fsdax: zero the edges if source is HOLE or UNWRITTEN

If srcmap contains invalid data, such as HOLE and UNWRITTEN, the dest page
should be zeroed.  Otherwise, since it's a pmem, old data may remains on
the dest page, the result of CoW will be incorrect.

The function name is also not easy to understand, rename it to
"dax_iomap_copy_around()", which means it copies data around the range.

[akpm@linux-foundation.org: update dax_iomap_copy_around() kerneldoc, per Darrick]
Link: https://lkml.kernel.org/r/1669973145-318-1-git-send-email-ruansy.fnst@fujitsu.com
Link: https://lkml.kernel.org/r/1669908538-55-4-git-send-email-ruansy.fnst@fujitsu.com
Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

fsdax: invalidate pages when CoW

CoW changes the share state of a dax page, but the share count of the page
isn't updated.  The next time access this page, it should have been a
newly accessed, but old association exists.  So, we need to clear the
share state when CoW happens, in both dax_iomap_rw() and dax_zero_iter().

Link: https://lkml.kernel.org/r/1669908538-55-3-git-send-email-ruansy.fnst@fujitsu.com
Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

fsdax: introduce page->share for fsdax in reflink mode

Patch series "fsdax,xfs: fix warning messages", v2.

Many testcases failed in dax+reflink mode with warning message in dmesg.
Such as generic/051,075,127.  The warning message is like this:
[  775.509337] ------------[ cut here ]------------
[  775.509636] WARNING: CPU: 1 PID: 16815 at fs/dax.c:386 dax_insert_entry.cold+0x2e/0x69
[  775.510151] Modules linked in: auth_rpcgss oid_registry nfsv4 algif_hash af_alg af_packet nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables nfnetlink ip6table_filter ip6_tables iptable_filter ip_tables x_tables dax_pmem nd_pmem nd_btt sch_fq_codel configfs xfs libcrc32c fuse
[  775.524288] CPU: 1 PID: 16815 Comm: fsx Kdump: loaded Tainted: G        W          6.1.0-rc4+ #164 eb34e4ee4200c7cbbb47de2b1892c5a3e027fd6d
[  775.524904] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Arch Linux 1.16.0-3-3 04/01/2014
[  775.525460] RIP: 0010:dax_insert_entry.cold+0x2e/0x69
[  775.525797] Code: c7 c7 18 eb e0 81 48 89 4c 24 20 48 89 54 24 10 e8 73 6d ff ff 48 83 7d 18 00 48 8b 54 24 10 48 8b 4c 24 20 0f 84 e3 e9 b9 ff <0f> 0b e9 dc e9 b9 ff 48 c7 c6 a0 20 c3 81 48 c7 c7 f0 ea e0 81 48
[  775.526708] RSP: 0000:ffffc90001d57b30 EFLAGS: 00010082
[  775.527042] RAX: 000000000000002a RBX: 0000000000000000 RCX: 0000000000000042
[  775.527396] RDX: ffffea000a0f6c80 RSI: ffffffff81dfab1b RDI: 00000000ffffffff
[  775.527819] RBP: ffffea000a0f6c40 R08: 0000000000000000 R09: ffffffff820625e0
[  775.528241] R10: ffffc90001d579d8 R11: ffffffff820d2628 R12: ffff88815fc98320
[  775.528598] R13: ffffc90001d57c18 R14: 0000000000000000 R15: 0000000000000001
[  775.528997] FS:  00007f39fc75d740(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000
[  775.529474] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  775.529800] CR2: 00007f39fc772040 CR3: 0000000107eb6001 CR4: 00000000003706e0
[  775.530214] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  775.530592] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  775.531002] Call Trace:
[  775.531230]  <TASK>
[  775.531444]  dax_fault_iter+0x267/0x6c0
[  775.531719]  dax_iomap_pte_fault+0x198/0x3d0
[  775.532002]  __xfs_filemap_fault+0x24a/0x2d0 [xfs aa8d25411432b306d9554da38096f4ebb86bdfe7]
[  775.532603]  __do_fault+0x30/0x1e0
[  775.532903]  do_fault+0x314/0x6c0
[  775.533166]  __handle_mm_fault+0x646/0x1250
[  775.533480]  handle_mm_fault+0xc1/0x230
[  775.533810]  do_user_addr_fault+0x1ac/0x610
[  775.534110]  exc_page_fault+0x63/0x140
[  775.534389]  asm_exc_page_fault+0x22/0x30
[  775.534678] RIP: 0033:0x7f39fc55820a
[  775.534950] Code: 00 01 00 00 00 74 99 83 f9 c0 0f 87 7b fe ff ff c5 fe 6f 4e 20 48 29 fe 48 83 c7 3f 49 8d 0c 10 48 83 e7 c0 48 01 fe 48 29 f9 <f3> a4 c4 c1 7e 7f 00 c4 c1 7e 7f 48 20 c5 f8 77 c3 0f 1f 44 00 00
[  775.535839] RSP: 002b:00007ffc66a08118 EFLAGS: 00010202
[  775.536157] RAX: 00007f39fc772001 RBX: 0000000000042001 RCX: 00000000000063c1
[  775.536537] RDX: 0000000000006400 RSI: 00007f39fac42050 RDI: 00007f39fc772040
[  775.536919] RBP: 0000000000006400 R08: 00007f39fc772001 R09: 0000000000042000
[  775.537304] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000001
[  775.537694] R13: 00007f39fc772000 R14: 0000000000006401 R15: 0000000000000003
[  775.538086]  </TASK>
[  775.538333] ---[ end trace 0000000000000000 ]---

This also affects dax+noreflink mode if we run the test after a
dax+reflink test.  So, the most urgent thing is solving the warning
messages.

With these fixes, most warning messages in dax_associate_entry() are gone.
But honestly, generic/388 will randomly failed with the warning.  The
case shutdown the xfs when fsstress is running, and do it for many times.
I think the reason is that dax pages in use are not able to be invalidated
in time when fs is shutdown.  The next time dax page to be associated, it
still remains the mapping value set last time.  I'll keep on solving it.

The warning message in dax_writeback_one() can also be fixed because of
the dax unshare.

This patch (of 8):

fsdax page is used not only when CoW, but also mapread.  To make the it
easily understood, use 'share' to indicate that the dax page is shared by
more than one extent.  And add helper functions to use it.

Also, the flag needs to be renamed to PAGE_MAPPING_DAX_SHARED.

[ruansy.fnst@fujitsu.com: rename several functions]
Link: https://lkml.kernel.org/r/1669972991-246-1-git-send-email-ruansy.fnst@fujitsu.com
[ruansy.fnst@fujitsu.com: v2.2]
Link: https://lkml.kernel.org/r/1670381359-53-1-git-send-email-ruansy.fnst@fujitsu.com
Link: https://lkml.kernel.org/r/1669908538-55-1-git-send-email-ruansy.fnst@fujitsu.com
Link: https://lkml.kernel.org/r/1669908538-55-2-git-send-email-ruansy.fnst@fujitsu.com
Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/damon: test removed scheme sysfs dir access bug

A DAMON sysfs user could start DAMON with a scheme, remove the sysfs
directory for the scheme, and then ask stats or schemes tried regions
update.  The related logic were not aware of the already removed directory
situation, so it was able to results in invalid memory accesses.  The fix
has made with commit 8468b486612c ("mm/damon/sysfs-schemes: skip stats
update if the scheme directory is removed"), though.  Add a selftest to
prevent such kinds of bugs from being introduced again.

Link: https://lkml.kernel.org/r/20221201170834.62823-1-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

kasan: fail non-kasan KUnit tests on KASAN reports

After the recent changes done to KUnit-enabled KASAN tests, non-KASAN
KUnit tests stopped being failed when KASAN report is detected.

Recover that property by failing the currently running non-KASAN KUnit
test when KASAN detects and prints a report for a bad memory access.

Note that if the bad accesses happened in a kernel thread that doesn't
have a reference to the currently running KUnit-test available via
current->kunit_test, the test won't be failed.  This is a limitation of
KUnit, which doesn't yet provide a thread-agnostic way to find the
reference to the currenly running test.

Link: https://lkml.kernel.org/r/7be29a8ea967cee6b7e48d3d5a242d1d0bd96851.1669820505.git.andreyknvl@google.com
Fixes: 49d9977ac909 ("kasan: check CONFIG_KASAN_KUNIT_TEST instead of CONFIG_KUNIT")
Fixes: 7ce0ea19d50e ("kasan: switch kunit tests to console tracepoints")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: David Gow <davidgow@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/hugetlb: change hugetlb allocation functions to return a folio

Many hugetlb allocation helper functions have now been converting to
folios, update their higher level callers to be compatible with folios.
alloc_pool_huge_page is reorganized to avoid a smatch warning reporting
the folio variable is uninitialized.

[sidhartha.kumar@oracle.com: update alloc_and_dissolve_hugetlb_folio comments]
Link: https://lkml.kernel.org/r/20221206233512.146535-1-sidhartha.kumar@oracle.com
Link: https://lkml.kernel.org/r/20221129225039.82257-11-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reported-by: Wei Chen <harperchen1110@gmail.com>
Suggested-by: John Hubbard <jhubbard@nvidia.com>
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Tarun Sahu <tsahu@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/hugetlb: convert hugetlb prep functions to folios

Convert prep_new_huge_page() and __prep_compound_gigantic_page() to
folios.

Link: https://lkml.kernel.org/r/20221129225039.82257-10-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Tarun Sahu <tsahu@linux.ibm.com>
Cc: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/hugetlb: convert free_gigantic_page() to folios

Convert callers of free_gigantic_page() to use folios, function is then
renamed to free_gigantic_folio().

Link: https://lkml.kernel.org/r/20221129225039.82257-9-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Tarun Sahu <tsahu@linux.ibm.com>
Cc: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/hugetlb: convert enqueue_huge_page() to folios

Convert callers of enqueue_huge_page() to pass in a folio, function is
renamed to enqueue_hugetlb_folio().

Link: https://lkml.kernel.org/r/20221129225039.82257-8-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Tarun Sahu <tsahu@linux.ibm.com>
Cc: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/hugetlb: convert add_hugetlb_page() to folios and add hugetlb_cma_folio()

Convert add_hugetlb_page() to take in a folio, also convert
hugetlb_cma_page() to take in a folio.

Link: https://lkml.kernel.org/r/20221129225039.82257-7-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Tarun Sahu <tsahu@linux.ibm.com>
Cc: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/hugetlb: convert update_and_free_page() to folios

Make more progress on converting the free_huge_page() destructor to
operate on folios by converting update_and_free_page() to folios.

