Dariusz Marcinkiewicz [Mon, 22 Jun 2020 11:46:36 +0000 (13:46 +0200)]
media: cros-ec-cec: do not bail on device_init_wakeup failure
Do not fail probing when device_init_wakeup fails.
device_init_wakeup fails when the device is already enabled as wakeup
device. Hence, the driver fails to probe the device if:
- The device has already been enabled for wakeup (by e.g. sysfs)
- The driver has been unloaded and is being loaded again.
This goal of the patch is to fix the above cases.
Overwhelming majority of the drivers do not check device_init_wakeup
return code.
Fixes:
cd70de2d356ee ("media: platform: Add ChromeOS EC CEC driver")
Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Paul Kocialkowski [Thu, 30 Apr 2020 16:42:45 +0000 (18:42 +0200)]
media: rockchip: rga: Only set output CSC mode for RGB input
Setting the output CSC mode is required for a YUV output, but must not
be set when the input is also YUV. Doing this (as tested with a YUV420P
to YUV420P conversion) results in wrong colors.
Adapt the logic to only set the output CSC mode when the output is YUV and
the input is RGB. Also add a comment to clarify the rationale.
Fixes:
f7e7b48e6d79 ("[media] rockchip/rga: v4l2 m2m support")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Paul Kocialkowski [Thu, 30 Apr 2020 16:42:44 +0000 (18:42 +0200)]
media: rockchip: rga: Introduce color fmt macros and refactor CSC mode logic
This introduces two macros: RGA_COLOR_FMT_IS_YUV and RGA_COLOR_FMT_IS_RGB
which allow quick checking of the colorspace familily of a RGA color format.
These macros are then used to refactor the logic for CSC mode selection.
The two nested tests for input colorspace are simplified into a single one,
with a logical and, making the whole more readable.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Chuhong Yuan [Thu, 28 May 2020 06:41:47 +0000 (08:41 +0200)]
media: exynos4-is: Add missed check for pinctrl_lookup_state()
fimc_md_get_pinctrl() misses a check for pinctrl_lookup_state().
Add the missed check to fix it.
Fixes:
4163851f7b99 ("[media] s5p-fimc: Use pinctrl API for camera ports configuration]")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dafna Hirschfeld [Fri, 29 May 2020 14:03:51 +0000 (16:03 +0200)]
media: staging: rkisp1: set more precise size errors in debugfs
When a size error is signaled, it is possible to read a register
to see where the error comes from. So, in debugfs the general
error 'pic_size_err' can be replaced with 3 more precise errors.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Chuhong Yuan [Sat, 6 Jun 2020 14:39:18 +0000 (16:39 +0200)]
media: tvp5150: Add missed media_entity_cleanup()
This driver does not call media_entity_cleanup() in the error handler
of tvp5150_registered() and tvp5150_remove(), while it has called
media_entity_pads_init() at first.
Add the missed calls to fix it.
Fixes:
0556f1d580d4 ("media: tvp5150: add input source selection of_graph support")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dan Carpenter [Wed, 10 Jun 2020 17:26:15 +0000 (19:26 +0200)]
media: pxa_camera: remove an impossible condition
It's not possible for "pcdev->mclk" to be zero because we check for
that earlier and set it to
20000000 in that situation. If it were
possible, that would be a problem because it could have lead to an Oops
in the error handling when we call v4l2_clk_unregister(pcdev->mclk_clk);
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Niklas Söderlund [Thu, 11 Jun 2020 19:32:32 +0000 (21:32 +0200)]
media: rcar-csi2: Rename confirm_start() to phy_post_init() to match its usage
Since the driver was picked-up the starting of the PHY have changed
quiet a bit. An artifact of these changes is the now poorly named
callback confirm_start(). It used to confirm start of the PHY but now
performs post PHY start initialization, rename it to phy_post_init() to
reflect this.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Stanimir Varbanov [Tue, 16 Jun 2020 14:37:35 +0000 (16:37 +0200)]
media: docs: dev-decoder: Add one more reason for dynamic change
Add bit-depth change as one more reason which could change in the
middle of the stream. For the worst case the stream is 8bit at the
beginning but later in the bit-stream it changes to 10bit. That
change should be propagated to the client so that it can take the
appropriate action. In that case it has to stop the streaming on
the capture queue, re-negotiate the pixel format, allocate new
buffers and start the streaming again.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Gustavo A. R. Silva [Mon, 15 Jun 2020 21:40:15 +0000 (23:40 +0200)]
media: test_drivers: vivid-core: Use array_size() helper
The tpg_alloc() and vmalloc() functions have no 2-factor argument form, so
multiplication factors need to be wrapped in array_size().
This issue was found with the help of Coccinelle and, audited and fixed
manually.
Addresses-KSPP-ID: https://github.com/KSPP/linux/issues/83
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
John Cox [Wed, 17 Jun 2020 13:21:52 +0000 (15:21 +0200)]
media: videobuf2: Fix length check for single plane dmabuf queueing
Check against length in v4l2_buffer rather than vb2_buffer when the
buffer is a dmabuf. This makes the single plane test the same as the
existing multiplanar test.
Signed-off-by: John Cox <jc@kynesim.co.uk>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Helen Koike [Wed, 17 Jun 2020 18:08:01 +0000 (20:08 +0200)]
media: staging: rkisp1: rsz: fix resolution limitation on sink pad
Resizer sink pad is limited by what the ISP can generate.
The configurations describes what the resizer can produce.
This was tested on a Scarlet device with ChromiumOs, where the selfpath
receives 2592x1944 and produces 1600x1200 (which isn't possible without
this fix).
Fixes:
56e3b29f9f6b2 ("media: staging: rkisp1: add streaming paths")
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Krzysztof Kozlowski [Wed, 17 Jun 2020 15:27:09 +0000 (17:27 +0200)]
media: samsung: Rename Samsung and Exynos to lowercase
Fix up inconsistent usage of upper and lowercase letters in "Samsung"
and "Exynos" names.
