drm/amd/display: PSR eDP p-state warning occurs intermittently after unplug DP

[Why]
with eDP + DP, each display use one pipe. after DP unplugged, eDP switch
from one pipe to two pipes -- pipe split.  dpp1_cm_set_regamma_pwl will
be executed too. The duration from switch single pipe to dual pipes is a
little long which could let eDP enter PSR mode. upon two pipes for eDP
are setup, eDP PHY is disabled. front pipe is not really running to
fetch data from frame buffer. i.e., dchubp is not in normal working
status. execution of hubbub1_wm_change_req_wa may cause p-state warning.

[How]
disable eDP PSR before dc_commit_state. psr is disabled when execute
hubbub1_wm_change_req_wa.

Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix DFPstate hang due to view port changed

[Why]
Place the cursor in the center of screen between two pipes then
adjusting the viewport but cursour doesn't update cause DFPstate hang.

[How]
If viewport changed, update cursor as well.

Cc: stable@vger.kernel.org
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Change ABM config init interface

[Why & How]
change abm config init interface to support multiple ABMs.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: create a function to decide mst link settings

[why]
create a dedicated function to make mst link settings decision, so that
the policy's decision is made in a unified place.

Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Assign correct left shift

[Why]
Reading for DP alt registers return incorrect values due to LE_SF
definition missing.

[How]
Define correct LE_SF or DP alt registers.

Signed-off-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Call DMUB for eDP power control

[Why]
If DMUB is used, LVTMA VBIOS call can be used to control eDP instead of
tranditional transmitter control.  Interface is agreed with VBIOS for
eDP to use this new path to program LVTMA registers.

[How]
Create DAL interface to send DMUB command for LVTMA as currently
implemented in VBIOS.

Signed-off-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.98

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: [FW Promotion] Release 0.0.28

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add condition check for trace_amdgpu_cs()

v1:
add trace event enabled check to avoid nop loop when submit multi ibs
in amdgpu_cs_ioctl() function.

v2:
add a new wrapper function to trace all amdgpu cs ibs.

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix amdgpu_bo_release_notify() comment error

fix amdgpu_bo_release_notify() comment error.

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: fix the wrong sdma instance query for renoir

Renoir only has one sdma instance, it will get failed once query the
sdma1 registers. So use switch-case instead of static register array.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: drop log message in amdgpu_dpm_baco_reset()

The caller does this now for all reset types.  This is now
a duplicate call.

Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: note what type of reset we are using

When we reset the GPU, note what type of reset will be
used.  This makes debugging different reset scenarios
more clear as the driver may use different reset
methods depending on conditions on the system.

Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: print where we get the vbios image from

ACPI, ROM, PCI BAR, etc.

Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: parse ta firmware for navy_flounder

Use the same case as sienna_cichlid

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn3.0: only SIENNA_CICHLID need specify instance for dec/enc

Only SIENNA_CICHLID(VCN3) has 2 unsymmetrical instances, there're less
codecs on instance 1, we use 0 for decode and 1 for encode.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: optimize the power related source code layout

The target is to provide a clear entry point(for power routines).
Also this can help to maintain a clear view about the frameworks
used on different ASICs. Hopefully all these can make power part
more friendly to play with.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: put those exposed power interfaces in amdgpu_dpm.c

As other power interfaces.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: optimize i2c bus access implementation

The caller needs not care about the internal details how the powerplay
API implemented.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: drop unnecessary pp_funcs checker

It's redundant. Also, the callers should not care about
the implementation details.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: optimize amdgpu_dpm_set_clockgating_by_smu() implementation

Cover the implementation details from outside(of power part).

