Geert Uytterhoeven [Wed, 5 Nov 2014 10:04:34 +0000 (11:04 +0100)]
ARM: shmobile: r8a7740 dtsi: Correct IIC0 parent clock
According to the datasheet, the operating clock for IIC0 is the HPP
(RT Peri) clock, not the SUB (Peri) clock. Both clocks run at the same
speed (50 Mhz).
This is consistent with IIC0 being located in the A4R PM domain, and
IIC1 in the A3SP PM domain.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
b89ff7c3c2dee189489a5f45eb8d72e106179299)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Shinobu Uehara [Thu, 30 Oct 2014 05:57:57 +0000 (14:57 +0900)]
ARM: shmobile: r8a7790: Fix SD3CKCR address to device tree
Signed-off-by: Shinobu Uehara <shinobu.uehara.xc@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
edd7b938637701567a54306adb27cfb4345fedc5)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Wed, 5 Nov 2014 10:04:33 +0000 (11:04 +0100)]
ARM: shmobile: r8a7740 legacy: Correct IIC0 parent clock
According to the datasheet, the operating clock for IIC0 is the HPP
(RT Peri) clock, not the SUB (Peri) clock. Both clocks run at the same
speed (50 Mhz).
This is consistent with IIC0 being located in the A4R PM domain, and
IIC1 in the A3SP PM domain.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
4f37828d4d69a46830e0525a065da9847fc7a819)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Wed, 5 Nov 2014 20:59:34 +0000 (21:59 +0100)]
ARM: shmobile: r8a7740 legacy: Add missing INTCA clock for irqpin module
This clock drives the irqpin controller modules.
Before, it was assumed enabled by the bootloader or reset state.
By making it available to the driver, we make sure it gets enabled when
needed, and allow it to be managed by system or runtime PM.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
85eb968e84686faa507daa3c5cfdfbfefc7eda95)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Shinobu Uehara [Thu, 30 Oct 2014 05:57:56 +0000 (14:57 +0900)]
ARM: shmobile: r8a7790: Fix SD3CKCR address
Signed-off-by: Shinobu Uehara <shinobu.uehara.xc@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
a926a12b5f11007d0ba9eb2e083d86054fb29a06)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Tue, 4 Nov 2014 04:23:38 +0000 (13:23 +0900)]
ARM: shmobile: alt dts: Drop console= bootargs parameter
Alt is booted from DT, so chosen/stdout-path is
always used, and we can drop the "console=" parameter from chosen/bootargs.
This change has a side-effect of changing the console speed from 38400
to 115200. This is intentional as 115200 is consistently used on
all other shmobile boards.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
89aeff9989e87bb2d9d652994010bc18c68675d9)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Ulrich Hecht [Tue, 4 Nov 2014 16:21:24 +0000 (17:21 +0100)]
ARM: shmobile: r8a73a4: fix scifb* naming
Ports are named scifb0-3, not scifb2-5.
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
0b3a0ef613538cae4b8b8f41315ef1fd3c957b12)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Phil Edworthy [Tue, 4 Nov 2014 17:38:28 +0000 (17:38 +0000)]
ARM: shmobile: Enable PCI domains for R-Car Gen2 devices
The PCI core will soon automatically handle the PCI domain number,
allowing the internal PCI and external PCIe bridges work at the same time.
In order for that to work, we need to enable PCI_DOMAINS.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
950a3f0e7dd32c372c9957d5c050b08de7ec9e56)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Tue, 4 Nov 2014 01:50:24 +0000 (17:50 -0800)]
ARM: shmobile: multiplatform: add AK4642 support on defconfig
AK4642 is well used audio codec on Renesas reference board
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
ccde0fbd4fe88151c8d3a93a3e3a939a0a1753b2)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Tue, 4 Nov 2014 01:50:13 +0000 (17:50 -0800)]
ARM: shmobile: multiplatform: add Audo DMAC peri peri support on defconfig
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
2315f9fce4da7df9362e4baeb5250d14ea48bf63)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Tue, 4 Nov 2014 01:50:00 +0000 (17:50 -0800)]
ARM: shmobile: multiplatform: add R-Car DMAC support on defconfig
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
eeaeb4b58b31ddc56eff757b5a71ea664726ef60)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Hisashi Nakamura [Fri, 24 Oct 2014 08:33:09 +0000 (17:33 +0900)]
ARM: shmobile: r8a7791: Correct number of CPU cores
The r8a7791 only has 2 CPU CA15 cores, not 4 CA15 and 4 CA7 cores.
Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
7466c52e1706d98392b6a4650b04e94f39f3a794)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Hisashi Nakamura [Fri, 24 Oct 2014 08:33:08 +0000 (17:33 +0900)]
ARM: shmobile: Separate APMU resource data into CPU dependant part
APMU resources are not common to all R-Car SoCs so don't share this data.
A subsequent patch will correct the CPU cores for the r8a7791.
Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
a8d2ff39c7c4a5ce50df2a47d5f8523810dd4c29)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Thu, 30 Oct 2014 01:59:22 +0000 (10:59 +0900)]
ARM: shmobile: ape6evm: Enable PM Runtime in defconfig
This is consistent with other shmobile defconfigs.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
c5940e115e188051f34a88ee705c5f81c6bf0e54)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Koji Matsuoka [Thu, 30 Oct 2014 05:58:55 +0000 (14:58 +0900)]
ARM: shmobile: r8a7794: Add VIN clock to device tree
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
148ebf479aa207406f8208466b3e446f9cd25f4b)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Wed, 29 Oct 2014 14:30:53 +0000 (15:30 +0100)]
ARM: shmobile: kzm9g-reference dts: Drop bogus 0x unit-address prefix
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
76ddbdc3010fbb6d5974545a9e91a8ac7460a243)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Wed, 29 Oct 2014 14:30:52 +0000 (15:30 +0100)]
ARM: shmobile: r8a7791 dtsi: Drop bogus 0x unit-address prefix
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
6b83dc1d03348ec1b1c6879515de1216e060005c)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Wed, 29 Oct 2014 14:30:51 +0000 (15:30 +0100)]
ARM: shmobile: r8a7790 dtsi: Drop bogus 0x unit-address prefix
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
83b4fb6d9034b989075b4887d86b80bd41884d85)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Wed, 29 Oct 2014 14:28:38 +0000 (15:28 +0100)]
ARM: shmobile: koelsch dts: Drop console= bootargs parameter
Koelsch is now restricted to booting from DT, so chosen/stdout-path is
always used, and we can drop the "console=" parameter from chosen/bootargs.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: devicetree@vger.kernel.org
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
79e69d179cb3391040a3693fca8bc12ec03c05fc)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 17 Sep 2014 14:28:02 +0000 (17:28 +0300)]
ARM: shmobile: koelsch: Remove reference board code
The Koelsch board is supported by the r8a7791 generic DT platform
definition. Remove the board-specific definition along with its board
file.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
9e6edccf191fb15ad751796a7962128d2469e209)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 17 Sep 2014 14:25:00 +0000 (17:25 +0300)]
ARM: shmobile: r8a7791: Remove legacy code
All r8a7791 boards are now used with multiplatform kernels only. We can
remove all the unused r8a7791 legacy device and clock registration code.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
74c917076ab96f648b96a39ec1ce7a8a7ed361f5)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Conflicts:
arch/arm/mach-shmobile/setup-r8a7791.c
Laurent Pinchart [Wed, 17 Sep 2014 14:18:27 +0000 (17:18 +0300)]
ARM: shmobile: koelsch: Remove legacy C board code
All features supported by the Koelsch legacy C board code are now
supported by the multiplatform code, it's thus time to say bye to the
legacy code. Nobody should miss it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
7d6a399cf759a3f1d925a85ff37d6a1b6197ec82)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Conflicts:
arch/arm/mach-shmobile/board-koelsch.c
Laurent Pinchart [Sun, 26 Oct 2014 13:07:32 +0000 (15:07 +0200)]
ARM: shmobile: Remove shmobile_clk_workaround() implementation
The function isn't used or needed anymore, remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
b6c461d2791ce738bf14fc796e65b9a00072de96)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Wed, 29 Oct 2014 14:09:39 +0000 (15:09 +0100)]
ARM: shmobile: r8a7790 dtsi: Remove unnecessary MMC options
As of commit
423f6c2e977de73b ("mmc: sdhi: update sh_mobile_sdhi_of_data
for r8a7790"), the driver takes care of r8a7790 specific MMC options.
Hence they can be removed from the dtsi.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
[geert: Rebased, reworded, added reference]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
[simon: Rebased]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
a6190fd042c19e1abd0b7225e75929e5005587c9)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Wed, 29 Oct 2014 14:09:38 +0000 (15:09 +0100)]
ARM: shmobile: r8a7779 dtsi: Remove unnecessary MMC options
As of commit
81bbbc7278fa109f ("mmc: sdhi: update sh_mobile_sdhi_of_data
for r8a7779"), the driver takes care of r8a7779 specific MMC options.
Hence they can be removed from the dtsi.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
[geert: Rebased, reworded, added reference]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
92e044aed5aede573ffa1ba2c99212024356e851)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Wed, 29 Oct 2014 14:09:37 +0000 (15:09 +0100)]
ARM: shmobile: r8a7778 dtsi: Remove unnecessary MMC options
As of commit
b3a5d4ce65162d27 ("mmc: sdhi: update sh_mobile_sdhi_of_data
for r8a7778), the driver takes care of r8a7778 specific MMC options.
