review.tizen.org Git - platform/kernel/linux-starfive.git/log

fprobe: Fix to ensure the number of active retprobes is not zero

The number of active retprobes can be zero but it is not acceptable,
so return EINVAL error if detected.

Link: https://lore.kernel.org/all/169750018550.186853.11198884812017796410.stgit@devnote2/
Reported-by: wuqiang.matt <wuqiang.matt@bytedance.com>
Closes: https://lore.kernel.org/all/20231016222103.cb9f426edc60220eabd8aa6a@kernel.org/
Fixes: 5b0ab78998e3 ("fprobe: Add exit_handler support")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

Documentation: probes: Add a new ret_ip callback parameter

Add a new ret_ip callback parameter description.

Link: https://lore.kernel.org/all/169556257133.146934.13560704846459957726.stgit@devnote2/
Fixes: cb16330d1274 ("fprobe: Pass return address to the handlers")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Florent Revest <revest@chromium.org>

Linux 6.6-rc6

Revert "x86/smp: Put CPUs into INIT on shutdown if possible"

This reverts commit 45e34c8af58f23db4474e2bfe79183efec09a18b, and the
two subsequent fixes to it:

  3f874c9b2aae ("x86/smp: Don't send INIT to non-present and non-booted CPUs")
  b1472a60a584 ("x86/smp: Don't send INIT to boot CPU")

because it seems to result in hung machines at shutdown.  Particularly
some Dell machines, but Thomas says

"The rest seems to be Lenovo and Sony with Alderlake/Raptorlake CPUs -
  at least that's what I could figure out from the various bug reports.

  I don't know which CPUs the DELL machines have, so I can't say it's a
  pattern.

  I agree with the revert for now"

Ashok Raj chimes in:

"There was a report (probably this same one), and it turns out it was a
  bug in the BIOS SMI handler.

  The client BIOS's were waiting for the lowest APICID to be the SMI
  rendevous master. If this is MeteorLake, the BSP wasn't the one with
  the lowest APIC and it triped here.

  The BIOS change is also being pushed to others for assimilation :)

  Server BIOS's had this correctly for a while now"

and it does look likely to be some bad interaction between SMI and the
non-BSP cores having put into INIT (and thus unresponsive until reset).

Link: https://bbs.archlinux.org/viewtopic.php?pid=2124429
Link: https://www.reddit.com/r/openSUSE/comments/16qq99b/tumbleweed_shutdown_did_not_finish_completely/
Link: https://forum.artixlinux.org/index.php/topic,5997.0.html
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2241279
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

virtio_net: fix the missing of the dma cpu sync

Commit 295525e29a5b ("virtio_net: merge dma operations when filling
mergeable buffers") unmaps the buffer with DMA_ATTR_SKIP_CPU_SYNC when
the dma->ref is zero. We do that with DMA_ATTR_SKIP_CPU_SYNC, because we
do not want to do the sync for the entire page_frag. But that misses the
sync for the current area.

This patch does cpu sync regardless of whether the ref is zero or not.

Fixes: 295525e29a5b ("virtio_net: merge dma operations when filling mergeable buffers")
Reported-by: Michael Roth <michael.roth@amd.com>
Closes: http://lore.kernel.org/all/20230926130451.axgodaa6tvwqs3ut@amd.com
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'usb-6.6-rc6' of git://git./linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt fixes from Greg KH:
"Here are some USB and Thunderbolt driver fixes for 6.6-rc6 to resolve
  a number of small reported issues. Included in here are:

   - thunderbolt driver fixes

   - xhci driver fixes

   - cdns3 driver fixes

   - musb driver fixes

   - a number of typec driver fixes

   - a few other small driver fixes

  All of these have been in linux-next with no reported issues"

* tag 'usb-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits)
  usb: typec: ucsi: Use GET_CAPABILITY attributes data to set power supply scope
  usb: typec: ucsi: Fix missing link removal
  usb: typec: altmodes/displayport: Signal hpd low when exiting mode
  xhci: Preserve RsvdP bits in ERSTBA register correctly
  xhci: Clear EHB bit only at end of interrupt handler
  xhci: track port suspend state correctly in unsuccessful resume cases
  usb: xhci: xhci-ring: Use sysdev for mapping bounce buffer
  usb: typec: ucsi: Clear EVENT_PENDING bit if ucsi_send_command fails
  usb: misc: onboard_hub: add support for Microchip USB2412 USB 2.0 hub
  usb: gadget: udc-xilinx: replace memcpy with memcpy_toio
  usb: cdns3: Modify the return value of cdns_set_active () to void when CONFIG_PM_SLEEP is disabled
  usb: dwc3: Soft reset phy on probe for host
  usb: hub: Guard against accesses to uninitialized BOS descriptors
  usb: typec: qcom: Update the logic of regulator enable and disable
  usb: gadget: ncm: Handle decoding of multiple NTB's in unwrap call
  usb: musb: Get the musb_qh poniter after musb_giveback
  usb: musb: Modify the "HWVers" register address
  usb: cdnsp: Fixes issue with dequeuing not queued requests
  thunderbolt: Restart XDomain discovery handshake after failure
  thunderbolt: Correct TMU mode initialization from hardware
  ...

Merge tag 'tty-6.6-rc6' of git://git./linux/kernel/git/gregkh/tty

Pull tty/serial driver fixes from Greg KH:
"Here are some small tty/serial driver fixes for 6.6-rc6 that resolve
  some reported issues. Included in here are:

   - serial core pm runtime fix for issue reported by many

   - 8250_omap driver fix

   - rs485 spinlock fix for reported problem

   - ams-delta bugfix for previous tty api changes in -rc1 that missed
     this driver that never seems to get built in any test systems

  All of these have been in linux-next for over a week with no reported
  problems"

* tag 'tty-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  ASoC: ti: ams-delta: Fix cx81801_receive() argument types
  serial: core: Fix checks for tx runtime PM state
  serial: 8250_omap: Fix errors with no_console_suspend
  serial: Reduce spinlocked portion of uart_rs485_config()

Merge tag 'char-misc-6.6-rc6' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
"Here is a small set of char/misc and other smaller driver subsystem
  fixes for 6.6-rc6. Included in here are:

   - lots of iio driver fixes

   - binder memory leak fix

   - mcb driver fixes

   - counter driver fixes

   - firmware loader documentation fix

   - documentation update for embargoed hardware issues

  All of these have been in linux-next for over a week with no reported
  issues"

* tag 'char-misc-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (22 commits)
  iio: pressure: ms5611: ms5611_prom_is_valid false negative bug
  dt-bindings: iio: adc: adi,ad7292: Fix additionalProperties on channel nodes
  iio: adc: ad7192: Correct reference voltage
  iio: light: vcnl4000: Don't power on/off chip in config
  iio: addac: Kconfig: update ad74413r selections
  iio: pressure: dps310: Adjust Timeout Settings
  iio: imu: bno055: Fix missing Kconfig dependencies
  iio: adc: imx8qxp: Fix address for command buffer registers
  iio: cros_ec: fix an use-after-free in cros_ec_sensors_push_data()
  iio: irsd200: fix -Warray-bounds bug in irsd200_trigger_handler
  dt-bindings: iio: rohm,bu27010: add missing vdd-supply to example
  binder: fix memory leaks of spam and pending work
  firmware_loader: Update contact emails for ABI docs
  Documentation: embargoed-hardware-issues.rst: Clarify prenotifaction
  mcb: remove is_added flag from mcb_device struct
  coresight: tmc-etr: Disable warnings for allocation failures
  coresight: Fix run time warnings while reusing ETR buffer
  iio: admv1013: add mixer_vgate corner cases
  iio: pressure: bmp280: Fix NULL pointer exception
  iio: dac: ad3552r: Correct device IDs
  ...

Merge tag 'ovl-fixes-6.6-rc6' of git://git./linux/kernel/git/overlayfs/vfs

Pull overlayfs fixes from Amir Goldstein:

- Various fixes for regressions due to conversion to new mount
   api in v6.5

- Disable a new mount option syntax (append lowerdir) that was
   added in v6.5 because we plan to add a different lowerdir
   append syntax in v6.7

* tag 'ovl-fixes-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
  ovl: temporarily disable appending lowedirs
  ovl: fix regression in showing lowerdir mount option
  ovl: fix regression in parsing of mount options with escaped comma
  fs: factor out vfs_parse_monolithic_sep() helper

Merge tag 'powerpc-6.6-4' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

- Fix softlockup/crash when using hcall tracing

- Fix pte_access_permitted() for PAGE_NONE on 8xx

- Fix inverted pte_young() test in __ptep_test_and_clear_young()
   on 64-bit BookE

- Fix unhandled math emulation exception on 85xx

- Fix kernel crash on syscall return on 476

Thanks to Athira Rajeev, Christophe Leroy, Eddie James, and Naveen N
Rao.

