Dave Gerlach [Tue, 11 May 2021 15:22:00 +0000 (10:22 -0500)]
ram: k3-j721e: lpddr4_address_slice_0_macros: Fix indentation issues
Fix the indentation for certain macros to be consistent with the other
macros in the file, as the existing indentation does not make sense in
many places.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Dave Gerlach [Tue, 11 May 2021 15:21:59 +0000 (10:21 -0500)]
dt-bindings: memory-controller: Add K3 AM64 DDRSS compatible
Update the k3-ddrss DT binding document to include compatible
for k3,am64-ddrss.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Dave Gerlach [Fri, 23 Apr 2021 16:27:48 +0000 (11:27 -0500)]
configs: am64x_evm_a53: Add Initial support
Add initial A53 defconfig support for AM64x SoCs.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Dave Gerlach [Fri, 23 Apr 2021 16:27:47 +0000 (11:27 -0500)]
configs: am64x_evm_r5: Add Initial support
Add initial R5 defconfig support for AM64x SoCs.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Dave Gerlach [Fri, 23 Apr 2021 16:27:46 +0000 (11:27 -0500)]
arm: dts: k3-am642: Add r5 specific dt support
Add initial support for dt that runs on r5.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Dave Gerlach [Fri, 23 Apr 2021 16:27:45 +0000 (11:27 -0500)]
arm: dts: k3-am642: Add initial support for EVM
The AM642 EValuation Module (EVM) is a board that provides access to
various peripherals available on the AM642 SoC, such as PCIe, USB 2.0,
CPSW Ethernet, ADC, and more.
Add basic support.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Dave Gerlach [Fri, 23 Apr 2021 16:27:44 +0000 (11:27 -0500)]
arm: dts: ti: Add Support for AM642 SoC
The AM642 SoC belongs to the K3 Multicore SoC architecture platform,
providing advanced system integration to enable applications such as
Motor Drives, PLC, Remote IO and IoT Gateways.
Some highlights of this SoC are:
* Dual Cortex-A53s in a single cluster, two clusters of dual Cortex-R5F
MCUs, and a single Cortex-M4F.
* Two Gigabit Industrial Communication Subsystems (ICSSG).
* Integrated Ethernet switch supporting up to a total of two external
ports.
* PCIe-GEN2x1L, USB3/USB2, 2xCAN-FD, eMMC and SD, UFS, OSPI memory
controller, QSPI, I2C, eCAP/eQEP, ePWM, ADC, among other
peripherals.
* Centralized System Controller for Security, Power, and Resource
Management (DMSC).
See AM64X Technical Reference Manual (SPRUIM2, Nov 2020)
for further details: https://www.ti.com/lit/pdf/spruim2
Introduce basic support for the AM642 SoC to enable SD/MMC boot.
Introduce a limited set of MAIN domain peripherals under cbass_main and
a set of MCU domain peripherals under cbass_mcu.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Dave Gerlach [Fri, 23 Apr 2021 16:27:43 +0000 (11:27 -0500)]
dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM64
Add pinctrl macros for AM64 SoC. These macro definitions are similar to
that of previous platforms, but adding new definitions to avoid any
naming confusions in the soc dts files.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Dave Gerlach [Fri, 23 Apr 2021 16:27:42 +0000 (11:27 -0500)]
board: ti: am64x: Add board support for am64x evm
Add board specific initialization for am64x based boards.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Dave Gerlach [Fri, 23 Apr 2021 16:27:41 +0000 (11:27 -0500)]
mailbox: k3-sec-proxy: Extend valid thread IDs
AM64x uses a different thread mapping that existing K3 SoCs, so update
the valid thread ID list to include those used for AM64x.
Also remove the comment identifying the purpose of each thread ID. The
purpose of the thread ID is specified when describing the threads in the
device tree and the same ID can mean different things on different SoCs,
so the comment is not useful.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Dave Gerlach [Fri, 23 Apr 2021 16:27:40 +0000 (11:27 -0500)]
mmc: sdhci_am654: Add Support for TI's AM642 SoC
Add support for the controller present on the AM642 SoC.
There are instances:
sdhci0: 8bit bus width, max 400 MBps
sdhci1: 4bit bus width, max 100 MBps
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Keerthy [Fri, 23 Apr 2021 16:27:39 +0000 (11:27 -0500)]
armv8: mach-k3: am642: Add custom MMU support
Change the memory attributes for the DDR regions used by the remote
processors on AM65x so that the cores can see and execute the proper code.
A separate table based on the previous K3 SoCs is introduced since the
number of remote processors and their DDR usage is different between the
SoC families.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Suman Anna [Fri, 23 Apr 2021 16:27:38 +0000 (11:27 -0500)]
arm: mach-k3: am642: Shut down R5 core after ATF startup on A53
The AM642 SoCs use the Main R5FSS0 as a boot processor, and runs
the R5 SPL that performs the initialization of the System Controller
processor and starting the Arm Trusted Firmware (ATF) on the Arm
Cortex A53 cluster. The Core0 serves as this boot processor and is
parked in WFE after all the initialization. Core1 does not directly
participate in the boot flow, and is simply parked in a WFI.
Power down these R5 cores (and the associated RTI timer resources
that were indirectly powered up) after starting up ATF on A53 by
using the appropriate SYSFW API in release_resources_for_core_shutdown().
