drm/i915/pxp: add device link between i915 and mei_pxp

Add device link with i915 as consumer and mei_pxp as supplier
to ensure proper ordering of power flows.

V2: condition on absence of heci_pxp to filter out DG

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125082637.118970-3-alan.previn.teres.alexis@intel.com

mei: mei-me: resume device in prepare

Asynchronous runtime resume is not possible while the system
is suspending.
The power management subsystem resumes the device only in the
suspend phase, not in the prepare phase.
Force resume device in prepare to allow drivers on mei bus
to communicate in their prepare callbacks.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Reviewed-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125082637.118970-2-alan.previn.teres.alexis@intel.com

drm/i915: Convert PALETTE() to _PICK_EVEN_2RANGES()

PALETTE() can use _PICK_EVEN_2RANGES instead of _PICK, which
reduces the size and is safer.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa<anusha.srivatsa@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120193457.3295977-9-lucas.demarchi@intel.com

drm/i915: Convert MBUS_ABOX_CTL() to _PICK_EVEN_2RANGES()

MBUS_ABOX_CTL() can use _PICK_EVEN_2RANGES instead of _PICK, which
reduces the size and is safer.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120193457.3295977-8-lucas.demarchi@intel.com

drm/i915: Convert _FIA() to _PICK_EVEN_2RANGES()

_FIA() can use _PICK_EVEN_2RANGES instead of _PICK, which reduces the
size and is safer.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120193457.3295977-7-lucas.demarchi@intel.com

drm/i915: Convert PIPE3/PORT3 to _PICK_EVEN_2RANGES()

Like done for when __var_args__ were used, but size-wise it's also
benefitial to avoid _PICK() used for 3 ports/pipes:

$ size build64/drivers/gpu/drm/i915/i915.o{.old,.new}
   text    data     bss     dec     hex filename
4026288  185703    6984 4218975  40605f build64/drivers/gpu/drm/i915/i915.o.old
4025496  185703    6984 4218183  405d47 build64/drivers/gpu/drm/i915/i915.o.new

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120193457.3295977-6-lucas.demarchi@intel.com

drm/i915: Replace _MMIO_PHY3() with _PICK_EVEN_2RANGES()

As done previously for pll, also convert users of _PHY3() to
_PICK_EVEN_2RANGES(). Size comparison of i915.o:

$ size build64/drivers/gpu/drm/i915/i915.o{.old,.new}
   text    data     bss     dec     hex filename
4026997  185703    6984 4219684  406324 build64/drivers/gpu/drm/i915/i915.o.old
4026288  185703    6984 4218975  40605f build64/drivers/gpu/drm/i915/i915.o.new

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120193457.3295977-5-lucas.demarchi@intel.com

drm/i915: Convert pll macros to _PICK_EVEN_2RANGES

Avoid the array lookup, converting the PLL macros after ICL to
_PICK_EVEN_RANGES. This provides the following reduction in code size:

$ size build64/drivers/gpu/drm/i915/i915.o{.old,.new}
   text    data     bss     dec     hex filename
4027456  185703    6984 4220143  4064ef build64/drivers/gpu/drm/i915/i915.o.old
4026997  185703    6984 4219684  406324 build64/drivers/gpu/drm/i915/i915.o.new

At the same time it's safer, avoiding out-of-bounds array access.  This
allows to remove _MMIO_PLL3() that is now unused.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120193457.3295977-4-lucas.demarchi@intel.com

drm/i915: Fix coding style on DPLL*_ENABLE defines

Abide by the rules in the top of the header: 2 spaces for bitfield,
prefix offsets with underscore and prefer the use of REG_BIT().

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120193457.3295977-3-lucas.demarchi@intel.com

drm/i915: Add _PICK_EVEN_2RANGES()

It's a constant pattern in the driver to need to use 2 ranges of MMIOs
based on port, phy, pll, etc. When that happens, instead of using
_PICK_EVEN(), _PICK() needs to be used.  Using _PICK() is discouraged
due to some reasons like:

1) It increases the code size since the array is declared
   in each call site
2) Developers need to be careful not to incur an
   out-of-bounds array access
3) Developers need to be careful that the indexes match the
   table. For that it may be that the table needs to contain
   holes, making (1) even worse.

Add a variant of _PICK_EVEN() that works with 2 ranges and selects which
one to use depending on the index value.

v2: Fix the address expansion in the example (Anusha)
v3: Also rename macro to _PICK_EVEN_2RANGES() in the documentation
    and reword it to clarify what ranges are chosen based on the index
    (Jani)

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125182403.7526-1-lucas.demarchi@intel.com

drm/i915/mtl: Apply Wa_14013475917 for all MTL steppings

Wa_14013475917 has to be applied for all MTL steppings.

Bspec: 66624

Cc: Mika Kahola <mika.kahola@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230124102636.2567292-3-jouni.hogander@intel.com

drm/i915/psr: Implement Wa_14014971492

Implement Wa_14014971492 and apply it for affected platforms.