Link: https://lkml.kernel.org/r/20221129225039.82257-6-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>\
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Tarun Sahu <tsahu@linux.ibm.com>
Cc: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/hugetlb: convert remove_hugetlb_page() to folios

Removes page_folio() call by converting callers to directly pass a folio
into __remove_hugetlb_page().

Link: https://lkml.kernel.org/r/20221129225039.82257-5-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Tarun Sahu <tsahu@linux.ibm.com>
Cc: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/hugetlb: convert dissolve_free_huge_page() to folios

Removes compound_head() call by using a folio rather than a head page.

Link: https://lkml.kernel.org/r/20221129225039.82257-4-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Tarun Sahu <tsahu@linux.ibm.com>
Cc: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/hugetlb: convert destroy_compound_gigantic_page() to folios

Convert page operations within __destroy_compound_gigantic_page() to the
corresponding folio operations.

Link: https://lkml.kernel.org/r/20221129225039.82257-3-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Tarun Sahu <tsahu@linux.ibm.com>
Cc: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: add folio dtor and order setter functions

Patch series "convert core hugetlb functions to folios", v5.

============== OVERVIEW ===========================
Now that many hugetlb helper functions that deal with hugetlb specific
flags[1] and hugetlb cgroups[2] are converted to folios, higher level
allocation, prep, and freeing functions within hugetlb can also be
converted to operate in folios.

Patch 1 of this series implements the wrapper functions around setting the
compound destructor and compound order for a folio.  Besides the user
added in patch 1, patch 2 and patch 9 also use these helper functions.

Patches 2-10 convert the higher level hugetlb functions to folios.

============== TESTING ===========================
LTP:
Ran 10 back to back rounds of the LTP hugetlb test suite.

Gigantic Huge Pages:
Test allocation and freeing via hugeadm commands:
hugeadm --pool-pages-min 1GB:10
hugeadm --pool-pages-min 1GB:0

Demote:
Demote 1 1GB hugepages to 512 2MB hugepages
echo 1 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
echo 1 > /sys/kernel/mm/hugepages/hugepages-1048576kB/demote
cat /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
# 512
cat /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
# 0

[1] https://lore.kernel.org/lkml/20220922154207.1575343-1-sidhartha.kumar@oracle.com/
[2] https://lore.kernel.org/linux-mm/20221101223059.460937-1-sidhartha.kumar@oracle.com/

This patch (of 10):

Add folio equivalents for set_compound_order() and
set_compound_page_dtor().

Also remove extra new-lines introduced by mm/hugetlb: convert
move_hugetlb_state() to folios and mm/hugetlb_cgroup: convert
hugetlb_cgroup_uncharge_page() to folios.

[sidhartha.kumar@oracle.com: clarify folio_set_compound_order() zero support]
Link: https://lkml.kernel.org/r/20221207223731.32784-1-sidhartha.kumar@oracle.com
Link: https://lkml.kernel.org/r/20221129225039.82257-1-sidhartha.kumar@oracle.com
Link: https://lkml.kernel.org/r/20221129225039.82257-2-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Suggested-by: Mike Kravetz <mike.kravetz@oracle.com>
Suggested-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Tarun Sahu <tsahu@linux.ibm.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

folio-compat: remove lru_cache_add()

There are no longer any callers of lru_cache_add(), so remove it.  This
saves 79 bytes of kernel text.  Also cleanup some comments such that
they reference the new folio_add_lru() instead.

Link: https://lkml.kernel.org/r/20221101175326.13265-6-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

khugepage: replace lru_cache_add() with folio_add_lru()

Replaces some calls with their folio equivalents.  This is in preparation
for the removal of lru_cache_add().  This replaces 3 calls to
compound_head() with 1.

Link: https://lkml.kernel.org/r/20221101175326.13265-5-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

userfaultfd: replace lru_cache functions with folio_add functions

Replaces lru_cache_add() and lru_cache_add_inactive_or_unevictable() with
folio_add_lru() and folio_add_lru_vma().  This is in preparation for the
removal of lru_cache_add().

Link: https://lkml.kernel.org/r/20221101175326.13265-4-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

fuse: convert fuse_try_move_page() to use folios

Converts the function to try to move folios instead of pages. Also
converts fuse_check_page() to fuse_get_folio() since this is its only
caller. This change removes 15 calls to compound_head().

Link: https://lkml.kernel.org/r/20221101175326.13265-3-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

filemap: convert replace_page_cache_page() to replace_page_cache_folio()

Patch series "Removing the lru_cache_add() wrapper".

This patchset replaces all calls of lru_cache_add() with the folio
equivalent: folio_add_lru().  This is allows us to get rid of the wrapper
The series passes xfstests and the userfaultfd selftests.

This patch (of 5):

Eliminates 7 calls to compound_head().

Link: https://lkml.kernel.org/r/20221101175326.13265-1-vishal.moola@gmail.com
Link: https://lkml.kernel.org/r/20221101175326.13265-2-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

LoongArch: enable ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP

The feature of minimizing overhead of struct page associated with each
HugeTLB page is implemented on x86_64.  However, the infrastructure of
this feature is already there, so just select ARCH_WANT_HUGETLB_PAGE_
OPTIMIZE_VMEMMAP is enough to enable this feature for LoongArch.

Link: https://lkml.kernel.org/r/20221027125253.3458989-5-chenhuacai@loongson.cn
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Min Zhou <zhoumin@loongson.cn>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Will Deacon <will@kernel.org>
Cc: Xuefeng Li <lixuefeng@loongson.cn>
Cc: Xuerui Wang <kernel@xen0n.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/sparse-vmemmap: generalise vmemmap_populate_hugepages()

Generalise vmemmap_populate_hugepages() so ARM64 & X86 & LoongArch can
share its implementation.

Link: https://lkml.kernel.org/r/20221027125253.3458989-4-chenhuacai@loongson.cn
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Min Zhou <zhoumin@loongson.cn>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Xuefeng Li <lixuefeng@loongson.cn>
Cc: Xuerui Wang <kernel@xen0n.name>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

LoongArch: add sparse memory vmemmap support

Add sparse memory vmemmap support for LoongArch.  SPARSEMEM_VMEMMAP uses a
virtually mapped memmap to optimise pfn_to_page and page_to_pfn
operations.  This is the most efficient option when sufficient kernel
resources are available.

Link: https://lkml.kernel.org/r/20221027125253.3458989-3-chenhuacai@loongson.cn
Signed-off-by: Min Zhou <zhoumin@loongson.cn>
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Will Deacon <will@kernel.org>
Cc: Xuefeng Li <lixuefeng@loongson.cn>
Cc: Xuerui Wang <kernel@xen0n.name>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

MIPS&LoongArch&NIOS2: adjust prototypes of p?d_init()

Patch series "mm/sparse-vmemmap: Generalise helpers and enable for
LoongArch", v14.

This series is in order to enable sparse-vmemmap for LoongArch.  But
LoongArch cannot use generic helpers directly because MIPS&LoongArch need
to call pgd_init()/pud_init()/pmd_init() when populating page tables.  So
we adjust the prototypes of p?d_init() to make generic helpers can call
them, then enable sparse-vmemmap with generic helpers, and to be further,
generalise vmemmap_populate_hugepages() for ARM64, X86 and LoongArch.

This patch (of 4):

We are preparing to add sparse vmemmap support to LoongArch.  MIPS and
LoongArch need to call pgd_init()/pud_init()/pmd_init() when populating
page tables, so adjust their prototypes to make generic helpers can call
them.

NIOS2 declares pmd_init() but doesn't use, just remove it to avoid build
errors.

Link: https://lkml.kernel.org/r/20221027125253.3458989-1-chenhuacai@loongson.cn
Link: https://lkml.kernel.org/r/20221027125253.3458989-2-chenhuacai@loongson.cn
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Will Deacon <will@kernel.org>
Cc: Xuefeng Li <lixuefeng@loongson.cn>
Cc: Xuerui Wang <kernel@xen0n.name>
Cc: Min Zhou <zhoumin@loongson.cn>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

kmsan: allow using __msan_instrument_asm_store() inside runtime

In certain cases (e.g.  when handling a softirq)
__msan_instrument_asm_store(&var, sizeof(var)) may be called with from
within KMSAN runtime, but later the value of @var is used with
!kmsan_in_runtime(), leading to false positives.

Because kmsan_internal_unpoison_memory() doesn't take locks, it should be
fine to call it without kmsan_in_runtime() checks, which fixes the
mentioned false positives.

Link: https://lkml.kernel.org/r/20221128094541.2645890-2-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Marco Elver <elver@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

lockdep: allow instrumenting lockdep.c with KMSAN

Lockdep and KMSAN used to play badly together, causing deadlocks when
KMSAN instrumentation of lockdep.c called lockdep functions recursively.

Looks like this is no more the case, and a kernel can run (yet slower)
with both KMSAN and lockdep enabled.  This patch should fix false
positives on wq_head->lock->dep_map, which KMSAN used to consider
uninitialized because of lockdep.c not being instrumented.

Link: https://lore.kernel.org/lkml/Y3b9AAEKp2Vr3e6O@sol.localdomain/
Link: https://lkml.kernel.org/r/20221128094541.2645890-1-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: Eric Biggers <ebiggers@kernel.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Marco Elver <elver@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

include/linux/pgtable.h: : remove redundant pte variable

Return value from ptep_get_and_clear_full() directly instead of taking
this in another redundant variable.

Link: https://lkml.kernel.org/r/202211282107437343474@zte.com.cn
Signed-off-by: zhang songyi <zhang.songyi@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/fadvise: use LLONG_MAX instead of -1 for eof

generic_fadvise() sets endbyte = -1 to specify end of file (i.e.  if
length == 0 is passed from userspace).  Most other callers to
filemap_fdatawrite_range() use LLONG_MAX for this purpose, particularly if
they also call fdatawait_range() (which requires end >= start).  For
example, sync_file_range(), vfs_fsync() (where the range is passed down
through per-fs ->fsync() callbacks), filemap_flush(), etc.
generic_fadvise() does not currently wait on writeback, but fix the call
up to be consistent with other callers.

Link: https://lkml.kernel.org/r/20221128155632.3950447-3-bfoster@redhat.com
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

filemap: skip write and wait if end offset precedes start

Patch series "filemap: skip write and wait if end offset precedes start",
v2.

A fix for the odd write and wait behavior described in the patch 1 commit
log.  Technically patch 1 could simply remove the check rather than lift
it into the callers, but this seemed a bit more user friendly to me.
Patch 2 is appended after observation that fadvise() interacted poorly
with the v1 patch.  This is no longer a problem with v2, making patch 2
purely a cleanup.