* tag 'powerpc-6.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/47x: Fix 47x syscall return crash
  powerpc/85xx: Fix math emulation exception
  powerpc/64e: Fix wrong test in __ptep_test_and_clear_young()
  powerpc/8xx: Fix pte_access_permitted() for PAGE_NONE
  powerpc/pseries: Remove unused r0 in the hcall tracing code
  powerpc/pseries: Fix STK_PARAM access in the hcall tracing code

Merge tag 'smp-urgent-2023-10-15' of git://git./linux/kernel/git/tip/tip

Pull CPU hotplug fix from Ingo Molnar:
"Fix a Longsoon build warning by harmonizing the
arch_[un]register_cpu() prototypes between architectures"

* tag 'smp-urgent-2023-10-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu-hotplug: Provide prototypes for arch CPU registration

Merge tag '6.6-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd

Pull smb server fixes from Steve French:

- Fix for possible double free in RPC read

- Add additional check to clarify smb2_open path and quiet Coverity

- Fix incorrect error rsp in a compounding path

- Fix to properly fail open of file with pending delete on close

* tag '6.6-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: fix potential double free on smb2_read_pipe() error path
  ksmbd: fix Null pointer dereferences in ksmbd_update_fstate()
  ksmbd: fix wrong error response status by using set_smb2_rsp_status()
  ksmbd: not allow to open file if delelete on close bit is set

Merge tag '6.6-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull smb client fixes from Steve French:

- fix caching race with open_cached_dir and laundromat cleanup of
   cached dirs (addresses a problem spotted with xfstest run with
   directory leases enabled)

- reduce excessive resource usage of laundromat threads

* tag '6.6-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb: client: prevent new fids from being removed by laundromat
  smb: client: make laundromat a delayed worker

Merge tag 'x86-urgent-2023-10-15' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar:
"Fix a false-positive KASAN warning, fix an AMD erratum on Zen4 CPUs,
  and fix kernel-doc build warnings"

* tag 'x86-urgent-2023-10-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/alternatives: Disable KASAN in apply_alternatives()
  x86/cpu: Fix AMD erratum #1485 on Zen4-based CPUs
  x86/resctrl: Fix kernel-doc warnings

Merge tag 'sched-urgent-2023-10-14' of git://git./linux/kernel/git/tip/tip

Pull scheduler fixes from Ingo Molnar:
"Two EEVDF fixes"

* tag 'sched-urgent-2023-10-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/eevdf: Fix pick_eevdf()
sched/eevdf: Fix min_deadline heap integrity

Merge tag 'perf-urgent-2023-10-14' of git://git./linux/kernel/git/tip/tip

Pull x86 perf event fix from Ingo Molnar:
"Fix an LBR sampling bug"

* tag 'perf-urgent-2023-10-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/lbr: Filter vsyscall addresses

ovl: temporarily disable appending lowedirs

Kernel v6.5 converted overlayfs to new mount api.
As an added bonus, it also added a feature to allow appending lowerdirs
using lowerdir=:/lower2,lowerdir=::/data3 syntax.

This new syntax has raised some concerns regarding escaping of colons.
We decided to try and disable this syntax, which hasn't been in the wild
for so long and introduce it again in 6.7 using explicit mount options
lowerdir+=/lower2,datadir+=/data3.

Suggested-by: Miklos Szeredi <miklos@szeredi.hu>
Link: https://lore.kernel.org/r/CAJfpegsr3A4YgF2YBevWa6n3=AcP7hNndG6EPMu3ncvV-AM71A@mail.gmail.com/
Fixes: b36a5780cb44 ("ovl: modify layer parameter parsing")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>

Merge tag 'xfs-6.6-fixes-5' of git://git./fs/xfs/xfs-linux

Pull xfs fixes from Chandan Babu:

- Fix calculation of offset of AG's last block and its length

- Update incore AG block count when shrinking an AG

- Process free extents to busy list in FIFO order

- Make XFS report its i_version as the STATX_CHANGE_COOKIE

* tag 'xfs-6.6-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: reinstate the old i_version counter as STATX_CHANGE_COOKIE
  xfs: Remove duplicate include
  xfs: correct calculation for agend and blockcount
  xfs: process free extents to busy list in FIFO order
  xfs: adjust the incore perag block_count when shrinking

ovl: fix regression in showing lowerdir mount option

Before commit b36a5780cb44 ("ovl: modify layer parameter parsing"),
spaces and commas in lowerdir mount option value used to be escaped using
seq_show_option().

In current upstream, when lowerdir value has a space, it is not escaped
in /proc/mounts, e.g.:

none /mnt overlay rw,relatime,lowerdir=l l,upperdir=u,workdir=w 0 0

which results in broken output of the mount utility:

none on /mnt type overlay (rw,relatime,lowerdir=l)

Store the original lowerdir mount options before unescaping and show
them using the same escaping used for seq_show_option() in addition to
escaping the colon separator character.

Fixes: b36a5780cb44 ("ovl: modify layer parameter parsing")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>

Merge tag 'input-for-v6.6-rc5' of git://git./linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:

- a reworked way for handling reset delay on SMBus-connected Synaptics
   touchpads (the original one, while being correct, uncovered an old
   bug in fallback to PS/2 code that was fixed separately; the new one
   however avoids having delay in serio port "fast" resume, and instead
   has the wait in the RMI4 code)

- a fix for potential crashes when devices with Elan controllers (and
   Synaptics) fall back to PS/2 code. Can't be hit without the original
   patch above, but still good to have it fixed

- a couple new device IDs in xpad Xbox driver

- another quirk for Goodix driver to deal with stuff vendors put in
   ACPI tables

- a fix for use-after-free on disconnect for powermate driver

- a quirk to not initialize PS/2 mouse port on Fujitsu Lifebook E5411
   laptop as it makes keyboard not usable and the device uses
   hid-over-i2c touchpad anyways

* tag 'input-for-v6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: powermate - fix use-after-free in powermate_config_complete
  Input: xpad - add PXN V900 support
  Input: synaptics-rmi4 - handle reset delay when using SMBus trsnsport
  Input: psmouse - fix fast_reconnect function for PS/2 mode
  Revert "Input: psmouse - add delay when deactivating for SMBus mode"
  Input: goodix - ensure int GPIO is in input for gpio_count == 1 && gpio_int_idx == 0 case
  Input: i8042 - add Fujitsu Lifebook E5411 to i8042 quirk table
  Input: xpad - add HyperX Clutch Gladiate Support

Input: powermate - fix use-after-free in powermate_config_complete

syzbot has found a use-after-free bug [1] in the powermate driver. This
happens when the device is disconnected, which leads to a memory free from
the powermate_device struct. When an asynchronous control message
completes after the kfree and its callback is invoked, the lock does not
exist anymore and hence the bug.

Use usb_kill_urb() on pm->config to cancel any in-progress requests upon
device disconnection.

[1] https://syzkaller.appspot.com/bug?extid=0434ac83f907a1dbdd1e

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reported-by: syzbot+0434ac83f907a1dbdd1e@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20230916-topic-powermate_use_after_free-v3-1-64412b81a7a2@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: xpad - add PXN V900 support

Add VID and PID to the xpad_device table to allow driver to use the PXN
V900 steering wheel, which is XTYPE_XBOX360 compatible in xinput mode.

Signed-off-by: Matthias Berndt <matthias_berndt@gmx.de>
Link: https://lore.kernel.org/r/4932699.31r3eYUQgx@fedora
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: synaptics-rmi4 - handle reset delay when using SMBus trsnsport

Touch controllers need some time after receiving reset command for the
firmware to finish re-initializing and be ready to respond to commands
from the host. The driver already had handling for the post-reset delay
for I2C and SPI transports, this change adds the handling to
SMBus-connected devices.

SMBus devices are peculiar because they implement legacy PS/2
compatibility mode, so reset is actually issued by psmouse driver on the
associated serio port, after which the control is passed to the RMI4
driver with SMBus companion device.

Note that originally the delay was added to psmouse driver in
92e24e0e57f7 ("Input: psmouse - add delay when deactivating for SMBus
mode"), but that resulted in an unwanted delay in "fast" reconnect
handler for the serio port, so it was decided to revert the patch and
have the delay being handled in the RMI4 driver, similar to the other
transports.

Tested-by: Jeffery Miller <jefferymiller@google.com>
Link: https://lore.kernel.org/r/ZR1yUFJ8a9Zt606N@penguin
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: psmouse - fix fast_reconnect function for PS/2 mode

When the SMBus connection is attempted psmouse_smbus_init() sets
the fast_reconnect pointer to psmouse_smbus_reconnecti(). If SMBus
initialization fails, elantech_setup_ps2() and synaptics_init_ps2() will
fallback to PS/2 mode, replacing the psmouse private data. This can cause
issues on resume, since psmouse_smbus_reconnect() expects to find an
instance of struct psmouse_smbus_dev in psmouse->private.

The issue was uncovered when in 92e24e0e57f7 ("Input: psmouse - add
delay when deactivating for SMBus mode") psmouse_smbus_reconnect()
started attempting to use more of the data structure. The commit was
since reverted, not because it was at fault, but because there was found
a better way of doing what it was attempting to do.

Fix the problem by resetting the fast_reconnect pointer in psmouse
structure in elantech_setup_ps2() and synaptics_init_ps2() when the PS/2
mode is used.

Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Signed-off-by: Jeffery Miller <jefferymiller@google.com>
Fixes: bf232e460a35 ("Input: psmouse-smbus - allow to control psmouse_deactivate")
Link: https://lore.kernel.org/r/20231005002249.554877-1-jefferymiller@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fix from James Bottomley:
"A single tiny fix in the ufs driver core correcting the reversed logic
in an error message"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Correct clear TM error log

Merge tag 'ceph-for-6.6-rc6' of https://github.com/ceph/ceph-client

Pull ceph fixes from Ilya Dryomov:
"Fixes for an overreaching WARN_ON, two error paths and a switch to
  kernel_connect() which recently grown protection against someone using
  BPF to rewrite the address.