This allows these Main R5F cores to be further controlled from the
A53 to run regular applications.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Dave Gerlach [Fri, 23 Apr 2021 16:27:37 +0000 (11:27 -0500)]
arm: mach-k3: am642: Use mmc start and stop callbacks
To avoid any glitches on MMC clock line, make use of pm per and post
callbacks when loading sysfw.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Dave Gerlach [Fri, 23 Apr 2021 16:27:36 +0000 (11:27 -0500)]
arm: mach-k3: am642: Load SYSFW binary and config from boot media
Use the System Firmware (SYSFW) loader framework to load and start
the SYSFW as part of the AM642 early initialization sequence. Also
make use of existing logic to detect if ROM has already loaded sysfw
and avoided attempting to reload and instead just prepare to use already
running firmware.
While at it also initialize the MAIN_UART1 pinmux as it is used by SYSFW
to print diagnostic messages.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Dave Gerlach [Fri, 23 Apr 2021 16:27:35 +0000 (11:27 -0500)]
arm: mach-k3: am642: Store boot info from ROM
For AM642, ROM supports loading system firmware directly
from boot image. ROM passes information about the number of
images that are loaded to bootloader at a specific address
that is temporary. Add support for storing this information
somewhere permanent before it gets corrupted.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Dave Gerlach [Fri, 23 Apr 2021 16:27:34 +0000 (11:27 -0500)]
arm: mach-k3: am642: Unlock all applicable control MMR registers
To access various control MMR functionality the registers need to
be unlocked. Do that for all control MMR regions in the MAIN domain.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Keerthy [Fri, 23 Apr 2021 16:27:33 +0000 (11:27 -0500)]
arm: mach-k3: am642: Add support for boot device detection
AM642 allows for booting from primary or backup boot media.
Both media can be chosen individually based on switch settings.
ROM looks for a valid image in primary boot media, if not found
then looks in backup boot media. In order to pass this boot media
information to boot loader, ROM stores a value at a particular
address. Add support for reading this information and determining
the boot media correctly.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Dave Gerlach [Fri, 23 Apr 2021 16:27:32 +0000 (11:27 -0500)]
arm: mach-k3: Add basic support for AM642 SoC definition
The AM642 SoC belongs to the K3 Multicore SoC architecture platform,
providing advanced system integration to enable applications such as
Motor Drives, PLC, Remote IO and IoT Gateways.
Some highlights of this SoC are:
* Dual Cortex-A53s in a single cluster, two clusters of dual Cortex-R5F
MCUs, and a single Cortex-M4F.
* Two Gigabit Industrial Communication Subsystems (ICSSG).
* Integrated Ethernet switch supporting up to a total of two external
ports.
* PCIe-GEN2x1L, USB3/USB2, 2xCAN-FD, eMMC and SD, UFS, OSPI memory
controller, QSPI, I2C, eCAP/eQEP, ePWM, ADC, among other
peripherals.
* Centralized System Controller for Security, Power, and Resource
Management (DMSC).
See AM64X Technical Reference Manual (SPRUIM2, Nov 2020)
for further details: https://www.ti.com/lit/pdf/spruim2
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Dario Binacchi [Sat, 1 May 2021 15:05:26 +0000 (17:05 +0200)]
Revert "fdt: translate address if #size-cells = <0>"
This reverts commit
d64b9cdcd475eb7f07b49741ded87e24dae4a5fc.
As pointed by [1] and [2], the reverted patch made every DT 'reg'
property translatable. What the patch was trying to fix was fixed in a
different way from previously submitted patches which instead of
correcting the generic address translation function fixed the issue with
appropriate platform code.
[1] https://patchwork.ozlabs.org/project/uboot/patch/
1614324949-61314-1-git-send-email-bmeng.cn@gmail.com/
[2] https://lore.kernel.org/linux-clk/
20210402192054.7934-1-dariobin@libero.it/T/
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Dario Binacchi [Sat, 1 May 2021 15:05:25 +0000 (17:05 +0200)]
clk: ti: am3-dpll: use custom API for memory access
Using the custom TI functions required not only replacing common memory
access functions but also rewriting the routines used to set bypass and
lock states. As for readl() and writel(), they also required the address
of the register to be accessed, a parameter that is hidden by the TI clk
module.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Dario Binacchi [Sat, 1 May 2021 15:05:24 +0000 (17:05 +0200)]
clk: ti: gate: use custom API for memory access
Replaces the common memory access functions used by the driver with the
ones exported from the TI clk module.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Dario Binacchi [Sat, 1 May 2021 15:05:23 +0000 (17:05 +0200)]
clk: ti: change clk_ti_latch() signature
The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Dario Binacchi [Sat, 1 May 2021 15:05:22 +0000 (17:05 +0200)]
clk: ti: add custom API for memory access
As pointed by [1] and [2], commit
d64b9cdcd4 ("fdt: translate address if #size-cells = <0>") is wrong:
- It makes every 'reg' DT property translatable. It changes the address
translation so that for an I2C 'reg' address you'll get back as reg
the I2C controller address + reg value.
- The quirk must be fixed with platform code.
The clk_ti_get_reg_addr() is the platform code able to make the correct
address translation for the AM33xx clocks registers. Its implementation
was inspired by the Linux Kernel code.
