Parav Pandit [Tue, 10 Aug 2021 13:24:21 +0000 (16:24 +0300)]
net/mlx5: Fix unpublish devlink parameters
Cleanup routine missed to unpublish the parameters. Add it.
Fixes:
e890acd5ff18 ("net/mlx5: Add devlink flow_steering_mode parameter")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Parav Pandit [Tue, 10 Aug 2021 13:24:20 +0000 (16:24 +0300)]
devlink: Add APIs to publish, unpublish individual parameter
Enable drivers to publish/unpublish individual parameter.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Parav Pandit [Tue, 10 Aug 2021 13:24:19 +0000 (16:24 +0300)]
devlink: Add API to register and unregister single parameter
Currently device configuration parameters can be registered as an array.
Due to this a constant array must be registered. A single driver
supporting multiple devices each with different device capabilities end
up registering all parameters even if it doesn't support it.
One possible workaround a driver can do is, it registers multiple single
entry arrays to overcome such limitation.
Better is to provide a API that enables driver to register/unregister a
single parameter. This also further helps in two ways.
(1) to reduce the memory of devlink_param_entry by avoiding in registering
parameters which are not supported by the device.
(2) avoid generating multiple parameter add, delete, publish, unpublish,
init value notifications for such unsupported parameters
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Parav Pandit [Tue, 10 Aug 2021 13:24:18 +0000 (16:24 +0300)]
devlink: Create a helper function for one parameter registration
Create and use a helper function for one parameter registration.
Subsequent patch also will reuse this for driver facing routine to
register a single parameter.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Parav Pandit [Tue, 10 Aug 2021 13:24:17 +0000 (16:24 +0300)]
devlink: Add new "enable_vnet" generic device param
Add new device generic parameter to enable/disable creation of
VDPA net auxiliary device and associated device functionality
in the devlink instance.
User who prefers to disable such functionality can disable it using below
example.
$ devlink dev param set pci/0000:06:00.0 \
name enable_vnet value false cmode driverinit
$ devlink dev reload pci/0000:06:00.0
At this point devlink instance do not create auxiliary device for the
VDPA net functionality.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Parav Pandit [Tue, 10 Aug 2021 13:24:16 +0000 (16:24 +0300)]
devlink: Add new "enable_rdma" generic device param
Add new device generic parameter to enable/disable creation of
RDMA auxiliary device and associated device functionality
in the devlink instance.
User who prefers to disable such functionality can disable it using below
example.
$ devlink dev param set pci/0000:06:00.0 \
name enable_rdma value false cmode driverinit
$ devlink dev reload pci/0000:06:00.0
At this point devlink instance do not create auxiliary device for the
RDMA functionality.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Parav Pandit [Tue, 10 Aug 2021 13:24:15 +0000 (16:24 +0300)]
devlink: Add new "enable_eth" generic device param
Add new device generic parameter to enable/disable creation of
Ethernet auxiliary device and associated device functionality
in the devlink instance.
User who prefers to disable such functionality can disable it using below
example.
$ devlink dev param set pci/0000:06:00.0 \
name enable_eth value false cmode driverinit
$ devlink dev reload pci/0000:06:00.0
At this point devlink instance do not create auxiliary device for the
Ethernet functionality.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 11 Aug 2021 12:34:41 +0000 (13:34 +0100)]
Merge branch 'bridge-global-mcast'
Nikolay Aleksandrov says:
====================
net: bridge: vlan: add global mcast options
This is the first follow-up set after the support for per-vlan multicast
contexts which extends global vlan options to support bridge's multicast
config per-vlan, it enables user-space to change and dump the already
existing bridge vlan multicast context options. The global option patches
(01 - 09 and 12-13) follow a similar pattern of changing current mcast
functions to take multicast context instead of a port/bridge directly.
Option equality checks have been added for dumping vlan range compression.
The last 2 patches extend the mcast router dump support so it can be
re-used when dumping vlan config.
patches 01 - 09: add support for various mcast options
patches 10 - 11: prepare for per-vlan querier control
patches 12 - 13: add support for querier control and router control
patches 14 - 15: add support for dumping per-vlan router ports
Next patch-sets:
- per-port/vlan router option config
- iproute2 support for all new vlan options
- selftests
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov [Tue, 10 Aug 2021 15:29:33 +0000 (18:29 +0300)]
net: bridge: vlan: use br_rports_fill_info() to export mcast router ports
Embed the standard multicast router port export by br_rports_fill_info()
into a new global vlan attribute BRIDGE_VLANDB_GOPTS_MCAST_ROUTER_PORTS.
In order to have the same format for the global bridge mcast context and
the per-vlan mcast context we need a double-nesting:
- BRIDGE_VLANDB_GOPTS_MCAST_ROUTER_PORTS
- MDBA_ROUTER
Currently we don't compare router lists, if any router port exists in
the bridge mcast contexts we consider their option sets as different and
export them separately.
In addition we export the router port vlan id when dumping similar to
the router port notification format.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov [Tue, 10 Aug 2021 15:29:32 +0000 (18:29 +0300)]
net: bridge: mcast: use the proper multicast context when dumping router ports
When we are dumping the router ports of a vlan mcast context we need to
use the bridge/vlan and port/vlan's multicast contexts to check if
IPv4/IPv6 router port is present and later to dump the vlan id.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov [Tue, 10 Aug 2021 15:29:31 +0000 (18:29 +0300)]
net: bridge: vlan: add support for mcast router global option
Add support to change and retrieve global vlan multicast router state
which is used for the bridge itself. We just need to pass multicast context
to br_multicast_set_router instead of bridge device and the rest of the
logic remains the same.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov [Tue, 10 Aug 2021 15:29:30 +0000 (18:29 +0300)]
net: bridge: vlan: add support for mcast querier global option
Add support to change and retrieve global vlan multicast querier state.
We just need to pass multicast context to br_multicast_set_querier
instead of bridge device and the rest of the logic remains the same.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov [Tue, 10 Aug 2021 15:29:29 +0000 (18:29 +0300)]
net: bridge: mcast: querier and query state affect only current context type
It is a minor optimization and better behaviour to make sure querier and
query sending routines affect only the matching multicast context
depending if vlan snooping is enabled (vlan ctx vs bridge ctx).
It also avoids sending unnecessary extra query packets.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov [Tue, 10 Aug 2021 15:29:28 +0000 (18:29 +0300)]
net: bridge: mcast: move querier state to the multicast context
We need to have the querier state per multicast context in order to have
per-vlan control, so remove the internal option bit and move it to the
multicast context. Also annotate the lockless reads of the new variable.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov [Tue, 10 Aug 2021 15:29:27 +0000 (18:29 +0300)]
net: bridge: vlan: add support for mcast startup query interval global option
Add support to change and retrieve global vlan multicast startup query
interval option.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov [Tue, 10 Aug 2021 15:29:26 +0000 (18:29 +0300)]
net: bridge: vlan: add support for mcast query response interval global option
Add support to change and retrieve global vlan multicast query response
interval option.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov [Tue, 10 Aug 2021 15:29:25 +0000 (18:29 +0300)]
net: bridge: vlan: add support for mcast query interval global option
Add support to change and retrieve global vlan multicast query interval
option.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov [Tue, 10 Aug 2021 15:29:24 +0000 (18:29 +0300)]
net: bridge: vlan: add support for mcast querier interval global option
Add support to change and retrieve global vlan multicast querier interval
option.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov [Tue, 10 Aug 2021 15:29:23 +0000 (18:29 +0300)]
net: bridge: vlan: add support for mcast membership interval global option
Add support to change and retrieve global vlan multicast membership
interval option.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov [Tue, 10 Aug 2021 15:29:22 +0000 (18:29 +0300)]
net: bridge: vlan: add support for mcast last member interval global option
Add support to change and retrieve global vlan multicast last member
interval option.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov [Tue, 10 Aug 2021 15:29:21 +0000 (18:29 +0300)]
net: bridge: vlan: add support for mcast startup query count global option
Add support to change and retrieve global vlan multicast startup query
count option.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov [Tue, 10 Aug 2021 15:29:20 +0000 (18:29 +0300)]
net: bridge: vlan: add support for mcast last member count global option
Add support to change and retrieve global vlan multicast last member
count option.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov [Tue, 10 Aug 2021 15:29:19 +0000 (18:29 +0300)]
net: bridge: vlan: add support for mcast igmp/mld version global options
Add support to change and retrieve global vlan IGMP/MLD versions.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 11 Aug 2021 12:31:56 +0000 (13:31 +0100)]
Merge branch 'ipa-runtime-pm'
Alex Elder says:
====================
net: ipa: use runtime PM reference counting
This series does further rework of the IPA clock code so that we
rely on some of the core runtime power management code (including
its referencing counting) instead.