Hence they can be removed from the dtsi.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
[geert: Rebased, reworded, added reference]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
a9ad9a47485a979397a2546d0ad5b9cf455e8857)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Wed, 29 Oct 2014 13:58:51 +0000 (14:58 +0100)]
ARM: shmobile: r8a7779 dtsi: Add SoC-specific SATA compatible property
The SATA node used the generic compatible property only, which was
deprecated by commit
e67adb4e669db834 ("sata_rcar: Add R-Car Gen2 SATA
PHY support"). Add the SoC-specific one introduced by that commit.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
25af9c83151822eb6d413b4d15d5f89804606ac7)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Sun, 26 Oct 2014 17:40:14 +0000 (19:40 +0200)]
ARM: shmobile: r8a7791: Reference DMA channels in MMCIF DT node
Add references to the transmit and receive DMA channels in the MMCIF
node.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
16b355b4aa234f4358c288e931e4cdefbbcfc4b0)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Sun, 26 Oct 2014 17:40:13 +0000 (19:40 +0200)]
ARM: shmobile: r8a7790: Reference DMA channels in MMCIF DT nodes
Add references to the transmit and receive DMA channels in the two
MMCIF nodes.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
108216c1e08db6c69a54ba7ee593335eceea2077)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Sun, 26 Oct 2014 17:40:12 +0000 (19:40 +0200)]
ARM: shmobile: r8a7791: Add MMCIF0 DT node
Add the MMCIF0 device to the r8a7791 device tree.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
8edae499162c30af16f0b8a77d394c19791ae372)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Sun, 26 Oct 2014 17:40:11 +0000 (19:40 +0200)]
ARM: shmobile: r8a7790: Rename mmcif node to mmc
Node names should describe the function of the device, not its IP core
name.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
22c2b78d3131cd161599be7a9f320523969b23c4)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Fri, 24 Oct 2014 11:36:03 +0000 (13:36 +0200)]
ARM: shmobile: r8a7778: Add SoC-specific TMU compatible property
The TMU timers used the generic compatible property only.
Add the SoC-specific one, to make it future proof.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
45b439c1aae45d344c55864f81d52ef90ce4d8f8)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Fri, 24 Oct 2014 11:36:02 +0000 (13:36 +0200)]
ARM: shmobile: r8a73a4: Add SoC-specific CMT compatible property
The CMT1 timer used the generic compatible property only.
Add the SoC-specific one, which is already documented, to make it future
proof.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
2cd823fc01d61e09f50d64624ec53da090ced742)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Yoshihiro Shimoda [Fri, 24 Oct 2014 10:45:08 +0000 (19:45 +0900)]
ARM: shmobile: henninger: enable HS-USB
Enable HS-USB device for the Henninger board, defining the GPIO that the driver
should check when probing (which is the ID output from MAX3355 OTG chip).
Note that there will be pinctrl-related error messages if both internal PCI
and HS-USB drivers are enabled but they should be just ignored.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
[Sergei: added pin function/group and prop, moved device node, fixed summary,
added changelog]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
6f4f7156e0e6b215fad118abf4830177528ef7ad)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Yoshihiro Shimoda [Fri, 24 Oct 2014 10:45:07 +0000 (19:45 +0900)]
ARM: shmobile: koelsch: enable HS-USB
Enable HS-USB device for the Koelsch board, defining the GPIO that the driver
should check when probing (which is the ID output from MAX3355 OTG chip).
Note that there will be pinctrl-related error messages if both internal PCI
and HS-USB drivers are enabled but they should be just ignored.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
[Sergei: added pin function/group and prop, moved device node, fixed summary,
added changelog]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
fc4a00b78c7f8a770b9608164c0c9cdd0e4e68c2)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Yoshihiro Shimoda [Fri, 24 Oct 2014 10:45:06 +0000 (19:45 +0900)]
ARM: shmobile: r8a7791: add HS-USB device node
Define the R8A7791 generic part of the HS-USB device node. It is up to the board
file to enable the device.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
[Sergei: fixed summary, added changelog]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
1c1fee7cbba99023a11d4d2991b56c99a3174bd4)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Yoshihiro Shimoda [Fri, 24 Oct 2014 10:44:34 +0000 (19:44 +0900)]
ARM: shmobile: lager: enable HS-USB
Enable HS-USB device for the Lager board, defining the GPIO that the driver
should check when probing. Since this board doesn't have the OTG ID pin, we
assume that GP5_18 (USB0_PWEN) is an ID pin because it is 1 when the SW5 is
in position 2-3 (meaning USB function) and 0 in other positions.
Note that there will be pinctrl-related error messages if both internal PCI
and HS-USB drivers are enabled but they should be just ignored.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
[Sergei: added pin node and prop, moved device node, fixed summary, supplemented
changelog]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
e03074a7b5fdd2834a9fbbe77bc52a1ddb0d017f)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Yoshihiro Shimoda [Fri, 24 Oct 2014 10:44:33 +0000 (19:44 +0900)]
ARM: shmobile: r8a7790: add HS-USB device node
Define the R8A7790 generic part of the HS-USB device node.