"SAMSUNG" and "EXYNOS" are not abbreviations but regular trademarked
names. Therefore they should be written with lowercase letters starting
with capital letter.
The lowercase "Exynos" name is promoted by its manufacturer Samsung
Electronics Co., Ltd., in advertisement materials and on website.
Although advertisement materials usually use uppercase "SAMSUNG", the
lowercase version is used in all legal aspects (e.g. on Wikipedia and in
privacy/legal statements on
https://www.samsung.com/semiconductor/privacy-global/).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dafna Hirschfeld [Thu, 18 Jun 2020 11:35:18 +0000 (13:35 +0200)]
media: staging: rkisp1: rsz: set default format if the given format is not RKISP1_ISP_SD_SRC
When setting the sink format of the 'rkisp1_resizer'
the format should be supported by 'rkisp1_isp' on
the video source pad. This patch checks this condition
and sets the format to default if the condition is false.
Fixes:
56e3b29f9f6b "media: staging: rkisp1: add streaming paths"
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dafna Hirschfeld [Thu, 18 Jun 2020 11:35:17 +0000 (13:35 +0200)]
media: staging: rkisp1: rename macros 'RKISP1_DIR_*' to 'RKISP1_ISP_SD_*'
The macros 'RKISP1_DIR_*' are flags that indicate on which
pads of the isp subdevice the media bus code is supported. So the
prefix RKISP1_ISP_SD_ is better.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dafna Hirschfeld [Thu, 18 Jun 2020 11:35:16 +0000 (13:35 +0200)]
media: staging: rkisp1: remove macro RKISP1_DIR_SINK_SRC
The macro RKISP1_DIR_SINK_SRC is a mask of two flags.
The macro hides the fact that it's a mask and the code
is actually more clear if we replace it the with bitwise-or explicitly.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dafna Hirschfeld [Thu, 18 Jun 2020 11:35:15 +0000 (13:35 +0200)]
media: staging: rkisp1: rsz: supported formats are the isp's src formats, not sink formats
The rkisp1_resizer's enum callback 'rkisp1_rsz_enum_mbus_code'
calls the enum callback of the 'rkisp1_isp' on it's video sink pad.
This is a bug, the resizer should support the same formats
supported by the 'rkisp1_isp' on the source pad (not the sink pad).
Fixes:
56e3b29f9f6b "media: staging: rkisp1: add streaming paths"
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dan Carpenter [Fri, 19 Jun 2020 14:30:07 +0000 (16:30 +0200)]
media: allegro: Fix some NULL vs IS_ERR() checks in probe
The devm_ioremap() function doesn't return error pointers, it returns
NULL on error.
Fixes:
f20387dfd065 ("media: allegro: add Allegro DVT video IP core driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Laurent Pinchart [Sun, 21 Jun 2020 00:23:43 +0000 (02:23 +0200)]
media: vb2: Print the queue pointer in debug messages
When debugging issues that involve more than one video queue, messages
related to multiple queues get interleaved without any easy way to tell
which queue they relate to. Fix this by adding a queue name to
vb2_queue, and printing it in all debug messages in the vb2 core and
V4L2 layers. If the name isn't set by drivers, it is automatically
filled with the queue direction and address.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Benoit Parrot [Thu, 28 May 2020 13:26:05 +0000 (15:26 +0200)]
media: use v4l2_rect_enclosed helper
Several drivers implement the same enclosed_rectangle() function to
check if a rectangle is enclosed into another. Replace this with the
newly added v4l2_rect_enclosed() helper function.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
Reviewed-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Benoit Parrot [Thu, 28 May 2020 13:26:04 +0000 (15:26 +0200)]
media: v4l2-rect.h: add enclosed rectangle helper
Add a helper function to check if one rectangle is enclosed inside
another.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
Reviewed-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Lad Prabhakar [Wed, 27 May 2020 12:16:50 +0000 (14:16 +0200)]
media: rcar-csi2: Add support for MEDIA_BUS_FMT_SRGGB8_1X8 format
This patch adds support for MEDIA_BUS_FMT_SRGGB8_1X8 format for CSI2
input.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Lad Prabhakar [Wed, 27 May 2020 12:16:49 +0000 (14:16 +0200)]
media: rcar-vin: Add support for MEDIA_BUS_FMT_SRGGB8_1X8 format
Add support for MEDIA_BUS_FMT_SRGGB8_1X8 format in rcar-vin by setting
format type to RAW8 in VNMC register and appropriately setting the bpp
and bytesperline to enable V4L2_PIX_FMT_SRGGB8.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Lad Prabhakar [Wed, 27 May 2020 12:16:48 +0000 (14:16 +0200)]
media: rcar-vin: Invalidate pipeline if conversion is not possible on input formats
Up until now the VIN was capable to convert any of its supported input mbus
formats to any of it's supported output pixel formats. With the addition of
RAW formats this is no longer true.
This patch invalidates the pipeline by adding a check if given vin input
format can be converted to supported output pixel format.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dinghao Liu [Sun, 24 May 2020 04:31:32 +0000 (06:31 +0200)]
media: venus: venc: Fix runtime PM imbalance in venc_open
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mansur Alisha Shaik [Fri, 1 May 2020 06:28:00 +0000 (08:28 +0200)]
media: venus: fix multiple encoder crash
Currently we are considering the instances which are available
in core->inst list for load calculation in min_loaded_core()
function, but this is incorrect because by the time we call
decide_core() for second instance, the third instance not
filled yet codec_freq_data pointer.
Solve this by considering the instances whose session has started.
