media: uvcvideo: Avoid cyclic entity chains due to malformed USB descriptors

commit 68035c80e129c4cfec659aac4180354530b26527 upstream.

Way back in 2017, fuzzing the 4.14-rc2 USB stack with syzkaller kicked
up the following WARNING from the UVC chain scanning code:

  | list_add double add: new=ffff880069084010, prev=ffff880069084010,
  | next=ffff880067d22298.
  | ------------[ cut here ]------------
  | WARNING: CPU: 1 PID: 1846 at lib/list_debug.c:31 __list_add_valid+0xbd/0xf0
  | Modules linked in:
  | CPU: 1 PID: 1846 Comm: kworker/1:2 Not tainted
  | 4.14.0-rc2-42613-g1488251d1a98 #238
  | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
  | Workqueue: usb_hub_wq hub_event
  | task: ffff88006b01ca40 task.stack: ffff880064358000
  | RIP: 0010:__list_add_valid+0xbd/0xf0 lib/list_debug.c:29
  | RSP: 0018:ffff88006435ddd0 EFLAGS: 00010286
  | RAX: 0000000000000058 RBX: ffff880067d22298 RCX: 0000000000000000
  | RDX: 0000000000000058 RSI: ffffffff85a58800 RDI: ffffed000c86bbac
  | RBP: ffff88006435dde8 R08: 1ffff1000c86ba52 R09: 0000000000000000
  | R10: 0000000000000002 R11: 0000000000000000 R12: ffff880069084010
  | R13: ffff880067d22298 R14: ffff880069084010 R15: ffff880067d222a0
  | FS:  0000000000000000(0000) GS:ffff88006c900000(0000) knlGS:0000000000000000
  | CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  | CR2: 0000000020004ff2 CR3: 000000006b447000 CR4: 00000000000006e0
  | Call Trace:
  |  __list_add ./include/linux/list.h:59
  |  list_add_tail+0x8c/0x1b0 ./include/linux/list.h:92
  |  uvc_scan_chain_forward.isra.8+0x373/0x416
  | drivers/media/usb/uvc/uvc_driver.c:1471
  |  uvc_scan_chain drivers/media/usb/uvc/uvc_driver.c:1585
  |  uvc_scan_device drivers/media/usb/uvc/uvc_driver.c:1769
  |  uvc_probe+0x77f2/0x8f00 drivers/media/usb/uvc/uvc_driver.c:2104

Looking into the output from usbmon, the interesting part is the
following data packet:

  ffff880069c63e00 30710169 C Ci:1:002:0 0 143 = 09028f00 01030080
  00090403 00000e01 00000924 03000103 7c003328 010204db

If we drop the lead configuration and interface descriptors, we're left
with an output terminal descriptor describing a generic display:

  /* Output terminal descriptor */
  buf[0] 09
  buf[1] 24
  buf[2] 03 /* UVC_VC_OUTPUT_TERMINAL */
  buf[3] 00 /* ID */
  buf[4] 01 /* type == 0x0301 (UVC_OTT_DISPLAY) */
  buf[5] 03
  buf[6] 7c
  buf[7] 00 /* source ID refers to self! */
  buf[8] 33

The problem with this descriptor is that it is self-referential: the
source ID of 0 matches itself! This causes the 'struct uvc_entity'
representing the display to be added to its chain list twice during
'uvc_scan_chain()': once via 'uvc_scan_chain_entity()' when it is
processed directly from the 'dev->entities' list and then again
immediately afterwards when trying to follow the source ID in
'uvc_scan_chain_forward()'

Add a check before adding an entity to a chain list to ensure that the
entity is not already part of a chain.

Link: https://lore.kernel.org/linux-media/CAAeHK+z+Si69jUR+N-SjN9q4O+o5KFiNManqEa-PjUta7EOb7A@mail.gmail.com/
Cc: <stable@vger.kernel.org>
Fixes: c0efd232929c ("V4L/DVB (8145a): USB Video Class driver")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bnxt_en: Fix logic that disables Bus Master during firmware reset.

[ Upstream commit d407302895d3f3ca3a333c711744a95e0b1b0150 ]

The current logic that calls pci_disable_device() in __bnxt_close_nic()
during firmware reset is flawed.  If firmware is still alive, we're
disabling the device too early, causing some firmware commands to
not reach the firmware.

Fix it by moving the logic to bnxt_reset_close().  If firmware is
in fatal condition, we call pci_disable_device() before we free
any of the rings to prevent DMA corruption of the freed rings.  If
firmware is still alive, we call pci_disable_device() after the
last firmware message has been sent.

Fixes: 3bc7d4a352ef ("bnxt_en: Add BNXT_STATE_IN_FW_RESET state.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netdevsim: fix stack-out-of-bounds in nsim_dev_debugfs_init()

[ Upstream commit 6fb8852b1298200da39bd85788bc5755d1d56f32 ]

When netdevsim dev is being created, a debugfs directory is created.
The variable "dev_ddir_name" is 16bytes device name pointer and device
name is "netdevsim<dev id>".
The maximum dev id length is 10.
So, 16bytes for device name isn't enough.

Test commands:
    modprobe netdevsim
    echo "1000000000 0" > /sys/bus/netdevsim/new_device

Splat looks like:
[  249.622710][  T900] BUG: KASAN: stack-out-of-bounds in number+0x824/0x880
[  249.623658][  T900] Write of size 1 at addr ffff88804c527988 by task bash/900
[  249.624521][  T900]
[  249.624830][  T900] CPU: 1 PID: 900 Comm: bash Not tainted 5.5.0+ #322
[  249.625691][  T900] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[  249.626712][  T900] Call Trace:
[  249.627103][  T900]  dump_stack+0x96/0xdb
[  249.627639][  T900]  ? number+0x824/0x880
[  249.628173][  T900]  print_address_description.constprop.5+0x1be/0x360
[  249.629022][  T900]  ? number+0x824/0x880
[  249.629569][  T900]  ? number+0x824/0x880
[  249.630105][  T900]  __kasan_report+0x12a/0x170
[  249.630717][  T900]  ? number+0x824/0x880
[  249.631201][  T900]  kasan_report+0xe/0x20
[  249.631723][  T900]  number+0x824/0x880
[  249.632235][  T900]  ? put_dec+0xa0/0xa0
[  249.632716][  T900]  ? rcu_read_lock_sched_held+0x90/0xc0
[  249.633392][  T900]  vsnprintf+0x63c/0x10b0
[  249.633983][  T900]  ? pointer+0x5b0/0x5b0
[  249.634543][  T900]  ? mark_lock+0x11d/0xc40
[  249.635200][  T900]  sprintf+0x9b/0xd0
[  249.635750][  T900]  ? scnprintf+0xe0/0xe0
[  249.636370][  T900]  nsim_dev_probe+0x63c/0xbf0 [netdevsim]
[ ... ]

Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Fixes: ab1d0cc004d7 ("netdevsim: change debugfs tree topology")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MAINTAINERS: correct entries for ISDN/mISDN section

[ Upstream commit dff6bc1bfd462b76dc13ec19dedc2c134a62ac59 ]

Commit 6d97985072dc ("isdn: move capi drivers to staging") cleaned up the
isdn drivers and split the MAINTAINERS section for ISDN, but missed to add
the terminal slash for the two directories mISDN and hardware. Hence, all
files in those directories were not part of the new ISDN/mISDN SUBSYSTEM,
but were considered to be part of "THE REST".

Rectify the situation, and while at it, also complete the section with two
further build files that belong to that subsystem.

This was identified with a small script that finds all files belonging to
"THE REST" according to the current MAINTAINERS file, and I investigated
upon its output.

Fixes: 6d97985072dc ("isdn: move capi drivers to staging")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ionic: fix rxq comp packet type mask

[ Upstream commit b5ce31b5e11b768b7d685b2bab7db09ad5549493 ]

Be sure to include all the packet type bits in the mask.

Fixes: fbfb8031533c ("ionic: Add hardware init and device commands")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: clear tp->segs_{in|out} in tcp_disconnect()

[ Upstream commit 784f8344de750a41344f4bbbebb8507a730fc99c ]

tp->segs_in and tp->segs_out need to be cleared in tcp_disconnect().

tcp_disconnect() is rarely used, but it is worth fixing it.

Fixes: 2efd055c53c0 ("tcp: add tcpi_segs_in and tcpi_segs_out to tcp_info")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Marcelo Ricardo Leitner <mleitner@redhat.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: clear tp->data_segs{in|out} in tcp_disconnect()

[ Upstream commit db7ffee6f3eb3683cdcaeddecc0a630a14546fe3 ]

tp->data_segs_in and tp->data_segs_out need to be cleared
in tcp_disconnect().

tcp_disconnect() is rarely used, but it is worth fixing it.

Fixes: a44d6eacdaf5 ("tcp: Add RFC4898 tcpEStatsPerfDataSegsOut/In")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: clear tp->delivered in tcp_disconnect()

[ Upstream commit 2fbdd56251b5c62f96589f39eded277260de7267 ]

tp->delivered needs to be cleared in tcp_disconnect().

tcp_disconnect() is rarely used, but it is worth fixing it.

Fixes: ddf1af6fa00e ("tcp: new delivery accounting")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: clear tp->total_retrans in tcp_disconnect()

[ Upstream commit c13c48c00a6bc1febc73902505bdec0967bd7095 ]

total_retrans needs to be cleared in tcp_disconnect().

tcp_disconnect() is rarely used, but it is worth fixing it.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: SeongJae Park <sjpark@amazon.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rxrpc: Fix NULL pointer deref due to call->conn being cleared on disconnect

[ Upstream commit 5273a191dca65a675dc0bcf3909e59c6933e2831 ]

When a call is disconnected, the connection pointer from the call is
cleared to make sure it isn't used again and to prevent further attempted
transmission for the call.  Unfortunately, there might be a daemon trying
to use it at the same time to transmit a packet.

