drm/sun4i: Add support for variants to DW HDMI PHY

There are multiple variants of DW HDMI PHYs in Allwinner SoCs. While
some things like clock and reset setup are the same, PHY configuration
differs a lot.

Split out code which is PHY specific to separate functions and create
a structure which holds pointers to those functions.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180301213442.16677-11-jernej.skrabec@siol.net

drm/sun4i: Fix polarity configuration for DW HDMI PHY

Current polarity configuration code is cleary wrong since it compares
same flag two times. However, even if flag name is fixed, it won't work
well for resolutions which have one polarity positive and another
negative.

Fix that by properly set each bit according to each polarity. Since
those two bits are not described in any documentation, relationships
were obtained by experimentation.

Fixes: b7c7436a5ff0 ("drm/sun4i: Implement A83T HDMI driver")

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180301213442.16677-10-jernej.skrabec@siol.net

drm/sun4i: Add support for H3 mixer 0

This mixer supports 1 VI plane, 3 UI plane and HW scaling on all planes.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180301213442.16677-9-jernej.skrabec@siol.net

drm/sun4i: Add support for H3 display engine

H3 display engine has two mixers which are connected to HDMI and TV
output.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180301213442.16677-8-jernej.skrabec@siol.net

dt-bindings: display: sun4i-drm: Add compatibles for H3 HDMI pipeline

Add missing compatibles for H3 HDMI pipeline. These compatibles can also
be used with H5 SoC.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180301213442.16677-6-jernej.skrabec@siol.net

drm/rockchip: analogix_dp: reorder psr_unregister call in unbind

In bind the psr handler gets registered first before the core
analogix_dp_bind() gets called. So it should be the other way
around in unbind, first unbind the analogix_dp and then
unregister the psr.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/76025075.yWNtk1v57f@phil

drm/rockchip: analogix_dp: Add a sanity check for rockchip_drm_psr_register()

The rockchip_drm_psr_register() can fail, so add a sanity check for that.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
[moved psr_unregister reordering in unbind to separate patch]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180110162348.22765-4-thierry.escande@collabora.com

drm/bridge: analogix_dp: Fix connector and encoder cleanup

Since we are initing connector in the core driver and encoder in the
plat driver, let's clean them up in the right places.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180110162348.22765-3-thierry.escande@collabora.com

drm/bridge: analogix: Do not use device's drvdata

The driver that instantiates the bridge should own the drvdata, as all
driver model callbacks (probe, remove, shutdown, PM ops, etc.) are also
owned by its driver struct. Moreover, storing two different pointer
types in driver data depending on driver initialization status is barely
a good practice and in fact has led to many bugs in this driver.

Let's clean up this mess and change Analogix entry points to simply
accept some opaque struct pointer, adjusting their users at the same
time to avoid breaking the compilation.

Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Acked-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180110162348.22765-2-thierry.escande@collabora.com

drm/rockchip: vop: Init vskiplines in scl_vop_cal_scale()

Currently we are calling scl_vop_cal_scale() to get vskiplines for yrgb
and cbcr. So the cbcr's vskiplines might be an unexpected value if the
second scl_vop_cal_scale() didn't update it.

Init vskiplines in scl_vop_cal_scale() to avoid that.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180223062250.10470-1-jeffy.chen@rock-chips.com

drm/rockchip: Add device links for master and components

Since we are trying to access components' resources in the master's
suspend/resume PM callbacks(e.g. panel), add device links to correct
the suspend/resume and shutdown ordering.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180207175309.21095-1-enric.balletbo@collabora.com

tinydrm: add backlight dependency

Calling devm_of_find_backlight directly means we get a link failure
without CONFIG_BACKLIGHT_CLASS_DEVICE:

drivers/gpu/drm/tinydrm/mi0283qt.o: In function `mi0283qt_probe':
mi0283qt.c:(.text+0x684): undefined reference to `devm_of_find_backlight'

This adds an explicit Kconfig dependency for it. While I did not
observe that failure for st7735r, I assume the same change is needed
there for the same reason.

Fixes: d1a2e7004b5e ("drm/tinydrm: Replace tinydrm_of_find_backlight with of_find_backlight")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180228134111.2042877-1-arnd@arndb.de

drm/uapi: The ctm matrix uses sign-magnitude representation

The documentation for the ctm matrix suggests a two's complement
format, but at least the i915 implementation is using sign-magnitude
instead. And looks like malidp is doing the same. Change the docs
to match the current implementation, and change the type from __s64
to __u64 to drive the point home.

Cc: dri-devel@lists.freedesktop.org
Cc: Mihail Atanassov <mihail.atanassov@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Cc: Johnson Lin <johnson.lin@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180222214232.6064-1-ville.syrjala@linux.intel.com
Reviewed-by: Harry Wentland <harry.wentland@amd.com>

drm/virtio: Add spaces around operators

This patch fixes the checkpatch.pl check:

virtgpu_ioctl.c:535: CHECK: spaces preferred around that '|' (ctx:VxV)
virtgpu_vq.c:277: CHECK: spaces preferred around that '+' (ctx:VxV)
...

Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/8402b55696b44483ba2e1f6aaeb53bf709ffbfe7.1519343668.git.rodrigosiqueiramelo@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/virtio: Remove multiple blank lines

This patch fixes the checkpatch.pl check:

virtgpu_drv.c:116: CHECK: Please don't use multiple blank lines
virtgpu_vq.c:599: CHECK: Please don't use multiple blank lines
virtgpu_prime.c:42: CHECK: Please don't use multiple blank lines

Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/c43a006f2ed93a16fe824b4a2686a2d5e2ef56f5.1519343668.git.rodrigosiqueiramelo@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/virtio: Replace 'unsigned' for 'unsigned int'

This patch fixes the checkpatch.pl warning:

drivers/gpu/drm/virtio/virtgpu_display.c:64: WARNING: Prefer 'unsigned
int' to bare use of 'unsigned'
...

Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/ac9c4110785e6519801d44c57d4f05c3e0cdad53.1519343668.git.rodrigosiqueiramelo@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/virtio: Remove return from void function

This patch fixes the checkpatch.pl warning:

virtgpu_ttm.c:181: WARNING: void function return statements are not
generally useful
...

Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/fd8dc6599c81c7aec6753c8552c1cabb7baa7577.1519343668.git.rodrigosiqueiramelo@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/virtio: Add */ in block comments to separate line

This patch fixes the checkpatch.pl warning:

virtgpu_ioctl.c:551: WARNING: Block comments use a trailing */ on a
separate line
...

Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/f0bd4104a7d26bf7561c3a2b4632041c5411f1f2.1519343668.git.rodrigosiqueiramelo@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/virtio: Add blank line after variable declarations

This patch fixes the checkpatch.pl warnings:

virtgpu_drv.c:57: WARNING: Missing a blank line after declarations
virtgpu_display.c:99: WARNING: Missing a blank line after declarations
...

Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/41767852ff9dc584c825e32db6222b9a311603b9.1519343668.git.rodrigosiqueiramelo@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/virtio: Add tabs at the start of a line

This patch fixes the checkpatch.pl errors:

drivers/gpu/drm/virtio/virtgpu_drv.h:371: ERROR: code indent should use
tabs where possible
...

Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1c77c233d4454ee2bdb85beaf17d413e310fac0a.1519343668.git.rodrigosiqueiramelo@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm: Include the header with the prototype for drm_get_panel_orientation_quirk()

sparse complains:
drivers/gpu/drm/drm_panel_orientation_quirks.c:133:5: warning: symbol 'drm_get_panel_orientation_quirk' was not declared. Should it be static?

Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180226142423.26439-1-ville.syrjala@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>

drm/i915: Remove the pipe/plane ID checks from skl_check_ccs_aux_surface()

The core now checks that the plane supports the fb's format+modifier
combination, so we can drop the related checks from
skl_check_ccs_aux_surface(). These checks were specific to
SKL/KBL/BXT anyway.

Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Stone <daniels@collabora.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171222192231.17981-9-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>

drm: Check that the plane supports the request format+modifier combo

Currently we only check that the plane supports the pixel format of the
fb we're about to feed to it. Extend it to check also the modifier, and
more specifically that the combination of the format and modifier is
supported.

Cc: dri-devel@lists.freedesktop.org
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Stone <daniels@collabora.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171222192231.17981-8-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/pl111: Remove reverse dependency on DRM_DUMB_VGA_DAC

DRM_DUMB_VGA_DAC is a user-visible symbol. Selecting it can cause unmet
direct dependencies such as this (on i386, randconfig):

warning: (DRM_PL111) selects DRM_DUMB_VGA_DAC which has unmet direct dependencies (HAS_IOMEM && DRM && DRM_BRIDGE && OF)

This is because DRM_DUMB_VGA_DAC depends on OF while DRM_PL111 does not.
It does indirectly depend on OF via the ARM and ARM64 dependencies, but
since it can also be enabled under COMPILE_TEST, randconfig can find a
case where DRM_PL111 is selected without pulling in OF and not meeting
the dependency for DRM_DUMB_VGA_DAC.

Since select is "heavy handed", DRM_DUMB_VGA_DAC is going to be enabled
regardless of the above warning and causes the following build error:

../drivers/gpu/drm/bridge/dumb-vga-dac.c: In function 'dumb_vga_probe':
../drivers/gpu/drm/bridge/dumb-vga-dac.c:207:13: error: 'struct drm_bridge' has no member named 'of_node'
  vga->bridge.of_node = pdev->dev.of_node;

See Documentation/kbuild/kconfig-language.txt, "reverse dependencies".

Fixes: 49f81d80ab84 ("drm/pl111: Support handling bridge timings")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Archit Taneja <archit@cradlewise.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180220102903.27787-1-thierry.reding@gmail.com

drm/stm: check pitch and size calculations even if !CONFIG_MMU

In all cases we have to check pitch and size calculations to speed up
data transfer.

Fixes: 21f815bf773c ("drm/stm: drv: Improve data transfers")

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180131080508.14356-1-benjamin.gaignard@linaro.org

drm/panel: Fix ARM Versatile panel clocks

These clocks are in kHz not in Hz, oops. Fix it so my
new bandwidth calculations patch starts working with these
panels.

Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180211103840.18764-1-linus.walleij@linaro.org

drm/pl111: Do not use deprecated drm_driver.{enable|disable)_vblank

Do not use deprecated drm_driver.{enable|disable)_vblank callbacks,
but use drm_simple_kms_helpe's pipe callbacks instead.

Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Tested-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1518425574-32671-5-git-send-email-andr2000@gmail.com

drm/tve200: Do not use deprecated drm_driver.{enable|disable)_vblank

Do not use deprecated drm_driver.{enable|disable)_vblank callbacks,
but use drm_simple_kms_helpe's pipe callbacks instead.

Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1518425574-32671-4-git-send-email-andr2000@gmail.com

drm/mxsfb: Do not use deprecated drm_driver.{enable|disable)_vblank

Do not use deprecated drm_driver.{enable|disable)_vblank callbacks,
but use drm_simple_kms_helpe's pipe callbacks instead.

Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: Marek Vasut <marex@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1518425574-32671-3-git-send-email-andr2000@gmail.com

drm/simple_kms_helper: Add {enable|disable}_vblank callback support

If simple_kms_helper based driver needs to work with vblanks,
then it has to provide drm_driver.{enable|disable}_vblank callbacks,
because drm_simple_kms_helper.drm_crtc_funcs does not provide any.
At the same time drm_driver.{enable|disable}_vblank callbacks
are marked as deprecated and shouldn't be used by new drivers.

Fix this by extending drm_simple_kms_helper.drm_crtc_funcs
to provide the missing callbacks.

Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1518425574-32671-2-git-send-email-andr2000@gmail.com

drm: fix drm_get_max_iomem type mismatch

When comparing two variables with min()/max(), they should be the same type:

drivers/gpu/drm/drm_memory.c: In function 'drm_get_max_iomem':
include/linux/kernel.h:821:16: error: comparison of distinct pointer types lacks a cast [-Werror]
  (void) (&max1 == &max2);

This makes the local variable in drm_get_max_iomem make the type
from resource->end.

Fixes: 82626363a217 ("drm: add func to get max iomem address v2")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180222114804.1394300-1-arnd@arndb.de

drm/simple_kms_helper: Fix NULL pointer dereference with no active CRTC

It is possible that drm_simple_kms_plane_atomic_check called
with no CRTC set, e.g. when user-space application sets CRTC_ID/FB_ID
to 0 before doing any actual drawing. This leads to NULL pointer
dereference because in this case new CRTC state is NULL and must be
checked before accessing.

Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1519279759-7803-1-git-send-email-andr2000@gmail.com

drm/sun4i: backend: Remove ARGB spoofing

We've had some code for quite some time to prevent the alpha bug from
happening on the lowest primary plane. Since we now check for this in our
atomic_check, we can simply remove it.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/965180afd8169ccaa848f061d16a2c1a9ec4d289.1518802627.git-series.maxime.ripard@bootlin.com

drm/sun4i: backend: Make zpos configurable

Now that we have everything in place, we can make zpos configurable now.
Change the zpos property from an immutable one to a regular.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0ab187956855db86972d936e6751181649e0d035.1518802627.git-series.maxime.ripard@bootlin.com

drm/sun4i: Remove the plane description structure

The plane description structure was mostly needed to differentiate the
formats usable on the primary plane (because of its lowest position), and
assign the pipes. Now that both are dynamically checked and assigned, we
can remove the static definition.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6b09e3698e692c3338f70a5ae1e5a580f9dd08ee.1518802627.git-series.maxime.ripard@bootlin.com

drm/sun4i: backend: Assign the pipes automatically

Since we now have a way to enforce the zpos, check for the number of alpha
planes, the only missing part is to assign our pipe automatically instead
of hardcoding it.