Bspec: 52890, 54369, 55378, 66624

v2: Adjust platforms where applied

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230124102636.2567292-2-jouni.hogander@intel.com

drm/i915/panel: move panel fixed EDID to struct intel_panel

It's a bit confusing to have two cached EDIDs in struct intel_connector
with slightly different purposes. Make the distinction a bit clearer by
moving the EDID cached for eDP and LVDS panels at connector init time to
struct intel_panel, and name it fixed_edid. That's what it is, a fixed
EDID for the panels.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/328350ef918638928a8286cdbab3107c8258332d.1674643465.git.jani.nikula@intel.com

drm/i915/opregion: convert intel_opregion_get_edid() to struct drm_edid

Simplify validation and use by converting to drm_edid.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6abb01f1e97d54a3c11bec24377f035df412b492.1674643465.git.jani.nikula@intel.com

drm/i915/bios: convert intel_bios_init_panel() to drm_edid

Try to use struct drm_edid where possible, even if having to fall back
to looking into struct edid down low via drm_edid_raw().

v2: Rebase

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/897807d62f74f690a173ecd405e25c6ccdd63b98.1674643465.git.jani.nikula@intel.com

drm/i915/edid: convert DP, HDMI and LVDS to drm_edid

Convert all the connectors that use cached connector edid and
detect_edid to drm_edid.

Since drm_get_edid() calls drm_connector_update_edid_property() while
drm_edid_read*() do not, we need to call drm_edid_connector_update()
separately, in part due to the EDID caching behaviour in HDMI and
DP. Especially DP depends on the details parsed from EDID. (The big
behavioural change conflating EDID reading with parsing and property
update was done in commit 5186421cbfe2 ("drm: Introduce epoch counter to
drm_connector"))

v6: Rebase on drm_edid_connector_add_modes()

v5: Fix potential uninitialized var use (kernel test robot <lkp@intel.com>)

v4: Call drm_edid_connector_update() after reading HDMI/DP EDID

v3: Don't leak vga switcheroo EDID in LVDS init (Ville)

v2: Don't leak opregion fallback EDID (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/eabb4de932841b38b34cc2818ea9fbf7c10224fd.1674643465.git.jani.nikula@intel.com

drm/i915/params: use generics for parameter debugfs file creation

Replace the __builtin_strcmp() if ladder with generics.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230118151800.3669913-4-jani.nikula@intel.com

drm/i915/params: use generics for parameter free

Replace the __builtin_strcmp() if ladder with generics.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230118151800.3669913-3-jani.nikula@intel.com

drm/i915/params: use generics for parameter dup

Replace the __builtin_strcmp() if ladder with generics.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230118151800.3669913-2-jani.nikula@intel.com

drm/i915/params: use generics for parameter printing

Replace the __builtin_strcmp() if ladder with generics.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230118151800.3669913-1-jani.nikula@intel.com

drm/i915/display: add intel_display_limits.h for key enums

Move a handful of key enums to a new file intel_display_limits.h. These
are the enum types, and the MAX/NUM enumerations within them, that are
used in other headers. Otherwise, there's no common theme between them.

Replace intel_display.h include with intel_display_limit.h where
relevant, and add the intel_display.h include directly in the .c files
where needed.

Since intel_display.h is used almost everywhere in display/, include it
from intel_display_types.h to avoid massive changes across the
board. There are very few files that would need intel_display_types.h
but not intel_display.h so this is neglible, and further cleanup between
these headers can be left for the future.

Overall this change drops the direct and indirect dependencies on
intel_display.h from about 300 to about 100 compilation units, because
we can drop the include from i915_drv.h.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230116164644.1752009-1-jani.nikula@intel.com

drm/i915/gmch: move VGA set state to GMCH code

This is the only user for the GMCH bridge device in display. Move it to
GMCH code.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9bd50fe508246a547cf6e7abfe44ed686a4b3e3a.1673958757.git.jani.nikula@intel.com

drm/i915/gmch: mass rename dev_priv to i915

Prefer the contemporary naming.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3e4aaadeb4a027165f5724027963aa5e8d747190.1673958757.git.jani.nikula@intel.com

drm/i915/gmch: split out soc/intel_gmch

The GMCH related code is a bit too low level and out of place for the
high level i915_driver.c file. Split out to a separate file under
soc/. Rename the functions accordingly.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/980a5e08b397bc0dbccf93cd84798772233ce75c.1673958757.git.jani.nikula@intel.com

drm/i915: add gmch substruct to struct drm_i915_private

Group the GMCH related members together.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c10c8f16cb5d12041e009f788bd9810225d6962d.1673958757.git.jani.nikula@intel.com

drm/i915/audio: Clean up the PCH type checks

Use explicit PCH type checks to make it more clear
which platforms use which codepaths.

Also reorder the branches in ibx_audio_regs_init()
a bit to be more in chronological order.

Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230124144628.4649-14-ville.syrjala@linux.intel.com

drm/i915/audio: s/ilk/ibx/

Rename the ilk stuff to ibx, as the audio logic lives
in the PCH. The only exception are VLV/CHV but their audio
hardware was stolen from ibx so the name still fits.

Also most of the register defines also use the IBX namespace.

Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230124144628.4649-13-ville.syrjala@linux.intel.com

drm/i915/audio: Include ELD in the state dump

Include the ELD has a hex blob in the crtc state dump.

Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230124144628.4649-12-ville.syrjala@linux.intel.com

drm/i915/audio: Hook up ELD into the state checker

Have the state checker validate the ELD. For now we'll
just dump it out as a hex buffer on a mismatch, maybe
someone will get inspired to decode it properly at some
point...

Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230124144628.4649-11-ville.syrjala@linux.intel.com

drm/i915/sdvo: Do ELD hardware readout

Read out the ELD from the hw so the state checker can verify it.

v2: Check the "ELD valid" bit separately
v3: Fix ELD tx rate handling during readout

Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com> #v1
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230124144628.4649-10-ville.syrjala@linux.intel.com

drm/i915/sdvo: Only use "presence detect" for has_audio readout

Align the SDVO audio code with the native HDMI/DP audio and
use just the "presence detect" bit for the has_audio readout.
The "ELD valid" bit will be used for ELD readout soon.

Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230124144628.4649-9-ville.syrjala@linux.intel.com

drm/i915/sdvo: Precompute the ELD

Use the precomputed crtc_state->eld for audio setup on SDVO
just like we do with native HDMI.

Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230124144628.4649-8-ville.syrjala@linux.intel.com

drm/i915/audio: Hardware ELD readout

Read out the ELD from the hardware buffer, or from our stashed
copy for the audio component, so that we can hook up the state
checker to validate it.

v2: Deal with the platforms using acomp

Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com> #v1
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230124144628.4649-7-ville.syrjala@linux.intel.com

drm/i915/audio: Don't enable audio with bogus ELD

Currently we just print a debug message if the ELD is bogus.
Maybe we should just not enable audio at all in that case?

Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230124144628.4649-6-ville.syrjala@linux.intel.com

drm/i915/audio: Precompute the ELD

Stash the ELD into the crtc_state and precompute it. This gets
rid of the ugly ELD mutation during intel_audio_codec_enable(),
and opens the door for the state checker.

v2: Make another copy for the acomp hooks (Chaitanya)
    Split out the bogus ELD handling change (Jani)

Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com> #v1
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230124144628.4649-5-ville.syrjala@linux.intel.com

drm/i915/audio: Introduce a struct for the acomp audio state

Currently we're spreading the stashed state for use of the
audio component hooks all over the place. Start collecting
it up into a single spot.

Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230124144628.4649-4-ville.syrjala@linux.intel.com

drm/i915/audio: Don't program the hardware ELD buffer on hsw+

Since we use the audio component to transfer the ELD to the audio
driver on hsw+ platforms there is no point in even programming
the hardware ELD buffer. Stop doing so.

The one slight caveat here is that this is not strictly legal
according to the HDA spec. PD=1;ELD=0 is only documented as
an intermediate state during modeset. But if there is no hardware
that depends on that then I guess we're fine. Or we could
perhaps set ELD=1 without actually programming the buffer?

Note that the bspec sequence of PD=0;ELD=0 -> PD=1;ELD=0 ->
PD=1;ELD=1 is also not strictly correct according to the HDA
spec, as the only documented transition from PD=0;ELD=0 is
straight to PD=1;ELD=1.

Additionally on hsw/bdw the hardware buffer is tied in with the
dedicated display HDA controller's power state, so currently
we mostly fail at proramming the buffer anyway. When the HDA
side is not sufficiently powered up the ELD address bits get
stuck and the ELD data register accesses go nowhere.

Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
References: https://lore.kernel.org/intel-gfx/20221012104936.30911-1-ville.syrjala@linux.intel.com/
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230124144628.4649-3-ville.syrjala@linux.intel.com

drm/i915/audio: Don't program the hardware ELD buffer on ilk+

Since we use the audio component to transfer the ELD to the audio
driver on ilk+ platforms there is no point in even programming
the hardware ELD buffer. Stop doing so.

The one slight caveat here is that this is not strictly legal
according to the HDA spec. PD=1;ELD=0 is only documented as
an intermediate state during modeset. But if there is no hardware
that depends on that then I guess we're fine. Or we could
perhaps set ELD=1 without actually programming the buffer?

Note that the bspec sequence of PD=0;ELD=0 -> PD=1;ELD=0 ->
PD=1;ELD=1 is also not strictly correct according to the HDA
spec, as the only documented transition from PD=0;ELD=0 is
straight to PD=1;ELD=1. But that is not even possible on
these platforms as the bits live in different registers.

Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230124144628.4649-2-ville.syrjala@linux.intel.com

Merge drm/drm-next into drm-intel-next

Backmerge to get the EDID handling changes.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge tag 'drm-misc-next-2023-01-24' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v6.3:

UAPI Changes:

Cross-subsystem Changes:

Core Changes:

 * EDID: Improved mode parsing and refactoring

 * fbdev: Cleanups

 * format-helper: Add conversion from XRGB8888 to XBGR8888 and ABGR8888

Driver Changes:

 * accel/ivpu: Add driver for Intel VPU accelerator

 * bridge: Support i.MX93 LDB plus DT bindings

 * exynos: Fixes

 * panel: vtdr6130: Fixes; Support AUO A030JTN01 plus DT bindings

 * simpledrm: Support system-memory framebuffers plus DT bindings

 * ssd130x: Fix sparse warning

Signed-off-by: Dave Airlie <airlied@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmPQN9YACgkQaA3BHVML
# eiNmmQf/bTV3oaMo55i3tYxhMCWYDtPVk+GGglDAykW7Lid8pvy6mJqJoW6uvgQF
# c6CcoY+6yG2WvnVLhXyhPaACiG5weQSdu3S/DdZ2nuJCb50YCwWNNKcu3qYnLVlz
# 2NQ/s0HN+Xvvy76GJFNarKlxSNADPWCNJ8wExAdBkWr7q8NiDfsWuMGrQRQORrm3
# zEkSJPKtWNHa+vmsQOO9yebD0LFx97CoU40FrVXZTtF0FugGIXjiknQwekzuFxdY
# fGBiFKsI+Y3s51gAppbmRRJ0jGLj3KDF5S+5GM8FNbgJQF67Wxttl/YtY6lJGcsa
# l0vpRoCe1ilhNVvoikzAu7UewkPKKA==
# =GLLt
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 25 Jan 2023 05:56:06 AEST
# gpg:                using RSA key 7217FBAC8CE9CF6344A168E5680DC11D530B7A23
# gpg: Can't check signature: No public key
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y9A5ceDknyQixM3R@linux-uq9g