Fix this by keeping call->conn set, but setting a flag on the call to
indicate disconnection instead.

Remove also the bits in the transmission functions where the conn pointer is
checked and a ref taken under spinlock as this is now redundant.

Fixes: 8d94aa381dab ("rxrpc: Calls shouldn't hold socket refs")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rxrpc: Fix missing active use pinning of rxrpc_local object

[ Upstream commit 04d36d748fac349b068ef621611f454010054c58 ]

The introduction of a split between the reference count on rxrpc_local
objects and the usage count didn't quite go far enough.  A number of kernel
work items need to make use of the socket to perform transmission.  These
also need to get an active count on the local object to prevent the socket
from being closed.

Fix this by getting the active count in those places.

Also split out the raw active count get/put functions as these places tend
to hold refs on the rxrpc_local object already, so getting and putting an
extra object ref is just a waste of time.

The problem can lead to symptoms like:

    BUG: kernel NULL pointer dereference, address: 0000000000000018
    ..
    CPU: 2 PID: 818 Comm: kworker/u9:0 Not tainted 5.5.0-fscache+ #51
    ...
    RIP: 0010:selinux_socket_sendmsg+0x5/0x13
    ...
    Call Trace:
     security_socket_sendmsg+0x2c/0x3e
     sock_sendmsg+0x1a/0x46
     rxrpc_send_keepalive+0x131/0x1ae
     rxrpc_peer_keepalive_worker+0x219/0x34b
     process_one_work+0x18e/0x271
     worker_thread+0x1a3/0x247
     kthread+0xe6/0xeb
     ret_from_fork+0x1f/0x30

Fixes: 730c5fd42c1e ("rxrpc: Fix local endpoint refcounting")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rxrpc: Fix insufficient receive notification generation

[ Upstream commit f71dbf2fb28489a79bde0dca1c8adfb9cdb20a6b ]

In rxrpc_input_data(), rxrpc_notify_socket() is called if the base sequence
number of the packet is immediately following the hard-ack point at the end
of the function.  However, this isn't sufficient, since the recvmsg side
may have been advancing the window and then overrun the position in which
we're adding - at which point rx_hard_ack >= seq0 and no notification is
generated.

Fix this by always generating a notification at the end of the input
function.

Without this, a long call may stall, possibly indefinitely.

Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rxrpc: Fix use-after-free in rxrpc_put_local()

[ Upstream commit fac20b9e738523fc884ee3ea5be360a321cd8bad ]

Fix rxrpc_put_local() to not access local->debug_id after calling
atomic_dec_return() as, unless that returned n==0, we no longer have the
right to access the object.

Fixes: 06d9532fa6b3 ("rxrpc: Fix read-after-free in rxrpc_queue_local()")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bnxt_en: Fix TC queue mapping.

[ Upstream commit 18e4960c18f484ac288f41b43d0e6c4c88e6ea78 ]

The driver currently only calls netdev_set_tc_queue when the number of
TCs is greater than 1.  Instead, the comparison should be greater than
or equal to 1.  Even with 1 TC, we need to set the queue mapping.

This bug can cause warnings when the number of TCs is changed back to 1.

Fixes: 7809592d3e2e ("bnxt_en: Enable MSIX early in bnxt_init_one().")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: Delete txtimer in suspend()

[ Upstream commit 14b41a2959fbaa50932699d32ceefd6643abacc6 ]

When running v5.5 with a rootfs on NFS, memory abort may happen in
the system resume stage:
 Unable to handle kernel paging request at virtual address dead00000000012a
 [dead00000000012a] address between user and kernel address ranges
 pc : run_timer_softirq+0x334/0x3d8
 lr : run_timer_softirq+0x244/0x3d8
 x1 : ffff800011cafe80 x0 : dead000000000122
 Call trace:
  run_timer_softirq+0x334/0x3d8
  efi_header_end+0x114/0x234
  irq_exit+0xd0/0xd8
  __handle_domain_irq+0x60/0xb0
  gic_handle_irq+0x58/0xa8
  el1_irq+0xb8/0x180
  arch_cpu_idle+0x10/0x18
  do_idle+0x1d8/0x2b0
  cpu_startup_entry+0x24/0x40
  secondary_start_kernel+0x1b4/0x208
 Code: f9000693 a9400660 f9000020 b4000040 (f9000401)
 ---[ end trace bb83ceeb4c482071 ]---
 Kernel panic - not syncing: Fatal exception in interrupt
 SMP: stopping secondary CPUs
 SMP: failed to stop secondary CPUs 2-3
 Kernel Offset: disabled
 CPU features: 0x00002,2300aa30
 Memory Limit: none
 ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

It's found that stmmac_xmit() and stmmac_resume() sometimes might
run concurrently, possibly resulting in a race condition between
mod_timer() and setup_timer(), being called by stmmac_xmit() and
stmmac_resume() respectively.

Since the resume() runs setup_timer() every time, it'd be safer to
have del_timer_sync() in the suspend() as the counterpart.

Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net_sched: fix an OOB access in cls_tcindex

[ Upstream commit 599be01ee567b61f4471ee8078870847d0a11e8e ]

As Eric noticed, tcindex_alloc_perfect_hash() uses cp->hash
to compute the size of memory allocation, but cp->hash is
set again after the allocation, this caused an out-of-bound
access.

So we have to move all cp->hash initialization and computation
before the memory allocation. Move cp->mask and cp->shift together
as cp->hash may need them for computation too.

Reported-and-tested-by: syzbot+35d4dea36c387813ed31@syzkaller.appspotmail.com
Fixes: 331b72922c5f ("net: sched: RCU cls_tcindex")
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: hsr: fix possible NULL deref in hsr_handle_frame()

[ Upstream commit 2b5b8251bc9fe2f9118411f037862ee17cf81e97 ]

hsr_port_get_rcu() can return NULL, so we need to be careful.

general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
CPU: 1 PID: 10249 Comm: syz-executor.5 Not tainted 5.5.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__read_once_size include/linux/compiler.h:199 [inline]
RIP: 0010:hsr_addr_is_self+0x86/0x330 net/hsr/hsr_framereg.c:44
Code: 04 00 f3 f3 f3 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 e8 6b ff 94 f9 4c 89 f2 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 75 02 00 00 48 8b 43 30 49 39 c6 49 89 47 c0 0f
RSP: 0018:ffffc90000da8a90 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff87e0cc33
RDX: 0000000000000006 RSI: ffffffff87e035d5 RDI: 0000000000000000
RBP: ffffc90000da8b20 R08: ffff88808e7de040 R09: ffffed1015d2707c
R10: ffffed1015d2707b R11: ffff8880ae9383db R12: ffff8880a689bc5e
R13: 1ffff920001b5153 R14: 0000000000000030 R15: ffffc90000da8af8
FS:  00007fd7a42be700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b32338000 CR3: 00000000a928c000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <IRQ>
 hsr_handle_frame+0x1c5/0x630 net/hsr/hsr_slave.c:31
 __netif_receive_skb_core+0xfbc/0x30b0 net/core/dev.c:5099
 __netif_receive_skb_one_core+0xa8/0x1a0 net/core/dev.c:5196
 __netif_receive_skb+0x2c/0x1d0 net/core/dev.c:5312
 process_backlog+0x206/0x750 net/core/dev.c:6144
 napi_poll net/core/dev.c:6582 [inline]
 net_rx_action+0x508/0x1120 net/core/dev.c:6650
 __do_softirq+0x262/0x98c kernel/softirq.c:292
 do_softirq_own_stack+0x2a/0x40 arch/x86/entry/entry_64.S:1082
 </IRQ>

Fixes: c5a759117210 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

l2tp: Allow duplicate session creation with UDP

[ Upstream commit 0d0d9a388a858e271bb70e71e99e7fe2a6fd6f64 ]

In the past it was possible to create multiple L2TPv3 sessions with the
same session id as long as the sessions belonged to different tunnels.
The resulting sessions had issues when used with IP encapsulated tunnels,
but worked fine with UDP encapsulated ones. Some applications began to
rely on this behaviour to avoid having to negotiate unique session ids.

Some time ago a change was made to require session ids to be unique across
all tunnels, breaking the applications making use of this "feature".

This change relaxes the duplicate session id check to allow duplicates
if both of the colliding sessions belong to UDP encapsulated tunnels.

Fixes: dbdbc73b4478 ("l2tp: fix duplicate session creation")
Signed-off-by: Ridge Kennedy <ridge.kennedy@alliedtelesis.co.nz>
Acked-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gtp: use __GFP_NOWARN to avoid memalloc warning

[ Upstream commit bd5cd35b782abf5437fbd01dfaee12437d20e832 ]

gtp hashtable size is received by user-space.
So, this hashtable size could be too large. If so, kmalloc will internally
print a warning message.
This warning message is actually not necessary for the gtp module.
So, this patch adds __GFP_NOWARN to avoid this message.