[1] https://patchwork.ozlabs.org/project/uboot/patch/
1614324949-61314-1-git-send-email-bmeng.cn@gmail.com/
[2] https://lore.kernel.org/linux-clk/
20210402192054.7934-1-dariobin@libero.it/T/
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Tom Rini [Mon, 10 May 2021 21:03:22 +0000 (17:03 -0400)]
Prepare v2021.07-rc2
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Mon, 10 May 2021 12:02:00 +0000 (08:02 -0400)]
Merge https://source.denx.de/u-boot/custodians/u-boot-x86
- x86: correct regwidth prompt in cbsysinfo
- virtio: convert README.virtio to reST
Bin Meng [Thu, 29 Apr 2021 09:40:08 +0000 (17:40 +0800)]
MAINTAINERS: Add an entry for VirtIO
This was missed when VirtIO support was initially brought to U-Boot
back in 2018. Add an entry for it and list myself as the maintainer.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Bin Meng [Thu, 29 Apr 2021 09:40:07 +0000 (17:40 +0800)]
doc: develop: Convert README.virtio to reST
This converts the existing README.virtio to reST, and puts it under
the develop/driver-model/ directory.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Fri, 23 Apr 2021 22:04:57 +0000 (10:04 +1200)]
x86: Correct regwidth prompt in cbsysinfo
This should be 'regwidth', not 'baud'. Fix it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tom Rini [Fri, 7 May 2021 12:57:32 +0000 (08:57 -0400)]
Merge https://source.denx.de/u-boot/custodians/u-boot-riscv
Tom Rini [Thu, 6 May 2021 15:00:07 +0000 (11:00 -0400)]
Merge branch '2021-05-06-misc-updates'
- Allow for boards to update bootargs before booting the OS (helpful in
some forms of secure boot).
- Enhance GPT write support.
- gpio-sysinfo updates
- Allow env to be appended from dtb
Heinrich Schuchardt [Fri, 9 Apr 2021 10:48:14 +0000 (10:48 +0000)]
cmd/exception: support ebreak exception on RISC-V
The ebreak instruction should generate a breakpoint exception.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Rick Chen <rick@andestech.com>
Dylan Jhong [Thu, 1 Apr 2021 08:48:51 +0000 (16:48 +0800)]
atcspi200: Add timeout mechanism in spi_xfer()
Adding timeout mechanism to avoid spi driver from stucking
in the while loop in __atcspi200_spi_xfer().
Signed-off-by: Dylan Jhong <dylan@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Rick Chen <rick@andestech.com>
Green Wan [Mon, 3 May 2021 06:23:05 +0000 (23:23 -0700)]
riscv: cpu: fu740: clear feature disable CSR
Clear feature disable CSR to turn on all features of hart. The detail
is specified at section, 'SiFive Feature Disable CSR', in user manual
https://sifive.cdn.prismic.io/sifive/
aee0dd4c-d156-496e-a6c4-db0cf54bbe68_sifive_U74MC_rtl_full_20G1.03.00_manual.pdf
Signed-off-by: Green Wan <green.wan@sifive.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Rick Chen <rick@andestech.com>
Green Wan [Mon, 3 May 2021 06:23:04 +0000 (23:23 -0700)]
riscv: cpu: Add callback to init each core
Add a callback harts_early_init() to start.S to allow different riscv
hart perform setup code for each hart as early as possible. Since all
the harts enter the callback, they must be able to run the same
setup.
Signed-off-by: Green Wan <green.wan@sifive.com>
Reviewed-by: Rick Chen <rick@andestech.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Niko Mauno [Mon, 22 Feb 2021 19:18:51 +0000 (19:18 +0000)]
fdt_support.c: Allow late kernel cmdline modification
By declaring board-specific board_fdt_chosen_bootargs() the kernel
command line arguments can be adjusted before injecting to flat dt
chosen node.
Signed-off-by: Niko Mauno <niko.mauno@vaisala.com>
Farhan Ali [Fri, 26 Feb 2021 18:17:33 +0000 (10:17 -0800)]
cmd: gpt: Add option to write GPT partitions to environment variable
This change would enhance the existing 'gpt read' command to allow
(optionally) writing of the read GPT partitions to an environment
variable in the UBOOT partitions layout format. This would allow users
to easily change the overall partition settings by editing said variable
and then using the variable in the 'gpt write' and 'gpt verify' commands.
Signed-off-by: Farhan Ali <farhan.ali@broadcom.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Corneliu Doban <cdoban@broadcom.com>
Cc: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
Rasmus Villemoes [Wed, 21 Apr 2021 09:06:55 +0000 (11:06 +0200)]
sandbox: add test of CONFIG_ENV_IMPORT_FDT
Check that a variable defined in /config/environment is found in the
run-time environment, and that clearing fdt_env_path from within that
node works.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
[trini: Conditionalize the test being linked in]
Signed-off-by: Tom Rini <trini@konsulko.com>
Rasmus Villemoes [Wed, 21 Apr 2021 09:06:54 +0000 (11:06 +0200)]
env: allow environment to be amended from control dtb
It can be useful to use the same U-Boot binary for multiple purposes,
say the normal one, one for developers that allow breaking into the
U-Boot shell, and one for use during bootstrapping which runs a
special-purpose bootcmd. Or one can have several board variants that
can share almost all boot logic, but just needs a few tweaks in the
variables used by the boot script.
To that end, allow the control dtb to contain a /config/enviroment
node (or whatever one puts in fdt_env_path variable), whose
property/value pairs are used to update the run-time environment after
it has been loaded from its persistent location.
