review.tizen.org Git - platform/kernel/linux-rpi.git/log

Merge tag 'char-misc-5.1-rc3' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
"Here are some binder, habanalabs, and vboxguest driver fixes for
  5.1-rc3.

  The Binder fixes resolve some reported issues found by testing, first
  by the selinux developers, and then earlier today by syzbot.

  The habanalabs fixes are all minor, resolving a number of tiny things.

  The vboxguest patches are a bit larger. They resolve the fact that
  virtual box decided to change their api in their latest release in a
  way that broke the existing kernel code, despite saying that they were
  never going to do that. So this is a bit of a "new feature", but is
  good to get merged so that 5.1 will work with the latest release. The
  changes are not large and of course virtual box "swears" they will not
  break this again, but no one is holding their breath here.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  virt: vbox: Implement passing requestor info to the host for VirtualBox 6.0.x
  binder: fix race between munmap() and direct reclaim
  binder: fix BUG_ON found by selinux-testsuite
  habanalabs: cast to expected type
  habanalabs: prevent host crash during suspend/resume
  habanalabs: perform accounting for active CS
  habanalabs: fix mapping with page size bigger than 4KB
  habanalabs: complete user context cleanup before hard reset
  habanalabs: fix bug when mapping very large memory area
  habanalabs: fix MMU number of pages calculation

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
"Thirteen fixes, seven of which are for IBM fibre channel and three
  additional for fairly serious bugs in drivers (qla2xxx, mpt3sas,
  aacraid).

  Of the three core fixes, the most significant is probably the missed
  run queue causing an indefinite hang. The others are fixing a
  potential use after free on device close and silencing an incorrect
  warning"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ibmvfc: Clean up transport events
  scsi: ibmvfc: Byte swap status and error codes when logging
  scsi: ibmvfc: Add failed PRLI to cmd_status lookup array
  scsi: ibmvfc: Remove "failed" from logged errors
  scsi: zfcp: reduce flood of fcrscn1 trace records on multi-element RSCN
  scsi: zfcp: fix scsi_eh host reset with port_forced ERP for non-NPIV FCP devices
  scsi: zfcp: fix rport unblock if deleted SCSI devices on Scsi_Host
  scsi: sd: Quiesce warning if device does not report optimal I/O size
  scsi: sd: Fix a race between closing an sd device and sd I/O
  scsi: core: Run queue when state is set to running after being blocked
  scsi: qla4xxx: fix a potential NULL pointer dereference
  scsi: aacraid: Insure we don't access PCIe space during AER/EEH
  scsi: mpt3sas: Fix kernel panic during expander reset

Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
"A new ID for the i801 driver and some Documentation fixes to make it
  easier for people to find the bindings (which is also a basis for
  further improvements in that area)"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: wmt: make bindings file name match the driver
  i2c: sun6i-p2wi: make bindings file name match the driver
  i2c: stu300: make bindings file name match the driver
  i2c: mt65xx: make bindings file name match the driver
  i2c: iop3xx: make bindings file name match the driver
  i2c: i801: Add support for Intel Comet Lake

Merge tag 'sound-5.1-rc3' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"The important fixes at this time are a couple fixes in ALSA core: a
  fix for PCM is about the OOB access in PCM OSS plugins that has been
  for long time, but hasn't hit so often until now just because we
  allocated a large buffer via vmalloc(), and surfaced more often after
  switching to kvmalloc(). Another fix is for a long-standing PCM
  problem wrt racy PM resume.

  Others are trivial nospec coverage and usual HD-audio quirks"

* tag 'sound-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek - Fix speakers on Acer Predator Helios 500 Ryzen laptops
  ALSA: pcm: Don't suspend stream in unrecoverable PCM state
  ALSA: hda/ca0132 - Simplify alt firmware loading code
  ALSA: pcm: Fix possible OOB access in PCM oss plugins
  ALSA: hda/realtek: Enable headset MIC of ASUS X430UN and X512DK with ALC256
  ALSA: hda/realtek: Enable headset mic of ASUS P5440FF with ALC256
  ALSA: hda/realtek: Enable ASUS X441MB and X705FD headset MIC with ALC256
  ALSA: hda/realtek - Add support for Acer Aspire E5-523G/ES1-432 headset mic
  ALSA: hda/realtek: Enable headset MIC of Acer Aspire Z24-890 with ALC286
  ALSA: seq: oss: Fix Spectre v1 vulnerability
  ALSA: rawmidi: Fix potential Spectre v1 vulnerability

Merge tag 'kbuild-fixes-v5.1' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

- Remove harmful -Oz option of Clang

- Get back the original behavior (no recursion for in-tree build) for
   GNU Make 4.x

- Some minor fixes for coccinelle patches

- Do not overwrite .gitignore in the output directory in case it is
   version-controlled

- Fix missed record-mcount bug for dynamic ftrace

- Fix endianness bug in modversions for relative CRC

- Cater to '^H' key code in Kconfig ncurses programs

* tag 'kbuild-fixes-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig/[mn]conf: handle backspace (^H) key
  kbuild: modversions: Fix relative CRC byte order interpretation
  scripts: coccinelle: Fix description of badty.cocci
  kbuild: strip whitespace in cmd_record_mcount findstring
  kbuild: do not overwrite .gitignore in output directory
  kbuild: skip parsing pre sub-make code for recursion
  coccinelle: put_device: reduce false positives
  kbuild: skip sub-make for in-tree build with GNU Make 4.x
  Revert "kbuild: use -Oz instead of -Os when using clang"

Merge tag 'for-linus-20190329' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
"Small set of fixes that should go into this series. This contains:

   - compat signal mask fix for io_uring (Arnd)

   - EAGAIN corner case for direct vs buffered writes for io_uring
     (Roman)

   - NVMe pull request from Christoph with various little fixes

   - sbitmap ws_active fix, which caused a perf regression for shared
     tags (me)

   - sbitmap bit ordering fix (Ming)

   - libata on-stack DMA fix (Raymond)"

* tag 'for-linus-20190329' of git://git.kernel.dk/linux-block:
  nvmet: fix error flow during ns enable
  nvmet: fix building bvec from sg list
  nvme-multipath: relax ANA state check
  nvme-tcp: fix an endianess miss-annotation
  libata: fix using DMA buffers on stack
  io_uring: offload write to async worker in case of -EAGAIN
  sbitmap: order READ/WRITE freed instance and setting clear bit
  blk-mq: fix sbitmap ws_active for shared tags
  io_uring: fix big-endian compat signal mask handling
  blk-mq: update comment for blk_mq_hctx_has_pending()
  blk-mq: use blk_mq_put_driver_tag() to put tag

Merge tag 'ceph-for-5.1-rc3' of git://github.com/ceph/ceph-client

Pull ceph fixes from Ilya Dryomov:
"A patch to avoid choking on multipage bvecs in the messenger and a
  small use-after-free fix"

* tag 'ceph-for-5.1-rc3' of git://github.com/ceph/ceph-client:
  ceph: fix use-after-free on symlink traversal
  libceph: fix breakage caused by multipage bvecs

Merge tag 'xfs-5.1-fixes-1' of git://git./fs/xfs/xfs-linux

Pull xfs fixes from Darrick Wong:
"Here are a few fixes for some corruption bugs and uninitialized
  variable problems. The few patches here have gone through a few days
  worth of fstest runs with no new problems observed.

  Changes since last update:

   - Fix a bunch of static checker complaints about uninitialized
     variables and insufficient range checks.

   - Avoid a crash when incore extent map data are corrupt.

   - Disallow FITRIM when we haven't recovered the log and know the
     metadata are stale.

   - Fix a data corruption when doing unaligned overlapping dio writes"

* tag 'xfs-5.1-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: serialize unaligned dio writes against all other dio writes
  xfs: prohibit fstrim in norecovery mode
  xfs: always init bma in xfs_bmapi_write
  xfs: fix btree scrub checking with regards to root-in-inode
  xfs: dabtree scrub needs to range-check level
  xfs: don't trip over uninitialized buffer on extent read of corrupted inode

Merge tag 'drm-fixes-2019-03-29' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"Weekly fixes roundup, nothing two serious, some usb device regressions
  are fixed, and i915 GVT has a bigger fix but otherwise not really much
  happening here.

  core:
   - fb bpp check regression fix
   - release/unplug fix
   - use after free fixes

  i915:
   - fix mmap range checks
   - fix gvt ppgtt mm LRU list access races
   - fix selftest error pointer check
   - fix a macro definition (pre-emptive for potential further backports)
   - fix one AML SKU ULX status

  amdgpu:
   - one variable refresh rate fix

  udl:
   - fix EDID reading

  tegra:
   - build/warning fixes

  meson:
   - cleanup path fixes
   - TMDS clock filter fix

  rockchip:
   - NV12 buffers and scalar fix"

* tag 'drm-fixes-2019-03-29' of git://anongit.freedesktop.org/drm/drm: (22 commits)
  drm/i915/icl: Fix VEBOX mismatch BUG_ON()
  drm/i915/selftests: Fix an IS_ERR() vs NULL check
  drm/i915: Mark AML 0x87CA as ULX
  drm/meson: fix TMDS clock filtering for DMT monitors
  drm/meson: Uninstall IRQ handler
  drm/meson: Fix invalid pointer in meson_drv_unbind()
  drm/udl: Refactor edid retrieving in UDL driver (v2)
  drm: Fix drm_release() and device unplug
  drm/fb: avoid setting 0 depth.
  drm/tegra: vic: Fix implicit function declaration warning
  drm/tegra: hub: Fix dereference before check
  drm/i915/icl: Fix the TRANS_DDI_FUNC_CTL2 bitfield macro
  drm/amd/display: Only allow VRR when vrefresh is within supported range
  drm/rockchip: vop: reset scale mode when win is disabled
  drm/vkms: fix use-after-free when drm_gem_handle_create() fails
  drm/vgem: fix use-after-free when drm_gem_handle_create() fails
  drm/i915/gvt: Add mutual lock for ppgtt mm LRU list
  drm/i915/gvt: Only assign ppgtt root at dispatch time
  drm/i915/gvt: Don't submit request for error workload dispatch
  drm/i915/gvt: stop scheduling workload when vgpu is inactive
  ...

kconfig/[mn]conf: handle backspace (^H) key

Backspace is not working on some terminal emulators which do not send the
key code defined by terminfo. Terminals either send '^H' (8) or '^?' (127).
But currently only '^?' is handled. Let's also handle '^H' for those
terminals.