It is up to the board file to enable the device.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
[Sergei: fixed summary, added changelog]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
ae0a555b68ae4feef07e919b22ef2e0b792616ee)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Yoshihiro Shimoda [Fri, 24 Oct 2014 10:43:02 +0000 (19:43 +0900)]
ARM: shmobile: r8a7791: add USB3.0 device node
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
c196931ece017a0aeeef4ee6d4fbb5adeb7dfd0a)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Yoshihiro Shimoda [Fri, 24 Oct 2014 10:41:47 +0000 (19:41 +0900)]
ARM: shmobile: lager: enable USB3.0
Since the PHY of USB3.0 and EHCI/OHCI ch2 are the same, the USB3.0
driver cannot use the phy driver when the EHCI/OHCI ch2 already used it:
phy phy-
e6590100.usb-phy.3: phy init failed --> -16
xhci-hcd: probe of
ee000000.usb failed with error -16
If so, we have to unbind the EHCI/OHCI ch2, and then we have to bind
the USB3.0 driver as the following:
echo 0000:02:02.0 > /sys/bus/pci/drivers/ehci-pci/unbind
echo 0000:02:01.0 > /sys/bus/pci/drivers/ohci-pci/unbind
echo
ee000000.usb > /sys/bus/platform/drivers/xhci-hcd/bind
Note that there will be pinctrl-related error messages if both
internal PCI and USB3.0 are enabled but they should be just ignored:
sh-pfc
e6060000.pfc: pin GP_5_22 already requested by
ee0d0000.pci; cannot claim for
ee000000.usb
sh-pfc
e6060000.pfc: pin-182 (
ee000000.usb) status -22
ata1: SATA link down (SStatus 0 SControl 300)
sh-pfc
e6060000.pfc: could not request pin 182 (GP_5_22) from group usb2 on device sh-pfc
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
37f7c1b0c1ed9465b2e2609ba57bba8a874ddd3c)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Yoshihiro Shimoda [Fri, 24 Oct 2014 10:41:46 +0000 (19:41 +0900)]
ARM: shmobile: r8a7790: add USB3.0 device node
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
157fcd8a3e6fb46ad99b615838afe16e8fcebd61)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Hisashi Nakamura [Fri, 12 Sep 2014 08:52:06 +0000 (10:52 +0200)]
ARM: shmobile: r8a7794: Add arch_timer to device tree
Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
da33648c4296a8590fbeafd7c1ae4494dfe8b04c)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 7 Jul 2014 07:54:31 +0000 (09:54 +0200)]
ARM: shmobile: bockw-reference: Initialise TMU device using DT
Initialise TMU device using DT when booting bockw
using DT-reference.
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
18b27aeb5591588de35628bf1e423abf24fe9695)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 7 Jul 2014 07:54:30 +0000 (09:54 +0200)]
ARM: shmobile: r8a7778: Add TMU nodes
This describes all of the TMU hardware of the r8a7778.
Each node is disabled and may be enabled as necessary
by board DTS files.
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
2109b5a28d27a593ab5afa7179fbef2f6a7cabcd)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Wed, 22 Oct 2014 09:38:29 +0000 (11:38 +0200)]
ARM: shmobile: armadillo800eva dts: Enable TMU0
ch0 will be used for clock events and for periodic clock events,
ch1 will be used as clock source.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
df211020718a7cbad0a8018c924ba7dd002f7282)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Wed, 22 Oct 2014 09:38:28 +0000 (11:38 +0200)]
ARM: shmobile: r8a7740 dtsi: Add TMU0 and TMU1 device nodes
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
600363334de89169a8dbbb1db874777d46fc239e)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Yoshifumi Hosoya [Tue, 14 Oct 2014 07:01:43 +0000 (16:01 +0900)]
ARM: shmobile: r8a7791: Add MMP clock to device tree
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
74d89d25f6b0d84f7cd2fc09dc708177787c1465)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Yoshifumi Hosoya [Tue, 14 Oct 2014 07:01:42 +0000 (16:01 +0900)]
ARM: shmobile: r8a7790: Add MMP clock to device tree
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
4ba8f2468ce346642b4ace3cdf4bdd8d29175011)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kouei Abe [Tue, 14 Oct 2014 07:01:41 +0000 (16:01 +0900)]
ARM: shmobile: r8a7791: Add SGX clock to device tree
Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
e4d2fd9eb43d12e9b6a7ab842bf6986b4dd75a1d)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kouei Abe [Tue, 14 Oct 2014 07:01:40 +0000 (16:01 +0900)]
ARM: shmobile: r8a7790: Add RGX clock to device tree
Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
2284ff5f3f7d58e33812f4387c2ac8a09428e4cf)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Thu, 2 Oct 2014 18:42:29 +0000 (20:42 +0200)]
ARM: shmobile: r8a7740 dtsi: Fix clock index for scifa2
The clocks property for the scifa2 device node referred to the scifa0
clock index instead of the scifa2 clock index.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
b345aee4d7c2387f2e36cdeb64e0f4dce34598f3)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Wolfram Sang [Tue, 16 Sep 2014 16:10:37 +0000 (18:10 +0200)]
ARM: shmobile: r8a7790: switch from scif to scifa
SCIF and SCIFA can be plexed onto the same wires on Lager board. The
datasheet also describes the wires as SCIFA. So, to make use of the
bigger FIFOs switch to SCIFA instead.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
7c05589413fa9902f2843e91845d6084f6f8e2cd)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Conflicts:
arch/arm/boot/dts/r8a7790-lager.dts
Sergei Shtylyov [Mon, 29 Sep 2014 18:23:11 +0000 (22:23 +0400)]
ARM: shmobile: r8a7791: link PCI USB devices to USB PHY
Describe the PCI USB devices that are behind the PCI bridges, adding necessary
links to the USB PHY device.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
e1bce1249d15b27c56790ab0ecea4a49dcd0e081)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Sergei Shtylyov [Mon, 29 Sep 2014 18:21:59 +0000 (22:21 +0400)]
ARM: shmobile: r8a7790: link PCI USB devices to USB PHY
Describe the PCI USB devices that are behind the PCI bridges, adding necessary
links to the USB PHY device.
