Russell King [Sat, 12 Sep 2009 10:50:52 +0000 (11:50 +0100)]
Merge branch 'nomadik' into devel-stable
Russell King [Tue, 8 Sep 2009 20:21:15 +0000 (21:21 +0100)]
Merge branch 'for-rmk' of git://git.marvell.com/orion into devel-stable
Simon Guinot [Tue, 23 Jun 2009 11:54:35 +0000 (13:54 +0200)]
[ARM] orion5x: Add LaCie NAS 2Big Network support
This patch add support for the 2Big Network LaCie boards.
Signed-off-by: Simon Guinot <sguinot@lacie.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Russell King [Mon, 17 Aug 2009 17:16:28 +0000 (18:16 +0100)]
Merge branch 'next-s3c' of git://aeryn.fluff.org.uk/bjdooks/linux into devel-stable
Ben Dooks [Mon, 3 Aug 2009 14:11:29 +0000 (15:11 +0100)]
ARM: Show FIQ in /proc/interrupts on CONFIG_FIQ
The show_fiq_list() call in arch/arm/kernel/irq.c currently depends on
CONFIG_ARCH_ACORN, but this is not the only architecture that supports
the usage of FIQ. Change to calling this if CONFIG_FIQ is set (which
is what arch/arm/kernel/fiq.c is built by).
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Sun, 16 Aug 2009 22:54:58 +0000 (23:54 +0100)]
ARM: S3C: Add S3C_DEV_NAND Kconfig entry
Currently the S5PC100 does not define S3C_PA_NAND, leaving the NAND device
definitions in arch/arm/plat-s3c/dev-nand.c unbuildable. Add a KConfig
entry to select whether this is built.
As backwards compatibility, both the S3C24XX and S3C64XX define the new
configuration in their main Kconfig files until better support for basing
this selection on a per-machine basis can be sorted out.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Byungho Min [Tue, 23 Jun 2009 12:40:28 +0000 (21:40 +0900)]
ARM: S5PC100: Board and configuration file
SMDKC100 board support.
The board can be obtained from meritech (http://www.meritech.co.kr)
Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: fixup subject and description]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Byungho Min [Tue, 23 Jun 2009 12:39:42 +0000 (21:39 +0900)]
ARM: S5PC100: Kconfigs and Makefiles
S5PC100 is a new SoC with ARM coretex-A8 and numerous peripherals. This SoC is
successor of S3C64XX. S5PC100 has peripherals which are still similar to S3C
families so some drivers in "arch/arm/plat-s3c" can be shared. S5PC100 specific
drivers will be added in "arch/arm/plat-s5pcxx" or "arch/arm/mach-s5pc100"
Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: tidy and edit description]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Byungho Min [Tue, 23 Jun 2009 12:39:56 +0000 (21:39 +0900)]
ARM: S5PC100: Clock and PLL support
S5PC100 has 4 PLLs (APLL,MPLL,EPLL,HPLL) and 3 clock domains. Clock scheme is
implemented here.
Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: edited title]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Byungho Min [Tue, 23 Jun 2009 12:40:03 +0000 (21:40 +0900)]
ARM: S5PC100: IRQ and timer
S5PC100 has 3 VICs(Vectored Interrupt Controller). The VICs come from S3C64xx
series, so the driver source code can be shared with S3C families. The S5PC100
has 3 VICs while S3C64xx has only 2.
Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: subject fixup]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Byungho Min [Tue, 23 Jun 2009 12:40:22 +0000 (21:40 +0900)]
ARM: S5PC100: GPIO and I2C
S5PC100 has more GPIO group then previous one. It has 34 groups of GPIO, while
S3C6410 has 17 groups. For now, only header files are written.
Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: subject fixup]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Byungho Min [Tue, 23 Jun 2009 12:40:15 +0000 (21:40 +0900)]
ARM: S5PC100: CPU initialization
Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: subject fixup]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Byungho Min [Tue, 23 Jun 2009 12:40:09 +0000 (21:40 +0900)]
ARM: S5PC100: UART and Serial
Serial driver of S5PC100 is the same as S3C6400, so S5PC100 shares the serial
driver with S3C6400. Uart driver is copied from plat-s3c64xx to plat-s5pc1xx,
as I do not use plat-s3c64xx directory.
Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: title fixup]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Byungho Min [Tue, 23 Jun 2009 12:39:49 +0000 (21:39 +0900)]
ARM: S5PC100: Memory map
S5PC100's the physical IO space starts at 0xe000"0000. To maximize space for
vmalloc, the virtual IO space starts at 0xf400"0000 as same as other samsung
CPUs(s3c24xx and s3c64xx) do.
Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: subject and description fixup]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Russell King [Sat, 15 Aug 2009 15:51:48 +0000 (16:51 +0100)]
Merge branch 'for-rmk-2.6.32' of git://git.pengutronix.de/git/ukl/linux-2.6 into devel-stable
Russell King [Sat, 15 Aug 2009 15:49:31 +0000 (16:49 +0100)]
Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into devel-stable
Ben Dooks [Fri, 14 Aug 2009 14:24:06 +0000 (15:24 +0100)]
Merge branch 'next-s3c64xx-moves' into next-s3c
Ben Dooks [Fri, 14 Aug 2009 14:24:01 +0000 (15:24 +0100)]
Merge branch 'next-s3c64xx' into next-s3c
Ben Dooks [Fri, 14 Aug 2009 14:23:45 +0000 (15:23 +0100)]
Merge branch 'next-s3c24xx-cpufreq' into next-s3c
Ben Dooks [Fri, 14 Aug 2009 14:23:34 +0000 (15:23 +0100)]
Merge branch 'next-s3c24xx' into next-s3c
Ben Dooks [Fri, 14 Aug 2009 14:23:22 +0000 (15:23 +0100)]
Merge branch 'next-s3c-machines' into next-s3c
Ben Dooks [Fri, 14 Aug 2009 14:23:15 +0000 (15:23 +0100)]
Merge branch 'next-s3c-hwmon' into next-s3c
Sascha Hauer [Thu, 13 Aug 2009 08:04:44 +0000 (10:04 +0200)]
mx21ads: Fix framebuffer platform data
struct imx_fb_platform_data has changed and the mx21ads was
forgotten to change. Fix it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Thu, 13 Aug 2009 08:02:30 +0000 (10:02 +0200)]
MX21: Compilation fix for devices.c
The OTG devices are only available on i.MX27, so ifdef
them out for i.MX21.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Valentin Longchamp [Wed, 12 Aug 2009 09:29:21 +0000 (11:29 +0200)]
mx31moboard: two GPIOS are used to reset other microcontrolers on the robot
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Valentin Longchamp [Wed, 12 Aug 2009 09:29:20 +0000 (11:29 +0200)]
mx31moboard: initialize 4 input gpios for mx31moboard
These gpios are exported to userspace and are here to be used as
a selector
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Valentin Longchamp [Wed, 12 Aug 2009 09:29:19 +0000 (11:29 +0200)]
mx31moboard: support for the 4 leds used on mx31moboard
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Valentin Longchamp [Wed, 12 Aug 2009 09:29:18 +0000 (11:29 +0200)]
mx31: define various GPIOs used on mx31moboard
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Luotao Fu [Thu, 18 Jun 2009 14:44:18 +0000 (16:44 +0200)]
pcm037: mux configuration for predefined gpio line
Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
Luotao Fu [Thu, 18 Jun 2009 12:15:22 +0000 (14:15 +0200)]
pcm043: mux configuration for predefined gpio line
Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
Luotao Fu [Thu, 18 Jun 2009 10:21:51 +0000 (12:21 +0200)]
pcm038: mux configuration for predefined gpio line
Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
Sascha Hauer [Fri, 20 Mar 2009 18:25:01 +0000 (19:25 +0100)]
MX31 Fix spi clock names
Fix the SPI clock names to match the device names.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Fri, 17 Apr 2009 14:52:25 +0000 (16:52 +0200)]
mx3x: Fixup USB base addresses
The i.MX31 and the i.MX35 have different USB base addresses. Adjust
the resources accordingly.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Luotao Fu [Thu, 6 Aug 2009 09:19:39 +0000 (11:19 +0200)]
mx27: add support for phytec pca100 (phyCARD-s) board
Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Tue, 17 Mar 2009 14:43:54 +0000 (15:43 +0100)]
i.MX35 clock support: Add USB clocks