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Merge tag 'drm-intel-fixes-2019-03-28' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v5.2-rc3:
- fix mmap range checks
- fix gvt ppgtt mm LRU list access races
- fix selftest error pointer check
- fix a macro definition (pre-emptive for potential further backports)
- fix one AML SKU ULX status

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87sgv6ao7a.fsf@intel.com

Merge branch 'drm-fixes-5.1' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

- One freesync/VRR fix.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190328033124.26009-1-alexander.deucher@amd.com

Merge tag 'pci-v5.1-fixes-1' of git://git./linux/kernel/git/helgaas/pci

Pull PCI fixes from Bjorn Helgaas:
"PCI fixes:

   - Clear level-triggered interrupts for the bandwidth notification
     supported added for v5.1 (Alexandru Gagniuc)

   - Clear bandwidth notification interrupts before enabling them (Lukas
     Wunner)

   - Report post-enumeration bandwidth changes only once for
     multi-function devices (Lukas Wunner)"

* tag 'pci-v5.1-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI/LINK: Deduplicate bandwidth reports for multi-function devices
  PCI/LINK: Clear bandwidth notification interrupt before enabling it
  PCI/LINK: Supply IRQ handler so level-triggered IRQs are acked

Merge branch 'nvme-5.1' of git://git.infradead.org/nvme into for-linus

Pull NVMe fixes from Christoph:

"A few accumulated small fixes:

- fix an endianess misannotation that sneaked in this merge window in
   nvme-tcp (me)
- fix nvme-loop to handle multi-page segments (Ming)
- fix error handling in the nvmet configfs code (Max)
- add a missing requeue point in the multipath code (Martin George)"

* 'nvme-5.1' of git://git.infradead.org/nvme:
  nvmet: fix error flow during ns enable
  nvmet: fix building bvec from sg list
  nvme-multipath: relax ANA state check
  nvme-tcp: fix an endianess miss-annotation

nvmet: fix error flow during ns enable

In case we fail to enable p2pmem on the current namespace, disable the
backing store device before exiting.

Cc: Stephen Bates <sbates@raithlin.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvmet: fix building bvec from sg list

There are two mistakes for building bvec from sg list for file
backed ns:

- use request data length to compute number of io vector, this way
doesn't consider sg->offset, and the result may be smaller than required
io vectors

- bvec->bv_len isn't capped by sg->length

This patch fixes this issue by building bvec from sg directly, given
the whole IO stack is ready for multi-page bvec.

Reported-by: Yi Zhang <yi.zhang@redhat.com>
Fixes: 3a85a5de29ea ("nvme-loop: add a NVMe loopback host driver")

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-multipath: relax ANA state check

When undergoing state transitions I/O might be requeued, hence
we should always call nvme_mpath_set_live() to schedule requeue_work
whenever the nvme device is live, independent on whether the
old state was live or not.

Signed-off-by: Martin George <marting@netapp.com>
Signed-off-by: Gargi Srinivas <sring@netapp.com>
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-tcp: fix an endianess miss-annotation

nvme_tcp_end_request just takes the status value and the converts
it to little endian as well as shifting for the phase bit.

Fixes: 43ce38a6d823 ("nvme-tcp: support C2HData with SUCCESS flag")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>

afs: Fix StoreData op marshalling

The marshalling of AFS.StoreData, AFS.StoreData64 and YFS.StoreData64 calls
generated by ->setattr() ops for the purpose of expanding a file is
incorrect due to older documentation incorrectly describing the way the RPC
'FileLength' parameter is meant to work.

The older documentation says that this is the length the file is meant to
end up at the end of the operation; however, it was never implemented this
way in any of the servers, but rather the file is truncated down to this
before the write operation is effected, and never expanded to it (and,
indeed, it was renamed to 'TruncPos' in 2014).

Fix this by setting the position parameter to the new file length and doing
a zero-lengh write there.

The bug causes Xwayland to SIGBUS due to unexpected non-expansion of a file
it then mmaps. This can be tested by giving the following test program a
filename in an AFS directory:

#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/mman.h>
int main(int argc, char *argv[])
{
char *p;
int fd;
if (argc != 2) {
fprintf(stderr,
"Format: test-trunc-mmap <file>\n");
exit(2);
}
fd = open(argv[1], O_RDWR | O_CREAT | O_TRUNC);
if (fd < 0) {
perror(argv[1]);
exit(1);
}
if (ftruncate(fd, 0x140008) == -1) {
perror("ftruncate");
exit(1);
}
p = mmap(NULL, 4096, PROT_READ | PROT_WRITE,
MAP_SHARED, fd, 0);
if (p == MAP_FAILED) {
perror("mmap");
exit(1);
}
p[0] = 'a';
if (munmap(p, 4096) < 0) {
perror("munmap");
exit(1);
}
if (close(fd) < 0) {
perror("close");
exit(1);
}
exit(0);
}

Fixes: 31143d5d515e ("AFS: implement basic file write support")
Reported-by: Jonathan Billings <jsbillin@umich.edu>
Tested-by: Jonathan Billings <jsbillin@umich.edu>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vfs: Update mount API docs

Update the mount API docs to reflect recent changes to the code.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 's390-5.1-2' of git://git./linux/kernel/git/s390/linux

Pull s390 fixes from Martin Schwidefsky:
"Improvements and bug fixes for 5.1-rc2:

   - Fix early free of the channel program in vfio

   - On AP device removal make sure that all messages are flushed with
     the driver still attached that queued the message

   - Limit brk randomization to 32MB to reduce the chance that the heap
     of ld.so is placed after the main stack

   - Add a rolling average for the steal time of a CPU, this will be
     needed for KVM to decide when to do busy waiting

   - Fix a warning in the CPU-MF code

   - Add a notification handler for AP configuration change to react
     faster to new AP devices"

* tag 's390-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/cpumf: Fix warning from check_processor_id
  zcrypt: handle AP Info notification from CHSC SEI command
  vfio: ccw: only free cp on final interrupt
  s390/vtime: steal time exponential moving average
  s390/zcrypt: revisit ap device remove procedure
  s390: limit brk randomization to 32MB

Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
"A couple of minor fixes only for now

   - fix for incorrect DMA channels on Renesas R-Car

   - Broadcom bcm2835 error handling fixes

   - Kconfig dependency fixes for bcm2835 and davinci

   - CPU idle wakeup fix for i.MX6

   - MMC regression on Tegra186

   - fix incorrect phy settings on one imx board"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  arm64: tegra: Disable CQE Support for SDMMC4 on Tegra186
  ARM: dts: nomadik: Fix polarity of SPI CS
  ARM: davinci: fix build failure with allnoconfig
  ARM: imx_v4_v5_defconfig: enable PWM driver
  ARM: imx_v6_v7_defconfig: continue compiling the pwm driver
  ARM: dts: imx6dl-yapp4: Use correct pseudo PHY address for the switch
  ARM: dts: imx6qdl: Fix typo in imx6qdl-icore-rqs.dtsi
  ARM: dts: imx6ull: Use the correct style for SPDX License Identifier
  ARM: dts: pfla02: increase phy reset duration
  ARM: imx6q: cpuidle: fix bug that CPU might not wake up at expected time
  ARM: imx51: fix a leaked reference by adding missing of_node_put
  ARM: dts: imx6dl-yapp4: Use rgmii-id phy mode on the cpu port
  arm64: bcm2835: Add missing dependency on MFD_CORE.
  ARM: dts: bcm283x: Fix hdmi hpd gpio pull
  soc: bcm: bcm2835-pm: Fix error paths of initialization.
  soc: bcm: bcm2835-pm: Fix PM_IMAGE_PERI power domain support.
  arm64: dts: renesas: r8a774c0: Fix SCIF5 DMA channels
  arm64: dts: renesas: r8a77990: Fix SCIF5 DMA channels

kbuild: modversions: Fix relative CRC byte order interpretation

Fix commit 56067812d5b0 ("kbuild: modversions: add infrastructure for
emitting relative CRCs") where CRCs are interpreted in host byte order
rather than proper kernel byte order. The bug is conditional on
CONFIG_MODULE_REL_CRCS.

For example, when loading a BE module into a BE kernel compiled with a LE
system, the error "disagrees about version of symbol module_layout" is
produced. A message such as "Found checksum D7FA6856 vs module 5668FAD7"
will be given with debug enabled, which indicates an obvious endian
problem within __kcrctab within the kernel image.

The general solution is to use the macro TO_NATIVE, as is done in
similar cases throughout modpost.c. With this correction it has been
verified that a BE kernel compiled with a LE system accepts BE modules.

This change has also been verified with a LE kernel compiled with a LE
system, in which case TO_NATIVE returns its value unmodified since the
byte orders match. This is by far the common case.

Fixes: 56067812d5b0 ("kbuild: modversions: add infrastructure for emitting relative CRCs")
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Cc: stable@vger.kernel.org
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

scripts: coccinelle: Fix description of badty.cocci

Summary was copy and pasted from array_size.cocci.

Signed-off-by: Michael Stefaniuc <mstefani@mykolab.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

kbuild: strip whitespace in cmd_record_mcount findstring

CC_FLAGS_FTRACE may contain trailing whitespace that interferes with
findstring.

For example, commit 6977f95e63b9 ("powerpc: avoid -mno-sched-epilog on
GCC 4.9 and newer") introduced a change such that on my ppc64le box,
CC_FLAGS_FTRACE="-pg -mprofile-kernel ".  (Note the trailing space.)
When cmd_record_mcount is now invoked, findstring fails as the ftrace
flags were found at very end of _c_flags, without the trailing space.

  _c_flags=" ... -pg -mprofile-kernel"
  CC_FLAGS_FTRACE="-pg -mprofile-kernel "
                                       ^
    findstring is looking for this extra space

Remove the redundant whitespaces from CC_FLAGS_FTRACE in
cmd_record_mcount to avoid this problem.

