Su Hui [Fri, 12 Jan 2024 04:19:27 +0000 (12:19 +0800)]
scsi: isci: Fix an error code problem in isci_io_request_build()
[ Upstream commit
658365c6b0857e6a306436e315a8633937e3af42 ]
Clang static complains that Value stored to 'status' is never read. Return
'status' rather than 'SCI_SUCCESS'.
Fixes:
f1f52e75939b ("isci: uplevel request infrastructure")
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20240112041926.3924315-1-suhui@nfschina.com
Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexandre Ghiti [Thu, 18 Jan 2024 21:21:20 +0000 (22:21 +0100)]
riscv: Fix build error on rv32 + XIP
[ Upstream commit
66f962d8939fd2ac74de901d30d30310c8ddca79 ]
commit
66f1e6809397 ("riscv: Make XIP bootable again") restricted page
offset to the sv39 page offset instead of the default sv57, which makes
sense since probably the platforms that target XIP kernels do not
support anything else than sv39 and we do not try to find out the
largest address space supported on XIP kernels (ie set_satp_mode()).
But PAGE_OFFSET_L3 is not defined for rv32, so fix the build error by
restoring the previous behaviour which picks CONFIG_PAGE_OFFSET for rv32.
Fixes:
66f1e6809397 ("riscv: Make XIP bootable again")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/linux-riscv/
344dca85-5c48-44e1-bc64-
4fa7973edd12@infradead.org/T/#u
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20240118212120.2087803-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jonathan Kim [Thu, 14 Dec 2023 03:08:03 +0000 (22:08 -0500)]
drm/amdkfd: only flush mes process context if mes support is there
[ Upstream commit
24149412dfc71f7f4a54868702e9145e396263d3 ]
Fix up on mes process context flush to prevent non-mes devices from
spamming error messages or running into undefined behaviour during
process termination.
Fixes:
bd33bb1409b4 ("drm/amdkfd: fix mes set shader debugger process management")
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stephen Rothwell [Tue, 19 Dec 2023 03:57:34 +0000 (14:57 +1100)]
drm: using mul_u32_u32() requires linux/math64.h
[ Upstream commit
933a2a376fb3f22ba4774f74233571504ac56b02 ]
Some pending include file cleanups produced this error:
In file included from include/linux/kernel.h:27,
from drivers/gpu/ipu-v3/ipu-dp.c:7:
include/drm/drm_color_mgmt.h: In function 'drm_color_lut_extract':
include/drm/drm_color_mgmt.h:45:46: error: implicit declaration of function 'mul_u32_u32' [-Werror=implicit-function-declaration]
45 | return DIV_ROUND_CLOSEST_ULL(mul_u32_u32(user_input, (1 << bit_precision) - 1),
| ^~~~~~~~~~~
Fixes:
c6fbb6bca108 ("drm: Fix color LUT rounding")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231219145734.13e40e1e@canb.auug.org.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
Edward Adam Davis [Wed, 3 Jan 2024 12:13:51 +0000 (20:13 +0800)]
wifi: cfg80211: fix RCU dereference in __cfg80211_bss_update
[ Upstream commit
1184950e341c11b6f82bc5b59564411d9537ab27 ]
Replace rcu_dereference() with rcu_access_pointer() since we hold
the lock here (and aren't in an RCU critical section).
Fixes:
32af9a9e1069 ("wifi: cfg80211: free beacon_ies when overridden from hidden BSS")
Reported-and-tested-by: syzbot+864a269c27ee06b58374@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Link: https://msgid.link/tencent_BF8F0DF0258C8DBF124CDDE4DD8D992DCF07@qq.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peter Zijlstra [Wed, 22 Nov 2023 10:07:56 +0000 (11:07 +0100)]
perf: Fix the nr_addr_filters fix
[ Upstream commit
388a1fb7da6aaa1970c7e2a7d7fcd983a87a8484 ]
Thomas reported that commit
652ffc2104ec ("perf/core: Fix narrow
startup race when creating the perf nr_addr_filters sysfs file") made
the entire attribute group vanish, instead of only the nr_addr_filters
attribute.
Additionally a stray return.
Insufficient coffee was involved with both writing and merging the
patch.
Fixes:
652ffc2104ec ("perf/core: Fix narrow startup race when creating the perf nr_addr_filters sysfs file")
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lkml.kernel.org/r/20231122100756.GP8262@noisy.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tim Lunn [Sun, 3 Dec 2023 12:39:59 +0000 (23:39 +1100)]
i2c: rk3x: Adjust mask/value offset for i2c2 on rv1126
[ Upstream commit
92a85b7c6262f19c65a1c115cf15f411ba65a57c ]
Rockchip RV1126 is using old style i2c controller, the i2c2
bus uses a non-sequential offset in the grf register for the
mask/value bits for this bus.
This patch fixes i2c2 bus on rv1126 SoCs.
Signed-off-by: Tim Lunn <tim@feathertop.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Srinivasan Shanmugam [Tue, 9 Jan 2024 11:27:26 +0000 (16:57 +0530)]
drm/amdkfd: Fix 'node' NULL check in 'svm_range_get_range_boundaries()'
[ Upstream commit
d7a254fad873775ce6c32b77796c81e81e6b7f2e ]
Range interval [start, last] is ordered by rb_tree, rb_prev, rb_next
return value still needs NULL check, thus modified from "node" to "rb_node".
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_svm.c:2691 svm_range_get_range_boundaries() warn: can 'node' even be NULL?
Suggested-by: Philip Yang <Philip.Yang@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Srinivasan Shanmugam [Thu, 21 Dec 2023 12:43:11 +0000 (18:13 +0530)]
drm/amdgpu: Release 'adev->pm.fw' before return in 'amdgpu_device_need_post()'
[ Upstream commit
8a44fdd3cf91debbd09b43bd2519ad2b2486ccf4 ]
In function 'amdgpu_device_need_post(struct amdgpu_device *adev)' -
'adev->pm.fw' may not be released before return.
Using the function release_firmware() to release adev->pm.fw.
Thus fixing the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:1571 amdgpu_device_need_post() warn: 'adev->pm.fw' from request_firmware() not released on lines: 1554.
Cc: Monk Liu <Monk.Liu@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Srinivasan Shanmugam [Thu, 4 Jan 2024 09:56:42 +0000 (15:26 +0530)]
drm/amdgpu: Fix with right return code '-EIO' in 'amdgpu_gmc_vram_checking()'
[ Upstream commit
fac4ebd79fed60e79cccafdad45a2bb8d3795044 ]
The amdgpu_gmc_vram_checking() function in emulation checks whether
all of the memory range of shared system memory could be accessed by
GPU, from this aspect, -EIO is returned for error scenarios.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c:919 gmc_v6_0_hw_init() warn: missing error code? 'r'
drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c:1103 gmc_v7_0_hw_init() warn: missing error code? 'r'
drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c:1223 gmc_v8_0_hw_init() warn: missing error code? 'r'
drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:2344 gmc_v9_0_hw_init() warn: missing error code? 'r'
Cc: Xiaojian Du <Xiaojian.Du@amd.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Srinivasan Shanmugam [Fri, 5 Jan 2024 06:35:09 +0000 (12:05 +0530)]
drm/amd/powerplay: Fix kzalloc parameter 'ATOM_Tonga_PPM_Table' in 'get_platform_power_management_table()'
[ Upstream commit
6616b5e1999146b1304abe78232af810080c67e3 ]
In 'struct phm_ppm_table *ptr' allocation using kzalloc, an incorrect
structure type is passed to sizeof() in kzalloc, larger structure types
were used, thus using correct type 'struct phm_ppm_table' fixes the
below:
drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/process_pptables_v1_0.c:203 get_platform_power_management_table() warn: struct type mismatch 'phm_ppm_table vs _ATOM_Tonga_PPM_Table'
Cc: Eric Huang <JinHuiEric.Huang@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alex Deucher [Mon, 2 Oct 2023 18:27:13 +0000 (14:27 -0400)]
drm/amdgpu: fix avg vs input power reporting on smu7
[ Upstream commit
25852d4b97572ff62ffee574cb8bb4bc551af23a ]
Hawaii, Bonaire, Fiji, and Tonga support average power, the others
support current power.
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wenchao Hao [Thu, 23 Nov 2023 01:53:40 +0000 (09:53 +0800)]
ceph: fix invalid pointer access if get_quota_realm return ERR_PTR
[ Upstream commit
0f4cf64eabc6e16cfc2704f1960e82dc79d91c8d ]
This issue is reported by smatch that get_quota_realm() might return
ERR_PTR but we did not handle it. It's not a immediate bug, while we
still should address it to avoid potential bugs if get_quota_realm()
is changed to return other ERR_PTR in future.
Set ceph_snap_realm's pointer in get_quota_realm()'s to address this
issue, the pointer would be set to NULL if get_quota_realm() failed
to get struct ceph_snap_realm, so no ERR_PTR would happen any more.
[ xiubli: minor code style clean up ]
Signed-off-by: Wenchao Hao <haowenchao2@huawei.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xiubo Li [Fri, 17 Nov 2023 05:26:18 +0000 (13:26 +0800)]
ceph: fix deadlock or deadcode of misusing dget()
[ Upstream commit
b493ad718b1f0357394d2cdecbf00a44a36fa085 ]
The lock order is incorrect between denty and its parent, we should
always make sure that the parent get the lock first.
But since this deadcode is never used and the parent dir will always
be set from the callers, let's just remove it.
Link: https://lore.kernel.org/r/20231116081919.GZ1957730@ZenIV
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Venky Shankar [Mon, 6 Nov 2023 04:32:32 +0000 (10:02 +0530)]
ceph: reinitialize mds feature bit even when session in open
[ Upstream commit
f48e0342a74d7770cdf1d11894bdc3b6d989b29e ]
Following along the same lines as per the user-space fix. Right
now this isn't really an issue with the ceph kernel driver because
of the feature bit laginess, however, that can change over time
(when the new snaprealm info type is ported to the kernel driver)
and depending on the MDS version that's being upgraded can cause
message decoding issues - so, fix that early on.