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Fri, 19 Dec 2008 13:32:15 +0000 (14:32 +0100)]
MX31: add spi controller devices/resources
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Fri, 19 Dec 2008 13:32:14 +0000 (14:32 +0100)]
MX2: Add SPI devices/resources
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Valentin Longchamp [Mon, 10 Aug 2009 16:33:12 +0000 (18:33 +0200)]
mx31moboard: move usb otg support back to moboard common file
since all boards finally have this device
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Valentin Longchamp [Mon, 10 Aug 2009 16:33:11 +0000 (18:33 +0200)]
mx31moboard: added usb xcvr reset for mx31moboard
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Valentin Longchamp [Mon, 10 Aug 2009 16:33:10 +0000 (18:33 +0200)]
mx31: added one more pin definition
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Dmitriy Taychenachev [Fri, 31 Jul 2009 11:29:23 +0000 (20:29 +0900)]
MXC: add iomux pins configuration support for MXC91231
Signed-off-by: Dmitriy Taychenachev <dimichxp@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Dmitriy Taychenachev [Fri, 31 Jul 2009 11:29:22 +0000 (20:29 +0900)]
MXC: add basic MXC91231 support
Signed-off-by: Dmitriy Taychenachev <dimichxp@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Lothar Waßmann [Wed, 15 Jul 2009 13:19:34 +0000 (15:19 +0200)]
i.MX25 iomux definitions (corrected version)
Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Wed, 15 Jul 2009 07:31:15 +0000 (09:31 +0200)]
fix mx35 wrong clock
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Thu, 4 Jun 2009 09:32:46 +0000 (11:32 +0200)]
Freescale i.MX25 PDK (3ds) board support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Thu, 4 Jun 2009 09:32:12 +0000 (11:32 +0200)]
Add i.MX25 support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Fri, 19 Jun 2009 09:08:07 +0000 (11:08 +0200)]
mxc pwm: add mx25 support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Thu, 4 Jun 2009 09:16:22 +0000 (11:16 +0200)]
iomux-v3: Allow for a runtime base address
also, check for a valid pad_ctrl_ofs before changing the
pad control register.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Wed, 27 May 2009 16:09:54 +0000 (18:09 +0200)]
MXC: i.MX25 timer support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Mon, 25 May 2009 08:50:52 +0000 (10:50 +0200)]
MXC: use variable for irq controller base in entry-macro.S
This allows us to determine the irq controller base address
on runtime.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Daniel Mack [Thu, 25 Jun 2009 10:37:16 +0000 (12:37 +0200)]
ARM: MX3: add ckil clock
The CKIL clock source is used by the upcoming RTC driver, so we need
to export it.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Mon, 20 Jul 2009 06:18:47 +0000 (08:18 +0200)]
ARM: mxc: Fix i2c_board_info definitions
Fix i2c_board_info definitions - we were defining the 'type' field
of these structures twice since the first argument of I2C_BOARD_INFO
sets this field. Move the second definition into I2C_BOARD_INFO().
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Jean Delvare <khali@linux-fr.org>
Ben Dooks [Mon, 3 Aug 2009 16:26:50 +0000 (17:26 +0100)]
ARM: S3C24XX: Add SPI bus 1 on GPD8 through GPD10
Add configuration callback for SPI bus 1 on GPD[8..10] and ensure the
correct GPIO configuration register definitions in regs-gpio.h
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Mark Brown [Wed, 5 Aug 2009 17:29:57 +0000 (18:29 +0100)]
ARM: S3C24XX: Add platform device for AC97 controller
Move the definition of the "generic" IRQ in the process.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Mon, 3 Aug 2009 16:26:57 +0000 (17:26 +0100)]
ARM: S3C24XX: Add FIQ IRQ routing support
Add support for routing an IRQ from the normal ARM IRQ mechanism to the
FIQ input of the processor.