  All but one marked for stable"

* tag 'ceph-for-6.6-rc6' of https://github.com/ceph/ceph-client:
  ceph: fix type promotion bug on 32bit systems
  libceph: use kernel_connect()
  ceph: remove unnecessary IS_ERR() check in ceph_fname_to_usr()
  ceph: fix incorrect revoked caps assert in ceph_fill_file_size()

Merge tag 'acpi-6.6-rc6' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI fixes from Rafael Wysocki:
"Add an ACPI EC GPE detection quirk for HP Pavilion Gaming 15-dk1xxx
  and ACPI IRQ override quirks for TongFang GM6BGEQ, GM6BG5Q and
  GM6BG0Q, and for ASUS ExpertBook B1402CBA (Hans de Goede).

* tag 'acpi-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: resource: Add TongFang GM6BGEQ, GM6BG5Q and GM6BG0Q to irq1_edge_low_force_override[]
  ACPI: EC: Add quirk for the HP Pavilion Gaming 15-dk1xxx
  ACPI: resource: Skip IRQ override on ASUS ExpertBook B1402CBA

Merge tag 'riscv-for-linus-6.6-rc6' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V fixes from Palmer Dabbelt:

- A handful of build fixes

- A fix to avoid mixing up user/kernel-mode breakpoints, which can
   manifest as a hang when mixing k/uprobes with other breakpoint
   sources

- A fix to avoid double-allocting crash kernel memory

- A fix for tracefs syscall name mangling, which was causing syscalls
   not to show up in tracefs

- A fix to the perf driver to enable the hw events when selected, which
   can trigger a BUG on some userspace access patterns

* tag 'riscv-for-linus-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  drivers: perf: Fix panic in riscv SBI mmap support
  riscv: Fix ftrace syscall handling which are now prefixed with __riscv_
  RISC-V: Fix wrong use of CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK
  riscv: kdump: fix crashkernel reserving problem on RISC-V
  riscv: Remove duplicate objcopy flag
  riscv: signal: fix sigaltstack frame size checking
  riscv: errata: andes: Makefile: Fix randconfig build issue
  riscv: Only consider swbp/ss handlers for correct privileged mode
  riscv: kselftests: Fix mm build by removing testcases subdirectory

Merge tag 'soundwire-6.6-fixes' of git://git./linux/kernel/git/vkoul/soundwire

Pull soundwire fix from Vinod Koul:
"A single fix for making sdw bus irq conditionally built"

* tag 'soundwire-6.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: bus: Make IRQ handling conditionally built

Merge tag 'dmaengine-fix-6.6' of git://git./linux/kernel/git/vkoul/dmaengine

Pull dmaengine fixes from Vinod Koul:
"Driver fixes for:

   - stm32 dma residue calculation and chaining

   - stm32 mdma for setting inflight bytes, residue calculation and
     resume abort

   - channel request, channel enable and dma error in fsl_edma

   - runtime pm imbalance in ste_dma40 driver

   - deadlock fix in mediatek driver"

* tag 'dmaengine-fix-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
  dmaengine: fsl-edma: fix all channels requested when call fsl_edma3_xlate()
  dmaengine: stm32-dma: fix residue in case of MDMA chaining
  dmaengine: stm32-dma: fix stm32_dma_prep_slave_sg in case of MDMA chaining
  dmaengine: stm32-mdma: set in_flight_bytes in case CRQA flag is set
  dmaengine: stm32-mdma: use Link Address Register to compute residue
  dmaengine: stm32-mdma: abort resume if no ongoing transfer
  dmaengine: ste_dma40: Fix PM disable depth imbalance in d40_probe
  dmaengine: mediatek: Fix deadlock caused by synchronize_irq()
  dmaengine: idxd: use spin_lock_irqsave before wait_event_lock_irq
  dmaengine: fsl-edma: fix edma4 channel enable failure on second attempt
  dt-bindings: dmaengine: zynqmp_dma: add xlnx,bus-width required property
  dmaengine: fsl-dma: fix DMA error when enabling sg if 'DONE' bit is set

Merge tag 'media/v6.6-5' of git://git./linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:

- a core fix: Don't report V4L2_SUBDEV_CAP_STREAMS when API is disabled

- ipu-bridge: Add a missing acpi_dev_put()

- ov8858: fix driver for probe to work after 6.6-rc1

- xilinx-vipp: fix async notifier logic

* tag 'media/v6.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: i2c: ov8858: Don't set fwnode in the driver
  media: ipu-bridge: Add missing acpi_dev_put() in ipu_bridge_get_ivsc_acpi_dev()
  media: xilinx-vipp: Look for entities also in waiting_list
  media: subdev: Don't report V4L2_SUBDEV_CAP_STREAMS when the streams API is disabled

Merge branches 'acpi-ec' and 'acpi-resource'

Merge ACPI EC driver and ACPI resources handlig changes for 6.6-rc6:

- Add EC GPE fixup quirk for HP Pavilion Gaming 15-dk1xxx (Hans de
   Goede).

- Add ACPI IRQ override quirks for TongFang GM6BGEQ, GM6BG5Q and
   GM6BG0Q, and for ASUS ExpertBook B1402CBA (ans de Goede).

* acpi-ec:
  ACPI: EC: Add quirk for the HP Pavilion Gaming 15-dk1xxx

* acpi-resource:
  ACPI: resource: Add TongFang GM6BGEQ, GM6BG5Q and GM6BG0Q to irq1_edge_low_force_override[]
  ACPI: resource: Skip IRQ override on ASUS ExpertBook B1402CBA

Merge tag 'drm-fixes-2023-10-13' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"Weekly fixes, the core is msm and amdgpu with some scattered fixes
  across vmwgfx, panel and the core stuff.

  atomic-helper:
   - Relax checks for unregistered connectors

  dma-buf:
   - Work around race condition when retrieving fence timestamp

  gem:
   - Avoid OOB access in BO memory range

  panel:
   - boe-tv101wun-ml6: Fix flickering

  simpledrm:
   - Fix error output

  vwmgfx:
   - Fix size calculation in texture-state code
   - Ref GEM BOs in surfaces

  msm:
   - PHY/link training reset fix
   - msm8998 - correct highest bank bit
   - skip video mode if timing engine disabled
   - check irq_of_parse_and_map return code
   - add new lines to some prints
   - fail atomic check for max mdp clk test

  amdgpu:
   - Seamless boot fix
   - Fix TTM BO resource check
   - SI fix for doorbell handling"

* tag 'drm-fixes-2023-10-13' of git://anongit.freedesktop.org/drm/drm:
  drm/tiny: correctly print `struct resource *` on error
  drm: Do not overrun array in drm_gem_get_pages()
  drm/atomic-helper: relax unregistered connector check
  drm/panel: boe-tv101wum-nl6: Completely pull GPW to VGL before TP term
  drm/amdgpu: fix SI failure due to doorbells allocation
  drm/amdgpu: add missing NULL check
  drm/amd/display: Don't set dpms_off for seamless boot
  drm/vmwgfx: Keep a gem reference to user bos in surfaces
  drm/vmwgfx: fix typo of sizeof argument
  drm/msm/dpu: fail dpu_plane_atomic_check() based on mdp clk limits
  dma-buf: add dma_fence_timestamp helper
  drm/msm/dp: Add newlines to debug printks
  drm/msm/dpu: change _dpu_plane_calc_bw() to use u64 to avoid overflow
  drm/msm/dsi: fix irq_of_parse_and_map() error checking
  drm/msm/dsi: skip the wait for video mode done if not applicable
  drm/msm/mdss: fix highest-bank-bit for msm8998
  drm/msm/dp: do not reinitialize phy unless retry during link training

ksmbd: fix potential double free on smb2_read_pipe() error path

Fix new smatch warnings:
fs/smb/server/smb2pdu.c:6131 smb2_read_pipe() error: double free of 'rpc_resp'

Fixes: e2b76ab8b5c9 ("ksmbd: add support for read compound")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

ksmbd: fix Null pointer dereferences in ksmbd_update_fstate()

Coverity Scan report the following one. This report is a false alarm.
Because fp is never NULL when rc is zero. This patch add null check for fp
in ksmbd_update_fstate to make alarm silence.

*** CID 1568583:  Null pointer dereferences  (FORWARD_NULL)
/fs/smb/server/smb2pdu.c: 3408 in smb2_open()
3402                    path_put(&path);
3403                    path_put(&parent_path);
3404            }
3405            ksmbd_revert_fsids(work);
3406     err_out1:
3407            if (!rc) {
>>>     CID 1568583:  Null pointer dereferences  (FORWARD_NULL)
>>>     Passing null pointer "fp" to "ksmbd_update_fstate", which dereferences it.
3408                    ksmbd_update_fstate(&work->sess->file_table, fp, FP_INITED);
3409                    rc = ksmbd_iov_pin_rsp(work, (void *)rsp, iov_len);
3410            }
3411            if (rc) {
3412                    if (rc == -EINVAL)
3413                            rsp->hdr.Status = STATUS_INVALID_PARAMETER;

Fixes: e2b76ab8b5c9 ("ksmbd: add support for read compound")
Reported-by: Coverity Scan <scan-admin@coverity.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

ksmbd: fix wrong error response status by using set_smb2_rsp_status()

set_smb2_rsp_status() after __process_request() sets the wrong error
status. This patch resets all iov vectors and sets the error status
on clean one.