Link: http://tracker.ceph.com/issues/63188
Signed-off-by: Venky Shankar <vshankar@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ming Lei [Fri, 12 Jan 2024 12:26:26 +0000 (20:26 +0800)]
blk-mq: fix IO hang from sbitmap wakeup race
[ Upstream commit
5266caaf5660529e3da53004b8b7174cab6374ed ]
In blk_mq_mark_tag_wait(), __add_wait_queue() may be re-ordered
with the following blk_mq_get_driver_tag() in case of getting driver
tag failure.
Then in __sbitmap_queue_wake_up(), waitqueue_active() may not observe
the added waiter in blk_mq_mark_tag_wait() and wake up nothing, meantime
blk_mq_mark_tag_wait() can't get driver tag successfully.
This issue can be reproduced by running the following test in loop, and
fio hang can be observed in < 30min when running it on my test VM
in laptop.
modprobe -r scsi_debug
modprobe scsi_debug delay=0 dev_size_mb=4096 max_queue=1 host_max_queue=1 submit_queues=4
dev=`ls -d /sys/bus/pseudo/drivers/scsi_debug/adapter*/host*/target*/*/block/* | head -1 | xargs basename`
fio --filename=/dev/"$dev" --direct=1 --rw=randrw --bs=4k --iodepth=1 \
--runtime=100 --numjobs=40 --time_based --name=test \
--ioengine=libaio
Fix the issue by adding one explicit barrier in blk_mq_mark_tag_wait(), which
is just fine in case of running out of tag.
Cc: Jan Kara <jack@suse.cz>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Reported-by: Changhui Zhong <czhong@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240112122626.4181044-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhu Yanjun [Thu, 4 Jan 2024 02:09:02 +0000 (10:09 +0800)]
virtio_net: Fix "‘%d’ directive writing between 1 and 11 bytes into a region of size 10" warnings
[ Upstream commit
e3fe8d28c67bf6c291e920c6d04fa22afa14e6e4 ]
Fix the warnings when building virtio_net driver.
"
drivers/net/virtio_net.c: In function ‘init_vqs’:
drivers/net/virtio_net.c:4551:48: warning: ‘%d’ directive writing between 1 and 11 bytes into a region of size 10 [-Wformat-overflow=]
4551 | sprintf(vi->rq[i].name, "input.%d", i);
| ^~
In function ‘virtnet_find_vqs’,
inlined from ‘init_vqs’ at drivers/net/virtio_net.c:4645:8:
drivers/net/virtio_net.c:4551:41: note: directive argument in the range [-
2147483643, 65534]
4551 | sprintf(vi->rq[i].name, "input.%d", i);
| ^~~~~~~~~~
drivers/net/virtio_net.c:4551:17: note: ‘sprintf’ output between 8 and 18 bytes into a destination of size 16
4551 | sprintf(vi->rq[i].name, "input.%d", i);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/virtio_net.c: In function ‘init_vqs’:
drivers/net/virtio_net.c:4552:49: warning: ‘%d’ directive writing between 1 and 11 bytes into a region of size 9 [-Wformat-overflow=]
4552 | sprintf(vi->sq[i].name, "output.%d", i);
| ^~
In function ‘virtnet_find_vqs’,
inlined from ‘init_vqs’ at drivers/net/virtio_net.c:4645:8:
drivers/net/virtio_net.c:4552:41: note: directive argument in the range [-
2147483643, 65534]
4552 | sprintf(vi->sq[i].name, "output.%d", i);
| ^~~~~~~~~~~
drivers/net/virtio_net.c:4552:17: note: ‘sprintf’ output between 9 and 19 bytes into a destination of size 16
4552 | sprintf(vi->sq[i].name, "output.%d", i);
"
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Link: https://lore.kernel.org/r/20240104020902.2753599-1-yanjun.zhu@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Philip Yang [Fri, 29 Dec 2023 20:19:25 +0000 (15:19 -0500)]
drm/amdkfd: Fix lock dependency warning with srcu
[ Upstream commit
2a9de42e8d3c82c6990d226198602be44f43f340 ]
======================================================
WARNING: possible circular locking dependency detected
6.5.0-kfd-yangp #2289 Not tainted
------------------------------------------------------
kworker/0:2/996 is trying to acquire lock:
(srcu){.+.+}-{0:0}, at: __synchronize_srcu+0x5/0x1a0
but task is already holding lock:
((work_completion)(&svms->deferred_list_work)){+.+.}-{0:0}, at:
process_one_work+0x211/0x560
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 ((work_completion)(&svms->deferred_list_work)){+.+.}-{0:0}:
__flush_work+0x88/0x4f0
svm_range_list_lock_and_flush_work+0x3d/0x110 [amdgpu]
svm_range_set_attr+0xd6/0x14c0 [amdgpu]
kfd_ioctl+0x1d1/0x630 [amdgpu]
__x64_sys_ioctl+0x88/0xc0
-> #2 (&info->lock#2){+.+.}-{3:3}:
__mutex_lock+0x99/0xc70
amdgpu_amdkfd_gpuvm_restore_process_bos+0x54/0x740 [amdgpu]
restore_process_helper+0x22/0x80 [amdgpu]
restore_process_worker+0x2d/0xa0 [amdgpu]
process_one_work+0x29b/0x560
worker_thread+0x3d/0x3d0
-> #1 ((work_completion)(&(&process->restore_work)->work)){+.+.}-{0:0}:
__flush_work+0x88/0x4f0
__cancel_work_timer+0x12c/0x1c0
kfd_process_notifier_release_internal+0x37/0x1f0 [amdgpu]
__mmu_notifier_release+0xad/0x240
exit_mmap+0x6a/0x3a0
mmput+0x6a/0x120
do_exit+0x322/0xb90
do_group_exit+0x37/0xa0
__x64_sys_exit_group+0x18/0x20
do_syscall_64+0x38/0x80
-> #0 (srcu){.+.+}-{0:0}:
__lock_acquire+0x1521/0x2510
lock_sync+0x5f/0x90
__synchronize_srcu+0x4f/0x1a0
__mmu_notifier_release+0x128/0x240
exit_mmap+0x6a/0x3a0
mmput+0x6a/0x120
svm_range_deferred_list_work+0x19f/0x350 [amdgpu]
process_one_work+0x29b/0x560
worker_thread+0x3d/0x3d0
other info that might help us debug this:
Chain exists of:
srcu --> &info->lock#2 --> (work_completion)(&svms->deferred_list_work)
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock((work_completion)(&svms->deferred_list_work));
lock(&info->lock#2);
lock((work_completion)(&svms->deferred_list_work));
sync(srcu);
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Felix Kuehling [Tue, 2 Jan 2024 20:07:44 +0000 (15:07 -0500)]
drm/amdkfd: Fix lock dependency warning
[ Upstream commit
47bf0f83fc86df1bf42b385a91aadb910137c5c9 ]
======================================================
WARNING: possible circular locking dependency detected
6.5.0-kfd-fkuehlin #276 Not tainted
------------------------------------------------------
kworker/8:2/2676 is trying to acquire lock:
ffff9435aae95c88 ((work_completion)(&svm_bo->eviction_work)){+.+.}-{0:0}, at: __flush_work+0x52/0x550
but task is already holding lock:
ffff9435cd8e1720 (&svms->lock){+.+.}-{3:3}, at: svm_range_deferred_list_work+0xe8/0x340 [amdgpu]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&svms->lock){+.+.}-{3:3}:
__mutex_lock+0x97/0xd30
kfd_ioctl_alloc_memory_of_gpu+0x6d/0x3c0 [amdgpu]
kfd_ioctl+0x1b2/0x5d0 [amdgpu]
__x64_sys_ioctl+0x86/0xc0
do_syscall_64+0x39/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
-> #1 (&mm->mmap_lock){++++}-{3:3}:
down_read+0x42/0x160
svm_range_evict_svm_bo_worker+0x8b/0x340 [amdgpu]
process_one_work+0x27a/0x540
worker_thread+0x53/0x3e0
kthread+0xeb/0x120
ret_from_fork+0x31/0x50
ret_from_fork_asm+0x11/0x20
-> #0 ((work_completion)(&svm_bo->eviction_work)){+.+.}-{0:0}:
__lock_acquire+0x1426/0x2200
lock_acquire+0xc1/0x2b0
__flush_work+0x80/0x550
__cancel_work_timer+0x109/0x190
svm_range_bo_release+0xdc/0x1c0 [amdgpu]
svm_range_free+0x175/0x180 [amdgpu]
svm_range_deferred_list_work+0x15d/0x340 [amdgpu]
process_one_work+0x27a/0x540
worker_thread+0x53/0x3e0
kthread+0xeb/0x120
ret_from_fork+0x31/0x50
ret_from_fork_asm+0x11/0x20
other info that might help us debug this:
Chain exists of:
(work_completion)(&svm_bo->eviction_work) --> &mm->mmap_lock --> &svms->lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&svms->lock);
lock(&mm->mmap_lock);
lock(&svms->lock);
lock((work_completion)(&svm_bo->eviction_work));
I believe this cannot really lead to a deadlock in practice, because
svm_range_evict_svm_bo_worker only takes the mmap_read_lock if the BO
refcount is non-0. That means it's impossible that svm_range_bo_release
is running concurrently. However, there is no good way to annotate this.
To avoid the problem, take a BO reference in
svm_range_schedule_evict_svm_bo instead of in the worker. That way it's
impossible for a BO to get freed while eviction work is pending and the
cancel_work_sync call in svm_range_bo_release can be eliminated.
v2: Use svm_bo_ref_unless_zero and explained why that's safe. Also
removed redundant checks that are already done in
amdkfd_fence_enable_signaling.
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ian Rogers [Fri, 8 Dec 2023 00:05:13 +0000 (16:05 -0800)]
libsubcmd: Fix memory leak in uniq()
[ Upstream commit
ad30469a841b50dbb541df4d6971d891f703c297 ]
uniq() will write one command name over another causing the overwritten
string to be leaked. Fix by doing a pass that removes duplicates and a
second that removes the holes.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chenyuan Mi <cymi20@fudan.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231208000515.1693746-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Sun, 24 Dec 2023 18:34:02 +0000 (19:34 +0100)]
misc: lis3lv02d_i2c: Add missing setting of the reg_ctrl callback
[ Upstream commit
b1b9f7a494400c0c39f8cd83de3aaa6111c55087 ]
The lis3lv02d_i2c driver was missing a line to set the lis3_dev's
reg_ctrl callback.
lis3_reg_ctrl(on) is called from the init callback, but due to
the missing reg_ctrl callback the regulators where never turned off
again leading to the following oops/backtrace when detaching the driver:
[ 82.313527] ------------[ cut here ]------------
[ 82.313546] WARNING: CPU: 1 PID: 1724 at drivers/regulator/core.c:2396 _regulator_put+0x219/0x230
...