[masahiro.yamada: This issue only happens in the released versions
of GNU Make. CC_FLAGS_FTRACE will not contain the trailing space if
you use the latest GNU Make, which contains commit b90fabc8d6f3
("* NEWS: Do not insert a space during '+=' if the value is empty.") ]

Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com> (refactoring)
Fixes: 6977f95e63b9 ("powerpc: avoid -mno-sched-epilog on GCC 4.9 and newer").
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

kbuild: do not overwrite .gitignore in output directory

Commit 3a51ff344204 ("kbuild: gitignore output directory") seemed to
bother people who version-control output directories.

Andre Przywara says:
"Unfortunately this breaks my setup, because I keep a totally separate
git repository in my build directories to track (various versions of)
.config. So .gitignore there is carefully crafted to ignore most build
artefacts, but not .config, for instance."

Link: https://lkml.org/lkml/2019/3/22/1819
Reported-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>

kbuild: skip parsing pre sub-make code for recursion

When Make recurses to the top Makefile with sub-make-done unset,
the code block surrounded by 'ifneq ($(sub-make-done),1) ... endif'
is parsed multiple times. This happens for in-tree building of
include/config/auto.conf, *-pkg, etc. with GNU Make 4.x.

This is a slight regression by commit 688931a5ad4e ("kbuild: skip
sub-make for in-tree build with GNU Make 4.x") in terms of performance
since that code block contains one $(shell ...) invocation.

Fix it by exporting the variable irrespective of sub-make being run.
I renamed it because GNU Make cannot properly export variables
containing hyphens. This is probably a bug of GNU Make, and the issue
in Kbuild had already been reported by commit 2bfbe7881ee0 ("kbuild:
Do not use hyphen in exported variable name").

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

coccinelle: put_device: reduce false positives

Don't complain about a return when this function returns "&pdev->dev".

Fixes: da9cfb87a44d ("coccinelle: semantic code search for missing put_device()")
Reported-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

libata: fix using DMA buffers on stack

When CONFIG_VMAP_STACK=y, __pa() returns incorrect physical address for
a stack virtual address. Stack DMA buffers must be avoided.

Signed-off-by: raymond pang <raymondpangxd@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drm/i915/icl: Fix VEBOX mismatch BUG_ON()

GT VEBOX DISABLE is only 4 bits wide but it was using a 8 bits wide
mask, the remaning reserved bits is set to 0 causing 4 more
nonexistent VEBOX engines being detected as enabled, triggering the
BUG_ON() because of mismatch between vebox_mask and newly added
VEBOX_MASK().

[   64.081621] [drm:intel_device_info_init_mmio [i915]] vdbox enable: 0005, instances: 0005
[   64.081763] [drm:intel_device_info_init_mmio [i915]] vebox enable: 00f1, instances: 0001
[   64.081825] intel_device_info_init_mmio:925 GEM_BUG_ON(vebox_mask != ({ unsigned int first__ = (VECS0); unsigned int count__ = (2); ((&(dev_priv)->__info)->engine_mask & (((~0UL) - (1UL << (first__)) + 1) & (~0UL >> (64 - 1 - (first__ + count__ - 1))))) >> first__; }))
[   64.082047] ------------[ cut here ]------------
[   64.082054] kernel BUG at drivers/gpu/drm/i915/intel_device_info.c:925!

BSpec: 20680
Fixes: 26376a7e74d2 ("drm/i915/icl: Check for fused-off VDBOX and VEBOX instances")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326230223.26336-1-jose.souza@intel.com
(cherry picked from commit 547fcf9b1c608cf5c43c156a8773a94c6a38dc44)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

s390/cpumf: Fix warning from check_processor_id

Function __hw_perf_event_init() used a CPU variable without
ensuring CPU preemption has been disabled. This caused the
following warning in the kernel log:

  [ 7.277085] BUG: using smp_processor_id() in preemptible
                 [00000000] code: cf-csdiag/1892
  [ 7.277111] caller is cf_diag_event_init+0x13a/0x338
  [ 7.277122] CPU: 10 PID: 1892 Comm: cf-csdiag Not tainted
                 5.0.0-20190318.rc0.git0.9e1a11e0f602.300.fc29.s390x+debug #1
  [ 7.277131] Hardware name: IBM 2964 NC9 712 (LPAR)
  [ 7.277139] Call Trace:
  [ 7.277150] ([<000000000011385a>] show_stack+0x82/0xd0)
  [ 7.277161]  [<0000000000b7a71a>] dump_stack+0x92/0xd0
  [ 7.277174]  [<00000000007b7e9c>] check_preemption_disabled+0xe4/0x100
  [ 7.277183]  [<00000000001228aa>] cf_diag_event_init+0x13a/0x338
  [ 7.277195]  [<00000000002cf3aa>] perf_try_init_event+0x72/0xf0
  [ 7.277204]  [<00000000002d0bba>] perf_event_alloc+0x6fa/0xce0
  [ 7.277214]  [<00000000002dc4a8>] __s390x_sys_perf_event_open+0x398/0xd50
  [ 7.277224]  [<0000000000b9e8f0>] system_call+0xdc/0x2d8
  [ 7.277233] 2 locks held by cf-csdiag/1892:
  [ 7.277241]  #0: 00000000976f5510 (&sig->cred_guard_mutex){+.+.},
                  at: __s390x_sys_perf_event_open+0xd2e/0xd50
  [ 7.277257]  #1: 00000000363b11bd (&pmus_srcu){....},
                  at: perf_event_alloc+0x52e/0xce0

The variable is now accessed in proper context. Use
get_cpu_var()/put_cpu_var() pair to disable
preemption during access.
As the hardware authorization settings apply to all CPUs, it
does not matter which CPU is used to check the authorization setting.

Remove the event->count assignment. It is not needed as function
perf_event_alloc() allocates memory for the event with kzalloc() and
thus count is already set to zero.

Fixes: fe5908bccc56 ("s390/cpum_cf_diag: Add support for s390 counter facility diagnostic trace")

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

scsi: ibmvfc: Clean up transport events

No change to functionality. Simply make transport event messages a little
clearer, and rework CRQ format enums such that we have separate enums for
INIT messages and XPORT events.

[mkp: typo]

Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ibmvfc: Byte swap status and error codes when logging

Status and error codes are returned in big endian from the VIOS. The values
are translated into a human readable format when logged, but the values are
also logged. This patch byte swaps those values so that they are consistent
between BE and LE platforms.

Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ibmvfc: Add failed PRLI to cmd_status lookup array

The VIOS uses the SCSI_ERROR class to report PRLI failures. These errors
are indicated with the combination of a IBMVFC_FC_SCSI_ERROR return status
and 0x8000 error code. Add these codes to cmd_status[] with appropriate
human readable error message.

Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ibmvfc: Remove "failed" from logged errors

The text of messages logged with ibmvfc_log_error() always contain the term
"failed". In the case of cancelled commands during EH they are reported
back by the VIOS using error codes. This can be confusing to somebody
looking at these log messages as to whether a command was successfully
cancelled. The following real log message for example it is unclear if the
transaction was actaully cancelled.

<6>sd 0:0:1:1: Cancelling outstanding commands.
<3>sd 0:0:1:1: [sde] Command (28) failed: transaction cancelled (2:6) flags: 0 fcp_rsp: 0, resid=0, scsi_status: 0

Remove prefixing of "failed" to all error logged messages. The
ibmvfc_log_error() function translates the returned error/status codes to a
human readable message already.

Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: zfcp: reduce flood of fcrscn1 trace records on multi-element RSCN

If an incoming ELS of type RSCN contains more than one element, zfcp
suboptimally causes repeated erp trigger NOP trace records for each
previously failed port. These could be ports that went away.  It loops over
each RSCN element, and for each of those in an inner loop over all
zfcp_ports.

The trigger to recover failed ports should be just the reception of some
RSCN, no matter how many elements it has. So we can loop over failed ports
separately, and only then loop over each RSCN element to handle the
non-failed ports.

The call chain was:

  zfcp_fc_incoming_rscn
    for (i = 1; i < no_entries; i++)
      _zfcp_fc_incoming_rscn
        list_for_each_entry(port, &adapter->port_list, list)
          if (masked port->d_id match) zfcp_fc_test_link
          if (!port->d_id) zfcp_erp_port_reopen "fcrscn1"   <===

In order the reduce the "flooding" of the REC trace area in such cases, we
factor out handling the failed ports to be outside of the entries loop:

  zfcp_fc_incoming_rscn
    if (no_entries > 1)                                     <===
      list_for_each_entry(port, &adapter->port_list, list)  <===
        if (!port->d_id) zfcp_erp_port_reopen "fcrscn1"     <===
    for (i = 1; i < no_entries; i++)
      _zfcp_fc_incoming_rscn
        list_for_each_entry(port, &adapter->port_list, list)
          if (masked port->d_id match) zfcp_fc_test_link

Abbreviated example trace records before this code change:

Tag            : fcrscn1
WWPN           : 0x500507630310d327
ERP want       : 0x02
ERP need       : 0x02

Tag            : fcrscn1
WWPN           : 0x500507630310d327
ERP want       : 0x02
ERP need       : 0x00                 NOP => superfluous trace record

The last trace entry repeats if there are more than 2 RSCN elements.

Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: zfcp: fix scsi_eh host reset with port_forced ERP for non-NPIV FCP devices

Suppose more than one non-NPIV FCP device is active on the same channel.
Send I/O to storage and have some of the pending I/O run into a SCSI
command timeout, e.g. due to bit errors on the fibre. Now the error
situation stops. However, we saw FCP requests continue to timeout in the
channel. The abort will be successful, but the subsequent TUR fails.
Scsi_eh starts. The LUN reset fails. The target reset fails. The host
reset only did an FCP device recovery. However, for non-NPIV FCP devices,
this does not close and reopen ports on the SAN-side if other non-NPIV FCP
device(s) share the same open ports.

In order to resolve the continuing FCP request timeouts, we need to
explicitly close and reopen ports on the SAN-side.

This was missing since the beginning of zfcp in v2.6.0 history commit
ea127f975424 ("[PATCH] s390 (7/7): zfcp host adapter.").