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: drop redundant MEM_TYPE_* macros

As these are already defined in amdgpu_atombios.h. Otherwise, we may
hit "redefined" compile warning.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: suppress the kernel test robot warning

Suppress the warning below:
   In file included from drivers/gpu/drm/amd/amdgpu/../powerplay/smu_cmn.c:
>> drivers/gpu/drm/amd/powerplay/smu_cmn.c:485:9: warning: Identical condition 'ret', second condition is always false [identicalConditionAfterEarlyExit]
    return ret;
           ^
   drivers/gpu/drm/amd/powerplay/smu_cmn.c:477:6: note: first condition
    if (ret)
        ^
   drivers/gpu/drm/amd/powerplay/smu_cmn.c:485:9: note: second condition
    return ret;
           ^

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: guard ras debugfs creation/removal based on CONFIG_DEBUG_FS

It can avoid potential build warn/error when
CONFIG_DEBUG_FS is not set.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix NULL pointer access issue when unloading driver

When unloading driver by "modprobe -r amdgpu", one NULL pointer
dereference bug occurs in ras debugfs releasing. The cause is the
duplicated debugfs_remove, as drm debugfs_root dir has been cleaned
up already by drm_minor_unregister.

BUG: kernel NULL pointer dereference, address: 00000000000000a0
PGD 0 P4D 0
Oops: 0002 [#1] SMP PTI
CPU: 11 PID: 1526 Comm: modprobe Tainted: G           OE     5.6.0-guchchen #1
Hardware name: System manufacturer System Product Name/TUF Z370-PLUS GAMING II, BIOS 0411 09/21/2018
RIP: 0010:down_write+0x15/0x40
Code: eb de e8 7e 17 72 ff cc cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 53 48 89 fb e8 92
d8 ff ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 13 75 0f 65 48 8b 04 25 c0 8b 01 00 48 89 43 08 5b c3
RSP: 0018:ffffb1590386fcd0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 00000000000000a0 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffffffff85b2fcc2 RDI: 00000000000000a0
RBP: ffffb1590386fd30 R08: ffffffff85b2fcc2 R09: 000000000002b3c0
R10: ffff97a330618c40 R11: 00000000000005f6 R12: ffff97a3481beb40
R13: 00000000000000a0 R14: ffff97a3481beb40 R15: 0000000000000000
FS:  00007fb11a717540(0000) GS:ffff97a376cc0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000a0 CR3: 00000004066d6006 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 simple_recursive_removal+0x63/0x370
 ? debugfs_remove+0x60/0x60
 debugfs_remove+0x40/0x60
 amdgpu_ras_fini+0x82/0x230 [amdgpu]
 ? __kernfs_remove.part.17+0x101/0x1f0
 ? kernfs_name_hash+0x12/0x80
 amdgpu_device_fini+0x1c0/0x580 [amdgpu]
 amdgpu_driver_unload_kms+0x3e/0x70 [amdgpu]
 amdgpu_pci_remove+0x36/0x60 [amdgpu]
 pci_device_remove+0x3b/0xb0
 device_release_driver_internal+0xe5/0x1c0
 driver_detach+0x46/0x90
 bus_remove_driver+0x58/0xd0
 pci_unregister_driver+0x29/0x90
 amdgpu_exit+0x11/0x25 [amdgpu]
 __x64_sys_delete_module+0x13d/0x210
 do_syscall_64+0x5f/0x250
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: revert "fix system hang issue during GPU reset"

The whole approach wasn't thought through till the end.

We already had a reset lock like this in the past and it caused the same problems like this one.

Completely revert the patch for now and add individual trylock protection to the hardware access functions as necessary.

This reverts commit df9c8d1aa278c435c30a69b8f2418b4a52fcb929.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: enable Sienna Cichlid mgpu fan boost feature

Support Sienna Cichlid mgpu fan boost enablement.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: enable Navi1X mgpu fan boost feature(V2)

Support Navi1X mgpu fan boost enablement.

