serial: pch: Fix PCI device refcount leak in pch_request_dma()

[ Upstream commit 8be3a7bf773700534a6e8f87f6ed2ed111254be5 ]

As comment of pci_get_slot() says, it returns a pci_device with its
refcount increased. The caller must decrement the reference count by
calling pci_dev_put().

Since 'dma_dev' is only used to filter the channel in filter(), we can
call pci_dev_put() before exiting from pch_request_dma(). Add the
missing pci_dev_put() for the normal and error path.

Fixes: 3c6a483275f4 ("Serial: EG20T: add PCH_UART driver")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/20221122114559.27692-1-wangxiongfeng2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: stm32: move dma_request_chan() before clk_prepare_enable()

[ Upstream commit 0d114e9ff940ebad8e88267013bf96c605a6b336 ]

If dma_request_chan() returns a PROBE_DEFER error, clk_disable_unprepare()
will be called and USART clock will be disabled. But early console can be
still active on the same USART.

While moving dma_request_chan() before clk_prepare_enable(), the clock
won't be taken in case of a DMA PROBE_DEFER error, and so it doesn't need
to be disabled. Then USART is still clocked for early console.

Fixes: a7770a4bfcf4 ("serial: stm32: defer probe for dma devices")
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20221118170602.1057863-1-valentin.caron@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: pl011: Do not clear RX FIFO & RX interrupt in unthrottle.

[ Upstream commit 032d5a71ed378ffc6a2d41a187d8488a4f9fe415 ]

Clearing the RX FIFO will cause data loss.
Copy the pl011_enabl_interrupts implementation, and remove the clear
interrupt and FIFO part of the code.

Fixes: 211565b10099 ("serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle")
Signed-off-by: delisun <delisun@pateo.com.cn>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20221110020108.7700-1-delisun@pateo.com.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: amba-pl011: avoid SBSA UART accessing DMACR register

[ Upstream commit 94cdb9f33698478b0e7062586633c42c6158a786 ]

Chapter "B Generic UART" in "ARM Server Base System Architecture" [1]
documentation describes a generic UART interface. Such generic UART
does not support DMA. In current code, sbsa_uart_pops and
amba_pl011_pops share the same stop_rx operation, which will invoke
pl011_dma_rx_stop, leading to an access of the DMACR register. This
commit adds a using_rx_dma check in pl011_dma_rx_stop to avoid the
access to DMACR register for SBSA UARTs which does not support DMA.

When the kernel enables DMA engine with "CONFIG_DMA_ENGINE=y", Linux
SBSA PL011 driver will access PL011 DMACR register in some functions.
For most real SBSA Pl011 hardware implementations, the DMACR write
behaviour will be ignored. So these DMACR operations will not cause
obvious problems. But for some virtual SBSA PL011 hardware, like Xen
virtual SBSA PL011 (vpl011) device, the behaviour might be different.
Xen vpl011 emulation will inject a data abort to guest, when guest is
accessing an unimplemented UART register. As Xen VPL011 is SBSA
compatible, it will not implement DMACR register. So when Linux SBSA
PL011 driver access DMACR register, it will get an unhandled data abort
fault and the application will get a segmentation fault:
Unhandled fault at 0xffffffc00944d048
Mem abort info:
  ESR = 0x96000000
  EC = 0x25: DABT (current EL), IL = 32 bits
  SET = 0, FnV = 0
  EA = 0, S1PTW = 0
  FSC = 0x00: ttbr address size fault
Data abort info:
  ISV = 0, ISS = 0x00000000
  CM = 0, WnR = 0
swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000020e2e000
[ffffffc00944d048] pgd=100000003ffff803, p4d=100000003ffff803, pud=100000003ffff803, pmd=100000003fffa803, pte=006800009c090f13
Internal error: ttbr address size fault: 96000000 [#1] PREEMPT SMP
...
Call trace:
 pl011_stop_rx+0x70/0x80
 tty_port_shutdown+0x7c/0xb4
 tty_port_close+0x60/0xcc
 uart_close+0x34/0x8c
 tty_release+0x144/0x4c0
 __fput+0x78/0x220
 ____fput+0x1c/0x30
 task_work_run+0x88/0xc0
 do_notify_resume+0x8d0/0x123c
 el0_svc+0xa8/0xc0
 el0t_64_sync_handler+0xa4/0x130
 el0t_64_sync+0x1a0/0x1a4
Code: b9000083 b901f001 794038a0 8b000042 (b9000041)
---[ end trace 83dd93df15c3216f ]---
note: bootlogd[132] exited with preempt_count 1
/etc/rcS.d/S07bootlogd: line 47: 132 Segmentation fault start-stop-daemon

This has been discussed in the Xen community, and we think it should fix
this in Linux. See [2] for more information.

[1] https://developer.arm.com/documentation/den0094/c/?lang=en
[2] https://lists.xenproject.org/archives/html/xen-devel/2022-11/msg00543.html

Fixes: 0dd1e247fd39 (drivers: PL011: add support for the ARM SBSA generic UART)
Signed-off-by: Jiamei Xie <jiamei.xie@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20221117103237.86856-1-jiamei.xie@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

extcon: usbc-tusb320: Update state on probe even if no IRQ pending

[ Upstream commit 581c848b610dbf3fe1ed4d85fd53d0743c61faba ]

Currently this driver triggers extcon and typec state update in its
probe function, to read out current state reported by the chip and
report the correct state to upper layers. This synchronization is
performed correctly, but only in case the chip indicates a pending
interrupt in reg09 register.

This fails to cover the situation where all interrupts reported by
the chip were already handled by Linux before reboot, then the system
rebooted, and then Linux starts again. In this case, the TUSB320 no
longer reports any interrupts in reg09, and the state update does not
perform any update as it depends on that interrupt indication.

Fix this by turning tusb320_irq_handler() into a thin wrapper around
tusb320_state_update_handler(), where the later now contains the bulk
of the code of tusb320_irq_handler(), but adds new function parameter
"force_update". The "force_update" parameter can be used by the probe
function to assure that the state synchronization is always performed,
independent of the interrupt indicated in reg09. The interrupt handler
tusb320_irq_handler() callback uses force_update=false to avoid state
updates on potential spurious interrupts and retain current behavior.

Fixes: 06bc4ca115cdd ("extcon: Add driver for TI TUSB320")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20221120141509.81012-1-marex@denx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

extcon: usbc-tusb320: Add USB TYPE-C support

[ Upstream commit bf7571c00dca0a9c5af3f5125ef5a89a40b13cd5 ]

The TI TUSB320 seems like a better fit for USB TYPE-C subsystem,
which can expose details collected by the TUSB320 in a far more
precise way than extcon. Since there are existing users in the
kernel and in DT which depend on the extcon interface, keep it
for now.

Add TYPE-C interface and expose the supported supply current,
direction and connector polarity via the TYPE-C interface.

Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Stable-dep-of: 581c848b610d ("extcon: usbc-tusb320: Update state on probe even if no IRQ pending")
Signed-off-by: Sasha Levin <sashal@kernel.org>

extcon: usbc-tusb320: Factor out extcon into dedicated functions

[ Upstream commit 9483811a126a319ecac749f1b767ea5faecc7aed ]

Move extcon code into separate functions in preparation for addition of
USB TYPE-C support. No functional change.

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Stable-dep-of: 581c848b610d ("extcon: usbc-tusb320: Update state on probe even if no IRQ pending")
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: typec: Factor out non-PD fwnode properties

[ Upstream commit 2e7dfb0e9cacad0f1adbc4b97f0b96ba35027f24 ]

Basic programmable non-PD Type-C port controllers do not need the full
TCPM library, but they share the same devicetree binding and the same
typec_capability structure. Factor out a helper for parsing those
properties which map to fields in struct typec_capability, so the code
can be shared between TCPM and basic non-TCPM drivers.

Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220214050118.61015-4-samuel@sholland.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 581c848b610d ("extcon: usbc-tusb320: Update state on probe even if no IRQ pending")
Signed-off-by: Sasha Levin <sashal@kernel.org>

extcon: usbc-tusb320: Add support for TUSB320L

[ Upstream commit ce0320bd3872038569be360870e2d5251b975692 ]

TUSB320L is a newer chip with additional features, and it has additional steps
in its mode changing sequence:
 - Disable CC state machine,
 - Write to mode register,
 - Wait for 5 ms,
 - Re-enable CC state machine.
It also has an additional register that a revision number can be read from.

Add support for the mode changing sequence, and read the revision number during
probe and print it as info.

Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Stable-dep-of: 581c848b610d ("extcon: usbc-tusb320: Update state on probe even if no IRQ pending")
Signed-off-by: Sasha Levin <sashal@kernel.org>

extcon: usbc-tusb320: Add support for mode setting and reset

[ Upstream commit 70c55d6be634e5f9894169340f3fe5c73f53ac2d ]

Reset the chip and set its mode to default (maintain mode set by PORT pin)
during probe to make sure it comes up in the default state.

Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Stable-dep-of: 581c848b610d ("extcon: usbc-tusb320: Update state on probe even if no IRQ pending")
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: typec: tipd: Fix spurious fwnode_handle_put in error path

[ Upstream commit 782c70edc4852a5d39be12377a85501546236212 ]

The err_role_put error path always calls fwnode_handle_put to release
the fwnode. This path can be reached after probe itself has already
released that fwnode though. Fix that by moving fwnode_handle_put in the
happy path to the very end.

Fixes: 18a6c866bb19 ("usb: typec: tps6598x: Add USB role switching logic")
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20221114174449.34634-2-sven@svenpeter.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: typec: tipd: Cleanup resources if devm_tps6598_psy_register fails

[ Upstream commit 19c220e9ab00f50edefb9667e3101e84a5112df2 ]

We can't just return if devm_tps6598_psy_register fails since previous
resources are not devres managed and have yet to be cleaned up.

Fixes: 10eb0b6ac63a ("usb: typec: tps6598x: Export some power supply properties")
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20221114174449.34634-1-sven@svenpeter.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: typec: tcpci: fix of node refcount leak in tcpci_register_port()

[ Upstream commit 0384e87e3fec735e47f1c133c796f32ef7a72a9b ]

I got the following report while doing device(mt6370-tcpc) load
test with CONFIG_OF_UNITTEST and CONFIG_OF_DYNAMIC enabled:

  OF: ERROR: memory leak, expected refcount 1 instead of 2,
  of_node_get()/of_node_put() unbalanced - destroy cset entry:
  attach overlay node /i2c/pmic@34/tcpc/connector

The 'fwnode' set in tcpci_parse_config() which is called
in tcpci_register_port(), its node refcount is increased
in device_get_named_child_node(). It needs be put while
exiting, so call fwnode_handle_put() in the error path of
tcpci_register_port() and in tcpci_unregister_port() to
avoid leak.