The algorithm is quite simple, but requires two iterations over the list of
planes.

In the first one (which is the same one that we've had to check for alpha,
the frontend usage, and so on), we order the planes by their zpos.

We can then do a second iteration over that array by ascending zpos
starting with the pipe 0. When and if we encounter our alpha plane, we put
it and all the other subsequent planes in the second pipe.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e9caf21d831438d36a3ccc7cef229c9a7ea7f69f.1518802627.git-series.maxime.ripard@bootlin.com

drm/mm: Fix caching of leftmost node in the interval tree

When we descend the tree to find our slot, if we step to the right, we
are no longer the leftmost node.

Fixes: f808c13fd373 ("lib/interval_tree: fast overlap detection")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Christian König <christian.koenig@amd.com> for now.
Link: https://patchwork.freedesktop.org/patch/msgid/20180220093738.1461-1-chris@chris-wilson.co.uk

drm/omapdrm: Use of_find_backlight helper

Replace of_find_backlight_by_node and of the code around it
with of_find_backlight helper to avoid repetition of code.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Meghana Madhyastha <meghana.madhyastha@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/eb914313f9d0e58d81572ccd3c718a573a891bd7.1516810726.git.meghana.madhyastha@gmail.com

drm/panel: Use of_find_backlight helper

Replace of_find_backlight_by_node and of the code around it
with of_find_backlight helper to avoid repetition of code.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Meghana Madhyastha <meghana.madhyastha@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/140d01afb138d687680b2d1776a4c101c9fa9a0a.1516810725.git.meghana.madhyastha@gmail.com

drm/omapdrm: Use backlight_enable/disable helpers

Use backlight_enable/disable helpers instead of changing
the property and calling backlight_update_status for cleaner
and simpler code and also to avoid repetitions.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Meghana Madhyastha <meghana.madhyastha@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/30d5b26c3c7d75de3d2ab3cff9dee67084fc3caf.1516810725.git.meghana.madhyastha@gmail.com

drm/panel: Use backlight_enable/disable helpers

Use backlight_enable/disable helpers instead of changing
the property and calling backlight_update_status for cleaner
and simpler code and also to avoid repetitions.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Meghana Madhyastha <meghana.madhyastha@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/bc80cdb5cf1a6638dce9fb9f8da674e361e3b749.1516810725.git.meghana.madhyastha@gmail.com

drm/tinydrm: Call devres version of of_find_backlight

Call devm_of_find_backlight (the devres version) instead of
of_find_backlight.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Meghana Madhyastha <meghana.madhyastha@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/244cd4d567cb3944a8cb7633715ffc8ac4e1ce83.1516810725.git.meghana.madhyastha@gmail.com

drm/tinydrm: Replace tinydrm_of_find_backlight with of_find_backlight

Remove tinydrm_of_find_backlight from tinydrm-helpers.c. We now have
a generic of_find_backlight defined in backlight.c. Let the callers
of tinydrm_of_find_backlight call of_find_backlight. Also, remove
select BACKLIGHT_LCD_SUPPORT and select BACKLIGHT_CLASS_DEVICE from
tinydrm/Kconfig as it is a hack that is no longer needed.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Meghana Madhyastha <meghana.madhyastha@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/11dd1cabd098a730d07ab04c5987b139d14d8b21.1516810725.git.meghana.madhyastha@gmail.com

drm/tinydrm: Convert tinydrm_enable/disable_backlight to backlight_enable/disable

Remove tinydrm_enable/disable_backlight and let the callers call the
more generic backlight_enable/disable helpers

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Meghana Madhyastha <meghana.madhyastha@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/ec700724e47814e6426966e093bd32b2364ba147.1516810725.git.meghana.madhyastha@gmail.com

Merge tag 'topic/backlight_for_lag-2018-01-29' of git://anongit.freedesktop.org/drm/drm-misc into drm-misc-next

This contains the backlight portion of Meghana Madhyastha's patch set to
migrate the backlight helpers from tinydrm to the backlight subsystem.

https://patchwork.freedesktop.org/series/36522/

Cc: Meghana Madhyastha <meghana.madhyastha@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
# gpg: Signature made Mon 29 Jan 2018 02:25:40 PM EST
# gpg:                using RSA key 7F17297CC4A076740CB3E42A96F70DFDA84A070A
# gpg: Good signature from "Sean Paul <seanpaul@chromium.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 1C5E AB9E D7C9 DDE9 E7F2  087C 732C 0025 72DC AF79
#      Subkey fingerprint: 7F17 297C C4A0 7674 0CB3  E42A 96F7 0DFD A84A 070A
Link: https://patchwork.freedesktop.org/patch/msgid/20180129192950.bvmhkz3h42t5a25r@art_vandelay

drm: add documentation for tv connector state margins

A bit boring documentation fix, but gets rid of the warnings:

./include/drm/drm_connector.h:370: warning: Function parameter or member 'margins.left' not described in 'drm_tv_connector_state'
./include/drm/drm_connector.h:370: warning: Function parameter or member 'margins.right' not described in 'drm_tv_connector_state'
./include/drm/drm_connector.h:370: warning: Function parameter or member 'margins.top' not described in 'drm_tv_connector_state'
./include/drm/drm_connector.h:370: warning: Function parameter or member 'margins.bottom' not described in 'drm_tv_connector_state'

[Depends on fe7bc493d979 ("scripts: kernel-doc: support in-line comments
on nested structs/unions") in docs-next to actually fix the warnings.]

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180219104009.4887-1-jani.nikula@intel.com

drm/doc: Use new substruct support

Support for this just recently landed in linux-next.

Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180219225356.24996-5-daniel.vetter@ffwll.ch

drm/doc: Polish for drm_mode_parse_command_line_for_connector

Quoting the module option format looks soo much nicer, and avoids
sphinx spewing errors about markup issues.

v2: Fix typo in commit message (Thierry).

Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180219225356.24996-4-daniel.vetter@ffwll.ch

drm/docs: Document "scaling mode" property better

Move it out of the csv dungeon.

While at it add the missing link to the helper functions for setting
up the "panel rotation" property.

Also OCD how we list enum property values and their corresponding docs.
Going for a nest definition list seams cleanest, no need for also making
it an uordered list.

Cc: Sean Paul <seanpaul@chromium.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180219225356.24996-3-daniel.vetter@ffwll.ch

drm/docs: Align layout of optional plane blending properties

Just a bit of drive-by OCD. All the other property docs use enumerations,
for some nice visual consistency. It also neatly highlights the property
name.

Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180219225356.24996-2-daniel.vetter@ffwll.ch

drm/docs: Discourage adding more to kms-properties.csv

Motivated by patch review.

The table is really hard to read in source form, hard to edit, and
we've moved away to more focused sections about specific features and
how they're exposed in properties.