Cc: stable@vger.kernel.org # v5.7+
Fixes:
4ebf969375bc ("media: venus: introduce core selection")
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Evgeny Novikov [Thu, 18 Jun 2020 13:15:38 +0000 (15:15 +0200)]
media: rc: return proper error code on error handling path in init
If lirc_dev_init() fails during module initialization, rc_core_init()
returns 0 denoting success. This can cause different issues during
further operation of the module. The patch fixes the return value of
rc_core_init() on the corresponding error handling path.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sean Young [Tue, 16 Jun 2020 10:04:17 +0000 (12:04 +0200)]
media: cx23888: remove unused functions
Found with clang:
drivers/media/pci/cx23885/cx23888-ir.c:178:19: warning: unused function 'ns_to_clock_divider' [-Wunused-function]
static inline u16 ns_to_clock_divider(unsigned int ns)
^
drivers/media/pci/cx23885/cx23888-ir.c:184:28: warning: unused function 'clock_divider_to_ns' [-Wunused-function]
static inline unsigned int clock_divider_to_ns(unsigned int divider)
^
drivers/media/pci/cx23885/cx23888-ir.c:202:19: warning: unused function 'freq_to_clock_divider' [-Wunused-function]
static inline u16 freq_to_clock_divider(unsigned int freq,
^
Cc: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sean Young [Tue, 16 Jun 2020 09:54:06 +0000 (11:54 +0200)]
media: fintek-cir: remove unused function fintek_clear_reg_bit
Found with clang:
drivers/media/rc/fintek-cir.c:55:20: warning: unused function 'fintek_clear_reg_bit' [-Wunused-function]
static inline void fintek_clear_reg_bit(struct fintek_dev *fintek, u8 val, u8 reg)
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sean Young [Tue, 16 Jun 2020 09:49:42 +0000 (11:49 +0200)]
media: nuvoton-cir: remove setting tx carrier functions
Since this driver could never transmit IR, setting the tx carrier makes
no sense.
Fixes:
87284271b73b8 ("media: rc: nuvoton: remove rudimentary transmit functionality")
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sean Young [Tue, 16 Jun 2020 09:45:14 +0000 (11:45 +0200)]
media: drx-k: remove unused MulDiv32 function
This function has never been used. Found with clang:
drivers/media/dvb-frontends/drxk_hard.c:159:19: warning: unused function 'MulDiv32' [-Wunused-function]
static inline u32 MulDiv32(u32 a, u32 b, u32 c)
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Sat, 27 Jun 2020 09:35:22 +0000 (11:35 +0200)]
media: MAINTAINERS: remove SOC-CAMERA entry
After the removal of the soc_camera driver and the soc_camera.h header
the SOC-CAMERA entry in the MAINTAINERS file can also be removed.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Fri, 26 Jun 2020 13:15:24 +0000 (15:15 +0200)]
media: arch/sh/configs: remove obsolete CONFIG_SOC_CAMERA*
Drop all configs with the CONFIG_SOC_CAMERA prefix since those
have been removed.
SOC_CAMERA support for the sh architecture was removed a long time ago.
Drop it from the configs.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Fri, 26 Jun 2020 13:11:18 +0000 (15:11 +0200)]
media: arch/arm/configs: remove obsolete CONFIG_SOC_CAMERA*
Drop all configs with the CONFIG_SOC_CAMERA prefix since those
have been removed.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Fri, 26 Jun 2020 11:53:21 +0000 (13:53 +0200)]
media: soc_camera.h: remove this unused header
The soc_camera driver has been removed and all board files
that used it have been fixed. This header can now be removed
altogether.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Fri, 26 Jun 2020 11:53:20 +0000 (13:53 +0200)]
media: staging/media/soc_camera: remove this driver
The soc_camera driver (and related soc_camera-dependent sensor
drivers) is obsolete and depends on BROKEN for a long time now.
Nobody is using it, so it is time to kill it off.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Fri, 26 Jun 2020 11:53:19 +0000 (13:53 +0200)]
media: mach-pxa: palmz72/pcm990: remove soc_camera dependencies
The soc_camera driver is about to be removed, so drop camera
support from this board. Note that the soc_camera driver itself has
long since been deprecated and can't be compiled anymore (it depends
on BROKEN), so camera support on this board has been broken for a long
time (at least since 4.9 when the pxa_camera.c was removed from soc_camera).
Note that there is a new pxa_camera.c driver that replaced the old
soc_camera based driver, but using that would require these boards to
be converted to use the device tree.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Fri, 26 Jun 2020 11:53:18 +0000 (13:53 +0200)]
media: mach-omap1: board-ams-delta.c: remove soc_camera dependencies
The soc_camera driver is about to be removed, so drop camera
support from this board. Note that the soc_camera driver itself has
long since been deprecated and can't be compiled anymore (it depends
on BROKEN), so camera support on this board has been broken for a long
time (at least since 4.6 when the omap1_camera.c was removed from soc_camera).
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Tony Lindgren <tony@atomide.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Fri, 26 Jun 2020 11:53:17 +0000 (13:53 +0200)]
media: mach-imx: mach-imx27_visstrim_m10.c: remove soc_camera dependencies
The soc_camera.h header driver is about to be removed, so drop camera
support from this board. Note that the soc_camera driver itself has
long since been deprecated and can't be compiled anymore (it depends
on BROKEN), so camera support on this board has been broken for a long
time (at least since 4.6 when the mx2_camera.c was removed from soc_camera).
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Fri, 26 Jun 2020 11:53:16 +0000 (13:53 +0200)]
media: pxa_camera: update MODULE_DESCRIPTION
Remove the confusing SoC Camera reference.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Fri, 26 Jun 2020 11:53:15 +0000 (13:53 +0200)]
media: ov9640: update MODULE_DESCRIPTION
Remove the confusing SoC Camera reference.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Jeff Chase [Mon, 22 Jun 2020 23:59:50 +0000 (01:59 +0200)]
media: cec: i2c: ch7322: Add ch7322 CEC controller driver
Add a CEC device driver for the Chrontel ch7322 CEC conroller.
This is an I2C device capable of sending and receiving CEC messages.
Signed-off-by: Jeff Chase <jnchase@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Jeff Chase [Mon, 22 Jun 2020 23:59:49 +0000 (01:59 +0200)]
media: cec: add adap_controls_phys_addr option
Use of the cec notifier framework is required to support
CEC_CAP_CONNECTOR_INFO but some devices do not want physical address
updates from the notifier. This adds an option to allow registering
with a cec notifier without getting address updates.