This series survived both fstests and ltp regression runs without
observable problems.  I had (end < start) warning checks in each relevant
function, with fadvise() being the only caller that triggered them.  That
said, I dropped the warnings after testing because there seemed to much
potential for noise from the various other callers.

This patch (of 2):

A call to file[map]_write_and_wait_range() with an end offset that
precedes the start offset but happens to land in the same page can trigger
writeback submission but fails to wait on the submitted page.  Writeback
submission occurs because __filemap_fdatawrite_range() passes both offsets
down into write_cache_pages(), which rounds down to page indexes before it
starts processing writeback.  However, __filemap_fdatawait_range()
immediately returns if the byte-granular end offset precedes the start
offset.

This behavior was observed in the form of unpredictable latency from a
frequent write and wait call with incorrect parameters.  The behavior gave
the impression that the fdatawait path might occasionally fail to wait on
writeback, but further investigation showed the latency was from
write_cache_pages() waiting on writeback state to clear for a page already
under writeback.  Therefore, this indicated that fdatawait actually never
waits on writeback in this particular situation.

The byte granular check in __filemap_fdatawait_range() goes all the way
back to the old wait_on_page_writeback() helper.  It originally used page
offsets and so would have waited in this problematic case.  That changed
to byte granularity file offsets in commit 94004ed726f3 ("kill
wait_on_page_writeback_range"), which subtly changed this behavior.  The
check itself has become somewhat redundant since the error checking code
that used to follow the wait loop (at the time of the aforementioned
commit) has now been removed and lifted into the higher level callers.

Therefore, we can restore historical fdatawait behavior by simply removing
the check.  Since the current fdatawait behavior has been in place for
quite some time and is consistent with other interfaces that use file
offsets, instead lift the check into the file[map]_write_and_wait_range()
helpers to provide consistent behavior between the write and wait.

Link: https://lkml.kernel.org/r/20221128155632.3950447-1-bfoster@redhat.com
Link: https://lkml.kernel.org/r/20221128155632.3950447-2-bfoster@redhat.com
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

zsmalloc: implement writeback mechanism for zsmalloc

This commit adds the writeback mechanism for zsmalloc, analogous to the
zbud allocator.  Zsmalloc will attempt to determine the coldest zspage
(i.e least recently used) in the pool, and attempt to write back all the
stored compressed objects via the pool's evict handler.

Link: https://lkml.kernel.org/r/20221128191616.1261026-7-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

zsmalloc: add zpool_ops field to zs_pool to store evict handlers

This adds a new field to zs_pool to store evict handlers for writeback,
analogous to the zbud allocator.

Link: https://lkml.kernel.org/r/20221128191616.1261026-6-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

zsmalloc: add a LRU to zs_pool to keep track of zspages in LRU order

This helps determines the coldest zspages as candidates for writeback.

Link: https://lkml.kernel.org/r/20221128191616.1261026-5-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

zsmalloc: consolidate zs_pool's migrate_lock and size_class's locks

Currently, zsmalloc has a hierarchy of locks, which includes a pool-level
migrate_lock, and a lock for each size class.  We have to obtain both
locks in the hotpath in most cases anyway, except for zs_malloc.  This
exception will no longer exist when we introduce a LRU into the zs_pool
for the new writeback functionality - we will need to obtain a pool-level
lock to synchronize LRU handling even in zs_malloc.

In preparation for zsmalloc writeback, consolidate these locks into a
single pool-level lock, which drastically reduces the complexity of
synchronization in zsmalloc.

We have also benchmarked the lock consolidation to see the performance
effect of this change on zram.

First, we ran a synthetic FS workload on a server machine with 36 cores
(same machine for all runs), using

fs_mark  -d  ../zram1mnt  -s  100000  -n  2500  -t  32  -k

before and after for btrfs and ext4 on zram (FS usage is 80%).

Here is the result (unit is file/second):

With lock consolidation (btrfs):
Average: 13520.2, Median: 13531.0, Stddev: 137.5961482019028

Without lock consolidation (btrfs):
Average: 13487.2, Median: 13575.0, Stddev: 309.08283679298665

With lock consolidation (ext4):
Average: 16824.4, Median: 16839.0, Stddev: 89.97388510006668

Without lock consolidation (ext4)
Average: 16958.0, Median: 16986.0, Stddev: 194.7370021336469

As you can see, we observe a 0.3% regression for btrfs, and a 0.9%
regression for ext4. This is a small, barely measurable difference in my
opinion.

For a more realistic scenario, we also tries building the kernel on zram.
Here is the time it takes (in seconds):

With lock consolidation (btrfs):
real
Average: 319.6, Median: 320.0, Stddev: 0.8944271909999159
user
Average: 6894.2, Median: 6895.0, Stddev: 25.528415540334656
sys
Average: 521.4, Median: 522.0, Stddev: 1.51657508881031

Without lock consolidation (btrfs):
real
Average: 319.8, Median: 320.0, Stddev: 0.8366600265340756
user
Average: 6896.6, Median: 6899.0, Stddev: 16.04057355583023
sys
Average: 520.6, Median: 521.0, Stddev: 1.140175425099138

With lock consolidation (ext4):
real
Average: 320.0, Median: 319.0, Stddev: 1.4142135623730951
user
Average: 6896.8, Median: 6878.0, Stddev: 28.621670111997307
sys
Average: 521.2, Median: 521.0, Stddev: 1.7888543819998317

Without lock consolidation (ext4)
real
Average: 319.6, Median: 319.0, Stddev: 0.8944271909999159
user
Average: 6886.2, Median: 6887.0, Stddev: 16.93221781102523
sys
Average: 520.4, Median: 520.0, Stddev: 1.140175425099138

The difference is entirely within the noise of a typical run on zram.
This hardly justifies the complexity of maintaining both the pool lock and
the class lock.  In fact, for writeback, we would need to introduce yet
another lock to prevent data races on the pool's LRU, further complicating
the lock handling logic.  IMHO, it is just better to collapse all of these
into a single pool-level lock.

Link: https://lkml.kernel.org/r/20221128191616.1261026-4-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

zpool: clean out dead code

There is a lot of provision for flexibility that isn't actually needed or
used.  Zswap (the only zpool user) always passes zpool_ops with an .evict
method set.  The backends who reclaim only do so for zswap, so they can
also directly call zpool_ops without indirection or checks.

Finally, there is no need to check the retries parameters and bail with
-EINVAL in the reclaim function, when that's called just a few lines below
with a hard-coded 8.  There is no need to duplicate the evictable and
sleep_mapped attrs from the driver in zpool_ops.

Link: https://lkml.kernel.org/r/20221128191616.1261026-3-nphamcs@gmail.com
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

zswap: fix writeback lock ordering for zsmalloc

Patch series "Implement writeback for zsmalloc", v7.

Unlike other zswap allocators such as zbud or z3fold, zsmalloc currently
lacks the writeback mechanism.  This means that when the zswap pool is
full, it will simply reject further allocations, and the pages will be
written directly to swap.

This series of patches implements writeback for zsmalloc. When the zswap
pool becomes full, zsmalloc will attempt to evict all the compressed
objects in the least-recently used zspages.

This patch (of 6):

zswap's customary lock order is tree->lock before pool->lock, because the
tree->lock protects the entries' refcount, and the free callbacks in the
backends acquire their respective pool locks to dispatch the backing
object.  zsmalloc's map callback takes the pool lock, so zswap must not
grab the tree->lock while a handle is mapped.  This currently only happens
during writeback, which isn't implemented for zsmalloc.  In preparation
for it, move the tree->lock section out of the mapped entry section

Link: https://lkml.kernel.org/r/20221128191616.1261026-1-nphamcs@gmail.com
Link: https://lkml.kernel.org/r/20221128191616.1261026-2-nphamcs@gmail.com
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/madvise: fix madvise_pageout for private file mappings

When MADV_PAGEOUT is called on a private file mapping VMA region, we bail
out early if the process is neither owner nor write capable of the file.
However, this VMA may have both private/shared clean pages and private
dirty pages.  The opportunity of paging out the private dirty pages (Anon
pages) is missed.  Fix this behavior by allowing private file mappings
pageout further and perform the file access check along with PageAnon()
during page walk.

We observe ~10% improvement in zram usage, thus leaving more available
memory on a 4GB RAM system running Android.

[quic_pkondeti@quicinc.com: v2]
Link: https://lkml.kernel.org/r/1669962597-27724-1-git-send-email-quic_pkondeti@quicinc.com
Link: https://lkml.kernel.org/r/1667971116-12900-1-git-send-email-quic_pkondeti@quicinc.com
Signed-off-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Cc: Charan Teja Kalla <quic_charante@quicinc.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/khugepaged: add tracepoint to collapse_file()

"mm_khugepaged_collapse_file" for capturing is_shmem.
Currently, is_shmem is not being captured. Capturing is_shmem is useful
as it can indicate if tmpfs is being used as a backing store instead of
persistent storage. Add the tracepoint in collapse_file() named
"mm_khugepaged_collapse_file" for capturing is_shmem.

[gautammenghani201@gmail.com: swap is_shmem and addr to save space, per Steven Rostedt]
Link: https://lkml.kernel.org/r/20221202201807.182829-1-gautammenghani201@gmail.com
Link: https://lkml.kernel.org/r/20221026052218.148234-1-gautammenghani201@gmail.com
Signed-off-by: Gautam Menghani <gautammenghani201@gmail.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> [tracing]
Cc: David Hildenbrand <david@redhat.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/gup: remove FOLL_MIGRATION

Fortunately, the last user (KSM) is gone, so let's just remove this rather
special code from generic GUP handling -- especially because KSM never
required the PMD handling as KSM only deals with individual base pages.

Link: https://lkml.kernel.org/r/20221021101141.84170-10-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/ksm: convert break_ksm() to use walk_page_range_vma()

FOLL_MIGRATION exists only for the purpose of break_ksm(), and actually,
there is not even the need to wait for the migration to finish, we only
want to know if we're dealing with a KSM page.

Using follow_page() just to identify a KSM page overcomplicates GUP code.
Let's use walk_page_range_vma() instead, because we don't actually care
about the page itself, we only need to know a single property -- no need
to even grab a reference.

So, get rid of follow_page() usage such that we can get rid of
FOLL_MIGRATION now and eventually be able to get rid of follow_page() in
the future.

In my setup (AMD Ryzen 9 3900X), running the KSM selftest to test unmerge
performance on 2 GiB (taskset 0x8 ./ksm_tests -D -s 2048), this results in
a performance degradation of ~2% (old: ~5010 MiB/s, new: ~4900 MiB/s).  I
don't think we particularly care for now.