V2: rich the comment and correct the revision id check

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: enable swSMU mgpu fan boost support

Enable mgpu fan boost feature on swSMU routines.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: optimize the interface for mgpu fan boost enablement

Cover the implementation details from outside(of power). Also preparing
for expanding this to swSMU.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix uninit-value in arcturus_log_thermal_throttling_event()

when function arcturus_get_smu_metrics_data() call failed,
it will cause the variable "throttler_status" isn't initialized before use.

warning:
powerplay/arcturus_ppt.c:2268:24: warning: ‘throttler_status’ may be used uninitialized in this function [-Wmaybe-uninitialized]
 2268 |   if (throttler_status & logging_label[throttler_idx].feature_mask) {

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: disable gfxoff for navy_flounder

gfxoff is temporarily disabled for navy_flounder,
since at present the feature has broken some basic
amdgpu test.

Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: bump NAVI12 driver if version

To fit the latest SMU firmware.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: maximum the code sharing around metrics table retrieving

Instead of having one copy in each ASIC.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: update the metrics table cache interval as 1ms

To make the setting same as Arcturus/Navi1x/Sienna_Cichlid.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Use function pointer for some mmhub functions

Add more function pointers to amdgpu_mmhub_funcs. ASIC specific
implementation of most mmhub functions are called from a general
function pointer, instead of calling different function for
different ASIC. Simplify the code by deleting duplicate functions

Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: pass NULL pointer instead of 0

Fixes: c030f2e4166c3f55 ("drm/amdgpu: add amdgpu_ras.c to support ras (v2)")
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: annotate a false positive recursive locking

[  584.110304] ============================================
[  584.110590] WARNING: possible recursive locking detected
[  584.110876] 5.6.0-deli-v5.6-2848-g3f3109b0e75f #1 Tainted: G           OE
[  584.111164] --------------------------------------------
[  584.111456] kworker/38:1/553 is trying to acquire lock:
[  584.111721] ffff9b15ff0a47a0 (&adev->reset_sem){++++}, at: amdgpu_device_gpu_recover+0x262/0x1030 [amdgpu]
[  584.112112]
               but task is already holding lock:
[  584.112673] ffff9b1603d247a0 (&adev->reset_sem){++++}, at: amdgpu_device_gpu_recover+0x262/0x1030 [amdgpu]
[  584.113068]
               other info that might help us debug this:
[  584.113689]  Possible unsafe locking scenario:

[  584.114350]        CPU0
[  584.114685]        ----
[  584.115014]   lock(&adev->reset_sem);
[  584.115349]   lock(&adev->reset_sem);
[  584.115678]
                *** DEADLOCK ***

[  584.116624]  May be due to missing lock nesting notation

[  584.117284] 4 locks held by kworker/38:1/553:
[  584.117616]  #0: ffff9ad635c1d348 ((wq_completion)events){+.+.}, at: process_one_work+0x21f/0x630
[  584.117967]  #1: ffffac708e1c3e58 ((work_completion)(&con->recovery_work)){+.+.}, at: process_one_work+0x21f/0x630
[  584.118358]  #2: ffffffffc1c2a5d0 (&tmp->hive_lock){+.+.}, at: amdgpu_device_gpu_recover+0xae/0x1030 [amdgpu]
[  584.118786]  #3: ffff9b1603d247a0 (&adev->reset_sem){++++}, at: amdgpu_device_gpu_recover+0x262/0x1030 [amdgpu]
[  584.119222]
               stack backtrace:
[  584.119990] CPU: 38 PID: 553 Comm: kworker/38:1 Kdump: loaded Tainted: G           OE     5.6.0-deli-v5.6-2848-g3f3109b0e75f #1
[  584.120782] Hardware name: Supermicro SYS-7049GP-TRT/X11DPG-QT, BIOS 3.1 05/23/2019
[  584.121223] Workqueue: events amdgpu_ras_do_recovery [amdgpu]
[  584.121638] Call Trace:
[  584.122050]  dump_stack+0x98/0xd5
[  584.122499]  __lock_acquire+0x1139/0x16e0
[  584.122931]  ? trace_hardirqs_on+0x3b/0xf0
[  584.123358]  ? cancel_delayed_work+0xa6/0xc0
[  584.123771]  lock_acquire+0xb8/0x1c0
[  584.124197]  ? amdgpu_device_gpu_recover+0x262/0x1030 [amdgpu]
[  584.124599]  down_write+0x49/0x120
[  584.125032]  ? amdgpu_device_gpu_recover+0x262/0x1030 [amdgpu]
[  584.125472]  amdgpu_device_gpu_recover+0x262/0x1030 [amdgpu]
[  584.125910]  ? amdgpu_ras_error_query+0x1b8/0x2a0 [amdgpu]
[  584.126367]  amdgpu_ras_do_recovery+0x159/0x190 [amdgpu]
[  584.126789]  process_one_work+0x29e/0x630
[  584.127208]  worker_thread+0x3c/0x3f0
[  584.127621]  ? __kthread_parkme+0x61/0x90
[  584.128014]  kthread+0x12f/0x150
[  584.128402]  ? process_one_work+0x630/0x630
[  584.128790]  ? kthread_park+0x90/0x90
[  584.129174]  ret_from_fork+0x3a/0x50