Merge tag 'amd-drm-next-6.3-2023-01-20' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-6.3-2023-01-20:

amdgpu:
- Secure display fixes
- Fix scaling
- Misc code cleanups
- Display BW alloc logic updates
- DCN 3.2 fixes
- Fix power reporting on certain firmwares for CZN/RN
- SR-IOV fixes
- Link training cleanup and code rework
- HDCP fixes
- Reserved VMID fix
- Documentation updates
- Colorspace fixes
- RAS updates
- GC11.0 fixes
- VCN instance harvesting fixes
- DCN 3.1.4/5 workarounds for S/G displays
- Add PCIe info to the INFO IOCTL

amdkfd:
- XNACK fix

UAPI:
- Add PCIe gen/lanes info to the amdgpu INFO IOCTL
  Nesa ultimately plans to use this to make decisions about buffer placement optimizations
  Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20790

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120234523.7610-1-alexander.deucher@amd.com

drm/i915/dmc: Use unversioned path for ADLP

The new DMC release for ADLP (v2.18) in linux-firmware adopted the new
convention of using unversioned filenames, so update the driver code for
that new release. Keep the latest versioned path as fallback so we do
not cause regressions.

Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230123182021.31239-3-gustavo.sousa@intel.com

drm/i915/dmc: Prepare to use unversioned paths

New DMC releases in linux-firmware will stop using version number in
blob filenames. This new convention provides the following benefits:

  1. It simplifies code maintenance, as new DMC releases for a platform
     using the new convention will always use the same filename for the
     blob.

  2. It allows DMC to be loaded even if the target system does not have
     the most recent firmware installed.

Prepare the driver by:

  - Using the new convention for DMC_PATH() and renaming the currently
    used one to make it clear it is for the legacy scheme.

  - Implementing a fallback mechanism for future transitions from
    versioned to unversioned paths so that we do not cause a regression
    for systems not having the most up-to-date linux-firmware files.

v2:
  - Keep using request_firmware() instead of firmware_request_nowarn().
    (Jani)
v3:
  - Keep current DMC paths instead of directly using unversioned ones,
    so that we do not disturb initrd generation.
    (Lucas, Rodrigo)

Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230123182021.31239-2-gustavo.sousa@intel.com

Merge tag 'drm-misc-next-2023-01-19' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for $kernel-version:

UAPI Changes:

Cross-subsystem Changes:

Core Changes:

 * Cleanup unneeded include statements wrt <linux/fb.h>, <drm/drm_fb_helper.h>
   and <drm/drm_crtc_helper.h>

 * Remove unused helper DRM_DEBUG_KMS_RATELIMITED()

 * fbdev: Remove obsolete aperture field from struct fb_device, plus
   driver cleanups; Remove unused flag FBINFO_MISC_FIRMWARE

 * MIPI-DSI: Fix brightness, plus rsp. driver updates

 * scheduler: Deprecate drm_sched_resubmit_jobs()

 * ttm: Fix MIPS build; Remove ttm_bo_wait(); Documentation fixes

Driver Changes:

 * Remove obsolete drivers for userspace modesetting i810, mga, r128,
   savage, sis, tdfx, via

 * bridge: Support CDNS DSI J721E, plus DT bindings; lt9611: Various
   fixes and improvements; sil902x: Various fixes; Fixes

 * nouveau: Removed support for legacy ioctls; Replace zero-size array;
   Cleanups

 * panel: Fixes

 * radeon: Use new DRM logging helpers

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y8kDk5YX7Yz3eRhM@linux-uq9g

Merge tag 'drm-intel-gt-next-2023-01-18' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

Driver Changes:

Fixes/improvements/new stuff:

- Fix workarounds on Gen2-3 (Tvrtko Ursulin)
- Fix HuC delayed load memory leaks (Daniele Ceraolo Spurio)
- Fix a BUG caused by impendance mismatch in dma_fence_wait_timeout and GuC (Janusz Krzysztofik)
- Add DG2 workarounds Wa_18018764978 and Wa_18019271663 (Matt Atwood)
- Apply recommended L3 hashing mask tuning parameters (Gen12+) (Matt Roper)
- Improve suspend / resume times with VT-d scanout workaround active (Andi Shyti, Chris Wilson)
- Silence misleading "mailbox access failed" warning in snb_pcode_read (Ashutosh Dixit)
- Fix null pointer dereference on HSW perf/OA (Umesh Nerlige Ramappa)
- Avoid trampling the ring during buffer migration (and selftests) (Chris Wilson, Matthew Auld)
- Fix DG2 visual corruption on small BAR systems by not forgetting to copy CCS aux state (Matthew Auld)
- More fixing of DG2 visual corruption by not forgetting to copy CCS aux state of backup objects (Matthew Auld)
- Fix TLB invalidation for Gen12.50 video and compute engines (Andrzej Hajda)
- Limit Wa_22012654132 to just specific steppings (Matt Roper)
- Fix userspace crashes due eviction not working under lock contention after the object locking conversion (Matthew Auld)
- Avoid double free is user deploys a corrupt GuC firmware (John Harrison)
- Fix 32-bit builds by using "%zu" to format size_t (Nirmoy Das)
- Fix a possible BUG in TTM async unbind due not reserving enough fence slots (Nirmoy Das)
- Fix potential use after free by not exposing the GEM context id to userspace too early (Rob Clark)
- Show clamped PL1 limit to the user (hwmon) (Ashutosh Dixit)
- Workaround unreliable reset on Jasperlake (Chris Wilson)
- Cover rest of SVG unit MCR registers (Gustavo Sousa)
- Avoid PXP log spam on platforms which do not support the feature (Alan Previn)
- Re-disable RC6p on Sandy Bridge to avoid GPU hangs and visual glitches (Sasa Dragic)