Those sections can then more easily enumerate options, link to helper
functions and other parts of the docs. All things that get ugly real
fast in the docs.

Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180219225356.24996-1-daniel.vetter@ffwll.ch

drm: simple_kms_helper: Add mode_valid() callback support

The PL111 needs to filter valid modes based on memory bandwidth.
I guess it is a pretty simple operation, so we can still claim
the DRM KMS helper pipeline is simple after adding this (optional)
vtable callback.

Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180220072859.3386-1-linus.walleij@linaro.org

drm/todo: Add idr_init_base todo

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180219145708.23523-1-daniel.vetter@ffwll.ch

drm: Use idr_init_base(1) when using id==0 for invalid

Use the new idr_init_base() function to create an IDR that knows id==0
is never allocated as it maps to an invalid identifier. By knowing that
id==0 is invalid, the IDR can start from id=1 instead avoiding the issue
of having to start each lookup from the zeroth leaf as id==0 is always
unused (and thus the tree-of-bitmaps indicate that is the first
available).

References: 6ce711f27500 ("idr: Make 1-based IDRs more efficient")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Christian Konig <christian.koenig@amd.com>
Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Christian König <christian.koenig@amd.com> as well.
Link: https://patchwork.freedesktop.org/patch/msgid/20180212145533.30046-1-chris@chris-wilson.co.uk

drm: NULL pointer dereference [null-pointer-deref] (CWE 476) problem

The Parfait (version 2.1.0) static code analysis tool found the
following NULL pointer derefernce problem.

- drivers/gpu/drm/drm_edid.c
The call to drm_cvt_mode() in function drm_mode_std() for the
HDTV hack resulted in the possibility of accessing a NULL pointer
if drm_mode_std() returned NULL.  A check for this added right after
the call to drm_cvt_mode() in this particular area of code.

Signed-off-by: Joe Moriarty <joe.moriarty@oracle.com>
Reviewed-by: Steven Sistare <steven.sistare@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180212195144.98323-4-joe.moriarty@oracle.com

drm: NULL pointer dereference [null-pointer-deref] (CWE 476) problem

The Parfait (version 2.1.0) static code analysis tool found the
following NULL pointer derefernce problem.

- drivers/gpu/drm/drm_dp_mst_topology.c
The call to drm_dp_calculate_rad() in function drm_dp_port_setup_pdt()
could result in a NULL pointer being returned to port->mstb due to a
failure to allocate memory for port->mstb.

Signed-off-by: Joe Moriarty <joe.moriarty@oracle.com>
Reviewed-by: Steven Sistare <steven.sistare@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180212195144.98323-3-joe.moriarty@oracle.com

dma-buf/sw_sync: Fix kerneldoc warnings

drivers/dma-buf/sw_sync.c:248: warning: No description found for parameter 'obj'
drivers/dma-buf/sw_sync.c:248: warning: No description found for parameter 'value'
drivers/dma-buf/sw_sync.c:248: warning: Excess function parameter 'parent' description in 'sync_pt_create'
drivers/dma-buf/sw_sync.c:248: warning: Excess function parameter 'inc' description in 'sync_pt_create'

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180208113816.8288-1-chris@chris-wilson.co.uk

drm: Fix kerneldoc warnings for drm_lease

drivers/gpu/drm/drm_lease.c:56: warning: No description found for parameter 'lessee_id'
drivers/gpu/drm/drm_lease.c:56: warning: Excess function parameter 'id' description in '_drm_find_lessee'
drivers/gpu/drm/drm_lease.c:114: warning: No description found for parameter 'file_priv'
drivers/gpu/drm/drm_lease.c:114: warning: Excess function parameter 'master' description in '_drm_lease_held'
drivers/gpu/drm/drm_lease.c:134: warning: No description found for parameter 'file_priv'
drivers/gpu/drm/drm_lease.c:134: warning: Excess function parameter 'master' description in 'drm_lease_held'
drivers/gpu/drm/drm_lease.c:158: warning: No description found for parameter 'crtcs_in'
drivers/gpu/drm/drm_lease.c:158: warning: Excess function parameter 'crtcs' description in 'drm_lease_filter_crtcs'
drivers/gpu/drm/drm_lease.c:311: warning: No description found for parameter 'top'
drivers/gpu/drm/drm_lease.c:311: warning: Excess function parameter 'master' description in '_drm_lease_revoke'
drivers/gpu/drm/drm_lease.c:494: warning: No description found for parameter 'lessor_priv'
drivers/gpu/drm/drm_lease.c:494: warning: Excess function parameter 'file_priv' description in 'drm_mode_create_lease_ioctl'
drivers/gpu/drm/drm_lease.c:672: warning: No description found for parameter 'lessee_priv'
drivers/gpu/drm/drm_lease.c:672: warning: Excess function parameter 'file_priv' description in 'drm_mode_get_lease_ioctl'
drivers/gpu/drm/drm_lease.c:733: warning: No description found for parameter 'lessor_priv'
drivers/gpu/drm/drm_lease.c:733: warning: Excess function parameter 'file_priv' description in 'drm_mode_revoke_lease_ioctl'

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180208110817.30057-1-chris@chris-wilson.co.uk

drm/bochs: make structure bochs_bo_driver static

The structure bochs_bo_driver is local to the source and does not need to
be in global scope, so make it static.

Cleans up sparse warning:
drivers/gpu/drm/bochs/bochs_mm.c:197:22: warning: symbol 'bochs_bo_driver'
was not declared. Should it be static?

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180207111353.30261-1-colin.king@canonical.com

drm/rockchip: Respect page offset for PRIME mmap calls

When mapping external DMA-bufs through the PRIME mmap call, we might be
given an offset which has to be respected. However for the internal DRM
GEM mmap path, we have to ignore the fake mmap offset used to identify
the buffer only. Currently the code always zeroes out vma->vm_pgoff,
which breaks the former.

This patch fixes the problem by moving the vm_pgoff assignment to a
function that is used only for GEM mmap path, so that the PRIME path
retains the original offset.

Cc: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Ørjan Eide <orjan.eide@arm.com>
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130202913.28724-4-thierry.escande@collabora.com

drm/rockchip: support prime import sg table

The prime fd to handle ioctl was not used with rockchip before. Support
was added in order to pass graphics_Gbm and to support potential uses
within Chrome OS (e.g. zero-copy video decode, camera).

Signed-off-by: Haixia Shi <hshi@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130202913.28724-3-thierry.escande@collabora.com

drm/rockchip: Get rid of unnecessary struct fields

This patch removes unused fields from vop structure.

Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130202913.28724-2-thierry.escande@collabora.com

drm/rockchip: inno_hdmi: Remove unnecessary platform_get_resource() error check

devm_ioremap_resource() already checks if the resource is NULL, so
remove the unnecessary platform_get_resource() error check.