Splat looks like:
[ 2171.200049][ T1860] WARNING: CPU: 1 PID: 1860 at mm/page_alloc.c:4713 __alloc_pages_nodemask+0x2f3/0x740
[ 2171.238885][ T1860] Modules linked in: gtp veth openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv]
[ 2171.262680][ T1860] CPU: 1 PID: 1860 Comm: gtp-link Not tainted 5.5.0+ #321
[ 2171.263567][ T1860] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 2171.264681][ T1860] RIP: 0010:__alloc_pages_nodemask+0x2f3/0x740
[ 2171.265332][ T1860] Code: 64 fe ff ff 65 48 8b 04 25 c0 0f 02 00 48 05 f0 12 00 00 41 be 01 00 00 00 49 89 47 0
[ 2171.267301][ T1860] RSP: 0018:ffff8880b51af1f0 EFLAGS: 00010246
[ 2171.268320][ T1860] RAX: ffffed1016a35e43 RBX: 0000000000000000 RCX: 0000000000000000
[ 2171.269517][ T1860] RDX: 0000000000000000 RSI: 000000000000000b RDI: 0000000000000000
[ 2171.270305][ T1860] RBP: 0000000000040cc0 R08: ffffed1018893109 R09: dffffc0000000000
[ 2171.275973][ T1860] R10: 0000000000000001 R11: ffffed1018893108 R12: 1ffff11016a35e43
[ 2171.291039][ T1860] R13: 000000000000000b R14: 000000000000000b R15: 00000000000f4240
[ 2171.292328][ T1860] FS:  00007f53cbc83740(0000) GS:ffff8880da000000(0000) knlGS:0000000000000000
[ 2171.293409][ T1860] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2171.294586][ T1860] CR2: 000055f540014508 CR3: 00000000b49f2004 CR4: 00000000000606e0
[ 2171.295424][ T1860] Call Trace:
[ 2171.295756][ T1860]  ? mark_held_locks+0xa5/0xe0
[ 2171.296659][ T1860]  ? __alloc_pages_slowpath+0x21b0/0x21b0
[ 2171.298283][ T1860]  ? gtp_encap_enable_socket+0x13e/0x400 [gtp]
[ 2171.298962][ T1860]  ? alloc_pages_current+0xc1/0x1a0
[ 2171.299475][ T1860]  kmalloc_order+0x22/0x80
[ 2171.299936][ T1860]  kmalloc_order_trace+0x1d/0x140
[ 2171.300437][ T1860]  __kmalloc+0x302/0x3a0
[ 2171.300896][ T1860]  gtp_newlink+0x293/0xba0 [gtp]
[ ... ]

Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cls_rsvp: fix rsvp_policy

[ Upstream commit cb3c0e6bdf64d0d124e94ce43cbe4ccbb9b37f51 ]

NLA_BINARY can be confusing, since .len value represents
the max size of the blob.

cls_rsvp really wants user space to provide long enough data
for TCA_RSVP_DST and TCA_RSVP_SRC attributes.

BUG: KMSAN: uninit-value in rsvp_get net/sched/cls_rsvp.h:258 [inline]
BUG: KMSAN: uninit-value in gen_handle net/sched/cls_rsvp.h:402 [inline]
BUG: KMSAN: uninit-value in rsvp_change+0x1ae9/0x4220 net/sched/cls_rsvp.h:572
CPU: 1 PID: 13228 Comm: syz-executor.1 Not tainted 5.5.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1c9/0x220 lib/dump_stack.c:118
 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118
 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
 rsvp_get net/sched/cls_rsvp.h:258 [inline]
 gen_handle net/sched/cls_rsvp.h:402 [inline]
 rsvp_change+0x1ae9/0x4220 net/sched/cls_rsvp.h:572
 tc_new_tfilter+0x31fe/0x5010 net/sched/cls_api.c:2104
 rtnetlink_rcv_msg+0xcb7/0x1570 net/core/rtnetlink.c:5415
 netlink_rcv_skb+0x451/0x650 net/netlink/af_netlink.c:2477
 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:5442
 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
 netlink_unicast+0xf9e/0x1100 net/netlink/af_netlink.c:1328
 netlink_sendmsg+0x1248/0x14d0 net/netlink/af_netlink.c:1917
 sock_sendmsg_nosec net/socket.c:639 [inline]
 sock_sendmsg net/socket.c:659 [inline]
 ____sys_sendmsg+0x12b6/0x1350 net/socket.c:2330
 ___sys_sendmsg net/socket.c:2384 [inline]
 __sys_sendmsg+0x451/0x5f0 net/socket.c:2417
 __do_sys_sendmsg net/socket.c:2426 [inline]
 __se_sys_sendmsg+0x97/0xb0 net/socket.c:2424
 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424
 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45b349
Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f269d43dc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f269d43e6d4 RCX: 000000000045b349
RDX: 0000000000000000 RSI: 00000000200001c0 RDI: 0000000000000003
RBP: 000000000075bfc8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 00000000000009c2 R14: 00000000004cb338 R15: 000000000075bfd4

Uninit was created at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:144 [inline]
 kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:127
 kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:82
 slab_alloc_node mm/slub.c:2774 [inline]
 __kmalloc_node_track_caller+0xb40/0x1200 mm/slub.c:4382
 __kmalloc_reserve net/core/skbuff.c:141 [inline]
 __alloc_skb+0x2fd/0xac0 net/core/skbuff.c:209
 alloc_skb include/linux/skbuff.h:1049 [inline]
 netlink_alloc_large_skb net/netlink/af_netlink.c:1174 [inline]
 netlink_sendmsg+0x7d3/0x14d0 net/netlink/af_netlink.c:1892
 sock_sendmsg_nosec net/socket.c:639 [inline]
 sock_sendmsg net/socket.c:659 [inline]
 ____sys_sendmsg+0x12b6/0x1350 net/socket.c:2330
 ___sys_sendmsg net/socket.c:2384 [inline]
 __sys_sendmsg+0x451/0x5f0 net/socket.c:2417
 __do_sys_sendmsg net/socket.c:2426 [inline]
 __se_sys_sendmsg+0x97/0xb0 net/socket.c:2424
 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424
 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 6fa8c0144b77 ("[NET_SCHED]: Use nla_policy for attribute validation in classifiers")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bnxt_en: Move devlink_register before registering netdev

[ Upstream commit cda2cab0771183932d6ba73c5ac63bb63decdadf ]

Latest kernels get the phys_port_name via devlink, if
ndo_get_phys_port_name is not defined. To provide the phys_port_name
correctly, register devlink before registering netdev.

Also call devlink_port_type_eth_set() after registering netdev as
devlink port updates the netdev structure and notifies user.

Cc: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc32: fix struct ipc64_perm type definition

[ Upstream commit 34ca70ef7d3a9fa7e89151597db5e37ae1d429b4 ]

As discussed in the strace issue tracker, it appears that the sparc32
sysvipc support has been broken for the past 11 years. It was however
working in compat mode, which is how it must have escaped most of the
regular testing.

The problem is that a cleanup patch inadvertently changed the uid/gid
fields in struct ipc64_perm from 32-bit types to 16-bit types in uapi
headers.

Both glibc and uclibc-ng still use the original types, so they should
work fine with compat mode, but not natively.  Change the definitions
to use __kernel_uid32_t and __kernel_gid32_t again.

Fixes: 83c86984bff2 ("sparc: unify ipcbuf.h")
Link: https://github.com/strace/strace/issues/116
Cc: <stable@vger.kernel.org> # v2.6.29
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: "Dmitry V . Levin" <ldv@altlinux.org>
Cc: Rich Felker <dalias@libc.org>
Cc: libc-alpha@sourceware.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 5.4.18

tracing/uprobe: Fix to make trace_uprobe_filter alignment safe

[ Upstream commit b61387cb732cf283d318b2165c44913525fe545f ]

Commit 99c9a923e97a ("tracing/uprobe: Fix double perf_event
linking on multiprobe uprobe") moved trace_uprobe_filter on
trace_probe_event. However, since it introduced a flexible
data structure with char array and type casting, the
alignment of trace_uprobe_filter can be broken.

This changes the type of the array to trace_uprobe_filter
data strucure to fix it.

Link: http://lore.kernel.org/r/20200120124022.GA14897@hirez.programming.kicks-ass.net
Link: http://lkml.kernel.org/r/157966340499.5107.10978352478952144902.stgit@devnote2
Fixes: 99c9a923e97a ("tracing/uprobe: Fix double perf_event linking on multiprobe uprobe")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "rsi: fix potential null dereference in rsi_probe()"

[ Upstream commit c5dcf8f0e850a504235a0af51f73d51b6ddc0933 ]

This reverts commit f170d44bc4ec2feae5f6206980e7ae7fbf0432a0.

USB core will never call a USB-driver probe function with a NULL
device-id pointer.

Reverting before removing the existing checks in order to document this
and prevent the offending commit from being "autoselected" for stable.

Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: topology: fix soc_tplg_fe_link_create() - link->dobj initialization order

[ Upstream commit 8ce1cbd6ce0b1bda0c980c64fee4c1e1378355f1 ]

The code which checks the return value for snd_soc_add_dai_link() call
in soc_tplg_fe_link_create() moved the snd_soc_add_dai_link() call before
link->dobj members initialization.

While it does not affect the latest kernels, the old soc-core.c code
in the stable kernels is affected. The snd_soc_add_dai_link() function uses
the link->dobj.type member to check, if the link structure is valid.

Reorder the link->dobj initialization to make things work again.
It's harmless for the recent code (and the structure should be properly
initialized before other calls anyway).

The problem is in stable linux-5.4.y since version 5.4.11 when the
upstream commit 76d270364932 was applied.

Fixes: 76d270364932 ("ASoC: topology: Check return value for snd_soc_add_dai_link()")
Cc: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20200122190752.3081016-1-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm/migrate.c: also overwrite error when it is bigger than zero

[ Upstream commit dfe9aa23cab7880a794db9eb2d176c00ed064eb6 ]

If we get here after successfully adding page to list, err would be 1 to
indicate the page is queued in the list.

Current code has two problems:

  * on success, 0 is not returned
  * on error, if add_page_for_migratioin() return 1, and the following err1
    from do_move_pages_to_node() is set, the err1 is not returned since err
    is 1

And these behaviors break the user interface.

Link: http://lkml.kernel.org/r/20200119065753.21694-1-richardw.yang@linux.intel.com
Fixes: e0153fc2c760 ("mm: move_pages: return valid node id in status if the page is already on the target node").
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Acked-by: Yang Shi <yang.shi@linux.alibaba.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf report: Fix no libunwind compiled warning break s390 issue

[ Upstream commit c3314a74f86dc00827e0945c8e5039fc3aebaa3c ]

Commit 800d3f561659 ("perf report: Add warning when libunwind not
compiled in") breaks the s390 platform. S390 uses libdw-dwarf-unwind for
call chain unwinding and had no support for libunwind.