Fixes: 5e85a04c8c0d ("usb: typec: add fwnode to tcpc")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20221121062416.1026192-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: typec: Check for ops->exit instead of ops->enter in altmode_exit

[ Upstream commit b6ddd180e3d9f92c1e482b3cdeec7dda086b1341 ]

typec_altmode_exit checks if ops->enter is not NULL but then calls
ops->exit a few lines below. Fix that and check for the function
pointer it's about to call instead.

Fixes: 8a37d87d72f0 ("usb: typec: Bus type for alternate modes")
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20221114165924.33487-1-sven@svenpeter.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: vme_user: Fix possible UAF in tsi148_dma_list_add

[ Upstream commit 357057ee55d3c99a5de5abe8150f7bca04f8e53b ]

Smatch report warning as follows:

drivers/staging/vme_user/vme_tsi148.c:1757 tsi148_dma_list_add() warn:
  '&entry->list' not removed from list

In tsi148_dma_list_add(), the error path "goto err_dma" will not
remove entry->list from list->entries, but entry will be freed,
then list traversal may cause UAF.

Fix by removeing it from list->entries before free().

Fixes: b2383c90a9d6 ("vme: tsi148: fix first DMA item mapping")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20221117035914.2954454-1-cuigaosheng1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: fotg210-udc: Fix ages old endianness issues

[ Upstream commit 46ed6026ca2181c917c8334a82e3eaf40a6234dd ]

The code in the FOTG210 driver isn't entirely endianness-agnostic
as reported by the kernel robot sparse testing. This came to
the surface while moving the files around.

The driver is only used on little-endian systems, so this causes
no real-world regression, but it is nice to be strict and have
some compile coverage also on big endian machines, so fix it
up with the right LE accessors.

Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/linux-usb/202211110910.0dJ7nZCn-lkp@intel.com/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20221111090317.94228-1-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

uio: uio_dmem_genirq: Fix deadlock between irq config and handling

[ Upstream commit 118b918018175d9fcd8db667f905012e986cc2c9 ]

This fixes a concurrency issue addressed in commit 34cb27528398 ("UIO: Fix
concurrency issue"):

  "In a SMP case there was a race condition issue between
  Uio_pdrv_genirq_irqcontrol() running on one CPU and irq handler on
  another CPU. Fix it by spin_locking shared resources access inside irq
  handler."

The implementation of "uio_dmem_genirq" was based on "uio_pdrv_genirq" and
it is used in a similar manner to the "uio_pdrv_genirq" driver with respect
to interrupt configuration and handling. At the time "uio_dmem_genirq" was
merged, both had the same implementation of the 'uio_info' handlers
irqcontrol() and handler(), thus, both had the same concurrency issue
mentioned by the above commit. However, the above patch was only applied to
the "uio_pdrv_genirq" driver.

Split out from commit 34cb27528398 ("UIO: Fix concurrency issue").

Fixes: 0a0c3b5a24bd ("Add new uio device for dynamic memory allocation")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Link: https://lore.kernel.org/r/20220930224100.816175-3-rafaelmendsr@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

uio: uio_dmem_genirq: Fix missing unlock in irq configuration

[ Upstream commit 9de255c461d1b3f0242b3ad1450c3323a3e00b34 ]

Commit b74351287d4b ("uio: fix a sleep-in-atomic-context bug in
uio_dmem_genirq_irqcontrol()") started calling disable_irq() without
holding the spinlock because it can sleep. However, that fix introduced
another bug: if interrupt is already disabled and a new disable request
comes in, then the spinlock is not unlocked:

root@localhost:~# printf '\x00\x00\x00\x00' > /dev/uio0
root@localhost:~# printf '\x00\x00\x00\x00' > /dev/uio0
root@localhost:~# [   14.851538] BUG: scheduling while atomic: bash/223/0x00000002
[   14.851991] Modules linked in: uio_dmem_genirq uio myfpga(OE) bochs drm_vram_helper drm_ttm_helper ttm drm_kms_helper drm snd_pcm ppdev joydev psmouse snd_timer snd e1000fb_sys_fops syscopyarea parport sysfillrect soundcore sysimgblt input_leds pcspkr i2c_piix4 serio_raw floppy evbug qemu_fw_cfg mac_hid pata_acpi ip_tables x_tables autofs4 [last unloaded: parport_pc]
[   14.854206] CPU: 0 PID: 223 Comm: bash Tainted: G           OE      6.0.0-rc7 #21
[   14.854786] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
[   14.855664] Call Trace:
[   14.855861]  <TASK>
[   14.856025]  dump_stack_lvl+0x4d/0x67
[   14.856325]  dump_stack+0x14/0x1a
[   14.856583]  __schedule_bug.cold+0x4b/0x5c
[   14.856915]  __schedule+0xe81/0x13d0
[   14.857199]  ? idr_find+0x13/0x20
[   14.857456]  ? get_work_pool+0x2d/0x50
[   14.857756]  ? __flush_work+0x233/0x280
[   14.858068]  ? __schedule+0xa95/0x13d0
[   14.858307]  ? idr_find+0x13/0x20
[   14.858519]  ? get_work_pool+0x2d/0x50
[   14.858798]  schedule+0x6c/0x100
[   14.859009]  schedule_hrtimeout_range_clock+0xff/0x110
[   14.859335]  ? tty_write_room+0x1f/0x30
[   14.859598]  ? n_tty_poll+0x1ec/0x220
[   14.859830]  ? tty_ldisc_deref+0x1a/0x20
[   14.860090]  schedule_hrtimeout_range+0x17/0x20
[   14.860373]  do_select+0x596/0x840
[   14.860627]  ? __kernel_text_address+0x16/0x50
[   14.860954]  ? poll_freewait+0xb0/0xb0
[   14.861235]  ? poll_freewait+0xb0/0xb0
[   14.861517]  ? rpm_resume+0x49d/0x780
[   14.861798]  ? common_interrupt+0x59/0xa0
[   14.862127]  ? asm_common_interrupt+0x2b/0x40
[   14.862511]  ? __uart_start.isra.0+0x61/0x70
[   14.862902]  ? __check_object_size+0x61/0x280
[   14.863255]  core_sys_select+0x1c6/0x400
[   14.863575]  ? vfs_write+0x1c9/0x3d0
[   14.863853]  ? vfs_write+0x1c9/0x3d0
[   14.864121]  ? _copy_from_user+0x45/0x70
[   14.864526]  do_pselect.constprop.0+0xb3/0xf0
[   14.864893]  ? do_syscall_64+0x6d/0x90
[   14.865228]  ? do_syscall_64+0x6d/0x90
[   14.865556]  __x64_sys_pselect6+0x76/0xa0
[   14.865906]  do_syscall_64+0x60/0x90
[   14.866214]  ? syscall_exit_to_user_mode+0x2a/0x50
[   14.866640]  ? do_syscall_64+0x6d/0x90
[   14.866972]  ? do_syscall_64+0x6d/0x90
[   14.867286]  ? do_syscall_64+0x6d/0x90
[   14.867626]  entry_SYSCALL_64_after_hwframe+0x63/0xcd
[...] stripped
[   14.872959]  </TASK>

('myfpga' is a simple 'uio_dmem_genirq' driver I wrote to test this)

The implementation of "uio_dmem_genirq" was based on "uio_pdrv_genirq" and
it is used in a similar manner to the "uio_pdrv_genirq" driver with respect
to interrupt configuration and handling. At the time "uio_dmem_genirq" was
introduced, both had the same implementation of the 'uio_info' handlers
irqcontrol() and handler(). Then commit 34cb27528398 ("UIO: Fix concurrency
issue"), which was only applied to "uio_pdrv_genirq", ended up making them
a little different. That commit, among other things, changed disable_irq()
to disable_irq_nosync() in the implementation of irqcontrol(). The
motivation there was to avoid a deadlock between irqcontrol() and
handler(), since it added a spinlock in the irq handler, and disable_irq()
waits for the completion of the irq handler.

By changing disable_irq() to disable_irq_nosync() in irqcontrol(), we also
avoid the sleeping-while-atomic bug that commit b74351287d4b ("uio: fix a
sleep-in-atomic-context bug in uio_dmem_genirq_irqcontrol()") was trying to
fix. Thus, this fixes the missing unlock in irqcontrol() by importing the
implementation of irqcontrol() handler from the "uio_pdrv_genirq" driver.
In the end, it reverts commit b74351287d4b ("uio: fix a
sleep-in-atomic-context bug in uio_dmem_genirq_irqcontrol()") and change
disable_irq() to disable_irq_nosync().

It is worth noting that this still does not address the concurrency issue
fixed by commit 34cb27528398 ("UIO: Fix concurrency issue"). It will be
addressed separately in the next commits.

Split out from commit 34cb27528398 ("UIO: Fix concurrency issue").

Fixes: b74351287d4b ("uio: fix a sleep-in-atomic-context bug in uio_dmem_genirq_irqcontrol()")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Link: https://lore.kernel.org/r/20220930224100.816175-2-rafaelmendsr@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vfio: platform: Do not pass return buffer to ACPI _RST method

[ Upstream commit e67e070632a665c932d534b8b800477bb3111449 ]

The ACPI _RST method has no return value, there's no need to pass a return
buffer to acpi_evaluate_object().

Fixes: d30daa33ec1d ("vfio: platform: call _RST method when using ACPI")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20221018152825.891032-1-rafaelmendsr@gmail.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

class: fix possible memory leak in __class_register()

[ Upstream commit 8c3e8a6bdb5253b97ad532570f8b5db5f7a06407 ]

If class_add_groups() returns error, the 'cp->subsys' need be
unregister, and the 'cp' need be freed.

We can not call kset_unregister() here, because the 'cls' will
be freed in callback function class_release() and it's also
freed in caller's error path, it will cause double free.

So fix this by calling kobject_del() and kfree_const(name) to
cleanup kobject. Besides, call kfree() to free the 'cp'.