The indirection via fdt_env_path is for maximum flexibility - for
example, should the user wish (or board logic dictate) that the values
in the DTB should no longer be applied, one simply needs to delete the
fdt_env_path variable; that can even be done automatically by
including a
fdt_env_path = "";
property in the DTB node.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Sean Anderson [Tue, 20 Apr 2021 14:50:58 +0000 (10:50 -0400)]
test: Add gpio-sysinfo test
This adds a test for the gpio-sysinfo driver.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Sean Anderson [Tue, 20 Apr 2021 14:50:57 +0000 (10:50 -0400)]
sysinfo: Add gpio-sysinfo driver
This uses the newly-added dm_gpio_get_values_as_int_base3 function to
implement a sysinfo device. The revision map is stored in the device tree.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Sean Anderson [Tue, 20 Apr 2021 14:50:56 +0000 (10:50 -0400)]
sysinfo: Require that sysinfo_detect be called before other methods
This has the uclass enforce calling detect() before other methods. This
allows drivers to cache information in detect() and perform (cheaper)
retrieval in the other accessors. This also modifies the only instance
where this sequencing was not followed.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Sean Anderson [Tue, 20 Apr 2021 14:50:55 +0000 (10:50 -0400)]
sysinfo: Use global sysinfo IDs for existing sysinfo drivers
Since
07c9e683a4 ("smbios: Allow a few values to come from sysinfo")
there are common global sysinfo IDs. This patch moved existing IDs above
SYSINFO_ID_USER.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Sean Anderson [Tue, 20 Apr 2021 14:50:54 +0000 (10:50 -0400)]
dm: gpio: Fix gpio_get_list_count failing with livetree
of_parse_phandle_with_args (called by dev_read_phandle_with_args) does not
support getting the length of a phandle list by using the index -1.
Instead, use dev_count_phandle_with_args which supports exactly this
use-case.
Fixes:
8558217153 ("gpio: Convert to use APIs which support live DT")
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Fri, 30 Apr 2021 01:03:38 +0000 (21:03 -0400)]
Merge tag 'dm-pull-29apr21' of https://source.denx.de/u-boot/custodians/u-boot-dm
buildman environment fix
binman FMAP improvements
minor test improvements and fixes
minor dm improvements
Tom Rini [Thu, 29 Apr 2021 15:31:06 +0000 (11:31 -0400)]
Merge tag 'xilinx-for-v2021.07-rc2' of https://source.denx.de/u-boot/custodians/u-boot-microblaze
Xilinx changes for v2021.07-rc2
xilinx:
- Enable saving variables based on bootmode
- Cleanup usb dfu setup and wire it up with usb bootmode
- Fix bootscript address logic
- Remove GD references (spi, Versal)
- Enable capsule update
clk:
- Small Kconfig fix
net:
- Fix gmii2rgmii bridge binding
usb:
- Propagate error (dfu gadget)
Michal Simek [Mon, 26 Apr 2021 06:26:33 +0000 (08:26 +0200)]
spi: zynqmp: Remove gd reference
gd is not used in this file that's why doesn't make sense to declare it.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Tom Rini [Thu, 29 Apr 2021 12:22:17 +0000 (08:22 -0400)]
Merge https://source.denx.de/u-boot/custodians/u-boot-cfi-flash
- mtd: cfi: Fix PPB lock status readout (Marek)
Tom Rini [Thu, 29 Apr 2021 12:21:55 +0000 (08:21 -0400)]
Merge https://source.denx.de/u-boot/custodians/u-boot-marvell
- Add base support for Marvell OcteonTX2 CN9130 CRB (mostly done
by Kostya)
- Sync Armada 3k/7k/8k SERDES code with Marvell version (misc Marvell
authors)
- pci-aardvark: Fix processing PIO transfers (Pali)
Heinrich Schuchardt [Wed, 21 Apr 2021 10:24:29 +0000 (12:24 +0200)]
tpm: missing event types
Add a reference for the TPM event types and provide missing constants.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Chen Guanqiao [Mon, 12 Apr 2021 06:51:12 +0000 (14:51 +0800)]
test: dm: add test item for ofnode_get_addr() and ofnode_get_size()
Add test item for getting address and size functions
Test the following function:
- ofnode_get_addr()
- ofnode_get_size()
Signed-off-by: Chen Guanqiao <chenguanqiao@kuaishou.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Chen Guanqiao [Mon, 12 Apr 2021 06:51:11 +0000 (14:51 +0800)]
dm: core: Add size operations on device tree references
Add functions to add size of addresses in the device tree using ofnode
references.
If the size is not set, return FDT_SIZE_T_NONE.
Signed-off-by: Chen Guanqiao <chenguanqiao@kuaishou.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sun, 11 Apr 2021 04:27:28 +0000 (16:27 +1200)]
buildman: Use bytes for the environment
At present we sometimes see problems in gitlab where the environment has
0x80 characters or sequences which are not valid UTF-8.
Avoid this by using bytes for the environment, both internal to buildman
and when writing out the 'env' file. Add a test to make sure this works
as expected.
Reported-by: Marek Vasut <marex@denx.de>
Fixes:
e5fc79ea718 ("buildman: Write the environment out to an 'env' file")
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sun, 11 Apr 2021 04:27:27 +0000 (16:27 +1200)]
buildman: Handle exceptions in threads gracefully
There have been at least a few cases where an exception has occurred in a
thread and resulted in buildman hanging: running out of disk space and
getting a unicode error.