The first patch makes ipa_clock_get() act like pm_runtime_get_sync().
The second patch makes system suspend occur regardless of the
current reference count value, which is again more like how the
runtime PM core code behaves.
The third patch creates functions to encapsulate all hardware
suspend and resume activity. The fourth uses those functions as
the ->runtime_suspend and ->runtime_resume power callbacks. With
that in place, ipa_clock_get() and ipa_clock_put() are changed to
use runtime PM get and put functions when needed.
The fifth patch eliminates an extra clock reference previously used
to control system suspend. The sixth eliminates the "IPA clock"
reference count and mutex.
The final patch replaces the one call to ipa_clock_get_additional()
with a call to pm_runtime_get_if_active(), making the former
unnecessary.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Tue, 10 Aug 2021 19:27:04 +0000 (14:27 -0500)]
net: ipa: kill ipa_clock_get_additional()
Now that ipa_clock_get_additional() is a trivial wrapper around
pm_runtime_get_if_active(), just open-code it in its only caller
and delete the function.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Tue, 10 Aug 2021 19:27:03 +0000 (14:27 -0500)]
net: ipa: kill IPA clock reference count
The runtime power management core code maintains a usage count. This
count mirrors the IPA clock reference count, and there's no need to
maintain both. So get rid of the IPA clock reference count and just
rely on the runtime PM usage count to determine when the hardware
should be suspended or resumed.
Use pm_runtime_get_if_active() in ipa_clock_get_additional(). We
care whether power is active, regardless of whether it's in use, so
pass true for its ign_usage_count argument.
The IPA clock mutex is just used to make enabling/disabling the
clock and updating the reference count occur atomically. Without
the reference count, there's no need for the mutex, so get rid of
that too.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Tue, 10 Aug 2021 19:27:02 +0000 (14:27 -0500)]
net: ipa: get rid of extra clock reference
Suspending the IPA hardware is now managed by the runtime PM core
code. The ->runtime_idle callback returns a non-zero value, so it
will never suspend except when forced. As a result, there's no need
to take an extra "do not suspend" clock reference.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Tue, 10 Aug 2021 19:27:01 +0000 (14:27 -0500)]
net: ipa: use runtime PM core
Use the runtime power management core to cause hardware suspend and
resume to occur. Enable it in ipa_clock_init() (without autosuspend),
and disable it in ipa_clock_exit().
Use ipa_runtime_suspend() as the ->runtime_suspend power operation,
and arrange for it to be called by having ipa_clock_get() call
pm_runtime_get_sync() when the first clock reference is taken.
Similarly, use ipa_runtime_resume() as the ->runtime_resume power
operation, and pm_runtime_put() when the last IPA clock reference
is dropped.
Introduce ipa_runtime_idle() as the ->runtime_idle power operation,
and have it return a non-zero value; this way suspend will never
occur except when forced.
Use pm_runtime_force_suspend() and pm_runtime_force_resume() as the
system suspend and resume callbacks, and remove ipa_suspend() and
ipa_resume().
Store a pointer to the device structure passed to ipa_clock_init(),
so it can be used by ipa_clock_exit() to disable runtime power
management.
For now we preserve IPA clock reference counting.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Tue, 10 Aug 2021 19:27:00 +0000 (14:27 -0500)]
net: ipa: resume in ipa_clock_get()
Introduce ipa_runtime_suspend() and ipa_runtime_resume(), which
encapsulate the activities necessary for suspending and resuming
the IPA hardware. Call these functions from ipa_clock_get() and
ipa_clock_put() when the first reference is taken or last one is
dropped.
When the very first clock reference is taken (for ipa_config()),
setup isn't complete yet, so (as before) only the core clock gets
enabled.
When the last clock reference is dropped (after ipa_deconfig()),
ipa_teardown() will have made the setup_complete flag false, so
there too, the core clock will be stopped without affecting GSI
or the endpoints.
Otherwise these new functions will perform the desired suspend and
resume actions once setup is complete.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Tue, 10 Aug 2021 19:26:59 +0000 (14:26 -0500)]
net: ipa: disable clock in suspend
Disable the IPA clock rather than dropping a reference to it in the
system suspend callback. This forces the suspend to occur without
affecting existing references.
Similarly, enable the clock rather than taking a reference in
ipa_resume(), forcing a resume without changing the reference count.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Tue, 10 Aug 2021 19:26:58 +0000 (14:26 -0500)]
net: ipa: have ipa_clock_get() return a value
We currently assume no errors occur when enabling or disabling the
IPA core clock and interconnects. And although this commit exposes
errors that could occur, we generally assume this won't happen in
practice.
This commit changes ipa_clock_get() and ipa_clock_put() so each
returns a value. The values returned are meant to mimic what the
runtime power management functions return, so we can set up error
handling here before we make the switch. Have ipa_clock_get()
increment the reference count even if it returns an error, to match
the behavior of pm_runtime_get().
More details follow.
When taking a reference in ipa_clock_get(), return 0 for the first
reference, 1 for subsequent references, or a negative error code if
an error occurs. Note that if ipa_clock_get() returns an error, we
must not touch hardware; in some cases such errors now cause entire
blocks of code to be skipped.
When dropping a reference in ipa_clock_put(), we return 0 or an
error code. The error would come from ipa_clock_disable(), which
now returns what ipa_interconnect_disable() returns (either 0 or a
negative error code). For now, callers ignore the return value;
if an error occurs, a message will have already been logged, and
little more can actually be done to improve the situation.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 11 Aug 2021 09:22:26 +0000 (10:22 +0100)]
Merge git://git./linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Use nfnetlink_unicast() instead of netlink_unicast() in nft_compat.
2) Remove call to nf_ct_l4proto_find() in flowtable offload timeout
fixup.
3) CLUSTERIP registers ARP hook on demand, from Florian.
4) Use clusterip_net to store pernet warning, also from Florian.
5) Remove struct netns_xt, from Florian Westphal.
6) Enable ebtables hooks in initns on demand, from Florian.
7) Allow to filter conntrack netlink dump per status bits,
from Florian Westphal.
8) Register x_tables hooks in initns on demand, from Florian.
9) Remove queue_handler from per-netns structure, again from Florian.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Lahav Schlesinger [Tue, 10 Aug 2021 09:06:58 +0000 (09:06 +0000)]
net: Support filtering interfaces on no master
Currently there's support for filtering neighbours/links for interfaces
which have a specific master device (using the IFLA_MASTER/NDA_MASTER
attributes).
This patch adds support for filtering interfaces/neighbours dump for
interfaces that *don't* have a master.
Signed-off-by: Lahav Schlesinger <lschlesinger@drivenets.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20210810090658.2778960-1-lschlesinger@drivenets.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mark Bloch [Tue, 10 Aug 2021 03:43:05 +0000 (03:43 +0000)]
net/sched: cls_api, reset flags on replay
tc_new_tfilter() can replay a request if it got EAGAIN. The cited commit
didn't account for this when it converted TC action ->init() API
to use flags instead of parameters. This can lead to passing stale flags
down the call chain which results in trying to lock rtnl when it's
already locked, deadlocking the entire system.
Fix by making sure to reset flags on each replay.