Fault injection test can trigger this:

unreferenced object 0xffff888102fa8190 (size 8):
  comm "modprobe", pid 502, jiffies 4294906074 (age 49.296s)
  hex dump (first 8 bytes):
    70 6b 74 63 64 76 64 00                          pktcdvd.
  backtrace:
    [<00000000e7c7703d>] __kmalloc_track_caller+0x1ae/0x320
    [<000000005e4d70bc>] kstrdup+0x3a/0x70
    [<00000000c2e5e85a>] kstrdup_const+0x68/0x80
    [<000000000049a8c7>] kvasprintf_const+0x10b/0x190
    [<0000000029123163>] kobject_set_name_vargs+0x56/0x150
    [<00000000747219c9>] kobject_set_name+0xab/0xe0
    [<0000000005f1ea4e>] __class_register+0x15c/0x49a

unreferenced object 0xffff888037274000 (size 1024):
  comm "modprobe", pid 502, jiffies 4294906074 (age 49.296s)
  hex dump (first 32 bytes):
    00 40 27 37 80 88 ff ff 00 40 27 37 80 88 ff ff  .@'7.....@'7....
    00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00  .....N..........
  backtrace:
    [<00000000151f9600>] kmem_cache_alloc_trace+0x17c/0x2f0
    [<00000000ecf3dd95>] __class_register+0x86/0x49a

Fixes: ced6473e7486 ("driver core: class: add class_groups support")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221026082803.3458760-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: 8250_bcm7271: Fix error handling in brcmuart_init()

[ Upstream commit 6a3ff858915fa8ca36c7eb02c87c9181ae2fc333 ]

A problem about 8250_bcm7271 create debugfs failed is triggered with the
following log given:

 [  324.516635] debugfs: Directory 'bcm7271-uart' with parent '/' already present!

The reason is that brcmuart_init() returns platform_driver_register()
directly without checking its return value, if platform_driver_register()
failed, it returns without destroy the newly created debugfs, resulting
the debugfs of 8250_bcm7271 can never be created later.

 brcmuart_init()
   debugfs_create_dir() # create debugfs directory
   platform_driver_register()
     driver_register()
       bus_add_driver()
         priv = kzalloc(...) # OOM happened
   # return without destroy debugfs directory

Fix by removing debugfs when platform_driver_register() returns error.

Fixes: 41a469482de2 ("serial: 8250: Add new 8250-core based Broadcom STB driver")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221109072110.117291-2-yuancan@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: tegra: Read DMA status before terminating

[ Upstream commit 109a951a9f1fd8a34ebd1896cbbd5d5cede880a7 ]

Read the DMA status before terminating the DMA, as doing so deletes
the DMA desc.

Also, to get the correct transfer status information, pause the DMA
using dmaengine_pause() before reading the DMA status.

Fixes: e9ea096dd225 ("serial: tegra: add serial driver")
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Kartik <kkartik@nvidia.com>
Link: https://lore.kernel.org/r/1666105086-17326-1-git-send-email-kkartik@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: dio: fix possible memory leak in dio_init()

[ Upstream commit e63e99397b2613d50a5f4f02ed07307e67a190f1 ]

If device_register() returns error, the 'dev' and name needs be
freed. Add a release function, and then call put_device() in the
error path, so the name is freed in kobject_cleanup() and to the
'dev' is freed in release function.

Fixes: 2e4c77bea3d8 ("m68k: dio - Kill warn_unused_result warnings")
Fixes: 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221109064036.1835346-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RISC-V: Align the shadow stack

[ Upstream commit b003b3b77d65133a0011ae3b7b255347438c12f6 ]

The standard RISC-V ABIs all require 16-byte stack alignment.  We're
only calling that one function on the shadow stack so I doubt it'd
result in a real issue, but might as well keep this lined up.

Fixes: 31da94c25aea ("riscv: add VMAP_STACK overflow detection")
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20221130023515.20217-1-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/IPoIB: Fix queue count inconsistency for PKEY child interfaces

[ Upstream commit dbc94a0fb81771a38733c0e8f2ea8c4fa6934dc1 ]

There are 2 ways to create IPoIB PKEY child interfaces:
1) Writing a PKEY to /sys/class/net/<ib parent interface>/create_child.
2) Using netlink with iproute.

While with sysfs the child interface has the same number of tx and
rx queues as the parent, with netlink there will always be 1 tx
and 1 rx queue for the child interface. That's because the
get_num_tx/rx_queues() netlink ops are missing and the default value
of 1 is taken for the number of queues (in rtnl_create_link()).

This change adds the get_num_tx/rx_queues() ops which allows for
interfaces with multiple queues to be created over netlink. This
constant only represents the max number of tx and rx queues on that
net device.

Fixes: 9baa0b036410 ("IB/ipoib: Add rtnl_link_ops support")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Link: https://lore.kernel.org/r/f4a42c8aa43c02d5ae5559a60c3e5e0f18c82531.1670485816.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwrng: geode - Fix PCI device refcount leak

[ Upstream commit 9f6ec8dc574efb7f4f3d7ee9cd59ae307e78f445 ]

for_each_pci_dev() is implemented by pci_get_device(). The comment of
pci_get_device() says that it will increase the reference count for the
returned pci_dev and also decrease the reference count for the input
pci_dev @from if it is not NULL.

If we break for_each_pci_dev() loop with pdev not NULL, we need to call
pci_dev_put() to decrease the reference count. We add a new struct
'amd_geode_priv' to record pointer of the pci_dev and membase, and then
add missing pci_dev_put() for the normal and error path.

Fixes: ef5d862734b8 ("[PATCH] Add Geode HW RNG driver")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwrng: amd - Fix PCI device refcount leak

[ Upstream commit ecadb5b0111ea19fc7c240bb25d424a94471eb7d ]

for_each_pci_dev() is implemented by pci_get_device(). The comment of
pci_get_device() says that it will increase the reference count for the
returned pci_dev and also decrease the reference count for the input
pci_dev @from if it is not NULL.

If we break for_each_pci_dev() loop with pdev not NULL, we need to call
pci_dev_put() to decrease the reference count. Add the missing
pci_dev_put() for the normal and error path.

Fixes: 96d63c0297cc ("[PATCH] Add AMD HW RNG driver")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: img-hash - Fix variable dereferenced before check 'hdev->req'

[ Upstream commit 04ba54e5af8f8f0137b08cb51a0b3a2e1ea46c94 ]

Smatch report warning as follows:

drivers/crypto/img-hash.c:366 img_hash_dma_task() warn: variable
dereferenced before check 'hdev->req'

Variable dereferenced should be done after check 'hdev->req',
fix it.

Fixes: d358f1abbf71 ("crypto: img-hash - Add Imagination Technologies hw hash accelerator")
Fixes: 10badea259fa ("crypto: img-hash - Fix null pointer exception")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Fix error code of CMD

[ Upstream commit 667d6164b84884c64de3fc18670cd5a98b0b10cf ]

The error code is fixed to EIO when CMD fails to excute. This patch
converts the error status reported by firmware to linux errno.

Fixes: a04ff739f2a9 ("RDMA/hns: Add command queue support for hip08 RoCE driver")
Link: https://lore.kernel.org/r/20221126102911.2921820-6-xuhaoyue1@hisilicon.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Fix page size cap from firmware

[ Upstream commit 99dc5a0712883d5d13b620d25b3759d429577bc8 ]

Add verification to make sure the roce page size cap is supported by the
system page size.

Fixes: ba6bb7e97421 ("RDMA/hns: Add interfaces to get pf capabilities from firmware")
Link: https://lore.kernel.org/r/20221126102911.2921820-5-xuhaoyue1@hisilicon.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Fix PBL page MTR find

[ Upstream commit 9fb39ef2ff3e18f1740625ba04093dfbef086d2b ]

Now, The address of the first two pages in the MR will be searched, which
use to speed up the lookup of the pbl table for hardware.  An exception
will occur when there is only one page in this MR.  This patch fix the
number of page to search.

Fixes: 9b2cf76c9f05 ("RDMA/hns: Optimize PBL buffer allocation process")
Link: https://lore.kernel.org/r/20221126102911.2921820-4-xuhaoyue1@hisilicon.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Fix AH attr queried by query_qp

[ Upstream commit bc34c04f7b97c3794dec5a6d6d27ffd5f0e4f5c8 ]

The queried AH attr is invalid. This patch fix it.

This problem is found by rdma-core test test_mr_rereg_pd

ERROR: test_mr_rereg_pd (tests.test_mr.MRTest)
Test that cover rereg MR's PD with this flow:
----------------------------------------------------------------------
Traceback (most recent call last):
  File "./tests/test_mr.py", line 157, in test_mr_rereg_pd
    self.restate_qps()
  File "./tests/test_mr.py", line 113, in restate_qps
    self.server.qp.to_rts(self.server_qp_attr)
  File "qp.pyx", line 1137, in pyverbs.qp.QP.to_rts
  File "qp.pyx", line 1123, in pyverbs.qp.QP.to_rtr
pyverbs.pyverbs_error.PyverbsRDMAError: Failed to modify QP state to RTR.
Errno: 22, Invalid argument

Fixes: 926a01dc000d ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/20221126102911.2921820-3-xuhaoyue1@hisilicon.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

orangefs: Fix sysfs not cleanup when dev init failed

[ Upstream commit ea60a4ad0cf88b411cde6888b8c890935686ecd7 ]

When the dev init failed, should cleanup the sysfs, otherwise, the
module will never be loaded since can not create duplicate sysfs
directory:

  sysfs: cannot create duplicate filename '/fs/orangefs'

  CPU: 1 PID: 6549 Comm: insmod Tainted: G        W          6.0.0+ #44
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
  Call Trace:
   <TASK>
   dump_stack_lvl+0x34/0x44
   sysfs_warn_dup.cold+0x17/0x24
   sysfs_create_dir_ns+0x16d/0x180
   kobject_add_internal+0x156/0x3a0
   kobject_init_and_add+0xcf/0x120
   orangefs_sysfs_init+0x7e/0x3a0 [orangefs]
   orangefs_init+0xfe/0x1000 [orangefs]
   do_one_initcall+0x87/0x2a0
   do_init_module+0xdf/0x320
   load_module+0x2f98/0x3330
   __do_sys_finit_module+0x113/0x1b0
   do_syscall_64+0x35/0x80
   entry_SYSCALL_64_after_hwframe+0x46/0xb0

  kobject_add_internal failed for orangefs with -EEXIST, don't try to register things with the same name in the same directory.

Fixes: 2f83ace37181 ("orangefs: put register_chrdev immediately before register_filesystem")
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: mt7621: Add sentinel to quirks table

[ Upstream commit 19098934f910b4d47cb30251dd39ffa57bef9523 ]

Current driver is missing a sentinel in the struct soc_device_attribute
array, which causes an oops when assessed by the
soc_device_match(mt7621_pcie_quirks_match) call.