Fixes: e2b76ab8b5c9 ("ksmbd: add support for read compound")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

ksmbd: not allow to open file if delelete on close bit is set

Cthon test fail with the following error.

check for proper open/unlink operation
nfsjunk files before unlink:
  -rwxr-xr-x 1 root root 0  9월 25 11:03 ./nfs2y8Jm9
./nfs2y8Jm9 open; unlink ret = 0
nfsjunk files after unlink:
  -rwxr-xr-x 1 root root 0  9월 25 11:03 ./nfs2y8Jm9
data compare ok
nfsjunk files after close:
  ls: cannot access './nfs2y8Jm9': No such file or directory
special tests failed

Cthon expect to second unlink failure when file is already unlinked.
ksmbd can not allow to open file if flags of ksmbd inode is set with
S_DEL_ON_CLS flags.

Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

Merge tag 'amd-drm-fixes-6.6-2023-10-11' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.6-2023-10-11:

amdgpu:
- Seemless boot fix
- Fix TTM BO resource check
- SI fix for doorbell handling

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231012025637.7783-1-alexander.deucher@amd.com

Merge tag 'drm-msm-fixes-2023-10-07' of https://gitlab.freedesktop.org/drm/msm into drm-fixes

Fixes for v6.6-rc5

- fix to not reset the PHY everytime we start link training but only
  do it if link training fails. Without this, the PLL unlocked
  interrupt fires causing "Unexpected DP AUX IRQ 0x01000000 when
  not busy" spam in the logs since last 2-3 cycles
- correct the highest bank bit to match downstream device tree for
  msm8998
- skip the video mode wait if the timing engine is not enabled. This
  was introduced after pre_enable flag for DSI video mode panels
  where we would end up waiting for the video mode done interrupt
  even before enabling timing engine causing error spam and long
  bootup times.
- check the correct return code of irq_of_parse_and_map() in DSI code
- avoid overflow issues in the dpu bandwidth calculation . This was
  exposed for high resolution displays and a critical fix to avoid
  atomic_check failure
- minor fix to add new lines in DP print messages.
- Fix to fail atomic_check() if the resolution exceeds max mdp clk.
  This leads to underflow otherwise if we try to allow that frame.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGv-HNxQ=VBtZ8geGzYJum9jtManEdbvhcjo_WWF_J9Ziw@mail.gmail.com

Merge tag 'for-v6.6-rc2' of git://git./linux/kernel/git/sre/linux-power-supply

Pull power supply fixes from Sebastian Reichel:

- qcom_battmgr: endianness fixes

* tag 'for-v6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: qcom_battmgr: fix enable request endianness
power: supply: qcom_battmgr: fix battery_id type

Merge tag 'block-6.6-2023-10-12' of git://git.kernel.dk/linux

Pull block fix from Jens Axboe:
"Just a single fix for a longstanding regression with using fallocate
on a block device"

* tag 'block-6.6-2023-10-12' of git://git.kernel.dk/linux:
block: Don't invalidate pagecache for invalid falloc modes

Merge tag 'drm-misc-fixes-2023-10-12' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

Short summary of fixes pull:

* atomic-helper: Relax checks for unregistered connectors
* dma-buf: Work around race condition when retrieving fence timestamp
* gem: Avoid OOB access in BO memory range
* panel:
   * boe-tv101wun-ml6: Fix flickering
* simpledrm: Fix error output
* vwmgfx:
   * Fix size calculation in texture-state code
   * Ref GEM BOs in surfaces

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231012111638.GA25037@linux-uq9g

Merge tag 'cgroup-for-6.6-rc5-fixes' of git://git./linux/kernel/git/tj/cgroup

Pull cgroup fixes from Tejun Heo:

- In cgroup1, the `tasks` file could have duplicate pids which can
   trigger a warning in seq_file. Fix it by removing duplicate items
   after sorting

- Comment update

* tag 'cgroup-for-6.6-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: Fix incorrect css_set_rwsem reference in comment
  cgroup: Remove duplicates in cgroup v1 tasks file

Merge tag 'wq-for-6.6-rc5-fixes' of git://git./linux/kernel/git/tj/wq

Pull workqueue fixes from Tejun Heo:

- Fix access-after-free in pwq allocation error path

- Implicitly ordered unbound workqueues should lose the implicit
   ordering if an attribute change which isn't compatible with ordered
   operation is requested. However, attribute changes requested through
   the sysfs interface weren't doing that leaving no way to override the
   implicit ordering through the sysfs interface. Fix it.

- Other doc and misc updates

* tag 'wq-for-6.6-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: fix -Wformat-truncation in create_worker
  workqueue: Override implicit ordered attribute in workqueue_apply_unbound_cpumask()
  workqueue: Use the kmem_cache_free() instead of kfree() to release pwq
  workqueue: doc: Fix function and sysfs path errors
  workqueue: Fix UAF report by KASAN in pwq_release_workfn()

Revert "Input: psmouse - add delay when deactivating for SMBus mode"

This reverts commit 92e24e0e57f72e06c2df87116557331fd2d4dda2.

While the patch itself is correct, it uncovered an issue with fallback
to PS/2 mode, where we were leaving psmouse->fast_reconnect handler set
to psmouse_smbus_reconnect(), which caused crashes.

While discussing various approaches to fix the issue it was noted that
this patch ass undesired delay in the "fast" resume path of PS/2 device,
and it would be better to actually use "reset_delay" option defined in
struct rmi_device_platform_data and have RMI code handle it for SMBus
transport as well. So this patch is being reverted to deal with crashes
and a better solution will be merged shortly.

Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Closes: https://lore.kernel.org/all/ca0109fa-c64b-43c1-a651-75b294d750a1@leemhuis.info/
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Merge tag 'net-6.6-rc6' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
"Including fixes from CAN and BPF.

  We have a regression in TC currently under investigation, otherwise
  the things that stand off most are probably the TCP and AF_PACKET
  fixes, with both issues coming from 6.5.

  Previous releases - regressions:

   - af_packet: fix fortified memcpy() without flex array.

   - tcp: fix crashes trying to free half-baked MTU probes

   - xdp: fix zero-size allocation warning in xskq_create()

   - can: sja1000: always restart the tx queue after an overrun

   - eth: mlx5e: again mutually exclude RX-FCS and RX-port-timestamp

   - eth: nfp: avoid rmmod nfp crash issues

   - eth: octeontx2-pf: fix page pool frag allocation warning

  Previous releases - always broken:

   - mctp: perform route lookups under a RCU read-side lock

   - bpf: s390: fix clobbering the caller's backchain in the trampoline

   - phy: lynx-28g: cancel the CDR check work item on the remove path

   - dsa: qca8k: fix qca8k driver for Turris 1.x

   - eth: ravb: fix use-after-free issue in ravb_tx_timeout_work()

   - eth: ixgbe: fix crash with empty VF macvlan list"

* tag 'net-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
  rswitch: Fix imbalance phy_power_off() calling
  rswitch: Fix renesas_eth_sw_remove() implementation
  octeontx2-pf: Fix page pool frag allocation warning
  nfc: nci: assert requested protocol is valid
  af_packet: Fix fortified memcpy() without flex array.
  net: tcp: fix crashes trying to free half-baked MTU probes
  net/smc: Fix pos miscalculation in statistics
  nfp: flower: avoid rmmod nfp crash issues
  net: usb: dm9601: fix uninitialized variable use in dm9601_mdio_read
  ethtool: Fix mod state of verbose no_mask bitset
  net: nfc: fix races in nfc_llcp_sock_get() and nfc_llcp_sock_get_sn()
  mctp: perform route lookups under a RCU read-side lock
  net: skbuff: fix kernel-doc typos
  s390/bpf: Fix unwinding past the trampoline
  s390/bpf: Fix clobbering the caller's backchain in the trampoline
  net/mlx5e: Again mutually exclude RX-FCS and RX-port-timestamp
  net/smc: Fix dependency of SMC on ISM
  ixgbe: fix crash with empty VF macvlan list
  net/mlx5e: macsec: use update_pn flag instead of PN comparation
  net: phy: mscc: macsec: reject PN update requests
  ...

workqueue: fix -Wformat-truncation in create_worker

Compiling with W=1 emitted the following warning
(Compiler: gcc (x86-64, ver. 13.2.1, .config: result of make allyesconfig,
"Treat warnings as errors" turned off):

kernel/workqueue.c:2188:54: warning: ‘%d’ directive output may be
truncated writing between 1 and 10 bytes into a region of size
between 5 and 14 [-Wformat-truncation=]
kernel/workqueue.c:2188:50: note: directive argument in the range
[0, 2147483647]
kernel/workqueue.c:2188:17: note: ‘snprintf’ output between 4 and 23 bytes
into a destination of size 16

setting "id_buf" to size 23 will silence the warning, since GCC
determines snprintf's output to be max. 23 bytes in line 2188.

Please let me know if there are any mistakes in my patch!

Signed-off-by: Lucy Mielke <lucymielke@icloud.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

workqueue: Override implicit ordered attribute in workqueue_apply_unbound_cpumask()

Commit 5c0338c68706 ("workqueue: restore WQ_UNBOUND/max_active==1
to be ordered") enabled implicit ordered attribute to be added to
WQ_UNBOUND workqueues with max_active of 1. This prevented the changing
of attributes to these workqueues leading to fix commit 0a94efb5acbb
("workqueue: implicit ordered attribute should be overridable").