Cc: Heiko Stübner <heiko@sntech.de>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1513602150-7542-4-git-send-email-festevam@gmail.com

drm/rockchip: dsi: Remove unnecessary platform_get_resource() error check

devm_ioremap_resource() already checks if the resource is NULL, so
remove the unnecessary platform_get_resource() error check.

Cc: Heiko Stübner <heiko@sntech.de>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1513602150-7542-3-git-send-email-festevam@gmail.com

Merge airlied/drm-next into drm-misc-next

Backmerge 4.15 and hdcp topic branch

Signed-off-by: Sean Paul <seanpaul@chromium.org>

drm/sun4i: fix HSYNC and VSYNC polarity

Differently from other Lcd signals, HSYNC and VSYNC signals
result inverted if their bits are cleared to 0.

Invert their settings of IO_POL register.

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1518717288-123578-1-git-send-email-giulio.benetti@micronovasrl.com

drm/rcar-du: dw-hdmi: Fix compilation

Commit eea034af90c6 ("drm/bridge/synopsys: dw-hdmi: don't clobber drvdata")
broke the build with one build error and one warning. Fix both.

Cc: Archit Taneja <architt@codeaurora.org>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Fixes: eea034af90c6 ("drm/bridge/synopsys: dw-hdmi: don't clobber drvdata")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180216154412.22876-1-maxime.ripard@bootlin.com

drm/sun4i: Implement A83T HDMI driver

A83T has DW HDMI IP block with a custom PHY similar to Synopsys gen2
HDMI PHY.

Only video output was tested, while HW also supports audio and CEC.
Support for them will be added later.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214200906.31509-11-jernej.skrabec@siol.net

drm/sun4i: Add support for A83T second DE2 mixer

It supports 1 VI and 1 UI plane and HW scaling on both planes.

Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214200906.31509-10-jernej.skrabec@siol.net

drm/sun4i: Add support for A83T second TCON

This TCON is connected to HDMI encoder.

Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214200906.31509-9-jernej.skrabec@siol.net

drm/sun4i: Add has_channel_0 TCON quirk

Some TCONs on newer SoCs doesn't support channel 0, since they are meant
to be used only with TV or HDMI encoder.

Prepare support for them with adding has_channel_0 quirk.

Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214200906.31509-8-jernej.skrabec@siol.net

dt-bindings: display: sun4i-drm: Add A83T HDMI pipeline

This commit adds all necessary compatibles and descriptions needed to
implement A83T HDMI pipeline.

Mixer is already properly described, so only compatible is added.

However, A83T TV TCON, which is connected to HDMI, doesn't have channel 0,
contrary to all TCONs currently described. Because of that, TCON
documentation is extended.

A83T features Synopsys DW HDMI controller with a custom PHY which looks
like Synopsys Gen2 PHY with few additions. Since there is no
documentation, needed properties were found out through experimentation
and reading BSP code.

At the end, example is added for newer SoCs, which feature DE2 and DW
HDMI.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214200906.31509-7-jernej.skrabec@siol.net

drm/bridge/synopsys: dw-hdmi: don't clobber drvdata

dw_hdmi shouldn't set drvdata since some drivers might need to store
it's own data there. Rework dw_hdmi in a way to return struct dw_hdmi
instead to store it in drvdata. This way drivers are responsible to
store and pass structure when needed.

Idea was taken from the following commit:
8242ecbd597d ("drm/bridge/synopsys: stop clobbering drvdata")

Cc: p.zabel@pengutronix.de
Cc: Laurent.pinchart@ideasonboard.com
Cc: hjc@rock-chips.com
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214200906.31509-6-jernej.skrabec@siol.net

drm/bridge/synopsys: dw-hdmi: Export some PHY related functions

Parts of PHY code could be useful also for custom PHYs. For example,
Allwinner A83T has custom PHY which is probably Synopsys gen2 PHY
with few additional memory mapped registers, so most of the Synopsys PHY
related code could be reused.

Functions exported here are actually not specific to Synopsys PHYs but
to DWC HDMI controller PHY interface. This means that even if the PHY is
completely custom, i.e. not designed by Synopsys, exported functions can
be useful.

Reviewed-by: Archit Taneja <architt@codeaurora.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214200906.31509-5-jernej.skrabec@siol.net

drm/bridge/synopsys: dw-hdmi: Enable workaround for v1.32a

Allwinner SoCs have dw hdmi controller v1.32a which exhibits same
magenta line issue as i.MX6Q and i.MX6DL. Enable workaround for it.

Tests show that one iteration is enough.

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214200906.31509-4-jernej.skrabec@siol.net

Merge tag 'topic/hdcp-2018-02-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

Add HDCP support to i915 drm driver.

* tag 'topic/hdcp-2018-02-13' of git://anongit.freedesktop.org/drm/drm-misc: (26 commits)
  drm/i915: fix misalignment in HDCP register def
  drm/i915: Reauthenticate HDCP on failure
  drm/i915: Detect panel's hdcp capability
  drm/i915: Optimize HDCP key load
  drm/i915: Retry HDCP bksv read
  drm/i915: Connector info in HDCP debug msgs
  drm/i915: Stop encryption for repeater with no sink
  drm/i915: Handle failure from 2nd stage HDCP auth
  drm/i915: Downgrade hdcp logs from INFO to DEBUG_KMS
  drm/i915: Restore HDCP DRM_INFO when with no downstream
  drm/i915: Check for downstream topology errors
  drm/i915: Start repeater auth on READY/CP_IRQ
  drm/i915: II stage HDCP auth for repeater only
  drm/i915: Extending HDCP for HSW, BDW and BXT+
  drm/i915/dp: Fix compilation of intel_dp_hdcp_check_link
  drm/i915: Only disable HDCP when it's active
  drm/i915: Don't allow HDCP on PORT E/F
  drm/i915: Implement HDCP for DisplayPort
  drm/i915: Implement HDCP for HDMI
  drm/i915: Add function to output Aksv over GMBUS
  ...