This was only exposed once the CONFIG_SOC_MT7621 mt7621 soc_dev_attr
was fixed to register the SOC as a device, in:

commit 7c18b64bba3b ("mips: ralink: mt7621: do not use kzalloc too early")

Fix it by adding the required sentinel.

Link: https://lore.kernel.org/lkml/26ebbed1-0fe9-4af9-8466-65f841d0b382@app.fastmail.com
Link: https://lore.kernel.org/r/20221205204645.301301-1-git@johnthomson.fastmail.com.au
Fixes: b483b4e4d3f6 ("staging: mt7621-pci: add quirks for 'E2' revision using 'soc_device_attribute'")
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: mt7621: Rename mt7621_pci_ to mt7621_pcie_

[ Upstream commit 4793895f597d42eb54a0f54711b61263b6a8dd03 ]

Rename mt7621_pci_* structs and functions to mt7621_pcie_* for consistency
with the rest of the file.

Link: https://lore.kernel.org/r/20211223011054.1227810-18-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Stable-dep-of: 19098934f910 ("PCI: mt7621: Add sentinel to quirks table")
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/srp: Fix error return code in srp_parse_options()

[ Upstream commit ed461b30b22c8fa85c25189c14cb89f29595cd14 ]

In the previous iteration of the while loop, the "ret" may have been
assigned a value of 0, so the error return code -EINVAL may have been
incorrectly set to 0. To fix set valid return code before calling to
goto. Also investigate each case separately as Andy suggessted.

Fixes: e711f968c49c ("IB/srp: replace custom implementation of hex2bin()")
Fixes: 2a174df0c602 ("IB/srp: Use kstrtoull() instead of simple_strtoull()")
Fixes: 19f313438c77 ("IB/srp: Add RDMA/CM support")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Link: https://lore.kernel.org/r/1669953638-11747-2-git-send-email-wangyufen@huawei.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hfi1: Fix error return code in parse_platform_config()

[ Upstream commit 725349f8ba1e78a146c6ff8f3ee5e2712e517106 ]

In the previous iteration of the while loop, the "ret" may have been
assigned a value of 0, so the error return code -EINVAL may have been
incorrectly set to 0. To fix set valid return code before calling to
goto.

Fixes: 97167e813415 ("staging/rdma/hfi1: Tune for unknown channel if configuration file is absent")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Link: https://lore.kernel.org/r/1669953638-11747-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv/mm: add arch hook arch_clear_hugepage_flags

[ Upstream commit d8bf77a1dc3079692f54be3087a5fd16d90027b0 ]

With the PG_arch_1 we keep track if the page's data cache is clean,
architecture rely on this property to treat new pages as dirty with
respect to the data cache and perform the flushing before mapping the pages
into userspace.

This patch adds a new architecture hook, arch_clear_hugepage_flags,so that
architectures which rely on the page flags being in a particular state for
fresh allocations can adjust the flags accordingly when a page is freed
into the pool.

Fixes: 9e953cda5cdf ("riscv: Introduce huge page support for 32/64bit kernel")
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Link: https://lore.kernel.org/r/20221024094725.3054311-3-tongtiangen@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: omap-sham - Use pm_runtime_resume_and_get() in omap_sham_probe()

[ Upstream commit 7bcceb4c9896b1b672b636ae70fe75110d6bf1ad ]

omap_sham_probe() calls pm_runtime_get_sync() and calls
pm_runtime_put_sync() latter to put usage_counter. However,
pm_runtime_get_sync() will increment usage_counter even it failed. Fix
it by replacing it with pm_runtime_resume_and_get() to keep usage
counter balanced.

Fixes: b359f034c8bf ("crypto: omap-sham - Convert to use pm_runtime API")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: amlogic - Remove kcalloc without check

[ Upstream commit 3d780c8a9850ad60dee47a8d971ba7888f3d1bd3 ]

There is no real point in allocating dedicated memory for the irqs array.
MAXFLOW is only 2, so it is easier to allocated the needed space
directly within the 'meson_dev' structure.

This saves some memory allocation and avoids an indirection when using the
irqs array.

Fixes: 48fe583fe541 ("crypto: amlogic - Add crypto accelerator...")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/nldev: Fix failure to send large messages

[ Upstream commit fc8f93ad3e5485d45c992233c96acd902992dfc4 ]

Return "-EMSGSIZE" instead of "-EINVAL" when filling a QP entry, so that
new SKBs will be allocated if there's not enough room in current SKB.

Fixes: 65959522f806 ("RDMA: Add support to dump resource tracker in RAW format")
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Link: https://lore.kernel.org/r/b5e9c62f6b8369acab5648b661bf539cbceeffdc.1669636336.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: avoid victim selection from previous victim section

[ Upstream commit e219aecfd4b766c4e878a3769057e9809f7fcadc ]

When f2fs chooses GC victim in large section & LFS mode,
next_victim_seg[gc_type] is referenced first. After segment is freed,
next_victim_seg[gc_type] has the next segment number.
However, next_victim_seg[gc_type] still has the last segment number
even after the last segment of section is freed. In this case, when f2fs
chooses a victim for the next GC round, the last segment of previous victim
section is chosen as a victim.

Initialize next_victim_seg[gc_type] to NULL_SEGNO for the last segment in
large section.

Fixes: e3080b0120a1 ("f2fs: support subsectional garbage collection")
Signed-off-by: Yonggil Song <yonggil.song@samsung.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/nldev: Add checks for nla_nest_start() in fill_stat_counter_qps()

[ Upstream commit ea5ef136e215fdef35f14010bc51fcd6686e6922 ]

As the nla_nest_start() may fail with NULL returned, the return value needs
to be checked.

Fixes: c4ffee7c9bdb ("RDMA/netlink: Implement counter dumpit calback")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221126043410.85632-1-yuancan@huawei.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: snic: Fix possible UAF in snic_tgt_create()

[ Upstream commit e118df492320176af94deec000ae034cc92be754 ]

Smatch reports a warning as follows:

drivers/scsi/snic/snic_disc.c:307 snic_tgt_create() warn:
  '&tgt->list' not removed from list

If device_add() fails in snic_tgt_create(), tgt will be freed, but
tgt->list will not be removed from snic->disc.tgt_list, then list traversal
may cause UAF.

Remove from snic->disc.tgt_list before free().

Fixes: c8806b6c9e82 ("snic: driver for Cisco SCSI HBA")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20221117035100.2944812-1-cuigaosheng1@huawei.com
Acked-by: Narsimhulu Musini <nmusini@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: fcoe: Fix transport not deattached when fcoe_if_init() fails

[ Upstream commit 4155658cee394b22b24c6d64e49247bf26d95b92 ]

fcoe_init() calls fcoe_transport_attach(&fcoe_sw_transport), but when
fcoe_if_init() fails, &fcoe_sw_transport is not detached and leaves freed
&fcoe_sw_transport on fcoe_transports list. This causes panic when
reinserting module.

 BUG: unable to handle page fault for address: fffffbfff82e2213
 RIP: 0010:fcoe_transport_attach+0xe1/0x230 [libfcoe]
 Call Trace:
  <TASK>
  do_one_initcall+0xd0/0x4e0
  load_module+0x5eee/0x7210
  ...

Fixes: 78a582463c1e ("[SCSI] fcoe: convert fcoe.ko to become an fcoe transport provider driver")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Link: https://lore.kernel.org/r/20221115092442.133088-1-chenzhongjin@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ipr: Fix WARNING in ipr_init()

[ Upstream commit e6f108bffc3708ddcff72324f7d40dfcd0204894 ]

ipr_init() will not call unregister_reboot_notifier() when
pci_register_driver() fails, which causes a WARNING. Call
unregister_reboot_notifier() when pci_register_driver() fails.

notifier callback ipr_halt [ipr] already registered
WARNING: CPU: 3 PID: 299 at kernel/notifier.c:29
notifier_chain_register+0x16d/0x230
Modules linked in: ipr(+) xhci_pci_renesas xhci_hcd ehci_hcd usbcore
led_class gpu_sched drm_buddy video wmi drm_ttm_helper ttm
drm_display_helper drm_kms_helper drm drm_panel_orientation_quirks
agpgart cfbft
CPU: 3 PID: 299 Comm: modprobe Tainted: G        W
6.1.0-rc1-00190-g39508d23b672-dirty #332
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
RIP: 0010:notifier_chain_register+0x16d/0x230
Call Trace:
 <TASK>
 __blocking_notifier_chain_register+0x73/0xb0
 ipr_init+0x30/0x1000 [ipr]
 do_one_initcall+0xdb/0x480
 do_init_module+0x1cf/0x680
 load_module+0x6a50/0x70a0
 __do_sys_finit_module+0x12f/0x1c0
 do_syscall_64+0x3f/0x90
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: f72919ec2bbb ("[SCSI] ipr: implement shutdown changes and remove obsolete write cache parameter")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Link: https://lore.kernel.org/r/20221113064513.14028-1-shangxiaojing@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: scsi_debug: Fix possible name leak in sdebug_add_host_helper()

[ Upstream commit e6d773f93a49e0eda88a903a2a6542ca83380eb1 ]

Afer commit 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id
string array"), the name of device is allocated dynamically, it needs be
freed when device_register() returns error.

As comment of device_register() says, one should use put_device() to give
up the reference in the error path. Fix this by calling put_device(), then
the name can be freed in kobject_cleanup(), and sdbg_host is freed in
sdebug_release_adapter().

When the device release is not set, it means the device is not initialized.
We can not call put_device() in this case. Use kfree() to free memory.

Fixes: 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221112131010.3757845-1-yangyingliang@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: fcoe: Fix possible name leak when device_register() fails

[ Upstream commit 47b6a122c7b69a876c7ee2fc064a26b09627de9d ]

If device_register() returns an error, the name allocated by dev_set_name()
needs to be freed. As the comment of device_register() says, one should use
put_device() to give up the reference in the error path. Fix this by
calling put_device(), then the name can be freed in kobject_cleanup().

The 'fcf' is freed in fcoe_fcf_device_release(), so the kfree() in the
error path can be removed.

The 'ctlr' is freed in fcoe_ctlr_device_release(), so don't use the error
label, just return NULL after calling put_device().

Fixes: 9a74e884ee71 ("[SCSI] libfcoe: Add fcoe_sysfs")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221112094310.3633291-1-yangyingliang@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: scsi_debug: Fix a warning in resp_report_zones()

[ Upstream commit 07f2ca139d9a7a1ba71c4c03997c8de161db2346 ]

As 'alloc_len' is user controlled data, if user tries to allocate memory
larger than(>=) MAX_ORDER, then kcalloc() will fail, it creates a stack
trace and messes up dmesg with a warning.