[hans: document the new adap_controls_phys_addr bool]
Signed-off-by: Jeff Chase <jnchase@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Jeff Chase [Mon, 22 Jun 2020 23:59:48 +0000 (01:59 +0200)]
media: dt-bindings: Add ch7322 media i2c device
The ch7322 is a Chrontel CEC controller.
Signed-off-by: Jeff Chase <jnchase@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Eugeniu Rosca [Tue, 2 Jun 2020 19:50:16 +0000 (21:50 +0200)]
media: vsp1: dl: Fix NULL pointer dereference on unbind
In commit
f3b98e3c4d2e16 ("media: vsp1: Provide support for extended
command pools"), the vsp pointer used for referencing the VSP1 device
structure from a command pool during vsp1_dl_ext_cmd_pool_destroy() was
not populated.
Correctly assign the pointer to prevent the following
null-pointer-dereference when removing the device:
[*] h3ulcb-kf #>
echo
fea28000.vsp > /sys/bus/platform/devices/
fea28000.vsp/driver/unbind
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000028
Mem abort info:
ESR = 0x96000006
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000006
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=
00000007318be000
[
0000000000000028] pgd=
00000007333a1003, pud=
00000007333a6003, pmd=
0000000000000000
Internal error: Oops:
96000006 [#1] PREEMPT SMP
Modules linked in:
CPU: 1 PID: 486 Comm: sh Not tainted 5.7.0-rc6-arm64-renesas-00118-ge644645abf47 #185
Hardware name: Renesas H3ULCB Kingfisher board based on r8a77951 (DT)
pstate:
40000005 (nZcv daif -PAN -UAO)
pc : vsp1_dlm_destroy+0xe4/0x11c
lr : vsp1_dlm_destroy+0xc8/0x11c
sp :
ffff800012963b60
x29:
ffff800012963b60 x28:
ffff0006f83fc440
x27:
0000000000000000 x26:
ffff0006f5e13e80
x25:
ffff0006f5e13ed0 x24:
ffff0006f5e13ed0
x23:
ffff0006f5e13ed0 x22:
dead000000000122
x21:
ffff0006f5e3a080 x20:
ffff0006f5df2938
x19:
ffff0006f5df2980 x18:
0000000000000003
x17:
0000000000000000 x16:
0000000000000016
x15:
0000000000000003 x14:
00000000000393c0
x13:
ffff800011a5ec18 x12:
ffff800011d8d000
x11:
ffff0006f83fcc68 x10:
ffff800011a53d70
x9 :
ffff8000111f3000 x8 :
0000000000000000
x7 :
0000000000210d00 x6 :
0000000000000000
x5 :
ffff800010872e60 x4 :
0000000000000004
x3 :
0000000078068000 x2 :
ffff800012781000
x1 :
0000000000002c00 x0 :
0000000000000000
Call trace:
vsp1_dlm_destroy+0xe4/0x11c
vsp1_wpf_destroy+0x10/0x20
vsp1_entity_destroy+0x24/0x4c
vsp1_destroy_entities+0x54/0x130
vsp1_remove+0x1c/0x40
platform_drv_remove+0x28/0x50
__device_release_driver+0x178/0x220
device_driver_detach+0x44/0xc0
unbind_store+0xe0/0x104
drv_attr_store+0x20/0x30
sysfs_kf_write+0x48/0x70
kernfs_fop_write+0x148/0x230
__vfs_write+0x18/0x40
vfs_write+0xdc/0x1c4
ksys_write+0x68/0xf0
__arm64_sys_write+0x18/0x20
el0_svc_common.constprop.0+0x70/0x170
do_el0_svc+0x20/0x80
el0_sync_handler+0x134/0x1b0
el0_sync+0x140/0x180
Code:
b40000c2 f9403a60 d2800084 a9400663 (
f9401400)
---[ end trace
3875369841fb288a ]---
Fixes:
f3b98e3c4d2e16 ("media: vsp1: Provide support for extended command pools")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Colin Ian King [Fri, 24 Apr 2020 11:25:54 +0000 (13:25 +0200)]
media: cx231xx: remove redundant assignment to variable err
The variable err is being initialized with a value that is
never read and it is being updated later with a new value. The
initialization is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Eizan Miyamoto [Thu, 7 May 2020 10:23:50 +0000 (12:23 +0200)]
media: mtk-mdp: Remove mtk_mdp_comp.id and supporting functionality
Since components are registered in a list, the numeric component id that
specified a location in an array is not necessary.
Signed-off-by: Eizan Miyamoto <eizan@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Eizan Miyamoto [Thu, 7 May 2020 10:23:48 +0000 (12:23 +0200)]
media: mtk-mdp: convert mtk_mdp_dev.comp array to list
The functions mtk_mdp_register/unregister_component have been created to
add / remove items from the list of components.
This will eventually enable us to specify a list of components in the
device tree instead of hardcoding them into this driver.
The list is modified by a single thread at driver probe time, and will
not be traversed by another thread until the call to pm_runtime_enable
at the end of probing.
Signed-off-by: Eizan Miyamoto <eizan@chromium.org>
Reviewed-by: Enric Balletbo I Serra <enric.balletbo@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Eizan Miyamoto [Thu, 7 May 2020 10:23:46 +0000 (12:23 +0200)]
media: mtk-mdp: handle vpu_wdt_reg_handler() errors during probe
This is a cleanup to better handle errors during MDP probe.
Signed-off-by: Eizan Miyamoto <eizan@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Eizan Miyamoto [Thu, 7 May 2020 10:23:44 +0000 (12:23 +0200)]
media: mtk-mdp: handle vb2_dma_contig_set_max_seg_size errors during probe
This is a cleanup to better handle errors during MDP probe.