============================================
WARNING: possible recursive locking detected
5.14.0-rc3-custom-49011-g3d2bbb4f104d #447 Not tainted
--------------------------------------------
tc/37605 is trying to acquire lock:
ffffffff841df2f0 (rtnl_mutex){+.+.}-{3:3}, at: tc_setup_cb_add+0x14b/0x4d0
but task is already holding lock:
ffffffff841df2f0 (rtnl_mutex){+.+.}-{3:3}, at: tc_new_tfilter+0xb12/0x22e0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(rtnl_mutex);
lock(rtnl_mutex);
*** DEADLOCK ***
May be due to missing lock nesting notation
1 lock held by tc/37605:
#0:
ffffffff841df2f0 (rtnl_mutex){+.+.}-{3:3}, at: tc_new_tfilter+0xb12/0x22e0
stack backtrace:
CPU: 0 PID: 37605 Comm: tc Not tainted 5.14.0-rc3-custom-49011-g3d2bbb4f104d #447
Hardware name: Mellanox Technologies Ltd. MSN2010/SA002610, BIOS 5.6.5 08/24/2017
Call Trace:
dump_stack_lvl+0x8b/0xb3
__lock_acquire.cold+0x175/0x3cb
lock_acquire+0x1a4/0x4f0
__mutex_lock+0x136/0x10d0
fl_hw_replace_filter+0x458/0x630 [cls_flower]
fl_change+0x25f2/0x4a64 [cls_flower]
tc_new_tfilter+0xa65/0x22e0
rtnetlink_rcv_msg+0x86c/0xc60
netlink_rcv_skb+0x14d/0x430
netlink_unicast+0x539/0x7e0
netlink_sendmsg+0x84d/0xd80
____sys_sendmsg+0x7ff/0x970
___sys_sendmsg+0xf8/0x170
__sys_sendmsg+0xea/0x1b0
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f7b93b6c0a7
Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48>
RSP: 002b:
00007ffe365b3818 EFLAGS:
00000246 ORIG_RAX:
000000000000002e
RAX:
ffffffffffffffda RBX:
0000000000000000 RCX:
00007f7b93b6c0a7
RDX:
0000000000000000 RSI:
00007ffe365b3880 RDI:
0000000000000003
RBP:
00000000610a75f6 R08:
0000000000000001 R09:
0000000000000000
R10:
fffffffffffff3a9 R11:
0000000000000246 R12:
0000000000000001
R13:
0000000000000000 R14:
00007ffe365b7b58 R15:
00000000004822c0
Fixes:
695176bfe5de ("net_sched: refactor TC action init API")
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20210810034305.63997-1-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 10 Aug 2021 20:19:16 +0000 (13:19 -0700)]
Merge branch 'mlx5-next' of git://git./linux/kernel/git/mellanox/linux
Saeed Mahameed says:
====================
pull-request: mlx5-next 2020-08-9
This pulls mlx5-next branch which includes patches already reviewed on
net-next and rdma mailing lists.
1) mlx5 single E-Switch FDB for lag
2) IB/mlx5: Rename is_apu_thread_cq function to is_apu_cq
3) Add DCS caps & fields support
[1] https://patchwork.kernel.org/project/netdevbpf/cover/
20210803231959.26513-1-saeed@kernel.org/
[2] https://patchwork.kernel.org/project/netdevbpf/patch/
0e3364dab7e0e4eea5423878b01aa42470be8d36.
1626609184.git.leonro@nvidia.com/
[3] https://patchwork.kernel.org/project/netdevbpf/patch/
55e1d69bef1fbfa5cf195c0bfcbe35c8019de35e.
1624258894.git.leonro@nvidia.com/
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Lag, Create shared FDB when in switchdev mode
net/mlx5: E-Switch, add logic to enable shared FDB
net/mlx5: Lag, move lag destruction to a workqueue
net/mlx5: Lag, properly lock eswitch if needed
net/mlx5: Add send to vport rules on paired device
net/mlx5: E-Switch, Add event callback for representors
net/mlx5e: Use shared mappings for restoring from metadata
net/mlx5e: Add an option to create a shared mapping
net/mlx5: E-Switch, set flow source for send to uplink rule
RDMA/mlx5: Add shared FDB support
{net, RDMA}/mlx5: Extend send to vport rules
RDMA/mlx5: Fill port info based on the relevant eswitch
net/mlx5: Lag, add initial logic for shared FDB
net/mlx5: Return mdev from eswitch
IB/mlx5: Rename is_apu_thread_cq function to is_apu_cq
net/mlx5: Add DCS caps & fields support
====================
Link: https://lore.kernel.org/r/20210809202522.316930-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Westphal [Thu, 5 Aug 2021 10:02:43 +0000 (12:02 +0200)]
netfilter: nf_queue: move hookfn registration out of struct net
This was done to detect when the pernet->init() function was not called
yet, by checking if net->nf.queue_handler is NULL.
Once the nfnetlink_queue module is active, all struct net pointers
contain the same address. So place this back in nf_queue.c.
Handle the 'netns error unwind' test by checking nfnl_queue_net for a
NULL pointer and add a comment for this.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Jakub Kicinski [Tue, 10 Aug 2021 14:27:09 +0000 (07:27 -0700)]
Merge https://git./linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
bpf-next 2021-08-10
We've added 31 non-merge commits during the last 8 day(s) which contain
a total of 28 files changed, 3644 insertions(+), 519 deletions(-).
1) Native XDP support for bonding driver & related BPF selftests, from Jussi Maki.
2) Large batch of new BPF JIT tests for test_bpf.ko that came out as a result from
32-bit MIPS JIT development, from Johan Almbladh.
3) Rewrite of netcnt BPF selftest and merge into test_progs, from Stanislav Fomichev.
4) Fix XDP bpf_prog_test_run infra after net to net-next merge, from Andrii Nakryiko.
5) Follow-up fix in unix_bpf_update_proto() to enforce socket type, from Cong Wang.
6) Fix bpf-iter-tcp4 selftest to print the correct dest IP, from Jose Blanquicet.
7) Various misc BPF XDP sample improvements, from Niklas Söderlund, Matthew Cover,
and Muhammad Falak R Wani.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (31 commits)
bpf, tests: Add tail call test suite
bpf, tests: Add tests for BPF_CMPXCHG
bpf, tests: Add tests for atomic operations
bpf, tests: Add test for 32-bit context pointer argument passing
bpf, tests: Add branch conversion JIT test
bpf, tests: Add word-order tests for load/store of double words
bpf, tests: Add tests for ALU operations implemented with function calls
bpf, tests: Add more ALU64 BPF_MUL tests
bpf, tests: Add more BPF_LSH/RSH/ARSH tests for ALU64
bpf, tests: Add more ALU32 tests for BPF_LSH/RSH/ARSH
bpf, tests: Add more tests of ALU32 and ALU64 bitwise operations
bpf, tests: Fix typos in test case descriptions
bpf, tests: Add BPF_MOV tests for zero and sign extension
bpf, tests: Add BPF_JMP32 test cases
samples, bpf: Add an explict comment to handle nested vlan tagging.
selftests/bpf: Add tests for XDP bonding
selftests/bpf: Fix xdp_tx.c prog section name
net, core: Allow netdev_lower_get_next_private_rcu in bh context
bpf, devmap: Exclude XDP broadcast to master device
net, bonding: Add XDP support to the bonding driver
...
====================
Link: https://lore.kernel.org/r/20210810130038.16927-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Johan Almbladh [Mon, 9 Aug 2021 09:18:29 +0000 (11:18 +0200)]
bpf, tests: Add tail call test suite
While BPF_CALL instructions were tested implicitly by the cBPF-to-eBPF
translation, there has not been any tests for BPF_TAIL_CALL instructions.