So the warning "Please install libunwind development packages during the
perf build." caused the confusion even if the call-graph is displayed
correctly.

This patch adds checking for HAVE_DWARF_SUPPORT, which is set when
libdw-dwarf-unwind is compiled in.

Fixes: 800d3f561659 ("perf report: Add warning when libunwind not compiled in")
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200107191745.18415-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dm thin: fix use-after-free in metadata_pre_commit_callback

[ Upstream commit a4a8d286586d4b28c8517a51db8d86954aadc74b ]

dm-thin uses struct pool to hold the state of the pool. There may be
multiple pool_c's pointing to a given pool, each pool_c represents a
loaded target. pool_c's may be created and destroyed arbitrarily and the
pool contains a reference count of pool_c's pointing to it.

Since commit 694cfe7f31db3 ("dm thin: Flush data device before
committing metadata") a pointer to pool_c is passed to
dm_pool_register_pre_commit_callback and this function stores it in
pmd->pre_commit_context. If this pool_c is freed, but pool is not
(because there is another pool_c referencing it), we end up in a
situation where pmd->pre_commit_context structure points to freed
pool_c. It causes a crash in metadata_pre_commit_callback.

Fix this by moving the dm_pool_register_pre_commit_callback() from
pool_ctr() to pool_preresume(). This way the in-core thin-pool metadata
is only ever armed with callback data whose lifetime matches the
active thin-pool target.

In should be noted that this fix preserves the ability to load a
thin-pool table that uses a different data block device (that contains
the same data) -- though it is unclear if that capability is still
useful and/or needed.

Fixes: 694cfe7f31db3 ("dm thin: Flush data device before committing metadata")
Cc: stable@vger.kernel.org
Reported-by: Zdenek Kabelac <zkabelac@redhat.com>
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

flow_dissector: Fix to use new variables for port ranges in bpf hook

[ Upstream commit 59fb9b62fb6c929a756563152a89f39b07cf8893 ]

This patch applies new flag (FLOW_DISSECTOR_KEY_PORTS_RANGE) and
field (tp_range) to BPF flow dissector to generate appropriate flow
keys when classified by specified port ranges.

Fixes: 8ffb055beae5 ("cls_flower: Fix the behavior using port ranges with hw-offload")
Signed-off-by: Yoshiki Komachi <komachi.yoshiki@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Petar Penkov <ppenkov@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200117070533.402240-2-komachi.yoshiki@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpuidle: teo: Avoid using "early hits" incorrectly

[ Upstream commit 63f202e5edf161c2ccffa286a9a701e995427b15 ]

If the current state with the maximum "early hits" metric in
teo_select() is also the one "matching" the expected idle duration,
it will be used as the candidate one for selection even if its
"misses" metric is greater than its "hits" metric, which is not
correct.

In that case, the candidate state should be shallower than the
current one and its "early hits" metric should be the maximum
among the idle states shallower than the current one.

To make that happen, modify teo_select() to save the index of
the state whose "early hits" metric is the maximum for the
range of states below the current one and go back to that state
if it turns out that the current one should be rejected.

Fixes: 159e48560f51 ("cpuidle: teo: Fix "early hits" handling for disabled idle states")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: do not zero f_bavail if we have available space

commit d55966c4279bfc6a0cf0b32bf13f5df228a1eeb6 upstream.

There was some logic added a while ago to clear out f_bavail in statfs()
if we did not have enough free metadata space to satisfy our global
reserve.  This was incorrect at the time, however didn't really pose a
problem for normal file systems because we would often allocate chunks
if we got this low on free metadata space, and thus wouldn't really hit
this case unless we were actually full.

Fast forward to today and now we are much better about not allocating
metadata chunks all of the time.  Couple this with d792b0f19711 ("btrfs:
always reserve our entire size for the global reserve") which now means
we'll easily have a larger global reserve than our free space, we are
now more likely to trip over this while still having plenty of space.

Fix this by skipping this logic if the global rsv's space_info is not
full.  space_info->full is 0 unless we've attempted to allocate a chunk
for that space_info and that has failed.  If this happens then the space
for the global reserve is definitely sacred and we need to report
b_avail == 0, but before then we can just use our calculated b_avail.

Reported-by: Martin Steigerwald <martin@lichtvoll.de>
Fixes: ca8a51b3a979 ("btrfs: statfs: report zero available if metadata are exhausted")
CC: stable@vger.kernel.org # 4.5+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Tested-By: Martin Steigerwald <martin@lichtvoll.de>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: Fix skb->csum update in inet_proto_csum_replace16().

[ Upstream commit 189c9b1e94539b11c80636bc13e9cf47529e7bba ]

skb->csum is updated incorrectly, when manipulation for
NF_NAT_MANIP_SRC\DST is done on IPV6 packet.

Fix:
There is no need to update skb->csum in inet_proto_csum_replace16(),
because update in two fields a.) IPv6 src/dst address and b.) L4 header
checksum cancels each other for skb->csum calculation. Whereas
inet_proto_csum_replace4 function needs to update skb->csum, because
update in 3 fields a.) IPv4 src/dst address, b.) IPv4 Header checksum
and c.) L4 header checksum results in same diff as L4 Header checksum
for skb->csum calculation.

[ pablo@netfilter.org: a few comestic documentation edits ]
Signed-off-by: Praveen Chaudhary <pchaudhary@linkedin.com>
Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
Signed-off-by: Andy Stracner <astracner@linkedin.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables_offload: fix check the chain offload flag

[ Upstream commit c83de17dd6308fb74696923e5245de0e3c427206 ]

In the nft_indr_block_cb the chain should check the flag with
NFT_CHAIN_HW_OFFLOAD.

Fixes: 9a32669fecfb ("netfilter: nf_tables_offload: support indr block call")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: conntrack: sctp: use distinct states for new SCTP connections

[ Upstream commit ab658b9fa7a2c467f79eac8b53ea308b8f98113d ]

The netlink notifications triggered by the INIT and INIT_ACK chunks
for a tracked SCTP association do not include protocol information
for the corresponding connection - SCTP state and verification tags
for the original and reply direction are missing. Since the connection
tracking implementation allows user space programs to receive
notifications about a connection and then create a new connection
based on the values received in a notification, it makes sense that
INIT and INIT_ACK notifications should contain the SCTP state
and verification tags available at the time when a notification
is sent. The missing verification tags cause a newly created
netfilter connection to fail to verify the tags of SCTP packets
when this connection has been created from the values previously
received in an INIT or INIT_ACK notification.

A PROTOINFO event is cached in sctp_packet() when the state
of a connection changes. The CLOSED and COOKIE_WAIT state will
be used for connections that have seen an INIT and INIT_ACK chunk,
respectively. The distinct states will cause a connection state
change in sctp_packet().

Signed-off-by: Jiri Wiesner <jwiesner@suse.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

l2t_seq_next should increase position index

[ Upstream commit 66018a102f7756cf72db4d2704e1b93969d9d332 ]

if seq_file .next fuction does not change position index,
read after some lseek can generate unexpected output.

https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

seq_tab_next() should increase position index

[ Upstream commit 70a87287c821e9721b62463777f55ba588ac4623 ]

if seq_file .next fuction does not change position index,
read after some lseek can generate unexpected output.

https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: fsl/fman: rename IF_MODE_XGMII to IF_MODE_10G

[ Upstream commit 457bfc0a4bf531487ecc3cf82ec728a5e114fb1e ]

As the only 10G PHY interface type defined at the moment the code
was developed was XGMII, although the PHY interface mode used was
not XGMII, XGMII was used in the code to denote 10G. This patch
renames the 10G interface mode to remove the ambiguity.

Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/fsl: treat fsl,erratum-a011043

[ Upstream commit 1d3ca681b9d9575ccf696ebc2840a1ebb1fd4074 ]

When fsl,erratum-a011043 is set, adjust for erratum A011043:
MDIO reads to internal PCS registers may result in having
the MDIO_CFG[MDIO_RD_ER] bit set, even when there is no
error and read data (MDIO_DATA[MDIO_DATA]) is correct.
Software may get false read error when reading internal
PCS registers through MDIO. As a workaround, all internal
MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit.

Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/fsl/dts: add fsl,erratum-a011043

[ Upstream commit 73d527aef68f7644e59f22ce7f9ac75e7b533aea ]

Add fsl,erratum-a011043 to internal MDIO buses.
Software may get false read error when reading internal
PCS registers through MDIO. As a workaround, all internal
MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit.

Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qlcnic: Fix CPU soft lockup while collecting firmware dump

[ Upstream commit 22e984493a41bf8081f13d9ed84def3ca8cfd427 ]

Driver while collecting firmware dump takes longer time to
collect/process some of the firmware dump entries/memories.
Bigger capture masks makes it worse as it results in larger
amount of data being collected and results in CPU soft lockup.
Place cond_resched() in some of the driver flows that are
expectedly time consuming to relinquish the CPU to avoid CPU
soft lockup panic.

Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Tested-by: Yonggen Xu <Yonggen.Xu@dell.com>
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: am43x-epos-evm: set data pin directions for spi0 and spi1

[ Upstream commit b0b03951544534d6d9ad4aa2787eefec988fff20 ]

Set d0 and d1 pin directions for spi0 and spi1 as per their pinmux.