Based on the original work by Ben Dooks <ben.dooks@codethink.co.uk>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
538c40e52df32285aa9440995c7345ea1c4d83b4)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Sergei Shtylyov [Fri, 26 Sep 2014 21:10:46 +0000 (01:10 +0400)]
ARM: shmobile: henninger: enable USB PHY
Enable USB PHY device for the Henninger board.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
fa03f6b243cb29698fe6a2687ac1d8fa9d4da2b8)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Sergei Shtylyov [Fri, 26 Sep 2014 21:09:22 +0000 (01:09 +0400)]
ARM: shmobile: koelsch: enable USB PHY
Enable USB PHY device for the Koelsch board.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
dc80d8bcac7c2eb0421b19cb7c2e297fbaf76da7)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Sergei Shtylyov [Fri, 26 Sep 2014 21:08:12 +0000 (01:08 +0400)]
ARM: shmobile: r8a7791: add USB PHY DT support
Define the R8A7791 generic part of the USB PHY device node. It is up to the
board file to enable the device.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
3b7e530d28db276b596251bbd435a058e27810f1)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Sergei Shtylyov [Fri, 26 Sep 2014 21:01:35 +0000 (01:01 +0400)]
ARM: shmobile: lager: enable USB PHY
Enable USB PHY device for the Lager board.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
6742cafb6fe84f00f096b206372b48f14eb56946)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Sergei Shtylyov [Fri, 26 Sep 2014 21:00:20 +0000 (01:00 +0400)]
ARM: shmobile: r8a7790: add USB PHY DT support
Define the R8A7790 generic part of the USB PHY device node. It is up to the
board file to enable the device.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
e089f6578ff96243e31ad6257d7c9f4c8a447107)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Fri, 12 Sep 2014 13:15:20 +0000 (15:15 +0200)]
ARM: shmobile: r8a7740 dtsi: Add missing INTCA clock for irqpin module
This clock drives the INTCA irqpin controller modules.
Before, it was assumed enabled by the bootloader or reset state.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: devicetree@vger.kernel.org
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
3ab84ee95ba4e28b30fd8ec7c38f5e9f72c4b4b7)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Sun, 26 Oct 2014 13:06:29 +0000 (15:06 +0200)]
ARM: shmobile: marzen-reference: Don't include legacy clock.h
The marzen-reference board file doesn't need the clock.h header, don't
include it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
803fc9b590f74ef1066be328f2f33c2b285ca3af)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Tue, 21 Jan 2014 15:02:54 +0000 (16:02 +0100)]
ARM: shmobile: koelsch: Enable DU device in DT
Specify the DU output topology, enable the DU device and configure the
related pins.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
0ee56d403549fd97d8acac6b7ba3a17f6999c30a)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Tue, 21 Jan 2014 15:01:31 +0000 (16:01 +0100)]
ARM: shmobile: koelsch-reference: Remove DU platform device
The DU device is now instantiated from the device tree, remove the
corresponding platform device.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
910343e7e281c3f6ac0c660061370afa306d24d0)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Tue, 21 Jan 2014 15:02:54 +0000 (16:02 +0100)]
ARM: shmobile: lager: Enable DU device in DT
Specify the DU output topology, enable the DU device and configure the
related pins.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
3edd18ffe53e3c13820310f51109c12e45874cfd)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Tue, 21 Jan 2014 15:01:31 +0000 (16:01 +0100)]
ARM: shmobile: lager-reference: Remove DU platform device
The DU device is now instantiated from the device tree, remove the
corresponding platform device.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
64d9c22154d77a448944733d1373c8c0af8e0de2)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 27 Aug 2014 09:11:45 +0000 (11:11 +0200)]
ARM: shmobile: marzen: Enable DU device in DT
Specify the DU output topology, enable the DU device and configure the
related pins.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
a7aee3ac437be568e6285c10d765ec074fa19587)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Thu, 23 Oct 2014 14:38:31 +0000 (17:38 +0300)]
ARM: shmobile: Select CONFIG_ZONE_DMA when CONFIG_ARM_LPAE is enabled
Most IP cores on ARM Renesas platforms can only address 32 bits of
physical memory for DMA. Without CONFIG_ZONE_DMA enabled and with the
recent CMA highmem allocation support, the default CMA zone is reserved
above the 4GiB limit when LPAE is enabled, resulting in various driver
failures.