The new test suite includes tests for tail call chaining, tail call count
tracking and error paths. It is mainly intended for JIT development and
testing.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210809091829.810076-15-johan.almbladh@anyfinetworks.com
Johan Almbladh [Mon, 9 Aug 2021 09:18:28 +0000 (11:18 +0200)]
bpf, tests: Add tests for BPF_CMPXCHG
Tests for BPF_CMPXCHG with both word and double word operands. As with
the tests for other atomic operations, these tests only check the result
of the arithmetic operation. The atomicity of the operations is not tested.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210809091829.810076-14-johan.almbladh@anyfinetworks.com
Johan Almbladh [Mon, 9 Aug 2021 09:18:27 +0000 (11:18 +0200)]
bpf, tests: Add tests for atomic operations
Tests for each atomic arithmetic operation and BPF_XCHG, derived from
old BPF_XADD tests. The tests include BPF_W/DW and BPF_FETCH variants.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210809091829.810076-13-johan.almbladh@anyfinetworks.com
Johan Almbladh [Mon, 9 Aug 2021 09:18:26 +0000 (11:18 +0200)]
bpf, tests: Add test for 32-bit context pointer argument passing
On a 32-bit architecture, the context pointer will occupy the low
half of R1, and the other half will be zero.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210809091829.810076-12-johan.almbladh@anyfinetworks.com
Johan Almbladh [Mon, 9 Aug 2021 09:18:25 +0000 (11:18 +0200)]
bpf, tests: Add branch conversion JIT test
Some JITs may need to convert a conditional jump instruction to
to short PC-relative branch and a long unconditional jump, if the
PC-relative offset exceeds offset field width in the CPU instruction.
This test triggers such branch conversion on the 32-bit MIPS JIT.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210809091829.810076-11-johan.almbladh@anyfinetworks.com
Johan Almbladh [Mon, 9 Aug 2021 09:18:24 +0000 (11:18 +0200)]
bpf, tests: Add word-order tests for load/store of double words
A double word (64-bit) load/store may be implemented as two successive
32-bit operations, one for each word. Check that the order of those
operations is consistent with the machine endianness.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210809091829.810076-10-johan.almbladh@anyfinetworks.com
Johan Almbladh [Mon, 9 Aug 2021 09:18:23 +0000 (11:18 +0200)]
bpf, tests: Add tests for ALU operations implemented with function calls
32-bit JITs may implement complex ALU64 instructions using function calls.
The new tests check aspects related to this, such as register clobbering
and register argument re-ordering.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210809091829.810076-9-johan.almbladh@anyfinetworks.com
Johan Almbladh [Mon, 9 Aug 2021 09:18:22 +0000 (11:18 +0200)]
bpf, tests: Add more ALU64 BPF_MUL tests
This patch adds BPF_MUL tests for 64x32 and 64x64 multiply. Mainly
testing 32-bit JITs that implement ALU64 operations with two 32-bit
CPU registers per operand.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210809091829.810076-8-johan.almbladh@anyfinetworks.com
Johan Almbladh [Mon, 9 Aug 2021 09:18:21 +0000 (11:18 +0200)]
bpf, tests: Add more BPF_LSH/RSH/ARSH tests for ALU64
This patch adds a number of tests for BPF_LSH, BPF_RSH amd BPF_ARSH
ALU64 operations with values that may trigger different JIT code paths.
Mainly testing 32-bit JITs that implement ALU64 operations with two
32-bit CPU registers per operand.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210809091829.810076-7-johan.almbladh@anyfinetworks.com
Johan Almbladh [Mon, 9 Aug 2021 09:18:20 +0000 (11:18 +0200)]
bpf, tests: Add more ALU32 tests for BPF_LSH/RSH/ARSH
This patch adds more tests of ALU32 shift operations BPF_LSH and BPF_RSH,
including the special case of a zero immediate. Also add corresponding
BPF_ARSH tests which were missing for ALU32.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210809091829.810076-6-johan.almbladh@anyfinetworks.com
Johan Almbladh [Mon, 9 Aug 2021 09:18:19 +0000 (11:18 +0200)]
bpf, tests: Add more tests of ALU32 and ALU64 bitwise operations
This patch adds tests of BPF_AND, BPF_OR and BPF_XOR with different
magnitude of the immediate value. Mainly checking 32-bit JIT sub-word
handling and zero/sign extension.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210809091829.810076-5-johan.almbladh@anyfinetworks.com
Johan Almbladh [Mon, 9 Aug 2021 09:18:18 +0000 (11:18 +0200)]
bpf, tests: Fix typos in test case descriptions
This patch corrects the test description in a number of cases where
the description differed from what was actually tested and expected.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210809091829.810076-4-johan.almbladh@anyfinetworks.com
Johan Almbladh [Mon, 9 Aug 2021 09:18:17 +0000 (11:18 +0200)]
bpf, tests: Add BPF_MOV tests for zero and sign extension
Tests for ALU32 and ALU64 MOV with different sizes of the immediate
value. Depending on the immediate field width of the native CPU
instructions, a JIT may generate code differently depending on the
immediate value. Test that zero or sign extension is performed as
expected. Mainly for JIT testing.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210809091829.810076-3-johan.almbladh@anyfinetworks.com
Johan Almbladh [Mon, 9 Aug 2021 09:18:16 +0000 (11:18 +0200)]
bpf, tests: Add BPF_JMP32 test cases
An eBPF JIT may implement JMP32 operations in a different way than JMP,
especially on 32-bit architectures. This patch adds a series of tests
for JMP32 operations, mainly for testing JITs.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210809091829.810076-2-johan.almbladh@anyfinetworks.com
Muhammad Falak R Wani [Mon, 9 Aug 2021 07:00:46 +0000 (12:30 +0530)]
samples, bpf: Add an explict comment to handle nested vlan tagging.
A codeblock for handling nested vlan trips newbies into thinking it as
duplicate code. Explicitly add a comment to clarify.
Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210809070046.32142-1-falakreyaz@gmail.com
Jakub Kicinski [Mon, 9 Aug 2021 22:49:03 +0000 (15:49 -0700)]
Merge branch 'add-frag-page-support-in-page-pool'
Yunsheng Lin says:
====================
add frag page support in page pool
This patchset adds frag page support in page pool and
enable skb's page frag recycling based on page pool in
hns3 drvier.
====================
Link: https://lore.kernel.org/r/1628217982-53533-1-git-send-email-linyunsheng@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yunsheng Lin [Fri, 6 Aug 2021 02:46:22 +0000 (10:46 +0800)]
net: hns3: support skb's frag page recycling based on page pool
This patch adds skb's frag page recycling support based on
the frag page support in page pool.
The performance improves above 10~20% for single thread iperf
TCP flow with IOMMU disabled when iperf server and irq/NAPI
have a different CPU.
The performance improves about 135%(14Gbit to 33Gbit) for single
thread iperf TCP flow when IOMMU is in strict mode and iperf
server shares the same cpu with irq/NAPI.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yunsheng Lin [Fri, 6 Aug 2021 02:46:21 +0000 (10:46 +0800)]
page_pool: add frag page recycling support in page pool
Currently page pool only support page recycling when there
is only one user of the page, and the split page reusing
implemented in the most driver can not use the page pool as
bing-pong way of reusing requires the multi user support in
page pool.
Those reusing or recycling has below limitations:
1. page from page pool can only be used be one user in order
for the page recycling to happen.
2. Bing-pong way of reusing in most driver does not support
multi desc using different part of the same page in order
to save memory.
So add multi-users support and frag page recycling in page
pool to overcome the above limitation.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yunsheng Lin [Fri, 6 Aug 2021 02:46:20 +0000 (10:46 +0800)]
page_pool: add interface to manipulate frag count in page pool
For 32 bit systems with 64 bit dma, dma_addr[1] is used to
store the upper 32 bit dma addr, those system should be rare
those days.
For normal system, the dma_addr[1] in 'struct page' is not
used, so we can reuse dma_addr[1] for storing frag count,
which means how many frags this page might be splited to.
In order to simplify the page frag support in the page pool,
the PAGE_POOL_DMA_USE_PP_FRAG_COUNT macro is added to indicate
the 32 bit systems with 64 bit dma, and the page frag support
in page pool is disabled for such system.
The newly added page_pool_set_frag_count() is called to reserve
the maximum frag count before any page frag is passed to the
user. The page_pool_atomic_sub_frag_count_return() is called
when user is done with the page frag.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yunsheng Lin [Fri, 6 Aug 2021 02:46:19 +0000 (10:46 +0800)]
page_pool: keep pp info as long as page pool owns the page
Currently, page->pp is cleared and set everytime the page
is recycled, which is unnecessary.