Signed-off-by: Eizan Miyamoto <eizan@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Eizan Miyamoto [Thu, 7 May 2020 10:23:42 +0000 (12:23 +0200)]
media: mtk-mdp: remove mtk_mdp_comp.regs from mtk_mdp_comp.h
These fields are not used and can be removed.
Signed-off-by: Eizan Miyamoto <eizan@chromium.org>
Reviewed-by: Enric Balletbo I Serra <enric.balletbo@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Francois Buergisser [Wed, 6 May 2020 05:01:37 +0000 (07:01 +0200)]
media: mtk-mdp: Remove states for format checks
The mtk-mdp driver uses states to check if the formats have been set
on the capture and output when turning the streaming on, setting
controls or setting the selection rectangles.
Those states are reset when 0 buffers are requested like when checking
capabilities.
This patch removes all format checks and set one by default as queues in
V4L2 are expected to always have a format set.
https://linuxtv.org/downloads/v4l-dvb-apis/uapi/v4l/vidioc-streamon.html
https://linuxtv.org/downloads/v4l-dvb-apis/uapi/v4l/vidioc-g-ctrl.html
https://linuxtv.org/downloads/v4l-dvb-apis/uapi/v4l/vidioc-g-selection.html
Signed-off-by: Francois Buergisser <fbuergisser@chromium.org>
Signed-off-by: Eizan Miyamoto <eizan@chromium.org>
Reviewed-by: Enric Balletbo I Serra <enric.balletbo@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dan Carpenter [Fri, 8 May 2020 14:40:22 +0000 (16:40 +0200)]
media: firewire: Using uninitialized values in node_probe()
If fw_csr_string() returns -ENOENT, then "name" is uninitialized. So
then the "strlen(model_names[i]) <= name_len" is true because strlen()
is unsigned and -ENOENT is type promoted to a very high positive value.
Then the "strncmp(name, model_names[i], name_len)" uses uninitialized
data because "name" is uninitialized.
Fixes:
92374e886c75 ("[media] firedtv: drop obsolete backend abstraction")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Chen Zhou [Sat, 9 May 2020 02:07:11 +0000 (04:07 +0200)]
media: coda: jpeg: add NULL check after kmalloc
Fixes coccicheck warning:
./drivers/media/platform/coda/coda-jpeg.c:331:3-31:
alloc with no test, possible model on line 354
Add NULL check after kmalloc.
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Eugen Hristev [Fri, 12 Jun 2020 10:56:02 +0000 (12:56 +0200)]
media: atmel: atmel-sama5d2-isc: fix warning in configs without OF
All warnings (new ones prefixed by >>, old ones prefixed by <<):
>> drivers/media/platform/atmel/atmel-sama5d2-isc.c:323:34: warning: unused variable 'atmel_isc_of_match' [-Wunused-const-variable]
static const struct of_device_id atmel_isc_of_match[] = {
^
1 warning generated.
vim +/atmel_isc_of_match +323 drivers/media/platform/atmel/atmel-sama5d2-isc.c
322
> 323 static const struct of_device_id atmel_isc_of_match[] = {
324 { .compatible = "atmel,sama5d2-isc" },
325 { }
326 };
327 MODULE_DEVICE_TABLE(of, atmel_isc_of_match);
328
Fixed warning by guarding the atmel_isc_of_match by CONFIG_OF.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Gustavo A. R. Silva [Thu, 19 Mar 2020 22:23:52 +0000 (23:23 +0100)]
media: usb: pwc: pwc.h: Replace zero-length array with flexible-array member
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit
76497732932f ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Andrey Konovalov [Thu, 9 Apr 2020 11:24:04 +0000 (13:24 +0200)]
media: camss: use proper media entity function for subdevices
Currently for msm_csiphy, msm_csid, and msm_ispif subdevices the media
entity function field is set to MEDIA_ENT_F_IO_V4L. This is incorrect
as MEDIA_ENT_F_IO_V4L implies V4L2 video node.
Change it to MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER as this is the best
fit from the functions defined in include/uapi/linux/media.h.
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Tested-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dafna Hirschfeld [Fri, 15 May 2020 14:29:52 +0000 (16:29 +0200)]
media: staging: rkisp1: cap: remove support of BGR666 format
The rkisp1 supports RGB encoding with 6 bits per
color with the following format:
- - b5 b4 b3 b2 b1 b0 - - g5 g4 g3 g2 g1 g0 - - r5 r4 r3 r2 r1 r0 - - - - - - - -
This is not how V4L2_PIX_FMT_BGR666 is defined, so remove
this format from the driver's formats list.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tuomas Tynkkynen [Sun, 21 Jun 2020 11:30:40 +0000 (13:30 +0200)]
media: media-request: Fix crash if memory allocation fails
Syzbot reports a NULL-ptr deref in the kref_put() call:
BUG: KASAN: null-ptr-deref in media_request_put drivers/media/mc/mc-request.c:81 [inline]
kref_put include/linux/kref.h:64 [inline]
media_request_put drivers/media/mc/mc-request.c:81 [inline]
media_request_close+0x4d/0x170 drivers/media/mc/mc-request.c:89
__fput+0x2ed/0x750 fs/file_table.c:281
task_work_run+0x147/0x1d0 kernel/task_work.c:123
tracehook_notify_resume include/linux/tracehook.h:188 [inline]
exit_to_usermode_loop arch/x86/entry/common.c:165 [inline]
prepare_exit_to_usermode+0x48e/0x600 arch/x86/entry/common.c:196
What led to this crash was an injected memory allocation failure in
media_request_alloc():
FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 0
should_failslab+0x5/0x20
kmem_cache_alloc_trace+0x57/0x300
? anon_inode_getfile+0xe5/0x170
media_request_alloc+0x339/0x440
media_device_request_alloc+0x94/0xc0
media_device_ioctl+0x1fb/0x330
? do_vfs_ioctl+0x6ea/0x1a00
? media_ioctl+0x101/0x120
? __media_device_usb_init+0x430/0x430
? media_poll+0x110/0x110
__se_sys_ioctl+0xf9/0x160
do_syscall_64+0xf3/0x1b0
When that allocation fails, filp->private_data is left uninitialized
which media_request_close() does not expect and crashes.