Merge tag 'drm-misc-next-2018-02-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 4.17:

UAPI Changes:
- drm/vc4: Expose performance counters to userspace (Boris)

Cross-subsystem Changes:
- MAINTAINERS: Linus to maintain panel-arm-versatile in -misc (Linus)

Core Changes:
- Only use swiotlb when necessary (Chunming)

Driver Changes:
- drm/panel: Add support for ARM Versatile panels (Linus)
- pl111: Improvements around versatile panel support (Linus)

----------------------------------------
Tagged on 2018-02-06:
drm-misc-next for 4.17:

UAPI Changes:
- Validate mode flags + type (Ville)
- Deprecate unused mode flags PIXMUX, BCAST (Ville)
- Deprecate unused mode types BUILTIN, CRTC_C, CLOCK_C, DEFAULT (Ville)

Cross-subsystem Changes:
- MAINTAINERS: s/Daniel/Maarten/ for drm-misc (Daniel)

Core Changes:
- gem: Export gem functions for drivers to use (Samuel)
- bridge: Introduce bridge timings in drm_bridge (Linus)
- dma-buf: Allow exclusive fence to be bundled in fence array when
   calling reservation_object_get_fences_rcu (Christian)
- dp: Add training pattern 4 and HBR3 support to dp helpers (Manasi)
- fourcc: Add alpha bit to formats to avoid driver format LUTs (Maxime)
- mode: Various cleanups + add new device-wide .mode_valid hook (Ville)
- atomic: Fix state leak when non-blocking commits fail (Leo)
  NOTE: IIRC, this was cross-picked to -fixes so it might fall out
- crc: Allow polling on the data fd (Maarten)

Driver Changes:
- bridge/vga-dac: Add THS8134* support (Linus)
- tinydrm: Various MIPI DBI improvements/cleanups (Noralf)
- bridge/dw-mipi-dsi: Cleanups + use create_packet helper (Brian)
- drm/sun4i: Add Display Engine frontend support (Maxime)
- drm/sun4i: Add zpos support + increase num planes from 2 to 4 (Maxime)
- various: Use drm_mode_get_hv_timing() to fill plane clip rectangle (Ville)
- stm: Add 8-bit clut support, add dsi phy v1.31 support, +fixes (Phillipe)

Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Chunming Zhou <david1.zhou@amd.com>
Cc: Samuel Li <Samuel.Li@amd.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
* tag 'drm-misc-next-2018-02-13' of git://anongit.freedesktop.org/drm/drm-misc: (115 commits)
  drm/radeon: only enable swiotlb path when need v2
  drm/amdgpu: only enable swiotlb alloc when need v2
  drm: add func to get max iomem address v2
  drm/vc4: Expose performance counters to userspace
  drm: Print the pid when debug logging an ioctl error.
  drm/stm: ltdc: remove non-alpha color formats on layer 2 for older hw
  drm/stm: ltdc: add non-alpha color formats
  drm/bridge/synopsys: dsi: Add 1.31 version support
  drm/bridge/synopsys: dsi: Add read feature
  drm/pl111: Support multiple endpoints on the CLCD
  drm/pl111: Support variants with broken VBLANK
  drm/pl111: Support variants with broken clock divider
  drm/pl111: Handle the Versatile RGB/BGR565 mode
  drm/pl111: Properly detect the ARM PL110 variants
  drm/panel: Add support for ARM Versatile panels
  drm/panel: Device tree bindings for ARM Versatile panels
  drm/bridge: Rename argument from crtc to bridge
  drm/crc: Add support for polling on the data fd.
  drm/sun4i: Use drm_mode_get_hv_timing() to populate plane clip rectangle
  drm/rcar-du: Use drm_mode_get_hv_timing() to populate plane clip rectangle
  ...

Merge tag 'drm-intel-next-2018-02-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

UAPI Changes:

- Userspace whitelist register GEN9_SLICE_COMMON_ECO_CHICKEN1 for GLK (Kenneth)
- Non-existent PMU counters are not placed to sysfs (Tvrtko)
- Add a note to deprecate I915_SET_COLORKEY_NONE and ignore it (Ville)
* Intel DDX never ended using it, and implementation was wonky

Core Changes:

- Moved away from struct timeval into ktime_t in prep for 2038 (Arnd)
* Merged the i915 portion through drm-tip, no core dependencies

Driver Changes:

- Base support for Icelake and Icelake PCH (Anusha, Rodrigo, Mahesh, Paulo, James, Kelvin)
- Add AUX-F port support for Cannonlake (Rodrigo)
- New DMC firmware for 1.07 Cannonlake (Anusha)
* Go to linux-firmware.git to get it
- Reject non-cursor planes nearly (3 px) out of screen on GLK/CNL (Imre)
- Y/Yf modifiers restored for SKL+ sprites (Ville)
- Compressed framebuffer support for sprites (Ville)
- Tune down overly aggressive shrinking (Chris)
- Shrink kmem caches when GPU is idle (Chris)
- EDID bit-banging fallback for HDMI EDID (Stefan)
- Don't boost the GPU when the waited request is already running (Chris)
- Avoid GLK/BXT CDCLK frequency locking timeouts (Imre)
- Limit DP link rate according to VBT on CNL+ (Jani)
- Skip post-reset request emission if the engine is not idle (Chris)
- Report any link training error on a fixed eDP panel as errors (Manasi)
- DSI panel fixes for Bay Trail (Hans)
- Selftest additions and improvements (Chris, Matt)
- DMA fence test additions and accompanying fixes (Chris)
- Power domain vs. register access fix (Maarten)
- Squelch warnings for people with teensy framebuffers (stride < 512) (Maarten)
- Increase Render/Media power gating hysteresis for Gen9+ (Chris)
- HDMI vswing display workaround for Gen9+ (Ville)
- GuC code cleanup and lockdep fixes (Sagar, Michal Wa.)
- Continuously run hangcheck for simplicity (Chris)
- Execlist debugging improvements (Chris)
- GuC debugging improvements (Sujaritha, Michal Wa., Sagar)
- Command parser boundary checks (Michal Srb)
- Add a workaround for 3DSTATE_SAMPLE_PATTERN on CNL (Rafael)
- Fix PMU enabling race condition (Tvrtko)
- Usual smaller testing and debugging improvements

* tag 'drm-intel-next-2018-02-07' of git://anongit.freedesktop.org/drm/drm-intel: (158 commits)
  drm/i915: Update DRIVER_DATE to 20180207
  drm/i915/pmu: Fix PMU enable vs execlists tasklet race
  drm/i915/cnl: WaPipeControlBefore3DStateSamplePattern
  drm/i915/cmdparser: Do not check past the cmd length.
  drm/i915/cmdparser: Check reg_table_count before derefencing.
  drm/i915: Deprecate I915_SET_COLORKEY_NONE
  drm/i915: Skip post-reset request emission if the engine is not idle
  drm/i915/execlists: Move the reset bits to a more natural home
  drm/i915/selftests: Use a sacrificial context for hang testing
  drm/i915/selftests: Flush old resets between engines
  drm/i915/breadcrumbs: Drop request reference for the signaler thread
  drm/i915: Remove unbannable context spam from reset
  drm/i915/execlists: Remove the startup spam
  drm/i915: Show the GPU state when declaring wedged
  drm/i915: Always update the no_fbc_reason when disabling
  drm/i915: Add some newlines to intel_engine_dump() headers
  drm/i915: Report if an unbannable context is involved in a GPU hang
  drm/i915: Remove spurious DRM_ERROR for cancelled interrupts
  drm/i915/execlists: Flush GTIIR on clearing CS interrupts during reset
  drm/i915: reduce indent in pch detection
  ...

drm: Add DPCD definitions for DP 1.4 FEC feature

Forward Error Correction is supported on DP 1.4.
This patch adds corresponding DPCD register definitions.