So only set the page->pp when the page is added to the page
pool and only clear it when the page is released from the
page pool.
This is also a preparation to support allocating frag page
in page pool.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jussi Maki [Sat, 31 Jul 2021 05:57:38 +0000 (05:57 +0000)]
selftests/bpf: Add tests for XDP bonding
Add a test suite to test XDP bonding implementation over a pair of
veth devices.
Signed-off-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210731055738.16820-8-joamaki@gmail.com
Jussi Maki [Sat, 31 Jul 2021 05:57:37 +0000 (05:57 +0000)]
selftests/bpf: Fix xdp_tx.c prog section name
The program type cannot be deduced from 'tx' which causes an invalid
argument error when trying to load xdp_tx.o using the skeleton.
Rename the section name to "xdp" so that libbpf can deduce the type.
Signed-off-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210731055738.16820-7-joamaki@gmail.com
Jussi Maki [Sat, 31 Jul 2021 05:57:36 +0000 (05:57 +0000)]
net, core: Allow netdev_lower_get_next_private_rcu in bh context
For the XDP bonding slave lookup to work in the NAPI poll context in which
the redudant rcu_read_lock() has been removed we have to follow the same
approach as in
694cea395fde ("bpf: Allow RCU-protected lookups to happen
from bh context") and modify the WARN_ON to also check rcu_read_lock_bh_held().
Signed-off-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210731055738.16820-6-joamaki@gmail.com
Jussi Maki [Sat, 31 Jul 2021 05:57:35 +0000 (05:57 +0000)]
bpf, devmap: Exclude XDP broadcast to master device
If the ingress device is bond slave, do not broadcast back through it or
the bond master.
Signed-off-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210731055738.16820-5-joamaki@gmail.com
Jussi Maki [Sat, 31 Jul 2021 05:57:34 +0000 (05:57 +0000)]
net, bonding: Add XDP support to the bonding driver
XDP is implemented in the bonding driver by transparently delegating
the XDP program loading, removal and xmit operations to the bonding
slave devices. The overall goal of this work is that XDP programs
can be attached to a bond device *without* any further changes (or
awareness) necessary to the program itself, meaning the same XDP
program can be attached to a native device but also a bonding device.
Semantics of XDP_TX when attached to a bond are equivalent in such
setting to the case when a tc/BPF program would be attached to the
bond, meaning transmitting the packet out of the bond itself using one
of the bond's configured xmit methods to select a slave device (rather
than XDP_TX on the slave itself). Handling of XDP_TX to transmit
using the configured bonding mechanism is therefore implemented by
rewriting the BPF program return value in bpf_prog_run_xdp. To avoid
performance impact this check is guarded by a static key, which is
incremented when a XDP program is loaded onto a bond device. This
approach was chosen to avoid changes to drivers implementing XDP. If
the slave device does not match the receive device, then XDP_REDIRECT
is transparently used to perform the redirection in order to have
the network driver release the packet from its RX ring. The bonding
driver hashing functions have been refactored to allow reuse with
xdp_buff's to avoid code duplication.
The motivation for this change is to enable use of bonding (and
802.3ad) in hairpinning L4 load-balancers such as [1] implemented with
XDP and also to transparently support bond devices for projects that
use XDP given most modern NICs have dual port adapters. An alternative
to this approach would be to implement 802.3ad in user-space and
implement the bonding load-balancing in the XDP program itself, but
is rather a cumbersome endeavor in terms of slave device management
(e.g. by watching netlink) and requires separate programs for native
vs bond cases for the orchestrator. A native in-kernel implementation
overcomes these issues and provides more flexibility.
Below are benchmark results done on two machines with 100Gbit
Intel E810 (ice) NIC and with 32-core 3970X on sending machine, and
16-core 3950X on receiving machine. 64 byte packets were sent with
pktgen-dpdk at full rate. Two issues [2, 3] were identified with the
ice driver, so the tests were performed with iommu=off and patch [2]
applied. Additionally the bonding round robin algorithm was modified
to use per-cpu tx counters as high CPU load (50% vs 10%) and high rate
of cache misses were caused by the shared rr_tx_counter (see patch
2/3). The statistics were collected using "sar -n dev -u 1 10". On top
of that, for ice, further work is in progress on improving the XDP_TX
numbers [4].
-----------------------| CPU |--| rxpck/s |--| txpck/s |----
without patch (1 dev):
XDP_DROP: 3.15% 48.6Mpps
XDP_TX: 3.12% 18.3Mpps 18.3Mpps
XDP_DROP (RSS): 9.47% 116.5Mpps
XDP_TX (RSS): 9.67% 25.3Mpps 24.2Mpps
-----------------------
with patch, bond (1 dev):
XDP_DROP: 3.14% 46.7Mpps
XDP_TX: 3.15% 13.9Mpps 13.9Mpps
XDP_DROP (RSS): 10.33% 117.2Mpps
XDP_TX (RSS): 10.64% 25.1Mpps 24.0Mpps
-----------------------
with patch, bond (2 devs):
XDP_DROP: 6.27% 92.7Mpps
XDP_TX: 6.26% 17.6Mpps 17.5Mpps
XDP_DROP (RSS): 11.38% 117.2Mpps
XDP_TX (RSS): 14.30% 28.7Mpps 27.4Mpps
--------------------------------------------------------------
RSS: Receive Side Scaling, e.g. the packets were sent to a range of
destination IPs.
[1]: https://cilium.io/blog/2021/05/20/cilium-110#standalonelb
[2]: https://lore.kernel.org/bpf/
20210601113236.42651-1-maciej.fijalkowski@intel.com/T/#t
[3]: https://lore.kernel.org/bpf/CAHn8xckNXci+X_Eb2WMv4uVYjO2331UWB2JLtXr_58z0Av8+8A@mail.gmail.com/
[4]: https://lore.kernel.org/bpf/
20210805230046.28715-1-maciej.fijalkowski@intel.com/T/#t
Signed-off-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Cc: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20210731055738.16820-4-joamaki@gmail.com
Jussi Maki [Sat, 31 Jul 2021 05:57:33 +0000 (05:57 +0000)]
net, core: Add support for XDP redirection to slave device
This adds the ndo_xdp_get_xmit_slave hook for transforming XDP_TX
into XDP_REDIRECT after BPF program run when the ingress device
is a bond slave.
The dev_xdp_prog_count is exposed so that slave devices can be checked
for loaded XDP programs in order to avoid the situation where both
bond master and slave have programs loaded according to xdp_state.
Signed-off-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Link: https://lore.kernel.org/bpf/20210731055738.16820-3-joamaki@gmail.com
Jussi Maki [Sat, 31 Jul 2021 05:57:32 +0000 (05:57 +0000)]
net, bonding: Refactor bond_xmit_hash for use with xdp_buff
In preparation for adding XDP support to the bonding driver
refactor the packet hashing functions to be able to work with
any linear data buffer without an skb.
Signed-off-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Link: https://lore.kernel.org/bpf/20210731055738.16820-2-joamaki@gmail.com
Leon Romanovsky [Mon, 9 Aug 2021 12:03:19 +0000 (15:03 +0300)]
devlink: Fix port_type_set function pointer check
Fix a typo when checking existence of port_type_set function pointer.
Fixes:
82564f6c706a ("devlink: Simplify devlink port API calls")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joakim Zhang [Mon, 9 Aug 2021 04:29:21 +0000 (12:29 +0800)]
net: fec: fix build error for ARCH m68k
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
make.cross ARCH=m68k m5272c3_defconfig
make.cross ARCH=m68k
drivers/net/ethernet/freescale/fec_main.c: In function 'fec_enet_eee_mode_set':
>> drivers/net/ethernet/freescale/fec_main.c:2758:33: error: 'FEC_LPI_SLEEP' undeclared (first use in this function); did you mean 'FEC_ECR_SLEEP'?