Note, also fix a bug where the init_FIQ() function has not been called
when CONFIG_FIQ is enabled.
Signed-off-by; Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Mark Brown [Wed, 5 Aug 2009 17:21:57 +0000 (18:21 +0100)]
ARM: S3C: Move S3C64xx audio devices into S3C64xx directory
Allowing us to make the Kconfig a little bit saner.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Mark Brown [Wed, 5 Aug 2009 17:21:59 +0000 (18:21 +0100)]
ARM: S3C64XX: Add address mapping for AC97 controller
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Mark Brown [Tue, 4 Aug 2009 15:25:12 +0000 (16:25 +0100)]
ARM: S3C64XX: Add mapping for IISv4 port
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Matt Hsu [Mon, 29 Jun 2009 11:03:41 +0000 (19:03 +0800)]
ARM: S3C64XX: Add UART2,UART3 support for SMDK6410 (resend)
Add proper uartcfg for UART port 2,3 and tidy it up on SMDK6410.
Signed-off-by: Matt Hsu <matt@0xlab.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Marek Szyprowski [Wed, 24 Jun 2009 06:05:43 +0000 (08:05 +0200)]
ARM: NCP: make ncp_iodesc static and move it to initdata section
Make ncp_iodesc struct static to clean a public namespace a bit and move
it to __initdata section to save memory a bit.
Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Uwe Kleine-König [Thu, 13 Aug 2009 19:09:21 +0000 (21:09 +0200)]
[ARM] let arch/arm/Kconfig source drivers/Kconfig
The changes introduced by this change are:
- drivers/mtd/Kconfig doesn't depend on ALIGNMENT_TRAP ||
!CPU_CP15_MMU any more
- the following files are sourced additionally:
+ drivers/macintosh/Kconfig
completely depends on PPC || MAC || X86
+ drivers/telephony/Kconfig
new
+ drivers/pps/Kconfig
new
+ drivers/infiniband/Kconfig
new
+ drivers/edac/Kconfig
depends on X86 || PPC
+ drivers/vlynq/Kconfig
depends on AR7 && EXPERIMENTAL (that is ARCH_MIPS)
+ drivers/xen/Kconfig
everything depends on XEN
+ drivers/platform/Kconfig
depends on X86
- drivers/regulator/Kconfig is sourced later as is
drivers/accessibility/Kconfig
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Uwe Kleine-König [Thu, 13 Aug 2009 18:38:17 +0000 (20:38 +0200)]
Use kernel/Kconfig.preempt for ARM
before this patch ARM had it's own definition of CONFIG_PREEMPT.
Instead of that use the general definition provided in
kernel/Kconfig.preempt.
This patch changes the available options in *config. Namely PREEMPT
isn't a stand alone bool anymore, but part of a 'choice' the
following Kconfig symbols are added:
PREEMPT_NONE
PREEMPT_VOLUNTARY
Selecting PREEMPT_NONE now produces exactly the code as not selecting
PREEMPT before (apart from a comment in
/sys/kernel/debug/tracing/(per_cpu/cpuX/)?trace). The only difference
PREEMPT_VOLUNTARY does is that might_resched might reschedule. Both
should't introduce regressions.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Uwe Kleine-König [Thu, 13 Aug 2009 18:38:17 +0000 (20:38 +0200)]
Complete irq tracing support for ARM
Before this patch enabling and disabling irqs in assembler code and by
the hardware wasn't tracked completly.
I had to transpose two instructions in arch/arm/lib/bitops.h because
restore_irqs doesn't preserve the flags with CONFIG_TRACE_IRQFLAGS=y
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Uwe Kleine-König [Thu, 13 Aug 2009 18:38:16 +0000 (20:38 +0200)]
[ARM] support tracing when using newer compilers
Since gcc 4.4 the name and calling convention for function profiling
on ARM changed. With this patch both types are supported.