v2: Add dri-devel mailing list to the CC list(Jani)

v3: Change names, add missing masks (Manasi)

v4: Add missing shifts to mask (Manasi)

v5: Arrange the definitions in ascending order
of the address (Jani)

v6: remove unnecessary definitions. Add missing masks,
add "/* 1.4 */" to offset definitions. (Jani)

Cc: dri-devel@lists.freedesktop.org
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1518636498-20921-1-git-send-email-anusha.srivatsa@intel.com

Documentation: bindings: add dt documentation for cdn DP controller

This patch adds a binding that describes the cdn DP controller for
rk3399.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
[document the missing 3 reset-names]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180213143549.15197-1-enric.balletbo@collabora.com

drm/radeon: only enable swiotlb path when need v2

swiotlb expands our card accessing range, but its path always is slower
than ttm pool allocation.
So add condition to use it.
v2: move a bit later

Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180209024410.1469-3-david1.zhou@amd.com

drm/amdgpu: only enable swiotlb alloc when need v2

get the max io mapping address of system memory to see if it is over
our card accessing range.
v2: move checking later

Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180209024410.1469-2-david1.zhou@amd.com

drm: add func to get max iomem address v2

it will be used to check if the driver needs swiotlb
v2: Don't use inline, instead, move function to drm_memory.c (Michel Daenzer <michel@daenzer.net>)

Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180209024410.1469-1-david1.zhou@amd.com

Linux 4.16-rc1

unify {de,}mangle_poll(), get rid of kernel-side POLL...

except, again, POLLFREE and POLL_BUSY_LOOP.

With this, we finally get to the promised end result:

 - POLL{IN,OUT,...} are plain integers and *not* in __poll_t, so any
   stray instances of ->poll() still using those will be caught by
   sparse.

 - eventpoll.c and select.c warning-free wrt __poll_t

 - no more kernel-side definitions of POLL... - userland ones are
   visible through the entire kernel (and used pretty much only for
   mangle/demangle)

 - same behavior as after the first series (i.e. sparc et.al. epoll(2)
   working correctly).

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vfs: do bulk POLL* -> EPOLL* replacement

This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:

    for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
        L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
        for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
    done

with de-mangling cleanups yet to come.

NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do.  But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.

The next patch from Al will sort out the final differences, and we
should be all done.

Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'work.poll2' of git://git./linux/kernel/git/viro/vfs

Pull more poll annotation updates from Al Viro:
 "This is preparation to solving the problems you've mentioned in the
  original poll series.

  After this series, the kernel is ready for running

      for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
            L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
            for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
      done

  as a for bulk search-and-replace.

  After that, the kernel is ready to apply the patch to unify
  {de,}mangle_poll(), and then get rid of kernel-side POLL... uses
  entirely, and we should be all done with that stuff.

  Basically, that's what you suggested wrt KPOLL..., except that we can
  use EPOLL... instead - they already are arch-independent (and equal to
  what is currently kernel-side POLL...).

  After the preparations (in this series) switch to returning EPOLL...
  from ->poll() instances is completely mechanical and kernel-side
  POLL... can go away. The last step (killing kernel-side POLL... and
  unifying {de,}mangle_poll() has to be done after the
  search-and-replace job, since we need userland-side POLL... for
  unified {de,}mangle_poll(), thus the cherry-pick at the last step.

  After that we will have:

   - POLL{IN,OUT,...} *not* in __poll_t, so any stray instances of
     ->poll() still using those will be caught by sparse.

   - eventpoll.c and select.c warning-free wrt __poll_t

   - no more kernel-side definitions of POLL... - userland ones are
     visible through the entire kernel (and used pretty much only for
     mangle/demangle)

   - same behavior as after the first series (i.e. sparc et.al. epoll(2)
     working correctly)"

* 'work.poll2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  annotate ep_scan_ready_list()
  ep_send_events_proc(): return result via esed->res
  preparation to switching ->poll() to returning EPOLL...
  add EPOLLNVAL, annotate EPOLL... and event_poll->event
  use linux/poll.h instead of asm/poll.h
  xen: fix poll misannotation
  smc: missing poll annotations

Merge tag 'xtensa-20180211' of git://github.com/jcmvbkbc/linux-xtensa

Pull xtense fix from Max Filippov:
 "Build fix for xtensa architecture with KASAN enabled"

* tag 'xtensa-20180211' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: fix build with KASAN

Merge tag 'nios2-v4.16-rc1' of git://git./linux/kernel/git/lftan/nios2

Pull nios2 update from Ley Foon Tan:

 - clean up old Kconfig options from defconfig

 - remove leading 0x and 0s from bindings notation in dts files

* tag 'nios2-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
  nios2: defconfig: Cleanup from old Kconfig options
  nios2: dts: Remove leading 0x and 0s from bindings notation

xtensa: fix build with KASAN

The commit 917538e212a2 ("kasan: clean up KASAN_SHADOW_SCALE_SHIFT
usage") removed KASAN_SHADOW_SCALE_SHIFT definition from
include/linux/kasan.h and added it to architecture-specific headers,
except for xtensa. This broke the xtensa build with KASAN enabled.
Define KASAN_SHADOW_SCALE_SHIFT in arch/xtensa/include/asm/kasan.h

Reported by: kbuild test robot <fengguang.wu@intel.com>
Fixes: 917538e212a2 ("kasan: clean up KASAN_SHADOW_SCALE_SHIFT usage")
Acked-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

nios2: defconfig: Cleanup from old Kconfig options

Remove old, dead Kconfig option INET_LRO. It is gone since
commit 7bbf3cae65b6 ("ipv4: Remove inet_lro library").

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>

nios2: dts: Remove leading 0x and 0s from bindings notation

Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:

Warning (unit_address_format): Node /XXX unit name should not have leading "0x"

and

Warning (unit_address_format): Node /XXX unit name should not have leading 0s

Converted using the following command:

find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -E -i -e "s/@0x([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" -e "s/@0+([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" {} +

For simplicity, two sed expressions were used to solve each warnings separately.

To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:

https://elinux.org/Device_Tree_Linux#Linux_conventions

This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")

Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>

drm/vc4: Expose performance counters to userspace

The V3D engine has various hardware counters which might be interesting
to userspace performance analysis tools.

Expose new ioctls to create/destroy a performance monitor object and
query the counter values of this perfmance monitor.

Note that a perfomance monitor is given an ID that is only valid on the
file descriptor it has been allocated from. A performance monitor can be
attached to a CL submission and the driver will enable HW counters for
this request and update the performance monitor values at the end of the
job.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180112090926.12538-1-boris.brezillon@free-electrons.com

drm: Print the pid when debug logging an ioctl error.