However, workqueue_apply_unbound_cpumask() was not updated at that time.
So sysfs changes to wq_unbound_cpumask has no effect on WQ_UNBOUND
workqueues with implicit ordered attribute. Since not all WQ_UNBOUND
workqueues are visible on sysfs, we are not able to make all the
necessary cpumask changes even if we iterates all the workqueue cpumasks
in sysfs and changing them one by one.

Fix this problem by applying the corresponding change made
to apply_workqueue_attrs_locked() in the fix commit to
workqueue_apply_unbound_cpumask().

Fixes: 5c0338c68706 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

Merge tag 'soc-fixes-6.6-2' of git://git./linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
"AngeloGioacchino Del Regno is stepping in as co-maintainer for the
  MediaTek SoC platform and starts by sending some dts fixes for the
  mt8195 platform that had been pending for a while.

  On the ixp4xx platform, Krzysztof Halasa steps down as co-maintainer,
  reflecting that Linus Walleij has been handling this on his own for
  the past few years.

  Generic RISC-V kernels are now marked as incompatible with the RZ/Five
  platform that requires custom hacks both for managing its DMA bounce
  buffers and for addressing low virtual memory.

Finally, there is one bugfix for the AMDTEE firmware driver to prevent
a use-after-free bug"

* tag 'soc-fixes-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  IXP4xx MAINTAINERS entries
  arm64: dts: mediatek: mt8195: Set DSU PMU status to fail
  arm64: dts: mediatek: fix t-phy unit name
  arm64: dts: mediatek: mt8195-demo: update and reorder reserved memory regions
  arm64: dts: mediatek: mt8195-demo: fix the memory size to 8GB
  MAINTAINERS: Add Angelo as MediaTek SoC co-maintainer
  soc: renesas: Make ARCH_R9A07G043 (riscv version) depend on NONPORTABLE
  tee: amdtee: fix use-after-free vulnerability in amdtee_close_session

drivers: perf: Fix panic in riscv SBI mmap support

The following panic can happen when mmap is called before the pmu add
callback which sets the hardware counter index: this happens for example
with the following command `perf record --no-bpf-event -n kill`.

[   99.461486] CPU: 1 PID: 1259 Comm: perf Tainted: G            E      6.6.0-rc4ubuntu-defconfig #2
[   99.461669] Hardware name: riscv-virtio,qemu (DT)
[   99.461748] epc : pmu_sbi_set_scounteren+0x42/0x44
[   99.462337]  ra : smp_call_function_many_cond+0x126/0x5b0
[   99.462369] epc : ffffffff809f9d24 ra : ffffffff800f93e0 sp : ff60000082153aa0
[   99.462407]  gp : ffffffff82395c98 tp : ff6000009a218040 t0 : ff6000009ab3a4f0
[   99.462425]  t1 : 0000000000000004 t2 : 0000000000000100 s0 : ff60000082153ab0
[   99.462459]  s1 : 0000000000000000 a0 : ff60000098869528 a1 : 0000000000000000
[   99.462473]  a2 : 000000000000001f a3 : 0000000000f00000 a4 : fffffffffffffff8
[   99.462488]  a5 : 00000000000000cc a6 : 0000000000000000 a7 : 0000000000735049
[   99.462502]  s2 : 0000000000000001 s3 : ffffffff809f9ce2 s4 : ff60000098869528
[   99.462516]  s5 : 0000000000000002 s6 : 0000000000000004 s7 : 0000000000000001
[   99.462530]  s8 : ff600003fec98bc0 s9 : ffffffff826c5890 s10: ff600003fecfcde0
[   99.462544]  s11: ff600003fec98bc0 t3 : ffffffff819e2558 t4 : ff1c000004623840
[   99.462557]  t5 : 0000000000000901 t6 : ff6000008feeb890
[   99.462570] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003
[   99.462658] [<ffffffff809f9d24>] pmu_sbi_set_scounteren+0x42/0x44
[   99.462979] Code: 1060 4785 97bb 00d7 8fd9 9073 1067 6422 0141 8082 (9002) 0013
[   99.463335] Kernel BUG [#2]

To circumvent this, try to enable userspace access to the hardware counter
when it is selected in addition to when the event is mapped. And vice-versa
when the event is stopped/unmapped.

Fixes: cc4c07c89aad ("drivers: perf: Implement perf event mmap support in the SBI backend")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20231006082010.11963-1-alexghiti@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: Fix ftrace syscall handling which are now prefixed with __riscv_

ftrace creates entries for each syscall in the tracefs but has failed
since commit 08d0ce30e0e4 ("riscv: Implement syscall wrappers") which
prefixes all riscv syscalls with __riscv_.

So fix this by implementing arch_syscall_match_sym_name() which allows us
to ignore this prefix.

And also ignore compat syscalls like x86/arm64 by implementing
arch_trace_is_compat_syscall().

Fixes: 08d0ce30e0e4 ("riscv: Implement syscall wrappers")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20231003182407.32198-1-alexghiti@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Merge tag 'pmdomain-v6.6-rc1-2' of git://git./linux/kernel/git/ulfh/linux-pm

Pull pmdomain fix from Ulf Hansson:

- imx: scu-pd: Correct the DMA2 channel

* tag 'pmdomain-v6.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: imx: scu-pd: correct DMA2 channel

RISC-V: Fix wrong use of CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK

If configuration options SOFTIRQ_ON_OWN_STACK and PREEMPT_RT
are enabled simultaneously under RISC-V architecture,
it will result in a compilation failure:

arch/riscv/kernel/irq.c:64:6: error: redefinition of 'do_softirq_own_stack'
   64 | void do_softirq_own_stack(void)
      |      ^~~~~~~~~~~~~~~~~~~~
In file included from ./arch/riscv/include/generated/asm/softirq_stack.h:1,
                 from arch/riscv/kernel/irq.c:15:
./include/asm-generic/softirq_stack.h:8:20: note: previous definition of 'do_softirq_own_stack' was here
    8 | static inline void do_softirq_own_stack(void)
      |                    ^~~~~~~~~~~~~~~~~~~~

After changing CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK to CONFIG_SOFTIRQ_ON_OWN_STACK,
compilation can be successful.

Fixes: dd69d07a5a6c ("riscv: stack: Support HAVE_SOFTIRQ_ON_OWN_STACK")
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Jiexun Wang <wangjiexun@tinylab.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20230913052940.374686-1-wangjiexun@tinylab.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: kdump: fix crashkernel reserving problem on RISC-V

When testing on risc-v QEMU environment with "crashkernel="
parameter enabled, a problem occurred with the following
message:

[    0.000000] crashkernel low memory reserved: 0xf8000000 - 0x100000000 (128 MB)
[    0.000000] crashkernel reserved: 0x0000000177e00000 - 0x0000000277e00000 (4096 MB)
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/resource.c:779 __insert_resource+0x8e/0xd0
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc2-next-20230920 #1
[    0.000000] Hardware name: riscv-virtio,qemu (DT)
[    0.000000] epc : __insert_resource+0x8e/0xd0
[    0.000000]  ra : insert_resource+0x28/0x4e
[    0.000000] epc : ffffffff80017344 ra : ffffffff8001742e sp : ffffffff81203db0
[    0.000000]  gp : ffffffff812ece98 tp : ffffffff8120dac0 t0 : ff600001f7ff2b00
[    0.000000]  t1 : 0000000000000000 t2 : 3428203030303030 s0 : ffffffff81203dc0
[    0.000000]  s1 : ffffffff81211e18 a0 : ffffffff81211e18 a1 : ffffffff81289380
[    0.000000]  a2 : 0000000277dfffff a3 : 0000000177e00000 a4 : 0000000177e00000
[    0.000000]  a5 : ffffffff81289380 a6 : 0000000277dfffff a7 : 0000000000000078
[    0.000000]  s2 : ffffffff81289380 s3 : ffffffff80a0bac8 s4 : ff600001f7ff2880
[    0.000000]  s5 : 0000000000000280 s6 : 8000000a00006800 s7 : 000000000000007f
[    0.000000]  s8 : 0000000080017038 s9 : 0000000080038ea0 s10: 0000000000000000
[    0.000000]  s11: 0000000000000000 t3 : ffffffff80a0bc00 t4 : ffffffff80a0bc00
[    0.000000]  t5 : ffffffff80a0bbd0 t6 : ffffffff80a0bc00
[    0.000000] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003
[    0.000000] [<ffffffff80017344>] __insert_resource+0x8e/0xd0
[    0.000000] ---[ end trace 0000000000000000 ]---
[    0.000000] Failed to add a Crash kernel resource at 177e00000

The crashkernel memory has been allocated successfully, whereas
it failed to insert into iomem_resource. This is due to the
unique reserving logic in risc-v arch specific code, i.e.
crashk_res/crashk_low_res will be added into iomem_resource
later in init_resources(), which is not aligned with current
unified reserving logic in reserve_crashkernel_{generic,low}()
and therefore leads to the failure of crashkernel reservation.

Removing the arch specific code within #ifdef CONFIG_KEXEC_CORE
in init_resources() to fix above problem.