Note: The FSF requests for forced port reopen could run into FSF request
timeouts due to other reasons. This would trigger an internal FCP device
recovery. Pending forced port reopen recoveries would get dismissed. So
some ports might not get fully reopened during this host reset handler.
However, subsequent I/O would trigger the above described escalation and
eventually all ports would be forced reopen to resolve any continuing FCP
request timeouts due to earlier bit errors.

Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: <stable@vger.kernel.org> #3.0+
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: zfcp: fix rport unblock if deleted SCSI devices on Scsi_Host

An already deleted SCSI device can exist on the Scsi_Host and remain there
because something still holds a reference.  A new SCSI device with the same
H:C:T:L and FCP device, target port WWPN, and FCP LUN can be created.  When
we try to unblock an rport, we still find the deleted SCSI device and
return early because the zfcp_scsi_dev of that SCSI device is not
ZFCP_STATUS_COMMON_UNBLOCKED. Hence we miss to unblock the rport, even if
the new proper SCSI device would be in good state.

Therefore, skip deleted SCSI devices when iterating the sdevs of the shost.
[cf. __scsi_device_lookup{_by_target}() or scsi_device_get()]

The following abbreviated trace sequence can indicate such problem:

Area           : REC
Tag            : ersfs_3
LUN            : 0x4045400300000000
WWPN           : 0x50050763031bd327
LUN status     : 0x40000000     not ZFCP_STATUS_COMMON_UNBLOCKED
Ready count    : n not incremented yet
Running count  : 0x00000000
ERP want       : 0x01
ERP need       : 0xc1 ZFCP_ERP_ACTION_NONE

Area           : REC
Tag            : ersfs_3
LUN            : 0x4045400300000000
WWPN           : 0x50050763031bd327
LUN status     : 0x41000000
Ready count    : n+1
Running count  : 0x00000000
ERP want       : 0x01
ERP need       : 0x01

...

Area           : REC
Level          : 4 only with increased trace level
Tag            : ertru_l
LUN            : 0x4045400300000000
WWPN           : 0x50050763031bd327
LUN status     : 0x40000000
Request ID     : 0x0000000000000000
ERP status     : 0x01800000
ERP step       : 0x1000
ERP action     : 0x01
ERP count      : 0x00

NOT followed by a trace record with tag "scpaddy"
for WWPN 0x50050763031bd327.

Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Fixes: 6f2ce1c6af37 ("scsi: zfcp: fix rport unblock race with LUN recovery")
Cc: <stable@vger.kernel.org> #2.6.32+
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: sd: Quiesce warning if device does not report optimal I/O size

Commit a83da8a4509d ("scsi: sd: Optimal I/O size should be a multiple
of physical block size") split one conditional into several separate
statements in an effort to provide more accurate warning messages when
a device reports a nonsensical value. However, this reorganization
accidentally dropped the precondition of the reported value being
larger than zero. This lead to a warning getting emitted on devices
that do not report an optimal I/O size at all.

Remain silent if a device does not report an optimal I/O size.

Fixes: a83da8a4509d ("scsi: sd: Optimal I/O size should be a multiple of physical block size")
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: <stable@vger.kernel.org>
Reported-by: Hussam Al-Tayeb <ht990332@gmx.com>
Tested-by: Hussam Al-Tayeb <ht990332@gmx.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: sd: Fix a race between closing an sd device and sd I/O

The scsi_end_request() function calls scsi_cmd_to_driver() indirectly and
hence needs the disk->private_data pointer. Avoid that that pointer is
cleared before all affected I/O requests have finished. This patch avoids
that the following crash occurs:

Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Call trace:
scsi_mq_uninit_cmd+0x1c/0x30
scsi_end_request+0x7c/0x1b8
scsi_io_completion+0x464/0x668
scsi_finish_command+0xbc/0x160
scsi_eh_flush_done_q+0x10c/0x170
sas_scsi_recover_host+0x84c/0xa98 [libsas]
scsi_error_handler+0x140/0x5b0
kthread+0x100/0x12c
ret_from_fork+0x10/0x18

Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Jason Yan <yanaijie@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reported-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: Run queue when state is set to running after being blocked

Use dd to test a SCSI device:

  1. echo "blocked" >/sys/block/sda/device/state
  2. dd if=/dev/sda of=/mnt/t.log bs=1M count=10
  3. echo "running" >/sys/block/sda/device/state

dd should finish this work after step 3, but it hangs.

After step2, the call chain is this:

blk_mq_dispatch_rq_list-->scsi_queue_rq-->prep_to_mq

prep_to_mq will return BLK_STS_RESOURCE, and scsi_queue_rq will
transition it to BLK_STS_DEV_RESOURCE which means that driver can
guarantee that IO dispatch will be triggered in future when the
resource is available.  Need to follow the rule if we set the device
state to running.

[mkp: tweaked commit description and code comment as suggested by Bart]

Signed-off-by: zhengbin <zhengbin13@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:
"Fixes here and there, a couple new device IDs, as usual:

   1) Fix BQL race in dpaa2-eth driver, from Ioana Ciornei.

   2) Fix 64-bit division in iwlwifi, from Arnd Bergmann.

   3) Fix documentation for some eBPF helpers, from Quentin Monnet.

   4) Some UAPI bpf header sync with tools, also from Quentin Monnet.

   5) Set descriptor ownership bit at the right time for jumbo frames in
      stmmac driver, from Aaro Koskinen.

   6) Set IFF_UP properly in tun driver, from Eric Dumazet.

   7) Fix load/store doubleword instruction generation in powerpc eBPF
      JIT, from Naveen N. Rao.

   8) nla_nest_start() return value checks all over, from Kangjie Lu.

   9) Fix asoc_id handling in SCTP after the SCTP_*_ASSOC changes this
      merge window. From Marcelo Ricardo Leitner and Xin Long.

  10) Fix memory corruption with large MTUs in stmmac, from Aaro
      Koskinen.

  11) Do not use ipv4 header for ipv6 flows in TCP and DCCP, from Eric
      Dumazet.

  12) Fix topology subscription cancellation in tipc, from Erik Hugne.

  13) Memory leak in genetlink error path, from Yue Haibing.

  14) Valid control actions properly in packet scheduler, from Davide
      Caratti.

  15) Even if we get EEXIST, we still need to rehash if a shrink was
      delayed. From Herbert Xu.

  16) Fix interrupt mask handling in interrupt handler of r8169, from
      Heiner Kallweit.

  17) Fix leak in ehea driver, from Wen Yang"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (168 commits)
  dpaa2-eth: fix race condition with bql frame accounting
  chelsio: use BUG() instead of BUG_ON(1)
  net: devlink: skip info_get op call if it is not defined in dumpit
  net: phy: bcm54xx: Encode link speed and activity into LEDs
  tipc: change to check tipc_own_id to return in tipc_net_stop
  net: usb: aqc111: Extend HWID table by QNAP device
  net: sched: Kconfig: update reference link for PIE
  net: dsa: qca8k: extend slave-bus implementations
  net: dsa: qca8k: remove leftover phy accessors
  dt-bindings: net: dsa: qca8k: support internal mdio-bus
  dt-bindings: net: dsa: qca8k: fix example
  net: phy: don't clear BMCR in genphy_soft_reset
  bpf, libbpf: clarify bump in libbpf version info
  bpf, libbpf: fix version info and add it to shared object
  rxrpc: avoid clang -Wuninitialized warning
  tipc: tipc clang warning
  net: sched: fix cleanup NULL pointer exception in act_mirr
  r8169: fix cable re-plugging issue
  net: ethernet: ti: fix possible object reference leak
  net: ibm: fix possible object reference leak
  ...

ceph: fix use-after-free on symlink traversal

free the symlink body after the same RCU delay we have for freeing the
struct inode itself, so that traversal during RCU pathwalk wouldn't step
into freed memory.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

virt: vbox: Implement passing requestor info to the host for VirtualBox 6.0.x

VirtualBox 6.0.x has a new feature where the guest kernel driver passes
info about the origin of the request (e.g. userspace or kernelspace) to
the hypervisor.

If we do not pass this information then when running the 6.0.x userspace
guest-additions tools on a 6.0.x host, some requests will get denied
with a VERR_VERSION_MISMATCH error, breaking vboxservice.service and
the mounting of shared folders marked to be auto-mounted.

This commit implements passing the requestor info to the host, fixing this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: wmt: make bindings file name match the driver

If we use the "i2c-" prefix for the binding documentation file name,
then it should match the file name of the driver, if possible. It is
possible for this driver, so rename it.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

i2c: sun6i-p2wi: make bindings file name match the driver

If we use the "i2c-" prefix for the binding documentation file name,
then it should match the file name of the driver, if possible. It is
possible for this driver, so rename it.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>

i2c: stu300: make bindings file name match the driver

If we use the "i2c-" prefix for the binding documentation file name,
then it should match the file name of the driver, if possible. It is
possible for this driver, so rename it.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

i2c: mt65xx: make bindings file name match the driver

If we use the "i2c-" prefix for the binding documentation file name,
then it should match the file name of the driver, if possible. It is
possible for this driver, so rename it.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

i2c: iop3xx: make bindings file name match the driver

If we use the "i2c-" prefix for the binding documentation file name,
then it should match the file name of the driver, if possible. It is
possible for this driver, so rename it.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

drm/i915/selftests: Fix an IS_ERR() vs NULL check

The live_context() function returns error pointers. It never returns
NULL.