2758 | writel(sleep_cycle, fep->hwp + FEC_LPI_SLEEP);
| ^~~~~~~~~~~~~
arch/m68k/include/asm/io_no.h:25:66: note: in definition of macro '__raw_writel'
25 | #define __raw_writel(b, addr) (void)((*(__force volatile u32 *) (addr)) = (b))
| ^~~~
drivers/net/ethernet/freescale/fec_main.c:2758:2: note: in expansion of macro 'writel'
2758 | writel(sleep_cycle, fep->hwp + FEC_LPI_SLEEP);
| ^~~~~~
drivers/net/ethernet/freescale/fec_main.c:2758:33: note: each undeclared identifier is reported only once for each function it appears in
2758 | writel(sleep_cycle, fep->hwp + FEC_LPI_SLEEP);
| ^~~~~~~~~~~~~
arch/m68k/include/asm/io_no.h:25:66: note: in definition of macro '__raw_writel'
25 | #define __raw_writel(b, addr) (void)((*(__force volatile u32 *) (addr)) = (b))
| ^~~~
drivers/net/ethernet/freescale/fec_main.c:2758:2: note: in expansion of macro 'writel'
2758 | writel(sleep_cycle, fep->hwp + FEC_LPI_SLEEP);
| ^~~~~~
>> drivers/net/ethernet/freescale/fec_main.c:2759:32: error: 'FEC_LPI_WAKE' undeclared (first use in this function)
2759 | writel(wake_cycle, fep->hwp + FEC_LPI_WAKE);
| ^~~~~~~~~~~~
arch/m68k/include/asm/io_no.h:25:66: note: in definition of macro '__raw_writel'
25 | #define __raw_writel(b, addr) (void)((*(__force volatile u32 *) (addr)) = (b))
| ^~~~
drivers/net/ethernet/freescale/fec_main.c:2759:2: note: in expansion of macro 'writel'
2759 | writel(wake_cycle, fep->hwp + FEC_LPI_WAKE);
| ^~~~~~
This patch adds register definition for M5272 platform to pass build.
Fixes:
b82f8c3f1409 ("net: fec: add eee mode tx lpi support")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefan Raspl [Mon, 9 Aug 2021 08:10:14 +0000 (10:10 +0200)]
net/smc: Allow SMC-D 1MB DMB allocations
Commit
a3fe3d01bd0d7 ("net/smc: introduce sg-logic for RMBs") introduced
a restriction for RMB allocations as used by SMC-R. However, SMC-D does
not use scatter-gather lists to back its DMBs, yet it was limited by
this restriction, still.
This patch exempts SMC, but limits allocations to the maximum RMB/DMB
size respectively.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Leon Romanovsky [Sun, 8 Aug 2021 18:57:43 +0000 (21:57 +0300)]
devlink: Set device as early as possible
All kernel devlink implementations call to devlink_alloc() during
initialization routine for specific device which is used later as
a parent device for devlink_register().
Such late device assignment causes to the situation which requires us to
call to device_register() before setting other parameters, but that call
opens devlink to the world and makes accessible for the netlink users.
Any attempt to move devlink_register() to be the last call generates the
following error due to access to the devlink->dev pointer.
[ 8.758862] devlink_nl_param_fill+0x2e8/0xe50
[ 8.760305] devlink_param_notify+0x6d/0x180
[ 8.760435] __devlink_params_register+0x2f1/0x670
[ 8.760558] devlink_params_register+0x1e/0x20
The simple change of API to set devlink device in the devlink_alloc()
instead of devlink_register() fixes all this above and ensures that
prior to call to devlink_register() everything already set.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Sun, 8 Aug 2021 06:33:44 +0000 (06:33 +0000)]
wwan: mhi: Fix missing spin_lock_init() in mhi_mbim_probe()
The driver allocates the spinlock but not initialize it.
Use spin_lock_init() on it to initialize it correctly.
Fixes:
aa730a9905b7 ("net: wwan: Add MHI MBIM network driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 9 Aug 2021 09:13:32 +0000 (10:13 +0100)]
Merge branch 'iucv-next'
Karsten Graul says:
====================
net/iucv: updates 2021-08-09
Please apply the following iucv patches to netdev's net-next tree.
Remove the usage of register asm statements and replace deprecated
CPU-hotplug functions with the current version.
Use use consume_skb() instead of kfree_skb() to avoid flooding
dropwatch with false-positives, and 2 patches with cleanups.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Sebastian Andrzej Siewior [Mon, 9 Aug 2021 08:30:50 +0000 (10:30 +0200)]
net/iucv: Replace deprecated CPU-hotplug functions.
The functions get_online_cpus() and put_online_cpus() have been
deprecated during the CPU hotplug rework. They map directly to
cpus_read_lock() and cpus_read_unlock().
Replace deprecated CPU-hotplug functions with the official version.
The behavior remains unchanged.
Cc: Julian Wiedmann <jwi@linux.ibm.com>
Cc: Karsten Graul <kgraul@linux.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-s390@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiko Carstens [Mon, 9 Aug 2021 08:30:49 +0000 (10:30 +0200)]
net/iucv: get rid of register asm usage
Using register asm statements has been proven to be very error prone,
especially when using code instrumentation where gcc may add function
calls, which clobbers register contents in an unexpected way.
Therefore get rid of register asm statements in iucv code, even though
there is currently nothing wrong with it. This way we know for sure
that the above mentioned bug class won't be introduced here.
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Mon, 9 Aug 2021 08:30:48 +0000 (10:30 +0200)]
net/af_iucv: remove wrappers around iucv (de-)registration
These wrappers are just unnecessary obfuscation.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Mon, 9 Aug 2021 08:30:47 +0000 (10:30 +0200)]
net/af_iucv: clean up a try_then_request_module()
Use IS_ENABLED(CONFIG_IUCV) to determine whether the iucv_if symbol
is available, and let depmod deal with the module dependency.
This was introduced back with commit
6fcd61f7bf5d ("af_iucv: use
loadable iucv interface"). And to avoid sprinkling IS_ENABLED() over
all the code, we're keeping the indirection through pr_iucv->...().
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Mon, 9 Aug 2021 08:30:46 +0000 (10:30 +0200)]
net/af_iucv: support drop monitoring
Change the good paths to use consume_skb() instead of kfree_skb(). This
avoids flooding dropwatch with false-positives.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 9 Aug 2021 08:57:53 +0000 (09:57 +0100)]
Merge branch 'dsa-fast-ageing'
Vladimir Oltean says:
====================
DSA fast ageing fixes/improvements
These are 2 small improvements brought to the DSA fast ageing changes
merged earlier today.
Patch 1 restores the behavior for DSA drivers that don't implement the
.port_bridge_flags function (I don't think there is any breakage due
to the new behavior, but just to be sure). This came as a result of
Andrew's review.
Patch 2 reduces the number of fast ages of a port from 2 to 1 when it
leaves a bridge.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sun, 8 Aug 2021 22:56:49 +0000 (01:56 +0300)]
net: dsa: avoid fast ageing twice when port leaves a bridge
Drivers that support both the toggling of address learning and dynamic
FDB flushing (mv88e6xxx, b53, sja1105) currently need to fast-age a port
twice when it leaves a bridge:
- once, when del_nbp() calls br_stp_disable_port() which puts the port
in the BLOCKING state
- twice, when dsa_port_switchdev_unsync_attrs() calls
dsa_port_clear_brport_flags() which disables address learning
The knee-jerk reaction might be to say "dsa_port_clear_brport_flags does
not need to fast-age the port at all", but the thing is, we still need
both code paths to flush the dynamic FDB entries in different situations.
When a DSA switch port leaves a bonding/team interface that is (still) a
bridge port, no del_nbp() will be called, so we rely on
dsa_port_clear_brport_flags() function to restore proper standalone port
functionality with address learning disabled.
So the solution is just to avoid double the work when both code paths
are called in series. Luckily, DSA already caches the STP port state, so
we can skip flushing the dynamic FDB when we disable address learning
and the STP state is one where no address learning takes place at all.
Under that condition, not flushing the FDB is safe because there is
supposed to not be any dynamic FDB entry at all (they were flushed
during the transition towards that state, and none were learned in the
meanwhile).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sun, 8 Aug 2021 22:56:48 +0000 (01:56 +0300)]
net: dsa: still fast-age ports joining a bridge if they can't configure learning
Commit
39f32101543b ("net: dsa: don't fast age standalone ports")
assumed that all standalone ports disable address learning, but if the
switch driver implements .port_fast_age but not .port_bridge_flags (like
ksz9477, ksz8795, lantiq_gswip, lan9303), then that might not actually
be true.