Fixes: 31549153088e ("riscv: kdump: use generic interface to simplify crashkernel reservation")
Signed-off-by: Chen Jiahao <chenjiahao16@huawei.com>
Link: https://lore.kernel.org/r/20230925024333.730964-1-chenjiahao16@huawei.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: Remove duplicate objcopy flag

There are two duplicate `-O binary` flags when objcopying from vmlinux
to Image/xipImage.

RISC-V set `-O binary` flag in both OBJCOPYFLAGS in the top-level riscv
Makefile and OBJCOPYFLAGS_* in the boot/Makefile, and the objcopy cmd
in Kbuild would join them together.

The `-O binary` flag is only needed for objcopying Image, so remove the
OBJCOPYFLAGS in the top-level riscv Makefile.

Fixes: c0fbcd991860 ("RISC-V: Build flat and compressed kernel images")
Signed-off-by: Song Shuai <songshuaishuai@tinylab.org>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230914091334.1458542-1-songshuaishuai@tinylab.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

x86/alternatives: Disable KASAN in apply_alternatives()

Fei has reported that KASAN triggers during apply_alternatives() on
a 5-level paging machine:

BUG: KASAN: out-of-bounds in rcu_is_watching()
Read of size 4 at addr ff110003ee6419a0 by task swapper/0/0
...
__asan_load4()
rcu_is_watching()
trace_hardirqs_on()
text_poke_early()
apply_alternatives()
...

On machines with 5-level paging, cpu_feature_enabled(X86_FEATURE_LA57)
gets patched. It includes KASAN code, where KASAN_SHADOW_START depends on
__VIRTUAL_MASK_SHIFT, which is defined with cpu_feature_enabled().

KASAN gets confused when apply_alternatives() patches the
KASAN_SHADOW_START users. A test patch that makes KASAN_SHADOW_START
static, by replacing __VIRTUAL_MASK_SHIFT with 56, works around the issue.

Fix it for real by disabling KASAN while the kernel is patching alternatives.

[ mingo: updated the changelog ]

Fixes: 6657fca06e3f ("x86/mm: Allow to boot without LA57 if CONFIG_X86_5LEVEL=y")
Reported-by: Fei Yang <fei.yang@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231012100424.1456-1-kirill.shutemov@linux.intel.com

Merge tag 'pinctrl-v6.6-2' of git://git./linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:
"Some pin control fixes for v6.6 which have been stacking up in my
  tree.

  Dmitry's fix to some locking in the core is the most substantial, that
  was a really neat fix.

  The rest is the usual assorted spray of minor driver fixes.

   - Drop some minor code causing warnings in the Lantiq driver

   - Fix out of bounds write in the Nuvoton driver

   - Fix lost IRQs with CONFIG_PM in the Starfive driver

   - Fix a locking issue in find_pinctrl()

   - Revert a regressive Tegra debug patch

   - Fix the Renesas RZN1 pin muxing"

* tag 'pinctrl-v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: renesas: rzn1: Enable missing PINMUX
  Revert "pinctrl: tegra: Add support to display pin function"
  pinctrl: avoid unsafe code pattern in find_pinctrl()
  pinctrl: starfive: jh7110: Add system pm ops to save and restore context
  pinctrl: starfive: jh7110: Fix failure to set irq after CONFIG_PM is enabled
  pinctrl: nuvoton: wpcm450: fix out of bounds write
  pinctrl: lantiq: Remove unsued declaration ltq_pinctrl_unregister()

workqueue: Use the kmem_cache_free() instead of kfree() to release pwq

Currently, the kfree() be used for pwq objects allocated with
kmem_cache_alloc() in alloc_and_link_pwqs(), this isn't wrong.
but usually, use "trace_kmem_cache_alloc/trace_kmem_cache_free"
to track memory allocation and free. this commit therefore use
kmem_cache_free() instead of kfree() in alloc_and_link_pwqs()
and also consistent with release of the pwq in rcu_free_pwq().

Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

workqueue: doc: Fix function and sysfs path errors

alloc_ordered_queue -> alloc_ordered_workqueue
/sys/devices/virtual/WQ_NAME/
-> /sys/devices/virtual/workqueue/WQ_NAME/

Signed-off-by: WangJinchao <wangjinchao@xfusion.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

cgroup: Fix incorrect css_set_rwsem reference in comment

Since commit f0d9a5f17575 ("cgroup: make css_set_rwsem a spinlock
and rename it to css_set_lock"), css_set_rwsem has been replaced by
css_set_lock. That commit, however, missed the css_set_rwsem reference
in include/linux/cgroup-defs.h. Fix that by changing it to css_set_lock
as well.

Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

ovl: fix regression in parsing of mount options with escaped comma

Ever since commit 91c77947133f ("ovl: allow filenames with comma"), the
following example was legit overlayfs mount options:

mount -t overlay overlay -o 'lowerdir=/tmp/a\,b/lower' /mnt

The conversion to new mount api moved to using the common helper
generic_parse_monolithic() and discarded the specialized ovl_next_opt()
option separator.

Bring back ovl_next_opt() and use vfs_parse_monolithic_sep() to fix the
regression.

Reported-by: Ryan Hendrickson <ryan.hendrickson@alum.mit.edu>
Closes: https://lore.kernel.org/r/8da307fb-9318-cf78-8a27-ba5c5a0aef6d@alum.mit.edu/
Fixes: 1784fbc2ed9c ("ovl: port to new mount api")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>

fs: factor out vfs_parse_monolithic_sep() helper

Factor out vfs_parse_monolithic_sep() from generic_parse_monolithic(),
so filesystems could use it with a custom option separator callback.

Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>

smb: client: prevent new fids from being removed by laundromat

Check if @cfid->time is set in laundromat so we guarantee that only
fully cached fids will be selected for removal. While we're at it,
add missing locks to protect access of @cfid fields in order to avoid
races with open_cached_dir() and cfids_laundromat_worker(),
respectively.

Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

smb: client: make laundromat a delayed worker

By having laundromat kthread processing cached directories on every
second turned out to be overkill, especially when having multiple SMB
mounts.

Relax it by using a delayed worker instead that gets scheduled on
every @dir_cache_timeout (default=30) seconds per tcon.

This also fixes the 1s delay when tearing down tcon.

Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

riscv: signal: fix sigaltstack frame size checking

The alternative stack checking in get_sigframe introduced by the Vector
support is not needed and has a problem. It is not needed as we have
already validate it at the beginning of the function if we are already
on an altstack. If not, the size of an altstack is always validated at
its allocation stage with sigaltstack_size_valid().

Besides, we must only regard the size of an altstack if the handler of a
signal is registered with SA_ONSTACK. So, blindly checking overflow of
an altstack if sas_ss_size not equals to zero will check against wrong
signal handlers if only a subset of signals are registered with
SA_ONSTACK.

Fixes: 8ee0b41898fa ("riscv: signal: Add sigcontext save/restore for vector")
Reported-by: Prashanth Swaminathan <prashanthsw@google.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Link: https://lore.kernel.org/r/20230822164904.21660-1-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

IXP4xx MAINTAINERS entries

Update MAINTAINERS entries for Intel IXP4xx SoCs.

Linus has been handling all IXP4xx stuff since 2019 or so.

Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Deepak Saxena <dsaxena@plexity.net>
Link: https://lore.kernel.org/r/m3ttqxu4ru.fsf@t19.piap.pl
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge branch 'rswitch-fix-issues-on-specific-conditions'

Yoshihiro Shimoda says:

====================
rswitch: Fix issues on specific conditions

This patch series fix some issues of rswitch driver on specific
condtions.
====================

Link: https://lore.kernel.org/r/20231010124858.183891-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

rswitch: Fix imbalance phy_power_off() calling

The phy_power_off() should not be called if phy_power_on() failed.
So, add a condition .power_count before calls phy_power_off().

Fixes: 5cb630925b49 ("net: renesas: rswitch: Add phy_power_{on,off}() calling")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

rswitch: Fix renesas_eth_sw_remove() implementation

Fix functions calling order and a condition in renesas_eth_sw_remove().
Otherwise, kernel NULL pointer dereference happens from phy_stop() if
a net device opens.

Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

drm/tiny: correctly print `struct resource *` on error

The `res` variable is already a `struct resource *`, don't take the address of it.

Fixes incorrect output:

simple-framebuffer 9e20dc000.framebuffer: [drm] *ERROR* could not acquire memory range [??? 0xffff4be88a387d00-0xfffffefffde0a240 flags 0x0]: -16

To be correct:

simple-framebuffer 9e20dc000.framebuffer: [drm] *ERROR* could not acquire memory range [mem 0x9e20dc000-0x9e307bfff flags 0x200]: -16

Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Fixes: 9a10c7e6519b ("drm/simpledrm: Add support for system memory framebuffers")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.3+
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231010174652.2439513-1-joey.gouly@arm.com

drm: Do not overrun array in drm_gem_get_pages()

If the shared memory object is larger than the DRM object that it backs,
we can overrun the page array. Limit the number of pages we install
from each folio to prevent this.

Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Link: https://lore.kernel.org/lkml/13360591.uLZWGnKmhe@natalenko.name/
Fixes: 3291e09a4638 ("drm: convert drm_gem_put_pages() to use a folio_batch")
Cc: stable@vger.kernel.org # 6.5.x
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231005135648.2317298-1-willy@infradead.org

octeontx2-pf: Fix page pool frag allocation warning

Since page pool param's "order" is set to 0, will result
in below warn message if interface is configured with higher
rx buffer size.