Add __GFP_NOWARN in order to avoid too large allocation warning.  This is
detected by static analysis using smatch.

Fixes: 7db0e0c8190a ("scsi: scsi_debug: Fix buffer size of REPORT ZONES command")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20221112070612.2121535-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: scsi_debug: Fix a warning in resp_verify()

[ Upstream commit ed0f17b748b20271cb568c7ca0b23b120316a47d ]

As 'vnum' is controlled by user, so if user tries to allocate memory larger
than(>=) MAX_ORDER, then kcalloc() will fail, it creates a stack trace and
messes up dmesg with a warning.

Add __GFP_NOWARN in order to avoid too large allocation warning.  This is
detected by static analysis using smatch.

Fixes: c3e2fe9222d4 ("scsi: scsi_debug: Implement VERIFY(10), add VERIFY(16)")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20221112070031.2121068-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: efct: Fix possible memleak in efct_device_init()

[ Upstream commit bb0cd225dd37df1f4a22e36dad59ff33178ecdfc ]

In efct_device_init(), when efct_scsi_reg_fc_transport() fails,
efct_scsi_tgt_driver_exit() is not called to release memory for
efct_scsi_tgt_driver_init() and causes memleak:

unreferenced object 0xffff8881020ce000 (size 2048):
  comm "modprobe", pid 465, jiffies 4294928222 (age 55.872s)
  backtrace:
    [<0000000021a1ef1b>] kmalloc_trace+0x27/0x110
    [<000000004c3ed51c>] target_register_template+0x4fd/0x7b0 [target_core_mod]
    [<00000000f3393296>] efct_scsi_tgt_driver_init+0x18/0x50 [efct]
    [<00000000115de533>] 0xffffffffc0d90011
    [<00000000d608f646>] do_one_initcall+0xd0/0x4e0
    [<0000000067828cf1>] do_init_module+0x1cc/0x6a0
    ...

Fixes: 4df84e846624 ("scsi: elx: efct: Driver initialization routines")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Link: https://lore.kernel.org/r/20221111074046.57061-1-chenzhongjin@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: hpsa: Fix possible memory leak in hpsa_add_sas_device()

[ Upstream commit fda34a5d304d0b98cc967e8763b52221b66dc202 ]

If hpsa_sas_port_add_rphy() returns an error, the 'rphy' allocated in
sas_end_device_alloc() needs to be freed. Address this by calling
sas_rphy_free() in the error path.

Fixes: d04e62b9d63a ("hpsa: add in sas transport class")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221111043012.1074466-1-yangyingliang@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: hpsa: Fix error handling in hpsa_add_sas_host()

[ Upstream commit 4ef174a3ad9b5d73c1b6573e244ebba2b0d86eac ]

hpsa_sas_port_add_phy() does:
  ...
  sas_phy_add()  -> may return error here
  sas_port_add_phy()
  ...

Whereas hpsa_free_sas_phy() does:
  ...
  sas_port_delete_phy()
  sas_phy_delete()
  ...

If hpsa_sas_port_add_phy() returns an error, hpsa_free_sas_phy() can not be
called to free the memory because the port and the phy have not been added
yet.

Replace hpsa_free_sas_phy() with sas_phy_free() and kfree() to avoid kernel
crash in this case.

Fixes: d04e62b9d63a ("hpsa: add in sas transport class")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221110151129.394389-1-yangyingliang@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: mpt3sas: Fix possible resource leaks in mpt3sas_transport_port_add()

[ Upstream commit 78316e9dfc24906dd474630928ed1d3c562b568e ]

In mpt3sas_transport_port_add(), if sas_rphy_add() returns error,
sas_rphy_free() needs be called to free the resource allocated in
sas_end_device_alloc(). Otherwise a kernel crash will happen:

Unable to handle kernel NULL pointer dereference at virtual address 0000000000000108
CPU: 45 PID: 37020 Comm: bash Kdump: loaded Tainted: G        W          6.1.0-rc1+ #189
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : device_del+0x54/0x3d0
lr : device_del+0x37c/0x3d0
Call trace:
 device_del+0x54/0x3d0
 attribute_container_class_device_del+0x28/0x38
 transport_remove_classdev+0x6c/0x80
 attribute_container_device_trigger+0x108/0x110
 transport_remove_device+0x28/0x38
 sas_rphy_remove+0x50/0x78 [scsi_transport_sas]
 sas_port_delete+0x30/0x148 [scsi_transport_sas]
 do_sas_phy_delete+0x78/0x80 [scsi_transport_sas]
 device_for_each_child+0x68/0xb0
 sas_remove_children+0x30/0x50 [scsi_transport_sas]
 sas_rphy_remove+0x38/0x78 [scsi_transport_sas]
 sas_port_delete+0x30/0x148 [scsi_transport_sas]
 do_sas_phy_delete+0x78/0x80 [scsi_transport_sas]
 device_for_each_child+0x68/0xb0
 sas_remove_children+0x30/0x50 [scsi_transport_sas]
 sas_remove_host+0x20/0x38 [scsi_transport_sas]
 scsih_remove+0xd8/0x420 [mpt3sas]

Because transport_add_device() is not called when sas_rphy_add() fails, the
device is not added. When sas_rphy_remove() is subsequently called to
remove the device in the remove() path, a NULL pointer dereference happens.

Fixes: f92363d12359 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221109032403.1636422-1-yangyingliang@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

padata: Fix list iterator in padata_do_serial()

[ Upstream commit 57ddfecc72a6c9941d159543e1c0c0a74fe9afdd ]

list_for_each_entry_reverse() assumes that the iterated list is nonempty
and that every list_head is embedded in the same type, but its use in
padata_do_serial() breaks both rules.

This doesn't cause any issues now because padata_priv and padata_list
happen to have their list fields at the same offset, but we really
shouldn't be relying on that.

Fixes: bfde23ce200e ("padata: unbind parallel jobs from specific CPUs")
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

padata: Always leave BHs disabled when running ->parallel()

[ Upstream commit 34c3a47d20ae55b3600fed733bf96eafe9c500d5 ]

A deadlock can happen when an overloaded system runs ->parallel() in the
context of the current task:

    padata_do_parallel
      ->parallel()
        pcrypt_aead_enc/dec
          padata_do_serial
            spin_lock(&reorder->lock) // BHs still enabled
              <interrupt>
                ...
                  __do_softirq
                    ...
                      padata_do_serial
                        spin_lock(&reorder->lock)

It's a bug for BHs to be on in _do_serial as Steffen points out, so
ensure they're off in the "current task" case like they are in
padata_parallel_worker to avoid this situation.

Reported-by: syzbot+bc05445bc14148d51915@syzkaller.appspotmail.com
Fixes: 4611ce224688 ("padata: allocate work structures for parallel jobs from a pool")
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: tcrypt - Fix multibuffer skcipher speed test mem leak

[ Upstream commit 1aa33fc8d4032227253ceb736f47c52b859d9683 ]

In the past, the data for mb-skcipher test has been allocated
twice, that means the first allcated memory area is without
free, which may cause a potential memory leakage. So this
patch is to remove one allocation to fix this error.

Fixes: e161c5930c15 ("crypto: tcrypt - add multibuf skcipher...")
Signed-off-by: Zhang Yiqun <zhangyiqun@phytium.com.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: hpsa: Fix possible memory leak in hpsa_init_one()

[ Upstream commit 9c9ff300e0de07475796495d86f449340d454a0c ]

The hpda_alloc_ctlr_info() allocates h and its field reply_map. However, in
hpsa_init_one(), if alloc_percpu() failed, the hpsa_init_one() jumps to
clean1 directly, which frees h and leaks the h->reply_map.

Fix by calling hpda_free_ctlr_info() to release h->replay_map and h instead
free h directly.

Fixes: 8b834bff1b73 ("scsi: hpsa: fix selection of reply queue")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221122015751.87284-1-yuancan@huawei.com
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dt-bindings: visconti-pcie: Fix interrupts array max constraints

[ Upstream commit 4cf4b9b70ab2785461190c08a3542d2d74c28b46 ]

In accordance with the way the device DT-node is actually defined in
arch/arm64/boot/dts/toshiba/tmpv7708.dtsi and the way the device is probed
by the DW PCIe driver there are two IRQs it actually has. It's MSI IRQ the
DT-bindings lack. Let's extend the interrupts property constraints then
and fix the schema example so one would be acceptable by the actual device
DT-bindings.

Link: https://lore.kernel.org/r/20221113191301.5526-3-Sergey.Semin@baikalelectronics.ru
Fixes: 17c1b16340f0 ("dt-bindings: pci: Add DT binding for Toshiba Visconti PCIe controller")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dt-bindings: imx6q-pcie: Fix clock names for imx6sx and imx8mq

[ Upstream commit b8a83e600bdde93e7da41ea3204b2b3832a3c99b ]

Originally as it was defined the legacy bindings the pcie_inbound_axi and
pcie_aux clock names were supposed to be used in the fsl,imx6sx-pcie and
fsl,imx8mq-pcie devices respectively. But the bindings conversion has been
incorrectly so now the fourth clock name is defined as "pcie_inbound_axi
for imx6sx-pcie, pcie_aux for imx8mq-pcie", which is completely wrong.
Let's fix that by conditionally apply the clock-names constraints based on
the compatible string content.

Link: https://lore.kernel.org/r/20221113191301.5526-2-Sergey.Semin@baikalelectronics.ru
Fixes: 751ca492f131 ("dt-bindings: PCI: imx6: convert the imx pcie controller to dtschema")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rxe: Fix NULL-ptr-deref in rxe_qp_do_cleanup() when socket create failed

[ Upstream commit f67376d801499f4fa0838c18c1efcad8840e550d ]

There is a null-ptr-deref when mount.cifs over rdma:

  BUG: KASAN: null-ptr-deref in rxe_qp_do_cleanup+0x2f3/0x360 [rdma_rxe]
  Read of size 8 at addr 0000000000000018 by task mount.cifs/3046

  CPU: 2 PID: 3046 Comm: mount.cifs Not tainted 6.1.0-rc5+ #62
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc3
  Call Trace:
   <TASK>
   dump_stack_lvl+0x34/0x44
   kasan_report+0xad/0x130
   rxe_qp_do_cleanup+0x2f3/0x360 [rdma_rxe]
   execute_in_process_context+0x25/0x90
   __rxe_cleanup+0x101/0x1d0 [rdma_rxe]
   rxe_create_qp+0x16a/0x180 [rdma_rxe]
   create_qp.part.0+0x27d/0x340
   ib_create_qp_kernel+0x73/0x160
   rdma_create_qp+0x100/0x230
   _smbd_get_connection+0x752/0x20f0
   smbd_get_connection+0x21/0x40
   cifs_get_tcp_session+0x8ef/0xda0
   mount_get_conns+0x60/0x750
   cifs_mount+0x103/0xd00
   cifs_smb3_do_mount+0x1dd/0xcb0
   smb3_get_tree+0x1d5/0x300
   vfs_get_tree+0x41/0xf0
   path_mount+0x9b3/0xdd0
   __x64_sys_mount+0x190/0x1d0
   do_syscall_64+0x35/0x80
   entry_SYSCALL_64_after_hwframe+0x46/0xb0

The root cause of the issue is the socket create failed in
rxe_qp_init_req().