[ 82.313695] RIP: 0010:_regulator_put+0x219/0x230
...
[ 82.314767] Call Trace:
[ 82.314770] <TASK>
[ 82.314772] ? _regulator_put+0x219/0x230
[ 82.314777] ? __warn+0x81/0x170
[ 82.314784] ? _regulator_put+0x219/0x230
[ 82.314791] ? report_bug+0x18d/0x1c0
[ 82.314801] ? handle_bug+0x3c/0x80
[ 82.314806] ? exc_invalid_op+0x13/0x60
[ 82.314812] ? asm_exc_invalid_op+0x16/0x20
[ 82.314845] ? _regulator_put+0x219/0x230
[ 82.314857] regulator_bulk_free+0x39/0x60
[ 82.314865] i2c_device_remove+0x22/0xb0
Add the missing setting of the callback so that the regulators
properly get turned off again when not used.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231224183402.95640-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yinbo Zhu [Thu, 28 Dec 2023 07:11:13 +0000 (15:11 +0800)]
usb: xhci-plat: fix usb disconnect issue after s4
[ Upstream commit
6d6887c42e946f43bed2e64571a40c8476a1e4a9 ]
The xhci retaining bogus hardware states cause usb disconnect devices
connected before hibernation(s4) and refer to the commit '
f3d478858be
("usb: ohci-platform: fix usb disconnect issue after s4")' which set
flag "hibernated" as true when resume-from-hibernation and that the
drivers will reset the hardware to get rid of any existing state and
make sure resume from hibernation re-enumerates everything for xhci.
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Link: https://lore.kernel.org/r/20231228071113.1719-1-zhuyinbo@loongson.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Howells [Tue, 2 Jan 2024 20:33:17 +0000 (20:33 +0000)]
9p: Fix initialisation of netfs_inode for 9p
[ Upstream commit
9546ac78b232bac56ff975072b1965e0e755ebd4 ]
The 9p filesystem is calling netfs_inode_init() in v9fs_init_inode() -
before the struct inode fields have been initialised from the obtained file
stats (ie. after v9fs_stat2inode*() has been called), but netfslib wants to
set a couple of its fields from i_size.
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Dominique Martinet <asmadeus@codewreck.org>
Acked-by: Dominique Martinet <asmadeus@codewreck.org>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: v9fs@lists.linux.dev
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bjorn Helgaas [Wed, 6 Dec 2023 22:42:30 +0000 (16:42 -0600)]
PCI/AER: Decode Requester ID when no error info found
[ Upstream commit
1291b716bbf969e101d517bfb8ba18d958f758b8 ]
When a device with AER detects an error, it logs error information in its
own AER Error Status registers. It may send an Error Message to the Root
Port (RCEC in the case of an RCiEP), which logs the fact that an Error
Message was received (Root Error Status) and the Requester ID of the
message source (Error Source Identification).
aer_print_port_info() prints the Requester ID from the Root Port Error
Source in the usual Linux "bb:dd.f" format, but when find_source_device()
finds no error details in the hierarchy below the Root Port, it printed the
raw Requester ID without decoding it.
Decode the Requester ID in the usual Linux format so it matches other
messages.
Sample message changes:
- pcieport 0000:00:1c.5: AER: Correctable error received: 0000:00:1c.5
- pcieport 0000:00:1c.5: AER: can't find device of ID00e5
+ pcieport 0000:00:1c.5: AER: Correctable error message received from 0000:00:1c.5
+ pcieport 0000:00:1c.5: AER: found no error details for 0000:00:1c.5
Link: https://lore.kernel.org/r/20231206224231.732765-3-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ilpo Järvinen [Tue, 2 Jan 2024 17:27:00 +0000 (19:27 +0200)]
PCI: Fix 64GT/s effective data rate calculation
[ Upstream commit
ac4f1897fa5433a1b07a625503a91b6aa9d7e643 ]
Unlike the lower rates, the PCIe 64GT/s Data Rate uses 1b/1b encoding, not
128b/130b (PCIe r6.1 sec 1.2, Table 1-1). Correct the PCIE_SPEED2MBS_ENC()
calculation to reflect that.
Link: https://lore.kernel.org/r/20240102172701.65501-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yu-Che Cheng [Wed, 6 Dec 2023 23:17:25 +0000 (15:17 -0800)]
spmi: mediatek: Fix UAF on device remove
[ Upstream commit
e821d50ab5b956ed0effa49faaf29912fd4106d9 ]
The pmif driver data that contains the clocks is allocated along with
spmi_controller.
On device remove, spmi_controller will be freed first, and then devres
, including the clocks, will be cleanup.
This leads to UAF because putting the clocks will access the clocks in
the pmif driver data, which is already freed along with spmi_controller.
This can be reproduced by enabling DEBUG_TEST_DRIVER_REMOVE and
building the kernel with KASAN.
Fix the UAF issue by using unmanaged clk_bulk_get() and putting the
clocks before freeing spmi_controller.
Reported-by: Fei Shao <fshao@chromium.org>
Signed-off-by: Yu-Che Cheng <giver@chromium.org>
Link: https://lore.kernel.org/r/20230717173934.1.If004a6e055a189c7f2d0724fa814422c26789839@changeid
Tested-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20231206231733.4031901-3-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Max Kellermann [Fri, 8 Dec 2023 09:33:10 +0000 (10:33 +0100)]
fs/kernfs/dir: obey S_ISGID
[ Upstream commit
5133bee62f0ea5d4c316d503cc0040cac5637601 ]
Handling of S_ISGID is usually done by inode_init_owner() in all other
filesystems, but kernfs doesn't use that function. In kernfs, struct
kernfs_node is the primary data structure, and struct inode is only
created from it on demand. Therefore, inode_init_owner() can't be
used and we need to imitate its behavior.
S_ISGID support is useful for the cgroup filesystem; it allows
subtrees managed by an unprivileged process to retain a certain owner
gid, which then enables sharing access to the subtree with another
unprivileged process.
--
v1 -> v2: minor coding style fix (comment)
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20231208093310.297233-2-max.kellermann@ionos.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Adrian Reber [Fri, 8 Dec 2023 14:36:56 +0000 (15:36 +0100)]
tty: allow TIOCSLCKTRMIOS with CAP_CHECKPOINT_RESTORE
[ Upstream commit
e0f25b8992345aa5f113da2815f5add98738c611 ]
The capability CAP_CHECKPOINT_RESTORE was introduced to allow non-root
users to checkpoint and restore processes as non-root with CRIU.
This change extends CAP_CHECKPOINT_RESTORE to enable the CRIU option
'--shell-job' as non-root. CRIU's man-page describes the '--shell-job'
option like this:
Allow one to dump shell jobs. This implies the restored task will
inherit session and process group ID from the criu itself. This option
also allows to migrate a single external tty connection, to migrate
applications like top.
TIOCSLCKTRMIOS can only be done if the process has CAP_SYS_ADMIN and
this change extends it to CAP_SYS_ADMIN or CAP_CHECKPOINT_RESTORE.
With this change it is possible to checkpoint and restore processes
which have a tty connection as non-root if CAP_CHECKPOINT_RESTORE is
set.
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Adrian Reber <areber@redhat.com>
Acked-by: Andrei Vagin <avagin@gmail.com>
Link: https://lore.kernel.org/r/20231208143656.1019-1-areber@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jo Van Bulck [Thu, 5 Oct 2023 15:38:50 +0000 (17:38 +0200)]
selftests/sgx: Fix linker script asserts
[ Upstream commit
9fd552ee32c6c1e27c125016b87d295bea6faea7 ]
DEFINED only considers symbols, not section names. Hence, replace the
check for .got.plt with the _GLOBAL_OFFSET_TABLE_ symbol and remove other
(non-essential) asserts.
Signed-off-by: Jo Van Bulck <jo.vanbulck@cs.kuleuven.be>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/all/20231005153854.25566-10-jo.vanbulck%40cs.kuleuven.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hardik Gajjar [Tue, 5 Dec 2023 18:18:29 +0000 (19:18 +0100)]
usb: hub: Add quirk to decrease IN-ep poll interval for Microchip USB491x hub
[ Upstream commit
855d75cf8311fee156fabb5639bb53757ca83dd4 ]
There is a potential delay in notifying Linux USB drivers of downstream
USB bus activity when connecting a high-speed or superSpeed device via the
Microchip USB491x hub. This delay is due to the fixed bInterval value of
12 in the silicon of the Microchip USB491x hub.
Microchip requested to ignore the device descriptor and decrease that
value to 9 as it was too late to modify that in silicon.
This patch speeds up the USB enummeration process that helps to pass
Apple Carplay certifications and improve the User experience when utilizing
the USB device via Microchip Multihost USB491x Hub.
A new hub quirk HUB_QUIRK_REDUCE_FRAME_INTR_BINTERVAL speeds up
the notification process for Microchip USB491x hub by limiting
the maximum bInterval value to 9.
Signed-off-by: Hardik Gajjar <hgajjar@de.adit-jv.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20231205181829.127353-2-hgajjar@de.adit-jv.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hardik Gajjar [Tue, 5 Dec 2023 18:18:28 +0000 (19:18 +0100)]
usb: hub: Replace hardcoded quirk value with BIT() macro
[ Upstream commit
6666ea93d2c422ebeb8039d11e642552da682070 ]
This patch replaces the hardcoded quirk value in the macro with
BIT().
Signed-off-by: Hardik Gajjar <hgajjar@de.adit-jv.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20231205181829.127353-1-hgajjar@de.adit-jv.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yaxiong Tian [Fri, 24 Nov 2023 01:49:13 +0000 (09:49 +0800)]
extcon: fix possible name leak in extcon_dev_register()
[ Upstream commit
e66523c72c9aae0ff0dae6859eb77b04de1e8e5f ]
In the error path after calling dev_set_name(), the device
name is leaked. To fix this, moving dev_set_name() after the
error path and before device_register.