Interestingly, the benchmark reduction is due to the single callback.
Adding a second callback (e.g., pud_entry()) reduces the benchmark by
another 100-200 MiB/s.

Link: https://lkml.kernel.org/r/20221021101141.84170-9-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/pagewalk: add walk_page_range_vma()

Let's add walk_page_range_vma(), which is similar to walk_page_vma(),
however, is only interested in a subset of the VMA range.

To be used in KSM code to stop using follow_page() next.

Link: https://lkml.kernel.org/r/20221021101141.84170-8-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/ksm: fix KSM COW breaking with userfaultfd-wp via FAULT_FLAG_UNSHARE

Let's stop breaking COW via a fake write fault and let's use
FAULT_FLAG_UNSHARE instead.  This avoids any wrong side effects of the
fake write fault, such as mapping the PTE writable and marking the pte
dirty/softdirty.

Consequently, we will no longer trigger a fake write fault and break COW
without any such side-effects.

Also, this fixes KSM interaction with userfaultfd-wp: when we have a KSM
page that's write-protected by userfaultfd, break_ksm()->handle_mm_fault()
will fail with VM_FAULT_SIGBUS and will simply return in break_ksm() with
0 instead of actually breaking COW.

For now, the KSM unmerge tests can trigger that:
    $ sudo ./ksm_functional_tests
    TAP version 13
    1..3
    # [RUN] test_unmerge
    ok 1 Pages were unmerged
    # [RUN] test_unmerge_discarded
    ok 2 Pages were unmerged
    # [RUN] test_unmerge_uffd_wp
    not ok 3 Pages were unmerged
    Bail out! 1 out of 3 tests failed
    # Planned tests != run tests (2 != 3)
    # Totals: pass:2 fail:1 xfail:0 xpass:0 skip:0 error:0

The warning in dmesg also indicates this wrong handling:
    [  230.096368] FAULT_FLAG_ALLOW_RETRY missing 881
    [  230.100822] CPU: 1 PID: 1643 Comm: ksm-uffd-wp [...]
    [  230.110124] Hardware name: [...]
    [  230.117775] Call Trace:
    [  230.120227]  <TASK>
    [  230.122334]  dump_stack_lvl+0x44/0x5c
    [  230.126010]  handle_userfault.cold+0x14/0x19
    [  230.130281]  ? tlb_finish_mmu+0x65/0x170
    [  230.134207]  ? uffd_wp_range+0x65/0xa0
    [  230.137959]  ? _raw_spin_unlock+0x15/0x30
    [  230.141972]  ? do_wp_page+0x50/0x590
    [  230.145551]  __handle_mm_fault+0x9f5/0xf50
    [  230.149652]  ? mmput+0x1f/0x40
    [  230.152712]  handle_mm_fault+0xb9/0x2a0
    [  230.156550]  break_ksm+0x141/0x180
    [  230.159964]  unmerge_ksm_pages+0x60/0x90
    [  230.163890]  ksm_madvise+0x3c/0xb0
    [  230.167295]  do_madvise.part.0+0x10c/0xeb0
    [  230.171396]  ? do_syscall_64+0x67/0x80
    [  230.175157]  __x64_sys_madvise+0x5a/0x70
    [  230.179082]  do_syscall_64+0x58/0x80
    [  230.182661]  ? do_syscall_64+0x67/0x80
    [  230.186413]  entry_SYSCALL_64_after_hwframe+0x63/0xcd

This is primarily a fix for KSM+userfaultfd-wp, however, the fake write
fault was always questionable.  As this fix is not easy to backport and
it's not very critical, let's not cc stable.

Link: https://lkml.kernel.org/r/20221021101141.84170-6-david@redhat.com
Fixes: 529b930b87d9 ("userfaultfd: wp: hook userfault handler to write protection fault")
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: remove VM_FAULT_WRITE

All users -- GUP and KSM -- are gone, let's just remove it.

Link: https://lkml.kernel.org/r/20221021101141.84170-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/ksm: simplify break_ksm() to not rely on VM_FAULT_WRITE

Now that GUP no longer requires VM_FAULT_WRITE, break_ksm() is the sole
remaining user of VM_FAULT_WRITE.  As we also want to stop triggering a
fake write fault and instead use FAULT_FLAG_UNSHARE -- similar to
GUP-triggered unsharing when taking a R/O pin on a shared anonymous page
(including KSM pages), let's stop relying on VM_FAULT_WRITE.

Let's rework break_ksm() to not rely on the return value of
handle_mm_fault() anymore to figure out whether COW-breaking was
successful.  Simply perform another follow_page() lookup to verify the
result.

While this makes break_ksm() slightly less efficient, we can simplify
handle_mm_fault() a little and easily switch to FAULT_FLAG_UNSHARE without
introducing similar KSM-specific behavior for FAULT_FLAG_UNSHARE.

In my setup (AMD Ryzen 9 3900X), running the KSM selftest to test unmerge
performance on 2 GiB (taskset 0x8 ./ksm_tests -D -s 2048), this results in
a performance degradation of ~4% -- 5% (old: ~5250 MiB/s, new: ~5010
MiB/s).

I don't think that we particularly care about that performance drop when
unmerging.  If it ever turns out to be an actual performance issue, we can
think about a better alternative for FAULT_FLAG_UNSHARE -- let's just keep
it simple for now.

Link: https://lkml.kernel.org/r/20221021101141.84170-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/vm: add test to measure MADV_UNMERGEABLE performance

Let's add a test to measure performance of KSM breaking not triggered via
COW, but triggered by disabling KSM on an area filled with KSM pages via
MADV_UNMERGEABLE.

Link: https://lkml.kernel.org/r/20221021101141.84170-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/pagewalk: don't trigger test_walk() in walk_page_vma()

As Peter points out, the caller passes a single VMA and can just do that
check itself.

And in fact, no existing users rely on test_walk() getting called.  So
let's just remove it and make the implementation slightly more efficient.

Link: https://lkml.kernel.org/r/20221021101141.84170-7-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/vm: add KSM unmerge tests

Patch series "mm/ksm: break_ksm() cleanups and fixes", v2.

This series cleans up and fixes break_ksm().  In summary, we no longer use
fake write faults to break COW but instead FAULT_FLAG_UNSHARE.  Further,
we move away from using follow_page() --- that we can hopefully remove
completely at one point --- and use new walk_page_range_vma() instead.

Fortunately, we can get rid of VM_FAULT_WRITE and FOLL_MIGRATION in common
code now.

Extend the existing ksm tests by an unmerge benchmark, and a some new
unmerge tests.

Also, add a selftest to measure MADV_UNMERGEABLE performance.  In my setup
(AMD Ryzen 9 3900X), running the KSM selftest to test unmerge performance
on 2 GiB (taskset 0x8 ./ksm_tests -D -s 2048), this results in a
performance degradation of ~6% -- 7% (old: ~5250 MiB/s, new: ~4900 MiB/s).
I don't think we particularly care for now, but it's good to be aware of
the implication.

This patch (of 9):

Let's add three unmerge tests (MADV_UNMERGEABLE unmerging all pages in the
range).

test_unmerge(): basic unmerge tests
test_unmerge_discarded(): have some pte_none() entries in the range
test_unmerge_uffd_wp(): protect the merged pages using uffd-wp

ksm_tests.c currently contains a mixture of benchmarks and tests, whereby
each test is carried out by executing the ksm_tests binary with specific
parameters.  Let's add new ksm_functional_tests.c that performs multiple,
smaller functional tests all at once.

Link: https://lkml.kernel.org/r/20221021101141.84170-1-david@redhat.com
Link: https://lkml.kernel.org/r/20221021101141.84170-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/vm: enable running select groups of tests

Our memory management kernel CI testing at Red Hat uses the VM
selftests and we have run into two problems:

First, our LTP tests overlap with the VM selftests.

We want to avoid unhelpful redundancy in our testing practices.

Second, we have observed the current run_vmtests.sh to report overall
failure/ambiguous results in the case that a machine lacks the necessary
hardware to perform one or more of the tests. E.g. ksm tests that
require more than one numa node.

We want to be able to run the vm selftests suitable to particular hardware.

Add the ability to run one or more groups of vm tests via run_vmtests.sh
instead of simply all-or-none in order to solve these problems.

Preserve existing default behavior of running all tests when the script
is invoked with no arguments.

Documentation of test groups is included in the patch as follows:

    # ./run_vmtests.sh [ -h || --help ]

    usage: ./tools/testing/selftests/vm/run_vmtests.sh [ -h | -t "<categories>"]
      -t: specify specific categories to tests to run
      -h: display this message

    The default behavior is to run all tests.

    Alternatively, specific groups tests can be run by passing a string
    to the -t argument containing one or more of the following categories
    separated by spaces:
    - mmap
    tests for mmap(2)
    - gup_test
    tests for gup using gup_test interface
    - userfaultfd
    tests for  userfaultfd(2)
    - compaction
    a test for the patch "Allow compaction of unevictable pages"
    - mlock
    tests for mlock(2)
    - mremap
    tests for mremap(2)
    - hugevm
    tests for very large virtual address space
    - vmalloc
    vmalloc smoke tests
    - hmm
    hmm smoke tests
    - madv_populate
    test memadvise(2) MADV_POPULATE_{READ,WRITE} options
    - memfd_secret
    test memfd_secret(2)
    - process_mrelease
    test process_mrelease(2)
    - ksm
    ksm tests that do not require >=2 NUMA nodes
    - ksm_numa
    ksm tests that require >=2 NUMA nodes
    - pkey
    memory protection key tests
    - soft_dirty
         test soft dirty page bit semantics
    - anon_cow
            test anonymous copy-on-write semantics
    example: ./run_vmtests.sh -t "hmm mmap ksm"

Link: https://lkml.kernel.org/r/20221018231222.1884715-1-jsavitz@redhat.com
Signed-off-by: Joel Savitz <jsavitz@redhat.com>
Cc: Joel Savitz <jsavitz@redhat.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Merge branch 'mm-hotfixes-stable' into mm-stable

memcg: fix possible use-after-free in memcg_write_event_control()

memcg_write_event_control() accesses the dentry->d_name of the specified
control fd to route the write call.  As a cgroup interface file can't be
renamed, it's safe to access d_name as long as the specified file is a
regular cgroup file.  Also, as these cgroup interface files can't be
removed before the directory, it's safe to access the parent too.

Prior to 347c4a874710 ("memcg: remove cgroup_event->cft"), there was a
call to __file_cft() which verified that the specified file is a regular
cgroupfs file before further accesses.  The cftype pointer returned from
__file_cft() was no longer necessary and the commit inadvertently dropped
the file type check with it allowing any file to slip through.  With the
invarients broken, the d_name and parent accesses can now race against
renames and removals of arbitrary files and cause use-after-free's.