Each adev has owned lock_class_key to avoid false positive
recursive locking.

v2:
1. register adev->lock_key into lockdep, otherwise lockdep will
report the below warning

[ 1216.705820] BUG: key ffff890183b647d0 has not been registered!
[ 1216.705924] ------------[ cut here ]------------
[ 1216.705972] DEBUG_LOCKS_WARN_ON(1)
[ 1216.705997] WARNING: CPU: 20 PID: 541 at kernel/locking/lockdep.c:3743 lockdep_init_map+0x150/0x210

v3:
change to use down_write_nest_lock to annotate the false dead-lock
warning.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add debugfs interface for RAP test

After amdgpu driver loading successfully, we can use
RAP debugfs interface <debugfs_dir>/dri/xxx/rap_test
to trigger RAP test.

Currently only L0 validate test is supported.

v2: refine amdgpu_rap.h

Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: Guchun Chen <Guchun.Chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable RAP TA load

Enable the RAP TA loading path and add RAP test
trigger interface.

v2: fix potential mem leak issue

Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: Guchun Chen <Guchun.Chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add RAP TA header file

The RAP TA contains tests used to verify if
RAP(Register Access Policy), or otherwise known
as Security Policy is applied correctly
by PSP BL&TOS.

The RAP test is a measure to ensure that we reduce
the avenue of complexity and mistakes when dealing
with RAP in post-si execution, where debugging failures
related to RAP is quite difficult and expensive.

v2: add introduction for RAP TA

Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: Guchun Chen <Guchun.Chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: reconfigure spm golden settings on Navi1x after GFXOFF exit(v3)

On Navi1x, the SPM golden settings are lost after GFXOFF
enter/exit, so reconfigure the golden settings after GFXOFF
exit.

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add interface amdgpu_gfx_init_spm_golden for Navi1x

On Navi1x, the SPM golden settings are lost after GFXOFF
enter/exit, so reconfiguration is needed. Make the
configuration code as an interface for future use.

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add debugfs node to toggle ras error cnt harvest

Before ras recovery is issued, user could operate this debugfs
node to enable/disable the harvest of all RAS IPs' ras error
count registers, which will help keep hardware's registers'
status instead of cleaning up them.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: bypass querying ras error count registers

Once ras recovery is issued by ras sync flood interrupt or
ras controller interrupt, add this guard to bypass or execute
ras error count register harvest of all IPs.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Enable P2P dmabuf over XGMI

Access the exported P2P dmabuf over XGMI, if available.
Otherwise, fall back to the existing PCIe method.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arunpravin <apaneers@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: convert to use le16_add_cpu()

Convert cpu_to_le16(le16_to_cpu(E1) + E2) to use le16_add_cpu().

Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: drop unused function

This is not longer used as of the latest rework of this
code so drop it to avoid a unused function warning.

Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add DCN support for aarch64

This adds ARM64 support into the DCN. This mainly enables support
for Navi graphics cards. The dcn10 changes haven't been tested,
since I don't have the relevant hardware available, but there
is no way to conditionally disable them, so I've done them anyway.

Signed-off-by: Daniel Kolesa <daniel@octaforge.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: use GFP_ATOMIC in dcn20_validate_bandwidth_internal

GFP_KERNEL may and will sleep, and this is being executed in
a non-preemptible context; this will mess things up since it's
called inbetween DC_FP_START/END, and rescheduling will result
in the DC_FP_END later being called in a different context (or
just crashing if any floating point/vector registers/instructions
are used after the call is resumed in a different context).

Signed-off-by: Daniel Kolesa <daniel@octaforge.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Blank stream before destroying HDCP session

[Why]
Stream disable sequence incorretly destroys HDCP session while stream is
not blanked and while audio is not muted. This sequence causes a flash
of corruption during mode change and an audio click.

[How]
Change sequence to blank stream before destroying HDCP session. Audio will
also be muted by blanking the stream.

Cc: stable@vger.kernel.org
Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix EDID parsing after resume from suspend

[Why]
Resuming from suspend, CEA blocks from EDID are not parsed and no video
modes can support YUV420. When this happens, output bpc cannot go over
8-bit with 4K modes on HDMI.

[How]
In amdgpu_dm_update_connector_after_detect(), drm_add_edid_modes() is
called after drm_connector_update_edid_property() to fully parse EDID
and update display info.

Cc: stable@vger.kernel.org
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Disconnect pipe separetely when disable pipe split

[Why]
When changing pixel formats for HDR (e.g. ARGB -> FP16)
there are configurations that change from 2 pipes to 1 pipe.
In these cases, it seems that disconnecting MPCC and doing
a surface update at the same time(after unlocking) causes
some registers to be updated slightly faster than others
after unlocking (e.g. if the pixel format is updated to FP16
before the new surface address is programmed, we get
corruption on the screen because the pixel formats aren't
matching). We separate disconnecting MPCC from the rest
of  the  pipe programming sequence to prevent this.

[How]
Move MPCC disconnect into separate operation than the
rest of the pipe programming.

Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Switch to immediate mode for updating infopackets

[Why]
Using FRAME_UPDATE will result in infopacket to be potentially updated
one frame late.
In commit stream scenarios for previously active stream, some stale
infopacket data from previous config might be erroneously sent out on
initial frame after stream is re-enabled.

[How]
Switch to using IMMEDIATE_UPDATE mode

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Ashley Thomas <Ashley.Thomas2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix LFC multiplier changing erratically

[Why]
1. There is a calculation that is using frame_time_in_us instead of
last_render_time_in_us to calculate whether choosing an LFC multiplier
would cause the inserted frame duration to be outside of range.

2. We do not handle unsigned integer subtraction correctly and it underflows
to a really large value, which causes some logic errors.

[How]
1. Fix logic to calculate 'within range' using last_render_time_in_us
2. Split out delta_from_mid_point_delta_in_us calculation to ensure
we don't underflow and wrap around

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: mpcc black color should not be impacted by pixel encoding format

[Why]
The format in MPCC should be 444

[How]
do not modify the mpcc black color according to pixel encoding format

Signed-off-by: Xiaodong Yan <Xiaodong.Yan@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Revert regression

[Why]
Caused pipe split regression

Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix incorrect backlight register offset for DCN

[Why]
Typo in backlight refactor inctroduced wrong register offset.

[How]
Change DCE to DCN register map for PWRSEQ_REF_DIV

Cc: stable@vger.kernel.org
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Ashley Thomas <Ashley.Thomas2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Adjust static-ness of resource functions

[Why]
Register definitions are asic-specific, so functions that use registers of
a particular asic should be static, to be exposed in asic-specific function
pointer structures.