Handle these by collecting a list of exceptions, printing them out and
reporting failure if any are found. Add a test for this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sun, 11 Apr 2021 04:27:26 +0000 (16:27 +1200)]
buildman: Use common code to send an result
At present the code to report a build result is duplicated. Put it in a
common function to avoid this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sun, 11 Apr 2021 04:27:25 +0000 (16:27 +1200)]
buildman: Tidy up a few comments
Add some function comments which are missing, or missing arguments.
Signed-off-by: Simon Glass <sjg@chromium.org>
Sean Anderson [Thu, 8 Apr 2021 21:15:00 +0000 (17:15 -0400)]
dm: core: Fix uninitialized return value from dm_scan_fdt_node
If there are no nodes or if all nodes are disabled, this function would
return err without setting it first. Fix this by initializing err to
zero.
Fixes:
94f7afdf7e ("dm: core: Ignore disabled devices when binding")
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Patrick Delaunay [Tue, 6 Apr 2021 07:38:06 +0000 (09:38 +0200)]
dm: core: Add address translation in fdt_get_resource
Today of_address_to_resource() is called only in
ofnode_read_resource() for livetree support and
fdt_get_resource() is called when livetree is not supported.
The fdt_get_resource() doesn't do the address translation
so when it is required, but the address translation is done
by ofnode_read_resource() caller, for example in
drivers/firmware/scmi/smt.c::scmi_dt_get_smt_buffer() {
...
ret = ofnode_read_resource(args.node, 0, &resource);
if (ret)
return ret;
faddr = cpu_to_fdt32(resource.start);
paddr = ofnode_translate_address(args.node, &faddr);
...
The both behavior should be aligned and the address translation
must be called in fdt_get_resource() and removed for each caller.
Fixes:
a44810123f9e ("dm: core: Add dev_read_resource() to read device resources")
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Simon Glass [Fri, 2 Apr 2021 22:05:10 +0000 (11:05 +1300)]
binman: Support adding sections to FMAPs
When used with hierarchical images, use the Chromium OS convention of
adding a section before all the subentries it contains.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 2 Apr 2021 22:05:09 +0000 (11:05 +1300)]
binman: Tweak implementation of fmap
Use an interator in two of the fmap tests so it is easier to add new
items. Also check the name first since that is the first indication
that something is wrong. Use a variable for the expected size of the
fmap to avoid repeating the code.
Signed-off-by: Simon Glass <sjg@chromium.org>
Evan Benn [Thu, 1 Apr 2021 02:49:30 +0000 (13:49 +1100)]
patman: Parse checkpatch by message instead of by line
Parse each empty-line-delimited message separately. This saves having to
deal with all the different line content styles, we only care about the
header ERROR | WARNING | NOTE...
Also make checkpatch print line information for a uboot specific
warning.
Signed-off-by: Evan Benn <evanbenn@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Fri, 26 Feb 2021 12:52:31 +0000 (07:52 -0500)]
patman: Assume we always have pygit2 for tests
Given that we have tests that require pygit2 and it can be installed
like any other python module, fail much more loudly if it is missing.
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Fri, 26 Feb 2021 12:52:30 +0000 (07:52 -0500)]
tests: patman: Add requests to the module list
The patman tests require the requests module, add it.
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Fri, 26 Feb 2021 12:52:29 +0000 (07:52 -0500)]
Azure/GitLab: Ensure we use requirements.txt for testsuites
Given that test/py/requirements.txt has all required test modules, make
use of that rather than a manual pip install list before running our
assorted tool testsuites.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Andy Shevchenko [Thu, 11 Feb 2021 14:40:11 +0000 (16:40 +0200)]
test: Use positive conditional in test_matches()
It is easier to read the positive conditional.
While at it, convert hard coded length of "_test_" to strlen("_test_")
which will be converted to a constant bu optimizing compiler.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Andy Shevchenko [Thu, 11 Feb 2021 14:40:10 +0000 (16:40 +0200)]
test: Allow simple glob pattern in the test name
When run `ut dm [test name]` allow to use simple pattern to run all tests
started with given prefix. For example, to run all ACPI test cases:
ut dm acpi*
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 26 Apr 2021 20:19:48 +0000 (08:19 +1200)]
dtoc: Correct dtoc output when testing
At present each invocation of run_steps() updates OUTPUT_FILES_COMMON,
since it does not make a copy of the dict. This is fine for a single
invocation, but for tests, run_steps() is invoked many times.
As a result it may include unwanted items from the previous run, if it
happens that a test runs twice on the same CPU. The problem has not been
noticied previously, as there are few enough tests and enough CPUs that
is is rare for the 'wrong' combination of tests to run together.
Fix this by making a copy of the dict, before updating it. Update the
tests to suit, taking account of the files that are no-longer generated.
With this fix, we no-longer generate files which are not needed for a
particular state of OF_PLATDATA_INST, so the check_instantiate() function
is not needed anymore. It has become dead code and so fails the
code-coverage test (dtoc -T). Remove it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 24 Apr 2021 20:39:32 +0000 (08:39 +1200)]
binman: Correct testSplNoDtb() and Tpl also
These two tests require an ELF image so that symbol information can be
written into the SPL/TPL binary. At present they rely on other tests
having set it up first, but every test must run independently. This can
cause occasional errors in CI.