So move the reset rxe_qp_do_cleanup() after the NULL ptr check.

Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20221122151437.1057671-1-zhangxiaoxu5@huawei.com
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: fix memory leak in hns_roce_alloc_mr()

[ Upstream commit a115aa00b18f7b8982b8f458149632caf64a862a ]

When hns_roce_mr_enable() failed in hns_roce_alloc_mr(), mr_key is not
released. Compiled test only.

Fixes: 9b2cf76c9f05 ("RDMA/hns: Optimize PBL buffer allocation process")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221119070834.48502-1-shaozhengchao@huawei.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: ccree - Make cc_debugfs_global_fini() available for module init function

[ Upstream commit 8e96729fc26c8967db45a3fb7a60387619f77a22 ]

ccree_init() calls cc_debugfs_global_fini(), the former is an init
function and the latter an exit function though.

A modular build emits:

WARNING: modpost: drivers/crypto/ccree/ccree.o: section mismatch in reference: init_module (section: .init.text) -> cc_debugfs_global_fini (section: .exit.text)

(with CONFIG_DEBUG_SECTION_MISMATCH=y).

Fixes: 4f1c596df706 ("crypto: ccree - Remove debugfs when platform_driver_register failed")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hfi: Decrease PCI device reference count in error path

[ Upstream commit 9b51d072da1d27e1193e84708201c48e385ad912 ]

pci_get_device() will increase the reference count for the returned
pci_dev, and also decrease the reference count for the input parameter
*from* if it is not NULL.

If we break out the loop in node_affinity_init() with 'dev' not NULL, we
need to call pci_dev_put() to decrease the reference count. Add missing
pci_dev_put() in error path.

Fixes: c513de490f80 ("IB/hfi1: Invalid NUMA node information can cause a divide by zero")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/20221117131546.113280-1-wangxiongfeng2@huawei.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Check for alloc failure in pci_request_irq()

[ Upstream commit 2d9cd957d40c3ac491b358e7cff0515bb07a3a9c ]

When kvasprintf() fails to allocate memory, it returns a NULL pointer.
Return error from pci_request_irq() so we don't dereference it.

[bhelgaas: commit log]
Fixes: 704e8953d3e9 ("PCI/irq: Add pci_request_irq() and pci_free_irq() helpers")
Link: https://lore.kernel.org/r/20221121020029.3759444-1-zengheng4@huawei.com
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Fix ext_sge num error when post send

[ Upstream commit 8eaa6f7d569b4a22bfc1b0a3fdfeeb401feb65a4 ]

In the HNS ROCE driver, The sge is divided into standard sge and extended
sge.  There are 2 standard sge in RC/XRC, and the UD standard sge is 0.
In the scenario of RC SQ inline, if the data does not exceed 32bytes, the
standard sge will be used. If it exceeds, only the extended sge will be
used to fill the data.

Currently, when filling the extended sge, max_gs is directly used as the
number of the extended sge, which did not subtract the number of standard
sge.  There is a logical error. The new algorithm subtracts the number of
standard sge from max_gs to get the actual number of extended sge.

Fixes: 30b707886aeb ("RDMA/hns: Support inline data in extented sge space for RC")
Link: https://lore.kernel.org/r/20221108133847.2304539-2-xuhaoyue1@hisilicon.com
Signed-off-by: Luoyouming <luoyouming@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Repacing 'dseg_len' by macros in fill_ext_sge_inl_data()

[ Upstream commit 3b1f864c904915b3baebffb31ea05ee704b0df3c ]

The sge size is known to be constant, so it's unnecessary to use sizeof to
calculate.

Link: https://lore.kernel.org/r/20220922123315.3732205-11-xuhaoyue1@hisilicon.com
Signed-off-by: Luoyouming <luoyouming@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Stable-dep-of: 8eaa6f7d569b ("RDMA/hns: Fix ext_sge num error when post send")
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: hisilicon/qm - add missing pci_dev_put() in q_num_set()

[ Upstream commit cc7710d0d4ebc6998f04035cde4f32c5ddbe9d7f ]

pci_get_device() will increase the reference count for the returned
pci_dev. We need to use pci_dev_put() to decrease the reference count
before q_num_set() returns.

Fixes: c8b4b477079d ("crypto: hisilicon - add HiSilicon HPRE accelerator")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Reviewed-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: cryptd - Use request context instead of stack for sub-request

[ Upstream commit 3a58c231172537f7b0e19d93ed33decd04f80eab ]

cryptd is buggy as it tries to use sync_skcipher without going
through the proper sync_skcipher interface.  In fact it doesn't
even need sync_skcipher since it's already a proper skcipher and
can easily access the request context instead of using something
off the stack.

Fixes: 36b3875a97b8 ("crypto: cryptd - Remove VLA usage of skcipher")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: ccree - Remove debugfs when platform_driver_register failed

[ Upstream commit 4f1c596df706c9aca662b6c214fad84047ae2a97 ]

When platform_driver_register failed, we need to remove debugfs,
which will caused a resource leak, fix it.

Failed logs as follows:
[   32.606488] debugfs: Directory 'ccree' with parent '/' already present!

Fixes: 4c3f97276e15 ("crypto: ccree - introduce CryptoCell driver")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: scsi_debug: Fix a warning in resp_write_scat()

[ Upstream commit 216e179724c1d9f57a8ababf8bd7aaabef67f01b ]

As 'lbdof_blen' is coming from user, if the size in kzalloc() is >=
MAX_ORDER then we hit a warning.

Call trace:

sg_ioctl
 sg_ioctl_common
   scsi_ioctl
    sg_scsi_ioctl
     blk_execute_rq
      blk_mq_sched_insert_request
       blk_mq_run_hw_queue
        __blk_mq_delay_run_hw_queue
         __blk_mq_run_hw_queue
          blk_mq_sched_dispatch_requests
           __blk_mq_sched_dispatch_requests
            blk_mq_dispatch_rq_list
             scsi_queue_rq
              scsi_dispatch_cmd
               scsi_debug_queuecommand
                schedule_resp
                 resp_write_scat

If you try to allocate a memory larger than(>=) MAX_ORDER, then kmalloc()
will definitely fail.  It creates a stack trace and messes up dmesg.  The
user controls the size here so if they specify a too large size it will
fail.

Add __GFP_NOWARN in order to avoid too large allocation warning.  This is
detected by static analysis using smatch.

Fixes: 481b5e5c7949 ("scsi: scsi_debug: add resp_write_scat function")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20221111100526.1790533-1-harshit.m.mogalapalli@oracle.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/siw: Set defined status for work completion with undefined status

[ Upstream commit 60da2d11fcbc043304910e4d2ca82f9bab953e63 ]

A malicious user may write undefined values into memory mapped completion
queue elements status or opcode. Undefined status or opcode values will
result in out-of-bounds access to an array mapping siw internal
representation of opcode and status to RDMA core representation when
reaping CQ elements. While siw detects those undefined values, it did not
correctly set completion status to a defined value, thus defeating the
whole purpose of the check.

This bug leads to the following Smatch static checker warning:

drivers/infiniband/sw/siw/siw_cq.c:96 siw_reap_cqe()
error: buffer overflow 'map_cqe_status' 10 <= 21

Fixes: bdf1da5df9da ("RDMA/siw: Fix immediate work request flush to completion queue")
Link: https://lore.kernel.org/r/20221115170747.1263298-1-bmt@zurich.ibm.com
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/nldev: Return "-EAGAIN" if the cm_id isn't from expected port

[ Upstream commit ecacb3751f254572af0009b9501e2cdc83a30b6a ]

When filling a cm_id entry, return "-EAGAIN" instead of 0 if the cm_id
doesn'the have the same port as requested, otherwise an incomplete entry
may be returned, which causes "rdam res show cm_id" to return an error.

For example on a machine with two rdma devices with "rping -C 1 -v -s"
running background, the "rdma" command fails:
  $ rdma -V
  rdma utility, iproute2-5.19.0
  $ rdma res show cm_id
  link mlx5_0/- cm-idn 0 state LISTEN ps TCP pid 28056 comm rping src-addr 0.0.0.0:7174
  error: Protocol not available

While with this fix it succeeds:
  $ rdma res show cm_id
  link mlx5_0/- cm-idn 0 state LISTEN ps TCP pid 26395 comm rping src-addr 0.0.0.0:7174
  link mlx5_1/- cm-idn 0 state LISTEN ps TCP pid 26395 comm rping src-addr 0.0.0.0:7174

Fixes: 00313983cda6 ("RDMA/nldev: provide detailed CM_ID information")
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/a08e898cdac5e28428eb749a99d9d981571b8ea7.1667810736.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/core: Make sure "ib_port" is valid when access sysfs node

[ Upstream commit 5e15ff29b156bbbdeadae230c8ecd5ecd8ca2477 ]