Fixes: 9c1477e83e62 ("drm/i915/selftests: Exercise adding requests to a full GGTT")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326050843.GA20038@kadam
(cherry picked from commit 602cbe8efc523ba56e1f41e8f74c7aa835672593)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge tag 'nfs-for-5.1-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:

  Stable fixes:
   - Fix nfs4_lock_state refcounting in nfs4_alloc_{lock,unlock}data()
   - fix mount/umount race in nlmclnt.
   - NFSv4.1 don't free interrupted slot on open

  Bugfixes:
   - Don't let RPC_SOFTCONN tasks time out if the transport is connected
   - Fix a typo in nfs_init_timeout_values()
   - Fix layoutstats handling during read failovers
   - fix uninitialized variable warning"

* tag 'nfs-for-5.1-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  SUNRPC: fix uninitialized variable warning
  pNFS/flexfiles: Fix layoutstats handling during read failovers
  NFS: Fix a typo in nfs_init_timeout_values()
  SUNRPC: Don't let RPC_SOFTCONN tasks time out if the transport is connected
  NFSv4.1 don't free interrupted slot on open
  NFS: fix mount/umount race in nlmclnt.
  NFS: Fix nfs4_lock_state refcounting in nfs4_alloc_{lock,unlock}data()

SUNRPC: fix uninitialized variable warning

Avoid following compiler warning on uninitialized variable

net/sunrpc/xprtsock.c: In function ‘xs_read_stream_request.constprop’:
net/sunrpc/xprtsock.c:525:10: warning: ‘read’ may be used uninitialized in this function [-Wmaybe-uninitialized]
   return read;
          ^~~~
net/sunrpc/xprtsock.c:529:23: warning: ‘ret’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  return ret < 0 ? ret : read;
         ~~~~~~~~~~~~~~^~~~~~

Signed-off-by: Alakesh Haloi <alakesh.haloi@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

dpaa2-eth: fix race condition with bql frame accounting

It might happen that Tx conf acknowledges a frame before it was
subscribed in bql, as subscribing was previously done after the enqueue
operation.

This patch moves the netdev_tx_sent_queue call before the actual frame
enqueue, so that this can never happen.

Fixes: 569dac6a5a0d ("dpaa2-eth: bql support")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

chelsio: use BUG() instead of BUG_ON(1)

clang warns about possible bugs in a dead code branch after
BUG_ON(1) when CONFIG_PROFILE_ALL_BRANCHES is enabled:

drivers/net/ethernet/chelsio/cxgb4/sge.c:479:3: error: variable 'buf_size' is used uninitialized whenever 'if'
      condition is false [-Werror,-Wsometimes-uninitialized]
                BUG_ON(1);
                ^~~~~~~~~
include/asm-generic/bug.h:61:36: note: expanded from macro 'BUG_ON'
#define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0)
                                   ^~~~~~~~~~~~~~~~~~~
include/linux/compiler.h:48:23: note: expanded from macro 'unlikely'
#  define unlikely(x)   (__branch_check__(x, 0, __builtin_constant_p(x)))
                        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/chelsio/cxgb4/sge.c:482:9: note: uninitialized use occurs here
        return buf_size;
               ^~~~~~~~
drivers/net/ethernet/chelsio/cxgb4/sge.c:479:3: note: remove the 'if' if its condition is always true
                BUG_ON(1);
                ^
include/asm-generic/bug.h:61:32: note: expanded from macro 'BUG_ON'
#define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0)
                               ^
drivers/net/ethernet/chelsio/cxgb4/sge.c:459:14: note: initialize the variable 'buf_size' to silence this warning
        int buf_size;
                    ^
                     = 0

Use BUG() here to create simpler code that clang understands
correctly.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: devlink: skip info_get op call if it is not defined in dumpit

In dumpit, unlike doit, the check for info_get op being defined
is missing. Add it and avoid null pointer dereference in case driver
does not define this op.

Fixes: f9cf22882c60 ("devlink: add device information API")
Reported-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: bcm54xx: Encode link speed and activity into LEDs

Previously the green and amber LEDs on this quad PHY were solid, to
indicate an encoding of the link speed (10/100/1000).

This keeps the LEDs always on just as before, but now they flash on
Rx/Tx activity.

Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: change to check tipc_own_id to return in tipc_net_stop

When running a syz script, a panic occurred:

[  156.088228] BUG: KASAN: use-after-free in tipc_disc_timeout+0x9c9/0xb20 [tipc]
[  156.094315] Call Trace:
[  156.094844]  <IRQ>
[  156.095306]  dump_stack+0x7c/0xc0
[  156.097346]  print_address_description+0x65/0x22e
[  156.100445]  kasan_report.cold.3+0x37/0x7a
[  156.102402]  tipc_disc_timeout+0x9c9/0xb20 [tipc]
[  156.106517]  call_timer_fn+0x19a/0x610
[  156.112749]  run_timer_softirq+0xb51/0x1090

It was caused by the netns freed without deleting the discoverer timer,
while later on the netns would be accessed in the timer handler.

The timer should have been deleted by tipc_net_stop() when cleaning up a
netns. However, tipc has been able to enable a bearer and start d->timer
without the local node_addr set since Commit 52dfae5c85a4 ("tipc: obtain
node identity from interface by default"), which caused the timer not to
be deleted in tipc_net_stop() then.

So fix it in tipc_net_stop() by changing to check local node_id instead
of local node_addr, as Jon suggested.

While at it, remove the calling of tipc_nametbl_withdraw() there, since
tipc_nametbl_stop() will take of the nametbl's freeing after.

Fixes: 52dfae5c85a4 ("tipc: obtain node identity from interface by default")
Reported-by: syzbot+a25307ad099309f1c2b9@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: usb: aqc111: Extend HWID table by QNAP device

New device of QNAP based on aqc111u
Add this ID to blacklist of cdc_ether driver as well

Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sched: Kconfig: update reference link for PIE

RFC 8033 replaces the IETF draft for PIE

Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: qca8k: extend slave-bus implementations

This patch implements accessors for the QCA8337 MDIO access
through the MDIO_MASTER register, which makes it possible to
access the PHYs on slave-bus through the switch. In cases
where the switch ports are already mapped via external
"phy-phandles", the internal mdio-bus is disabled in order to
prevent a duplicated discovery and enumeration of the same
PHYs. Don't use mixed external and internal mdio-bus
configurations, as this is not supported by the hardware.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: qca8k: remove leftover phy accessors

This belated patch implements Andrew Lunn's request of
"remove the phy_read() and phy_write() functions."
<https://lore.kernel.org/patchwork/comment/902734/>

While seemingly harmless, this causes the switch's user
port PHYs to get registered twice. This is because the
DSA subsystem will create a slave mdio-bus not knowing
that the qca8k_phy_(read|write) accessors operate on
the external mdio-bus. So the same "bus" gets effectively
duplicated.

Cc: stable@vger.kernel.org
Fixes: 6b93fb46480a ("net-next: dsa: add new driver for qca8xxx family")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dt-bindings: net: dsa: qca8k: support internal mdio-bus

This patch updates the qca8k's binding to document to the
approach for using the internal mdio-bus of the supported
qca8k switches.

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dt-bindings: net: dsa: qca8k: fix example

In the example, the phy at phy@0 is clashing with
the switch0@0 at the same address. Usually, the switches
are accessible through pseudo PHYs which in case of the
qca8k are located at 0x10 - 0x18.

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'for-5.1-rc2-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:

- fsync fixes: i_size for truncate vs fsync, dio vs buffered during
   snapshotting, remove complicated but incomplete assertion

- removed excessive warnigs, misreported device stats updates

- fix raid56 page mapping for 32bit arch

- fixes reported by static analyzer

* tag 'for-5.1-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Btrfs: fix assertion failure on fsync with NO_HOLES enabled
  btrfs: Avoid possible qgroup_rsv_size overflow in btrfs_calculate_inode_block_rsv_size
  btrfs: Fix bound checking in qgroup_trace_new_subtree_blocks
  btrfs: raid56: properly unmap parity page in finish_parity_scrub()
  btrfs: don't report readahead errors and don't update statistics
  Btrfs: fix file corruption after snapshotting due to mix of buffered/DIO writes
  btrfs: remove WARN_ON in log_dir_items
  Btrfs: fix incorrect file size after shrinking truncate and fsync

Merge tag 'trace-v5.1-rc2' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
"Three small fixes:

   - A fix to a double free in the histogram code

   - Uninitialized variable fix

   - Use NULL instead of zero fix and spelling fixes"

* tag 'trace-v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftrace: Fix warning using plain integer as NULL & spelling corrections
  tracing: initialize variable in create_dyn_event()
  tracing: Remove unnecessary var_ref destroy in track_data_destroy()

Merge tag 'locks-v5.1' of git://git./linux/kernel/git/jlayton/linux

Pull file locking bugfix from Jeff Layton:
"Just a single fix for a bug that crept into POSIX lock deadlock
detection in v5.0"

* tag 'locks-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
locks: wake any locks blocked on request before deadlock check

ALSA: hda/realtek - Fix speakers on Acer Predator Helios 500 Ryzen laptops

On an Acer Predator Helios 500 (Ryzen version), the laptop's speakers
don't work out of the box.

The problem can be worked around with hdajackretask, remapping the
"Black Headphone, Right side" pin (0x21) to the Internal speaker.

This patch adds a quirk to change this mapping by default.

[ corrected ALC299_FIXUP_PREDATOR_SPK definition and adapted for the
latest tree by tiwai ]

Signed-off-by: Bernhard Rosenkraenzer <bero@lindev.ch>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

xfs: serialize unaligned dio writes against all other dio writes

XFS applies more strict serialization constraints to unaligned
direct writes to accommodate things like direct I/O layer zeroing,
unwritten extent conversion, etc. Unaligned submissions acquire the
exclusive iolock and wait for in-flight dio to complete to ensure
multiple submissions do not race on the same block and cause data
corruption.

This generally works in the case of an aligned dio followed by an
unaligned dio, but the serialization is lost if I/Os occur in the
opposite order. If an unaligned write is submitted first and
immediately followed by an overlapping, aligned write, the latter
submits without the typical unaligned serialization barriers because
there is no indication of an unaligned dio still in-flight. This can
lead to unpredictable results.

To provide proper unaligned dio serialization, require that such
direct writes are always the only dio allowed in-flight at one time
for a particular inode. We already acquire the exclusive iolock and
drain pending dio before submitting the unaligned dio. Wait once
more after the dio submission to hold the iolock across the I/O and
prevent further submissions until the unaligned I/O completes. This
is heavy handed, but consistent with the current pre-submission
serialization for unaligned direct writes.

Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

ftrace: Fix warning using plain integer as NULL & spelling corrections

Changed 0 --> NULL to avoid sparse warning
Corrected spelling mistakes reported by checkpatch.pl
Sparse warning below:

sudo make C=2 CF=-D__CHECK_ENDIAN__ M=kernel/trace

CHECK kernel/trace/ftrace.c
kernel/trace/ftrace.c:3007:24: warning: Using plain integer as NULL pointer
kernel/trace/ftrace.c:4758:37: warning: Using plain integer as NULL pointer

Link: http://lkml.kernel.org/r/20190323183523.GA2244@hari-Inspiron-1545
Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

tracing: initialize variable in create_dyn_event()

Fix compile warning in create_dyn_event(): 'ret' may be used uninitialized
in this function [-Wuninitialized].

