacons_stop() will block forever.

This patch extracts del_timer_sync() from the protection of
spin_lock_irqsave(), which could let timer handler to obtain
the needed lock.

Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220417135407.109536-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thunderbolt: Use different lane for second DisplayPort tunnel

[ Upstream commit 9d2d0a5cf0ca063f417681cc33e767ce52615286 ]

Brad reported that on Apple hardware with Light Ridge or Falcon Ridge
controller, plugging in a chain of Thunderbolt displays (Light Ridge
based controllers) causes all kinds of tearing and flickering. The
reason for this is that on Thunderbolt 1 hardware there is no lane
bonding so we have two independent 10 Gb/s lanes, and currently Linux
tunnels both displays through the lane 1. This makes the displays to
share the 10 Gb/s bandwidth which may not be enough for higher
resolutions.

For this reason make the second tunnel go through the lane 0 instead.
This seems to match what the macOS connection manager is also doing.

Reported-by: Brad Campbell <lists2009@fnarfbargle.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Brad Campbell <lists2009@fnarfbargle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: Fix a possible resource leak in icom_probe

[ Upstream commit ee157a79e7c82b01ae4c25de0ac75899801f322c ]

When pci_read_config_dword failed, call pci_release_regions() and
pci_disable_device() to recycle the resource previously allocated.

Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Huang Guobin <huangguobin4@huawei.com>
Link: https://lore.kernel.org/r/20220331091005.3290753-1-huangguobin4@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: synclink_gt: Fix null-pointer-dereference in slgt_clean()

[ Upstream commit 689ca31c542687709ba21ec2195c1fbce34fd029 ]

When the driver fails at alloc_hdlcdev(), and then we remove the driver
module, we will get the following splat:

[   25.065966] general protection fault, probably for non-canonical address 0xdffffc0000000182: 0000 [#1] PREEMPT SMP KASAN PTI
[   25.066914] KASAN: null-ptr-deref in range [0x0000000000000c10-0x0000000000000c17]
[   25.069262] RIP: 0010:detach_hdlc_protocol+0x2a/0x3e0
[   25.077709] Call Trace:
[   25.077924]  <TASK>
[   25.078108]  unregister_hdlc_device+0x16/0x30
[   25.078481]  slgt_cleanup+0x157/0x9f0 [synclink_gt]

Fix this by checking whether the 'info->netdev' is a null pointer first.

Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/20220410114814.3920474-1-zheyuma97@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: staging: rtl8192bs: Fix deadlock in rtw_joinbss_event_prehandle()

[ Upstream commit 041879b12ddb0c6c83ed9c0bdd10dc82a056f2fc ]

There is a deadlock in rtw_joinbss_event_prehandle(), which is shown
below:

   (Thread 1)                |      (Thread 2)
                             | _set_timer()
rtw_joinbss_event_prehandle()|  mod_timer()
 spin_lock_bh() //(1)        |  (wait a time)
 ...                         | _rtw_join_timeout_handler()
 del_timer_sync()            |  spin_lock_bh() //(2)
 (wait timer to stop)        |  ...

We hold pmlmepriv->lock in position (1) of thread 1 and
use del_timer_sync() to wait timer to stop, but timer handler
also need pmlmepriv->lock in position (2) of thread 2.
As a result, rtw_joinbss_event_prehandle() will block forever.

This patch extracts del_timer_sync() from the protection of
spin_lock_bh(), which could let timer handler to obtain
the needed lock. What`s more, we change spin_lock_bh() to
spin_lock_irq() in _rtw_join_timeout_handler() in order to
prevent deadlock.

Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220409064953.67420-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>