Fix the problem by selecting CONFIG_ZONE_DMA. Other options to
investigate in the future would be to either enable IOMMU support or use
custom CMA reservations for peripherals not supporting LPAE.
While not a strict dependency, the "[PATCH 0/4] Low/high memory CMA
reservation fixes" series is also required to fix a different but related CMA
allocation problem.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
3794705aeb318c431c07072f04380c78cc5a84ac)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Thu, 23 Oct 2014 11:19:01 +0000 (13:19 +0200)]
ARM: shmobile: r8a7740: Add A3SM pm domain support
Add support for the A3SM power domain, and hook it up as a subdomain of
A4S.
This domain contains the System CPU (Cortex-A9) hardware block. Hence
move the special CPU handling from A4S to A3SM.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
dc4470e177973feedd82596969d86468a1695b1e)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Thu, 23 Oct 2014 11:19:00 +0000 (13:19 +0200)]
ARM: shmobile: r8a7740: Add A4SU pm domain support
Add support for the A4SU power domain.
This domain contains the USBPHY hardware block, which is currently not
used by any driver.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
4ee7830c3ef9224bd078abe41a33c7396f827078)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Thu, 23 Oct 2014 11:18:59 +0000 (13:18 +0200)]
ARM: shmobile: r8a7740/armadillo legacy: Add A4R pm domain support
Add support for the A4R power domain, and hook up the A3RV subdomain,
and the CEU0, TMU0, and IIC0 hardware blocks.
This domain also contains the Realtime CPU (SH-4A), Realtime CPU debug
modules, H-UDI, RT-SHwy, INTCS, RT-HPB, VIO6C, JPU, RTDMAC1/2, SSP,
MSIOF0, CMT0, ICB, DREQPAK (RT), 2DDMAC, IPMMUI, and 2DG hardware
blocks, but these are currently not used by any driver.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
1618a677046b0391621708734f56886233210047)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Thu, 23 Oct 2014 11:18:58 +0000 (13:18 +0200)]
ARM: shmobile: r8a7740: Add D4 pm domain support
Add support for the D4 power domain.
This domain contains the Coresight-ETM hardware block.
As long as the ARM debug/perf code doesn't use resource management with
runtime PM support, the D4 power domain must be kept powered to avoid a
crash during resume from s2ram (dbg_cpu_pm_notify() calls
reset_ctrl_regs() unconditionally, causing an undefined instruction
oops).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
7e81f5434db5bbef3ac55d3f44f702566c0323c6)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Thu, 23 Oct 2014 11:18:57 +0000 (13:18 +0200)]
ARM: shmobile: r8a7740/armadillo legacy: Add A4MP pm domain support
Add support for the A4MP power domain, and hook up the HDMI-Link and FSI
hardware blocks.
This domain also contains the SPU2, FMSI, and BBIF2 hardware blocks,
but these are currently not used by any driver.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
77192e1e25a57a519df30015b29c046bd6a769fc)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Thu, 23 Oct 2014 11:18:56 +0000 (13:18 +0200)]
ARM: shmobile: r8a7740: Add A3SG pm domain support
Add support for the A3SG power domain, and hook it up as a subdomain of
A4S.
This domain contains the SGX540 hardware block, which is currently not
used by any driver.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
92e88fd7793401dc7bc1b5cec93761e83b19b947)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Thu, 23 Oct 2014 11:18:55 +0000 (13:18 +0200)]
ARM: shmobile: r8a7740: Add A3RV pm domain support
Add support for the A3RV power domain.
This domain contains the VPU5F and VCP1 hardware blocks, which are
currently not used by any driver.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
995d925058b63f8300b20d458d941a8a1306d8fb)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Thu, 23 Oct 2014 11:18:54 +0000 (13:18 +0200)]
ARM: shmobile: armadillo800eva legacy: Add missing A4S pm domain devices
Commit
8459293c27bcd13a ("ARM: shmobile: r8a7740: add A4S pm domain
support") added the A4S power domain, but forgot to hook up the GbEther
hardware block.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
671c522a69fc6fa6960ada4c55bc7186f7d89a3a)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Thu, 23 Oct 2014 11:18:53 +0000 (13:18 +0200)]
ARM: shmobile: armadillo800eva legacy: Add missing A3SP pm domain devices
Commit
802a5639aa7041b2 ("ARM: shmobile: r8a7740: add A3SP pm domain
support") added the A3SP power domain, but forgot to hook up the TPU,
SDHI0/1, and MMCIF hardware blocks.