[How]
 - make register-definition-using functions static
 - make some functions non-static, for future use
 - remove duplicate function definition

Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix reload KMD hang on GFX10 KIQ

GFX10 KIQ will hang if we try below steps:
modprobe amdgpu
rmmod amdgpu
modprobe amdgpu sched_hw_submission=4

Due to KIQ is always living there even after KMD unloaded
thus when doing the realod KIQ will crash upon its register
being programed by different values with the previous loading
(the config like HQD addr, ring size, is easily changed if we alter
the sched_hw_submission)

the fix is we must inactive KIQ first before touching any
of its registgers

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update gc golden register for arcturus

Update golden setting to improve performance on HPC
and ML apps

Signed-off-by: shiwu.zhang <shiwu.zhang@amd.com>
Tested-by: gang.long <gang.long@amd.com>
Reviewed-by: guchun.chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: correct UVD/VCE PG state on custom pptable uploading

The UVD/VCE PG state is managed by UVD and VCE IP. It's error-prone to
assume the bootup state in SMU based on the dpm status.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: correct Vega20 cached smu feature state

Correct the cached smu feature state on pp_features sysfs
setting.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Skip some registers config for SRIOV

Some registers are not accessible to virtual function setup, so
skip their initialization when in VF-SRIOV mode.

v2: move SRIOV VF check into specify functions;
modify commit description and comment.

Signed-off-by: Liu ChengZhe <ChengZhe.Liu@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Fix spurious debug exception on gfx10

s_barrier triggers a debug exception when issued with PRIV=1,
DEBUG_EN=1. This causes spurious notifications to rocm-gdb.

Clear MODE before issuing s_barrier and restore MODE afterwards
in the context restore handler.

Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Tested-by: Laurent Morichetti <laurent.morichetti@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdkfd: Unify gfx9/gfx10 context save area layouts"

This reverts commit 0a5baee415000a3e18730ac98e19d046c3cebbe6.

The change introduced a regression on some chips. Reverting until
a proper solution can be found.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdkfd: Fix spurious debug exception on gfx10"

This reverts commit ea368183ae900e376b66d3f23da22acde48e385a.

Needed due to conflicts when reverting "drm/amdkfd: Unify gfx9/gfx10
context save area layouts".

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm: amdgpu: Use the correct size when allocating memory

When '*sgt' is allocated, we must allocated 'sizeof(**sgt)' bytes instead
of 'sizeof(*sg)'.

The sizeof(*sg) is bigger than sizeof(**sgt) so this wastes memory but
it won't lead to corruption.

Fixes: f44ffd677fb3 ("drm/amdgpu: add support for exporting VRAM using DMA-buf v3")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix bug where DPM is not enabled after hibernate and resume

Reproducing bug report here:
After hibernating and resuming, DPM is not enabled. This remains the case
even if you test hibernate using the steps here:
https://www.kernel.org/doc/html/latest/power/basic-pm-debugging.html

I debugged the problem, and figured out that in the file hardwaremanager.c,
in the function, phm_enable_dynamic_state_management(), the check
'if (!hwmgr->pp_one_vf && smum_is_dpm_running(hwmgr) && !amdgpu_passthrough(adev) && adev->in_suspend)'
returns true for the hibernate case, and false for the suspend case.

This means that for the hibernate case, the AMDGPU driver doesn't enable DPM
(even though it should) and simply returns from that function.
In the suspend case, it goes ahead and enables DPM, even though it doesn't need to.

I debugged further, and found out that in the case of suspend, for the
CIK/Hawaii GPUs, smum_is_dpm_running(hwmgr) returns false, while in the case of
hibernate, smum_is_dpm_running(hwmgr) returns true.

For CIK, the ci_is_dpm_running() function calls the ci_is_smc_ram_running() function,
which is ultimately used to determine if DPM is currently enabled or not,
and this seems to provide the wrong answer.