Link: https://lore.kernel.org/lkml/TYZPR01MB4784ADCD3E951E0863F3DB72D5B8A@TYZPR01MB4784.apcprd01.prod.exchangelabs.com/
Signed-off-by: Yaxiong Tian <tianyaxiong@kylinos.cn>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
James Clark [Fri, 1 Sep 2023 13:37:15 +0000 (14:37 +0100)]
perf cs-etm: Bump minimum OpenCSD version to ensure a bugfix is present
[ Upstream commit
2dbba30fd69b604802a9535b74bddb5bcca23793 ]
Since commit
d927ef5004ef ("perf cs-etm: Add exception level consistency
check"), the exception that was added to Perf will be triggered unless
the following bugfix from OpenCSD is present:
- _Version 1.2.1_:
- __Bugfix__:
ETM4x / ETE - output of context elements to client can in some
circumstances be delayed until after subsequent atoms have been
processed leading to incorrect memory decode access via the client
callbacks. Fixed to flush context elements immediately they are
committed.
Rather than remove the assert and silently fail, just increase the
minimum version requirement to avoid hard to debug issues and
regressions.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230901133716.677499-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniel Stodden [Wed, 22 Nov 2023 04:23:16 +0000 (20:23 -0800)]
PCI: switchtec: Fix stdev_release() crash after surprise hot remove
[ Upstream commit
df25461119d987b8c81d232cfe4411e91dcabe66 ]
A PCI device hot removal may occur while stdev->cdev is held open. The call
to stdev_release() then happens during close or exit, at a point way past
switchtec_pci_remove(). Otherwise the last ref would vanish with the
trailing put_device(), just before return.
At that later point in time, the devm cleanup has already removed the
stdev->mmio_mrpc mapping. Also, the stdev->pdev reference was not a counted
one. Therefore, in DMA mode, the iowrite32() in stdev_release() will cause
a fatal page fault, and the subsequent dma_free_coherent(), if reached,
would pass a stale &stdev->pdev->dev pointer.
Fix by moving MRPC DMA shutdown into switchtec_pci_remove(), after
stdev_kill(). Counting the stdev->pdev ref is now optional, but may prevent
future accidents.
Reproducible via the script at
https://lore.kernel.org/r/
20231113212150.96410-1-dns@arista.com
Link: https://lore.kernel.org/r/20231122042316.91208-2-dns@arista.com
Signed-off-by: Daniel Stodden <dns@arista.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guilherme G. Piccoli [Mon, 20 Nov 2023 16:04:36 +0000 (13:04 -0300)]
PCI: Only override AMD USB controller if required
[ Upstream commit
e585a37e5061f6d5060517aed1ca4ccb2e56a34c ]
By running a Van Gogh device (Steam Deck), the following message
was noticed in the kernel log:
pci 0000:04:00.3: PCI class overridden (0x0c03fe -> 0x0c03fe) so dwc3 driver can claim this instead of xhci
Effectively this means the quirk executed but changed nothing, since the
class of this device was already the proper one (likely adjusted by newer
firmware versions).
Check and perform the override only if necessary.
Link: https://lore.kernel.org/r/20231120160531.361552-1-gpiccoli@igalia.com
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Vicki Pfau <vi@endrift.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xiaowu.ding [Tue, 12 Dec 2023 11:37:22 +0000 (19:37 +0800)]
mailbox: arm_mhuv2: Fix a bug for mhuv2_sender_interrupt
[ Upstream commit
ee01c0b4384d19ecc5dfa7db3fd4303f965c3eba ]
Message Handling Unit version is v2.1.
When arm_mhuv2 working with the data protocol transfer mode.
We have split one mhu into two channels, and every channel
include four channel windows, the two channels share
one gic spi interrupt.
There is a problem with the sending scenario.
The first channel will take up 0-3 channel windows, and the second
channel take up 4-7 channel windows. When the first channel send the
data, and the receiver will clear all the four channels status.
Although we only enabled the interrupt on the last channel window with
register CH_INT_EN,the register CHCOMB_INT_ST0 will be 0xf, not be 0x8.
Currently we just clear the last channel windows int status with the
data proctol mode.So after that,the CHCOMB_INT_ST0 status will be 0x7,
not be the 0x0.
Then the second channel send the data, the receiver read the
data, clear all the four channel windows status, trigger the sender
interrupt. But currently the CHCOMB_INT_ST0 register will be 0xf7,
get_irq_chan_comb function will always return the first channel.
So this patch clear all channel windows int status to avoid this interrupt
confusion.
Signed-off-by: Xiaowu.ding <xiaowu.ding@jaguarmicro.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peter Robinson [Wed, 20 Dec 2023 15:56:39 +0000 (15:56 +0000)]
mfd: ti_am335x_tscadc: Fix TI SoC dependencies
[ Upstream commit
284d16c456e5d4b143f375b8ccc4038ab3f4ee0f ]
The ti_am335x_tscadc is specific to some TI SoCs, update
the dependencies for those SoCs and compile testing.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20231220155643.445849-1-pbrobinson@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Oleksandr Tyshchenko [Sun, 7 Jan 2024 10:34:26 +0000 (12:34 +0200)]
xen/gntdev: Fix the abuse of underlying struct page in DMA-buf import
[ Upstream commit
2d2db7d40254d5fb53b11ebd703cd1ed0c5de7a1 ]
DO NOT access the underlying struct page of an sg table exported
by DMA-buf in dmabuf_imp_to_refs(), this is not allowed.
Please see drivers/dma-buf/dma-buf.c:mangle_sg_table() for details.
Fortunately, here (for special Xen device) we can avoid using
pages and calculate gfns directly from dma addresses provided by
the sg table.
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://lore.kernel.org/r/20240107103426.2038075-1-olekstysh@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Frederik Haxel [Tue, 12 Dec 2023 13:01:12 +0000 (14:01 +0100)]
riscv: Make XIP bootable again
[ Upstream commit
66f1e68093979816a23412a3fad066f5bcbc0360 ]
Currently, the XIP kernel seems to fail to boot due to missing
XIP_FIXUP and a wrong page_offset value. A superfluous XIP_FIXUP
has also been removed.
Signed-off-by: Frederik Haxel <haxel@fzi.de>
Link: https://lore.kernel.org/r/20231212130116.848530-2-haxel@fzi.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Harshit Shah [Sat, 30 Dec 2023 09:11:23 +0000 (14:41 +0530)]
i3c: master: cdns: Update maximum prescaler value for i2c clock
[ Upstream commit
374c13f9080a1b9835a5ed3e7bea93cf8e2dc262 ]
As per the Cadence IP document fixed the I2C clock divider value limit from
16 bits instead of 10 bits. Without this change setting up the I2C clock to
low frequencies will not work as the prescaler value might be greater than
10 bit number.
I3C clock divider value is 10 bits only. Updating the macro names for both.
Signed-off-by: Harshit Shah <harshitshah.opendev@gmail.com>
Link: https://lore.kernel.org/r/1703927483-28682-1-git-send-email-harshitshah.opendev@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johannes Berg [Wed, 25 Oct 2023 20:45:05 +0000 (22:45 +0200)]
um: time-travel: fix time corruption
[ Upstream commit
abe4eaa8618bb36c2b33e9cdde0499296a23448c ]
In 'basic' time-travel mode (without =inf-cpu or =ext), we
still get timer interrupts. These can happen at arbitrary
points in time, i.e. while in timer_read(), which pushes
time forward just a little bit. Then, if we happen to get
the interrupt after calculating the new time to push to,
but before actually finishing that, the interrupt will set
the time to a value that's incompatible with the forward,
and we'll crash because time goes backwards when we do the
forwarding.
Fix this by reading the time_travel_time, calculating the
adjustment, and doing the adjustment all with interrupts
disabled.
Reported-by: Vincent Whitchurch <Vincent.Whitchurch@axis.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nathan Chancellor [Wed, 6 Dec 2023 16:49:46 +0000 (09:49 -0700)]
um: net: Fix return type of uml_net_start_xmit()
[ Upstream commit
7d748f60a4b82b50bf25fad1bd42d33f049f76aa ]
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
warning in clang aims to catch these at compile time, which reveals:
arch/um/drivers/net_kern.c:353:21: warning: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Wincompatible-function-pointer-types-strict]
353 | .ndo_start_xmit = uml_net_start_xmit,
| ^~~~~~~~~~~~~~~~~~
1 warning generated.
->ndo_start_xmit() in 'struct net_device_ops' expects a return type of
'netdev_tx_t', not 'int'. Adjust the return type of uml_net_start_xmit()
to match the prototype's to resolve the warning. While UML does not
currently implement support for kCFI, it could in the future, which
means this warning becomes a fatal CFI failure at run time.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/
202310031340.v1vPh207-lkp@intel.com/
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Benjamin Berg [Fri, 10 Nov 2023 11:03:41 +0000 (12:03 +0100)]
um: Don't use vfprintf() for os_info()
[ Upstream commit
236f9fe39b02c15fa5530b53e9cca48354394389 ]
The threads allocated inside the kernel have only a single page of
stack. Unfortunately, the vfprintf function in standard glibc may use
too much stack-space, overflowing it.
To make os_info safe to be used by helper threads, use the kernel
vscnprintf function into a smallish buffer and write out the information
to stderr.
Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anton Ivanov [Thu, 21 Sep 2023 14:34:44 +0000 (15:34 +0100)]
um: Fix naming clash between UML and scheduler
[ Upstream commit
541d4e4d435c8b9bfd29f70a1da4a2db97794e0a ]
__cant_sleep was already used and exported by the scheduler.
The name had to be changed to a UML specific one.
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Reviewed-by: Peter Lafreniere <peter@n8pjl.ca>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Heiner Kallweit [Sat, 16 Dec 2023 20:05:33 +0000 (21:05 +0100)]
leds: trigger: panic: Don't register panic notifier if creating the trigger failed
[ Upstream commit
afacb21834bb02785ddb0c3ec197208803b74faa ]
It doesn't make sense to register the panic notifier if creating the
panic trigger failed.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/8a61e229-5388-46c7-919a-4d18cc7362b2@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andy Shevchenko [Wed, 22 Nov 2023 17:50:36 +0000 (19:50 +0200)]
pinctrl: baytrail: Fix types of config value in byt_pin_config_set()
[ Upstream commit
1a856a22e6036c5f0d6da7568b4550270f989038 ]
When unpacked, the config value is split to two of different types.