To avoid this, reorder media_request_alloc() such that
allocating the struct file happens as the last step thus
media_request_close() will no longer get called for a partially created
media request.
Reported-by: syzbot+6bed2d543cf7e48b822b@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Fixes:
10905d70d788 ("media: media-request: implement media requests")
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Qingwu Zhang [Fri, 12 Jun 2020 09:42:02 +0000 (11:42 +0200)]
media: ov2740: add NVMEM interface to read customized OTP data
ov2740 includes 512bytes of one-time programmable memory and
256 bytes are reserved for customers which can be used to store
customized information. This patch provide an NVMEM interface
to support read out the customized data in OTP.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Qingwu Zhang <qingwu.zhang@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Andrey Konovalov [Fri, 12 Jun 2020 13:53:55 +0000 (15:53 +0200)]
media: i2c: imx290: set bus_type before calling v4l2_fwnode_endpoint_alloc_parse()
The bus_type field of v4l2_fwnode_endpoint structure passed as the argument
to v4l2_fwnode_endpoint_alloc_parse() function must be initiaized.
Set it to V4L2_MBUS_CSI2_DPHY, and check for -ENXIO which is returned
when the requested media bus type doesn't match the fwnode.
Also remove v4l2_fwnode_endpoint field from struct imx290 as it is only
needed in the probe function: use the local variable for this purpose.
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Manivannan Sadhasivam [Fri, 12 Jun 2020 13:53:54 +0000 (15:53 +0200)]
media: i2c: imx290: Move the settle time delay out of loop
The 10ms settle time is needed only at the end of all consecutive
register writes. So move the delay to outside of the for loop of
imx290_set_register_array().
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Manivannan Sadhasivam [Fri, 12 Jun 2020 13:53:53 +0000 (15:53 +0200)]
media: i2c: imx290: Add support to enumerate all frame sizes
Add support to enumerate all frame sizes supported by IMX290. This is
required for using with userspace tools such as libcamera.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Manivannan Sadhasivam [Fri, 12 Jun 2020 13:53:52 +0000 (15:53 +0200)]
media: i2c: imx290: Add RAW12 mode support
IMX290 is capable of outputting frames in both Raw Bayer (packed) 10 and
12 bit formats. Since the driver already supports RAW10 mode, let's add
the missing RAW12 mode as well.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Manivannan Sadhasivam [Fri, 12 Jun 2020 13:53:51 +0000 (15:53 +0200)]
media: i2c: imx290: Add support for test pattern generation
Add support for generating following test patterns by IMX290:
* Sequence Pattern 1
* Horizontal Color-bar Chart
* Vertical Color-bar Chart
* Sequence Pattern 2
* Gradation Pattern 1
* Gradation Pattern 2
* 000/555h Toggle Pattern
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Manivannan Sadhasivam [Fri, 12 Jun 2020 13:53:50 +0000 (15:53 +0200)]
media: i2c: imx290: Add configurable link frequency and pixel rate
IMX290 operates with multiple link frequency and pixel rate combinations.
The initial driver used a single setting for both but since we now have
the lane count support in place, let's add configurable link frequency
and pixel rate.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Manivannan Sadhasivam [Fri, 12 Jun 2020 13:53:49 +0000 (15:53 +0200)]
media: i2c: imx290: Add support for 2 data lanes
The IMX290 sensor can output frames with 2/4 CSI2 data lanes. This commit
adds support for 2 lane mode in addition to the 4 lane and also
configuring the data lane settings in the driver based on system
configuration.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Andrey Konovalov [Fri, 12 Jun 2020 13:53:48 +0000 (15:53 +0200)]
media: i2c: imx290: fix reset GPIO pin handling
According to https://www.kernel.org/doc/Documentation/gpio/consumer.txt,
- all of the gpiod_set_value_xxx() functions operate with the *logical*
value. So in imx290_power_on() the reset signal should be cleared
(de-asserted) with gpiod_set_value_cansleep(imx290->rst_gpio, 0), and in
imx290_power_off() the value of 1 must be used to apply/assert the reset
to the sensor. In the device tree the reset pin is described as
GPIO_ACTIVE_LOW, and gpiod_set_value_xxx() functions take this into
account,
- when devm_gpiod_get_optional() is called with GPIOD_ASIS, the GPIO is
not initialized, and the direction must be set later; using a GPIO
without setting its direction first is illegal and will result in undefined
behavior. Fix this by using GPIOD_OUT_HIGH instead of GPIOD_ASIS (this
asserts the reset signal to the sensor initially).
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Andrey Konovalov [Fri, 12 Jun 2020 13:53:47 +0000 (15:53 +0200)]
media: i2c: imx290: fix the order of the args in SET_RUNTIME_PM_OPS()
The macro is defined as SET_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn),
so imx290_power_off must be the 1st arg, and imx290_power_on the 2nd.
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Andrey Konovalov [Fri, 12 Jun 2020 13:53:46 +0000 (15:53 +0200)]
media: i2c: imx290: set the format before VIDIOC_SUBDEV_G_FMT is called
With the current driver 'media-ctl -p' issued right after the imx290 driver
is loaded prints:
pad0: Source
[fmt:unknown/0x0]
The format value of zero is due to the current_format field of the imx290
struct not being initialized yet.
As imx290_entity_init_cfg() calls imx290_set_fmt(), the current_mode field
is also initialized, so the line which set current_mode to a default value
in driver's probe() function is no longer needed.
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Chuhong Yuan [Wed, 3 Jun 2020 16:41:22 +0000 (18:41 +0200)]
media: omap3isp: Add missed v4l2_ctrl_handler_free() for preview_init_entities()
preview_init_entities() does not call v4l2_ctrl_handler_free() when
it fails.
Add the missed function to fix it.