Fix the bug by resurrecting the file type check in __file_cft().  Now that
cgroupfs is implemented through kernfs, checking the file operations needs
to go through a layer of indirection.  Instead, let's check the superblock
and dentry type.

Link: https://lkml.kernel.org/r/Y5FRm/cfcKPGzWwl@slm.duckdns.org
Fixes: 347c4a874710 ("memcg: remove cgroup_event->cft")
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jann Horn <jannh@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: <stable@vger.kernel.org> [3.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

MAINTAINERS: update Muchun Song's email

I'm moving to the @linux.dev account.  Map my old addresses and update it
to my new address.

Link: https://lkml.kernel.org/r/20221208115548.85244-1-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/gup: fix gup_pud_range() for dax

For dax pud, pud_huge() returns true on x86. So the function works as long
as hugetlb is configured. However, dax doesn't depend on hugetlb.
Commit 414fd080d125 ("mm/gup: fix gup_pmd_range() for dax") fixed
devmap-backed huge PMDs, but missed devmap-backed huge PUDs. Fix this as
well.

This fixes the below kernel panic:

general protection fault, probably for non-canonical address 0x69e7c000cc478: 0000 [#1] SMP
< snip >
Call Trace:
<TASK>
get_user_pages_fast+0x1f/0x40
iov_iter_get_pages+0xc6/0x3b0
? mempool_alloc+0x5d/0x170
bio_iov_iter_get_pages+0x82/0x4e0
? bvec_alloc+0x91/0xc0
? bio_alloc_bioset+0x19a/0x2a0
blkdev_direct_IO+0x282/0x480
? __io_complete_rw_common+0xc0/0xc0
? filemap_range_has_page+0x82/0xc0
generic_file_direct_write+0x9d/0x1a0
? inode_update_time+0x24/0x30
__generic_file_write_iter+0xbd/0x1e0
blkdev_write_iter+0xb4/0x150
? io_import_iovec+0x8d/0x340
io_write+0xf9/0x300
io_issue_sqe+0x3c3/0x1d30
? sysvec_reschedule_ipi+0x6c/0x80
__io_queue_sqe+0x33/0x240
? fget+0x76/0xa0
io_submit_sqes+0xe6a/0x18d0
? __fget_light+0xd1/0x100
__x64_sys_io_uring_enter+0x199/0x880
? __context_tracking_enter+0x1f/0x70
? irqentry_exit_to_user_mode+0x24/0x30
? irqentry_exit+0x1d/0x30
? __context_tracking_exit+0xe/0x70
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x61/0xcb
RIP: 0033:0x7fc97c11a7be
< snip >
</TASK>
---[ end trace 48b2e0e67debcaeb ]---
RIP: 0010:internal_get_user_pages_fast+0x340/0x990
< snip >
Kernel panic - not syncing: Fatal exception
Kernel Offset: disabled

Link: https://lkml.kernel.org/r/1670392853-28252-1-git-send-email-ssengar@linux.microsoft.com
Fixes: 414fd080d125 ("mm/gup: fix gup_pmd_range() for dax")
Signed-off-by: John Starks <jostarks@microsoft.com>
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mmap: fix do_brk_flags() modifying obviously incorrect VMAs

Add more sanity checks to the VMA that do_brk_flags() will expand.  Ensure
the VMA matches basic merge requirements within the function before
calling can_vma_merge_after().

Drop the duplicate checks from vm_brk_flags() since they will be enforced
later.

The old code would expand file VMAs on brk(), which is functionally
wrong and also dangerous in terms of locking because the brk() path
isn't designed for file VMAs and therefore doesn't lock the file
mapping.  Checking can_vma_merge_after() ensures that new anonymous
VMAs can't be merged into file VMAs.

See https://lore.kernel.org/linux-mm/CAG48ez1tJZTOjS_FjRZhvtDA-STFmdw8PEizPDwMGFd_ui0Nrw@mail.gmail.com/

Link: https://lkml.kernel.org/r/20221205192304.1957418-1-Liam.Howlett@oracle.com
Fixes: 2e7ce7d354f2 ("mm/mmap: change do_brk_flags() to expand existing VMA and add do_brk_munmap()")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Suggested-by: Jann Horn <jannh@google.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/swap: fix SWP_PFN_BITS with CONFIG_PHYS_ADDR_T_64BIT on 32bit

We use "unsigned long" to store a PFN in the kernel and phys_addr_t to
store a physical address.

On a 64bit system, both are 64bit wide.  However, on a 32bit system, the
latter might be 64bit wide.  This is, for example, the case on x86 with
PAE: phys_addr_t and PTEs are 64bit wide, while "unsigned long" only spans
32bit.

The current definition of SWP_PFN_BITS without MAX_PHYSMEM_BITS misses
that case, and assumes that the maximum PFN is limited by an 32bit
phys_addr_t.  This implies, that SWP_PFN_BITS will currently only be able
to cover 4 GiB - 1 on any 32bit system with 4k page size, which is wrong.

Let's rely on the number of bits in phys_addr_t instead, but make sure to
not exceed the maximum swap offset, to not make the BUILD_BUG_ON() in
is_pfn_swap_entry() unhappy.  Note that swp_entry_t is effectively an
unsigned long and the maximum swap offset shares that value with the swap
type.

For example, on an 8 GiB x86 PAE system with a kernel config based on
Debian 11.5 (-> CONFIG_FLATMEM=y, CONFIG_X86_PAE=y), we will currently
fail removing migration entries (remove_migration_ptes()), because
mm/page_vma_mapped.c:check_pte() will fail to identify a PFN match as
swp_offset_pfn() wrongly masks off PFN bits.  For example,
split_huge_page_to_list()->...->remap_page() will leave migration entries
in place and continue to unlock the page.

Later, when we stumble over these migration entries (e.g., via
/proc/self/pagemap), pfn_swap_entry_to_page() will BUG_ON() because these
migration entries shouldn't exist anymore and the page was unlocked.

[   33.067591] kernel BUG at include/linux/swapops.h:497!
[   33.067597] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[   33.067602] CPU: 3 PID: 742 Comm: cow Tainted: G            E      6.1.0-rc8+ #16
[   33.067605] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014
[   33.067606] EIP: pagemap_pmd_range+0x644/0x650
[   33.067612] Code: 00 00 00 00 66 90 89 ce b9 00 f0 ff ff e9 ff fb ff ff 89 d8 31 db e8 48 c6 52 00 e9 23 fb ff ff e8 61 83 56 00 e9 b6 fe ff ff <0f> 0b bf 00 f0 ff ff e9 38 fa ff ff 3e 8d 74 26 00 55 89 e5 57 31
[   33.067615] EAX: ee394000 EBX: 00000002 ECX: ee394000 EDX: 00000000
[   33.067617] ESI: c1b0ded4 EDI: 00024a00 EBP: c1b0ddb4 ESP: c1b0dd68
[   33.067619] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 EFLAGS: 00010246
[   33.067624] CR0: 80050033 CR2: b7a00000 CR3: 01bbbd20 CR4: 00350ef0
[   33.067625] Call Trace:
[   33.067628]  ? madvise_free_pte_range+0x720/0x720
[   33.067632]  ? smaps_pte_range+0x4b0/0x4b0
[   33.067634]  walk_pgd_range+0x325/0x720
[   33.067637]  ? mt_find+0x1d6/0x3a0
[   33.067641]  ? mt_find+0x1d6/0x3a0
[   33.067643]  __walk_page_range+0x164/0x170
[   33.067646]  walk_page_range+0xf9/0x170
[   33.067648]  ? __kmem_cache_alloc_node+0x2a8/0x340
[   33.067653]  pagemap_read+0x124/0x280
[   33.067658]  ? default_llseek+0x101/0x160
[   33.067662]  ? smaps_account+0x1d0/0x1d0
[   33.067664]  vfs_read+0x90/0x290
[   33.067667]  ? do_madvise.part.0+0x24b/0x390
[   33.067669]  ? debug_smp_processor_id+0x12/0x20
[   33.067673]  ksys_pread64+0x58/0x90
[   33.067675]  __ia32_sys_ia32_pread64+0x1b/0x20
[   33.067680]  __do_fast_syscall_32+0x4c/0xc0
[   33.067683]  do_fast_syscall_32+0x29/0x60
[   33.067686]  do_SYSENTER_32+0x15/0x20
[   33.067689]  entry_SYSENTER_32+0x98/0xf1

Decrease the indentation level of SWP_PFN_BITS and SWP_PFN_MASK to keep it
readable and consistent.

[david@redhat.com: rely on sizeof(phys_addr_t) and min_t() instead]
Link: https://lkml.kernel.org/r/20221206105737.69478-1-david@redhat.com
[david@redhat.com: use "int" for comparison, as we're only comparing numbers < 64]
Link: https://lkml.kernel.org/r/1f157500-2676-7cef-a84e-9224ed64e540@redhat.com
Link: https://lkml.kernel.org/r/20221205150857.167583-1-david@redhat.com
Fixes: 0d206b5d2e0d ("mm/swap: add swp_offset_pfn() to fetch PFN from swap entry")
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

tmpfs: fix data loss from failed fallocate

Fix tmpfs data loss when the fallocate system call is interrupted by a
signal, or fails for some other reason.  The partial folio handling in
shmem_undo_range() forgot to consider this unfalloc case, and was liable
to erase or truncate out data which had already been committed earlier.

It turns out that none of the partial folio handling there is appropriate
for the unfalloc case, which just wants to proceed to removal of whole
folios: which find_get_entries() provides, even when partially covered.

Original patch by Rui Wang.

Link: https://lore.kernel.org/linux-mm/33b85d82.7764.1842e9ab207.Coremail.chenguoqic@163.com/
Link: https://lkml.kernel.org/r/a5dac112-cf4b-7af-a33-f386e347fd38@google.com
Fixes: b9a8a4195c7d ("truncate,shmem: Handle truncates that split large folios")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-by: Guoqi Chen <chenguoqic@163.com>
Link: https://lore.kernel.org/all/20221101032248.819360-1-kernel@hev.cc/
Cc: Rui Wang <kernel@hev.cc>
Cc: Huacai Chen <chenhuacai@loongson.cn>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: <stable@vger.kernel.org> [5.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

kselftests: cgroup: update kmem test precision tolerance

1813e51eece0 ("memcg: increase MEMCG_CHARGE_BATCH to 64") has changed
the batch size while this test case has been left behind. This has led
to a test failure reported by test bot:
not ok 2 selftests: cgroup: test_kmem # exit=1

Update the tolerance for the pcp charges to reflect the
MEMCG_CHARGE_BATCH change to fix this.