Link: http://lkml.kernel.org/r/1553237900-8555-1-git-send-email-frowand.list@gmail.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Fixes: 5448d44c3855 ("tracing: Add unified dynamic event framework")
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

tracing: Remove unnecessary var_ref destroy in track_data_destroy()

Commit 656fe2ba85e8 (tracing: Use hist trigger's var_ref array to
destroy var_refs) centralized the destruction of all the var_refs
in one place so that other code didn't have to do it.

The track_data_destroy() added later ignored that and also destroyed
the track_data var_ref, causing a double-free error flagged by KASAN.

==================================================================
BUG: KASAN: use-after-free in destroy_hist_field+0x30/0x70
Read of size 8 at addr ffff888086df2210 by task bash/1694

CPU: 6 PID: 1694 Comm: bash Not tainted 5.1.0-rc1-test+ #15
Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03
07/14/2016
Call Trace:
dump_stack+0x71/0xa0
? destroy_hist_field+0x30/0x70
print_address_description.cold.3+0x9/0x1fb
? destroy_hist_field+0x30/0x70
? destroy_hist_field+0x30/0x70
kasan_report.cold.4+0x1a/0x33
? __kasan_slab_free+0x100/0x150
? destroy_hist_field+0x30/0x70
destroy_hist_field+0x30/0x70
track_data_destroy+0x55/0xe0
destroy_hist_data+0x1f0/0x350
hist_unreg_all+0x203/0x220
event_trigger_open+0xbb/0x130
do_dentry_open+0x296/0x700
? stacktrace_count_trigger+0x30/0x30
? generic_permission+0x56/0x200
? __x64_sys_fchdir+0xd0/0xd0
? inode_permission+0x55/0x200
? security_inode_permission+0x18/0x60
path_openat+0x633/0x22b0
? path_lookupat.isra.50+0x420/0x420
? __kasan_kmalloc.constprop.12+0xc1/0xd0
? kmem_cache_alloc+0xe5/0x260
? getname_flags+0x6c/0x2a0
? do_sys_open+0x149/0x2b0
? do_syscall_64+0x73/0x1b0
? entry_SYSCALL_64_after_hwframe+0x44/0xa9
? _raw_write_lock_bh+0xe0/0xe0
? __kernel_text_address+0xe/0x30
? unwind_get_return_address+0x2f/0x50
? __list_add_valid+0x2d/0x70
? deactivate_slab.isra.62+0x1f4/0x5a0
? getname_flags+0x6c/0x2a0
? set_track+0x76/0x120
do_filp_open+0x11a/0x1a0
? may_open_dev+0x50/0x50
? _raw_spin_lock+0x7a/0xd0
? _raw_write_lock_bh+0xe0/0xe0
? __alloc_fd+0x10f/0x200
do_sys_open+0x1db/0x2b0
? filp_open+0x50/0x50
do_syscall_64+0x73/0x1b0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fa7b24a4ca2
Code: 25 00 00 41 00 3d 00 00 41 00 74 4c 48 8d 05 85 7a 0d 00 8b 00 85 c0
75 6d 89 f2 b8 01 01 00 00 48 89 fe bf 9c ff ff ff 0f 05 <48> 3d 00 f0 ff ff
0f 87 a2 00 00 00 48 8b 4c 24 28 64 48 33 0c 25
RSP: 002b:00007fffbafb3af0 EFLAGS: 00000246 ORIG_RAX: 0000000000000101
RAX: ffffffffffffffda RBX: 000055d3648ade30 RCX: 00007fa7b24a4ca2
RDX: 0000000000000241 RSI: 000055d364a55240 RDI: 00000000ffffff9c
RBP: 00007fffbafb3bf0 R08: 0000000000000020 R09: 0000000000000002
R10: 00000000000001b6 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000003 R14: 0000000000000001 R15: 000055d364a55240
==================================================================

So remove the track_data_destroy() destroy_hist_field() call for that
var_ref.

Link: http://lkml.kernel.org/r/1deffec420f6a16d11dd8647318d34a66d1989a9.camel@linux.intel.com
Fixes: 466f4528fbc69 ("tracing: Generalize hist trigger onmax and save action")
Reported-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

drm/i915: Mark AML 0x87CA as ULX

If I'm reading the spec right AML 0x87CA is a Y SKU, so it
should be marked as ULX in our old style terminology.

Cc: stable@vger.kernel.org
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: c0c46ca461f1 ("drm/i915/aml: Add new Amber Lake PCI ID")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322204944.23613-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit 57b1c4460dc46a00f6ec439f3f11d670736b0209)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge tag 'misc-habanalabs-fixes-2019-03-26' of git://people.freedesktop.org/~gabbayo/linux into char-misc-next:

Oded writes:

The following bug fixes are included in this tag:

- Fix host crash upon resume after suspend
- Fix MMU related bugs which result in user's jobs getting stuck
- Fix race between user context cleanup and hard-reset which results in
  host crash
- Fix sparse warning

* tag 'misc-habanalabs-fixes-2019-03-26' of git://people.freedesktop.org/~gabbayo/linux: (265 commits)
  habanalabs: cast to expected type
  habanalabs: prevent host crash during suspend/resume
  habanalabs: perform accounting for active CS
  habanalabs: fix mapping with page size bigger than 4KB
  habanalabs: complete user context cleanup before hard reset
  habanalabs: fix bug when mapping very large memory area
  habanalabs: fix MMU number of pages calculation
  Linux 5.1-rc2
  clocksource/drivers/clps711x: Remove board support
  ext4: prohibit fstrim in norecovery mode
  ext4: cleanup bh release code in ext4_ind_remove_space()
  ext4: brelse all indirect buffer in ext4_ind_remove_space()
  genirq: Mark expected switch case fall-through
  clocksource/drivers/riscv: Fix clocksource mask
  x86/gart: Exclude GART aperture from kcore
  cifs: update internal module version number
  SMB3: Fix SMB3.1.1 guest mounts to Samba
  cifs: Fix slab-out-of-bounds when tracing SMB tcon
  cifs: allow guest mounts to work for smb3.11
  fix incorrect error code mapping for OBJECTID_NOT_FOUND
  ...

scsi: qla4xxx: fix a potential NULL pointer dereference

In case iscsi_lookup_endpoint fails, the fix returns -EINVAL to avoid NULL
pointer dereference.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Insure we don't access PCIe space during AER/EEH

There are a few windows during AER/EEH when we can access PCIe I/O mapped
registers. This will harden the access to insure we do not allow PCIe
access during errors

Signed-off-by: Dave Carroll <david.carroll@microsemi.com>
Reviewed-by: Sagar Biradar <sagar.biradar@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: Fix kernel panic during expander reset

During expander reset handling, the driver invokes kernel function
scsi_host_find_tag() to obtain outstanding requests associated with the
scsi host managed by the driver. Driver loops from tag value zero to hba
queue depth to obtain the outstanding scmds. But when blk-mq is enabled,
the block layer may return stale entry for one or more requests. This may
lead to kernel panic if the returned value is inaccessible or the memory
pointed by the returned value is reused.

Reference of upstream discussion:

https://patchwork.kernel.org/patch/10734933/

Instead of calling scsi_host_find_tag() API for each and every smid (smid
is tag +1) from one to shost->can_queue, now driver will call this API (to
obtain the outstanding scmd) only for those smid's which are outstanding at
the driver level.

Driver will determine whether this smid is outstanding at driver level by
looking into it's corresponding MPI request frame, if its MPI request frame
is empty, then it means that this smid is free and does not need to call
scsi_host_find_tag() for it. By doing this, driver will invoke
scsi_host_find_tag() for only those tags which are outstanding at the
driver level.

Driver will check whether particular MPI request frame is empty or not by
looking into the "DevHandle" field. If this field is zero then it means
that this MPI request is empty. For active MPI request DevHandle must be
non-zero.

Also driver will memset the MPI request frame once the corresponding scmd
is processed (i.e. just before calling
scmd->done function).

Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

net: phy: don't clear BMCR in genphy_soft_reset

So far we effectively clear the BMCR register. Some PHY's can deal
with this (e.g. because they reset BMCR to a default as part of a
soft-reset) whilst on others this causes issues because e.g. the
autoneg bit is cleared. Marvell is an example, see also thread [0].
So let's be a little bit more gentle and leave all bits we're not
interested in as-is. This change is needed for PHY drivers to
properly deal with the original patch.

[0] https://marc.info/?t=155264050700001&r=1&w=2

Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset")
Tested-by: Phil Reid <preid@electromag.com.au>
Tested-by: liweihang <liweihang@hisilicon.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

PCI/LINK: Deduplicate bandwidth reports for multi-function devices

If a multi-function device's bandwidth is already limited when it is
enumerated, a message is logged only for function 0.  By contrast, when
downtraining occurs after enumeration, a message is logged for all
functions.  That's because the former uses pcie_report_downtraining(),
whereas the latter uses __pcie_print_link_status() (which doesn't filter
functions != 0).  I am seeing this happen on a MacBookPro9,1 with a GPU
(function 0) and an integrated HDA controller (function 1).

Avoid this incongruence by calling pcie_report_downtraining() in both
cases.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alexandru Gagniuc <alex.gagniuc@dellteam.com>

PCI/LINK: Clear bandwidth notification interrupt before enabling it

When booting a MacBookPro9,1, duplicate link downtraining messages are
logged for the devices directly attached to the two CPU-internal Root Ports
of the Core i7 3615QM:  Once on device enumeration and once on enablement
of the bandwidth notification interrupt on the Root Ports.

Duplicate messages do not occur with Root Ports on the PCH and Downstream
Ports on the Thunderbolt controller:  Only a single message is logged for
these, namely on device enumeration.

The reason for the duplicate messages is a stale interrupt in the Link
Status register of the 3615QM's internal Root Ports.  Avoid by clearing the
interrupt before enabling it.