So whereas before, the bridge temporarily walking us through the
BLOCKING STP state meant that the standalone ports had a checkpoint to
flush their baggage and start fresh when they join a bridge, after that
commit they no longer do.
Restore the old behavior for these drivers by checking if the switch can
toggle address learning. If it can't, disregard the "do_fast_age"
argument and unconditionally perform fast ageing on STP state changes.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Tue, 3 Aug 2021 14:47:19 +0000 (16:47 +0200)]
netfilter: x_tables: never register tables by default
For historical reasons x_tables still register tables by default in the
initial namespace.
Only newly created net namespaces add the hook on demand.
This means that the init_net always pays hook cost, even if no filtering
rules are added (e.g. only used inside a single netns).
Note that the hooks are added even when 'iptables -L' is called.
This is because there is no way to tell 'iptables -A' and 'iptables -L'
apart at kernel level.
The only solution would be to register the table, but delay hook
registration until the first rule gets added (or policy gets changed).
That however means that counters are not hooked either, so 'iptables -L'
would always show 0-counters even when traffic is flowing which might be
unexpected.
This keeps table and hook registration consistent with what is already done
in non-init netns: first iptables(-save) invocation registers both table
and hooks.
This applies the same solution adopted for ebtables.
All tables register a template that contains the l3 family, the name
and a constructor function that is called when the initial table has to
be added.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
David S. Miller [Sun, 8 Aug 2021 19:56:52 +0000 (20:56 +0100)]
Merge branch 'sja1105-fast-ageing'
Vladimir Oltean says:
====================
Fast ageing support for SJA1105 DSA driver
While adding support for flushing dynamically learned FDB entries in the
sja1105 driver, I noticed a few things that could be improved in DSA.
Most notably, drivers could omit a fast age when address learning is
turned off, which might mean that ports leaving a bridge and becoming
standalone could still have FDB entries pointing towards them. Secondly,
when DSA fast ages a port after the 'learning' flag has been turned off,
the software bridge still has the dynamically learned 'master' FDB
entries installed, and those should be deleted too.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sun, 8 Aug 2021 14:35:27 +0000 (17:35 +0300)]
net: dsa: sja1105: add FDB fast ageing support
Delete the dynamically learned FDB entries when the STP state changes
and when address learning is disabled.
On sja1105 there is no shorthand SPI command for this, so we need to
walk through the entire FDB to delete.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sun, 8 Aug 2021 14:35:26 +0000 (17:35 +0300)]
net: dsa: sja1105: rely on DSA core tracking of port learning state
Now that DSA keeps track of the port learning state, it becomes
superfluous to keep an additional variable with this information in the
sja1105 driver. Remove it.
The DSA core's learning state is present in struct dsa_port *dp.
To avoid the antipattern where we iterate through a DSA switch's
ports and then call dsa_to_port to obtain the "dp" reference (which is
bad because dsa_to_port iterates through the DSA switch tree once
again), just iterate through the dst->ports and operate on those
directly.
The sja1105 had an extra use of priv->learn_ena on non-user ports. DSA
does not touch the learning state of those ports - drivers are free to
do what they wish on them. Mark that information with a comment in
struct dsa_port and let sja1105 set dp->learning for cascade ports.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sun, 8 Aug 2021 14:35:25 +0000 (17:35 +0300)]
net: dsa: flush the dynamic FDB of the software bridge when fast ageing a port
Currently, when DSA performs fast ageing on a port, 'bridge fdb' shows
us that the 'self' entries (corresponding to the hardware bridge, as
printed by dsa_slave_fdb_dump) are deleted, but the 'master' entries
(corresponding to the software bridge) aren't.
Indeed, searching through the bridge driver, neither the
brport_attr_learning handler nor the IFLA_BRPORT_LEARNING handler call
br_fdb_delete_by_port. However, br_stp_disable_port does, which is one
of the paths which DSA uses to trigger a fast ageing process anyway.
There is, however, one other very promising caller of
br_fdb_delete_by_port, and that is the bridge driver's handler of the
SWITCHDEV_FDB_FLUSH_TO_BRIDGE atomic notifier. Currently the s390/qeth
HiperSockets card driver is the only user of this.
I can't say I understand that driver's architecture or interaction with
the bridge, but it appears to not be a switchdev driver in the traditional
sense of the word. Nonetheless, the mechanism it provides is a useful
way for DSA to express the fact that it performs fast ageing too, in a
way that does not change the existing behavior for other drivers.
Cc: Alexandra Winter <wintera@linux.ibm.com>
Cc: Julian Wiedmann <jwi@linux.ibm.com>
Cc: Roopa Prabhu <roopa@nvidia.com>
Cc: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sun, 8 Aug 2021 14:35:24 +0000 (17:35 +0300)]
net: dsa: don't fast age bridge ports with learning turned off
On topology changes, stations that were dynamically learned on ports
that are no longer part of the active topology must be flushed - this is
described by clause "17.11 Updating learned station location information"
of IEEE 802.1D-2004.
However, when address learning on the bridge port is turned off in the
first place, there is nothing to flush, so skip a potentially expensive
operation.
We can finally do this now since DSA is aware of the learning state of
its bridged ports.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sun, 8 Aug 2021 14:35:23 +0000 (17:35 +0300)]
net: dsa: centralize fast ageing when address learning is turned off
Currently DSA leaves it down to device drivers to fast age the FDB on a
port when address learning is disabled on it. There are 2 reasons for
doing that in the first place:
- when address learning is disabled by user space, through
IFLA_BRPORT_LEARNING or the brport_attr_learning sysfs, what user
space typically wants to achieve is to operate in a mode with no
dynamic FDB entry on that port. But if the port is already up, some
addresses might have been already learned on it, and it seems silly to
wait for 5 minutes for them to expire until something useful can be
done.
- when a port leaves a bridge and becomes standalone, DSA turns off
address learning on it. This also has the nice side effect of flushing
the dynamically learned bridge FDB entries on it, which is a good idea
because standalone ports should not have bridge FDB entries on them.
We let drivers manage fast ageing under this condition because if DSA
were to do it, it would need to track each port's learning state, and
act upon the transition, which it currently doesn't.
But there are 2 reasons why doing it is better after all:
- drivers might get it wrong and not do it (see b53_port_set_learning)
- we would like to flush the dynamic entries from the software bridge
too, and letting drivers do that would be another pain point
So track the port learning state and trigger a fast age process
automatically within DSA.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jun Miao [Sat, 7 Aug 2021 15:41:40 +0000 (23:41 +0800)]
atm: horizon: Fix spelling mistakes in TX comment
It's "must not", not "musn't", meaning "shall not".
Let's fix that.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Jun Miao <jun.miao@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Leon Romanovsky [Sun, 8 Aug 2021 11:41:21 +0000 (14:41 +0300)]
devlink: Simplify devlink port API calls
Devlink port already has pointer to the devlink instance and all API
calls that forward these devlink ports to the drivers perform same
"devlink_port->devlink" assignment before actual call.
This patch removes useless parameter and allows us in the future
to create specific devlink_port_ops to manage user space access with
reliable ops assignment.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sun, 8 Aug 2021 11:16:37 +0000 (14:16 +0300)]
net: dsa: don't fast age standalone ports
DSA drives the procedure to flush dynamic FDB entries from a port based
on the change of STP state: whenever we go from a state where address
learning is enabled (LEARNING, FORWARDING) to a state where it isn't
(LISTENING, BLOCKING, DISABLED), we need to flush the existing dynamic
entries.
However, there are cases when this is not needed. Internally, when a
DSA switch interface is not under a bridge, DSA still keeps it in the
"FORWARDING" STP state. And when that interface joins a bridge, the
bridge will meticulously iterate that port through all STP states,
starting with BLOCKING and ending with FORWARDING. Because there is a
state transition from the standalone version of FORWARDING into the
temporary BLOCKING bridge port state, DSA calls the fast age procedure.