[akpm@linux-foundation.org: update comments, per Roman]
Link: https://lkml.kernel.org/r/Y4m8Unt6FhWKC6IH@dhcp22.suse.cz
Fixes: 1813e51eece0a ("memcg: increase MEMCG_CHARGE_BATCH to 64")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: kernel test robot <yujie.liu@intel.com>
Link: https://lore.kernel.org/oe-lkp/202212010958.c1053bd3-yujie.liu@intel.com
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Tested-by: Yujie Liu <yujie.liu@intel.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Michal Koutný" <mkoutny@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: do not BUG_ON missing brk mapping, because userspace can unmap it

The following program will trigger the BUG_ON that this patch removes,
because the user can munmap() mm->brk:

  #include <sys/syscall.h>
  #include <sys/mman.h>
  #include <assert.h>
  #include <unistd.h>

  static void *brk_now(void)
  {
    return (void *)syscall(SYS_brk, 0);
  }

  static void brk_set(void *b)
  {
    assert(syscall(SYS_brk, b) != -1);
  }

  int main(int argc, char *argv[])
  {
    void *b = brk_now();
    brk_set(b + 4096);
    assert(munmap(b - 4096, 4096 * 2) == 0);
    brk_set(b);
    return 0;
  }

Compile that with musl, since glibc actually uses brk(), and then
execute it, and it'll hit this splat:

  kernel BUG at mm/mmap.c:229!
  invalid opcode: 0000 [#1] PREEMPT SMP
  CPU: 12 PID: 1379 Comm: a.out Tainted: G S   U             6.1.0-rc7+ #419
  RIP: 0010:__do_sys_brk+0x2fc/0x340
  Code: 00 00 4c 89 ef e8 04 d3 fe ff eb 9a be 01 00 00 00 4c 89 ff e8 35 e0 fe ff e9 6e ff ff ff 4d 89 a7 20>
  RSP: 0018:ffff888140bc7eb0 EFLAGS: 00010246
  RAX: 0000000000000000 RBX: 00000000007e7000 RCX: ffff8881020fe000
  RDX: ffff8881020fe001 RSI: ffff8881955c9b00 RDI: ffff8881955c9b08
  RBP: 0000000000000000 R08: ffff8881955c9b00 R09: 00007ffc77844000
  R10: 0000000000000000 R11: 0000000000000001 R12: 00000000007e8000
  R13: 00000000007e8000 R14: 00000000007e7000 R15: ffff8881020fe000
  FS:  0000000000604298(0000) GS:ffff88901f700000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000603fe0 CR3: 000000015ba9a005 CR4: 0000000000770ee0
  PKRU: 55555554
  Call Trace:
   <TASK>
   do_syscall_64+0x2b/0x50
   entry_SYSCALL_64_after_hwframe+0x46/0xb0
  RIP: 0033:0x400678
  Code: 10 4c 8d 41 08 4c 89 44 24 10 4c 8b 01 8b 4c 24 08 83 f9 2f 77 0a 4c 8d 4c 24 20 4c 01 c9 eb 05 48 8b>
  RSP: 002b:00007ffc77863890 EFLAGS: 00000212 ORIG_RAX: 000000000000000c
  RAX: ffffffffffffffda RBX: 000000000040031b RCX: 0000000000400678
  RDX: 00000000004006a1 RSI: 00000000007e6000 RDI: 00000000007e7000
  RBP: 00007ffc77863900 R08: 0000000000000000 R09: 00000000007e6000
  R10: 00007ffc77863930 R11: 0000000000000212 R12: 00007ffc77863978
  R13: 00007ffc77863988 R14: 0000000000000000 R15: 0000000000000000
   </TASK>

Instead, just return the old brk value if the original mapping has been
removed.

[akpm@linux-foundation.org: fix changelog, per Liam]
Link: https://lkml.kernel.org/r/20221202162724.2009-1-Jason@zx2c4.com
Fixes: 2e7ce7d354f2 ("mm/mmap: change do_brk_flags() to expand existing VMA and add do_brk_munmap()")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mailmap: update Matti Vaittinen's email address

The email backend used by ROHM keeps labeling patches as spam.  This can
result in missing the patches.

Switch my mail address from a company mail to a personal one.

Link: https://lkml.kernel.org/r/8f4498b66fedcbded37b3b87e0c516e659f8f583.1669912977.git.mazziesaccount@gmail.com
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Anup Patel <anup@brainfault.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Atish Patra <atishp@atishpatra.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Ben Widawsky <bwidawsk@kernel.org>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Qais Yousef <qyousef@layalina.io>
Cc: Vasily Averin <vasily.averin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/memory-failure.c: cleanup in unpoison_memory

If freeit is true, the value of ret must be zero, there is no need to
check the value of freeit after label unlock_mutex.

We can drop variable freeit to do this cleanup.

Link: https://lkml.kernel.org/r/20221125065444.3462681-1-mawupeng1@huawei.com
Signed-off-by: Ma Wupeng <mawupeng1@huawei.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/thp: re-apply mkdirty for small pages after split

We used to have 624a2c94f5b7 (Partly revert "mm/thp: carry over dirty bit
when thp splits on pmd") fixing the regression reported here by Anatoly
Pugachev on sparc64:

https://lore.kernel.org/r/20221021160603.GA23307@u164.east.ru

Where we temporarily ignored the dirty bit for small pages.

Then, Hev also reported similar issue on loongarch:

(the original mail was private, but Anatoly copied the list here)

https://lore.kernel.org/r/CADxRZqxqb7f_WhMh=jweZP+ynf_JwGd-0VwbYgp4P+T0-AXosw@mail.gmail.com

Hev pointed out that the issue is having HW write bit set within the
pte_mkdirty() so the split pte can be written after split even if e.g.
they were shared by more than one processes, causing data corrupt.

Hev also tried to explain why loongarch set HW write bit in mkdirty:

https://lore.kernel.org/r/CAHirt9itKO_K_HPboXh5AyJtt16Zf0cD73PtHvM=na39u_ztxA@mail.gmail.com

One way to fix it is as what Huacai proposed here for loongarch (then we
can re-apply the dirty bit in thp split):

https://lore.kernel.org/r/20221117042532.4064448-1-chenhuacai@loongson.cnn

We may need similar thing for sparc64, though.

For now since we've found the root cause of the dirty bit issue the
simpler solution (which won't lose the dirty bit for small) that will work
for both is we wr-protect after pte_mkdirty(), so the HW write bit can be
persistent after thp split.

Add a comment for wrprotect, so we will not mess up the ordering later.

With 624a2c94f5b7 (Partly revert "mm/thp: carry over dirty bit when thp
splits on pmd") this is not a fix anymore, but just brings back the dirty
bit for thp split safely, so we re-apply the optimization but in safe way.

Provide a Tested-by credit to Hev too (not the exact same patch but the
same outcome) for loongarch.

Link: https://lkml.kernel.org/r/20221125185857.3110155-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Tested-by: Hev <r@hev.cc> # loongarch
Cc: Anatoly Pugachev <matorola@gmail.com>
Cc: Raghavendra K T <raghavendra.kt@amd.com>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: vmscan: use sysfs_emit() to instead of scnprintf()

Replace open-coded snprintf() with sysfs_emit() to simplify the code.

Link: https://lkml.kernel.org/r/202211241929015476424@zte.com.cn
Signed-off-by: Xu Panda <xu.panda@zte.com.cn>
Signed-off-by: Yang Yang <yang.yang29@zte.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

s390/mm: use pmd_pgtable_page() helper in __gmap_segment_gaddr()

In __gmap_segment_gaddr() pmd level page table page is being extracted
from the pmd pointer, similar to pmd_pgtable_page() implementation.  This
reduces some redundancy by directly using pmd_pgtable_page() instead,
though first making it available.

Link: https://lkml.kernel.org/r/20221125034502.1559986-1-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/thp: rename pmd_to_page() as pmd_pgtable_page()

Current pmd_to_page(), which derives the page table page containing the
pmd address has a very misleading name.  The problem being, it sounds
similar to pmd_page() which derives page embedded in a given pmd entry
either for next level page or a mapped huge page.  Rename it as
pmd_pgtable_page() instead.

Link: https://lkml.kernel.org/r/20221124131641.1523772-1-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

zswap: do not allocate from atomic pool

zswap_frontswap_load() should be called from preemptible context (we even
call mutex_lock() there) and it does not look like we need to do
GFP_ATOMIC allocaion for temp buffer.  The same applies to
zswap_writeback_entry().

Use GFP_KERNEL for temporary buffer allocation in both cases.

Link: https://lkml.kernel.org/r/Y3xCTr6ikbtcUr/y@google.com
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

documentation/mm: update pmd_present() in arch_pgtable_helpers.rst

Although pmd_present() might seem to indicate a valid and mapped pmd
entry, in reality it returns true when pmd_page() points to a valid page
in memory , regardless whether the pmd entry is mapped or not.  Andrea
Arcangeli had earlier explained [1] the required semantics for
pmd_present().  This just updates the documentation for pmd_present() as
required.

[1] https://lore.kernel.org/lkml/20181017020930.GN30832@redhat.com/

Link: https://lkml.kernel.org/r/20221123051319.1312582-1-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm, compaction: fix fast_isolate_around() to stay within boundaries

Depending on the memory configuration, isolate_freepages_block() may scan
pages out of the target range and causes panic.

Panic can occur on systems with multiple zones in a single pageblock.

The reason it is rare is that it only happens in special
configurations.  Depending on how many similar systems there are, it
may be a good idea to fix this problem for older kernels as well.

The problem is that pfn as argument of fast_isolate_around() could be out
of the target range.  Therefore we should consider the case where pfn <
start_pfn, and also the case where end_pfn < pfn.

This problem should have been addressd by the commit 6e2b7044c199 ("mm,
compaction: make fast_isolate_freepages() stay within zone") but there was
an oversight.

 Case1: pfn < start_pfn

  <at memory compaction for node Y>
  |  node X's zone  | node Y's zone
  +-----------------+------------------------------...
   pageblock    ^   ^     ^
  +-----------+-----------+-----------+-----------+...
                ^   ^     ^
                ^   ^      end_pfn
                ^    start_pfn = cc->zone->zone_start_pfn
                 pfn
                <---------> scanned range by "Scan After"

 Case2: end_pfn < pfn

  <at memory compaction for node X>
  |  node X's zone  | node Y's zone
  +-----------------+------------------------------...
   pageblock  ^     ^   ^
  +-----------+-----------+-----------+-----------+...
              ^     ^   ^
              ^     ^    pfn
              ^      end_pfn
               start_pfn
              <---------> scanned range by "Scan Before"

It seems that there is no good reason to skip nr_isolated pages just after
given pfn.  So let perform simple scan from start to end instead of
dividing the scan into "Before" and "After".