Signed-off-by: Raag Jadav <raagjadav@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

r8152: disable DelayPhyPwrChg

[ Upstream commit aa475d935272481c9ffb1ae54eeca5c1819fbe1a ]

When enabling this, the device would wait an internal signal which
wouldn't be triggered. Then, the device couldn't enter P3 mode, so
the power consumption is increased.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

r8152: avoid the MCU to clear the lanwake

[ Upstream commit 19813162895a696c5814d76e5f8fb6203d70f6e0 ]

Avoid the MCU to clear the lanwake after suspending. It may cause the
WOL fail. Disable LANWAKE_CLR_EN before suspending. Besides,enable it
and reset the lanwake status when resuming or initializing.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

r8152: disable test IO for RTL8153B

[ Upstream commit d7f1b59655efb5a285d227c8f9853a98eab5c2fd ]

For RTL8153B with QFN32, disable test IO. Otherwise, it may cause
abnormal behavior for the device randomly.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

r8152: Disable PLA MCU clock speed down

[ Upstream commit 08997b5eec08a2c29367f19a74abdea54b299406 ]

PLA MCU clock speed down could only be enabled when tx/rx are disabled.
Otherwise, the packet loss may occur.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

r8152: disable U2P3 for RTL8153B

[ Upstream commit 809a7fc6593f288d6f820ef6cc57b9d69b5f9474 ]

Enable U2P3 may miss zero packet for bulk-in.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

r8152: get default setting of WOL before initializing

[ Upstream commit 9583a3638dc07cc1878f41265e85ed497f72efcb ]

Initailization would reset runtime suspend by tp->saved_wolopts, so
the tp->saved_wolopts should be set before initializing.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tee: optee: Fix compilation issue with nommu

[ Upstream commit 9e0caab8e0f96f0af7d1dd388e62f44184a75372 ]

The optee driver uses specific page table types to verify if a memory
region is normal. These types are not defined in nommu systems. Trying
to compile the driver in these systems results in a build error:

  linux/drivers/tee/optee/call.c: In function ‘is_normal_memory’:
  linux/drivers/tee/optee/call.c:533:26: error: ‘L_PTE_MT_MASK’ undeclared
     (first use in this function); did you mean ‘PREEMPT_MASK’?
     return (pgprot_val(p) & L_PTE_MT_MASK) == L_PTE_MT_WRITEALLOC;
                             ^~~~~~~~~~~~~
                             PREEMPT_MASK
  linux/drivers/tee/optee/call.c:533:26: note: each undeclared identifier is
     reported only once for each function it appears in
  linux/drivers/tee/optee/call.c:533:44: error: ‘L_PTE_MT_WRITEALLOC’ undeclared
     (first use in this function)
     return (pgprot_val(p) & L_PTE_MT_MASK) == L_PTE_MT_WRITEALLOC;
                                            ^~~~~~~~~~~~~~~~~~~

Make the optee driver depend on MMU to fix the compilation issue.

Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
[jw: update commit title]
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

led: max77650: add of_match table

[ Upstream commit 2424415d25a765d4302ddfb4de75427e9294dc09 ]

We need the of_match table if we want to use the compatible string in
the pmic's child node and get the led driver loaded automatically.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 8955/1: virt: Relax arch timer version check during early boot

[ Upstream commit 6849b5eba1965ceb0cad3a75877ef4569dd3638e ]

Updates to the Generic Timer architecture allow ID_PFR1.GenTimer to
have values other than 0 or 1 while still preserving backward
compatibility. At the moment, Linux is quite strict in the way it
handles this field at early boot and will not configure arch timer if
it doesn't find the value 1.

Since here use ubfx for arch timer version extraction (hyb-stub build
with -march=armv7-a, so it is safe)

To help backports (even though the code was correct at the time of writing)

Fixes: 8ec58be9f3ff ("ARM: virt: arch_timers: enable access to physical timers")
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: fnic: do not queue commands during fwreset

[ Upstream commit 0e2209629fec427ba75a6351486153a9feddd36b ]

When a link is going down the driver will be calling fnic_cleanup_io(),
which will traverse all commands and calling 'done' for each found command.
While the traversal is handled under the host_lock, calling 'done' happens
after the host_lock is being dropped.

As fnic_queuecommand_lck() is being called with the host_lock held, it
might well be that it will pick the command being selected for abortion
from the above routine and enqueue it for sending, but then 'done' is being
called on that very command from the above routine.

Which of course confuses the hell out of the scsi midlayer.

So fix this by not queueing commands when fnic_cleanup_io is active.

Link: https://lore.kernel.org/r/20200116102053.62755-1-hare@suse.de
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: max77650-onkey - add of_match table

[ Upstream commit ce535a2efb48d8d4c4e4b97e2764d7cee73d9b55 ]

We need the of_match table if we want to use the compatible string in
the pmic's child node and get the onkey driver loaded automatically.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: interface: do not confirm neighbor when do pmtu update

[ Upstream commit 8aaea2b0428b6aad7c7e22d3fddc31a78bb1d724 ]

When do IPv6 tunnel PMTU update and calls __ip6_rt_update_pmtu() in the end,
we should not call dst_confirm_neigh() as there is no two-way communication.

Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm interface: fix packet tx through bpf_redirect()

[ Upstream commit f042365dbffea98fb8148c98c700402e8d099f02 ]

With an ebpf program that redirects packets through a xfrm interface,
packets are dropped because no dst is attached to skb.

This could also be reproduced with an AF_PACKET socket, with the following
python script (xfrm1 is a xfrm interface):

 import socket
 send_s = socket.socket(socket.AF_PACKET, socket.SOCK_RAW, 0)
 # scapy
 # p = IP(src='10.100.0.2', dst='10.200.0.1')/ICMP(type='echo-request')
 # raw(p)
 req = b'E\x00\x00\x1c\x00\x01\x00\x00@\x01e\xb2\nd\x00\x02\n\xc8\x00\x01\x08\x00\xf7\xff\x00\x00\x00\x00'
 send_s.sendto(req, ('xfrm1', 0x800, 0, 0))

It was also not possible to send an ip packet through an AF_PACKET socket
because a LL header was expected. Let's remove those LL header constraints.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vti[6]: fix packet tx through bpf_redirect()

[ Upstream commit 95224166a9032ff5d08fca633d37113078ce7d01 ]

With an ebpf program that redirects packets through a vti[6] interface,
the packets are dropped because no dst is attached.

This could also be reproduced with an AF_PACKET socket, with the following
python script (vti1 is an ip_vti interface):

 import socket
 send_s = socket.socket(socket.AF_PACKET, socket.SOCK_RAW, 0)
 # scapy
 # p = IP(src='10.100.0.2', dst='10.200.0.1')/ICMP(type='echo-request')
 # raw(p)
 req = b'E\x00\x00\x1c\x00\x01\x00\x00@\x01e\xb2\nd\x00\x02\n\xc8\x00\x01\x08\x00\xf7\xff\x00\x00\x00\x00'
 send_s.sendto(req, ('vti1', 0x800, 0, 0))

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: am335x-boneblack-common: fix memory size

[ Upstream commit 5abd45ea0fc3060f7805e131753fdcbafd6c6618 ]

BeagleBone Black series is equipped with 512MB RAM
whereas only 256MB is included from am335x-bone-common.dtsi

This leads to an issue with unusual setups when devicetree
is loaded by GRUB2 directly.

Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: evdev - convert kzalloc()/vzalloc() to kvzalloc()

[ Upstream commit 7f439bc2d7e8c8cc4e1bab08ab7fe1bb73c9b268 ]

We observed a large(order-3) allocation in evdev_open() and it may
cause an OOM kernel panic in kzalloc(), before we getting to the
vzalloc() fallback.

Fix it by converting kzalloc()/vzalloc() to kvzalloc() to avoid the
OOM killer logic as we have a vmalloc fallback.

InputReader invoked oom-killer: gfp_mask=0x240c2c0
(GFP_KERNEL|__GFP_NOWARN|__GFP_COMP|__GFP_ZERO), nodemask=0, order=3,
oom_score_adj=-900
...
(dump_backtrace) from (show_stack+0x18/0x1c)
(show_stack) from (dump_stack+0x94/0xa8)
(dump_stack) from (dump_header+0x7c/0xe4)
(dump_header) from (out_of_memory+0x334/0x348)
(out_of_memory) from (__alloc_pages_nodemask+0xe9c/0xeb8)
(__alloc_pages_nodemask) from (kmalloc_order_trace+0x34/0x128)
(kmalloc_order_trace) from (__kmalloc+0x258/0x36c)
(__kmalloc) from (evdev_open+0x5c/0x17c)
(evdev_open) from (chrdev_open+0x100/0x204)
(chrdev_open) from (do_dentry_open+0x21c/0x354)
(do_dentry_open) from (vfs_open+0x58/0x84)
(vfs_open) from (path_openat+0x640/0xc98)
(path_openat) from (do_filp_open+0x78/0x11c)
(do_filp_open) from (do_sys_open+0x130/0x244)
(do_sys_open) from (SyS_openat+0x14/0x18)
(SyS_openat) from (__sys_trace_return+0x0/0x10)
...
Normal: 12488*4kB (UMEH) 6984*8kB (UMEH) 2101*16kB (UMEH) 0*32kB
0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 139440kB
HighMem: 206*4kB (H) 131*8kB (H) 42*16kB (H) 2*32kB (H) 0*64kB
0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 2608kB
...
Kernel panic - not syncing: Out of memory and no killable processes...

Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: dbg: force stop the debug monitor HW

[ Upstream commit 990aba28f5001f6e90fdd84e13612b560a75deda ]

The driver is required to stop the debug monitor HW recording regardless
of the debug configuration since the driver is responsible to halt the
FW DBGC.

Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: Don't ignore the cap field upon mcc update

[ Upstream commit 2763bba6328c53c455d8f7f5302b80030551c31b ]

When receiving a new MCC driver get all the data about the new country
code and its regulatory information.
Mistakenly, we ignored the cap field, which includes global regulatory
information which should be applies to every channel.
Fix it.

Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: pcie: allocate smaller dev_cmd for TX headers

[ Upstream commit a89c72ffd07369f5ccc74f0332d2785a7077241d ]

As noted in the previous commit, due to the way we allocate the
dev_cmd headers with 324 byte size, and 4/8 byte alignment, the
part we use of them (bytes 20..40-68) could still cross a page
and thus 2^32 boundary.

Address this by using alignment to ensure that the allocation
cannot cross a page boundary, on hardware that's affected. To
make that not cause more memory consumption, reduce the size of
the allocations to the necessary size - we go from 324 bytes in
each allocation to 60/68 on gen2 depending on family, and ~120
or so on gen1 (so on gen1 it's a pure reduction in size, since
we don't need alignment there).