Fix this by setting up the required files, as other tests do.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Michal Simek [Mon, 26 Apr 2021 12:26:48 +0000 (14:26 +0200)]
net: phy: xilinx: Break while loop over ethernet phy
The commit
6c993815bbea ("net: phy: xilinx: Be compatible with live OF
tree") change driver behavior to while loop which wasn't correct because
the driver was looping over again and again. The reason was that
ofnode_valid() is taking 0 as correct value.
Fix it by changing while loop to ofnode_for_each_subnode() which is only
loop over available nodes.
Fixes:
6c993815bbea ("net: phy: xilinx: Be compatible with live OF tree")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Pali Rohár [Thu, 22 Apr 2021 14:23:04 +0000 (16:23 +0200)]
arm: a37xx: pci: Fix processing PIO transfers
Trying to clear PIO_START register when it is non-zero (which indicates
that previous PIO transfer has not finished yet) causes an External
Abort with SError 0xbf000002.
This bug is currently worked around in TF-A by handling External Aborts
in EL3 and ignoring this particular SError.
This workaround was also discussed at:
https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/commit/?id=
3c7dcdac5c50
https://lore.kernel.org/linux-pci/
20190316161243.29517-1-repk@triplefau.lt/
https://lore.kernel.org/linux-pci/
971be151d24312cc533989a64bd454b4@www.loen.fr/
https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/1541
Implement a proper fix to prevent this External Abort. As it is not
possible to cancel a pending PIO transfer, simply do not start a new one
if previous has not finished yet. In this case return an error to the
caller.
In most cases this SError happens when there is no PCIe card connected
or when PCIe link is down. The reason is that in these cases a PIO
transfer takes about 1.44 seconds. For this reason we also increase the
wait timeout in pcie_advk_wait_pio() to 1.5 seconds.
If PIO read transfer for PCI_VENDOR_ID register times out, or if it
isn't possible to read it yet because previous transfer is not finished,
return Completion Retry Status value instead of failing, to give the
caller a chance to send a new read request.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Igal Liberman [Wed, 26 Apr 2017 15:05:29 +0000 (18:05 +0300)]
doc: dt-bindings: add Marvell comphy binding
Change-Id: I29094afb646744afe78ad09bb7479894d1a65e96
Signed-off-by: Igal Liberman <igall@marvell.com>
Grzegorz Jaszczyk [Thu, 14 Mar 2019 12:00:53 +0000 (13:00 +0100)]
phy: marvell: utmi: update utmi config which fixes usb2.0 instability
- Add additional step which enables the Impedance and PLL calibration.
- Enable old squelch detector instead of the new analog squelch detector
circuit and update host disconnect threshold value.
- Update LS TX driver strength coarse and fine adjustment values.
Change-Id: Ifa0a585bfb5ecab0bfa033eed6874ff98b16a7df
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Igal Liberman [Mon, 14 May 2018 08:20:54 +0000 (11:20 +0300)]
phy: marvell: add support for SFI1
In CP115, comphy4 can be configured into SFI port1
(in addition to SFI0). This patch adds the option
described above.
In addition, rename all existing SFI/XFI references:
COMPHY_TYPE_SFI --> COMPHY_TYPE_SFI0
No functional change for exsiting configuration.
Change-Id: If9176222e0080424ba67347fe4d320215b1ba0c0
Signed-off-by: Igal Liberman <igall@marvell.com>
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Grzegorz Jaszczyk [Wed, 27 Feb 2019 14:35:58 +0000 (15:35 +0100)]
phy: marvell: fix pll initialization for second utmi port
According to Design Reference Specification the PHY PLL and Calibration
register from PHY0 are shared for multi-port PHY. PLL control registers
inside other PHY channels are not used.
This commit reworks utmi device tree nodes in a way that common PHY PLL
registers are moved to main utmi node. Accordingly both child nodes
utmi-unit range is reduced and register offsets in utmi_phy.h are updated
to this change.
This fixes issues in scenarios when only utmi port1 was in use, which
resulted with lack of correct pll initialization.
Change-Id: Icc520dfa719f43a09493ab31f671efbe88872097
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Grzegorz Jaszczyk [Fri, 1 Feb 2019 11:08:07 +0000 (12:08 +0100)]
phy: marvell: allow to initialize up to 6 USB ports
New products can contain up to 6 usb ports, therefore allow to initialize
all relevant UTMI PHYs.
Change-Id: I28c36e59fa0e3e338bb3ee0cee2240b923f39785
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-by: Kostya Porotchkin <Kostya.Porotchkin@cavium.com>
Igal Liberman [Mon, 19 Nov 2018 07:58:32 +0000 (09:58 +0200)]
phy: marvell: cp110: mark u-boot power-off calls
It helps ATF to determine who called power off
function (U-boot/Linux) and act accordingly
Change-Id: Icfc5cbfdba64754496812154272b28c0ff639f0f
Signed-off-by: Igal Liberman <igall@marvell.com>
Reviewed-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Christine Gharzuzi [Wed, 23 May 2018 09:10:36 +0000 (12:10 +0300)]
phy: marvell: fix handling of unconnected comphy
- the default value of comphy pipe selector is set to PCIe (x4)
in case of unconnected comphy the default value remains 0x4
which may lead to several issues with comphy initialization.
- this patch adds SMC call that powers off the comphy lane in case of
unconnected comphy.