When we debug print what ioctl we're calling into, we include the pid.
If you have multiple processes rendering simulataneously, the error
return also needs the pid so you can see which of the ioctl calls was
the one to fail.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130215643.11016-1-eric@anholt.net
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Merge tag 'pci-v4.16-fixes-1' of git://git./linux/kernel/git/helgaas/pci

Pull PCI fix from Bjorn Helgaas:
 "Fix a POWER9/powernv INTx regression from the merge window (Alexey
  Kardashevskiy)"

* tag 'pci-v4.16-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  powerpc/pci: Fix broken INTx configuration via OF

Merge tag 'for-linus-20180210' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
 "A few fixes to round off the merge window on the block side:

   - a set of bcache fixes by way of Michael Lyle, from the usual bcache
     suspects.

   - add a simple-to-hook-into function for bpf EIO error injection.

   - fix blk-wbt that mischarectized flushes as reads. Improve the logic
     so that flushes and writes are accounted as writes, and only reads
     as reads. From me.

   - fix requeue crash in BFQ, from Paolo"

* tag 'for-linus-20180210' of git://git.kernel.dk/linux-block:
  block, bfq: add requeue-request hook
  bcache: fix for data collapse after re-attaching an attached device
  bcache: return attach error when no cache set exist
  bcache: set writeback_rate_update_seconds in range [1, 60] seconds
  bcache: fix for allocator and register thread race
  bcache: set error_limit correctly
  bcache: properly set task state in bch_writeback_thread()
  bcache: fix high CPU occupancy during journal
  bcache: add journal statistic
  block: Add should_fail_bio() for bpf error injection
  blk-wbt: account flush requests correctly

Merge tag 'platform-drivers-x86-v4.16-3' of git://github.com/dvhart/linux-pdx86

Pull x86 platform driver updates from Darren Hart:
 "Mellanox fixes and new system type support.

  Mostly data for new system types with a correction and an
  uninitialized variable fix"

[ Pulling from github because git.infradead.org currently seems to be
  down for some reason, but Darren had a backup location    - Linus ]

* tag 'platform-drivers-x86-v4.16-3' of git://github.com/dvhart/linux-pdx86:
  platform/x86: mlx-platform: Add support for new 200G IB and Ethernet systems
  platform/x86: mlx-platform: Add support for new msn201x system type
  platform/x86: mlx-platform: Add support for new msn274x system type
  platform/x86: mlx-platform: Fix power cable setting for msn21xx family
  platform/x86: mlx-platform: Add define for the negative bus
  platform/x86: mlx-platform: Use defines for bus assignment
  platform/mellanox: mlxreg-hotplug: Fix uninitialized variable

Merge tag 'chrome-platform-for-linus-4.16' of git://git./linux/kernel/git/bleung/chrome-platform

Pull chrome platform updates from Benson Leung:

 - move cros_ec_dev to drivers/mfd

 - other small maintenance fixes

[ The cros_ec_dev movement came in earlier through the MFD tree  - Linus ]

* tag 'chrome-platform-for-linus-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform:
  platform/chrome: Use proper protocol transfer function
  platform/chrome: cros_ec_lpc: Add support for Google Glimmer
  platform/chrome: cros_ec_lpc: Register the driver if ACPI entry is missing.
  platform/chrome: cros_ec_lpc: remove redundant pointer request
  cros_ec: fix nul-termination for firmware build info
  platform/chrome: chromeos_laptop: make chromeos_laptop const

Merge tag 'kvm-4.16-1' of git://git./virt/kvm/kvm

Pull KVM updates from Radim Krčmář:
 "ARM:

   - icache invalidation optimizations, improving VM startup time

   - support for forwarded level-triggered interrupts, improving
     performance for timers and passthrough platform devices

   - a small fix for power-management notifiers, and some cosmetic
     changes

  PPC:

   - add MMIO emulation for vector loads and stores

   - allow HPT guests to run on a radix host on POWER9 v2.2 CPUs without
     requiring the complex thread synchronization of older CPU versions

   - improve the handling of escalation interrupts with the XIVE
     interrupt controller

   - support decrement register migration

   - various cleanups and bugfixes.

  s390:

   - Cornelia Huck passed maintainership to Janosch Frank

   - exitless interrupts for emulated devices

   - cleanup of cpuflag handling

   - kvm_stat counter improvements

   - VSIE improvements

   - mm cleanup

  x86:

   - hypervisor part of SEV

   - UMIP, RDPID, and MSR_SMI_COUNT emulation

   - paravirtualized TLB shootdown using the new KVM_VCPU_PREEMPTED bit

   - allow guests to see TOPOEXT, GFNI, VAES, VPCLMULQDQ, and more
     AVX512 features

   - show vcpu id in its anonymous inode name

   - many fixes and cleanups

   - per-VCPU MSR bitmaps (already merged through x86/pti branch)

   - stable KVM clock when nesting on Hyper-V (merged through
     x86/hyperv)"

* tag 'kvm-4.16-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (197 commits)
  KVM: PPC: Book3S: Add MMIO emulation for VMX instructions
  KVM: PPC: Book3S HV: Branch inside feature section
  KVM: PPC: Book3S HV: Make HPT resizing work on POWER9
  KVM: PPC: Book3S HV: Fix handling of secondary HPTEG in HPT resizing code
  KVM: PPC: Book3S PR: Fix broken select due to misspelling
  KVM: x86: don't forget vcpu_put() in kvm_arch_vcpu_ioctl_set_sregs()
  KVM: PPC: Book3S PR: Fix svcpu copying with preemption enabled
  KVM: PPC: Book3S HV: Drop locks before reading guest memory
  kvm: x86: remove efer_reload entry in kvm_vcpu_stat
  KVM: x86: AMD Processor Topology Information
  x86/kvm/vmx: do not use vm-exit instruction length for fast MMIO when running nested
  kvm: embed vcpu id to dentry of vcpu anon inode
  kvm: Map PFN-type memory regions as writable (if possible)
  x86/kvm: Make it compile on 32bit and with HYPYERVISOR_GUEST=n
  KVM: arm/arm64: Fixup userspace irqchip static key optimization
  KVM: arm/arm64: Fix userspace_irqchip_in_use counting
  KVM: arm/arm64: Fix incorrect timer_is_pending logic
  MAINTAINERS: update KVM/s390 maintainers
  MAINTAINERS: add Halil as additional vfio-ccw maintainer
  MAINTAINERS: add David as a reviewer for KVM/s390
  ...

powerpc/pci: Fix broken INTx configuration via OF

59f47eff03a0 ("powerpc/pci: Use of_irq_parse_and_map_pci() helper")
replaced of_irq_parse_pci() + irq_create_of_mapping() with
of_irq_parse_and_map_pci(), but neglected to capture the virq
returned by irq_create_of_mapping(), so virq remained zero, which
caused INTx configuration to fail.

Save the virq value returned by of_irq_parse_and_map_pci() and correct
the virq declaration to match the of_irq_parse_and_map_pci() signature.

Fixes: 59f47eff03a0 "powerpc/pci: Use of_irq_parse_and_map_pci() helper"
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>