Fixes:
de1135d44f4f ("[media] omap3isp: CCDC, preview engine and resizer")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Chuhong Yuan [Wed, 3 Jun 2020 16:40:48 +0000 (18:40 +0200)]
media: marvell-ccic: Add missed v4l2_async_notifier_cleanup()
mccic_register() forgets to cleanup the notifier in its error handler.
mccic_shutdown() also misses calling v4l2_async_notifier_cleanup().
Add the missed calls to fix them.
Fixes:
3eefe36cc00c ("media: marvell-ccic: use async notifier to get the sensor")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Bingbu Cao [Thu, 4 Jun 2020 01:25:19 +0000 (03:25 +0200)]
media: ov2740: make ov2740 driver only work with ACPI
As the ACPI id of ov2740 camera sensor was registered as "INT3474",
current ov2740 driver is supposed to be working with ACPI only.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sakari Ailus [Wed, 16 Oct 2019 11:19:30 +0000 (13:19 +0200)]
media: smiapp: Use pm_runtime_get_if_active
Use the convenience function pm_runtime_get_if_active() instead of a
number of calls to runtime PM to figure out if the device was already
powered up.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dinghao Liu [Mon, 25 May 2020 08:19:58 +0000 (10:19 +0200)]
media: smiapp: Fix runtime PM imbalance on error
When v4l2_async_register_subdev_sensor_common() returns
an error code, a pairing runtime PM usage counter
decrement is needed to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Sat, 20 Jun 2020 10:16:41 +0000 (12:16 +0200)]
media: media/cec.h: document cec_adapter fields
Document this core CEC structure.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Sat, 20 Jun 2020 10:16:40 +0000 (12:16 +0200)]
media: cec: remove unused waitq and phys_addrs fields
The cec_adapter struct contained a waitq field that isn't used
anywhere, so drop this.
It also contained a phys_addrs array to store any reported physical
addresses. However, this was never actually used, so this field is
removed as well. The original idea was to let the core keep track of
this information, but nothing was ever done with this. Should this
be needed in the future then it is easy enough to resurrect this.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Sat, 20 Jun 2020 09:33:01 +0000 (11:33 +0200)]
media: cec-ioc-adap-g-caps.rst: document available_log_addrs
The CEC_ADAP_G_CAPS documentation of the cec_caps struct was missing
the available_log_addrs field. Add this.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Chuhong Yuan [Fri, 5 Jun 2020 16:17:28 +0000 (18:17 +0200)]
media: budget-core: Improve exception handling in budget_register()
budget_register() has no error handling after its failure.
Add the missed undo functions for error handling to fix it.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Jia-Ju Bai [Sat, 30 May 2020 14:42:08 +0000 (16:42 +0200)]
media: pci: ttpci: av7110: fix possible buffer overflow caused by bad DMA value in debiirq()
The value av7110->debi_virt is stored in DMA memory, and it is assigned
to data, and thus data[0] can be modified at any time by malicious
hardware. In this case, "if (data[0] < 2)" can be passed, but then
data[0] can be changed into a large number, which may cause buffer
overflow when the code "av7110->ci_slot[data[0]]" is used.
To fix this possible bug, data[0] is assigned to a local variable, which
replaces the use of data[0].
Signed-off-by: Jia-Ju Bai <baijiaju@tsinghua.edu.cn>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Jan Pieter van Woerkom [Wed, 3 Jun 2020 03:58:40 +0000 (05:58 +0200)]
media: dvbsky: MyGica T230* receivers also do DVB-C and DVB-T
MyGica T230* receivers also do DVB-C and DVB-T: change their names.
Signed-off-by: Jan Pieter van Woerkom <jp@jpvw.nl>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Arnd Bergmann [Thu, 7 May 2020 21:33:14 +0000 (23:33 +0200)]
media: cxusb-analog: fix V4L2 dependency
CONFIG_DVB_USB_CXUSB_ANALOG is a 'bool' symbol with a dependency on the
tristate CONFIG_VIDEO_V4L2, which means it can be enabled as =y even
when its dependency is =m. This leads to a link failure:
drivers/media/usb/dvb-usb/cxusb-analog.o: In function `cxusb_medion_analog_init':
cxusb-analog.c:(.text+0x92): undefined reference to `v4l2_subdev_call_wrappers'
drivers/media/usb/dvb-usb/cxusb-analog.o: In function `cxusb_medion_register_analog':
cxusb-analog.c:(.text+0x466): undefined reference to `v4l2_device_register'
cxusb-analog.c:(.text+0x4c3): undefined reference to `v4l2_i2c_new_subdev'
cxusb-analog.c:(.text+0x4fb): undefined reference to `v4l2_subdev_call_wrappers'
...
Change the dependency only disallow the analog portion of the driver
in that configuration.
Fixes:
e478d4054054 ("media: cxusb: add analog mode support for Medion MD95700")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sean Young [Wed, 27 May 2020 09:27:48 +0000 (11:27 +0200)]
media: MAINTAINERS: rc-core and lirc maintainership
This has been maintained for some time, update MAINTAINERS to reflect.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sean Young [Wed, 27 May 2020 09:22:16 +0000 (11:22 +0200)]
media: USB: cdc-acm: blacklist IR Droid / IR Toy device
The IR Droid / IR Toy device used custom protocol over serial
line, so it is presenting itself as CDC ACM device.
Now that we have proper in-kernel driver for it we need to black-list the
device in cdc-acm driver.
http://dangerousprototypes.com/docs/USB_Infrared_Toy
https://www.irdroid.com/irdroid-usb-ir-transceiver/
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sean Young [Sun, 3 May 2020 09:27:55 +0000 (11:27 +0200)]
media: rc: add support for Infrared Toy and IR Droid devices
http://dangerousprototypes.com/docs/USB_Infrared_Toy
https://www.irdroid.com/irdroid-usb-ir-transceiver/
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Tue, 23 Jun 2020 12:03:58 +0000 (14:03 +0200)]
media: dev-encoder.rst: add GFDL-1-1+ to SPDX header
The media documents under the uAPI should be GFDL compatible.