Fix the types accordingly.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
bo liu [Mon, 8 Jan 2024 11:02:35 +0000 (19:02 +0800)]
ALSA: hda/conexant: Fix headset auto detect fail in cx8070 and SN6140
[ Upstream commit
7aeb259086487417f0fecf66e325bee133e8813a ]
When OMTP headset plugin the headset jack of CX8070 and SN6160 sound cards,
the headset type detection circuit will recognize the headset type as CTIA.
At this point, plugout and plugin the headset will get the correct headset
type as OMTP.
The reason for the failure of headset type recognition is that the sound
card creation will enable the VREF voltage of the headset mic, which
interferes with the headset type automatic detection circuit. Plugout and
plugin the headset will restart the headset detection and get the correct
headset type.
The patch is disable the VREF voltage when the headset is not present, and
will enable the VREF voltage when the headset is present.
Signed-off-by: bo liu <bo.liu@senarytech.com>
Link: https://lore.kernel.org/r/20240108110235.3867-1-bo.liu@senarytech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alex Deucher [Wed, 3 Jan 2024 16:55:53 +0000 (11:55 -0500)]
drm/amdgpu: apply the RV2 system aperture fix to RN/CZN as well
[ Upstream commit
16783d8ef08448815e149e40c82fc1e1fc41ddbf ]
These chips needs the same fix. This was previously not seen
on then since the AGP aperture expanded the system aperture,
but this showed up again when AGP was disabled.
Reviewed-and-tested-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Srinivasan Shanmugam [Fri, 29 Dec 2023 09:37:09 +0000 (15:07 +0530)]
drm/amdkfd: Fix iterator used outside loop in 'kfd_add_peer_prop()'
[ Upstream commit
b1a428b45dc7e47c7acc2ad0d08d8a6dda910c4c ]
Fix the following about iterator use:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:1456 kfd_add_peer_prop() warn: iterator used outside loop: 'iolink3'
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Srinivasan Shanmugam [Wed, 27 Dec 2023 07:24:44 +0000 (12:54 +0530)]
drm/amdgpu: Drop 'fence' check in 'to_amdgpu_amdkfd_fence()'
[ Upstream commit
bf2ad4fb8adca89374b54b225d494e0b1956dbea ]
Return value of container_of(...) can't be null, so null check is not
required for 'fence'. Hence drop its NULL check.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_fence.c:93 to_amdgpu_amdkfd_fence() warn: can 'fence' even be NULL?
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Srinivasan Shanmugam [Wed, 3 Jan 2024 16:52:44 +0000 (22:22 +0530)]
drm/amdgpu: Fix '*fw' from request_firmware() not released in 'amdgpu_ucode_request()'
[ Upstream commit
13a1851f923d9a7a78a477497295c2dfd16ad4a4 ]
Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c:1404 amdgpu_ucode_request() warn: '*fw' from request_firmware() not released on lines: 1404.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ivan Lipski [Mon, 2 Oct 2023 17:47:54 +0000 (13:47 -0400)]
Re-revert "drm/amd/display: Enable Replay for static screen use cases"
[ Upstream commit
d6398866a6b47e92319ef6efdb0126a4fbb7796a ]
This reverts commit
44e60b14d5a72f91fd0bdeae8da59ae37a3ca8e5.
Since, it causes a regression in which eDP displays with PSR support,
but no Replay support (Sink support <= 0x03), fail to enable PSR and
consequently all IGT amd_psr tests fail. So, revert this until a more
suitable fix can be found.
This got brought back accidently with the backmerge.
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Ivan Lipski <ivlipski@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Felix Kuehling [Mon, 18 Dec 2023 21:17:23 +0000 (16:17 -0500)]
drm/amdgpu: Let KFD sync with VM fences
[ Upstream commit
ec9ba4821fa52b5efdbc4cdf0a77497990655231 ]
Change the rules for amdgpu_sync_resv to let KFD synchronize with VM
fences on page table reservations. This fixes intermittent memory
corruption after evictions when using amdgpu_vm_handle_moved to update
page tables for VM mappings managed through render nodes.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Meenakshikumar Somasundaram [Mon, 4 Dec 2023 15:57:45 +0000 (10:57 -0500)]
drm/amd/display: Fix minor issues in BW Allocation Phase2
[ Upstream commit
aa5dc05340eb97486a631ce6bccb8d020bf6b56b ]
[Why]
Fix minor issues in BW Allocation Phase2.
[How]
- In set_usb4_req_bw_req(), link->dpia_bw_alloc_config.response_ready
flag should be reset before writing DPCD REQUEST_BW.
- Fix the granularity for value of 2 in get_bw_granularity().
- Removed bandwidth allocation support display fw boot option as
the fw would read feature enable status from bios.
- Clean up DPIA_EST_BW_CHANGED and DPIA_BW_REQ_SUCCESS cases in
dpia_handle_bw_alloc_response().
- Removed allocate_usb4_bw and deallocate_usb4_bw.
- Optimized loop in get_lowest_dpia_index().
- Updated link_dp_dpia_allocate_usb4_bandwidth_for_stream() and
set_usb4_req_bw_req() to always issue request bw.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: PeiChen Huang <peichen.huang@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stanley.Yang [Fri, 15 Dec 2023 08:13:23 +0000 (16:13 +0800)]
drm/amdgpu: Fix ecc irq enable/disable unpaired
[ Upstream commit
a32c6f7f5737cc7e31cd7ad5133f0d96fca12ea6 ]
The ecc_irq is disabled while GPU mode2 reset suspending process,
but not be enabled during GPU mode2 reset resume process.
Changed from V1:
only do sdma/gfx ras_late_init in aldebaran_mode2_restore_ip
delete amdgpu_ras_late_resume function
Changed from V2:
check umc ras supported before put ecc_irq
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexander Stein [Mon, 18 Dec 2023 12:24:07 +0000 (13:24 +0100)]
clk: imx: clk-imx8qxp: fix LVDS bypass, pixel and phy clocks
[ Upstream commit
3f5f63adeea7e7aa715e101ffe4b4ac9705f9664 ]
To be compatible with SCU firmware based on 1.15 a different clock
routing for LVDS is needed.
Signed-off-by: Oliver F. Brown <oliver.brown@oss.nxp.com>
Signed-off-by: Ranjani Vaidyanathan <ranjani.vaidyanathan@nxp.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20231218122407.2757175-1-alexander.stein@ew.tq-group.com/
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alvin Lee [Fri, 8 Dec 2023 16:56:56 +0000 (11:56 -0500)]
drm/amd/display: Only clear symclk otg flag for HDMI
[ Upstream commit
dff45f03f508c92cd8eb2050e27b726726b8ae0b ]
[Description]
There is a corner case where the symclk otg flag is cleared
when disabling the phantom pipe for subvp (because the phantom
and main pipe share the same link). This is undesired because
we need the maintain the correct symclk otg flag state for
the main pipe.
For now only clear the flag only for HDMI signal type, since
it's only set for HDMI signal type (phantom is virtual). The
ideal solution is to not clear it if the stream is phantom but
currently there's a bug that doesn't allow us to do this. Once
this issue is fixed the proper fix can be implemented.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Josip Pavic [Tue, 5 Dec 2023 17:01:05 +0000 (12:01 -0500)]
drm/amd/display: make flip_timestamp_in_us a 64-bit variable
[ Upstream commit
6fb12518ca58412dc51054e2a7400afb41328d85 ]
[Why]
This variable currently overflows after about 71 minutes. This doesn't
cause any known functional issues but it does make debugging more
difficult.
[How]
Make it a 64-bit variable.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Josip Pavic <josip.pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Oded Gabbay [Mon, 30 Oct 2023 10:23:57 +0000 (12:23 +0200)]
accel/habanalabs: add support for Gaudi2C device
[ Upstream commit
42422993cf28d456778ee9168d73758ec037cd51 ]
Gaudi2 with PCI revision ID with the value of '3' represents Gaudi2C
device and should be detected and initialized as Gaudi2.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Werner Fischer [Wed, 13 Dec 2023 09:45:25 +0000 (10:45 +0100)]
watchdog: it87_wdt: Keep WDTCTRL bit 3 unmodified for IT8784/IT8786
[ Upstream commit
d12971849d71781c1e4ffd1117d4878ce233d319 ]
WDTCTRL bit 3 sets the mode choice for the clock input of IT8784/IT8786.
Some motherboards require this bit to be set to 1 (= PCICLK mode),
otherwise the watchdog functionality gets broken. The BIOS of those
motherboards sets WDTCTRL bit 3 already to 1.
Instead of setting all bits of WDTCTRL to 0 by writing 0x00 to it, keep
bit 3 of it unchanged for IT8784/IT8786 chips. In this way, bit 3 keeps
the status as set by the BIOS of the motherboard.