Steps to reproduce the issue.
1. devlink dev param set pci/0002:04:00.0 name receive_buffer_size \
   value 8196 cmode runtime
2. ifconfig eth0 up

[   19.901356] ------------[ cut here ]------------
[   19.901361] WARNING: CPU: 11 PID: 12331 at net/core/page_pool.c:567 page_pool_alloc_frag+0x3c/0x230
[   19.901449] pstate: 82401009 (Nzcv daif +PAN -UAO +TCO -DIT +SSBS BTYPE=--)
[   19.901451] pc : page_pool_alloc_frag+0x3c/0x230
[   19.901453] lr : __otx2_alloc_rbuf+0x60/0xbc [rvu_nicpf]
[   19.901460] sp : ffff80000f66b970
[   19.901461] x29: ffff80000f66b970 x28: 0000000000000000 x27: 0000000000000000
[   19.901464] x26: ffff800000d15b68 x25: ffff000195b5c080 x24: ffff0002a5a32dc0
[   19.901467] x23: ffff0001063c0878 x22: 0000000000000100 x21: 0000000000000000
[   19.901469] x20: 0000000000000000 x19: ffff00016f781000 x18: 0000000000000000
[   19.901472] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[   19.901474] x14: 0000000000000000 x13: ffff0005ffdc9c80 x12: 0000000000000000
[   19.901477] x11: ffff800009119a38 x10: 4c6ef2e3ba300519 x9 : ffff800000d13844
[   19.901479] x8 : ffff0002a5a33cc8 x7 : 0000000000000030 x6 : 0000000000000030
[   19.901482] x5 : 0000000000000005 x4 : 0000000000000000 x3 : 0000000000000a20
[   19.901484] x2 : 0000000000001080 x1 : ffff80000f66b9d4 x0 : 0000000000001000
[   19.901487] Call trace:
[   19.901488]  page_pool_alloc_frag+0x3c/0x230
[   19.901490]  __otx2_alloc_rbuf+0x60/0xbc [rvu_nicpf]
[   19.901494]  otx2_rq_aura_pool_init+0x1c4/0x240 [rvu_nicpf]
[   19.901498]  otx2_open+0x228/0xa70 [rvu_nicpf]
[   19.901501]  otx2vf_open+0x20/0xd0 [rvu_nicvf]
[   19.901504]  __dev_open+0x114/0x1d0
[   19.901507]  __dev_change_flags+0x194/0x210
[   19.901510]  dev_change_flags+0x2c/0x70
[   19.901512]  devinet_ioctl+0x3a4/0x6c4
[   19.901515]  inet_ioctl+0x228/0x240
[   19.901518]  sock_ioctl+0x2ac/0x480
[   19.901522]  __arm64_sys_ioctl+0x564/0xe50
[   19.901525]  invoke_syscall.constprop.0+0x58/0xf0
[   19.901529]  do_el0_svc+0x58/0x150
[   19.901531]  el0_svc+0x30/0x140
[   19.901533]  el0t_64_sync_handler+0xe8/0x114
[   19.901535]  el0t_64_sync+0x1a0/0x1a4
[   19.901537] ---[ end trace 678c0bf660ad8116 ]---

Fixes: b2e3406a38f0 ("octeontx2-pf: Add support for page pool")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com>
Link: https://lore.kernel.org/r/20231010034842.3807816-1-rkannoth@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

nfc: nci: assert requested protocol is valid

The protocol is used in a bit mask to determine if the protocol is
supported. Assert the provided protocol is less than the maximum
defined so it doesn't potentially perform a shift-out-of-bounds and
provide a clearer error for undefined protocols vs unsupported ones.

Fixes: 6a2968aaf50c ("NFC: basic NCI protocol implementation")
Reported-and-tested-by: syzbot+0839b78e119aae1fec78@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=0839b78e119aae1fec78
Signed-off-by: Jeremy Cline <jeremy@jcline.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231009200054.82557-1-jeremy@jcline.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

af_packet: Fix fortified memcpy() without flex array.

Sergei Trofimovich reported a regression [0] caused by commit a0ade8404c3b
("af_packet: Fix warning of fortified memcpy() in packet_getname().").

It introduced a flex array sll_addr_flex in struct sockaddr_ll as a
union-ed member with sll_addr to work around the fortified memcpy() check.

However, a userspace program uses a struct that has struct sockaddr_ll in
the middle, where a flex array is illegal to exist.

  include/linux/if_packet.h:24:17: error: flexible array member 'sockaddr_ll::<unnamed union>::<unnamed struct>::sll_addr_flex' not at end of 'struct packet_info_t'
     24 |                 __DECLARE_FLEX_ARRAY(unsigned char, sll_addr_flex);
        |                 ^~~~~~~~~~~~~~~~~~~~

To fix the regression, let's go back to the first attempt [1] telling
memcpy() the actual size of the array.

Reported-by: Sergei Trofimovich <slyich@gmail.com>
Closes: https://github.com/NixOS/nixpkgs/pull/252587#issuecomment-1741733002 [0]
Link: https://lore.kernel.org/netdev/20230720004410.87588-3-kuniyu@amazon.com/
Fixes: a0ade8404c3b ("af_packet: Fix warning of fortified memcpy() in packet_getname().")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20231009153151.75688-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

pinctrl: renesas: rzn1: Enable missing PINMUX

Enable pin muxing (eg. programmable function), so that the RZ/N1 GPIO
pins will be configured as specified by the pinmux in the DTS.

This used to be enabled implicitly via CONFIG_GENERIC_PINMUX_FUNCTIONS,
however that was removed, since the RZ/N1 driver does not call any of
the generic pinmux functions.

Fixes: 1308fb4e4eae14e6 ("pinctrl: rzn1: Do not select GENERIC_PIN{CTRL_GROUPS,MUX_FUNCTIONS}")
Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231004200008.1306798-1-ralph.siemsen@linaro.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

xfs: reinstate the old i_version counter as STATX_CHANGE_COOKIE

The handling of STATX_CHANGE_COOKIE was moved into generic_fillattr in
commit 0d72b92883c6 (fs: pass the request_mask to generic_fillattr), but
we didn't account for the fact that xfs doesn't call generic_fillattr at
all.

Make XFS report its i_version as the STATX_CHANGE_COOKIE.

Fixes: 0d72b92883c6 (fs: pass the request_mask to generic_fillattr)
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>

xfs: Remove duplicate include

./fs/xfs/scrub/xfile.c: xfs_format.h is included more than once.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=6209
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>

xfs: correct calculation for agend and blockcount

The agend should be "start + length - 1", then, blockcount should be
"end + 1 - start". Correct 2 calculation mistakes.

Also, rename "agend" to "range_agend" because it's not the end of the AG
per se; it's the end of the dead region within an AG's agblock space.

Fixes: 5cf32f63b0f4 ("xfs: fix the calculation for "end" and "length"")
Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>

Merge tag 'random-fixes-6.6_2023-10-11' of https://git./linux/kernel/git/djwong/xfs-linux into xfs-6.6-fixesD

xfs: random fixes for 6.6

Rollup of a couple of reviewed fixes.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'random-fixes-6.6_2023-10-11' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: process free extents to busy list in FIFO order
xfs: adjust the incore perag block_count when shrinking

net: tcp: fix crashes trying to free half-baked MTU probes

tcp_stream_alloc_skb() initializes the skb to use tcp_tsorted_anchor
which is a union with the destructor. We need to clean that
TCP-iness up before freeing.

Fixes: 736013292e3c ("tcp: let tcp_mtu_probe() build headless packets")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231010173651.3990234-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'ieee802154-for-net-2023-10-10' of git://git./linux/kernel/git/wpan/wpan

Stefan Schmidt says:

====================
pull-request: ieee802154 for net 2023-10-10

Just one small fix this time around.

Dinghao Liu fixed a potential use-after-free in the ca8210 driver probe
function.

* tag 'ieee802154-for-net-2023-10-10' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan:
ieee802154: ca8210: Fix a potential UAF in ca8210_probe
====================

Link: https://lore.kernel.org/r/20231010200943.82225-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

block: Don't invalidate pagecache for invalid falloc modes

Only call truncate_bdev_range() if the fallocate mode is supported. This
fixes a bug where data in the pagecache could be invalidated if the
fallocate() was called on the block device with an invalid mode.

Fixes: 25f4c41415e5 ("block: implement (some of) fallocate for block devices")
Cc: stable@vger.kernel.org
Reported-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Sarthak Kukreti <sarthakkukreti@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Fixes: line? I've never seen those wrapped.
Link: https://lore.kernel.org/r/20231011201230.750105-1-sarthakkukreti@chromium.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'fs_for_v6.6-rc6' of git://git./linux/kernel/git/jack/linux-fs

Pull quota regression fix from Jan Kara.

* tag 'fs_for_v6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: Fix slow quotaoff

Merge tag 'for-6.6-rc5-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
"A revert of recent mount option parsing fix, this breaks mounts with
  security options.