Future platform enablement:

- Manage uncore->lock while waiting on MCR register (Matt Roper)
- Enable Idle Messaging for GSC CS (Vinay Belgaumkar)
- Only initialize GSC in tile 0 (José Roberto de Souza)
- Media GT and Render GT share common GGTT (Aravind Iddamsetty)
- Add dedicated MCR lock (Matt Roper)
- Implement recommended caching policy (PVC) (Wayne Boyer)
- Add hardware-level lock for steering (Matt Roper)
- Check full IP version when applying hw steering semaphore (Matt Roper)
- Enable GuC GGTT invalidation from the start (Daniele Ceraolo Spurio)
- MTL GSC firmware support (Daniele Ceraolo Spurio, Jonathan Cavitt)
- MTL OA support (Umesh Nerlige Ramappa)
- MTL initial gt workarounds (Matt Roper)

Driver refactors:

- Hold forcewake and MCR lock over PPAT setup (Matt Roper)
- Acquire fw before loop in intel_uncore_read64_2x32 (Umesh Nerlige Ramappa)
- GuC filename cleanups and use submission API version number (John Harrison)
- Promote pxp subsystem to top-level of i915 (Alan Previn)
- Finish proofing the code agains object size overflows (Chris Wilson, Gwan-gyeong Mun)
- Start adding module oriented dmesg output (John Harrison)

Miscellaneous:

- Correct kerneldoc for intel_gt_mcr_wait_for_reg() (Matt Roper)
- Bump up sample period for busy stats selftest (Umesh Nerlige Ramappa)
- Make GuC default_lists const data (Jani Nikula)
- Fix table order verification to check all FW types (John Harrison)
- Remove some limited use register access wrappers (Jani Nikula)
- Remove struct_member macro (Andrzej Hajda)
- Remove hardcoded value with a macro (Nirmoy Das)
- Use helper func to find out map type (Nirmoy Das)
- Fix a static analysis warning (John Harrison)
- Consolidate VMA active tracking helpers (Andrzej Hajda)
- Do not cover all future platforms in TLB invalidation (Tvrtko Ursulin)
- Replace zero-length arrays with flexible-array members (Gustavo A. R. Silva)
- Unwind hugepages to drop wakeref on error (Chris Wilson)
- Remove a couple of superfluous i915_drm.h includes (Jani Nikula)

Merges:

- Merge drm/drm-next into drm-intel-gt-next (Rodrigo Vivi)

danvet: Fix up merge conflict in intel_uc_fw.c, we ended up with 2
copies of try_firmware_load() somehow.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y8fW2Ny1B1hZ5ZmF@tursulin-desk

drm/i915: update src and dst scaler limits for display ver 12 and 13

The bspec has been updated and now display versions 12 and 13 support
source width up to 5120 pixels, source height up to 8192 lines,
destination width up to 8192 and destination height up to 8192.

Update the code accordingly.

BSpec: 50441
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230113113905.130405-1-luciano.coelho@intel.com

drm/ssd130x: Silence a `dubious: x & !y` warning

The sparse tool complains with the following warning:

$ make M=drivers/gpu/drm/solomon/ C=2
  CC [M]  drivers/gpu/drm/solomon/ssd130x.o
  CHECK   drivers/gpu/drm/solomon/ssd130x.c
drivers/gpu/drm/solomon/ssd130x.c:363:21: warning: dubious: x & !y

This seems to be a false positive in my opinion but still we can silence
the tool while making the code easier to read. Let's also add a comment,
to explain why the "com_seq" logical not is used rather than its value.

Reported-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230121190930.2804224-1-javierm@redhat.com

fbdev: Remove unused struct fb_deferred_io .first_io field

This optional callback was added in the commit 1f45f9dbb392 ("fb_defio:
add first_io callback") but it was never used by a driver. Let's remove
it since it's unlikely that will be used after a decade that was added.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230121192418.2814955-2-javierm@redhat.com

drm/simpledrm: Support the XB24/AB24 format

Add XB24 and AB24 to the list of supported formats. The format helpers
support conversion to these formats and they are documented in the
simple-framebuffer device tree bindings.

Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120173103.4002342-8-thierry.reding@gmail.com

drm/format-helper: Support the AB24/XB24 formats

Add a conversion helper for the AB24 and XB24 formats to use in
drm_fb_blit().

Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120173103.4002342-7-thierry.reding@gmail.com

drm/simpledrm: Add support for system memory framebuffers

Simple framebuffers can be set up in system memory, which cannot be
requested and/or I/O remapped using the I/O resource helpers. Add a
separate code path that obtains system memory framebuffers from the
reserved memory region referenced in the memory-region property.

Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120173103.4002342-6-thierry.reding@gmail.com

drm/simpledrm: Use struct iosys_map consistently

The majority of the driver already uses struct iosys_map to encapsulate
accesses to I/O remapped vs. system memory. Accesses via the screen base
pointer still use __iomem annotations, which can lead to inconsistencies
and conflicts with subsequent patches.

Convert the screen base to a struct iosys_map as well for consistency
and to avoid these issues.

Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120173103.4002342-5-thierry.reding@gmail.com

dt-bindings: reserved-memory: Support framebuffer reserved memory

Document the "framebuffer" compatible string for reserved memory nodes
to annotate reserved memory regions used for framebuffer carveouts.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120173103.4002342-4-thierry.reding@gmail.com

dt-bindings: display: simple-framebuffer: Document 32-bit BGR format

This is a variant of the 32-bit RGB format where the red and blue
components are swapped.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120173103.4002342-3-thierry.reding@gmail.com

dt-bindings: display: simple-framebuffer: Support system memory framebuffers

In order to support framebuffers residing in system memory, allow the
memory-region property to override the framebuffer memory specification
in the "reg" property.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120173103.4002342-2-thierry.reding@gmail.com

drm/edid: remove redundant _drm_connector_update_edid_property()

Realize that drm_edid_connector_update() and
_drm_connector_update_edid_property() are now the same thing. Drop the
latter.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/712cc299afe33d8f6279a15d5b0117aeeab88bb4.1674144945.git.jani.nikula@intel.com

drm/edid: add separate drm_edid_connector_add_modes()

The original goal with drm_edid_connector_update() was to have a single
call for updating the connector and adding probed modes, in this order,
but that turned out to be problematic. Drivers that need to update the
connector in the .detect() callback would end up updating the probed
modes as well. Turns out the callback may be called so many times that
the probed mode list fills up without bounds, and this is amplified by
add_alternate_cea_modes() duplicating the CEA modes on every call,
actually running out of memory on some machines.

Kudos to Imre Deak <imre.deak@intel.com> for explaining this to me.

Go back to having separate drm_edid_connector_update() and
drm_edid_connector_add_modes() calls. The former may be called from
.detect(), .force(), or .get_modes(), but the latter only from
.get_modes().

Unlike drm_add_edid_modes(), have drm_edid_connector_add_modes() update
the probed modes from the EDID property instead of the passed in
EDID. This is mainly to enforce two things:

1) drm_edid_connector_update() must be called before
   drm_edid_connector_add_modes().

   Display info and quirks are needed for parsing the modes, and we
   don't want to call update_display_info() again to ensure the info is
   available, like drm_add_edid_modes() does.

2) The same EDID is used for both updating the connector and adding the
   probed modes.

Fortunately, the change is easy, because no driver has actually adopted
drm_edid_connector_update(). Not even i915, and that's mainly because of
the problem described above.

Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e86fff1579f14ebf6334692526c8f6831cd02cac.1674144945.git.jani.nikula@intel.com

drm/edid: refactor _drm_edid_connector_update() and rename

By moving update_display_info() out of _drm_edid_connector_update() we
make the function purely about adding modes. Rename accordingly.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e9880bbb2b5724d9aac88a90a31ba3ba9af9da3f.1674144945.git.jani.nikula@intel.com

drm/edid: split HDMI VSDB info and mode parsing

Separate the parsing of display info and modes from the HDMI VSDB. This
is prerequisite work for overall better separation of the two parsing
steps.

The info parsing is about figuring out whether the sink supports HDMI
infoframes. Since they were added in HDMI 1.4, assume the sink supports
HDMI infoframes if it has the HDMI_Video_present bit set (introduced in
HDMI 1.4). For details, see commit f1781e9bb2dd ("drm/edid: Allow HDMI
infoframe without VIC or S3D").

The logic is not exactly the same, but since it was somewhat heuristic
to begin with, assume this is close enough.

v2:
- Simplify to only check HDMI_Video_present bit (Ville)
- Drop cea_db_raw_size() helper (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/238e15f7ab15a86f7fd1812271dcaec9bc6e1506.1674144945.git.jani.nikula@intel.com

drm/bridge: fsl-ldb: Add i.MX93 LDB support

Same to i.MX8mp LDB, i.MX93 LDB is controlled by mediamix blk-ctrl
through LDB_CTRL and LVDS_CTRL registers.  i.MX93 LDB supports only
one LVDS channel(channel 0) and it's LVDS_CTRL register bit1 is used
as LVDS_EN instead of CH1_EN.  Add i.MX93 LDB support in the existing
i.MX8mp LDB bridge driver by adding i.MX93 LDB compatible string and
device data(to reflect different register offsets and LVDS_CTRL register
bit1 definition).

Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230123021449.969243-3-victor.liu@nxp.com

dt-bindings: display: bridge: ldb: Add i.MX93 LDB

Same to i.MX8mp LDB, i.MX93 LDB is controlled by mediamix blk-ctrl
through 'ldb' register and 'lvds' register.  Also, the 'ldb' clock
is required.  i.MX93 LDB supports only one LVDS channel(channel 0,
a.k.a, LVDS Channel-A in the device tree binding documentation), while
i.MX8mp LDB supports at most two.  Add i.MX93 LDB device tree binding
in the existing i.MX8mp LDB device tree binding documentation.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230123021449.969243-2-victor.liu@nxp.com

drm/panel: Add driver for the AUO A030JTN01 TFT LCD

Add driver for the AUO A030JTN01 panel, which is a 320x480 3.0" 4:3
24-bit TFT LCD panel with non-square pixels and a delta-RGB 8-bit
interface.

Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230121162419.284523-3-cbranchereau@gmail.com

dt-bindings: display/panel: Add AUO A030JTN01

Add binding for the AUO A030JTN01 panel, which is a 320x480 3.0" 4:3
24-bit TFT LCD panel with non-square pixels and a delta-RGB 8-bit
interface.

Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230121162419.284523-2-cbranchereau@gmail.com

drm/i915: Enable a PIPEDMC whenever its corresponding pipe is enabled

Make sure that PIPEDMCs are enabled whenever the corresponding pipe is
enabled.