Note: As the default PM QoS latency constraint for SDHI is only 100 µs
(cfr. commit
c419e611c3c59c0e ("tmio_mmc / PM: Use PM QoS latency
constraint"), while DEFAULT_DEV_LATENCY_NS is 250000, suspend fails with
-EBUSY, unless the constraint is increased first to more than 500 µs
using e.g.
echo 501 > /sys/devices/platform/sh_mobile_sdhi.0/power/pm_qos_resume_latency_us
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
4311d9654c66b7cc7147035b8ec74f41ddffa650)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Thu, 23 Oct 2014 11:18:52 +0000 (13:18 +0200)]
ARM: shmobile: r8a7740: Add missing A4S pm domain devices
Commit
8459293c27bcd13a ("ARM: shmobile: r8a7740: add A4S pm domain
support") added the A4S power domain, but forgot to hook up the INTCA
hardware block.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
3b358cb8b7c73304ea2c634afc644cfad37adbdc)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Thu, 23 Oct 2014 11:18:51 +0000 (13:18 +0200)]
ARM: shmobile: r8a7740: Add missing A3SP pm domain devices
Commit
802a5639aa7041b2 ("ARM: shmobile: r8a7740: add A3SP pm domain
support") added the A3SP power domain, but forgot to hook up the IPPMU,
DMAC0/1/2, and USBDMAC hardware blocks.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
80f643b39346768878317eb04bd4b1deb4551537)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Tue, 21 Jan 2014 15:00:46 +0000 (16:00 +0100)]
ARM: shmobile: r8a7791: Add DU node to device tree
Add the DU device with a disabled state. Boards that want to enable the
DU need to specify the output topology
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
8eefac2d6620642e8c44bf4acbf442c7d89f39d8)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Tue, 21 Jan 2014 15:00:46 +0000 (16:00 +0100)]
ARM: shmobile: r8a7790: Add DU node to device tree
Add the DU device with a disabled state. Boards that want to enable the
DU need to specify the output topology.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[horms+renesas@verge.net.au: resolved minor conflict]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
3ac6a83c09cbb74ebb3d3e7e6e40e1ead3ff9d01)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Tue, 21 Jan 2014 15:00:46 +0000 (16:00 +0100)]
ARM: shmobile: r8a7779: Add DU node to device tree
Add the DU device with a disabled state. Boards that want to enable the
DU need to specify the output topology
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[horms+renesas@verge.net.au: resolved minor conflict]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
1f08bbe8ac737a728812df88cbb3049842df7b84)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Sun, 26 Oct 2014 14:20:27 +0000 (16:20 +0200)]
ARM: shmobile: Remove FSF address from copyright headers
The information is already included in the COPYING file in the kernel
sources root directory, we don't want to modify all source files when
the FSF will move to a new address, and I'm tired of seeing the related
checkpatch.pl warnings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
335204dfb83b3105cf4a666d1ad024917831cbdc)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Ulrich Hecht [Fri, 12 Sep 2014 08:52:05 +0000 (10:52 +0200)]
ARM: shmobile: rcar-gen2: Add CA7 arch_timer initialization for r8a7794
On E2, the arch timer is hooked up to a different clock, and the CA7's arch
timer CNTVOFF register must be initialized.
Based on work by Hisashi Nakamura.
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
9ce3fa6816c2fb59d128248c9b0509aef1c5dae7)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Fri, 17 Oct 2014 12:24:39 +0000 (14:24 +0200)]
ARM: shmobile: sh73a0: Remove wrapper sh73a0_init_delay()
sh73a0_init_delay() just calls shmobile_init_delay(), hence replace
calls to it by direct calls to shmobile_init_delay().
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
dac95365dc2683df55c4e221e2f669a056863307)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Fri, 17 Oct 2014 12:24:38 +0000 (14:24 +0200)]
ARM: shmobile: r8a7778: Remove wrapper r8a7778_init_delay()
r8a7778_init_delay() just calls shmobile_init_delay(), hence replace
calls to it by direct calls to shmobile_init_delay().
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
92ee341e0b87551ab8838116782a4f3929108136)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 7 Jul 2014 07:54:39 +0000 (09:54 +0200)]
ARM: shmobile: r8a73a4: Remove empty r8a73a4_add_dt_devices
r8a73a4_add_dt_devices() no longer enables any devices
so remove it.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
fd3edcbe9f7bf24b13cadca7616f8e10bbe7e2b3)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 7 Jul 2014 07:54:38 +0000 (09:54 +0200)]
ARM: shmobile: ape6evm-reference: Initialise CMT1 device using DT
Initialise CMT1 device using DT when booting ape6evm
using DT-reference.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
dfb846c95e3a7bb14f3aa61473aa4be0a8fe02ab)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 7 Jul 2014 07:54:37 +0000 (09:54 +0200)]
ARM: shmobile: r8a73a4: Rename cmt registration helper
Rename r8a7790_register_cmt() as r8a73a4_register_cmt() to
reflect name of the SoC in use. The use of r8a7790 appears
to be due to historical sharing of code from that SoC.