To avoid size and clearing issues, add a new structure that's
just the header, and use kmem_cache_zalloc().

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

XArray: Fix xas_pause at ULONG_MAX

[ Upstream commit 82a22311b7a68a78709699dc8c098953b70e4fd2 ]

If we were unlucky enough to call xas_pause() when the index was at
ULONG_MAX (or a multi-slot entry which ends at ULONG_MAX), we would
wrap the index back around to 0 and restart the iteration from the
beginning.  Use the XAS_BOUNDS state to indicate that we should just
stop the iteration.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: delete temporary files

[ Upstream commit 95f4d9cced96afa9c69b3da8e79e96102c84fc60 ]

Temporary files used in the VDSO build process linger on even after make
mrproper: vdso-dummy.o.tmp, vdso.so.dbg.tmp.

Delete them once they're no longer needed.

Signed-off-by: Ilie Halip <ilie.halip@gmail.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/x86/intel/uncore: Remove PCIe3 unit for SNR

[ Upstream commit 2167f1625c2f04a33145f325db0de285630f7bd1 ]

The PCIe Root Port driver for CPU Complex PCIe Root Ports are not
loaded on SNR.

The device ID for SNR PCIe3 unit is used by both uncore driver and the
PCIe Root Port driver. If uncore driver is loaded, the PCIe Root Port
driver never be probed.

Remove the PCIe3 unit for SNR for now. The support for PCIe3 unit will
be added later separately.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200116200210.18937-2-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/x86/intel/uncore: Add PCI ID of IMC for Xeon E3 V5 Family

[ Upstream commit e74383045119fb8055cf31cb39e0fe951d67163a ]

The IMC uncore support is missed for E3-1585 v5 CPU.

Intel Xeon E3 V5 Family has Sky Lake CPU.
Add the PCI ID of IMC for Intel Xeon E3 V5 Family.

Reported-by: Rosales-fernandez, Carlos <carlos.rosales-fernandez@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Rosales-fernandez, Carlos <carlos.rosales-fernandez@intel.com>
Link: https://lkml.kernel.org/r/1578687311-158748-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wireless: wext: avoid gcc -O3 warning

[ Upstream commit e16119655c9e6c4aa5767cd971baa9c491f41b13 ]

After the introduction of CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3,
the wext code produces a bogus warning:

In function 'iw_handler_get_iwstats',
    inlined from 'ioctl_standard_call' at net/wireless/wext-core.c:1015:9,
    inlined from 'wireless_process_ioctl' at net/wireless/wext-core.c:935:10,
    inlined from 'wext_ioctl_dispatch.part.8' at net/wireless/wext-core.c:986:8,
    inlined from 'wext_handle_ioctl':
net/wireless/wext-core.c:671:3: error: argument 1 null where non-null expected [-Werror=nonnull]
   memcpy(extra, stats, sizeof(struct iw_statistics));
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from arch/x86/include/asm/string.h:5,
net/wireless/wext-core.c: In function 'wext_handle_ioctl':
arch/x86/include/asm/string_64.h:14:14: note: in a call to function 'memcpy' declared here

The problem is that ioctl_standard_call() sometimes calls the handler
with a NULL argument that would cause a problem for iw_handler_get_iwstats.
However, iw_handler_get_iwstats never actually gets called that way.

Marking that function as noinline avoids the warning and leads
to slightly smaller object code as well.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200107200741.3588770-1-arnd@arndb.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: Fix TKIP replay protection immediately after key setup

[ Upstream commit 6f601265215a421f425ba3a4850a35861d024643 ]

TKIP replay protection was skipped for the very first frame received
after a new key is configured. While this is potentially needed to avoid
dropping a frame in some cases, this does leave a window for replay
attacks with group-addressed frames at the station side. Any earlier
frame sent by the AP using the same key would be accepted as a valid
frame and the internal RSC would then be updated to the TSC from that
frame. This would allow multiple previously transmitted group-addressed
frames to be replayed until the next valid new group-addressed frame
from the AP is received by the station.

Fix this by limiting the no-replay-protection exception to apply only
for the case where TSC=0, i.e., when this is for the very first frame
protected using the new key, and the local RSC had not been set to a
higher value when configuring the key (which may happen with GTK).

Signed-off-by: Jouni Malinen <j@w1.fi>
Link: https://lore.kernel.org/r/20200107153545.10934-1-j@w1.fi
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cfg80211: Fix radar event during another phy CAC

[ Upstream commit 26ec17a1dc5ecdd8d91aba63ead6f8b5ad5dea0d ]

In case a radar event of CAC_FINISHED or RADAR_DETECTED
happens during another phy is during CAC we might need
to cancel that CAC.

If we got a radar in a channel that another phy is now
doing CAC on then the CAC should be canceled there.

If, for example, 2 phys doing CAC on the same channels,
or on comptable channels, once on of them will finish his
CAC the other might need to cancel his CAC, since it is no
longer relevant.

To fix that the commit adds an callback and implement it in
mac80211 to end CAC.
This commit also adds a call to said callback if after a radar
event we see the CAC is no longer relevant

Signed-off-by: Orr Mazor <Orr.Mazor@tandemg.com>
Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Link: https://lore.kernel.org/r/20191222145449.15792-1-Orr.Mazor@tandemg.com
[slightly reformat/reword commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wireless: fix enabling channel 12 for custom regulatory domain

[ Upstream commit c4b9d655e445a8be0bff624aedea190606b5ebbc ]

Commit e33e2241e272 ("Revert "cfg80211: Use 5MHz bandwidth by
default when checking usable channels"") fixed a broken
regulatory (leaving channel 12 open for AP where not permitted).
Apply a similar fix to custom regulatory domain processing.

Signed-off-by: Cathy Luo <xiaohua.luo@nxp.com>
Signed-off-by: Ganapathi Bhat <ganapathi.bhat@nxp.com>
Link: https://lore.kernel.org/r/1576836859-8945-1-git-send-email-ganapathi.bhat@nxp.com
[reword commit message, fix coding style, add a comment]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lkdtm/bugs: fix build error in lkdtm_UNSET_SMEP

[ Upstream commit 0e31e3573f0cd94d7b821117db854187ffc85765 ]

When building ARCH=um with CONFIG_UML_X86=y and CONFIG_64BIT=y we get
the build errors:

drivers/misc/lkdtm/bugs.c: In function ‘lkdtm_UNSET_SMEP’:
drivers/misc/lkdtm/bugs.c:288:8: error: implicit declaration of function ‘native_read_cr4’ [-Werror=implicit-function-declaration]
  cr4 = native_read_cr4();
        ^~~~~~~~~~~~~~~
drivers/misc/lkdtm/bugs.c:290:13: error: ‘X86_CR4_SMEP’ undeclared (first use in this function); did you mean ‘X86_FEATURE_SMEP’?
  if ((cr4 & X86_CR4_SMEP) != X86_CR4_SMEP) {
             ^~~~~~~~~~~~
             X86_FEATURE_SMEP
drivers/misc/lkdtm/bugs.c:290:13: note: each undeclared identifier is reported only once for each function it appears in
drivers/misc/lkdtm/bugs.c:297:2: error: implicit declaration of function ‘native_write_cr4’; did you mean ‘direct_write_cr4’? [-Werror=implicit-function-declaration]
  native_write_cr4(cr4);
  ^~~~~~~~~~~~~~~~
  direct_write_cr4

So specify that this block of code should only build when
CONFIG_X86_64=y *AND* CONFIG_UML is unset.

Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Acked-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20191213003522.66450-1-brendanhiggins@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

parisc: Use proper printk format for resource_size_t

[ Upstream commit 4f80b70e1953cb846dbdd1ce72cb17333d4c8d11 ]

resource_size_t should be printed with its own size-independent format
to fix warnings when compiling on 64-bit platform (e.g. with
COMPILE_TEST):

    arch/parisc/kernel/drivers.c: In function 'print_parisc_device':
    arch/parisc/kernel/drivers.c:892:9: warning:
        format '%p' expects argument of type 'void *',
        but argument 4 has type 'resource_size_t {aka unsigned int}' [-Wformat=]

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qmi_wwan: Add support for Quectel RM500Q

[ Upstream commit a9ff44f0e61d074f29770413fef6a5452be7b83e ]

RM500Q is a 5G module from Quectel, supporting both standalone and
non-standalone modes. The normal Quectel quirks apply (DTR and dynamic
interface numbers).

Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: sti: fix possible sleep-in-atomic

[ Upstream commit ce780a47c3c01e1e179d0792df6b853a913928f1 ]

Change mutex and spinlock management to avoid sleep
in atomic issue.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20200113100400.30472-1-arnaud.pouliquen@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: hdac_hda: Fix error in driver removal after failed probe

[ Upstream commit 552b1a85da9f63856e7e341b81c16e0e078204f1 ]

In case system has multiple HDA codecs, and codec probe fails for
at least one but not all codecs, driver will end up cancelling
a non-initialized timer context upon driver removal.

Call trace of typical case:

[   60.593646] WARNING: CPU: 1 PID: 1147 at kernel/workqueue.c:3032
__flush_work+0x18b/0x1a0
[...]
[   60.593670]  __cancel_work_timer+0x11f/0x1a0
[   60.593673]  hdac_hda_dev_remove+0x25/0x30 [snd_soc_hdac_hda]
[   60.593674]  device_release_driver_internal+0xe0/0x1c0
[   60.593675]  bus_remove_device+0xd6/0x140
[   60.593677]  device_del+0x175/0x3e0
[   60.593679]  ? widget_tree_free.isra.7+0x90/0xb0 [snd_hda_core]
[   60.593680]  snd_hdac_device_unregister+0x34/0x50 [snd_hda_core]
[   60.593682]  snd_hdac_ext_bus_device_remove+0x2a/0x60 [snd_hda_ext_core]
[   60.593684]  hda_dsp_remove+0x26/0x100 [snd_sof_intel_hda_common]
[   60.593686]  snd_sof_device_remove+0x84/0xa0 [snd_sof]
[   60.593687]  sof_pci_remove+0x10/0x30 [snd_sof_pci]
[   60.593689]  pci_device_remove+0x36/0xb0

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200110235751.3404-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: Intel: fix HDA codec driver probe with multiple controllers

[ Upstream commit 2c63bea714780f8e1fc9cb7bc10deda26fada25b ]

In case system has multiple HDA controllers, it can happen that
same HDA codec driver is used for codecs of multiple controllers.
In this case, SOF may fail to probe the HDA driver and SOF
initialization fails.