So, make this one dual-licensed GPL-2.0 or GFDL-1.1+ with
no-invariant sections.
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Tue, 26 May 2020 09:00:51 +0000 (11:00 +0200)]
media: dev-encoder.rst: add reference to V4L2_FMT_FLAG_ENC_CAP_FRAME_INTERVAL
Setting the stateful encoder capture frame interval is only supported
if this flag is set. Document this.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Tue, 26 May 2020 08:59:53 +0000 (10:59 +0200)]
media: videodev2.h: add V4L2_FMT_FLAG_ENC_CAP_FRAME_INTERVAL flag
Add the V4L2_FMT_FLAG_ENC_CAP_FRAME_INTERVAL flag to signal that
the coded frame interval can be set separately from the raw frame
interval for stateful encoders.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Tue, 26 May 2020 08:40:01 +0000 (10:40 +0200)]
media: dev-decoder.rst: small fixes
Add missing periods at the end of two sentences.
Although mandatory -> Although not mandatory
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Wed, 20 May 2020 09:42:23 +0000 (11:42 +0200)]
media: vidioc-g-parm.rst: update the VIDIOC_G/S_PARM documentation
This documentation is very outdated. In particular, it is
not obvious at all that this is used to change the framerate of
sensors.
Fix it, and include references to the stateful encoder API where
this works slightly different.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tomasz Figa [Tue, 19 Nov 2019 11:34:57 +0000 (12:34 +0100)]
media: docs-rst: Document memory-to-memory video encoder interface
Due to complexity of the video encoding process, the V4L2 drivers of
stateful encoder hardware require specific sequences of V4L2 API calls
to be followed. These include capability enumeration, initialization,
encoding, encode parameters change, drain and reset.
Specifics of the above have been discussed during Media Workshops at
LinuxCon Europe 2012 in Barcelona and then later Embedded Linux
Conference Europe 2014 in Düsseldorf. The de facto Codec API that
originated at those events was later implemented by the drivers we already
have merged in mainline, such as s5p-mfc or coda.
The only thing missing was the real specification included as a part of
Linux Media documentation. Fix it now and document the encoder part of
the Codec API.
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sergey Senozhatsky [Thu, 14 May 2020 16:01:53 +0000 (18:01 +0200)]
media: vivid: add cache_hints module param
Add a cache_hints module param to control per-queue user space cache
hints support.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sergey Senozhatsky [Thu, 14 May 2020 16:01:52 +0000 (18:01 +0200)]
media: videobuf2: remove redundant if-statement
That if-statement seems to be unneeded.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sergey Senozhatsky [Thu, 14 May 2020 16:01:51 +0000 (18:01 +0200)]
media: videobuf2: don't test db_attach in dma-contig prepare and finish
We moved cache management decision making to the upper layer and
rely on buffer's need_cache_sync flags and videobuf2 core. If the
upper layer (core) has decided to invoke ->prepare() or ->finish()
then we must sync.
For DMABUF ->need_cache_sync_on_prepare and ->need_cache_sync_on_flush
are always false so videobuf core does not call ->prepare() and
->finish() on such buffers.
Additionally, scratch the DMABUF comment.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sergey Senozhatsky [Thu, 14 May 2020 16:01:50 +0000 (18:01 +0200)]
media: videobuf2: add begin/end cpu_access callbacks to dma-sg
Provide begin_cpu_access() and end_cpu_access() dma_buf_ops
callbacks for cache synchronisation on exported buffers.
V4L2_FLAG_MEMORY_NON_CONSISTENT has no effect on dma-sg buffers.
dma-sg allocates memory using the page allocator directly, so
there is no memory consistency guarantee.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sergey Senozhatsky [Thu, 14 May 2020 16:01:49 +0000 (18:01 +0200)]
media: videobuf2: add begin/end cpu_access callbacks to dma-contig
Provide begin_cpu_access() and end_cpu_access() callbacks for
cache synchronisation on exported buffers.
The patch also adds a new helper function - vb2_dc_buffer_consistent(),
which returns true is if the buffer is consistent (DMA_ATTR_NON_CONSISTENT
bit cleared), so then we don't need to sync anything.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sergey Senozhatsky [Thu, 14 May 2020 16:01:48 +0000 (18:01 +0200)]
media: videobuf2: check ->synced flag in prepare() and finish()
This simplifies the code a tiny bit and let's us to avoid
unneeded ->prepare()/->finish() calls.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sergey Senozhatsky [Thu, 14 May 2020 16:01:47 +0000 (18:01 +0200)]
media: videobuf2: do not sync caches when we are allowed not to
Skip ->prepare() or/and ->finish() cache synchronisation if
user-space requested us to do so (or when queue dma direction
permits us to skip cache syncs).
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sergey Senozhatsky [Thu, 14 May 2020 16:01:46 +0000 (18:01 +0200)]
media: videobuf2: factor out planes prepare/finish functions
Factor out the code, no functional changes.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sergey Senozhatsky [Thu, 14 May 2020 16:01:45 +0000 (18:01 +0200)]
media: videobuf2: handle V4L2_FLAG_MEMORY_NON_CONSISTENT flag
This patch lets user-space to request a non-consistent memory
allocation during CREATE_BUFS and REQBUFS ioctl calls.
= CREATE_BUFS
struct v4l2_create_buffers has seven 4-byte reserved areas,
so reserved[0] is renamed to ->flags. The struct, thus, now
has six reserved 4-byte regions.
= CREATE_BUFS32
struct v4l2_create_buffers32 has seven 4-byte reserved areas,
so reserved[0] is renamed to ->flags. The struct, thus, now
has six reserved 4-byte regions.
= REQBUFS
We use one bit of a ->reserved[1] member of struct v4l2_requestbuffers,
which is now renamed to ->flags. Unlike v4l2_create_buffers, struct
v4l2_requestbuffers does not have enough reserved room. Therefore for
backward compatibility ->reserved and ->flags were put into anonymous
union.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>