I've changed the ci_is_dpm_running() function to instead use the same method that
some other AMD GPU chips do (e.g Fiji), which seems to read the voltage controller.
I've tested on my R9 390 and it seems to work correctly for both suspend and
hibernate use cases, and has been stable so far.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=208839
Signed-off-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: unlock mutex on error

Make sure to unlock the mutex when error happen

v2:
1. correct syntax error in the commit comments
2. remove change-Id

Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: put VCN/JPEG into PG ungate state before dpm table setup(V3)

As VCN related dpm table setup needs VCN be in PG ungate state. Same logics
applies to JPEG.

V2: fix paste typo
V3: code cosmetic

Signed-off-by: Evan Quan <evan.quan@amd.com>
Tested-by: Matt Coffin <mcoffin13@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: update swSMU VCN/JPEG PG logics

Add lock protections and avoid unnecessary actions
if the PG state is already the same as required.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Tested-by: Matt Coffin <mcoffin13@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use mode1 reset by default for sienna_cichlid

Swith default gpu reset method for sienna_cichlid to MODE1 reset.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Drop dm_determine_update_type_for_commit

[Why]
This was added in the past to solve the issue of not knowing when
to stall for medium and full updates in DM.

Since DC is ultimately decides what requires bandwidth changes we
wanted to make use of it directly to determine this.

The problem is that we can't actually pass any of the stream or surface
updates into DC global validation, so we don't actually check if the new
configuration is valid - we just validate the old existing config
instead and stall for outstanding commits to finish.

There's also the problem of grabbing the DRM private object for
pageflips which can lead to page faults in the case where commits
execute out of order and free a DRM private object state that was
still required for commit tail.

[How]
Now that we reset the plane in DM with the same conditions DC checks
we can have planes go through DC validation and we know when we need
to check and stall based on whether the stream or planes changed.

We mark lock_and_validation_needed whenever we've done this, so just
go back to using that instead of dm_determine_update_type_for_commit.

Since we'll skip resetting the plane for a pageflip we will no longer
grab the DRM private object for pageflips as well, avoiding the
page fault issued caused by pageflipping under load with commits
executing out of order.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Reset plane for anything that's not a FAST update

[Why]
MEDIUM or FULL updates can require global validation or affect
bandwidth. By treating these all simply as surface updates we aren't
actually passing this through DC global validation.

[How]
There's currently no way to pass surface updates through DC global
validation, nor do I think it's a good idea to change the interface
to accept these.

DC global validation itself is currently stateless, and we can move
our update type checking to be stateless as well by duplicating DC
surface checks in DM based on DRM properties.

We wanted to rely on DC automatically determining this since DC knows
best, but DM is ultimately what fills in everything into DC plane
state so it does need to know as well.

There are basically only three paths that we exercise in DM today:

1) Cursor (async update)
2) Pageflip (fast update)
3) Full pipe programming (medium/full updates)

Which means that anything that's more than a pageflip really needs to
go down path #3.

So this change duplicates all the surface update checks based on DRM
state instead inside of should_reset_plane().

Next step is dropping dm_determine_update_type_for_commit and we no
longer require the old DC state at all for global validation.

Optimization can come later so we don't reset DC planes at all for
MEDIUM udpates and avoid validation, but we might require some extra
checks in DM to achieve this.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use validated tiling_flags and tmz_surface in commit_tail

[Why]
So we're not racing with userspace or deadlocking DM.

[How]
These flags are now stored on dm_plane_state itself and acquried and
validated during commit_check, so just use those instead.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Avoid using unvalidated tiling_flags and tmz_surface in prepare_planes

[Why]
We're racing with userspace as the flags could potentially change
from when we acquired and validated them in commit_check.

[How]
We unfortunately can't drop this function in its entirety from
prepare_planes since we don't know the afb->address at commit_check
time yet.

So instead of querying new tiling_flags and tmz_surface use the ones
from the plane_state directly.