Link: https://lkml.kernel.org/r/20221026112438.236336-1-a.naribayashi@fujitsu.com
Fixes: 6e2b7044c199 ("mm, compaction: make fast_isolate_freepages() stay within zone").
Signed-off-by: NARIBAYASHI Akira <a.naribayashi@fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: document /sys/class/bdi/<bdi>/min_ratio_fine knob

This documents the new /sys/class/bdi/<bdi>/max_ratio_fine knob.

[akpm@linux-foundation.org: fix htmldocs warnings]
Link: https://lkml.kernel.org/r/20221119005215.3052436-21-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: add /sys/class/bdi/<bdi>/min_ratio_fine knob

This adds the min_ratio_fine knob. The knob specifies the values not
based on 1 of 100, but instead 1 per million.

Link: https://lkml.kernel.org/r/20221119005215.3052436-20-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: add bdi_set_min_ratio_no_scale() function

This introduces bdi_set_min_ratio_no_scale(). It uses the max
granularity for the ratio. This function by the new sysfs knob
min_ratio_fine.

Link: https://lkml.kernel.org/r/20221119005215.3052436-19-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: document /sys/class/bdi/<bdi>/max_ratio_fine knob

This documents the new /sys/class/bdi/<bdi>/max_ratio_fine knob.

[akpm@linux-foundation.org: fix htmldocs warnings]
Link: https://lkml.kernel.org/r/20221119005215.3052436-18-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: add /sys/class/bdi/<bdi>/max_ratio_fine knob

This adds the max_ratio_fine knob. The knob specifies the values not
based on 1 of 100, but instead 1 per million.

Link: https://lkml.kernel.org/r/20221119005215.3052436-17-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: add bdi_set_max_ratio_no_scale() function

This introduces bdi_set_max_ratio_no_scale(). It uses the max
granularity for the ratio. This function by the new sysfs knob
max_ratio_fine.

Link: https://lkml.kernel.org/r/20221119005215.3052436-16-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: document /sys/class/bdi/<bdi>/min_bytes knob

This documents the new /sys/class/bdi/<bdi>/min_bytes knob.

[akpm@linux-foundation.org: fix htmldocs warnings]
Link: https://lkml.kernel.org/r/20221119005215.3052436-15-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: add /sys/class/bdi/<bdi>/min_bytes knob

bdi has two existing knobs to limit the amount of dirty memory:
min_ratio and max_ratio. However the granularity of the knobs is limited
and often it is more convenient to specify limits in terms of bytes.
This change adds the min_bytes knob.

It does not store the min_bytes value, instead it converts the max_bytes
value to a ratio. The value is therefore more an approximation than an
absolute value.

It also maintains the sum over all the bdi min_ratio values stored in
the variable bdi_min_ratio.

Link: https://lkml.kernel.org/r/20221119005215.3052436-14-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: add bdi_set_min_bytes() function

This introduces the bdi_set_min_bytes() function. The min_bytes function
does not store the min_bytes value. Instead it converts the min_bytes
value into the corresponding ratio value.

Link: https://lkml.kernel.org/r/20221119005215.3052436-13-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: split off __bdi_set_min_ratio() function

This splits off the __bdi_set_min_ratio() function from the
bdi_set_min_ratio() function. The __bdi_set_min_ratio() function will
also be called from the bdi_set_min_bytes() function, which will be
introduced in the next patch.

Link: https://lkml.kernel.org/r/20221119005215.3052436-12-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: add bdi_get_min_bytes() function

This adds a function to return the specified value for min_bytes. It
converts the stored min_ratio of the bdi to the corresponding bytes
value. This is an approximation as it is based on the value that is
returned by global_dirty_limits(), which can change. The returned
value can be different than the value when the min_bytes value was set.

Link: https://lkml.kernel.org/r/20221119005215.3052436-11-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: document /sys/class/bdi/<bdi>/max_bytes knob

This documents the new /sys/class/bdi/<bdi>/max_bytes knob.

Link: https://lkml.kernel.org/r/20221119005215.3052436-10-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: add knob /sys/class/bdi/<bdi>/max_bytes

This adds the new knob max_bytes to specify a dirty memory limit for the
corresponding bdi. The specified bytes value is converted to a ratio.

Link: https://lkml.kernel.org/r/20221119005215.3052436-9-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: add bdi_set_max_bytes() function

This introduces the bdi_set_max_bytes() function. The max_bytes function
does not store the max_bytes value. Instead it converts the max_bytes
value into the corresponding ratio value.

Link: https://lkml.kernel.org/r/20221119005215.3052436-8-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: split off __bdi_set_max_ratio() function

This splits off __bdi_set_max_ratio() from bdi_set_max_ratio().
__bdi_set_max_ratio() will also be called from bdi_set_max_bytes(),
which will be introduced in the next patch.

Link: https://lkml.kernel.org/r/20221119005215.3052436-7-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: add bdi_get_max_bytes() function

This adds a function to return the specified value for max_bytes. It
converts the stored max_ratio of the bdi to the corresponding bytes
value. It introduces the bdi_get_bytes helper function to do the
conversion. This is an approximation as it is based on the value that is
returned by global_dirty_limits(), which can change. The helper function
will also be used by the min_bytes bdi knob.

Link: https://lkml.kernel.org/r/20221119005215.3052436-6-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: use part per 1000000 for bdi ratios

To get finer granularity for ratio calculations use part per million
instead of percentiles. This is especially important if we want to
automatically convert byte values to ratios. Otherwise the values that
are actually used can be quite different. This is also important for
machines with more main memory (1% of 256GB is already 2.5GB).

Link: https://lkml.kernel.org/r/20221119005215.3052436-5-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: document /sys/class/bdi/<bdi>/strict_limit knob

This documents the new /sys/class/bdi/<bdi>/strict_limit knob.

Link: https://lkml.kernel.org/r/20221119005215.3052436-4-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: add knob /sys/class/bdi/<bdi>/strict_limit

Add a new knob to /sys/class/bdi/<bdi>/strict_limit. This new knob
allows to set/unset the flag BDI_CAP_STRICTLIMIT in the bdi
capabilities.

Link: https://lkml.kernel.org/r/20221119005215.3052436-3-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: add bdi_set_strict_limit() function

Patch series "mm/block: add bdi sysfs knobs", v4.

At meta network block devices (nbd) are used to implement remote block
storage.  In testing and during production it has been observed that these
network block devices can consume a huge portion of the dirty writeback
cache and writeback can take a considerable time.

To be able to give stricter limits, I'm proposing the following changes:

1) introduce strictlimit knob

  Currently the max_ratio knob exists to limit the dirty_memory. However
  this knob only applies once (dirty_ratio + dirty_background_ratio) / 2
  has been reached.
  With the BDI_CAP_STRICTLIMIT flag, the max_ratio can be applied without
  reaching that limit. This change exposes that knob.

  This knob can also be useful for NFS, fuse filesystems and USB devices.

2) Use part of 1000000 internal calculation

  The max_ratio is based on percentage. With the current machine sizes
  percentage values can be very high (1% of a 256GB main memory is already
  2.5GB). This change uses part of 1000000 instead of percentages for the
  internal calculations.

3) Introduce two new sysfs knobs: min_bytes and max_bytes.

  Currently all calculations are based on ratio, but for a user it often
  more convenient to specify a limit in bytes. The new knobs will not
  store bytes values, instead they will translate the byte value to a
  corresponding ratio. As the internal values are now part of 1000, the
  ratio is closer to the specified value. However the value should be more
  seen as an approximation as it can fluctuate over time.

3) Introduce two new sysfs knobs: min_ratio_fine and max_ratio_fine.

  The granularity for the existing sysfs bdi knobs min_ratio and max_ratio
  is based on percentage values. The new sysfs bdi knobs min_ratio_fine
  and max_ratio_fine allow to specify the ratio as part of 1 million.

This patch (of 20):

This adds the bdi_set_strict_limit function to be able to set/unset the
BDI_CAP_STRICTLIMIT flag.

Link: https://lkml.kernel.org/r/20221119005215.3052436-1-shr@devkernel.io
Link: https://lkml.kernel.org/r/20221119005215.3052436-2-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Chris Mason <clm@meta.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

maple_tree: allow TEST_MAPLE_TREE only when DEBUG_KERNEL is set

Prevent a kconfig warning that is caused by TEST_MAPLE_TREE by adding a
"depends on" clause for TEST_MAPLE_TREE since 'select' does not follow any
kconfig dependencies.

WARNING: unmet direct dependencies detected for DEBUG_MAPLE_TREE
  Depends on [n]: DEBUG_KERNEL [=n]
  Selected by [y]:
  - TEST_MAPLE_TREE [=y] && RUNTIME_TESTING_MENU [=y]

Link: https://lkml.kernel.org/r/20221119055117.14094-1-rdunlap@infradead.org
Fixes: 120b116208a0 ("maple_tree: reorganize testing to restore module testing")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Revert "kmsan: unpoison @tlb in arch_tlb_gather_mmu()"

This reverts commit ac801e7e252c5588325e3c983c7d4167fc68c024.

The patch in question was picked to -mm from the KMSAN v6 patch series
(https://lore.kernel.org/linux-mm/20220905122452.2258262-1-glider@google.com/)
and sneaked into mainline despite its removal from the v7 series
(https://lore.kernel.org/linux-mm/20220915150417.722975-1-glider@google.com/)

Currently KMSAN does not warn about origin chains hitting the maximum
depth, so keeping @tlb poisoned won't result in any inconveniences.

Link: https://lkml.kernel.org/r/20221110113541.1844156-1-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

folio-compat: remove try_to_release_page()

There are no more callers of try_to_release_page(), so remove it.  This
saves 85 bytes of kernel text.

Link: https://lkml.kernel.org/r/20221118073055.55694-5-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

memory-failure: convert truncate_error_page() to use folio

Replace try_to_release_page() with filemap_release_folio().  This change
is in preparation for the removal of the try_to_release_page() wrapper.

Link: https://lkml.kernel.org/r/20221118073055.55694-4-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

khugepage: replace try_to_release_page() with filemap_release_folio()

Replace some calls with their folio equivalents.  This change removes 4
calls to compound_head() and is in preparation for the removal of the
try_to_release_page() wrapper.