SOF HDA code currently relies that a call to request_module() will
also run device matching logic to attach driver to the codec instance.
However if driver for another HDA controller was already loaded and it
already loaded the HDA codec driver, this breaks current logic in SOF.
In this case the request_module() SOF does becomes a no-op and HDA
Codec driver is not attached to the codec instance sitting on the HDA
bus SOF is controlling. Typical scenario would be a system with both
external and internal GPUs, with driver of the external GPU loaded
first.

Fix this by adding similar logic as is used in legacy HDA driver
where an explicit device_attach() call is done after request_module().

Also add logic to propagate errors reported by device_attach() back
to caller. This also works in the case where drivers are not built
as modules.

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200110235751.3404-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: intel_pmc_core: update Comet Lake platform driver

[ Upstream commit 515ff674bb9bf06186052e352c4587dab8defaf0 ]

Adding new CML CPU model ID into platform driver support list.

Signed-off-by: Harry Pan <harry.pan@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: GPD pocket fan: Allow somewhat lower/higher temperature limits

[ Upstream commit 1f27dbd8265dbb379926c8f6a4453fe7fe26d7a3 ]

Allow the user to configure the fan to turn on / speed-up at lower
thresholds then before (20 degrees Celcius as minimum instead of 40) and
likewise also allow the user to delay the fan speeding-up till the
temperature hits 90 degrees Celcius (was 70).

Cc: Jason Anderson <jasona.594@gmail.com>
Reported-by: Jason Anderson <jasona.594@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: remove current MAC address filter on VF reset

[ Upstream commit 9e05229190380f6b8f702da39aaeb97a0fc80dc3 ]

Currently MAC filters are not altered during a VF reset event. This may
lead to a stale filter when an administratively set MAC is forced by the
PF.

For an administratively set MAC the PF driver deletes the VFs filters,
overwrites the VFs MAC address and triggers a VF reset. However
the VF driver itself is not aware of the filter removal, which is what
the VF reset is for.
The VF reset queues all filters present in the VF driver to be re-added
to the PF filter list (including the filter for the now stale VF MAC
address) and triggers a VIRTCHNL_OP_GET_VF_RESOURCES event, which
provides the new MAC address to the VF.

When this happens i40e will complain and reject the stale MAC filter,
at least in the untrusted VF case.
i40e 0000:08:00.0: Setting MAC 3c:fa:fa:fa:fa:01 on VF 0
iavf 0000:08:02.0: Reset warning received from the PF
iavf 0000:08:02.0: Scheduling reset task
i40e 0000:08:00.0: Bring down and up the VF interface to make this change effective.
i40e 0000:08:00.0: VF attempting to override administratively set MAC address, bring down and up the VF interface to resume normal operation
i40e 0000:08:00.0: VF 0 failed opcode 10, retval: -1
iavf 0000:08:02.0: Failed to add MAC filter, error IAVF_ERR_NVM

To avoid re-adding the stale MAC filter it needs to be removed from the
VF driver's filter list before queuing the existing filters. Then during
the VIRTCHNL_OP_GET_VF_RESOURCES event the correct filter needs to be
added again, at which point the MAC address has been updated.

As a bonus this change makes bringing the VF down and up again
superfluous for the administratively set MAC case.

Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igb: Fix SGMII SFP module discovery for 100FX/LX.

[ Upstream commit 5365ec1aeff5b9f2962a9c9b31d63f9dad7e0e2d ]

Changing the link mode should also be done for 100BaseFX SGMII modules,
otherwise they just don't work when the default link mode in CTRL_EXT
coming from the EEPROM is SERDES.

Additionally 100Base-LX SGMII SFP modules are also supported now, which
was not the case before.

Tested with an i210 using Flexoptix S.1303.2M.G 100FX and
S.1303.10.G 100LX SGMII SFP modules.

Signed-off-by: Manfred Rudigier <manfred.rudigier@omicronenergy.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ixgbe: Fix calculation of queue with VFs and flow director on interface flap

[ Upstream commit 4fad78ad6422d9bca62135bbed8b6abc4cbb85b8 ]

This patch fixes the calculation of queue when we restore flow director
filters after resetting adapter. In ixgbe_fdir_filter_restore(), filter's
vf may be zero which makes the queue outside of the rx_ring array.

The calculation is changed to the same as ixgbe_add_ethtool_fdir_entry().

Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ixgbevf: Remove limit of 10 entries for unicast filter list

[ Upstream commit aa604651d523b1493988d0bf6710339f3ee60272 ]

Currently, though the FDB entry is added to VF, it does not appear in
RAR filters. VF driver only allows to add 10 entries. Attempting to add
another causes an error. This patch removes limitation and allows use of
all free RAR entries for the FDB if needed.

Fixes: 46ec20ff7d ("ixgbevf: Add macvlan support in the set rx mode op")
Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Fix virtchnl_queue_select bitmap validation

[ Upstream commit d9d6a9aed3f66f8ce5fa3ca6ca26007d75032296 ]

Currently in i40e_vc_disable_queues_msg() we are incorrectly
validating the virtchnl queue select bitmaps. The
virtchnl_queue_select rx_queues and tx_queue bitmap is being
compared against ICE_MAX_VF_QUEUES, but the problem is that
these bitmaps can have a value greater than I40E_MAX_VF_QUEUES.
Fix this by comparing the bitmaps against BIT(I40E_MAX_VF_QUEUES).

Also, add the function i40e_vc_validate_vqs_bitmaps() that checks to see
if both virtchnl_queue_select bitmaps are empty along with checking that
the bitmaps only have valid bits set. This function can then be used in
both the queue enable and disable flows.

Suggested-by: Arkady Gilinksky <arkady.gilinsky@harmonicinc.com>
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/zcrypt: move ap device reset from bus to driver code

[ Upstream commit 0c874cd04292c7ee22d70eefc341fa2648f41f46 ]

This patch moves the reset invocation of an ap device when
fresh detected from the ap bus to the probe() function of
the driver responsible for this device.

The virtualisation of ap devices makes it necessary to
remove unconditioned resets on fresh appearing apqn devices.
It may be that such a device is already enabled for guest
usage. So there may be a race condition between host ap bus
and guest ap bus doing the reset. This patch moves the
reset from the ap bus to the zcrypt drivers. So if there
is no zcrypt driver bound to an ap device - for example
the ap device is bound to the vfio device driver - the
ap device is untouched passed to the vfio device driver.

Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: rt5640: Fix NULL dereference on module unload

[ Upstream commit 89b71b3f02d8ae5a08a1dd6f4a2098b7b868d498 ]

The rt5640->jack is NULL if jack is already disabled at the time of
driver's module unloading.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20200106014707.11378-1-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: mmp2: Fix the order of timer mux parents

[ Upstream commit 8bea5ac0fbc5b2103f8779ddff216122e3c2e1ad ]

Determined empirically, no documentation is available.

The OLPC XO-1.75 laptop used parent 1, that one being VCTCXO/4 (65MHz), but
thought it's a VCTCXO/2 (130MHz). The mmp2 timer driver, not knowing
what is going on, ended up just dividing the rate as of
commit f36797ee4380 ("ARM: mmp/mmp2: dt: enable the clock")'

Link: https://lore.kernel.org/r/20191218190454.420358-3-lkundrak@v3.sk
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: mesh: restrict airtime metric to peered established plinks

[ Upstream commit 02a614499600af836137c3fbc4404cd96365fff2 ]

The following warning is triggered every time an unestablished mesh peer
gets dumped. Checks if a peer link is established before retrieving the
airtime link metric.

[ 9563.022567] WARNING: CPU: 0 PID: 6287 at net/mac80211/mesh_hwmp.c:345
               airtime_link_metric_get+0xa2/0xb0 [mac80211]
[ 9563.022697] Hardware name: PC Engines apu2/apu2, BIOS v4.10.0.3
[ 9563.022756] RIP: 0010:airtime_link_metric_get+0xa2/0xb0 [mac80211]
[ 9563.022838] Call Trace:
[ 9563.022897]  sta_set_sinfo+0x936/0xa10 [mac80211]
[ 9563.022964]  ieee80211_dump_station+0x6d/0x90 [mac80211]
[ 9563.023062]  nl80211_dump_station+0x154/0x2a0 [cfg80211]
[ 9563.023120]  netlink_dump+0x17b/0x370
[ 9563.023130]  netlink_recvmsg+0x2a4/0x480
[ 9563.023140]  ____sys_recvmsg+0xa6/0x160
[ 9563.023154]  ___sys_recvmsg+0x93/0xe0
[ 9563.023169]  __sys_recvmsg+0x7e/0xd0
[ 9563.023210]  do_syscall_64+0x4e/0x140
[ 9563.023217]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
Link: https://lore.kernel.org/r/20191203180644.70653-1-markus.theil@tu-ilmenau.de
[rewrite commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: sunxi-ng: h6-r: Fix AR100/R_APB2 parent order

[ Upstream commit 0c545240aebc2ccb8f661dc54283a14d64659804 ]

According to the BSP source code, both the AR100 and R_APB2 clocks have
PLL_PERIPH0 as mux index 3, not 2 as it was on previous chips. The pre-
divider used for PLL_PERIPH0 should be changed to index 3 to match.