See http://sourceware.org/ml/libc-ports/2008-04/msg00009.html for some
details.
Lightly-Tested-by: Anand Gadiyar <gadiyar@ti.com>
Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Uwe Kleine-König [Thu, 13 Aug 2009 18:38:16 +0000 (20:38 +0200)]
netx: Use get_irqnr_preamble to initialize base register
This patch optimizes the irq handling a bit. Now the base register is
only computed once per irq exception instead of at least twice.
Moreover the mov+add sequence is simplified to an ldr (which might save
some cycles depending on memory timing).
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Russell King [Thu, 13 Aug 2009 13:22:39 +0000 (14:22 +0100)]
Merge branch 'for-rmk' of git://git.marvell.com/orion into devel-stable
Nicolas Pitre [Wed, 12 Aug 2009 03:28:51 +0000 (23:28 -0400)]
[ARM] add MAINTAINERS entry for Orion/Kirkwood/etc.
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Ron Lee [Mon, 10 Aug 2009 12:53:48 +0000 (18:23 +0530)]
[ARM] Kirkwood: Initialise SATA for OpenRD-Base
Signed-off-by: Ron Lee <ron@debian.org>
Signed-off-by: Dhaval Vasa <dhaval.vasa@einfochips.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Dhaval Vasa [Mon, 10 Aug 2009 12:07:34 +0000 (17:37 +0530)]
[ARM] Kirkwood: Marvell OpenRD-Base board support
reference:
http://open-rd.org
http://code.google.com/p/openrd
This patch is tested for:
1. Boot from DRAM/NAND flash
2. NAND read/write/erase
3. GbE0
4. USB read/write
FIXME:
1. SD/UART1 selection
2. MPP configuration (currently, default)
3. PEX
Signed-off-by: Dhaval Vasa <dhaval.vasa@einfochips.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Lennert Buytenhek [Mon, 3 Aug 2009 14:25:12 +0000 (16:25 +0200)]
¶ARM] Orion5x: fix cpu window mapping for 88f6183
On the 88f6183, orion5x's setup_cpu_win() fails to ever program any
mbus bridge remap registers, which causes transactions for PCI/PCIe
IO/MEM space to get sent to random mbus targets. Adding a check for
the 6183 in orion5x_cpu_win_can_remap() is necessary and sufficient
to make PCIe wlan cards work on the 6183 reference design.
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Siddarth Gore [Tue, 9 Jun 2009 09:11:02 +0000 (14:41 +0530)]
[ARM] Kirkwood: Add support for 6281-A1
Signed-off-by: Siddarth Gore <gores@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Simon Guinot [Mon, 22 Jun 2009 19:45:01 +0000 (21:45 +0200)]
[ARM] orion5x: Add LaCie NAS d2Network support
This patch add support for the d2 Network and the Big Disk Network
LaCie boards.
Signed-off-by: Simon Guinot <sguinot@lacie.com>
Acked-by: Christopher Moore <moore@free.fr>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Eric Benard [Thu, 16 Jul 2009 14:26:34 +0000 (16:26 +0200)]
Add support for Eukrea's MBIMX27
MBIMX27 is the evaluation board for CPUIMX27 and integrates : a
QVGA TFT, a SPI touchscreen controler, a SDCard connector wired to
SDHC1.
Signed-off-by: Eric Benard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Eric Benard [Thu, 16 Jul 2009 14:26:33 +0000 (16:26 +0200)]
Add support for Eukrea's CPUIMX27
CPUIMX27 is built around Freescale's i.MX27 and has up to 64MB of
NOR Flash, up to 512MB of NAND Flash and up to 256MB of mDDR,
it includes an ethernet PHY in MII mode, an I2C RTC and a
ST16554 QuadUART on nCS3.
Signed-off-by: Eric Benard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
javier Martin [Wed, 15 Jul 2009 13:26:21 +0000 (15:26 +0200)]
MX27: Add USB platform devices and resources
This adds clocks and resources for usb in i.mx27 SoC.
Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Daniel Mack [Thu, 25 Jun 2009 12:11:52 +0000 (14:11 +0200)]
MX3: add additional USB pins to iomux
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Thu, 25 Jun 2009 12:11:51 +0000 (14:11 +0200)]
ehci mxc: Fix clocks
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Daniel Mack [Thu, 25 Jun 2009 12:11:50 +0000 (14:11 +0200)]
MX3: Add USB platform devices and resources
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Sat, 7 Feb 2009 12:37:29 +0000 (13:37 +0100)]
[ARM] MXC: remove the now unused #ifndef CONFIG_COMMON_CLKDEV
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Sat, 7 Feb 2009 12:34:01 +0000 (13:34 +0100)]
[ARM] MXC: Switch MX1 to clkdev support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Wed, 3 Jun 2009 09:22:32 +0000 (11:22 +0200)]
MXC PLL decoding: calculate mfn value with less magic
Also, use cpu_is_* macros rather than CONFIG_ARCH_*
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Fri, 19 Jun 2009 09:35:08 +0000 (11:35 +0200)]
MXC: pwm driver fixes
- fix off-by-one error in divider calculation
- disable pwm in pwm_disable
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Wed, 27 May 2009 16:26:51 +0000 (18:26 +0200)]
MXC gpio interrupt support: move register definitions to .c file
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Mon, 15 Jun 2009 10:36:25 +0000 (12:36 +0200)]
mxc gpio: CONFIG_ARCH_* -> cpu_is_*()
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Tue, 23 Jun 2009 11:21:42 +0000 (13:21 +0200)]
pcm038: Add support for SJA1000 on baseboard
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Tue, 23 Jun 2009 11:21:28 +0000 (13:21 +0200)]
pcm037: Add support for SJA1000 on baseboard
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Thu, 19 Mar 2009 07:25:41 +0000 (08:25 +0100)]
imxfb: Add support for multiple displays
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Mon, 29 Jun 2009 09:41:09 +0000 (11:41 +0200)]
imxfb: use resource_size() macro
This fixes an off-by-one error. Also, use dev_err instead of printk
in probe() function.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Wed, 18 Mar 2009 10:29:31 +0000 (11:29 +0100)]
imxfb: calculate bpix value from bits_per_pixel
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Tue, 23 Jun 2009 10:14:39 +0000 (12:14 +0200)]
mx1: Codingstyle: Let the compiler count arrays
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Tue, 23 Jun 2009 10:12:00 +0000 (12:12 +0200)]
mx3: Codingstyle: Let the compiler count arrays
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Tue, 23 Jun 2009 10:04:36 +0000 (12:04 +0200)]
mx2: Codingstyle: Let the compiler count arrays
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Tue, 23 Jun 2009 09:52:26 +0000 (11:52 +0200)]
mx2: remove mxc_irda platform device
Irda support is handled by the normal ims serial driver, so
we do not need this device.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Thu, 4 Jun 2009 08:32:08 +0000 (10:32 +0200)]
MXC iomux-v3: Fix defines for PAD_CTL registers
The old defines leaked in from an old version of the patch.
Change the defines to match the register layout of the iomuxer.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Mon, 25 May 2009 15:36:19 +0000 (17:36 +0200)]
mxc: turn to soc specific init_irq functions
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Wed, 27 May 2009 16:33:58 +0000 (18:33 +0200)]
mxc: remove do not include directly
Everyone should be free to include the files he actually needs.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Wed, 27 May 2009 16:23:48 +0000 (18:23 +0200)]
i.MX serial: do not use #ifdef CONFIG_ARCH_*
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Thu, 4 Jun 2009 11:45:37 +0000 (13:45 +0200)]
MXC: remove board specific setup of MXC_LL_UART_[PV]ADDR
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Thu, 4 Jun 2009 11:29:57 +0000 (13:29 +0200)]
MXC uncompress macros: determine uart base by machine type
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Mon, 25 May 2009 15:22:18 +0000 (17:22 +0200)]
mxc: remove ARCH_NR_GPIOS
Use the default value of 256 which is enough for all i.MX SoCs.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
projects / platform / kernel / linux-rpi.git / log