The "ib_port" structure must be set before adding the sysfs kobject,
and reset after removing it, otherwise it may crash when accessing
the sysfs node:
  Unable to handle kernel NULL pointer dereference at virtual address 0000000000000050
  Mem abort info:
    ESR = 0x96000006
    Exception class = DABT (current EL), IL = 32 bits
    SET = 0, FnV = 0
    EA = 0, S1PTW = 0
  Data abort info:
    ISV = 0, ISS = 0x00000006
    CM = 0, WnR = 0
  user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000e85f5ba5
  [0000000000000050] pgd=0000000848fd9003, pud=000000085b387003, pmd=0000000000000000
  Internal error: Oops: 96000006 [#2] PREEMPT SMP
  Modules linked in: ib_umad(O) mlx5_ib(O) nfnetlink_cttimeout(E) nfnetlink(E) act_gact(E) cls_flower(E) sch_ingress(E) openvswitch(E) nsh(E) nf_nat_ipv6(E) nf_nat_ipv4(E) nf_conncount(E) nf_nat(E) nf_conntrack(E) nf_defrag_ipv6(E) nf_defrag_ipv4(E) mst_pciconf(O) ipmi_devintf(E) ipmi_msghandler(E) ipmb_dev_int(OE) mlx5_core(O) mlxfw(O) mlxdevm(O) auxiliary(O) ib_uverbs(O) ib_core(O) mlx_compat(O) psample(E) sbsa_gwdt(E) uio_pdrv_genirq(E) uio(E) mlxbf_pmc(OE) mlxbf_gige(OE) mlxbf_tmfifo(OE) gpio_mlxbf2(OE) pwr_mlxbf(OE) mlx_trio(OE) i2c_mlxbf(OE) mlx_bootctl(OE) bluefield_edac(OE) knem(O) ip_tables(E) ipv6(E) crc_ccitt(E) [last unloaded: mst_pci]
  Process grep (pid: 3372, stack limit = 0x0000000022055c92)
  CPU: 5 PID: 3372 Comm: grep Tainted: G      D    OE     4.19.161-mlnx.47.gadcd9e3 #1
  Hardware name: https://www.mellanox.com BlueField SoC/BlueField SoC, BIOS BlueField:3.9.2-15-ga2403ab Sep  8 2022
  pstate: 40000005 (nZcv daif -PAN -UAO)
  pc : hw_stat_port_show+0x4c/0x80 [ib_core]
  lr : port_attr_show+0x40/0x58 [ib_core]
  sp : ffff000029f43b50
  x29: ffff000029f43b50 x28: 0000000019375000
  x27: ffff8007b821a540 x26: ffff000029f43e30
  x25: 0000000000008000 x24: ffff000000eaa958
  x23: 0000000000001000 x22: ffff8007a4ce3000
  x21: ffff8007baff8000 x20: ffff8007b9066ac0
  x19: ffff8007bae97578 x18: 0000000000000000
  x17: 0000000000000000 x16: 0000000000000000
  x15: 0000000000000000 x14: 0000000000000000
  x13: 0000000000000000 x12: 0000000000000000
  x11: 0000000000000000 x10: 0000000000000000
  x9 : 0000000000000000 x8 : ffff8007a4ce4000
  x7 : 0000000000000000 x6 : 000000000000003f
  x5 : ffff000000e6a280 x4 : ffff8007a4ce3000
  x3 : 0000000000000000 x2 : aaaaaaaaaaaaaaab
  x1 : ffff8007b9066a10 x0 : ffff8007baff8000
  Call trace:
   hw_stat_port_show+0x4c/0x80 [ib_core]
   port_attr_show+0x40/0x58 [ib_core]
   sysfs_kf_seq_show+0x8c/0x150
   kernfs_seq_show+0x44/0x50
   seq_read+0x1b4/0x45c
   kernfs_fop_read+0x148/0x1d8
   __vfs_read+0x58/0x180
   vfs_read+0x94/0x154
   ksys_read+0x68/0xd8
   __arm64_sys_read+0x28/0x34
   el0_svc_common+0x88/0x18c
   el0_svc_handler+0x78/0x94
   el0_svc+0x8/0xe8
  Code: f2955562 aa1603e4 aa1503e0 f9405683 (f9402861)

Fixes: d8a5883814b9 ("RDMA/core: Replace the ib_port_data hw_stats pointers with a ib_port pointer")
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://lore.kernel.org/r/88867e705c42c1cd2011e45201c25eecdb9fef94.1667810736.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/restrack: Release MR restrack when delete

[ Upstream commit dac153f2802db1ad46207283cb9b2aae3d707a45 ]

The MR restrack also needs to be released when delete it, otherwise it
cause memory leak as the task struct won't be released.

Fixes: 13ef5539def7 ("RDMA/restrack: Count references to the verbs objects")
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://lore.kernel.org/r/703db18e8d4ef628691fb93980a709be673e62e3.1667810736.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: vmd: Disable MSI remapping after suspend

[ Upstream commit d899aa668498c07ff217b666ae9712990306e682 ]

MSI remapping is disabled by VMD driver for Intel's Icelake and
newer systems in order to improve performance by setting
VMCONFIG_MSI_REMAP. By design VMCONFIG_MSI_REMAP register is cleared
by firmware during boot. The same register gets cleared when system
is put in S3 power state. VMD driver needs to set this register again
in order to avoid interrupt issues with devices behind VMD if MSI
remapping was disabled before.

Link: https://lore.kernel.org/r/20221109142652.450998-1-nirmal.patel@linux.intel.com
Fixes: ee81ee84f873 ("PCI: vmd: Disable MSI-X remapping when possible")
Signed-off-by: Nirmal Patel <nirmal.patel@linux.intel.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Francisco Munoz <francisco.munoz.ruiz@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/mad: Don't call to function that might sleep while in atomic context

[ Upstream commit 5c20311d76cbaeb7ed2ecf9c8b8322f8fc4a7ae3 ]

Tracepoints are not allowed to sleep, as such the following splat is
generated due to call to ib_query_pkey() in atomic context.

WARNING: CPU: 0 PID: 1888000 at kernel/trace/ring_buffer.c:2492 rb_commit+0xc1/0x220
CPU: 0 PID: 1888000 Comm: kworker/u9:0 Kdump: loaded Tainted: G           OE    --------- -  - 4.18.0-305.3.1.el8.x86_64 #1
 Hardware name: Red Hat KVM, BIOS 1.13.0-2.module_el8.3.0+555+a55c8938 04/01/2014
 Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core]
 RIP: 0010:rb_commit+0xc1/0x220
 RSP: 0000:ffffa8ac80f9bca0 EFLAGS: 00010202
 RAX: ffff8951c7c01300 RBX: ffff8951c7c14a00 RCX: 0000000000000246
 RDX: ffff8951c707c000 RSI: ffff8951c707c57c RDI: ffff8951c7c14a00
 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
 R10: ffff8951c7c01300 R11: 0000000000000001 R12: 0000000000000246
 R13: 0000000000000000 R14: ffffffff964c70c0 R15: 0000000000000000
 FS:  0000000000000000(0000) GS:ffff8951fbc00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f20e8f39010 CR3: 000000002ca10005 CR4: 0000000000170ef0
 Call Trace:
  ring_buffer_unlock_commit+0x1d/0xa0
  trace_buffer_unlock_commit_regs+0x3b/0x1b0
  trace_event_buffer_commit+0x67/0x1d0
  trace_event_raw_event_ib_mad_recv_done_handler+0x11c/0x160 [ib_core]
  ib_mad_recv_done+0x48b/0xc10 [ib_core]
  ? trace_event_raw_event_cq_poll+0x6f/0xb0 [ib_core]
  __ib_process_cq+0x91/0x1c0 [ib_core]
  ib_cq_poll_work+0x26/0x80 [ib_core]
  process_one_work+0x1a7/0x360
  ? create_worker+0x1a0/0x1a0
  worker_thread+0x30/0x390
  ? create_worker+0x1a0/0x1a0
  kthread+0x116/0x130
  ? kthread_flush_work_fn+0x10/0x10
  ret_from_fork+0x35/0x40
 ---[ end trace 78ba8509d3830a16 ]---

Fixes: 821bf1de45a1 ("IB/MAD: Add recv path trace point")
Signed-off-by: Leonid Ravich <lravich@gmail.com>
Link: https://lore.kernel.org/r/Y2t5feomyznrVj7V@leonid-Inspiron-3421
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/siw: Fix immediate work request flush to completion queue

[ Upstream commit bdf1da5df9da680589a7f74448dd0a94dd3e1446 ]

Correctly set send queue element opcode during immediate work request
flushing in post sendqueue operation, if the QP is in ERROR state.
An undefined ocode value results in out-of-bounds access to an array
for mapping the opcode between siw internal and RDMA core representation
in work completion generation. It resulted in a KASAN BUG report
of type 'global-out-of-bounds' during NFSoRDMA testing.

This patch further fixes a potential case of a malicious user which may
write undefined values for completion queue elements status or opcode,
if the CQ is memory mapped to user land. It avoids the same out-of-bounds
access to arrays for status and opcode mapping as described above.

Fixes: 303ae1cdfdf7 ("rdma/siw: application interface")
Fixes: b0fff7317bb4 ("rdma/siw: completion queue methods")
Reported-by: Olga Kornievskaia <kolga@netapp.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://lore.kernel.org/r/20221107145057.895747-1-bmt@zurich.ibm.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Fix set-but-not-used variable warnings

[ Upstream commit 4fb2169d66b837a2986f569f5d5b81f79e6e4a4c ]

Fix the following two compiler warnings:

drivers/scsi/qla2xxx/qla_init.c: In function ‘qla24xx_async_abort_cmd’:
drivers/scsi/qla2xxx/qla_init.c:171:17: warning: variable ‘bail’ set but not used [-Wunused-but-set-variable]
  171 |         uint8_t bail;
      |                 ^~~~
drivers/scsi/qla2xxx/qla_init.c: In function ‘qla2x00_async_tm_cmd’:
drivers/scsi/qla2xxx/qla_init.c:2023:17: warning: variable ‘bail’ set but not used [-Wunused-but-set-variable]
 2023 |         uint8_t bail;
      |                 ^~~~

Cc: Arun Easi <arun.easi@qlogic.com>
Cc: Giridhar Malavali <giridhar.malavali@qlogic.com>
Fixes: feafb7b1714c ("[SCSI] qla2xxx: Fix vport delete issues")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221031224818.2607882-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/irdma: Report the correct link speed

[ Upstream commit 4eace75e0853273755b878ffa9cce6de84df975a ]

The active link speed is currently hard-coded in irdma_query_port due
to which the port rate in ibstatus does reflect the active link speed.

Call ib_get_eth_speed in irdma_query_port to get the active link speed.

Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Reported-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20221104234957.1135-1-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to destroy sbi->post_read_wq in error path of f2fs_fill_super()

[ Upstream commit 7b02b2201893a71b881026cf574902019ab00db5 ]

In error path of f2fs_fill_super(), this patch fixes to call
f2fs_destroy_post_read_wq() once if we fail in f2fs_start_ckpt_thread().

Fixes: 261eeb9c1585 ("f2fs: introduce checkpoint_merge mount option")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix normal discard process

[ Upstream commit b5f1a218ae5e4339130d6e733f0e63d623e09a2c ]

In the DPOLICY_BG mode, there is a conflict between
the two conditions "i + 1 < dpolicy->granularity" and
"i < DEFAULT_DISCARD_GRANULARITY". If i = 15, the first
condition is false, it will enter the second condition
and dispatch all small granularity discards in function
 __issue_discard_cmd_orderly. The restrictive effect
of the first condition to small discards will be
invalidated. These two conditions should align.