Link: https://lkml.kernel.org/r/20221118073055.55694-3-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

ext4: convert move_extent_per_page() to use folios

Patch series "Removing the try_to_release_page() wrapper", v3.

This patchset replaces the remaining calls of try_to_release_page() with
the folio equivalent: filemap_release_folio().  This allows us to remove
the wrapper.

This patch (of 4):

Convert move_extent_per_page() to use folios.  This change removes 5 calls
to compound_head() and is in preparation for the removal of the
try_to_release_page() wrapper.

Link: https://lkml.kernel.org/r/20221118073055.55694-1-vishal.moola@gmail.com
Link: https://lkml.kernel.org/r/20221118073055.55694-2-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/page_alloc: simplify locking during free_unref_page_list

While freeing a large list, the zone lock will be released and reacquired
to avoid long hold times since commit c24ad77d962c ("mm/page_alloc.c:
avoid excessive IRQ disabled times in free_unref_page_list()").  As
suggested by Vlastimil Babka, the lockrelease/reacquire logic can be
simplified by reusing the logic that acquires a different lock when
changing zones.

Link: https://lkml.kernel.org/r/20221122131229.5263-3-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/page_alloc: leave IRQs enabled for per-cpu page allocations

The pcp_spin_lock_irqsave protecting the PCP lists is IRQ-safe as a task
allocating from the PCP must not re-enter the allocator from IRQ context.
In each instance where IRQ-reentrancy is possible, the lock is acquired
using pcp_spin_trylock_irqsave() even though IRQs are disabled and
re-entrancy is impossible.

Demote the lock to pcp_spin_lock avoids an IRQ disable/enable in the
common case at the cost of some IRQ allocations taking a slower path.  If
the PCP lists need to be refilled, the zone lock still needs to disable
IRQs but that will only happen on PCP refill and drain.  If an IRQ is
raised when a PCP allocation is in progress, the trylock will fail and
fallback to using the buddy lists directly.  Note that this may not be a
universal win if an interrupt-intensive workload also allocates heavily
from interrupt context and contends heavily on the zone->lock as a result.

[mgorman@techsingularity.net: migratetype might be wrong if a PCP was locked]
Link: https://lkml.kernel.org/r/20221122131229.5263-2-mgorman@techsingularity.net
[yuzhao@google.com: reported lockdep issue on IO completion from softirq]
[hughd@google.com: fix list corruption, lock improvements, micro-optimsations]
Link: https://lkml.kernel.org/r/20221118101714.19590-3-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/page_alloc: always remove pages from temporary list

Patch series "Leave IRQs enabled for per-cpu page allocations", v3.

This patch (of 2):

free_unref_page_list() has neglected to remove pages properly from the
list of pages to free since forever.  It works by coincidence because
list_add happened to do the right thing adding the pages to just the PCP
lists.  However, a later patch added pages to either the PCP list or the
zone list but only properly deleted the page from the list in one path
leading to list corruption and a subsequent failure.  As a preparation
patch, always delete the pages from one list properly before adding to
another.  On its own, this fixes nothing although it adds a fractional
amount of overhead but is critical to the next patch.

Link: https://lkml.kernel.org/r/20221118101714.19590-1-mgorman@techsingularity.net
Link: https://lkml.kernel.org/r/20221118101714.19590-2-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/vm: use memfd for hugepage-mmap test

This test was overlooked with a hard-coded mntpoint path in test when
we're removing the hugetlb mntpoint in commit 0796c7b8be84.  Fix it up so
the test can keep running.

Link: https://lkml.kernel.org/r/Y3aojfUC2nSwbCzB@x1n
Fixes: 0796c7b8be84 ("selftests/vm: drop mnt point for hugetlb in run_vmtests.sh")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Joel Savitz <jsavitz@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

zram: remove unused stats fields

We don't show num_reads and num_writes since we removed corresponding
sysfs nodes in 2017.  Block layer stats are exposed via
/sys/block/zramX/stat file.

However, we still increment those atomic vars and store them in zram
stats.  Remove leftovers.

Link: https://lkml.kernel.org/r/20221117141326.1105181-1-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/migrate.c: stop using 0 as NULL pointer

mm/migrate.c:1198:24: warning: Using plain integer as NULL pointer

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3080
Link: https://lkml.kernel.org/r/20221116012345.84870-1-yang.lee@linux.alibaba.com
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: multi-gen LRU: remove NULL checks on NODE_DATA()

NODE_DATA() is preallocated for all possible nodes after commit
09f49dca570a ("mm: handle uninitialized numa nodes gracefully").  Checking
its return value against NULL is now unnecessary.

Link: https://lkml.kernel.org/r/20221116013808.3995280-2-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/gup: disallow FOLL_FORCE|FOLL_WRITE on hugetlb mappings

hugetlb does not support fake write-faults (write faults without write
permissions).  However, we are currently able to trigger a
FAULT_FLAG_WRITE fault on a VMA without VM_WRITE.

If we'd ever want to support FOLL_FORCE|FOLL_WRITE, we'd have to teach
hugetlb to:

(1) Leave the page mapped R/O after the fake write-fault, like
    maybe_mkwrite() does.
(2) Allow writing to an exclusive anon page that's mapped R/O when
    FOLL_FORCE is set, like can_follow_write_pte(). E.g.,
    __follow_hugetlb_must_fault() needs adjustment.

For now, it's not clear if that added complexity is really required.
History tolds us that FOLL_FORCE is dangerous and that we better limit its
use to a bare minimum.

--------------------------------------------------------------------------
  #include <stdio.h>
  #include <stdlib.h>
  #include <fcntl.h>
  #include <unistd.h>
  #include <errno.h>
  #include <stdint.h>
  #include <sys/mman.h>
  #include <linux/mman.h>

  int main(int argc, char **argv)
  {
          char *map;
          int mem_fd;

          map = mmap(NULL, 2 * 1024 * 1024u, PROT_READ,
                     MAP_PRIVATE|MAP_ANON|MAP_HUGETLB|MAP_HUGE_2MB, -1, 0);
          if (map == MAP_FAILED) {
                  fprintf(stderr, "mmap() failed: %d\n", errno);
                  return 1;
          }

          mem_fd = open("/proc/self/mem", O_RDWR);
          if (mem_fd < 0) {
                  fprintf(stderr, "open(/proc/self/mem) failed: %d\n", errno);
                  return 1;
          }

          if (pwrite(mem_fd, "0", 1, (uintptr_t) map) == 1) {
                  fprintf(stderr, "write() succeeded, which is unexpected\n");
                  return 1;
          }

          printf("write() failed as expected: %d\n", errno);
          return 0;
  }
--------------------------------------------------------------------------

Fortunately, we have a sanity check in hugetlb_wp() in place ever since
commit 1d8d14641fd9 ("mm/hugetlb: support write-faults in shared
mappings"), that bails out instead of silently mapping a page writable in
a !PROT_WRITE VMA.

Consequently, above reproducer triggers a warning, similar to the one
reported by szsbot:

------------[ cut here ]------------
WARNING: CPU: 1 PID: 3612 at mm/hugetlb.c:5313 hugetlb_wp+0x20a/0x1af0 mm/hugetlb.c:5313
Modules linked in:
CPU: 1 PID: 3612 Comm: syz-executor250 Not tainted 6.1.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022
RIP: 0010:hugetlb_wp+0x20a/0x1af0 mm/hugetlb.c:5313
Code: ea 03 80 3c 02 00 0f 85 31 14 00 00 49 8b 5f 20 31 ff 48 89 dd 83 e5 02 48 89 ee e8 70 ab b7 ff 48 85 ed 75 5b e8 76 ae b7 ff <0f> 0b 41 bd 40 00 00 00 e8 69 ae b7 ff 48 b8 00 00 00 00 00 fc ff
RSP: 0018:ffffc90003caf620 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000008640070 RCX: 0000000000000000
RDX: ffff88807b963a80 RSI: ffffffff81c4ed2a RDI: 0000000000000007
RBP: 0000000000000000 R08: 0000000000000007 R09: 0000000000000000
R10: 0000000000000000 R11: 000000000008c07e R12: ffff888023805800
R13: 0000000000000000 R14: ffffffff91217f38 R15: ffff88801d4b0360
FS:  0000555555bba300(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fff7a47a1b8 CR3: 000000002378d000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 hugetlb_no_page mm/hugetlb.c:5755 [inline]
 hugetlb_fault+0x19cc/0x2060 mm/hugetlb.c:5874
 follow_hugetlb_page+0x3f3/0x1850 mm/hugetlb.c:6301
 __get_user_pages+0x2cb/0xf10 mm/gup.c:1202
 __get_user_pages_locked mm/gup.c:1434 [inline]
 __get_user_pages_remote+0x18f/0x830 mm/gup.c:2187
 get_user_pages_remote+0x84/0xc0 mm/gup.c:2260
 __access_remote_vm+0x287/0x6b0 mm/memory.c:5517
 ptrace_access_vm+0x181/0x1d0 kernel/ptrace.c:61
 generic_ptrace_pokedata kernel/ptrace.c:1323 [inline]
 ptrace_request+0xb46/0x10c0 kernel/ptrace.c:1046
 arch_ptrace+0x36/0x510 arch/x86/kernel/ptrace.c:828
 __do_sys_ptrace kernel/ptrace.c:1296 [inline]
 __se_sys_ptrace kernel/ptrace.c:1269 [inline]
 __x64_sys_ptrace+0x178/0x2a0 kernel/ptrace.c:1269
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
[...]

So let's silence that warning by teaching GUP code that FOLL_FORCE -- so
far -- does not apply to hugetlb.

Note that FOLL_FORCE for read-access seems to be working as expected.  The
assumption is that this has been broken forever, only ever since above
commit, we actually detect the wrong handling and WARN_ON_ONCE().

I assume this has been broken at least since 2014, when mm/gup.c came to
life.  I failed to come up with a suitable Fixes tag quickly.

Link: https://lkml.kernel.org/r/20221031152524.173644-1-david@redhat.com
Fixes: 1d8d14641fd9 ("mm/hugetlb: support write-faults in shared mappings")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: <syzbot+f0b97304ef90f0d0b1dc@syzkaller.appspotmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

habanalabs: remove FOLL_FORCE usage

FOLL_FORCE is really only for ptrace access. As we unpin the pinned pages
using unpin_user_pages_dirty_lock(true), the assumption is that all these
pages are writable.

FOLL_FORCE in this case seems to be due to copy-and-past from other
drivers. Let's just remove it.

Link: https://lkml.kernel.org/r/20221116102659.70287-20-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Oded Gabbay <ogabbay@kernel.org>
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>