This was verified by running a rough benchmark on the AR100 with various
clock settings:

        | mux | pre-divider | iterations/second | clock source |
        |=====|=============|===================|==============|
        |   0 |           0 |  19033   (stable) |       osc24M |
        |   2 |           5 |  11466 (unstable) |  iosc/osc16M |
        |   2 |          17 |  11422 (unstable) |  iosc/osc16M |
        |   3 |           5 |  85338   (stable) |  pll-periph0 |
        |   3 |          17 |  27167   (stable) |  pll-periph0 |

The relative performance numbers all match up (with pll-periph0 running
at its default 600MHz).

Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: sunxi-ng: sun8i-r: Fix divider on APB0 clock

[ Upstream commit 47d64fef1f3ffbdf960d3330b9865fc9f12fdf84 ]

According to the BSP source code, the APB0 clock on the H3 and H5 has a
normal M divider, not a power-of-two divider. This matches the hardware
in the A83T (as described in both the BSP source code and the manual).
Since the A83T and H3/A64 clocks are actually the same, we can merge the
definitions.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rseq: Unregister rseq for clone CLONE_VM

[ Upstream commit 463f550fb47bede3a5d7d5177f363a6c3b45d50b ]

It has been reported by Google that rseq is not behaving properly
with respect to clone when CLONE_VM is used without CLONE_THREAD.

It keeps the prior thread's rseq TLS registered when the TLS of the
thread has moved, so the kernel can corrupt the TLS of the parent.

The approach of clearing the per task-struct rseq registration
on clone with CLONE_THREAD flag is incomplete. It does not cover
the use-case of clone with CLONE_VM set, but without CLONE_THREAD.

Here is the rationale for unregistering rseq on clone with CLONE_VM
flag set:

1) CLONE_THREAD requires CLONE_SIGHAND, which requires CLONE_VM to be
   set. Therefore, just checking for CLONE_VM covers all CLONE_THREAD
   uses. There is no point in checking for both CLONE_THREAD and
   CLONE_VM,

2) There is the possibility of an unlikely scenario where CLONE_SETTLS
   is used without CLONE_VM. In order to be an issue, it would require
   that the rseq TLS is in a shared memory area.

   I do not plan on adding CLONE_SETTLS to the set of clone flags which
   unregister RSEQ, because it would require that we also unregister RSEQ
   on set_thread_area(2) and arch_prctl(2) ARCH_SET_FS for completeness.
   So rather than doing a partial solution, it appears better to let
   user-space explicitly perform rseq unregistration across clone if
   needed in scenarios where CLONE_VM is not set.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191211161713.4490-3-mathieu.desnoyers@efficios.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools lib traceevent: Fix memory leakage in filter_event

[ Upstream commit f84ae29a6169318f9c929720c49d96323d2bbab9 ]

It is necessary to call free_arg(arg) when add_filter_type() returns NULL
in filter_event().

Signed-off-by: Hewenliang <hewenliang4@huawei.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Feilong Lin <linfeilong@huawei.com>
Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Link: http://lore.kernel.org/lkml/20191209063549.59941-1-hewenliang4@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: ti: wkup_m3_ipc: Fix race condition with rproc_boot

[ Upstream commit 03729cfa0d543bc996bf959e762ec999afc8f3d2 ]

Any user of wkup_m3_ipc calls wkup_m3_ipc_get to get a handle and this
checks the value of the static variable m3_ipc_state to see if the
wkup_m3 is ready. Currently this is populated during probe before
rproc_boot has been called, meaning there is a window of time that
wkup_m3_ipc_get can return a valid handle but the wkup_m3 itself is not
ready, leading to invalid IPC calls to the wkup_m3 and system
instability.

To avoid this, move the population of the m3_ipc_state variable until
after rproc_boot has succeeded to guarantee a valid and usable handle
is always returned.

Reported-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: beagle-x15-common: Model 5V0 regulator

[ Upstream commit e17e7c498d4f734df93c300441e100818ed58168 ]

On am57xx-beagle-x15, 5V0 is connected to P16, P17, P18 and P19
connectors. On am57xx-evm, 5V0 regulator is used to get 3V6 regulator
which is connected to the COMQ port. Model 5V0 regulator here in order
for it to be used in am57xx-evm to model 3V6 regulator.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: am57xx-beagle-x15/am57xx-idk: Remove "gpios" for endpoint dt nodes

[ Upstream commit 81cc0877840f72210e809bbedd6346d686560fc1 ]

PERST# line in the PCIE connector is driven by the host mode and not
EP mode. The gpios property here is used for driving the PERST# line.
Remove gpios property from all endpoint device tree nodes.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: sun8i: a83t: Correct USB3503 GPIOs polarity

[ Upstream commit 1c226017d3ec93547b58082bdf778d9db7401c95 ]

Current USB3503 driver ignores GPIO polarity and always operates as if the
GPIO lines were flagged as ACTIVE_HIGH. Fix the polarity for the existing
USB3503 chip applications to match the chip specification and common
convention for naming the pins. The only pin, which has to be ACTIVE_LOW
is the reset pin. The remaining are ACTIVE_HIGH. This change allows later
to fix the USB3503 driver to properly use generic GPIO bindings and read
polarity from DT.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: meson-sm1-sei610: add gpio bluetooth interrupt

[ Upstream commit 30388cc075720aa0af4f2cb5933afa1f8f39d313 ]

add gpio irq to support interrupt trigger mode.

Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: sunxi-ng: v3s: Fix incorrect number of hw_clks.

[ Upstream commit 4ff40d140e2a2060ef6051800a4a9eab07624f42 ]

The hws field of sun8i_v3s_hw_clks has only 74
members. However, the number specified by CLK_NUMBER
is 77 (= CLK_I2S0 + 1). This leads to runtime segmentation
fault that is not always reproducible.

This patch fixes the problem by specifying correct clock number.

Signed-off-by: Yunhao Tian <18373444@buaa.edu.cn>
[Maxime: Also remove the CLK_NUMBER definition]
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cgroup: Prevent double killing of css when enabling threaded cgroup

commit 3bc0bb36fa30e95ca829e9cf480e1ef7f7638333 upstream.

The test_cgcore_no_internal_process_constraint_on_threads selftest when
running with subsystem controlling noise triggers two warnings:

> [  597.443115] WARNING: CPU: 1 PID: 28167 at kernel/cgroup/cgroup.c:3131 cgroup_apply_control_enable+0xe0/0x3f0
> [  597.443413] WARNING: CPU: 1 PID: 28167 at kernel/cgroup/cgroup.c:3177 cgroup_apply_control_disable+0xa6/0x160

Both stem from a call to cgroup_type_write. The first warning was also
triggered by syzkaller.

When we're switching cgroup to threaded mode shortly after a subsystem
was disabled on it, we can see the respective subsystem css dying there.

The warning in cgroup_apply_control_enable is harmless in this case
since we're not adding new subsys anyway.
The warning in cgroup_apply_control_disable indicates an attempt to kill
css of recently disabled subsystem repeatedly.

The commit prevents these situations by making cgroup_type_write wait
for all dying csses to go away before re-applying subtree controls.
When at it, the locations of WARN_ON_ONCE calls are moved so that
warning is triggered only when we are about to misuse the dying css.

Reported-by: syzbot+5493b2a54d31d6aea629@syzkaller.appspotmail.com
Reported-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: Fix race condition in hci_release_sock()

commit 11eb85ec42dc8c7a7ec519b90ccf2eeae9409de8 upstream.

Syzbot managed to trigger a use after free "KASAN: use-after-free Write
in hci_sock_bind".  I have reviewed the code manually and one possibly
cause I have found is that we are not holding lock_sock(sk) when we do
the hci_dev_put(hdev) in hci_sock_release().  My theory is that the bind
and the release are racing against each other which results in this use
after free.

Reported-by: syzbot+eba992608adf3d796bcc@syzkaller.appspotmail.com
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ttyprintk: fix a potential deadlock in interrupt context issue

commit 9a655c77ff8fc65699a3f98e237db563b37c439b upstream.

tpk_write()/tpk_close() could be interrupted when holding a mutex, then
in timer handler tpk_write() may be called again trying to acquire same
mutex, lead to deadlock.

Google syzbot reported this issue with CONFIG_DEBUG_ATOMIC_SLEEP
enabled:

BUG: sleeping function called from invalid context at
kernel/locking/mutex.c:938
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 0, name: swapper/1
1 lock held by swapper/1/0:
...
Call Trace:
  <IRQ>
  dump_stack+0x197/0x210
  ___might_sleep.cold+0x1fb/0x23e
  __might_sleep+0x95/0x190
  __mutex_lock+0xc5/0x13c0
  mutex_lock_nested+0x16/0x20
  tpk_write+0x5d/0x340
  resync_tnc+0x1b6/0x320
  call_timer_fn+0x1ac/0x780
  run_timer_softirq+0x6c3/0x1790
  __do_softirq+0x262/0x98c
  irq_exit+0x19b/0x1e0
  smp_apic_timer_interrupt+0x1a3/0x610
  apic_timer_interrupt+0xf/0x20
  </IRQ>

See link https://syzkaller.appspot.com/bug?extid=2eeef62ee31f9460ad65 for
more details.

Fix it by using spinlock in process context instead of mutex and having
interrupt disabled in critical section.

Reported-by: syzbot+2eeef62ee31f9460ad65@syzkaller.appspotmail.com
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200113034842.435-1-zhenzhong.duan@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tomoyo: Use atomic_t for statistics counter

commit a8772fad0172aeae339144598b809fd8d4823331 upstream.

syzbot is reporting that there is a race at tomoyo_stat_update() [1].
Although it is acceptable to fail to track exact number of times policy
was updated, convert to atomic_t because this is not a hot path.

[1] https://syzkaller.appspot.com/bug?id=a4d7b973972eeed410596e6604580e0133b0fc04

Reported-by: syzbot <syzbot+efea72d4a0a1d03596cd@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>