Watchdog tests have been successful with this patch with the following
systems:
IT8784: Thomas-Krenn LES plus v2 (YANLING YL-KBRL2 V2)
IT8786: Thomas-Krenn LES plus v3 (YANLING YL-CLU L2)
IT8786: Thomas-Krenn LES network 6L v2 (YANLING YL-CLU6L)
Link: https://lore.kernel.org/all/140b264d-341f-465b-8715-dacfe84b3f71@roeck-us.net/
Signed-off-by: Werner Fischer <devlists@wefi.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231213094525.11849-4-devlists@wefi.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ben Dooks [Wed, 22 Nov 2023 08:51:18 +0000 (08:51 +0000)]
watchdog: starfive: add lock annotations to fix context imbalances
[ Upstream commit
f77999887235f8c378af343df11a6bcedda5b284 ]
Add the necessary __acquires() and __releases() to the functions
that take and release the wdt lock to avoid the following sparse
warnings:
drivers/watchdog/starfive-wdt.c:204:13: warning: context imbalance in 'starfive_wdt_unlock' - wrong count at exit
drivers/watchdog/starfive-wdt.c:212:9: warning: context imbalance in 'starfive_wdt_lock' - unexpected unlock
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231122085118.177589-1-ben.dooks@codethink.co.uk
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kuan-Wei Chiu [Sun, 10 Dec 2023 17:52:32 +0000 (01:52 +0800)]
clk: mmp: pxa168: Fix memory leak in pxa168_clk_init()
[ Upstream commit
2fbabea626b6467eb4e6c4cb7a16523da12e43b4 ]
In cases where mapping of mpmu/apmu/apbc registers fails, the code path
does not handle the failure gracefully, potentially leading to a memory
leak. This fix ensures proper cleanup by freeing the allocated memory
for 'pxa_unit' before returning.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Link: https://lore.kernel.org/r/20231210175232.3414584-1-visitorckw@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kuan-Wei Chiu [Sun, 10 Dec 2023 16:50:40 +0000 (00:50 +0800)]
clk: hi3620: Fix memory leak in hi3620_mmc_clk_init()
[ Upstream commit
bfbea9e5667cfa9552c3d88f023386f017f6c308 ]
In cases where kcalloc() fails for the 'clk_data->clks' allocation, the
code path does not handle the failure gracefully, potentially leading
to a memory leak. This fix ensures proper cleanup by freeing the
allocated memory for 'clk_data' before returning.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Link: https://lore.kernel.org/r/20231210165040.3407545-1-visitorckw@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wang, Beyond [Tue, 12 Dec 2023 13:03:04 +0000 (21:03 +0800)]
drm/amdgpu: fix ftrace event amdgpu_bo_move always move on same heap
[ Upstream commit
94aeb4117343d072e3a35b9595bcbfc0058ee724 ]
Issue: during evict or validate happened on amdgpu_bo, the 'from' and
'to' is always same in ftrace event of amdgpu_bo_move
where calling the 'trace_amdgpu_bo_move', the comment says move_notify
is called before move happens, but actually it is called after move
happens, here the new_mem is same as bo->resource
Fix: move trace_amdgpu_bo_move from move_notify to amdgpu_bo_move
Signed-off-by: Wang, Beyond <Wang.Beyond@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Abhinav Kumar [Tue, 12 Dec 2023 20:52:41 +0000 (12:52 -0800)]
drm/msm/dpu: fix writeback programming for YUV cases
[ Upstream commit
79caf2f2202b9eaad3a5a726e4b33807f67d0f1b ]
For YUV cases, setting the required format bits was missed
out in the register programming. Lets fix it now in preparation
of adding YUV formats support for writeback.
changes in v2:
- dropped the fixes tag as its not a fix but adding
new functionality
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/571814/
Link: https://lore.kernel.org/r/20231212205254.12422-4-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rob Clark [Mon, 11 Dec 2023 18:19:55 +0000 (10:19 -0800)]
drm/msm/dpu: Ratelimit framedone timeout msgs
[ Upstream commit
2b72e50c62de60ad2d6bcd86aa38d4ccbdd633f2 ]
When we start getting these, we get a *lot*. So ratelimit it to not
flood dmesg.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/571584/
Link: https://lore.kernel.org/r/20231211182000.218088-1-robdclark@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Baryshkov [Sun, 3 Dec 2023 00:27:43 +0000 (03:27 +0300)]
drm/msm/dpu: enable writeback on SM8450
[ Upstream commit
eaa647cdbf2e357b4a14903f2f1e47ed9c4f8df3 ]
Enable WB2 hardware block, enabling writeback support on this platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/570187/
Link: https://lore.kernel.org/r/20231203002743.1291956-4-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Baryshkov [Sun, 3 Dec 2023 00:27:42 +0000 (03:27 +0300)]
drm/msm/dpu: enable writeback on SM8350
[ Upstream commit
c2949a49dfe960e952400029e14751dceff79d38 ]
Enable WB2 hardware block, enabling writeback support on this platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/570188/
Link: https://lore.kernel.org/r/20231203002743.1291956-3-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jonathan Kim [Tue, 5 Dec 2023 17:22:07 +0000 (12:22 -0500)]
drm/amdkfd: fix mes set shader debugger process management
[ Upstream commit
bd33bb1409b494558a2935f7bbc7842def957fcd ]
MES provides the driver a call to explicitly flush stale process memory
within the MES to avoid a race condition that results in a fatal
memory violation.
When SET_SHADER_DEBUGGER is called, the driver passes a memory address
that represents a process context address MES uses to keep track of
future per-process calls.
Normally, MES will purge its process context list when the last queue
has been removed. The driver, however, can call SET_SHADER_DEBUGGER
regardless of whether a queue has been added or not.
If SET_SHADER_DEBUGGER has been called with no queues as the last call
prior to process termination, the passed process context address will
still reside within MES.
On a new process call to SET_SHADER_DEBUGGER, the driver may end up
passing an identical process context address value (based on per-process
gpu memory address) to MES but is now pointing to a new allocated buffer
object during KFD process creation. Since the MES is unaware of this,
access of the passed address points to the stale object within MES and
triggers a fatal memory violation.
The solution is for KFD to explicitly flush the process context address
from MES on process termination.
Note that the flush call and the MES debugger calls use the same MES
interface but are separated as KFD calls to avoid conflicting with each
other.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Tested-by: Alice Wong <shiwei.wong@amd.com>
Reviewed-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alvin Lee [Wed, 6 Dec 2023 19:52:32 +0000 (14:52 -0500)]
drm/amd/display: Force p-state disallow if leaving no plane config
[ Upstream commit
9a902a9073c287353e25913c0761bfed49d75a88 ]
[Description]
- When we're in a no plane config, DCN is always asserting
P-State allow
- This creates a scenario where the P-State blackout can start
just as VUPDATE takes place and transitions the DCN config to
a one where one or more HUBP's are active which can result in
underflow
- To fix this issue, force p-state disallow and unforce after
the transition from no planes case -> one or more planes active
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alvin Lee [Wed, 6 Dec 2023 19:52:31 +0000 (14:52 -0500)]
drm/amd/display: For prefetch mode > 0, extend prefetch if possible
[ Upstream commit
dd4e4bb28843393065eed279e869fac248d03f0f ]
[Description]
For mode programming we want to extend the prefetch as much as possible
(up to oto, or as long as we can for equ) if we're not already applying
the 60us prefetch requirement. This is to avoid intermittent underflow
issues during prefetch.
The prefetch extension is applied under the following scenarios:
1. We're in prefetch mode 1 (i.e. we don't support MCLK switch in blank)
2. We're using subvp or drr methods of p-state switch, in which case we
we don't care if prefetch takes up more of the blanking time
Mode programming typically chooses the smallest prefetch time possible
(i.e. highest bandwidth during prefetch) presumably to create margin between
p-states / c-states that happen in vblank and prefetch. Therefore we only
apply this prefetch extension when p-state in vblank is not required (UCLK
p-states take up the most vblank time).
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kieran Bingham [Mon, 11 Dec 2023 12:59:48 +0000 (18:29 +0530)]
media: i2c: imx335: Fix hblank min/max values
[ Upstream commit
d7b95ad7a8d56248dfc34f861e445fad7a4004f4 ]
The V4L2_CID_HBLANK control is marked as readonly and can only be a
single value.
Set the minimum and maximum value to match the mode value.
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Su Hui [Fri, 20 Oct 2023 09:17:23 +0000 (17:17 +0800)]
media: ddbridge: fix an error code problem in ddb_probe
[ Upstream commit
09b4195021be69af1e1936cca995712a6d0f2562 ]
Error code is assigned to 'stat', return 'stat' rather than '-1'.
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ming Qian [Fri, 8 Dec 2023 07:33:42 +0000 (15:33 +0800)]
media: amphion: remove mutext lock in condition of wait_event
[ Upstream commit
f9c8ddce2fe3b767582f299d03fc8fb85943568c ]
mutext_lock should not be called in condition of wait_event, otherwise,
when CONFIG_DEBUG_ATOMIC_SLEEP is enabled, we may meet the following
warning:
do not call blocking ops when !TASK_RUNNING; state=2
WARNING: CPU: 5 PID: 741 at kernel/sched/core.c:9859
__might_sleep+0x80/0xa4
Hardware name: Freescale i.MX8QM MEK (DT)
pstate:
60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc :
__might_sleep+0x80/0xa4 lr : __might_sleep+0x80/0xa4 sp :
ffffffc0123738a0
x29:
ffffffc0123738a0 x28:
ffffffc009194c48 x27:
ffffffc00bbc1050
x26:
ffffff8814b282f0 x25:
ffffff8814b280d0 x24:
ffffff8814b28080
x23:
0000000000000001 x22:
0000000000000032 x21:
ffffffc00bbc1000
x20:
000000000000011b x19:
ffffffc009324670 x18:
00000000fffffffd
x17:
30303c5b20746120 x16:
74657320323d6574 x15:
617473203b474e49
x14:
00058b5b8b9aa1f1 x13:
ffffffc00903cda0 x12:
00000000d744fcc9
x11:
000000000000001c x10:
00000000000009a0 x9 :
ffffffc0090201f4
x8 :
ffffff8828245000 x7 :
0000000000000001 x6 :
0000000000000001
x5 :
00000000410fd080 x4 :
0000000000000002 x3 :
ffffff8815aab4c8
x2 :
0000000000000000 x1 :
0000000000000000 x0 :
ffffff8828244600
Call trace:
__might_sleep+0x80/0xa4
mutex_lock+0x2c/0x80
sync_session_response+0x110/0x310
vpu_session_send_cmd+0x18c/0x244
vpu_session_start+0x38/0x70
vdec_start_session+0x1b4/0x3e0
vpu_vb2_start_streaming+0xa0/0x1c4
vb2_start_streaming+0x74/0x160
vb2_core_qbuf+0x488/0x650
vb2_qbuf+0x9c/0x100
v4l2_m2m_qbuf+0x7c/0x224
v4l2_m2m_ioctl_qbuf+0x20/0x2c
v4l_qbuf+0x50/0x6c
__video_do_ioctl+0x174/0x3f0
video_usercopy+0x210/0x7cc
video_ioctl2+0x20/0x30
v4l2_ioctl+0x48/0x6c
we need to refine check_is_responsed() to remove the mutext_lock, each
cmd has a monotonically increasing id, and cmds are executed
sequentially, so we can check the id of the last reponsed cmd, then
determine whether a command has been responded or not.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
CC: Xiaolei Wang <xiaolei.wang@windriver.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniel Vacek [Tue, 12 Dec 2023 08:07:45 +0000 (09:07 +0100)]
IB/ipoib: Fix mcast list locking
[ Upstream commit
4f973e211b3b1c6d36f7c6a19239d258856749f9 ]
Releasing the `priv->lock` while iterating the `priv->multicast_list` in
`ipoib_mcast_join_task()` opens a window for `ipoib_mcast_dev_flush()` to
remove the items while in the middle of iteration. If the mcast is removed
while the lock was dropped, the for loop spins forever resulting in a hard
lockup (as was reported on RHEL 4.18.0-372.75.1.el8_6 kernel):
Task A (kworker/u72:2 below) | Task B (kworker/u72:0 below)
-----------------------------------+-----------------------------------
ipoib_mcast_join_task(work) | ipoib_ib_dev_flush_light(work)
spin_lock_irq(&priv->lock) | __ipoib_ib_dev_flush(priv, ...)
list_for_each_entry(mcast, | ipoib_mcast_dev_flush(dev = priv->dev)
&priv->multicast_list, list) |
ipoib_mcast_join(dev, mcast) |
spin_unlock_irq(&priv->lock) |
| spin_lock_irqsave(&priv->lock, flags)
| list_for_each_entry_safe(mcast, tmcast,
| &priv->multicast_list, list)
| list_del(&mcast->list);
| list_add_tail(&mcast->list, &remove_list)
| spin_unlock_irqrestore(&priv->lock, flags)
spin_lock_irq(&priv->lock) |
| ipoib_mcast_remove_list(&remove_list)
(Here, `mcast` is no longer on the | list_for_each_entry_safe(mcast, tmcast,
`priv->multicast_list` and we keep | remove_list, list)
spinning on the `remove_list` of | >>> wait_for_completion(&mcast->done)
the other thread which is blocked |
and the list is still valid on |
it's stack.)