Fixes: 20ee4382322c ("f2fs: issue small discard by LBA order")
Signed-off-by: Dongdong Zhang <zhangdongdong1@oppo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to invalidate dcc->f2fs_issue_discard in error path

[ Upstream commit 91586ce0d39a05f88795aa8814fb99b1387236b3 ]

Syzbot reports a NULL pointer dereference issue as below:

 __refcount_add include/linux/refcount.h:193 [inline]
 __refcount_inc include/linux/refcount.h:250 [inline]
 refcount_inc include/linux/refcount.h:267 [inline]
 get_task_struct include/linux/sched/task.h:110 [inline]
 kthread_stop+0x34/0x1c0 kernel/kthread.c:703
 f2fs_stop_discard_thread+0x3c/0x5c fs/f2fs/segment.c:1638
 kill_f2fs_super+0x5c/0x194 fs/f2fs/super.c:4522
 deactivate_locked_super+0x70/0xe8 fs/super.c:332
 deactivate_super+0xd0/0xd4 fs/super.c:363
 cleanup_mnt+0x1f8/0x234 fs/namespace.c:1186
 __cleanup_mnt+0x20/0x30 fs/namespace.c:1193
 task_work_run+0xc4/0x14c kernel/task_work.c:177
 exit_task_work include/linux/task_work.h:38 [inline]
 do_exit+0x26c/0xbe0 kernel/exit.c:795
 do_group_exit+0x60/0xe8 kernel/exit.c:925
 __do_sys_exit_group kernel/exit.c:936 [inline]
 __se_sys_exit_group kernel/exit.c:934 [inline]
 __wake_up_parent+0x0/0x40 kernel/exit.c:934
 __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline]
 invoke_syscall arch/arm64/kernel/syscall.c:52 [inline]
 el0_svc_common+0x138/0x220 arch/arm64/kernel/syscall.c:142
 do_el0_svc+0x48/0x164 arch/arm64/kernel/syscall.c:206
 el0_svc+0x58/0x150 arch/arm64/kernel/entry-common.c:636
 el0t_64_sync_handler+0x84/0xf0 arch/arm64/kernel/entry-common.c:654
 el0t_64_sync+0x18c/0x190 arch/arm64/kernel/entry.S:581

The root cause of this issue is in error path of f2fs_start_discard_thread(),
it missed to invalidate dcc->f2fs_issue_discard, later kthread_stop() may
access invalid pointer.

Fixes: 4d67490498ac ("f2fs: Don't create discard thread when device doesn't support realtime discard")
Reported-by: syzbot+035a381ea1afb63f098d@syzkaller.appspotmail.com
Reported-by: syzbot+729c925c2d9fc495ddee@syzkaller.appspotmail.com
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

apparmor: Fix memleak in alloc_ns()

[ Upstream commit e9e6fa49dbab6d84c676666f3fe7d360497fd65b ]

After changes in commit a1bd627b46d1 ("apparmor: share profile name on
replacement"), the hname member of struct aa_policy is not valid slab
object, but a subset of that, it can not be freed by kfree_sensitive(),
use aa_policy_destroy() to fix it.

Fixes: a1bd627b46d1 ("apparmor: share profile name on replacement")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: rockchip - rework by using crypto_engine

[ Upstream commit 57d67c6e8219b2a034c16d6149e30fb40fd39935 ]

Instead of doing manual queue management, let's use the crypto/engine
for that.
In the same time, rework the requests handling to be easier to
understand (and fix all bugs related to them).

Fixes: ce0183cb6464b ("crypto: rockchip - switch to skcipher API")
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: rockchip - remove non-aligned handling

[ Upstream commit bb3c7b73363c9a149b12b74c44ae94b73a8fddf8 ]

Now driver have fallback for un-aligned cases, remove all code handling
those cases.

Fixes: ce0183cb6464b ("crypto: rockchip - switch to skcipher API")
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: rockchip - better handle cipher key

[ Upstream commit d6b23ccef82816050c2fd458c9dabfa0e0af09b9 ]

The key should not be set in hardware too much in advance, this will
fail it 2 TFM with different keys generate alternative requests.
The key should be stored and used just before doing cipher operations.

Fixes: ce0183cb6464b ("crypto: rockchip - switch to skcipher API")
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: rockchip - add fallback for ahash

[ Upstream commit 816600485cb597b3ff7d6806a95a78512839f775 ]

Adds a fallback for all case hardware cannot handle.

Fixes: ce0183cb6464b ("crypto: rockchip - switch to skcipher API")
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: rockchip - add fallback for cipher

[ Upstream commit 68ef8af09a1a912a5ed2cfaa4cca7606f52cef90 ]

The hardware does not handle 0 size length request, let's add a
fallback.
Furthermore fallback will be used for all unaligned case the hardware
cannot handle.

Fixes: ce0183cb6464b ("crypto: rockchip - switch to skcipher API")
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: rockchip - do not store mode globally

[ Upstream commit 87e356c4966444866186f68f05832fdcc0f351a3 ]

Storing the mode globally does not work if 2 requests are handled in the
same time.
We should store it in a request context.

Fixes: ce0183cb6464b ("crypto: rockchip - switch to skcipher API")
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: rockchip - do not do custom power management

[ Upstream commit c50ef1411c8cbad0c7db100c477126076b6e3348 ]

The clock enable/disable at tfm init/exit is fragile,
if 2 tfm are init in the same time and one is removed just after,
it will leave the hardware uncloked even if a user remains.

Instead simply enable clocks at probe time.
We will do PM later.

Fixes: ce0183cb6464b ("crypto: rockchip - switch to skcipher API")
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: Fix the race condition of resize flag between resizefs

[ Upstream commit 28fc4e9077ce59ab28c89c20dc6be5154473218f ]

Because the set/clear SBI_IS_RESIZEFS flag not between any locks,
In the following case:
  thread1 thread2
   ->ioctl(resizefs)
    ->set RESIZEFS flag  ->ioctl(resizefs)
    ...                      ->set RESIZEFS flag
    ->clear RESIZEFS flag
       ->resizefs stream
    # No RESIZEFS flag in the stream

Also before freeze_super, the resizefs not started, we should not set
the SBI_IS_RESIZEFS flag.

So move the set/clear SBI_IS_RESIZEFS flag between the cp_mutex and
gc_lock.

Fixes: b4b10061ef98 ("f2fs: refactor resize_fs to avoid meta updates in progress")
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: pci-epf-test: Register notifier if only core_init_notifier is enabled

[ Upstream commit 6acd25cc98ce0c9ee4fefdaf44fc8bca534b26e5 ]

The pci_epf_test_notifier function should be installed also if only
core_init_notifier is enabled. Fix the current logic.

Link: https://lore.kernel.org/r/20220825090101.20474-1-hayashi.kunihiko@socionext.com
Fixes: 5e50ee27d4a5 ("PCI: pci-epf-test: Add support to defer core initialization")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Om Prakash Singh <omp@nvidia.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/core: Fix order of nldev_exit call

[ Upstream commit 4508d32ccced24c972bc4592104513e1ff8439b5 ]

Create symmetrical exit flow by calling to nldev_exit() after
call to rdma_nl_unregister(RDMA_NL_LS).

Fixes: 6c80b41abe22 ("RDMA/netlink: Add nldev initialization flows")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/64e676774a53a406f4cde265d5a4cfd6b8e97df9.1666683334.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: dwc: Fix n_fts[] array overrun

[ Upstream commit 66110361281b2f7da0c8bd51eaf1f152f4236035 ]

commit aeaa0bfe89654 ("PCI: dwc: Move N_FTS setup to common setup")
incorrectly uses pci->link_gen in deriving the index to the
n_fts[] array also introducing the issue of accessing beyond the
boundaries of array for greater than Gen-2 speeds. This change fixes
that issue.

Link: https://lore.kernel.org/r/20220926111923.22487-1-vidyas@nvidia.com
Fixes: aeaa0bfe8965 ("PCI: dwc: Move N_FTS setup to common setup")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

apparmor: Use pointer to struct aa_label for lbs_cred

[ Upstream commit 37923d4321b1e38170086da2c117f78f2b0f49c6 ]

According to the implementations of cred_label() and set_cred_label(),
we should use pointer to struct aa_label for lbs_cred instead of struct
aa_task_ctx, this patch fixes it.

Fixes: bbd3662a8348 ("Infrastructure management of the cred security blob")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: core: Fix a race between scsi_done() and scsi_timeout()

[ Upstream commit 978b7922d3dca672b41bb4b8ce6c06ab77112741 ]

If there is a race between scsi_done() and scsi_timeout() and if
scsi_timeout() loses the race, scsi_timeout() should not reset the request
timer. Hence change the return value for this case from BLK_EH_RESET_TIMER
into BLK_EH_DONE.

Although the block layer holds a reference on a request (req->ref) while
calling a timeout handler, restarting the timer (blk_add_timer()) while a
request is being completed is racy.

Reviewed-by: Mike Christie <michael.christie@oracle.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Hannes Reinecke <hare@suse.de>
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 15f73f5b3e59 ("blk-mq: move failure injection out of blk_mq_complete_request")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221018202958.1902564-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: nitrox - avoid double free on error path in nitrox_sriov_init()

[ Upstream commit 094528b6a5a755b1195a01e10b13597d67d1a0e6 ]

If alloc_workqueue() fails in nitrox_mbox_init() it deallocates
ndev->iov.vfdev and returns error code, but then nitrox_sriov_init()
calls nitrox_sriov_cleanup() where ndev->iov.vfdev is deallocated
again.

Fix this by nulling ndev->iov.vfdev after the first deallocation.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 9e5de3e06e54 ("crypto: cavium/nitrox - Add mailbox...")
Signed-off-by: Natalia Petrova <n.petrova@fintech.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: sun8i-ss - use dma_addr instead u32

[ Upstream commit 839b8ae2fc10f205317bcc32c9de18456756e1f5 ]

The DMA address need to be stored in a dma_addr_t

Fixes: 359e893e8af4 ("crypto: sun8i-ss - rework handling of IV")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: hisilicon/qm - fix missing destroy qp_idr

[ Upstream commit 116be08f6e4e385733d42360a33c3d883d2dd702 ]

In the function hisi_qm_memory_init(), if resource alloc fails after
idr_init, the initialized qp_idr needs to be destroyed.

Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>