While we're at it, also update the force_disable_dcc option based
on the state from atomic check.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Reset plane when tiling flags change

[Why]
Enabling or disable DCC or switching between tiled and linear formats
can require bandwidth updates.

They're currently skipping all DC validation by being treated as purely
surface updates.

[How]
Treat tiling_flag changes (which encode DCC state) as a condition for
resetting the plane.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Store tiling_flags and tmz_surface on dm_plane_state

[Why]
Store these in advance so we can reuse them later in commit_tail without
having to reserve the fbo again.

These will also be used for checking for tiling changes when deciding
to reset the plane or not.

[How]
This change should mostly be a refactor. Only commit check is affected
for now and I'll drop the get_fb_info calls in prepare_planes and
commit_tail after.

This runs a prepass loop once we think that all planes have been added
to the context and replaces the get_fb_info calls with accessing the
dm_plane_state instead.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: update driver if file for sienna_cichlid

Update drive if file for sienna_cichlid.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: new ids flag for tmz (v2)

Allows UMD to know if TMZ is supported and enabled.

This commit also bumps KMS_DRIVER_MINOR because if we don't
UMD can't tell if "ids_flags & AMDGPU_IDS_FLAGS_TMZ == 0" means
"tmz is not enabled" or "tmz may be enabled but the kernel doesn't
report it".

v2: use amdgpu_is_tmz() and reworded commit message.

Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add control method to bypass metrics cache on Vega12

As for the gpu metric export, metrics cache makes no sense. It's up to
user to decide how often the metrics should be retrieved.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add control method to bypass metrics cache on Vega20

As for the gpu metric export, metrics cache makes no sense. It's up to
user to decide how often the metrics should be retrieved.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add control method to bypass metrics cache on Renoir

As for the gpu metric export, metrics cache makes no sense. It's up to
user to decide how often the metrics should be retrieved.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add control method to bypass metrics cache on Sienna Cichlid

As for the gpu metric export, metrics cache makes no sense. It's up to
user to decide how often the metrics should be retrieved.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add control method to bypass metrics cache on Navi10

As for the gpu metric export, metrics cache makes no sense. It's up to
user to decide how often the metrics should be retrieved.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add control method to bypass metrics cache on Arcturus

As for the gpu metric export, metrics cache makes no sense. It's up to
user to decide how often the metrics should be retrieved.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add Vega12 support for gpu metrics export

Add Vega12 gpu metrics export interface.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add Vega20 support for gpu metrics export

Add Vega20 gpu metrics export interface.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: enable gpu_metrics export on legacy powerplay routines

Enable gpu_metrics support on legacy powerplay routines.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add Renoir support for gpu metrics export(V2)

Add Renoir gpu metrics export interface.

V2: use memcpy to make code more compact

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add Sienna Cichlid support for gpu metrics export

Add Sienna Cichlid gpu metrics export interface.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add Navi1x support for gpu metrics export

Add Navi1x gpu metrics export interface.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: update the data structure for NV12 SmuMetrics

Although it does not bring any problem for now, the coming gpu
metrics interface needs to handle them differently based on the
asic type.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add Arcturus support for gpu metrics export

Add Arcturus gpu metrics export interface.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: implement SMU V11 common APIs for retrieving link speed/width

This will be shared around all SMU V11 asics.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add new sysfs interface for retrieving gpu metrics(V2)

A new interface for UMD to retrieve gpu metrics data.

V2: rich the documentation

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: define an universal data structure for gpu metrics (V4)

Thus we can provide an interface for UMD to retrieve gpu metrics data.

V2: better naming and comments
V3: two structures created for dGPU and APU separately
V4: add driver attached timestamp

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix spelling mistake "paramter" -> "parameter"

There is a spelling mistake in a dev_warn message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: grant Arcturus softmin/max setting on latest PM firmware

For Arcturus, the softmin/max settings from driver are permitted on the
latest(54.26 later) SMU firmware. Thus enabling them in driver.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>