Fix this by keeping the lock held and changing to GFP_ATOMIC to prevent
eventual sleeps.
Unfortunately we could not reproduce the lockup and confirm this fix but
based on the code review I think this fix should address such lockups.
crash> bc 31
PID: 747 TASK:
ff1c6a1a007e8000 CPU: 31 COMMAND: "kworker/u72:2"
--
[exception RIP: ipoib_mcast_join_task+0x1b1]
RIP:
ffffffffc0944ac1 RSP:
ff646f199a8c7e00 RFLAGS:
00000002
RAX:
0000000000000000 RBX:
ff1c6a1a04dc82f8 RCX:
0000000000000000
work (&priv->mcast_task{,.work})
RDX:
ff1c6a192d60ac68 RSI:
0000000000000286 RDI:
ff1c6a1a04dc8000
&mcast->list
RBP:
ff646f199a8c7e90 R8:
ff1c699980019420 R9:
ff1c6a1920c9a000
R10:
ff646f199a8c7e00 R11:
ff1c6a191a7d9800 R12:
ff1c6a192d60ac00
mcast
R13:
ff1c6a1d82200000 R14:
ff1c6a1a04dc8000 R15:
ff1c6a1a04dc82d8
dev priv (&priv->lock) &priv->multicast_list (aka head)
ORIG_RAX:
ffffffffffffffff CS: 0010 SS: 0018
Signed-off-by: Sasha Levin <sashal@kernel.org>
Douglas Anderson [Thu, 21 Sep 2023 19:26:52 +0000 (12:26 -0700)]
drm/exynos: Call drm_atomic_helper_shutdown() at shutdown/unbind time
[ Upstream commit
16ac5b21b31b439f03cdf44c153c5f5af94fb3eb ]
Based on grepping through the source code this driver appears to be
missing a call to drm_atomic_helper_shutdown() at system shutdown time
and at driver unbind time. Among other things, this means that if a
panel is in use that it won't be cleanly powered off at system
shutdown time.
The fact that we should call drm_atomic_helper_shutdown() in the case
of OS shutdown/restart and at driver remove (or unbind) time comes
straight out of the kernel doc "driver instance overview" in
drm_drv.c.
A few notes about this fix:
- When adding drm_atomic_helper_shutdown() to the unbind path, I added
it after drm_kms_helper_poll_fini() since that's when other drivers
seemed to have it.
- Technically with a previous patch, ("drm/atomic-helper:
drm_atomic_helper_shutdown(NULL) should be a noop"), we don't
actually need to check to see if our "drm" pointer is NULL before
calling drm_atomic_helper_shutdown(). We'll leave the "if" test in,
though, so that this patch can land without any dependencies. It
could potentially be removed later.
- This patch also makes sure to set the drvdata to NULL in the case of
bind errors to make sure that shutdown can't access freed data.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chao Yu [Sun, 10 Dec 2023 11:35:42 +0000 (19:35 +0800)]
f2fs: fix to tag gcing flag on page during block migration
[ Upstream commit
4961acdd65c956e97c1a000c82d91a8c1cdbe44b ]
It needs to add missing gcing flag on page during block migration,
in order to garantee migrated data be persisted during checkpoint,
otherwise out-of-order persistency between data and node may cause
data corruption after SPOR.
Similar issue was fixed by commit
2d1fe8a86bf5 ("f2fs: fix to tag
gcing flag on page during file defragment").
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
James Seo [Thu, 23 Nov 2023 05:49:19 +0000 (21:49 -0800)]
hwmon: (hp-wmi-sensors) Fix failure to load on EliteDesk 800 G6
[ Upstream commit
c9ba592580947b81f33f514320aeef02ddc001fd ]
The EliteDesk 800 G6 stores a raw WMI string within the ACPI object in its
BIOS corresponding to one instance of HPBIOS_PlatformEvents.Name. This is
evidently a valid way of representing a WMI data item as far as the
Microsoft ACPI-WMI mapper is concerned, but is preventing the driver from
loading.
This seems quite rare, but add support for such strings. Treating this as a
quirk pretty much means adding that support anyway.
Also clean up an oversight in update_numeric_sensor_from_wobj() in which
the result of hp_wmi_strdup() was being used without error checking.
Reported-by: Lukasz Stelmach <l.stelmach@samsung.com>
Closes: https://lore.kernel.org/linux-hwmon/
7850a0bd-60e7-88f8-1d6c-
0bb0e3234fdc@roeck-us.net/
Tested-by: Lukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: James Seo <james@equiv.tech>
Link: https://lore.kernel.org/r/20231123054918.157098-1-james@equiv.tech
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xing Tong Wu [Tue, 21 Nov 2023 08:16:04 +0000 (16:16 +0800)]
hwmon: (nct6775) Fix fan speed set failure in automatic mode
[ Upstream commit
8b3800256abad20e91c2698607f9b28591407b19 ]
Setting the fan speed is only valid in manual mode; it is not possible
to set the fan's speed in automatic mode.
Return error when attempting to set the fan speed in automatic mode.
Signed-off-by: Xing Tong Wu <xingtong.wu@siemens.com>
Link: https://lore.kernel.org/r/20231121081604.2499-3-xingtong_wu@163.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Laurent Pinchart [Sun, 26 Nov 2023 02:09:48 +0000 (03:09 +0100)]
media: rkisp1: resizer: Stop manual allocation of v4l2_subdev_state
[ Upstream commit
efa28efd9cba015f8c3d88123527c3c3cfcd13d0 ]
Supported media bus codes on the resizer sink pad are identical to the
ISP source pad. The .enum_mbus_code() handler thus delegates the
enumeration to the ISP's operation. This is problematic for two
reasons:
- Format enumeration on the ISP source pad is dependent on the format
configured on the ISP sink pad for the same subdev state (TRY or
ACTIVE), while format enumeration on the resizer sink pad should
return all formats supported by the resizer subdev, regardless of the
ISP configuration.
- Delegating the operation involves creating a fake v4l2_subdev_state on
the stack to pass to the ISP .enum_mbus_code() handler. This gets in
the way of evolution of both the ISP enumeration handler and, more
generally, the V4L2 subdev state infrastructure.
Fix those two issues by implementing format enumeration manually for the
resizer.
Link: https://lore.kernel.org/r/20231126020948.2700-1-laurent.pinchart@ideasonboard.com
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tomi Valkeinen [Thu, 7 Dec 2023 07:57:48 +0000 (08:57 +0100)]
media: rkisp1: Fix IRQ disable race issue
[ Upstream commit
870565f063a58576e8a4529f122cac4325c6b395 ]
In rkisp1_isp_stop() and rkisp1_csi_disable() the driver masks the
interrupts and then apparently assumes that the interrupt handler won't
be running, and proceeds in the stop procedure. This is not the case, as
the interrupt handler can already be running, which would lead to the
ISP being disabled while the interrupt handler handling a captured
frame.
This brings up two issues: 1) the ISP could be powered off while the
interrupt handler is still running and accessing registers, leading to
board lockup, and 2) the interrupt handler code and the code that
disables the streaming might do things that conflict.
It is not clear to me if 2) causes a real issue, but 1) can be seen with
a suitable delay (or printk in my case) in the interrupt handler,
leading to board lockup.
Link: https://lore.kernel.org/r/20231207-rkisp-irq-fix-v3-4-358a2c871a3c@ideasonboard.com
Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tomi Valkeinen [Thu, 7 Dec 2023 07:57:47 +0000 (08:57 +0100)]
media: rkisp1: Store IRQ lines
[ Upstream commit
0753874617de883c6d4da903142f334f76a75d70 ]
Store the IRQ lines used by the driver for easy access. These are needed
in future patches which fix IRQ race issues.
Link: https://lore.kernel.org/r/20231207-rkisp-irq-fix-v3-3-358a2c871a3c@ideasonboard.com
Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tomi Valkeinen [Thu, 7 Dec 2023 07:57:46 +0000 (08:57 +0100)]
media: rkisp1: Fix IRQ handler return values
[ Upstream commit
3eb7910e1b16a2c136be26a8380f21469225b2f6 ]
The IRQ handler rkisp1_isr() calls sub-handlers, all of which returns an
irqreturn_t value, but rkisp1_isr() ignores those values and always
returns IRQ_HANDLED.
Fix this by collecting the return values, and returning IRQ_HANDLED or
IRQ_NONE as appropriate.
Link: https://lore.kernel.org/r/20231207-rkisp-irq-fix-v3-2-358a2c871a3c@ideasonboard.com
Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tomi Valkeinen [Thu, 7 Dec 2023 07:57:45 +0000 (08:57 +0100)]
media: rkisp1: Drop IRQF_SHARED
[ Upstream commit
85d2a31fe4d9be1555f621ead7a520d8791e0f74 ]
In all known platforms the ISP has dedicated IRQ lines, but for some
reason the driver uses IRQF_SHARED.