Shared code is no longer used.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
95e39682033b9940e17108098f08745b8938ab2c)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Conflicts:
arch/arm/mach-shmobile/setup-r8a73a4.c
Simon Horman [Mon, 7 Jul 2014 07:54:36 +0000 (09:54 +0200)]
ARM: shmobile: r8a73a4: Add CMT1 node
This describes all of the CMT1 hardware of the r8a73a4.
The node is disabled and may be enabled as necessary by board DTS files.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
f7b65230019b9dacd69922f925933c8bde1f9ec2)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Fri, 17 Oct 2014 12:22:37 +0000 (14:22 +0200)]
ARM: shmobile: sh7372: Add shmobile_init_late()
Extend sh7372 SoC machine vector to include shmobile_init_late()
so Suspend-to-RAM and CPUIdle are setup as expected.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
27c1bb20d45830a64bf344cc1cb5e0a745e2d206)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Sun, 5 Oct 2014 23:59:20 +0000 (08:59 +0900)]
ARM: shmobile: Handle CA7 arch timer delay
Update the delay code to include arch timer checks
for CA7. From a arch timer availability perspective
CA7 should be treated same as CA15.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
27f3c70874fc1d114e26c807e900fec4b50b1217)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 11 Aug 2014 02:38:59 +0000 (11:38 +0900)]
ARM: shmobile: armadillo800eva: Sort includes
Sorted includes seems to be the done thing these days.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
f4115f25c11790646351df243dae070a7cf80163)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Mon, 6 Oct 2014 11:59:13 +0000 (13:59 +0200)]
ARM: shmobile: kzm9d dts: Add chosen/stdout-path
Add a stdout-path property so that automatic console selection works
in the absence of a "console=" parameter on the kernel command line.
Note that we have to keep the "console=ttyS1,115200n81" parameter in
chosen/bootargs, else the console will use the default setting of 9600
baud.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
120f038cf04b95dc895cba503a7516ff75561438)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Fri, 3 Oct 2014 15:11:44 +0000 (17:11 +0200)]
ARM: shmobile: kzm9g-reference dts: Add chosen/stdout-path
Add a stdout-path property so that automatic console selection works
in the absence of a "console=" parameter on the kernel command line.
In addition, this will allow the PM domain code to find the PM domain
for the console device.
Note that we have to keep the "console=ttySC4" parameter in
chosen/bootargs, else we only get console messages on tty0.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
59ab5bff23020b6223857a460a39b9ec71d91cea)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Fri, 3 Oct 2014 15:11:43 +0000 (17:11 +0200)]
ARM: shmobile: alt dts: Add chosen/stdout-path
Add a stdout-path property so that automatic console selection works
in the absence of a "console=" parameter on the kernel command line.
Note that we have to keep the "console=ttySC0,38400" parameter in
chosen/bootargs, else the console will use the default setting of 115200
baud.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
b4a0f50cc70fef466e5b9935519b8213611e75bb)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Fri, 3 Oct 2014 15:11:42 +0000 (17:11 +0200)]
ARM: shmobile: koelsch dts: Add chosen/stdout-path
Add a stdout-path property so that automatic console selection works
in the absence of a "console=" parameter on the kernel command line.
Note that we have to keep the "console=" parameter in chosen/bootargs,
as this DTS is shared between legacy and multi-platform.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
17323b3615b54bd80ba7e9056c62266e7df24f27)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Fri, 3 Oct 2014 15:11:41 +0000 (17:11 +0200)]
ARM: shmobile: henninger dts: Add chosen/stdout-path
Add a stdout-path property so that automatic console selection works
in the absence of a "console=" parameter on the kernel command line.
Note that we have to keep the "console=ttySC0,38400" parameter in
chosen/bootargs, else the console will use the default setting of 115200
baud.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
8590e2d742c1687a733a90edc25ab0178d6a66fc)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Fri, 3 Oct 2014 15:11:40 +0000 (17:11 +0200)]
ARM: shmobile: lager dts: Add chosen/stdout-path
Add a stdout-path property so that automatic console selection works
in the absence of a "console=" parameter on the kernel command line.
Note that we have to keep the "console=" parameter in chosen/bootargs,
as this DTS is shared between legacy and multi-platform.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
cf8558160747694f6011fe26aad79d50f3a40554)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Fri, 3 Oct 2014 15:11:39 +0000 (17:11 +0200)]
ARM: shmobile: marzen dts: Add chosen/stdout-path
Add a stdout-path property so that automatic console selection works
in the absence of a "console=" parameter on the kernel command line.
Note that we have to keep the "console=" parameter in chosen/bootargs,
as this DTS is shared between legacy and multi-platform.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
1877a35096a3aebd6e848b688f8a50b75882b7e3)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Fri, 3 Oct 2014 15:11:38 +0000 (17:11 +0200)]
ARM: shmobile: bockw-reference dts: Add chosen/stdout-path
Add a stdout-path property so that automatic console selection works
in the absence of a "console=" parameter on the kernel command line.
Remove the now-superfluous "console=" parameter from chosen/bootargs.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
05988b32e3551ffd23e095b3e409db112bb84809)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>