Since commit
5e38c15856e9 ("net: dsa: configure better brport flags when
ports leave the bridge"), DSA asks standalone ports to disable address
learning. Therefore, there can be no dynamic FDB entries on a standalone
port. Therefore, it does not make sense to flush dynamic FDB entries on
one.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cai Huoqing [Sat, 7 Aug 2021 05:43:36 +0000 (13:43 +0800)]
net: bonding: bond_alb: Remove the dependency on ipx network layer
commit <
47595e32869f> ("<MAINTAINERS: Mark some staging directories>")
indicated the ipx network layer as obsolete in Jan 2018,
updated in the MAINTAINERS file
now, after being exposed for 3 years to refactoring,
so to delete the ipx net layer related code for good.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nathan Chancellor [Fri, 6 Aug 2021 19:13:40 +0000 (12:13 -0700)]
net: ethernet: stmmac: Do not use unreachable() in ipq806x_gmac_probe()
When compiling with clang in certain configurations, an objtool warning
appears:
drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.o: warning: objtool:
ipq806x_gmac_probe() falls through to next function phy_modes()
This happens because the unreachable annotation in the third switch
statement is not eliminated. The compiler should know that the first
default case would prevent the second and third from being reached as
the comment notes but sanitizer options can make it harder for the
compiler to reason this out.
Help the compiler out by eliminating the unreachable() annotation and
unifying the default case error handling so that there is no objtool
warning, the meaning of the code stays the same, and there is less
duplication.
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 7 Aug 2021 08:44:02 +0000 (09:44 +0100)]
Merge branch 's390-qeth'
Karsten Graul says:
====================
s390/qeth: Add bridge to switchdev LEARNING_SYNC
The netlink bridgeport attribute LEARNING_SYNC can be used to enable
qeth interfaces to report MAC addresses that are reachable via this
qeth interface to the attached software bridge via switchdev
notifiers SWITCHDEV_FDB_ADD_TO_BRIDGE and SWITCHDEV_FDB_DEL_TO_BRIDGE.
Extend this support of LEARNING_SYNC to the bridge to switchdev notifiers
SWITCHDEV_FDB_ADD_TO_DEVICE and SWITCHDEV_FDB_DEL_TO_DEVICE.
Add the capability to sync MAC addresses that are learned by a
north-facing, non-isolated bridgeport of a software bridge to
south-facing, isolated bridgeports. This enables the software bridge to
influence south to north traffic steering in hardware.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexandra Winter [Fri, 6 Aug 2021 15:26:03 +0000 (17:26 +0200)]
s390/qeth: Update MACs of LEARNING_SYNC device
Update the MAC addresses that are registered with a LEARNING_SYNC qeth
device with the events announced by the attached software bridge.
Typically the LEARNING_SYNC qeth bridge port has an isolated sibling (the
default interface of an 'HiperSockets Converged Interface' (HSCI)). Update
the MACs of isolated siblings as well, to avoid unnecessary flooding in
the attached virtualized switches.
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexandra Winter [Fri, 6 Aug 2021 15:26:02 +0000 (17:26 +0200)]
s390/qeth: Switchdev event handler
QETH HiperSockets devices with LEARNING_SYNC capability can be used
to construct a linux bridge with:
2 isolated southbound interfaces:
a) a default network interface
b) a LEARNING-SYNC HiperSockets interface
and 1 non-isolated northbound interface. This is called a 'HiperSockets
Converged Interface' (HSCI).
The existing LEARNING_SYNC functionality is used to update the bridge fdb
with MAC addresses that should be sent-out via the HiperSockets interface,
instead of the default network interface.
Add handling of switchdev events SWITCHDEV_FDB_ADD_TO_DEVICE and
SWITCHDEV_FDB_DEL_TO_DEVICE to the qeth LEARNING_SYNC functionality. Thus
if the northbound bridgeport of an HSCI doesn't only have a single static
MAC address, but instead is a learning bridgeport, work is enqueued, so
the HiperSockets virtual switch (that is external to this Linux instance)
can update its fdb.
When BRIDGE is a loadable module, QETH_L2 mustn't be built-in:
drivers/s390/net/qeth_l2_main.o: in function 'qeth_l2_switchdev_event':
drivers/s390/net/qeth_l2_main.c:927: undefined reference to
'br_port_flag_is_set'
Add Kconfig dependency to enforce usable configurations.
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexandra Winter [Fri, 6 Aug 2021 15:26:01 +0000 (17:26 +0200)]
s390/qeth: Register switchdev event handler
Conditionally register a qeth_l2 switchdev_event handler to handle bridge
to device switchdev events, when at least one qeth interface has the
bridgeport attribute LEARNING_SYNC enabled.
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Fri, 6 Aug 2021 12:49:32 +0000 (13:49 +0100)]
tulip: Remove deadcode on startup true condition
The true check on the variable startable in the ternary operator
is always false because the previous if statement handles the true
condition for startable. Hence the ternary check is dead code and
can be removed.
Addresses-Coverity: ("Logically dead code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrii Nakryiko [Fri, 6 Aug 2021 23:53:27 +0000 (16:53 -0700)]
Merge branch 'samples/bpf: xdpsock: Minor enhancements'
Simon Horman says:
====================
This short series provides minor enhancements to the
sample code in samples/bpf/xdpsock_user.c.
Each change is explained more fully in its own commit message.
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Niklas Söderlund [Fri, 6 Aug 2021 12:28:55 +0000 (14:28 +0200)]
samples/bpf: xdpsock: Remove forward declaration of ip_fast_csum()
There is a forward declaration of ip_fast_csum() just before its
implementation, remove the unneeded forward declaration.
While at it mark the implementation as static inline.
Signed-off-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Link: https://lore.kernel.org/bpf/20210806122855.26115-3-simon.horman@corigine.com
Niklas Söderlund [Fri, 6 Aug 2021 12:28:54 +0000 (14:28 +0200)]
samples/bpf: xdpsock: Make the sample more useful outside the tree
The xdpsock sample application is a useful base for experiment's around
AF_XDP sockets. Compiling the sample outside of the kernel tree is made
harder then it has to be as the sample includes two headers and that are
not installed by 'make install_header' nor are usually part of
distributions kernel headers.
The first header asm/barrier.h is not used and can just be dropped.
The second linux/compiler.h are only needed for the decorator __force
and are only used in ip_fast_csum(), csum_fold() and
csum_tcpudp_nofold(). These functions are copied verbatim from
include/asm-generic/checksum.h and lib/checksum.c. While it's fine to
copy and use these functions in the sample application the decorator
brings no value and can be dropped together with the include.
With this change it's trivial to compile the xdpsock sample outside the
kernel tree from xdpsock_user.c and xdpsock.h.
$ gcc -o xdpsock xdpsock_user.c -lbpf -lpthread
Signed-off-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Link: https://lore.kernel.org/bpf/20210806122855.26115-2-simon.horman@corigine.com
Grygorii Strashko [Fri, 6 Aug 2021 14:28:09 +0000 (17:28 +0300)]
net: ethernet: ti: davinci_cpdma: revert "drop frame padding"
This reverts commit
9ffc513f95ee ("net: ethernet: ti: davinci_cpdma: drop
frame padding") which has depndency from not yet merged patch [1] and so
breaks cpsw_new driver.
[1] https://patchwork.kernel.org/project/netdevbpf/patch/
20210805145511.12016-1-grygorii.strashko@ti.com/
Fixes:
9ffc513f95ee ("net: ethernet: ti: davinci_cpdma: drop frame padding")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20210806142809.15069-1-grygorii.strashko@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dan Carpenter [Fri, 6 Aug 2021 15:04:35 +0000 (18:04 +0300)]
vrf: fix NULL dereference in vrf_finish_output()
The "skb" pointer is NULL on this error path so we can't dereference it.
Use "dev" instead.
Fixes:
14ee70ca89e6 ("vrf: use skb_expand_head in vrf_finish_output")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20210806150435.GB15586@kili
Signed-off-by: Jakub Kicinski <kuba@kernel.org>