Supporting IRQF_SHARED properly requires handling interrupts even when
our device is disabled, and the driver does not handle this. To avoid
adding such code, and to be sure the driver won't accidentally be used
in a platform with shared interrupts, let's drop the IRQF_SHARED flag.
Link: https://lore.kernel.org/r/20231207-rkisp-irq-fix-v3-1-358a2c871a3c@ideasonboard.com
Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ricardo Ribalda [Sat, 28 Oct 2023 07:55:04 +0000 (09:55 +0200)]
media: uvcvideo: Fix power line control for SunplusIT camera
[ Upstream commit
6180056b0e0c097dad5d1569dcd661eaf509ea43 ]
The device does not implement the power line frequency control
correctly. It is a UVC 1.5 device, but implements the control as a UVC
1.1 device.
Add the corresponding control mapping override.
Bus 003 Device 002: ID 2b7e:b752 SunplusIT Inc HD Camera
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.01
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x2b7e
idProduct 0xb752
bcdDevice 0.04
iManufacturer 1 SunplusIT Inc
iProduct 2 HD Camera
iSerial 3 01.00.00
bNumConfigurations 1
Cc: Yunke Cao <yunkec@chromium.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ricardo Ribalda [Tue, 5 Sep 2023 15:29:52 +0000 (17:29 +0200)]
media: uvcvideo: Fix power line control for a Chicony camera
[ Upstream commit
dba3e701917a4cce92920f8ccb9fa4d4ee5ac07e ]
The device does not implement the control properly.
Fixes v4l2-compliance error:
info: checking control 'Power Line Frequency' (0x00980918)
fail: v4l2-test-controls.cpp(552): could not set valid menu item 3
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Neil Armstrong [Thu, 7 Dec 2023 16:37:18 +0000 (17:37 +0100)]
drm/msm/dp: Add DisplayPort controller for SM8650
[ Upstream commit
1b2d98bdd7b7c64265732f5f0dace4c52c9ba8a8 ]
The Qualcomm SM8650 platform comes with a DisplayPort controller
with a different base offset than the previous SM8550 SoC,
add support for this in the DisplayPort driver.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/571132/
Link: https://lore.kernel.org/r/20231207-topic-sm8650-upstream-dp-v1-2-b762c06965bb@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pierre-Louis Bossart [Mon, 4 Dec 2023 21:27:08 +0000 (15:27 -0600)]
ALSA: hda: intel-dspcfg: add filters for ARL-S and ARL
[ Upstream commit
7a9d6bbe8a663c817080be55d9fecf19a4a8fd8f ]
Same usual filters, SOF is required for DMIC and/or SoundWire support.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231204212710.185976-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pierre-Louis Bossart [Mon, 4 Dec 2023 21:27:07 +0000 (15:27 -0600)]
ALSA: hda: Intel: add HDA_ARL PCI ID support
[ Upstream commit
a31014ebad617868c246d3985ff80d891f03711e ]
Yet another PCI ID.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231204212710.185976-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pierre-Louis Bossart [Mon, 4 Dec 2023 21:27:06 +0000 (15:27 -0600)]
PCI: add INTEL_HDA_ARL to pci_ids.h
[ Upstream commit
5ec42bf04d72fd6d0a6855810cc779e0ee31dfd7 ]
The PCI ID insertion follows the increasing order in the table, but
this hardware follows MTL (MeteorLake).
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231204212710.185976-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Tretter [Fri, 13 Oct 2023 11:00:22 +0000 (13:00 +0200)]
media: rockchip: rga: fix swizzling for RGB formats
[ Upstream commit
9e7dc39260edac180c206bb6149595a40eabae3e ]
When using 32 bit RGB formats, the RGA on the rk3568 produces wrong
colors as the wrong color channels are read or written. The reason is
that the format description for the channel swizzeling is wrong and the
wrong bits are configured. For example, when converting ARGB32 to NV12,
the alpha channel is used as blue channel.. This doesn't happen if the
color format is the same on both sides.
Fix the color_swap settings of the formats to correctly handle 32 bit
RGB formats.
For RGA_COLOR_FMT_XBGR8888, the RGA_COLOR_ALPHA_SWAP bit doesn't have an
effect. Thus, it isn't possible to handle the V4L2_PIX_FMT_XRGB32. Thus,
it is removed from the list of supported formats.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ghanshyam Agrawal [Sat, 25 Nov 2023 09:02:36 +0000 (14:32 +0530)]
media: stk1160: Fixed high volume of stk1160_dbg messages
[ Upstream commit
b3695e86d25aafbe175dd51f6aaf6f68d341d590 ]
The function stk1160_dbg gets called too many times, which causes
the output to get flooded with messages. Since stk1160_dbg uses
printk, it is now replaced with printk_ratelimited.
Suggested-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Ghanshyam Agrawal <ghanshyam1898@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tomi Valkeinen [Thu, 21 Sep 2023 10:50:32 +0000 (13:50 +0300)]
drm/mipi-dsi: Fix detach call without attach
[ Upstream commit
90d50b8d85834e73536fdccd5aa913b30494fef0 ]
It's been reported that DSI host driver's detach can be called without
the attach ever happening:
https://lore.kernel.org/all/
20230412073954.20601-1-tony@atomide.com/
After reading the code, I think this is what happens:
We have a DSI host defined in the device tree and a DSI peripheral under
that host (i.e. an i2c device using the DSI as data bus doesn't exhibit
this behavior).
The host driver calls mipi_dsi_host_register(), which causes (via a few
functions) mipi_dsi_device_add() to be called for the DSI peripheral. So
now we have a DSI device under the host, but attach hasn't been called.
Normally the probing of the devices continues, and eventually the DSI
peripheral's driver will call mipi_dsi_attach(), attaching the
peripheral.
However, if the host driver's probe encounters an error after calling
mipi_dsi_host_register(), and before the peripheral has called
mipi_dsi_attach(), the host driver will do cleanups and return an error
from its probe function. The cleanups include calling
mipi_dsi_host_unregister().
mipi_dsi_host_unregister() will call two functions for all its DSI
peripheral devices: mipi_dsi_detach() and mipi_dsi_device_unregister().
The latter makes sense, as the device exists, but the former may be
wrong as attach has not necessarily been done.
To fix this, track the attached state of the peripheral, and only detach
from mipi_dsi_host_unregister() if the peripheral was attached.
Note that I have only tested this with a board with an i2c DSI
peripheral, not with a "pure" DSI peripheral.
However, slightly related, the unregister machinery still seems broken.
E.g. if the DSI host driver is unbound, it'll detach and unregister the
DSI peripherals. After that, when the DSI peripheral driver unbound
it'll call detach either directly or using the devm variant, leading to
a crash. And probably the driver will crash if it happens, for some
reason, to try to send a message via the DSI bus.
But that's another topic.
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921-dsi-detach-fix-v1-1-d0de2d1621d9@ideasonboard.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tomi Valkeinen [Fri, 3 Nov 2023 13:14:04 +0000 (15:14 +0200)]
drm/framebuffer: Fix use of uninitialized variable
[ Upstream commit
f9af8f0c1dc567a5a6a6318ff324c45d80d4a60f ]
smatch reports:
drivers/gpu/drm/drm_framebuffer.c:654 drm_mode_getfb2_ioctl() error: uninitialized symbol 'ret'.
'ret' is possibly not set when there are no errors, causing the error
above. I can't say if that ever happens in real-life, but in any case I
think it is good to initialize 'ret' to 0.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231103-uninit-fixes-v2-2-c22b2444f5f5@ideasonboard.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tomi Valkeinen [Fri, 3 Nov 2023 13:14:03 +0000 (15:14 +0200)]
drm/drm_file: fix use of uninitialized variable
[ Upstream commit
1d3062fad9c7313fff9970a88e0538a24480ffb8 ]
smatch reports:
drivers/gpu/drm/drm_file.c:967 drm_show_memory_stats() error: uninitialized symbol 'supported_status'.
'supported_status' is only set in one code path. I'm not familiar with
the code to say if that path will always be ran in real life, but
whether that is the case or not, I think it is good to initialize
'supported_status' to 0 to silence the warning (and possibly fix a bug).
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231103-uninit-fixes-v2-1-c22b2444f5f5@ideasonboard.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ilya Bakoulin [Fri, 1 Dec 2023 13:25:06 +0000 (06:25 -0700)]
drm/amd/display: Fix MST PBN/X.Y value calculations
[ Upstream commit
94bbf802efd0a8f13147d6664af6e653637340a8 ]
Changing PBN calculation to be more in line with spec. We don't need to
inflate PBN_NATIVE value by the 1.006 margin, since that is already
taken care of in the get_pbn_per_slot function.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Venkata Prasad Potturu [Wed, 6 Dec 2023 11:06:12 +0000 (16:36 +0530)]
ASoC: amd: Add new dmi entries for acp5x platform
[ Upstream commit
c3ab23a10771bbe06300e5374efa809789c65455 ]
Add sys_vendor and product_name dmi entries for acp5x platform.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://lore.kernel.org/r/20231206110620.1695591-1-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jaegeuk Kim [Sat, 2 Dec 2023 08:08:57 +0000 (00:08 -0800)]
f2fs: fix write pointers on zoned device after roll forward
[ Upstream commit
9dad4d964291295ef48243d4e03972b85138bc9f ]
1. do roll forward recovery
2. update current segments pointers
3. fix the entire zones' write pointers
4. do checkpoint
Reviewed-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Meenakshikumar Somasundaram [Thu, 9 Nov 2023 05:04:36 +0000 (00:04 -0500)]
drm/amd/display: Fix tiled display misalignment
[ Upstream commit
c4b8394e76adba4f50a3c2696c75b214a291e24a ]
[Why]
When otg workaround is applied during clock update, otgs of
tiled display went out of sync.
[How]
To call dc_trigger_sync() after clock update to sync otgs again.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xin Ji [Mon, 20 Nov 2023 09:10:37 +0000 (17:10 +0800)]
drm/bridge: anx7625: Fix Set HPD irq detect window to 2ms
[ Upstream commit
e3af7053de3f685c96158373bc234b2feca1f160 ]
Polling firmware HPD GPIO status, set HPD irq detect window to 2ms
after firmware HPD GPIO initial done
Signed-off-by: Xin Ji <xji@analogixsemi.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231120091038.284825-2-xji@analogixsemi.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / platform / kernel / linux-rpi.git / log