Change-Id: I196b2916518dd8df3b159ffa85e2989b8e483087
Signed-off-by: Christine Gharzuzi <chrisg@marvell.com>
Signed-off-by: Igal Liberman <igall@marvell.com>
Reviewed-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Igal Liberman [Wed, 9 May 2018 15:50:29 +0000 (18:50 +0300)]
phy: marvell: pass sgmii id to firmware
Currently, we don't pass id for SGMII 0/1.
A bug in comphy selector configuration was found (in comphy
firmware), after fixing it, SGMII0/1 have different configuration,
so we need to pass the ID the firmware.
Change-Id: Idcff4029cc9cf018278e493221b64b33574e0d38
Signed-off-by: Igal Liberman <igall@marvell.com>
Reviewed-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Grzegorz Jaszczyk [Wed, 4 Apr 2018 14:42:43 +0000 (16:42 +0200)]
phy: marvell: cp110: clean up driver after it was moved to atf
Change-Id: I358792a96c13b54e700c05227cc7a8f6bd584694
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-by: Igal Liberman <igall@marvell.com>
Grzegorz Jaszczyk [Wed, 4 Apr 2018 14:26:36 +0000 (16:26 +0200)]
phy: marvell: cp110: remove both phy and pipe selector configuration
Now the comphy configuration is handled in atf, therefore there is no
need to configure phy or pipe selector in u-boot, it is configured by
atf for each particular pair: lane and mode.
Change-Id: I0bebf8d5ff66dbeb6bf9ef90876195938a8eb705
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-by: Igal Liberman <igall@marvell.com>
Grzegorz Jaszczyk [Tue, 3 Apr 2018 14:59:12 +0000 (16:59 +0200)]
phy: marvell: cp110: let the firmware perform training for XFI
Replace the XFI training with appropriate SMC call, so the firmware will
perform exact initialization.
Update Stefan 2021-03-23:
Move comphy_smc() function to an earlier place - necessary for the
mainline merge.
Change-Id: I789b130b05529dc80dadcf66aef407d93595b762
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Igal Liberman <igall@marvell.com>
Grzegorz Jaszczyk [Thu, 29 Mar 2018 10:30:20 +0000 (12:30 +0200)]
phy: marvell: cp110: let the firmware configure comphy for USB
Replace the comphy initialization for USB with appropriate SMC call,
so the firmware will execute required serdes configuration.
Change-Id: I7f773c0dfac70db9dd2653de2cdcfac577e78c4e
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Grzegorz Jaszczyk [Tue, 27 Mar 2018 10:52:24 +0000 (12:52 +0200)]
phy: marvell: cp110: let the firmware configure comphy for RXAUI
Replace the comphy initialization for RXAUI with appropriate SMC call,
so the firmware will execute required serdes configuration.
Change-Id: Iedae0285fb283e05bb263a8b4ce46e8e7451a309
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-by: Igal Liberman <igall@marvell.com>
Marcin Wojtas [Tue, 15 Oct 2019 10:30:39 +0000 (12:30 +0200)]
phy: marvell: cp110: remove unused definitions
Even if comphy types of SATA2/SATA3/SGMII3 and comphy speeds of
1.5G/3G/6.25G were referenced in the driver non configuration (dts)
was using it.
This patch removes unused definitions.
Change-Id: I53ed6f9d3a82b9d18cb4e488bc14d3cf687f9488
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Igal Liberman [Sun, 3 Dec 2017 13:13:08 +0000 (15:13 +0200)]
phy: marvell: enable comphy info prints for all devices
Change-Id: I3b97253e7102a0868440a9e0200acc1c7919c743
Signed-off-by: Igal Liberman <igall@marvell.com>
Igal Liberman [Tue, 23 Mar 2021 10:57:57 +0000 (11:57 +0100)]
phy: marvell: add RX training command
This patch adds support for running RX training using new command called
"rx_training"
Usage:
rx_training - rx_training <cp id> <comphy id>
RX training allows to improve link quality (for SFI mode)
by running training sequence between us and the link partner,
this allows to reach better link quality then using static configuration.
Change-Id: I818fe67ccaf19a87af50d4c34a9db7d6802049a5
Signed-off-by: Igal Liberman <igall@marvell.com>
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Igal Liberman [Mon, 21 Aug 2017 13:58:21 +0000 (16:58 +0300)]
phy: marvell: save comphy_map_data priv structure
This allows the lower level driver access to comphy map data
(required for RX training support, which is introduced
in the following patches).
Change-Id: Ib7ffdc4b32076c01c3a5d33f59552c9dfc6b12fa
Signed-off-by: Igal Liberman <igall@marvell.com>
Igal Liberman [Tue, 22 Aug 2017 08:14:22 +0000 (11:14 +0300)]
phy: marvell: fix several minor bugs in comphy_probe
If fdtdec_get_int can't find speed, set COMPHY_SPEED_INVALID
If fdtdec_get_int can't find type, set COMPHY_TYPE_INVALID
Move the error print if phy-type is invalid
Add continue to the probe loop (in a case of invalid phy)
Cosmetic changes
Change-Id: I0c61b40bfe685437426fe907942ed338b7845378
Signed-off-by: Igal Liberman <igall@marvell.com>
Igal Liberman [Sun, 30 Apr 2017 17:16:55 +0000 (20:16 +0300)]
phy: marvell: cp110: utmi: update analog parameters according to latest ETP
Add UTMI analog parameters initialization values according to
latest ETP.