An alternative approach would be to clear the interrupt already on device
enumeration or to report link downtraining only if the speed has changed.
That way, link downtraining occurring between device enumeration and
enablement of the bandwidth notification interrupt could be caught.
However clearing stale interrupts before enabling them is a standard
operating procedure for any driver and keeping the two steps in one place
makes the code easier to follow.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alexandru Gagniuc <alex.gagniuc@dellteam.com>

PCI/LINK: Supply IRQ handler so level-triggered IRQs are acked

A threaded IRQ with a NULL handler does not work with level-triggered
interrupts.  request_threaded_irq() will return an error:

  genirq: Threaded irq requested with handler=NULL and !ONESHOT for irq 16
  pcie_bw_notification: probe of 0000:00:1b.0:pcie010 failed with error -22

For level interrupts we need to silence the interrupt before exiting the
IRQ handler, so just clear the PCI_EXP_LNKSTA_LBMS bit there.

Fixes: e8303bb7a75c ("PCI/LINK: Report degraded links via link bandwidth notification")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Revert "parport: daisy: use new parport device model"

This reverts commit 1aec4211204d9463d1fd209eb50453de16254599.

Steven Rostedt reports that it causes a hang at bootup and bisected it
to this commit.

The troigger is apparently a module alias for "parport_lowlevel" that
points to "parport_pc", which causes a hang with

    modprobe -q -- parport_lowlevel

blocking forever with a backtrace like this:

    wait_for_completion_killable+0x1c/0x28
    call_usermodehelper_exec+0xa7/0x108
    __request_module+0x351/0x3d8
    get_lowlevel_driver+0x28/0x41 [parport]
    __parport_register_driver+0x39/0x1f4 [parport]
    daisy_drv_init+0x31/0x4f [parport]
    parport_bus_init+0x5d/0x7b [parport]
    parport_default_proc_register+0x26/0x1000 [parport]
    do_one_initcall+0xc2/0x1e0
    do_init_module+0x50/0x1d4
    load_module+0x1c2e/0x21b3
    sys_init_module+0xef/0x117

Supid says:
"Due to the new device model daisy driver will now try to find the
  parallel ports while trying to register its driver so that it can bind
  with them. Now, since daisy driver is loaded while parport bus is
  initialising the list of parport is still empty and it tries to load
  the lowlevel driver, which has an alias set to parport_pc, now causes
  a deadlock"

But I don't think the daisy driver should be loaded by the parport
initialization in the first place, so let's revert the whole change.

If the daisy driver can just initialize separately on its own (like a
driver should), instead of hooking into the parport init sequence
directly, this issue probably would go away.

Reported-and-bisected-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

libceph: fix breakage caused by multipage bvecs

A bvec can now consist of multiple physically contiguous pages.
This means that bvec_iter_advance() can move to a different page while
staying in the same bvec (i.e. ->bi_bvec_done != 0).

The messenger works in terms of segments which can now be defined as
the smaller of a bvec and a page. The "more bytes to process in this
segment" condition holds only if bvec_iter_advance() leaves us in the
same bvec _and_ in the same page. On next bvec (possibly in the same
page) and on next page (possibly in the same bvec) we may need to set
->last_piece.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

Merge tag 'drm-misc-fixes-2019-03-25' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

- A bunch of fixes to cleanup path in meson
- Fix the DMT TDMS clock filtering on meson
- Fix an issue with NV12 buffers on rockchip when scaling is active
- Fix a couple of use-after-free

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190325104523.obnfelgvaglyhe5e@flea

io_uring: offload write to async worker in case of -EAGAIN

In case of direct write -EAGAIN will be returned if page cache was
previously populated. To avoid immediate completion of a request
with -EAGAIN error write has to be offloaded to the async worker,
like io_read() does.

Signed-off-by: Roman Penyaev <rpenyaev@suse.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

sbitmap: order READ/WRITE freed instance and setting clear bit

Inside sbitmap_queue_clear(), once the clear bit is set, it will be
visiable to allocation path immediately. Meantime READ/WRITE on old
associated instance(such as request in case of blk-mq) may be
out-of-order with the setting clear bit, so race with re-allocation
may be triggered.

Adds one memory barrier for ordering READ/WRITE of the freed associated
instance with setting clear bit for avoiding race with re-allocation.

The following kernel oops triggerd by block/006 on aarch64 may be fixed:

[  142.330954] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000330
[  142.338794] Mem abort info:
[  142.341554]   ESR = 0x96000005
[  142.344632]   Exception class = DABT (current EL), IL = 32 bits
[  142.350500]   SET = 0, FnV = 0
[  142.353544]   EA = 0, S1PTW = 0
[  142.356678] Data abort info:
[  142.359528]   ISV = 0, ISS = 0x00000005
[  142.363343]   CM = 0, WnR = 0
[  142.366305] user pgtable: 64k pages, 48-bit VAs, pgdp = 000000002a3c51c0
[  142.372983] [0000000000000330] pgd=0000000000000000, pud=0000000000000000
[  142.379777] Internal error: Oops: 96000005 [#1] SMP
[  142.384613] Modules linked in: null_blk ib_isert iscsi_target_mod ib_srpt target_core_mod ib_srp scsi_transport_srp vfat fat rpcrdma sunrpc rdma_ucm ib_iser rdma_cm iw_cm libiscsi ib_umad scsi_transport_iscsi ib_ipoib ib_cm mlx5_ib ib_uverbs ib_core sbsa_gwdt crct10dif_ce ghash_ce ipmi_ssif sha2_ce ipmi_devintf sha256_arm64 sg sha1_ce ipmi_msghandler ip_tables xfs libcrc32c mlx5_core sdhci_acpi mlxfw ahci_platform at803x sdhci libahci_platform qcom_emac mmc_core hdma hdma_mgmt i2c_dev [last unloaded: null_blk]
[  142.429753] CPU: 7 PID: 1983 Comm: fio Not tainted 5.0.0.cki #2
[  142.449458] pstate: 00400005 (nzcv daif +PAN -UAO)
[  142.454239] pc : __blk_mq_free_request+0x4c/0xa8
[  142.458830] lr : blk_mq_free_request+0xec/0x118
[  142.463344] sp : ffff00003360f6a0
[  142.466646] x29: ffff00003360f6a0 x28: ffff000010e70000
[  142.471941] x27: ffff801729a50048 x26: 0000000000010000
[  142.477232] x25: ffff00003360f954 x24: ffff7bdfff021440
[  142.482529] x23: 0000000000000000 x22: 00000000ffffffff
[  142.487830] x21: ffff801729810000 x20: 0000000000000000
[  142.493123] x19: ffff801729a50000 x18: 0000000000000000
[  142.498413] x17: 0000000000000000 x16: 0000000000000001
[  142.503709] x15: 00000000000000ff x14: ffff7fe000000000
[  142.509003] x13: ffff8017dcde09a0 x12: 0000000000000000
[  142.514308] x11: 0000000000000001 x10: 0000000000000008
[  142.519597] x9 : ffff8017dcde09a0 x8 : 0000000000002000
[  142.524889] x7 : ffff8017dcde0a00 x6 : 000000015388f9be
[  142.530187] x5 : 0000000000000001 x4 : 0000000000000000
[  142.535478] x3 : 0000000000000000 x2 : 0000000000000000
[  142.540777] x1 : 0000000000000001 x0 : ffff00001041b194
[  142.546071] Process fio (pid: 1983, stack limit = 0x000000006460a0ea)
[  142.552500] Call trace:
[  142.554926]  __blk_mq_free_request+0x4c/0xa8
[  142.559181]  blk_mq_free_request+0xec/0x118
[  142.563352]  blk_mq_end_request+0xfc/0x120
[  142.567444]  end_cmd+0x3c/0xa8 [null_blk]
[  142.571434]  null_complete_rq+0x20/0x30 [null_blk]
[  142.576194]  blk_mq_complete_request+0x108/0x148
[  142.580797]  null_handle_cmd+0x1d4/0x718 [null_blk]
[  142.585662]  null_queue_rq+0x60/0xa8 [null_blk]
[  142.590171]  blk_mq_try_issue_directly+0x148/0x280
[  142.594949]  blk_mq_try_issue_list_directly+0x9c/0x108
[  142.600064]  blk_mq_sched_insert_requests+0xb0/0xd0
[  142.604926]  blk_mq_flush_plug_list+0x16c/0x2a0
[  142.609441]  blk_flush_plug_list+0xec/0x118
[  142.613608]  blk_finish_plug+0x3c/0x4c
[  142.617348]  blkdev_direct_IO+0x3b4/0x428
[  142.621336]  generic_file_read_iter+0x84/0x180
[  142.625761]  blkdev_read_iter+0x50/0x78
[  142.629579]  aio_read.isra.6+0xf8/0x190
[  142.633409]  __io_submit_one.isra.8+0x148/0x738
[  142.637912]  io_submit_one.isra.9+0x88/0xb8
[  142.642078]  __arm64_sys_io_submit+0xe0/0x238
[  142.646428]  el0_svc_handler+0xa0/0x128
[  142.650238]  el0_svc+0x8/0xc
[  142.653104] Code: b9402a63 f9000a7f 3100047f 540000a0 (f9419a81)
[  142.659202] ---[ end trace 467586bc175eb09d ]---

Fixes: ea86ea2cdced20057da ("sbitmap: ammortize cost of clearing bits")
Reported-and-bisected_and_tested-by: Yi Zhang <yi.zhang@redhat.com>
Cc: Yi Zhang <yi.zhang@redhat.com>
Cc: "jianchao.wang" <jianchao.w.wang@oracle.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: fix sbitmap ws_active for shared tags

We now wrap sbitmap waitqueues in an active counter, so we can avoid
iterating wakeups unless we have waiters there. This works as long as
everyone that's manipulating the waitqueues use the proper helpers. For
the tag wait case for shared tags, however, we add ourselves to the
waitqueue without incrementing/decrementing the ->ws_active count. This
means that wakeups can take a long time to happen.

Fix this by manually doing the inc/dec as needed for the wait queue
handling.