This is required at least by the latest ADLP v2.18 firmware, which adds
a new handler enabled by default and running whenever the pipe is
enabled at the vertical referesh rate.

Bspec: 50344, 67620

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230102183324.862279-1-imre.deak@intel.com

drm/i915/debugfs: Get rid of single use macros.

No good reason for these indirection cases.

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120110658.1083757-1-rodrigo.vivi@intel.com

drm: exynos: dsi: Properly name HSA/HBP/HFP/HSE bits

HSA/HBP/HFP/HSE mode bits in Processor Reference Manuals specify
a naming conversion as 'disable mode bit' due to its bit definition,
0 = Enable and 1 = Disable.

For HSE bit, the i.MX 8M Mini/Nano/Plus Applications Processor
Reference Manual named this bit as 'HseDisableMode' but the bit
definition is quite opposite like
0 = Disables transfer
1 = Enables transfer
which clearly states that HSE is not a disable bit.

HSE is named as per the manual even though it is not a disable
bit however the driver logic for handling HSE is based on the
MIPI_DSI_MODE_VIDEO_HSE flag itself.

Cc: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221212145745.15387-2-jagan@amarulasolutions.com

drm: exynos: dsi: Fix MIPI_DSI*_NO_* mode flags

HFP/HBP/HSA/EOT_PACKET modes in Exynos DSI host specifies
0 = Enable and 1 = Disable.

The logic for checking these mode flags was correct before
the MIPI_DSI*_NO_* mode flag conversion.

This patch is trying to fix this MIPI_DSI*_NO_* mode flags handling
Exynos DSI host and update the mode_flags in relevant panel drivers.

Fixes: 0f3b68b66a6d ("drm/dsi: Add _NO_ to MIPI_DSI_* flags disabling features")
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Reported-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221212145745.15387-1-jagan@amarulasolutions.com

MAINTAINERS: Add Sumit Semwal and Yongqin Liu as reviwers for kirin DRM driver

I no longer have access to the HiKey boards, so while I'm happy to
review code, I wanted to add Sumit and Yongqin to the reviewers list
so they would get CC'ed on future changes and would be able to have
a chance to validate and provide Tested-by: tags

Cc: Xinliang Liu <xinliang.liu@linaro.org>
Cc: Tian Tao <tiantao6@hisilicon.com>
Cc: Yongqin Liu <yongqin.liu@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: kernel-team@android.com
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120060956.1244187-1-jstultz@google.com

drm/i915: move GT_FREQUENCY_MULTIPLIER and GEN9_FREQ_SCALER to intel_rps.h

Declutter i915_drv.h.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230118131538.3558599-7-jani.nikula@intel.com

drm/i915: move I915_COLOR_UNEVICTABLE to i915_gem_gtt.h

Declutter i915_drv.h.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230118131538.3558599-6-jani.nikula@intel.com

drm/i915: move I915_GEM_GPU_DOMAINS to i915_gem.h

Declutter i915_drv.h.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230118131538.3558599-5-jani.nikula@intel.com

drm/i915: move a few HAS_ macros closer to their place

There's not that much organization with where the various HAS_FEATURE()
macros are placed, but at least try to group them closer together.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230118131538.3558599-4-jani.nikula@intel.com

drm/i915: drop a number of unnecessary forward declarations

Remove leftovers from earlier cleanups.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230118131538.3558599-3-jani.nikula@intel.com

drm/i915: move I915_IDLE_ENGINES_TIMEOUT next to its only user

Declutter i915_drv.h. If there's ever a need to use this in more than
one place, we can figure out a better spot then. For now, this seems
easiest.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230118131538.3558599-2-jani.nikula@intel.com

drm/i915: add i915_config.h and move relevant declarations there

We already have i915_config.c. Add the i915_config.h counterpart, and
declutter i915_drv.h in the process.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230118131538.3558599-1-jani.nikula@intel.com

Documentation/gpu: update dGPU asic info table

Update to the latest launched dGPUs.

Link: https://www.amd.com/en/graphics/radeon-rx-graphics
Link: https://www.amd.com/en/graphics/amd-radeon-rx-laptops
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove duplicate included header files

resource.h is included more than once.

Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: return the PCIe gen and lanes from the INFO ioctl

For computing PCIe bandwidth in userspace and troubleshooting PCIe
bandwidth issues. Note that this intentionally fills holes and padding
in drm_amdgpu_info_device.

Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20790

Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: print bo inode number instead of ptr

This allows to correlate the infos printed by
/sys/kernel/debug/dri/n/amdgpu_gem_info to the ones found
in /proc/.../fdinfo and /sys/kernel/debug/dma_buf/bufinfo.

Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: retire unused get_umc_v6_7_channel_index

Fix the following compile warning:

drivers/gpu/drm/amd/amdgpu/umc_v6_7.c:53:24: warning: unused function 'get_umc_v6_7_channel_index' [-Wunused-function]
static inline uint32_t get_umc_v6_7_channel_index(struct amdgpu_device *adev,
                          ^
1 warning generated.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Optimize sdma ras block initialization code for sdma v4_0

Optimize sdma ras block initialization code for sdma v4_0.

Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix hdmi_encoded_link_bw definition

Some of the data structures are hidden when CONFIG_DRM_AMD_DC_DCN is
disabled, which leads to a link failure:

drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_dp_capability.c:234:21: error: 'union hdmi_encoded_link_bw' declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
  234 |         const union hdmi_encoded_link_bw hdmi_encoded_link_bw)
      |                     ^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_dp_capability.c:234:42: error: parameter 2 ('hdmi_encoded_link_bw') has incomplete type
  234 |         const union hdmi_encoded_link_bw hdmi_encoded_link_bw)
      |         ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_dp_capability.c:232:17: error: function declaration isn't a prototype [-Werror=strict-prototypes]
  232 | static uint32_t intersect_frl_link_bw_support(
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_dp_capability.c: In function 'get_active_converter_info':
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_dp_capability.c:1126:76: error: storage size of 'hdmi_encoded_link_bw' isn't known
 1126 |                                                 union hdmi_encoded_link_bw hdmi_encoded_link_bw;
      |                                                                            ^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_dp_capability.c:1130:101: error: 'struct <anonymous>' has no member named 'MAX_ENCODED_LINK_BW_SUPPORT'
 1130 |                                                                                 hdmi_color_caps.bits.MAX_ENCODED_LINK_BW_SUPPORT);

There is probably no need to hide the data structure, and removing
the #ifdef makes it build cleanly.

Fixes: d5a43956b73b ("drm/amd/display: move dp capability related logic to link_dp_capability")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix dp_retrieve_lttpr_cap() return value

gcc-13 notices a mismatch between the return type of dp_retrieve_lttpr_cap()
and the returned value:

drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_dp_capability.c: In function 'dp_retrieve_lttpr_cap':
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_dp_capability.c:1465:24: error: implicit conversion from 'enum <anonymous>' to 'enum dc_status' [-Werror=enum-conversion]
 1465 |                 return false;
      |                        ^~~~~

Change the value to an actual dc_status code and remove the bogus
initialization that was apparently meant to get returned here.

Fixes: b473bd5fc333 ("drm/amd/display: refine wake up aux in retrieve link caps")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add sdma ras function on sdma v6_0_3

Add sdma ras function on sdma v6_0_3.

Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: disable S/G display on DCN 3.1.4

Causes flickering or white screens in some configurations.
Disable it for now until we can fix the issue.

Cc: roman.li@amd.com
Cc: yifan1.zhang@amd.com
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: disable S/G display on DCN 3.1.5

Causes flickering or white screens in some configurations.
Disable it for now until we can fix the issue.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2354
Cc: roman.li@amd.com
Cc: yifan1.zhang@amd.com
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: decrease message about missing PSP runtime database to debug

Laptops with APUs from a variety of manufacturers and generations
show a warning about a missing PSP runtime database.

As it's not required for PSP to dump this database into framebuffer,
decrease messages about it missing to debug.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Decrease messaging about DP alt mode state to debug

Currently plugging in a USB-C device that issues an HPD will emit
a warning level message `DP Alt mode state on HPD: %d`.

This is needlessly noisy for most people, decrease it to debug so
that it can be turned on by dynamic debug as needed.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn4: fail to schedule IB for AV1 if VCN0 is harvested

Only VCN0 supports AV1.

Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/soc21: don't expose AV1 if VCN0 is harvested

Only VCN0 supports AV1.

Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn3: fail to schedule IB for AV1 if VCN0 is harvested

Only VCN0 supports AV1.

Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/nv: don't expose AV1 if VCN0 is harvested

Only VCN0 supports AV1.

Reviewed-by: Leo Liu <leo.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Documentation/gpu: Add Raphael to apu-asic-info-table

Raphael launched in 2022 but was missed to add to this table.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Documentation/gpu: Add Mendocino to apu-asic-info-table

Mendocino launched in 2023 and uses the new naming scheme for APU
processors.

Link: https://community.amd.com/t5/corporate/announcing-new-model-numbers-for-2023-mobile-processors/ba-p/543985
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Documentation/gpu: Update lines for GREEN_SARDINE and YELLOW_CARP

These products have launched, so add matching codenames.

Also AMD has announced that both of these products have new refresh
variants that launch in 2023 using the new naming scheme, so add
that information.

Link: https://community.amd.com/t5/corporate/announcing-new-model-numbers-for-2023-mobile-processors/ba-p/543985
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Documentation/gpu: Add MP0 version to apu-asic-info-table

MP0 version is useful to know to figure out which firmware is intended
for a platform.  Add a column for all supported APUs.

v2: squash in column fix (Mario)

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/panel: vtdr6130: fix unused ret in visionox_vtdr6130_bl_update_status

Fix the following warning:
panel-visionox-vtdr6130.c:249:12: warning: 'ret' is used uninitialized [-Wuninitialized]

Fixes: 9402cde9347e ("drm/panel: vtdr6130: Use 16-bit brightness function")
Reported-by: Daniel Vetter <daniel@ffwll.ch>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230119-topic-sm8550-vtdr6130-fixup-v1-1-82c4fb008138@linaro.org

drm/edid: move EDID BPC quirk application to update_display_info()

The BPC quirks are closer to home in update_display_info().

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8997e0fa3b0fd03c920e72d1dff24c0d96ff4dd0.1672826282.git.jani.nikula@intel.com

drm/edid: merge ELD handling to update_display_info()

Simplify display info update by merging ELD handling as well as clearing
of the data in update_display_info().

The connector->eld really should be moved under display_info altogether,
but that's for another time.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1f2e7424b998fbcdd9cea488e7d6d7cbb26c460f.1672826282.git.jani.nikula@intel.com

drm/edid: stop passing quirks around

Now that quirks are stored in display info, we can just look them up
using the connector instead of having to pass them around.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d55049dd9b2e48e63103f2dfa49bc9b25dd57f82.1672826282.git.jani.nikula@intel.com