Change-Id: I5bcca205a3995202a18ff126f371a81f69e205c8
Signed-off-by: Igal Liberman <igall@marvell.com>
Omri Itach [Thu, 6 Apr 2017 09:54:16 +0000 (12:54 +0300)]
phy: marvell: cp110: initialize only enabled UTMI units
UTMI should be initialized only for enabled device tree nodes.
This fix overrides current internal configuration array
entry with the next DT entry data if error is detected
during the current DT entry parsing or the current port
is disabled.
This way the internal configuration structure will only
contain valid ports information obtained from the DT.
Change-Id: I9c43c6a5d234e15ae9005d1c9bc983fc1f3544b8
Signed-off-by: Omri Itach <omrii@marvell.com>
Signed-off-by: Ken Ma <make@marvell.com>
Igal Liberman [Wed, 26 Apr 2017 14:20:47 +0000 (17:20 +0300)]
phy: marvell: add missing speed during info prints
In get_speed_string() we have an array (speed_strings[])
which includes all possible speed strings.
This array size and content must be aligned to the speed
defines in comphy_data.h.
This patch adds missing 5.125G speed, aligns speed_strings[]
and fixes incorrect printing when speed > 5.0G.
Change-Id: I9900d23595094be321be0c62fcaa88036324568e
Signed-off-by: Igal Liberman <igall@marvell.com>
Igal Liberman [Wed, 26 Apr 2017 12:40:00 +0000 (15:40 +0300)]
phy: marvell: rename comphy related definitions to COMPHY_XX
Currently, all comphy definitions are PHY_TYPE_XX and PHY_SPEEED_XX.
Those definition might be confused with MDIO PHY definitions.
This patch does the following changes:
- PHY_TYPE_XX --> COMPHY_TYPE_XX
- PHY_SPEED_XX --> COMPHY_SPEED_XX
This improves readability, no functional change.
Change-Id: I2bd1d9289ebbc5c16fa80f9870f797ea1bcaf5fa
Signed-off-by: Igal Liberman <igall@marvell.com>
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
jinghua [Mon, 24 Apr 2017 07:51:03 +0000 (15:51 +0800)]
phy: marvell: add comphy type PHY_TYPE_USB3
- For some Marvell SoCs, like armada-3700, there are both
USB host and device controller, but on PHY level the
configuration is the same.
- The new type supports both USB device and USB host
- This patch is cherry-picked from u-boot-2015 as-is.
Change-Id: I01262027edd8ec23391cff6fb409b3009aedfbb9
Signed-off-by: jinghua <jinghua@marvell.com>
Signed-off-by: Ken Ma <make@marvell.com>
Reviewed-by: Igal Liberman <igall@marvell.com>
Stefan Roese [Tue, 27 Apr 2021 09:05:09 +0000 (11:05 +0200)]
arm: octeontx2: cn9130-crb.dtsi: Disable eth2 for now
Because of the incorrectly supported SGMII_2500 mode, this patch
disables eth2 for now until this issue will be fixed in mainline.
Also fix an incorrect comment.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Konstantin Porotchkin <kostap@marvell.com>
Cc: Stefan Chulski <stefanc@marvell.com>
Cc: Nadav Haklai <nadavh@marvell.com>
Cc: Marek Behun <marek.behun@nic.cz>
Konstantin Porotchkin [Tue, 16 Mar 2021 16:20:57 +0000 (17:20 +0100)]
arm: octeontx2: Add Octeon TX2 CN9130 CRB support
This patch adds the base support for the Marvell Octeon TX2 CN9130 CRB.
Not all interfaces are supported fully yet.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Konstantin Porotchkin [Tue, 16 Mar 2021 16:20:52 +0000 (17:20 +0100)]
arm: octeontx2: Add dtsi/dts files for Octeon TX2 CN9130 CRB
This patch adds the dtsi/dts files needed to support the Marvell
Octeon TX2 CN9130 CRB. This is only the base port with not all
interfaces supported fully.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Konstantin Porotchkin [Mon, 18 Jan 2021 16:35:54 +0000 (18:35 +0200)]
arm: armada: configs: Move environment location for mvebu
Move the default environment location to the end of 4MB flash
region. This change allows to accomodate larger flash boot
images making space for forthcoming code changes.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Konstantin Porotchkin [Tue, 23 Feb 2021 13:11:36 +0000 (14:11 +0100)]
arm: armada: dts: Add support for ap807-based platforms
Add support for SoCs based on AP807 die.
Remove unused include file for Armada-8020 SoC.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Konstantin Porotchkin [Sun, 17 Jan 2021 15:19:49 +0000 (17:19 +0200)]
arm: armada: dts: Use a single dtsi for cp110 die description
Use a single dtsi file for CP110 die instead of master/slave.
Moving to single file will allow miltiple DTSI inclusions with
re-defined CP index and name.
This change will also allow support for SoCs containing more than
two CP110 dies on board.
Move pin control definitions from CP110 DTS to board DTS files
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Konstantin Porotchkin [Wed, 17 Mar 2021 16:53:43 +0000 (18:53 +0200)]
cmd/mvebu: fix the bubt command
- fix the dependency for MMC boot (add XENON to MVEBU_MMC)
- fix the bubt destination assignment (missing # in "else" case)
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>