Reported-by: Michael Leun <kbug@newton.leun.net>
Tested-by: Michael Leun <kbug@newton.leun.net>
Cc: stable@vger.kernel.org
Reviewed-by: Omar Sandoval <osandov@fb.com>
Fixes: 5d2ee7122c73 ("sbitmap: optimize wakeup check")
Signed-off-by: Jens Axboe <axboe@kernel.dk>

arm64: tegra: Disable CQE Support for SDMMC4 on Tegra186

Enabling CQE support on Tegra186 Jetson TX2 has introduced a regression
that is causing accesses to the file-system on the eMMC to fail. Errors
such as the following have been observed ...

mmc2: running CQE recovery
mmc2: mmc_select_hs400 failed, error -110
print_req_error: I/O error, dev mmcblk2, sector 8 flags 80700
mmc2: cqhci: CQE failed to exit halt state

For now disable CQE support for Tegra186 until this issue is resolved.

Fixes: dfd3cb6feb73 arm64: tegra: Add CQE Support for SDMMC4
Signed-off-by: Jonathan Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-fixes-5.1' of git://git./linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 5.1:
- Correct phy mode setting of imx6dl-yapp4 board to fix a problem
   caused by commit 5ecdd77c61c8 ("net: dsa: qca8k: disable delay
   for RGMII mode").
- Add a missing of_node_put call to fix leaked reference detected by
   coccinelle in imx51 machine code.
- Fix imx6q cpuidle driver bug which causes that CPU might not wake up
   at expected time.
- Increase reset duration of Ethernet phy Micrel KSZ9031RNX to fix
   transmission timeouts error seen on imx6qdl-phytec-pfla02 board.
- Correct SPDX License Identifier style for imx6ull-pinfunc-snvs.h.
- Fix 'bus-witdh' typos in imx6qdl-icore-rqs.dtsi.
- Correct pseudo PHY address of switch device for imx6dl-yapp4 board.
- Update PWM driver options in imx defconfig files due to the change
   on driver part.

* tag 'imx-fixes-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx_v4_v5_defconfig: enable PWM driver
  ARM: imx_v6_v7_defconfig: continue compiling the pwm driver
  ARM: dts: imx6dl-yapp4: Use correct pseudo PHY address for the switch
  ARM: dts: imx6qdl: Fix typo in imx6qdl-icore-rqs.dtsi
  ARM: dts: imx6ull: Use the correct style for SPDX License Identifier
  ARM: dts: pfla02: increase phy reset duration
  ARM: imx6q: cpuidle: fix bug that CPU might not wake up at expected time
  ARM: imx51: fix a leaked reference by adding missing of_node_put
  ARM: dts: imx6dl-yapp4: Use rgmii-id phy mode on the cpu port

io_uring: fix big-endian compat signal mask handling

On big-endian architectures, the signal masks are differnet
between 32-bit and 64-bit tasks, so we have to use a different
function for reading them from user space.

io_cqring_wait() initially got this wrong, and always interprets
this as a native structure. This is ok on x86 and most arm64,
but not on s390, ppc64be, mips64be, sparc64 and parisc.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'arm-soc/for-5.1/soc-fixes' of https://github.com/Broadcom/stblinux into arm/fixes

This pull request contains Broadcom ARM/ARM64-based SoCs fixes for 5.1,
please pull the following:

- Eric provides fixes for the bcm2835-pm driver: added missing depends
  on MFD_CORE for the ARM64 definition of ARCH_BCM2835, fixing error
  paths on initialization and fixing the PM_IMAGE_PERI power domain

* tag 'arm-soc/for-5.1/soc-fixes' of https://github.com/Broadcom/stblinux:
  arm64: bcm2835: Add missing dependency on MFD_CORE.
  soc: bcm: bcm2835-pm: Fix error paths of initialization.
  soc: bcm: bcm2835-pm: Fix PM_IMAGE_PERI power domain support.

Merge tag 'arm-soc/for-5.1/devicetree-fixes' of https://github.com/Broadcom/stblinux into arm/fixes

This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
5.1, please pull the following:

- Helen fixes the HDMI hot-pug detect GPIO polarity for the Rasperry Pi
model B revision 2

* tag 'arm-soc/for-5.1/devicetree-fixes' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm283x: Fix hdmi hpd gpio pull

ARM: dts: nomadik: Fix polarity of SPI CS

The SPI DT bindings are for historical reasons a pitfall,
the ability to flag a GPIO line as active high/low with
the second cell flags was introduced later so the SPI
subsystem will only accept the bool flag spi-cs-high
to indicate that the line is active high.

It worked by mistake, but the mistake was corrected
in another commit.

The comment in the DTS file was also misleading: this
CS is indeed active high.

Fixes: cffbb02dafa3 ("ARM: dts: nomadik: Augment NHK15 panel setting")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-fixes-for-v5.1' of git://git./linux/kernel/git/horms/renesas into arm/fixes

Renesas ARM Based SoC Fixes for v5.1

R-Car Gen3 E3 (r8a77990) and RZ/G2E (r8a774c0) SoCs:
* Correct SCIF5 DMA channels

* tag 'renesas-fixes-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: dts: renesas: r8a774c0: Fix SCIF5 DMA channels
arm64: dts: renesas: r8a77990: Fix SCIF5 DMA channels

ARM: davinci: fix build failure with allnoconfig

allnoconfig build with just ARCH_DAVINCI enabled
fails because drivers/clk/davinci/* depends on
REGMAP being enabled.

Fix it by selecting REGMAP_MMIO when building in
DaVinci support.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

ALSA: pcm: Don't suspend stream in unrecoverable PCM state

Currently PCM core sets each opened stream forcibly to SUSPENDED state
via snd_pcm_suspend_all() call, and the user-space is responsible for
re-triggering the resume manually either via snd_pcm_resume() or
prepare call.  The scheme works fine usually, but there are corner
cases where the stream can't be resumed by that call: the streams
still in OPEN state before finishing hw_params.  When they are
suspended, user-space cannot perform resume or prepare because they
haven't been set up yet.  The only possible recovery is to re-open the
device, which isn't nice at all.  Similarly, when a stream is in
DISCONNECTED state, it makes no sense to change it to SUSPENDED
state.  Ditto for in SETUP state; which you can re-prepare directly.

So, this patch addresses these issues by filtering the PCM streams to
be suspended by checking the PCM state.  When a stream is in either
OPEN, SETUP or DISCONNECTED as well as already SUSPENDED, the suspend
action is skipped.

To be noted, this problem was originally reported for the PCM runtime
PM on HD-audio.  And, the runtime PM problem itself was already
addressed (although not intended) by the code refactoring commits
3d21ef0b49f8 ("ALSA: pcm: Suspend streams globally via device type PM
ops") and 17bc4815de58 ("ALSA: pci: Remove superfluous
snd_pcm_suspend*() calls").  These commits eliminated the
snd_pcm_suspend*() calls from the runtime PM suspend callback code
path, hence the racy OPEN state won't appear while runtime PM.
(FWIW, the race window is between snd_pcm_open_substream() and the
first power up in azx_pcm_open().)

Although the runtime PM issue was already "fixed", the same problem is
still present for the system PM, hence this patch is still needed.
And for stable trees, this patch alone should suffice for fixing the
runtime PM problem, too.

Reported-and-tested-by: Jon Hunter <jonathanh@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

xfs: prohibit fstrim in norecovery mode

The xfs fstrim implementation uses the free space btrees to find free
space that can be discarded. If we haven't recovered the log, the bnobt
will be stale and we absolutely *cannot* use stale metadata to zap the
underlying storage.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>

locks: wake any locks blocked on request before deadlock check

Andreas reported that he was seeing the tdbtorture test fail in some
cases with -EDEADLCK when it wasn't before. Some debugging showed that
deadlock detection was sometimes discovering the caller's lock request
itself in a dependency chain.

While we remove the request from the blocked_lock_hash prior to
reattempting to acquire it, any locks that are blocked on that request
will still be present in the hash and will still have their fl_blocker
pointer set to the current request.

This causes posix_locks_deadlock to find a deadlock dependency chain
when it shouldn't, as a lock request cannot block itself.

We are going to end up waking all of those blocked locks anyway when we
go to reinsert the request back into the blocked_lock_hash, so just do
it prior to checking for deadlocks. This ensures that any lock blocked
on the current request will no longer be part of any blocked request
chain.

URL: https://bugzilla.kernel.org/show_bug.cgi?id=202975
Fixes: 5946c4319ebb ("fs/locks: allow a lock request to block other requests.")
Cc: stable@vger.kernel.org
Reported-by: Andreas Schneider <asn@redhat.com>
Signed-off-by: Neil Brown <neilb@suse.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>

drm/meson: fix TMDS clock filtering for DMT monitors

DMT monitors does not necessarely report a maximum TMDS clock
in a VSDB EDID extension.

In this case, all modes are wrongly rejected, including
the DRM fallback EDID.

This patch only rejects modes whith clock > max_tmds_clock if
the max_tmds_clock is specified. This will only reject
4:2:0 HDMI2.0 modes, who reports a clock > max_tmds_clock.

Reported-by: Maxime Jourdan <mjourdan@baylibre.com>
Fixes: d7d8fb7046b6 ("drm/meson: add HDMI div40 TMDS mode")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Maxime Jourdan <mjourdan@baylibre.com>
Reviewed-by: Maxime Jourdan <mjourdan@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190320081110.1718-1-narmstrong@baylibre.com

drm/meson: Uninstall IRQ handler

meson_drv_unbind() doesn't unregister the IRQ handler, which can lead to
use-after-free if the IRQ fires after unbind:

[ 64.656876] Unable to handle kernel paging request at virtual address ffff000011706dbc
...
[ 64.662001] pc : meson_irq+0x18/0x30 [meson_drm]

I'm assuming that a similar problem could happen on the error path of
bind(), so uninstall the IRQ handler there as well.

Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller")
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322152657.13752-2-jean-philippe.brucker@arm.com

drm/meson: Fix invalid pointer in meson_drv_unbind()

meson_drv_bind() registers a meson_drm struct as the device's privdata,
but meson_drv_unbind() tries to retrieve a drm_device. This may cause a
segfault on shutdown:

[ 5194.593429] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000197
...
[ 5194.788850] Call trace:
[ 5194.791349] drm_dev_unregister+0x1c/0x118 [drm]
[ 5194.795848] meson_drv_unbind+0x50/0x78 [meson_drm]

Retrieve the right pointer in meson_drv_unbind().

Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller")
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322152657.13752-1-jean-philippe.brucker@arm.com