  The second patch is a flexible array annotation"

* tag 'for-6.6-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: add __counted_by for struct btrfs_delayed_item and use struct_size()
  Revert "btrfs: reject unknown mount options early"

Merge tag 'ata-6.6-rc6' of git://git./linux/kernel/git/dlemoal/libata

Pull ata fixes from Damien Le Moal:

- Three fixes for the pata_parport driver to address a typo in the
   code, a missing operation implementation and port reset handling in
   the presence of slave devices (Ondrej)

- Fix handling of ATAPI devices reset with the fit3 protocol driver of
   the pata_parport driver (Ondrej)

- A follow up fix for the recent suspend/resume corrections to avoid
   attempting rescanning on resume the scsi device associated with an
   ata disk when the request queue of the scsi device is still suspended
   (in addition to not doing the rescan if the scsi device itself is
   still suspended) (me)

* tag 'ata-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  scsi: Do not rescan devices with a suspended queue
  ata: pata_parport: fit3: implement IDE command set registers
  ata: pata_parport: add custom version of wait_after_reset
  ata: pata_parport: implement set_devctl
  ata: pata_parport: fix pata_parport_devchk

Merge tag 'for-linus-2023101101' of git://git./linux/kernel/git/hid/hid

Pull HID fixes from Benjamin Tissoires:

- regression fix for i2c-hid when used on DT platforms (Johan Hovold)

- kernel crash fix on removal of the Logitech USB receiver (Hans de
   Goede)

* tag 'for-linus-2023101101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: logitech-hidpp: Fix kernel crash on receiver USB disconnect
  HID: i2c-hid: fix handling of unpopulated devices

Merge tag 'printk-for-6.6-rc6' of git://git./linux/kernel/git/printk/linux

Pull printk regression fix from Petr Mladek:

- Avoid unnecessary wait and try to flush messages before checking
pending ones

* tag 'printk-for-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: flush consoles before checking progress

xfs: process free extents to busy list in FIFO order

When we're adding extents to the busy discard list, add them to the tail
of the list so that we get FIFO order. For FITRIM commands, this means
that we send discard bios sorted in order from longest to shortest, like
we did before commit 89cfa899608fc.

For transactions that are freeing extents, this puts them in the
transaction's busy list in FIFO order as well, which shouldn't make any
noticeable difference.

Fixes: 89cfa899608fc ("xfs: reduce AGF hold times during fstrim operations")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>

xfs: adjust the incore perag block_count when shrinking

If we reduce the number of blocks in an AG, we must update the incore
geometry values as well.

Fixes: 0800169e3e2c9 ("xfs: Pre-calculate per-AG agbno geometry")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>

media: i2c: ov8858: Don't set fwnode in the driver

This makes the driver work with the new check in
v4l2_async_register_subdev() that was introduced recently in 6.6-rc1.
Without this change, probe fails with:

ov8858 1-0036: Detected OV8858 sensor, revision 0xb2
ov8858 1-0036: sub-device fwnode is an endpoint!
ov8858 1-0036: v4l2 async register subdev failed
ov8858: probe of 1-0036 failed with error -22

This also simplifies the driver a bit.

Signed-off-by: Ondrej Jirman <megi@xff.cz>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: ipu-bridge: Add missing acpi_dev_put() in ipu_bridge_get_ivsc_acpi_dev()

In ipu_bridge_get_ivsc_acpi_dev(), the "ivsc_adev" acpi_device pointer
from the outer loop is handed over to the caller, which takes proper
care of its reference count.
However, the "consumer" acpi_device pointer from the inner loop is lost,
without decrementing its reference count.

Fix this by adding the missing call to acpi_dev_put().

Fixes: c66821f381ae ("media: pci: intel: Add IVSC support for IPU bridge driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: xilinx-vipp: Look for entities also in waiting_list

The big V4L2 async framework overhaul simplified linked lists used by the
V4L2 async framework. This affected a few drivers and it turns out a few
of those drivers rely on searching for entities in both async notifier's
waiting and done lists. Do that by separately traversing both.

Fixes: 9bf19fbf0c8b ("media: v4l: async: Rework internal lists")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: subdev: Don't report V4L2_SUBDEV_CAP_STREAMS when the streams API is disabled

Since the stream API is still experimental it is currently locked away
behind the internal, default disabled, v4l2_subdev_enable_streams_api flag.

Advertising V4L2_SUBDEV_CAP_STREAMS when the streams API is disabled
confuses userspace. E.g. it causes the following libcamera error:

ERROR SimplePipeline simple.cpp:1497 Failed to reset routes for
/dev/v4l-subdev1: Inappropriate ioctl for device

Don't report V4L2_SUBDEV_CAP_STREAMS when the streams API is disabled
to avoid problems like this.

Reported-by: Dennis Bonke <admin@dennisbonke.com>
Fixes: 9a6b5bf4c1bb ("media: add V4L2_SUBDEV_CAP_STREAMS")
Cc: stable@vger.kernel.org # for >= 6.3
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

cpu-hotplug: Provide prototypes for arch CPU registration

Provide common prototypes for arch_register_cpu() and
arch_unregister_cpu(). These are called by acpi_processor.c, with weak
versions, so the prototype for this is already set. It is generally not
necessary for function prototypes to be conditional on preprocessor macros.

Some architectures (e.g. Loongarch) are missing the prototype for this, and
rather than add it to Loongarch's asm/cpu.h, do the job once for everyone.

Since this covers everyone, remove the now unnecessary prototypes in
asm/cpu.h, and therefore remove the 'static' from one of ia64's
arch_register_cpu() definitions.

[ tglx: Bring back the ia64 part and remove the ACPI prototypes ]

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/E1qkoRr-0088Q8-Da@rmk-PC.armlinux.org.uk

Merge branch 'rework/misc-cleanups' into for-linus

usb: typec: ucsi: Use GET_CAPABILITY attributes data to set power supply scope

On some OEM systems, adding a W7900 dGPU triggers RAS errors and hangs
at a black screen on startup.  This issue occurs only if `ucsi_acpi` has
loaded before `amdgpu` has loaded.  The reason for this failure is that
`amdgpu` uses power_supply_is_system_supplied() to determine if running
on AC or DC power at startup. If this value is reported incorrectly the
dGPU will also be programmed incorrectly and trigger errors.

power_supply_is_system_supplied() reports the wrong value because UCSI
power supplies provided as part of the system don't properly report the
scope as "DEVICE" scope (not powering the system).

In order to fix this issue check the capabilities reported from the UCSI
power supply to ensure that it supports charging a battery and that it can
be powered by AC.  Mark the scope accordingly.

Cc: stable@vger.kernel.org
Fixes: a7fbfd44c020 ("usb: typec: ucsi: Mark dGPUs as DEVICE scope")
Link: https://www.intel.com/content/www/us/en/products/docs/io/universal-serial-bus/usb-type-c-ucsi-spec.html
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20231009184643.129986-1-mario.limonciello@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: ucsi: Fix missing link removal

The link between the partner device and its USB Power
Delivery instance was never removed which prevented the
device from being released. Removing the link always when
the partner is unregistered.

Fixes: b04e1747fbcc ("usb: typec: ucsi: Register USB Power Delivery Capabilities")
Cc: stable <stable@kernel.org>
Reported-by: Douglas Gilbert <dgilbert@interlog.com>
Closes: https://lore.kernel.org/linux-usb/ZSUMXdw9nanHtnw2@kuha.fi.intel.com/
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20231010141749.3912016-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: altmodes/displayport: Signal hpd low when exiting mode

Upon receiving an ACK for a sent EXIT_MODE message, the DisplayPort
driver currently resets the status and configuration of the port partner.
The hpd signal is not updated despite being part of the status, so the
Display stack can still transmit video despite typec_altmode_exit placing
the lanes in a Safe State.

Set hpd to low when a sent EXIT_MODE message is ACK'ed.

Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20231009210057.3773877-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: add __counted_by for struct btrfs_delayed_item and use struct_size()

Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).

While there, use struct_size() helper, instead of the open-coded
version, to calculate the size for the allocation of the whole
flexible structure, including of course, the flexible-array member.

This code was found with the help of Coccinelle, and audited and
fixed manually.

Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

net/smc: Fix pos miscalculation in statistics

SMC_STAT_PAYLOAD_SUB(_smc_stats, _tech, key, _len, _rc) will calculate
wrong bucket positions for payloads of exactly 4096 bytes and
(1 << (m + 12)) bytes, with m == SMC_BUF_MAX - 1.

Intended bucket distribution:
Assume l == size of payload, m == SMC_BUF_MAX - 1.

Bucket 0 : 0 < l <= 2^13
Bucket n, 1 <= n <= m-1 : 2^(n+12) < l <= 2^(n+13)
Bucket m : l > 2^(m+12)

Current solution:
_pos = fls64((l) >> 13)
[...]
_pos = (_pos < m) ? ((l == 1 << (_pos + 12)) ? _pos - 1 : _pos) : m

For l == 4096, _pos == -1, but should be _pos == 0.
For l == (1 << (m + 12)), _pos == m, but should be _pos == m - 1.

In order to avoid special treatment of these corner cases, the
calculation is adjusted. The new solution first subtracts the length by
one, and then calculates the correct bucket by shifting accordingly,
i.e. _pos = fls64((l - 1) >> 13), l > 0.
This not only fixes the issues named above, but also makes the whole
bucket assignment easier to follow.

Same is done for SMC_STAT_RMB_SIZE_SUB(_smc_stats, _tech, k, _len),
where the calculation of the bucket position is similar to the one
named above.

Fixes: e0e4b8fa5338 ("net/smc: Add SMC statistics support")
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Nils Hoppmann <niho@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>